Ian mentioned a reliably occurred failure in the trace_btf_general test
where he obtained trace output of:
sleep/279619 clock_nanosleep(0, 0, {1,1,}, 0x7ffcd47b6450) = 0
But the regex pattern used for verification is
"^sleep/[0-9]+ clock_nanosleep\(0, 0, \{1,\}, ..."
This lead to a mismatch.
The reason is, different sleep commands use different timespec data to
call clock_nanosleep, on my machine, the value of tv_nsec is 0.
~~~
$ sudo /tmp/perf/perf trace -e clock_nanosleep -- sleep 1
0.000 (1000.196 ms): sleep/54261 clock_nanosleep(rqtp: { .tv_sec:
1, .tv_nsec: 0 }, rmtp: 0x7ffe13529550) = 0
~~~
While Ian had this trace log:
~~~
$ sudo /tmp/perf/perf trace -e clock_nanosleep -- sleep 1
0.000 (1000.208 ms): sleep/1710732 clock_nanosleep(rqtp: {
.tv_sec: 1, .tv_nsec: 1 }, rmtp: 0x7ffc091f4090) = 0
~~~
Because sleep's behavior of setting 'tv_nsec' is not certain, and tv_sec
is most definitely 1, this patch relaxes the key regex pattern to
'\{1,.*\}' for a better chance of matching.
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250528191148.89118-7-howardchu95@gmail.com
Reported-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The event 'timer:hrtimer_setup' is relatively new, for older kernels,
perf trace enum tests won't run as the event 'timer:hrtimer_setup'
cannot be found.
It was originally called 'timer:hrtimer_init', before being renamed in:
commit 244132c4e5 ("tracing/timers: Rename the hrtimer_init event to hrtimer_setup")
Using timer:hrtimer_start should be enough for current testing, and
hopefully 'start' won't be renamed in the future.
Before:
$ sudo /tmp/perf test enum -vv
107: perf trace enum augmentation tests:
107: perf trace enum augmentation tests : Running
--- start ---
test child forked, pid 786187
Checking if vmlinux exists
Tracing syscall landlock_add_rule
Tracing non-syscall tracepoint timer:hrtimer_setup,timer:hrtimer_start
[tracepoint failure] Failed to trace timer:hrtimer_setup,timer:hrtimer_start tracepoint, output:
event syntax error: 'timer:hrtimer_setup,timer:hrtimer_start'
\___ unknown tracepoint
Error: File /sys/kernel/tracing//events/timer/hrtimer_setup not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events
---- end(-1) ----
107: perf trace enum augmentation tests : FAILED!
After:
$ sudo /tmp/perf test enum -vv
107: perf trace enum augmentation tests:
107: perf trace enum augmentation tests : Running
--- start ---
test child forked, pid 808547
Checking if vmlinux exists
Tracing syscall landlock_add_rule
Tracing non-syscall tracepoint timer:hrtimer_start
---- end(0) ----
107: perf trace enum augmentation tests : Ok
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250528191148.89118-4-howardchu95@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Currently perf test utilizes the set -e option in shell that exit
immediately if a command exits with a non-zero status, this prevents
further error handling and introduces ambiguity. This patch removes set
-e and prints the error message after invoking perf trace during perf
tests.
In my case, the command that exits with a non-zero status is perf
trace instead of grep, because it can't find the 'timer:hrtimer_setup'
tracepoint, see below.
Before:
$ sudo /tmp/perf test enum -vv
107: perf trace enum augmentation tests:
107: perf trace enum augmentation tests : Running
--- start ---
test child forked, pid 783533
Checking if vmlinux exists
Tracing syscall landlock_add_rule
Tracing non-syscall tracepoint syscall
---- end(-1) ----
107: perf trace enum augmentation tests : FAILED!
After:
$ sudo /tmp/perf test enum -vv
107: perf trace enum augmentation tests:
107: perf trace enum augmentation tests : Running
--- start ---
test child forked, pid 851658
Checking if vmlinux exists
Tracing syscall landlock_add_rule
Tracing non-syscall tracepoint timer:hrtimer_setup,timer:hrtimer_start
[tracepoint failure] Failed to trace tracepoint timer:hrtimer_setup,timer:hrtimer_start, output:
event syntax error: 'timer:hrtimer_setup,timer:hrtimer_start'
\___ unknown tracepoint
Error: File /sys/kernel/tracing//events/timer/hrtimer_setup not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events---- end(-1) ----
107: perf trace enum augmentation tests : FAILED!
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250528191148.89118-3-howardchu95@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To match the style of the existing codebase, no functional changes
were applied.
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250528191148.89118-2-howardchu95@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The --map-dump option was removed in 5e6da6be30 ("perf trace: Migrate
BPF augmentation to use a skeleton"), this patch removes its remaining
documentation.
Fixes: 5e6da6be30 ("perf trace: Migrate BPF augmentation to use a skeleton")
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Link: https://lore.kernel.org/r/20250601173252.717780-1-howardchu95@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Commit 76a97cf2e1 ("perf build: Remove libbpf pre-1.0 feature
tests") removed the libbpf feature test logic used by perf in favor of
using LIBBPF_MAJOR_VERSION. Remove some build targets that should have
been removed as part of that clean up.
Fixes: 76a97cf2e1 ("perf build: Remove libbpf pre-1.0 feature tests")
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250603221358.2562167-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Now the target doesn't have a uid, it is handled through BPF filters,
remove the uid options to thread_map creation. Tidy up the functions
used in tests to avoid passing unused arguments.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250604174545.2853620-11-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Gathering threads with a uid by scanning /proc is inherently racy
leading to perf_event_open failures that quit perf. All users of the
functionality now use BPF filters, so remove uid and uid_str from
target.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250604174545.2853620-10-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Finding user processes by scanning /proc is inherently racy and
results in perf_event_open failures. Use a BPF filter to drop samples
where the uid doesn't match.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250604174545.2853620-9-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Finding user processes by scanning /proc is inherently racy and
results in perf_event_open failures. Use a BPF filter to drop samples
where the uid doesn't match. Ensure adding the BPF filter forces
system-wide.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250604174545.2853620-8-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Finding user processes by scanning /proc is inherently racy and
results in perf_event_open failures. Use a BPF filter to drop samples
where the uid doesn't match.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250604174545.2853620-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Based on the system-wide test with changes around how failure is
handled as BPF permissions are a bigger issue than perf event
paranoia.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250604174545.2853620-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Finding user processes by scanning /proc is inherently racy and
results in perf_event_open failures. Use a BPF filter to drop samples
where the uid doesn't match. Ensure adding the BPF filter forces
system-wide.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250604174545.2853620-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add parse_uid_filter filter as a helper to parse_filter, that
constructs a uid filter string. As uid filters don't work with
tracepoint filters, add a is_possible_tp_filter function so the
tracepoint filter isn't attempted for tracepoint evsels.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250604174545.2853620-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Allow parse_uid to be called without a struct target. Rather than have
two errors, remove TARGET_ERRNO__USER_NOT_FOUND and use
TARGET_ERRNO__INVALID_UID as the handling is identical.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250604174545.2853620-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The BPF filter needs libbpf/BPF-skeleton support and root privilege.
Add error messages to help users understand the problem easily.
When it's not build with BPF support (make BUILD_BPF_SKEL=0).
$ sudo perf record -e cycles --filter "pid != 0" true
Error: BPF filter is requested but perf is not built with BPF.
Please make sure to build with libbpf and BPF skeleton.
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
--filter <filter>
event filter
When it supports BPF but runs without root or CAP_BPF. Note that it
also checks pinned BPF filters.
$ perf record -e cycles --filter "pid != 0" -o /dev/null true
Error: BPF filter only works for users with the CAP_BPF capability!
Please run 'perf record --setup-filter pin' as root first.
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
--filter <filter>
event filter
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250604174835.1852481-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add initial DMR support, which required smarter RAPL probe
Fix AMD MSR RAPL energy reporting
Add RAPL power limit configuration output
Minor fixes
Signed-off-by: Len Brown <len.brown@intel.com>
For the RAPL package energy status counter, Intel and AMD share the same
perf_subsys and perf_name, but with different MSR addresses.
Both rapl_counter_arch_infos[0] and rapl_counter_arch_infos[1] are
introduced to describe this counter for different Vendors.
As a result, the perf counter is probed twice, and causes a failure in
in get_rapl_counters() because expected_read_size and actual_read_size
don't match.
Fix the problem by skipping the already probed counter.
Note, this is not a perfect fix. For example, if different
vendors/platforms use the same MSR value for different purpose, the code
can be fooled when it probes a rapl_counter_arch_infos[] entry that does
not belong to the running Vendor/Platform.
In a long run, better to put rapl_counter_arch_infos[] into the
platform_features so that this becomes Vendor/Platform specific.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
platform_features->rapl_msrs describes the RAPL MSRs supported. While
RAPL Perf counters can be exposed from different kernel backend drivers,
e.g. RAPL MSR I/F driver, or RAPL TPMI I/F driver.
Thus, turbostat should first blindly probe all the available RAPL Perf
counters, and falls back to the RAPL MSR counters if they are listed in
platform_features->rapl_msrs.
With this, platforms that don't have RAPL MSRs can clear the
platform_features->rapl_msrs bits and use RAPL Perf counters only.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Increase the code readability by moving the no_perf/no_msr flag and the
cai->perf_name/cai->msr sanity checks into the counter probe functions.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
probe_rapl_msr() is reused for probing RAPL MSR counters, cstate MSR
counters and MPERF/APERF/SMI MSR counters, thus its name is misleading.
Similar to add_perf_counter(), introduce add_msr_counter() to probe a
counter via MSR. Introduce wrapper function add_rapl_msr_counter() at
the same time to add extra check for Zero return value for specified
RAPL counters.
No functional change intended.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As the only caller of add_msr_perf_counter_(), add_msr_perf_counter()
just gives extra debug output on top. There is no need to keep both
functions.
Remove add_msr_perf_counter_() and move all the logic to
add_msr_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As the only caller of add_cstate_perf_counter_(),
add_cstate_perf_counter() just gives extra debug output on top. There is
no need to keep both functions.
Remove add_cstate_perf_counter_() and move all the logic to
add_cstate_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As the only caller of add_rapl_perf_counter_(), add_rapl_perf_counter()
just gives extra debug output on top. There is no need to keep both
functions.
Remove add_rapl_perf_counter_() and move all the logic to
add_rapl_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Quit early for unsupported RAPL counters.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
rapl_joules bit should always be checked even if
platform_features->rapl_msrs is not set or no_msr flag is used.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
commit 05a2f07db8 ("tools/power turbostat: read RAPL counters via
perf") that adds support to read RAPL counters via perf defines the
notion of a RAPL domain_id which is set to physical_core_id on
platforms which support per_core_rapl counters (Eg: AMD processors
Family 17h onwards) and is set to the physical_package_id on all the
other platforms.
However, the physical_core_id is only unique within a package and on
platforms with multiple packages more than one core can have the same
physical_core_id and thus the same domain_id. (For eg, the first cores
of each package have the physical_core_id = 0). This results in all
these cores with the same physical_core_id using the same entry in the
rapl_counter_info_perdomain[]. Since rapl_perf_init() skips the
perf-initialization for cores whose domain_ids have already been
visited, cores that have the same physical_core_id always read the
perf file corresponding to the physical_core_id of the first package
and thus the package-energy is incorrectly reported to be the same
value for different packages.
Note: This issue only arises when RAPL counters are read via perf and
not when they are read via MSRs since in the latter case the MSRs are
read separately on each core.
Fix this issue by associating each CPU with rapl_core_id which is
unique across all the packages in the system.
Fixes: 05a2f07db8 ("tools/power turbostat: read RAPL counters via perf")
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Fix typo in the currently unused RAPL_GFX_ALL macro definition.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
It uses /dev/msrN device paths on Android instead of /dev/cpu/N/msr,
updates error messages and permission checks to reflect the Android
device path, and wraps platform-specific code with #if defined(ANDROID)
to ensure correct behavior on both Android and non-Android systems.
These changes improve compatibility and usability of turbostat on
Android devices.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
this cycle regression (well, bugfix for this cycle bugfix for v6.15-rc1 regression)
do_move_mount(): split the checks in subtree-of-our-ns and entire-anon cases
selftests/mount_setattr: adapt detached mount propagation test
v6.15 fs: allow clone_private_mount() for a path on real rootfs
v6.11 fs/fhandle.c: fix a race in call of has_locked_children()
v5.15 fix propagation graph breakage by MOVE_MOUNT_SET_GROUP move_mount(2)
v5.15 clone_private_mnt(): make sure that caller has CAP_SYS_ADMIN in the right userns
v5.7 path_overmount(): avoid false negatives
v3.12 finish_automount(): don't leak MNT_LOCKED from parent to child
v2.6.15 do_change_type(): refuse to operate on unmounted/not ours mounts
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCaEXGDwAKCRBZ7Krx/gZQ
61WQAPwNBpcwum3F5fqT8rcKymqAUFpc0+rluJoBi+qfCQA9ywEAwn+Kh5qqtz++
cdVnUYQxBrh0u5IOzMEFITlgfYFJZA4=
=BIeU
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull mount fixes from Al Viro:
"Various mount-related bugfixes:
- split the do_move_mount() checks in subtree-of-our-ns and
entire-anon cases and adapt detached mount propagation selftest for
mount_setattr
- allow clone_private_mount() for a path on real rootfs
- fix a race in call of has_locked_children()
- fix move_mount propagation graph breakage by MOVE_MOUNT_SET_GROUP
- make sure clone_private_mnt() caller has CAP_SYS_ADMIN in the right
userns
- avoid false negatives in path_overmount()
- don't leak MNT_LOCKED from parent to child in finish_automount()
- do_change_type(): refuse to operate on unmounted/not ours mounts"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_change_type(): refuse to operate on unmounted/not ours mounts
clone_private_mnt(): make sure that caller has CAP_SYS_ADMIN in the right userns
selftests/mount_setattr: adapt detached mount propagation test
do_move_mount(): split the checks in subtree-of-our-ns and entire-anon cases
fs: allow clone_private_mount() for a path on real rootfs
fix propagation graph breakage by MOVE_MOUNT_SET_GROUP move_mount(2)
finish_automount(): don't leak MNT_LOCKED from parent to child
path_overmount(): avoid false negatives
fs/fhandle.c: fix a race in call of has_locked_children()
fixes a longstanding and quite obscure bug related to the vma merging of
the uprobe mmap page.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaEN1LAAKCRDdBJ7gKXxA
jsfLAQCC+C8397X6lNKPI3bHGLGEHubP2uzb6bOFMAU6fIRobQEAqUnoUhfP+xsu
tDbcQEBZ+vfyeT9Zr9vA+uBDcA3OGw0=
=9oaG
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-06-06-16-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
"The series 'Fix uprobe pte be overwritten when expanding vma' fixes a
longstanding and quite obscure bug related to the vma merging of the
uprobe mmap page"
* tag 'mm-stable-2025-06-06-16-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
selftests/mm: add test about uprobe pte be orphan during vma merge
selftests/mm: extract read_sysfs and write_sysfs into vm_util
mm: expose abnormal new_pte during move_ptes
mm: fix uprobe pte be overwritten when expanding vma
mm/damon: s/primitives/code/ on comments
or aren't considered necessary for -stable kernels. 11 are for MM.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaENzlAAKCRDdBJ7gKXxA
joNYAP9n38QNDUoRR6ChFikzzY77q4alD2NL0aqXBZdcSRXoUgEAlQ8Ea+t6xnzp
GnH+cnsA6FDp4F6lIoZBdENJyBYrkQE=
=ud9O
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-06-06-16-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"13 hotfixes.
6 are cc:stable and the remainder address post-6.15 issues or aren't
considered necessary for -stable kernels. 11 are for MM"
* tag 'mm-hotfixes-stable-2025-06-06-16-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
MAINTAINERS: add mm swap section
kmsan: test: add module description
MAINTAINERS: add tlb trace events to MMU GATHER AND TLB INVALIDATION
mm/hugetlb: fix huge_pmd_unshare() vs GUP-fast race
mm/hugetlb: unshare page tables during VMA split, not before
MAINTAINERS: add Alistair as reviewer of mm memory policy
iov_iter: use iov_offset for length calculation in iov_iter_aligned_bvec
mm/mempolicy: fix incorrect freeing of wi_kobj
alloc_tag: handle module codetag load errors as module load failures
mm/madvise: handle madvise_lock() failure during race unwinding
mm: fix vmstat after removing NR_BOUNCE
KVM: s390: rename PROT_NONE to PROT_TYPE_DUMMY
Make sure that detached trees don't receive mount propagation.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* Support for the FWFT SBI extension, which is part of SBI 3.0 and a
dependency for many new SBI and ISA extensions.
* Support for getrandom() in the VDSO.
* Support for mseal.
* Optimized routines for raid6 syndrome and recovery calculations.
* kexec_file() supports loading Image-formatted kernel binaries.
* Improvements to the instruction patching framework to allow for atomic
instruction patching, along with rules as to how systems need to
behave in order to function correctly.
* Support for a handful of new ISA extensions: Svinval, Zicbop, Zabha,
some SiFive vendor extensions.
* Various fixes and cleanups, including: misaligned access handling, perf
symbol mangling, module loading, PUD THPs, and improved uaccess
routines.
-----BEGIN PGP SIGNATURE-----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=cZGy
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.16-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the FWFT SBI extension, which is part of SBI 3.0 and a
dependency for many new SBI and ISA extensions
- Support for getrandom() in the VDSO
- Support for mseal
- Optimized routines for raid6 syndrome and recovery calculations
- kexec_file() supports loading Image-formatted kernel binaries
- Improvements to the instruction patching framework to allow for
atomic instruction patching, along with rules as to how systems need
to behave in order to function correctly
- Support for a handful of new ISA extensions: Svinval, Zicbop, Zabha,
some SiFive vendor extensions
- Various fixes and cleanups, including: misaligned access handling,
perf symbol mangling, module loading, PUD THPs, and improved uaccess
routines
* tag 'riscv-for-linus-6.16-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (69 commits)
riscv: uaccess: Only restore the CSR_STATUS SUM bit
RISC-V: vDSO: Wire up getrandom() vDSO implementation
riscv: enable mseal sysmap for RV64
raid6: Add RISC-V SIMD syndrome and recovery calculations
riscv: mm: Add support for Svinval extension
RISC-V: Documentation: Add enough title underlines to CMODX
riscv: Improve Kconfig help for RISCV_ISA_V_PREEMPTIVE
MAINTAINERS: Update Atish's email address
riscv: uaccess: do not do misaligned accesses in get/put_user()
riscv: process: use unsigned int instead of unsigned long for put_user()
riscv: make unsafe user copy routines use existing assembly routines
riscv: hwprobe: export Zabha extension
riscv: Make regs_irqs_disabled() more clear
perf symbols: Ignore mapping symbols on riscv
RISC-V: Kconfig: Fix help text of CMDLINE_EXTEND
riscv: module: Optimize PLT/GOT entry counting
riscv: Add support for PUD THP
riscv: xchg: Prefetch the destination word for sc.w
riscv: Add ARCH_HAS_PREFETCH[W] support with Zicbop
riscv: Add support for Zicbop
...
-----BEGIN PGP SIGNATURE-----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=gs32
-----END PGP SIGNATURE-----
Merge tag 'block-6.16-20250606' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- NVMe pull request via Christoph:
- TCP error handling fix (Shin'ichiro Kawasaki)
- TCP I/O stall handling fixes (Hannes Reinecke)
- fix command limits status code (Keith Busch)
- support vectored buffers also for passthrough (Pavel Begunkov)
- spelling fixes (Yi Zhang)
- MD pull request via Yu:
- fix REQ_RAHEAD and REQ_NOWAIT IO err handling for raid1/10
- fix max_write_behind setting for dm-raid
- some minor cleanups
- Integrity data direction fix and cleanup
- bcache NULL pointer fix
- Fix for loop missing write start/end handling
- Decouple hardware queues and IO threads in ublk
- Slew of ublk selftests additions and updates
* tag 'block-6.16-20250606' of git://git.kernel.dk/linux: (29 commits)
nvme: spelling fixes
nvme-tcp: fix I/O stalls on congested sockets
nvme-tcp: sanitize request list handling
nvme-tcp: remove tag set when second admin queue config fails
nvme: enable vectored registered bufs for passthrough cmds
nvme: fix implicit bool to flags conversion
nvme: fix command limits status code
selftests: ublk: kublk: improve behavior on init failure
block: flip iter directions in blk_rq_integrity_map_user()
block: drop direction param from bio_integrity_copy_user()
selftests: ublk: cover PER_IO_DAEMON in more stress tests
Documentation: ublk: document UBLK_F_PER_IO_DAEMON
selftests: ublk: add stress test for per io daemons
selftests: ublk: add functional test for per io daemons
selftests: ublk: kublk: decouple ublk_queues from ublk server threads
selftests: ublk: kublk: move per-thread data out of ublk_queue
selftests: ublk: kublk: lift queue initialization out of thread
selftests: ublk: kublk: tie sqe allocation to io instead of queue
selftests: ublk: kublk: plumb q_id in io_uring user_data
ublk: have a per-io daemon instead of a per-queue daemon
...
Here is the big char/misc/iio and other small driver subsystem pull
request for 6.16-rc1.
Overall, a lot of individual changes, but nothing major, just the normal
constant forward progress of new device support and cleanups to existing
subsystems. Highlights in here are:
- Large IIO driver updates and additions and device tree changes
- Android binder bugfixes and logfile fixes
- mhi driver updates
- comedi driver updates
- counter driver updates and additions
- coresight driver updates and additions
- echo driver removal as there are no in-kernel users of it
- nvmem driver updates
- spmi driver updates
- new amd-sbi driver "subsystem" and drivers added
- rust miscdriver binding documentation fix
- other small driver fixes and updates (uio, w1, acrn, hpet, xillybus,
cardreader drivers, fastrpc and others.)
All of these have been in linux-next for quite a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaEKg5Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykUyACgmAzrzKMoQUwwhQ6ed2l7tHdrlOcAoIORI1/x
pNqQdrE1EbmAAyl47IN4
=ts6J
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / iio driver updates from Greg KH:
"Here is the big char/misc/iio and other small driver subsystem pull
request for 6.16-rc1.
Overall, a lot of individual changes, but nothing major, just the
normal constant forward progress of new device support and cleanups to
existing subsystems. Highlights in here are:
- Large IIO driver updates and additions and device tree changes
- Android binder bugfixes and logfile fixes
- mhi driver updates
- comedi driver updates
- counter driver updates and additions
- coresight driver updates and additions
- echo driver removal as there are no in-kernel users of it
- nvmem driver updates
- spmi driver updates
- new amd-sbi driver "subsystem" and drivers added
- rust miscdriver binding documentation fix
- other small driver fixes and updates (uio, w1, acrn, hpet,
xillybus, cardreader drivers, fastrpc and others)
All of these have been in linux-next for quite a while with no
reported problems"
* tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (390 commits)
binder: fix yet another UAF in binder_devices
counter: microchip-tcb-capture: Add watch validation support
dt-bindings: iio: adc: Add ROHM BD79100G
iio: adc: add support for Nuvoton NCT7201
dt-bindings: iio: adc: add NCT7201 ADCs
iio: chemical: Add driver for SEN0322
dt-bindings: trivial-devices: Document SEN0322
iio: adc: ad7768-1: reorganize driver headers
iio: bmp280: zero-init buffer
iio: ssp_sensors: optimalize -> optimize
HID: sensor-hub: Fix typo and improve documentation
iio: admv1013: replace redundant ternary operator with just len
iio: chemical: mhz19b: Fix error code in probe()
iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS
iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS
iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS
iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
iio: make IIO_DMA_MINALIGN minimum of 8 bytes
...
Currently, __split_vma() triggers hugetlb page table unsharing through
vm_ops->may_split(). This happens before the VMA lock and rmap locks are
taken - which is too early, it allows racing VMA-locked page faults in our
process and racing rmap walks from other processes to cause page tables to
be shared again before we actually perform the split.
Fix it by explicitly calling into the hugetlb unshare logic from
__split_vma() in the same place where THP splitting also happens. At that
point, both the VMA and the rmap(s) are write-locked.
An annoying detail is that we can now call into the helper
hugetlb_unshare_pmds() from two different locking contexts:
1. from hugetlb_split(), holding:
- mmap lock (exclusively)
- VMA lock
- file rmap lock (exclusively)
2. hugetlb_unshare_all_pmds(), which I think is designed to be able to
call us with only the mmap lock held (in shared mode), but currently
only runs while holding mmap lock (exclusively) and VMA lock
Backporting note:
This commit fixes a racy protection that was introduced in commit
b30c14cd61 ("hugetlb: unshare some PMDs when splitting VMAs"); that
commit claimed to fix an issue introduced in 5.13, but it should actually
also go all the way back.
[jannh@google.com: v2]
Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-1-1329349bad1a@google.com
Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-0-1329349bad1a@google.com
Link: https://lkml.kernel.org/r/20250527-hugetlb-fixes-splitrace-v1-1-f4136f5ec58a@google.com
Fixes: 39dde65c99 ("[PATCH] shared page table for hugetlb page")
Signed-off-by: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [b30c14cd6102: hugetlb: unshare some PMDs when splitting VMAs]
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Extract read_sysfs and write_sysfs into vm_util. Meanwhile, rename the
function in thuge-gen that has the same name as read_sysfs.
Link: https://lkml.kernel.org/r/20250529155650.4017699-4-pulehui@huaweicloud.com
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
riscv patches for 6.16-rc1, part 2
* Performance improvements
- Add support for vdso getrandom
- Implement raid6 calculations using vectors
- Introduce svinval tlb invalidation
* Cleanup
- A bunch of deduplication of the macros we use for manipulating instructions
* Misc
- Introduce a kunit test for kprobes
- Add support for mseal as riscv fits the requirements (thanks to Lorenzo for making sure of that :))
[Palmer: There was a rebase between part 1 and part 2, so I've had to do
some more git surgery here... at least two rounds of surgery...]
* alex-pr-2: (866 commits)
RISC-V: vDSO: Wire up getrandom() vDSO implementation
riscv: enable mseal sysmap for RV64
raid6: Add RISC-V SIMD syndrome and recovery calculations
riscv: mm: Add support for Svinval extension
riscv: Add kprobes KUnit test
riscv: kprobes: Remove duplication of RV_EXTRACT_ITYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_UTYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_RD_REG
riscv: kprobes: Remove duplication of RVC_EXTRACT_BTYPE_IMM
riscv: kprobes: Remove duplication of RVC_EXTRACT_C2_RS1_REG
riscv: kproves: Remove duplication of RVC_EXTRACT_JTYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_BTYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_RS1_REG
riscv: kprobes: Remove duplication of RV_EXTRACT_JTYPE_IMM
riscv: kprobes: Move branch_funct3 to insn.h
riscv: kprobes: Move branch_rs2_idx to insn.h
Linux 6.15-rc6
Input: xpad - fix xpad_device sorting
Input: xpad - add support for several more controllers
Input: xpad - fix Share button on Xbox One controllers
...
Hook up the generic vDSO implementation to the generic vDSO getrandom
implementation by providing the required __arch_chacha20_blocks_nostack
and getrandom_syscall implementations. Also wire up the selftests.
The benchmark result:
vdso: 25000000 times in 2.466341333 seconds
libc: 25000000 times in 41.447720005 seconds
syscall: 25000000 times in 41.043926672 seconds
vdso: 25000000 x 256 times in 162.286219353 seconds
libc: 25000000 x 256 times in 2953.855018685 seconds
syscall: 25000000 x 256 times in 2796.268546000 seconds
[ alex: - Fix dynamic relocation
- Squash Nathan's fix https://lore.kernel.org/all/20250423-riscv-fix-compat_vdso-lld-v2-1-b7bbbc244501@kernel.org/
- Add comment from Loongarch ]
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Link: https://lore.kernel.org/r/20250411024600.16045-1-xry111@xry111.site
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
