Since I am moving from Pengutronix update my email address for the
ARCNET subsystems to point to my kernel.org address.
Also update .mailmap.
Signed-off-by: Michael Grzeschik <mgr@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Markus Schneider-Pargmann <mail@markussp.com>
Link: https://patch.msgid.link/20260521-maintainer-v1-1-29b5e106682d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We X-out net/bluetooth/ from "NETWORKING [GENERAL]" so that only
the dedicated list is CCed on patches, and networking gets them
once already processed by Luiz. We missed include/net/bluetooth.
Link: https://patch.msgid.link/20260521004151.625049-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Data adjustment cases failed with "Data exchange failed" when using IPv4
because the program did not update the IP and UDP checksums in the IPv4
branch. The issue was masked when both IPv4 and IPv6 were configured,
since the test harness prefers IPv6.
While here, generalize csum_fold_helper() to fold twice so it works for
any 32-bit input.
Fixes: 0b65cfcef9 ("selftests: drv-net: Test tail-adjustment support")
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20260520153928.3371765-1-noren@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6_route_init() registers ip6_route_dev_notifier before registering the
IPv6 route BPF iterator target. If bpf_iter_register() fails after the
notifier has been registered, the error path currently jumps to
out_register_late_subsys and unwinds the RTNL handlers and pernet route
state without removing the notifier from the netdevice notifier chain.
This leaves ip6_route_dev_notify() callable after the IPv6 route state it
uses has been torn down. Add a separate unwind label for the BPF iterator
failure path and unregister the netdevice notifier before continuing with
the existing cleanup.
Fixes: 138d0be35b ("net: bpf: Add netlink and ipv6_route bpf_iter targets")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260520030329.1061183-1-dbgh9129@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The run.sh script explicitly checks that CONFIG_MODULES is disabled.
By default, this config option is enabled. Explicitly disable it to be
able to run the RDS tests.
Note that writing '# CONFIG_(...) is not set' is usually recommended to
disable an option in the .config, but it looks like selftests usually
set 'CONFIG_(...)=n', which looks clearer.
Fixes: 0f5d680047 ("selftests: rds: add tools/testing/selftests/net/rds/config")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260520-net-rds-config-modules-v1-1-2100df02fe9a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The networking receive path is usually run from softirq context, but
protocols that take the socket lock may have packets stored in the
backlog and processed later from process context. In that case
release_sock() -> __release_sock() drops the slock with spin_unlock_bh()
and then calls sk->sk_backlog_rcv() with bottom halves enabled.
Typical sk_backlog_rcv handlers process the socket whose backlog is
being drained, so the BH state at entry is irrelevant for the slocks
they touch. pep_do_rcv() is different: when the inbound skb targets an
existing PEP pipe, it forwards the skb to a different *child* socket
via sk_receive_skb(). That helper takes the child slock with
bh_lock_sock_nested(), which is just spin_lock_nested() and assumes BH
is already off. The same child slock therefore ends up acquired with
BH on (process path) and with BH off (softirq path):
process context softirq context
--------------- ---------------
release_sock(listener) __netif_receive_skb()
__release_sock() phonet_rcv()
spin_unlock_bh() __sk_receive_skb(listener)
[BH now ENABLED] [BH already disabled]
sk_backlog_rcv: sk_backlog_rcv:
pep_do_rcv() pep_do_rcv()
sk_receive_skb(child) sk_receive_skb(child)
bh_lock_sock_nested(child) bh_lock_sock_nested(child)
=> SOFTIRQ-ON-W => IN-SOFTIRQ-W
Lockdep flags this as inconsistent lock state, and it can become a real
self-deadlock if a softirq on the same CPU tries to receive to the same
child socket while its slock is held in the BH-enabled path:
WARNING: inconsistent lock state
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
(slock-AF_PHONET/1){+.?.}-{3:3}, at: __sk_receive_skb+0x1cf/0x900
__sk_receive_skb net/core/sock.c:563
sk_receive_skb include/net/sock.h:2022 [inline]
pep_do_rcv net/phonet/pep.c:675
sk_backlog_rcv include/net/sock.h:1190
__release_sock net/core/sock.c:3216
release_sock net/core/sock.c:3815
pep_sock_accept net/phonet/pep.c:879
Wrap the forwarded sk_receive_skb() in local_bh_disable() /
local_bh_enable() so the child slock is always acquired with BH off.
local_bh_disable() nests safely on the softirq path.
Discovered via in-house syzkaller fuzzing; the same root cause also
on the linux-6.1.y syzbot dashboard as extid 44f0626dd6284f02663c.
Reproduced under KASAN + LOCKDEP + PROVE_LOCKING, reproducer:
https://pastebin.com/A3t8xzCR
Fixes: 9641458d3e ("Phonet: Pipe End Point for Phonet Pipes protocol")
Link: https://syzkaller.appspot.com/bug?extid=44f0626dd6284f02663c
Cc: stable@vger.kernel.org
Signed-off-by: Zijing Yin <yzjaurora@gmail.com>
Acked-by: Rémi Denis-Courmont <remi@remlab.net>
Reported-by: syzbot+9f4a135646b66c509935@syzkaller.appspotmail.com
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260519172635.86304-1-yzjaurora@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unless smbdirect_connection_legacy_debug_proc_show()
wants to debug-log keep_alive_interval as microseconds,
a magnitude higher precision than available by the way,
keepalive_interval_msec should not be multiplied by 1000.
Fixes: cc55f65dd3 ("smb: client: make use of common smbdirect_socket_parameters")
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Since commit 340cea84f6 ("cifs: open files should not hold ref on
superblock"), cifs file only holds the dentry ref_cnt, the cifs file
close work(cfile->deferred) could be executed after unmounting, which
will trigger a warning in generic_shutdown_super:
BUG: Dentry 00000000a14a6845{i=c,n=file} still in use (1) [unmount of
cifs cifs]
The detailed processs is:
process A process B kworker
fd = open(PATH)
vfs_open
file->__f_path = *path // dentry->d_lockref.count = 1
cifs_open
cifs_new_fileinfo
cfile->dentry = dget(dentry) // dentry->d_lockref.count = 2
close(fd)
__fput
cifs_close
queue_delayed_work(deferredclose_wq, cfile->deferred)
dput(dentry) // dentry->d_lockref.count = 1
smb2_deferred_work_close
_cifsFileInfo_put
list_del(&cifs_file->flist)
umount
cleanup_mnt
deactivate_super
cifs_kill_sb
cifs_close_all_deferred_files_sb
cifs_close_all_deferred_files
// cannot find cfile, skip _cifsFileInfo_put
kill_anon_super
generic_shutdown_super
shrink_dcache_for_umount
umount_check
WARN ! // dentry->d_lockref.count = 1
cifsFileInfo_put_final
dput(cifs_file->dentry)
// dentry->d_lockref.count = 0
Fix it by flushing 'deferredclose_wq' before calling kill_anon_super.
Fetch a reproducer in https://bugzilla.kernel.org/show_bug.cgi?id=221548.
Fixes: 340cea84f6 ("cifs: open files should not hold ref on superblock")
Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix the error message in cs_amp_read_cal_coeff() to say "Failed to read".
It was incorrectly "Failed to write", probably a copy-paste error.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260521122511.987322-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rewrite cs_amp_create_debugfs() so that dput() will be called on
a valid dentry returned from debugfs_lookup().
The pointer returned from debugfs_lookup() must be released by dput().
The pointer returned from debugfs_create_dir() does not need to be
passed to dput().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: cdd27fa329 ("ASoC: cs-amp-lib: Add helpers for factory calibration")
Link: https://patch.msgid.link/20260521122511.987322-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When calculating data->count replace the incorrect sizeof(data) with use
of struct_offset().
The faulty sizeof(data) was incorrectly calculating the size of the
pointer instead of the size of the struct pointed to. As it happens, both
values are 8 on a 64-bit CPU. In the unlikely event of using this code on
a 32-bit CPU the number of available bytes would be calculated 4 larger
than is actually available.
Instead of changing to sizeof(*data) it has been replaced by
struct_offset() because it has better chance of detecting these sorts of
typos. Also the offset of the data[] array is actually what we want to know
here anyway.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2b62e66626 ("ASoC: cs-amp-lib: Add function to write calibration to UEFI")
Link: https://patch.msgid.link/20260521122511.987322-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
adm1266_state_read() backs the sequencer_state debugfs entry and
issues an i2c_smbus_read_word_data(client, ADM1266_READ_STATE)
against the device without taking pmbus_lock. pmbus_core holds
pmbus_lock around its own multi-transaction sequences (notably the
"set PAGE, then read paged register" pattern used by hwmon
attributes), so an unlocked debugfs reader can land between a PAGE
write and the subsequent paged read in another thread. READ_STATE
itself is not paged, so it cannot corrupt PAGE in flight, but the
same defensive serialisation that applies to the GPIO accessors
applies here: any direct device access from outside pmbus_core
should be ordered with respect to pmbus_core's own.
Take pmbus_lock at the top of adm1266_state_read() via the
scope-based guard().
Fixes: ed1ff457e1 ("hwmon: (pmbus/adm1266) add debugfs for states")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-8-e425e4f88139@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adm1266_nvmem_read() is the reg_read callback the NVMEM core invokes
when userspace reads /sys/bus/nvmem/devices/.../nvmem on this chip.
On the first byte of every read it does a memset of data->dev_mem,
walks the device blackbox through adm1266_nvmem_read_blackbox()
(which issues a chain of PMBus block transactions), and then memcpys
the refreshed buffer out to userspace. None of that runs under
pmbus_lock today.
Two consequences:
- The PMBus traffic the refresh issues is not serialised against
pmbus_core's own multi-step PAGE+register sequences. A paged
hwmon attribute read from another thread can land between a
PAGE write and the paged read in either direction and corrupt
one side's view of the device state machine.
- The NVMEM core does not serialise concurrent reg_read calls, so
two userspace readers racing at offset 0 can interleave the
memset of data->dev_mem with another reader's
adm1266_nvmem_read_blackbox() refill or memcpy out, returning
torn data to userspace.
Take pmbus_lock at the top of adm1266_nvmem_read() via the
scope-based guard(). Patch 5 of this series moves
adm1266_config_nvmem() past pmbus_do_probe() so the lock is
guaranteed to be live before the callback is reachable from
userspace.
Fixes: 15609d1893 ("hwmon: (pmbus/adm1266) read blackbox")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-7-e425e4f88139@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adm1266_gpio_get(), adm1266_gpio_get_multiple(), and
adm1266_gpio_dbg_show() all issue PMBus reads against the device but
none of them take pmbus_lock. The pmbus_core framework holds
pmbus_lock around its own multi-transaction sequences (notably the
"set PAGE, then read paged register" pattern used by hwmon
attributes), so an unlocked GPIO accessor can land between a PAGE
write and the subsequent paged read in another thread and corrupt
either side's view of the device state machine.
Take pmbus_lock at the top of each of the three accessors via the
scope-based guard(). The lock is uncontended in the common case and
adds only a single mutex round-trip per call.
Fixes: d98dfad35c ("hwmon: (pmbus/adm1266) Add support for GPIOs")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-6-e425e4f88139@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adm1266_probe() calls adm1266_config_nvmem() -- which goes on to
devm_nvmem_register() and exposes adm1266_nvmem_read() to userspace --
before pmbus_do_probe() has initialised the per-client PMBus state.
Same latent hazard as the gpio_chip one fixed in the previous patch:
once the nvmem device is registered, gpiolib's nvmem char-dev / sysfs
interface is reachable, and any concurrent read triggers
adm1266_nvmem_read() -> adm1266_nvmem_read_blackbox(), which issues
PMBus traffic that races pmbus_do_probe()'s own device accesses with
no serialisation.
Move adm1266_config_nvmem() down past pmbus_do_probe() so the nvmem
device isn't reachable from userspace until the PMBus state the
nvmem accessors depend on is fully initialised.
Fixes: 15609d1893 ("hwmon: (pmbus/adm1266) read blackbox")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-5-e425e4f88139@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adm1266_probe() calls adm1266_config_gpio() -- which goes on to
devm_gpiochip_add_data() and exposes the gpio_chip callbacks to
gpiolib -- before pmbus_do_probe() has initialised the per-client
PMBus state (notably the pmbus_lock mutex the core hands out via
pmbus_get_data()).
That ordering is already a latent hazard: any GPIO access that lands
between adm1266_config_gpio() and the end of pmbus_do_probe() (for
example a sysfs read from a user space agent that opens the gpiochip
the instant gpiolib advertises it) races pmbus_do_probe()'s own
device accesses with no serialisation.
Move adm1266_config_gpio() down past pmbus_do_probe() so the chip
isn't reachable from userspace until the PMBus state it depends on
is fully initialised.
Fixes: d98dfad35c ("hwmon: (pmbus/adm1266) Add support for GPIOs")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-4-e425e4f88139@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adm1266_gpio_get() and adm1266_gpio_get_multiple() both compose the
pin-status word as
pins_status = read_buf[0] + (read_buf[1] << 8);
right after i2c_smbus_read_block_data(), guarding only against an
error return. A well-behaved device returns 2 bytes for
GPIO_STATUS/PDIO_STATUS, but the helper happily reports a 0- or
1-byte response too. If the device returns 0 bytes, both read_buf
slots are uninitialized stack memory; if it returns 1 byte, read_buf[1]
is.
The composed value then flows through set_bit() into the caller's
*bits in adm1266_gpio_get_multiple(), or into the return value of
adm1266_gpio_get(), and ends up in userspace via gpiolib (sysfs and
the char-dev ioctls). That leaks a few bits of kernel stack per
request on any device whose firmware glitch, bus error, or hostile
slave produces a short block-read response.
Add the missing length check to both call sites and surface a short
response as -EIO.
Fixes: d98dfad35c ("hwmon: (pmbus/adm1266) Add support for GPIOs")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-3-e425e4f88139@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adm1266_gpio_get_multiple() zeroes *bits before the GPIO_STATUS loop
and then a second time before the PDIO_STATUS loop:
*bits = 0;
for_each_set_bit(gpio_nr, mask, ADM1266_GPIO_NR) {
...
set_bit(gpio_nr, bits);
}
ret = i2c_smbus_read_block_data(data->client, ADM1266_PDIO_STATUS, ...);
...
*bits = 0;
for_each_set_bit_from(gpio_nr, mask, ADM1266_GPIO_NR + ADM1266_PDIO_NR) {
...
set_bit(gpio_nr, bits);
}
The second *bits = 0 throws away every GPIO bit the first loop just
populated, so callers asking for any combination of GPIO and PDIO
pins always see the GPIO portion of the returned bits as zero.
Drop the redundant second assignment so both halves of the result
survive.
Fixes: d98dfad35c ("hwmon: (pmbus/adm1266) Add support for GPIOs")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-2-e425e4f88139@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adm1266_gpio_get_multiple() iterates the PDIO portion of the
caller-supplied mask using
for_each_set_bit_from(gpio_nr, mask,
ADM1266_GPIO_NR + ADM1266_PDIO_STATUS) {
...
}
where ADM1266_PDIO_STATUS is the PMBus command code (0xE9, i.e. 233),
not the number of PDIO pins. The intended upper bound is
ADM1266_GPIO_NR + ADM1266_PDIO_NR = 25.
gpiolib hands in a mask sized for gc.ngpio (= 25 bits on this chip),
so the iteration walks find_next_bit() up to 242, reading up to 217
extra bits (a handful of unsigned-long words: four on 64-bit, seven
on 32-bit) of whatever lives past the end of the mask in the
caller's stack. Any incidental set bit in that range then drives a
set_bit(gpio_nr, bits) call that writes past the end of the
caller-supplied bits array too -- both out-of-bounds.
Substitute ADM1266_PDIO_NR for the constant so the scan stops at the
last real PDIO bit.
Fixes: d98dfad35c ("hwmon: (pmbus/adm1266) Add support for GPIOs")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-1-e425e4f88139@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adm1266_pmbus_block_xfer() copies the device-supplied block payload
into the caller-provided buffer using the device-supplied length:
memcpy(data_r, &msgs[1].buf[1], msgs[1].buf[0]);
The helper does not know how large data_r is and trusts the device to
return at most one record's worth of bytes. adm1266_nvmem_read_blackbox()
violates that contract: it advances read_buff inside data->dev_mem in
ADM1266_BLACKBOX_SIZE (64-byte) strides while the helper is willing to
write up to ADM1266_PMBUS_BLOCK_MAX (255) bytes. A device that returns
more than 64 bytes on the trailing record (read_buff offset 1984 in
the 2048-byte dev_mem allocation) overflows dev_mem by up to 191 bytes
before the post-call
if (ret != ADM1266_BLACKBOX_SIZE)
return -EIO;
can reject the response.
Contain the fix in the caller without changing the helper signature:
read each record into a 255-byte local bounce buffer that matches the
helper's maximum output, validate the returned length, and only then
copy exactly ADM1266_BLACKBOX_SIZE bytes into the dev_mem slot.
Fixes: 407dc802a9 ("hwmon: (pmbus/adm1266) Add Block process call")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Link: https://lore.kernel.org/r/20260515-adm1266-fixes-v1-5-1c1ea1349cfe@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Platforms that fit more than one ADM1266 on different I2C buses at
the same 7-bit slave address (a common shelf-management pattern,
e.g. one device per power domain) end up with duplicate GPIO line
labels because the existing format only includes the slave address.
Including the adapter number disambiguates them.
The adapter number is formatted as decimal to match the i2c-N
convention used elsewhere in Linux (sysfs paths, dev nodes); the
slave address keeps its conventional hexadecimal form.
The label is purely informational (visible via gpioinfo and the
gpiochip /sys/class/gpio name); no DT or ABI consumer parses it.
Fixes: d98dfad35c ("hwmon: (pmbus/adm1266) Add support for GPIOs")
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Link: https://lore.kernel.org/r/20260512-adm1266-v3-5-a81a479b0bb0@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In xe_oa_stream_open_ioctl(), when param.exec_q->width > 1 the
function returns -EOPNOTSUPP directly, skipping the existing
err_exec_q cleanup path. The exec_queue reference obtained by
xe_exec_queue_lookup() is leaked.
The exec queue holds a reference on the xe_file, which is only
dropped during queue teardown. The leaked lookup ref is not on
the file's exec_queue xarray, so file close cannot release it.
This keeps both the exec queue and the file private state pinned
indefinitely.
Jump to err_exec_q instead of returning directly so the reference
is released.
Fixes: f0ed39830e ("xe/oa: Fix query mode of operation for OAR/OAC")
Assisted-by: Claude:claude-opus-4.6
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20260514203210.593488-1-shuicheng.lin@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
(cherry picked from commit 339fa0be9e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
adm1266_pmbus_block_xfer() sets up the read transaction with
.buf = data->read_buf,
.len = ADM1266_PMBUS_BLOCK_MAX + 2,
but read_buf in struct adm1266_data is declared as
u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1];
For a max-length block response (length byte = 255 + up to 1 PEC
byte), the i2c controller is told to write 257 bytes into a 256-byte
buffer, putting one byte past the end of read_buf. The same response
also makes the subsequent PEC compare
if (crc != msgs[1].buf[msgs[1].buf[0] + 1])
read a byte beyond the array.
Bump the read_buf declaration to ADM1266_PMBUS_BLOCK_MAX + 2 so the
buffer can hold the length byte, up to 255 payload bytes, and the PEC
byte the i2c_msg length already accounts for.
Fixes: 407dc802a9 ("hwmon: (pmbus/adm1266) Add Block process call")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Link: https://lore.kernel.org/r/20260515-adm1266-fixes-v1-4-1c1ea1349cfe@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adm1266_nvmem_read_blackbox() loops over a record_count that comes
straight from byte 3 of the BLACKBOX_INFO response. The destination
buffer is data->dev_mem, sized for the nvmem cell's declared 2048
bytes (ADM1266_BLACKBOX_MAX_RECORDS * ADM1266_BLACKBOX_SIZE = 32 * 64).
A device that reports a record_count greater than 32 -- whether due
to firmware bugs, bus corruption, or a non-responsive slave returning
0xff -- would walk read_buff past the end of the dev_mem allocation
on the trailing iterations.
Cap record_count at ADM1266_BLACKBOX_MAX_RECORDS (introduced here)
before entering the loop and return -EIO on any larger value, so a
malformed BLACKBOX_INFO response cannot drive the loop out of bounds.
Fixes: 15609d1893 ("hwmon: (pmbus/adm1266) read blackbox")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Link: https://lore.kernel.org/r/20260515-adm1266-fixes-v1-3-1c1ea1349cfe@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adm1266_nvmem_read_blackbox() declares a 5-byte stack buffer and
passes it to i2c_smbus_read_block_data() to retrieve the 4-byte
BLACKBOX_INFO response. i2c_smbus_read_block_data() does not honour
caller buffer sizes -- it memcpy()s data.block[0] bytes from the
SMBus transaction (where data.block[0] is the length byte returned by
the slave device, up to I2C_SMBUS_BLOCK_MAX = 32):
memcpy(values, &data.block[1], data.block[0]);
If the device returns any block length above 5, the call overflows
the caller's 5-byte stack buffer before the post-call
if (ret != 4)
return -EIO;
check has a chance to reject the response.
Widen the local buffer to I2C_SMBUS_BLOCK_MAX so the helper has room
for any well-formed SMBus block response, matching the convention used
by the other i2c_smbus_read_block_data() callers in this driver.
Fixes: 15609d1893 ("hwmon: (pmbus/adm1266) read blackbox")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Link: https://lore.kernel.org/r/20260515-adm1266-fixes-v1-2-1c1ea1349cfe@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adm1266_set_rtc() seeds the chip's SET_RTC register from
ktime_get_seconds(), which returns CLOCK_MONOTONIC -- i.e. seconds
since the host last booted, not seconds since the Unix epoch.
The chip stamps that value into every blackbox record it captures.
Userspace reading those timestamps back expects wall-clock seconds:
that's what the SET_RTC frame layout documents (datasheet Rev. D,
Table 84) and what every other consumer of "seconds since epoch"
assumes. Seeding from CLOCK_MONOTONIC gives blackbox records a
timestamp that is only meaningful within a single boot of the host
and silently resets to small values on every reboot.
Switch to ktime_get_real_seconds() so the seed matches what the
register is documented to hold.
Fixes: 15609d1893 ("hwmon: (pmbus/adm1266) read blackbox")
Cc: stable@vger.kernel.org
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Link: https://lore.kernel.org/r/20260515-adm1266-fixes-v1-1-1c1ea1349cfe@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The EC signature check uses && instead of || between the four
byte comparisons. With &&, the condition is true only when ALL
four bytes fail to match simultaneously, meaning the driver
accepts a device as a valid Microchip EC if ANY single byte of
the 4-byte "MCHP" signature happens to match.
Due to short-circuit evaluation, if the first byte reads back as
'M' (0x4D, a very common register value), the remaining three
comparisons are skipped entirely and the device is accepted.
Change && to || so the check rejects devices that do not fully
match the expected EC signature, as originally intended.
Fixes: 70118f85e6 ("hwmon: Add EC Chip driver for Lenovo ThinkStation motherboards")
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Kean Ren <rh_king@163.com>
Link: https://lore.kernel.org/r/20260521035228.533317-3-rh_king@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Replace manual request_region()/release_region() with
devm_request_region(). This lets the device-managed framework
handle I/O region lifetime automatically and fixes:
- A double release_region() when probe fails after acquiring the
I/O region: the probe error path releases it, and then
lenovo_ec_init() releases it again on the same error path.
- A release-after-use window in lenovo_ec_exit() where
release_region() was called before platform_device_unregister(),
leaving the hwmon device active with a released I/O region.
- Missing release_region() in lenovo_ec_probe() if
devm_hwmon_device_register_with_info() fails.
Remove all four manual release_region() calls that are now handled
automatically and replace request_region with
devm_request_region, use dev_err replace pr_err.
Also remove the now-unnecessary braces around the single-statement
if body.
Fixes: 70118f85e6 ("hwmon: Add EC Chip driver for Lenovo ThinkStation motherboards")
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Kean Ren <rh_king@163.com>
Link: https://lore.kernel.org/r/20260521035228.533317-2-rh_king@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use flush_work() instead of cancel_work_sync() to terminate pending IRQ
work in cs35l56_sdw_remove(). And flush_work() again after masking the
interrupts to flush any queueing that was racing with the masking. This is
the same sequence as cs35l56_sdw_system_suspend().
cs35l56_sdw_interrupt() takes the pm_runtime to prevent the bus powering-
down before the interrupt status can be read and handled. The work releases
this pm_runtime. So cancelling it, instead of flushing, could leave an
unbalanced pm_runtime.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://patch.msgid.link/20260521123057.988732-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit feee6b2989 ("mm/memory_hotplug: shrink zones when
offlining memory"), __remove_pages() doesn't need the "zone" parameter
so the "page" variable is also unused. Remove the unused code to avoid
such build warning:
arch/loongarch/mm/init.c: In function 'arch_remove_memory':
arch/loongarch/mm/init.c:134:22: warning: variable 'page' set but not used [-Wunused-but-set-variable=]
134 | struct page *page = pfn_to_page(start_pfn);
Cc: <stable@vger.kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Validate the relocation address against the initrd region specified via
"initrd=" or "initrdmem=" on the command line. Reject relocation targets
that overlap the initrd to prevent memory corruption during early boot.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When the kernel is relocated during early boot (efistub or kexec_file),
a randomized load address may has already been selected and applied. In
this case, performing KASLR again in relocate.c is unnecessary.
Note: strictly-defined KASLR means the kernel's final runtime address
has a random offset from the kernel's load address, which is implemented
in relocate.c; broadly-defined KALSR means the kernel's final runtime
address has a random offset from the kernel's link address (a.k.a.
VMLINUX_LOAD_ADDRESS), which also include the efistlub implementation,
kexec_file implementation and QEMU direct kernel boot. kaslr_disabled()
return true only means strictly-defined KASLR is disabled.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Introduce efi_get_kimg_kaslr_address() helper to compute the preferred
kernel image load address dynamically when CONFIG_RANDOMIZE_BASE is
enabled. The function derives a random offset by using the EFI-provided
randomness combined with the timer tick value, and constrains it within
CONFIG_RANDOMIZE_BASE_MAX_OFFSET.
Update EFI_KIMG_PREFERRED_ADDRESS to call this helper so that the EFI
stub can select a randomized load address when KASLR is active, while
preserving the original base address behavior when KASLR is disabled or
"nokaslr" is specified.
Note: LoongArch can't KASLR for hibernation, so set efi_nokaslr to true
if "resume=<devname>" is explicitly specified in cmdline.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
As the output file is currently never created, the check will run every
time, even if the inputs have not changed.
Create an empty output file which allows make to skip the execution when
it is not necessary.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260520-tracing-ringbuffer-check-v1-1-d979cfab1338@weissschuh.net
Fixes: 1211907ac0 ("tracing: Generate undef symbols allowlist for simple_ring_buffer")
Fixes: 58b4bd1839 ("tracing: Adjust cmd_check_undefined to show unexpected undefined symbols")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The unload_page callback expects the return value of load_page() as its
argument: ret = load_page(va); unload(ret). Fix the rollback code in
simple_ring_buffer_init_mm() where the descriptor's VA is used instead
of the loaded page address.
Link: https://patch.msgid.link/20260512141614.1759430-1-vdonnefort@google.com
Fixes: 635923081c ("tracing: load/unload page callbacks for simple_ring_buffer")
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
nr_subbufs in the ring buffer metadata is always initialized to zero
because it is assigned from cpu_buffer->nr_pages before the page
initialization loop has run. While nr_subbufs is not currently read
by the kernel, it should reflect the actual buffer geometry in the
meta page for correctness.
Move the assignment after the page loop so that cpu_buffer->nr_pages
holds the final count.
Link: https://patch.msgid.link/20260512135420.99194-1-devnexen@gmail.com
Fixes: 34e5b958bd ("tracing: Introduce simple_ring_buffer")
Reviewed-by: Vincent Donnefort <vdonnefort@google.com>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On real hardware, panic and machine reboot may not flush hardware cache
to memory. This means the persistent ring buffer, which relies on a
coherent state of memory, may not have its events written to the buffer
and they may be lost. Moreover, there may be inconsistency with the
counters which are used for validation of the integrity of the
persistent ring buffer which may cause all data to be discarded.
To avoid this issue, stop recording of the ring buffer on panic and
flush the cache of the ring buffer's memory.
Fixes: e645535a95 ("tracing: Add option to use memmapped memory for trace boot instance")
Cc: stable@vger.kernel.org
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ian Rogers <irogers@google.com>
Link: https://patch.msgid.link/177751969602.2136606.12031934362587643488.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When tracing is active while reading the trace file, if the iterator
reading the buffer detects that the writer has passed the iterator head,
it will reset and set a "missed events" flag. This flag is passed to the
output processing to show the user that events were missed:
CPU:4 [LOST EVENTS]
The problem is that the flag is reset after it is checked in
ring_buffer_iter_dropped(). But the "trace" file iterates over all the CPU
ring buffers and it will check if they are dropped when figuring out which
buffer to print next. This prematurely clears the missed_events flag if
the CPU buffer with the missed events is not the one that is printed next.
On the iteration where the CPU buffer with the missed events is printed,
the check if it had missed events would return false and the output does
not show that events were missed.
Do not reset the missed_events flag when checking if there were missed
events, but instead clear it when moving the iterator head to the next
event.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260520220801.4fd09d13@fedora
Fixes: c9b7a4a72f ("ring-buffer/tracing: Have iterator acknowledge dropped events")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When a buffer is freed either by LRU eviction or because it is unset,
the lockref is marked as dead instantly, which prevents the buffer from
being used after finding it in the buffer hash in xfs_buf_lookup and
xfs_buf_find_insert. But the latter will then not add the new buffer to
the hash because it already found an existing buffer.
Fix this using in two places: Remove the buffer from the hash before
marking the lockref dead so that that no buffer with a dead lockref can
be found in the hash, but if we find one in xfs_buf_find_insert due to
store reordering, handle this case correctly instead of returning an
unhashed buffer.
Fixes: 67fe430397 ("xfs: don't keep a reference for buffers on the LRU")
Reported-by: Andrey Albershteyn <aalbersh@redhat.com>
Reported-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andrey Albershteyn <aalbersh@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
After commit 059b7dbd20 ("vsock/virtio: fix potential unbounded skb
queue"), virtio_transport_inc_rx_pkt() subtracts per-skb overhead from
buf_alloc when checking whether a new packet fits. This reduces the
effective receive buffer below what the user configured via
SO_VM_SOCKETS_BUFFER_SIZE, causing legitimate data packets to be
silently dropped and applications that rely on the full buffer size
to deadlock.
Also, the reduced space is not communicated to the remote peer, so
its credit calculation accounts more credit than the receiver will
actually accept, causing data loss (there is no retransmission).
With this approach we currently have failures in
tools/testing/vsock/vsock_test.c. Test 18 sometimes fails, while
test 22 always fails in this way:
18 - SOCK_STREAM MSG_ZEROCOPY...hash mismatch
22 - SOCK_STREAM virtio credit update + SO_RCVLOWAT...send failed:
Resource temporarily unavailable
Fix by allowing at most `buf_alloc * 2` as the total budget for payload
plus skb overhead in virtio_transport_inc_rx_pkt(), similar to how
SO_RCVBUF is doubled to reserve space for sk_buff metadata.
This preserves the full buf_alloc for payload under normal operation,
while still bounding the skb queue growth.
With this patch, all tests in tools/testing/vsock/vsock_test.c are
now passing again.
Fixes: 059b7dbd20 ("vsock/virtio: fix potential unbounded skb queue")
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260518090656.134588-3-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When there is no more space to queue an incoming packet, the packet is
silently dropped. This causes data loss without any notification to
either peer, since there is no retransmission.
Under normal circumstances, this should never happen. However, it could
happen if the other peer doesn't respect the credit, or if the skb
overhead, which we recently began to take into account with commit
059b7dbd20 ("vsock/virtio: fix potential unbounded skb queue"),
is too high.
Fix this by resetting the connection and setting the local socket error
to ENOBUFS when virtio_transport_recv_enqueue() can no longer queue a
packet, so both peers are explicitly notified of the failure rather than
silently losing data.
Fixes: ae6fcfbf5f ("vsock/virtio: discard packets if credit is not respected")
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260518090656.134588-2-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ranjani no longer works on Intel/SOF audio drivers and her email address
now bounce due to her departure from Intel.
Unfortunately, she was not able to send the removal mail by herself.
Thanks for the years of work and dedication, Ranjani!
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Jyri Sarha <jyri.sarha@linux.intel.com>
Link: https://patch.msgid.link/20260520140001.1375-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On error we free aggr->lookups->dev_id before removing the entry from
the lookup table. If a concurrent thread calls gpiod_find() before we
remove the entry, it could iterate over the list and call
gpiod_match_lookup_table() which unconditionally dereferences dev_id
when calling strcmp(). Reverse the order of cleanup.
Fixes: 86f162e73d ("gpio: aggregator: introduce basic configfs interface")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260520084911.27938-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
