Add a simple test for USO. Tests both ipv4 and ipv6 with several full
segments and a partial segment.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-11-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Like e65d8b6f30 ("selftests: drv-net: adjust to socat changes") we
need to add shut-none for this test too.
The extra 0-packet can trigger a second (unexpected) reply from the server.
Fixes: 7e37e0eacd ("selftests: netfilter: nft_tproxy.sh: add tcp tests")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20260408152432.24b8ad0d@kernel.org/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20260409224506.27072-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When developing new test cases and reproducing failures in
existing ones we currently have to run the entire test which
can take minutes to finish.
Add command line options for test selection, modeled after
kselftest_harness.h:
-l list tests (filtered, if filters were specified)
-t name include test
-T name exclude test
Since we don't have as clean separation into fixture / variant /
test as kselftest_harness this is not really a 1 to 1 match.
We have to lean on glob patterns instead.
Like in kselftest_harness filters are evaluated in order, first
match wins. If only exclusions are specified everything else is
included and vice versa.
Glob patterns (*, ?, [) are supported in addition to exact
matching.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Tested-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260410013921.1710295-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest for the IFLA_BR_STP_MODE bridge attribute that verifies:
1. stp_mode defaults to auto on new bridges
2. stp_mode can be toggled between user, kernel, and auto
3. Changing stp_mode while STP is active is rejected with -EBUSY
4. Re-setting the same stp_mode while STP is active succeeds
5. stp_mode user in a network namespace yields userspace STP (stp_state=2)
6. stp_mode kernel forces kernel STP (stp_state=1)
7. stp_mode auto in a netns preserves traditional fallback to kernel STP
8. stp_mode and stp_state can be set atomically in a single message
9. stp_mode persists across STP disable/enable cycles
Test 5 is the key use case: it demonstrates that userspace STP can now
be enabled in non-init network namespaces by setting stp_mode to user
before enabling STP.
Test 8 verifies the atomic usage pattern where both attributes are set
in a single netlink message, which is supported because br_changelink()
processes IFLA_BR_STP_MODE before IFLA_BR_STP_STATE.
The test gracefully skips if the installed iproute2 does not support
the stp_mode attribute.
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Andy Roulin <aroulin@nvidia.com>
Link: https://patch.msgid.link/20260405205224.3163000-4-aroulin@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the ntuple flow steering test to cover dst-ip, src-port, and
dst-port fields. The test supports arbitrary combinations of the fields,
for now we test src_ip/dst_ip, and src_ip/dst_ip/src_port/dst_port.
The tests currently match full fields, but we can consider adding
support for masked fields in the future.
TAP version 13
1..24
ok 1 ntuple.queue.tcp4.src_ip
ok 2 ntuple.queue.tcp4.dst_ip
ok 3 ntuple.queue.tcp4.src_port
ok 4 ntuple.queue.tcp4.dst_port
ok 5 ntuple.queue.tcp4.src_ip.dst_ip
ok 6 ntuple.queue.tcp4.src_ip.dst_ip.src_port.dst_port
ok 7 ntuple.queue.udp4.src_ip
ok 8 ntuple.queue.udp4.dst_ip
ok 9 ntuple.queue.udp4.src_port
ok 10 ntuple.queue.udp4.dst_port
ok 11 ntuple.queue.udp4.src_ip.dst_ip
ok 12 ntuple.queue.udp4.src_ip.dst_ip.src_port.dst_port
ok 13 ntuple.queue.tcp6.src_ip
ok 14 ntuple.queue.tcp6.dst_ip
ok 15 ntuple.queue.tcp6.src_port
ok 16 ntuple.queue.tcp6.dst_port
ok 17 ntuple.queue.tcp6.src_ip.dst_ip
ok 18 ntuple.queue.tcp6.src_ip.dst_ip.src_port.dst_port
ok 19 ntuple.queue.udp6.src_ip
ok 20 ntuple.queue.udp6.dst_ip
ok 21 ntuple.queue.udp6.src_port
ok 22 ntuple.queue.udp6.dst_port
ok 23 ntuple.queue.udp6.src_ip.dst_ip
ok 24 ntuple.queue.udp6.src_ip.dst_ip.src_port.dst_port
# Totals: pass:24 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dimitri Daskalakis <daskald@meta.com>
Link: https://patch.msgid.link/20260407164954.2977820-3-dimitri.daskalakis1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test for ethtool NFC (ntuple) flow steering rules. The test
creates an ntuple rule matching on various flow fields and verifies
that traffic is steered to the correct queue.
The test forces all traffic to queue 0 via the indirection table,
then installs an ntuple rule to steer select traffic to a specific
queue. The test then verifies the expected number of packets is received
on the queue.
This test has variants for TCP/UDP over IPv4/IPv6, with rules matching
the source IP. Additional match fields will be added in the next commit.
TAP version 13
1..4
ok 1 ntuple.queue.tcp4.src_ip
ok 2 ntuple.queue.udp4.src_ip
ok 3 ntuple.queue.tcp6.src_ip
ok 4 ntuple.queue.udp6.src_ip
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Dimitri Daskalakis <daskald@meta.com>
Link: https://patch.msgid.link/20260407164954.2977820-2-dimitri.daskalakis1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
People (do people still write code or is it all AI?) seem to not
get that ksft_run() can only be called once. If we call it
multiple times KTAP parsers will likely cut off after the first
batch has finished.
Link: https://patch.msgid.link/20260408221952.819822-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
netkit: Support for io_uring zero-copy and AF_XDP
Containers use virtual netdevs to route traffic from a physical netdev
in the host namespace. They do not have access to the physical netdev
in the host and thus can't use memory providers or AF_XDP that require
reconfiguring/restarting queues in the physical netdev.
This patchset adds the concept of queue leasing to virtual netdevs that
allow containers to use memory providers and AF_XDP at native speed.
Leased queues are bound to a real queue in a physical netdev and act
as a proxy.
Memory providers and AF_XDP operations take an ifindex and queue id,
so containers would pass in an ifindex for a virtual netdev and a queue
id of a leased queue, which then gets proxied to the underlying real
queue.
We have implemented support for this concept in netkit and tested the
latter against Nvidia ConnectX-6 (mlx5) as well as Broadcom BCM957504
(bnxt_en) 100G NICs. For more details see the individual patches.
====================
Link: https://patch.msgid.link/20260402231031.447597-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add extensive selftests for netkit queue leasing, using io_uring zero
copy test binary inside of a netns with netkit. This checks that memory
providers can be bound against virtual queues in a netkit within a
netns that are leasing from a physical netdev in the default netns.
Also add various test cases around corner cases for the queue creation
itself as well as queue info dumping and teardown in case of netkit in
device pair and single mode.
Signed-off-by: David Wei <dw@davidwei.uk>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20260402231031.447597-15-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add resource_dump_test() which verifies dumping resources for all
devices and ports, and tests that scope=dev returns only device-level
resources and scope=port returns only port resources.
Skip if userspace does not support the scope parameter.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260407194107.148063-12-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tests that querying a specific port handle returns the expected
resource name and size.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260407194107.148063-9-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In "bpf: Disallow freplace on XDP with mismatched xdp_has_frags values" [1],
this XDP test is suggested to add to xdp.py.
1. Verify the failure of updating frag-capable prog with non-frag-capable
prog, when the frag-capable prog attaches to mtu=9k driver.
The test has been verified against Mellanox CX6 and Intel 82599ES NICs.
With dropping other tests, here is the test log.
# ethtool -i eth0
driver: mlx5_core
version: 6.19.0-061900-generic
# NETIF=eth0 python3 xdp.py
TAP version 13
1..1
ok 1 xdp.test_xdp_native_update_mb_to_sb
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
# ethtool -i eth0
driver: ixgbe
version: 6.19.0-061900-generic
# NETIF=eth0 python3 xdp.py
TAP version 13
1..1
# CMD: ip link set dev eth0 xdpdrv obj /path/to/tools/testing/selftests/net/lib/xdp_dummy.bpf.o sec xdp.frags
# EXIT: 2
# STDERR: RTNETLINK answers: Invalid argument
ok 1 xdp.test_xdp_native_update_mb_to_sb # SKIP device does not support multi-buffer XDP
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:1 error:0
Signed-off-by: Leon Hwang <leon.huangfu@shopee.com>
Link: https://patch.msgid.link/20260406072655.368173-1-leon.huangfu@shopee.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The piece of code which processes the command line arguments and
populates NETIFS based on them is really unobvious. Rewrite it so that
the intention is clear and the code is easy to follow.
Suggested-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260407102058.867279-1-ioana.ciornei@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0E3L
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2026-04-08' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2026-04-08
1) Update outdated comment in xfrm_dst_check().
From kexinsun.
2) Drop support for HMAC-RIPEMD-160 from IPsec.
From Eric Biggers.
* tag 'ipsec-next-2026-04-08' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: Drop support for HMAC-RIPEMD-160
xfrm: update outdated comment
====================
Link: https://patch.msgid.link/20260408094258.148555-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce a new stress test to check for race conditions in the
nfnetlink_queue subsystem, where an entry is freed while another CPU is
concurrently walking the global rhashtable.
To trigger this, `nf_queue.c` is extended with two new flags:
* -O (out-of-order): Buffers packet IDs and flushes them in reverse.
* -b (bogus verdicts): Floods the kernel with non-existent packet IDs.
The bogus verdict loop forces the kernel's lookup function to perform
full rhashtable bucket traversals (-ENOENT). Combined with reverse-order
flushing and heavy parallel UDP/ping flooding across 8 queues, this puts
the nfnetlink_queue code under pressure.
Joint work with Florian Westphal.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Add a selftest that verifies the dst_cache in seg6 lwtunnel is not
shared between the input (forwarding) and output (locally generated)
paths.
The test creates three namespaces (ns_src, ns_router, ns_dst)
connected in a line. An SRv6 encap route on ns_router encapsulates
traffic destined to cafe::1 with SID fc00::100. The SID is
reachable only for forwarded traffic (from ns_src) via an ip rule
matching the ingress interface (iif veth-r0 lookup 100), and
blackholed in the main table.
The test verifies that:
1. A packet generated locally on ns_router does not reach
ns_dst with an empty cache, since the SID is blackholed;
2. A forwarded packet from ns_src populates the input cache
from table 100 and reaches ns_dst;
3. A packet generated locally on ns_router still does not
reach ns_dst after the input cache is populated,
confirming the output path does not reuse the input
cache entry.
Both the forwarded and local packets are pinned to the same CPU
with taskset, since dst_cache is per-cpu.
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Link: https://patch.msgid.link/20260404004405.4057-3-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The querier-interval test adds h1 (currently a slave of the VRF created
by simple_if_init) to a temporary bridge br1 acting as an outside IGMP
querier. The kernel VRF driver (drivers/net/vrf.c) calls cycle_netdev()
on every slave add and remove, toggling the interface admin-down then up.
Phylink takes the PHY down during the admin-down half of that cycle.
Since h1 and swp1 are cable-connected, swp1 also loses its link may need
several seconds to re-negotiate.
Use setup_wait_dev $h1 0 which waits for h1 to return to UP state, so the
test can rely on the link being back up at this point.
Fixes: 4d8610ee8b ("selftests: net: bridge: add vlan mcast_querier_interval tests")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://patch.msgid.link/c830f130860fd2efae08bfb9e5b25fd028e58ce5.1775424423.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
socat v1.8.1.0 now defaults to shut-null, it sends an extra
0-length UDP packet when sender disconnects. This breaks
our tests which expect the exact packet sequence.
Add shut-none which was the old default where necessary.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260404230103.2719103-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drop support for HMAC-RIPEMD-160 from IPsec to reduce the UAPI surface
and simplify future maintenance. It's almost certainly unused.
RIPEMD-160 received some attention in the early 2000s when SHA-* weren't
quite as well established. But it never received much adoption outside
of certain niches such as Bitcoin.
It's actually unclear that Linux + IPsec + HMAC-RIPEMD-160 has *ever*
been used, even historically. When support for it was added in 2003, it
was done so in a "cleanup" commit without any justification [1]. It
didn't actually work until someone happened to fix it 5 years later [2].
That person didn't use or test it either [3]. Finally, also note that
"hmac(rmd160)" is by far the slowest of the algorithms in aalg_list[].
Of course, today IPsec is usually used with an AEAD, such as AES-GCM.
But even for IPsec users still using a dedicated auth algorithm, they
almost certainly aren't using, and shouldn't use, HMAC-RIPEMD-160.
Thus, let's just drop support for it. Note: no kconfig update is
needed, since CRYPTO_RMD160 wasn't actually being selected anyway.
References:
[1] linux-history commit d462985fc1941a47
("[IPSEC]: Clean up key manager algorithm handling.")
[2] linux commit a13366c632
("xfrm: xfrm_algo: correct usage of RIPEMD-160")
[3] https://lore.kernel.org/all/1212340578-15574-1-git-send-email-rueegsegger@swiss-it.ch
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In this "delete re-add signal" MPTCP Join subtest, the endpoint linked
to the initial subflow is removed, but readded once with different ID.
It appears that there was an issue when reusing the same ID, recently
fixed by commit d191101dee ("mptcp: pm: in-kernel: always set ID as
avail when rm endp"). The test then now reuses the same ID the first
time, but continue to use another one (88) the second time.
This should then cover more cases.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/615
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260403-net-next-mptcp-msg_eor-misc-v1-5-b0b33bea3fed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When send() or recv() returns -1 with errno == EINTR, the code skips
the break but still adds the return value to nwritten/nread, making it
decrease by 1. This leads to wrong buffer offsets and wrong bytes count.
Fix it by explicitly continuing the loop on EINTR, so the return value
is only added when it is positive.
Fixes: a8ed71a27e ("vsock/test: add recv_buf() utility function")
Fixes: 12329bd51f ("vsock/test: add send_buf() utility function")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Link: https://patch.msgid.link/20260403093251.30662-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since we have changed how big user defined headroom in umem can be,
change the logic in testapp_stats_rx_dropped() so we pass updated
headroom validation in xdp_umem_reg() and still drop half of frames.
Test works on non-mbuf setup so __xsk_pool_get_rx_frame_size() that is
called on xsk_rcv_check() will not account skb_shared_info size. Taking
the tailroom size into account in test being fixed is needed as
xdp_umem_reg() defaults to respect it.
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20260402154958.562179-9-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently two different XDP programs share a static variable for
different purposes (picking where to redirect on shared umem test &
whether to drop a packet). This can be a problem when running full test
suite - idx can be written by shared umem test and this value can cause
a false behavior within XDP drop half test.
Introduce a dedicated variable for drop half test so that these two
don't step on each other toes. There is no real need for using
__sync_fetch_and_add here as XSK tests are executed on single CPU.
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20260402154958.562179-8-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Skip tail adjust tests in xskxceiver for SKB mode as it is not very
friendly for it. multi-buffer case does not work as xdp_rxq_info that is
registered for generic XDP does not report ::frag_size. The non-mbuf
path copies packet via skb_pp_cow_data() which only accounts for
headroom, leaving us with no tailroom and causing underlying XDP prog to
drop packets therefore.
For multi-buffer test on other modes, change the amount of bytes we use
for growth, assume worst-case scenario and take care of headroom and
tailroom.
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20260402154958.562179-7-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Parametrize current way of getting MAX_SKB_FRAGS value from {sys,proc}fs
so that it can be re-used to get cache line size of system's CPU. All
that just to mimic and compute size of kernel's struct skb_shared_info
which for xsk and test suite interpret as tailroom.
Introduce two variables to ifobject struct that will carry count of skb
frags and tailroom size. Do the reading and computing once, at the
beginning of test suite execution in xskxceiver, but for test_progs such
way is not possible as in this environment each test setups and torns
down ifobject structs.
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20260402154958.562179-6-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sometimes it's hard to spot the ok / not ok lines in the output.
This is especially true for the GRO tests which retries a lot
so there's a wall of non-fatal output printed.
Try to color the crucial lines green / red / yellow when running
in a terminal.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260402215444.1589893-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix a CONFIG_SPARSEMEM crash on RV32 by avoiding early phys_to_page()
- Prevent runtime const infrastructure from being used by modules, similar
to what was done for x86
- Avoid problems when shutting down ACPI systems with IOMMUs by adding
a device dependency between IOMMU and devices that use it
- Fix a bug where the CPU pointer masking state isn't properly reset
when tagged addresses aren't enabled for a task
- Fix some incorrect register assignments, and add some missing ones,
in kgdb support code
- Fix compilation of non-kernel code that uses the ptrace uapi header
by replacing BIT() with _BITUL()
- Fix compilation of the validate_v_ptrace kselftest by working around
kselftest macro expansion issues
-----BEGIN PGP SIGNATURE-----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=d0PH
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Fix a CONFIG_SPARSEMEM crash on RV32 by avoiding early phys_to_page()
- Prevent runtime const infrastructure from being used by modules,
similar to what was done for x86
- Avoid problems when shutting down ACPI systems with IOMMUs by adding
a device dependency between IOMMU and devices that use it
- Fix a bug where the CPU pointer masking state isn't properly reset
when tagged addresses aren't enabled for a task
- Fix some incorrect register assignments, and add some missing ones,
in kgdb support code
- Fix compilation of non-kernel code that uses the ptrace uapi header
by replacing BIT() with _BITUL()
- Fix compilation of the validate_v_ptrace kselftest by working around
kselftest macro expansion issues
* tag 'riscv-for-linus-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
ACPI: RIMT: Add dependency between iommu and devices
selftests: riscv: Add braces around EXPECT_EQ()
riscv: use _BITUL macro rather than BIT() in ptrace uapi and kselftests
riscv: Reset pmm when PR_TAGGED_ADDR_ENABLE is not set
riscv: make runtime const not usable by modules
riscv: patch: Avoid early phys_to_page()
riscv: kgdb: fix several debug register assignment bugs
EXPECT_EQ() expands to multiple lines, breaking up one-line if
statements. This issue was not present in the patch on the mailing list
but was instead introduced by the maintainer when attempting to fix up
checkpatch warnings. Add braces around EXPECT_EQ() to avoid the error
even though checkpatch suggests them to be removed:
validate_v_ptrace.c:626:17: error: ‘else’ without a previous ‘if’
Fixes: 3789d5eecd ("selftests: riscv: verify syscalls discard vector context")
Fixes: 30eb191c89 ("selftests: riscv: verify ptrace rejects invalid vector csr inputs")
Fixes: 849f05ae1e ("selftests: riscv: verify ptrace accepts valid vector csr values")
Signed-off-by: Charlie Jenkins <thecharlesjenkins@gmail.com>
Reviewed-and-tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Link: https://patch.msgid.link/20260309-fix_selftests-v2-2-9d5a553a531e@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
We have a test for coalescing with bad TCP checksum, let's also
test bad IPv4 header checksum.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260402210000.1512696-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We explicitly test ipip encap. Let's add ip6ip6, too. Having
just ipip seems like favoring IPv4 which we should not do :)
Testing all combinations is left for future work, not sure
it's actually worth it.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260402210000.1512696-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When constructing the packets for large_* test cases we use
a static value for packet count and MSS. It works okay for
ipv4 vs ipv6 but the gap between ipv4 and ip6ip6 is going to
be quite significant.
Make the defines calculate the worst case values, those
are only used for sizing stack arrays. Create helpers for
calculating precise values based on the exact test case.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260402210000.1512696-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Willem points out TOTAL_HDR_LEN is identical to MAX_HDR_LEN.
This seems to have been the case ever since the test was added.
Replace the uses of TOTAL_HDR_LEN with MAX_HDR_LEN, MAX seems
more common for what this value is.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260402210000.1512696-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Try to use already calculated offsets and not depend on the ipip
flag as much. This patch should not change any functionality,
it's just a cleanup to make ip6ip6 support easier.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260402210000.1512696-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The new capacity/order test exits as soon as it sees the expected
packet sequence. This may allow the "flushing" FIN packet to spill
over to the next test. Let's always wait for the FIN before exiting.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260402210000.1512696-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Small IPv4 packets get padded to 60B, this may break / confuse
some buggy implementations. Add a test to coalesce a 1B payload.
Keep this separate from the lrg_sml test because I suspect some
implementations may not handle this case (treat padded frames
as ineligible for coalescing).
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260402210000.1512696-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test trying to induce a GRO context timeout followed
by another sequence of packets for the same flow. The second
burst arrives 100ms after the first one so any implementation
(SW or HW) must time out waiting at that point. We expect both
bursts to be aggregated successfully but separately.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260402210000.1512696-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=w0RY
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix register equivalence for pointers to packet (Alexei Starovoitov)
- Fix incorrect pruning due to atomic fetch precision tracking (Daniel
Borkmann)
- Fix grace period wait for bpf_link-ed tracepoints (Kumar Kartikeya
Dwivedi)
- Fix use-after-free of sockmap's sk->sk_socket (Kuniyuki Iwashima)
- Reject direct access to nullable PTR_TO_BUF pointers (Qi Tang)
- Reject sleepable kprobe_multi programs at attach time (Varun R
Mallya)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add more precision tracking tests for atomics
bpf: Fix incorrect pruning due to atomic fetch precision tracking
bpf: Reject sleepable kprobe_multi programs at attach time
bpf: reject direct access to nullable PTR_TO_BUF pointers
bpf: sockmap: Fix use-after-free of sk->sk_socket in sk_psock_verdict_data_ready().
bpf: Fix grace period wait for tracepoint bpf_link
bpf: Fix regsafe() for pointers to packet
Add verifier precision tracking tests for BPF atomic fetch operations.
Validate that backtrack_insn correctly propagates precision from the
fetch dst_reg to the stack slot for {fetch_add,xchg,cmpxchg} atomics.
For the first two src_reg gets the old memory value, and for the last
one r0. The fetched register is used for pointer arithmetic to trigger
backtracking. Also add coverage for fetch_{or,and,xor} flavors which
exercises the bitwise atomic fetch variants going through the same
insn->imm & BPF_FETCH check but with different imm values.
Add dual-precision regression tests for fetch_add and cmpxchg where
both the fetched value and a reread of the same stack slot are tracked
for precision. After the atomic operation, the stack slot is STACK_MISC,
so the ldx does not set INSN_F_STACK_ACCESS. These tests verify that
stack precision propagates solely through the atomic fetch's load side.
Add map-based tests for fetch_add and cmpxchg which validate that non-
stack atomic fetch completes precision tracking without falling back
to mark_all_scalars_precise. Lastly, add 32-bit variants for {fetch_add,
cmpxchg} on map values to cover the second valid atomic operand size.
# LDLIBS=-static PKG_CONFIG='pkg-config --static' ./vmtest.sh -- ./test_progs -t verifier_precision
[...]
+ /etc/rcS.d/S50-startup
./test_progs -t verifier_precision
[ 1.697105] bpf_testmod: loading out-of-tree module taints kernel.
[ 1.700220] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
[ 1.777043] tsc: Refined TSC clocksource calibration: 3407.986 MHz
[ 1.777619] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fc6d7268, max_idle_ns: 440795260133 ns
[ 1.778658] clocksource: Switched to clocksource tsc
#633/1 verifier_precision/bpf_neg:OK
#633/2 verifier_precision/bpf_end_to_le:OK
#633/3 verifier_precision/bpf_end_to_be:OK
#633/4 verifier_precision/bpf_end_bswap:OK
#633/5 verifier_precision/bpf_load_acquire:OK
#633/6 verifier_precision/bpf_store_release:OK
#633/7 verifier_precision/state_loop_first_last_equal:OK
#633/8 verifier_precision/bpf_cond_op_r10:OK
#633/9 verifier_precision/bpf_cond_op_not_r10:OK
#633/10 verifier_precision/bpf_atomic_fetch_add_precision:OK
#633/11 verifier_precision/bpf_atomic_xchg_precision:OK
#633/12 verifier_precision/bpf_atomic_fetch_or_precision:OK
#633/13 verifier_precision/bpf_atomic_fetch_and_precision:OK
#633/14 verifier_precision/bpf_atomic_fetch_xor_precision:OK
#633/15 verifier_precision/bpf_atomic_cmpxchg_precision:OK
#633/16 verifier_precision/bpf_atomic_fetch_add_dual_precision:OK
#633/17 verifier_precision/bpf_atomic_cmpxchg_dual_precision:OK
#633/18 verifier_precision/bpf_atomic_fetch_add_map_precision:OK
#633/19 verifier_precision/bpf_atomic_cmpxchg_map_precision:OK
#633/20 verifier_precision/bpf_atomic_fetch_add_32bit_precision:OK
#633/21 verifier_precision/bpf_atomic_cmpxchg_32bit_precision:OK
#633/22 verifier_precision/bpf_neg_2:OK
#633/23 verifier_precision/bpf_neg_3:OK
#633/24 verifier_precision/bpf_neg_4:OK
#633/25 verifier_precision/bpf_neg_5:OK
#633 verifier_precision:OK
Summary: 1/25 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260331222020.401848-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
to each PR carrying 30%+ more fixes than in previous era. The good
news is that so far none of the "extra" fixes are themselves
causing real regressions. Not sure how much comfort that is.
Current release - fix to a fix:
- netdevsim: fix build if SKB_EXTENSIONS=n
- eth: stmmac: skip VLAN restore when VLAN hash ops are missing
Previous releases - regressions:
- wifi: iwlwifi: mvm: don't send a 6E related command when
not supported
Previous releases - always broken:
- some info leak fixes
- add missing clearing of skb->cb[] on ICMP paths from tunnels
- ipv6: flowlabel: defer exclusive option free until RCU teardown
- ipv6: avoid overflows in ip6_datagram_send_ctl()
- mpls: add seqcount to protect platform_labels from OOB access
- bridge: improve safety of parsing ND options
- Bluetooth: fix leaks, overflows and races in hci_sync
- netfilter: add more input validation, some to address bugs directly
some to prevent exploits from cooking up broken configurations
- wifi: ath: avoid poor performance due to stopping the wrong
aggregation session
- wifi: virt_wifi: remove SET_NETDEV_DEV to avoid use-after-free
- eth: fec: fix the PTP periodic output sysfs interface
- eth: enetc: safely reinitialize TX BD ring when it has unsent frames
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3Pjk
-----END PGP SIGNATURE-----
Merge tag 'net-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"With fixes from wireless, bluetooth and netfilter included we're back
to each PR carrying 30%+ more fixes than in previous era.
The good news is that so far none of the "extra" fixes are themselves
causing real regressions. Not sure how much comfort that is.
Current release - fix to a fix:
- netdevsim: fix build if SKB_EXTENSIONS=n
- eth: stmmac: skip VLAN restore when VLAN hash ops are missing
Previous releases - regressions:
- wifi: iwlwifi: mvm: don't send a 6E related command when
not supported
Previous releases - always broken:
- some info leak fixes
- add missing clearing of skb->cb[] on ICMP paths from tunnels
- ipv6:
- flowlabel: defer exclusive option free until RCU teardown
- avoid overflows in ip6_datagram_send_ctl()
- mpls: add seqcount to protect platform_labels from OOB access
- bridge: improve safety of parsing ND options
- bluetooth: fix leaks, overflows and races in hci_sync
- netfilter: add more input validation, some to address bugs directly
some to prevent exploits from cooking up broken configurations
- wifi:
- ath: avoid poor performance due to stopping the wrong
aggregation session
- virt_wifi: remove SET_NETDEV_DEV to avoid use-after-free
- eth:
- fec: fix the PTP periodic output sysfs interface
- enetc: safely reinitialize TX BD ring when it has unsent frames"
* tag 'net-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
eth: fbnic: Increase FBNIC_QUEUE_SIZE_MIN to 64
ipv6: avoid overflows in ip6_datagram_send_ctl()
net: hsr: fix VLAN add unwind on slave errors
net: hsr: serialize seq_blocks merge across nodes
vsock: initialize child_ns_mode_locked in vsock_net_init()
selftests/tc-testing: add tests for cls_fw and cls_flow on shared blocks
net/sched: cls_flow: fix NULL pointer dereference on shared blocks
net/sched: cls_fw: fix NULL pointer dereference on shared blocks
net/x25: Fix overflow when accumulating packets
net/x25: Fix potential double free of skb
bnxt_en: Restore default stat ctxs for ULP when resource is available
bnxt_en: Don't assume XDP is never enabled in bnxt_init_dflt_ring_mode()
bnxt_en: Refactor some basic ring setup and adjustment logic
net/mlx5: Fix switchdev mode rollback in case of failure
net/mlx5: Avoid "No data available" when FW version queries fail
net/mlx5: lag: Check for LAG device before creating debugfs
net: macb: properly unregister fixed rate clocks
net: macb: fix clk handling on PCI glue driver removal
virtio_net: clamp rss_max_key_size to NETDEV_RSS_KEY_LEN
net/sched: sch_netem: fix out-of-bounds access in packet corruption
...
Regression tests for the shared-block NULL derefs fixed in the previous
two patches:
- fw: attempt to attach an empty fw filter to a shared block and
verify the configuration is rejected with EINVAL.
- flow: create a flow filter on a shared block without a baseclass
and verify the configuration is rejected with EINVAL.
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260331050217.504278-3-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a new selftest - ethtool_std_stats.sh - which validates the
eth-ctrl, eth-mac and pause standard statistics exported by an
interface. Collision related eth-mac counters as well as the error ones
will be checked against zero since that is the most likely correct
scenario.
The central part of this patch is the traffic_test() function which
gathers the 'before' counter values, sends a batch of traffic and then
interrogates again the same counters in order to determine if the delta
is on target. The function receives an array through which the caller
can request what counters to be interrogated and, for each of them, what
is their target delta value.
The output from this selftest looks as follows on a LX2160ARDB board:
$ ./run_kselftest.sh -t drivers/net/hw:ethtool_std_stats.sh
TAP version 13
1..1
# timeout set to 0
# selftests: drivers/net/hw: ethtool_std_stats.sh
# TAP version 13
# 1..26
# ok 1 ethtool_std_stats.eth-ctrl-MACControlFramesTransmitted
# ok 2 ethtool_std_stats.eth-ctrl-MACControlFramesReceived
# ok 3 ethtool_std_stats.eth-mac-FrameCheckSequenceErrors
# ok 4 ethtool_std_stats.eth-mac-AlignmentErrors
# ok 5 ethtool_std_stats.eth-mac-FramesLostDueToIntMACXmitError
# ok 6 ethtool_std_stats.eth-mac-CarrierSenseErrors # SKIP
# ok 7 ethtool_std_stats.eth-mac-FramesLostDueToIntMACRcvError
# ok 8 ethtool_std_stats.eth-mac-InRangeLengthErrors # SKIP
# ok 9 ethtool_std_stats.eth-mac-OutOfRangeLengthField # SKIP
# ok 10 ethtool_std_stats.eth-mac-FrameTooLongErrors # SKIP
# ok 11 ethtool_std_stats.eth-mac-FramesAbortedDueToXSColls # SKIP
# ok 12 ethtool_std_stats.eth-mac-SingleCollisionFrames # SKIP
# ok 13 ethtool_std_stats.eth-mac-MultipleCollisionFrames # SKIP
# ok 14 ethtool_std_stats.eth-mac-FramesWithDeferredXmissions # SKIP
# ok 15 ethtool_std_stats.eth-mac-LateCollisions # SKIP
# ok 16 ethtool_std_stats.eth-mac-FramesWithExcessiveDeferral # SKIP
# ok 17 ethtool_std_stats.eth-mac-BroadcastFramesXmittedOK
# ok 18 ethtool_std_stats.eth-mac-OctetsTransmittedOK
# ok 19 ethtool_std_stats.eth-mac-BroadcastFramesReceivedOK
# ok 20 ethtool_std_stats.eth-mac-OctetsReceivedOK
# ok 21 ethtool_std_stats.eth-mac-FramesTransmittedOK
# ok 22 ethtool_std_stats.eth-mac-MulticastFramesXmittedOK
# ok 23 ethtool_std_stats.eth-mac-FramesReceivedOK
# ok 24 ethtool_std_stats.eth-mac-MulticastFramesReceivedOK
# ok 25 ethtool_std_stats.pause-tx_pause_frames
# ok 26 ethtool_std_stats.pause-rx_pause_frames
# # 10 skipped test(s) detected. Consider enabling relevant config options to improve coverage.
# # Totals: pass:16 fail:0 xfail:0 xpass:0 skip:10 error:0
ok 1 selftests: drivers/net/hw: ethtool_std_stats.sh
Please note that not all MACs are counting the software injected pause
frames as real Tx pause. For example, on a LS1028ARDB the selftest
output will reflect the fact that neither the ENETC MAC, nor the Felix
switch MAC are able to detect Tx pause frames injected by software.
$ ./run_kselftest.sh -t drivers/net/hw:ethtool_std_stats.sh
(...)
# # software sent pause frames not detected
# ok 25 ethtool_std_stats.pause-tx_pause_frames # XFAIL
# ok 26 ethtool_std_stats.pause-rx_pause_frames
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260330152933.2195885-10-ioana.ciornei@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch finalizes the transition to work with a single local
interface for the ethtool_rmon.sh test. Each 'ip link' and 'ethtool'
command used by the test is annotated with the necessary run_on in
order to be executed on the necessary target system, be it local, in
another network namespace or through ssh.
Since we need NETIF up and running also for control traffic, we now
expect that the interfaces are up and running and do not touch bring
them up or down at the end of the test. This is also documented in the
drivers/net/README.rst.
The ethtool_rmon.sh script can still be used in the older fashion by
passing two interfaces as command line arguments, the only restriction
is that those interfaces need to be already up.
$ DRIVER_TEST_CONFORMANT=no ./ethtool_rmon.sh eth0 eth1
As part of the kselftest infrastructure, this test can be run in the
following manner:
$ make -C tools/testing/selftests/ TARGETS="drivers/net drivers/net/hw" \
install INSTALL_PATH=/tmp/ksft-net-drv
$ cd /tmp/ksft-net-drv/
$ cat > ./drivers/net/net.config <<EOF
NETIF=endpmac17
LOCAL_V4=17.0.0.1
REMOTE_V4=17.0.0.2
REMOTE_TYPE=ssh
REMOTE_ARGS=root@192.168.5.200
EOF
$ ./run_kselftest.sh -t drivers/net/hw:ethtool_rmon.sh
TAP version 13
1..1
# timeout set to 0
# selftests: drivers/net/hw: ethtool_rmon.sh
# TAP version 13
# 1..14
# ok 1 ethtool_rmon.rx-pkts64to64
# ok 2 ethtool_rmon.rx-pkts65to127
# ok 3 ethtool_rmon.rx-pkts128to255
# ok 4 ethtool_rmon.rx-pkts256to511
# ok 5 ethtool_rmon.rx-pkts512to1023
# ok 6 ethtool_rmon.rx-pkts1024to1518
# ok 7 ethtool_rmon.rx-pkts1519to10240
# ok 8 ethtool_rmon.tx-pkts64to64
# ok 9 ethtool_rmon.tx-pkts65to127
# ok 10 ethtool_rmon.tx-pkts128to255
# ok 11 ethtool_rmon.tx-pkts256to511
# ok 12 ethtool_rmon.tx-pkts512to1023
# ok 13 ethtool_rmon.tx-pkts1024to1518
# ok 14 ethtool_rmon.tx-pkts1519to10240
# # Totals: pass:14 fail:0 xfail:0 xpass:0 skip:0 error:0
ok 1 selftests: drivers/net/hw: ethtool_rmon.sh
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260330152933.2195885-9-ioana.ciornei@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Update the ethtool_rmon.sh test so that it uses the KTAP format for its
output. This is achieved by using the helpers found in ktap_helpers.sh.
An example output can be found below.
$ ./ethtool_rmon.sh endpmac3 endpmac4
TAP version 13
1..14
ok 1 ethtool_rmon.rx-pkts64to64
ok 2 ethtool_rmon.rx-pkts65to127
ok 3 ethtool_rmon.rx-pkts128to255
ok 4 ethtool_rmon.rx-pkts256to511
ok 5 ethtool_rmon.rx-pkts512to1023
ok 6 ethtool_rmon.rx-pkts1024to1518
ok 7 ethtool_rmon.rx-pkts1519to10240
ok 8 ethtool_rmon.tx-pkts64to64
ok 9 ethtool_rmon.tx-pkts65to127
ok 10 ethtool_rmon.tx-pkts128to255
ok 11 ethtool_rmon.tx-pkts256to511
ok 12 ethtool_rmon.tx-pkts512to1023
ok 13 ethtool_rmon.tx-pkts1024to1518
ok 14 ethtool_rmon.tx-pkts1519to10240
# Totals: pass:14 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260330152933.2195885-8-ioana.ciornei@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ethtool_rmon.sh script checks that the number of packets sent /
received during a test matches the expected value with a 1% tolerance.
Since in the next patches this test will gain the capability to also be
run on systems with a single interface where the traffic generator is
accesible through ssh, use the UINT32_MAX as the upper limit. This is
necessary since the same interface will be used also for control traffic
(the ssh commands) as well as the mausezahn generated one.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260330152933.2195885-7-ioana.ciornei@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The selftests in drivers/net are slowly transitioning to being able to
be used on systems with a single network interface. The first step for the
ethtool_rmon.sh test is to only validate that the rmon counters are
properly exported on the first interface supplied as an argument.
Remove the rmon_histogram calls which intend to test also the rmon
counters on the 2nd interface. This also removes the need for the remote
system, which should be used only to inject traffic, to also support
rmon counters.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260330152933.2195885-6-ioana.ciornei@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
