mirror of
https://github.com/torvalds/linux.git
synced 2026-06-17 03:23:45 +02:00
6fe810bda0
46312 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
7f39add3b0 |
block: Refuse request/bio merges with gaps in the integrity payload
If a driver sets the block queue virtual boundary mask, it means that it cannot handle gaps so we must not allow those in the integrity payload as well. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Fixed up by me to have duplicate integrity merge functions, depending on whether block integrity is enabled or not. Fixes a compilations issue with CONFIG_BLK_DEV_INTEGRITY unset. Signed-off-by: Jens Axboe <axboe@fb.com> |
||
|
|
5e7c4274a7 |
block: Check for gaps on front and back merges
We are checking for gaps to previous bio_vec, which can only detect back merges gaps. Moreover, at the point where we check for a gap, we don't know if we will attempt a back or a front merge. Thus, check for gap to prev in a back merge attempt and check for a gap to next in a front merge attempt. Signed-off-by: Jens Axboe <axboe@fb.com> [sagig: Minor rename change] Signed-off-by: Sagi Grimberg <sagig@mellanox.com> |
||
|
|
d975f309a8 |
Merge branch 'for-4.3/sg' of git://git.kernel.dk/linux-block
Pull SG updates from Jens Axboe:
"This contains a set of scatter-gather related changes/fixes for 4.3:
- Add support for limited chaining of sg tables even for
architectures that do not set ARCH_HAS_SG_CHAIN. From Christoph.
- Add sg chain support to target_rd. From Christoph.
- Fixup open coded sg->page_link in crypto/omap-sham. From
Christoph.
- Fixup open coded crypto ->page_link manipulation. From Dan.
- Also from Dan, automated fixup of manual sg_unmark_end()
manipulations.
- Also from Dan, automated fixup of open coded sg_phys()
implementations.
- From Robert Jarzmik, addition of an sg table splitting helper that
drivers can use"
* 'for-4.3/sg' of git://git.kernel.dk/linux-block:
lib: scatterlist: add sg splitting function
scatterlist: use sg_phys()
crypto/omap-sham: remove an open coded access to ->page_link
scatterlist: remove open coded sg_unmark_end instances
crypto: replace scatterwalk_sg_chain with sg_chain
target/rd: always chain S/G list
scatterlist: allow limited chaining without ARCH_HAS_SG_CHAIN
|
||
|
|
52b084d31c |
Merge branch 'for-4.3/drivers' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"On top of the 4.3 core block IO changes, here are the driver related
changes for 4.3. Basically just NVMe and nbd this time around:
- NVMe:
- PRACT PI improvement from Alok Pandey.
- Cleanups and improvements on submission queue doorbell and
writing, using CMB if available. From Jon Derrick.
- From Keith, support for setting queue maximum segments, and
reset support.
- Also from Jon, fixup of u64 division issue on 32-bit archs and
wiring up of the reset support through and ioctl.
- Two small cleanups from Matias and Sunad
- Various code cleanups and fixes from Markus Pargmann"
* 'for-4.3/drivers' of git://git.kernel.dk/linux-block:
NVMe: Using PRACT bit to generate and verify PI by controller
NVMe:Remove unreachable code in nvme_abort_req
NVMe: Add nvme subsystem reset IOCTL
NVMe: Add nvme subsystem reset support
NVMe: removed unused nn var from nvme_dev_add
NVMe: Set queue max segments
nbd: flags is a u32 variable
nbd: Rename functions for clearness of recv/send path
nbd: Change 'disconnect' to be boolean
nbd: Add debugfs entries
nbd: Remove variable 'pid'
nbd: Move clear queue debug message
nbd: Remove 'harderror' and propagate error properly
nbd: restructure sock_shutdown
nbd: sock_shutdown, remove conditional lock
nbd: Fix timeout detection
nvme: Fixes u64 division which breaks i386 builds
NVMe: Use CMB for the IO SQes if available
NVMe: Unify SQ entry writing and doorbell ringing
|
||
|
|
1081230b74 |
Merge branch 'for-4.3/core' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
"This first core part of the block IO changes contains:
- Cleanup of the bio IO error signaling from Christoph. We used to
rely on the uptodate bit and passing around of an error, now we
store the error in the bio itself.
- Improvement of the above from myself, by shrinking the bio size
down again to fit in two cachelines on x86-64.
- Revert of the max_hw_sectors cap removal from a revision again,
from Jeff Moyer. This caused performance regressions in various
tests. Reinstate the limit, bump it to a more reasonable size
instead.
- Make /sys/block/<dev>/queue/discard_max_bytes writeable, by me.
Most devices have huge trim limits, which can cause nasty latencies
when deleting files. Enable the admin to configure the size down.
We will look into having a more sane default instead of UINT_MAX
sectors.
- Improvement of the SGP gaps logic from Keith Busch.
- Enable the block core to handle arbitrarily sized bios, which
enables a nice simplification of bio_add_page() (which is an IO hot
path). From Kent.
- Improvements to the partition io stats accounting, making it
faster. From Ming Lei.
- Also from Ming Lei, a basic fixup for overflow of the sysfs pending
file in blk-mq, as well as a fix for a blk-mq timeout race
condition.
- Ming Lin has been carrying Kents above mentioned patches forward
for a while, and testing them. Ming also did a few fixes around
that.
- Sasha Levin found and fixed a use-after-free problem introduced by
the bio->bi_error changes from Christoph.
- Small blk cgroup cleanup from Viresh Kumar"
* 'for-4.3/core' of git://git.kernel.dk/linux-block: (26 commits)
blk: Fix bio_io_vec index when checking bvec gaps
block: Replace SG_GAPS with new queue limits mask
block: bump BLK_DEF_MAX_SECTORS to 2560
Revert "block: remove artifical max_hw_sectors cap"
blk-mq: fix race between timeout and freeing request
blk-mq: fix buffer overflow when reading sysfs file of 'pending'
Documentation: update notes in biovecs about arbitrarily sized bios
block: remove bio_get_nr_vecs()
fs: use helper bio_add_page() instead of open coding on bi_io_vec
block: kill merge_bvec_fn() completely
md/raid5: get rid of bio_fits_rdev()
md/raid5: split bio for chunk_aligned_read
block: remove split code in blkdev_issue_{discard,write_same}
btrfs: remove bio splitting and merge_bvec_fn() calls
bcache: remove driver private bio splitting code
block: simplify bio_add_page()
block: make generic_make_request handle arbitrarily sized bios
blk-cgroup: Drop unlikely before IS_ERR(_OR_NULL)
block: don't access bio->bi_error after bio_put()
block: shrink struct bio down to 2 cache lines again
...
|
||
|
|
8bdc69b764 |
Merge branch 'for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo: - a new PIDs controller is added. It turns out that PIDs are actually an independent resource from kmem due to the limited PID space. - more core preparations for the v2 interface. Once cpu side interface is settled, it should be ready for lifting the devel mask. for-4.3-unified-base was temporarily branched so that other trees (block) can pull cgroup core changes that blkcg changes depend on. - a non-critical idr_preload usage bug fix. * 'for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: pids: fix invalid get/put usage cgroup: introduce cgroup_subsys->legacy_name cgroup: don't print subsystems for the default hierarchy cgroup: make cftype->private a unsigned long cgroup: export cgrp_dfl_root cgroup: define controller file conventions cgroup: fix idr_preload usage cgroup: add documentation for the PIDs controller cgroup: implement the PIDs subsystem cgroup: allow a cgroup subsystem to reject a fork |
||
|
|
76ec51ef5e |
Merge branch 'for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu updates from Tejun Heo: "Minor cleanups" * 'for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: clean up of schunk->map[] assignment in pcpu_setup_first_chunk percpu: update incorrect comment for this_cpu_*() operations |
||
|
|
7d3e2eb178 |
Merge branch 'for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue updates from Tejun Heo: "Only three trivial changes for workqueue this time - doc, MAINTAINERS and EXPORT_SYMBOL updates" * 'for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: fix some docbook warnings workqueue: Make flush_workqueue() available again to non GPL modules workqueue: add myself as a dedicated reviwer |
||
|
|
ae98207309 |
Power management and ACPI material for v4.3-rc1
- ACPICA update to upstream revision 20150818 including method
tracing extensions to allow more in-depth AML debugging in the
kernel and a number of assorted fixes and cleanups (Bob Moore,
Lv Zheng, Markus Elfring).
- ACPI sysfs code updates and a documentation update related to
AML method tracing (Lv Zheng).
- ACPI EC driver fix related to serialized evaluations of _Qxx
methods and ACPI tools updates allowing the EC userspace tool
to be built from the kernel source (Lv Zheng).
- ACPI processor driver updates preparing it for future
introduction of CPPC support and ACPI PCC mailbox driver
updates (Ashwin Chaugule).
- ACPI interrupts enumeration fix for a regression related
to the handling of IRQ attribute conflicts between MADT
and the ACPI namespace (Jiang Liu).
- Fixes related to ACPI device PM (Mika Westerberg, Srinidhi Kasagar).
- ACPI device registration code reorganization to separate the
sysfs-related code and bus type operations from the rest (Rafael
J Wysocki).
- Assorted cleanups in the ACPI core (Jarkko Nikula, Mathias Krause,
Andy Shevchenko, Rafael J Wysocki, Nicolas Iooss).
- ACPI cpufreq driver and ia64 cpufreq driver fixes and cleanups
(Pan Xinhui, Rafael J Wysocki).
- cpufreq core cleanups on top of the previous changes allowing it
to preseve its sysfs directories over system suspend/resume (Viresh
Kumar, Rafael J Wysocki, Sebastian Andrzej Siewior).
- cpufreq fixes and cleanups related to governors (Viresh Kumar).
- cpufreq updates (core and the cpufreq-dt driver) related to the
turbo/boost mode support (Viresh Kumar, Bartlomiej Zolnierkiewicz).
- New DT bindings for Operating Performance Points (OPP), support
for them in the OPP framework and in the cpufreq-dt driver plus
related OPP framework fixes and cleanups (Viresh Kumar).
- cpufreq powernv driver updates (Shilpasri G Bhat).
- New cpufreq driver for Mediatek MT8173 (Pi-Cheng Chen).
- Assorted cpufreq driver (speedstep-lib, sfi, integrator) cleanups
and fixes (Abhilash Jindal, Andrzej Hajda, Cristian Ardelean).
- intel_pstate driver updates including Skylake-S support, support
for enabling HW P-states per CPU and an additional vendor bypass
list entry (Kristen Carlson Accardi, Chen Yu, Ethan Zhao).
- cpuidle core fixes related to the handling of coupled idle states
(Xunlei Pang).
- intel_idle driver updates including Skylake Client support and
support for freeze-mode-specific idle states (Len Brown).
- Driver core updates related to power management (Andy Shevchenko,
Rafael J Wysocki).
- Generic power domains framework fixes and cleanups (Jon Hunter,
Geert Uytterhoeven, Rajendra Nayak, Ulf Hansson).
- Device PM QoS framework update to allow the latency tolerance
setting to be exposed to user space via sysfs (Mika Westerberg).
- devfreq support for PPMUv2 in Exynos5433 and a fix for an incorrect
exynos-ppmu DT binding (Chanwoo Choi, Javier Martinez Canillas).
- System sleep support updates (Alan Stern, Len Brown, SungEun Kim).
- rockchip-io AVS support updates (Heiko Stuebner).
- PM core clocks support fixup (Colin Ian King).
- Power capping RAPL driver update including support for Skylake H/S
and Broadwell-H (Radivoje Jovanovic, Seiichi Ikarashi).
- Generic device properties framework fixes related to the handling
of static (driver-provided) property sets (Andy Shevchenko).
- turbostat and cpupower updates (Len Brown, Shilpasri G Bhat,
Shreyas B Prabhu).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=fTgI
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael Wysocki:
"From the number of commits perspective, the biggest items are ACPICA
and cpufreq changes with the latter taking the lead (over 50 commits).
On the cpufreq front, there are many cleanups and minor fixes in the
core and governors, driver updates etc. We also have a new cpufreq
driver for Mediatek MT8173 chips.
ACPICA mostly updates its debug infrastructure and adds a number of
fixes and cleanups for a good measure.
The Operating Performance Points (OPP) framework is updated with new
DT bindings and support for them among other things.
We have a few updates of the generic power domains framework and a
reorganization of the ACPI device enumeration code and bus type
operations.
And a lot of fixes and cleanups all over.
Included is one branch from the MFD tree as it contains some
PM-related driver core and ACPI PM changes a few other commits are
based on.
Specifics:
- ACPICA update to upstream revision 20150818 including method
tracing extensions to allow more in-depth AML debugging in the
kernel and a number of assorted fixes and cleanups (Bob Moore, Lv
Zheng, Markus Elfring).
- ACPI sysfs code updates and a documentation update related to AML
method tracing (Lv Zheng).
- ACPI EC driver fix related to serialized evaluations of _Qxx
methods and ACPI tools updates allowing the EC userspace tool to be
built from the kernel source (Lv Zheng).
- ACPI processor driver updates preparing it for future introduction
of CPPC support and ACPI PCC mailbox driver updates (Ashwin
Chaugule).
- ACPI interrupts enumeration fix for a regression related to the
handling of IRQ attribute conflicts between MADT and the ACPI
namespace (Jiang Liu).
- Fixes related to ACPI device PM (Mika Westerberg, Srinidhi
Kasagar).
- ACPI device registration code reorganization to separate the
sysfs-related code and bus type operations from the rest (Rafael J
Wysocki).
- Assorted cleanups in the ACPI core (Jarkko Nikula, Mathias Krause,
Andy Shevchenko, Rafael J Wysocki, Nicolas Iooss).
- ACPI cpufreq driver and ia64 cpufreq driver fixes and cleanups (Pan
Xinhui, Rafael J Wysocki).
- cpufreq core cleanups on top of the previous changes allowing it to
preseve its sysfs directories over system suspend/resume (Viresh
Kumar, Rafael J Wysocki, Sebastian Andrzej Siewior).
- cpufreq fixes and cleanups related to governors (Viresh Kumar).
- cpufreq updates (core and the cpufreq-dt driver) related to the
turbo/boost mode support (Viresh Kumar, Bartlomiej Zolnierkiewicz).
- New DT bindings for Operating Performance Points (OPP), support for
them in the OPP framework and in the cpufreq-dt driver plus related
OPP framework fixes and cleanups (Viresh Kumar).
- cpufreq powernv driver updates (Shilpasri G Bhat).
- New cpufreq driver for Mediatek MT8173 (Pi-Cheng Chen).
- Assorted cpufreq driver (speedstep-lib, sfi, integrator) cleanups
and fixes (Abhilash Jindal, Andrzej Hajda, Cristian Ardelean).
- intel_pstate driver updates including Skylake-S support, support
for enabling HW P-states per CPU and an additional vendor bypass
list entry (Kristen Carlson Accardi, Chen Yu, Ethan Zhao).
- cpuidle core fixes related to the handling of coupled idle states
(Xunlei Pang).
- intel_idle driver updates including Skylake Client support and
support for freeze-mode-specific idle states (Len Brown).
- Driver core updates related to power management (Andy Shevchenko,
Rafael J Wysocki).
- Generic power domains framework fixes and cleanups (Jon Hunter,
Geert Uytterhoeven, Rajendra Nayak, Ulf Hansson).
- Device PM QoS framework update to allow the latency tolerance
setting to be exposed to user space via sysfs (Mika Westerberg).
- devfreq support for PPMUv2 in Exynos5433 and a fix for an incorrect
exynos-ppmu DT binding (Chanwoo Choi, Javier Martinez Canillas).
- System sleep support updates (Alan Stern, Len Brown, SungEun Kim).
- rockchip-io AVS support updates (Heiko Stuebner).
- PM core clocks support fixup (Colin Ian King).
- Power capping RAPL driver update including support for Skylake H/S
and Broadwell-H (Radivoje Jovanovic, Seiichi Ikarashi).
- Generic device properties framework fixes related to the handling
of static (driver-provided) property sets (Andy Shevchenko).
- turbostat and cpupower updates (Len Brown, Shilpasri G Bhat,
Shreyas B Prabhu)"
* tag 'pm+acpi-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (180 commits)
cpufreq: speedstep-lib: Use monotonic clock
cpufreq: powernv: Increase the verbosity of OCC console messages
cpufreq: sfi: use kmemdup rather than duplicating its implementation
cpufreq: drop !cpufreq_driver check from cpufreq_parse_governor()
cpufreq: rename cpufreq_real_policy as cpufreq_user_policy
cpufreq: remove redundant 'policy' field from user_policy
cpufreq: remove redundant 'governor' field from user_policy
cpufreq: update user_policy.* on success
cpufreq: use memcpy() to copy policy
cpufreq: remove redundant CPUFREQ_INCOMPATIBLE notifier event
cpufreq: mediatek: Add MT8173 cpufreq driver
dt-bindings: mediatek: Add MT8173 CPU DVFS clock bindings
PM / Domains: Fix typo in description of genpd_dev_pm_detach()
PM / Domains: Remove unusable governor dummies
PM / Domains: Make pm_genpd_init() available to modules
PM / domains: Align column headers and data in pm_genpd_summary output
powercap / RAPL: disable the 2nd power limit properly
tools: cpupower: Fix error when running cpupower monitor
PM / OPP: Drop unlikely before IS_ERR(_OR_NULL)
PM / OPP: Fix static checker warning (broken 64bit big endian systems)
...
|
||
|
|
f1a3c0b933 |
DeviceTree updates for 4.3:
- Adding Frank Rowand as DT maintainer in preparation for Grant's retirement. - Generic MSI binding documentation and a few other minor doc updates - Fix long standing issue with DT platorm device unregistration - Fix loop forever bug in of_find_matching_node_by_address() -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJV5hAQAAoJEMhvYp4jgsXiguMIAJippY6yiqatAQr2TcWktkUx KiN209DxPCoAFz9EeCyJ+ck0BV6xKSQf1x/ef93kynYXlQ2uWOWXW6guH8rQ5XFN 15aovQnd03PVcpzsMOSVi/ZxtyGJflxO+RBrcrJ0Vy2HaAYsMmfCiYdLAnhMmJnz Wr4W1LfYLTxchNIS1LlBUKRAeZyOx47yRVEXfNqfjbCu+bJgXDtMj7NNH3muXqVf WZIJu0XFb6UIgMPB/jDdC0Ln6FGe01HIDKQ/EpGgBm/flfSsywVH6eB06R7+EHym T6ap5pRQHXB+oxRU8bGo88Z7xEbcBhKckRT/zvs/vPuG/DfWluIVxbJpR4htJ84= =zTPm -----END PGP SIGNATURE----- Merge tag 'devicetree-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - added Frank Rowand as DT maintainer in preparation for Grant's retirement. - generic MSI binding documentation and a few other minor doc updates - fix long standing issue with DT platorm device unregistration - fix loop forever bug in of_find_matching_node_by_address() * tag 'devicetree-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: MAINTAINERS: Add Frank Rowand as DT maintainer mtd: nand: pxa3xx: add optional dma for pxa architecture Documentation: DT: cpsw: document missing compatible Docs: dt: add generic MSI bindings drivercore: Fix unregistration path of platform devices of/address: Don't loop forever in of_find_matching_node_by_address(). of: Add vendor prefix for JEDEC Solid State Technology Association of/platform: add function to populate default bus of: Add vendor prefix for Sharp Corporation |
||
|
|
089b669506 |
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina: "The usual stuff from trivial tree for 4.3 (kerneldoc updates, printk() fixes, Documentation and MAINTAINERS updates)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits) MAINTAINERS: update my e-mail address mod_devicetable: add space before */ scsi: a100u2w: trivial typo in printk i2c: Fix typo in i2c-bfin-twi.c treewide: fix typos in comment blocks Doc: fix trivial typo in SubmittingPatches proportions: Spelling s/consitent/consistent/ dm: Spelling s/consitent/consistent/ aic7xxx: Fix typo in error message pcmcia: Fix typo in locking documentation scsi/arcmsr: Fix typos in error log drm/nouveau/gr: Fix typo in nv10.c [SCSI] Fix printk typos in drivers/scsi staging: comedi: Grammar s/Enable support a/Enable support for a/ Btrfs: Spelling s/consitent/consistent/ README: GTK+ is a acronym ASoC: omap: Fix typo in config option description mm: tlb.c: Fix error message ntfs: super.c: Fix error log fix typo in Documentation/SubmittingPatches ... |
||
|
|
73b6fa8e49 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace updates from Eric Biederman: "This finishes up the changes to ensure proc and sysfs do not start implementing executable files, as the there are application today that are only secure because such files do not exist. It akso fixes a long standing misfeature of /proc/<pid>/mountinfo that did not show the proper source for files bind mounted from /proc/<pid>/ns/*. It also straightens out the handling of clone flags related to user namespaces, fixing an unnecessary failure of unshare(CLONE_NEWUSER) when files such as /proc/<pid>/environ are read while <pid> is calling unshare. This winds up fixing a minor bug in unshare flag handling that dates back to the first version of unshare in the kernel. Finally, this fixes a minor regression caused by the introduction of sysfs_create_mount_point, which broke someone's in house application, by restoring the size of /sys/fs/cgroup to 0 bytes. Apparently that application uses the directory size to determine if a tmpfs is mounted on /sys/fs/cgroup. The bind mount escape fixes are present in Al Viros for-next branch. and I expect them to come from there. The bind mount escape is the last of the user namespace related security bugs that I am aware of" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: fs: Set the size of empty dirs to 0. userns,pidns: Force thread group sharing, not signal handler sharing. unshare: Unsharing a thread does not require unsharing a vm nsfs: Add a show_path method to fix mountinfo mnt: fs_fully_visible enforce noexec and nosuid if !SB_I_NOEXEC vfs: Commit to never having exectuables on proc and sysfs. |
||
|
|
43af9872f5 |
Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Thomas Gleixner:
"This udpate contains:
- rework the irq vector array to store a pointer to the irq
descriptor instead of the irq number to avoid a lookup of the irq
descriptor in the irq entry path
- lguest interrupt handling cleanups
- conversion of the local apic timer to the new clockevent callbacks
- preparatory changes for the irq argument removal of interrupt flow
handlers"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Do not dereference irq descriptor before checking it
tools/lguest: Clean up include dir
tools/lguest: Fix redefinition of struct virtio_pci_cfg_cap
x86/irq: Store irq descriptor in vector array
genirq: Provide irq_desc_has_action
x86/irq: Get rid of an indentation level
x86/irq: Rename VECTOR_UNDEFINED to VECTOR_UNUSED
x86/irq: Replace numeric constant
x86/irq: Protect smp_cleanup_move
x86/lguest: Do not setup unused irq vectors
x86/lguest: Clean up lguest_setup_irq
x86/apic: Drop local_irq_save/restore in timer callbacks
x86/apic: Migrate apic timer to new set_state interface
x86/irq: Use access helper irq_data_get_affinity_mask()
x86/irq: Use accessor irq_data_get_irq_handler_data()
x86/irq: Use accessor irq_data_get_node()
|
||
|
|
17e6b00ac4 |
Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"This updated pull request does not contain the last few GIC related
patches which were reported to cause a regression. There is a fix
available, but I let it breed for a couple of days first.
The irq departement provides:
- new infrastructure to support non PCI based MSI interrupts
- a couple of new irq chip drivers
- the usual pile of fixlets and updates to irq chip drivers
- preparatory changes for removal of the irq argument from interrupt
flow handlers
- preparatory changes to remove IRQF_VALID"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources
irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2
irqchip: Add documentation for the bcm2836 interrupt controller
irqchip/bcm2835: Add support for being used as a second level controller
irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ
PCI: xilinx: Fix typo in function name
irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance
irqchip/gic: Only allow the primary GIC to set the CPU map
PCI/MSI: pci-xgene-msi: Consolidate chained IRQ handler install/remove
unicore32/irq: Prepare puv3_gpio_handler for irq argument removal
tile/pci_gx: Prepare trio_handle_level_irq for irq argument removal
m68k/irq: Prepare irq handlers for irq argument removal
C6X/megamode-pic: Prepare megamod_irq_cascade for irq argument removal
blackfin: Prepare irq handlers for irq argument removal
arc/irq: Prepare idu_cascade_isr for irq argument removal
sparc/irq: Use access helper irq_data_get_affinity_mask()
sparc/irq: Use helper irq_data_get_irq_handler_data()
parisc/irq: Use access helper irq_data_get_affinity_mask()
mn10300/irq: Use access helper irq_data_get_affinity_mask()
irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removal
...
|
||
|
|
5e359bf221 |
Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Rather large, but nothing exiting:
- new range check for settimeofday() to prevent that boot time
becomes negative.
- fix for file time rounding
- a few simplifications of the hrtimer code
- fix for the proc/timerlist code so the output of clock realtime
timers is accurate
- more y2038 work
- tree wide conversion of clockevent drivers to the new callbacks"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (88 commits)
hrtimer: Handle failure of tick_init_highres() gracefully
hrtimer: Unconfuse switch_hrtimer_base() a bit
hrtimer: Simplify get_target_base() by returning current base
hrtimer: Drop return code of hrtimer_switch_to_hres()
time: Introduce timespec64_to_jiffies()/jiffies_to_timespec64()
time: Introduce current_kernel_time64()
time: Introduce struct itimerspec64
time: Add the common weak version of update_persistent_clock()
time: Always make sure wall_to_monotonic isn't positive
time: Fix nanosecond file time rounding in timespec_trunc()
timer_list: Add the base offset so remaining nsecs are accurate for non monotonic timers
cris/time: Migrate to new 'set-state' interface
kernel: broadcast-hrtimer: Migrate to new 'set-state' interface
xtensa/time: Migrate to new 'set-state' interface
unicore/time: Migrate to new 'set-state' interface
um/time: Migrate to new 'set-state' interface
sparc/time: Migrate to new 'set-state' interface
sh/localtimer: Migrate to new 'set-state' interface
score/time: Migrate to new 'set-state' interface
s390/time: Migrate to new 'set-state' interface
...
|
||
|
|
102178108e |
ARM: SoC driver updates for v4.3
Some releases this branch is nearly empty, others we have more stuff. It
tends to gather drivers that need SoC modification or dependencies such
that they have to (also) go in through our tree.
For this release, we have merged in part of the reset controller tree
(with handshake that the parts we have merged in will remain stable),
as well as dependencies on a few clock branches.
In general, new items here are:
- Qualcomm driver for SMM/SMD, which is how they communicate with the
coprocessors on (some) of their platforms
- Memory controller work for ARM's PL172 memory controller
- Reset drivers for various platforms
- PMU power domain support for Marvell platforms
- Tegra support for T132/T210 SoCs: PMC, fuse, memory controller per-SoC support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=B6jn
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Some releases this branch is nearly empty, others we have more stuff.
It tends to gather drivers that need SoC modification or dependencies
such that they have to (also) go in through our tree.
For this release, we have merged in part of the reset controller tree
(with handshake that the parts we have merged in will remain stable),
as well as dependencies on a few clock branches.
In general, new items here are:
- Qualcomm driver for SMM/SMD, which is how they communicate with the
coprocessors on (some) of their platforms
- memory controller work for ARM's PL172 memory controller
- reset drivers for various platforms
- PMU power domain support for Marvell platforms
- Tegra support for T132/T210 SoCs: PMC, fuse, memory controller
per-SoC support"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (49 commits)
ARM: tegra: cpuidle: implement cpuidle_state.enter_freeze()
ARM: tegra: Disable cpuidle if PSCI is available
soc/tegra: pmc: Use existing pclk reference
soc/tegra: pmc: Remove unnecessary return statement
soc: tegra: Remove redundant $(CONFIG_ARCH_TEGRA) in Makefile
memory: tegra: Add Tegra210 support
memory: tegra: Add support for a variable-size client ID bitfield
clk: shmobile: rz: Add CPG/MSTP Clock Domain support
clk: shmobile: rcar-gen2: Add CPG/MSTP Clock Domain support
clk: shmobile: r8a7779: Add CPG/MSTP Clock Domain support
clk: shmobile: r8a7778: Add CPG/MSTP Clock Domain support
clk: shmobile: Add CPG/MSTP Clock Domain support
ARM: dove: create a proper PMU driver for power domains, PMU IRQs and resets
reset: reset-zynq: Adding support for Xilinx Zynq reset controller.
docs: dts: Added documentation for Xilinx Zynq Reset Controller bindings.
MIPS: ath79: Add the reset controller to the AR9132 dtsi
reset: Add a driver for the reset controller on the AR71XX/AR9XXX
devicetree: Add bindings for the ATH79 reset controller
reset: socfpga: Update reset-socfpga to read the altr,modrst-offset property
doc: dt: add documentation for lpc1850-rgu reset driver
...
|
||
|
|
50686e8a3a |
ARM: SoC platform updates for v4.3
New or improved SoC support: - Addition of support for Atmel's SAMA5D2 SoC - Addition of Freescale i.MX6UL - Improved support of TI's DM814x platform - Misc fixes and improvements for RockChip platforms - Marvell MVEBU suspend/resume support A few driver changes that ideally would belong in the drivers branch are also here (acked by appropriate maintainers): - Power key input driver for Freescale platforms (svns) - RTC driver updates for Freescale platforms (svns/mxc) - Clk fixes for TI DM814/816X + a bunch of other changes for various platforms -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJV5Mo6AAoJEIwa5zzehBx3VnMP/28LFJVUjIbd2xjJBo2gbSwV jN7uGlTkKU+1kHjZqnUPuirlBxBzsXKgRfBvCoeu0cPOggwmFcaF915/HHPz7xuz vTP7k98+Y5nSXScIohWkWCdZTpKKjve4sn74rXmiNakTUiuaHf5lKut/m7ldVrWd hN1o9W4LN+5O1mOYbc9ZD98v3bkDb6eu+a22oK7qemXiEiQi+NIMoDx+IR2bd4pA FeDaW7sOFWTEYU/p+M5nZNvI3n53P0/mlB5rPRiAYRjhQf9DrWHm5G7HdnMkUkgo /s8/QlVjBkJwhkY0TqpwtHY23JjSSB6UtCnXzb1eVAkX1nJN6PJQpcpCz1zJhd9q +sJ2k1zEvrfomJCK7/iZ1ubQE09KlJLEeb8xi5xCwD0MBOBAYC31bovDVAswCitV 8NHnfltEG+wCMyX955eqqGkVxkcw8sJMJUK5A95aK6w+vKqjd7gUgLJjXFC1u4eN ECuVVUf1hVmUEmM799CDayTlfGDt4oGLmHGao+SiSCVc1XbG9HkWr7Lcgr6u9UHr lNv3RIe6Axb85xxIU0/9hqLHrtB85uEQjjlbnQx3o7u8RsSOeaiZvCz4BzcjP9E1 VGyD6zkRWhuDiMFlPVXiAX0qIH5xSjIWkC0wPNJNy8eWFH9tkfGL0mOlLbl09oGR gtuvOrjbF/BhILkPw38y =8T5Z -----END PGP SIGNATURE----- Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "New or improved SoC support: - add support for Atmel's SAMA5D2 SoC - add support for Freescale i.MX6UL - improved support for TI's DM814x platform - misc fixes and improvements for RockChip platforms - Marvell MVEBU suspend/resume support A few driver changes that ideally would belong in the drivers branch are also here (acked by appropriate maintainers): - power key input driver for Freescale platforms (svns) - RTC driver updates for Freescale platforms (svns/mxc) - clk fixes for TI DM814/816X + a bunch of other changes for various platforms" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: rockchip: pm: Fix PTR_ERR() argument ARM: imx: mach-imx6ul: Fix allmodconfig build clk: ti: fix for definition movement ARM: uniphier: drop v7_invalidate_l1 call at secondary entry memory: kill off set_irq_flags usage rtc: snvs: select option REGMAP_MMIO ARM: brcmstb: select ARCH_DMA_ADDR_T_64BIT for LPAE ARM: BCM: Enable ARM erratum 798181 for BRCMSTB ARM: OMAP2+: Fix power domain operations regression caused by 81xx ARM: rockchip: enable PMU_GPIOINT_WAKEUP_EN when entering shallow suspend ARM: rockchip: set correct stabilization thresholds in suspend ARM: rockchip: rename osc_switch_to_32k variable ARM: imx6ul: add fec MAC refrence clock and phy fixup init ARM: imx6ul: add fec bits to GPR syscon definition rtc: mxc: add support of device tree dt-binding: document the binding for mxc rtc rtc: mxc: use a second rtc clock ARM: davinci: cp_intc: use IRQCHIP_SKIP_SET_WAKE instead of irq_set_wake callback soc: mediatek: Fix SCPSYS compilation ARM: at91/soc: add basic support for new sama5d2 SoC ... |
||
|
|
c5fc249862 |
ARM: SoC cleanups for v4.3
A large cleanup branch this release, with a healthy 10k negative line delta.
Most of this is removal of legacy (non-DT) support of shmobile
platforms. There is also removal of two non-DT platforms on OMAP,
and the plat-samsung directory is cleaned out by moving most of the
previously shared-location-but-not-actually-shared files from there to
the appropriate mach directories instead.
There are other sets of changes in here as well:
- Rob Herring removed use of set_irq_flags under all platforms and
moved to genirq alternatives
- A series of timer API conversions to set-state interface
- ep93xx, nomadik and ux500 cleanups from Linus Walleij
- __init annotation fixes from Nicolas Pitre
+ a bunch of other changes that all add up to a nice set of cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=acy4
-----END PGP SIGNATURE-----
Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Olof Johansson:
"A large cleanup branch this release, with a healthy 10k negative line
delta.
Most of this is removal of legacy (non-DT) support of shmobile
platforms. There is also removal of two non-DT platforms on OMAP, and
the plat-samsung directory is cleaned out by moving most of the
previously shared-location-but-not-actually-shared files from there to
the appropriate mach directories instead.
There are other sets of changes in here as well:
- Rob Herring removed use of set_irq_flags under all platforms and
moved to genirq alternatives
- a series of timer API conversions to set-state interface
- ep93xx, nomadik and ux500 cleanups from Linus Walleij
- __init annotation fixes from Nicolas Pitre
+ a bunch of other changes that all add up to a nice set of cleanups"
* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (108 commits)
ARM/fb: ep93xx: switch framebuffer to use modedb only
ARM: gemini: Setup timer3 as free running timer
ARM: gemini: Use timer1 for clockevent
ARM: gemini: Add missing register definitions for gemini timer
ARM: ep93xx/timer: Migrate to new 'set-state' interface
ARM: nomadik: push accelerometer down to boards
ARM: nomadik: move l2x0 setup to device tree
ARM: nomadik: selectively enable UART0 on boards
ARM: nomadik: move hog code to use DT hogs
ARM: shmobile: Fix mismerges
ARM: ux500: simplify secondary CPU boot
ARM: SAMSUNG: remove keypad-core header in plat-samsung
ARM: SAMSUNG: local watchdog-reset header in mach-s3c64xx
ARM: SAMSUNG: local onenand-core header in mach-s3c64xx
ARM: SAMSUNG: local irq-uart header in mach-s3c64xx
ARM: SAMSUNG: local backlight header in mach-s3c64xx
ARM: SAMSUNG: local ata-core header in mach-s3c64xx
ARM: SAMSUNG: local regs-usb-hsotg-phy header in mach-s3c64xx
ARM: SAMSUNG: local spi-core header in mach-s3c24xx
ARM: SAMSUNG: local nand-core header in mach-s3c24xx
...
|
||
|
|
25525bea46 |
Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar: "The dominant change in this cycle was the continued work to isolate kernel drivers from MTRR legacies: this tree gets rid of all kernel internal driver interfaces to MTRRs (mostly by rewriting it to proper PAT interfaces), the only access left is the /proc/mtrr ABI. This work was done by Luis R Rodriguez. There's also some related PCI interface additions for which I've Cc:-ed Bjorn" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) x86/mm/mtrr: Remove kernel internal MTRR interfaces: unexport mtrr_add() and mtrr_del() s390/io: Add pci_iomap_wc() and pci_iomap_wc_range() drivers/dma/iop-adma: Use dma_alloc_writecombine() kernel-style drivers/video/fbdev/vt8623fb: Use arch_phys_wc_add() and pci_iomap_wc() drivers/video/fbdev/s3fb: Use arch_phys_wc_add() and pci_iomap_wc() drivers/video/fbdev/arkfb.c: Use arch_phys_wc_add() and pci_iomap_wc() PCI: Add pci_iomap_wc() variants drivers/video/fbdev/gxt4500: Use pci_ioremap_wc_bar() to map framebuffer drivers/video/fbdev/kyrofb: Use arch_phys_wc_add() and pci_ioremap_wc_bar() drivers/video/fbdev/i740fb: Use arch_phys_wc_add() and pci_ioremap_wc_bar() PCI: Add pci_ioremap_wc_bar() x86/mm: Make kernel/check.c explicitly non-modular x86/mm/pat: Make mm/pageattr[-test].c explicitly non-modular x86/mm/pat: Add comments to cachemode translation tables arch/*/io.h: Add ioremap_uc() to all architectures drivers/video/fbdev/atyfb: Use arch_phys_wc_add() and ioremap_wc() drivers/video/fbdev/atyfb: Replace MTRR UC hole with strong UC drivers/video/fbdev/atyfb: Clarify ioremap() base and length used drivers/video/fbdev/atyfb: Carve out framebuffer length fudging into a helper x86/mm, asm-generic: Add IOMMU ioremap_uc() variant default ... |
||
|
|
5778077d03 |
Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm changes from Ingo Molnar:
"The biggest changes in this cycle were:
- Revamp, simplify (and in some cases fix) Time Stamp Counter (TSC)
primitives. (Andy Lutomirski)
- Add new, comprehensible entry and exit handlers written in C.
(Andy Lutomirski)
- vm86 mode cleanups and fixes. (Brian Gerst)
- 32-bit compat code cleanups. (Brian Gerst)
The amount of simplification in low level assembly code is already
palpable:
arch/x86/entry/entry_32.S | 130 +----
arch/x86/entry/entry_64.S | 197 ++-----
but more simplifications are planned.
There's also the usual laudry mix of low level changes - see the
changelog for details"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (83 commits)
x86/asm: Drop repeated macro of X86_EFLAGS_AC definition
x86/asm/msr: Make wrmsrl() a function
x86/asm/delay: Introduce an MWAITX-based delay with a configurable timer
x86/asm: Add MONITORX/MWAITX instruction support
x86/traps: Weaken context tracking entry assertions
x86/asm/tsc: Add rdtscll() merge helper
selftests/x86: Add syscall_nt selftest
selftests/x86: Disable sigreturn_64
x86/vdso: Emit a GNU hash
x86/entry: Remove do_notify_resume(), syscall_trace_leave(), and their TIF masks
x86/entry/32: Migrate to C exit path
x86/entry/32: Remove 32-bit syscall audit optimizations
x86/vm86: Rename vm86->v86flags and v86mask
x86/vm86: Rename vm86->vm86_info to user_vm86
x86/vm86: Clean up vm86.h includes
x86/vm86: Move the vm86 IRQ definitions to vm86.h
x86/vm86: Use the normal pt_regs area for vm86
x86/vm86: Eliminate 'struct kernel_vm86_struct'
x86/vm86: Move fields from 'struct kernel_vm86_struct' to 'struct vm86'
x86/vm86: Move vm86 fields out of 'thread_struct'
...
|
||
|
|
56963d99b7 |
Merge branches 'pm-sleep', 'pm-domains' and 'pm-avs'
* pm-sleep: PM / suspend: make sync() on suspend-to-RAM build-time optional PM / sleep: Allow devices without runtime PM to do direct-complete PM / autosleep: Use workqueue for user space wakeup sources garbage collector * pm-domains: PM / Domains: Fix typo in description of genpd_dev_pm_detach() PM / Domains: Remove unusable governor dummies PM / Domains: Make pm_genpd_init() available to modules PM / domains: Align column headers and data in pm_genpd_summary output PM / Domains: Return -EPROBE_DEFER if we fail to init or turn-on domain PM / Domains: Correct unit address in power-controller example PM / Domains: Remove intermediate states from the power off sequence * pm-avs: PM / AVS: rockchip-io: add io selectors and supplies for rk3368 PM / AVS: rockchip-io: depend on CONFIG_POWER_AVS |
||
|
|
5cf896b3c7 |
Merge branches 'pm-cpuidle', 'pm-devfreq' and 'pm-clk'
* pm-cpuidle: cpuidle/coupled: Remove redundant 'dev' argument of cpuidle_state_is_coupled() cpuidle/coupled: Remove cpuidle_device::safe_state_index intel_idle: Skylake Client Support intel_idle: allow idle states to be freeze-mode specific * pm-devfreq: PM / devfreq: exynos-ppmu: Update documentation to support PPMUv2 PM / devfreq: exynos-ppmu: Add the support of PPMUv2 for Exynos5433 PM / devfreq: event: Remove incorrect property in exynos-ppmu DT binding * pm-clk: PM / clk: don't return int on __pm_clk_enable() |
||
|
|
ac2a29c8a4 |
Merge branch 'pm-opp'
* pm-opp: PM / OPP: Drop unlikely before IS_ERR(_OR_NULL) PM / OPP: Fix static checker warning (broken 64bit big endian systems) PM / OPP: Free resources and properly return error on failure cpufreq-dt: make scaling_boost_freqs sysfs attr available when boost is enabled cpufreq: dt: Add support for turbo/boost mode cpufreq: dt: Add support for operating-points-v2 bindings cpufreq: Allow drivers to enable boost support after registering driver cpufreq: Update boost flag while initializing freq table from OPPs PM / OPP: add dev_pm_opp_is_turbo() helper PM / OPP: Add helpers for initializing CPU OPPs PM / OPP: Add support for opp-suspend PM / OPP: Add OPP sharing information to OPP library PM / OPP: Add clock-latency-ns support PM / OPP: Add support to parse "operating-points-v2" bindings PM / OPP: Break _opp_add_dynamic() into smaller functions PM / OPP: Allocate dev_opp from _add_device_opp() PM / OPP: Create _remove_device_opp() for freeing dev_opp PM / OPP: Relocate few routines PM / OPP: Create a directory for opp bindings PM / OPP: Update bindings to make opp-hz a 64 bit value |
||
|
|
4ffe18c255 |
Merge branch 'pm-cpufreq'
* pm-cpufreq: (53 commits) cpufreq: speedstep-lib: Use monotonic clock cpufreq: powernv: Increase the verbosity of OCC console messages cpufreq: sfi: use kmemdup rather than duplicating its implementation cpufreq: drop !cpufreq_driver check from cpufreq_parse_governor() cpufreq: rename cpufreq_real_policy as cpufreq_user_policy cpufreq: remove redundant 'policy' field from user_policy cpufreq: remove redundant 'governor' field from user_policy cpufreq: update user_policy.* on success cpufreq: use memcpy() to copy policy cpufreq: remove redundant CPUFREQ_INCOMPATIBLE notifier event cpufreq: mediatek: Add MT8173 cpufreq driver dt-bindings: mediatek: Add MT8173 CPU DVFS clock bindings intel_pstate: append more Oracle OEM table id to vendor bypass list intel_pstate: Add SKY-S support intel_pstate: Fix possible overflow complained by Coverity cpufreq: Correct a freq check in cpufreq_set_policy() cpufreq: Lock CPU online/offline in cpufreq_register_driver() cpufreq: Replace recover_policy with new_policy in cpufreq_online() cpufreq: Separate CPU device registration from CPU online cpufreq: powernv: Restore cpu frequency to policy->cur on unthrottling ... |
||
|
|
c7a7b418dd |
cpufreq: rename cpufreq_real_policy as cpufreq_user_policy
Its all about caching min/max freq requested by userspace, and the name 'cpufreq_real_policy' doesn't fit that well. Rename it to cpufreq_user_policy. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
88dc438495 |
cpufreq: remove redundant 'policy' field from user_policy
Its always same as policy->policy, and there is no need to keep another copy of it. Remove it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
e27f8bd248 |
cpufreq: remove redundant 'governor' field from user_policy
Its always same as policy->governor, and there is no need to keep another copy of it. Remove it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
6bfb7c7434 |
cpufreq: remove redundant CPUFREQ_INCOMPATIBLE notifier event
What's being done from CPUFREQ_INCOMPATIBLE, can also be done with CPUFREQ_ADJUST. There is nothing special with CPUFREQ_INCOMPATIBLE notifier. Kill CPUFREQ_INCOMPATIBLE and fix its usage sites. This also updates the numbering of notifier events to remove holes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
|
65a99597f0 |
Merge branch 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull NOHZ updates from Ingo Molnar:
"The main changes, mostly written by Frederic Weisbecker, include:
- Fix some jiffies based cputime assumptions. (No real harm because
the concerned code isn't used by full dynticks.)
- Simplify jiffies <-> usecs conversions. Remove dead code.
- Remove early hacks on nohz full code that avoided messing up idle
nohz internals. Now nohz integrates well full and idle and such
hack have become needless.
- Restart nohz full tick from irq exit. (A simplification and a
preparation for future optimization on scheduler kick to nohz
full)
- Code cleanups.
- Tile driver isolation enhancement on top of nohz. (Chris Metcalf)"
* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
nohz: Remove useless argument on tick_nohz_task_switch()
nohz: Move tick_nohz_restart_sched_tick() above its users
nohz: Restart nohz full tick from irq exit
nohz: Remove idle task special case
nohz: Prevent tilegx network driver interrupts
alpha: Fix jiffies based cputime assumption
apm32: Fix cputime == jiffies assumption
jiffies: Remove HZ > USEC_PER_SEC special case
|
||
|
|
a1d8561172 |
Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The biggest change in this cycle is the rewrite of the main SMP load
balancing metric: the CPU load/utilization. The main goal was to make
the metric more precise and more representative - see the changelog of
this commit for the gory details:
|
||
|
|
41d859a83c |
Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Main perf kernel side changes:
- uprobes updates/fixes. (Oleg Nesterov)
- Add PERF_RECORD_SWITCH to indicate context switches and use it in
tooling. (Adrian Hunter)
- Support BPF programs attached to uprobes and first steps for BPF
tooling support. (Wang Nan)
- x86 generic x86 MSR-to-perf PMU driver. (Andy Lutomirski)
- x86 Intel PT, LBR and BTS updates. (Alexander Shishkin)
- x86 Intel Skylake support. (Andi Kleen)
- x86 Intel Knights Landing (KNL) RAPL support. (Dasaratharaman
Chandramouli)
- x86 Intel Broadwell-DE uncore support. (Kan Liang)
- x86 hw breakpoints robustization (Andy Lutomirski)
Main perf tooling side changes:
- Support Intel PT in several tools, enabling the use of the
processor trace feature introduced in Intel Broadwell processors:
(Adrian Hunter)
# dmesg | grep Performance
# [0.188477] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
# perf record -e intel_pt//u -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.216 MB perf.data ]
# perf script # then navigate in the tool output to some area, like this one:
184 1030 dl_main (/usr/lib64/ld-2.17.so) => 7f21ba661440 dl_main (/usr/lib64/ld-2.17.so)
185 1457 dl_main (/usr/lib64/ld-2.17.so) => 7f21ba669f10 _dl_new_object (/usr/lib64/ld-2.17.so)
186 9f37 _dl_new_object (/usr/lib64/ld-2.17.so) => 7f21ba677b90 strlen (/usr/lib64/ld-2.17.so)
187 7ba3 strlen (/usr/lib64/ld-2.17.so) => 7f21ba677c75 strlen (/usr/lib64/ld-2.17.so)
188 7c78 strlen (/usr/lib64/ld-2.17.so) => 7f21ba669f3c _dl_new_object (/usr/lib64/ld-2.17.so)
189 9f8a _dl_new_object (/usr/lib64/ld-2.17.so) => 7f21ba65fab0 calloc@plt (/usr/lib64/ld-2.17.so)
190 fab0 calloc@plt (/usr/lib64/ld-2.17.so) => 7f21ba675e70 calloc (/usr/lib64/ld-2.17.so)
191 5e87 calloc (/usr/lib64/ld-2.17.so) => 7f21ba65fa90 malloc@plt (/usr/lib64/ld-2.17.so)
192 fa90 malloc@plt (/usr/lib64/ld-2.17.so) => 7f21ba675e60 malloc (/usr/lib64/ld-2.17.so)
193 5e68 malloc (/usr/lib64/ld-2.17.so) => 7f21ba65fa80 __libc_memalign@plt (/usr/lib64/ld-2.17.so)
194 fa80 __libc_memalign@plt (/usr/lib64/ld-2.17.so) => 7f21ba675d50 __libc_memalign (/usr/lib64/ld-2.17.so)
195 5d63 __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba675e20 __libc_memalign (/usr/lib64/ld-2.17.so)
196 5e40 __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba675d73 __libc_memalign (/usr/lib64/ld-2.17.so)
197 5d97 __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba675e18 __libc_memalign (/usr/lib64/ld-2.17.so)
198 5e1e __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba675df9 __libc_memalign (/usr/lib64/ld-2.17.so)
199 5e10 __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba669f8f _dl_new_object (/usr/lib64/ld-2.17.so)
200 9fc2 _dl_new_object (/usr/lib64/ld-2.17.so) => 7f21ba678e70 memcpy (/usr/lib64/ld-2.17.so)
201 8e8c memcpy (/usr/lib64/ld-2.17.so) => 7f21ba678ea0 memcpy (/usr/lib64/ld-2.17.so)
- Add support for using several Intel PT features (CYC, MTC packets),
the relevant documentation was updated in:
tools/perf/Documentation/intel-pt.txt
briefly describing those packets, its purposes, how to configure
them in the event config terms and relevant external documentation
for further reading. (Adrian Hunter)
- Introduce support for probing at an absolute address, for user and
kernel 'perf probe's, useful when one have the symbol maps on a
developer machine but not on an embedded system. (Wang Nan)
- Add Intel BTS support, with a call-graph script to show it and PT
in use in a GUI using 'perf script' python scripting with
postgresql and Qt. (Adrian Hunter)
- Allow selecting the type of callchains per event, including
disabling callchains in all but one entry in an event list, to save
space, and also to ask for the callchains collected in one event to
be used in other events. (Kan Liang)
- Beautify more syscall arguments in 'perf trace': (Arnaldo Carvalho
de Melo)
* A bunch more translate file/pathnames from pointers to strings.
* Convert numbers to strings for the 'keyctl' syscall 'option'
arg.
* Add missing 'clockid' entries.
- Introduce 'srcfile' sort key: (Andi Kleen)
# perf record -F 10000 usleep 1
# perf report --stdio --dsos '[kernel.vmlinux]' -s srcfile
<SNIP>
# Overhead Source File
26.49% copy_page_64.S
5.49% signal.c
0.51% msr.h
#
It can be combined with other fields, for instance, experiment with
'-s srcfile,symbol'.
There are some oddities in some distros and with some specific
DSOs, being investigated, so your mileage may vary.
- Support per-event 'freq' term: (Namhyung Kim)
$ perf record -e 'cpu/instructions,freq=1234/',cycles -c 1000 sleep 1
$ perf evlist -F
cpu/instructions,freq=1234/: sample_freq=1234
cycles: sample_period=1000
$
- Deref sys_enter pointer args with contents from probe:vfs_getname,
showing pathnames instead of pointers in many syscalls in 'perf
trace'. (Arnaldo Carvalho de Melo)
- Stop collecting /proc/kallsyms in perf.data files, saving about
4.5MB on a typical x86-64 system, use the the symbol resolution
routines used in all the other tools (report, top, etc) now that we
can ask libtraceevent to use perf's symbol resolution code.
(Arnaldo Carvalho de Melo)
- Allow filtering out of perf's PID via 'perf record --exclude-perf'.
(Wang Nan)
- 'perf trace' now supports syscall groups, like strace, i.e:
$ trace -e file touch file
Will expand 'file' into multiple, file related, syscalls. More
work needed to add extra groups for other syscall groups, and also
to complement what was added for the 'file' group, included as a
proof of concept. (Arnaldo Carvalho de Melo)
- Add lock_pi stresser to 'perf bench futex', to test the kernel code
related to FUTEX_(UN)LOCK_PI. (Davidlohr Bueso)
- Let user have timestamps with per-thread recording in 'perf record'
(Adrian Hunter)
- ... and tons of other changes, see the shortlog and the Git log for
details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (240 commits)
perf evlist: Add backpointer for perf_env to evlist
perf tools: Rename perf_session_env to perf_env
perf tools: Do not change lib/api/fs/debugfs directly
perf tools: Add tracing_path and remove unneeded functions
perf buildid: Introduce sysfs/filename__sprintf_build_id
perf evsel: Add a backpointer to the evlist a evsel is in
perf trace: Add header with copyright and background info
perf scripts python: Add new compaction-times script
perf stat: Get correct cpu id for print_aggr
tools lib traceeveent: Allow for negative numbers in print format
perf script: Add --[no-]-demangle/--[no-]-demangle-kernel
tracing/uprobes: Do not print '0x (null)' when offset is 0
perf probe: Support probing at absolute address
perf probe: Fix error reported when offset without function
perf probe: Fix list result when address is zero
perf probe: Fix list result when symbol can't be found
tools build: Allow duplicate objects in the object list
perf tools: Remove export.h from MANIFEST
perf probe: Prevent segfault when reading probe point with absolute address
perf tools: Update Intel PT documentation
...
|
||
|
|
4658000955 |
Merge branch 'mm-kasan-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/kasan changes from Ingo Molnar: "These are two KASAN changes that factor out (and generalize) x86 specific KASAN code from x86 to mm" * 'mm-kasan-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() x86/kasan: Define KASAN_SHADOW_OFFSET per architecture |
||
|
|
498012511a |
Merge branch 'device-properties'
* device-properties: device property: check fwnode type in to_of_node() device property: attach 'else if' to the proper 'if' device property: fallback to pset when gettng one string device property: fix potential NULL pointer dereference |
||
|
|
5d2a1a927d |
Merge branches 'acpi-pci', 'acpi-soc', 'acpi-ec' and 'acpi-osl'
* acpi-pci: ACPI, PCI: Penalize legacy IRQ used by ACPI SCI * acpi-soc: ACPI / LPSS: Ignore 10ms delay for Braswell * acpi-ec: ACPI / EC: Fix an issue caused by the serialized _Qxx evaluations * acpi-osl: ACPI / osl: replace custom implementation of readq / writeq |
||
|
|
ef5f5de069 |
Merge branch 'acpi-pm'
* acpi-pm: ACPI / bus: Move duplicate code to a separate new function mfd: Add support for Intel Sunrisepoint LPSS devices dmaengine: add a driver for Intel integrated DMA 64-bit mfd: make mfd_remove_devices() iterate in reverse order driver core: implement device_for_each_child_reverse() klist: implement klist_prev() Driver core: wakeup the parent device before trying probe ACPI / PM: Attach ACPI power domain only once PM / QoS: Make it possible to expose device latency tolerance to userspace ACPI / PM: Update the copyright notice and description of power.c |
||
|
|
73990fc810 |
Merge branches 'acpi-scan', 'acpi-processor' and 'acpi-assorted'
* acpi-scan: ACPI / bus: Move ACPI bus type registration ACPI / scan: Move bus operations and notification routines to bus.c ACPI / scan: Move device matching code to bus.c ACPI / scan: Move sysfs-related device code to a separate file * acpi-processor: PCC: Disable compilation by default ACPI: Decouple ACPI idle and ACPI processor drivers ACPI: Split out ACPI PSS from ACPI Processor driver PCC: Initialize PCC Mailbox earlier at boot ACPI / processor: remove leftover __refdata annotations * acpi-assorted: ACPI: fix acpi_debugfs_init prototype ACPI: Remove FSF mailing addresses |
||
|
|
5757bd6157 |
Merge branch 'core-types-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull inlining tuning from Ingo Molnar:
"A handful of inlining optimizations inspired by x86 work but
applicable in general"
* 'core-types-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
jiffies: Force inlining of {m,u}msecs_to_jiffies()
x86/hweight: Force inlining of __arch_hweight{32,64}()
linux/bitmap: Force inlining of bitmap weight functions
|
||
|
|
7073bc6612 |
Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"The main RCU changes in this cycle are:
- the combination of tree geometry-initialization simplifications and
OS-jitter-reduction changes to expedited grace periods. These two
are stacked due to the large number of conflicts that would
otherwise result.
- privatize smp_mb__after_unlock_lock().
This commit moves the definition of smp_mb__after_unlock_lock() to
kernel/rcu/tree.h, in recognition of the fact that RCU is the only
thing using this, that nothing else is likely to use it, and that
it is likely to go away completely.
- documentation updates.
- torture-test updates.
- misc fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
rcu,locking: Privatize smp_mb__after_unlock_lock()
rcu: Silence lockdep false positive for expedited grace periods
rcu: Don't disable CPU hotplug during OOM notifiers
scripts: Make checkpatch.pl warn on expedited RCU grace periods
rcu: Update MAINTAINERS entry
rcu: Clarify CONFIG_RCU_EQS_DEBUG help text
rcu: Fix backwards RCU_LOCKDEP_WARN() in synchronize_rcu_tasks()
rcu: Rename rcu_lockdep_assert() to RCU_LOCKDEP_WARN()
rcu: Make rcu_is_watching() really notrace
cpu: Wait for RCU grace periods concurrently
rcu: Create a synchronize_rcu_mult()
rcu: Fix obsolete priority-boosting comment
rcu: Use WRITE_ONCE in RCU_INIT_POINTER
rcu: Hide RCU_NOCB_CPU behind RCU_EXPERT
rcu: Add RCU-sched flavors of get-state and cond-sync
rcu: Add fastpath bypassing funnel locking
rcu: Rename RCU_GP_DONE_FQS to RCU_GP_DOING_FQS
rcu: Pull out wait_event*() condition into helper function
documentation: Describe new expedited stall warnings
rcu: Add stall warnings to synchronize_sched_expedited()
...
|
||
|
|
d4c90396ed |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.3: API: - the AEAD interface transition is now complete. - add top-level skcipher interface. Drivers: - x86-64 acceleration for chacha20/poly1305. - add sunxi-ss Allwinner Security System crypto accelerator. - add RSA algorithm to qat driver. - add SRIOV support to qat driver. - add LS1021A support to caam. - add i.MX6 support to caam" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (163 commits) crypto: algif_aead - fix for multiple operations on AF_ALG sockets crypto: qat - enable legacy VFs MPI: Fix mpi_read_buffer crypto: qat - silence a static checker warning crypto: vmx - Fixing opcode issue crypto: caam - Use the preferred style for memory allocations crypto: caam - Propagate the real error code in caam_probe crypto: caam - Fix the error handling in caam_probe crypto: caam - fix writing to JQCR_MS when using service interface crypto: hash - Add AHASH_REQUEST_ON_STACK crypto: testmgr - Use new skcipher interface crypto: skcipher - Add top-level skcipher interface crypto: cmac - allow usage in FIPS mode crypto: sahara - Use dmam_alloc_coherent crypto: caam - Add support for LS1021A crypto: qat - Don't move data inside output buffer crypto: vmx - Fixing GHASH Key issue on little endian crypto: vmx - Fixing AES-CTR counter bug crypto: null - Add missing Kconfig tristate for NULL2 crypto: nx - Add forward declaration for struct crypto_aead ... |
||
|
|
f36fc04e4c |
The clk framework changes for 4.3 are mostly updates to existing drivers
and the addition of new clock drivers. Stephen Boyd has also done a lot of subsystem-wide driver clean-ups (thanks!). There are also fixes to the framework core and changes to better split clock provider drivers from clock consumer drivers. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJV5KelAAoJEKI6nJvDJaTUwaQP/RVb70v6XSgMIePuOq3iaECT bclCAyito3YFwykrPPmQ1DucHvEjlWopeFwKqEE9VjNl07TVIH/OMGeonb9yErIY aN+FMoA9RUGVexMhy004q5sSbOEihAqTgKWaOiYoY8zAfJfeTpYXUoy34FcrW7MB j/cDDJgigtWe9zzcdrW04oT454lXQaSQuGX39tDCR0s0S3soYU2JyjkyBGiO5Yid 1yIMq/nzI8SrCwxwD/nFwQNtg7lqiAN291Nbi4At1vvG5r4RhNveuLGv8uJ50XRB xwy0sdHLIVJrIJ8OUcs1sY8wxu7ghDS8u+vjTNO2RzBf3KZWbuXWX+yVM7JQi4Ty 0iL5hGbvERy5E9QSzzH+Ox2jVt5e/r/dyvRf3oBDPVrFXhKusYhn6JmdUVJkTZ83 GTw2sQdEpcmry4z/50/MaqpZuXVZ09VTOCTqp8ToseJjsz9jXxVhQ4HdAwLc8cmV txWGRXuBxCB+2o8M0oky3IKS69VFFH5u6QQ0KG8+JYOrDDG7GcnJsFeV7mQjlu8g 3evYUILNAUfJGBpkOeLs654KUBHwUyXc87cUIKwjGaPruWb2048+kdCVrL3IFwPb sS/7Qn3DQ90pHFUTssDnWLz3X0IWT3H0iV4zZyAqqdARugEo+mpykmXmMWcWc3VR MrD1l3GVxLegEf242Zpo =QAiQ -----END PGP SIGNATURE----- Merge tag 'clk-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Michael Turquette: "The clk framework changes for 4.3 are mostly updates to existing drivers and the addition of new clock drivers. Stephen Boyd has also done a lot of subsystem-wide driver clean-ups (thanks!). There are also fixes to the framework core and changes to better split clock provider drivers from clock consumer drivers" * tag 'clk-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits) clk: s5pv210: add missing call to samsung_clk_of_add_provider() clk: pistachio: correct critical clock list clk: pistachio: Fix PLL rate calculation in integer mode clk: pistachio: Fix override of clk-pll settings from boot loader clk: pistachio: Fix 32bit integer overflows clk: tegra: Fix some static checker problems clk: qcom: Fix MSM8916 prng clock enable bit clk: Add missing header for 'bool' definition to clk-conf.h drivers/clk: appropriate __init annotation for const data clk: rockchip: register pll mux before pll itself clk: add bindings for the Ux500 clocks clk/ARM: move Ux500 PRCC bases to the device tree clk: remove duplicated code with __clk_set_parent_after clk: Convert __clk_get_name(hw->clk) to clk_hw_get_name(hw) clk: Constify clk_hw argument to provider APIs clk: Hi6220: add stub clock driver dt-bindings: clk: Hi6220: Document stub clock driver dt-bindings: arm: Hi6220: add doc for SRAM controller clk: atlas7: fix pll missed divide NR in fraction mode clk: atlas7: fix bit field and its root clk for coresight_tpiu ... |
||
|
|
26f8b7edc9 |
PCI changes for the v4.3 merge window:
Enumeration
Allocate ATS struct during enumeration (Bjorn Helgaas)
Embed ATS info directly into struct pci_dev (Bjorn Helgaas)
Reduce size of ATS structure elements (Bjorn Helgaas)
Stop caching ATS Invalidate Queue Depth (Bjorn Helgaas)
iommu/vt-d: Cache PCI ATS state and Invalidate Queue Depth (Bjorn Helgaas)
Move MPS configuration check to pci_configure_device() (Bjorn Helgaas)
Set MPS to match upstream bridge (Keith Busch)
ARM/PCI: Set MPS before pci_bus_add_devices() (Murali Karicheri)
Add pci_scan_root_bus_msi() (Lorenzo Pieralisi)
ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi() (Lorenzo Pieralisi)
Resource management
Call pci_read_bridge_bases() from core instead of arch code (Lorenzo Pieralisi)
PCI device hotplug
pciehp: Remove unused interrupt events (Bjorn Helgaas)
pciehp: Remove ignored MRL sensor interrupt events (Bjorn Helgaas)
pciehp: Handle invalid data when reading from non-existent devices (Jarod Wilson)
pciehp: Simplify pcie_poll_cmd() (Yijing Wang)
Use "slot" and "pci_slot" for struct hotplug_slot and struct pci_slot (Yijing Wang)
Protect pci_bus->slots with pci_slot_mutex, not pci_bus_sem (Yijing Wang)
Hold pci_slot_mutex while searching bus->slots list (Yijing Wang)
Power management
Disable async suspend/resume for JMicron multi-function SATA/AHCI (Zhang Rui)
Virtualization
Add ACS quirks for Intel I219-LM/V (Alex Williamson)
Restore ACS configuration as part of pci_restore_state() (Alexander Duyck)
MSI
Add pcibios_alloc_irq() and pcibios_free_irq() (Jiang Liu)
x86: Implement pcibios_alloc_irq() and pcibios_free_irq() (Jiang Liu)
Add helpers to manage pci_dev->irq and pci_dev->irq_managed (Jiang Liu)
Free legacy IRQ when enabling MSI/MSI-X (Jiang Liu)
ARM/PCI: Remove msi_controller from struct pci_sys_data (Lorenzo Pieralisi)
Remove unused pcibios_msi_controller() hook (Lorenzo Pieralisi)
Generic host bridge driver
Remove dependency on ARM-specific struct hw_pci (Jayachandran C)
Build setup-irq.o for arm64 (Jayachandran C)
Add arm64 support (Jayachandran C)
APM X-Gene host bridge driver
Add APM X-Gene PCIe 64-bit prefetchable window (Duc Dang)
Add support for a 64-bit prefetchable memory window (Duc Dang)
Drop owner assignment from platform_driver (Krzysztof Kozlowski)
Broadcom iProc host bridge driver
Allow BCMA bus driver to be built as module (Hauke Mehrtens)
Delete unnecessary checks before phy calls (Markus Elfring)
Add arm64 support (Ray Jui)
Synopsys DesignWare host bridge driver
Don't complain missing *config* reg space if va_cfg0 is set (Murali Karicheri)
TI DRA7xx host bridge driver
Disable pm_runtime on get_sync failure (Kishon Vijay Abraham I)
Add PM support (Kishon Vijay Abraham I)
Clear MSE bit during suspend so clocks will idle (Kishon Vijay Abraham I)
Add support to make GPIO drive PERST# line (Kishon Vijay Abraham I)
Xilinx AXI host bridge driver
Check for MSI interrupt flag before handling as INTx (Russell Joyce)
Miscellaneous
Fix Intersil/Techwell TW686[4589] AV capture class code (Krzysztof Hałasa)
Use PCI_CLASS_SERIAL_USB instead of bare number (Bjorn Helgaas)
Fix generic NCR 53c810 class code quirk (Bjorn Helgaas)
Fix TI816X class code quirk (Bjorn Helgaas)
Remove unused "pci_probe" flags (Bjorn Helgaas)
Host bridge driver code simplifications (Fabio Estevam)
Add dev_flags bit to access VPD through function 0 (Mark Rustad)
Add VPD function 0 quirk for Intel Ethernet devices (Mark Rustad)
Kill off set_irq_flags() usage (Rob Herring)
Remove Intel Cherrytrail D3 delays (Srinidhi Kasagar)
Clean up pci_find_capability() (Wei Yang)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=DX1r
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"PCI changes for the v4.3 merge window:
Enumeration:
- Allocate ATS struct during enumeration (Bjorn Helgaas)
- Embed ATS info directly into struct pci_dev (Bjorn Helgaas)
- Reduce size of ATS structure elements (Bjorn Helgaas)
- Stop caching ATS Invalidate Queue Depth (Bjorn Helgaas)
- iommu/vt-d: Cache PCI ATS state and Invalidate Queue Depth (Bjorn Helgaas)
- Move MPS configuration check to pci_configure_device() (Bjorn Helgaas)
- Set MPS to match upstream bridge (Keith Busch)
- ARM/PCI: Set MPS before pci_bus_add_devices() (Murali Karicheri)
- Add pci_scan_root_bus_msi() (Lorenzo Pieralisi)
- ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi() (Lorenzo Pieralisi)
Resource management:
- Call pci_read_bridge_bases() from core instead of arch code (Lorenzo Pieralisi)
PCI device hotplug:
- pciehp: Remove unused interrupt events (Bjorn Helgaas)
- pciehp: Remove ignored MRL sensor interrupt events (Bjorn Helgaas)
- pciehp: Handle invalid data when reading from non-existent devices (Jarod Wilson)
- pciehp: Simplify pcie_poll_cmd() (Yijing Wang)
- Use "slot" and "pci_slot" for struct hotplug_slot and struct pci_slot (Yijing Wang)
- Protect pci_bus->slots with pci_slot_mutex, not pci_bus_sem (Yijing Wang)
- Hold pci_slot_mutex while searching bus->slots list (Yijing Wang)
Power management:
- Disable async suspend/resume for JMicron multi-function SATA/AHCI (Zhang Rui)
Virtualization:
- Add ACS quirks for Intel I219-LM/V (Alex Williamson)
- Restore ACS configuration as part of pci_restore_state() (Alexander Duyck)
MSI:
- Add pcibios_alloc_irq() and pcibios_free_irq() (Jiang Liu)
- x86: Implement pcibios_alloc_irq() and pcibios_free_irq() (Jiang Liu)
- Add helpers to manage pci_dev->irq and pci_dev->irq_managed (Jiang Liu)
- Free legacy IRQ when enabling MSI/MSI-X (Jiang Liu)
- ARM/PCI: Remove msi_controller from struct pci_sys_data (Lorenzo Pieralisi)
- Remove unused pcibios_msi_controller() hook (Lorenzo Pieralisi)
Generic host bridge driver:
- Remove dependency on ARM-specific struct hw_pci (Jayachandran C)
- Build setup-irq.o for arm64 (Jayachandran C)
- Add arm64 support (Jayachandran C)
APM X-Gene host bridge driver:
- Add APM X-Gene PCIe 64-bit prefetchable window (Duc Dang)
- Add support for a 64-bit prefetchable memory window (Duc Dang)
- Drop owner assignment from platform_driver (Krzysztof Kozlowski)
Broadcom iProc host bridge driver:
- Allow BCMA bus driver to be built as module (Hauke Mehrtens)
- Delete unnecessary checks before phy calls (Markus Elfring)
- Add arm64 support (Ray Jui)
Synopsys DesignWare host bridge driver:
- Don't complain missing *config* reg space if va_cfg0 is set (Murali Karicheri)
TI DRA7xx host bridge driver:
- Disable pm_runtime on get_sync failure (Kishon Vijay Abraham I)
- Add PM support (Kishon Vijay Abraham I)
- Clear MSE bit during suspend so clocks will idle (Kishon Vijay Abraham I)
- Add support to make GPIO drive PERST# line (Kishon Vijay Abraham I)
Xilinx AXI host bridge driver:
- Check for MSI interrupt flag before handling as INTx (Russell Joyce)
Miscellaneous:
- Fix Intersil/Techwell TW686[4589] AV capture class code (Krzysztof Hałasa)
- Use PCI_CLASS_SERIAL_USB instead of bare number (Bjorn Helgaas)
- Fix generic NCR 53c810 class code quirk (Bjorn Helgaas)
- Fix TI816X class code quirk (Bjorn Helgaas)
- Remove unused "pci_probe" flags (Bjorn Helgaas)
- Host bridge driver code simplifications (Fabio Estevam)
- Add dev_flags bit to access VPD through function 0 (Mark Rustad)
- Add VPD function 0 quirk for Intel Ethernet devices (Mark Rustad)
- Kill off set_irq_flags() usage (Rob Herring)
- Remove Intel Cherrytrail D3 delays (Srinidhi Kasagar)
- Clean up pci_find_capability() (Wei Yang)"
* tag 'pci-v4.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (72 commits)
PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI
PCI: Set MPS to match upstream bridge
PCI: Move MPS configuration check to pci_configure_device()
PCI: Drop references acquired by of_parse_phandle()
PCI/MSI: Remove unused pcibios_msi_controller() hook
ARM/PCI: Remove msi_controller from struct pci_sys_data
ARM/PCI, designware, xilinx: Use pci_scan_root_bus_msi()
PCI: Add pci_scan_root_bus_msi()
ARM/PCI: Replace panic with WARN messages on failures
PCI: generic: Add arm64 support
PCI: Build setup-irq.o for arm64
PCI: generic: Remove dependency on ARM-specific struct hw_pci
PCI: imx6: Simplify a trivial if-return sequence
PCI: spear: Use BUG_ON() instead of condition followed by BUG()
PCI: dra7xx: Remove unneeded use of IS_ERR_VALUE()
PCI: Remove pci_ats_enabled()
PCI: Stop caching ATS Invalidate Queue Depth
PCI: Move ATS declarations to linux/pci.h so they're all together
PCI: Clean up ATS error handling
PCI: Use pci_physfn() rather than looking up physfn by hand
...
|
||
|
|
edc837da4b |
Besides the changes in MAINTAINERS we have:
- optimizations and improvements to existing LED class drivers
- improvements to the common LEDs DT documentation
- modifications of kirkwood-* dts files, to be in sync with patches for
leds-ns2 driver, that move LEDs mode mapping outside of the driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.17 (GNU/Linux)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=sa6j
-----END PGP SIGNATURE-----
Merge tag 'leds_for_4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"In this merge window we'd like to announce a change on the list of LED
subsystem maintainers - Bryan Wu decided to step back and handed over
the maintainership to me (Jacek Anaszewski), which entailed an update
of LED subsystem git tree URL.
Besides the changes in MAINTAINERS we have:
- optimizations and improvements to existing LED class drivers
- improvements to the common LEDs DT documentation
- modifications of kirkwood-* dts files, to be in sync with patches
for leds-ns2 driver, that move LEDs mode mapping outside of the
driver"
* tag 'leds_for_4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: Export OF module alias information in missing drivers
leds:lp55xx: use the private data instead of updating I2C device platform data
leds: syscon: Correct check for syscon_node_to_regmap() errors
leds: leds-fsg: Use devm_led_classdev_register
MAINTAINERS: Change LED subsystem git tree URL
leds/led-class: Add missing put_device()
ARM: Kirkwood: add modes-map property to ns2-leds nodes
leds: tlc591xx: Remove redundant I2C_FUNC_SMBUS_BYTE_DATA functionality check
leds: leds-ns2: depends on MACH_ARMADA_370
leds: leds-ns2: handle can_sleep GPIOs
leds: leds-ns2: move LED modes mapping outside of the driver
leds: lp8860: Constify reg_default tables
leds: Drop owner assignment from i2c_driver
leds: Allow compile test of LEDS_AAT1290 and LEDS_KTD2692 if !GPIOLIB
leds: Allow compile test of GPIO consumers if !GPIOLIB
DT: leds: Improve description of flash LEDs related properties
|
||
|
|
e5aeced6bc |
spi: Updates for v4.3
A few core tweaks this time together with the usual collection of driver
specific updates and fixes plus a larger than average selection of new
device support:
- Fix DMA mapping of unaligned vmalloc() buffers.
- Statistics tracking transfer volumes exposed via sysfs.
- New drivers for Freescale MPC5125, Intel Sunrise Point, Mediatek SoCs,
and Netlogic XLP SoCs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJV5F3EAAoJECTWi3JdVIfQ45kH/isvhUPuvaZS8zQggQ95xIjy
7uZMQzf2JHwmeFiYsqFuWdf6IVgGmg68cQ4ZIzyXk1quEJkOLNCrlOvn4Qv7z6lJ
fqr5qbU+BWrtv0IjN5szIx7BR+ZWQ9LHdZI651A1XbCPvU8H1PZL+PfWDK6pMHCM
tqCLUVgnwRYNT0ELmgl7Up8SWKMbs98Wit2dQzNvwrfEZ1GHTMk3ChYAABfMkKIU
wbuug6+cv5+VdhV73nX29BZXJj7+EyRATQknADQT3nugcXkMysi0IvLZIrSFEJTp
iBApQsO3EaOVUR5/hN6zHpS8lqZdEkQvlKRuodnW31dXLrIw7TyVDT1wWknRZeU=
=Jykk
-----END PGP SIGNATURE-----
Merge tag 'spi-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A few core tweaks this time together with the usual collection of
driver specific updates and fixes plus a larger than average selection
of new device support:
- fix DMA mapping of unaligned vmalloc() buffers
- statistics tracking transfer volumes exposed via sysfs
- new drivers for Freescale MPC5125, Intel Sunrise Point, Mediatek
SoCs, and Netlogic XLP SoCs"
* tag 'spi-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (66 commits)
spi: sh-msiof: Fix FIFO size to 64 word from 256 word
spi: fsl-(e)spi: Fix checking return value of devm_ioremap_resource
spi: Add DT bindings documentation for Netlogic XLP SPI controller
spi/xlp: SPI controller driver for Netlogic XLP SoCs
spi: fsl-espi: add runtime PM
spi: fsl-(e)spi: simplify cleanup code
spi: fsl-(e)spi: migrate to using devm_ functions to simplify cleanup
spi: mediatek: fix SPI_CMD_PAUSE_IE macro error
spi: check bits_per_word in spi_setup
spi: mediatek: replace *_time name
spi: mediatek: add PM clk_prepare_enable fail flow
spi: mediatek: replace int with u32, delete TAB and define MTK_SPI_PAUSE_INT_STATUS marco
spi: mediatek: add linux/io.h include file
spi/bcm63xx-hsspi: add support for dual spi read/write
spi: dw: Allow interface drivers to limit data I/O to word sizes
dt: snps,dw-apb-ssi: Document new I/O data register width property
spi: Fall back to master maximum speed if no slave speed specified
spi: mediatek: use BIT() to instead of SPI_CMD_*_OFFSET
spi: medaitek: revise quirks compatibility style
spi: mediatek: fix spi incorrect endian usage
...
|
||
|
|
cf9d615f7f |
regulator: Updates for v4.3
The biggest changes in the core this time around have been some
refactorings that move us towards being able to drop the list of
regulators maintained by the core and instead just use the driver model
list maintained for the class devices for regulators which will make the
code smaller and avoid some potential bugs. Otherwise another fairly
quiet release for the regulator API, highlights include:
- A new API for setting voltages based on a minimum, target, maximum
triplet.
- Support for continuous voltage ranges rather than tables of explicit
steps in the PWM regulator, requiring less explicit configuration.
- New driver support for Dialog DA9215, Maxim 77843, Mediatek MT6311
and Qualcomm RPM.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJV5DCWAAoJECTWi3JdVIfQDgYH/3mNwtRcwslt8M1L8lzRVyf1
gRrJY5r4EUOcqqsLnQvDHdjgO2yowEolEd3Hd/GElZqzeFgwXaQ62kHwgqnvOt9k
O0l99FbU6ECpB56tSENrV1lfvBTlld9bEhq9NhxvNiWAdpGPqIcjvXfSH28GssJ0
NGr4Yt/A1DG6GsOWxKSODX56WJXJn4emKx3vHH+leUClNWwQVK6JunTmj5IPKLxW
K94Ke41L3JgAy18TLqvFNlTAC22QaHFaM8ul9v7gnPW+S8Bx15MCQz16rMkGViZV
c/DyCu69qCVFLI1svRrvB5oq700QT0GT6jANCVmw+CrkIkESwjS39kX861H6hk8=
=vrVx
-----END PGP SIGNATURE-----
Merge tag 'regulator-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The biggest changes in the core this time around have been some
refactorings that move us towards being able to drop the list of
regulators maintained by the core and instead just use the driver
model list maintained for the class devices for regulators which will
make the code smaller and avoid some potential bugs.
Otherwise another fairly quiet release for the regulator API,
highlights include:
- a new API for setting voltages based on a minimum, target, maximum
triplet
- support for continuous voltage ranges rather than tables of
explicit steps in the PWM regulator, requiring less explicit
configuration
- new driver support for Dialog DA9215, Maxim 77843, Mediatek MT6311
and Qualcomm RPM"
* tag 'regulator-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (70 commits)
regulator: mt6311: fix platform_no_drv_owner.cocci warnings
regulator: ltc3589: Remove unnecessary MODULE_ALIAS()
regulator: ad5398: Remove unnecessary MODULE_ALIAS()
regulator: pfuze100: Remove unnecessary MODULE_ALIAS()
regulator: core: use debug level print in regulator_check_drms
regulator: lp872x: handle error case
regulator: lp872x: use the private data instead of updating I2C device platform data
regulator: isl9305: Export OF module alias information
regulators: max77693: register driver earlier to avoid deferred probe
regulator: qcom_smd: Set n_voltages for pm8941_lnldo
regulator: core: Use IS_ERR_OR_NULL()
regulator: core: Define regulator_set_voltage_triplet()
regulator: Regulator driver for the Qualcomm RPM
regulator: pbias: Fix broken pbias disable functionality
regulator: core: Spelling fix
regulator: core: Use class device list for regulator_list in late init
regulator: core: Move more deallocation into class unregister
regulator: core: Reduce rdev locking region when releasing regulator
Input: Remove the max77843 haptic driver
Input: max77693: Add support for Maxim 77843
...
|
||
|
|
9c6a019c6e |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky: "The big one is support for fake NUMA, splitting a really large machine in more manageable piece improves performance in some cases, e.g. for a KVM host. The FICON Link Incident handling has been improved, this helps the operator to identify degraded or non-operational FICON connections. The save and restore of floating point and vector registers has been overhauled to allow the future use of vector registers in the kernel. A few small enhancement, magic sys-requests for the vt220 console via SCLP, some more assembler code has been converted to C, the PCI error handling is improved. And the usual cleanup and bug fixing" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (59 commits) s390/jump_label: Use %*ph to print small buffers s390/sclp_vt220: support magic sysrequests s390/ctrlchar: improve handling of magic sysrequests s390/numa: remove superfluous ARCH_WANT defines s390/3270: redraw screen on unsolicited device end s390/dcssblk: correct out of bounds array indexes s390/mm: simplify page table alloc/free code s390/pci: move debug messages to debugfs s390/nmi: initialize control register 0 earlier s390/zcrypt: use msleep() instead of mdelay() s390/hmcdrv: fix interrupt registration s390/setup: fix novx parameter s390/uaccess: remove uaccess_primary kernel parameter s390: remove unneeded sizeof(void *) comparisons s390/facilities: remove transactional-execution bits s390/numa: re-add DIE sched_domain_topology_level s390/dasd: enhance CUIR scope detection s390/dasd: fix failing path verification s390/vdso: emit a GNU hash s390/numa: make core to node mapping data dynamic ... |
||
|
|
4ff12049d6 |
USB patches for 4.3-rc1
Here's the big USB and PHY patchset for 4.3-rc1. As usual, the majority of the changes are in the USB gadget portion of the tree, lots of little changes all over the place for bugs and new hardware. Other than that, the normal mix of new hardware support and bugfixes. All have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlXWJacACgkQMUfUDdst+ymGCwCePl4ANthHngvzF6VNth0Osrdk T2EAoNiOxTymRKPLiZ9Vs4Qznqq8CH2X =g8e1 -----END PGP SIGNATURE----- Merge tag 'usb-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big USB and PHY patchset for 4.3-rc1. As usual, the majority of the changes are in the USB gadget portion of the tree, lots of little changes all over the place for bugs and new hardware. Other than that, the normal mix of new hardware support and bugfixes. All have been in linux-next with no reported issues" * tag 'usb-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (261 commits) USB: qcserial: add HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module USB: ftdi_sio: Added custom PID for CustomWare products USB: usb_wwan: silence read errors on disconnect USB: option: silence interrupt errors USB: symbolserial: Correct transferred data size USB: symbolserial: Use usb_get_serial_port_data usb: misc: usbtest: format max packet size for iso transfer usb: host: ehci-sys: delete useless bus_to_hcd conversion Revert "usb: interface authorization: Declare authorized attribute" Revert "usb: interface authorization: Introduces the default interface authorization" Revert "usb: interface authorization: Control interface probing and claiming" Revert "usb: interface authorization: Introduces the USB interface authorization" Revert "usb: interface authorization: SysFS part of USB interface authorization" Revert "usb: interface authorization: Documentation part" Revert "usb: interface authorization: Use a flag for the default device authorization" usb: core: hub: Removed some warnings generated by checkpatch.pl USB: host: ohci-at91: merge loops in ohci_hcd_at91_drv_probe USB: host: ohci-at91: merge ohci_at91_of_init in ohci_hcd_at91_drv_probe USB: host: ohci-at91: depend on OF USB: host: ohci-at91: move at91_usbh_data definition in c file ... |
||
|
|
c2078402e4 |
TTY/Serial driver patches for 4.3-rc1
Here is the big tty/serial driver update for 4.3-rc1. Not many major things, a number of driver updates and changes, and the 8250 driver got split up a bit to make it easier to work with by moving some functions to a new file. Full details are in the shortlog. All have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlXV9dQACgkQMUfUDdst+ynbVQCgs3TBU7xHE4Yci6/w0+wo27Ru 6h8An2Fm80ia5aqFrKDl67WdRMgJyEzB =6djD -----END PGP SIGNATURE----- Merge tag 'tty-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big tty/serial driver update for 4.3-rc1. Not many major things, a number of driver updates and changes, and the 8250 driver got split up a bit to make it easier to work with by moving some functions to a new file. Full details are in the shortlog. All have been in linux-next with no reported issues" * tag 'tty-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (90 commits) serial: imx: save and restore context in the suspend path serial: imx: allow waking up on RTSD serial: imx: introduce serial_imx_enable_wakeup() serial: imx: remove unbalanced clk_prepare serial: 8250: move rx_running out of the bitfield tty: serial: 8250_omap: do not use RX DMA if pause is not supported serial:8250_dw: do not alter CTS and DCTS since AFE is enabled tty: serial: men_z135_uart.c: Don't initialize port->lock tty: serial: men_z135_uart.c: Fix race between IRQ and set_termios() serial: 8250: bind to ALi Fast Infrared Controller (ALI5123) serial: 8250: don't bind to SMSC IrCC IR port serial: mxs-auart: fix baud rate range serial: mxs-auart: keep the AUART unit in reset state when not in use serial: mxs-auart: use a function name to reflect what it really does serial: 8250_pci: fix mode after S3/S4 resume for F81504/508/512 sc16is7xx: constify devtype sc16is7xx: support multiple devices sc16is7xx: save and use per-chip line number uart: pl011: Add support to ZTE ZX296702 uart uart: pl011: Improve LCRH register access decision ... |
||
|
|
2f37d65a6a |
Staging driver patches for 4.3-rc1
Here is the big staging driver updates for 4.3-rc1. Lots of things all over the place, almost all of them trivial fixups and changes. The usual IIO updates and new drivers and we have added the MOST driver subsystem which is getting cleaned up in the tree. The ozwpan driver is finally being deleted as it is obviously abandoned and no one cares about it. Full details are in the shortlog, and all of these have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlXV9S8ACgkQMUfUDdst+ykAwQCfSOc+y5AG7+63cIdnLwRS3MdZ p3EAoLoJXl8+5hfIsRBlwXyLEkN33f/7 =dD9z -----END PGP SIGNATURE----- Merge tag 'staging-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the big staging driver updates for 4.3-rc1. Lots of things all over the place, almost all of them trivial fixups and changes. The usual IIO updates and new drivers and we have added the MOST driver subsystem which is getting cleaned up in the tree. The ozwpan driver is finally being deleted as it is obviously abandoned and no one cares about it. Full details are in the shortlog, and all of these have been in linux-next with no reported issues" * tag 'staging-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (912 commits) staging/lustre/o2iblnd: remove references to ib_reg_phsy_mr() staging: wilc1000: fix build warning with setup_timer() staging: wilc1000: remove DECLARE_WILC_BUFFER() staging: wilc1000: remove void function return statements that are not useful staging: wilc1000: coreconfigurator.c: fix kmalloc error check staging: wilc1000: coreconfigurator.c: use kmalloc instead of WILC_MALLOC staging: wilc1000: remove unused codes of gps8ConfigPacket staging: wilc1000: remove unnecessary void pointer cast staging: wilc1000: remove WILC_NEW and WILC_NEW_EX staging: wilc1000: use kmalloc instead of WILC_NEW staging: wilc1000: Process WARN, INFO options of debug levels from user staging: wilc1000: remove unneeded tstrWILC_MsgQueueAttrs typedef staging: wilc1000: delete wilc_osconfig.h staging: wilc1000: delete wilc_log.h staging: wilc1000: delete wilc_timer.h staging: wilc1000: remove WILC_TimerStart() staging: wilc1000: remove WILC_TimerCreate() staging: wilc1000: remove WILC_TimerDestroy() staging: wilc1000: remove WILC_TimerStop() staging: wilc1000: remove tstrWILC_TimerAttrs typedef ... |
||
|
|
1af115d675 |
Driver core patches for 4.3-rc1
Here is the new patches for the driver core / sysfs for 4.3-rc1. Very small number of changes here, all the details are in the shortlog, nothing major happening at all this kernel release, which is nice to see. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlXV9EwACgkQMUfUDdst+ylv1ACgj7srYyvumehX1zfRVzEWNuez chQAoKHnSpDMME/WmhQQRxzQ5pfd1Pni =uGHg -----END PGP SIGNATURE----- Merge tag 'driver-core-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the new patches for the driver core / sysfs for 4.3-rc1. Very small number of changes here, all the details are in the shortlog, nothing major happening at all this kernel release, which is nice to see" * tag 'driver-core-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: bus: subsys: update return type of ->remove_dev() to void driver core: correct device's shutdown order driver core: fix docbook for device_private.device selftests: firmware: skip timeout checks for kernels without user mode helper kernel, cpu: Remove bogus __ref annotations cpu: Remove bogus __ref annotation of cpu_subsys_online() firmware: fix wrong memory deallocation in fw_add_devm_name() sysfs.txt: update show method notes about sprintf/snprintf/scnprintf usage devres: fix devres_get() |
||
|
|
1c00038c76 |
Char/Misc driver patches for 4.3-rc1
Here's the "big" char/misc driver update for 4.3-rc1. Not much really interesting here, just a number of little changes all over the place, and some nice consolidation of the nvmem drivers to a common framework. As usual, the mei drivers stand out as the largest "churn" to handle new devices and features in their hardware. All have been in linux-next for a while with no issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlXV844ACgkQMUfUDdst+ymYfQCgmDKjq3fsVHCxNZPxnukFYzvb xZkAnRb8fuub5gVQFP29A+rhyiuWD13v =Bq9K -----END PGP SIGNATURE----- Merge tag 'char-misc-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver patches from Greg KH: "Here's the "big" char/misc driver update for 4.3-rc1. Not much really interesting here, just a number of little changes all over the place, and some nice consolidation of the nvmem drivers to a common framework. As usual, the mei drivers stand out as the largest "churn" to handle new devices and features in their hardware. All have been in linux-next for a while with no issues" * tag 'char-misc-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (136 commits) auxdisplay: ks0108: initialize local parport variable extcon: palmas: Fix build break due to devm_gpiod_get_optional API change extcon: palmas: Support GPIO based USB ID detection extcon: Fix signedness bugs about break error handling extcon: Drop owner assignment from i2c_driver extcon: arizona: Simplify pdata symantics for micd_dbtime extcon: arizona: Declare 3-pole jack if we detect open circuit on mic extcon: Add exception handling to prevent the NULL pointer access extcon: arizona: Ensure variables are set for headphone detection extcon: arizona: Use gpiod inteface to handle micd_pol_gpio gpio extcon: arizona: Add basic microphone detection DT/ACPI bindings extcon: arizona: Update to use the new device properties API extcon: palmas: Remove the mutually_exclusive array extcon: Remove optional print_state() function pointer of struct extcon_dev extcon: Remove duplicate header file in extcon.h extcon: max77843: Clear IRQ bits state before request IRQ toshiba laptop: replace ioremap_cache with ioremap misc: eeprom: max6875: clean up max6875_read() misc: eeprom: clean up eeprom_read() misc: eeprom: 93xx46: clean up eeprom_93xx46_bin_read/write ... |