When copying plane color state in a joiner configuration, use the plane in
the primary joiner pipe since it carries the pipeline number selected by
the user-space.
This assumes that all pipes in the joiner are symmetric in their plane
color capabilities.
Cc: stable@vger.kernel.org # v6.19+
Fixes: a78f1b6baf ("drm/i915/color: Add framework to program CSC")
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260511053213.3122314-2-chaitanya.kumar.borah@intel.com
(cherry picked from commit e8308fb5e0)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
batadv_mcast_purge_orig() removes entries from RCU-protected hlists but
does not wait for an RCU grace period before returning. Concurrent RCU
readers may still accesses references to those entries at the point of
removal. RCU-protected readers trying to operate on entries like
orig->mcast_want_all_ipv6_node will then access already freed memory.
Fix this by moving batadv_mcast_purge_orig() to batadv_orig_node_release(),
just before the call_rcu() invocation. This ensures RCU readers that were
active at purge time have drained before the orig_node memory is reclaimed.
Cc: stable@kernel.org
Fixes: ab49886e3d ("batman-adv: Add IPv4 link-local/IPv6-ll-all-nodes multicast support")
Acked-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Session lookups in tp_list matched only on destination address (and
optionally session ID), leaving role validation to the caller. If two
sessions with the same other_end coexisted (one as sender, one as receiver)
a lookup could silently return the wrong one, causing the caller's role to
bail out early, potentially skipping necessary cleanup.
Move the role check into the lookup functions themselves so the correct
entry is always returned, or none at all. Since batadv_tp_start()
legitimately needs to detect any active session to a destination regardless
of role, introduce a dedicated helper for that case rather than bending the
existing lookup semantics.
Cc: stable@kernel.org
Fixes: 33a3bb4a33 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
batadv_tp_sender_shutdown() previously used two separate variables to track
session state: sending (an atomic flag indicating whether the session was
active) and reason (a plain enum storing the stop reason). This introduced
a race window between the two writes: after sending was cleared to 0,
batadv_tp_send() could observe the stopped state and call
batadv_tp_sender_end() before reason was written, causing the wrong stop
reason to be reported to the caller.
Fix this by consolidating both variables into a single atomic send_result,
which holds 0 while the session is running and the stop reason once it
ends.
Cc: stable@kernel.org
Fixes: 33a3bb4a33 ("batman-adv: throughput meter implementation")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
batadv_tvlv_container_ogm_append() builds a TVLV packet section from
the tvlv.container_list. The total size of this section is computed by
batadv_tvlv_container_list_size(), which sums the sizes of all registered
containers.
The return type and accumulator in batadv_tvlv_container_list_size() were
u16. If the accumulated size exceeds U16_MAX, the value wraps around,
causing the subsequent allocation in batadv_tvlv_container_ogm_append()
to be undersized. The memcpy-style copy that follows would then write
beyond the end of the allocated buffer, corrupting kernel memory.
Fix this by widening the return type of batadv_tvlv_container_list_size()
to size_t. In batadv_tvlv_container_ogm_append(), check the computed length
against U16_MAX before proceeding, and bail out as if the allocation had
failed when the limit is exceeded.
Cc: stable@kernel.org
Fixes: ef26157747 ("batman-adv: tvlv - basic infrastructure")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Reviewed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
batadv_tvlv_container_ogm_append() could fail in two ways: a memory
allocation failure when resizing the packet buffer, or the tvlv data
exceeding U16_MAX bytes. In both cases the function previously returned the
old (now stale) tvlv_value_len rather than signalling an error, causing the
OGM/OGM2 send path to transmit a packet whose TVLV length field no longer
matched the actual buffer contents. And because it also didn't fill in the
new TVLV data, sending either uninitialized or corrupted data on the wire.
All errors in batadv_tvlv_container_ogm_append() must be forwarded to the
caller. And the caller must abort the send of the OGM2. For B.A.T.M.A.N.
IV, it is currently not allowed to abort the send. The non-TVLV part of the
OGM must be queued up instead.
Cc: stable@kernel.org
Fixes: ef26157747 ("batman-adv: tvlv - basic infrastructure")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
When a batadv_hard_iface is disabled, its mesh_iface pointer is set to
NULL. However, batadv_v_ogm_send_meshif() may still dispatch OGMs via
batadv_v_ogm_queue_on_if() for interfaces that have since lost their
mesh_iface association. This results in a NULL pointer dereference when
batadv_v_ogm_queue_on_if() unconditionally calls netdev_priv() on the
now NULL hard_iface->mesh_iface to retrieve the batadv_priv.
It is necessary to ensure that the batadv_v_ogm_queue_on_if() checks that
it is using the same mesh_iface for which batadv_v_ogm_send_meshif() was
called.
Cc: stable@kernel.org
Fixes: 0da0035942 ("batman-adv: OGMv2 - add basic infrastructure")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Reviewed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
find_format_descriptor() walks the class-specific interface extras by
advancing with bLength. It rejects descriptors that extend past the
remaining buffer, but it does not reject descriptor lengths smaller than
a USB descriptor header.
Reject too-short descriptors before using bLength to advance the local
scan. This keeps the UA-101 parser robust against malformed descriptor
data and matches the usual USB descriptor walking rules.
Fixes: 63978ab3e3 ("sound: add Edirol UA-101 support")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260519-alsa-ua101-desc-len-v1-1-4307d1a5e054@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_seq_create_port() walks client->ports_list_head looking for
the ordered insertion point and on loop fall-through passes
&p->list to list_add_tail():
list_for_each_entry(p, &client->ports_list_head, list) {
if (p->addr.port == port) {
kfree(new_port);
return -EBUSY;
}
if (p->addr.port > num)
break;
...
}
list_add_tail(&new_port->list, &p->list);
When the loop walks all entries without break (e.g., the new
port sorts last), p is past-the-end. &p->list aliases
&client->ports_list_head (the list head) via container_of offset
cancellation, so the insert lands at the list tail. That is the
intended behaviour, but the access is undefined per C11 even
though it works in practice.
Track an explicit insert_before pointer initialised to the list
head and overwritten to &p->list only when the loop breaks
early. The observable behaviour is unchanged.
Fixes: 9244b2c307 ("[ALSA] alsa core: convert to list_for_each_entry*")
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Link: https://patch.msgid.link/20260518194023.1667857-3-maoyixie.tju@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_timer_dev_register() walks snd_timer_list looking for the
ordered insertion point and on loop fall-through passes
&timer1->device_list to list_add_tail():
list_for_each_entry(timer1, &snd_timer_list, device_list) {
...
break; /* on found-position */
...
}
list_add_tail(&timer->device_list, &timer1->device_list);
When the loop walks all entries without break, timer1 is
past-the-end. &timer1->device_list aliases &snd_timer_list (the
list head) via container_of offset cancellation, so the insert
lands at the list tail. That is the intended behaviour, but the
access is undefined per C11 even though it works in practice.
Track an explicit insert_before pointer initialised to the list
head and overwritten to &timer1->device_list only when the loop
breaks early. The observable behaviour is unchanged.
Fixes: 9244b2c307 ("[ALSA] alsa core: convert to list_for_each_entry*")
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Link: https://patch.msgid.link/20260518194023.1667857-2-maoyixie.tju@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-05-15 (ice, ixgbevf, igc, e1000e)
For ice:
Jake fixes a mismatch in locking around wait queue usage.
Jose Ignacio Tornos Martinez adjusts allowed lower bound for VF data
buffer size to accommodate low MTU sizes.
Marcin adjusts for -EEXIST to not trigger error path when the promisc
filter already exists as part of adding VLAN Ids.
Grzegorz fixes a few issues related to PTP. He adds locking to
ice_start_phy_timer_eth56g() to protect proper register programming.
Fixes the PTP lock used in 2xNAC configuration to always be the primary
and restores PTP configuration on ethtool channel changes.
For ixgbevf:
Michael Bommarito sets freed skb pointer to NULL to prevent
use-after-free.
For igc:
Kohei Enju resolves a couple of issues reported by Sashiko; setting
buffer type for an SMD skb and freeing skb on error of
igc_fpe_init_tx_descriptor().
====================
Link: https://patch.msgid.link/20260515182419.1597859-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When igc_fpe_init_tx_descriptor() fails, no one takes care of an
allocated skb, leaking it. [1]
Use dev_kfree_skb_any() on failure.
Tested on an I226 adapter with the following command, while injecting
faults in igc_fpe_init_tx_descriptor() to trigger the error path.
# ethtool --set-mm $DEV verify-enabled on tx-enabled on pmac-enabled on
[1]
unreferenced object 0xffff888113c6cdc0 (size 224):
...
backtrace (crc be3d3fda):
kmem_cache_alloc_node_noprof+0x3b1/0x410
__alloc_skb+0xde/0x830
igc_fpe_xmit_smd_frame.isra.0+0xad/0x1b0
igc_fpe_send_mpacket+0x37/0x90
ethtool_mmsv_verify_timer+0x15e/0x300
Cc: stable@vger.kernel.org
Fixes: 5422570c00 ("igc: add support for frame preemption verification")
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260515182419.1597859-10-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko pointed out that igc_fpe_init_smd_frame() initializes
igc_tx_buffer fields for an SMD skb, but does not set the buffer type:
https://sashiko.dev/#/patchset/20260415025226.114115-1-kohei%40enjuk.jp
Since igc_tx_buffer entries are reused, a stale XDP or XSK type can
remain and make TX completion use the wrong cleanup path.
Set the buffer type to IGC_TX_BUFFER_TYPE_SKB.
Fixes: 5422570c00 ("igc: add support for frame preemption verification")
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260515182419.1597859-9-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF's
own address (VEPA multicast workaround) by freeing the skb and
continuing to the next descriptor:
dev_kfree_skb_irq(skb);
continue;
The skb pointer is declared outside the while loop and persists across
iterations. Because the continue skips the "skb = NULL" reset at the
bottom of the loop, the next iteration enters the "else if (skb)" path
and calls ixgbevf_add_rx_frag() on the freed skb, dereferencing
skb_shinfo(skb)->nr_frags - a use-after-free in NAPI softirq context.
The sibling driver iavf already handles this correctly by nulling the
pointer before continuing. Apply the same pattern here.
I do not have ixgbevf hardware; the bug was found by static analysis
(scan_drop_continue_loops.py + semgrep drop_continue_in_loop, multi-tool
corroboration with the highest score in the scan). The UAF was confirmed
under KASAN by loading a test module that reproduces the exact code
pattern (alloc skb, kfree_skb, then read skb_shinfo(skb)->nr_frags):
BUG: KASAN: slab-use-after-free in ixgbevf_uaf_test_init+0x100/0x1000
Read of size 8 at addr 000000006163ae78 by task insmod/30
freed 208-byte region [000000006163adc0, 000000006163ae90)
QEMU emulates igb (82576) but not ixgbe (82599), and the igbvf VF
driver does not include the VEPA source pruning path, so a full
end-to-end reproduction with emulated hardware was not possible.
Fixes: bad17234ba ("ixgbevf: Change receive model to use double buffered page based receives")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260515182419.1597859-8-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When ethtool -L changes queue counts, ice_vsi_recfg_qs() closes and
rebuilds the VSI, reallocating Rx rings. The newly allocated rings have
ptp_rx cleared, so RX hardware timestamps are no longer attached to skb
until hwtstamp configuration is applied again.
Restore timestamp mode after ice_vsi_open() in the queue reconfiguration
path, matching reset/rebuild behavior and ensuring newly rebuilt Rx rings
have PTP RX timestamping re-enabled.
Testing hints:
- run ptp4l application in client synchronization mode:
ptp4l -i ethX -m -s
- run PTP traffic
- change queue number on ethX netdev interface:
ethtool -L ethX combined new_queue_size
- observe ptp4l output
- expected result: no "received DELAY_REQ without timestamp" messages
Fixes: 77a781155a ("ice: enable receive hardware timestamping")
Cc: stable@vger.kernel.org
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260515182419.1597859-7-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For E825 2xNAC configurations, PTP semaphore operations must hit the
primary NAC register block so both sides coordinate on the same lock.
Commit e2193f9f9e ("ice: enable timesync operation on 2xNAC E825
devices") updated other primary-only PTP register accesses to
use the primary NAC on non-primary functions, but left ice_ptp_lock()
and ice_ptp_unlock() operating on the local NAC. As a result, secondary
NAC PTP paths can take a different semaphore than the primary side.
Select the primary hardware in ice_ptp_lock() and ice_ptp_unlock() when
the current function is not primary, keeping semaphore operations
symmetric and consistent with the rest of the 2xNAC PTP register access
path.
Fixes: e2193f9f9e ("ice: enable timesync operation on 2xNAC E825 devices")
Reviewed-by: Arkadiusz Kubalewski <Arkadiusz.kubalewski@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260515182419.1597859-6-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ice_start_phy_timer_eth56g() programs TIMETUS registers and issues
INIT_INCVAL without holding the global PTP semaphore.
This allows concurrent PTP command paths to interleave with PHY timer
start, which can make the sequence fail and leave timer initialization
inconsistent.
Take the PTP lock around TIMETUS registers programming and INIT_INCVAL
command execution, and make sure the lock is released on all error paths.
Keep the subsequent sync step outside of this critical section, since
ice_sync_phy_timer_eth56g() takes the same semaphore internally.
Fixes: 7cab44f1c3 ("ice: Introduce ETH56G PHY model for E825C products")
Reviewed-by: Arkadiusz Kubalewski <Arkadiusz.kubalewski@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260515182419.1597859-5-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are at least two paths through which VSI promiscuous mode can be
independently configured via ice_fltr_set_vsi_promisc():
- ice_vlan_rx_add_vid() (netdev op)
- ice_service_task() -> ... -> ice_set_promisc()
Both paths may try to program promiscuous mode concurrently. One such
scenario is:
1. Add ice netdev to bond
2. Add the bond netdev to bridge
3. ice netdev enters allmulticast mode (IFF_ALLMULTI)
4. Service task programs promisc mode filter
5. Bridge -> bond calls ice_vlan_rx_add_vid()
Crucially, ice_vlan_rx_add_vid() fails if ice_fltr_set_vsi_promisc()
returns any error, including -EEXIST. This causes VLAN filtering setup
to fail on the bond interface. ice_set_promisc() already handles -EEXIST
correctly.
Fix by adding the same -EEXIST check to ice_vlan_rx_add_vid(): if the
promisc filter is already programmed, continue without returning error.
Fixes: 1273f89578 ("ice: Fix broken IFF_ALLMULTI handling")
Cc: stable@vger.kernel.org
Signed-off-by: Marcin Szycik <marcin.szycik@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260515182419.1597859-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ice driver's VF queue configuration validation rejects
databuffer_size values below 1024 bytes, which prevents VFs from
using MTU values below 871 bytes.
The iavf driver calculates databuffer_size based on the MTU using:
databuffer_size = ALIGN(MTU + LIBETH_RX_LL_LEN, 128)
where LIBETH_RX_LL_LEN = 26 (ETH_HLEN + 2*VLAN_HLEN + ETH_FCS_LEN).
For MTU values below 871:
MTU 870: 870 + 26 = 896, aligned to 128 = 896 (< 1024, rejected)
MTU 871: 871 + 26 = 897, aligned to 128 = 1024 (>= 1024, accepted)
The 1024-byte minimum seems unnecessarily restrictive, because the hardware
supports databuffer_size as low as 128 bytes (the alignment boundary),
which should allow MTU values down to the standard minimum of 68 bytes.
I haven't found the reason why the limit was configured in the commit
9c7dd7566d ("ice: add validation in OP_CONFIG_VSI_QUEUES VF message"), so
with no more information and since it is working, change the minimum
databuffer_size validation from 1024 to 128 bytes to allow standard low
MTU values while still preventing invalid configurations.
Fixes: 9c7dd7566d ("ice: add validation in OP_CONFIG_VSI_QUEUES VF message")
cc: stable@vger.kernel.org
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260515182419.1597859-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 50327223a8 ("ice: add lock to protect low latency interface")
introduced a wait queue used to protect the low latency timer interface.
The queue is used with the wait_event_interruptible_locked_irq macro, which
unlocks the wait queue lock while sleeping. The irq variant uses
spin_lock_irq and spin_unlock_irq to manage this. The wait queue lock was
previously locked using spin_lock_irqsave. This difference in lock variants
could lead to issues, since wait_event would unlock the wait queue and
restore interrupts while sleeping.
The ice_read_phy_tstamp_ll_e810() function is ultimately called through
ice_read_phy_tstamp, which is called from ice_ptp_process_tx_tstamp or
ice_ptp_clear_unexpected_tx_ready. The former is called through the
miscellaneous IRQ thread function, while the latter is called from the
service task work queue thread. Neither of these functions has interrupts
disabled, so use spin_lock_irq instead of spin_lock_irqsave.
Fixes: 50327223a8 ("ice: add lock to protect low latency interface")
Cc: stable@vger.kernel.org
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20250109181823.77f44c69@kernel.org/
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260515182419.1597859-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
An usual sync-up for the header files and related codes.
- copy headers that are used for perf trace syscall beautifier
- update the beautifier scripts according to the changes
- not to show differences in the headers by default
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCagtsFwAKCRCMstVUGiXM
g4a3AQCb5NSggS+pmpy3/N9lvKMf61SQ968zgqW3TkMR7HpnaQD/X1Dih2bXwAdV
jKLib/OHsDX9BMgErOVCp9iJJlH8CwM=
=WQkZ
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v7.1-2026-05-18' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf-tools fixes
"An usual sync-up for the header files and related code:
- copy headers that are used for perf trace syscall beautifier
- update the beautifier scripts according to the changes
- don't show differences in the headers by default"
* tag 'perf-tools-fixes-for-v7.1-2026-05-18' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf trace: Update beautifier script for clone flags
perf trace: Add beautifier script for fsmount flags
perf build: Add make check-headers target
perf trace: Sync uapi/linux/sched.h with the kernel source
perf trace: Sync uapi/linux/mount.h with the kernel source
perf trace: Sync uapi/linux/fs.h with the kernel source
perf trace: Sync linux/socket.h with the kernel source
-----BEGIN PGP SIGNATURE-----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=rsHV
-----END PGP SIGNATURE-----
Merge tag 'nf-26-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for net:
1) Fix small race windows in nf_ct_helper_log() when accessing helper,
from Florian Westphal.
2) Fix potential infinite loop and race conditions in IPVS caused by
frequent user-triggered service table changes, from Julia Anastasov.
3) Fix a race condition when dumping ipsets for restore,
from Jozsef Kadlecsik.
4) Fix inner transport offset in IPv6 in nft_inner when extension
headers come before the layer 4 transport header, from Yizhou Zhao.
5) Fix incorrect iteration over IPv4 ranges in several hash set types,
from Nan Li.
6) Fix incorrect order when restoring BH in nft_inner_restore_tun_ctx(),
from Florian Westphal.
7) Validate option array from ip6t_hbh checkpath() to fix an off-by-one
access, from Zhengchuan Liang.
8) Fix race condition between ipset list -terse and concurrent updates,
from Jozsef Kadlecisk.
9) Fix race condition when inserting elements into a hash bucket, also
from Jozsef.
10) Annotate access to first free slot in hashtable, from Jozsef Kadlecsik.
11) Ensure sufficient headroom in br_netfilter neigh transmission,
from Lorenzo Bianconi.
12) Hold reference on skb->dev in nfqueue exit path, bridge local input
is speciall since skb->dev != state->indev, allowing for net_device
to go away while packet is sitting in nfqueue. From Haoze Xie.
* tag 'nf-26-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_queue: hold bridge skb->dev while queued
netfilter: br_netfilter: Reallocate headroom if necessary in neigh_hh_bridge()
netfilter: ipset: annotate "pos" for concurrent readers/writers
netfilter: ipset: Fix data race between add and dump in all hash types
netfilter: ipset: Fix data race between add and list header in all hash types
netfilter: ip6t_hbh: reject oversized option lists
netfilter: nft_inner: release local_lock before re-enabling softirqs
netfilter: ipset: stop hash:* range iteration at end
netfilter: nft_inner: Fix IPv6 inner_thoff desync
netfilter: ipset: fix a potential dump-destroy race
ipvs: avoid possible loop in ip_vs_dst_event on resizing
netfilter: nf_conntrack_helper: fix possible null deref during error log
====================
Link: https://patch.msgid.link/20260516115627.967773-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- fix tp_meter counter underflow during shutdown, by Luxiao Xu
- fix tp_meter tp_vars reference leak in receiver shutdown,
by Sven Eckelmann
- fix various translation table integer handling issues,
by Sven Eckelmann (3 patches)
- fix various translation table counter issues,
by Sven Eckelmann (3 patches)
- fix fragment reassembly length accounting, by Ruide Cao
- clear current gateway during teardown, by Ruijie Li
- handle forward allocation error in DAT, by Sven Eckelmann
- tp_meter: avoid use of uninitialized sender variables in tp_meter,
by Sven Eckelmann
- disallow unicast fragment in fragment, by Sven Eckelmann
- directly shut down tp_meter timer on cleanup, by Sven Eckelmann
-----BEGIN PGP SIGNATURE-----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=C54U
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20260515' of https://git.open-mesh.org/batadv
Simon Wunderlich says:
====================
Here are various batman-adv bugfixes:
- fix tp_meter counter underflow during shutdown, by Luxiao Xu
- fix tp_meter tp_vars reference leak in receiver shutdown,
by Sven Eckelmann
- fix various translation table integer handling issues,
by Sven Eckelmann (3 patches)
- fix various translation table counter issues,
by Sven Eckelmann (3 patches)
- fix fragment reassembly length accounting, by Ruide Cao
- clear current gateway during teardown, by Ruijie Li
- handle forward allocation error in DAT, by Sven Eckelmann
- tp_meter: avoid use of uninitialized sender variables in tp_meter,
by Sven Eckelmann
- disallow unicast fragment in fragment, by Sven Eckelmann
- directly shut down tp_meter timer on cleanup, by Sven Eckelmann
* tag 'batadv-net-pullrequest-20260515' of https://git.open-mesh.org/batadv:
batman-adv: tp_meter: directly shut down timer on cleanup
batman-adv: frag: disallow unicast fragment in fragment
batman-adv: tp_meter: avoid use of uninit sender vars
batman-adv: dat: handle forward allocation error
batman-adv: clear current gateway during teardown
batman-adv: fix fragment reassembly length accounting
batman-adv: tt: prevent TVLV entry number overflow
batman-adv: tt: avoid empty VLAN responses
batman-adv: tt: fix TOCTOU race for reported vlans
batman-adv: tt: fix negative last_changeset_len
batman-adv: tt: fix negative tt_buff_len
batman-adv: tt: reject oversized local TVLV buffers
batman-adv: tp_meter: fix tp_vars reference leak in receiver shutdown
batman-adv: fix tp_meter counter underflow during shutdown
====================
Link: https://patch.msgid.link/20260515095540.325586-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko reports that it is technically possible that we got the device
reference, but by the time we're linking it to the OVS datapath, it
may be already in the process of being deleted. In this case if the
notifier wins the race for RTNL, it will see that the device is not
yet in the OVS datapath (ovs_netdev_get_vport() will fail in the
dp_device_event()) and will do nothing. Then the ovs_netdev_link()
will take the RTNL and link the unregistering device to OVS datapath.
Eventually, netdev_wait_allrefs_any() will re-broadcast the event and
the device will be properly detached, but it will take at least a
second before that happens, so it's not something we should rely on.
Let's avoid linking the non-registered device in the first place.
Note: As per documentation, RTNL doesn't protect the reg_state, but
it actually does for all the state transitions we care about here,
so it should not be necessary to use READ_ONCE or taking the instance
lock. We can still do that, but we have a few more places even in
this file where the reg_state is accessed without those while under
RTNL, and many more places like this across the kernel code, so it
might make more sense to change all of them in a more centralized
fashion in the future, if necessary.
Fixes: ccb1352e76 ("net: Add Open vSwitch kernel components.")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20260514184702.2461435-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rmnet_dellink() removes the endpoint from the hash table with
hlist_del_init_rcu() and then immediately frees it with kfree(). However,
RCU readers on the receive path (rmnet_rx_handler ->
__rmnet_map_ingress_handler) may still hold a reference to the endpoint and
dereference ep->egress_dev after the memory has been freed. The endpoint is
a kmalloc-32 object, and the stale read at offset 8 corresponds to the
egress_dev pointer.
BUG: unable to handle page fault for address: ffffffffde942eef
Oops: 0002 [#1] SMP NOPTI
CPU: 1 UID: 0 PID: 137 Comm: poc_write Not tainted 7.0.0+ #4 PREEMPTLAZY
RIP: 0010:rmnet_vnd_rx_fixup (rmnet_vnd.c:27)
Call Trace:
<TASK>
__rmnet_map_ingress_handler (rmnet_handlers.c:48 rmnet_handlers.c:101)
rmnet_rx_handler (rmnet_handlers.c:129 rmnet_handlers.c:235)
__netif_receive_skb_core.constprop.0 (net/core/dev.c:6096)
__netif_receive_skb_one_core (net/core/dev.c:6208)
netif_receive_skb (net/core/dev.c:6467)
tun_get_user (drivers/net/tun.c:1955)
tun_chr_write_iter (drivers/net/tun.c:2003)
vfs_write (fs/read_write.c:688)
ksys_write (fs/read_write.c:740)
</TASK>
Add an rcu_head field to struct rmnet_endpoint and replace kfree() with
kfree_rcu() so the endpoint memory remains valid through the RCU grace
period. Also remove the rmnet_vnd_dellink() call and inline only the
nr_rmnet_devs decrement, since rmnet_vnd_dellink() would set
ep->egress_dev to NULL during the grace period, creating a data race
with lockless readers.
Fixes: ceed73a2cf ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260514122511.3083479-2-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
aarp_send_ddp() calls atalk_find_dev_addr(dev) in the LocalTalk fast
path without checking for NULL. When the device has no AppleTalk
interface configured (dev->atalk_ptr == NULL), this leads to a NULL
pointer dereference at the at->s_net access.
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:aarp_send_ddp (net/appletalk/aarp.c:552 (discriminator 2))
Call Trace:
<TASK>
atalk_sendmsg (net/appletalk/ddp.c:1715)
__sys_sendto (net/socket.c:2265 (discriminator 1))
__x64_sys_sendto (net/socket.c:2272)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Add a NULL check consistent with the other callers of
atalk_find_dev_addr().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260514123806.3085961-3-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During napi poll, when the affinity changes and there's still XSK work
to be done, we trigger an ICOSQ interrupt on the new CPU. However, this
triggering on the ICOSQ is done unprotected.
There are 2 such races:
A) mlx5e_trigger_irq() is called while mlx5e_xsk_alloc_rx_mpwqe() is
running from a different CPU due to affinity change. This can happen
because IRQ triggering is done after napi_complete_done(). At this point
the NAPI can be scheduled on a different CPU. Like this:
CPU A (old affinity, NAPI tail) CPU B (new affinity, fresh NAPI)
------------------------------- --------------------------------
napi_complete_done() clears SCHED
mlx5e_cq_arm(...)
napi_schedule_prep() sets SCHED
mlx5e_napi_poll()
mlx5e_xsk_alloc_rx_mpwqe()
mlx5e_icosq_sync_lock() // noop
memcpy 640 B UMR body
advance sq->pc by 10
mlx5e_trigger_irq(&c->icosq)
wqe_info[pi] = {NOP, 1}
mlx5e_post_nop() advances sq->pc
B) mlx5e_trigger_irq() is called on the ICOSQ when
mlx5e_trigger_napi_icosq() is running.
The obvious fix would be to lock the ICOSQ. But ICOSQ has an optimized
locking scheme that doesn't work for this scenario. Kick the async ICOSQ
instead which is always locked.
This issue was noticed in the wild with the following splat:
netdevice: ge-0-0-1: Bad OP in ICOSQ CQE: 0xd
WARNING: drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:826 [...]
[...]
Call Trace:
<IRQ>
mlx5e_napi_poll+0x11d/0x7f0 [mlx5_core]
__napi_poll+0x30/0x200
? skb_defer_free_flush+0x9c/0xc0
net_rx_action+0x2fe/0x3f0
handle_softirqs+0xd8/0x340
__irq_exit_rcu+0xbc/0xe0
common_interrupt+0x85/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x26/0x40
[...]
---[ end trace 0000000000000000 ]---
mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2022, qn 0x8f4,
opcode 0xd, syndrome 0x2, vendor syndrome 0x68
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 01 00 68 02 01 00 08 f4 de 14 59 d2
WQE DUMP: WQ size 16384 WQ cur size 0, WQE index 0x1e14, len: 64
00000000: 00 00 00 01 d9 ed 80 02 00 00 00 01 d9 ed 90 02
00000010: 00 00 00 01 d9 ed a0 02 00 00 00 01 d9 ed b0 02
00000020: 00 00 00 01 d9 ed c0 02 00 00 00 01 d9 ed d0 02
00000030: 00 00 00 01 d9 ed e0 02 00 00 00 01 d9 ed f0 02
mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2023, qn 0x8f4,
opcode 0xd, syndrome 0x5, vendor syndrome 0xf9
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 01 00 f9 05 01 00 08 f4 de 15 cf d2
Fixes: db05815b36 ("net/mlx5e: Add XSK zero-copy support")
Reported-by: Paul Saab <ps@mu.org>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260513064613.334602-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
v3d_get_cpu_indirect_csd_params() takes a reference to the indirect BO via
drm_gem_object_lookup() and stashes it in cpu_job->indirect_csd.indirect,
but nothing on the CPU job teardown path ever drops that reference.
Drop the extra reference in v3d_cpu_job_free(). The NULL check covers ioctl
errors before the lookup ran and CPU job types other than
V3D_CPU_JOB_TYPE_INDIRECT_CSD, which leave the field zero-initialised.
Cc: stable@vger.kernel.org
Fixes: 18b8413b25 ("drm/v3d: Create a CPU job extension for a indirect CSD job")
Assisted-by: Claude:claude-opus-4.7
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260515-v3d-cpu-job-leaks-v1-2-7f147cbbf935@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
The CPU job ioctl's fail label calls kvfree() on cpu_job's timestamp and
performance query arrays after v3d_job_cleanup(), which drops the job's
last reference and frees cpu_job. Reading cpu_job at that point is a
use-after-free. Also, on the early v3d_job_init() failure path, it is a
NULL dereference, since v3d_job_deallocate() zeroes the local pointer.
In the success path, the arrays are released from the scheduler's
.free_job callback, but on the error path, they are freed manually, as
the job was never pushed to the scheduler. While the success path deals
with this correctly, the fail path doesn't.
On top of that, the manual kvfree() calls only free the array storage;
they don't drm_syncobj_put() the per-query syncobjs that
v3d_timestamp_query_info_free() and v3d_performance_query_info_free()
release on the success path. So the same fail path that triggers the
use-after-free also leaks one syncobj reference per query.
Unify the CPU job teardown into the CPU job's kref destructor, mirroring
v3d_render_job_free(). The scheduler's .free_job slot reverts to the
generic v3d_sched_job_free() and the fail label drops the manual
kvfree() calls, leaving a single teardown path that is reached from both
the scheduler and the ioctl error path. That removes the use-after-free,
the NULL dereference, and the syncobj leak by construction.
Cc: stable@vger.kernel.org
Fixes: 9ba0ff3e08 ("drm/v3d: Create a CPU job extension for the timestamp query job")
Assisted-by: Claude:claude-opus-4.7
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260515-v3d-cpu-job-leaks-v1-1-7f147cbbf935@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
When building for 32-bit platforms, for which 'size_t' is
'unsigned int', there are warnings around using the incorrect format
specifier to print bsize in hid_report_raw_event():
drivers/hid/hid-core.c:2054:29: error: format specifies type 'long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat]
2053 | hid_warn_ratelimited(hid, "Event data for report %d is incorrect (%d vs %ld)\n",
| ~~~
| %zu
2054 | report->id, csize, bsize);
| ^~~~~
drivers/hid/hid-core.c:2076:29: error: format specifies type 'long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat]
2075 | hid_warn_ratelimited(hid, "Event data for report %d was too short (%d vs %ld)\n",
| ~~~
| %zu
2076 | report->id, rsize, bsize);
| ^~~~~
Use the proper 'size_t' format specifier, '%zu', to clear up the
warnings.
Cc: stable@vger.kernel.org
Fixes: 2c85c61d13 ("HID: pass the buffer size to hid_report_raw_event")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Closes: https://lore.kernel.org/20260516020430.110135-1-ojeda@kernel.org/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
css_rstat_updated() is exposed as a BPF kfunc and accepts a
caller-provided cpu argument. The function uses cpu for per-cpu rstat
lookups without checking whether it refers to a valid possible CPU.
A BPF iter/cgroup program with CAP_BPF and CAP_PERFMON can pass an
invalid cpu value. On an unfixed UBSCAN_BOUNDS test kernel, cpu ==
0x7fffffff triggers:
UBSAN: array-index-out-of-bounds in kernel/cgroup/rstat.c:31:9
index 2147483647 is out of range for type 'long unsigned int [64]'
Call Trace:
css_rstat_updated
bpf_iter_run_prog
cgroup_iter_seq_show
bpf_seq_read
Add cpu validation to the BPF-facing css_rstat_updated() kfunc and
move the common implementation to __css_rstat_updated() for in-kernel
callers.
Fixes: a319185be9 ("cgroup: bpf: enable bpf programs to integrate with rstat")
Signed-off-by: Qing Ming <a0yami@mailbox.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
While an srcu_struct structure is in the midst of switching from CPU-0
to all-CPUs state, it can attempt to invoke callbacks for CPUs that
have never been online. Worse yet, it can attempt in invoke callbacks
for CPUs that never will be online, even including imaginary CPUs not in
cpu_possible_mask. This can cause hangs on s390, which is not set up to
deal with workqueue handlers being scheduled on such CPUs. This commit
therefore causes Tree SRCU to refrain from queueing workqueue handlers
on CPUs that have not yet (and might never) come online.
Because callbacks are not invoked on CPUs that have not been
online, it is an error to invoke call_srcu(), synchronize_srcu(), or
synchronize_srcu_expedited() on a CPU that is not yet fully online.
However, it turns out to be less code to redirect the callbacks
from too-early invocations of call_srcu() than to warn about such
invocations. This commit therefore also redirects callbacks queued on
not-yet-fully-online CPUs to the boot CPU.
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Fixes: 61bbcfb505 ("srcu: Push srcu_node allocation to GP when non-preemptible")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Samir <samir@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
The driver falls back to PIO mode if DMA setup fails during probe.
Make sure to clear the DMA channel pointer also if buffer allocation
fails to avoid passing a pointer to the released channel to the DMA
engine (or trying to free the channel a second time on late probe errors
or driver unbind).
This issue was flagged by Sashiko when reviewing a devres allocation
conversion patch.
Fixes: c687c46e9e ("spi: spi-ti-qspi: Use bounce buffer if read buffer is not DMA'ble")
Link: https://sashiko.dev/#/patchset/20260505072909.618363-1-johan%40kernel.org?part=17
Cc: stable@vger.kernel.org # 4.12
Cc: Vignesh R <vigneshr@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260512074809.915084-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver falls back to PIO mode if DMA setup fails during probe.
Make sure to check the dma.enabled flag before trying to release the DMA
channels also on late probe errors to avoid dereferencing an error
pointer (or attempting to release a channel a second time).
This issue was flagged by Sashiko when reviewing a devres allocation
conversion patch.
Fixes: 386119bc7b ("spi: sprd: spi: sprd: Add DMA mode support")
Link: https://sashiko.dev/#/patchset/20260505072909.618363-1-johan%40kernel.org?part=10
Cc: stable@vger.kernel.org # 5.1
Cc: Lanqing Liu <lanqing.liu@unisoc.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260512074733.915029-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When the SAI peripheral is left in a running state by the bootloader,
the driver can experience an interrupt storm during probe that prevents
successful initialization. This occurs because the current code registers
the IRQ handler before resetting the hardware to a known state.
The issue manifests as:
- Continuous interrupts firing immediately after devm_request_irq()
- Driver probe failure or system hang
- Error messages about unhandled interrupts
This is particularly problematic on systems where U-Boot or other
bootloaders enable SAI for boot-time audio feedback or diagnostics
and don't properly disable it before handing control to Linux.
Fix this by reordering the probe sequence:
1. Add fsl_sai_reset_hw() to clear TCSR/RCSR control registers,
which disables the transmitter/receiver and all interrupt sources
2. Move devm_request_irq() to after hardware initialization
This ensures the SAI is in a clean reset state before the interrupt
handler can be invoked, preventing the storm while maintaining proper
error handling and cleanup paths.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20260512065252.75859-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some ACPI-based platforms report incorrect IRQ trigger types (e.g.
IRQF_TRIGGER_HIGH), which can lead to interrupt storms.
Use the historically working rising-edge trigger on ACPI systems to
avoid this regression.
Device Tree-based systems continue to use the firmware-provided
trigger type.
Fixes: 57be33f85e ("nfc: nxp-nci: remove interrupt trigger type")
Signed-off-by: Carl Lee <carl.lee@amd.com>
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Tested-by: Luca Stefani <luca.stefani.ge1@gmail.com>
Link: https://patch.msgid.link/20260516-nfc-nxp-nci-i2c-restore-irq-trigger-fallback-v3-1-37ba4b6e9086@amd.com
Signed-off-by: David Heidelberg <david@ixit.cz>
Commit 1e988c3fe1 ("io_uring: prevent opcode speculation") added
array_index_nospec() to io_init_req(), but applied it only to a local
opcode variable. req->opcode is initialized from sqe->opcode before the
bounds check and remains the raw value.
Keep req->opcode as the canonical opcode in io_init_req(): reject
out-of-range values architecturally, then write the array_index_nospec()
result back to req->opcode before any table lookup. This keeps downstream
users of req->opcode from observing the raw user byte on a mispredicted
path.
No functional change: array_index_nospec() is a no-op for opcodes in
[0, IORING_OP_LAST), and out-of-range opcodes are still rejected at the
bounds check above the assignment.
Fixes: 1e988c3fe1 ("io_uring: prevent opcode speculation")
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260517213010.696135-1-michael.bommarito@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
POWER_SEQUENCING_PCIE_M2 driver handles power supply to the PCIe M.2
connectors and is required on wide variety of ARM64 platforms such as
Qcom Snapdragon X Elite laptops and Mediatek Dojo Chromebooks.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260514065017.11305-1-manivannan.sadhasivam@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Now since the devm_of_qcom_ice_get() API never returns NULL, remove the
NULL check and also simplify the error handling.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com> # UFS
Tested-by: Sumit Garg <sumit.garg@oss.qualcomm.com> # OP-TEE as TZ
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260518-qcom-ice-fix-v7-5-2a595382185b@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Now since the devm_of_qcom_ice_get() API never returns NULL, remove the
NULL check and also simplify the error handling.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Sumit Garg <sumit.garg@oss.qualcomm.com> # OP-TEE as TZ
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260518-qcom-ice-fix-v7-4-2a595382185b@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
devm_of_qcom_ice_get() currently returns NULL if ICE SCM is not available
or "qcom,ice" property is not found in DT. But this confuses the clients
since NULL doesn't convey the reason for failure. So return proper error
codes instead of NULL.
Reported-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Sumit Garg <sumit.garg@oss.qualcomm.com> # OP-TEE as TZ
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260518-qcom-ice-fix-v7-3-2a595382185b@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
By the time the consumer driver calls devm_of_qcom_ice_get(), all the
platform devices for ICE nodes would've been created by
of_platform_default_populate().
So for the absence of any platform device, -ENODEV should not returned, not
-EPROBE_DEFER.
Fixes: 2afbf43a4a ("soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver")
Tested-by: Sumit Garg <sumit.garg@oss.qualcomm.com> # OP-TEE as TZ
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260518-qcom-ice-fix-v7-2-2a595382185b@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The current platform driver design causes probe ordering races with
consumers (UFS, eMMC) due to ICE's dependency on SCM firmware calls. If ICE
probe fails (missing ICE SCM or DT registers), devm_of_qcom_ice_get() loops
with -EPROBE_DEFER, leaving consumers non-functional even when ICE should
be gracefully disabled. devm_of_qcom_ice_get() doesn't know if the ICE
driver probe has failed due to above reasons or it is waiting for the SCM
driver.
Moreover, there is no devlink dependency between ICE and consumer drivers
as 'qcom,ice' is not considered as a DT 'supplier'. So the consumer drivers
have no idea of when the ICE driver is going to probe.
To address these issues, store the error pointer in a global xarray with
ice node phandle as a key during probe in addition to the valid ice pointer
and synchronize both qcom_ice_probe() and of_qcom_ice_get() using a mutex.
If the xarray entry is NULL, then it implies that the driver is not
probed yet, so return -EPROBE_DEFER. If it has any error pointer, return
that error pointer directly. Otherwise, add the devlink as usual and return
the valid pointer to the consumer.
Xarray is used instead of platform drvdata, since driver core frees the
drvdata during probe failure. So it cannot be used to pass the error
pointer to the consumers.
Note that this change only fixes the standalone ICE DT node bindings and
not the ones with 'ice' range embedded in the consumer nodes, where there
is no issue.
Fixes: 2afbf43a4a ("soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver")
Reported-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Tested-by: Sumit Garg <sumit.garg@oss.qualcomm.com> # OP-TEE as TZ
Acked-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Cc: stable@vger.kernel.org # 6.4
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260518-qcom-ice-fix-v7-1-2a595382185b@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
