Switch from running tests sequentially to running in parallel by
default. Change the opt-in '-p' or '--parallel' flag to '-S' or
'--sequential'.
On an 8 core tigerlake an address sanitizer run time changes from:
326.54user 622.73system 6:59.91elapsed 226%CPU
to:
973.02user 583.98system 3:01.17elapsed 859%CPU
So over twice as fast, saving 4 minutes.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240301174711.2646944-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The levenshtein penalty for deleting a character was far higher than
subsituting or inserting a character. Lower the penalty to match that
of inserting a character.
Before:
$ perf recccord
perf: 'recccord' is not a perf-command. See 'perf --help'.
$
After:
$ perf recccord
perf: 'recccord' is not a perf-command. See 'perf --help'.
Did you mean this?
record
$
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240301201306.2680986-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The existing unknown command code looks for perf scripts like
perf-archive.sh and perf-iostat.sh, however, inbuilt commands aren't
suggested. Add the inbuilt commands so they may be suggested too.
Before:
$ perf reccord
perf: 'reccord' is not a perf-command. See 'perf --help'.
$
After:
$ perf reccord
perf: 'reccord' is not a perf-command. See 'perf --help'.
Did you mean this?
record
$
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240301201306.2680986-1-irogers@google.com
[ Added some fixes from Ian to problems I noticed while testing ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the perf test output smoother by timing out the poll of the child
process after 100ms rather than 1s.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240301074639.2260708-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch from dumping err then out, to a single file descriptor for both
of them. This allows the err and output to be correctly interleaved in
verbose output.
Fixes: b482f5f8e0 ("perf tests: Add option to run tests in parallel")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240301074639.2260708-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Per-thread mode requires either system-wide (-a), a pid (-p) or a tid
(-t).
The stat output tests were using system-wide mode but this is racy when
threads are starting and exiting - something that happens a lot when
running the tests in parallel (perf test -p).
Avoid the race conditions by using pid mode with the pid of the parent
process.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240301074639.2260708-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The session has a header in it which contains a perf env with
bpf_progs. The bpf_progs are accessed by the sideband thread and so
the sideband thread must be stopped before the session is deleted, to
avoid a use after free. This error was detected by AddressSanitizer
in the following:
==2054673==ERROR: AddressSanitizer: heap-use-after-free on address 0x61d000161e00 at pc 0x55769289de54 bp 0x7f9df36d4ab0 sp 0x7f9df36d4aa8
READ of size 8 at 0x61d000161e00 thread T1
#0 0x55769289de53 in __perf_env__insert_bpf_prog_info util/env.c:42
#1 0x55769289dbb1 in perf_env__insert_bpf_prog_info util/env.c:29
#2 0x557692bbae29 in perf_env__add_bpf_info util/bpf-event.c:483
#3 0x557692bbb01a in bpf_event__sb_cb util/bpf-event.c:512
#4 0x5576928b75f4 in perf_evlist__poll_thread util/sideband_evlist.c:68
#5 0x7f9df96a63eb in start_thread nptl/pthread_create.c:444
#6 0x7f9df9726a4b in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81
0x61d000161e00 is located 384 bytes inside of 2136-byte region [0x61d000161c80,0x61d0001624d8)
freed by thread T0 here:
#0 0x7f9dfa6d7288 in __interceptor_free libsanitizer/asan/asan_malloc_linux.cpp:52
#1 0x557692978d50 in perf_session__delete util/session.c:319
#2 0x557692673959 in __cmd_record tools/perf/builtin-record.c:2884
#3 0x55769267a9f0 in cmd_record tools/perf/builtin-record.c:4259
#4 0x55769286710c in run_builtin tools/perf/perf.c:349
#5 0x557692867678 in handle_internal_command tools/perf/perf.c:402
#6 0x557692867a40 in run_argv tools/perf/perf.c:446
#7 0x557692867fae in main tools/perf/perf.c:562
#8 0x7f9df96456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
Fixes: 657ee55319 ("perf evlist: Introduce side band thread")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240301074639.2260708-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf_pmu__name_from_config that does a reverse lookup from a
config number to an alias name. The lookup is expensive as the config
is computed for every alias by filling in a perf_event_attr, but this
is only done when verbose output is enabled. The lookup also only
considers config, and not config1, config2 or config3.
An example of the output:
$ perf stat -vv -e data_read true
...
perf_event_attr:
type 24 (uncore_imc_free_running_0)
size 136
config 0x20ff (data_read)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
...
Committer notes:
Fix the python binding build by adding dummies for not strictly
needed perf_pmu__name_from_config() and perf_pmus__find_by_type().
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20240308001915.4060155-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When dumping a perf_event_attr, use pmus to find the PMU and its name
by the type number. This allows dynamically added PMUs to be described.
Before:
$ perf stat -vv -e data_read true
...
perf_event_attr:
type 24
size 136
config 0x20ff
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
...
After:
$ perf stat -vv -e data_read true
...
perf_event_attr:
type 24 (uncore_imc_free_running_0)
size 136
config 0x20ff
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
...
However, it also means that when we have a PMU name we prefer it to a
hard coded name:
Before:
$ perf stat -vv -e faults true
...
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0x2 (PERF_COUNT_SW_PAGE_FAULTS)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
...
After:
$ perf stat -vv -e faults true
...
perf_event_attr:
type 1 (software)
size 136
config 0x2 (PERF_COUNT_SW_PAGE_FAULTS)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
...
It feels more consistent to do this, rather than only prefer a PMU
name when a hard coded name isn't available.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20240308001915.4060155-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A raw event encoding may be a block with terms separated by commas. If
wrapping such a string it would be useful to break at the commas, so
add this ability to wordwrap.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20240308001915.4060155-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
"default_core" is used by jevents.py for json events' PMU name when
none is specified. On x86 the "default_core" is typically the PMU
"cpu". When creating an alias see if the event's PMU name is
"default_core" in which case don't record it. This means in places
like "perf list" the PMU's name will be used in its place.
Before:
$ perf list --details
...
cache:
l1d.replacement
[Counts the number of cache lines replaced in L1 data cache]
default_core/event=0x51,period=0x186a3,umask=0x1/
...
After:
$ perf list --details
...
cache:
l1d.replacement
[Counts the number of cache lines replaced in L1 data cache. Unit: cpu]
cpu/event=0x51,period=0x186a3,umask=0x1/
...
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20240308001915.4060155-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tracepoint id holds the config value and is probed in determining
what an event is. Add reading of the id so that we can display the
event encoding as:
$ perf list --details
...
alarmtimer:alarmtimer_cancel [Tracepoint event]
tracepoint/config=0x18c/
...
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20240308001915.4060155-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was using the first variation on producing a string representation
for a binary flag, one that used the copy of uapi/linux/sched.h with
preprocessor tricks that had to be updated everytime a new flag was
introduced.
Use the more recent scrape script + strarray + strarray__scnprintf_flags() combo.
$ tools/perf/trace/beauty/clone.sh | head -5
static const char *clone_flags[] = {
[ilog2(0x00000100) + 1] = "VM",
[ilog2(0x00000200) + 1] = "FS",
[ilog2(0x00000400) + 1] = "FILES",
[ilog2(0x00000800) + 1] = "SIGHAND",
$
Now we can move uapi/linux/sched.h from tools/include/, that is used for
building perf to the scrape only directory tools/perf/trace/beauty/include.
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZfnULIn3XKDq0bpc@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In some cases, it was able to find a type or location info (for per-cpu
variable) but cannot match because of invalid offset or missing global
information. In those cases, it's meaningless to go to the outer scope
and retry because there will be no additional information.
Let's change the return type of find_matching_type() and bail out if it
returns -1 for the cases.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-24-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
They are often searched by many different places. Let's add a cache
for them to reduce the duplicate DWARF access.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-23-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the stack protector is enabled, compiler would generate code to
check stack overflow with a special value called 'stack carary' at
runtime. On x86_64, GCC hard-codes the stack canary as %gs:40.
While there's a definition of fixed_percpu_data in asm/processor.h,
it seems that the header is not included everywhere and many places
it cannot find the type info. As it's in the well-known location (at
%gs:40), let's add a pseudo stack canary type to handle it specially.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-22-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are different patterns for percpu variable access using a constant
value added to the base.
2aeb: mov -0x7da0f7e0(,%rax,8),%r14 # r14 = __per_cpu_offset[cpu]
2af3: mov $0x34740,%rax # rax = address of runqueues
* 2afa: add %rax,%r14 # r14 = &per_cpu(runqueues, cpu)
2bfd: cmpl $0x0,0x10(%r14) # cpu_rq(cpu)->has_blocked_load
2b03: je 0x2b36
At the first instruction, r14 has the __per_cpu_offset. And then rax
has an immediate value and then added to r14 to calculate the address of
a per-cpu variable. So it needs to track the immediate values and ADD
instructions.
Similar but a little different case is to use "this_cpu_off" instead of
"__per_cpu_offset" for the current CPU. This time the variable address
comes with PC-rel addressing.
89: mov $0x34740,%rax # rax = address of runqueues
* 90: add %gs:0x7f015f60(%rip),%rax # 19a78 <this_cpu_off>
98: incl 0xd8c(%rax) # cpu_rq(cpu)->sched_count
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-21-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is to support per-cpu variable access often without a matching
DWARF entry. For some reason, I cannot find debug info of per-cpu
variables sometimes. They have more complex pattern to calculate the
address of per-cpu variables like below.
2b7d: mov -0x1e0(%rbp),%rax ; rax = cpu
2b84: mov -0x7da0f7e0(,%rax,8),%rcx ; rcx = __per_cpu_offset[cpu]
* 2b8c: mov 0x34870(%rcx),%rax ; *(__per_cpu_offset[cpu] + 0x34870)
Let's assume the rax register has a number for a CPU at 2b7d. The next
instruction is to get the per-cpu offset' for that cpu. The offset
-0x7da0f7e0 is 0xffffffff825f0820 in u64 which is the address of the
'__per_cpu_offset' array in my system. So it'd get the actual offset
of that CPU's per-cpu region and save it to the rcx register.
Then, at 2b8c, accesses using rcx can be handled same as the global
variable access. To handle this case, it should check if the offset
of the instruction matches to the address of '__per_cpu_offset'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-20-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Like global variables, this per-cpu variables should be tracked
correctly. Factor our get_global_var_type() to handle both global
and per-cpu (for this cpu) variables in the same manner.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-19-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On x86, the kernel gets the current task using the current macro like
below:
#define current get_current()
static __always_inline struct task_struct *get_current(void)
{
return this_cpu_read_stable(pcpu_hot.current_task);
}
So it returns the current_task field of struct pcpu_hot which is the
first member. On my build, it's located at 0x32940.
$ nm vmlinux | grep pcpu_hot
0000000000032940 D pcpu_hot
And the current macro generates the instructions like below:
mov %gs:0x32940, %rcx
So the %gs segment register points to the beginning of the per-cpu
region of this cpu and it points the variable with a constant.
Let's update the instruction location info to have a segment register
and handle %gs in kernel to look up a global variable. Pretend it as
a global variable by changing the register number to DWARF_REG_PC.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-18-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a segment field in the struct annotated_insn_loc and save it for the
segment based addressing like %gs:0x28. For simplicity it now handles
%gs register only.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-17-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As instruction tracking updates the type state for each register, check
the final type info for the target register at the given instruction.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-16-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If it failed to find a variable for the location directly, it might be
due to a missing variable in the source code. For example, accessing
pointer variables in a chain can result in the case like below:
struct foo *foo = ...;
int i = foo->bar->baz;
The DWARF debug information is created for each variable so it'd have
one for 'foo'. But there's no variable for 'foo->bar' and then it
cannot know the type of 'bar' and 'baz'.
The above source code can be compiled to the follow x86 instructions:
mov 0x8(%rax), %rcx
mov 0x4(%rcx), %rdx <=== PMU sample
mov %rdx, -4(%rbp)
Let's say 'foo' is located in the %rax and it has a pointer to struct
foo. But perf sample is captured in the second instruction and there
is no variable or type info for the %rcx.
It'd be great if compiler could generate debug info for %rcx, but we
should handle it on our side. So this patch implements the logic to
iterate instructions and update the type table for each location.
As it already collected a list of scopes including the target
instruction, we can use it to construct the type table smartly.
+---------------- scope[0] subprogram
|
| +-------------- scope[1] lexical_block
| |
| | +------------ scope[2] inlined_subroutine
| | |
| | | +---------- scope[3] inlined_subroutine
| | | |
| | | | +-------- scope[4] lexical_block
| | | | |
| | | | | *** target instruction
...
Image the target instruction has 5 scopes, each scope will have its own
variables and parameters. Then it can start with the innermost scope
(4). So it'd search the shortest path from the start of scope[4] to
the target address and build a list of basic blocks. Then it iterates
the basic blocks with the variables in the scope and update the table.
If it finds a type at the target instruction, then returns it.
Otherwise, it moves to the upper scope[3]. Now it'd search the shortest
path from the start of scope[3] to the start of scope[4]. Then connect
it to the existing basic block list. Then it'd iterate the blocks with
variables for both scopes. It can repeat this until it finds a type at
the target instruction or reaches to the top scope[0].
As the basic blocks contain the shortest path, it won't worry about
branches and can update the table simply.
The final check will be done by find_matching_type() in the next patch.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-15-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When updating instruction states, the call instruction should play a
role since it changes the register states. For simplicity, mark some
registers as caller-saved registers (should be arch-dependent), and
invalidate them all after a function call.
If the function returns something, the designated register (ret_reg)
will have the type info.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-14-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When updating the instruction states, it also needs to handle global
variable accesses. Same as it does for PC-relative addressing, it can
look up the type by address (if it's defined in the same file), or by
name after finding the symbol by address (for declarations).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-13-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Accessing global variable is common when it tracks execution later.
Factor out the common code into a function for later use.
It adds thread and cpumode to struct data_loc_info to find (global)
symbols if needed. Also remove var_name as it's retrieved in the
helper function.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-12-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The update_insn_state() function is to update the type state table after
processing each instruction. For now, it handles MOV (on x86) insn
to transfer type info from the source location to the target.
The location can be a register or a stack slot. Check carefully when
memory reference happens and fetch the type correctly. It basically
ignores write to a memory since it doesn't change the type info. One
exception is writes to (new) stack slots for register spilling.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-11-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it collected basic block and variable information in each scope, it
now can build a state table to find matching variable at the location.
The struct type_state is to keep the type info saved in each register
and stack slot. The update_var_state() updates the table when it finds
variables in the current address. It expects die_collect_vars() filled
a list of variables with type info and starting address.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-10-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new debug option "type-profile" to enable the detailed info during
the type analysis especially for instruction tracking. You can use this
before the command name like 'report' or 'annotate'.
$ perf --debug type-profile annotate --data-type
Committer testing:
First get some memory events:
$ perf mem record ls
Then, without data-type profiling debug:
$ perf annotate --data-type | head
Annotate type: 'struct rtld_global' in /usr/lib64/ld-linux-x86-64.so.2 (1 samples):
============================================================================
samples offset size field
1 0 4336 struct rtld_global {
0 0 0 struct link_namespaces* _dl_ns;
0 2560 8 size_t _dl_nns;
0 2568 40 __rtld_lock_recursive_t _dl_load_lock {
0 2568 40 pthread_mutex_t mutex {
0 2568 40 struct __pthread_mutex_s __data {
0 2568 4 int __lock;
$
And with only data-type profiling:
$ perf --debug type-profile annotate --data-type | head
-----------------------------------------------------------
find_data_type_die [1e67] for reg13873052 (PC) offset=0x150e2 in dl_main
CU die offset: 0x29cd3
found PC-rel by addr=0x34020 offset=0x20
-----------------------------------------------------------
find_data_type_die [2e] for reg12 offset=0 in __GI___readdir64
CU die offset: 0x137a45
frame base: cfa=1 fbreg=-1
found "__futex" in scope=2/2 (die: 0x137ad5) 0(reg12) type=int (die:2a)
-----------------------------------------------------------
find_data_type_die [52] for reg5 offset=0 in __memmove_avx_unaligned_erms
CU die offset: 0x1124ed
no variable found
Annotate type: 'struct rtld_global' in /usr/lib64/ld-linux-x86-64.so.2 (1 samples):
============================================================================
samples offset size field
1 0 4336 struct rtld_global {
0 0 0 struct link_namespaces* _dl_ns;
0 2560 8 size_t _dl_nns;
0 2568 40 __rtld_lock_recursive_t _dl_load_lock {
0 2568 40 pthread_mutex_t mutex {
0 2568 40 struct __pthread_mutex_s __data {
0 2568 4 int __lock;
$
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The annotate_get_basic_blocks() is to find a list of basic blocks from
the source instruction to the destination instruction in a function.
It'll be used to find variables in a scope. Use BFS (Breadth First
Search) to find a shortest path to carry the variable/register state
minimally.
Also change find_disasm_line() to be used in annotate_get_basic_blocks()
and add 'allow_update' argument to control if it can update the IP.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The find_data_type() needs many information to describe the location of
the data. Add the new 'struct data_loc_info' to pass those information at
once.
No functional changes intended.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes we want to convert an address in objdump output to
map-relative address to match with a sample data. Let's add
map__objdump_2rip() for that.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The die_find_func_rettype() is to find a debug entry for the given
function name and sets the type information of the return value. By
convention, it'd return the pointer to the type die (should be the
same as the given mem_die argument) if found, or NULL otherwise.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We want to track type states as instructions are executed. Each
instruction can access compound types like struct or union and load/
store its members to a different location.
The die_deref_ptr_type() is to find a type of memory access with a
pointer variable. If it points to a compound type like struct, the
target memory is a member in the struct. The access will happen with an
offset indicating which member it refers. Let's follow the DWARF info
to figure out the type of the pointer target.
For example, say we have the following code.
struct foo {
int a;
int b;
};
struct foo *p = malloc(sizeof(*p));
p->b = 0;
The last pointer access should produce x86 asm like below:
mov 0x0, 4(%rbx)
And we know %rbx register has a pointer to struct foo. Then offset 4
should return the debug info of member 'b'.
Also variables of compound types can be accessed directly without a
pointer. The die_get_member_type() is to handle a such case.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-4-namhyung@kernel.org
[ Check if die_get_real_type() returned NULL ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The die_collect_vars() is to find all variable information in the scope
including function parameters. The struct die_var_type is to save the
type of the variable with the location (reg and offset) as well as where
it's defined in the code (addr).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240319055115.4063940-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rather than manually iterating the CPU map, use
perf_cpu_map__for_each_cpu(). When possible tidy local variables.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/20240202234057.2085863-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use libperf's perf_cpu_map__equal() that performs the same function.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/20240202234057.2085863-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In both cases the CPU map is known owned by either the caller or a
PMU.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/20240202234057.2085863-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Most uses of what was perf_cpu_map__empty but is now
perf_cpu_map__has_any_cpu_or_is_empty want to do something with the
CPU map if it contains CPUs. Replace uses of
perf_cpu_map__has_any_cpu_or_is_empty with other helpers so that CPUs
within the map can be handled.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/20240202234057.2085863-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch perf_cpu_map__has_any_cpu_or_is_empty() to
perf_cpu_map__is_any_cpu_or_is_empty() as a CPU map may contain CPUs as
well as the dummy event and perf_cpu_map__is_any_cpu_or_is_empty() is a
more correct alternative.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/20240202234057.2085863-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rather than iterate all CPUs and see if they are in CPU maps, directly
iterate the CPU map. Similarly make use of the intersect function
taking care for when "any" CPU is specified. Switch
perf_cpu_map__has_any_cpu_or_is_empty() to more appropriate
alternatives.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/20240202234057.2085863-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It seems that a previous modification to sysreg-defs, which corrected
emitting the header to the specified output directory, exposed missing
subdir, prefix variables.
This breaks out of tree builds of perf as the file is now built into the
output directory, but still tries to descend into output directory as a
subdir.
Fixes: a29ee6aea7 ("perf build: Ensure sysreg-defs Makefile respects output dir")
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Ethan Adams <j.ethan.adams@gmail.com>
Tested-by: Tycho Andersen <tycho@tycho.pizza>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240314222012.47193-1-j.ethan.adams@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the --itrace option is used more than once, the options are
combined, but "i" and "y" (sub-)options can be corrupted because
itrace_do_parse_synth_opts() incorrectly overwrites the period type and
period with default values.
For example, with:
--itrace=i0ns --itrace=e
The processing of "--itrace=e", resets the "i" period from 0 nanoseconds
to the default 100 microseconds.
Fix by performing the default setting of period type and period only if
"i" or "y" are present in the currently processed --itrace value.
Fixes: f6986c95af ("perf session: Add instruction tracing options")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240315071334.3478-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The trace could be misleading if trace errors are not taken into
account, so display them also by adding the itrace "e" option.
Note --call-trace and --call-ret-trace already add the itrace "e"
option.
Fixes: b585ebdb59 ("perf script: Add --insn-trace for instruction decoding")
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240315071334.3478-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The question of exactly when KPTI needs to be disabled comes up a lot
because it doesn't always need to be done. Add the relevant kernel
function and some examples that describe the behavior.
Also describe the interrupt requirement and that no error message will
be printed if this isn't met.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240312132508.423320-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These were used to build perf to provide defines not available in older
distros, but this was back in 2017, nowadays most the distros that are
supported and I have build containers for work using just the system
headers, so ditch them.
For the few that don't have STATX_MNT_ID{_UNIQUE}, or STATX_MNT_DIOALIGN
add them conditionally.
Some of these older distros may not have things that are used in 'perf
trace', but then they also don't have libtraceevent packages, so don't
build 'perf trace'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20240315204835.748716-6-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These were used to build perf to provide defines not available in older
distros, but this was back in 2017, nowadays all the distros that are
supported and I have build containers for work using just the system
headers, so ditch them.
Some of these older distros may not have things that are used in 'perf
trace', but then they also don't have libtraceevent packages, so don't
build 'perf trace'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20240315204835.748716-5-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Builds ok all the way back to these older distros:
1 almalinux:8 : Ok gcc (GCC) 8.5.0 20210514 (Red Hat 8.5.0-20) , clang version 16.0.6 (Red Hat 16.0.6-2.module_el8.9.0+3621+df7f7146) flex 2.6.1
3 alpine:3.15 : Ok gcc (Alpine 10.3.1_git20211027) 10.3.1 20211027 , Alpine clang version 12.0.1 flex 2.6.4
15 debian:10 : Ok gcc (Debian 8.3.0-6) 8.3.0 , Debian clang version 11.0.1-2~deb10u1 flex 2.6.4
32 opensuse:15.4 : Ok gcc (SUSE Linux) 7.5.0 , clang version 15.0.7 flex 2.6.4
23 fedora:35 : Ok gcc (GCC) 11.3.1 20220421 (Red Hat 11.3.1-3) , clang version 13.0.1 (Fedora 13.0.1-1.fc35) flex 2.6.4
38 ubuntu:18.04 : Ok gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0 flex 2.6.4
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20240315204835.748716-4-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is used only to generate string tables, not to build perf, so move it
to the tools/perf/trace/beauty/{include,arch}/ hierarchies, that is used
just for scraping.
This is a something that should've have happened, as happened with the
linux/socket.h scrapper, do it now as Ian suggested while doing an
audit/refactor session in the headers used by perf.
No other tools/ living code uses it, just <linux/usbdevice_fs.h> coming
from either 'make install_headers' or from the system /usr/include/
directory.
Suggested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20240315204835.748716-3-acme@kernel.org
Link: https://lore.kernel.org/lkml/CAP-5=fWZVrpRufO4w-S4EcSi9STXcTAN2ERLwTSN7yrSSA-otQ@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the system one, nothing used in that file isn't available in the
supported, active distros.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
To: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/lkml/20240315204835.748716-3-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is used only to generate string tables, not to build perf, so move it
to the tools/perf/trace/beauty/include/ hierarchy, that is used just for
scraping.
This is a something that should've have happened, as happened with the
linux/socket.h scrapper, do it now as Ian suggested while doing an
audit/refactor session in the headers used by perf.
No other tools/ living code uses it.
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/CAP-5=fWZVrpRufO4w-S4EcSi9STXcTAN2ERLwTSN7yrSSA-otQ@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is used only to generate string tables, not to build perf, so move it
to the tools/perf/trace/beauty/include/ hierarchy, that is used just for
scraping.
This is a something that should've have happened, as happened with the
linux/socket.h scrapper, do it now as Ian suggested while doing an
audit/refactor session in the headers used by perf.
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/CAP-5=fWZVrpRufO4w-S4EcSi9STXcTAN2ERLwTSN7yrSSA-otQ@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is mostly used only to generate string tables, not to build perf, so
move it to the tools/perf/trace/beauty/include/ hierarchy, that is used
just for scraping.
This is a something that should've have happened, as happened with the
linux/socket.h scrapper, do it now as Ian suggested while doing an
audit/refactor session in the headers used by perf.
No other tools/ living code uses it, just <linux/usbdevice_fs.h> coming
from either 'make install_headers' or from the system /usr/include/
directory.
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/CAP-5=fWZVrpRufO4w-S4EcSi9STXcTAN2ERLwTSN7yrSSA-otQ@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is mostly used only to generate string tables, not to build perf, so
move it to the tools/perf/trace/beauty/include/ hierarchy, that is used
just for scraping.
This is a something that should've have happened, as happened with the
linux/socket.h scrapper, do it now as Ian suggested while doing an
audit/refactor session in the headers used by perf.
No other tools/ living code uses it, just <linux/mount.h> coming from
either 'make install_headers' or from the system /usr/include/
directory.
Suggested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/CAP-5=fWZVrpRufO4w-S4EcSi9STXcTAN2ERLwTSN7yrSSA-otQ@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tools/include/uapi/linux/mount.h file is mostly used for scrapping
defines into id->string tables, this is the only place were it is being
directly used, stop doing so.
Define MOUNT_ATTR_RELATIME and MOUNT_ATTR__ATIME if not available in the
system's headers.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is mostly used only to generate string tables, not to build perf, so
move it to the tools/perf/trace/beauty/include/ hierarchy, that is used
just for scraping.
The only case where it was being used to build was in
tools/perf/trace/beauty/sync_file_range.c, because some older systems
doesn't have the SYNC_FILE_RANGE_WRITE_AND_WAIT define, just use the
system's linux/fs.h header instead, defining it if not available.
This is a something that should've have happened, as happened with the
linux/socket.h scrapper, do it now as Ian suggested while doing an
audit/refactor session in the headers used by perf.
No other tools/ living code uses it, just <linux/fs.h> coming from
either 'make install_headers' or from the system /usr/include/
directory.
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/CAP-5=fWZVrpRufO4w-S4EcSi9STXcTAN2ERLwTSN7yrSSA-otQ@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Several such tables were depending on uapi/linux/fs.h, cut and paste
error when they were introduced, fix it.
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/Ze9vjxv42PN_QGZv@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The only user of these was io_uring, and it's not using them anymore.
Make them static and remove them from the socket header file.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/1b6089d3-c1cf-464a-abd3-b0f0b6bb2523@kernel.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the Andes AX45 JSON files that allows specifying symbolic event
names for the raw PMU events.
Signed-off-by: Locus Wei-Han Chen <locus84@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Charles Ci-Jyun Wu <dminus@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20240222083946.3977135-11-peterlin@andestech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
It's not used anymore and the code is coverted to use a hash map. Now
sym_hist has a static size, so no need to have sizeof_sym_hist in the
struct annotated_source.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240304230815.1440583-4-namhyung@kernel.org
Use annotated_source.samples hashmap instead of addr array in the
struct sym_hist.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240304230815.1440583-3-namhyung@kernel.org
Now symbol histogram uses an array to save per-offset sample counts.
But it wastes a lot of memory if the symbol has a few samples only.
Add a hashmap to save values only for actual samples.
For now, it has duplicate histogram (one in the existing array and
another in the new hash map). Once it can convert to use the hash
in all places, we can get rid of the array later.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240304230815.1440583-2-namhyung@kernel.org
The threads data structure is an array of hashmaps, previously
rbtrees. The two levels allows for a fixed outer array where access is
guarded by rw_semaphores. Commit 91e467bc56 ("perf machine: Use
hashtable for machine threads") sized the outer table at 256 entries
to avoid future scalability problems, however, this means the threads
struct is sized at 30,720 bytes. As the hashmaps allow O(1) access for
the common find/insert/remove operations, lower the number of entries
to 8. This reduces the size overhead to 960 bytes.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-8-irogers@google.com
The rbtree provides a sorting on entries but this is unused. Switch to
using hashmap for O(1) rather than O(log n) find/insert/remove
complexity.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-7-irogers@google.com
Move threads out of machine and into its own file.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-6-irogers@google.com
Move thread_rb_node into the machine.c file. This hides the
implementation of threads from the rest of the code allowing for it to
be refactored.
Locking discipline is tightened up in this change. As the lock is now
encapsulated in threads, the findnew function requires holding it (as
it already did in machine). Rather than do conditionals with locks
based on whether the thread should be created (which could potentially
be error prone with a read lock match with a write unlock), have a
separate threads__find that won't create the thread and only holds the
read lock. This effectively duplicates the findnew logic, with the
existing findnew logic only operating under a write lock assuming
creation is necessary as a previous find failed. The creation may
still fail with the write lock due to another thread. The duplication
is removed in a later next patch that delegates the implementation to
hashtable.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-5-irogers@google.com
Avoid exposing the threads data structure by switching to the callback
machine__for_each_thread approach. machine__fprintf is only used in
tests and verbose >3 output so don't turn to list and sort. Add
machine__threads_nr to be refactored later.
Note, all existing *_fprintf routines ignore fprintf errors.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-4-irogers@google.com
Commit 91e467bc56 ("perf machine: Use hashtable for machine
threads") made the iteration of thread tids unordered. The perf trace
--summary output sorts and prints each hash bucket, rather than all
threads globally. Change this behavior by turn all threads into a
list, sort the list by number of trace events then by tids, finally
print the list. This also allows the rbtree in threads to be not
accessed outside of machine.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-3-irogers@google.com
Commit 91e467bc56 ("perf machine: Use hashtable for machine
threads") made the iteration of thread tids unordered. The perf report
--tasks output now shows child threads in an order determined by the
hashing. For example, in this snippet tid 3 appears after tid 256 even
though they have the same ppid 2:
```
$ perf report --tasks
% pid tid ppid comm
0 0 -1 |swapper
2 2 0 | kthreadd
256 256 2 | kworker/12:1H-k
693761 693761 2 | kworker/10:1-mm
13017621301762 2 | kworker/1:1-mm_
1302530 1302530 2 | kworker/u32:0-k
3 3 2 | rcu_gp
...
```
The output is easier to read if threads appear numerically
increasing. To allow for this, read all threads into a list then sort
with a comparator that orders by the child task's of the first common
parent. The list creation and deletion are created as utilities on
machine. The indentation is possible by counting the number of
parents a child has.
With this change the output for the same data file is now like:
```
$ perf report --tasks
% pid tid ppid comm
0 0 -1 |swapper
1 1 0 | systemd
823 823 1 | systemd-journal
853 853 1 | systemd-udevd
3230 3230 1 | systemd-timesyn
3236 3236 1 | auditd
3239 3239 3236 | audisp-syslog
3321 3321 1 | accounts-daemon
...
```
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301053646.1449657-2-irogers@google.com
L3PMCx0AC and L3PMCx0AD, used in l3_xi_sampled_latency* events, have a
quirk that requires them to be programmed with SliceId set to 0x3.
Without this, the events do not count at all and affects dependent
metrics such as l3_read_miss_latency.
If ThreadMask is not specified, the amd-uncore driver internally sets
ThreadMask to 0x3, EnAllCores to 0x1 and EnAllSlices to 0x1 but does
not set SliceId. Since SliceId must also be set to 0x3 in this case,
specify all the other fields explicitly.
E.g.
$ sudo perf stat -e l3_xi_sampled_latency.all,l3_xi_sampled_latency_requests.all -a sleep 1
Before:
Performance counter stats for 'system wide':
0 l3_xi_sampled_latency.all
0 l3_xi_sampled_latency_requests.all
1.005155399 seconds time elapsed
After:
Performance counter stats for 'system wide':
921,446 l3_xi_sampled_latency.all
54,210 l3_xi_sampled_latency_requests.all
1.005664472 seconds time elapsed
Fixes: 5b2ca349c3 ("perf vendor events amd: Add Zen 4 uncore events")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: ananth.narayan@amd.com
Cc: ravi.bangoria@amd.com
Cc: eranian@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301084431.646221-1-sandipan.das@amd.com
This is useful for scripts that work with Perf and ETM trace. Rather
than them trying to parse Perf's error output at runtime to see if it
was linked or not.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: al.grant@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240301133829.346286-1-james.clark@arm.com
The find will get the map, ensure puts are done on all paths.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240229062048.558799-1-irogers@google.com
Currently it accounts the contention using delta between timestamps in
lock:contention_begin and lock:contention_end tracepoints. But it means
the lock should see the both events during the monitoring period.
Actually there are 4 cases that happen with the monitoring:
monitoring period
/ \
| |
1: B------+-----------------------+--------E
2: B----+-------------E |
3: | B-----------+----E
4: | B-------------E |
| |
t0 t1
where B and E mean contention BEGIN and END, respectively. So it only
accounts the case 4 for now. It seems there's no way to handle the case
1. The case 2 might be handled if it saved the timestamp (t0), but it
lacks the information from the B notably the flags which shows the lock
types. Also it could be a nested lock which it currently ignores. So
I think we should ignore the case 2.
However we can handle the case 3 if we save the timestamp (t1) at the
end of the period. And then it can iterate the map entries in the
userspace and update the lock stat accordinly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviwed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20240228053335.312776-1-namhyung@kernel.org
A metric may have no events, for example, the transaction metrics on
x86 are dependent on there being TSX events. Fix a segv where an evsel
of NULL is dereferenced for a metric leader value.
Fixes: a59fb796a3 ("perf metrics: Compute unmerged uncore metrics individually")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240224011420.3066322-2-irogers@google.com
The metric match function fails for cases like looking for "metric" in
the string "all;foo_metric;metric" as the "metric" in "foo_metric"
matches but isn't preceeded by a ';'. Fix this by matching the first
list item and recursively matching on failure the next item after a
semicolon.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240224011420.3066322-1-irogers@google.com
Just to make things clearer, return TEST_FAIL (-1) instead of an open
coded -1.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/ZdepeMsjagbf1ufD@x1
Arm64 doesn't have Model in /proc/cpuinfo and, thus, cpu_desc doesn't get
assigned.
Running
$ perf data convert --to-json perf.data.json
ends up calling output_json_string() with NULL pointer, which causes a
segmentation fault.
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Evgeny Pistun <kotborealis@awooo.ru>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240223220458.15282-1-ilkka@os.amperecomputing.com
When building BPF skels perf will, by default, install a minimalistic
vmlinux.h file with the types needed by the BPF skels in
tools/perf/util/bpf_skel/ in its build directory.
When 29d16de26d ("perf augmented_raw_syscalls.bpf: Move 'struct
timespec64' to vmlinux.h") was added, a type used in the augmented_raw_syscalls
BPF skel, 'struct timespec64' was not found when building from a pre-existing
build directory, because the vmlinux.h there didn't contain that type,
ending up with this error, spotted in linux-next:
CLANG /tmp/build/perf-tools-next/util/bpf_skel/.tmp/augmented_raw_syscalls.bpf.o
util/bpf_skel/augmented_raw_syscalls.bpf.c:329:15: error: invalid application of 'sizeof' to an incomplete type 'struct timespec64'
329 | __u32 size = sizeof(struct timespec64);
| ^ ~~~~~~~~~~~~~~~~~~~
util/bpf_skel/augmented_raw_syscalls.bpf.c:329:29: note: forward declaration of 'struct timespec64'
329 | __u32 size = sizeof(struct timespec64);
| ^
util/bpf_skel/augmented_raw_syscalls.bpf.c:350:15: error: invalid application of 'sizeof' to an incomplete type 'struct timespec64'
350 | __u32 size = sizeof(struct timespec64);
| ^ ~~~~~~~~~~~~~~~~~~~
util/bpf_skel/augmented_raw_syscalls.bpf.c:350:29: note: forward declaration of 'struct timespec64'
350 | __u32 size = sizeof(struct timespec64);
| ^
2 errors generated.
make[2]: *** [Makefile.perf:1158: /tmp/build/perf-tools-next/util/bpf_skel/.tmp/augmented_raw_syscalls.bpf.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [Makefile.perf:261: sub-make] Error 2
make: *** [Makefile:113: install-bin] Error 2
make: Leaving directory '/home/acme/git/perf-tools-next/tools/perf'
So add a Makefile dependency (Namhyung's suggestion) to make sure that
the new tools/perf/util/bpf_skel/vmlinux/vmlinux.h minimal vmlinux is
updated in the build directory, providing the moved 'struct timespec64'
type.
Fixes: 29d16de26d ("perf augmented_raw_syscalls.bpf: Move 'struct timespec64' to vmlinux.h")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Ian Rogers <irogers@google.com>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/ZdoPrWg-qYFpBJbz@x1
In Makefiles, $(error ), $(warning ), and $(info ) expand to the empty
string, as explained in the GNU Make manual [1]:
"The result of the expansion of this function is the empty string."
Therefore, they are no-op except for logging purposes.
$(shell ...) expands to the output of the command. It expands to the
empty string when the command does not print anything to stdout.
Hence, $(shell mkdir ...) is no-op except for creating the directory.
Remove meaningless assignments.
[1]: https://www.gnu.org/software/make/manual/make.html#Make-Control-Functions
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20240221134201.2656908-1-masahiroy@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kbuild@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Currently the perf tool doesn't detect support for extended event types
on Apple M1/M2 systems, and will not auto-expand plain PERF_EVENT_TYPE
hardware events into per-PMU events. This is due to the detection of
extended event types not handling mandatory filters required by the
M1/M2 PMU driver.
PMU drivers and the core perf_events code can require that
perf_event_attr::exclude_* filters are configured in a specific way and
may reject certain configurations of filters, for example:
(a) Many PMUs lack support for any event filtering, and require all
perf_event_attr::exclude_* bits to be clear. This includes Alpha's
CPU PMU, and ARM CPU PMUs prior to the introduction of PMUv2 in
ARMv7,
(b) When /proc/sys/kernel/perf_event_paranoid >= 2, the perf core
requires that perf_event_attr::exclude_kernel is set.
(c) The Apple M1/M2 PMU requires that perf_event_attr::exclude_guest is
set as the hardware PMU does not count while a guest is running (but
might be extended in future to do so).
In is_event_supported(), we try to account for cases (a) and (b), first
attempting to open an event without any filters, and if this fails,
retrying with perf_event_attr::exclude_kernel set. We do not account for
case (c), or any other filters that drivers could theoretically require
to be set.
Thus is_event_supported() will fail to detect support for any events
targeting an Apple M1/M2 PMU, even where events would be supported with
perf_event_attr:::exclude_guest set.
Since commit:
82fe2e45cd ("perf pmus: Check if we can encode the PMU number in perf_event_attr.type")
... we use is_event_supported() to detect support for extended types,
with the PMU ID encoded into the perf_event_attr::type. As above, on an
Apple M1/M2 system this will always fail to detect that the event is
supported, and consequently we fail to detect support for extended types
even when these are supported, as they have been since commit:
5c81672865 ("arm_pmu: Add PERF_PMU_CAP_EXTENDED_HW_TYPE capability")
Due to this, the perf tool will not automatically expand plain
PERF_TYPE_HARDWARE events into per-PMU events, even when all the
necessary kernel support is present.
This patch updates is_event_supported() to additionally try opening
events with perf_event_attr::exclude_guest set, allowing support for
events to be detected on Apple M1/M2 systems. I believe that this is
sufficient for all contemporary CPU PMU drivers, though in future it may
be necessary to check for other combinations of filter bits.
I've deliberately changed the check to not expect a specific error code
for missing filters, as today ;the kernel may return a number of
different error codes for missing filters (e.g. -EACCESS, -EINVAL, or
-EOPNOTSUPP) depending on why and where the filter configuration is
rejected, and retrying for any error is more robust.
Note that this does not remove the need for commit:
a24d9d9dc0 ("perf parse-events: Make legacy events lower priority than sysfs/JSON")
... which is still necessary so that named-pmu/event/ events work on
kernels without extended type support, even if the event name happens to
be the same as a PERF_EVENT_TYPE_HARDWARE event (e.g. as is the case for
the M1/M2 PMU's 'cycles' and 'instructions' events).
Fixes: 82fe2e45cd ("perf pmus: Check if we can encode the PMU number in perf_event_attr.type")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@arm.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Cc: Hector Martin <marcan@marcan.st>
Cc: James Clark <james.clark@arm.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240126145605.1005472-1-mark.rutland@arm.com
By default tests are forked, add an option (-p or --parallel) so that
the forked tests are all started in parallel and then their output
gathered serially. This is opt-in as running in parallel can cause
test flakes.
Rather than fork within the code, the start_command/finish_command
from libsubcmd are used. This changes how stderr and stdout are
handled. The child stderr and stdout are always read to avoid the
child blocking. If verbose is 1 (-v) then if the test fails the child
stdout and stderr are displayed. If the verbose is >1 (e.g. -vv) then
the stdout and stderr from the child are immediately displayed.
An unscientific test on my laptop shows the wall clock time for perf
test without parallel being 5 minutes 21 seconds and with parallel
(-p) being 1 minute 50 seconds.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-9-irogers@google.com
Rather than special shell test logic, do a single pass to create an
array of test suites. Hold the shell test file name in the test suite
priv field. This makes the special shell test logic in builtin-test.c
redundant so remove it.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-8-irogers@google.com
Avoid filename appending buffers by using openat, faccessat and
scandirat more widely. Turn the script's path back to a file name
using readlink from /proc/<pid>/fd/<fd>.
Read the script's description using api/io.h to avoid fdopen
conversions. Whilst reading perform additional sanity checks on the
script's contents.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-7-irogers@google.com
builtin-test-list is primarily concerned with shell script
tests. Rename the file to better reflect this and add a missed header
guard.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-6-irogers@google.com
perf test -vv Symbols is used to indentify symbols within the perf
binary. Add the -F flag so that the test command doesn't fork the test
before running. This removes a little overhead.
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-4-irogers@google.com
scandirat is used during the printing of tracepoint events but may be
missing from certain libcs. Add a compatibility implementation that
uses the symlink of an fd in /proc as a path for the reliably present
scandir.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-3-irogers@google.com
Scanning /proc is inherently racy. Scanning /proc/pid/task within that
is also racy as the pid can terminate. Rather than failing in
__thread_map__new_all_cpus, skip pids for such failures.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-2-irogers@google.com
Correct the short description of the following events:
DCW_REQ, DCW_REQ_CHIP_HIT, DCW_REQ_DRAWER_HIT, DCW_REQ_IV,
DCW_ON_CHIP, DCW_ON_CHIP_IV, DCW_ON_CHIP_CHIP_HIT,
DCW_ON_CHIP_DRAWER_HIT, CW_ON_MODULE, DCW_ON_DRAWER,
DCW_OFF_DRAWER, IDCW_ON_MODULE_IV, IDCW_ON_MODULE_CHIP_HIT,
IDCW_ON_MODULE_DRAWER_HIT, IDCW_ON_DRAWER_IV, IDCW_ON_DRAWER_CHIP_HIT,
IDCW_ON_DRAWER_DRAWER_HIT, IDCW_OFF_DRAWER_IV, IDCW_OFF_DRAWER_CHIP_HIT,
IDCW_OFF_DRAWER_DRAWER_HIT, ICW_REQ, ICW_REQ_IV, CW_REQ_CHIP_HIT,
ICW_REQ_DRAWER_HIT, ICW_ON_CHIP, ICW_ON_CHIP_IV, ICW_ON_CHIP_CHIP_HIT,
ICW_ON_CHIP_DRAWER_HIT, ICW_ON_MODULE and ICW_OFF_DRAWER.
The second Cache should be L2-Cache.
Output before (display diff of the first four events)
# perf list -d
DCW_REQ
[Directory Write Level 1 Data Cache from Cache. Unit: cpum_cf]
DCW_REQ_CHIP_HIT
[Directory Write Level 1 Data Cache from Cache with Chip HP \
Hit. Unit: cpum_cf]
DCW_REQ_DRAWER_HIT
[Directory Write Level 1 Data Cache from Cache with Drawer \
HP Hit. Unit: cpum_cf]
DCW_REQ_IV
[Directory Write Level 1 Data Cache from Cache with Intervention. \
Unit: cpum_cf]
Output after:
# perf list -d
DCW_REQ
[Directory Write Level 1 Data Cache from L2-Cache. Unit: cpum_cf]
DCW_REQ_CHIP_HIT
[Directory Write Level 1 Data Cache from L2-Cache with Chip HP \
Hit. Unit: cpum_cf]
DCW_REQ_DRAWER_HIT
[Directory Write Level 1 Data Cache from L2-Cache with Drawer \
HP Hit. Unit: cpum_cf]
DCW_REQ_IV
[Directory Write Level 1 Data Cache from L2-Cache with \
Intervention. Unit: cpum_cf]
Fixes: 7f76b31130 ("perf list: Add IBM z16 event description for s390")
Reported-by: Andreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Andreas Krebbel <krebbel@linux.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Cc: svens@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221091908.1759083-1-tmricht@linux.ibm.com
Pass metric_expr and evsel rather than specific variables from the
struct, thereby reducing the number of arguments. This will enable
later fixes.
To reduce the size of the diff, local variables are added to match the
previous parameter names. This isn't done in the case of "name" as
evsel->name is more intention revealing. A whitespace issue is also
addressed.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221070754.4163916-1-irogers@google.com
Now perf can show assembly instructions with libcapstone for x86, and the
capstone is better in general.
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: changbin.du@gmail.com
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240217074046.4100789-6-changbin.du@huawei.com
Currently, the instructions of samples are shown as raw hex strings
which are hard to read. x86 has a special option '--xed' to disassemble
the hex string via intel XED tool.
Here we use capstone as our disassembler engine to give more friendly
instructions. We select libcapstone because capstone can provide more
insn details. Perf will fallback to raw instructions if libcapstone is
not available.
The advantages compared to XED tool:
* Support arm, arm64, x86-32, x86_64 (more could be supported),
xed only for x86_64.
* Immediate address operands are shown as symbol+offs.
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: changbin.du@gmail.com
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240217074046.4100789-3-changbin.du@huawei.com
Later we will use libcapstone to disassemble instructions of samples.
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: changbin.du@gmail.com
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240217074046.4100789-2-changbin.du@huawei.com
If perf list is invoked with 'metricgroups' include the description
unless it is invoked with flags to exclude it. Make the description of
metricgroup dumping dependent on the desc flag in print_state as with
metrics.
Before:
```
$ perf list metricgroups
List of pre-defined events (to be used in -e or -M):
Metric Groups:
Backend
Bad
BadSpec
...
```
After:
```
$ perf list metricgroups
List of pre-defined events (to be used in -e or -M):
Metric Groups:
Backend [Grouping from Top-down Microarchitecture Analysis Metrics spreadsheet]
Bad [Grouping from Top-down Microarchitecture Analysis Metrics spreadsheet]
BadSpec
...
```
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240216192044.119897-1-irogers@google.com
I got a strange error on ARM to fail on processing FINISHED_ROUND
record. It turned out that it was failing in symbol__alloc_hist()
because the symbol size is too big.
When a sample is captured on a specific BPF program, it failed. I've
added a debug code and found the end address of the symbol is from
the next module which is placed far way.
ffff800008795778-ffff80000879d6d8: bpf_prog_1bac53b8aac4bc58_netcg_sock [bpf]
ffff80000879d6d8-ffff80000ad656b4: bpf_prog_76867454b5944e15_netcg_getsockopt [bpf]
ffff80000ad656b4-ffffd69b7af74048: bpf_prog_1d50286d2eb1be85_hn_egress [bpf] <---------- here
ffffd69b7af74048-ffffd69b7af74048: $x.5 [sha3_generic]
ffffd69b7af74048-ffffd69b7af740b8: crypto_sha3_init [sha3_generic]
ffffd69b7af740b8-ffffd69b7af741e0: crypto_sha3_update [sha3_generic]
The logic in symbols__fixup_end() just uses curr->start to update the
prev->end. But in this case, it won't work as it's too different.
I think ARM has a different kernel memory layout for modules and BPF
than on x86. Actually there's a logic to handle kernel and module
boundary. Let's do the same for symbols between different modules.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Leo Yan <leo.yan@linux.dev>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240212233322.1855161-1-namhyung@kernel.org
Top-Down Microarchitecture Analysis (TMA) metrics simplify
cycle-accounting using microarchitecture-abstracted metrics
organized in one hierarchy. This update is from version 4.5 to
4.7.
The update includes:
- tma_info_bottleneck* metrics, an abstraction or summarization of
the 100+ TMA tree nodes into 12-entry familiar performance metrics.
- Reduce number of events (multiplexing) for tma_info_system_gflops,
tma_info_core_flopc, tma_info_inst_mix_ipflop and tma_ports_utilized_0.
- Fixes for tma_info_bottleneck_mispredictions and
tma_info_bad_spec_branch_misprediction_cost.
- New tma_info_inst_mix_ippause metric.
- tma_serializing_operation is raised to level 3.
- Swapped tma_info_core_ilp (becomes per SMT thread) and
tma_info_pipeline_execute (per physical core).
- tma_nop_instructions and tma_shuffles_256b are lowered to level 4
under tma_other_light_ops_group.
- Reduced number of events when SMT is off.
- Tuned thresholds for tma_info_bottleneck_branching_overhead,
tma_fetch_bandwidth and tma_ports_utilized_3m.
The update came from:
https://github.com/intel/perfmon/pull/140https://github.com/intel/perfmon/pull/138
Running the script:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-31-irogers@google.com
Top-Down Microarchitecture Analysis (TMA) metrics simplify
cycle-accounting using microarchitecture-abstracted metrics
organized in one hierarchy. This update is from version 4.5 to
4.7.
The update includes:
- tma_info_bottleneck* metrics, an abstraction or summarization of
the 100+ TMA tree nodes into 12-entry familiar performance metrics.
- Reduce number of events (multiplexing) for tma_info_system_gflops,
tma_info_core_flopc, tma_info_inst_mix_ipflop and tma_ports_utilized_0.
- Fixes for tma_info_bottleneck_mispredictions and
tma_info_bad_spec_branch_misprediction_cost.
- tma_serializing_operation is raised to level 3.
- Swapped tma_info_core_ilp (becomes per SMT thread) and
tma_info_pipeline_execute (per physical core).
- tma_nop_instructions and tma_shuffles_256b are lowered to level 4
under tma_other_light_ops_group.
- Reduced number of events when SMT is off.
- Tuned thresholds for tma_info_bottleneck_branching_overhead,
tma_fetch_bandwidth and tma_ports_utilized_3m.
The update came from:
https://github.com/intel/perfmon/pull/140https://github.com/intel/perfmon/pull/138
Running the script:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-30-irogers@google.com
Top-Down Microarchitecture Analysis (TMA) metrics simplify
cycle-accounting using microarchitecture-abstracted metrics
organized in one hierarchy. This update is from version 4.5 to
4.7.
The update includes:
- tma_info_bottleneck* metrics, an abstraction or summarization of
the 100+ TMA tree nodes into 12-entry familiar performance metrics.
- Reduce number of events (multiplexing) for tma_info_system_gflops,
tma_info_core_flopc, tma_info_inst_mix_ipflop and tma_ports_utilized_0.
- Fixes for tma_info_bottleneck_mispredictions and
tma_info_bad_spec_branch_misprediction_cost.
- tma_serializing_operation is raised to level 3.
- Swapped tma_info_core_ilp (becomes per SMT thread) and
tma_info_pipeline_execute (per physical core).
- tma_nop_instructions and tma_shuffles_256b are lowered to level 4
under tma_other_light_ops_group.
- Reduced number of events when SMT is off.
- Tuned thresholds for tma_info_bottleneck_branching_overhead,
tma_fetch_bandwidth and tma_ports_utilized_3m.
The update came from:
https://github.com/intel/perfmon/pull/140https://github.com/intel/perfmon/pull/138
Running the script:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-29-irogers@google.com
Top-Down Microarchitecture Analysis (TMA) metrics simplify
cycle-accounting using microarchitecture-abstracted metrics
organized in one hierarchy. This update is from version 4.5 to
4.7.
The update includes:
- tma_info_bottleneck* metrics, an abstraction or summarization of
the 100+ TMA tree nodes into 12-entry familiar performance metrics.
- tma_c01_wait and tma_c02_wait metrics measure power-performance
states.
- Reduce number of events (multiplexing) for tma_info_system_gflops,
tma_info_core_flopc, tma_info_inst_mix_ipflop and tma_ports_utilized_0.
- Fixes for tma_info_bottleneck_mispredictions and
tma_info_bad_spec_branch_misprediction_cost.
- New tma_info_inst_mix_ippause metric.
- tma_serializing_operation is raised to level 3.
- Swapped tma_info_core_ilp (becomes per SMT thread) and
tma_info_pipeline_execute (per physical core).
- tma_nop_instructions and tma_shuffles_256b are lowered to level 4
under tma_other_light_ops_group.
- Reduced number of events when SMT is off.
- Tuned thresholds for tma_info_bottleneck_branching_overhead,
tma_fetch_bandwidth and tma_ports_utilized_3m.
The update came from:
https://github.com/intel/perfmon/pull/140https://github.com/intel/perfmon/pull/138
Running the script:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-28-irogers@google.com
Top-Down Microarchitecture Analysis (TMA) metrics simplify
cycle-accounting using microarchitecture-abstracted metrics
organized in one hierarchy. This update is from version 4.5 to
4.7.
The update includes:
- Add metrics tma_fp_vector_128b, tma_fp_vector_256b and
tma_info_system_cpus_utilized.
- Remove metrics tma_info_system_mem_parallel_requests,
tma_info_system_core_frequency and
tma_info_system_mem_request_latency.
- Swapped tma_info_core_ilp (becomes per SMT thread) and
tma_info_pipeline_execute (per physical core).
- Tuned thresholds for tma_fetch_bandwidth.
The update came from:
https://github.com/intel/perfmon/pull/140https://github.com/intel/perfmon/pull/138
Running the script:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-27-irogers@google.com
Top-Down Microarchitecture Analysis (TMA) metrics simplify
cycle-accounting using microarchitecture-abstracted metrics
organized in one hierarchy. This update is from version 4.5 to
4.7.
The update includes:
- tma_info_bottleneck* metrics, an abstraction or summarization of
the 100+ TMA tree nodes into 12-entry familiar performance metrics.
- Reduce number of events (multiplexing) for tma_info_system_gflops,
tma_info_core_flopc, tma_info_inst_mix_ipflop and tma_ports_utilized_0.
- Fixes for tma_info_bottleneck_mispredictions and
tma_info_bad_spec_branch_misprediction_cost.
- New tma_info_inst_mix_ippause metric.
- tma_serializing_operation is raised to level 3.
- Swapped tma_info_core_ilp (becomes per SMT thread) and
tma_info_pipeline_execute (per physical core).
- tma_nop_instructions and tma_shuffles_256b are lowered to level 4
under tma_other_light_ops_group.
- Reduced number of events when SMT is off.
- Tuned thresholds for tma_info_bottleneck_branching_overhead,
tma_fetch_bandwidth and tma_ports_utilized_3m.
The update came from:
https://github.com/intel/perfmon/pull/140https://github.com/intel/perfmon/pull/138
Running the script:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-26-irogers@google.com
Top-Down Microarchitecture Analysis (TMA) metrics simplify
cycle-accounting using microarchitecture-abstracted metrics
organized in one hierarchy. This update is from version 4.5 to
4.7.
The update includes:
- Swapped tma_info_core_ilp (becomes per SMT thread) and
tma_info_pipeline_execute (per physical core).
- Tuned thresholds for tma_fetch_bandwidth.
The update came from:
https://github.com/intel/perfmon/pull/140https://github.com/intel/perfmon/pull/138
Running the script:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-25-irogers@google.com
Top-Down Microarchitecture Analysis (TMA) metrics simplify
cycle-accounting using microarchitecture-abstracted metrics
organized in one hierarchy. This update is from version 4.5 to
4.7.
The update includes:
- Swapped tma_info_core_ilp (becomes per SMT thread) and
tma_info_pipeline_execute (per physical core).
- Reduced number of events when SMT is off.
- Tuned thresholds for tma_fetch_bandwidth and
tma_ports_utilized_3m.
The update came from:
https://github.com/intel/perfmon/pull/140https://github.com/intel/perfmon/pull/138
Running the script:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-24-irogers@google.com
Top-Down Microarchitecture Analysis (TMA) metrics simplify
cycle-accounting using microarchitecture-abstracted metrics
organized in one hierarchy. This update is from version 4.5 to
4.7.
The update includes:
- Swapped tma_info_core_ilp (becomes per SMT thread) and
tma_info_pipeline_execute (per physical core).
- Reduced number of events when SMT is off.
- Tuned thresholds for tma_fetch_bandwidth and
tma_ports_utilized_3m.
The update came from:
https://github.com/intel/perfmon/pull/140https://github.com/intel/perfmon/pull/138
Running the script:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-23-irogers@google.com
Top-Down Microarchitecture Analysis (TMA) metrics simplify
cycle-accounting using microarchitecture-abstracted metrics
organized in one hierarchy. This update is from version 4.5 to
4.7.
The update includes:
- tma_info_bottleneck* metrics, an abstraction or summarization of
the 100+ TMA tree nodes into 12-entry familiar performance metrics.
- Reduce number of events (multiplexing) for tma_info_system_gflops,
tma_info_core_flopc, tma_info_inst_mix_ipflop and tma_ports_utilized_0.
- Fixes for tma_info_bottleneck_mispredictions and
tma_info_bad_spec_branch_misprediction_cost.
- New tma_info_inst_mix_ippause metric.
- tma_serializing_operation is raised to level 3.
- Swapped tma_info_core_ilp (becomes per SMT thread) and
tma_info_pipeline_execute (per physical core).
- tma_nop_instructions and tma_shuffles_256b are lowered to level 4
under tma_other_light_ops_group.
- Reduced number of events when SMT is off.
- Tuned thresholds for tma_info_bottleneck_branching_overhead,
tma_fetch_bandwidth and tma_ports_utilized_3m.
The update came from:
https://github.com/intel/perfmon/pull/140https://github.com/intel/perfmon/pull/138
Running the script:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-22-irogers@google.com
Top-Down Microarchitecture Analysis (TMA) metrics simplify
cycle-accounting using microarchitecture-abstracted metrics
organized in one hierarchy. This update is from version 4.5 to
4.7.
The update includes:
- tma_info_bottleneck* metrics, an abstraction or summarization of
the 100+ TMA tree nodes into 12-entry familiar performance metrics.
- Reduce number of events (multiplexing) for tma_info_system_gflops,
tma_info_core_flopc, tma_info_inst_mix_ipflop and tma_ports_utilized_0.
- Fixes for tma_info_bottleneck_mispredictions and
tma_info_bad_spec_branch_misprediction_cost.
- New tma_info_inst_mix_ippause metric.
- tma_serializing_operation is raised to level 3.
- Swapped tma_info_core_ilp (becomes per SMT thread) and
tma_info_pipeline_execute (per physical core).
- tma_nop_instructions and tma_shuffles_256b are lowered to level 4
under tma_other_light_ops_group.
- Reduced number of events when SMT is off.
- Tuned thresholds for tma_info_bottleneck_branching_overhead,
tma_fetch_bandwidth and tma_ports_utilized_3m.
The update came from:
https://github.com/intel/perfmon/pull/140https://github.com/intel/perfmon/pull/138
Running the script:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-21-irogers@google.com
Top-Down Microarchitecture Analysis (TMA) metrics simplify
cycle-accounting using microarchitecture-abstracted metrics
organized in one hierarchy. This update is from version 4.5 to
4.7.
The update includes:
- Swapped tma_info_core_ilp (becomes per SMT thread) and
tma_info_pipeline_execute (per physical core).
- Tuned thresholds for tma_fetch_bandwidth and
tma_ports_utilized_3m.
The update came from:
https://github.com/intel/perfmon/pull/140https://github.com/intel/perfmon/pull/138
Running the script:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-20-irogers@google.com
Top-Down Microarchitecture Analysis (TMA) metrics simplify
cycle-accounting using microarchitecture-abstracted metrics
organized in one hierarchy. This update is from version 4.5 to
4.7.
The update includes:
- Swapped tma_info_core_ilp (becomes per SMT thread) and
tma_info_pipeline_execute (per physical core).
- Tuned thresholds for tma_fetch_bandwidth and
tma_ports_utilized_3m.
The update came from:
https://github.com/intel/perfmon/pull/140https://github.com/intel/perfmon/pull/138
Running the script:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-19-irogers@google.com
Top-Down Microarchitecture Analysis (TMA) metrics simplify
cycle-accounting using microarchitecture-abstracted metrics
organized in one hierarchy. This update is from version 4.5 to
4.7.
The update includes:
- tma_info_bottleneck* metrics, an abstraction or summarization of
the 100+ TMA tree nodes into 12-entry familiar performance metrics.
- Reduce number of events (multiplexing) for tma_info_system_gflops,
tma_info_core_flopc, tma_info_inst_mix_ipflop and tma_ports_utilized_0.
- Fixes for tma_info_bottleneck_mispredictions and
tma_info_bad_spec_branch_misprediction_cost.
- New tma_info_inst_mix_ippause metric.
- tma_serializing_operation is raised to level 3.
- Swapped tma_info_core_ilp (becomes per SMT thread) and
tma_info_pipeline_execute (per physical core).
- tma_nop_instructions and tma_shuffles_256b are lowered to level 4
under tma_other_light_ops_group.
- Reduced number of events when SMT is off.
- Tuned thresholds for tma_info_bottleneck_branching_overhead,
tma_fetch_bandwidth and tma_ports_utilized_3m.
The update came from:
https://github.com/intel/perfmon/pull/140https://github.com/intel/perfmon/pull/138
Running the script:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-18-irogers@google.com
Top-Down Microarchitecture Analysis (TMA) metrics simplify
cycle-accounting using microarchitecture-abstracted metrics
organized in one hierarchy. This update is from version 4.5 to
4.7.
The update includes:
- Reduce number of events (multiplexing) for tma_info_system_gflops,
tma_info_core_flopc and tma_info_inst_mix_ipflop.
- Removal of tma_info_bad_spec_branch_misprediction_cost.
- Swapped tma_info_core_ilp (becomes per SMT thread) and
tma_info_pipeline_execute (per physical core).
- Tuned thresholds for tma_fetch_bandwidth and tma_ports_utilized_3m.
The update came from:
https://github.com/intel/perfmon/pull/140https://github.com/intel/perfmon/pull/138
Running the script:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-17-irogers@google.com
Top-Down Microarchitecture Analysis (TMA) metrics simplify
cycle-accounting using microarchitecture-abstracted metrics
organized in one hierarchy. This update is from version 4.5 to
4.7.
The update includes:
- Reduce number of events (multiplexing) for tma_info_system_gflops,
tma_info_core_flopc and tma_info_inst_mix_ipflop.
- Removal of tma_info_bad_spec_branch_misprediction_cost.
- Swapped tma_info_core_ilp (becomes per SMT thread) and
tma_info_pipeline_execute (per physical core).
- Tuned thresholds for tma_fetch_bandwidth and tma_ports_utilized_3m.
The update came from:
https://github.com/intel/perfmon/pull/140https://github.com/intel/perfmon/pull/138
Running the script:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-16-irogers@google.com
Top-Down Microarchitecture Analysis (TMA) metrics simplify
cycle-accounting using microarchitecture-abstracted metrics
organized in one hierarchy. This update is from version 4.5 to
4.7.
The update includes:
- Reduce number of events (multiplexing) for tma_info_system_gflops,
tma_info_core_flopc and tma_info_inst_mix_ipflop.
- Removal of tma_info_bad_spec_branch_misprediction_cost.
- Swapped tma_info_core_ilp (becomes per SMT thread) and
tma_info_pipeline_execute (per physical core).
- Tuned thresholds for tma_fetch_bandwidth and tma_ports_utilized_3m.
The update came from:
https://github.com/intel/perfmon/pull/140https://github.com/intel/perfmon/pull/138
Running the script:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-15-irogers@google.com
Top-Down Microarchitecture Analysis (TMA) metrics simplify
cycle-accounting using microarchitecture-abstracted metrics
organized in one hierarchy. This update is from version 4.5 to
4.7.
The update includes:
- tma_info_bottleneck* metrics, an abstraction or summarization of
the 100+ TMA tree nodes into 12-entry familiar performance metrics.
- tma_c01_wait and tma_c02_wait metrics measure power-performance
states.
- Reduce number of events (multiplexing) for tma_info_system_gflops,
tma_info_core_flopc, tma_info_inst_mix_ipflop and tma_ports_utilized_0.
- Fixes for tma_info_bottleneck_mispredictions and
tma_info_bad_spec_branch_misprediction_cost.
- New tma_info_inst_mix_ippause metric.
- tma_serializing_operation is raised to level 3.
- Swapped tma_info_core_ilp (becomes per SMT thread) and
tma_info_pipeline_execute (per physical core).
- tma_nop_instructions and tma_shuffles_256b are lowered to level 4
under tma_other_light_ops_group.
- Reduced number of events when SMT is off.
- Tuned thresholds for tma_info_bottleneck_branching_overhead,
tma_fetch_bandwidth and tma_ports_utilized_3m.
The update came from:
https://github.com/intel/perfmon/pull/140https://github.com/intel/perfmon/pull/138
Running the script:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-14-irogers@google.com
Update alderlake events to v1.15 released in:
282a6951fd
Documentation fixes, removal of TOPDOWN.BR_MISPREDICT_SLOTS,
deprecation of UNC_ARB_DAT_REQUESTS.RD, UNC_ARB_DAT_REQUESTS.RD and
UNC_ARB_IFA_OCCUPANCY.ALL.
Event json automatically generated by:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-13-irogers@google.com
Update sierraforest events to v1.01 released in:
582bca24aa
Adds the majority of core and uncore events.
Event json automatically generated by:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-11-irogers@google.com
Update haswell events to v35 released in:
c0f9b34d42
Updates "must be precise" on RTM_RETIRED.ABORTED.
Event json automatically generated by:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-7-irogers@google.com
Update grandridge events to v1.01 released in:
211d607165
Adds the majority of core and uncore events.
Event json automatically generated by:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-6-irogers@google.com
Update broadwell events to v29 released in:
47117146c6
Updates "must be precise" on RTM_RETIRED.ABORTED.
Event json automatically generated by:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214011820.644458-4-irogers@google.com
If we instead decide to generate vmlinux.h from BTF info, it will be
there:
$ pahole timespec64
struct timespec64 {
time64_t tv_sec; /* 0 8 */
long int tv_nsec; /* 8 8 */
/* size: 16, cachelines: 1, members: 2 */
/* last cacheline: 16 bytes */
};
$
pahole manages to find it from /sys/kernel/btf/vmlinux, that is
generated from the kernel types.
With this linux/bpf.h doesn't need to be included, as its already in the
minimalistic tools/perf/util/bpf_skel/vmlinux/vmlinux.h file or what we
need comes when generating a vmlinux.h file from BTF info, i.e. when
using GEN_VMLINUX_H=1, as noticed by Namyung in a build break before
removing linux/bpf.h.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/Zc_fp6CgDClPhS_O@x1
As a form of validation, it is a common practice to check the outputs
of commands whether they contain expected patterns or match a certain
regex.
Add helpers for verifying that all regexes are found in the output, that
all lines match any pattern from a set and that a certain expression is
not present in the output.
In verbose mode these helpers log mismatches for easier failure
investigation.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: kjain@linux.ibm.com
Cc: atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240215110231.15385-6-mpetlan@redhat.com
Add new perf probe test case that acts as an entry element in perf test
list. Runs multiple subtests from directory "base_probe", which will be
added in incomming patches and can be expanded without further editing.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: kjain@linux.ibm.com
Cc: atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240215110231.15385-5-mpetlan@redhat.com
Unify perf regexes for checking testing output into a single file
to reduce duplicates and prevent errors when editing.
This will be used in upcomming patches in shell tests.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: kjain@linux.ibm.com
Cc: atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240215110231.15385-2-mpetlan@redhat.com
The test needs a struct machine and creates one for the current host,
but a side-effect is that struct machine has set up kernel maps
including module maps.
If the 'Symbols' test --dso option specifies a current kernel module,
it will already be present as a kernel dso, and a map with kmaps needs
to be used otherwise there will be a segfault - see below.
For that case, find the existing map and use that. In that case also,
the dso is split by section into multiple dsos, so test those dsos
also. That in turn, shows up that those dsos have not had overlapping
symbols removed, so the test fails.
Example:
Before:
$ perf test -F -v Symbols --dso /lib/modules/$(uname -r)/kernel/arch/x86/kvm/kvm-intel.ko
70: Symbols :
--- start ---
Testing /lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko
Segmentation fault (core dumped)
After:
$ perf test -F -v Symbols --dso /lib/modules/$(uname -r)/kernel/arch/x86/kvm/kvm-intel.ko
70: Symbols :
--- start ---
Testing /lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko
Overlapping symbols:
41d30-41fbb l vmx_init
41d30-41fbb g init_module
---- end ----
Symbols: FAILED!
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240131192416.16387-1-adrian.hunter@intel.com
The target is to allow the tool to always enable the perf register
feature for native parsing and cross parsing, and current code doesn't
depend on the macro 'HAVE_PERF_REGS_SUPPORT'.
This patch remove the variable 'NO_PERF_REGS' and the defined macro
'HAVE_PERF_REGS_SUPPORT' from the Makefile.
Signed-off-by: Leo Yan <leo.yan@linux.dev>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214113947.240957-5-leo.yan@linux.dev
Every architecture can provide a register list for sampling. If an
architecture doesn't support register sampling, it won't define the data
structure 'sample_reg_masks'. Consequently, any code using this
structure must be protected by the macro 'HAVE_PERF_REGS_SUPPORT'.
This patch defines a weak function, arch__sample_reg_masks(), which will
be replaced by an architecture-defined function for returning the
architecture's register list. With this refactoring, the function always
exists, the condition checking for 'HAVE_PERF_REGS_SUPPORT' is not
needed anymore, so remove it.
Signed-off-by: Leo Yan <leo.yan@linux.dev>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214113947.240957-4-leo.yan@linux.dev
Currently, the macro HAVE_PERF_REGS_SUPPORT is used as a switch to turn
on or turn off the code of perf registers. If any architecture cannot
support perf register, it disables the perf register parsing, for both
the native parsing and cross parsing for other architectures.
To support both the native parsing and cross parsing, the tool should
always build the perf regs functions. Thus, this patch removes
HAVE_PERF_REGS_SUPPORT from the perf regs files.
Signed-off-by: Leo Yan <leo.yan@linux.dev>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214113947.240957-3-leo.yan@linux.dev
CONFIG_PERF_REGS is not used, remove it.
Signed-off-by: Leo Yan <leo.yan@linux.dev>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240214113947.240957-2-leo.yan@linux.dev
Counts were switched from the scaled saved value form to the
aggregated count to avoid double accounting. When this happened the
removing of scaling for a count should have been removed, however, it
wasn't and this wasn't observed as it normally doesn't matter because
a counter's scale is 1. A problem was observed with RAPL events that
are scaled.
Fixes: 37cc8ad77c ("perf metric: Directly use counts rather than saved_value")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240209204947.3873294-5-irogers@google.com
Cycles is recognized as part of a hard coded metric in stat-shadow.c,
it may call print_metric_only with a NULL fmt string leading to a
segfault. Handle the NULL fmt explicitly.
Fixes: 088519f318 ("perf stat: Move the display functions to stat-display.c")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240209204947.3873294-4-irogers@google.com
Events in metrics cannot use '/' as a separator, it would be
recognized as a divide, so they use '@'. The '@' is recognized in the
metricgroups code and changed to '/', do the same in the has_event
function so that the parsing is only tried without the @s.
Fixes: 4a4a9bf907 ("perf expr: Add has_event function")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240209204947.3873294-3-irogers@google.com
Currently only floating point numbers can be parsed, add a special
case for NaN.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kaige Ye <ye@kaige.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240209204947.3873294-2-irogers@google.com
After this change maps__nr_maps is only used by tests, existing users
are migrated to maps__empty. Compute maps__empty under the read lock.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Artem Savkov <asavkov@redhat.com>
Cc: bpf@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240210031746.4057262-7-irogers@google.com
Move the struct into the C file. Add maps__equal to work around
exposing the struct for reference count checking. Add accessors for
the unwind_libunwind_ops. Move maps_list_node to its only use in
symbol.c.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Artem Savkov <asavkov@redhat.com>
Cc: bpf@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240210031746.4057262-6-irogers@google.com
Finding a map is done under a lock, returning the map without a
reference count means it can be removed without notice and causing
uses after free. Grab a reference count to the map within the lock
region and return this. Fix up locations that need a map__put
following this.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Artem Savkov <asavkov@redhat.com>
Cc: bpf@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240210031746.4057262-5-irogers@google.com
Finding a map is done under a lock, returning the map without a
reference count means it can be removed without notice and causing
uses after free. Grab a reference count to the map within the lock
region and return this. Fix up locations that need a map__put
following this. Also fix some reference counted pointer comparisons.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Artem Savkov <asavkov@redhat.com>
Cc: bpf@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240210031746.4057262-4-irogers@google.com
Finding a map is done under a lock, returning the map without a
reference count means it can be removed without notice and causing
uses after free. Grab a reference count to the map within the lock
region and return this. Fix up locations that need a map__put
following this.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Artem Savkov <asavkov@redhat.com>
Cc: bpf@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240210031746.4057262-3-irogers@google.com
Maps is a collection of maps primarily sorted by the starting address
of the map. Prior to this change the maps were held in an rbtree
requiring 4 pointers per node. Prior to reference count checking, the
rbnode was embedded in the map so 3 pointers per node were
necessary. This change switches the rbtree to an array lazily sorted
by address, much as the array sorting nodes by name. 1 pointer is
needed per node, but to avoid excessive resizing the backing array may
be twice the number of used elements. Meaning the memory overhead is
roughly half that of the rbtree. For a perf record with
"--no-bpf-event -g -a" of true, the memory overhead of perf inject is
reduce fom 3.3MB to 3MB, so 10% or 300KB is saved.
Map inserts always happen at the end of the array. The code tracks
whether the insertion violates the sorting property. O(log n) rb-tree
complexity is switched to O(1).
Remove slides the array, so O(log n) rb-tree complexity is degraded to
O(n).
A find may need to sort the array using qsort which is O(n*log n), but
in general the maps should be sorted and so average performance should
be O(log n) as with the rbtree.
An rbtree node consumes a cache line, but with the array 4 nodes fit
on a cache line. Iteration is simplified to scanning an array rather
than pointer chasing.
Overall it is expected the performance after the change should be
comparable to before, but with half of the memory consumed.
To avoid a list and repeated logic around splitting maps,
maps__merge_in is rewritten in terms of
maps__fixup_overlap_and_insert. maps_merge_in splits the given mapping
inserting remaining gaps. maps__fixup_overlap_and_insert splits the
existing mappings, then adds the incoming mapping. By adding the new
mapping first, then re-inserting the existing mappings the splitting
behavior matches.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Artem Savkov <asavkov@redhat.com>
Cc: bpf@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240210031746.4057262-2-irogers@google.com
The child_process for addr2line sets in and out to -1 so that pipes
get created. It is the caller's responsibility to close the pipes,
finish_command doesn't do it. Add the missed closes.
Fixes: b3801e7912 ("perf srcline: Simplify addr2line subprocess")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Tom Rix <trix@redhat.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240201001504.1348511-8-irogers@google.com
Some platforms have 'cluster' topology and CPUs in the cluster will
share resources like L3 Cache Tag (for HiSilicon Kunpeng SoC) or L2
cache (for Intel Jacobsville). Currently parsing and building cluster
topology have been supported since [1].
perf stat has already supported aggregation for other topologies like
die or socket, etc. It'll be useful to aggregate per-cluster to find
problems like L3T bandwidth contention.
This patch add support for "--per-cluster" option for per-cluster
aggregation. Also update the docs and related test. The output will
be like:
[root@localhost tmp]# perf stat -a -e LLC-load --per-cluster -- sleep 5
Performance counter stats for 'system wide':
S56-D0-CLS158 4 1,321,521,570 LLC-load
S56-D0-CLS594 4 794,211,453 LLC-load
S56-D0-CLS1030 4 41,623 LLC-load
S56-D0-CLS1466 4 41,646 LLC-load
S56-D0-CLS1902 4 16,863 LLC-load
S56-D0-CLS2338 4 15,721 LLC-load
S56-D0-CLS2774 4 22,671 LLC-load
[...]
On a legacy system without cluster or cluster support, the output will
be look like:
[root@localhost perf]# perf stat -a -e cycles --per-cluster -- sleep 1
Performance counter stats for 'system wide':
S56-D0-CLS0 64 18,011,485 cycles
S7182-D0-CLS0 64 16,548,835 cycles
Note that this patch doesn't mix the cluster information in the outputs
of --per-core to avoid breaking any tools/scripts using it.
Note that perf recently supports "--per-cache" aggregation, but it's not
the same with the cluster although cluster CPUs may share some cache
resources. For example on my machine all clusters within a die share the
same L3 cache:
$ cat /sys/devices/system/cpu/cpu0/cache/index3/shared_cpu_list
0-31
$ cat /sys/devices/system/cpu/cpu0/topology/cluster_cpus_list
0-3
[1] commit c5e22feffd ("topology: Represent clusters of CPUs within a die")
Tested-by: Jie Zhan <zhanjie9@hisilicon.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: james.clark@arm.com
Cc: 21cnbao@gmail.com
Cc: prime.zeng@hisilicon.com
Cc: Jonathan.Cameron@huawei.com
Cc: fanghao11@huawei.com
Cc: linuxarm@huawei.com
Cc: tim.c.chen@intel.com
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240208024026.2691-1-yangyicong@huawei.com
When it converts sample IP to or from objdump-capable one, there's a
comment saying that kernel modules have DSO_SPACE__USER. But commit
02213cec64 ("perf maps: Mark module DSOs with kernel type") changed
it and makes the comment confusing. Let's get rid of it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20240208181025.1329645-1-namhyung@kernel.org
slist needs to be freed in both error path and normal path in
thread_map__new_by_tid_str().
Fixes: b52956c961 ("perf tools: Allow multiple threads or processes in record, stat, top")
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-6-yangjihong1@huawei.com
perf_sched__map() needs to free memory of map_cpus, color_pids and
color_cpus in normal path and rollback allocated memory in error path.
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206083228.172607-3-yangjihong1@huawei.com
stat+std_output.sh test fails on my arm64 machine:
[root@localhost shell]# ./stat+std_output.sh
Checking STD output: no args Unknown event name in TopDownL1 # 0.18 retiring
[root@localhost shell]# ./stat+std_output.sh
Checking STD output: no args [Success]
Checking STD output: system wide [Success]
Checking STD output: interval [Success]
Checking STD output: per thread Unknown event name in tmux: server-1114960 # 0.41 frontend_bound
When no args specified `perf stat` will add TopdownL1 metric group
and the output will be like:
[root@localhost shell]# perf stat -- stress-ng --vm 1 --timeout 1
stress-ng: info: [3351733] setting to a 1 second run per stressor
stress-ng: info: [3351733] dispatching hogs: 1 vm
stress-ng: info: [3351733] successful run completed in 1.02s
Performance counter stats for 'stress-ng --vm 1 --timeout 1':
1,037.71 msec task-clock # 1.000 CPUs utilized
13 context-switches # 12.528 /sec
1 cpu-migrations # 0.964 /sec
67,544 page-faults # 65.090 K/sec
2,691,932,561 cycles # 2.594 GHz (74.56%)
6,571,333,653 instructions # 2.44 insn per cycle (74.92%)
521,863,142 branches # 502.901 M/sec (75.21%)
425,879 branch-misses # 0.08% of all branches (87.57%)
TopDownL1 # 0.61 retiring (87.67%)
# 0.03 frontend_bound (87.67%)
# 0.02 bad_speculation (87.67%)
# 0.34 backend_bound (74.61%)
1.038138390 seconds time elapsed
0.844849000 seconds user
0.189053000 seconds sys
Metrics in group TopDownL1 don't have event name on arm64 but are not
listed in the $skip_metric list which they should be listed. Add them
to the skip list as what does for x86 platforms in [1].
[1] commit 4d60e83dfc ("perf test: Skip metrics w/o event name in stat STD output linter")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: linuxarm@huawei.com
Cc: kan.liang@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240207091222.54096-1-yangyicong@huawei.com
Currently perf does not record module section addresses except for
the .text section. In general that means perf cannot get module section
mappings correct (except for .text) when loading symbols from a kernel
module file. (Note using --kcore does not have this issue)
Improve that situation slightly by identifying executable sections that
use the same mapping as the .text section. That happens when an
executable section comes directly after the .text section, both in memory
and on file, something that can be determined by following the same layout
rules used by the kernel, refer kernel layout_sections(). Note whether
that happens is somewhat arbitrary, so this is not a final solution.
Example from tracing a virtual machine process:
Before:
$ perf script | grep unknown
CPU 0/KVM 1718 203.511270: 318341 cpu-cycles:P: ffffffffc13e8a70 [unknown] (/lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko)
$ perf script -vvv 2>&1 >/dev/null | grep kvm.intel | grep 'noinstr.text\|ffff'
Map: 0-7e0 41430 [kvm_intel].noinstr.text
Map: ffffffffc13a7000-ffffffffc1421000 a0 /lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko
After:
$ perf script | grep 203.511270
CPU 0/KVM 1718 203.511270: 318341 cpu-cycles:P: ffffffffc13e8a70 vmx_vmexit+0x0 (/lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko)
$ perf script -vvv 2>&1 >/dev/null | grep kvm.intel | grep 'noinstr.text\|ffff'
Map: ffffffffc13a7000-ffffffffc1421000 a0 /lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko
Reported-by: Like Xu <like.xu.linux@gmail.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240208085326.13432-3-adrian.hunter@intel.com
Currently pipe mode doesn't set the file size and it results in a
misleading message of 0 data size at the end. Although it might miss
some accounting for pipe header or more, just displaying the data size
would reduce the possible confusion.
Before:
$ perf record -o- perf test -w noploop | perf report -i- -q --percent-limit=1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ] <====== (here)
99.58% perf perf [.] noploop
After:
$ perf record -o- perf test -w noploop | perf report -i- -q --percent-limit=1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.229 MB - ]
99.46% perf perf [.] noploop
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20240112231340.779469-1-namhyung@kernel.org
With the srcline option, the perf script only prints a source line at
the beginning of a sample with call/ret from functions, but not for
each jump in brstackinsn. It's useful to print a source line for each
jump in brstackinsn when the end user analyze the full assembler
sequences of branch sequences for the sample.
The srccode option can also be used to locate the source code line.
However, it's printed almost for every line and makes the output less
readable.
$perf script -F +brstackinsn,+srcline --xed
Before the patch,
tchain_edit_deb 1463275 15228549.107820: 282495 instructions:u: 401133 f3+0xd (/home/kan/os.li>
tchain_edit.c:22
f3+40: tchain_edit.c:20
000000000040114e jle 0x401133 # PRED 6 cycles [6]
0000000000401133 movl -0x4(%rbp), %eax
0000000000401136 and $0x1, %eax
0000000000401139 test %eax, %eax
000000000040113b jz 0x401143
000000000040113d addl $0x1, -0x4(%rbp)
0000000000401141 jmp 0x401147 # PRED 3 cycles [9] 2.00 IPC
0000000000401147 cmpl $0x3e7, -0x4(%rbp)
000000000040114e jle 0x401133 # PRED 6 cycles [15] 0.33 IPC
After the patch,
tchain_edit_deb 1463275 15228549.107820: 282495 instructions:u: 401133 f3+0xd (/home/kan/os.li>
tchain_edit.c:22
f3+40: tchain_edit.c:20
000000000040114e jle 0x401133 srcline: tchain_edit.c:20 # PRED 6 cycles [6]
0000000000401133 movl -0x4(%rbp), %eax
0000000000401136 and $0x1, %eax
0000000000401139 test %eax, %eax
000000000040113b jz 0x401143
000000000040113d addl $0x1, -0x4(%rbp)
0000000000401141 jmp 0x401147 srcline: tchain_edit.c:23 # PRED 3 cycles [9] 2.00 IPC
0000000000401147 cmpl $0x3e7, -0x4(%rbp)
000000000040114e jle 0x401133 srcline: tchain_edit.c:20 # PRED 6 cycles [15] 0.33 IPC
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: ahmad.yasin@intel.com
Cc: amiri.khalil@intel.com
Cc: ak@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240205145819.1943114-1-kan.liang@linux.intel.com
Updates to struct parse_events_error needed to be carried through to
PowerPC specific event parsing.
Fixes: fd7b8e8fb2 ("perf parse-events: Print all errors")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung <namhyung@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240206235902.2917395-1-irogers@google.com
perf script exposes the evsel_name to python scripts as part of the data
passed to the sample or tracepoint handler function, and it passes the id and
stream_id to the throttled/unthrottled handler functions. This makes matching
throttle events and samples difficult.
To make this possible, this change exposes the sample id and stream_id values
to the script.
Signed-off-by: Ben Gainey <ben.gainey@arm.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: will@kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240123103137.1890779-2-ben.gainey@arm.com
When building perf with BPF skels we either copy the minimalistic
tools/perf/util/bpf_skel/vmlinux/vmlinux.h or use bpftool to generate a
vmlinux from BTF, storing the result in $(SKEL_OUT)/vmlinux.h.
We need to remove that when doing a 'make -C tools/perf clean', fix it.
Fixes: b7a2d774c9 ("perf build: Add ability to build with a generated vmlinux.h")
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: bpf@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/Zbz89KK5wHfZ82jv@x1
Prior to this patch '0' would be dropped as the config values default
to 0. Some json values are hex and the string '0' wouldn't match '0x0'
as zero. Add a more robust is_zero test to drop these event terms.
When encoding numbers as hex, if the number is between 0 and 9
inclusive then don't add a 0x prefix.
Update test expectations for these changes.
On x86 this reduces the event/metric C string by 58,411 bytes.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240131201429.792138-1-irogers@google.com
Prior to this patch the first and the last error encountered during
parsing are printed. To see other errors verbose needs
enabling. Unfortunately this can drop useful errors, in particular on
terms. This patch changes the errors so that instead of the first and
last all errors are recorded and printed, the underlying data
structure is changed to a list.
Before:
```
$ perf stat -e 'slots/edge=2/' true
event syntax error: 'slots/edge=2/'
\___ Bad event or PMU
Unable to find PMU or event on a PMU of 'slots'
Initial error:
event syntax error: 'slots/edge=2/'
\___ Cannot find PMU `slots'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
```
After:
```
$ perf stat -e 'slots/edge=2/' true
event syntax error: 'slots/edge=2/'
\___ Bad event or PMU
Unable to find PMU or event on a PMU of 'slots'
event syntax error: 'slots/edge=2/'
\___ value too big for format (edge), maximum is 1
event syntax error: 'slots/edge=2/'
\___ Cannot find PMU `slots'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
```
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: tchen168@asu.edu
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240131134940.593788-3-irogers@google.com
A PMU event/alias will have a set of format terms that replace it when
an event is parsed. The location of the terms is their position when
parsed for the event/alias either from sysfs or json. This location is
of little use when an event fails to parse as the error will be given
in terms of the location in the string of events parsed not the json
or sysfs string. Fix this by making the cloned terms location that of
the event/alias.
If a cloned term from an event/alias is invalid the bad format is hard
to determine from the error string. Add the name of the bad format
into the error string.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: tchen168@asu.edu
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240131134940.593788-2-irogers@google.com
It is assumed that debug statements always print a newline, fix two
missing ones.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: tchen168@asu.edu
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240131134940.593788-1-irogers@google.com
Add some (hopefully useful) hints to tips.txt
Also some minor corrections.
Would probably good to make it a reviewer rule that if generally useful
options are added the patch must add an example to tips.txt
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240131021352.151440-1-ak@linux.intel.com
The original test report was too complicated to read with information
that not really useful. This new update simplify the report which should
largely improve the readibility.
Signed-off-by: Weilin Wang <weilin.wang@intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240130180907.639729-1-weilin.wang@intel.com
data->id has been initialized at line 2362, remove duplicate initialization.
Fixes: 3ad31d8a0d ("perf evsel: Centralize perf_sample initialization")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240127025756.4041808-1-yangjihong1@huawei.com
Since get_states() assumes the existence of libtraceevent, so move
to where it should belong, i.e, util/trace-event-parse.c, and also
rename it to parse_task_states().
Leave evsel_getstate() untouched as it fits well in the evsel
category.
Also make some necessary tweaks for python support, and get it
verified with: perf test python.
Signed-off-by: Ze Gao <zegao@tencent.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240123070210.1669843-2-zegao@tencent.com
The 'Session topology' test currently fails with this message when
evlist__new_default() opens more than one event:
32: Session topology :
--- start ---
templ file: /tmp/perf-test-vv5YzZ
Using CPUID 0x00000000410fd070
Opening: unknown-hardware:HG
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xb00000000
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 4
Opening: unknown-hardware:HG
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xa00000000
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 5
non matching sample_type
FAILED tests/topology.c:73 can't get session
---- end ----
Session topology: FAILED!
This is because when re-opening the file and parsing the header, Perf
expects that any file that has more than one event has the sample ID
flag set. Perf record already sets the flag in a similar way when there
is more than one event, so add the same logic to evlist__new_default().
evlist__new_default() is only currently used in tests, so I don't
expect this change to have any other side effects. The other tests that
use it don't save and re-open the file so don't hit this issue.
The session topology test has been failing on Arm big.LITTLE platforms
since commit 251aa04024 ("perf parse-events: Wildcard most
"numeric" events") when evlist__new_default() started opening multiple
events for 'cycles'.
Fixes: 251aa04024 ("perf parse-events: Wildcard most "numeric" events")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
[ This was failing as well on a Rocket Lake Refresh/14700k Intel hybrid system - Arnaldo ]
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Closes: https://lore.kernel.org/lkml/CAP-5=fWVQ-7ijjK3-w1q+k2WYVNHbAcejb-xY0ptbjRw476VKA@mail.gmail.com/
Link: https://lore.kernel.org/r/20240124094358.489372-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is to get the changes from:
94ea9c0521 ("x86/headers: Replace #include <asm/export.h> with #include <linux/export.h>")
10f4c9b9a3 ("x86/asm: Fix build of UML with KASAN")
That addresses these perf tools build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/lkml/ZbkIKpKdNqOFdMwJ@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As events are deduplicated by name, ensure PMU prefixes are always
used in metrics. Previously they may be missed on the first event in a
formula.
Update metric constraints for architectures with topdown l2 events.
Conversion script updated in:
https://github.com/intel/perfmon/pull/128
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Closes: https://lore.kernel.org/lkml/ZZam-EG-UepcXtWw@kernel.org/
Link: https://lore.kernel.org/r/20240104231903.775717-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
the definition of calloc is as follows:
void *calloc(size_t nmemb, size_t size);
number of members is in the first parameter and the size is in the
second parameter.
Fix error messages on gcc 14 20240102:
error: 'calloc' sizes specified with 'sizeof' in the earlier argument and
not in the later argument [-Werror=calloc-transposed-args]
Committer notes:
I noticed this on fedora 40 and rawhide.
Signed-off-by: Sun Haiyong <sunhaiyong@loongson.cn>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240106094129.3337057-1-siyanteng@loongson.cn
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
GCC 14 introduces a new -Walloc-size included in -Wextra which errors out
like:
builtin-top.c: In function ‘prompt_integer’:
builtin-top.c:360:21: error: allocation of insufficient size ‘0’ for
type ‘char’ with size ‘1’ [-Werror=alloc-size]
360 | char *buf = malloc(0), *p;
| ^~~~~~
Just set it to NULL, getline() will do the allocation.
Signed-off-by: Sun Haiyong <sunhaiyong@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231204082055.91877-1-siyanteng@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf build failed due to the shellcheck on my machine (v0.4.6 on Ubuntu
18.04.1 LTS) doesn't support -a/--check-sourced and -S/--severity option.
These two options are introduced in shellcheck v0.4.7 and v0.6.0
respectively. So restrict the minimal version of shellcheck to v0.6.0.
Fixes: b809fc656e ("perf build: Shellcheck support for OUTPUT directory")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/20240122080406.28678-1-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The daemon signal test sends signals and then expects files to be
written. It was observed on an Intel Alderlake that the signals were
sent too quickly leading to the 3 expected files not appearing.
To avoid this send the next signal only after the expected previous file
has appeared. To avoid an infinite loop the number of retries is
limited.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Shirisha G <shirisha@linux.ibm.com>
Link: https://lore.kernel.org/r/20240124043015.1388867-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
"grep -cv" can exit with an error code that causes the "set -e" to abort
the script. Switch to using the grep exit code in the if condition to
avoid this.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Shirisha G <shirisha@linux.ibm.com>
Link: https://lore.kernel.org/r/20240124043015.1388867-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Write the JSON output to a specific file to avoid debug output
breaking it.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Shirisha G <shirisha@linux.ibm.com>
Link: https://lore.kernel.org/r/20240124043015.1388867-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an option to write the 'perf list' output to a specific file. This
can avoid issues with debug output being written into the output stream.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Shirisha G <shirisha@linux.ibm.com>
Link: https://lore.kernel.org/r/20240124043015.1388867-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using printf() can interrupt 'perf list output', use pr_err() which can
respect debug settings and the debug file.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Shirisha G <shirisha@linux.ibm.com>
Link: https://lore.kernel.org/r/20240124043015.1388867-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In linux next repo, test case 'perf script tests' fails on s390.
The root case is a command line invocation of 'perf record' with
call-graph information. On s390 only DWARF formatted call-graphs are
supported and only on software events.
Change the command line parameters for s390.
Output before:
# perf test 89
89: perf script tests : FAILED!
#
Output after:
# perf test 89
89: perf script tests : Ok
#
Fixes: 0dd5041c9a ("perf addr_location: Add init/exit/copy functions")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20240125100351.936262-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
98d2b43081 ("add unique mount ID")
That add STATX_MNT_ID_UNIQUE that was manually added to
tools/perf/trace/beauty/statx.c, at some point this should move to the
shell based automated way.
This silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/stat.h include/uapi/linux/stat.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZbJq08s19890WDo-@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I found the hierarchy mode useful, but it's easy to make a typo when
using it. Let's add a short option for that.
Also update the documentation. :)
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20240125055124.1579617-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The msr PMU is a software one, meaning msr events may be grouped
with events in a hardware context. As the msr PMU isn't marked as a
software PMU by perf_pmu__is_software, groups with the msr PMU in
are broken and the msr events placed in a different group. This
may lead to multiplexing errors where a hardware event isn't
counted while the msr event, such as tsc, is. Fix all of this by
marking the msr PMU as software, which agrees with the driver.
Before:
```
$ perf stat -e '{slots,tsc}' -a true
WARNING: events were regrouped to match PMUs
Performance counter stats for 'system wide':
1,750,335 slots
4,243,557 tsc
0.001456717 seconds time elapsed
```
After:
```
$ perf stat -e '{slots,tsc}' -a true
Performance counter stats for 'system wide':
12,526,380 slots
3,415,163 tsc
0.001488360 seconds time elapsed
```
Fixes: 251aa04024 ("perf parse-events: Wildcard most "numeric" events")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20240124234200.1510417-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Even though this is a frame pointer unwind test, it's testing that a
frame pointer stack can be augmented correctly with a partial
Dwarf unwind. So add a feature check so that this test skips instead of
fails if Dwarf unwinding isn't present.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Spoorthy S <spoorts2@in.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Link: https://lore.kernel.org/r/20240123163903.350306-3-james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Even though unwinding depends on either HAVE_DWARF_SUPPORT or
HAVE_LIBUNWIND, scripts testing unwinding can't just look for the
existence of either of those flags. This is because
NO_LIBDW_DWARF_UNWIND=1 can disable unwinding with libdw, but libdw will
still be linked leaving HAVE_DWARF_SUPPORT turned on. Presumably because
it is used for things other than unwinding, so I don't think this needs
to be fixed.
HAVE_DWARF_UNWIND_SUPPORT already takes the combination of all those
things into account, and is used to gate the built in tests like "Test
dwarf unwind", so add it to the feature list output so that it can be
used by the script tests too.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Spoorthy S <spoorts2@in.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20240123163903.350306-2-james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The 'Session topology' test currently fails with this message when
evlist__new_default() opens more than one event:
32: Session topology :
--- start ---
templ file: /tmp/perf-test-vv5YzZ
Using CPUID 0x00000000410fd070
Opening: unknown-hardware:HG
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xb00000000
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 4
Opening: unknown-hardware:HG
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xa00000000
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 5
non matching sample_type
FAILED tests/topology.c:73 can't get session
---- end ----
Session topology: FAILED!
This is because when re-opening the file and parsing the header, Perf
expects that any file that has more than one event has the sample ID
flag set. Perf record already sets the flag in a similar way when there
is more than one event, so add the same logic to evlist__new_default().
evlist__new_default() is only currently used in tests, so I don't
expect this change to have any other side effects. The other tests that
use it don't save and re-open the file so don't hit this issue.
The session topology test has been failing on Arm big.LITTLE platforms
since commit 251aa04024 ("perf parse-events: Wildcard most
"numeric" events") when evlist__new_default() started opening multiple
events for 'cycles'.
Fixes: 251aa04024 ("perf parse-events: Wildcard most "numeric" events")
Closes: https://lore.kernel.org/lkml/CAP-5=fWVQ-7ijjK3-w1q+k2WYVNHbAcejb-xY0ptbjRw476VKA@mail.gmail.com/
Tested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20240124094358.489372-1-james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The mem_events can be retrieved from the struct perf_pmu now. An ARCH
specific perf_mem_events__ptr() is not required anymore. Remove all of
them.
The Intel hybrid has multiple mem-events-supported PMUs. But they share
the same mem_events. Other ARCHs only support one mem-events-supported
PMU. In the configuration, it's good enough to only configure the
mem_events for one PMU. Add perf_mem_events_find_pmu() which returns the
first mem-events-supported PMU.
In the perf_mem_events__init(), the perf_pmus__scan() is not required
anymore. It avoids checking the sysfs for every PMU on the system.
Make the perf_mem_events__record_args() more generic. Remove the
perf_mem_events__print_unsupport_hybrid().
Since pmu is added as a new parameter, rename perf_mem_events__ptr() to
perf_pmu__mem_events_ptr(). Several other functions also do a similar
rename.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Tested-by: Kajol jain <kjain@linux.ibm.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: james.clark@arm.com
Cc: will@kernel.org
Cc: leo.yan@linaro.org
Cc: mike.leach@linaro.org
Cc: renyu.zj@linux.alibaba.com
Cc: yuhaixin.yhx@linux.alibaba.com
Cc: tmricht@linux.ibm.com
Cc: atrajeev@linux.vnet.ibm.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: john.g.garry@oracle.com
Link: https://lore.kernel.org/r/20240123185036.3461837-3-kan.liang@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Now that we have evsel__taskstate() which no longer relies on the
hardcoded task state string and has good backward compatibility,
we have a good reason to use it.
Note TASK_STATE_TO_CHAR_STR and task bitmasks are useless now so
we remove them for good. And now we pass the state info back and
forth in a symbolic char which explains itself well instead.
Signed-off-by: Ze Gao <zegao@tencent.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20240123022425.1611483-1-zegao@tencent.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Now that we have the __prinf_flags() parsing routines, we add a new
helper evsel__taskstate() to extract the task state info from the
recorded data.
Signed-off-by: Ze Gao <zegao@tencent.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20240122070859.1394479-5-zegao@tencent.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Perf uses a hard coded string "RSDTtXZPI" to index the sched_switch
prev_state field raw bitmask value. This works well except for when
the kernel changes this string, in which case this will break again.
Instead we add a new way to parse task state string from tracepoint
print format already recorded by perf, which eliminates the further
dependencies with this hardcode and unmaintainable macro, and this
is exactly what libtraceevent[1] does for now.
So we borrow the print flags parsing logic from libtraceevent[1].
And in get_states(), we walk the print arguments until the
__print_flags() for the target state field is found, and use that to
build the states string for future parsing.
[1]: https://lore.kernel.org/linux-trace-devel/20231224140732.7d41698d@rorschach.local.home/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Ze Gao <zegao@tencent.com>
Link: https://lore.kernel.org/r/20240122070859.1394479-4-zegao@tencent.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Update state char array to match the latest kernel definitions and
remove unused state mapping macros.
Note this is the preparing patch for get rid of the way to parse
process state from raw bitmask value. Instead we are going to
parse it from the recorded tracepoint print format, and this change
marks why we're doing it.
Signed-off-by: Ze Gao <zegao@tencent.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20240122070859.1394479-3-zegao@tencent.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Minor code style alignment cleanup for perf_data__switch() and
perf_data__write().
No functional change.
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240119040304.3708522-4-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
In pipe mode, no need to switch perf data output, therefore,
'--timestamp-filename' option should not take effect.
Check the conflict before recording and output WARNING.
In this case, the check pipe mode in perf_data__switch() can be removed.
Before:
# perf record --timestamp-filename -o- perf test -w noploop | perf report -i- --percent-limit=1
# To display the perf.data header info, please use --header/--header-only options.
#
[ perf record: Woken up 1 times to write data ]
[ perf record: Dump -.2024011812110182 ]
#
# Total Lost Samples: 0
#
# Samples: 4K of event 'cycles:P'
# Event count (approx.): 2176784359
#
# Overhead Command Shared Object Symbol
# ........ ....... .................... ......................................
#
97.83% perf perf [.] noploop
#
# (Tip: Print event counts in CSV format with: perf stat -x,)
#
After:
# perf record --timestamp-filename -o- perf test -w noploop | perf report -i- --percent-limit=1
WARNING: --timestamp-filename option is not available in pipe mode.
# To display the perf.data header info, please use --header/--header-only options.
#
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
#
# Total Lost Samples: 0
#
# Samples: 4K of event 'cycles:P'
# Event count (approx.): 2185575421
#
# Overhead Command Shared Object Symbol
# ........ ....... ..................... .............................................
#
97.75% perf perf [.] noploop
#
# (Tip: Profiling branch (mis)predictions with: perf record -b / perf report)
#
Fixes: ecfd7a9c04 ("perf record: Add '--timestamp-filename' option to append timestamp to output file name")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240119040304.3708522-3-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
perf_data__switch() may not assign a legal value to 'new_filename'.
In this case, 'new_filename' uses the on-stack value, which may cause a
incorrect free and unexpected result.
Fixes: 03724b2e9c ("perf record: Allow to limit number of reported perf.data files")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240119040304.3708522-2-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The DWARF location expression can be fairly complex and it'd be hard
to match it with the condition correctly. So let's be conservative
and only allow simple expressions. For now it just checks the first
operation in the list. The following operations looks ok:
* DW_OP_stack_value
* DW_OP_deref_size
* DW_OP_deref
* DW_OP_piece
To refuse complex (and unsupported) location expressions, add
check_allowed_ops() to compare the rest of the list. It seems earlier
result contained those unsupported expressions. For example, I found
some local struct variable is placed like below.
<2><43d1517>: Abbrev Number: 62 (DW_TAG_variable)
<43d1518> DW_AT_location : 15 byte block: 91 50 93 8 91 78 93 4 93 84 8 91 68 93 4
(DW_OP_fbreg: -48; DW_OP_piece: 8;
DW_OP_fbreg: -8; DW_OP_piece: 4;
DW_OP_piece: 1028;
DW_OP_fbreg: -24; DW_OP_piece: 4)
Another example is something like this.
0057c8be ffffffffffffffff ffffffff812109f0 (base address)
0057c8ce ffffffff812112b5 ffffffff812112c8 (DW_OP_breg3 (rbx): 0;
DW_OP_constu: 18446744073709551612;
DW_OP_and;
DW_OP_stack_value)
It should refuse them. After the change, the stat shows:
Annotate data type stats:
total 294, ok 158 (53.7%), bad 136 (46.3%)
-----------------------------------------------------------
30 : no_sym
32 : no_mem_ops
53 : no_var
14 : no_typeinfo
7 : bad_offset
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240117062657.985479-10-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Local variables are allocated in the stack and the location list
should look like base register(s) and an offset. Extend the
die_find_variable_by_reg() to handle the following expressions
* DW_OP_breg{0..31}
* DW_OP_bregx
* DW_OP_fbreg
Ususally DWARF subprogram entries have frame base information and
use it to locate stack variable like below:
<2><43d1575>: Abbrev Number: 62 (DW_TAG_variable)
<43d1576> DW_AT_location : 2 byte block: 91 7c (DW_OP_fbreg: -4) <--- here
<43d1579> DW_AT_name : (indirect string, offset: 0x2c00c9): i
<43d157d> DW_AT_decl_file : 1
<43d157e> DW_AT_decl_line : 78
<43d157f> DW_AT_type : <0x43d19d7>
I found some differences on saving the frame base between gcc and clang.
The gcc uses the CFA to get the base so it needs to check the current
frame's CFI info. In this case, stack offset needs to be adjusted from
the start of the CFA.
<1><1bb8d>: Abbrev Number: 102 (DW_TAG_subprogram)
<1bb8e> DW_AT_name : (indirect string, offset: 0x74d41): kernel_init
<1bb92> DW_AT_decl_file : 2
<1bb92> DW_AT_decl_line : 1440
<1bb94> DW_AT_decl_column : 18
<1bb95> DW_AT_prototyped : 1
<1bb95> DW_AT_type : <0xcc>
<1bb99> DW_AT_low_pc : 0xffffffff81bab9e0
<1bba1> DW_AT_high_pc : 0x1b2
<1bba9> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <------ here
<1bbab> DW_AT_call_all_calls: 1
<1bbab> DW_AT_sibling : <0x1bf5a>
While clang sets it to a register directly and it can check the register
and offset in the instruction directly.
<1><43d1542>: Abbrev Number: 60 (DW_TAG_subprogram)
<43d1543> DW_AT_low_pc : 0xffffffff816a7c60
<43d154b> DW_AT_high_pc : 0x98
<43d154f> DW_AT_frame_base : 1 byte block: 56 (DW_OP_reg6 (rbp)) <---------- here
<43d1551> DW_AT_GNU_all_call_sites: 1
<43d1551> DW_AT_name : (indirect string, offset: 0x3bce91): foo
<43d1555> DW_AT_decl_file : 1
<43d1556> DW_AT_decl_line : 75
<43d1557> DW_AT_prototyped : 1
<43d1557> DW_AT_type : <0x43c7332>
<43d155b> DW_AT_external : 1
Also it needs to update the offset after finding the type like global
variables since the offset was from the frame base. Factor out
match_var_offset() to check global and local variables in the same way.
The type stats are improved too:
Annotate data type stats:
total 294, ok 160 (54.4%), bad 134 (45.6%)
-----------------------------------------------------------
30 : no_sym
32 : no_mem_ops
51 : no_var
14 : no_typeinfo
7 : bad_offset
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-9-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The die_get_cfa() is to get frame base register and offset at the given
instruction address (pc). This info will be used to locate stack
variables which have location expression using DW_OP_fbreg.
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-8-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Global variables are accessed using PC-relative address so it needs to
be handled separately. The PC-rel addressing is detected by using
DWARF_REG_PC. On x86, %rip register would be used.
The address can be calculated using the ip and offset in the
instruction. But it should start from the next instruction so add
calculate_pcrel_addr() to do it properly.
But global variables defined in a different file would only have a
declaration which doesn't include a location list. So it first tries
to get the type info using the address, and then looks up the variable
declarations using name. The name of global variables should be get
from the symbol table. The declaration would have the type info.
So extend find_var_type() to take both address and name for global
variables.
The stat is now looks like:
Annotate data type stats:
total 294, ok 153 (52.0%), bad 141 (48.0%)
-----------------------------------------------------------
30 : no_sym
32 : no_mem_ops
61 : no_var
10 : no_typeinfo
8 : bad_offset
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-7-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Extend find_data_type_die() to find data type from PC-relative address
using die_find_variable_by_addr(). Users need to pass the address for
the (global) variable.
The offset for the variable should be updated after finding the type
because the offset in the instruction is just to calcuate the address
for the variable. So it changed to pass a pointer to offset and renamed
it to 'poffset'.
First it searches variables in the CU DIE as it's likely that the global
variables are defined in the file level. And then it iterates the scope
DIEs to find a local (static) variable.
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-6-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
A typical function prologue and epilogue include multiple stack
operations to save and restore the current value of registers.
On x86, it looks like below:
push r15
push r14
push r13
push r12
...
pop r12
pop r13
pop r14
pop r15
ret
As these all touches the stack memory region, chances are high that they
appear in a memory profile data. But these are not used for any real
purpose yet so it'd return no types.
One of my profile type shows that non neglible portion of data came from
the stack operations. It also seems GCC generates more stack operations
than clang.
Annotate Instruction stats
total 264, ok 169 (64.0%), bad 95 (36.0%)
Name : Good Bad
-----------------------------------------------------------
movq : 49 27
movl : 24 9
popq : 0 19 <-- here
cmpl : 17 2
addq : 14 1
cmpq : 12 2
cmpxchgl : 3 7
Instead of dealing them as unknown, let's create a seperate pseudo type
to represent those stack operations separately.
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-5-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
On x86, instructions for array access often looks like below.
mov 0x1234(%rax,%rbx,8), %rcx
Usually the first register holds the type information and the second one
has the index. And the current code only looks up a variable for the
first register. But it's possible to be in the other way around so it
needs to check the second register if the first one failed.
The stat changed like this.
Annotate data type stats:
total 294, ok 148 (50.3%), bad 146 (49.7%)
-----------------------------------------------------------
30 : no_sym
32 : no_mem_ops
66 : no_var
10 : no_typeinfo
8 : bad_offset
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-4-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When a sample was come from a conditional branch without a memory
operand, it could be due to a macro fusion with a previous instruction.
So it needs to check the memory operand in the previous one.
This improves the stat like below:
Annotate data type stats:
total 294, ok 147 (50.0%), bad 147 (50.0%)
-----------------------------------------------------------
30 : no_sym
32 : no_mem_ops
71 : no_var
6 : no_typeinfo
8 : bad_offset
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-3-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
For the performance reason, I prefer llvm-objdump over GNU's. But I
found that llvm-objdump puts x86 lock prefix in a separate line like
below.
ffffffff81000695: f0 lock
ffffffff81000696: ff 83 54 0b 00 00 incl 2900(%rbx)
This should be parsed properly, but I just changed to find the insn
with next offset for now.
This improves the statistics as it can process more instructions.
Annotate data type stats:
total 294, ok 144 (49.0%), bad 150 (51.0%)
-----------------------------------------------------------
30 : no_sym
35 : no_mem_ops
71 : no_var
6 : no_typeinfo
8 : bad_offset
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-2-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
If pkg-config is not installed when libtraceevent is linked, the build fails.
The error information is as follows:
$ make
<SNIP>
In file included from /home/yjh/projects_linux/perf-tool-next/linux/tools/perf/util/evsel.c:43:
/home/yjh/projects_linux/perf-tool-next/linux/tools/perf/util/trace-event.h:149:62: error: operator '&&' has no right operand
149 | #if defined(LIBTRACEEVENT_VERSION) && LIBTRACEEVENT_VERSION >= MAKE_LIBTRACEEVENT_VERSION(1, 5, 0)
| ^~
error: command '/usr/bin/gcc' failed with exit code 1
cp: cannot stat 'python_ext_build/lib/perf*.so': No such file or directory
make[2]: *** [Makefile.perf:668: python/perf.cpython-310-x86_64-linux-gnu.so] Error 1
make[2]: *** Waiting for unfinished jobs....
Because pkg-config is not installed, fail to get libtraceevent version in
Makefile.config file. As a result, LIBTRACEEVENT_VERSION is empty.
However, the preceding error information is not user-friendly.
Identify errors in advance by checking that pkg-config is installed at
compile time.
The build results of various scenarios are as follows:
1. build successful when libtraceevent is not linked and pkg-config is not installed
$ pkg-config --version
-bash: /usr/bin/pkg-config: No such file or directory
$ make clean >/dev/null
$ make NO_LIBTRACEEVENT=1 >/dev/null
Makefile.config:1133: No alternatives command found, you need to set JDIR= to point to the root of your Java directory
PERF_VERSION = 6.7.rc6.gd988c9f511af
$ echo $?
0
2. dummy pkg-config is missing when libtraceevent is linked
$ pkg-config --version
-bash: /usr/bin/pkg-config: No such file or directory
$ make clean >/dev/null
$ make >/dev/null
Makefile.config:221: *** Error: pkg-config needed by libtraceevent is missing on this system, please install it. Stop.
make[1]: *** [Makefile.perf:251: sub-make] Error 2
make: *** [Makefile:70: all] Error 2
$ echo $?
2
3. build successful when libtraceevent is linked and pkg-config is installed
$ pkg-config --version
0.29.2
$ make clean >/dev/null
$ make >/dev/null
Makefile.config:1133: No alternatives command found, you need to set JDIR= to point to the root of your Java directory
PERF_VERSION = 6.7.rc6.gd988c9f511af
$ echo $?
0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240112034019.3558584-1-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
This test case often fails on s390 (about 2 out of 10) because the
10% percent limit on the difference between --bpf-counters event counting
and s390 hardware counting is more than 10% in all failure cases.
Raise the limit to 20% on s390 and the test case succeeds.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Cc: svens@linux.ibm.com
Link: https://lore.kernel.org/r/20240108084009.3959211-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
- Add Namhyung Kim as tools/perf/ co-maintainer, we're taking turns processing
patches, switching roles from perf-tools to perf-tools-next at each Linux
release.
Data profiling:
- Associate samples that identify loads and stores with data structures. This
uses events available on Intel, AMD and others and DWARF info:
# To get memory access samples in kernel for 1 second (on Intel)
$ perf mem record -a -K --ldlat=4 -- sleep 1
# Similar for the AMD (but it requires 6.3+ kernel for BPF filters)
$ perf mem record -a --filter 'mem_op == load || mem_op == store, ip > 0x8000000000000000' -- sleep 1
Then, amongst several modes of post processing, one can do things like:
$ perf report -s type,typeoff --hierarchy --group --stdio
...
#
# Samples: 10K of events 'cpu/mem-loads,ldlat=4/P, cpu/mem-stores/P, dummy:u'
# Event count (approx.): 602758064
#
# Overhead Data Type / Data Type Offset
# ........................... ............................
#
26.09% 3.28% 0.00% long unsigned int
26.09% 3.28% 0.00% long unsigned int +0 (no field)
18.48% 0.73% 0.00% struct page
10.83% 0.02% 0.00% struct page +8 (lru.next)
3.90% 0.28% 0.00% struct page +0 (flags)
3.45% 0.06% 0.00% struct page +24 (mapping)
0.25% 0.28% 0.00% struct page +48 (_mapcount.counter)
0.02% 0.06% 0.00% struct page +32 (index)
0.02% 0.00% 0.00% struct page +52 (_refcount.counter)
0.02% 0.01% 0.00% struct page +56 (memcg_data)
0.00% 0.01% 0.00% struct page +16 (lru.prev)
15.37% 17.54% 0.00% (stack operation)
15.37% 17.54% 0.00% (stack operation) +0 (no field)
11.71% 50.27% 0.00% (unknown)
11.71% 50.27% 0.00% (unknown) +0 (no field)
$ perf annotate --data-type
...
Annotate type: 'struct cfs_rq' in [kernel.kallsyms] (13 samples):
============================================================================
samples offset size field
13 0 640 struct cfs_rq {
2 0 16 struct load_weight load {
2 0 8 unsigned long weight;
0 8 4 u32 inv_weight;
};
0 16 8 unsigned long runnable_weight;
0 24 4 unsigned int nr_running;
1 28 4 unsigned int h_nr_running;
...
$ perf annotate --data-type=page --group
Annotate type: 'struct page' in [kernel.kallsyms] (480 samples):
event[0] = cpu/mem-loads,ldlat=4/P
event[1] = cpu/mem-stores/P
event[2] = dummy:u
===================================================================================
samples offset size field
447 33 0 0 64 struct page {
108 8 0 0 8 long unsigned int flags;
319 13 0 8 40 union {
319 13 0 8 40 struct {
236 2 0 8 16 union {
236 2 0 8 16 struct list_head lru {
236 1 0 8 8 struct list_head* next;
0 1 0 16 8 struct list_head* prev;
};
236 2 0 8 16 struct {
236 1 0 8 8 void* __filler;
0 1 0 16 4 unsigned int mlock_count;
};
236 2 0 8 16 struct list_head buddy_list {
236 1 0 8 8 struct list_head* next;
0 1 0 16 8 struct list_head* prev;
};
236 2 0 8 16 struct list_head pcp_list {
236 1 0 8 8 struct list_head* next;
0 1 0 16 8 struct list_head* prev;
};
};
82 4 0 24 8 struct address_space* mapping;
1 7 0 32 8 union {
1 7 0 32 8 long unsigned int index;
1 7 0 32 8 long unsigned int share;
};
0 0 0 40 8 long unsigned int private;
};
This uses the existing annotate code, calling objdump to do the disassembly,
with improvements to avoid having this take too long, but longer term a
switch to a disassembler library, possibly reusing code in the kernel will
be pursued.
This is the initial implementation, please use it and report impressions and
bugs. Make sure the kernel-debuginfo packages match the running kernel. The
'perf report' phase for non short perf.data files may take a while.
There is a great article about it on LWN:
https://lwn.net/Articles/955709/ - "Data-type profiling for perf"
One last test I did while writing this text, on a AMD Ryzen 5950X, using a distro
kernel, while doing a simple 'find /' on an otherwise idle system resulted in:
# uname -r
6.6.9-100.fc38.x86_64
# perf -vv | grep BPF_
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
bpf_skeletons: [ on ] # HAVE_BPF_SKEL
# rpm -qa | grep kernel-debuginfo
kernel-debuginfo-common-x86_64-6.6.9-100.fc38.x86_64
kernel-debuginfo-6.6.9-100.fc38.x86_64
#
# perf mem record -a --filter 'mem_op == load || mem_op == store, ip > 0x8000000000000000'
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 2.199 MB perf.data (2913 samples) ]
#
# ls -la perf.data
-rw-------. 1 root root 2346486 Jan 9 18:36 perf.data
# perf evlist
ibs_op//
dummy:u
# perf evlist -v
ibs_op//: type: 11, size: 136, config: 0, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ADDR|CPU|PERIOD|IDENTIFIER|DATA_SRC|WEIGHT, read_format: ID, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1
dummy:u: type: 1 (PERF_TYPE_SOFTWARE), size: 136, config: 0x9 (PERF_COUNT_SW_DUMMY), { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ADDR|CPU|IDENTIFIER|DATA_SRC|WEIGHT, read_format: ID, inherit: 1, exclude_kernel: 1, exclude_hv: 1, mmap: 1, comm: 1, task: 1, mmap_data: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
#
# perf report -s type,typeoff --hierarchy --group --stdio
# Total Lost Samples: 0
#
# Samples: 2K of events 'ibs_op//, dummy:u'
# Event count (approx.): 1904553038
#
# Overhead Data Type / Data Type Offset
# ................... ............................
#
73.70% 0.00% (unknown)
73.70% 0.00% (unknown) +0 (no field)
3.01% 0.00% long unsigned int
3.00% 0.00% long unsigned int +0 (no field)
0.01% 0.00% long unsigned int +2 (no field)
2.73% 0.00% struct task_struct
1.71% 0.00% struct task_struct +52 (on_cpu)
0.38% 0.00% struct task_struct +2104 (rcu_read_unlock_special.b.blocked)
0.23% 0.00% struct task_struct +2100 (rcu_read_lock_nesting)
0.14% 0.00% struct task_struct +2384 ()
0.06% 0.00% struct task_struct +3096 (signal)
0.05% 0.00% struct task_struct +3616 (cgroups)
0.05% 0.00% struct task_struct +2344 (active_mm)
0.02% 0.00% struct task_struct +46 (flags)
0.02% 0.00% struct task_struct +2096 (migration_disabled)
0.01% 0.00% struct task_struct +24 (__state)
0.01% 0.00% struct task_struct +3956 (mm_cid_active)
0.01% 0.00% struct task_struct +1048 (cpus_ptr)
0.01% 0.00% struct task_struct +184 (se.group_node.next)
0.01% 0.00% struct task_struct +20 (thread_info.cpu)
0.00% 0.00% struct task_struct +104 (on_rq)
0.00% 0.00% struct task_struct +2456 (pid)
1.36% 0.00% struct module
0.59% 0.00% struct module +952 (kallsyms)
0.42% 0.00% struct module +0 (state)
0.23% 0.00% struct module +8 (list.next)
0.12% 0.00% struct module +216 (syms)
0.95% 0.00% struct inode
0.41% 0.00% struct inode +40 (i_sb)
0.22% 0.00% struct inode +0 (i_mode)
0.06% 0.00% struct inode +76 (i_rdev)
0.06% 0.00% struct inode +56 (i_security)
<SNIP>
perf top/report:
- Don't ignore job control, allowing control+Z + bg to work.
- Add s390 raw data interpretation for PAI (Processor Activity Instrumentation)
counters.
perf archive:
- Add new option '--all' to pack perf.data with DSOs.
- Add new option '--unpack' to expand tarballs.
Initialization speedups:
- Lazily initialize zstd streams to save memory when not using it.
- Lazily allocate/size mmap event copy.
- Lazy load kernel symbols in 'perf record'.
- Be lazier in allocating lost samples buffer in 'perf record'.
- Don't synthesize BPF events when disabled via the command line (perf record --no-bpf-event).
Assorted improvements:
- Show note on AMD systems that the :p, :pp, :ppp and :P are all the same, as
IBS (Instruction Based Sampling) is used and it is inherentely precise, not
having levels of precision like in Intel systems.
- When 'cycles' isn't available, fall back to the "task-clock" event when not
system wide, not to 'cpu-clock'.
- Add --debug-file option to redirect debug output, e.g.:
$ perf --debug-file /tmp/perf.log record -v true
- Shrink 'struct map' to under one cacheline by avoiding function pointers for
selecting if addresses are identity or DSO relative, and using just a byte for
some boolean struct members.
- Resolve the arch specific strerrno just once to use in perf_env__arch_strerrno().
- Reduce memory for recording PERF_RECORD_LOST_SAMPLES event.
Assorted fixes:
- Fix the default 'perf top' usage on Intel hybrid systems, now it starts with
a browser showing the number of samples for Efficiency (cpu_atom/cycles/P) and
Performance (cpu_core/cycles/P). This behaviour is similar on ARM64, with its
respective set of big.LITTLE processors.
- Fix segfault on build_mem_topology() error path.
- Fix 'perf mem' error on hybrid related to availability of mem event in a PMU.
- Fix missing reference count gets (map, maps) in the db-export code.
- Avoid recursively taking env->bpf_progs.lock in the 'perf_env' code.
- Use the newly introduced maps__for_each_map() to add missing locking around
iteration of 'struct map' entries.
- Parse NOTE segments until the build id is found, don't stop on the first one,
ELF files may have several such NOTE segments.
- Remove 'egrep' usage, its deprecated, use 'grep -E' instead.
- Warn first about missing libelf, not libbpf, that depends on libelf.
- Use alternative to 'find ... -printf' as this isn't supported in busybox.
- Address python 3.6 DeprecationWarning for string scapes.
- Fix memory leak in uniq() in libsubcmd.
- Fix man page formatting for 'perf lock'
- Fix some spelling mistakes.
perf tests:
- Fail shell tests that needs some symbol in perf itself if it is stripped.
These tests check if a symbol is resolved, if some hot function is indeed
detected by profiling, etc.
- The 'perf test sigtrap' test is currently failing on PREEMPT_RT, skip it if
sleeping spinlocks are detected (using BTF) and point to the mailing list
discussion about it. This test is also being skipped on several architectures
(powerpc, s390x, arm and aarch64) due to other pending issues with intruction
breakpoints.
- Adjust test case perf record offcpu profiling tests for s390.
- Fix 'Setup struct perf_event_attr' fails on s390 on z/VM guest, addressing
issues caused by the fallback from cycles to task-clock done in this release.
- Fix mask for VG register in the user-regs test.
- Use shellcheck on 'perf test' shell scripts automatically to make sure changes
don't introduce things it flags as problematic.
- Add option to change objdump binary and allow it to be set via 'perf config'.
- Add basic 'perf script', 'perf list --json" and 'perf diff' tests.
- Basic branch counter support.
- Make DSO tests a suite rather than individual.
- Remove atomics from test_loop to avoid test failures.
- Fix call chain match on powerpc for the record+probe_libc_inet_pton test.
- Improve Intel hybrid tests.
Vendor event files (JSON):
powerpc:
- Update datasource event name to fix duplicate events on IBM's Power10.
- Add PVN for HX-C2000 CPU with Power8 Architecture.
Intel:
- Alderlake/rocketlake metric fixes.
- Update emeraldrapids events to v1.02.
- Update icelakex events to v1.23.
- Update sapphirerapids events to v1.17.
- Add skx, clx, icx and spr upi bandwidth metric.
AMD:
- Add Zen 4 memory controller events.
RISC-V:
- Add StarFive Dubhe-80 and Dubhe-90 JSON files.
https://www.starfivetech.com/en/site/cpu-u
- Add T-HEAD C9xx JSON file.
https://github.com/riscv-software-src/opensbi/blob/master/docs/platform/thead-c9xx.md
ARM64:
- Remove UTF-8 characters from cmn.json, that were causing build failure in some
distros.
- Add core PMU events and metrics for Ampere One X.
- Rename Ampere One's BPU_FLUSH_MEM_FAULT to GPC_FLUSH_MEM_FAULT
libperf:
- Rename several perf_cpu_map constructor names to clarify what they really do.
- Ditto for some other methods, coping with some issues in their semantics,
like perf_cpu_map__empty() -> perf_cpu_map__has_any_cpu_or_is_empty().
- Document perf_cpu_map__nr()'s behavior
perf stat:
- Exit if parse groups fails.
- Combine the -A/--no-aggr and --no-merge options.
- Fix help message for --metric-no-threshold option.
Hardware tracing:
ARM64 CoreSight:
- Bump minimum OpenCSD version to ensure a bugfix is present.
- Add 'T' itrace option for timestamp trace
- Set start vm addr of exectable file to 0 and don't ignore first sample on the
arm-cs-trace-disasm.py 'perf script'.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZZ3FpgAKCRCyPKLppCJ+
Jz21AQDB93J4X05bwHJlRloN3KuA3LuwzvAQkwFoJSfFFMDnzgEAgbAMF1sANirP
5UcGxVgqoXWdrp9pkMcGlcFc7jsz5gA=
=SM26
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.8-1-2024-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
"Add Namhyung Kim as tools/perf/ co-maintainer, we're taking turns
processing patches, switching roles from perf-tools to perf-tools-next
at each Linux release.
Data profiling:
- Associate samples that identify loads and stores with data
structures. This uses events available on Intel, AMD and others and
DWARF info:
# To get memory access samples in kernel for 1 second (on Intel)
$ perf mem record -a -K --ldlat=4 -- sleep 1
# Similar for the AMD (but it requires 6.3+ kernel for BPF filters)
$ perf mem record -a --filter 'mem_op == load || mem_op == store, ip > 0x8000000000000000' -- sleep 1
Then, amongst several modes of post processing, one can do things like:
$ perf report -s type,typeoff --hierarchy --group --stdio
...
#
# Samples: 10K of events 'cpu/mem-loads,ldlat=4/P, cpu/mem-stores/P, dummy:u'
# Event count (approx.): 602758064
#
# Overhead Data Type / Data Type Offset
# ........................... ............................
#
26.09% 3.28% 0.00% long unsigned int
26.09% 3.28% 0.00% long unsigned int +0 (no field)
18.48% 0.73% 0.00% struct page
10.83% 0.02% 0.00% struct page +8 (lru.next)
3.90% 0.28% 0.00% struct page +0 (flags)
3.45% 0.06% 0.00% struct page +24 (mapping)
0.25% 0.28% 0.00% struct page +48 (_mapcount.counter)
0.02% 0.06% 0.00% struct page +32 (index)
0.02% 0.00% 0.00% struct page +52 (_refcount.counter)
0.02% 0.01% 0.00% struct page +56 (memcg_data)
0.00% 0.01% 0.00% struct page +16 (lru.prev)
15.37% 17.54% 0.00% (stack operation)
15.37% 17.54% 0.00% (stack operation) +0 (no field)
11.71% 50.27% 0.00% (unknown)
11.71% 50.27% 0.00% (unknown) +0 (no field)
$ perf annotate --data-type
...
Annotate type: 'struct cfs_rq' in [kernel.kallsyms] (13 samples):
============================================================================
samples offset size field
13 0 640 struct cfs_rq {
2 0 16 struct load_weight load {
2 0 8 unsigned long weight;
0 8 4 u32 inv_weight;
};
0 16 8 unsigned long runnable_weight;
0 24 4 unsigned int nr_running;
1 28 4 unsigned int h_nr_running;
...
$ perf annotate --data-type=page --group
Annotate type: 'struct page' in [kernel.kallsyms] (480 samples):
event[0] = cpu/mem-loads,ldlat=4/P
event[1] = cpu/mem-stores/P
event[2] = dummy:u
===================================================================================
samples offset size field
447 33 0 0 64 struct page {
108 8 0 0 8 long unsigned int flags;
319 13 0 8 40 union {
319 13 0 8 40 struct {
236 2 0 8 16 union {
236 2 0 8 16 struct list_head lru {
236 1 0 8 8 struct list_head* next;
0 1 0 16 8 struct list_head* prev;
};
236 2 0 8 16 struct {
236 1 0 8 8 void* __filler;
0 1 0 16 4 unsigned int mlock_count;
};
236 2 0 8 16 struct list_head buddy_list {
236 1 0 8 8 struct list_head* next;
0 1 0 16 8 struct list_head* prev;
};
236 2 0 8 16 struct list_head pcp_list {
236 1 0 8 8 struct list_head* next;
0 1 0 16 8 struct list_head* prev;
};
};
82 4 0 24 8 struct address_space* mapping;
1 7 0 32 8 union {
1 7 0 32 8 long unsigned int index;
1 7 0 32 8 long unsigned int share;
};
0 0 0 40 8 long unsigned int private;
};
This uses the existing annotate code, calling objdump to do the
disassembly, with improvements to avoid having this take too long,
but longer term a switch to a disassembler library, possibly
reusing code in the kernel will be pursued.
This is the initial implementation, please use it and report
impressions and bugs. Make sure the kernel-debuginfo packages match
the running kernel. The 'perf report' phase for non short perf.data
files may take a while.
There is a great article about it on LWN:
https://lwn.net/Articles/955709/ - "Data-type profiling for perf"
One last test I did while writing this text, on a AMD Ryzen 5950X,
using a distro kernel, while doing a simple 'find /' on an
otherwise idle system resulted in:
# uname -r
6.6.9-100.fc38.x86_64
# perf -vv | grep BPF_
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
bpf_skeletons: [ on ] # HAVE_BPF_SKEL
# rpm -qa | grep kernel-debuginfo
kernel-debuginfo-common-x86_64-6.6.9-100.fc38.x86_64
kernel-debuginfo-6.6.9-100.fc38.x86_64
#
# perf mem record -a --filter 'mem_op == load || mem_op == store, ip > 0x8000000000000000'
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 2.199 MB perf.data (2913 samples) ]
#
# ls -la perf.data
-rw-------. 1 root root 2346486 Jan 9 18:36 perf.data
# perf evlist
ibs_op//
dummy:u
# perf evlist -v
ibs_op//: type: 11, size: 136, config: 0, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ADDR|CPU|PERIOD|IDENTIFIER|DATA_SRC|WEIGHT, read_format: ID, disabled: 1, inherit: 1, freq: 1, sample_id_all: 1
dummy:u: type: 1 (PERF_TYPE_SOFTWARE), size: 136, config: 0x9 (PERF_COUNT_SW_DUMMY), { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|ADDR|CPU|IDENTIFIER|DATA_SRC|WEIGHT, read_format: ID, inherit: 1, exclude_kernel: 1, exclude_hv: 1, mmap: 1, comm: 1, task: 1, mmap_data: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1
#
# perf report -s type,typeoff --hierarchy --group --stdio
# Total Lost Samples: 0
#
# Samples: 2K of events 'ibs_op//, dummy:u'
# Event count (approx.): 1904553038
#
# Overhead Data Type / Data Type Offset
# ................... ............................
#
73.70% 0.00% (unknown)
73.70% 0.00% (unknown) +0 (no field)
3.01% 0.00% long unsigned int
3.00% 0.00% long unsigned int +0 (no field)
0.01% 0.00% long unsigned int +2 (no field)
2.73% 0.00% struct task_struct
1.71% 0.00% struct task_struct +52 (on_cpu)
0.38% 0.00% struct task_struct +2104 (rcu_read_unlock_special.b.blocked)
0.23% 0.00% struct task_struct +2100 (rcu_read_lock_nesting)
0.14% 0.00% struct task_struct +2384 ()
0.06% 0.00% struct task_struct +3096 (signal)
0.05% 0.00% struct task_struct +3616 (cgroups)
0.05% 0.00% struct task_struct +2344 (active_mm)
0.02% 0.00% struct task_struct +46 (flags)
0.02% 0.00% struct task_struct +2096 (migration_disabled)
0.01% 0.00% struct task_struct +24 (__state)
0.01% 0.00% struct task_struct +3956 (mm_cid_active)
0.01% 0.00% struct task_struct +1048 (cpus_ptr)
0.01% 0.00% struct task_struct +184 (se.group_node.next)
0.01% 0.00% struct task_struct +20 (thread_info.cpu)
0.00% 0.00% struct task_struct +104 (on_rq)
0.00% 0.00% struct task_struct +2456 (pid)
1.36% 0.00% struct module
0.59% 0.00% struct module +952 (kallsyms)
0.42% 0.00% struct module +0 (state)
0.23% 0.00% struct module +8 (list.next)
0.12% 0.00% struct module +216 (syms)
0.95% 0.00% struct inode
0.41% 0.00% struct inode +40 (i_sb)
0.22% 0.00% struct inode +0 (i_mode)
0.06% 0.00% struct inode +76 (i_rdev)
0.06% 0.00% struct inode +56 (i_security)
<SNIP>
perf top/report:
- Don't ignore job control, allowing control+Z + bg to work.
- Add s390 raw data interpretation for PAI (Processor Activity
Instrumentation) counters.
perf archive:
- Add new option '--all' to pack perf.data with DSOs.
- Add new option '--unpack' to expand tarballs.
Initialization speedups:
- Lazily initialize zstd streams to save memory when not using it.
- Lazily allocate/size mmap event copy.
- Lazy load kernel symbols in 'perf record'.
- Be lazier in allocating lost samples buffer in 'perf record'.
- Don't synthesize BPF events when disabled via the command line
(perf record --no-bpf-event).
Assorted improvements:
- Show note on AMD systems that the :p, :pp, :ppp and :P are all the
same, as IBS (Instruction Based Sampling) is used and it is
inherentely precise, not having levels of precision like in Intel
systems.
- When 'cycles' isn't available, fall back to the "task-clock" event
when not system wide, not to 'cpu-clock'.
- Add --debug-file option to redirect debug output, e.g.:
$ perf --debug-file /tmp/perf.log record -v true
- Shrink 'struct map' to under one cacheline by avoiding function
pointers for selecting if addresses are identity or DSO relative,
and using just a byte for some boolean struct members.
- Resolve the arch specific strerrno just once to use in
perf_env__arch_strerrno().
- Reduce memory for recording PERF_RECORD_LOST_SAMPLES event.
Assorted fixes:
- Fix the default 'perf top' usage on Intel hybrid systems, now it
starts with a browser showing the number of samples for Efficiency
(cpu_atom/cycles/P) and Performance (cpu_core/cycles/P). This
behaviour is similar on ARM64, with its respective set of
big.LITTLE processors.
- Fix segfault on build_mem_topology() error path.
- Fix 'perf mem' error on hybrid related to availability of mem event
in a PMU.
- Fix missing reference count gets (map, maps) in the db-export code.
- Avoid recursively taking env->bpf_progs.lock in the 'perf_env'
code.
- Use the newly introduced maps__for_each_map() to add missing
locking around iteration of 'struct map' entries.
- Parse NOTE segments until the build id is found, don't stop on the
first one, ELF files may have several such NOTE segments.
- Remove 'egrep' usage, its deprecated, use 'grep -E' instead.
- Warn first about missing libelf, not libbpf, that depends on
libelf.
- Use alternative to 'find ... -printf' as this isn't supported in
busybox.
- Address python 3.6 DeprecationWarning for string scapes.
- Fix memory leak in uniq() in libsubcmd.
- Fix man page formatting for 'perf lock'
- Fix some spelling mistakes.
perf tests:
- Fail shell tests that needs some symbol in perf itself if it is
stripped. These tests check if a symbol is resolved, if some hot
function is indeed detected by profiling, etc.
- The 'perf test sigtrap' test is currently failing on PREEMPT_RT,
skip it if sleeping spinlocks are detected (using BTF) and point to
the mailing list discussion about it. This test is also being
skipped on several architectures (powerpc, s390x, arm and aarch64)
due to other pending issues with intruction breakpoints.
- Adjust test case perf record offcpu profiling tests for s390.
- Fix 'Setup struct perf_event_attr' fails on s390 on z/VM guest,
addressing issues caused by the fallback from cycles to task-clock
done in this release.
- Fix mask for VG register in the user-regs test.
- Use shellcheck on 'perf test' shell scripts automatically to make
sure changes don't introduce things it flags as problematic.
- Add option to change objdump binary and allow it to be set via
'perf config'.
- Add basic 'perf script', 'perf list --json" and 'perf diff' tests.
- Basic branch counter support.
- Make DSO tests a suite rather than individual.
- Remove atomics from test_loop to avoid test failures.
- Fix call chain match on powerpc for the record+probe_libc_inet_pton
test.
- Improve Intel hybrid tests.
Vendor event files (JSON):
powerpc:
- Update datasource event name to fix duplicate events on IBM's
Power10.
- Add PVN for HX-C2000 CPU with Power8 Architecture.
Intel:
- Alderlake/rocketlake metric fixes.
- Update emeraldrapids events to v1.02.
- Update icelakex events to v1.23.
- Update sapphirerapids events to v1.17.
- Add skx, clx, icx and spr upi bandwidth metric.
AMD:
- Add Zen 4 memory controller events.
RISC-V:
- Add StarFive Dubhe-80 and Dubhe-90 JSON files.
https://www.starfivetech.com/en/site/cpu-u
- Add T-HEAD C9xx JSON file.
https://github.com/riscv-software-src/opensbi/blob/master/docs/platform/thead-c9xx.md
ARM64:
- Remove UTF-8 characters from cmn.json, that were causing build
failure in some distros.
- Add core PMU events and metrics for Ampere One X.
- Rename Ampere One's BPU_FLUSH_MEM_FAULT to GPC_FLUSH_MEM_FAULT
libperf:
- Rename several perf_cpu_map constructor names to clarify what they
really do.
- Ditto for some other methods, coping with some issues in their
semantics, like perf_cpu_map__empty() ->
perf_cpu_map__has_any_cpu_or_is_empty().
- Document perf_cpu_map__nr()'s behavior
perf stat:
- Exit if parse groups fails.
- Combine the -A/--no-aggr and --no-merge options.
- Fix help message for --metric-no-threshold option.
Hardware tracing:
ARM64 CoreSight:
- Bump minimum OpenCSD version to ensure a bugfix is present.
- Add 'T' itrace option for timestamp trace
- Set start vm addr of exectable file to 0 and don't ignore first
sample on the arm-cs-trace-disasm.py 'perf script'"
* tag 'perf-tools-for-v6.8-1-2024-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (179 commits)
MAINTAINERS: Add Namhyung as tools/perf/ co-maintainer
perf test: test case 'Setup struct perf_event_attr' fails on s390 on z/vm
perf db-export: Fix missing reference count get in call_path_from_sample()
perf tests: Add perf script test
libsubcmd: Fix memory leak in uniq()
perf TUI: Don't ignore job control
perf vendor events intel: Update sapphirerapids events to v1.17
perf vendor events intel: Update icelakex events to v1.23
perf vendor events intel: Update emeraldrapids events to v1.02
perf vendor events intel: Alderlake/rocketlake metric fixes
perf x86 test: Add hybrid test for conflicting legacy/sysfs event
perf x86 test: Update hybrid expectations
perf vendor events amd: Add Zen 4 memory controller events
perf stat: Fix hard coded LL miss units
perf record: Reduce memory for recording PERF_RECORD_LOST_SAMPLES event
perf env: Avoid recursively taking env->bpf_progs.lock
perf annotate: Add --insn-stat option for debugging
perf annotate: Add --type-stat option for debugging
perf annotate: Support event group display
perf annotate: Add --data-type option
...
-----BEGIN PGP SIGNATURE-----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=Py+n
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull security module updates from Paul Moore:
- Add three new syscalls: lsm_list_modules(), lsm_get_self_attr(), and
lsm_set_self_attr().
The first syscall simply lists the LSMs enabled, while the second and
third get and set the current process' LSM attributes. Yes, these
syscalls may provide similar functionality to what can be found under
/proc or /sys, but they were designed to support multiple,
simultaneaous (stacked) LSMs from the start as opposed to the current
/proc based solutions which were created at a time when only one LSM
was allowed to be active at a given time.
We have spent considerable time discussing ways to extend the
existing /proc interfaces to support multiple, simultaneaous LSMs and
even our best ideas have been far too ugly to support as a kernel
API; after +20 years in the kernel, I felt the LSM layer had
established itself enough to justify a handful of syscalls.
Support amongst the individual LSM developers has been nearly
unanimous, with a single objection coming from Tetsuo (TOMOYO) as he
is worried that the LSM_ID_XXX token concept will make it more
difficult for out-of-tree LSMs to survive. Several members of the LSM
community have demonstrated the ability for out-of-tree LSMs to
continue to exist by picking high/unused LSM_ID values as well as
pointing out that many kernel APIs rely on integer identifiers, e.g.
syscalls (!), but unfortunately Tetsuo's objections remain.
My personal opinion is that while I have no interest in penalizing
out-of-tree LSMs, I'm not going to penalize in-tree development to
support out-of-tree development, and I view this as a necessary step
forward to support the push for expanded LSM stacking and reduce our
reliance on /proc and /sys which has occassionally been problematic
for some container users. Finally, we have included the linux-api
folks on (all?) recent revisions of the patchset and addressed all of
their concerns.
- Add a new security_file_ioctl_compat() LSM hook to handle the 32-bit
ioctls on 64-bit systems problem.
This patch includes support for all of the existing LSMs which
provide ioctl hooks, although it turns out only SELinux actually
cares about the individual ioctls. It is worth noting that while
Casey (Smack) and Tetsuo (TOMOYO) did not give explicit ACKs to this
patch, they did both indicate they are okay with the changes.
- Fix a potential memory leak in the CALIPSO code when IPv6 is disabled
at boot.
While it's good that we are fixing this, I doubt this is something
users are seeing in the wild as you need to both disable IPv6 and
then attempt to configure IPv6 labeled networking via
NetLabel/CALIPSO; that just doesn't make much sense.
Normally this would go through netdev, but Jakub asked me to take
this patch and of all the trees I maintain, the LSM tree seemed like
the best fit.
- Update the LSM MAINTAINERS entry with additional information about
our process docs, patchwork, bug reporting, etc.
I also noticed that the Lockdown LSM is missing a dedicated
MAINTAINERS entry so I've added that to the pull request. I've been
working with one of the major Lockdown authors/contributors to see if
they are willing to step up and assume a Lockdown maintainer role;
hopefully that will happen soon, but in the meantime I'll continue to
look after it.
- Add a handful of mailmap entries for Serge Hallyn and myself.
* tag 'lsm-pr-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (27 commits)
lsm: new security_file_ioctl_compat() hook
lsm: Add a __counted_by() annotation to lsm_ctx.ctx
calipso: fix memory leak in netlbl_calipso_add_pass()
selftests: remove the LSM_ID_IMA check in lsm/lsm_list_modules_test
MAINTAINERS: add an entry for the lockdown LSM
MAINTAINERS: update the LSM entry
mailmap: add entries for Serge Hallyn's dead accounts
mailmap: update/replace my old email addresses
lsm: mark the lsm_id variables are marked as static
lsm: convert security_setselfattr() to use memdup_user()
lsm: align based on pointer length in lsm_fill_user_ctx()
lsm: consolidate buffer size handling into lsm_fill_user_ctx()
lsm: correct error codes in security_getselfattr()
lsm: cleanup the size counters in security_getselfattr()
lsm: don't yet account for IMA in LSM_CONFIG_COUNT calculation
lsm: drop LSM_ID_IMA
LSM: selftests for Linux Security Module syscalls
SELinux: Add selfattr hooks
AppArmor: Add selfattr hooks
Smack: implement setselfattr and getselfattr hooks
...
are included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the
series
"maple_tree: add mt_free_one() and mt_attr() helpers"
"Some cleanups of maple tree"
- In the series "mm: use memmap_on_memory semantics for dax/kmem"
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few
fixes) in the patch series
"Add folio_zero_tail() and folio_fill_tail()"
"Make folio_start_writeback return void"
"Fix fault handler's handling of poisoned tail pages"
"Convert aops->error_remove_page to ->error_remove_folio"
"Finish two folio conversions"
"More swap folio conversions"
- Kefeng Wang has also contributed folio-related work in the series
"mm: cleanup and use more folio in page fault"
- Jim Cromie has improved the kmemleak reporting output in the
series "tweak kmemleak report format".
- In the series "stackdepot: allow evicting stack traces" Andrey
Konovalov to permits clients (in this case KASAN) to cause
eviction of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series "mm:
page_alloc: fixes for high atomic reserve caluculations".
- Dmitry Rokosov has added to the samples/ dorectory some sample
code for a userspace memcg event listener application. See the
series "samples: introduce cgroup events listeners".
- Some mapletree maintanance work from Liam Howlett in the series
"maple_tree: iterator state changes".
- Nhat Pham has improved zswap's approach to writeback in the
series "workload-specific and memory pressure-driven zswap
writeback".
- DAMON/DAMOS feature and maintenance work from SeongJae Park in
the series
"mm/damon: let users feed and tame/auto-tune DAMOS"
"selftests/damon: add Python-written DAMON functionality tests"
"mm/damon: misc updates for 6.8"
- Yosry Ahmed has improved memcg's stats flushing in the series
"mm: memcg: subtree stats flushing and thresholds".
- In the series "Multi-size THP for anonymous memory" Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series "More buffer_head
cleanups".
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
"userfaultfd move option". UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a "KSM Advisor", in the series
"mm/ksm: Add ksm advisor". This is a governor which tunes KSM's
scanning aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory
use in the series "mm/zswap: dstmem reuse optimizations and
cleanups".
- Matthew Wilcox has performed some maintenance work on the
writeback code, both code and within filesystems. The series is
"Clean up the writeback paths".
- Andrey Konovalov has optimized KASAN's handling of alloc and
free stack traces for secondary-level allocators, in the series
"kasan: save mempool stack traces".
- Andrey also performed some KASAN maintenance work in the series
"kasan: assorted clean-ups".
- David Hildenbrand has gone to town on the rmap code. Cleanups,
more pte batching, folio conversions and more. See the series
"mm/rmap: interface overhaul".
- Kinsey Ho has contributed some maintenance work on the MGLRU
code in the series "mm/mglru: Kconfig cleanup".
- Matthew Wilcox has contributed lruvec page accounting code
cleanups in the series "Remove some lruvec page accounting
functions".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZZyF2wAKCRDdBJ7gKXxA
jjWjAP42LHvGSjp5M+Rs2rKFL0daBQsrlvy6/jCHUequSdWjSgEAmOx7bc5fbF27
Oa8+DxGM9C+fwqZ/7YxU2w/WuUmLPgU=
=0NHs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
commit 23baf831a3 ("mm, treewide: redefine MAX_ORDER sanely") has
changed the definition of MAX_ORDER to be inclusive. This has caused
issues with code that was not yet upstream and depended on the previous
definition.
To draw attention to the altered meaning of the define, rename MAX_ORDER
to MAX_PAGE_ORDER.
Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
perf test 17 'Setup struct perf_event_attr' fails on s390 z/VM guest,
using linux-next kernel.
Root cause is the fall-back from hardware counter cycles
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
config 0 (PERF_COUNT_HW_CPU_CYCLES)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ADDR|PERIOD|DATA_SRC
read_format ID|LOST
which returns -ENOENT on s390 z/VM guest. This causes the code to fall
back to software counter task-clock, as can be seen in the debug output:
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0x1 (PERF_COUNT_SW_TASK_CLOCK) <-here
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ADDR|PERIOD|DATA_SRC
read_format ID|LOST
This succeeds on s390 z/VM guest.
This successful installation of the counter task-clock is not listed in
the expected results and the test case fails.
This is caused by commit eb2eac0c7b ("perf evsel: Fallback to
"task-clock" when not system wide") which introduced fall back from
event 'cycles' to event 'task-clock'.
To fix this on s390 allow event number 0 (cycles) and event number 1
(task-clock) as expected result.
Output before:
# ./perf test -Fv 17
17: Setup struct perf_event_attr :
--- start ---
running './tests/attr/test-stat-group1'
unsupp './tests/attr/test-stat-group1'
running './tests/attr/test-record-graph-default'
test limitation '!aarch64'
excluded architecture list ['aarch64']
expected config=0, got 1
FAILED './tests/attr/test-record-graph-default' - match failure
---- end ----
Setup struct perf_event_attr: FAILED!
#
Output after:
# ./perf test -F 17
17: Setup struct perf_event_attr : Ok
#
Fixes: eb2eac0c7b ("perf evsel: Fallback to "task-clock" when not system wide")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20231219143235.1075522-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The addr_location map and maps fields in the inner loop were missing
calls to map__get()/maps__get(). The subsequent addr_location__exit()
call in each loop puts the map/maps fields causing use-after-free
aborts.
This issue reproduces on at least arm64 and x86_64 with something
simple like `perf record -g ls` followed by `perf script -s script.py`
with the following script:
perf_db_export_mode = True
perf_db_export_calls = False
perf_db_export_callchains = True
def sample_table(*args):
print(f'sample_table({args})')
def call_path_table(*args):
print(f'call_path_table({args}')
Committer testing:
This test, just introduced by Ian Rogers, now passes, not segfaulting
anymore:
# perf test "perf script tests"
95: perf script tests : Ok
#
Fixes: 0dd5041c9a ("perf addr_location: Add init/exit/copy functions")
Signed-off-by: Ben Gainey <ben.gainey@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231207140911.3240408-1-ben.gainey@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Start a new set of shell tests for testing perf script. The initial
contribution is checking that some perf db-export functionality works
as reported in this regression by Ben Gainey <ben.gainey@arm.com>:
https://lore.kernel.org/lkml/20231207140911.3240408-1-ben.gainey@arm.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ben Gainey <ben.gainey@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231207174057.1482161-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In its infinite wisdom, by default, SLang sets susp undef, and this can
only be un-done by calling SLtty_set_suspend_state(true). After every
SLang_init_tty().
Additionally, no provisions are made for maintaining the teletype
attributes across suspend/continue (outside of curses emulation
mode(?!), which provides full support, naturally), so we need to save
and restore the flags ourselves, as well as reset the text colours when
going under. We need to also re-draw the screen, and raising SIGWINCH,
shockingly, Just Works.
The correct solution would be to Not Use SLang, but as a stop-gap,
this makes TUI 'perf report' usable.
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yaowenbin <yaowenbin1@huawei.com>
Link: https://lore.kernel.org/r/0354dcae23a8713f75f4fed609e0caec3c6e3cd5.1672174189.git.nabijaczleweli@nabijaczleweli.xyz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update to v1.17 released in:
https://github.com/intel/perfmon/pull/123
Add events FP_ARITH_DISPATCHED.V0, FP_ARITH_DISPATCHED.V1,
FP_ARITH_DISPATCHED.V2, UNC_IIO_IOMMU0.1G_HITS, UNC_IIO_IOMMU0.2M_HITS
and UNC_IIO_IOMMU0.4K_HITS. Description updates.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240104074259.653219-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update to v1.23 released in:
https://github.com/intel/perfmon/pull/123
Updates to event descriptions.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240104074259.653219-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update to v1.02 released in:
https://github.com/intel/perfmon/pull/123
Removes events AMX_OPS_RETIRED.BF16 and AMX_OPS_RETIRED.INT8. Add
events FP_ARITH_DISPATCHED.V0, FP_ARITH_DISPATCHED.V1,
FP_ARITH_DISPATCHED.V2, UNC_IIO_IOMMU0.1G_HITS, UNC_IIO_IOMMU0.2M_HITS
and UNC_IIO_IOMMU0.4K_HITS. Description updates.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240104074259.653219-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix that the core PMU is being specified for 2 uncore events. Specify
a PMU for the alderlake UNCORE_FREQ metric.
Conversion script updated in:
https://github.com/intel/perfmon/pull/126
Committer testing:
Before this patch the "perf all metricgroups test" was failing, now:
root@number:~# perf test metric
10: PMU events :
10.3: Parsing of PMU event table metrics : Ok
10.4: Parsing of PMU event table metrics with fake PMUs : Ok
10.5: Parsing of metric thresholds with fake PMUs : Ok
61: Parse and process metrics : Ok
98: perf stat metrics (shadow stat) test : Skip
101: perf all metricgroups test : Ok
102: perf all metrics test : FAILED!
107: perf metrics value validation : Ok
root@number:~#
Test 102 is failing for another reason, not being able to get as many
counters as needed, Ian Rogers suggested disabling the NMI watchdog to
have more counters available:
root@number:/home/acme# cat /proc/sys/kernel/nmi_watchdog
1
root@number:/home/acme# echo 0 > /proc/sys/kernel/nmi_watchdog
root@number:/home/acme# perf test 102
102: perf all metrics test : Ok
root@number:/home/acme#
Closes: https://lore.kernel.org/lkml/ZZWOdHXJJ_oecWwm@kernel.org/
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240104074259.653219-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cpu-cycles event is both a legacy event and declared in
/sys/devices/cpu_core/events/cpu-cycles. The cycles event is a legacy
event but with no sysfs version.
Add a test that the sysfs version is preferred to the legacy for
cpu-cycles, while for cycles we use the legacy version.
Suggested-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240103170159.1435753-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The legacy events cpu-cycles and instructions have sysfs event
equivalents on x86 (see /sys/devices/cpu_core/events).
As sysfs/JSON events are now higher in priority than legacy events this
causes the hybrid test expectations not to be met.
To fix this switch to legacy events that don't have sysfs versions,
namely cpu-cycles becomes cycles and instructions becomes branches.
Fixes: a24d9d9dc0 ("perf parse-events: Make legacy events lower priority than sysfs/JSON")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Closes: https://lore.kernel.org/lkml/ZYbm5L7tw7bdpDpE@kernel.org/
Link: https://lore.kernel.org/r/20240103170159.1435753-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the jevents parser aware of the Unified Memory Controller (UMC) PMU
and add events taken from Section 8.2.1 "UMC Performance Monitor Events"
of the Processor Programming Reference (PPR) for AMD Family 19h Model 11h
processors. The events capture UMC command activity such as CAS, ACTIVATE,
PRECHARGE etc. while the metrics derive data bus utilization and memory
bandwidth out of these events.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/e0d8a7e8ca8ee3e378d8029e80b456ac327d6419.1701238314.git.sandipan.das@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Copy-paste error where LL cache misses are reported as l1i.
Fixes: 0a57b91080 ("perf stat: Use counts rather than saved_value")
Suggested-by: Guillaume Endignoux <guillaumee@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231211181242.1721059-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reduce from PERF_SAMPLE_MAX_SIZE to "sizeof(*lost) +
session->machines.host.id_hdr_size".
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231207021627.1322884-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add variants of perf_env__insert_bpf_prog_info(), perf_env__insert_btf()
and perf_env__find_btf prefixed with __ to indicate the
env->bpf_progs.lock is assumed held.
Call these variants when the lock is held to avoid recursively taking it
and potentially having a thread deadlock with itself.
Fixes: f8dfeae009 ("perf bpf: Show more BPF program info in print_bpf_prog_info()")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20231207014655.1252484-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is for a debugging purpose. It'd be useful to see per-instrucion
level success/failure stats.
$ perf annotate --data-type --insn-stat
Annotate Instruction stats
total 264, ok 143 (54.2%), bad 121 (45.8%)
Name : Good Bad
-----------------------------------------------------------
movq : 45 31
movl : 22 11
popq : 0 19
cmpl : 16 3
addq : 8 7
cmpq : 11 3
cmpxchgl : 3 7
cmpxchgq : 8 0
incl : 3 3
movzbl : 4 2
incq : 4 2
decl : 6 0
...
Committer notes:
So these are about being able to find the type for accesses from these
instructions, we should improve the naming, but it is for debugging, we
can improve this later:
@@ -3726,6 +3759,10 @@ struct annotated_data_type *hist_entry__get_data_type(struct hist_entry *he)
continue;
mem_type = find_data_type(ms, ip, op_loc->reg, op_loc->offset);
+ if (mem_type)
+ istat->good++;
+ else
+ istat->bad++;
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-18-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --type-stat option is to be used with --data-type and to print
detailed failure reasons for the data type annotation.
$ perf annotate --data-type --type-stat
Annotate data type stats:
total 294, ok 116 (39.5%), bad 178 (60.5%)
-----------------------------------------------------------
30 : no_sym
40 : no_insn_ops
33 : no_mem_ops
63 : no_var
4 : no_typeinfo
8 : bad_offset
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-17-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
