Add ip30_defconfig derived from ip27_defconfig to ensure this
target is build tested by various kernel testing projects.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Regenerate defconfig to include some drivers that are used
by this platform, including sm712fb, simplefb, rtl8187.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The LiteX framework provides a convenient and efficient infrastructure
to create FPGA Cores/SoCs.
We have implemented LiteX support for a couple of opensource MIPS
CPU cores including microAptiv UP from MIPS, GS232 from Loongson,
and CDIM from CQU.
For this platform, devicetree is generated by litex python scripts
so there is no devicetree addition necessary.
Link: https://github.com/enjoy-digital/litex/pull/1990
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
All MIPS64R6 cores so far supports MSA and vz, so it makes sense
to enable them in 64R6 default config.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fallback march for SB1 should be mips64 instead of mips64r1.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407111851.LwDasTcp-lkp@intel.com/
Fixes: bfc0a330c1 ("MIPS: Fallback CPU -march flag to ISA level if unsupported")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Make sure to set encapsulated control flags also for non-IP
packets, such that it's possible to allow matching on e.g.
TUNNEL_OAM on a geneve packet carrying a non-IP packet.
Suggested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20240713021911.1631517-13-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that TCA_FLOWER_KEY_ENC_FLAGS is unused, as it's
former data is stored behind TCA_FLOWER_KEY_ENC_CONTROL,
then remove the last bits of FLOW_DISSECTOR_KEY_ENC_FLAGS.
FLOW_DISSECTOR_KEY_ENC_FLAGS is unreleased, and have been
in net-next since 2024-06-04.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20240713021911.1631517-12-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Describe key-enc-flags and key-enc-flags-mask.
These are defined similarly to key-flags and key-flags-mask.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20240713021911.1631517-11-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch changes how TCA_FLOWER_KEY_ENC_FLAGS is used, so that
it is used with TCA_FLOWER_KEY_FLAGS_* flags, in the same way as
TCA_FLOWER_KEY_FLAGS is currently used.
Where TCA_FLOWER_KEY_FLAGS uses {key,mask}->control.flags, then
TCA_FLOWER_KEY_ENC_FLAGS now uses {key,mask}->enc_control.flags,
therefore {key,mask}->enc_flags is now unused.
As the generic fl_set_key_flags/fl_dump_key_flags() is used with
encap set to true, then fl_{set,dump}_key_enc_flags() is removed.
This breaks unreleased userspace API (net-next since 2024-06-04).
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20240713021911.1631517-10-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare to set and dump the tunnel flags.
This code won't see any of these flags yet, as these flags
aren't allowed by the NLA_POLICY_MASK, and the functions
doesn't get called with encap set to true yet.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20240713021911.1631517-9-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set the new FLOW_DIS_F_TUNNEL_* encapsulated control flags, based
on if their counter-part is set in tun_flags.
These flags are not userspace visible yet, as the code to dump
encapsulated control flags will first be added, and later activated
in the following patches.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20240713021911.1631517-8-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename skb_flow_dissect_set_enc_addr_type() to
skb_flow_dissect_set_enc_control(), and make it set both
addr_type and flags in FLOW_DISSECTOR_KEY_ENC_CONTROL.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20240713021911.1631517-7-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This policy guards fl_set_key_flags() from seeing flags
not used in the context of TCA_FLOWER_KEY_FLAGS.
In order For the policy check to be performed with the
correct endianness, then we also needs to change the
attribute type to NLA_BE32 (Thanks Davide).
TCA_FLOWER_KEY_FLAGS{,_MASK} already has a be32 comment
in include/uapi/linux/pkt_cls.h.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20240713021911.1631517-6-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare fl_set_key_flags/fl_dump_key_flags() for use with
TCA_FLOWER_KEY_ENC_FLAGS{,_MASK}.
This patch adds an encap argument, similar to fl_set_key_ip/
fl_dump_key_ip(), and determine the flower keys based on the
encap argument, and use them in the rest of the two functions.
Since these functions are so far, only called with encap set false,
then there is no functional change.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20240713021911.1631517-5-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Define new TCA_FLOWER_KEY_FLAGS_* flags for use in struct
flow_dissector_key_control, covering the same flags as
currently exposed through TCA_FLOWER_KEY_ENC_FLAGS.
Put the new flags under FLOW_DIS_F_*. The idea is that we can
later, move the existing flags under FLOW_DIS_F_* as well.
The ynl flag names have been taken from the RFC iproute2 patch.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20240713021911.1631517-4-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Describe the flower control flags, and use them
for key-flags and key-flags-mask.
The flag names have been taken from iproute2.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20240713021911.1631517-3-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Redefine the flower control flags as an enum, so they are
included in BTF info.
Make the kernel-side enum a more explicit superset of
TCA_FLOWER_KEY_FLAGS_*, new flags still need to be added to
both enums, but at least the bit position only has to be
defined once.
FLOW_DIS_ENCAPSULATION is never set for mask, so it can't be
exposed to userspace in an unsupported flags mask error message,
so it will be placed one bit position above the last uAPI flag.
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/20240713021911.1631517-2-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge arm64 support for proper 'unsafe' user accessor functionality,
with 'asm goto' for handling exceptions.
The arm64 user access code used the slow fallback code for the user
access code, which generates horrendous code for things like
strncpy_from_user(), because it causes us to generate code for SW PAN
and for range checking for every individual word.
Teach arm64 about 'user_access_begin()' and the so-called 'unsafe' user
access functions that take an error label and use 'asm goto' to make all
the exception handling be entirely out of line.
[ These user access functions are called 'unsafe' not because the
concept is unsafe, but because the low-level accessor functions
absolutely have to be protected by the 'user_access_begin()' code,
because that's what does the range checking.
So the accessor functions have that scary name to make sure people
don't think they are usable on their own, and cannot be mis-used the
way our old "double underscore" versions of __get_user() and friends
were ]
The "(early part)" of the branch is because the full branch also
improved on the "access_ok()" function, but the exact semantics of TBI
(top byte ignore) have to be discussed before doing that part. So this
just does the low-level accessor update to use "asm goto".
* 'arm64-uaccess' (early part):
arm64: start using 'asm goto' for put_user()
arm64: start using 'asm goto' for get_user() when available
Commit d5940c60e0 ("kbuild: deb-pkg improve maintainer address
generation") supported the "name <email>" form for DEBEMAIL, with
behavior slightly different from devscripts.
In Kbuild, if DEBEMAIL is given in the form "name <email>", it is used
as-is, and DEBFULLNAME is ignored.
In contrast, debchange takes the name from DEBFULLNAME (or NAME) if set,
as described in 'man debchange':
If this variable has the form "name <email>", then the maintainer name
will also be taken from here if neither DEBFULLNAME nor NAME is set.
This commit removes support for the "name <email> form for DEBEMAIL,
as the current behavior is already different from debchange, and the
Debian manual suggests setting the email address and name separately in
DEBEMAIL and DEBFULLNAME. [1]
If there are any complaints about this removal, we can re-add it,
with better alignment with the debchange implementation. [2]
[1]: https://www.debian.org/doc/manuals/debmake-doc/ch03.en.html#email-setup
[2]: https://salsa.debian.org/debian/devscripts/-/blob/v2.23.7/scripts/debchange.pl#L802
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Commit edec611db0 ("kbuild, deb-pkg: improve maintainer
identification") added the EMAIL and NAME environment variables.
Commit d5940c60e0 ("kbuild: deb-pkg improve maintainer address
generation") removed support for NAME, but kept support for EMAIL.
The EMAIL and NAME environment variables are supported by some tools
(see 'man debchange'), but not by all.
We should support both of them, or neither of them. We should not stop
halfway.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Improve the error messages and clean up redundant code.
[1] remove redundant next_sym->name checks
If 'next_sym' is a choice, the first 'if' block is executed. In the
subsequent 'else if' blocks, 'next_sym" is not a choice, hence
next_sym->name is not NULL.
[2] remove redundant sym->name checks
A choice is never selected or implied by anyone because it has no name
(it is syntactically impossible). If it is, sym->name is not NULL.
[3] Show the location of choice instead of "<choice>"
"part of choice <choice>" does not convey useful information. Since a
choice has no name, it is more informative to display the file name and
line number.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Kconfig detects recursive dependencies in a choice block, but the error
message is unclear.
[Test Code]
choice
prompt "choose"
depends on A
config A
bool "A"
config B
bool "B"
endchoice
[Result]
Kconfig:1:error: recursive dependency detected!
Kconfig:1: choice <choice> contains symbol A
Kconfig:5: symbol A is part of choice <choice>
For a resolution refer to Documentation/kbuild/kconfig-language.rst
subsection "Kconfig recursive dependency limitations"
The phrase "contains symbol A" does not accurately describe the problem.
The issue is that the choice depends on A, which is a member of itself.
The first if-block does not print a sensible message. Remove it.
This commit improves the error message to:
Kconfig:1:error: recursive dependency detected!
Kconfig:1: symbol <choice> symbol is visible depending on A
Kconfig:5: symbol A is part of choice <choice>
For a resolution refer to Documentation/kbuild/kconfig-language.rst
subsection "Kconfig recursive dependency limitations"
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
A choice member must not depend on another member within the same choice
block.
Kconfig detects this, but the error message is not sensible.
[Test Code]
choice
prompt "choose"
config A
bool "A"
depends on B
config B
bool "B"
endchoice
[Result]
Kconfig:1:error: recursive dependency detected!
Kconfig:1: choice <choice> contains symbol A
Kconfig:4: symbol A is part of choice B
Kconfig:8: symbol B is part of choice <choice>
For a resolution refer to Documentation/kbuild/kconfig-language.rst
subsection "Kconfig recursive dependency limitations"
The phrase "part of choice B" is weird because B is not a choice block,
but a choice member.
To determine whether the current symbol is a part of a choice block,
sym_is_choice(next_sym) must be checked.
This commit improves the error message to:
Kconfig:1:error: recursive dependency detected!
Kconfig:1: choice <choice> contains symbol A
Kconfig:4: symbol A symbol is visible depending on B
Kconfig:8: symbol B is part of choice <choice>
For a resolution refer to Documentation/kbuild/kconfig-language.rst
subsection "Kconfig recursive dependency limitations"
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When a prompt is followed by "if <expr>", the symbol is configurable
when the if-conditional evaluates to true.
A typical usage is as follows:
menuconfig BLOCK
bool "Enable the block layer" if EXPERT
default y
When EXPERT=n, the prompt is hidden, but this config entry is still
active, and BLOCK is set to its default value 'y'. When EXPERT=y, the
prompt is shown, making BLOCK a user-configurable option.
This usage is common throughout the kernel tree, but it has never worked
within a choice block.
[Test Code]
config EXPERT
bool "Allow expert users to modify more options"
choice
prompt "Choose" if EXPERT
config A
bool "A"
config B
bool "B"
endchoice
[Result]
# CONFIG_EXPERT is not set
When the prompt is hidden, the choice block should produce the default
without asking for the user's preference. Hence, the output should be:
# CONFIG_EXPERT is not set
CONFIG_A=y
# CONFIG_B is not set
Removing unnecessary hacks fixes the issue.
This commit also changes the behavior of 'select' by choice members.
[Test Code 2]
config MODULES
def_bool y
modules
config DEP
def_tristate m
if DEP
choice
prompt "choose"
config A
bool "A"
select C
endchoice
config B
def_bool y
select D
endif
config C
tristate
config D
tristate
The current output is as follows:
CONFIG_MODULES=y
CONFIG_DEP=m
CONFIG_A=y
CONFIG_B=y
CONFIG_C=y
CONFIG_D=m
With this commit, the output will be changed as follows:
CONFIG_MODULES=y
CONFIG_DEP=m
CONFIG_A=y
CONFIG_B=y
CONFIG_C=m
CONFIG_D=m
CONFIG_C will be changed to 'm' because 'select C' will inherit the
dependency on DEP, which is 'm'.
This change is aligned with the behavior of 'select' outside a choice
block; 'select D' depends on DEP, therefore D is selected by (B && DEP).
Note:
With this commit, allmodconfig will set CONFIG_USB_ROLE_SWITCH to 'm'
instead of 'y'. I did not see any build regression with this change.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
While Documentation/kbuild/kconfig-language.rst provides a brief
explanation, there are recurring confusions regarding the usage of a
prompt followed by 'if <expr>'. This conditional controls _only_ the
prompt.
A typical usage is as follows:
menuconfig BLOCK
bool "Enable the block layer" if EXPERT
default y
When EXPERT=n, the prompt is hidden, but this config entry is still
active, and BLOCK is set to its default value 'y'. This is reasonable
because you are likely want to enable the block device support. When
EXPERT=y, the prompt is shown, allowing you to toggle BLOCK.
Please note that it is different from 'depends on EXPERT', which would
enable and disable the entire config entry.
However, this conditional prompt has never worked in a choice block.
The following two work in the same way: when EXPERT is disabled, the
choice block is entirely disabled.
[Test Code 1]
choice
prompt "choose" if EXPERT
config A
bool "A"
config B
bool "B"
endchoice
[Test Code 2]
choice
prompt "choose"
depends on EXPERT
config A
bool "A"
config B
bool "B"
endchoice
I believe the first case should hide only the prompt, producing the
default:
CONFIG_A=y
# CONFIG_B is not set
The next commit will change (fix) the behavior of the conditional prompt
in choice blocks.
I see several choice blocks wrongly using a conditional prompt, where
'depends on' makes more sense.
To preserve the current behavior, this commit converts such misuses.
I did not touch the following entry in arch/x86/Kconfig:
choice
prompt "Memory split" if EXPERT
default VMSPLIT_3G
This is truly the correct use of the conditional prompt; when EXPERT=n,
this choice block should silently select the reasonable VMSPLIT_3G,
although the resulting PAGE_OFFSET will not be affected anyway.
Presumably, the one in fs/jffs2/Kconfig is also correct, but I converted
it to 'depends on' to avoid any potential behavioral change.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
E_LIST was preveously used to form an expression tree consisting of
choice members.
It is no longer used.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
P_CHOICE is a pseudo property used to link a choice with its members.
There is no more code relying on this, except for some debug code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Choices and their members are associated via the P_CHOICE property.
Currently, prop_get_symbol(sym_get_choice_prop()) is used to obtain
the choice of the given choice member.
Replace it with sym_get_choice_menu(), which retrieves the choice
without relying on P_CHOICE.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Choices and their members are associated via the P_CHOICE property.
Currently, prop_get_symbol(sym_get_choice_prop()) is used to obtain
the choice of the given choice member.
Replace it with sym_get_choice_menu(), which retrieves the choice
without relying on P_CHOICE.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Choices and their members are associated via the P_CHOICE property.
Currently, prop_get_symbol(sym_get_choice_prop()) is used to obtain
the choice of the given choice member.
Replace it with sym_get_choice_menu(), which retrieves the choice
without relying on P_CHOICE.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Choices and their members are associated via the P_CHOICE property.
Currently, sym_get_choice_prop() and expr_list_for_each_sym() are
used to iterate on choice members.
Replace them with menu_for_each_sub_entry(), which achieves the same
without relying on P_CHOICE.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
sym_get_choice_value(menu->sym) is equivalent to sym_calc_choice(menu).
Convert all call sites of sym_get_choice_value() and then remove it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Handling choices has always been in a PITA in Kconfig.
For example, fixes and reverts were repeated for randconfig with
KCONFIG_ALLCONFIG:
- 422c809f03 ("kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG")
- 23a5dfdad2 ("Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG"")
- 8357b48549 ("kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG")
- 490f161711 ("Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG"")
As these commits pointed out, randconfig does not randomize choices when
KCONFIG_ALLCONFIG is used. This issue still remains.
[Test Case]
choice
prompt "choose"
config A
bool "A"
config B
bool "B"
endchoice
$ echo > all.config
$ make KCONFIG_ALLCONFIG=1 randconfig
The output is always as follows:
CONFIG_A=y
# CONFIG_B is not set
Not only randconfig, but other all*config variants are also broken with
KCONFIG_ALLCONFIG.
With the same Kconfig,
$ echo '# CONFIG_A is not set' > all.config
$ make KCONFIG_ALLCONFIG=1 allyesconfig
You will get this:
CONFIG_A=y
# CONFIG_B is not set
This is incorrect because it does not respect all.config.
The correct output should be:
# CONFIG_A is not set
CONFIG_B=y
To handle user inputs more accurately, this commit refactors the code
based on the following principles:
- When a user value is given, Kconfig must set it immediately.
Do not defer it by setting SYMBOL_NEED_SET_CHOICE_VALUES.
- The SYMBOL_DEF_USER flag must not be cleared, unless a new config
file is loaded. Kconfig must not forget user inputs.
In addition, user values for choices must be managed with priority.
If user inputs conflict within a choice block, the newest value wins.
The values given by randconfig have lower priority than explicit user
inputs.
This commit implements it by using a linked list. Every time a choice
block gets a new input, it is moved to the top of the list.
Let me explain how it works.
Let's say, we have a choice block that consists of five symbols:
A, B, C, D, and E.
Initially, the linked list looks like this:
A(=?) --> B(=?) --> C(=?) --> D(=?) --> E(=?)
Suppose randconfig is executed with the following KCONFIG_ALLCONFIG:
CONFIG_C=y
# CONFIG_A is not set
CONFIG_D=y
First, CONFIG_C=y is read. C is set to 'y' and moved to the top.
C(=y) --> A(=?) --> B(=?) --> D(=?) --> E(=?)
Next, '# CONFIG_A is not set' is read. A is set to 'n' and moved to
the top.
A(=n) --> C(=y) --> B(=?) --> D(=?) --> E(=?)
Then, 'CONFIG_D=y' is read. D is set to 'y' and moved to the top.
D(=y) --> A(=n) --> C(=y) --> B(=?) --> E(=?)
Lastly, randconfig shuffles the order of the remaining symbols,
resulting in:
D(=y) --> A(=n) --> C(=y) --> B(=y) --> E(=y)
or
D(=y) --> A(=n) --> C(=y) --> E(=y) --> B(=y)
When calculating the output, the linked list is traversed and the first
visible symbol with 'y' is taken. In this case, it is D if visible.
If D is hidden by 'depends on', the next node, A, is examined. Since
it is already specified as 'n', it is skipped. Next, C is checked, and
selected if it is visible.
If C is also invisible, either B or E is chosen as a result of the
randomization.
If B and E are also invisible, the linked list is traversed in the
reverse order, and the least prioritized 'n' symbol is chosen. It is
A in this case.
Now, Kconfig remembers all user values. This is a big difference from
the previous implementation, where Kconfig would forget CONFIG_C=y when
CONFIG_D=y appeared in the same input file.
The new appaorch respects user-specified values as much as possible.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The kernel tree builds some "composite" DTBs, where the final DTB is the
result of applying one or more DTB overlays on top of a base DTB with
fdtoverlay.
The FIT image specification already supports configurations having one
base DTB and overlays applied on top. It is then up to the bootloader to
apply said overlays and either use or pass on the final result. This
allows the FIT image builder to reuse the same FDT images for multiple
configurations, if such cases exist.
The decomposition function depends on the kernel build system, reading
back the .cmd files for the to-be-packaged DTB files to check for the
fdtoverlay command being called. This will not work outside the kernel
tree. The function is off by default to keep compatibility with possible
existing users.
To facilitate the decomposition and keep the code clean, the model and
compatitble string extraction have been moved out of the output_dtb
function. The FDT image description is replaced with the base file name
of the included image.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Fix the following rpmbuild warning:
$ make srcrpm-pkg
...
RPM build warnings:
line 34: It's not recommended to have unversioned Obsoletes: Obsoletes: kernel-headers
Signed-off-by: Rafael Aquini <aquini@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
There used to be several offenders, but now that for all of them patches
were sent and most of them were applied, enable the warning also for
builds without W=1.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
At first, I thought this script would be needed only in init/Makefile.
However, commit 5db8face97 ("kbuild: Restore .version auto-increment
behaviour for Debian packages") and commit 1789fc9125 ("kbuild:
rpm-pkg: invoke the kernel build from rpmbuild for binrpm-pkg")
revealed that it was actually needed for scripts/package/mk* as well.
After all, scripts/ is a better place for it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Currently, sym_set_tristate_value() is used to set 'y' to a choice
member, which is confusing because it not only sets 'y' to the given
symbol but also tweaks flags of other symbols as a side effect.
Add a dedicated function for setting the value of the given choice.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The condition (t2 == 0) never becomes true because the zero value
(i.e., E_NONE) is only used as a dummy type for prevtoken. It can
be passed to t1, but not to t2.
The caller of this function only checks expr_compare_type() > 0.
Therefore, the distinction between 0 and -1 is unnecessary.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Set -e to make these scripts fail on the first error.
Set -u because these scripts are invoked by Makefile, and do not work
properly without necessary variables defined.
Both options are described in POSIX. [1]
[1]: https://pubs.opengroup.org/onlinepubs/009604499/utilities/set.html
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
CONFIG_DEBUG_INFO_BTF=y requires one additional link step.
(.tmp_vmlinux.btf)
CONFIG_KALLSYMS=y requires two additional link steps.
(.tmp_vmlinux.kallsyms1 and .tmp_vmlinux.kallsyms2)
Enabling both requires three additional link steps.
When CONFIG_DEBUG_INFO_BTF=y and CONFIG_KALLSYMS=y, the current build
process is as follows:
KSYMS .tmp_vmlinux.kallsyms0.S
AS .tmp_vmlinux.kallsyms0.o
LD .tmp_vmlinux.btf # temporary vmlinux for BTF
BTF .btf.vmlinux.bin.o
LD .tmp_vmlinux.kallsyms1 # temporary vmlinux for kallsyms step 1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.o
LD .tmp_vmlinux.kallsyms2 # temporary vmlinux for kallsyms step 2
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.o
LD vmlinux # final vmlinux
This is redundant because the BTF generation and the kallsyms step 1 can
be performed against the same temporary vmlinux.
When both CONFIG_DEBUG_INFO_BTF and CONFIG_KALLSYMS are enabled, we can
reduce the number of link steps by one.
This commit changes the build process as follows:
KSYMS .tmp_vmlinux0.kallsyms.S
AS .tmp_vmlinux0.kallsyms.o
LD .tmp_vmlinux1 # temporary vmlinux for BTF and kallsyms step 1
BTF .tmp_vmlinux1.btf.o
NM .tmp_vmlinux1.syms
KSYMS .tmp_vmlinux1.kallsyms.S
AS .tmp_vmlinux1.kallsyms.o
LD .tmp_vmlinux2 # temporary vmlinux for kallsyms step 2
NM .tmp_vmlinux2.syms
KSYMS .tmp_vmlinux2.kallsyms.S
AS .tmp_vmlinux2.kallsyms.o
LD vmlinux # final vmlinux
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
This reimplements commit 951bcae6c5 ("kallsyms: Avoid weak references
for kallsyms symbols") because I am not a big fan of PROVIDE().
As an alternative solution, this commit prepends one more kallsyms step.
KSYMS .tmp_vmlinux.kallsyms0.S # added
AS .tmp_vmlinux.kallsyms0.o # added
LD .tmp_vmlinux.btf
BTF .btf.vmlinux.bin.o
LD .tmp_vmlinux.kallsyms1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.o
LD .tmp_vmlinux.kallsyms2
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.o
LD vmlinux
Step 0 takes /dev/null as input, and generates .tmp_vmlinux.kallsyms0.o,
which has a valid kallsyms format with the empty symbol list, and can be
linked to vmlinux. Since it is really small, the added compile-time cost
is negligible.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
