In nf_tables_newrule(), if nft_use_inc() fails, the function jumps to
the err_release_rule label without freeing the allocated flow, leading
to a memory leak.
Fix this by adding a new label err_destroy_flow and jumping to it when
nft_use_inc() fails. This ensures that the flow is properly released
in this error case.
Fixes: 1689f25924 ("netfilter: nf_tables: report use refcount overflow")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Florian Westphal <fw@strlen.de>
GPIO drivers with latch input support may miss short pulses on input
pins even when input latching is enabled. The generic interrupt logic in
the pca953x driver reports interrupts by comparing the current input
value against the previously sampled one and only signals an event when
a level change is observed between two reads.
For short pulses, the first edge is captured when the input register is
read, but if the signal returns to its previous level before the read,
the second edge is not observed. As a result, successive pulses can
produce identical input values at read time and no level change is
detected, causing interrupts to be missed. Below timing diagram shows
this situation where the top signal is the input pin level and the
bottom signal indicates the latched value.
─────┐ ┌──*───────────────┐ ┌──*─────────────────┐ ┌──*───
│ │ . │ │ . │ │ .
│ │ │ │ │ │ │ │ │
└──*──┘ │ └──*──┘ │ └──*──┘ │
Input │ │ │ │ │ │
▼ │ ▼ │ ▼ │
IRQ │ IRQ │ IRQ │
. . .
─────┐ .┌──────────────┐ .┌────────────────┐ .┌──
│ │ │ │ │ │
│ │ │ │ │ │
└────────*┘ └────────*┘ └────────*┘
Latched │ │ │
▼ ▼ ▼
READ 0 READ 0 READ 0
NO CHANGE NO CHANGE
PCAL variants provide an interrupt status register that records which
pins triggered an interrupt, but the status and input registers cannot
be read atomically. The interrupt status is only cleared when the input
port is read, and the input value must also be read to determine the
triggering edge. If another interrupt occurs on a different line after
the status register has been read but before the input register is
sampled, that event will not be reflected in the earlier status
snapshot, so relying solely on the interrupt status register is also
insufficient.
Support for input latching and interrupt status handling was previously
added by [1], but the interrupt status-based logic was reverted by [2]
due to these issues. This patch addresses the original problem by
combining both sources of information. Events indicated by the interrupt
status register are merged with events detected through the existing
level-change logic. As a result:
* short pulses, whose second edges are invisible, are detected via the
interrupt status register, and
* interrupts that occur between the status and input reads are still
caught by the generic level-change logic.
This significantly improves robustness on devices that signal interrupts
as short pulses, while avoiding the issues that led to the earlier
reversion. In practice, even if only the first edge of a pulse is
observable, the interrupt is reliably detected.
This fixes missed interrupts from an Ilitek touch controller with its
interrupt line connected to a PCAL6416A, where active-low pulses are
approximately 200 us long.
[1] commit 44896beae6 ("gpio: pca953x: add PCAL9535 interrupt support for Galileo Gen2")
[2] commit d6179f6c62 ("gpio: pca953x: Improve interrupt support")
Fixes: d6179f6c62 ("gpio: pca953x: Improve interrupt support")
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20251217153050.142057-1-ernestvanhoecke@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
We currently support sharing GPIOs between multiple devices whose drivers
use either the GPIOLIB API *OR* the reset control API but not both at
the same time.
There's an unlikely corner-case where a reset-gpios pin can be shared by
one driver using the GPIOLIB API and a second using the reset API. This
will currently not work as the reset-gpio consumers are not described in
firmware at the time of scanning so the shared GPIO just chooses one of
the proxies created for the consumers when the reset-gpio driver performs
the lookup. This can of course conflict in the case described above.
In order to fix it: if we deal with the "reset-gpios" pin that's shared
acconding to the firmware node setup, create a proxy for each described
consumer as well as another one for the potential reset-gpio device. To
that end: rework the matching to take this into account.
Fixes: 7b78b26757 ("gpio: shared: handle the reset-gpios corner case")
Link: https://lore.kernel.org/r/20251222-gpio-shared-reset-gpio-proxy-v1-3-8d4bba7d8c14@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
When matching the firmware node with the potential consumer, we
currently omit the con_id string. This can lead to false positives in
the unlikely case of the consumer having been assigned more than one
shared GPIO. Check the connector ID before proceeding.
Fixes: a060b8c511 ("gpiolib: implement low-level, shared GPIO support")
Link: https://lore.kernel.org/r/20251222-gpio-shared-reset-gpio-proxy-v1-2-8d4bba7d8c14@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The GPIO machine lookup mechanism dates back to old ARM board files
where lookup tables would all be defined in a single place. Since then,
lookup tables have also been used to address various DT and ACPI quirks
like missing GPIOs and - as of recently - setting up shared GPIO proxy
devices.
The lookup itself stops when we find the first matching table for a
consumer and - if it doesn't contain the right entry - the lookup fails.
Since the tables can now be defined in multiple places and we can't know
how many there are, effectively limiting a consumer to only a single
lookup table is no longer viable.
Rework the code to always look through all tables matching the consumer.
Link: https://lore.kernel.org/r/20251222-gpio-shared-reset-gpio-proxy-v1-1-8d4bba7d8c14@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The function bfq_bfqq_may_idle() was renamed as bfq_better_to_idle()
in commit 277a4a9b56 ("block, bfq: give a better name to
bfq_bfqq_may_idle"). Update the comment accordingly.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring_validate_mmap_request() doesn't use its size_t sz argument, so
remove it.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In line with other drivers depending on REGMAP_*, select the required
symbol to prevent a linker error when building with COMPILE_TEST=y:
ld: drivers/pinctrl/pinctrl-pic64gx-gpio2.o: in function `pic64gx_gpio2_probe':
pinctrl-pic64gx-gpio2.c:315:(.text+0x198): undefined reference to `__devm_regmap_init_mmio_clk'
Fixes: 38cf9d6413 ("pinctrl: add pic64gx "gpio2" pinmux driver")
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The -EEXIST error code is reserved by the module loading infrastructure
to indicate that a module is already loaded. When a module's init
function returns -EEXIST, userspace tools like kmod interpret this as
"module already loaded" and treat the operation as successful, returning
0 to the user even though the module initialization actually failed.
Replace -EEXIST with -EBUSY to ensure correct error reporting in the module
initialization path.
Affected modules:
* ebtable_broute ebtable_filter ebtable_nat arptable_filter
* ip6table_filter ip6table_mangle ip6table_nat ip6table_raw
* ip6table_security iptable_filter iptable_mangle iptable_nat
* iptable_raw iptable_security
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
During nft_synproxy eval we are reading nf_synproxy_info struct which
can be modified on update operation concurrently. As nf_synproxy_info
struct fits in 32 bits, use READ_ONCE/WRITE_ONCE annotations.
Fixes: ee394f96ad ("netfilter: nft_synproxy: add synproxy stateful object support")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
without 'netfilter: nft_set_pipapo: fix range overlap detection':
reject overlapping range on add 0s [FAIL]
Returned success for add { 1.2.3.4 . 1.2.4.1-1.2.4.2 } given set:
table inet filter {
[..]
elements = { 1.2.3.4 . 1.2.4.1 counter packets 0 bytes 0,
1.2.3.0-1.2.3.4 . 1.2.4.2 counter packets 0 bytes 0 }
}
The element collides with existing ones and was not added, but kernel
returned success to userspace.
Signed-off-by: Florian Westphal <fw@strlen.de>
set->klen has to be used, not sizeof(). The latter only compares a
single register but a full check of the entire key is needed.
Example:
table ip t {
map s {
typeof iifname . ip saddr : verdict
flags interval
}
}
nft add element t s '{ "lo" . 10.0.0.0/24 : drop }' # no error, expected
nft add element t s '{ "lo" . 10.0.0.0/24 : drop }' # no error, expected
nft add element t s '{ "lo" . 10.0.0.0/8 : drop }' # bug: no error
The 3rd 'add element' should be rejected via -ENOTEMPTY, not -EEXIST,
so userspace / nft can report an error to the user.
The latter is only correct for the 2nd case (re-add of existing element).
As-is, userspace is told that the command was successful, but no elements were
added.
After this patch, 3rd command gives:
Error: Could not process rule: File exists
add element t s { "lo" . 127.0.0.0/8 . "lo" : drop }
^^^^^^^^^^^^^^^^^^^^^^^^^
Fixes: 0eb4b5ee33 ("netfilter: nft_set_pipapo: Separate partial and complete overlap cases on insertion")
Signed-off-by: Florian Westphal <fw@strlen.de>
Add headset mic quirk for Acer Nitro AN517-55. This laptop uses
the same audio configuration as the AN515-58 model.
Signed-off-by: Matouš Lánský <matouslansky@post.cz>
Link: https://patch.msgid.link/20251231171207.76943-1-matouslansky@post.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
kvm_async_pf_queue_task() can incorrectly try to kfree() a node
allocated on the stack of kvm_async_pf_task_wait_schedule().
This occurs when a task requests a PF while another task's PF request
with the same token is still pending. Since the token is derived from
the (u32)address in exc_page_fault(), two different tasks can generate
the same token.
Currently, kvm_async_pf_queue_task() assumes that any entry found in the
list is a dummy entry and tries to kfree() it. To fix this, add a flag
to the node structure to distinguish stack-allocated nodes, and only
kfree() the node if it is a dummy entry.
Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com>
Message-ID: <20251206140939.144038-1-ryasuoka@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
drm-misc-fixes for v6.19-rc4:
- Documentation fixes and MODULE_LICENSE fix for shmem helper.
- Fix warnings in nouveau prepare_fb().
- Prevent export of protected objects in imagination driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/5506492b-02ca-47bc-8712-51e67f0e4b8b@linux.intel.com
An extra blank line gets printed after printing firmware version
because the build date is null terminated. Remove the "\n" from
dev_info() calls to print firmware version and build date to fix
the problem.
Reported-by: Mario Limonciello <superm1@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jump to the existing dev_put label when devm_request_irq() fails
so drm_dev_put() and of_reserved_mem_device_release() run
instead of returning early and leaking resources.
Found via static analysis and code review.
Fixes: bed41005e6 ("drm/pl111: Initial drm/kms driver for pl111")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251211123345.2392065-1-linmq006@gmail.com
Developers run into bouncing emails from my old address,
so add it to .mailmap. Stuff in the rest of my old mail
addresses as well while we're at it.
Reported-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
When building kselftests with a toolchain that enables source
fortification (e.g., Android's build environment, which uses
-D_FORTIFY_SOURCE=3), a build failure occurs in tests that use an
empty FIXTURE().
The root cause is that an empty fixture struct results in
`sizeof(self_private)` evaluating to 0. The compiler's fortification
checks then detect the `memset()` call with a compile-time constant size
of 0, issuing a `-Wuser-defined-warnings` which is promoted to an error
by `-Werror`.
An initial attempt to guard the call with `if (sizeof(self_private) > 0)`
was insufficient. The compiler's static analysis is aggressive enough
to flag the `memset(..., 0)` pattern before evaluating the conditional,
thus still triggering the error.
To resolve this robustly, this change introduces a `static inline`
helper function, `__kselftest_memset_safe()`. This function wraps the
size check and the `memset()` call. By replacing the direct `memset()`
in the `__TEST_F_IMPL` macro with a call to this helper, we create an
abstraction boundary. This prevents the compiler's static analyzer from
"seeing" the problematic pattern at the macro expansion site, resolving
the build failure.
Build Context:
Compiler: Android (14488419, +pgo, +bolt, +lto, +mlgo, based on r584948) clang version 22.0.0 (https://android.googlesource.com/toolchain/llvm-project 2d65e4108033380e6fe8e08b1f1826cd2bfb0c99)
Relevant Options: -O2 -Wall -Werror -D_FORTIFY_SOURCE=3 -target i686-linux-android10000
Test: m kselftest_futex_futex_requeue_pi
Removed Gerrit Change-Id
Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20251224084120.249417-1-wakel@google.com
Signed-off-by: Wake Liu <wakel@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fixes and New HW Support
- alienware-wmi-wmax: Area-51, x16, and 16X Aurora laptops support
- asus-armoury:
- Fix FA507R PPT data
- Add TDP data for more laptop models
- asus-nb-wmi: Asus Zenbook 14 display toggle key support
- dell-lis3lv02d: Dell Latitude 5400 support
- hp-bioscfg: Fix out-of-bounds array access in ACPI package parsing
- ibm_rtl: Fix EBDA signature search pointer arithmetic
- ideapad-laptop: Reassign KEY_CUT to KEY_SELECTIVE_SCREENSHOT
- intel/pmt:
- Fix kobject memory leak on init failure
- Use valid pointers on error handling path
- intel/vsec: Correct kernel doc comments
- mellanox: mlxbf-pmc: Fix event names
- msi-laptop: Add sysfs_remove_group()
- samsumg-galaxybook: Do not cast pointer to a shorter type
- think-lmi: WMI certificate thumbprint support for ThinkCenter
- uniwill: Tuxedo Book BA15 Gen10 support
The following is an automated shortlog grouped by driver:
alienware-wmi-wmax:
- Add AWCC support for Alienware x16
- Add support for Alienware 16X Aurora
- Add support for new Area-51 laptops
asus-armoury:
- add support for FA608UM
- add support for G615LR
- add support for G835LW
- add support for GA403WR
- add support for GU605CR
- fix ppt data for FA507R
asus-nb-wmi:
- Add keymap for display toggle
dell-lis3lv02d:
- Add Latitude 5400
hp-bioscfg:
- Fix out-of-bounds array access in ACPI package parsing
ibm_rtl:
- fix EBDA signature search pointer arithmetic
ideapad-laptop:
- Reassign KEY_CUT to KEY_SELECTIVE_SCREENSHOT
intel/pmt/discovery:
- use valid device pointer in dev_err_probe
intel/pmt:
- Fix kobject memory leak on init failure
intel/vsec:
- correct kernel-doc comments
mlxbf-pmc:
- Remove trailing whitespaces from event names
msi-laptop:
- add missing sysfs_remove_group()
samsung-galaxybook:
- Fix problematic pointer cast
think-lmi:
- Add WMI certificate thumbprint support for ThinkCenter
uniwill:
- Add TUXEDO Book BA15 Gen10
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaVT4igAKCRBZrE9hU+XO
MTB4AQCIWd1/VEyiHw7nLVraCvVcG25m+E61XkALpP3KHzuWsAD/ejev+eNcng9W
G+TnUShOsVJ3w++juDHX1PNG7CSNqQ4=
=tvjU
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- alienware-wmi-wmax: Area-51, x16, and 16X Aurora laptops support
- asus-armoury:
- Fix FA507R PPT data
- Add TDP data for more laptop models
- asus-nb-wmi: Asus Zenbook 14 display toggle key support
- dell-lis3lv02d: Dell Latitude 5400 support
- hp-bioscfg: Fix out-of-bounds array access in ACPI package parsing
- ibm_rtl: Fix EBDA signature search pointer arithmetic
- ideapad-laptop: Reassign KEY_CUT to KEY_SELECTIVE_SCREENSHOT
- intel/pmt:
- Fix kobject memory leak on init failure
- Use valid pointers on error handling path
- intel/vsec: Correct kernel doc comments
- mellanox: mlxbf-pmc: Fix event names
- msi-laptop: Add sysfs_remove_group()
- samsumg-galaxybook: Do not cast pointer to a shorter type
- think-lmi: WMI certificate thumbprint support for ThinkCenter
- uniwill: Tuxedo Book BA15 Gen10 support
* tag 'platform-drivers-x86-v6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (22 commits)
platform/x86: asus-armoury: add support for G835LW
platform/x86: asus-armoury: fix ppt data for FA507R
platform/x86/intel/pmt/discovery: use valid device pointer in dev_err_probe
platform/x86: hp-bioscfg: Fix out-of-bounds array access in ACPI package parsing
platform/x86: asus-armoury: add support for G615LR
platform/x86: asus-armoury: add support for FA608UM
platform/x86: asus-armoury: add support for GA403WR
platform/x86: asus-armoury: add support for GU605CR
platform/x86: ideapad-laptop: Reassign KEY_CUT to KEY_SELECTIVE_SCREENSHOT
platform/x86: samsung-galaxybook: Fix problematic pointer cast
platform/x86/intel/pmt: Fix kobject memory leak on init failure
platform/x86/intel/vsec: correct kernel-doc comments
platform/x86: ibm_rtl: fix EBDA signature search pointer arithmetic
platform/x86: msi-laptop: add missing sysfs_remove_group()
platform/x86: think-lmi: Add WMI certificate thumbprint support for ThinkCenter
platform/x86: dell-lis3lv02d: Add Latitude 5400
platform/mellanox: mlxbf-pmc: Remove trailing whitespaces from event names
platform/x86: asus-nb-wmi: Add keymap for display toggle
platform/x86/uniwill: Add TUXEDO Book BA15 Gen10
platform/x86: alienware-wmi-wmax: Add support for Alienware 16X Aurora
...
'available_events' is actually not required by
'test.d/event/toplevel-enable.tc' and its Existence has been tested in
'test.d/00basic/basic4.tc'.
So the require of 'available_events' can be dropped and then we can add
'instance' flag to test 'test.d/event/toplevel-enable.tc' for instance.
Test result show as below:
# ./ftracetest test.d/event/toplevel-enable.tc
=== Ftrace unit tests ===
[1] event tracing - enable/disable with top level files [PASS]
[2] (instance) event tracing - enable/disable with top level files [PASS]
# of passed: 2
# of failed: 0
# of unresolved: 0
# of untested: 0
# of unsupported: 0
# of xfailed: 0
# of undefined(test bug): 0
Link: https://lore.kernel.org/r/20230509203659.1173917-1-zhengyejian1@huawei.com
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
- Restrict ROM access to dword to resolve a regression introduced
with qword access seen on some Intel NICs. Update VGA region
access to the same given lack of precedent for 64-bit users.
(Kevin Tian)
- Fix missing .get_region_info_caps callback in the xe-vfio-pci
variant driver due to integration through the DRM tree.
(Michal Wajdeczko)
- Add aligned 64-bit access macros to tools/include/linux/types.h,
allowing removal of uapi/linux/type.h includes from various
vfio selftest, resolving redefinition warnings for integration
with KVM selftests. (David Matlack)
- Fix error path memory leak in pds-vfio-pci variant driver.
(Zilin Guan)
- Fix error path use-after-free in xe-vfio-pci variant driver.
(Alper Ak)
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEQvbATlQL0amee4qQI5ubbjuwiyIFAmlUP2oRHGFsZXhAc2hh
emJvdC5vcmcACgkQI5ubbjuwiyKYsw//fEJ6vfn0TOP/ahfY9tRpw6suZJuEo5wx
SJj57kMF85/V64iaewRq1G1hbrEAEcOgDtpcR3y57lHAS8METKxyjxL5YZdqvgX4
kRvDwRJRcFz/kvmO0PZx6rn21ZxLv2d9RXahDwaqaQfw2pR2ZOtr/zaawMr6LPmw
Z1dl0UhQnHIhw4kG1QKUhdCozhAgSV3/pmGV2bOjgXRS0rVUZ3UQZ0RprLe6uIEl
hSWLmeWUtyrt30gVzoKPTWWuRvuIw2lnAH2PGhNtha70Djyx1EAUs7iqUA8XBsQh
7JG/T1yibh9CzE5OzI+JBmix5s8zxd4q0RHNa9T31EMHSdzCJhXQfLiZVeJVv9O6
EHsFVWHzE4CXgSMEpD+QjfCrEwBcF4n6W6N68BFAuAVN51+0DoFinFF0PaqpTivj
U/Yh1erkfFhy8IlO33Q2dAOxBfy1aIkszKS2Xkc1pwX3vReMlHiWDmyM5ciB0VKJ
GwslXQwGljSNuxE81e7EFI6g18FGGLGt5EkkYPhSS/hYAZQy0RpqPdRopcP85OiO
HtyfZZZ/Ph0y13f7c7rH5awGm9NOc9W+2xNKxuKNkjwvEmjO12lRmrzGkKPu/OTi
YluIWSFG7gBQfb8eFgcfJoM7vcrRCJ+JeSp5fa7u8QLUsTk+var+/WCxKs9BpX31
hDb8rHj0Bwo=
=a1By
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.19-rc4' of https://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- Restrict ROM access to dword to resolve a regression introduced with
qword access seen on some Intel NICs. Update VGA region access to the
same given lack of precedent for 64-bit users (Kevin Tian)
- Fix missing .get_region_info_caps callback in the xe-vfio-pci variant
driver due to integration through the DRM tree (Michal Wajdeczko)
- Add aligned 64-bit access macros to tools/include/linux/types.h,
allowing removal of uapi/linux/type.h includes from various vfio
selftest, resolving redefinition warnings for integration with KVM
selftests (David Matlack)
- Fix error path memory leak in pds-vfio-pci variant driver (Zilin Guan)
- Fix error path use-after-free in xe-vfio-pci variant driver (Alper Ak)
* tag 'vfio-v6.19-rc4' of https://github.com/awilliam/linux-vfio:
vfio/xe: Fix use-after-free in xe_vfio_pci_alloc_file()
vfio/pds: Fix memory leak in pds_vfio_dirty_enable()
vfio: selftests: Drop <uapi/linux/types.h> includes
tools include: Add definitions for __aligned_{l,b}e64
vfio/xe: Add default handler for .get_region_info_caps
vfio/pci: Disable qword access to the VGA region
vfio/pci: Disable qword access to the PCI ROM bar
A small collection of driver speciifc fixes, mostly relatively minor,
plus an adjustment to the topology file naming for Intel systems with
Bluetooth required for disambiguation.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmlVG44ACgkQJNaLcl1U
h9BxIwf7BpTYRUkdXlG9J3/TYe3kfiXati5FP+TPAcuXi3+oNqD6nfpFkh1P20Dj
su17vtFP8u5VMI1jkI9cYmXudlodEcDgAbJjnzs5hsQG43XDb8S1U19omkpnUCpY
zISQEtmlRk+8kqF8wslZm4ZQ+h8KMqEnbnC2lT5B9iFyE+u5nz1hkL5V9LMKjdqa
GbzNZEHJakLpDkCAbFx4eJBpkeF57/Feeom+RGK7Se4P07C4Ng/Hdy1D7m2EpNTh
VvG53/z0SUAYkfpeBqk3xPSnicPnWZEeDSyBPDGEhJ+TBa9SeAZqd/V3+2piRu2Y
qP7FVeMTLQGlH8dr9eTx2yP8Q5zwWg==
=NL1Y
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.19
A small collection of driver speciifc fixes, mostly relatively minor,
plus an adjustment to the topology file naming for Intel systems with
Bluetooth required for disambiguation.
Pull MD fixes from Yu Kuai:
"- Fix null-pointer dereference in raid5 sysfs group_thread_cnt store
(Tuo Li)
- Fix possible mempool corruption during raid1 raid_disks update via
sysfs (FengWei Shih)
- Fix logical_block_size configuration being overwritten during
super_1_validate() (Li Nan)
- Fix forward incompatibility with configurable logical block size:
arrays assembled on new kernels could not be assembled on kernels
<=6.18 due to non-zero reserved pad rejection (Li Nan)
- Fix static checker warning about iterator not incremented (Li Nan)"
* tag 'md-6.19-20251231' of gitolite.kernel.org:pub/scm/linux/kernel/git/mdraid/linux:
md: Fix forward incompatibility from configurable logical block size
md: Fix logical_block_size configuration being overwritten
md: suspend array while updating raid_disks via sysfs
md/raid5: fix possible null-pointer dereferences in raid5_store_group_thread_cnt()
md: Fix static checker warning in analyze_sbs
Initialize the eb.vma array with values of 0 when the eb structure is
first set up. In particular, this sets the eb->vma[i].vma pointers to
NULL, simplifying cleanup and getting rid of the bug described below.
During the execution of eb_lookup_vmas(), the eb->vma array is
successively filled up with struct eb_vma objects. This process includes
calling eb_add_vma(), which might fail; however, even in the event of
failure, eb->vma[i].vma is set for the currently processed buffer.
If eb_add_vma() fails, eb_lookup_vmas() returns with an error, which
prompts a call to eb_release_vmas() to clean up the mess. Since
eb_lookup_vmas() might fail during processing any (possibly not first)
buffer, eb_release_vmas() checks whether a buffer's vma is NULL to know
at what point did the lookup function fail.
In eb_lookup_vmas(), eb->vma[i].vma is set to NULL if either the helper
function eb_lookup_vma() or eb_validate_vma() fails. eb->vma[i+1].vma is
set to NULL in case i915_gem_object_userptr_submit_init() fails; the
current one needs to be cleaned up by eb_release_vmas() at this point,
so the next one is set. If eb_add_vma() fails, neither the current nor
the next vma is set to NULL, which is a source of a NULL deref bug
described in the issue linked in the Closes tag.
When entering eb_lookup_vmas(), the vma pointers are set to the slab
poison value, instead of NULL. This doesn't matter for the actual
lookup, since it gets overwritten anyway, however the eb_release_vmas()
function only recognizes NULL as the stopping value, hence the pointers
are being set to NULL as they go in case of intermediate failure. This
patch changes the approach to filling them all with NULL at the start
instead, rather than handling that manually during failure.
Reported-by: Gangmin Kim <km.kim1503@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15062
Fixes: 544460c338 ("drm/i915: Multi-BB execbuf")
Cc: stable@vger.kernel.org # 5.16.x
Signed-off-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Reviewed-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251216180900.54294-2-krzysztof.niemiec@intel.com
(cherry picked from commit 08889b706d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Ensure that in the ftrace direct call logic, the CPU register state
(with ra = parent return address) is restored to the correct state after
the execution of the custom trampoline function and before returning to
the traced function. Additionally, guarantee the correctness of the jump
logic for jr t0 (traced function address).
Cc: stable@vger.kernel.org
Fixes: 9cdc3b6a29 ("LoongArch: ftrace: Add direct call support")
Reported-by: Youling Tang <tangyouling@kylinos.cn>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Enhance the bpf_arch_text_poke() function to enable accurate location
of BPF program entry points.
When modifying the entry point of a BPF program, skip the "move t0, ra"
instruction to ensure the correct logic and copy of the jump address.
Cc: stable@vger.kernel.org
Fixes: 677e6123e3 ("LoongArch: BPF: Disable trampoline for kernel module function trace")
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Remove the previous restrictions that blocked the tracing of kernel
module functions. Fix the issue that previously caused kernel lockups
when attempting to trace module functions.
Before entering the trampoline code, the return address register ra
shall store the address of the next assembly instruction after the
'bl trampoline' instruction, which is the traced function address, and
the register t0 shall store the parent function return address. Refine
the trampoline return logic to ensure that register data remains correct
when returning to both the traced function and the parent function.
Before this patch was applied, the module_attach test in selftests/bpf
encountered a deadlock issue. This was caused by an incorrect jump
address after the trampoline execution, which resulted in an infinite
loop within the module function.
Cc: stable@vger.kernel.org
Fixes: 677e6123e3 ("LoongArch: BPF: Disable trampoline for kernel module function trace")
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Call the next bpf prog and skip the first instruction of TCC
initialization.
A total of 7 instructions are skipped:
'move t0, ra' 1 inst
'move_imm + jirl' 5 inst
'addid REG_TCC, zero, 0' 1 inst
Relevant test cases: the tailcalls test item in selftests/bpf.
Cc: stable@vger.kernel.org
Fixes: 677e6123e3 ("LoongArch: BPF: Disable trampoline for kernel module function trace")
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Modify the build_prologue() function to ensure the return address
register ra is saved to t0 before entering trampoline operations.
This change ensures the accurate return address handling when a BPF
program calls another BPF program, preventing errors in the BPF-to-BPF
call chain.
Cc: stable@vger.kernel.org
Fixes: 677e6123e3 ("LoongArch: BPF: Disable trampoline for kernel module function trace")
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The bpf_tail_call() index should be treated as a u32 value. Let's
zero-extend it to avoid calling wrong BPF progs. See similar fixes
for x86 [1]) and arm64 ([2]) for more details.
[1]: 90caccdd8c
[2]: 16338a9b3a
Cc: stable@vger.kernel.org
Fixes: 5dc615520c ("LoongArch: Add BPF JIT support")
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The kfunc calls are native calls so they should follow LoongArch calling
conventions. Sign extend its arguments properly to avoid kernel panic.
This is done by adding a new emit_abi_ext() helper. The emit_abi_ext()
helper performs extension in place meaning a value already store in the
target register (Note: this is different from the existing sign_extend()
helper and thus we can't reuse it).
Cc: stable@vger.kernel.org
Fixes: 5dc615520c ("LoongArch: Add BPF JIT support")
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Refactor the register restoration sequence in the ftrace_common_return
function to clearly distinguish between the logic of normal returns and
direct call returns in function tracing scenarios. The logic is as
follows:
1. In the case of a normal return, the execution flow returns to the
traced function, and ftrace must ensure that the register data is
consistent with the state when the function was entered.
ra = parent return address; t0 = traced function return address.
2. In the case of a direct call return, the execution flow jumps to the
custom trampoline function, and ftrace must ensure that the register
data is consistent with the state when ftrace was entered.
ra = traced function return address; t0 = parent return address.
Cc: stable@vger.kernel.org
Fixes: 9cdc3b6a29 ("LoongArch: ftrace: Add direct call support")
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
This patch allows the LoongArch BPF JIT to handle recoverable memory
access errors generated by BPF_PROBE_MEM* instructions.
When a BPF program performs memory access operations, the instructions
it executes may trigger ADEM exceptions. The kernel’s built-in BPF
exception table mechanism (EX_TYPE_BPF) will generate corresponding
exception fixup entries in the JIT compilation phase; however, the
architecture-specific trap handling function needs to proactively call
the common fixup routine to achieve exception recovery.
do_ade(): fix EX_TYPE_BPF memory access exceptions for BPF programs,
ensure safe execution.
Relevant test cases: illegal address access tests in module_attach and
subprogs_extable of selftests/bpf.
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
According to the following function definitions, __kernel_text_address()
already checks __module_text_address(), so it should remove the check of
__module_text_address() in bt_address() at least.
int __kernel_text_address(unsigned long addr)
{
if (kernel_text_address(addr))
return 1;
...
return 0;
}
int kernel_text_address(unsigned long addr)
{
bool no_rcu;
int ret = 1;
...
if (is_module_text_address(addr))
goto out;
...
return ret;
}
bool is_module_text_address(unsigned long addr)
{
guard(rcu)();
return __module_text_address(addr) != NULL;
}
Furthermore, there are two checks of __kernel_text_address(), one is in
bt_address() and the other is after calling bt_address(), it looks like
redundant.
Handle the exception address first and then use __kernel_text_address()
to validate the calculated address for exception or the normal address
in bt_address(), then it can remove the check of __kernel_text_address()
after calling bt_address().
Just remove unnecessary checks, no functional changes intended.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
kernel_entry() and smpboot_entry() are the last frames for ORC unwinder,
so it is proper to use the annotation UNWIND_HINT_END_OF_STACK for them.
Link: https://lore.kernel.org/lkml/ots6w2ntyudj5ucs5eowncta2vmfssatpcqwzpar3ekk577hxi@j45dd4dmwx6x/
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
For 32BIT platform _PAGE_PROTNONE is 0, so set a VMA to be VM_NONE or
VM_SHARED will make pages non-present, then cause Oops with kernel page
fault.
Fix it by set correct protection_map[] for VM_NONE/VM_SHARED, replacing
_PAGE_PROTNONE with _PAGE_PRESENT.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
According to the "LoongArch Reference Manual Volume 1: Basic
Architecture", begin with LA664 CPU core there are more features
supported which are indicated in CPUCFG2 and CPUCFG3. This patch
completes the definitions of them so as to match the architecture
specification.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Clang misinterprets the placement of test_kprobes_addresses and
test_kprobes_functions arrays when they are not explicitly assigned
to a data section. This can lead to kmalloc_array() allocation
errors and KUnit failures.
When testing the Clang-compiled code in QEMU, this warning was emitted:
WARNING: CPU: 1 PID: 3000 at mm/page_alloc.c:5159 __alloc_frozen_pages_noprof+0xe6/0x2fc mm/page_alloc.c:5159
Further investigation revealed that the test_kprobes_addresses array
appeared to have over 100,000 elements, including invalid addresses;
whereas, according to test-kprobes-asm.S, test_kprobes_addresses
should only have 25 elements.
When compiling the kernel with GCC, the kernel boots correctly.
This patch fixes the issue by adding .section .rodata to explicitly
place arrays in the read-only data segment.
For detailed debug and analysis, see:
https://github.com/j1akai/temp/blob/main/20251113/readme.md
v1 -> v2：
- Drop changes to .align, and .globl.
Signed-off-by: Jiakai Xu <xujiakai2025@iscas.ac.cn>
Signed-off-by: Jiakai Xu <jiakaiPeanut@gmail.com>
Link: https://patch.msgid.link/738dd4e2.ff73.19a7cd7b4d5.Coremail.xujiakai2025@iscas.ac.cn
Link: https://github.com/llvm/llvm-project/issues/168308
Link: https://patch.msgid.link/20251226032317.1523764-1-jiakaiPeanut@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The syscall number is a user-controlled value used to index into the
syscall table. Use array_index_nospec() to clamp this value after the
bounds check to prevent speculative out-of-bounds access and subsequent
data leakage via cache side channels.
Signed-off-by: Lukas Gerlach <lukas.gerlach@cispa.de>
Link: https://patch.msgid.link/20251218191332.35849-3-lukas.gerlach@cispa.de
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Since commit 4b47a3aefb ("kbuild: Restore pattern to avoid stripping
.rela.dyn from vmlinux") vmlinux has .rel*.dyn preserved. Therefore, use
vmlinux to produce Image, not vmlinux.unstripped.
Doing so fixes booting a RELOCATABLE=y Image with kexec. The problem is
caused by this chain of events:
- Since commit 3e86e4d74c ("kbuild: keep .modinfo section in
vmlinux.unstripped"), vmlinux.unstripped gets a .modinfo section.
- The .modinfo section has SHF_ALLOC, so it ends up in Image, at the end
of it.
- The Image header's image_size field does not expect to include
.modinfo and does not account for it, since it should not be in Image.
- If .modinfo is large enough, the file size of Image ends up larger
than image_size, which eventually leads to it failing
sanity_check_segment_list().
Using vmlinux instead of vmlinux.unstripped means that the unexpected
.modinfo section is gone from Image, fixing the file size problem.
Cc: stable@vger.kernel.org
Fixes: 3e86e4d74c ("kbuild: keep .modinfo section in vmlinux.unstripped")
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Han Gao <gaohan@iscas.ac.cn>
Link: https://patch.msgid.link/20251230-riscv-vmlinux-not-unstripped-v1-1-15f49df880df@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
A set of NFSD fixes that arrived just a bit late for the 6.19 merge
window.
Issues reported with v6.19-rc:
- Avoid unnecessarily breaking a timestamp delegation
Issues that need expedient stable backports:
- Fix a crasher in nlm4svc_proc_test()
- Fix nfsd_file reference leak during write delegation
- Fix error flow in client_states_open()
-----BEGIN PGP SIGNATURE-----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=QzWs
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"A set of NFSD fixes that arrived just a bit late for the 6.19 merge
window.
Regression fix:
- Avoid unnecessarily breaking a timestamp delegation
Stable fixes:
- Fix a crasher in nlm4svc_proc_test()
- Fix nfsd_file reference leak during write delegation
- Fix error flow in client_states_open()"
* tag 'nfsd-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: Drop the client reference in client_states_open()
nfsd: use ATTR_DELEG in nfsd4_finalize_deleg_timestamps()
nfsd: fix nfsd_file reference leak in nfsd4_add_rdaccess_to_wrdeleg()
lockd: fix vfs_test_lock() calls
