35548 Commits

Author	SHA1	Message	Date
Linus Torvalds	6f9baa9b92	More power management updates for 6.13-rc1 ... - Add virtual cpufreq driver for guest kernels (David Dai). - Minor cleanup to various cpufreq drivers (Andy Shevchenko, Dhruva Gole, Jie Zhan, Jinjie Ruan, Shuosheng Huang, Sibi Sankar, and Yuan Can). - Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check" (Colin Ian King). - Improve DT bindings for qcom-hw driver (Dmitry Baryshkov, Konrad Dybcio, and Nikunj Kela). - Make cpuidle_play_dead() try all idle states with :enter_dead() callbacks and change their return type to void (Rafael Wysocki). -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmdA6AcSHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRxSnEP/AkRFAczWdQNqOEw3H7VPZJwqnN6BIpw 0ewhxx5QHP5TfQ/u/VXxgcja0nuTDVIDJSjvnypyxKJnZa5+sl0Kj9ieaIBlPKAl m0UmiqT4mbw4mEIBse/6pZR6DCHOYNfmYTo6BdA1JDfVPM9fEmmicKmk1NW5BEt3 FOPPZpGACzlMxiFHLhEoDsMJZKGdGZQsu5mLhkHW3pmMVU8+pgKiypO0yVVl535l vcgvrXjBRgHVdoUi99zK3ORW3n9O/UADvampEV0e4pxpTNd0kC3U3igaOAT+S/EI 1wGOxC7WAlMJju+5aUX8qEwg19kalg8ecU49ahhE9o/dRN9lOzLYm4xurpcVWJLH pH88XJMTZGHAgfLWD+isR4NRnIYVxdG+K85YpWd560xD1Be+oJXAlrg1PcR2PLea CcvyH8a4fGqnpvLxx3teYFYZElXSFkARxEXrfDx0KLDsy+q7DGaoiAOf+AonXipP 8HjhuLdh2jUPqWwdZR+4Td3HMh6sS0soLGHiURA+lGVS5ucek8ZLnbNoQGS+9NAU u64QwAqH9kiW4VxLUC17ErfZLMBU1jj+C79LaMRUoc5wfv6WU9oOZ6Xg9JcGZUGV cEsCQqtir9o0snRXHdQv5QTij8IFqTr2iNV8vZ0cmCp8UxSMN8/41p016BZ+Ahd/ yb7PJ7hHZGm6 =aB0d -----END PGP SIGNATURE----- Merge tag 'pm-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These mostly are updates of cpufreq drivers used on ARM platforms plus one new DT-based cpufreq driver for virtualized guests and two cpuidle changes that should not make any difference on systems currently in the field, but will be needed for future development: - Add virtual cpufreq driver for guest kernels (David Dai) - Minor cleanup to various cpufreq drivers (Andy Shevchenko, Dhruva Gole, Jie Zhan, Jinjie Ruan, Shuosheng Huang, Sibi Sankar, and Yuan Can) - Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check" (Colin Ian King) - Improve DT bindings for qcom-hw driver (Dmitry Baryshkov, Konrad Dybcio, and Nikunj Kela) - Make cpuidle_play_dead() try all idle states with :enter_dead() callbacks and change their return type to void (Rafael Wysocki)" * tag 'pm-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits) cpuidle: Change :enter_dead() driver callback return type to void cpuidle: Do not return from cpuidle_play_dead() on callback failures arm64: dts: qcom: sc8180x: Add a SoC-specific compatible to cpufreq-hw dt-bindings: cpufreq: cpufreq-qcom-hw: Add SC8180X compatible cpufreq: sun50i: add a100 cpufreq support cpufreq: mediatek-hw: Fix wrong return value in mtk_cpufreq_get_cpu_power() cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_power() cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_cost() cpufreq: loongson3: Check for error code from devm_mutex_init() call cpufreq: scmi: Fix cleanup path when boost enablement fails cpufreq: CPPC: Fix possible null-ptr-deref for cppc_get_cpu_cost() cpufreq: CPPC: Fix possible null-ptr-deref for cpufreq_cpu_get_raw() Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check" dt-bindings: cpufreq: cpufreq-qcom-hw: Add SAR2130P compatible cpufreq: add virtual-cpufreq driver dt-bindings: cpufreq: add virtual cpufreq device cpufreq: loongson2: Unregister platform_driver on failure cpufreq: ti-cpufreq: Remove revision offsets in AM62 family cpufreq: ti-cpufreq: Allow backward compatibility for efuse syscon cppc_cpufreq: Remove HiSilicon CPPC workaround ...	2024-11-22 19:29:48 -08:00
Linus Torvalds	9f3a2ba62c	The core framework gained a clk provider helper, a clk consumer helper, and ... some unit tests for the assigned clk rates feature in DeviceTree. On the vendor driver side, we gained a whole pile of SoC driver support detailed below. The majority in the diffstat is Qualcomm, but there's also quite a few Samsung and Mediatek clk driver additions in here as well. The top vendors is quite common, but the sheer amount of new drivers is uncommon, so I'm anticipating a larger number of fixes for clk drivers this cycle. Core: - devm_clk_bulk_get_all_enabled() to return number of clks acquired - devm_clk_hw_register_gate_parent_hw() helper to modernize drivers - KUnit tests for clk-assigned-rates{,-u64} New Drivers: - Marvell PXA1908 SoC clks - Mobileye EyeQ5, EyeQ6L and EyeQ6H clk driver - TWL6030 clk driver - Nuvoton Arbel BMC NPCM8XX SoC clks - MediaTek MT6735 SoC clks - MediaTek MT7620, MT7628 and MT7688 MMC clks - Add a driver for gated fixed rate clocks - Global clock controllers for Qualcomm QCS8300 and IPQ5424 SoCs - Camera, display and video clock controllers for Qualcomm SA8775P SoCs - Global, display, GPU, TCSR, and RPMh clock controllers for Qualcomm SAR2130P - Global, camera, display, GPU, and video clock controllers for Qualcomm SM8475 SoCs - RTC power domain and Battery Backup Function (VBATTB) clock support for the Renesas RZ/G3S SoC - Qualcomm IPQ9574 alpha PLLs - Support for i.MX91 CCM in the i.MX93 driver - Microchip LAN969X SoC clks - Cortex-A55 core clocks and Interrupt Control Unit (ICU) clock and reset on Renesas RZ/V2H(P) - Samsung ExynosAutov920 clk drivers for PERIC1, MISC, HSI0 and HSI1 - Samsung Exynos8895 clk drivers for FSYS0/1, PERIC0/1, PERIS and TOP Updates: - Convert more clk bindings to YAML - Various clk driver cleanups: NULL checks, add const, etc. - Remove END/NUM #defines that count number of clks in various binding headers - Continue moving reset drivers to drivers/reset via auxiliary bus -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmc/r1kRHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSUlaw/+NkmTMPSpgKy8NfZi6KoCk3U5llaknXvj Y/Y2pB7UpOFDTsSCKRcFrZ6JWS6GIogE70W9w+zxIht4QA4Ekd9vKT7VRhMl+8t/ pz2i0c0Pm24hSye9LKM7JCVIVL8SNYonOs3wC1sfMVMDoUikVwupj6Bmj0nAYrBo hbJFBXtn/LbyYImJQ9hYqHnUtJKGp/N7hhpGu6kT/lbzcaWsBMp4lhH+s20DJz5e kdJVJGaLOELerAG/SHIxh9obtfznvex6x3itTB0o/d6/1DSDjjlxnZH8YV8eQWk0 kK+ORuewA+qCi3RiPReHCPBIfPI4HL0z3k5JFA5eI7eD4VZIis+YBOa/Y8bQR9bG wDg5qh5su0fdeWBUvkFB03igNoMdtH68iYd2q3YE0ka95FGulcyvbqoyxTJnjIxW 328PizYZV8LQ4+LGSdIFyp9f/SrjF0pAt7yTF8Dis3jq3ul/6ELX9G6OCNgtGKQz p0Hb01fKC4s7w48QI5OXQKfS382vS8G8a2NIwt2xxorc4+Dr2rjPvlDhErshCOAT nDEerIjGWr/0rQeTGxg+SLUx5ytq2aBkysg95/9WVe3b8kZeePiW9gEH4tgealY8 eHzFvbqXutlKer0xLOYiLd3hOeHhkCJNj48QS8jVXtRGGeLjZONw5F1mjTNskPpx 9jbKMcDjGyc= =FqLm -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The core framework gained a clk provider helper, a clk consumer helper, and some unit tests for the assigned clk rates feature in DeviceTree. On the vendor driver side, we gained a whole pile of SoC driver support detailed below. The majority in the diffstat is Qualcomm, but there's also quite a few Samsung and Mediatek clk driver additions in here as well. The top vendors is quite common, but the sheer amount of new drivers is uncommon, so I'm anticipating a larger number of fixes for clk drivers this cycle. Core: - devm_clk_bulk_get_all_enabled() to return number of clks acquired - devm_clk_hw_register_gate_parent_hw() helper to modernize drivers - KUnit tests for clk-assigned-rates{,-u64} New Drivers: - Marvell PXA1908 SoC clks - Mobileye EyeQ5, EyeQ6L and EyeQ6H clk driver - TWL6030 clk driver - Nuvoton Arbel BMC NPCM8XX SoC clks - MediaTek MT6735 SoC clks - MediaTek MT7620, MT7628 and MT7688 MMC clks - Add a driver for gated fixed rate clocks - Global clock controllers for Qualcomm QCS8300 and IPQ5424 SoCs - Camera, display and video clock controllers for Qualcomm SA8775P SoCs - Global, display, GPU, TCSR, and RPMh clock controllers for Qualcomm SAR2130P - Global, camera, display, GPU, and video clock controllers for Qualcomm SM8475 SoCs - RTC power domain and Battery Backup Function (VBATTB) clock support for the Renesas RZ/G3S SoC - Qualcomm IPQ9574 alpha PLLs - Support for i.MX91 CCM in the i.MX93 driver - Microchip LAN969X SoC clks - Cortex-A55 core clocks and Interrupt Control Unit (ICU) clock and reset on Renesas RZ/V2H(P) - Samsung ExynosAutov920 clk drivers for PERIC1, MISC, HSI0 and HSI1 - Samsung Exynos8895 clk drivers for FSYS0/1, PERIC0/1, PERIS and TOP Updates: - Convert more clk bindings to YAML - Various clk driver cleanups: NULL checks, add const, etc. - Remove END/NUM #defines that count number of clks in various binding headers - Continue moving reset drivers to drivers/reset via auxiliary bus" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (162 commits) clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access clk: Fix invalid execution of clk_set_rate clk: clk-loongson2: Fix memory corruption bug in struct loongson2_clk_provider clk: lan966x: make it selectable for ARCH_LAN969X clk: eyeq: add EyeQ6H west fixed factor clocks clk: eyeq: add EyeQ6H central fixed factor clocks clk: eyeq: add EyeQ5 fixed factor clocks clk: eyeq: add fixed factor clocks infrastructure clk: eyeq: require clock index with phandle in all cases clk: fixed-factor: add clk_hw_register_fixed_factor_index() function dt-bindings: clock: eyeq: add more Mobileye EyeQ5/EyeQ6H clocks dt-bindings: soc: mobileye: set `#clock-cells = <1>` for all compatibles clk: clk-axi-clkgen: make sure to enable the AXI bus clock dt-bindings: clock: axi-clkgen: include AXI clk clk: mmp: Add Marvell PXA1908 MPMU driver clk: mmp: Add Marvell PXA1908 APMU driver clk: mmp: Add Marvell PXA1908 APBCP driver clk: mmp: Add Marvell PXA1908 APBC driver dt-bindings: clock: Add Marvell PXA1908 clock bindings clk: mmp: Switch to use struct u32_fract instead of custom one ...	2024-11-22 17:02:25 -08:00
Linus Torvalds	2fb7eb3d7e	- Improved handling of LCD power states and interactions with the fbdev subsystem. ... - Introduced new LCD_POWER_ constants to decouple the LCD subsystem from fbdev. - Several drivers were updated to use the new LCD_POWER_ constants. - Clarified the semantics of the lcd_ops.controls_device callback. - Removed unnecessary includes and dependencies. - Removed unused notifier functionality. - Simplified code with scoped for-each loops. - Fixed module autoloading for the ktz8866 driver. - Updated device tree bindings to yaml format. - Minor cleanups and improvements in various drivers. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmc/KTkACgkQUa+KL4f8 d2HzWA//QtnboEtMOOt5hlY/MyGnwDG2nWWwbnlEVQ1zN3lQut4WWOocuyqIu6Wr tfRyLKOsiAWdjFi7NBQlV3ylNyyD4XU9/qNduOAMPe3VGj/lZB70coH+RL4L4JvX cSiue8vF9StX7gB7qxh1uVBastlCu9ofVZV4dFMD4hX+hA3SgBX5itmOfue9AMkm LXdA1DeDvigH5DMPIStHuQS0HVOxv06TJd1syzVBesa8G3raTwluTc16uPJkIwHd MnDqdvevaiW1ZnE3+8o2CmkLfFsB27iltwutXn9MbrUKBz0S7/ruNTib+RguFOaP Eo+ls0KIaiPH4xi0FuHlSiXKwszIvZ3GGeu3fO66k9m+vM2/IesBGgf0GR3Y8Lxr fwl4iNkLguKsBnLHBxhDnrQ3ltQiBw4q8Q2m/zQ4OoaW/sMX+514D3jOZmx3snE1 ODE22bhoznRLyEAHisv4wA9snoAyvEItejczGC7HLJ0SbWUGBbqzHgvhjwMkh6R6 0+6dJ22DTlSwZsyXcSkzA85ayiuxFLhwvD0nfxyGwUD//swg8L7ymnpVLOqpdJcc EgdVQeuaTij0UH9NutMDoIC1Z0SUMvpli1Wk0/Y1Hmg0vICZUUjewcli6VEbZGFu PKkkAeTPJaxfYWW64VHk6flSaW67VjqfiQ01F4oLlRwONcihpxM= =9n4l -----END PGP SIGNATURE----- Merge tag 'backlight-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: - Improve handling of LCD power states and interactions with the fbdev subsystem - Introduce new LCD_POWER_ constants to decouple the LCD subsystem from fbdev - Update several drivers to use the new LCD_POWER_ constants - Clarify the semantics of the lcd_ops.controls_device callback - Remove unnecessary includes and dependencies - Remove unused notifier functionality - Simplify code with scoped for-each loops - Fix module autoloading for the ktz8866 driver - Update device tree bindings to yaml format - Minor cleanups and improvements in various drivers * tag 'backlight-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (33 commits) MAINTAINERS: Use Daniel Thompson's korg address for Backlight work dt-bindings: backlight: Convert zii,rave-sp-backlight.txt to yaml backlight: Remove notifier backlight: ktz8866: Fix module autoloading backlight: 88pm860x_bl: Simplify with scoped for each OF child loop backlight: lcd: Do not include <linux/fb.h> in lcd header backlight: lcd: Remove struct fb_videomode from set_mode callback backlight: lcd: Replace check_fb with controls_device HID: picoLCD: Replace check_fb in favor of struct fb_info.lcd_dev fbdev: omap: Use lcd power constants fbdev: imxfb: Use lcd power constants fbdev: imxfb: Replace check_fb in favor of struct fb_info.lcd_dev fbdev: clps711x-fb: Use lcd power constants fbdev: clps711x-fb: Replace check_fb in favor of struct fb_info.lcd_dev backlight: tdo24m: Use lcd power constants backlight: platform_lcd: Use lcd power constants backlight: platform_lcd: Remove match_fb from struct plat_lcd_data backlight: platform_lcd: Remove include statement for <linux/backlight.h> backlight: otm3225a: Use lcd power constants backlight: ltv350qv: Use lcd power constants ...	2024-11-22 16:29:57 -08:00
Linus Torvalds	93251bdf7a	- Removed unused local header files from various drivers. ... - Reverted platform driver removal to the original method for consistency. - Introduced ordered workqueues for LED events, replacing the less efficient system_wq. - Switched to a safer iteration macro in several drivers to prevent potential memory leaks. - Fixed a refcounting bug in the mt6360 flash LED driver. - Fixed an uninitialized variable in the mt6370_mc_pattern_clear() function. - Resolved Smatch warnings in the leds-bcm6328 driver. - Addressed a potential NULL pointer dereference in the brightness_show() function. - Fixed an incorrect format specifier in the ss4200 driver. - Prevented a resource leak in the max5970 driver's probe function. - Added support for specifying the number of serial shift bits in the device tree for the BCM63138 family. - Implemented multicolor brightness control in the lp5562 driver. - Added a device tree property to override the default LED pin polarity. - Added a property to specify the default brightness value when the LED is initially on. - Set missing timing properties for the ktd2692 driver. - Documented the "rc-feedback" trigger for controlling LEDs based on remote control activity. - Converted text bindings to YAML for the pca955x driver to enable device tree validation. - Removed redundant checks for invalid channel numbers in the lp55xx driver. - Updated the MAINTAINERS file with current contact information. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmc/KSgACgkQUa+KL4f8 d2HvLRAAsTuxvq89Ooe5eVWTY39fADykEx8sLgKTJWBs+A4EkD6a6DZAU0QQKZeX o7ERtasl5E0WFXF2BaVYPWNDjcSFlqG3AB5PbQLpzUUEkllJWEaWz5ZthpTMct5n Q/ylbTA8dYS+bw3bztTKWRWX8RMXKSHdjymJoSuoFLY7T1MLqNHZbu+whNKfC++h UMMXyx2M9B+3/0cDghy1EvCWkBTVOL9GzhQhAc+guQTCA8VeK+7LilnCtDOwymdO lScTM87S5gD6n22tcDFHhHH+qXVG8LfNpRRKiZdv6BmFJwHpXD+nAMReJOmyReDp jepy1aX/W/1cw/GMzd/nOMx/8u8rbO5Up9euCS/jFvgSpn9bKYIlMy2CVsAznOGN elt/kCD3nIxY8pzMTnvxCEVYj+hfbCKQWq51cm6G5hhQbfVw72fwiVIGTy8fadO3 kLOiWM3EKvtpjbdMl0BzWVOIPLO0gQOeYH7ZYb7TM0g3mtFo47DhoGHYQCiaGgko Bpb+4fcXpeFLTutM5HGvqqfOCnl/uk4Gf3KhdECSmjFb3L0JbWE/JN3CMq+AR7oK FcOhYhNVEGu7VILQYScmChz/DzJT267lyLKF7y1jkmz5ZKMD2r+8XZ2xEb5ks6PG +gU7lMY2OXWs/lB9rGTRfCkS50DFJfNG2F5oN7fZ5UJLMWL1EY8= =qZhx -----END PGP SIGNATURE----- Merge tag 'leds-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds PULL LED updates from Lee Jones: - Remove unused local header files from various drivers - Revert platform driver removal to the original method for consistency - Introduce ordered workqueues for LED events, replacing the less efficient system_wq - Switch to a safer iteration macro in several drivers to prevent potential memory leaks - Fix a refcounting bug in the mt6360 flash LED driver - Fix an uninitialized variable in the mt6370_mc_pattern_clear() function - Resolve Smatch warnings in the leds-bcm6328 driver - Address a potential NULL pointer dereference in the brightness_show() function - Fix an incorrect format specifier in the ss4200 driver - Prevent a resource leak in the max5970 driver's probe function - Add support for specifying the number of serial shift bits in the device tree for the BCM63138 family - Implement multicolor brightness control in the lp5562 driver - Add a device tree property to override the default LED pin polarity - Add a property to specify the default brightness value when the LED is initially on - Set missing timing properties for the ktd2692 driver - Document the "rc-feedback" trigger for controlling LEDs based on remote control activity - Convert text bindings to YAML for the pca955x driver to enable device tree validation - Remove redundant checks for invalid channel numbers in the lp55xx driver - Update the MAINTAINERS file with current contact information * tag 'leds-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (46 commits) leds: ss4200: Fix the wrong format specifier for 'blinking' leds: pwm: Add optional DT property default-brightness dt-bindings: leds: pwm: Add default-brightness property leds: class: Protect brightness_show() with led_cdev->led_access mutex leds: ktd2692: Set missing timing properties leds: max5970: Fix unreleased fwnode_handle in probe function leds: Introduce ordered workqueue for LEDs events instead of system_wq MAINTAINERS: Replace Siemens IPC related bouncing maintainers leds: bcm6328: Replace divide condition with comparison for shift value leds: lp55xx: Remove redundant test for invalid channel number dt-bindings: leds: pca955x: Convert text bindings to YAML leds: rgb: leds-mt6370-rgb: Fix uninitialized variable 'ret' in mt6370_mc_pattern_clear leds: lp5562: Add multicolor brightness control dt-bindings: leds: Add 'active-high' property leds: Switch back to struct platform_driver::remove() leds: bcm63138: Add some register defines leds: bcm63138: Handle shift register config leds: bcm63138: Use scopes and guards dt-bindings: leds: bcm63138: Add shift register bits leds: leds-gpio-register: Reorganize kerneldoc parameter names ...	2024-11-22 16:25:20 -08:00
Linus Torvalds	80739fd00c	- Several drivers, including atmel-flexcom/rk8xx-core, palmas, and ... tps65010, have undergone minor code improvements to enhance consistency and fix race conditions. - The syscon driver now utilizes the regmap max_register_is_0 capability for consistent register map configuration across syscons of all sizes. - New device support has been added for QCS8300, qcs615, SA8255p, and samsung,s2dos05, expanding the range of compatible hardware. - The cros_ec driver now supports loading cros_ec_ucsi on supported ECs and avoids loading the charger with UCSI, streamlining functionality. - The bd96801 driver now utilizes the more modern maple tree register cache, improving performance. - The da9052-spi driver has undergone a fix to change the read-mask to write-mask, preventing potential issues. - Unused declarations in max77693 have been removed, and support for samsung,s2dos05 has been added, enhancing code clarity and device compatibility. - Error handling in cs42l43 has been fixed to avoid unbalanced regulator put and ensure proper synchronization during driver removal. - The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of MODULE_ALIAS(), improving code consistency. - Documentation for qcom,tcsr, syscon, and atmel-smc has been updated and reorganized for better clarity and maintainability. - The intel_soc_pmic_bxtwc driver has undergone significant improvements, including the use of IRQ domains for various devices, fixing IRQ domain names duplication, and code refactoring for better consistency and maintainability. - The ipaq-micro driver has received a fix for a missing break statement in the default case, enhancing code robustness. - Support for the AXP323 PMIC has been added to the axp20x driver, along with ensuring a clear relationship between IDs and model names, and allowing multiple regulators, broadening hardware compatibility. - The cs42l43 driver now disables IRQs during suspend for improved power management. - The adp5585 driver has reduced its dependencies by dropping the obsolete dependency on COMPILE_TEST. - Initial support for the MT6328 PMIC has been added to the mt6397 driver, expanding the range of supported hardware. - The rtc-bd70528 driver has been simplified by dropping the IC name from IRQ, improving code readability. - Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been updated to enhance clarity and incorporate new features. - The rt5033 driver has received a fix for a missing regmap_del_irq_chip() in the error handling path. - New device support has been added for MSM8917, and the intel_soc_pmic_crc driver now supports non-ACPI instantiated i2c_client. - The 88pm886 driver has added support for the RTC cell, and the tqmx86 driver has improved its GPIO IRQ setup and added I2C IRQ support, increasing functionality. - The sprd,sc2731 DT schema has been updated and converted to YAML format for better readability and maintainability. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmc/KQQACgkQUa+KL4f8 d2E0Gg//blIYrtUgGy5xEwR8WIobYtAxBo+AMX1tSgh4Hs4u/SFhy4cE7no+M3J2 Id5gQJscuz3k4sH0raoUMp2NRFyI8lD8Y9xRBTDE+KV/FbdL1KHfmTun2NY1zG7U LIop39HsJkJ0Z06lnyBf61QK6SmlzT8vXbJmK4mYf8wgBX7iFDZ0FMZHP2uW5k/Z UV8nyQalwerG+jOGXfQkVDXF8YKToqPtqsFWTJ1Yn5gs1SCd6dyusDNYqUDuW4Ng dbu/4wt3mspliTOnBTPnXlcVsCNefhtbCWxyBpaA3luK9ciMdX7cZ8wei1xkFcwK 5bXPjXsFiiUbDX0l/6eS1h676k1JQl5iABlhGXHJm/GMcN9fdNFCQL/2rtJ4iSfW 0CoYjERfm6OyHF0Wiuk3I8x/AARWKXtDEjktGXUL0do7NBqJgB3ISme8x8b5hW4l HO6MmsFmHxHbIlb+kCTTCtXa5R1Sdca/8qrPxMb+B89X3eOtF7sjVgS9dwkLNCGp hqP0K2IGNaRw+EDlXCBaWrbq7x0kpup6o+nooViU0Pj9fFjEdZlCLyu22+kjl04V Lfe3x9wMXBrHVrPynoaQp6+57QlWfpM0uuKJWoaKlCoJTh8UbFcWWkDqr6I/pDur EtfSwOO8uVuS8m/FMAs0m/+zrWfHAvjAbAHFCKBu/vKaD5DvxeI= =YP3r -----END PGP SIGNATURE----- Merge tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: - Several drivers, including atmel-flexcom/rk8xx-core, palmas, and tps65010, have undergone minor code improvements to enhance consistency and fix race conditions. - The syscon driver now utilizes the regmap max_register_is_0 capability for consistent register map configuration across syscons of all sizes. - New device support has been added for QCS8300, qcs615, SA8255p, and samsung,s2dos05, expanding the range of compatible hardware. - The cros_ec driver now supports loading cros_ec_ucsi on supported ECs and avoids loading the charger with UCSI, streamlining functionality. - The bd96801 driver now utilizes the more modern maple tree register cache, improving performance. - The da9052-spi driver has undergone a fix to change the read-mask to write-mask, preventing potential issues. - Unused declarations in max77693 have been removed, and support for samsung,s2dos05 has been added, enhancing code clarity and device compatibility. - Error handling in cs42l43 has been fixed to avoid unbalanced regulator put and ensure proper synchronization during driver removal. - The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of MODULE_ALIAS(), improving code consistency. - Documentation for qcom,tcsr, syscon, and atmel-smc has been updated and reorganized for better clarity and maintainability. - The intel_soc_pmic_bxtwc driver has undergone significant improvements, including the use of IRQ domains for various devices, fixing IRQ domain names duplication, and code refactoring for better consistency and maintainability. - The ipaq-micro driver has received a fix for a missing break statement in the default case, enhancing code robustness. - Support for the AXP323 PMIC has been added to the axp20x driver, along with ensuring a clear relationship between IDs and model names, and allowing multiple regulators, broadening hardware compatibility. - The cs42l43 driver now disables IRQs during suspend for improved power management. - The adp5585 driver has reduced its dependencies by dropping the obsolete dependency on COMPILE_TEST. - Initial support for the MT6328 PMIC has been added to the mt6397 driver, expanding the range of supported hardware. - The rtc-bd70528 driver has been simplified by dropping the IC name from IRQ, improving code readability. - Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been updated to enhance clarity and incorporate new features. - The rt5033 driver has received a fix for a missing regmap_del_irq_chip() in the error handling path. - New device support has been added for MSM8917, and the intel_soc_pmic_crc driver now supports non-ACPI instantiated i2c_client. - The 88pm886 driver has added support for the RTC cell, and the tqmx86 driver has improved its GPIO IRQ setup and added I2C IRQ support, increasing functionality. - The sprd,sc2731 DT schema has been updated and converted to YAML format for better readability and maintainability. * tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (62 commits) dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm dt-bindings: mfd: sprd,sc2731: Convert to YAML mfd: tqmx86: Add I2C IRQ support mfd: tqmx86: Make IRQ setup errors non-fatal mfd: tqmx86: Refactor GPIO IRQ setup mfd: tqmx86: Improve gpio_irq module parameter description mfd: tqmx86: Add board definitions for TQMx120UC, TQMx130UC and TQMxE41S mfd: 88pm886: Add the RTC cell dt-bindings: mfd: Add Realtek RTL9300 switch peripherals mfd: intel_soc_pmic_crc: Add support for non ACPI instantiated i2c_client mfd: intel_soc_pmic_*: Consistently use filename as driver name dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917 mfd: rt5033: Fix missing regmap_del_irq_chip() mfd: cgbc-core: Fix error handling paths in cgbc_init_device() dt-bindings: mfd: aspeed: Support for AST2700 mfd: Switch back to struct platform_driver::remove() dt-bindings: mfd: qcom,spmi-pmic: Document PMICs added in SM8750 mfd: rtc: bd7xxxx Drop IC name from IRQ mfd: mt6397: Add initial support for MT6328 mfd: adp5585: Drop obsolete dependency on COMPILE_TEST ...	2024-11-22 16:19:47 -08:00
Linus Torvalds	28eb75e178	drm for 6.13-rc1 ... core: - split DSC helpers from DP helpers - clang build fixes for drm/mm test - drop simple pipeline support for gem vram - document submission error signaling - move drm_rect to drm core module from kms helper - add default client setup to most drivers - move to video aperture helpers instead of drm ones tests: - new framebuffer tests ttm: - remove swapped and pinned BOs from TTM lru panic: - fix uninit spinlock - add ABGR2101010 support bridge: - add TI TDP158 support - use standard PM OPS dma-fence: - use read_trylock instead of read_lock to help lockdep scheduler: - add errno to sched start to report different errors - add locking to drm_sched_entity_modify_sched - improve documentation xe: - add drm_line_printer - lots of refactoring - Enable Xe2 + PES disaggregation - add new ARL PCI ID - SRIOV development work - fix exec unnecessary implicit fence - define and parse OA sync props - forcewake refactoring i915: - Enable BMG/LNL ultra joiner - Enable 10bpx + CCS scanout on ICL+, fp16/CCS on TGL+ - use DSB for plane/color mgmt - Arrow lake PCI IDs - lots of i915/xe display refactoring - enable PXP GuC autoteardown - Pantherlake (PTL) Xe3 LPD display enablement - Allow fastset HDR infoframe changes - write DP source OUI for non-eDP sinks - share PCI IDs between i915 and xe amdgpu: - SDMA queue reset support - SMU 13.0.6, JPEG 4.0.3 updates - Initial runtime repartitioning support - rework IP structs for multiple IP instances - Fetch EDID from _DDC if available - SMU13 zero rpm user control - lots of fixes/cleanups amdkfd: - Increase event FIFO size - add topology cap flag for per queue reset msm: - DPU: - SA8775P support - (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996 support - Enable large framebuffer support - Drop MSM8998 and SDM845 - DP: - SA8775P support - GPU: - a7xx preemption support - Adreno A663 support ast: - warn about unsupported TX chips ivpu: - add coredump - add pantherlake support rockchip: - 4K@60Hz display enablement - generate pll programming tables panthor: - add timestamp query API - add realtime group priority - add fdinfo support etnaviv: - improve handling of DMA address limits - improve GPU hangcheck exynos: - Decon Exynos7870 support mediatek: - add OF graph support omap: - locking fixes bochs: - convert to gem/shmem from simpledrm v3d: - support big/super pages - add gemfs vc4: - BCM2712 support refactoring - add YUV444 format support udmabuf: - folio related fixes nouveau: - add panic support on nv50+ -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmc+efwACgkQDHTzWXnE hr6Dyg/9HVVI3lxuWAz9MEt3w+BON5KTJAxg5Zhvc5DwiUbDXghu8sfkUfanDWS5 /MqyPqLt5srXrtKTRDnzEI0Vf8YHeiDEcaydjpshEpCfteHZ7SADpvem8fp6/otV iYt8U6tMcGe9I+M2kwDkOTrKJIiyCKPi5hfBIAkxEAh6806ifPRtLkeMGbaSwBxH x6kZTE9ygGWAY7bAgbmVmm3JwrXG9mYDl9dW3cbi9gZ6PGAXHPZRUPvZoHhvfC2A UVgROH76Spm4rdWYGI3azj+gW3HsdGgUHcysb+lu37i261E+sT7kuV2UYtnOMzr5 igO1RlQ+rcfPYLG4n+oNXDMu5d1OQXELrlQzXptym4Konpd7b/GSeVctWV0wHWuv nG8g7DWAFFnLAdeWqLZpf1Brze33h5+572D3BioWB4LYSEATjwoTwcBKsdRuc4Wk RHxjumCidybTdo/8EB1ElGlH39m/mDQA0scMlVhS/BuiIssfgcBRfltI8S3HzHcW YQYq6xH7F9E3shs3/TYbWR4clm66ZTnZV6ClDfGJolzyF/hbV0rsbeSpDelpooE8 1Js7KuwVa+HvA4jtupY9vqxMTdXWwoGPfuUgKpOAreYibnd1T9Q1zVme/B1bUH05 518IjiMGCxDnBvFWaPT9DcX4zg7pS3yzjw3hGkdz3reUqat0Gy8= =8cUI -----END PGP SIGNATURE----- Merge tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernel Pull drm updates from Dave Airlie: "There's a lot of rework, the panic helper support is being added to more drivers, v3d gets support for HW superpages, scheduler documentation, drm client and video aperture reworks, some new MAINTAINERS added, amdgpu has the usual lots of IP refactors, Intel has some Pantherlake enablement and xe is getting some SRIOV bits, but just lots of stuff everywhere. core: - split DSC helpers from DP helpers - clang build fixes for drm/mm test - drop simple pipeline support for gem vram - document submission error signaling - move drm_rect to drm core module from kms helper - add default client setup to most drivers - move to video aperture helpers instead of drm ones tests: - new framebuffer tests ttm: - remove swapped and pinned BOs from TTM lru panic: - fix uninit spinlock - add ABGR2101010 support bridge: - add TI TDP158 support - use standard PM OPS dma-fence: - use read_trylock instead of read_lock to help lockdep scheduler: - add errno to sched start to report different errors - add locking to drm_sched_entity_modify_sched - improve documentation xe: - add drm_line_printer - lots of refactoring - Enable Xe2 + PES disaggregation - add new ARL PCI ID - SRIOV development work - fix exec unnecessary implicit fence - define and parse OA sync props - forcewake refactoring i915: - Enable BMG/LNL ultra joiner - Enable 10bpx + CCS scanout on ICL+, fp16/CCS on TGL+ - use DSB for plane/color mgmt - Arrow lake PCI IDs - lots of i915/xe display refactoring - enable PXP GuC autoteardown - Pantherlake (PTL) Xe3 LPD display enablement - Allow fastset HDR infoframe changes - write DP source OUI for non-eDP sinks - share PCI IDs between i915 and xe amdgpu: - SDMA queue reset support - SMU 13.0.6, JPEG 4.0.3 updates - Initial runtime repartitioning support - rework IP structs for multiple IP instances - Fetch EDID from _DDC if available - SMU13 zero rpm user control - lots of fixes/cleanups amdkfd: - Increase event FIFO size - add topology cap flag for per queue reset msm: - DPU: - SA8775P support - (disabled by default) MSM8917, MSM8937, MSM8953 and MSM8996 support - Enable large framebuffer support - Drop MSM8998 and SDM845 - DP: - SA8775P support - GPU: - a7xx preemption support - Adreno A663 support ast: - warn about unsupported TX chips ivpu: - add coredump - add pantherlake support rockchip: - 4K@60Hz display enablement - generate pll programming tables panthor: - add timestamp query API - add realtime group priority - add fdinfo support etnaviv: - improve handling of DMA address limits - improve GPU hangcheck exynos: - Decon Exynos7870 support mediatek: - add OF graph support omap: - locking fixes bochs: - convert to gem/shmem from simpledrm v3d: - support big/super pages - add gemfs vc4: - BCM2712 support refactoring - add YUV444 format support udmabuf: - folio related fixes nouveau: - add panic support on nv50+" * tag 'drm-next-2024-11-21' of https://gitlab.freedesktop.org/drm/kernel: (1583 commits) drm/xe/guc: Fix dereference before NULL check drm/amd: Fix initialization mistake for NBIO 7.7.0 Revert "drm/amd/display: parse umc_info or vram_info based on ASIC" drm/amd/display: Fix failure to read vram info due to static BP_RESULT drm/amdgpu: enable GTT fallback handling for dGPUs only drm/amd/amdgpu: limit single process inside MES drm/fourcc: add AMD_FMT_MOD_TILE_GFX9_4K_D_X drm/amdgpu/mes12: correct kiq unmap latency drm/amdgpu: Support vcn and jpeg error info parsing drm/amd : Update MES API header file for v11 & v12 drm/amd/amdkfd: add/remove kfd queues on start/stop KFD scheduling drm/amdkfd: change kfd process kref count at creation drm/amdgpu: Cleanup shift coding style drm/amd/amdgpu: Increase MES log buffer to dump mes scratch data drm/amdgpu: Implement virt req_ras_err_count drm/amdgpu: VF Query RAS Caps from Host if supported drm/amdgpu: Add msg handlers for SRIOV RAS Telemetry drm/amdgpu: Update SRIOV Exchange Headers for RAS Telemetry Support drm/amd/display: 3.2.309 drm/amd/display: Adjust VSDB parser for replay feature ...	2024-11-21 14:56:17 -08:00
Linus Torvalds	071b34dcf7	sound updates for 6.13-rc1 ... This is a relatively calm cycle, and majority of changes are about ASoC. There are little changes in the core side but we received lots of new drivers for new vendors. * ALSA Core: - The new accel operation mode for compress-offload API; only the core part, and the actual user will follow at next * ASoC: - Continued API simplification works - Renaming of the sh directory to Renesas - Factoring out of some of the common code for Realtek devices - Ussal ASoC Intel SOF, AMD and SoundWire updates - Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081, Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307, Longsoon I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342, Qualcomm SM8750, RealTek RT721, and ST Microelectronics STM32MP25 * HD- and USB-audio: - Clean up of IRQ handling in legacy HD-audio driver - Fix soft lockup at disconnection of non-standard USB drivers - Scarlett2 mixer improvements - New quirks and cleanups in HD- and USB-audio -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmc9yFUOHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE8IMxAAoagGD3lQXQl6c7yoe0BATApiW71itLHP05SA KzVCeWtMMeROov9cWgzIJMqbj4d6fs/zxomYjYHzb+3IlTtMVkV+PWEIgtr0xck4 WRPj9V3vb68+S6tFlVrmsv4LwdWfwPwUgLJpvXZM/aFUxa+8i0lb2/g8yKPYvser dfqU1Uwi7fn3txTQiFiI61Hx7Nn3ISUhVpY3DwZTHYuLaRNfJOR0HdJTrlehnYZG KmvTg2WnYud687yEMC5AV1WTItoUUhMkuPGbpxWxGwk8bOfkbxKNh/EgNOO2Hubz E8RgYtCaq2TA0OS5YdY6Mk9blG7snOZW3pMULm1kFuLr1BD7JGz2Q5duoX6NyrrS gqzXPxPYCCCkLLkS672HMy9UzhM3j03LrgT1JxV3wbUMZoJWjD0zn1Tfv6WJ1M7g CZsjaZrqATK8bexM8QrdKSZcZOB7B3ZX0hNyx/SKXycuvg8jC8evm/qfAPKvU79O B3vivSs/YgquR62R8dp6OJQ75C3IVLv9PrLbS/RXrOgzx2hRZFG5/PWKr+pC5zIp T8qdBPuQ/f/gzbIgGkL2sRYYWGL+tg+hlD2CA5jP47DoUwcdxm15AK4Gv1qqJgFr QCmg3WuipUumJqyMcSKdyVqUytIeCBFTZqM1PUsehfdueeRkp0ZgV6hDDc+jSjWm fjycRuw= =gOHc -----END PGP SIGNATURE----- Merge tag 'sound-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This is a relatively calm cycle, and majority of changes are about ASoC. There are little changes in the core side but we received lots of new drivers for new vendors. ALSA Core: - The new accel operation mode for compress-offload API; only the core part, the actual user will follow later ASoC: - Continued API simplification works - Renaming of the sh directory to Renesas - Factoring out of some of the common code for Realtek devices - Ussal ASoC Intel SOF, AMD and SoundWire updates - Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081, Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307, Longsoon I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342, Qualcomm SM8750, RealTek RT721, and ST Microelectronics STM32MP25 HD- and USB-audio: - Clean up of IRQ handling in legacy HD-audio driver - Fix soft lockup at disconnection of non-standard USB drivers - Scarlett2 mixer improvements - New quirks and cleanups in HD- and USB-audio" * tag 'sound-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (278 commits) ALSA: hda: Poll jack events for LS7A HD-Audio ASoC: hdmi-codec: reorder channel allocation list ALSA: ump: Fix the wrong format specifier ASoC: Intel: soc-acpi-intel-lnl-match: add rt712_vb + rt1320 support ASoC: stm32: dfsdm: change rate upper limits ASoC: sma1307: fix uninitialized variable refence ASoC: dt-bindings: simple-mux: add idle-state property ASoc: simple-mux: add idle-state support ASoC: sdca: test adev before calling acpi_dev_for_each_child ASoC: SOF: ipc4-topology: remove redundant assignment to variable ret ASoC: amd: ps: fix the pcm device numbering for acp 6.3 platform ASoC: amd: acp: add soundwire machine driver for legacy stack ASoC: amd: acp: move get_acp63_cpu_pin_id() to common file ASoC: amd: ps: add soundwire machines for acp6.3 platform ASoC: amd: acp: add RT711, RT714 & RT1316 support for acp 6.3 platform ASoC: amd: acp: add rt722 based soundwire machines ALSA: compress_offload: Add missing descriptions in structs ALSA: 6fire: Release resources at card release ALSA: caiaq: Use snd_card_free_when_closed() at disconnection ALSA: us122l: Drop mmap_count field ...	2024-11-21 14:39:31 -08:00
Linus Torvalds	55ae3eef10	i2c-for-6.13-rc1 ... i2c-core (Wolfram) - drivers can now use a GPIO as a side channel for SMBus Alerts using a generic binding - regular stuff like mem leak fix, Makefile maintenance... i2c-host updates (Andi) Major Improvements and Refactoring: - All controllers using the 'remove_new' callback have been reverted to use the 'remove' callback. - Intel SCH controller underwent significant refactoring, this brings love and a modern look to the driver. - PIIX4 driver refactored to enable usage by other drivers (e.g., AMD ASF). - iMX/MXC improved message handling to reduce protocol overhead: Refactored DMA/non-DMA read/write and bus polling mechanisms to achieve this. - ACPI documentation for PIIX4. New Features: - i2c-cadence added support for atomic transfers. - Qualcomm CII added support for a 32MHz serial engine clock. Deprecated Features: - Dropped outdated support for AMD756 S4882 and NFORCE2 S4985. If somebody misses this, Jean will rewrite support using the proper i2c mux framework. New Hardware Support: - Added support for: - Intel Panther Lake (new ID) - AMD ASF (new driver) - S32G2/S32G3 SoCs (new ID) - Realtek RTL I2C Controller (new driver) - HJMC01 DesignWare ACPI HID (new ID) - PIC64GX to Microchip Core (new ID) - Qualcomm SDM670 to Qualcomm CCI (new ID) at24 updates (Bartosz) - add support for the lockable page on ST M24256E -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmc+/UUACgkQFA3kzBSg KbZrqA/+MqNiN8NIkgA3nIODQP1Cf/aUhywHITsRgoo85vVDHeiaJtKc25KMi6Tb I5GgHp9Q0TtYdXzKM+nC7xjO64h8obGRXPHv5fDbRAZlFbWSR8u+iQp9entuVJe4 TiRFh9M8chAC82QNCvYVKx3jTHlmZaR7bXDtoAf7bG0LdWnjey1JSFfn6cPweVNM 0sD95tjBDb53tCRPGVKrCsnrs5uGxugGvH5I16hB6iokbaiIlGosIBg/8YBGHCS8 V8RqLSfzCl7X7xICeRv2ttRWx78Nz38RBC+truR5OEvvdZ+J2UCZ0710/w6FWfPp F85ReZrG5bh49Jobt/AyC7VXqL6djg+C6jVU1rX8Eb3G6TapL4iCJe9CcI4EXANY 1mtzZ8fqg4EaVMVRQx3tiyjNFWQba9ssSyzRB8ZfCqmS6xV2HXJby3zNoDA9SoxH tNn3vp0FfOtdn4lGbYAJE4zUMupXiUkrgswj5sKltYjXh/OmaDLJfYeFhPp+SwvW uWuLZveM0mAn6BWyM4g9v6MIHWiUumkF5xwlAfNOh3ogxqUtAPtbzk7FQ332ni0Z X11J5EOBzbMQR24moRo7xtQSdoDDSQDpytOVXTY2QWv3rZuk0oVL57aifJdtTkrK QktmylTfYlfI2hWLRoWFJ1j7nQyBveiNHh/qq0hxCkXLP3vA5gs= =lrn5 -----END PGP SIGNATURE----- Merge tag 'i2c-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Core: - drivers can now use a GPIO as a side channel for SMBus Alerts using a generic binding - regular stuff like mem leak fix, Makefile maintenance... Host improvements and refactoring: - All controllers using the 'remove_new' callback have been reverted to use the 'remove' callback - Intel SCH controller underwent significant refactoring, this brings love and a modern look to the driver - PIIX4 driver refactored to enable usage by other drivers (e.g., AMD ASF) - iMX/MXC improved message handling to reduce protocol overhead: Refactored DMA/non-DMA read/write and bus polling mechanisms to achieve this. - ACPI documentation for PIIX4 New host features: - i2c-cadence support for atomic transfers - Qualcomm CII support for a 32MHz serial engine clock Deprecated features: - Dropped outdated support for AMD756 S4882 and NFORCE2 S4985. If somebody misses this, Jean will rewrite support using the proper i2c mux framework. New hardware IDs for existing drivers: - Intel Panther Lake - S32G2/S32G3 SoCs - HJMC01 DesignWare ACPI HID - PIC64GX to Microchip Core - Qualcomm SDM670 to Qualcomm CCI New drivers: - AMD ASF - Realtek RTL I2C Controller at24 updates: - add support for the lockable page on ST M24256E" * tag 'i2c-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (59 commits) docs: i2c: piix4: Add ACPI section i2c: Add driver for the RTL9300 I2C controller i2c: qcom-cci: Remove unused struct member cci_clk_rate dt-bindings: i2c: Add Realtek RTL I2C Controller i2c: busses: Use *-y instead of *-objs in Makefile i2c: imx: add support for S32G2/S32G3 SoCs dt-bindings: i2c: imx: add SoC specific compatible strings for S32G i2c: qcom-cci: Remove the unused variable cci_clk_rate i2c: Drop legacy muxing pseudo-drivers i2c: imx: prevent rescheduling in non dma mode i2c: imx: separate atomic, dma and non-dma use case i2c: imx: do not poll for bus busy in single master mode i2c: designware: Add a new ACPI HID for HJMC01 I2C controller i2c: qcom-geni: Keep comment why interrupts start disabled dt-bindings: i2c: microchip: corei2c: Add PIC64GX as compatible with driver i2c: designware: constify abort_sources i2c: Switch back to struct platform_driver::remove() i2c: qcom-geni: Support systems with 32MHz serial engine clock i2c: qcom-cci: Stop complaining about DT set clock rate dt-bindings: i2c: qcom-cci: Document SDM670 compatible ...	2024-11-21 13:19:29 -08:00
Linus Torvalds	fcc79e1714	Networking changes for 6.13. ... The most significant set of changes is the per netns RTNL. The new behavior is disabled by default, regression risk should be contained. Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its default value from PTP_1588_CLOCK_KVM, as the first is intended to be a more reliable replacement for the latter. Core ---- - Started a very large, in-progress, effort to make the RTNL lock scope per network-namespace, thus reducing the lock contention significantly in the containerized use-case, comprising: - RCU-ified some relevant slices of the FIB control path - introduce basic per netns locking helpers - namespacified the IPv4 address hash table - remove rtnl_register{,_module}() in favour of rtnl_register_many() - refactor rtnl_{new,del,set}link() moving as much validation as possible out of RTNL lock - convert all phonet doit() and dumpit() handlers to RCU - convert IPv4 addresses manipulation to per-netns RTNL - convert virtual interface creation to per-netns RTNL the per-netns lock infra is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim. - Introduce NAPI suspension, to efficiently switching between busy polling (NAPI processing suspended) and normal processing. - Migrate the IPv4 routing input, output and control path from direct ToS usage to DSCP macros. This is a work in progress to make ECN handling consistent and reliable. - Add drop reasons support to the IPv4 rotue input path, allowing better introspection in case of packets drop. - Make FIB seqnum lockless, dropping RTNL protection for read access. - Make inet{,v6} addresses hashing less predicable. - Allow providing timestamp OPT_ID via cmsg, to correlate TX packets and timestamps Things we sprinkled into general kernel code -------------------------------------------- - Add small file operations for debugfs, to reduce the struct ops size. - Refactoring and optimization for the implementation of page_frag API, This is a preparatory work to consolidate the page_frag implementation. Netfilter --------- - Optimize set element transactions to reduce memory consumption - Extended netlink error reporting for attribute parser failure. - Make legacy xtables configs user selectable, giving users the option to configure iptables without enabling any other config. - Address a lot of false-positive RCU issues, pointed by recent CI improvements. BPF --- - Put xsk sockets on a struct diet and add various cleanups. Overall, this helps to bump performance by 12% for some workloads. - Extend BPF selftests to increase coverage of XDP features in combination with BPF cpumap. - Optimize and homogenize bpf_csum_diff helper for all archs and also add a batch of new BPF selftests for it. - Extend netkit with an option to delegate skb->{mark,priority} scrubbing to its BPF program. - Make the bpf_get_netns_cookie() helper available also to tc(x) BPF programs. Protocols --------- - Introduces 4-tuple hash for connected udp sockets, speeding-up significantly connected sockets lookup. - Add a fastpath for some TCP timers that usually expires after close, the socket lock contention. - Add inbound and outbound xfrm state caches to speed up state lookups. - Avoid sending MPTCP advertisements on stale subflows, reducing risks on loosing them. - Make neighbours table flushing more scalable, maintaining per device neigh lists. Driver API ---------- - Introduce a unified interface to configure transmission H/W shaping, and expose it to user-space via generic-netlink. - Add support for per-NAPI config via netlink. This makes napi configuration persistent across queues removal and re-creation. Requires driver updates, currently supported drivers are: nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice. - Add ethtool support for writing SFP / PHY firmware blocks. - Track RSS context allocation from ethtool core. - Implement support for mirroring to DSA CPU port, via TC mirror offload. - Consolidate FDB updates notification, to avoid duplicates on device-specific entries. - Expose DPLL clock quality level to the user-space. - Support master-slave PHY config via device tree. Tests and tooling ----------------- - forwarding: introduce deferred commands, to simplify the cleanup phase Drivers ------- - Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic, Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the IRQs and queues to NAPI IDs, allowing busy polling and better introspection. - Ethernet high-speed NICs: - nVidia/Mellanox: - mlx5: - a large refactor to implement support for cross E-Switch scheduling - refactor H/W conter management to let it scale better - H/W GRO cleanups - Intel (100G, ice):: - adds support for ethtool reset - implement support for per TX queue H/W shaping - AMD/Solarflare: - implement per device queue stats support - Broadcom (bnxt): - improve wildcard l4proto on IPv4/IPv6 ntuple rules - Marvell Octeon: - Adds representor support for each Resource Virtualization Unit (RVU) device. - Hisilicon: - adds support for the BMC Gigabit Ethernet - IBM (EMAC): - driver cleanup and modernization - Cisco (VIC): - raise the queues number limit to 256 - Ethernet virtual: - Google vNIC: - implements page pool support - macsec: - inherit lower device's features and TSO limits when offloading - virtio_net: - enable premapped mode by default - support for XDP socket(AF_XDP) zerocopy TX - wireguard: - set the TSO max size to be GSO_MAX_SIZE, to aggregate larger packets. - Ethernet NICs embedded and virtual: - Broadcom ASP: - enable software timestamping - Freescale: - add enetc4 PF driver - MediaTek: Airoha SoC: - implement BQL support - RealTek r8169: - enable TSO by default on r8168/r8125 - implement extended ethtool stats - Renesas AVB: - enable TX checksum offload - Synopsys (stmmac): - support header splitting for vlan tagged packets - move common code for DWMAC4 and DWXGMAC into a separate FPE module. - Add the dwmac driver support for T-HEAD TH1520 SoC - Synopsys (xpcs): - driver refactor and cleanup - TI: - icssg_prueth: add VLAN offload support - Xilinx emaclite: - adds clock support - Ethernet switches: - Microchip: - implement support for the lan969x Ethernet switch family - add LAN9646 switch support to KSZ DSA driver - Ethernet PHYs: - Marvel: 88q2x: enable auto negotiation - Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2 - PTP: - Add support for the Amazon virtual clock device - Add PtP driver for s390 clocks - WiFi: - mac80211 - EHT 1024 aggregation size for transmissions - new operation to indicate that a new interface is to be added - support radio separation of multi-band devices - move wireless extension spy implementation to libiw - Broadcom: - brcmfmac: optional LPO clock support - Microchip: - add support for Atmel WILC3000 - Qualcomm (ath12k): - firmware coredump collection support - add debugfs support for a multitude of statistics - Qualcomm (ath5k): - Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support - Realtek: - rtw88: 8821au and 8812au USB adapters support - rtw89: add thermal protection - rtw89: fine tune BT-coexsitence to improve user experience - rtw89: firmware secure boot for WiFi 6 chip - Bluetooth - add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and 0x13d3:0x3623 - add Realtek RTL8852BE support for id Foxconn 0xe123 - add MediaTek MT7920 support for wireless module ids - btintel_pcie: add handshake between driver and firmware - btintel_pcie: add recovery mechanism - btnxpuart: add GPIO support to power save feature Signed-off-by: Paolo Abeni <pabeni@redhat.com> -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmc8sukSHHBhYmVuaUBy ZWRoYXQuY29tAAoJECkkeY3MjxOkLEYQAIMM6Qjh0bh3Byr3gOS1xZzXG+APLjP4 9Jr0p3i+X53i90jvVqzeVO5FTc95MVHSKZ3kvPkDMXSLUaEJxocNHCI5Dzl/2/qL wWdpUB6/ou+jKB4Bn6Z8OvVODT7qrr0tVa9M2/fuKWrIsOU/ntIhG8EhnGddk5U/ vKPSf5PUIb81uNRnF58VusY3wrT1dEoh9VfJYxL+ST+inPxjEAMy6Y+lmlsjGaSX jrS+Pp9KYiUwl3Qt0AQs+cG4OHkJdjbnChrfosWwpkiyddO8klVq06+wX/TiSzfF b9VZtBfy/GZs3lkE1mQkcILdtX5pP3YHQdpsuxFfVI0JHVszx2ck7WdoRux/8F0v kKZsYcO7bH9I1wMFP66Ff9hIbdEQaeucK+KdDkXyPNMfP91Vzmfjii8IBxOC36Ie BbOeFUrXyTxxJ2u0vf/X9JtIq8bcrkNrSd1n1jlGPMqG3FVzsY95+Oi4qfsyeUbl lS1PlVTqPMPFdX54HnxM3y2rJjhd7iXhkvmtuXNjRFThXlOiK3maAPWlM1aZ3b8u Vjs4JFUsW0tleZG+RzANjsGjXbf7AiPUGLZt+acem0K+fcjG4i5aGIAJrxwa/ORx eG74IZRt5cOI371W7gNLGHjwnuge8tFPgOWcRP2eozNm7jvMYALBejYS7eWUTvaf THcvVM+bupEZ =GzPr -----END PGP SIGNATURE----- Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "The most significant set of changes is the per netns RTNL. The new behavior is disabled by default, regression risk should be contained. Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its default value from PTP_1588_CLOCK_KVM, as the first is intended to be a more reliable replacement for the latter. Core: - Started a very large, in-progress, effort to make the RTNL lock scope per network-namespace, thus reducing the lock contention significantly in the containerized use-case, comprising: - RCU-ified some relevant slices of the FIB control path - introduce basic per netns locking helpers - namespacified the IPv4 address hash table - remove rtnl_register{,_module}() in favour of rtnl_register_many() - refactor rtnl_{new,del,set}link() moving as much validation as possible out of RTNL lock - convert all phonet doit() and dumpit() handlers to RCU - convert IPv4 addresses manipulation to per-netns RTNL - convert virtual interface creation to per-netns RTNL the per-netns lock infrastructure is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim. - Introduce NAPI suspension, to efficiently switching between busy polling (NAPI processing suspended) and normal processing. - Migrate the IPv4 routing input, output and control path from direct ToS usage to DSCP macros. This is a work in progress to make ECN handling consistent and reliable. - Add drop reasons support to the IPv4 rotue input path, allowing better introspection in case of packets drop. - Make FIB seqnum lockless, dropping RTNL protection for read access. - Make inet{,v6} addresses hashing less predicable. - Allow providing timestamp OPT_ID via cmsg, to correlate TX packets and timestamps Things we sprinkled into general kernel code: - Add small file operations for debugfs, to reduce the struct ops size. - Refactoring and optimization for the implementation of page_frag API, This is a preparatory work to consolidate the page_frag implementation. Netfilter: - Optimize set element transactions to reduce memory consumption - Extended netlink error reporting for attribute parser failure. - Make legacy xtables configs user selectable, giving users the option to configure iptables without enabling any other config. - Address a lot of false-positive RCU issues, pointed by recent CI improvements. BPF: - Put xsk sockets on a struct diet and add various cleanups. Overall, this helps to bump performance by 12% for some workloads. - Extend BPF selftests to increase coverage of XDP features in combination with BPF cpumap. - Optimize and homogenize bpf_csum_diff helper for all archs and also add a batch of new BPF selftests for it. - Extend netkit with an option to delegate skb->{mark,priority} scrubbing to its BPF program. - Make the bpf_get_netns_cookie() helper available also to tc(x) BPF programs. Protocols: - Introduces 4-tuple hash for connected udp sockets, speeding-up significantly connected sockets lookup. - Add a fastpath for some TCP timers that usually expires after close, the socket lock contention. - Add inbound and outbound xfrm state caches to speed up state lookups. - Avoid sending MPTCP advertisements on stale subflows, reducing risks on loosing them. - Make neighbours table flushing more scalable, maintaining per device neigh lists. Driver API: - Introduce a unified interface to configure transmission H/W shaping, and expose it to user-space via generic-netlink. - Add support for per-NAPI config via netlink. This makes napi configuration persistent across queues removal and re-creation. Requires driver updates, currently supported drivers are: nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice. - Add ethtool support for writing SFP / PHY firmware blocks. - Track RSS context allocation from ethtool core. - Implement support for mirroring to DSA CPU port, via TC mirror offload. - Consolidate FDB updates notification, to avoid duplicates on device-specific entries. - Expose DPLL clock quality level to the user-space. - Support master-slave PHY config via device tree. Tests and tooling: - forwarding: introduce deferred commands, to simplify the cleanup phase Drivers: - Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic, Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the IRQs and queues to NAPI IDs, allowing busy polling and better introspection. - Ethernet high-speed NICs: - nVidia/Mellanox: - mlx5: - a large refactor to implement support for cross E-Switch scheduling - refactor H/W conter management to let it scale better - H/W GRO cleanups - Intel (100G, ice):: - add support for ethtool reset - implement support for per TX queue H/W shaping - AMD/Solarflare: - implement per device queue stats support - Broadcom (bnxt): - improve wildcard l4proto on IPv4/IPv6 ntuple rules - Marvell Octeon: - Add representor support for each Resource Virtualization Unit (RVU) device. - Hisilicon: - add support for the BMC Gigabit Ethernet - IBM (EMAC): - driver cleanup and modernization - Cisco (VIC): - raise the queues number limit to 256 - Ethernet virtual: - Google vNIC: - implement page pool support - macsec: - inherit lower device's features and TSO limits when offloading - virtio_net: - enable premapped mode by default - support for XDP socket(AF_XDP) zerocopy TX - wireguard: - set the TSO max size to be GSO_MAX_SIZE, to aggregate larger packets. - Ethernet NICs embedded and virtual: - Broadcom ASP: - enable software timestamping - Freescale: - add enetc4 PF driver - MediaTek: Airoha SoC: - implement BQL support - RealTek r8169: - enable TSO by default on r8168/r8125 - implement extended ethtool stats - Renesas AVB: - enable TX checksum offload - Synopsys (stmmac): - support header splitting for vlan tagged packets - move common code for DWMAC4 and DWXGMAC into a separate FPE module. - add dwmac driver support for T-HEAD TH1520 SoC - Synopsys (xpcs): - driver refactor and cleanup - TI: - icssg_prueth: add VLAN offload support - Xilinx emaclite: - add clock support - Ethernet switches: - Microchip: - implement support for the lan969x Ethernet switch family - add LAN9646 switch support to KSZ DSA driver - Ethernet PHYs: - Marvel: 88q2x: enable auto negotiation - Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2 - PTP: - Add support for the Amazon virtual clock device - Add PtP driver for s390 clocks - WiFi: - mac80211 - EHT 1024 aggregation size for transmissions - new operation to indicate that a new interface is to be added - support radio separation of multi-band devices - move wireless extension spy implementation to libiw - Broadcom: - brcmfmac: optional LPO clock support - Microchip: - add support for Atmel WILC3000 - Qualcomm (ath12k): - firmware coredump collection support - add debugfs support for a multitude of statistics - Qualcomm (ath5k): - Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support - Realtek: - rtw88: 8821au and 8812au USB adapters support - rtw89: add thermal protection - rtw89: fine tune BT-coexsitence to improve user experience - rtw89: firmware secure boot for WiFi 6 chip - Bluetooth - add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and 0x13d3:0x3623 - add Realtek RTL8852BE support for id Foxconn 0xe123 - add MediaTek MT7920 support for wireless module ids - btintel_pcie: add handshake between driver and firmware - btintel_pcie: add recovery mechanism - btnxpuart: add GPIO support to power save feature" * tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits) mm: page_frag: fix a compile error when kernel is not compiled Documentation: tipc: fix formatting issue in tipc.rst selftests: nic_performance: Add selftest for performance of NIC driver selftests: nic_link_layer: Add selftest case for speed and duplex states selftests: nic_link_layer: Add link layer selftest for NIC driver bnxt_en: Add FW trace coredump segments to the coredump bnxt_en: Add a new ethtool -W dump flag bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr() bnxt_en: Add functions to copy host context memory bnxt_en: Do not free FW log context memory bnxt_en: Manage the FW trace context memory bnxt_en: Allocate backing store memory for FW trace logs bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem() bnxt_en: Refactor bnxt_free_ctx_mem() bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type bnxt_en: Update firmware interface spec to 1.10.3.85 selftests/bpf: Add some tests with sockmap SK_PASS bpf: fix recursive lock when verdict program return SK_PASS wireguard: device: support big tcp GSO wireguard: selftests: load nf_conntrack if not present ...	2024-11-21 08:28:08 -08:00
Linus Torvalds	14d0e1a09f	soc: driver updates for 6.12 ... Nothing particular important in the SoC driver updates, just the usual improvements to for drivers/soc and a couple of subsystems that don't fit anywhere else: - The largest set of updates is for Qualcomm SoC drivers, extending the set of supported features for additional SoCs in the QSEECOM, LLCC and socinfo drivers.a - The ti_sci firmware driver gains support for power managment - The drivers/reset subsystem sees a rework of the microchip sparx5 and amlogic reset drivers to support additional chips, plus a few minor updates on other platforms - The SCMI firmware interface driver gains support for two protocol extensions, allowing more flexible use of the shared memory area and new DT binding properties for configurability. - Mediatek SoC drivers gain support for power managment on the MT8188 SoC and a new driver for DVFS. - The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot and a few bugfixes - The Hisilicon Kunpeng HCCS driver gains support for configuring lanes through sysfs Finally, there are cleanups and minor fixes for drivers/soc, drivers/bus, and drivers/memory, including changing back the .remove_new callback to .remove, as well as a few other updates for freescale (powerpc) soc drivers, NXP i.MX soc drivers, cznic turris platform driver, memory controller drviers, TI OMAP SoC drivers, and Tegra firmware drivers -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc+DsUACgkQYKtH/8kJ UifNWRAA49Ife6ybk8jamM9Bd07kFmHdaad0ttgUtx7HMJBg51+JLNFwTVYM2p6b A1SWCsS+sxP1RBKuhgZrt+sDPAoDlYLQaF1WQB7cs4FXqYpc2Po8BmBili5BV635 Zv/9C9ofsWiWg9pGy0rRFvHW0W48lBoQM61YZzQc85pyEod5RSgji/jUEzvBvhln V3hegw0myBecJ8b7jH9Fjre3gMSC65amlXemkDS/7FGXXA7V3BKmALglJj6BR4RD QtQgFOAe/XGmbOguMvZJvVbMnW8PbmS5k50ppixBPAultHflkdg4DdnIW59yUfK+ Mr98sW8U/LirACX93uwSzBNY1m5cW+GP4DoemxIUIQAvXxR4HroLoJdHS+BfWH+H Pn9dgSZu/dUlxfzTYzvd0B5TUjDGkYubVtQ00PLOWFHNfhZSmCqGl5J5NjgINRCf mBwhvUBYXgvNrOaEnll2kt2ONbxT7WAJAcKdnXKDjG4nPDyXBLRYoE4gro4Iii7+ 1OA7NlInwW+XFfpIIJeYa+AOTgb0/MKdONG+CkUnn6Bc9+B7Xdg0w0VDlmsVbXae fRyaI6XKmyNtmFZM4+gUxIhzvOgYpOoMITQJHcHSYuzWQpsnkkRas9aTCyBSLAd4 D59cQwqtmE9rCfp3A7heMeKCIRtfJzoWnW0bjJAPSccLyJP99rI= =xeCE -----END PGP SIGNATURE----- Merge tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "Nothing particular important in the SoC driver updates, just the usual improvements to for drivers/soc and a couple of subsystems that don't fit anywhere else: - The largest set of updates is for Qualcomm SoC drivers, extending the set of supported features for additional SoCs in the QSEECOM, LLCC and socinfo drivers.a - The ti_sci firmware driver gains support for power managment - The drivers/reset subsystem sees a rework of the microchip sparx5 and amlogic reset drivers to support additional chips, plus a few minor updates on other platforms - The SCMI firmware interface driver gains support for two protocol extensions, allowing more flexible use of the shared memory area and new DT binding properties for configurability. - Mediatek SoC drivers gain support for power managment on the MT8188 SoC and a new driver for DVFS. - The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot and a few bugfixes - The Hisilicon Kunpeng HCCS driver gains support for configuring lanes through sysfs Finally, there are cleanups and minor fixes for drivers/{soc, bus, memory}, including changing back the .remove_new callback to .remove, as well as a few other updates for freescale (powerpc) soc drivers, NXP i.MX soc drivers, cznic turris platform driver, memory controller drviers, TI OMAP SoC drivers, and Tegra firmware drivers" * tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (116 commits) soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting() soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped() platform: cznic: turris-omnia-mcu: Rename variable holding GPIO line names platform: cznic: turris-omnia-mcu: Document the driver private data structure firmware: turris-mox-rwtm: Document the driver private data structure bus: Switch back to struct platform_driver::remove() soc: qcom: ice: Remove the device_link field in qcom_ice drm/msm/adreno: Setup SMMU aparture for per-process page table firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID firmware: arm_scpi: Check the DVFS OPP count returned by the firmware soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404 soc: qcom: llcc: Flip the manual slice configuration condition dt-bindings: firmware: qcom,scm: Document sm8750 SCM firmware: qcom: uefisecapp: Allow X1E Devkit devices misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent' misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property' soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC ...	2024-11-20 15:40:54 -08:00
Linus Torvalds	9c39d5ab45	soc: devicetree updates for 6.13 ... This release adds the devicetree files for an impressive number of new SoC variants, though as expected these are all related to others we already support: - The microchip sam9x7 devicetree is now added, after the device driver and platform code has already made it in. This is likely the last ARMv5 (!) platform to ever get added, updating the 20+ year old at91/sam9 platform wtih DDR3 memory and gigabit ethernet. - On the Apple platform, there are now devicetree files for a number of A-series SoCs in addition to the M-series ones, these are used primarily in phones and tablets, but are closely related to the already supported chips. - Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in older Samsung Galaxy phones. - Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely related to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end laptops. - Rockchip RK3528 and RK3576 are new variants of their TV box and Tablet chips, still using the older ARMv8.0 cores from RK3328/RK3399 but with a newer process and other improvements from the RK35xx (otherwise ARMv8.2) chips. RK3566T and RK3399-S are also added, these are just lower-cost versions of their normal counterparts. - TI J742S2 is a feature-reduced version of the J784s4 industrial/automotive SoC, with fewer CPU cores. - Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM (Cortex-A53) core, at this point support is only added for running on the RISC-V side on the LicheeRV Nano board. A total of 92 new .dts files describing individual machines is added, which must be a new record. The majority of these is for the newly added chips above, notably all the Apple phones and tablets. The other new machines include nine industrial/embedded boards with NXP i.MX6 or i.MX8 SoCs, eight for Rockchips RK35XX and one or two each for Rockchips RV1109, RK3308, Allwinner A33, Tegra 234, Qualcomm qcs9100/sc8280xp/x1e80100, TI AM625 and Starfive JH7110. As usual there are also many newlyad added features in existing boards as well as cleanups and minor bugfixes. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc92V4ACgkQYKtH/8kJ Uie7+xAA5BIu2fSl+cCCOLdWvNulgYJBZfgOC+1vay3A3zykTR5Hd/X4/GOetqb6 uhCJ7MER0md2PBCdffN0JDuDnvBGdOEbHghsY3iqqwP4ad+bk4+Ib/dxgM0uid3t W2NykLvmXmjFJiwjvMKE4aSPi+lCskLehPC05IIJvM/DplGflIoq7Rf+q5WIvStT K5kpluJBD81oQkfBn7FwVJWeM6OZ1CZg413m0PNMoojd6SzyPVNGnd004qEHfwkv Ra1w9cHM2+zagPrkTrFp0bpxfUYwoXiP8uPq9crXrhgeq4JmQBHuTR0ek+mMC2nI aRgi91za8YPgC8APXks64BBqXCxHVse9n228MpldMAabURez5wMkufNFfQc6yLks AhQxD2joVFS+i/pE8WyFlS3/aopNUzIbqVyIhpYiYBLz8xQBSv7KjqySRufrBEhP lMA548uDQK5p1TRnl8L6cDXdHTN9MbqtREIozBeO20iolHJtqLBcw4erZFhwnJsP 2QQVN9P8AXOE/U/RZcV8Wfm7kUoU4FI29G3XlmUnpBmCHQd3Ql2Xv56gaDaAtb3s hF83uTA8bKjby9Xu0c9JQREeNsLEmI/WwuUWlSEcn1cGBZ5ahg8FMta55H8tpX8O OizWoPviwUar7HFASA/ZvN0KoPgq/a8HWRXT+Q+/xBBqnHshtLk= =Ha1w -----END PGP SIGNATURE----- Merge tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC devicetree updates from Arnd Bergmann: "This release adds the devicetree files for an impressive number of new SoC variants, though as expected these are all related to others we already support: - The microchip sam9x7 devicetree is now added, after the device driver and platform code has already made it in. This is likely the last ARMv5 (!) platform to ever get added, updating the 20+ year old at91/sam9 platform with DDR3 memory and gigabit ethernet. - On the Apple platform, there are now devicetree files for a number of A-series SoCs in addition to the M-series ones, these are used primarily in phones and tablets, but are closely related to the already supported chips. - Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in older Samsung Galaxy phones. - Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely related to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end laptops. - Rockchip RK3528 and RK3576 are new variants of their TV box and Tablet chips, still using the older ARMv8.0 cores from RK3328/RK3399 but with a newer process and other improvements from the RK35xx (otherwise ARMv8.2) chips. RK3566T and RK3399-S are also added, these are just lower-cost versions of their normal counterparts. - TI J742S2 is a feature-reduced version of the J784s4 industrial/automotive SoC, with fewer CPU cores. - Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM (Cortex-A53) core, at this point support is only added for running on the RISC-V side on the LicheeRV Nano board. A total of 92 new .dts files describing individual machines is added, which must be a new record. The majority of these is for the newly added chips above, notably all the Apple phones and tablets. The other new machines include nine industrial/embedded boards with NXP i.MX6 or i.MX8 SoCs, eight for Rockchips RK35XX and one or two each for Rockchips RV1109, RK3308, Allwinner A33, Tegra 234, Qualcomm qcs9100/sc8280xp/x1e80100, TI AM625 and Starfive JH7110. As usual there are also many newly added features in existing boards as well as cleanups and minor bugfixes" * tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (718 commits) arm64: dts: apm: Remove unused and undocumented "bus_num" property arm: dts: spear13xx: Remove unused and undocumented "pl022,slave-tx-disable" property arm64: dts: amd: Remove unused and undocumented "amd,zlib-support" property arm64: dts: lg131x: Update spi clock properties arm64: dts: seattle: Update spi clock properties arm64: dts: rockchip: use less broad pinctrl for pcie3x1 on Radxa E25 arm64: dts: rockchip: add Radxa ROCK 5C dt-bindings: arm: rockchip: add Radxa ROCK 5C arm64: dts: rockchip: orangepi-5-plus: Enable GPU arm64: dts: rockchip: enable USB3 on NanoPC-T6 arm64: dts: rockchip: adapt regulator nodenames to preferred form arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi GenBook arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi 4B arm64: dts: rockchip: Enable HDMI0 for rk3588 Cool Pi CM5 EVB arm64: dts: rockchip: Enable HDMI on NanoPi R6C/R6S arm64: dts: rockchip: Enable GPU on NanoPi R6C/R6S arm64: dts: rockchip: Enable HDMI on Hardkernel ODROID-M2 arm64: dts: rockchip: Remove non-removable flag from sdmmc on rk3576-sige5 arm64: dts: allwinner: a100: perf1: Add eMMC and MMC node arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer ...	2024-11-20 15:26:46 -08:00
Linus Torvalds	9f5a6a1fe6	media updates for v6.13-rc1 ... -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmc8Q80ACgkQCF8+vY7k 4RX+3g//dMBSmu3uC9OiXyfw3aB8w62RMeieRxSVPMdkiacUm1J8HyzHnXPXIUn3 tfBT9E/YbeFZ+PlrOXRDUi1i8jmN47VuwRe01rxxF/FdlYknC2eGH3Ug9DW90VBh wmZ1kSjyjizwDkKAm+Jc2xynTaX+iInJ4Kzp9RStDZPuaqj2Qzd1qVRk2FJwAYRh 5dTpi0W1PexjxQXDIcnHi/tPapGLSP5PnrunrAJR0tYfp60wrKMaxTO36yJzbnDP MxkF8A+9dWtePRqoPWxPIvnOVu/+Twc730xkQp62qPvwEM2HZRtU7cgQFlWos6p/ ijK2i6sAQslMhQ9oIyKlO7HpXX60rjE3XtdzEtGxBq6DyIqx1riN+OqJB2C4Cdsr 2qUET8aTIisPURw1ecNAbthvLt8tljBe08/eX0GYaWFjALJx3Pds23ahH8hw295N o3SY5NaGmO9Tg6HzYLSwfBmxgGpWDuRic6PDCVKok5mS5D1+uV/tu8fQFiNiFNVe Okufjvo7HtZ3+rWR90b/Udpz/lBB/dceppnUX2iKevrG190VHxEwJ2pQKkfdH9ha LUZQajikiv5rbGxKIGrjrCnjrJ24TC2vCSPhkgOb1r91LUY4RUV61c3hZbH73rzQ 2Ykwvmy+gpE4GEYiJRfSR6KlXdBruMa5FToLUHEK0uBMSlG5k7Q= =25BS -----END PGP SIGNATURE----- Merge tag 'media/v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - removal of the old omap4iss media driver - mantis: remove orphan mantis_core.h - add support for Raspberypi CFE - uvc driver got a co-maintainer - main media tree moved to git://linuxtv.org/media.git - lots of driver cleanups, updates and fixes * tag 'media/v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (233 commits) docs: media: update location of the media patches MAINTAINERS: update location of media main tree media: MAINTAINERS: Add Hans de Goede as USB VIDEO CLASS co-maintainer media: platform: samsung: s5p-jpeg: Remove deadcode media: qcom: camss: Add MSM8953 resources media: dt-bindings: Add qcom,msm8953-camss media: qcom: camss: implement pm domain ops for VFE v4.1 media: platform: exynos4-is: Fix an OF node reference leak in fimc_md_is_isp_available media: adv7180: Also check for "adi,force-bt656-4" media: dt-bindings: adv7180: Document 'adi,force-bt656-4' media: mgb4: Fix inconsistent input/output alignment in loopback mode media: replace obsolete hans.verkuil@cisco.com alias Documentation: media: improve V4L2_CID_MIN_BUFFERS_FOR_*, doc media: vicodec: add V4L2_CID_MIN_BUFFERS_FOR_* controls media: atomisp: Add check for rgby_data memory allocation failure media: atomisp: remove redundant re-checking of err media: atomisp: Fix spelling errors reported by codespell media: atomisp: Remove License information boilerplate media: atomisp: Fix typos in comment media: atomisp: hmm_bo: Fix spelling errors in hmm_bo.h ...	2024-11-20 14:01:15 -08:00
Linus Torvalds	b57807cbbf	hid-for-linus-2024111801 ... -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIVAwUAZzusZKZi849r7WBJAQKH9Q/+Llff1j+bP/W2E987vDy8zfFrMHR1nTrB nJb1mXKCp1AG+HcrrJh+9nVZXaXJtoduJ83wufxZoeK2jT06ij+TXPRW3JJcYooO C1UK8CI6fQBzTzKtDLRdBxv8MVTyuFI8KkBasDQQEJafRSN4rW007zA5B+EftcXe N9eb1+BiSbIMDtFdLw6N7kvDwfUj9iWO34cmH7ahv1Y0mj94OCRylN3p3fsbvkjG N5VP0Dm47X5H3OhS85HuVVskpFeMWBnNnLBFCxSoSELhl9pbXcriNQtUrk+uyHfL ObGrUajJlw6rrlCwugonJ5a6HmpWcfZBaXlvkP1b/q4oAePQ+Zuv0RStvPeqiM07 3m4XJf8kcRhMnUVYKo4nv9kVedK+EKu/HBZQsgTdDlTKV3BXpktt7PRD/WUKZ7yG kr/JWOlJho2Lzg7ky/47aJOgRfaLJzhPx1vSoSHrglB4L+4b+J0wZassc/iTkA0Q 9JS1Jci41oAcMzDW4KMkE2GIyXeTeSUTJH54DAm4+SXwkR1Sgn0K+ogceRc86ooA ZQu8touqvHBrVekC6jaFAA92IekLO5UFmiUcbQ1MHFdjx5Y9nruwKd2DulLV9cb9 XdHZMzT2RSdL1DLh5LlXRhLOSplhg0sUj9/XkCHIMX2GXa+ZNgFEA9VxDYBnB+dJ XZsGAHtgWQg= =J6g1 -----END PGP SIGNATURE----- Merge tag 'hid-for-linus-2024111801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - improvement in the way hid-bpf coexists with specific drivers (others than hid-generic) that are already bound to devices (Benjamin Tissoires) - removal of three way-too-aggressive BUG_ON()s from HID drivers (He Lugang) - assorted cleanups and small code fixes to HID core (Dmitry Torokhov, Yan Zhen, Nathan Chancellor, Andy Shevchenko) - support for Corsair Void headset family (Stuart Hayhurst) - Support for Goodix GT7986U SPI (Charles Wang) - initial vendor-specific driver for Kysona, currently adding support for Kysona M600 (Lode Willems) - other assorted code cleanups and small bugfixes all over the place * tag 'hid-for-linus-2024111801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (40 commits) HID: multitouch: make mt_set_mode() less cryptic HID: hid-goodix-spi: Add OF supports dt-bindings: input: Goodix GT7986U SPI HID Touchscreen HID: hyperv: streamline driver probe to avoid devres issues HID: magicmouse: Apple Magic Trackpad 2 USB-C driver support HID: rmi: Add select RMI4_F3A in Kconfig HID: wacom: Interpret tilt data from Intuos Pro BT as signed values HID: steelseries: Add capacity_level mapping HID: steelseries: Fix battery requests stopping after some time HID: hid-goodix: Fix HID get/set feature operation overwritten problem HID: hid-goodix: Return 0 when receiving an empty HID feature package HID: bpf: drop use of Logical|Physical|UsageRange HID: bpf: Fix Rapoo M50 Plus Silent side buttons HID: bpf: Fix NKRO on Mistel MD770 HID: replace BUG_ON() with WARN_ON() HID: wacom: Set eraser status when either 'Eraser' or 'Invert' usage is set HID: Kysona: add basic online status HID: Kysona: check battery status every 5s using a workqueue HID: Kysona: Add basic battery reporting for Kysona M600 HID: Add IDs for Kysona ...	2024-11-20 13:57:40 -08:00
Linus Torvalds	e6de688e93	Devicetree updates for v6.13: ... Bindings: - Enable dtc "interrupt_provider" warnings for binding examples. Fix the warnings in fsl,mu-msi and ti,sci-inta due to this. - Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and altr,fpga-passive-serial to DT schema format - Add some documentation on the different forms of YAML text blocks which are a constant source of review comments - Fix some schema errors in constraints for arrays - Add compatibles for qcom,sar2130p-pdc and onnn,adt7462 DT core: - Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n - Add some warnings on deprecated address handling - Rework early_init_dt_scan() so the arch can pass in the phys address of the DTB as __pa() is not always valid to use. This fixes a warning for arm64 with kexec. - Add and use some new DT graph iterators for iterating over ports and endpoints - Rework reserved-memory handling to be sized dynamically for fixed regions - Optimize of_modalias() to avoid a strlen() call - Constify struct device_node and property pointers where ever possible -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmc7qaoACgkQ+vtdtY28 YcN54g/+Ifz4hQTSWV+VBhihovMMPiQUdxZ+MfJfPnPcZ7NJzaTf+zqhZyS4wQou v0pdtyR0B1fCM/EvKaYD+1aTTAQFEIT5Dqac+9ePwqaYqSk+yCTxyzW9m+P3rTPV THo8SGRss7T+Rs+2WaUGxphTJItMGIRdbBvoqK+82EdKFXXKw2BSD8tlJTWwbTam 9xkrpUzw7f4FvVY8vVhRyOd5i8/v+FH8D65DMIT6ME9zRn4MzKVzCg6udgYeCBld C2XbV+wnyewtjrN2IX+2uQ2mheb7yJu3AEI3iFR5x/sRrsSLpisxrUl38xOOpxrM XxYtHgE3omjagQ+y+L2PMthlKvhFrXVXIvhUH8xxje5z1Vyq3VMfiABkHlMpAnys 5LY4xEhvqDkPNo65UmjMiHxGW/xtcKsmAZBOp+HLerZfCJIFvl380fi8mNg/Sjvz 7ExCSpzCPsHASZg7QCTplU3BUtg+067Ch/k8Hsn/Og73Pqm3xH4IezQZKwweN9ZT LC6OQBI7C3Yt1hom9qgUcA4H4/aaPxTVV7i0DGuAKh8Lon6SaoX2yFpweUBgbsL/ c9DIW4vbYBIGASxxUbHlNMKvPCKACKmpFXhsnH5Waj+VWSOwsJ8bjGpH8PfMKdFW dyJB/r94GqCGpCW7+FC1qGmXiQJGkCo89pKBVjSf4Kj45ht/76o= =NCYS -----END PGP SIGNATURE----- Merge tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "Bindings: - Enable dtc "interrupt_provider" warnings for binding examples. Fix the warnings in fsl,mu-msi and ti,sci-inta due to this. - Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and altr,fpga-passive-serial to DT schema format - Add some documentation on the different forms of YAML text blocks which are a constant source of review comments - Fix some schema errors in constraints for arrays - Add compatibles for qcom,sar2130p-pdc and onnn,adt7462 DT core: - Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n - Add some warnings on deprecated address handling - Rework early_init_dt_scan() so the arch can pass in the phys address of the DTB as __pa() is not always valid to use. This fixes a warning for arm64 with kexec. - Add and use some new DT graph iterators for iterating over ports and endpoints - Rework reserved-memory handling to be sized dynamically for fixed regions - Optimize of_modalias() to avoid a strlen() call - Constify struct device_node and property pointers where ever possible" * tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits) of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible of/address: Rework bus matching to avoid warnings of: WARN on deprecated #address-cells/#size-cells handling of/fdt: Don't use default address cell sizes for address translation dt-bindings: Enable dtc "interrupt_provider" warnings of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml media: xilinx-tpg: use new of_graph functions fbdev: omapfb: use new of_graph functions gpu: drm: omapdrm: use new of_graph functions ASoC: audio-graph-card2: use new of_graph functions ASoC: audio-graph-card: use new of_graph functions ASoC: test-component: use new of_graph functions of: property: use new of_graph functions of: property: add of_graph_get_next_port_endpoint() of: property: add of_graph_get_next_port() of: module: remove strlen() call in of_modalias() ...	2024-11-20 13:19:25 -08:00
Linus Torvalds	38556294b8	MMC core: ... - Add support for Ultra Capacity SD cards (SDUC, 2TB to 128TB) - Add support for Ultra High-Speed II SD cards (UHS-II) - Use a reset control for pwrseq_simple - Add SD card quirk for broken poweroff notification - Use GFP_NOIO for SD ACMD22 MMC host: - bcm2835: Introduce proper clock handling - mtk-sd: Add support for the Host-Software-Queue interface - mtk-sd: Add support for the mt7988/mt8196 variants - mtk-sd: Fix a couple of error paths in ->probe() - sdhci: Add interface to support UHS-II SD cards - sdhci_am654: Fixup support for changing the signal voltage level - sdhci-cadence: Add support for the Microchip PIC64GX variant - sdhci-esdhc-imx: Add support for eMMC HW-reset - sdhci-msm: Add support for the X1E80100/IPQ5424/SAR2130P/QCS615 variants - sdhci-of-arasan: Add support for eMMC HW-reset - sdhci-pci-gli: Add UHS-II support for the GL9767/GL9755 variants MEMSTICK: - A couple of minor updates -----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmc7NnoXHHVsZi5oYW5z c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCnQPRAAkxvhptCjKuLBIMBrNZglQElp Ncm8fXDiS72CvLwC3bp7rxognCKLVQGWc8GrxcBOxMSB5eiDyPe6xcLLQ2Zrm4l/ msnfP29VDtmWw3K1iC2Uzo0vlMWYyRFX0OK3fz3d6WL0dE6TXy5adsdy9BmdxGXk vpDgiTWkSZcoT/upuXs8/0N87eSgLUFzZ8uPNP+aHtF4AVWIwhJ3Y1MKqdfGrUlw 7b9bFeh6DelA+jGDxsPsqSwDBh2CDDP3YaPFYf4yyaeTRJmp6DMSEqjDifBa+hDn wkwNGj9bN05HeRN3TfsF/Z22LcaPcbWlLYh8p06h+Ws+R/2KxAXdV3oWnKNLQB9R 5WIdgb7HBD2OS2RymPeHygPPGt6zgxk55UfTBwchg7fHyugXvpcT/JDS2mbPQT4w Ty4s217wBn6Kkt4/8fWhHyG/rKBTq02Etmdery4AAM49M2iPvf+edio53FLnskrq xB8kYn5UZkk9dQ+GseC4+tXe8A1G/sxh/E2aJ/b15Mc9Mh1/BqL3g2532A+z6x5Q 8o4nyztCJhKWtfYxo1slnWzF+Axrz6ZXgVYh5MecMk9EjKVcX6oN+FGpiK/cg3dQ 7FFyzf+YGwdnOhuHhdBG0NTbvKvIRA0rMQ3xvhsfXqCI206j7FZNpWOxXYn36Lgt oZlprarw04AoECCg5Ko= =LGdl -----END PGP SIGNATURE----- Merge tag 'mmc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC updates from Ulf Hansson: "MMC core: - Add support for Ultra Capacity SD cards (SDUC, 2TB to 128TB) - Add support for Ultra High-Speed II SD cards (UHS-II) - Use a reset control for pwrseq_simple - Add SD card quirk for broken poweroff notification - Use GFP_NOIO for SD ACMD22 MMC host: - bcm2835: Introduce proper clock handling - mtk-sd: Add support for the Host-Software-Queue interface - mtk-sd: Add support for the mt7988/mt8196 variants - mtk-sd: Fix a couple of error paths in ->probe() - sdhci: Add interface to support UHS-II SD cards - sdhci_am654: Fixup support for changing the signal voltage level - sdhci-cadence: Add support for the Microchip PIC64GX variant - sdhci-esdhc-imx: Add support for eMMC HW-reset - sdhci-msm: Add support for the X1E80100/IPQ5424/SAR2130P/QCS615 variants - sdhci-of-arasan: Add support for eMMC HW-reset - sdhci-pci-gli: Add UHS-II support for the GL9767/GL9755 variants MEMSTICK: - A couple of minor updates" * tag 'mmc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (78 commits) mmc: pwrseq_simple: Handle !RESET_CONTROLLER properly mmc: mtk-sd: Fix MMC_CAP2_CRYPTO flag setting mmc: mtk-sd: Fix error handle of probe function mmc: core: Correction a warning caused by incorrect type in assignment for UHS-II mmc: sdhci-esdhc-imx: Update esdhc sysctl dtocv bitmask mmc: sdhci-esdhc-imx: Implement emmc hardware reset mmc: core: Correct type in variable assignment for UHS-II mmc: sdhci-uhs2: correction a warning caused by incorrect type in argument mmc: sdhci-uhs2: Remove unnecessary variables mmc: sdhci-uhs2: Correct incorrect type in argument mmc: sdhci: Make MMC_SDHCI_UHS2 config symbol invisible mmc: sdhci-uhs2: Remove unnecessary NULL check mmc: core: Fix error paths for UHS-II card init and re-init mmc: core: Add error handling of sd_uhs2_power_up() mmc: core: Simplify sd_uhs2_power_up() mmc: bcm2835: Introduce proper clock handling mmc: bcm2835: Fix type of current clock speed dt-bindings: mmc: Add sdhci compatible for QCS615 mmc: core: Use GFP_NOIO in ACMD22 dt-bindings: mmc: sdhci-msm: Add SAR2130P compatible ...	2024-11-20 12:51:32 -08:00
Linus Torvalds	75f2b37dd0	pmdomain core: ... - Set the required dev for a required OPP during genpd attach - Add support for required OPPs to dev_pm_domain_attach_list() pmdomain providers: - ti: Enable GENPD_FLAG_ACTIVE_WAKEUP flag for ti_sci PM domains - mediatek: Add support for MT6735 PM domains - mediatek: Use OF-specific regulator API to get power domain supply - qcom: Add support for the SM8750/SAR2130P/qcs615/qcs8300 rpmhpds pmdomain consumers: - Convert a couple of consumer drivers to *_pm_domain_attach|detach_list() opp core: - Rework and cleanup some code that manages required OPPs - Remove *_opp_attach|detach_genpd() -----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmc7Y+QXHHVsZi5oYW5z c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCmbrw/9FVdo3+mo6EZne+Zsxc0+3N9G bRwkgyCB8WSFy6MHD1TRyP9u8bFgFDitSxcUGuBW0l9t1le3IcsYwfbTEEZpUkU4 iasPoZoFKA3Akfr7tvQpIpSNh8MIBMFy7CfxWpsfiHlmwrIH6oT6HmlwWwFsbVxh Fv8xA5SOE1KRHq0Aos23h7MizPsav/PYSh/4Ga5l6ZBlm40c16cE0i0M4RRUnoNY FmUBe57HoumDd05ToFR9wrqMEVWbAJHV4xZpZwnfYUhwGrgbxUWI/1FIfwxtob12 OExPr9kiV8/f8Kfp3E3ul0R8q8XYaYZaT3R7nF5QOngLZCCpD5H9aWEcAihUryBh Ol9Wao0Ku1JqLc776bjwf92ozFDtx0yUN/8LXmQgUu+e+MC3eAOrsls+U4731p+Y V80mvBpqn8AbX7LOjJvmbOhK6Qnm0cHo2cs0afBSS5c9RBcCWuEy9d7n8dks6JX2 7H6ySDaKoEEK06V6VzEKdHQoRFkmw95w4n7Ei3OL0cxNLcT1ILGA1+O7PPw+6h4T 3UnSik6szZCBXFFaDsw4J53HZACVZWbkyrk5Dbsigte8lh6e2VI+qd9whd46nuCY Sn4vJ399FJvXBuEIu+8yymGwn/NSpgd6ybpkwdDNJ+fItbes7DQhtxM6k74ANAhf 0irf1o4Yv0S5W+pXBAM= =SpyF -----END PGP SIGNATURE----- Merge tag 'pmdomain-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull pmdomain updates from Ulf Hansson: "pmdomain core: - Set the required dev for a required OPP during genpd attach - Add support for required OPPs to dev_pm_domain_attach_list() pmdomain providers: - ti: Enable GENPD_FLAG_ACTIVE_WAKEUP flag for ti_sci PM domains - mediatek: Add support for MT6735 PM domains - mediatek: Use OF-specific regulator API to get power domain supply - qcom: Add support for the SM8750/SAR2130P/qcs615/qcs8300 rpmhpds pmdomain consumers: - Convert a couple of consumer drivers to *_pm_domain_attach|detach_list() opp core: - Rework and cleanup some code that manages required OPPs - Remove *_opp_attach|detach_genpd()" * tag 'pmdomain-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (25 commits) pmdomain: qcom: rpmhpd: Add rpmhpd support for SM8750 dt-bindings: power: qcom,rpmpd: document the SM8750 RPMh Power Domains pmdomain: imx: Use of_property_present() for non-boolean properties pmdomain: imx: gpcv2: replace dev_err() with dev_err_probe() pmdomain: ti-sci: Use scope based of_node_put() to simplify code. pmdomain: ti-sci: Add missing of_node_put() for args.np pmdomain: ti-sci: set the GENPD_FLAG_ACTIVE_WAKEUP flag for all PM domains pmdomain: mediatek: Add support for MT6735 pmdomain: qcom: rpmhpd: add support for SAR2130P dt-bindings: power: Add binding for MediaTek MT6735 power controller dt-bindings: power: rpmpd: Add SAR2130P compatible OPP: Drop redundant *_opp_attach|detach_genpd() cpufreq: qcom-nvmem: Convert to dev_pm_domain_attach|detach_list() media: venus: Convert into devm_pm_domain_attach_list() for OPP PM domain drm/tegra: gr3d: Convert into devm_pm_domain_attach_list() OPP: Drop redundant code in _link_required_opps() pmdomain: core: Set the required dev for a required OPP during genpd attach pmdomain: core: Manage the default required OPP from a separate function PM: domains: Support required OPPs in dev_pm_domain_attach_list() OPP: Rework _set_required_devs() to manage a single device per call ...	2024-11-20 12:44:59 -08:00
Linus Torvalds	131561f2ca	gpio updates for v6.13-rc1 ... GPIOLIB core: - use the new mem_is_zero() instead of memchr_inv(s, 0, n) - don't store debounce period twice needlessly - clean-up debugfs handling - remove leftover comments referring to no longer used spinlocks - unduplicate some operations like SRCU locks and initializing GPIO descriptors - constify the sysfs class struct - use lock guards in GPIO sysfs code - update GPIO uAPI internal flags all at once atomically for consistency with other places - modify the behavior of the sysfs interface by no longer exporting lines that are named inside the driver code or board files with the sysfs links bearing the line names as this has for many years been largely unused due to the prevalence of DT, ACPI and firmware nodes over board files and made the API inconsistent - for GPIO interrupt providers: free irqs that are still requested by users when removing the chip GPIO uAPI: - notify user-space about changes to GPIO lines' state (requested, released, reconfigured) triggered from the kernel as well (until now we'd only do this for changes triggered from user-space) - to that end: modify the internal workings of the notification mechanism by switching to an atomic notifier which allows us to send events from atomic context - also to that end store the debounce period in the GPIO descriptor struct and not in the character device context struct - while at it, also cover the corner-case of users introducing changes over sysfs while others watch them via the character device - don't report GPIO lines requested as interrupts as "used" to user-space as it can still request them as GPIOs New drivers: - add a driver for the GPIO functionality of the MFD Congatec Board Controller - add a driver for the PolarFire GPIO controller - add a driver supporting the GPIOs on FTDI FT2232H Driver improvements: - use generic device property accessors instead of OF-specific ones across many GPIO drivers (mpc8xxx, vf610, eic-sprd, davinci, ts4900, xilinx, mvebu) - use devres helpers to simplify error paths and either shrink or entirely remove the driver's remove() callback (grgpio, amdpt, menz127, max730x, ftgpio010, 74x164, ljca) - use helper variables to store the address of pdev->dev and avoid some line-breaks - use device_for_each_child_node_scoped() to avoid having to put the fwnode on breaks or errors (gpio-sim, gpio-dwapb, gpiolib-acpi) - use a scoped bitmap to simplify the code and drop goto labels in gpio-aggregator - drop unneeded Kconfig dependencies on OF_GPIO (grgpio, mveby, xilinx) - add support for new models to gpio-aspeed, gpio-rockchip and gpio-dwapb - clean-up ACPI handling and some other bits in gpio-xgene-sb - replace deprecated PCI functions in pcie-idio-24 and pci-idio-16 - allow to build davinci and mvebu drivers with COMPILE_TEST=y - remove dead code in gpio-mb86s7x - switch back to using platform_driver::remove() (after the conversion to remove_new()) across the GPIO drivers - remove remaining uses of GPIOF_ACTIVE_LOW across the tree and drop this deprecated symbol - convert the gpio-altera driver to no longer pull in the deprecated legacy-of-mm-gpiochip.h header - use of_property_present() instead of of_property_read_bool() in gpiolib-of and gpio-rockchip - allow to build the tegra186 driver on Tegra234 platforms in Kconfig Late fixes: - add a missing return value check after devm_kasprintf() to gpio-grgpio DT bindings: - document the ngpios property of gpio-mmio - add support for a new aspeed model - fix the example for st,nomadik-gpio Other: - kernel doc and comments tweaks - fix typos in TODO - reorder headers alphabetically in some drivers - fix incorrect format specifiers in gpio tools -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmc7INQACgkQEacuoBRx 13Kotg/8DDkhZ01Qc2uR817DjCdbalS0TDr4FYn/XusyeBEgNgQDm/TcfmIMiU4M Dazb7pOXfEc4VJqPTSpvqsTwTyMLN1pi58ZXZZA760rf8O8O+8c/cogVk36QK+IB 3LX/w7JFFME6cC3kZ+mV3a6Cdxb4UIQdv1rWtLX8MjCiJ5+ax33VS0pe67n8sOft A6LeYwFr1ngk9NDg+OrFzExMTCGqk4aUYWiLd8ki3bw5ZMYzLwuenWLONQo3HOP5 QuWQV+wF913mjB53omiZ8heJ7hN3ez071W4rXXPGXn5sAGipqJKWk6Nvx1wRZapD d+6XozBLGNEIcPvWJAWDfxnHmEjVpFyhavc9Id569DcQ0WVLm+CFPkNmp4mgOoOB k8f6R2CA2lheIKTRUk/Lt+Cu2+Za/07bM/WsxL6x/oCXZwL6NA5P+8VoNcBCDKrF PVUz7Jad6FVHkxySqwX4clHLW173pqyG47RJ7KxVv7g6g+YNW0WCM7crS+czRWIq KUT9sumw1dEFlYZ9IGZTuP/Pvur8f17powkS8VuYJ02N1yq3OhQZb52NX8stsmkW P6CsdZe9KRoGQUJp9nYVE5j09oz1gqqdbLdn4Byqg6G50w2U1mLNaWE1rtWLtcTx h7npUNOaX44JafnClFJvv1R9ovkuzgTaymEL4qo3QB6COHdvjlA= =ON7q -----END PGP SIGNATURE----- Merge tag 'gpio-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "Three new drivers, support for some new models in existing ones and lots of various tweaks and improvements across the board (switching to using recommended APIs, code shrink and simplification, etc.). Also a new feature in the character device uAPI where we now notify the user-space about changes triggered by in-kernel users as well, not only when they were done by other user-space agents. Summary: GPIOLIB core: - use the new mem_is_zero() instead of memchr_inv(s, 0, n) - don't store debounce period twice needlessly - clean-up debugfs handling - remove leftover comments referring to no longer used spinlocks - unduplicate some operations like SRCU locks and initializing GPIO descriptors - constify the sysfs class struct - use lock guards in GPIO sysfs code - update GPIO uAPI internal flags all at once atomically for consistency with other places - modify the behavior of the sysfs interface by no longer exporting lines that are named inside the driver code or board files with the sysfs links bearing the line names as this has for many years been largely unused due to the prevalence of DT, ACPI and firmware nodes over board files and made the API inconsistent - for GPIO interrupt providers: free irqs that are still requested by users when removing the chip GPIO uAPI: - notify user-space about changes to GPIO lines' state (requested, released, reconfigured) triggered from the kernel as well (until now we'd only do this for changes triggered from user-space) - to that end: modify the internal workings of the notification mechanism by switching to an atomic notifier which allows us to send events from atomic context - also to that end store the debounce period in the GPIO descriptor struct and not in the character device context struct - while at it, also cover the corner-case of users introducing changes over sysfs while others watch them via the character device - don't report GPIO lines requested as interrupts as "used" to user-space as it can still request them as GPIOs New drivers: - GPIO part of the MFD Congatec Board Controller - PolarFire GPIO controller - GPIOs on FTDI FT2232H Driver improvements: - use generic device property accessors instead of OF-specific ones across many GPIO drivers (mpc8xxx, vf610, eic-sprd, davinci, ts4900, xilinx, mvebu) - use devres helpers to simplify error paths and either shrink or entirely remove the driver's remove() callback (grgpio, amdpt, menz127, max730x, ftgpio010, 74x164, ljca) - use helper variables to store the address of pdev->dev and avoid some line-breaks - use device_for_each_child_node_scoped() to avoid having to put the fwnode on breaks or errors (gpio-sim, gpio-dwapb, gpiolib-acpi) - use a scoped bitmap to simplify the code and drop goto labels in gpio-aggregator - drop unneeded Kconfig dependencies on OF_GPIO (grgpio, mveby, xilinx) - add support for new models to gpio-aspeed, gpio-rockchip and gpio-dwapb - clean-up ACPI handling and some other bits in gpio-xgene-sb - replace deprecated PCI functions in pcie-idio-24 and pci-idio-16 - allow to build davinci and mvebu drivers with COMPILE_TEST=y - remove dead code in gpio-mb86s7x - switch back to using platform_driver::remove() (after the conversion to remove_new()) across the GPIO drivers - remove remaining uses of GPIOF_ACTIVE_LOW across the tree and drop this deprecated symbol - convert the gpio-altera driver to no longer pull in the deprecated legacy-of-mm-gpiochip.h header - use of_property_present() instead of of_property_read_bool() in gpiolib-of and gpio-rockchip - allow to build the tegra186 driver on Tegra234 platforms in Kconfig Late fixes: - add a missing return value check after devm_kasprintf() to gpio-grgpio DT bindings: - document the ngpios property of gpio-mmio - add support for a new aspeed model - fix the example for st,nomadik-gpio Other: - kernel doc and comments tweaks - fix typos in TODO - reorder headers alphabetically in some drivers - fix incorrect format specifiers in gpio tools" * tag 'gpio-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (98 commits) gpio: tegra186: Allow to enable driver on Tegra234 gpio: grgpio: Add NULL check in grgpio_probe tools: gpio: Fix several incorrect format specifiers gpio: mpfs: add CoreGPIO support gpio: rockchip: support new version GPIO gpio: rockchip: change the GPIO version judgment logic gpio: rockchip: explan the format of the GPIO version ID gpiolib: cdev: use !mem_is_zero() instead of memchr_inv(s, 0, n) MAINTAINERS: add gpio driver to PolarFire entry gpio: Get rid of GPIOF_ACTIVE_LOW USB: gadget: pxa27x_udc: Avoid using GPIOF_ACTIVE_LOW pcmcia: soc_common: Avoid using GPIOF_ACTIVE_LOW leds: gpio: Avoid using GPIOF_ACTIVE_LOW Input: gpio_keys_polled - avoid using GPIOF_ACTIVE_LOW Input: gpio_keys - avoid using GPIOF_ACTIVE_LOW gpio: Use of_property_present() for non-boolean properties gpio: mpfs: add polarfire soc gpio support gpio: altera: Drop legacy-of-mm-gpiochip.h header gpio: pcie-idio-24: Replace deprecated PCI functions gpio: pci-idio-16: Replace deprecated PCI functions ...	2024-11-20 12:37:06 -08:00
Linus Torvalds	7d75606665	pwm: Changes for v6.13-rc1 ... This pull request prominently contains a new abstraction for PWM waveforms that is more expressive that the legacy one. Compared to the old abstraction it contains a duty_offset member instead of polarity. This new abstraction is already used in an ADC driver merged into the iio tree. So I expect you will get a part of this tree also via the iio pull request for 6.13-rc1 (tag pwm/duty_offset-for-6.13-rc1). Otherwise it's the usual collection of fixes, cleanups and dt doc updates. This time around thanks go to Andy Shevchenko, Clark Wang, Conor Dooley, David Lechner, Dimitri Fedrau, Frank Li, Jun Li, Kelvin Zhang, Krzysztof Kozlowski, Nuno Sa, Shen Lichuan and Trevor Gamblin for code contributions, testing and review. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmc7DoAACgkQj4D7WH0S /k5tEgf/QJY8mAPPZR45dDo+GdUnZAaV85sseOezeApjB6kMYXKsKWoDC0uQ9m40 t7zkR8rXCk84rYSg4fGpcWL12v03n8cXmABkJUsqkUkLCcU/pifKzxanC25IWMH1 DGCW8tev4/NSe2ud9kLmFR/p85aioIW47Az3QH096Wv+Y5ij3v5e8PHBIaSiWHlb gfQI1XWerHSbAZexF132zGZOD/TBWb6djAQKACh5KWBPWB54zK3n3ngxoOCSMKSh Li8nfVyy32mPurLfTqaTaAHg7uGrcCGOVhqnXSQiuUayMlV/T7FX/uwfF/X/YKFm iqIPoYeUhLHmHJkHLACtPzUajkTJbg== =3d9l -----END PGP SIGNATURE----- Merge tag 'pwm/for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux Pull pwm updates from Uwe Kleine-König: "This contains a new abstraction for PWM waveforms that is more expressive that the legacy one. Compared to the old abstraction it contains a duty_offset member instead of polarity. This new abstraction is already used in an ADC driver merged into the iio tree. The new API requires changes to the lowlevel drivers. For now there are two drivers that are converted to the new API (axi-pwmgen and stm32). Converted drivers continue to work with the old API. Drivers not yet converted only work with the older API. Otherwise it's the usual collection of fixes, cleanups and dt doc updates. This time around thanks go to Andy Shevchenko, Clark Wang, Conor Dooley, David Lechner, Dimitri Fedrau, Frank Li, Jun Li, Kelvin Zhang, Krzysztof Kozlowski, Nuno Sa, Shen Lichuan and Trevor Gamblin for code contributions, testing and review" * tag 'pwm/for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: pwm: Assume a disabled PWM to emit a constant inactive output pwm: core: export pwm_get_state_hw() pwm: core: use device_match_name() instead of strcmp(dev_name(... dt-bindings: pwm: adi,axi-pwmgen: Increase #pwm-cells to 3 pwm: imx27: Use clk_bulk_*() API to simplify clock handling pwm: imx27: Workaround of the pwm output bug when decrease the duty cycle pwm: axi-pwmgen: Enable FORCE_ALIGN by default pwm: axi-pwmgen: Rename 0x10 register dt-bindings: pwm: amlogic: Document C3 PWM pwm: axi-pwmgen: Create a dedicated function for getting driver data from a chip pwm: atmel-tcb: Use min() macro pwm: stm32: Fix error checking for a regmap_read() call pwm: Add kernel doc for members added to pwm_ops recently pwm: Reorder symbols in core.c pwm: stm32: Implementation of the waveform callbacks pwm: axi-pwmgen: Implementation of the waveform callbacks pwm: Add tracing for waveform callbacks pwm: Provide new consumer API functions for waveforms pwm: New abstraction for PWM waveforms pwm: Add more locking	2024-11-20 12:34:22 -08:00
Linus Torvalds	f2ef39727a	spi: Updates for v6.13 ... The only real core work we've got this time around is the completion of the transition to the new host/target naming for the core APIs, Kconfig still needs doing but that's a lot less invasive. Otherwise the big changes are the new drivers that have been added: - Completion of the conversion to spi_alloc_host()/_target() and removal of the old naming. - Cleanups for Rockchip drivers, these brought in a new logging helper in the driver core for warnings during probe. - Support for configuration of the word delay via spidev_test. - Support for AMD HID2 controllers, Apple SPI controller and Realtek SPI-NAND controllers. The Rockchip cleanups -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmc7QdQACgkQJNaLcl1U h9A7KAf+Od8ORLheHKrokFYWEW1zuiR45EjqWylLk835d3TQn/VfLOouRDhOPKLw wmxy5PjjvI+CHa9JY4TXY6iRTCc8By6fkwRWFZN5KApSC2NQriWiqgTSItFfYiLv yUthZjfRhbfSpf6E/0hq4axpfn+6W/MIWUg7Ag08IEU+GhDd+um8gdpBKsP1BAJF s34Fn3oJNoze0Wwcq5tZ91S1MsP+2vGFGIGC2HA7G2GAXjGFqBZUnIL+zjC1US3j XILAoy4Vx4J0Nn+f+zdGL2m5cm6O49ztaKqUxamVFigwM4va5OSOEpcnFMEPZ8HY 013dIg7tiayUTOTcByCpzfMDWuzHig== =jc6e -----END PGP SIGNATURE----- Merge tag 'spi-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The only real core work we've got this time around is the completion of the transition to the new host/target naming for the core APIs, Kconfig still needs doing but that's a lot less invasive. Otherwise the big changes are the new drivers that have been added: - Completion of the conversion to spi_alloc_host()/_target() and removal of the old naming. - Cleanups for Rockchip drivers, these brought in a new logging helper in the driver core for warnings during probe. - Support for configuration of the word delay via spidev_test. - Support for AMD HID2 controllers, Apple SPI controller and Realtek SPI-NAND controllers" * tag 'spi-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (58 commits) spi: imx: support word delay spi: imx: pass struct spi_transfer to prepare_transfer() spi: cs42l43: Add GPIO speaker id support to the bridge configuration spi: Delete useless checks spi: apple: Remove unnecessary .owner for apple_spi_driver spi: spidev_test: add support for word delay spi: apple: Add driver for Apple SPI controller spi: dt-bindings: apple,spi: Add binding for Apple SPI controllers spi: Use of_property_present() for non-boolean properties spi: zynqmp-gqspi: Undo runtime PM changes at driver exit time​ spi: spi-mem: rtl-snand: Correctly handle DMA transfers spi: tegra210-quad: Avoid shift-out-of-bounds spi: axi-spi-engine: Emit trace events for spi transfers dt-bindings: spi: sprd,sc9860-spi: convert to YAML spi: Replace deprecated PCI functions spi: dt-bindings: samsung: Add a compatible for samsung,exynos8895-spi spi: spi-mem: Add Realtek SPI-NAND controller dt-bindings: spi: Add realtek,rtl9301-snand spi: make class structs const spi: dt-bindings: brcm,bcm2835-aux-spi: Convert to dtschema ...	2024-11-20 12:23:06 -08:00
Linus Torvalds	4bd37a902a	regulator: Updates for v6.13 ... This was a quite quiet release for regulators on the drivers front, but we do have two small but useful core improvements: - Improve handling of cases where DT platforms specify both DT and init_data based configuration for a single regulator. - A helper of_regulator_get_optional() to simplify writing generic bindings for regulator consumers in subsystems. There's also some YAML conversions for the DT bindings which are a big part of the diffstat. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmc7O2AACgkQJNaLcl1U h9C3Zwf/ZfnNpSjd6hWtsPQROmOXNvVJDvXeyC6ZWQPjBU31VAFt+6rtk/xMVTIp cxaHG3PzeYkIk1VTm6yO5m3/kalIt4ECsJf62sfNNoltRcl0sJExt6ewKF6QjCN7 9OOAANJIWliApPj1ZQ+IIvddsF2Q0IqyioDLX+suGdNmNaZx4KnLP7dIAcluj3/d w+pC/CbrrUy2ScFgxLUm3dH16nV8hYm/F9f5Dsob9AV7IpMN0suMwbAd6uq2+KZT lLUw+kpkASetifhAfCjUGj8PIF+lMwW4WsuWgu4I0qiA9+FRDEyb6f0LQahs3d2G NO98rrcS9kVYaJ1z83KuMHeYBI44sQ== =AihX -----END PGP SIGNATURE----- Merge tag 'regulator-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "This was a quite quiet release for regulators on the drivers front, but we do have two small but useful core improvements: - Improve handling of cases where DT platforms specify both DT and init_data based configuration for a single regulator. - A helper of_regulator_get_optional() to simplify writing generic bindings for regulator consumers in subsystems. There's also some YAML conversions for the DT bindings which are a big part of the diffstat" * tag 'regulator-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: dt-bindings: qcom,rpmh: Correct PM8550VE supplies regulator: Switch back to struct platform_driver::remove() regulator: doc: remove documentation comment for regulator_init regulator: doc: add missing documentation for init_cb regulator: rk808: Restrict DVS GPIOs to the RK808 variant only regulator: rk808: Use dev_err_probe() in the probe path regulator: rk808: Perform trivial code cleanups regulator: dt-bindings: qcom,qca6390-pmu: add more properties for wcn6855 regulator: dt-bindings: lltc,ltc3676: convert to YAML regulator: core: Use fsleep() to get best sleep mechanism regulator: core: remove machine init callback from config regulator: core: add callback to perform runtime init regulator: core: do not silently ignore provided init_data regulator: max5970: Drop unused structs regulator: dt-bindings: vctrl-regulator: convert to YAML regulator: qcom-smd: make smd_vreg_rpm static regulator: Call of_node_put() only once in rzg2l_usb_vbus_regulator_probe() regulator: isl6271a: Drop explicit initialization of struct i2c_device_id::driver_data to 0 regulator: Add devres version of of_regulator_get_optional() regulator: Add of_regulator_get_optional() for pure DT regulator lookup	2024-11-20 12:18:50 -08:00
Linus Torvalds	bf9aa14fc5	A rather large update for timekeeping and timers: ... - The final step to get rid of auto-rearming posix-timers posix-timers are currently auto-rearmed by the kernel when the signal of the timer is ignored so that the timer signal can be delivered once the corresponding signal is unignored. This requires to throttle the timer to prevent a DoS by small intervals and keeps the system pointlessly out of low power states for no value. This is a long standing non-trivial problem due to the lock order of posix-timer lock and the sighand lock along with life time issues as the timer and the sigqueue have different life time rules. Cure this by: * Embedding the sigqueue into the timer struct to have the same life time rules. Aside of that this also avoids the lookup of the timer in the signal delivery and rearm path as it's just a always valid container_of() now. * Queuing ignored timer signals onto a seperate ignored list. * Moving queued timer signals onto the ignored list when the signal is switched to SIG_IGN before it could be delivered. * Walking the ignored list when SIG_IGN is lifted and requeue the signals to the actual signal lists. This allows the signal delivery code to rearm the timer. This also required to consolidate the signal delivery rules so they are consistent across all situations. With that all self test scenarios finally succeed. - Core infrastructure for VFS multigrain timestamping This is required to allow the kernel to use coarse grained time stamps by default and switch to fine grained time stamps when inode attributes are actively observed via getattr(). These changes have been provided to the VFS tree as well, so that the VFS specific infrastructure could be built on top. - Cleanup and consolidation of the sleep() infrastructure * Move all sleep and timeout functions into one file * Rework udelay() and ndelay() into proper documented inline functions and replace the hardcoded magic numbers by proper defines. * Rework the fsleep() implementation to take the reality of the timer wheel granularity on different HZ values into account. Right now the boundaries are hard coded time ranges which fail to provide the requested accuracy on different HZ settings. * Update documentation for all sleep/timeout related functions and fix up stale documentation links all over the place * Fixup a few usage sites - Rework of timekeeping and adjtimex(2) to prepare for multiple PTP clocks A system can have multiple PTP clocks which are participating in seperate and independent PTP clock domains. So far the kernel only considers the PTP clock which is based on CLOCK TAI relevant as that's the clock which drives the timekeeping adjustments via the various user space daemons through adjtimex(2). The non TAI based clock domains are accessible via the file descriptor based posix clocks, but their usability is very limited. They can't be accessed fast as they always go all the way out to the hardware and they cannot be utilized in the kernel itself. As Time Sensitive Networking (TSN) gains traction it is required to provide fast user and kernel space access to these clocks. The approach taken is to utilize the timekeeping and adjtimex(2) infrastructure to provide this access in a similar way how the kernel provides access to clock MONOTONIC, REALTIME etc. Instead of creating a duplicated infrastructure this rework converts timekeeping and adjtimex(2) into generic functionality which operates on pointers to data structures instead of using static variables. This allows to provide time accessors and adjtimex(2) functionality for the independent PTP clocks in a subsequent step. - Consolidate hrtimer initialization hrtimers are set up by initializing the data structure and then seperately setting the callback function for historical reasons. That's an extra unnecessary step and makes Rust support less straight forward than it should be. Provide a new set of hrtimer_setup*() functions and convert the core code and a few usage sites of the less frequently used interfaces over. The bulk of the htimer_init() to hrtimer_setup() conversion is already prepared and scheduled for the next merge window. - Drivers: * Ensure that the global timekeeping clocksource is utilizing the cluster 0 timer on MIPS multi-cluster systems. Otherwise CPUs on different clusters use their cluster specific clocksource which is not guaranteed to be synchronized with other clusters. * Mostly boring cleanups, fixes, improvements and code movement -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmc7kPITHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoZKkD/9OUL6fOJrDUmOYBa4QVeMyfTef4EaL tvwIMM/29XQFeiq3xxCIn+EMnHjXn2lvIhYGQ7GKsbKYwvJ7ZBDpQb+UMhZ2nKI9 6D6BP6WomZohKeH2fZbJQAdqOi3KRYdvQdIsVZUexkqiaVPphRvOH9wOr45gHtZM EyMRSotPlQTDqcrbUejDMEO94GyjDCYXRsyATLxjmTzL/N4xD4NRIiotjM2vL/a9 8MuCgIhrKUEyYlFoOxxeokBsF3kk3/ez2jlG9b/N8VLH3SYIc2zgL58FBgWxlmgG bY71nVG3nUgEjxBd2dcXAVVqvb+5widk8p6O7xxOAQKTLMcJ4H0tQDkMnzBtUzvB DGAJDHAmAr0g+ja9O35Pkhunkh4HYFIbq0Il4d1HMKObhJV0JumcKuQVxrXycdm3 UZfq3seqHsZJQbPgCAhlFU0/2WWScocbee9bNebGT33KVwSp5FoVv89C/6Vjb+vV Gusc3thqrQuMAZW5zV8g4UcBAA/xH4PB0I+vHib+9XPZ4UQ7/6xKl2jE0kd5hX7n AAUeZvFNFqIsY+B6vz+Jx/yzyM7u5cuXq87pof5EHVFzv56lyTp4ToGcOGYRgKH5 JXeYV1OxGziSDrd5vbf9CzdWMzqMvTefXrHbWrjkjhNOe8E1A8O88RZ5uRKZhmSw hZZ4hdM9+3T7cg== =2VC6 -----END PGP SIGNATURE----- Merge tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "A rather large update for timekeeping and timers: - The final step to get rid of auto-rearming posix-timers posix-timers are currently auto-rearmed by the kernel when the signal of the timer is ignored so that the timer signal can be delivered once the corresponding signal is unignored. This requires to throttle the timer to prevent a DoS by small intervals and keeps the system pointlessly out of low power states for no value. This is a long standing non-trivial problem due to the lock order of posix-timer lock and the sighand lock along with life time issues as the timer and the sigqueue have different life time rules. Cure this by: - Embedding the sigqueue into the timer struct to have the same life time rules. Aside of that this also avoids the lookup of the timer in the signal delivery and rearm path as it's just a always valid container_of() now. - Queuing ignored timer signals onto a seperate ignored list. - Moving queued timer signals onto the ignored list when the signal is switched to SIG_IGN before it could be delivered. - Walking the ignored list when SIG_IGN is lifted and requeue the signals to the actual signal lists. This allows the signal delivery code to rearm the timer. This also required to consolidate the signal delivery rules so they are consistent across all situations. With that all self test scenarios finally succeed. - Core infrastructure for VFS multigrain timestamping This is required to allow the kernel to use coarse grained time stamps by default and switch to fine grained time stamps when inode attributes are actively observed via getattr(). These changes have been provided to the VFS tree as well, so that the VFS specific infrastructure could be built on top. - Cleanup and consolidation of the sleep() infrastructure - Move all sleep and timeout functions into one file - Rework udelay() and ndelay() into proper documented inline functions and replace the hardcoded magic numbers by proper defines. - Rework the fsleep() implementation to take the reality of the timer wheel granularity on different HZ values into account. Right now the boundaries are hard coded time ranges which fail to provide the requested accuracy on different HZ settings. - Update documentation for all sleep/timeout related functions and fix up stale documentation links all over the place - Fixup a few usage sites - Rework of timekeeping and adjtimex(2) to prepare for multiple PTP clocks A system can have multiple PTP clocks which are participating in seperate and independent PTP clock domains. So far the kernel only considers the PTP clock which is based on CLOCK TAI relevant as that's the clock which drives the timekeeping adjustments via the various user space daemons through adjtimex(2). The non TAI based clock domains are accessible via the file descriptor based posix clocks, but their usability is very limited. They can't be accessed fast as they always go all the way out to the hardware and they cannot be utilized in the kernel itself. As Time Sensitive Networking (TSN) gains traction it is required to provide fast user and kernel space access to these clocks. The approach taken is to utilize the timekeeping and adjtimex(2) infrastructure to provide this access in a similar way how the kernel provides access to clock MONOTONIC, REALTIME etc. Instead of creating a duplicated infrastructure this rework converts timekeeping and adjtimex(2) into generic functionality which operates on pointers to data structures instead of using static variables. This allows to provide time accessors and adjtimex(2) functionality for the independent PTP clocks in a subsequent step. - Consolidate hrtimer initialization hrtimers are set up by initializing the data structure and then seperately setting the callback function for historical reasons. That's an extra unnecessary step and makes Rust support less straight forward than it should be. Provide a new set of hrtimer_setup*() functions and convert the core code and a few usage sites of the less frequently used interfaces over. The bulk of the htimer_init() to hrtimer_setup() conversion is already prepared and scheduled for the next merge window. - Drivers: - Ensure that the global timekeeping clocksource is utilizing the cluster 0 timer on MIPS multi-cluster systems. Otherwise CPUs on different clusters use their cluster specific clocksource which is not guaranteed to be synchronized with other clusters. - Mostly boring cleanups, fixes, improvements and code movement" * tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits) posix-timers: Fix spurious warning on double enqueue versus do_exit() clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties clocksource/drivers/gpx: Remove redundant casts clocksource/drivers/timer-ti-dm: Fix child node refcount handling dt-bindings: timer: actions,owl-timer: convert to YAML clocksource/drivers/ralink: Add Ralink System Tick Counter driver clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource clocksource/drivers/timer-ti-dm: Don't fail probe if int not found clocksource/drivers:sp804: Make user selectable clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions hrtimers: Delete hrtimer_init_on_stack() alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack() io_uring: Switch to use hrtimer_setup_on_stack() sched/idle: Switch to use hrtimer_setup_on_stack() hrtimers: Delete hrtimer_init_sleeper_on_stack() wait: Switch to use hrtimer_setup_sleeper_on_stack() timers: Switch to use hrtimer_setup_sleeper_on_stack() net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack() futex: Switch to use hrtimer_setup_sleeper_on_stack() fs/aio: Switch to use hrtimer_setup_sleeper_on_stack() ...	2024-11-19 16:35:06 -08:00
Linus Torvalds	5c2b050848	A set of updates for the interrupt subsystem: ... - Tree wide: * Make nr_irqs static to the core code and provide accessor functions to remove existing and prevent future aliasing problems with local variables or function arguments of the same name. - Core code: * Prevent freeing an interrupt in the devres code which is not managed by devres in the first place. * Use seq_put_decimal_ull_width() for decimal values output in /proc/interrupts which increases performance significantly as it avoids parsing the format strings over and over. * Optimize raising the timer and hrtimer soft interrupts by using the 'set bit only' variants instead of the combined version which checks whether ksoftirqd should be woken up. The latter is a pointless exercise as both soft interrupts are raised in the context of the timer interrupt and therefore never wake up ksoftirqd. * Delegate timer/hrtimer soft interrupt processing to a dedicated thread on RT. Timer and hrtimer soft interrupts are always processed in ksoftirqd on RT enabled kernels. This can lead to high latencies when other soft interrupts are delegated to ksoftirqd as well. The separate thread allows to run them seperately under a RT scheduling policy to reduce the latency overhead. - Drivers: * New drivers or extensions of existing drivers to support Renesas RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt chips * Support for multi-cluster GICs on MIPS. MIPS CPUs can come with multiple CPU clusters, where each CPU cluster has its own GIC (Generic Interrupt Controller). This requires to access the GIC of a remote cluster through a redirect register block. This is encapsulated into a set of helper functions to keep the complexity out of the actual code paths which handle the GIC details. * Support for encrypted guests in the ARM GICV3 ITS driver The ITS page needs to be shared with the hypervisor and therefore must be decrypted. * Small cleanups and fixes all over the place -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmc7ggcTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoaf7D/9G6FgJXx/60zqnpnOr9Yx0hxjaI47x PFyCd3P05qyVMBYXfI99vrSKuVdMZXJ/fH5L83y+sOaTASyLTzg37igZycIDJzLI FnHh/m/+UA8k2aIC5VUiNAjne2RLaTZiRN15uEHFVjByC5Y+YTlCNUE4BBhg5RfQ hKmskeffWdtui3ou13CSNvbFn+pmqi4g6n1ysUuLhiwM2E5b1rZMprcCOnun/cGP IdUQsODNWTTv9eqPJez985M6A1x2SCGNv7Z73h58B9N0pBRPEC1xnhUnCJ1sA0cJ pnfde2C1lztEjYbwDngy0wgq0P6LINjQ5Ma2YY2F2hTMsXGJxGPDZm24/u5uR46x N/gsOQMXqw6f5yvbiS7Asx9WzR6ry8rJl70QRgTyozz7xxJTaiNm2HqVFe2wc+et Q/BzaKdhmUJj1GMZmqD2rrgwYeDcb4wWYNtwjM4PVHHxYlJVq0mEF1kLLS8YDyjf HuGPVqtSkt3E0+Br3FKcv5ltUQP8clXbudc6L1u98YBfNK12hW8L+c3YSvIiFoYM ZOAeANPM7VtQbP2Jg2q81Dd3CShImt5jqL2um+l8g7+mUE7l9gyuO/w/a5dQ57+b kx7mHHIW2zCeHrkZZbRUYzI2BJfMCCOVN4Ax5OZxTLnLsL9VEehy8NM8QYT4TS8R XmTOYW3U9XR3gw== =JqxC -----END PGP SIGNATURE----- Merge tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull interrupt subsystem updates from Thomas Gleixner: "Tree wide: - Make nr_irqs static to the core code and provide accessor functions to remove existing and prevent future aliasing problems with local variables or function arguments of the same name. Core code: - Prevent freeing an interrupt in the devres code which is not managed by devres in the first place. - Use seq_put_decimal_ull_width() for decimal values output in /proc/interrupts which increases performance significantly as it avoids parsing the format strings over and over. - Optimize raising the timer and hrtimer soft interrupts by using the 'set bit only' variants instead of the combined version which checks whether ksoftirqd should be woken up. The latter is a pointless exercise as both soft interrupts are raised in the context of the timer interrupt and therefore never wake up ksoftirqd. - Delegate timer/hrtimer soft interrupt processing to a dedicated thread on RT. Timer and hrtimer soft interrupts are always processed in ksoftirqd on RT enabled kernels. This can lead to high latencies when other soft interrupts are delegated to ksoftirqd as well. The separate thread allows to run them seperately under a RT scheduling policy to reduce the latency overhead. Drivers: - New drivers or extensions of existing drivers to support Renesas RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt chips - Support for multi-cluster GICs on MIPS. MIPS CPUs can come with multiple CPU clusters, where each CPU cluster has its own GIC (Generic Interrupt Controller). This requires to access the GIC of a remote cluster through a redirect register block. This is encapsulated into a set of helper functions to keep the complexity out of the actual code paths which handle the GIC details. - Support for encrypted guests in the ARM GICV3 ITS driver The ITS page needs to be shared with the hypervisor and therefore must be decrypted. - Small cleanups and fixes all over the place" * tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits) irqchip/riscv-aplic: Prevent crash when MSI domain is missing genirq/proc: Use seq_put_decimal_ull_width() for decimal values softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT. timers: Use __raise_softirq_irqoff() to raise the softirq. hrtimer: Use __raise_softirq_irqoff() to raise the softirq riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers irqchip: Add T-HEAD C900 ACLINT SSWI driver dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK irqchip/mips-gic: Prevent indirect access to clusters without CPU cores irqchip/mips-gic: Multi-cluster support irqchip/mips-gic: Setup defaults in each cluster irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic() irqchip/mips-gic: Replace open coded online CPU iterations genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show() genirq/devres: Don't free interrupt which is not managed by devres irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool() irqchip/aspeed-intc: Add AST27XX INTC support dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC ...	2024-11-19 15:54:19 -08:00
Rafael J. Wysocki	baf4ae8038	ARM cpufreq updates for 6.13 ... - Add virtual cpufreq driver for guest kernels (David Dai). - Minor cleanup to various cpufreq drivers (Andy Shevchenko, Dhruva Gole, Jie Zhan, Jinjie Ruan, Shuosheng Huang, Sibi Sankar, and Yuan Can). - Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check" (Colin Ian King). - Improve DT bindings for qcom-hw driver (Dmitry Baryshkov, Konrad Dybcio, and Nikunj Kela). -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEx73Crsp7f6M6scA70rkcPK6BEhwFAmc6wgAACgkQ0rkcPK6B Ehz2HA/9FvaDMmi4q1yt2CvkypN4XiaerUZBE+wBMgLDiGIOzx3X1YpiZwfH7LRR V+E7+63ZYH0bxfErG3M75x8YKvARB5WaiP+f+YYIFGnBiNdbG8WdooAy+gViE+AX Wiq4FNV2IqaQXceq1TCFMiwN8tn1gZO/axsWDiEUB+bTn11noJBkNa4I6TaGDH4X IwTVss5VBcP4fORmkTSnA/Epw6mtFIQfHPO3m5SbgBiB6NVK3+//ZAnHCYB23H34 X5f0BcTw0IxkHbSuASg8ZMgqHfnmduV8g8dAhhIMkh2Zci145nmcSdcBZk1G32NC ffYznTTwEVRGMQ9ku6j9FXrqUw0Bb8GEOKSNMoO0Tc+e0UmAP/xKYICH3lbLEfXo 3DWBDNu7wNjTpZ5OJwkFsRspCVZVBDi/bnBH+XN2ELzLIPiSMN2R+I480G5uNfMt iLy9Vzqpw7H6Z2OZiN9scUDZ/pgIC7T3ZjJLwy6XsBeWjM3/AwNPx1LYM5UNFl2P MEQs0EOXl1jxMEFG4jmr8iDT5dhgX0LM5zVq0kK/dQCtLtz9BqcVr3NV3bU4pLrx fldHqaxZXnCFqtXR3RHSodGdj1B3H+KhgeXki7qxtXAAzdydNFDZxA0Kxm7DHG0i onwB+b+J4TrEIwdAODZsjh4XYjKl/fLaIinHCkabQhOXUlQsgcg= =72Nq -----END PGP SIGNATURE----- Merge tag 'cpufreq-arm-updates-6.13' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Merge ARM cpufreq updates for 6.13 from Viresh Kumar: "- Add virtual cpufreq driver for guest kernels (David Dai). - Minor cleanup to various cpufreq drivers (Andy Shevchenko, Dhruva Gole, Jie Zhan, Jinjie Ruan, Shuosheng Huang, Sibi Sankar, and Yuan Can). - Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check" (Colin Ian King). - Improve DT bindings for qcom-hw driver (Dmitry Baryshkov, Konrad Dybcio, and Nikunj Kela)." * tag 'cpufreq-arm-updates-6.13' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: arm64: dts: qcom: sc8180x: Add a SoC-specific compatible to cpufreq-hw dt-bindings: cpufreq: cpufreq-qcom-hw: Add SC8180X compatible cpufreq: sun50i: add a100 cpufreq support cpufreq: mediatek-hw: Fix wrong return value in mtk_cpufreq_get_cpu_power() cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_power() cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_cost() cpufreq: loongson3: Check for error code from devm_mutex_init() call cpufreq: scmi: Fix cleanup path when boost enablement fails cpufreq: CPPC: Fix possible null-ptr-deref for cppc_get_cpu_cost() cpufreq: CPPC: Fix possible null-ptr-deref for cpufreq_cpu_get_raw() Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check" dt-bindings: cpufreq: cpufreq-qcom-hw: Add SAR2130P compatible cpufreq: add virtual-cpufreq driver dt-bindings: cpufreq: add virtual cpufreq device cpufreq: loongson2: Unregister platform_driver on failure cpufreq: ti-cpufreq: Remove revision offsets in AM62 family cpufreq: ti-cpufreq: Allow backward compatibility for efuse syscon cppc_cpufreq: Remove HiSilicon CPPC workaround cppc_cpufreq: Use desired perf if feedback ctrs are 0 or unchanged dt-bindings: cpufreq: qcom-hw: document support for SA8255p	2024-11-19 21:35:14 +01:00
Linus Torvalds	77286b868f	- Add support for Bluefield-2 SOCs to bluefield_edac ... - Add support for Intel Panther Lake-H to igen6_edac - Add polling support to igen6_edac as some Intel M100 chips have trouble with error interrupts - Add Kaby Lake-S support to ie31200_edac - Fix memory source detection in the SKX common module which is used by a couple of Intel EDAC drivers - Add support for the NXP i.MX9 memory controller to fsl_edac - The usual fixes and cleanups all over the place -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmc7KAcACgkQEsHwGGHe VUpzxQ/6Ahr49jXu58M69UQSW3DdzEU+5NNxmUrZdRrdW/oCJXGpuRdmdFWzvWTj HtfCS7GmaSIUPjLaNisyKdCaZxWysBqyLe0Vaexw5nuyybF5TzdYWETqFef1ij9z Wqq1j5LPrz+9BiqFqkpbgzo6Y6Ubsv2RKuZu+1GkMT2zRrgEJuJgHi6RlJ8vqj// 7FePl3CFQ3HDdTom0/L/gsMqSObj7HEq9cbalIjIYw/GRVkZol21vDwKrUkM7rpF tfrN1qq3NuJyqM7Du2jw2VtXDomrQ/ZkABNXCbtbczf8trLYUHR5QqIQjxy2ZFts jMKIbdCNAfgiqai6bpmm4QHWAIAV3L5DX7OuPmbpQeAzSmOqSEqNbnLbvA1e472f 5upQH4OLOsHgbnnFTQJ7vcU5jHf41DSauMCFp60h2hyn5RIiVY5ASxRfQ3xdh/+a hp2N+hB/y46AjXAidsGhAuUw8nt44MN2x1gtiUfbtMIx6gTewtuu0SbwOb85JW16 glhD8vxRGTUWoQit+Nh3u/P/rLSGkUJK87mfPr6O/95lleYy5hOizK2jGDbDWkA+ zOnNXnSWKK/WM+B9qnJnU1sCC7vT3j7cTaDXB1XS2MtcJbArkNC0FOd6xD81PoGh MhfWBAKpirXQEomFqpVziDa2wlaUnZrv7/4GGmaBRO401O9iaE4= =C3dY -----END PGP SIGNATURE----- Merge tag 'edac_updates_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC updates from Borislav Petkov: - Add support for Bluefield-2 SOCs to bluefield_edac - Add support for Intel Panther Lake-H to igen6_edac - Add polling support to igen6_edac as some Intel M100 chips have trouble with error interrupts - Add Kaby Lake-S support to ie31200_edac - Fix memory source detection in the SKX common module which is used by a couple of Intel EDAC drivers - Add support for the NXP i.MX9 memory controller to fsl_edac - The usual fixes and cleanups all over the place * tag 'edac_updates_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/igen6: Add polling support EDAC/igen6: Initialize edac_op_state according to the configuration data EDAC/igen6: Avoid segmentation fault on module unload EDAC/ie31200: Add Kaby Lake-S dual-core host bridge ID MAINTAINERS: Change FSL DDR EDAC maintainership EDAC/{skx_common,i10nm}: Fix incorrect far-memory error source indicator EDAC/skx_common: Differentiate memory error sources EDAC/fsl_ddr: Add support for i.MX9 DDR controller dt-bindings: memory: fsl: Add compatible string nxp,imx9-memory-controller EDAC/fsl_ddr: Fix bad bit shift operations EDAC/fsl_ddr: Move global variables into struct fsl_mc_pdata EDAC/fsl_ddr: Pass down fsl_mc_pdata in ddr_in32() and ddr_out32() RAS/AMD/ATL: Add debug prints for DF register reads EDAC/bluefield: Use Arm SMC for EMI access on BlueField-2 EDAC/bluefield: Fix potential integer overflow EDAC/igen6: Add Intel Panther Lake-H SoCs support	2024-11-19 12:00:10 -08:00
Linus Torvalds	2b5d5f23d4	hmon updates for v6.13-rc1 ... * New drivers - ISL28022 power monitor - Nuvoton NCT7363Y * Added support for new chips to existing drivers - The tmp180 driver now supports NXP p3t1085, including its I3C mode - The ina2xx driver now supports SY24655 and INA260 - The amc6821 driver now supports tsd,mule * Other notable improvements - The sht4x driver now supports the chip heater - The pmbus/isl68137 driver now supports a voltage divider on Vout - The cros_ec driver registers with the thermal framework - The pmbus/ltc2978 driver now supports LTC7841 - The PMBus core now allow drivers to override WRITE_PROTECT * Various other minor improvements and cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEiHPvMQj9QTOCiqgVyx8mb86fmYEFAmc6tlAACgkQyx8mb86f mYEmThAAi85J4hUepnrpfKwzqzTgXhU3Y1ih7qWyIK0ErI5tjmYiCR3PHHd7jNb0 A5STfbpRkomvepQq9H79lv5EiOMFvudYLj2QuxFbSchz0J2XqXtg2RxUi9AK0/SE b+KLRjNNNHc2J2tDrLj14ZJJxMbqx35kx2x6TDGI+zoBhQ0XwEWkbtNuXipSpHQ8 OkTjbtGKlQrjtc7fJ/fWGlTDeVS2LWtCbJhybcL47IkPeIBQH/FIhoEnnKqj9/EV KROuVAIoAYK9r+w7ZDfp2iBpR0gOaWZ5I2w2cCufsO9pFEuMIeVDgfFP2XGLBXEi NlVlMMyk6X7XqvnHYmun6r9chuPtFc9+Rr7SnJkVaNviY7BmRcuWk1BGxA4GIAIR 6F3sBxlXdisnjVkYd1ENhCGlso/fXQizKUro3KZka0sXEnjxA+SE0dzIK8d77kip P6Mjg3hC6DZlA0eIlnbCWasu0gra4duVTpGTOcbfZQHN+50Fi4va9w2+1UDfIPnn f2gIUubtzrWZqKAPnN6ckIE7BQubsPukx7Zef0wgDRpxOgCBrKeQVX8LYtXQfkda G+LkSk1N1bUIpTbzGQPg7YLbVCQPQYqaSryFPL2lQtfEY58Tgt+EMCKSROmXMBOV tk9uDaN8OjXdYmU90jcHJR7v1WDkLRkRV0fsh6eFUpc8gQDiY+k= =BG/M -----END PGP SIGNATURE----- Merge tag 'hwmon-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hmon updates from Guenter Roeck: "New drivers: - ISL28022 power monitor - Nuvoton NCT7363Y Added support for new chips to existing drivers: - The tmp180 driver now supports NXP p3t1085, including its I3C mode - The ina2xx driver now supports SY24655 and INA260 - The amc6821 driver now supports tsd,mule Other notable improvements: - The sht4x driver now supports the chip heater - The pmbus/isl68137 driver now supports a voltage divider on Vout - The cros_ec driver registers with the thermal framework - The pmbus/ltc2978 driver now supports LTC7841 - The PMBus core now allow drivers to override WRITE_PROTECT Various other minor improvements and cleanups" * tag 'hwmon-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (51 commits) hwmon: (pmbus/isl68137) add support for voltage divider on Vout dt-bindings: hwmon: isl68137: add bindings to support voltage dividers hwmon: tmp108: fix I3C dependency hwmon: (cros_ec) register thermal sensors to thermal framework hwmon: (tmp108) Add support for I3C device hwmon: (tmp108) Add helper function tmp108_common_probe() to prepare I3C support hwmon: (acpi_power_meter) Fix fail to load module on platform without _PMD method hwmon: (nct6775-core) Fix overflows seen when writing limit attributes hwmon: (pwm-fan) Introduce start from stopped state handling dt-bindings: hwmon: pwm-fan: Document start from stopped state properties hwmon: (tmp108) Add NXP p3t1085 support dt-bindings: hwmon: ti,tmp108: Add nxp,p3t1085 compatible string hwmon: (sch5627, max31827) Fix typos in driver documentation hwmon: (jc42) Drop of_match_ptr() protection hwmon: (f71882fg) Fix grammar in fan speed trip points explanation dt-bindings: hwmon: pmbus: add ti tps25990 support hwmon: (pmbus/core) clear faults after setting smbalert mask hwmon: (pmbus/core) allow drivers to override WRITE_PROTECT hwmon: (pmbus) add documentation for existing flags hwmon: (ina226) Add support for SY24655 ...	2024-11-19 11:23:52 -08:00
Linus Torvalds	02b2f1a7b8	This update includes the following changes: ... API: - Add sig driver API. - Remove signing/verification from akcipher API. - Move crypto_simd_disabled_for_test to lib/crypto. - Add WARN_ON for return values from driver that indicates memory corruption. Algorithms: - Provide crc32-arch and crc32c-arch through Crypto API. - Optimise crc32c code size on x86. - Optimise crct10dif on arm/arm64. - Optimise p10-aes-gcm on powerpc. - Optimise aegis128 on x86. - Output full sample from test interface in jitter RNG. - Retry without padata when it fails in pcrypt. Drivers: - Add support for Airoha EN7581 TRNG. - Add support for STM32MP25x platforms in stm32. - Enable iproc-r200 RNG driver on BCMBCA. - Add Broadcom BCM74110 RNG driver. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmc6sQsACgkQxycdCkmx i6dfHxAAnkI65TE6agZq9DlkEU4ZqOsxxdk0MsGIhbCUTxW3KENzu9vtKjnvg9T/ Ou0d2J49ny87Y4zaA59Wf/Q1+gg5YSQR5kelonpfrPLkCkJjr72HZpyCHv8TTzEC uHHoVj9cnPIF5/yfiqQsrWT1ACip9vn+slyVPaMJV1qR6gnvnSALtsg4e/vKHkn7 ZMaf2pZ2ROYXdB02nMK5KQcCrxD64MQle/yQepY44eYjnT+XclkqPdi6o1nUSpj/ RFAeY0jFSTu0pj3DqT48TnU/LiiNLlFOZrGjCdEySoac63vmTtKqfYDmrRaFz4hB sucxbgJ3xnnYseRijtfXnxaD/IkDJln+ipGNQKAZLfOVMDCTxPdYGmOpobMTXMS+ 0sY0eAHgqr23P9pOp+sOzcAEFIqg6llAYQVWx3Zl4vpXBUuxzg6AqmHnPicnck7y Lw1cJhQxij2De3dG2ZL/0dgQxMjGN/YfCM8SSg6l+Xn3j4j47rqJNH2ZsmXtbJ2n kTkmemmWdgRR1IvgQQGsvyKs9ThkcEDW+IzW26SUv3Clvru2NSkX4ZPHbezZQf+D R0wMZsW3Fw7Zymerz1GIBSqdLnsyFWtIAjukDpOR6ordPgOBeDt76v6tw5vL2/II KYoeN1pdEEecwuhAsEvCryT5ZG4noBeNirf/ElWAfEybgcXiTks= =T8pa -----END PGP SIGNATURE----- Merge tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add sig driver API - Remove signing/verification from akcipher API - Move crypto_simd_disabled_for_test to lib/crypto - Add WARN_ON for return values from driver that indicates memory corruption Algorithms: - Provide crc32-arch and crc32c-arch through Crypto API - Optimise crc32c code size on x86 - Optimise crct10dif on arm/arm64 - Optimise p10-aes-gcm on powerpc - Optimise aegis128 on x86 - Output full sample from test interface in jitter RNG - Retry without padata when it fails in pcrypt Drivers: - Add support for Airoha EN7581 TRNG - Add support for STM32MP25x platforms in stm32 - Enable iproc-r200 RNG driver on BCMBCA - Add Broadcom BCM74110 RNG driver" * tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (112 commits) crypto: marvell/cesa - fix uninit value for struct mv_cesa_op_ctx crypto: cavium - Fix an error handling path in cpt_ucode_load_fw() crypto: aesni - Move back to module_init crypto: lib/mpi - Export mpi_set_bit crypto: aes-gcm-p10 - Use the correct bit to test for P10 hwrng: amd - remove reference to removed PPC_MAPLE config crypto: arm/crct10dif - Implement plain NEON variant crypto: arm/crct10dif - Macroify PMULL asm code crypto: arm/crct10dif - Use existing mov_l macro instead of __adrl crypto: arm64/crct10dif - Remove remaining 64x64 PMULL fallback code crypto: arm64/crct10dif - Use faster 16x64 bit polynomial multiply crypto: arm64/crct10dif - Remove obsolete chunking logic crypto: bcm - add error check in the ahash_hmac_init function crypto: caam - add error check to caam_rsa_set_priv_key_form hwrng: bcm74110 - Add Broadcom BCM74110 RNG driver dt-bindings: rng: add binding for BCM74110 RNG padata: Clean up in padata_do_multithreaded() crypto: inside-secure - Fix the return value of safexcel_xcbcmac_cra_init() crypto: qat - Fix missing destroy_workqueue in adf_init_aer() crypto: rsassa-pkcs1 - Reinstate support for legacy protocols ...	2024-11-19 10:28:41 -08:00
Stephen Boyd	21a5352dc7	Merge branches 'clk-marvell', 'clk-adi', 'clk-qcom' and 'clk-devm' into clk-next ... - Add devm_clk_bulk_get_all_enabled() to return number of clks acquired - Marvell PXA1908 SoC clks * clk-marvell: clk: mmp: Add Marvell PXA1908 MPMU driver clk: mmp: Add Marvell PXA1908 APMU driver clk: mmp: Add Marvell PXA1908 APBCP driver clk: mmp: Add Marvell PXA1908 APBC driver dt-bindings: clock: Add Marvell PXA1908 clock bindings clk: mmp: Switch to use struct u32_fract instead of custom one * clk-adi: clk: clk-axi-clkgen: make sure to enable the AXI bus clock dt-bindings: clock: axi-clkgen: include AXI clk * clk-qcom: (43 commits) clk: qcom: remove unused data from gcc-ipq5424.c clk: qcom: Add support for Global Clock Controller on QCS8300 dt-bindings: clock: qcom: Add GCC clocks for QCS8300 clk: qcom: add Global Clock controller (GCC) driver for IPQ5424 SoC clk: qcom: clk-alpha-pll: Add NSS HUAYRA ALPHA PLL support for ipq9574 dt-bindings: clock: Add Qualcomm IPQ5424 GCC binding clk: qcom: add SAR2130P GPU Clock Controller support clk: qcom: dispcc-sm8550: enable support for SAR2130P clk: qcom: tcsrcc-sm8550: add SAR2130P support clk: qcom: add support for GCC on SAR2130P clk: qcom: rpmh: add support for SAR2130P clk: qcom: rcg2: add clk_rcg2_shared_floor_ops dt-bindings: clk: qcom,sm8450-gpucc: add SAR2130P compatibles dt-bindings: clock: qcom,sm8550-dispcc: Add SAR2130P compatible dt-bindings: clock: qcom,sm8550-tcsr: Add SAR2130P compatible dt-bindings: clock: qcom: document SAR2130P Global Clock Controller dt-bindings: clock: qcom,rpmhcc: Add SAR2130P compatible clk: qcom: Make GCC_6125 depend on QCOM_GDSC dt-bindings: clock: qcom: gcc-ipq9574: remove q6 bring up clock macros dt-bindings: clock: qcom: gcc-ipq5332: remove q6 bring up clock macros ... * clk-devm: clk: Provide devm_clk_bulk_get_all_enabled() helper	2024-11-18 20:01:35 -08:00
Stephen Boyd	0cf32b1f37	Merge branches 'clk-samsung', 'clk-microchip', 'clk-imx', 'clk-amlogic' and 'clk-allwinner' into clk-next ... * clk-samsung: clk: samsung: Introduce Exynos8895 clock driver clk: samsung: clk-pll: Add support for pll_{1051x,1052x} dt-bindings: clock: samsung: Add Exynos8895 SoC clk: samsung: gs101: make all ufs related clocks critical clk: samsung: exynosautov920: add peric1, misc and hsi0/1 clock support dt-bindings: clock: exynosautov920: add peric1, misc and hsi0/1 clock definitions clk: samsung: Fix out-of-bound access of of_match_node() dt-bindings: clock: samsung: remove define with number of clocks for FSD clk: samsung: fsd: do not define number of clocks in bindings clk: samsung: Fix errors reported by checkpatch clk: samsung: Fix block comment style warnings reported by checkpatch * clk-microchip: clk: lan966x: add support for lan969x SoC clock driver clk: lan966x: prepare driver for lan969x support clk: lan966x: make clk_names const char * const dt-bindings: clock: add support for lan969x * clk-imx: clk: imx: imx8-acm: Fix return value check in clk_imx_acm_attach_pm_domains() clk: imx: lpcg-scu: Skip HDMI LPCG clock save/restore clk: imx: clk-scu: fix clk enable state save and restore clk: imx: fracn-gppll: fix pll power up clk: imx: fracn-gppll: correct PLL initialization flow clk: imx: lpcg-scu: SW workaround for errata (e10858) clk: imx: add i.MX91 clk dt-bindings: clock: Add i.MX91 clock support dt-bindings: clock: imx93: Drop IMX93_CLK_END macro definition clk: imx93: Move IMX93_CLK_END macro to clk driver clk: imx95-blk-ctl: Add one clock gate for HSIO block dt-bindings: clock: nxp,imx95-blk-ctl: Add compatible string for i.MX95 HSIO BLK CTRL * clk-amlogic: clk: amlogic: axg-audio: fix Kconfig dependency on RESET_MESON_AUX clk: amlogic: axg-audio: use the auxiliary reset driver reset: amlogic: Fix small whitespace issue reset: amlogic: add auxiliary reset driver support reset: amlogic: split the device core and platform probe reset: amlogic: move drivers to a dedicated directory reset: amlogic: add reset status support reset: amlogic: use reset number instead of register count reset: amlogic: add driver parameters reset: amlogic: make parameters unsigned reset: amlogic: use generic data matching function reset: amlogic: convert driver to regmap dt-bindings: clock: convert amlogic,meson8b-clkc.txt to dtschema clk: meson: meson8b: remove spinlock clk: meson: mpll: Delete a useless spinlock from the MPLL clk: meson: s4: pll: fix frac maximum value for hifi_pll clk: meson: c3: pll: fix frac maximum value for hifi_pll clk: meson: Support PLL with fixed fractional denominators clk: meson: s4: pll: hifi_pll support fractional multiplier * clk-allwinner: clk: sunxi-ng: Use of_property_present() for non-boolean properties clk: sunxi-ng: d1: Fix PLL_AUDIO0 preset clk: sunxi-ng: Constify struct ccu_reset_map clk: sunxi-ng: h616: Add sigma-delta modulation settings for audio PLL	2024-11-18 20:01:28 -08:00
Stephen Boyd	b2f8240153	Merge branches 'clk-mobileye', 'clk-twl', 'clk-nuvoton', 'clk-renesas' and 'clk-bindings' into clk-next ... - Mobileye EyeQ5, EyeQ6L and EyeQ6H clk driver - TWL6030 clk driver - Nuvoton Arbel BMC NPCM8XX SoC clks - Convert more clk bindings to YAML * clk-mobileye: clk: eyeq: add EyeQ6H west fixed factor clocks clk: eyeq: add EyeQ6H central fixed factor clocks clk: eyeq: add EyeQ5 fixed factor clocks clk: eyeq: add fixed factor clocks infrastructure clk: eyeq: require clock index with phandle in all cases clk: fixed-factor: add clk_hw_register_fixed_factor_index() function dt-bindings: clock: eyeq: add more Mobileye EyeQ5/EyeQ6H clocks dt-bindings: soc: mobileye: set `#clock-cells = <1>` for all compatibles clk: eyeq: add driver clk: divider: Introduce CLK_DIVIDER_EVEN_INTEGERS flag dt-bindings: clock: add Mobileye EyeQ6L/EyeQ6H clock indexes Revert "dt-bindings: clock: mobileye,eyeq5-clk: add bindings" * clk-twl: clk: twl: add TWL6030 support clk: twl: remove is_prepared * clk-nuvoton: clk: npcm8xx: add clock controller reset: npcm: register npcm8xx clock auxiliary bus device dt-bindings: reset: npcm: add clock properties * clk-renesas: clk: renesas: vbattb: Add VBATTB clock driver clk: Add devm_clk_hw_register_gate_parent_hw() clk: renesas: rzg2l: Fix FOUTPOSTDIV clk dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB clk: renesas: r9a08g045: Add power domain for RTC clk: renesas: r9a08g045: Mark the watchdog and always-on PM domains as IRQ safe clk: renesas: rzg2l-cpg: Use GENPD_FLAG_* flags instead of local ones clk: renesas: rzg2l-cpg: Move PM domain power on in rzg2l_cpg_pd_setup() dt-bindings: clock: r9a08g045-cpg: Add power domain ID for RTC clk: renesas: r8a779h0: Drop CLK_PLL2_DIV2 to clarify ZCn clocks clk: renesas: r9a09g057: Add clock and reset entries for ICU clk: renesas: r9a09g057: Add CA55 core clocks clk: renesas: Remove duplicate and trailing empty lines * clk-bindings: dt-bindings: clock: actions,owl-cmu: convert to YAML dt-bindings: clock: ti: Convert mux.txt to json-schema dt-bindings: clock: ti: Convert divider.txt to json-schema dt-bindings: clock: ti: Convert interface.txt to json-schema dt-bindings: clock: convert rockchip,rk3328-cru.txt to YAML	2024-11-18 20:00:28 -08:00
Stephen Boyd	6af88ccfcb	Merge branches 'clk-cleanup', 'clk-mediatek', 'clk-kunit', 'clk-xilinx' and 'clk-fixed-gate' into clk-next ... - Various clk driver cleanups - MediaTek MT6735 SoC clks - MediaTek MT7620, MT7628 and MT7688 MMC clks - KUnit tests for clk-assigned-rates{,-u64} - Add a driver for gated fixed rate clocks * clk-cleanup: clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access clk: Fix invalid execution of clk_set_rate clk: clk-loongson2: Fix memory corruption bug in struct loongson2_clk_provider clk: lan966x: make it selectable for ARCH_LAN969X clk: clk-apple-nco: Add NULL check in applnco_probe clk: starfive: jh7110-pll: Mark the probe function as __init clk: sophgo: avoid integer overflow in sg2042_pll_recalc_rate() clk: tegra: use clamp() in tegra_bpmp_clk_determine_rate() clk: cdce925: make regmap_cdce925_bus constant clk: Drop explicit initialization of struct i2c_device_id::driver_data to 0 clk: clk-qoriq: Replace of_node_put() with __free() clk: Remove unused clk_hw_rate_is_protected * clk-mediatek: clk: en7523: map io region in a single block clk: en7523: move en7581_reset_register() in en7581_clk_hw_init() clk: en7523: fix estimation of fixed rate for EN7581 clk: en7523: introduce chip_scu regmap clk: en7523: move clock_register in hw_init callback clk: en7523: remove REG_PCIE*_{MEM,MEM_MASK} configuration dt-bindings: clock: airoha: Update reg mapping for EN7581 SoC. clk: mediatek: Add drivers for MT6735 syscon clock and reset controllers dt-bindings: clock: mediatek: Add bindings for MT6735 syscon clock and reset controllers clk: mediatek: mt6735-apmixedsys: Fix an error handling path in clk_mt6735_apmixed_probe() clk: ralink: mtmips: add mmc related clocks for SoCs MT7620, MT7628 and MT7688 clk: ralink: mtmips: fix clocks probe order in oldest ralink SoCs clk: ralink: mtmips: fix clock plan for Ralink SoC RT3883 clk: mediatek: clk-mt8188-topckgen: Remove univpll from parents of mfg_core_tmp clk: mediatek: Add drivers for MediaTek MT6735 main clock and reset drivers dt-bindings: clock: Add MediaTek MT6735 clock and reset bindings clk: mediatek: drop two dead config options * clk-kunit: clk: Allow kunit tests to run without OF_OVERLAY enabled clk: test: Add KUnit tests for clock-assigned-rates{-u64} DT properties of: kunit: Extract some overlay boiler plate into macros clk: test: Add test managed of_clk_add_hw_provider() * clk-xilinx: clk: clocking-wizard: move dynamic reconfig setup behind flag dt-bindings: clock: xilinx: describe whether dynamic reconfig is enabled clk: clocking-wizard: move clock registration to separate function clk: clocking-wizard: use devres versions of clk_hw API clk: clocking-wizard: use newer clk_hw API clk: clocking-wizard: simplify probe/remove with devres helpers * clk-fixed-gate: clk: clk-gpio: add driver for gated-fixed-clocks clk: clk-gpio: use dev_err_probe for gpio-get failure clk: clk-gpio: update documentation for gpio-gate clock dt-bindings: clocks: add binding for gated-fixed-clocks	2024-11-18 20:00:03 -08:00
Linus Torvalds	ba1f9c8fe3	arm64 updates for 6.13: ... * Support for running Linux in a protected VM under the Arm Confidential Compute Architecture (CCA) * Guarded Control Stack user-space support. Current patches follow the x86 ABI of implicitly creating a shadow stack on clone(). Subsequent patches (already on the list) will add support for clone3() allowing finer-grained control of the shadow stack size and placement from libc * AT_HWCAP3 support (not running out of HWCAP2 bits yet but we are getting close with the upcoming dpISA support) * Other arch features: - In-kernel use of the memcpy instructions, FEAT_MOPS (previously only exposed to user; uaccess support not merged yet) - MTE: hugetlbfs support and the corresponding kselftests - Optimise CRC32 using the PMULL instructions - Support for FEAT_HAFT enabling ARCH_HAS_NONLEAF_PMD_YOUNG - Optimise the kernel TLB flushing to use the range operations - POE/pkey (permission overlays): further cleanups after bringing the signal handler in line with the x86 behaviour for 6.12 * arm64 perf updates: - Support for the NXP i.MX91 PMU in the existing IMX driver - Support for Ampere SoCs in the Designware PCIe PMU driver - Support for Marvell's 'PEM' PCIe PMU present in the 'Odyssey' SoC - Support for Samsung's 'Mongoose' CPU PMU - Support for PMUv3.9 finer-grained userspace counter access control - Switch back to platform_driver::remove() now that it returns 'void' - Add some missing events for the CXL PMU driver * Miscellaneous arm64 fixes/cleanups: - Page table accessors cleanup: type updates, drop unused macros, reorganise arch_make_huge_pte() and clean up pte_mkcont(), sanity check addresses before runtime P4D/PUD folding - Command line override for ID_AA64MMFR0_EL1.ECV (advertising the FEAT_ECV for the generic timers) allowing Linux to boot with firmware deployments that don't set SCTLR_EL3.ECVEn - ACPI/arm64: tighten the check for the array of platform timer structures and adjust the error handling procedure in gtdt_parse_timer_block() - Optimise the cache flush for the uprobes xol slot (skip if no change) and other uprobes/kprobes cleanups - Fix the context switching of tpidrro_el0 when kpti is enabled - Dynamic shadow call stack fixes - Sysreg updates - Various arm64 kselftest improvements -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmc5POIACgkQa9axLQDI XvEDYA//a3eeNkgMuGdnSCVcLz+zy+oNwAwboG/4X1DqL8jiCbI4npwugPx95RIA YZOUvo9T2aL3OyefpUHll4gFHqx9OwoZIig2F70TEUmlPsGUbh0KBkdfQF3xZPdl EwV0kHSGEqMWMBwsGJGwgCYrUaf1MUQzh1GBl7VJ2ts5XsJBaBeOyKkysij26wtZ V+aHq2IUx7qQS7+HC/4P6IoHxKziFcsCMovaKaynP4cw9xXBQbDMcNlHEwndOMyk pu2zrv7GG0j3KQuVP/2Alf5FKhmI0GVGP/6Nc/zsOmw96w8Kf7HfzEtkHawr2aRq rqg/c9ivzDn1p+fUBo4ZYtrRk4IAY+yKu6hdzdLTP5+bQrBTWTO9rjQVBm9FAGYT sCdEj1NqzvExvNHD7X6ut/GJ05lmce3K+qeSXSEysN9gqiT3eomYWMXrD2V2lxzb rIDDcb/icfaqjt14Mksh19r/rzNeq7noj9CGSmcqw0BHZfHzl38Lai6pdfYzCNyn vCM/c4c1D/WWX8/lifO1JZVbhDk1jy82Iphg2KEhL8iKPxDsKBBZLmYuU1oa7tMo WryGAz9+GQwd+W9chFuaOEtMnzvW2scEJ5Eb2fEf0Qj0aEurkL+C9dZR6o1GN77V DBUxtU628Ef4PJJGfbNCwZzdd8UPYG3a/mKfQQ3dz0oz2LySlW4= =wDot -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Support for running Linux in a protected VM under the Arm Confidential Compute Architecture (CCA) - Guarded Control Stack user-space support. Current patches follow the x86 ABI of implicitly creating a shadow stack on clone(). Subsequent patches (already on the list) will add support for clone3() allowing finer-grained control of the shadow stack size and placement from libc - AT_HWCAP3 support (not running out of HWCAP2 bits yet but we are getting close with the upcoming dpISA support) - Other arch features: - In-kernel use of the memcpy instructions, FEAT_MOPS (previously only exposed to user; uaccess support not merged yet) - MTE: hugetlbfs support and the corresponding kselftests - Optimise CRC32 using the PMULL instructions - Support for FEAT_HAFT enabling ARCH_HAS_NONLEAF_PMD_YOUNG - Optimise the kernel TLB flushing to use the range operations - POE/pkey (permission overlays): further cleanups after bringing the signal handler in line with the x86 behaviour for 6.12 - arm64 perf updates: - Support for the NXP i.MX91 PMU in the existing IMX driver - Support for Ampere SoCs in the Designware PCIe PMU driver - Support for Marvell's 'PEM' PCIe PMU present in the 'Odyssey' SoC - Support for Samsung's 'Mongoose' CPU PMU - Support for PMUv3.9 finer-grained userspace counter access control - Switch back to platform_driver::remove() now that it returns 'void' - Add some missing events for the CXL PMU driver - Miscellaneous arm64 fixes/cleanups: - Page table accessors cleanup: type updates, drop unused macros, reorganise arch_make_huge_pte() and clean up pte_mkcont(), sanity check addresses before runtime P4D/PUD folding - Command line override for ID_AA64MMFR0_EL1.ECV (advertising the FEAT_ECV for the generic timers) allowing Linux to boot with firmware deployments that don't set SCTLR_EL3.ECVEn - ACPI/arm64: tighten the check for the array of platform timer structures and adjust the error handling procedure in gtdt_parse_timer_block() - Optimise the cache flush for the uprobes xol slot (skip if no change) and other uprobes/kprobes cleanups - Fix the context switching of tpidrro_el0 when kpti is enabled - Dynamic shadow call stack fixes - Sysreg updates - Various arm64 kselftest improvements * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (168 commits) arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled kselftest/arm64: Try harder to generate different keys during PAC tests kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all() arm64/ptrace: Clarify documentation of VL configuration via ptrace kselftest/arm64: Corrupt P0 in the irritator when testing SSVE acpi/arm64: remove unnecessary cast arm64/mm: Change protval as 'pteval_t' in map_range() kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c kselftest/arm64: Add FPMR coverage to fp-ptrace kselftest/arm64: Expand the set of ZA writes fp-ptrace does kselftets/arm64: Use flag bits for features in fp-ptrace assembler code kselftest/arm64: Enable build of PAC tests with LLVM=1 kselftest/arm64: Check that SVCR is 0 in signal handlers selftests/mm: Fix unused function warning for aarch64_write_signal_pkey() kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests kselftest/arm64: Fix build with stricter assemblers arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux() arm64/scs: Deal with 64-bit relative offsets in FDE frames ...	2024-11-18 18:10:37 -08:00
Linus Torvalds	77a0cfafa9	for-6.13/block-20241118 ... -----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmc7S40QHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpjHVD/43rDZ8ehs+IAAr6S0RemNX1SRG0mK2UOEb kMoNogS7StO/c4JYW3JuzCyLRn5ZsgeWV/muqxwDEWQrmTGrvi+V45KikrZPwm3k p0ump33qV9EU2jiR1MKZjtwK2P0CI7/DD3W8ww6IOvKbTT7RcqQcdHznvXArFBtc xCuQPpayFG7ZasC+N9VaBwtiUEVgU3Ek9AFT7UVZRWajjHPNalQwaooJWayO0rEG KdoW5yG0ryLrgCY2ACSvRLS+2s14EJtb8hgT08WKHTNgd5LxhSKxfsTapamua+7U FdVS6Ij0tEkgu2jpvgj7QKO0Uw10Cnep2gj7RHts/LVewvkliS6XcheOzqRS1jWU I2EI+UaGOZ11OUiw52VIveEVS5zV/NWhgy5BSP9LYEvXw0BUAHRDYGMem8o5G1V1 SWqjIM1UWvcQDlAnMF9FDVzojvjVUmYWvcAlFFztO8J0B7SavHR3NcfHwEf57reH rNoUbi/9c4/wjJJF33gejiR5pU+ewy/Mk75GrtX3xpEqlztfRbf9/FbPCMEAO1KR DF/b3lkUV9i2/BRW6a0SpZ5RDSmSYMnateel6TrPyVSRnpiSSFO8FrbynwUOa17b 6i49YDFWzzXOrR1YWDg6IEtTrcmBEmvi7F6aoDs020qUnL0hwLn1ZuoIxuiFEpor Z0iFF1B/nw== =PWTH -----END PGP SIGNATURE----- Merge tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux Pull block updates from Jens Axboe: - NVMe updates via Keith: - Use uring_cmd helper (Pavel) - Host Memory Buffer allocation enhancements (Christoph) - Target persistent reservation support (Guixin) - Persistent reservation tracing (Guixen) - NVMe 2.1 specification support (Keith) - Rotational Meta Support (Matias, Wang, Keith) - Volatile cache detection enhancment (Guixen) - MD updates via Song: - Maintainers update - raid5 sync IO fix - Enhance handling of faulty and blocked devices - raid5-ppl atomic improvement - md-bitmap fix - Support for manually defining embedded partition tables - Zone append fixes and cleanups - Stop sending the queued requests in the plug list to the driver ->queue_rqs() handle in reverse order. - Zoned write plug cleanups - Cleanups disk stats tracking and add support for disk stats for passthrough IO - Add preparatory support for file system atomic writes - Add lockdep support for queue freezing. Already found a bunch of issues, and some fixes for that are in here. More will be coming. - Fix race between queue stopping/quiescing and IO queueing - ublk recovery improvements - Fix ublk mmap for 64k pages - Various fixes and cleanups * tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux: (118 commits) MAINTAINERS: Update git tree for mdraid subsystem block: make struct rq_list available for !CONFIG_BLOCK block/genhd: use seq_put_decimal_ull for diskstats decimal values block: don't reorder requests in blk_mq_add_to_batch block: don't reorder requests in blk_add_rq_to_plug block: add a rq_list type block: remove rq_list_move virtio_blk: reverse request order in virtio_queue_rqs nvme-pci: reverse request order in nvme_queue_rqs btrfs: validate queue limits block: export blk_validate_limits nvmet: add tracing of reservation commands nvme: parse reservation commands's action and rtype to string nvmet: report ns's vwc not present md/raid5: Increase r5conf.cache_name size block: remove the ioprio field from struct request block: remove the write_hint field from struct request nvme: check ns's volatile write cache not present nvme: add rotational support nvme: use command set independent id ns if available ...	2024-11-18 16:50:08 -08:00
Linus Torvalds	3d1b536c13	ata changes for 6.13 ... - Fix typos in comments (Yan Zhen) - Remove unused macro definitions (Damien Le Moal) - Switch back to the .remove() callback (Uwe Kleine-König) - Make use of the get_unaligned_be24() helper instead of open coding (Andy Shevchenko) - Refactor and cleanup ata_scsi_simulate() command emulation, such that all commands use ata_scsi_rbuf_fill() with its own callback (Damien Le Moal) - Improve ata_scsi_simulate() command emulation by accurately setting the SCSI command residual (number of bytes not filled) in the command reply (Damien Le Moal) - Add missing iommus property in ahci-platform device tree binding (Frank Wunderlich) -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCZzthbQAKCRDJZDGjmcZN cvgtAQDDzKLg9UQhJou7nAjrdyJi7gZBy5o0Q0KIjMOqgnmz8wEA6HC+EWOjH3Fq 3f1nwxXGKR7T+bVUZpYfB+YTB8ly+g0= =0XKN -----END PGP SIGNATURE----- Merge tag 'ata-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux Pull ata updates from Niklas Cassel: - Fix typos in comments (Yan Zhen) - Remove unused macro definitions (Damien Le Moal) - Switch back to the .remove() callback (Uwe Kleine-König) - Make use of the get_unaligned_be24() helper instead of open coding (Andy Shevchenko) - Refactor and cleanup ata_scsi_simulate() command emulation, such that all commands use ata_scsi_rbuf_fill() with its own callback (Damien Le Moal) - Improve ata_scsi_simulate() command emulation by accurately setting the SCSI command residual (number of bytes not filled) in the command reply (Damien Le Moal) - Add missing iommus property in ahci-platform device tree binding (Frank Wunderlich) * tag 'ata-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: dt-bindings: ata: ahci-platform: add missing iommus property ata: libata-scsi: Return residual for emulated SCSI commands ata: libata-scsi: Remove struct ata_scsi_args ata: libata-scsi: Document all VPD page inquiry actors ata: libata-scsi: Refactor ata_scsiop_maint_in() ata: libata-scsi: Refactor ata_scsiop_read_cap() ata: libata-scsi: Refactor ata_scsi_simulate() ata: libata-scsi: Refactor scsi_6_lba_len() with use of get_unaligned_be24() ata: Switch back to struct platform_driver::remove() ata: libata: Remove unused macro definitions ata: Fix typos in the comment	2024-11-18 16:45:28 -08:00
Rob Herring (Arm)	5bf99baefb	dt-bindings: net: renesas,ether: Drop undocumented "micrel,led-mode" ... "micrel,led-mode" is not yet documented by a schema. It's irrelevant to the example, so just drop it. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20241113225742.1784723-2-robh@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>	2024-11-18 16:17:41 -08:00
Jiri Kosina	390b059ac7	Merge branch 'for-6.13/goodix' into for-linus ... - Support for Goodix GT7986U SPI (Charles Wang) - assorted code cleanups and fixes (Charles Wang)	2024-11-18 21:57:27 +01:00
Wolfram Sang	1b3073291d	i2c-host updates for v6.13, part 1 ... Improvements and Refactoring: - All controllers using the 'remove_new' callback have been reverted to use the 'remove' callback. - Makefile improvements (switched from '*-objs' to '*-y') - Intel SCH controller underwent significant refactoring: - Improved usage of private data references. - Transitioned to memory-mapped I/O functions. - Adopted 'devm' functions for resource management. - Added kernel-doc compatible comments. - Used 'const' where applicable. - Numerous smaller refinements. This brings love and a modern look to the driver. - Additional cleanups in the DesignWare driver. - PIIX4 driver updates: - Exposed functions and definitions in the header file to enable usage by other drivers (e.g., AMD ASF). - Nuvoton NPCM I2C controller: - Enhanced read/write operations and bus error (BER) flag management to address corner cases that could lead to timeouts. - Qualcomm CCI driver received several cleanups. - iMX/MXC: - Improved message handling to reduce I2C protocol overhead. - Refactored DMA/non-DMA read/write and bus polling mechanisms to achieve this. New Features: - i2c-cadence: - Added support for atomic transfers. - Refactored to group generic code into separate functions. - Qualcomm CCI: - Added support for a 32MHz serial engine clock. - Added support for: - HJMC01 DesignWare ACPI HID. - ACPI documentation for PIIX4. Deprecated Features: - Dropped support for AMD756 S4882 and NFORCE2 S4985. New Hardware Support: - Added support for: - Intel Panther Lake. - AMD ASF. - S32G2/S32G3 SoCs. - Realtek RTL I2C Controller. - New drivers: - 'i2c-amd-asf-plat.c' for AMD ASF. - 'i2c-rtl9300.c' for Realtek RTL. Fixes: - AMD ASF driver: - Fixed an uninitialised 'len' variable. Devicetree Updates: - Documented Qualcomm SDM670. - Added 'PIC64GX' compatibility to Microchip Core I2C binding. - Added support for S32G. -----BEGIN PGP SIGNATURE----- iIwEABYIADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCZznN0xYcYW5kaS5zaHl0 aUBrZXJuZWwub3JnAAoJENp4BWYm0y1unOcA+wdXrf10ntY7jsGdd17dKQ951k7m mPG1xfDXF/qbDa2bAQCKYGVBwv/efAREtthq9zhfIcRxgefH7iKQIUm2YOcCCw== =xYzW -----END PGP SIGNATURE----- Merge tag 'i2c-host-6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow i2c-host updates for v6.13, part 1 Major Improvements and Refactoring: - All controllers using the 'remove_new' callback have been reverted to use the 'remove' callback. - Intel SCH controller underwent significant refactoring, this brings love and a modern look to the driver. - PIIX4 driver refactored to enable usage by other drivers (e.g., AMD ASF). - iMX/MXC improved message handling to reduce protocol overhead: Refactored DMA/non-DMA read/write and bus polling mechanisms to achieve this. - ACPI documentation for PIIX4. New Features: - i2c-cadence added support for atomic transfers. - Qualcomm CII added support for a 32MHz serial engine clock. Deprecated Features: - Dropped outdated support for AMD756 S4882 and NFORCE2 S4985. If somebody misses this, Jean will rewrite support using the proper i2c mux framework. New Hardware Support: - Added support for: - Intel Panther Lake (new ID) - AMD ASF (new driver) - S32G2/S32G3 SoCs (new ID) - Realtek RTL I2C Controller (new driver) - HJMC01 DesignWare ACPI HID (new ID) - PIC64GX to Microchip Core (new ID) - Qualcomm SDM670 to Qualcomm CCI (new ID)	2024-11-18 08:35:47 +01:00
Konrad Dybcio	b1c48de36b	dt-bindings: cpufreq: cpufreq-qcom-hw: Add SC8180X compatible ... Add a SoC-specific compatible for SC8180X. It has 2 domains and uses the older, non-EPSS hardware. Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>	2024-11-18 09:55:38 +05:30
Chris Packham	c5eda03330	dt-bindings: i2c: Add Realtek RTL I2C Controller ... Add dt-schema for the I2C controller on the RTL9300 Ethernet switch with integrated SoC. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>	2024-11-17 11:58:56 +01:00
Ciprian Marian Costea	f3ed495940	dt-bindings: i2c: imx: add SoC specific compatible strings for S32G ... S32G2 and S32G3 SoCs use the same I2C controller as i.MX. But there are small differences such as specific <clock divider, register value> pairs. So add new compatible strings 'nxp,s32g2-i2c'and 'nxp,s32g3-i2c' for S32G2/S32G3 Socs. Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>	2024-11-17 11:58:56 +01:00
Pierre-Henry Moussay	fff8b0eda2	dt-bindings: i2c: microchip: corei2c: Add PIC64GX as compatible with driver ... PIC64GX i2c is compatible with the microchip corei2c, just add fallback Signed-off-by: Pierre-Henry Moussay <pierre-henry.moussay@microchip.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>	2024-11-17 11:58:14 +01:00
Richard Acayan	5110445332	dt-bindings: i2c: qcom-cci: Document SDM670 compatible ... The CCI on the Snapdragon 670 is the interface for controlling camera hardware over I2C. Add the compatible so it can be added to the SDM670 device tree. Signed-off-by: Richard Acayan <mailingradian@gmail.com> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>	2024-11-17 11:58:14 +01:00
Rob Herring (Arm)	6bbdb903db	dt-bindings: net: dsa: microchip,ksz: Drop undocumented "id" ... "id" is not a documented property, so drop it. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20241113225642.1783485-2-robh@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>	2024-11-15 14:29:28 -08:00
Jakub Kicinski	6cd663f03f	bluetooth-next pull request for net-next: ... - btusb: add Foxconn 0xe0fc for Qualcomm WCN785x - btmtk: Fix ISO interface handling - Add quirk for ATS2851 - btusb: Add RTL8852BE device 0489:e123 - ISO: Do not emit LE PA/BIG Create Sync if previous is pending - btusb: Add USB HW IDs for MT7920/MT7925 - btintel_pcie: Add handshake between driver and firmware - btintel_pcie: Add recovery mechanism - hci_conn: Use disable_delayed_work_sync - SCO: Use kref to track lifetime of sco_conn - ISO: Use kref to track lifetime of iso_conn - btnxpuart: Add GPIO support to power save feature - btusb: Add 0x0489:0xe0f3 and 0x13d3:0x3623 for Qualcomm WCN785x -----BEGIN PGP SIGNATURE----- iQJNBAABCAA3FiEE7E6oRXp8w05ovYr/9JCA4xAyCykFAmc2bBcZHGx1aXoudm9u LmRlbnR6QGludGVsLmNvbQAKCRD0kIDjEDILKfnGEACV1YylQ9kJxzyDwyxrZtYG 3T2I+8qQwIpokyGcYHpMC0kJFAzCbywGxjS3njpOrM0nTuvGpvLAD40Sn+pMHbKb 3XzNNSixuxgJvr3CyDM0KOua/2nFQZyPe0DXe4D9bzOproIHDyoQkWbVqntLCyXO DDwwSF/CcgfZsIf5dfGir6erUBOXzYUUlCL7Q0ap2DNdeYAv6XLWwVSMu7okIFpH H/vBcWMWXwNNyEtDIHPmRYut14qEFASTRWsSe7IiIoL2V5VG5BVUALk8rAmoVv10 IjE5kAmdLBHplhtnDIEg55CHIivlnbOp9d7WMhKkwY+vrPx571uFuwXeCBrg+5cd SyekP701TtS5oscT2SazimZTdtS0YLmJgVlhxX8DAIeElO9pEPdJt9CNCafFKmEY LMleGXDrH4bnTA1k6nMX2Ky4/oqlSonPbYXZ4GzL5ZMRg9biIkRI3YyRvKLM1plh MoO14zXhS184Cf0vSaGSeZ2nqsv7Z0lPkGJxCpGyzkOoA1VnzORl9teik5C6eeCw 7wOoM+x+aJU8hxyD65DkyPNzLkvrEohRJWx7XMOKZEC1uFvBrJfEc/lb7TH5E+Zd PbPG1+x5Y3CAwvOcQzbpVeF0ujL0+KvJF+Y1q7eJ3mB+KoDPBEVbcO1ypvL6kbfW ETYrD/fuBiuxQE/XM0Xdlw== =niGG -----END PGP SIGNATURE----- Merge tag 'for-net-next-2024-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - btusb: add Foxconn 0xe0fc for Qualcomm WCN785x - btmtk: Fix ISO interface handling - Add quirk for ATS2851 - btusb: Add RTL8852BE device 0489:e123 - ISO: Do not emit LE PA/BIG Create Sync if previous is pending - btusb: Add USB HW IDs for MT7920/MT7925 - btintel_pcie: Add handshake between driver and firmware - btintel_pcie: Add recovery mechanism - hci_conn: Use disable_delayed_work_sync - SCO: Use kref to track lifetime of sco_conn - ISO: Use kref to track lifetime of iso_conn - btnxpuart: Add GPIO support to power save feature - btusb: Add 0x0489:0xe0f3 and 0x13d3:0x3623 for Qualcomm WCN785x * tag 'for-net-next-2024-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (51 commits) Bluetooth: MGMT: Add initial implementation of MGMT_OP_HCI_CMD_SYNC Bluetooth: fix use-after-free in device_for_each_child() Bluetooth: btintel: Direct exception event to bluetooth stack Bluetooth: hci_core: Fix calling mgmt_device_connected Bluetooth: hci_bcm: Use the devm_clk_get_optional() helper Bluetooth: ISO: Send BIG Create Sync via hci_sync Bluetooth: hci_conn: Remove alloc from critical section Bluetooth: ISO: Use kref to track lifetime of iso_conn Bluetooth: SCO: Use kref to track lifetime of sco_conn Bluetooth: HCI: Add IPC(11) bus type Bluetooth: btusb: Add 3 HWIDs for MT7925 Bluetooth: btusb: Add new VID/PID 0489/e124 for MT7925 Bluetooth: ISO: Update hci_conn_hash_lookup_big for Broadcast slave Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending Bluetooth: ISO: Fix matching parent socket for BIS slave Bluetooth: ISO: Do not emit LE PA Create Sync if previous is pending Bluetooth: btrtl: Decrease HCI_OP_RESET timeout from 10 s to 2 s Bluetooth: btbcm: fix missing of_node_put() in btbcm_get_board_name() Bluetooth: btusb: Add new VID/PID 0489/e111 for MT7925 Bluetooth: btmtk: adjust the position to init iso data anchor ... ==================== Link: https://patch.msgid.link/20241114214731.1994446-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>	2024-11-15 14:16:28 -08:00
Rob Herring (Arm)	28b513b5a6	Merge branch 'dt/linus' into dt/next ... Pull-in kunit kconfig fix	2024-11-15 14:03:59 -06:00
Rob Herring (Arm)	b52a8deea5	dt-bindings: net: sff,sfp: Fix "interrupts" property typo ... The example has "interrupt" property which is not a defined property. It should be "interrupts" instead. "interrupts" also should not contain a phandle. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20241113225825.1785588-2-robh@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>	2024-11-14 19:31:35 -08:00
Rob Herring (Arm)	ac0928d5b6	dt-bindings: net: mdio-mux-gpio: Drop undocumented "marvell,reg-init" ... "marvell,reg-init" is not yet documented by schema. It's irrelevant to the example, so just drop it. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20241113225713.1784118-2-robh@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>	2024-11-14 19:30:16 -08:00
Théo Lebrun	a370b2d22d	dt-bindings: soc: mobileye: set #clock-cells = <1> for all compatibles ... Some compatibles expose a single clock. For those, we used to let them using `#clock-cells = <0>` (ie <&olb> reference rather than <&olb 0>). Switch away from that: enforce a cell for all compatibles. This is more straight forward, and avoids devicetree changes whenever a compatible goes from exposing a single clock to multiple ones. Also, dt-bindings get simpler. *This is an ABI break*. Change it while EyeQ5 platform support is at its infancy, without any user. More clocks might hide in each OLB as some registers are still unknown. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20241106-mbly-clk-v2-1-84cfefb3f485@bootlin.com Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2024-11-14 14:52:26 -08:00
Nuno Sa	47f3f5a82a	dt-bindings: clock: axi-clkgen: include AXI clk ... In order to access the registers of the HW, we need to make sure that the AXI bus clock is enabled. Hence let's increase the number of clocks by one and add clock-names to differentiate between parent clocks and the bus clock. Fixes: 0e646c52cf ("clk: Add axi-clkgen driver") Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20241029-axi-clkgen-fix-axiclk-v2-1-bc5e0733ad76@analog.com Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2024-11-14 14:43:40 -08:00
Stephen Boyd	53454b7a41	YAML conversion of the rk3328 clock controller binding. ... -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmc2d2QQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgcwPCACrv6yLademoSRjq5/OeaCtfSbmMFvsdrXd WDsRX1Sey+ZMqM3KOrb2BZMdT38U4rS1aCTcGfTxS9MCqswhuOa+eafuqDJpo/f2 64SAfSMFUq+exk+DV+CZVBEuYQp0U38o8yuZRnqs4FhCfH4+NNPvsYScWUmxoTnG uX0tGjBWUfiqzQVSzm9QgChebC4/tN+SChczGriLwMUk0Y4r1t/W0jTejkSKxS3v 5z+iNBXflMVeM/ddJp1lv3rgmJIxmhdpTTuNC+y+1nAcTic3rOJYw2tFjm2ze5se C/lMxGHZXeILbBSQyGM2+lwjydJ5RZiBaz8fpkLseVk94Ko88BIg =rn1j -----END PGP SIGNATURE----- Merge tag 'v6.13-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-bindings Pull a YAML conversion of the rk3328 clock controller binding from Heiko Stuebner. * tag 'v6.13-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: dt-bindings: clock: convert rockchip,rk3328-cru.txt to YAML	2024-11-14 14:41:18 -08:00
Duje Mihanović	f03b086624	dt-bindings: clock: Add Marvell PXA1908 clock bindings ... Add dt bindings and documentation for the Marvell PXA1908 clock controller. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> Link: https://lore.kernel.org/r/20241104-pxa1908-lkml-v13-4-e050609b8d6c@skole.hr Signed-off-by: Stephen Boyd <sboyd@kernel.org>	2024-11-14 14:32:56 -08:00