cpuset_can_attach() currently adds the bandwidth of all migrating
SCHED_DEADLINE tasks to sum_migrate_dl_bw. If the source and destination
cpuset effective CPU masks do not overlap, the whole sum is then
reserved in the destination root domain.
set_cpus_allowed_dl(), however, subtracts bandwidth from the source
root domain only when the affinity change really moves the task between
root domains. A DL task can move between cpusets that are still in the
same root domain, so including that task in sum_migrate_dl_bw can reserve
destination bandwidth without a matching source-side subtraction.
Share the root-domain move test with set_cpus_allowed_dl(). Keep
nr_migrate_dl_tasks counting all migrating deadline tasks for cpuset DL
task accounting, but add to sum_migrate_dl_bw only for tasks that need a
root-domain bandwidth move. Keep using the destination cpuset effective
CPU mask and leave the broader can_attach()/attach() transaction model
unchanged.
Fixes: 2ef269ef1a ("cgroup/cpuset: Free DL BW in case can_attach() fails")
Cc: stable@vger.kernel.org # v6.10+
Signed-off-by: Guopeng Zhang <zhangguopeng@kylinos.cn>
Reviewed-by: Waiman Long <longman@redhat.com>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When decoding osd_state and osd_weight from an incoming osdmap in
osdmap_decode(), both are decoded for each osd, i.e., map->max_osd
times. The ceph_decode_need() check only accounts for
sizeof(*map->osd_weight) once. This can potentially result in an
out-of-bounds memory access if the incoming message is corrupted such
that the max_osd value exceeds the actual content of the osdmap message.
This patch fixes the issue by changing the corresponding part in the
ceph_decode_need() check to account for
map->max_osd*sizeof(*map->osd_weight).
Cc: stable@vger.kernel.org
Fixes: dcbc919a5d ("libceph: switch osdmap decoding to use ceph_decode_entity_addr")
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
io_uring_try_cancel_requests() dropped ctx->uring_lock before calling
io_kill_timeouts(), which walks each timeout's link chain via
io_match_task() to test REQ_F_INFLIGHT. With chain mutation now
serialized by ctx->uring_lock, that walk needs the lock too.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_link_timeout_fn() is the hrtimer callback that fires when a linked
timeout expires. It currently calls io_remove_next_linked(prev) under
ctx->timeout_lock to splice the timeout request out of the link chain.
This is the only chain-mutation site that runs without ctx->uring_lock,
because hrtimer callbacks cannot take a mutex. Defer the splicing until
the task_work callback.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_wq_free_work() calls io_req_find_next() from io-wq worker context,
which reads and clears req->link without holding any lock. This can
potentially race with other paths that mutate the same chain under
ctx->uring_lock.
Take ctx->uring_lock around the io_req_find_next() call. Only requests
with IO_REQ_LINK_FLAGS reach this path, which is not the hot path.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a controller connects, nvme_start_ctrl() emits the
"NVME_EVENT=connected" uevent and sets the NVME_CTRL_STARTED_ONCE flag.
Currently, the uevent is emitted before the flag is set. This creates a
race condition for userspace tools (like udev rules) that might rely on
the "connected" event to configure other attributes.
Swap the order of operations in nvme_start_ctrl() so that the
NVME_CTRL_STARTED_ONCE flag is set before the uevent is sent. This
guarantees that the admin_timeout can already be changed when userspace
is notified.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Since every platform driver can be forced to match a device that doesn't
match its list of device IDs because of device_match_driver_override(),
platform drivers that rely on the existence of a device's ACPI companion
object should verify its presence.
Accordingly, add requisite ACPI_COMPANION() or ACPI_HANDLE() checks
against NULL to 13 platform drivers handling core ACPI devices.
Also change the value returned by the ACPI thermal zone driver when
the device's ACPI companion is not present to -ENODEV for consistency
with the other drivers.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/4516068.ejJDZkT8p0@rafael.j.wysocki
Cc: 7.0+ <stable@vger.kernel.org> # 7.0+
When an already-exiting task oopses, make_task_dead() currently calls
do_task_dead() with preemption enabled. That is forbidden:
do_task_dead() calls __schedule(), which has a comment saying "WARNING:
must be called with preemption disabled!".
If an oopsing task is preempted in do_task_dead(), between becoming
TASK_DEAD and entering the scheduler explicitly, bad things happen:
finish_task_switch() assumes that once the scheduler has switched away
from a TASK_DEAD task, the task can never run again and its stack is no
longer needed; but that assumption apparently doesn't hold if the dead
task was preempted (the SM_PREEMPT case).
This means that the scheduler ends up repeatedly dropping references on
the dead task's stack, which can lead to use-after-free or double-free
of the entire task stack; in other words, two tasks can end up running
on the same stack, resulting in various kinds of memory corruption.
(This does not just affect "recursively oopsing" tasks; it is enough to
oops once during task exit, for example in a file_operations::release
handler)
Fixes: 7f80a2fd7d ("exit: Stop poorly open coding do_task_dead in make_task_dead")
Cc: stable@kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 7f991e3f9b ("nvme: add quirk
NVME_QUIRK_IGNORE_DEV_SUBNQN for 144d:a808")
The incorrect implementations of SUBNQN is a known issue in a massive number of
NVMe units. However, the warning "nvme nvmex: missing or invalid SUBNQN field."
is usually appropriate and will not affect performance or behavior etc. That is
because the support for SUBNQN is mandatory if the controller supports NVMe
revision 1.2.1 or greater, and it reported itself without a SUBNQN field which
breaks compliance with the specification. It should be not quirked by the Linux
Kernel.
Signed-off-by: Alan Cui <me@alancui.cc>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Shivam Kumar found via vulnerability testing:
When data digest is enabled on an NVMe/TCP connection and a digest
mismatch occurs on a non-final H2C_DATA PDU during an R2T-based
data transfer, the digest error handler in nvmet_tcp_try_recv_ddgst()
calls nvmet_req_uninit() — which performs percpu_ref_put() on the
submission queue — but does NOT mark the command as completed. It
does not set cqe->status, does not modify rbytes_done, and does not
clear any flag. When the subsequent fatal error triggers queue
teardown, nvmet_tcp_uninit_data_in_cmds() iterates all commands,
checks nvmet_tcp_need_data_in() for each one, and finds that the
already-uninited command still appears to need data (because
rbytes_done < transfer_len and cqe->status == 0). It therefore calls
nvmet_req_uninit() a second time on the same command — a double
percpu_ref_put against a single percpu_ref_get.
Reported-by: Shivam Kumar <kumar.shivam43666@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvme_free_host_mem() frees dev->hmb_sgt via dma_free_noncontiguous()
but never clears the pointer afterward. This leads to a use-after-free
if nvme_free_host_mem() is called twice in the same error path.
This can happen during nvme_probe() when nvme_setup_host_mem() succeeds
in allocating the HMB (setting dev->hmb_sgt) but nvme_set_host_mem()
fails with an I/O error:
nvme_setup_host_mem()
nvme_alloc_host_mem_single() -> sets dev->hmb_sgt
nvme_set_host_mem() -> fails with -EIO
nvme_free_host_mem() -> frees hmb_sgt, but does NOT NULL it
return error
nvme_probe() error path:
nvme_free_host_mem() -> dev->hmb_sgt is stale, use-after-free
The second call dereferences the freed sgt, causing a NULL pointer
dereference in iommu_dma_free_noncontiguous() when it accesses
sgt->sgl->dma_address (the backing memory has been freed and zeroed).
This is reproducible on Thunderbolt-attached NVMe devices (e.g., OWC
Envoy Express behind a Dell WD22TB4 dock) where the device intermittently
returns I/O errors during HMB setup due to PCIe link instability.
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: 0010:iommu_dma_free_noncontiguous+0x22/0x80
Call Trace:
<TASK>
dma_free_noncontiguous+0x3b/0x130
nvme_free_host_mem+0x30/0xf0 [nvme]
nvme_probe.cold+0xcc/0x275 [nvme]
local_pci_probe+0x43/0xa0
pci_device_probe+0xeea/0x290
really_probe+0xf9/0x3b0
__driver_probe_device+0x8b/0x170
driver_probe_device+0x24/0xd0
__driver_attach_async_helper+0x6b/0x110
async_run_entry_fn+0x37/0x170
process_one_work+0x1ac/0x3d0
worker_thread+0x1b8/0x360
kthread+0xf7/0x130
ret_from_fork+0x2d8/0x3a0
ret_from_fork_asm+0x1a/0x30
</TASK>
Fix this by setting dev->hmb_sgt to NULL after freeing it, so the
second call takes the multi-descriptor path which safely handles the
already-cleaned-up state.
Fixes: 63a5c7a4b4 ("nvme-pci: use dma_alloc_noncontigous if possible")
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
From a security standpoint we should not allow to print out the DH-HMAC-CHAP
secrets, but at the same time having them is useful for debugging
authentication failures.
So add a Kconfig option NVME_TARGET_AUTH_DEBUG to only enable debugging
if explictly requested at build time.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The local bio is always NULL, so we'd leak the bio if the integrity
mapping failed. Just get it directly from the request.
Fixes: d0d1d52231 ("blk-map: provide the bdev to bio if one exists")
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The warning is a bit alarming, and it only prints for the very first
non-sgl capable device that receives a passthrough command. Just log an
informational message on initial discovery for every device.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
check_mft_mirror() still computes the number of bytes to validate in each
mirrored MFT record, but the actual comparison against $MFTMirr was dropped
when the superblock code was updated.
As a result, mount misses a stale or inconsistent $MFTMirr as long as both
records pass the structural baad-record checks. Restore the comparison and
log an error when the primary $MFT record differs from its mirror copy.
Returning false lets the existing mount error handling mark the volume as
having NTFS errors and, with on_errors=remount-ro, continue read-only. The
default on_errors=continue mount policy still allows the mount to proceed.
Fixes: 6251f0b0de ("ntfs: update super block operations")
Signed-off-by: DaeMyung Kang <charsyam@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
On PREEMPT_RT, non-HARD irq_work runs in per-CPU kthreads via
run_irq_workd(), so irq_work_sync() uses rcuwait() to wait for BUSY==0.
After irq_work_single() clears BUSY via atomic_cmpxchg(), it still
dereferences @work for irq_work_is_hard() and rcuwait_wake_up().
An irq_work_sync() caller on another CPU that enters after BUSY is cleared
can observe BUSY==0 immediately, return, and free the work before those
accesses complete — causing a use-after-free.
Fix this by wrapping run_irq_workd() in guard(rcu)() so that the entire
irq_work_single() execution is within an RCU read-side critical
section. Then add synchronize_rcu() in irq_work_sync() after
rcuwait_wait_event() to ensure the caller waits for the RCU grace period
before returning, preventing premature frees.
Fixes: 810979682c ("irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support.")
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260330073234.303732-1-jiayuan.chen@linux.dev
Use the existing zenbook duo keyboard quirk for the UX8407AA model too.
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260508070956.62201-1-p.pisati@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When executing NS_GET_PID_FROM_PIDNS (or similar pidns ioctls), if the
target task cannot be found in the corresponding pid_ns, the error code
should be ESRCH instead of ENOTTY.
This bug was introduced when the extensible ioctl handling was added.
Without proper return, ret would be overwritten by the default case in
the extensible ioctl switch statement.
Fixes: a1d220d9da ("nsfs: iterate through mount namespaces")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://patch.msgid.link/20260507112301.1042757-1-chengzhihao1@huawei.com
Reviewed-by: Yang Erkun <yangerkun@huawei.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
blk_validate_limits() requires max_hw_sectors >= PAGE_SECTORS and fires
a WARN_ON_ONCE if this invariant is violated. ublk_validate_params()
only checked the upper bound of max_sectors against max_io_buf_bytes,
allowing userspace to pass small values (including zero) that trigger
the warning when blk_mq_alloc_disk() is called from
ublk_ctrl_start_dev().
Before 494ea040bc, ublk used blk_queue_max_hw_sectors() which silently
clamped small values up to PAGE_SECTORS. The conversion to passing
queue_limits directly to blk_mq_alloc_disk() lost that clamping and now
hits blk_validate_limits()'s WARN_ON_ONCE instead.
Validate that max_sectors is at least PAGE_SECTORS in
ublk_validate_params() so invalid values are rejected early with
-EINVAL instead of reaching the block layer.
Fixes: 494ea040bc ("ublk: pass queue_limits to blk_mq_alloc_disk")
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260510144843.769031-1-tom.leiming@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
SQPOLL stores current->pid (init_pid_ns view) in sqd->task_pid
at thread creation. fdinfo prints it raw via
seq_printf("SqThread:\t%d\n", sq_pid). A reader inside a
non-initial pid_ns sees the host PID, not the kthread's PID in
the reader's own pid_ns.
The SQPOLL kthread is created with CLONE_THREAD and no
CLONE_NEW*, so it lives in the submitter's pid_ns. An
unprivileged user_ns + pid_ns submitter can read fdinfo and
learn the host PID of a kthread whose in-namespace PID is
different.
Reproducer (mainline 7.0, KASAN): unshare CLONE_NEWUSER |
CLONE_NEWPID | CLONE_NEWNS, mount a private /proc, then have a
grandchild that is pid 1 in the new pid_ns open an io_uring
ring with IORING_SETUP_SQPOLL. /proc/self/task lists {1, 2};
the SQPOLL kthread is pid 2. Before: fdinfo prints
SqThread = <host pid>. After: SqThread = 2.
Use task_pid_nr_ns() against the proc inode's pid_ns to compute
sq_pid, instead of reading the stored sq->task_pid (which holds
the init_pid_ns view). pidfd_show_fdinfo() in kernel/pid.c
follows the same pattern.
Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg>
Link: https://patch.msgid.link/20260510084119.457578-1-maoyi.xie@ntu.edu.sg
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When updating timestamps with lazytime enabled, if only I_DIRTY_TIME is
set (pure lazytime update), inode_maybe_inc_iversion() should not be
forced to increment i_version. The force parameter should only be true
when actual data or metadata changes require an iversion bump.
The current code uses "!!dirty" which evaluates to true whenever dirty
has any bits set, including the I_DIRTY_TIME bit alone. This forces an
iversion increment on every lazytime timestamp update, which then sets
I_DIRTY_SYNC, triggering expensive log flushes on subsequent fdatasync
calls. Andres reported this issue when he noticed a perf regression[1].
Fix this by using "dirty != I_DIRTY_TIME" as the force parameter. This
passes false for pure lazytime updates (allowing the I_VERSION_QUERIED
optimization to work), while still forcing the increment when dirty
contains other flags indicating real changes that require iversion
updates.
[1] https://lore.kernel.org/linux-xfs/7ys6erh3nnyeerv2nybyfvp7dmaknuxrlxv74wx56ocdothkc6@ekfiadtkfn2r/
Fixes: 85c871a02b ("fs: add support for non-blocking timestamp updates")
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://patch.msgid.link/20260511111918.1793689-1-p.raghav@samsung.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Affinity changes of IMSIC interrupts have to be careful to not lose an
interrupt in the process. Each vector keeps track of an affinity change in
progress with two pointers in struct imsic_vector.
imsic_vector::move_prev points to the previous CPU target data and
imsic_vector::move_next to the designated new CPU target data.
imsic_vector::move_prev on the new CPU can only be cleared after the
previous CPU has cleared imsic_vector::move_next, which ususally happens in
__imsic_remote_sync().
In case of CPU hot-unplug __imsic_remote_sync() is not invoked because the
CPU is already marked offline. That means imsic_vector::move_prev becomes
stale until the CPU is onlined again.
The stale pointer prevents further affinity changes for the affected
interrupts.
Solve this by clearing the imsic_vector::move_prev pointers in the CPU
hotplug offline path.
[ tglx: Replace word salad in change log ]
Fixes: 0f67911e82 ("irqchip/riscv-imsic: Separate next and previous pointers in IMSIC vector")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260508-imsic-v2-1-e9f08dd46cf5@sifive.com
meson_s4_gpio_irq_set_type() uses the both-edge trigger register for
configuring level type and single edge mode interrupts, which is not
correct.
Use REG_EDGE_POL instead.
Fixes: bbd6fcc76b ("irqchip: Add support for Amlogic A4 and A5 SoCs")
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260508-a9-gpio-irqchip-v1-1-9dc5f3e022e0@amlogic.com
Recently handle_percpu_devid_irq() was changed to call
add_interrupt_randomness(). This introduced a potential deadlock when
handle_percpu_devid_irq() is used to handle an NMI, which can be
detected with lockdep, e.g.
================================
WARNING: inconsistent lock state
7.1.0-rc2-pnmi #465 Not tainted
--------------------------------
inconsistent {INITIAL USE} -> {IN-NMI} usage.
perf/695 [HC1[1]:SC0[0]:HE0:SE1] takes:
ffff00837dfd3a18 (&base->lock){-.-.}-{2:2}, at: lock_timer_base+0x6c/0xac
{INITIAL USE} state was registered at:
_raw_spin_lock_irqsave+0x68/0xb0
lock_timer_base+0x6c/0xac
__mod_timer+0x100/0x32c
add_timer_global+0x2c/0x40
__queue_delayed_work+0xf0/0x140
queue_delayed_work_on+0x134/0x138
mem_cgroup_css_online+0x30c/0x310
online_css+0x34/0x10c
cgroup_init_subsys+0x158/0x1c8
cgroup_init+0x440/0x524
start_kernel+0x888/0x998
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&base->lock);
<Interrupt>
lock(&base->lock);
*** DEADLOCK ***
Call trace:
_raw_spin_lock_irqsave+0x68/0xb0
lock_timer_base+0x6c/0xac
add_timer_on+0x78/0x16c
add_interrupt_randomness+0x124/0x134
handle_percpu_devid_irq+0xd4/0x16c
handle_irq_desc+0x40/0x58
generic_handle_domain_nmi+0x28/0x50
__gic_handle_nmi.isra.0+0x4c/0xa0
gic_handle_irq+0x38/0x2bc
call_on_irq_stack+0x30/0x48
do_interrupt_handler+0x80/0x98
el1_interrupt+0x90/0xac
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x80/0x84
[...]
During review, Thomas pointed out it wouldn't be safe for
handle_percpu_devid_irq() to call add_interrupt_randomness() if it was
used to handle NMIs:
https://lore.kernel.org/lkml/87bjgik042.ffs@tglx/
... but evidently people missed that handle_percpu_devid_irq() *is* used
for NMIs.
While it might seem that NMIs should be handled with a separate
handle_percpu_devid_nmi() function, for various structural reasons this was
impractical, and handle_percpu_devid_irq() has been expected to be used for
NMIs since commits:
21bbbc50f3 ("irqchip/gic-v3: Switch high priority PPIs over to handle_percpu_devid_irq()")
5ff78c8de9 ("genirq: Kill handle_percpu_devid_fasteoi_nmi()")
Taking the above into account, avoid the deadlock by not calling
add_interrupt_randomness() when handle_percpu_devid_irq() is called in an
NMI context. This is consistent with other NNI handling flows, which do not
call add_interrupt_randomness().
At the same time, update the kernel-doc comment to make it clear that
handle_percpu_devid_irq() can be called in NMI context. The rest of
handle_percpu_devid_irq() is currently NMI safe and doesn't need to change.
Fixes: fd7400cfcb ("genirq/chip: Invoke add_interrupt_randomness() in handle_percpu_devid_irq()")
Reported-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://patch.msgid.link/20260507110518.3128248-1-mark.rutland@arm.com
The ITS MSI domain no longer manages LPI allocation directly. LPIs are
allocated and freed by the parent LPI domain, which can now handle a
full range of interrupts and unwind partial allocations internally.
Make the ITS domain request and release the parent IRQs as a single
range instead of iterating over each interrupt. The ITS allocation
path then only needs to reserve EventIDs, allocate the parent range,
and fill in the ITS irq_data for each MSI. Since no operation in the
per-MSI loop can fail, the partial parent-free unwind becomes
unnecessary.
On teardown, reset the ITS irq_data for the range and then release the
parent range in one call, leaving LPI teardown to the LPI domain.
Fixes: 0f01013258 ("irqchip/gic-v5: Add GICv5 LPI/IPI support")
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260506093634.382062-4-sascha.bischoff@arm.com
The per-IPI parent allocation loop returns immediately on failure and leaks
any parent interrupts allocated by earlier iterations.
The GICv5 LPI domain now owns LPI allocation and teardown internally,
but its irq_domain callbacks still reject requests where nr_irqs is
greater than one. This forces child domains to allocate and free LPIs
one at a time even when the interrupt core requests a contiguous
range.
Handle multi-interrupt allocation and teardown in the LPI domain by
iterating over the requested range and unwinding any partially
allocated state on failure.
Allocate the parent LPIs for the IPI domain with a single range
request as well, which cures the leakage problem.
Fixes: 0f01013258 ("irqchip/gic-v5: Add GICv5 LPI/IPI support")
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260506093634.382062-3-sascha.bischoff@arm.com
The IPI and ITS MSI domains currently allocate and release LPIs
directly, then pass the selected LPI ID to the parent LPI domain. This
leaks the LPI domain's allocation policy into its child domains and
forces each child to duplicate part of the parent domain's teardown.
Make the LPI domain allocate LPIs in its .alloc() callback and release
them in a matching .free() callback. Child domains can then request a
parent interrupt without passing an implementation-specific LPI ID,
and the LPI lifetime is tied to the domain that owns the LPI
namespace.
Remove the gicv5_alloc_lpi() and gicv5_free_lpi() wrappers now that no
external caller needs to manage LPIs directly.
This is a preparatory change for an actual leakage problem in the
allocation code and therefore tagged with the same Fixes tag.
Fixes: 0f01013258 ("irqchip/gic-v5: Add GICv5 LPI/IPI support")
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260506093634.382062-2-sascha.bischoff@arm.com
fuse_iomap_writeback_range() appends one folio pointer and one
fuse_folio_desc for every dirty range that is merged into the current
writeback request. The merge decision checks the byte budget against
fc->max_pages and fc->max_write, but it does not check whether the folio
and descriptor arrays still have another free slot.
This is not sufficient for fuseblk, where the filesystem block size can
be smaller than PAGE_SIZE. With writeback cache enabled and max_pages
negotiated as one, contiguous sub-page dirty ranges can fit within the
byte budget while spanning more than one folio. The next append can then
write past the one-slot folios and descs arrays.
Split the request when the number of already attached folios has reached
fc->max_pages. This keeps the folio/descriptor slot accounting in sync
with the send decision.
Fixes: ef7e7cbb32 ("fuse: use iomap for writeback")
Cc: stable@vger.kernel.org
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Junxi Qian <qjx1298677004@gmail.com>
Link: https://patch.msgid.link/20260506122415.205340-1-qjx1298677004@gmail.com
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Return NULL instead of passing to ERR_PTR while err is zero
Fixes these smatch warnings:
- fs/jfs/namei.c:311 jfs_mkdir() warn: passing zero to 'ERR_PTR'
- fs/orangefs/namei.c:369 orangefs_mkdir() warn: passing zero
to 'ERR_PTR'
Fixes: 88d5baf690 ("Change inode_operations.mkdir to return struct dentry *")
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Link: https://patch.msgid.link/20260501071058.1243245-1-zenghongling@kylinos.cn
Reviewed-by: Jori Koolstra <jkoolstra@xs4all.nl>
Signed-off-by: Christian Brauner <brauner@kernel.org>
statmount_mnt_idmap() writes one mapping with seq_printf() and then
manually advances seq->count to include the NUL separator.
If seq_printf() overflows, seq_set_overflow() sets seq->count to
seq->size. The manual seq->count++ changes this to seq->size + 1.
seq_has_overflowed() then no longer detects the overflow. The corrupted
count returns to statmount_string(), which later executes:
seq->buf[seq->count++] = '\0';
This causes a 1-byte NULL out-of-bounds write on the dynamically
allocated seq buffer.
Fix this by checking for overflow immediately after seq_printf().
Fixes: 37c4a9590e ("statmount: allow to retrieve idmappings")
Signed-off-by: Junyoung Jang <graypanda.inzag@gmail.com>
Link: https://patch.msgid.link/20260504112649.1862936-1-graypanda.inzag@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Adds lwmi_is_attr_01_supported, and only creates the attribute subfolder
if the attribute is supported by the hardware. Due to some poorly
implemented BIOS this is a multi-step sequence of events. This is
because:
- Some BIOS support getting the capability data from custom mode (0xff),
while others only support it in no-mode (0x00).
- Some BIOS support get/set for the current value from custom mode (0xff),
while others only support it in no-mode (0x00).
- Some BIOS report capability data for a method that is not fully
implemented.
- Some BIOS have methods fully implemented, but no complimentary
capability data.
To ensure we only expose fully implemented methods with corresponding
capability data, we check each outcome before reporting that an
attribute can be supported.
Checking for lwmi_is_attr_01_supported during remove is not done to
ensure that we don't attempt to call cd01 or send WMI events if one of
the interfaces being removed was the cause of the driver unloading.
Fixes: edc4b183b7 ("platform/x86: Add Lenovo Other Mode WMI Driver")
Reported-by: Kurt Borja <kuurtb@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/DG60P3SHXR8H.3NSEHMZ6J7XRC@gmail.com/
Cc: stable@vger.kernel.org
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-10-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Adds lwmi_attr_id() function. In the same vein as LWMI_ATTR_ID_FAN_RPM(),
but as a generic, to de-duplicate attribute_id assignment boilerplate.
Adds tunable_attr_01_id() function that breaks out the members of a
tunable_attr_01 struct and passes them to lwmi_attr_id().
No functional change intended.
Cc: stable@vger.kernel.org
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-9-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In a later patch in the series the thermal mode enum will be accessed
across three separate drivers (wmi-capdata, wmi-gamezonem and wmi-other).
An additional patch in the series will also add a function prototype that
needs to reference this enum in wmi-helpers.h. To avoid having all these
drivers begin to import each others headers, and to avoid declaring an
opaque enum to hande the second case, move the thermal mode enum to
helpers where it can be safely accessed by everything that needs it from
a single import.
While at it, since the gamezone_events_type enum is the only remaining
item in the header, move that as well and remove the gamezone header
entirely.
Cc: stable@vger.kernel.org
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-8-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently, lenovo-wmi-gamezone depends on lenovo-wmi-other as the former
imports symbols from the latter. The imported symbols are just used to
register a notifier block. However, there is no runtime dependency
between both drivers, and either of them can run without the other,
which is the major purpose of using the notifier framework.
Such a link-time dependency is non-optimal. A previous attempt to "fix"
it made LENOVO_WMI_GAMEZONE select LENOVO_WMI_TUNING, which was
fundamentally broken and resulted in undefined Kconfig behavior, as
`select' cannot be used on a symbol with potentially unmet dependencies.
Decouple both drivers by moving the thermal mode notifier chain to
lenovo-wmi-helpers. Methods for notifier block (un)registration are
exported for lenovo-wmi-gamezone, while a method for querying the
current thermal mode are exported for lenovo-wmi-other.
This turns the dependency graph from
+------------ lenovo-wmi-gamezone
| |
v |
lenovo-wmi-helpers |
^ |
| V
+------------ lenovo-wmi-other
into
+------------ lenovo-wmi-gamezone
|
v
lenovo-wmi-helpers
^
|
+------------ lenovo-wmi-other
To make it clear, the name of the notifier chain is also renamed from
`om_chain_head' to `tm_chain_head', indicating that it's used to query
the current thermal mode.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: 6e38b9fcbf ("platform/x86: lenovo: gamezone needs "other mode"")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603252259.gHvJDyh3-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202603260302.X0NjQOda-lkp@intel.com/
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-7-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In struct tunable_attr_01 the capdata pointer is unused and the size of
the id members is u32 when it should be u8. Fix these prior to adding
additional members.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Cc: stable@vger.kernel.org
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-6-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Adds explicit initialization of wmi_method_args_32 declarations with
zero values to prevent uninitialized data from being sent to the device
BIOS when passed.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: 22024ac536 ("platform/x86: Add Lenovo Gamezone WMI Driver")
Fixes: edc4b183b7 ("platform/x86: Add Lenovo Other Mode WMI Driver")
Reported-by: Rong Zhang <i@rong.moe>
Closes: https://lore.kernel.org/platform-driver-x86/95c7e7b539dd0af41189c754fcd35cec5b6fe182.camel@rong.moe/
Cc: stable@vger.kernel.org
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-5-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When lwmi_om_master_bind() fails, the master device's components are
left bound, with the aggregate device destroyed due to the failure
(found by sashiko.dev [1]).
Balance calls to component_bind_all() and component_unbind_all() when an
error is propagated to the component framework.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fixes: edc4b183b7 ("platform/x86: Add Lenovo Other Mode WMI Driver")
Cc: stable@vger.kernel.org
Link: https://sashiko.dev/#/patchset/20260331181208.421552-1-derekjohn.clark%40gmail.com [1]
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-4-derekjohn.clark@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently, the IDA id is only freed on wmi-other device removal or
failure to create firmware-attributes device, kset, or attributes. It
leaks IDA ids if the wmi-other device is bound multiple times, as the
unbind callback never frees the previously allocated IDA id.
Additionally, if the wmi-other device has failed to create a
firmware-attributes device before it gets removed, the wmi-device
removal callback double frees the same IDA id.
These bugs were found by sashiko.dev [1].
Fix them by moving ida_free() into lwmi_om_fw_attr_remove() so it is
balanced with ida_alloc() in lwmi_om_fw_attr_add(). With them fixed,
properly set and utilize the validity of priv->ida_id to balance
firmware-attributes registration and removal, without relying on
propagating the registration error to the component framework, which is
more reliable and aligns with the hwmon device registration and removal
sequences.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: edc4b183b7 ("platform/x86: Add Lenovo Other Mode WMI Driver")
Cc: stable@vger.kernel.org
Link: https://sashiko.dev/#/patchset/20260331181208.421552-1-derekjohn.clark%40gmail.com [1]
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-3-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
lwmi_dev_evaluate_int() leaks output.pointer when retval == NULL (found
by sashiko.dev [1]).
Fix it by moving `ret_obj = output.pointer' outside of the `if (retval)'
block so that it is always freed by the __free cleanup callback.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: e521d16e76 ("platform/x86: Add lenovo-wmi-helpers")
Cc: stable@vger.kernel.org
Link: https://sashiko.dev/#/patchset/20260331181208.421552-1-derekjohn.clark%40gmail.com [1]
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-2-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fix spelling mistake in comment:
- occured -> occurred
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Md Shofiqul Islam <shofiqtest@gmail.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The xfs logging macros include a newline, remove the \n, which adds an
extra one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Andrey Albershteyn <aalbersh@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Commit 4346ba1604 ("fprobe: Rewrite fprobe on function-graph tracer")
changed fprobe to register struct fprobe to an rcu-hlist, but it forgot
to wait for RCU GP. Thus there can be use-after-free if the fprobe is
released right after unregistering. This can be happened on fprobe
event and sample module code.
To fix this issue, add synchronize_rcu() in unregister_fprobe().
Note that BPF is OK because fprobe is used as a part of
bpf_kprobe_multi_link. This unregisters its fprobe in
bpf_kprobe_multi_link_release() and it is deallocated via
bpf_kprobe_multi_link_dealloc(), which is invoked from
bpf_link_defer_dealloc_rcu_gp() RCU callback.
For BPF, this also introduced unregister_fprobe_async() which does
NOT wait for RCU grace priod.
Link: https://lore.kernel.org/all/177813998919.256460.2809243930741138224.stgit@mhiramat.tok.corp.google.com/
Fixes: 4346ba1604 ("fprobe: Rewrite fprobe on function-graph tracer")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
scx_alloc_and_add_sched() can fail after @sch has been assigned to
ops->priv. In those cases @sch is torn down (either via kfree() through
the err_free_* chain or via kobject_put() -> scx_kobj_release() -> RCU
work), but @ops->priv is left pointing at the about-to-be-freed pointer.
With the recent -EBUSY gate in scx_root_enable_workfn() and
scx_sub_enable_workfn() that rejects an attach when @ops->priv is still
non-NULL, see commit bbf30b383c ("sched_ext: Fix ops->priv clobber on
concurrent attach/detach"), a dangling @ops->priv permanently locks the
kdata out: every future attach attempt sees a stale binding and returns
-EBUSY even though no scheduler is actually attached.
Clear @ops->priv on the post-assign failure paths so that the kdata
returns to its pre-attach state when the function returns ERR_PTR().
Fixes: bbf30b383c ("sched_ext: Fix ops->priv clobber on concurrent attach/detach")
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The batch holds references to the folios (see `filemap_get_folios`,
`folio_batch_release`), so we need to `folio_put` the folios we remove.
Tested on v6.18.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/74156
Signed-off-by: Hristo Venev <hristo@venev.name>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When MDS rejects a session, remove_session_caps() ->
__ceph_remove_cap() -> ceph_change_snap_realm() clears
i_snap_realm for every inode that loses its last cap.
The realm is restored once caps are re-granted after
reconnect. It is not a real error and this patch changes
pr_err_ratelimited_client() on doutc().
Every quota methods ceph_quota_is_max_files_exceeded(),
ceph_quota_is_max_bytes_exceeded(),
ceph_quota_is_max_bytes_approaching() calls
ceph_has_realms_with_quotas() check. This patch adds
the missing ceph_has_realms_with_quotas() call into
ceph_quota_update_statfs().
[ idryomov: add braces around both arms of multiline ifs ]
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In __ceph_x_decrypt(), a part of the buffer p is interpreted as a
ceph_x_encrypt_header, and the magic field of this struct is accessed.
This happens without any guarantee that the buffer is large enough to
hold this struct. The function parameter ciphertext_len represents the
length of the ciphertext to decrypt and is guaranteed to be at most the
remaining size of the allocated buffer p. However, this value is not
necessarily greater than sizeof(ceph_x_encrypt_header). E.g., a message
frame of type FRAME_TAG_AUTH_REPLY_MORE, that is just as long to hold
the ciphertext at its end with a ciphertext_len of 8 or less, can
trigger an out-of-bounds memory access when accessing hdr->magic.
This patch fixes the issue by adding a check to ensure that the
decrypted plaintext in the buffer is large enough to represent at least
the ceph_x_encrypt_header.
Cc: stable@vger.kernel.org
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The old_blob in __ceph_setxattr() can store
ci->i_xattrs.prealloc_blob value during the retry.
However, it is never called the ceph_buffer_put()
for the old_blob object. This patch fixes the issue of
the buffer leak.
Cc: stable@vger.kernel.org
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In crush_decode_uniform_bucket(), the item_weight field of the bucket
is set. This is a single field of type u32 since the uniform bucket uses
the same weight for all items. The value in ceph_decode_need() is set to
(1+b->h.size) * sizeof(u32), which is higher than actually needed.
This patch removes the call to ceph_decode_need() with the unnecessarily
high value and switches the subsequent operation from ceph_decode_32()
to ceph_decode_32_safe(), which already includes the correct bounds
check.
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
