This commit introduces a new 'I' mode for dm-integrity.
The 'I' mode may be selected if the underlying device has non-power-of-2
sector size. In this mode, dm-integrity will store integrity data
directly in device's sectors and it will not use journal.
This mode improves performance and reduces flash wear because there would
be no journal writes.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
The new HAVE_PWRCTL option is defined in the PCI subsystem, so
selecting it unconditionally when PCI is disabled causes a harmless
warning:
WARNING: unmet direct dependencies detected for HAVE_PWRCTL
Depends on [n]: PCI [=n]
Selected by [y]:
- ARCH_QCOM [=y]
Add 'if PCI' in the qualcomm platform to hide the warning.
Fixes: ed70aaac7c ("Kconfig: reduce the amount of power sequencing noise")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add sys_uretprobe entry to scripts/syscall.tbl as same as
arch/x86/entry/syscalls/syscall_64.tbl.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20240719102824.1e086a40@canb.auug.org.au/
Fixes: 63ded11097 ("uprobe: Change uretprobe syscall scope and number")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
dmam_free_coherent() frees a DMA allocation, which makes the
freed vaddr available for reuse, then calls devres_destroy()
to remove and free the data structure used to track the DMA
allocation. Between the two calls, it is possible for a
concurrent task to make an allocation with the same vaddr
and add it to the devres list.
If this happens, there will be two entries in the devres list
with the same vaddr and devres_destroy() can free the wrong
entry, triggering the WARN_ON() in dmam_match.
Fix by destroying the devres entry before freeing the DMA
allocation.
Tested:
kokonut //net/encryption
http://sponge2/b9145fe6-0f72-4325-ac2f-a84d81075b03
Fixes: 9ac7849e35 ("devres: device resource management")
Signed-off-by: Lance Richardson <rlance@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When we're called via
trans commit -> btree split -> allocator
We may have already arbitrarily many btree_paths, for the transaction
commit we're trying to do; when this happens, the
btree_trans_too_many_iters() call causes us to livelock.
Since the allocator calls btree_iter_dontneed to release paths as it
iterates, this shouldn't cause any problems.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Additional fixes on top of the original 6.11 pull request:
- undefined behaviour fixes, originally noted as breaking userspace LTO
builds
- fix a spurious warning in fsck_err, reported by Marcin
- fix an integer overflow on trans->nr_updates, also reported by Marcin;
this broke during deletion of highly fragmented indirect extents
- Add comments for lockdep functions
======
- Metadata version 1.8: Stripe sectors accounting, BCH_DATA_unstriped
This splits out the accounting of dirty sectors and stripe sectors in
alloc keys; this lets us see stripe buckets that still have unstriped
data in them.
This is needed for ensuring that erasure coding is working correctly, as
well as completing stripe creation after a crash.
- Metadata version 1.9: Disk accounting rewrite
The previous disk accounting scheme relied heavily on percpu counters
that were also sharded by outstanding journal buffer; it was fast but
not extensible or scalable, and meant that all accounting counters were
recorded in every journal entry.
The new disk accounting scheme stores accounting as normal btree keys;
updates are deltas until they are flushed by the btree write buffer.
This means we have no practical limit on the number of counters, and a
new tagged union format that's easy to extend.
We now have counters for compression type/ratio, per-snapshot-id usage,
per-btree-id usage, and pending rebalance work.
- Self healing on read IO/checksum error
data is now automatically rewritten if we get a read error and then a
successful retry
- Mount API conversion (thanks to Thomas Bertschinger)
- Better lockdep coverage
Previously, btree node locks were tracked individually by lockdep, like
any other lock. But we may take _many_ btree node locks simultaneously,
we easily blow through the limit of 48 locks that lockdep can track,
leading to lockdep turning itself off.
Tracking each btree node lock individually isn't really necessary since
we have our own cycle detector for deadlock avoidance and centralized
tracking of btree node locks, so we now have a single lockdep_map in
btree_trans for "any btree nodes are locked".
- some more small incremental work towards online check_allocations
- lots more debugging improvements, fixes
-----BEGIN PGP SIGNATURE-----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=tnhh
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-07-18.2' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs updates from Kent Overstreet:
- Metadata version 1.8: Stripe sectors accounting, BCH_DATA_unstriped
This splits out the accounting of dirty sectors and stripe sectors in
alloc keys; this lets us see stripe buckets that still have unstriped
data in them.
This is needed for ensuring that erasure coding is working correctly,
as well as completing stripe creation after a crash.
- Metadata version 1.9: Disk accounting rewrite
The previous disk accounting scheme relied heavily on percpu counters
that were also sharded by outstanding journal buffer; it was fast but
not extensible or scalable, and meant that all accounting counters
were recorded in every journal entry.
The new disk accounting scheme stores accounting as normal btree
keys; updates are deltas until they are flushed by the btree write
buffer.
This means we have no practical limit on the number of counters, and
a new tagged union format that's easy to extend.
We now have counters for compression type/ratio, per-snapshot-id
usage, per-btree-id usage, and pending rebalance work.
- Self healing on read IO/checksum error
Data is now automatically rewritten if we get a read error and then a
successful retry
- Mount API conversion (thanks to Thomas Bertschinger)
- Better lockdep coverage
Previously, btree node locks were tracked individually by lockdep,
like any other lock. But we may take _many_ btree node locks
simultaneously, we easily blow through the limit of 48 locks that
lockdep can track, leading to lockdep turning itself off.
Tracking each btree node lock individually isn't really necessary
since we have our own cycle detector for deadlock avoidance and
centralized tracking of btree node locks, so we now have a single
lockdep_map in btree_trans for "any btree nodes are locked".
- Some more small incremental work towards online check_allocations
- Lots more debugging improvements
- Fixes, including:
- undefined behaviour fixes, originally noted as breaking userspace
LTO builds
- fix a spurious warning in fsck_err, reported by Marcin
- fix an integer overflow on trans->nr_updates, also reported by
Marcin; this broke during deletion of highly fragmented indirect
extents
* tag 'bcachefs-2024-07-18.2' of https://evilpiepirate.org/git/bcachefs: (120 commits)
lockdep: Add comments for lockdep_set_no{validate,track}_class()
bcachefs: Fix integer overflow on trans->nr_updates
bcachefs: silence silly kdoc warning
bcachefs: Fix fsck warning about btree_trans not passed to fsck error
bcachefs: Add an error message for insufficient rw journal devs
bcachefs: varint: Avoid left-shift of a negative value
bcachefs: darray: Don't pass NULL to memcpy()
bcachefs: Kill bch2_assert_btree_nodes_not_locked()
bcachefs: Rename BCH_WRITE_DONE -> BCH_WRITE_SUBMITTED
bcachefs: __bch2_read(): call trans_begin() on every loop iter
bcachefs: show none if label is not set
bcachefs: drop packed, aligned from bkey_inode_buf
bcachefs: btree node scan: fall back to comparing by journal seq
bcachefs: Add lockdep support for btree node locks
lockdep: lockdep_set_notrack_class()
bcachefs: Improve copygc_wait_to_text()
bcachefs: Convert clock code to u64s
bcachefs: Improve startup message
bcachefs: Self healing on read IO error
bcachefs: Make read_only a mount option again, but hidden
...
New Features:
* Add support for large folios
* Implement rpcrdma generic device removal notification
* Add client support for attribute delegations
* Use a LAYOUTRETURN during reboot recovery to report layoutstats and errors
* Improve throughput for random buffered writes
* Add NVMe support to pnfs/blocklayout
Bugfixes:
* Fix rpcrdma_reqs_reset()
* Avoid soft lockups when using UDP
* Fix an nfs/blocklayout premature PR key unregestration
* Another fix for EXCHGID4_FLAG_USE_PNFS_DS for DS server
* Do not extend writes to the entire folio
* Pass explicit offset and count values to tracepoints
* Fix a race to wake up sleeping SUNRPC sync tasks
* Fix gss_status tracepoint output
Cleanups:
* Add missing MODULE_DESCRIPTION() macros
* Add blocklayout / SCSI layout tracepoints
* Remove asm-generic headers from xprtrdma verbs.c
* Remove unused 'struct mnt_fhstatus'
* Other delegation related cleanups
* Other folio related cleanups
* Other pNFS related cleanups
* Other xprtrdma cleanups
-----BEGIN PGP SIGNATURE-----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=avTW
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.11-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"New Features:
- Add support for large folios
- Implement rpcrdma generic device removal notification
- Add client support for attribute delegations
- Use a LAYOUTRETURN during reboot recovery to report layoutstats
and errors
- Improve throughput for random buffered writes
- Add NVMe support to pnfs/blocklayout
Bugfixes:
- Fix rpcrdma_reqs_reset()
- Avoid soft lockups when using UDP
- Fix an nfs/blocklayout premature PR key unregestration
- Another fix for EXCHGID4_FLAG_USE_PNFS_DS for DS server
- Do not extend writes to the entire folio
- Pass explicit offset and count values to tracepoints
- Fix a race to wake up sleeping SUNRPC sync tasks
- Fix gss_status tracepoint output
Cleanups:
- Add missing MODULE_DESCRIPTION() macros
- Add blocklayout / SCSI layout tracepoints
- Remove asm-generic headers from xprtrdma verbs.c
- Remove unused 'struct mnt_fhstatus'
- Other delegation related cleanups
- Other folio related cleanups
- Other pNFS related cleanups
- Other xprtrdma cleanups"
* tag 'nfs-for-6.11-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (63 commits)
SUNRPC: Fixup gss_status tracepoint error output
SUNRPC: Fix a race to wake a sync task
nfs: split nfs_read_folio
nfs: pass explicit offset/count to trace events
nfs: do not extend writes to the entire folio
nfs/blocklayout: add support for NVMe
nfs: remove nfs_page_length
nfs: remove the unused max_deviceinfo_size field from struct pnfs_layoutdriver_type
nfs: don't reuse partially completed requests in nfs_lock_and_join_requests
nfs: move nfs_wait_on_request to write.c
nfs: fold nfs_page_group_lock_subrequests into nfs_lock_and_join_requests
nfs: fold nfs_folio_find_and_lock_request into nfs_lock_and_join_requests
nfs: simplify nfs_folio_find_and_lock_request
nfs: remove nfs_folio_private_request
nfs: remove dead code for the old swap over NFS implementation
NFSv4.1 another fix for EXCHGID4_FLAG_USE_PNFS_DS for DS server
nfs: Block on write congestion
nfs: Properly initialize server->writeback
nfs: Drop pointless check from nfs_commit_release_pages()
nfs/blocklayout: SCSI layout trace points for reservation key reg/unreg
...
feature. Also some performance improvements; in particular, improving
IOPS and throughput on fast devices running Async Direct I/O by up to
20% by optimizing jbd2_transaction_committed().
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmaYiqsACgkQ8vlZVpUN
gaOWpQf/d6Y9WGyjeC1jOc+vIBxLgL+X0kbzYkkjGTSIZ7mZJS9X4NMMEtqayJ4f
1zGobcGENc05l4LVxf3uMbDj1aGlHeI9X4GLGaP5s5NcaAl4HKjQ3aFs3MuiJHPj
Ol2CebXJx+NKt1lkD8PSPGgaTb5zg+SeZifI+OZ1RpkcKmGnkSNa5NkUNAaBh6dl
5LLXTc2p9NcCwAwDAQSiAJCV35bAZpcp6fwLLaPQ6Eok9HxGcJuYXW2Fict4rbtV
mXeogXVIo2bkMcfh6tDchDBrFvORYIA7uBVmaG1LgAMrtEnYxnxnEntD0h6j/bzF
Fl4jjQfd8o2uYto/4eo+iY6Z0haxyQ==
=rcOo
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Many cleanups and bug fixes in ext4, especially for the fast commit
feature.
Also some performance improvements; in particular, improving IOPS and
throughput on fast devices running Async Direct I/O by up to 20% by
optimizing jbd2_transaction_committed()"
* tag 'ext4_for_linus-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits)
ext4: make sure the first directory block is not a hole
ext4: check dot and dotdot of dx_root before making dir indexed
ext4: sanity check for NULL pointer after ext4_force_shutdown
jbd2: increase maximum transaction size
jbd2: drop pointless shrinker batch initialization
jbd2: avoid infinite transaction commit loop
jbd2: precompute number of transaction descriptor blocks
jbd2: make jbd2_journal_get_max_txn_bufs() internal
jbd2: avoid mount failed when commit block is partial submitted
ext4: avoid writing unitialized memory to disk in EA inodes
ext4: don't track ranges in fast_commit if inode has inlined data
ext4: fix possible tid_t sequence overflows
ext4: use ext4_update_inode_fsync_trans() helper in inode creation
ext4: add missing MODULE_DESCRIPTION()
jbd2: add missing MODULE_DESCRIPTION()
ext4: use memtostr_pad() for s_volume_name
jbd2: speed up jbd2_transaction_committed()
ext4: make ext4_da_map_blocks() buffer_head unaware
ext4: make ext4_insert_delayed_block() insert multi-blocks
ext4: factor out a helper to check the cluster allocation state
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZpjJRwAKCRCRxhvAZXjc
os63AQCCoMzENXY4d5N80H+L6ro1Ccj/nwMACwuvwcDN9pCj7gD/X1T/pidHdagh
kmzfltsva4TA77Zg6kfuzvd1tA3PnwE=
=rXm4
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.11-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix a missing rcu_read_unlock() in nsfs by switching to a cleanup
guard
- Add missing module descriptor for adfs
* tag 'vfs-6.11-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nsfs: use cleanup guard
fs/adfs: add MODULE_DESCRIPTION
around, mostly more of the usual:
- More Spanish, Italian, and Chinese translations
- A new script, scripts/checktransupdate.py, can be used to see which
commits have touched an (English) document since a given translation was
last updated.
- A couple of "best practices" suggestions (on Link: tags and off-list
discussions) that were not entirely at consensus level, but I concluded
they were close enough to accept.
- Some nice cleanups removing documentation for kernel parameters that have
not been recognized for ... a long time.
...along with the usual updates, typo fixes, and such.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmaZbLMPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Y7PkH/jk1LverE9XOXZO5Uq+eEwWlNI2khjQ0hI+M
b0GZlIfeHsted0I8CsYapbehhqve700QJQ8/dmst9jPEwiQq9omSNp8ux/mpIvk+
OjeCLoApZ1slYj9HeiDkwuLDw5o0bKOep6fmrlnnc2uJezqBbjSLmUgocqfCnZb1
fHikvSP0McKjffei76+KH1PYK8BmJwredsHvmfehLJpETHQhe11tO3byPM48iLcy
mybECacqB8zfy7wkvVTWhd+QFkT7x+BE4g/Z07L8z4m9HRxmJbV6EJF1GPlpDJWZ
TV0u86cOAlpMeUy44pfUnej6E9ntafeaHmX7CJpcgskh3h4J/qc=
=uk19
-----END PGP SIGNATURE-----
Merge tag 'docs-6.11' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"Nothing hugely exciting happening in the documentation tree this time
around, mostly more of the usual:
- More Spanish, Italian, and Chinese translations
- A new script, scripts/checktransupdate.py, can be used to see which
commits have touched an (English) document since a given
translation was last updated.
- A couple of "best practices" suggestions (on Link: tags and
off-list discussions) that were not entirely at consensus level,
but I concluded they were close enough to accept.
- Some nice cleanups removing documentation for kernel parameters
that have not been recognized for ... a long time.
...along with the usual updates, typo fixes, and such"
* tag 'docs-6.11' of git://git.lwn.net/linux: (57 commits)
Documentation: Document user_events ioctl code
docs/pinctrl: fix typo in mapping example
docs: maintainer: discourage taking conversations off-list
docs: driver-model: platform: update the definition of platform_driver
docs/sp_SP: Add translation for scheduler/sched-design-CFS.rst
writing_musb_glue_layer.rst: Fix broken URL
zh_CN/admin-guide: one typo fix
docs/zh_CN/virt: Update the translation of guest-halt-polling.rst
Documentation: add reference from dynamic debug to loglevel kernel params
Documentation: best practices for using Link trailers
Documentation: fix links to mailing list services
Documentation: exception-tables.rst: Fix the wrong steps referenced
docs/zh_CN: add process/researcher-guidelines Chinese translation
Documentation/tools/rv: fix document header
docs/sp_SP: Add translation of process/maintainer-kvm-x86.rst
docs/admin-guide/mm: correct typo 'quired' to 'queried'
Add libps2 to the input section of driver-api
Docs/mm/index: move allocation profiling document to unsorted documents chapter
Docs/mm/index: rename 'Legacy Documentation' to 'Unsorted Documentation'
Docs/mm/index: Remove 'Memory Management Guide' chapter marker
...
- Add MODULE_DESCRIPTION for a number of sbus drivers
- Fix linking error for large sparc32 kernels
- Fix incorrect functions signature and prototype warnings for sparc64
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQfqfbgobF48oKMeq81AykqDLayywUCZpjDYRQcYW5kcmVhc0Bn
YWlzbGVyLmNvbQAKCRA1AykqDLayy7+vAP45h4TU0KyThlVXpmknK3xnIzaQr86y
leL6kJXwuSDQvAD8DpyasoLS43ryB1NV2RpNUWVHlwmdQ3f9CNleHinkJgA=
=tdDX
-----END PGP SIGNATURE-----
Merge tag 'sparc-for-6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc
Pull sparc updates from Andreas Larsson:
- Add MODULE_DESCRIPTION for a number of sbus drivers
- Fix linking error for large sparc32 kernels
- Fix incorrect functions signature and prototype warnings for sparc64
* tag 'sparc-for-6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc:
sparc64: Fix prototype warnings in hibernate.c
sparc64: Fix prototype warning for prom_get_mmu_ihandle
sparc64: Fix incorrect function signature and add prototype for prom_cif_init
sparc64: Fix prototype warnings for floppy_64.h
sparc32: Fix truncated relocation errors when linking large kernels
sbus: add missing MODULE_DESCRIPTION() macros
- Remove restrictions on PAI NNPA and crypto counters, enabling
concurrent per-task and system-wide sampling and counting events
- Switch to GENERIC_CPU_DEVICES by setting up the CPU present mask in
the architecture code and letting the generic code handle CPU bring-up
- Add support for the diag204 busy indication facility to prevent
undesirable blocking during hypervisor logical CPU utilization
queries. Implement results caching
- Improve the handling of Store Data SCLP events by suppressing
unnecessary warning, preventing buffer release in I/O during failures,
and adding timeout handling for Store Data requests to address potential
firmware issues
- Provide optimized __arch_hweight*() implementations
- Remove the unnecessary CPU KOBJ_CHANGE uevents generated during topology
updates, as they are unused and also not present on other architectures
- Cleanup atomic_ops, optimize __atomic_set() for small values and
__atomic_cmpxchg_bool() for compilers supporting flag output constraint
- Couple of cleanups for KVM:
- Move and improve KVM struct definitions for DAT tables from gaccess.c
to a new header
- Pass the asce as parameter to sie64a()
- Make the crdte() and cspg() page table handling wrappers return a
boolean to indicate success, like the other existing "compare and swap"
wrappers
- Add documentation for HWCAP flags
- Switch to obtaining total RAM pages from memblock instead of
totalram_pages() during mm init, to ensure correct calculation of zero
page size, when defer_init is enabled
- Refactor lowcore access and switch to using the get_lowcore() function
instead of the S390_lowcore macro
- Cleanups for PG_arch_1 and folio handling in UV and hugetlb code
- Add missing MODULE_DESCRIPTION() macros
- Fix VM_FAULT_HWPOISON handling in do_exception()
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmaYGegACgkQjYWKoQLX
FBjCwwf/aRYoLIXCa9/nHGWFiUjZm6xBgVwZh55bXjfNG9TI2J9UZSsYlOFGUJKl
gvD2Ym+LqAejK8R4EUHkfD6ftaKMQuIxNDoedxhwuSpfOQ2mZ5teu0MxTh8QcUAx
4Y2w5XEeCuqE3SuoZ4SJa58K4rGl4cFpPsKNa8ofdzH1ZLFNe8Wqzis4kh0htqLb
FtPj6nsgfzQ5kg14rVkGxCa4CqoFxonXgsA6nH6xZLbxKUInyq8uV44UBQ+aJq5v
dsdzZ5XuAJHN2FpBuuOYQYZYw3XIy/kka7o4EjffORi5SGCRMWO4Zt0P6HXaNkh6
xV8EEO8myeo7rV8dnrk1V4yGjGJmfA==
=3IGY
-----END PGP SIGNATURE-----
Merge tag 's390-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Remove restrictions on PAI NNPA and crypto counters, enabling
concurrent per-task and system-wide sampling and counting events
- Switch to GENERIC_CPU_DEVICES by setting up the CPU present mask in
the architecture code and letting the generic code handle CPU
bring-up
- Add support for the diag204 busy indication facility to prevent
undesirable blocking during hypervisor logical CPU utilization
queries. Implement results caching
- Improve the handling of Store Data SCLP events by suppressing
unnecessary warning, preventing buffer release in I/O during
failures, and adding timeout handling for Store Data requests to
address potential firmware issues
- Provide optimized __arch_hweight*() implementations
- Remove the unnecessary CPU KOBJ_CHANGE uevents generated during
topology updates, as they are unused and also not present on other
architectures
- Cleanup atomic_ops, optimize __atomic_set() for small values and
__atomic_cmpxchg_bool() for compilers supporting flag output
constraint
- Couple of cleanups for KVM:
- Move and improve KVM struct definitions for DAT tables from
gaccess.c to a new header
- Pass the asce as parameter to sie64a()
- Make the crdte() and cspg() page table handling wrappers return a
boolean to indicate success, like the other existing "compare and
swap" wrappers
- Add documentation for HWCAP flags
- Switch to obtaining total RAM pages from memblock instead of
totalram_pages() during mm init, to ensure correct calculation of
zero page size, when defer_init is enabled
- Refactor lowcore access and switch to using the get_lowcore()
function instead of the S390_lowcore macro
- Cleanups for PG_arch_1 and folio handling in UV and hugetlb code
- Add missing MODULE_DESCRIPTION() macros
- Fix VM_FAULT_HWPOISON handling in do_exception()
* tag 's390-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits)
s390/mm: Fix VM_FAULT_HWPOISON handling in do_exception()
s390/kvm: Move bitfields for dat tables
s390/entry: Pass the asce as parameter to sie64a()
s390/sthyi: Use cached data when diag is busy
s390/sthyi: Move diag operations
s390/hypfs_diag: Diag204 busy loop
s390/diag: Add busy-indication-facility requirements
s390/diag: Diag204 add busy return errno
s390/diag: Return errno's from diag204
s390/sclp: Diag204 busy indication facility detection
s390/atomic_ops: Make use of flag output constraint
s390/atomic_ops: Improve __atomic_set() for small values
s390/atomic_ops: Use symbolic names
s390/smp: Switch to GENERIC_CPU_DEVICES
s390/hwcaps: Add documentation for HWCAP flags
s390/pgtable: Make crdte() and cspg() return a value
s390/topology: Remove CPU KOBJ_CHANGE uevents
s390/sclp: Add timeout to Store Data requests
s390/sclp: Prevent release of buffer in I/O
s390/sclp: Suppress unnecessary Store Data warning
...
Shifting a value by the width of its type or more is undefined.
Signed-off-by: Tavian Barnes <tavianator@tavianator.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If a btree_trans is in use it's supposed to be passed to fsck_err so
that it can be unlocked if we're waiting on userspace input; but the
btree IO paths do call fsck errors where a btree_trans exists on the
stack but it's not passed through.
But it's ok, because it's unlocked while doing IO.
Fixes: a850bde649 ("bcachefs: fsck_err() may now take a btree_trans")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Shifting a negative value left is undefined.
Signed-off-by: Tavian Barnes <tavianator@tavianator.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- Enable the named address spaces based percpu accessors optimization
on all GCC versions that contain this feature, detected through
a build-time testcase. This effectively enables the feature on
GCC 6, GCC 7 and GCC 8 versions.
- Fix operand constraint modifier in __raw_cpu_write()
- Reorganize the per-CPU headers for better readability
- Misc cleanups and fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Icfc
-----END PGP SIGNATURE-----
Merge tag 'x86-percpu-2024-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 percpu updates from Ingo Molnar:
- Enable the named address spaces based percpu accessors optimization
on all GCC versions that contain this feature, detected through a
build-time testcase.
This effectively enables the feature on GCC 6, GCC 7 and GCC 8
versions.
- Fix operand constraint modifier in __raw_cpu_write()
- Reorganize the per-CPU headers for better readability
- Misc cleanups and fixes
* tag 'x86-percpu-2024-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/percpu: Enable named address spaces for all capable GCC versions
x86/percpu: Clean up <asm/percpu.h> vertical alignment details
x86/percpu: Clean up <asm/percpu.h> a bit
x86/percpu: Move some percpu accessors around to reduce ifdeffery
x86/percpu: Rename percpu_stable_op() to __raw_cpu_read_stable()
x86/percpu: Fix operand constraint modifier in __raw_cpu_write()
x86/percpu: Introduce the __raw_cpu_read_const() macro
x86/percpu: Unify percpu read-write accessors
x86/percpu: Move some percpu macros around for readability
x86/percpu: Introduce the pcpu_binary_op() macro
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmaXl0kACgkQu+CwddJF
iJrOlgf+N/G7BmgoW2CBF7mKsvCYs+pX3xeBuxPtsuq4FD386nsPFMN8gWAYLG3q
ZU1z1S+0M8LhTg6/G9jMYLHt2Y7WhYbhFTjTHmULJkuhMDTUP9CRYy4XZ+hdPtHF
30ezSdJQF9x/XxCSaaRVK1s+SMVHFg5xAOHKpfkNSamcMz9g+ZkYyPBr10/VoKd0
JqwhW7r6hrlvWAiqY3QKCOvohIWglgvBUnNjUGMh1cUkOE2aYLYHklhRwICKgA6z
p/2BUXiAEWUtgBkUrizwm/pdhJXLs0pOeYarVZP1v83tQMxyrc6XLNnqhvxP3DPW
31thF5Rf9I8WaWTczXhxsAwFjqO3KQ==
=4uf9
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
"The most prominent change this time is the kmem_buckets based
hardening of kmalloc() allocations from Kees Cook.
We have also extended the kmalloc() alignment guarantees for
non-power-of-two sizes in a way that benefits rust.
The rest are various cleanups and non-critical fixups.
- Dedicated bucket allocator (Kees Cook)
This series [1] enhances the probabilistic defense against heap
spraying/grooming of CONFIG_RANDOM_KMALLOC_CACHES from last year.
kmalloc() users that are known to be useful for exploits can get
completely separate set of kmalloc caches that can't be shared with
other users. The first converted users are alloc_msg() and
memdup_user().
The hardening is enabled by CONFIG_SLAB_BUCKETS.
- Extended kmalloc() alignment guarantees (Vlastimil Babka)
For years now we have guaranteed natural alignment for power-of-two
allocations, but nothing was defined for other sizes (in practice,
we have two such buckets, kmalloc-96 and kmalloc-192).
To avoid unnecessary padding in the rust layer due to its alignment
rules, extend the guarantee so that the alignment is at least the
largest power-of-two divisor of the requested size.
This fits what rust needs, is a superset of the existing
power-of-two guarantee, and does not in practice change the layout
(and thus does not add overhead due to padding) of the kmalloc-96
and kmalloc-192 caches, unless slab debugging is enabled for them.
- Cleanups and non-critical fixups (Chengming Zhou, Suren
Baghdasaryan, Matthew Willcox, Alex Shi, and Vlastimil Babka)
Various tweaks related to the new alloc profiling code, folio
conversion, debugging and more leftovers after SLAB"
Link: https://lore.kernel.org/all/20240701190152.it.631-kees@kernel.org/ [1]
* tag 'slab-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/memcg: alignment memcg_data define condition
mm, slab: move prepare_slab_obj_exts_hook under CONFIG_MEM_ALLOC_PROFILING
mm, slab: move allocation tagging code in the alloc path into a hook
mm/util: Use dedicated slab buckets for memdup_user()
ipc, msg: Use dedicated slab buckets for alloc_msg()
mm/slab: Introduce kmem_buckets_create() and family
mm/slab: Introduce kvmalloc_buckets_node() that can take kmem_buckets argument
mm/slab: Plumb kmem_buckets into __do_kmalloc_node()
mm/slab: Introduce kmem_buckets typedef
slab, rust: extend kmalloc() alignment guarantees to remove Rust padding
slab: delete useless RED_INACTIVE and RED_ACTIVE
slab: don't put freepointer outside of object if only orig_size
slab: make check_object() more consistent
mm: Reduce the number of slab->folio casts
mm, slab: don't wrap internal functions with alloc_hooks()
* reserve_mem command line parameter to allow creation of named memory
reservation at boot time.
The driving use-case is to improve the ability of pstore to retain
ramoops data across reboots.
* cleaunps and small improvements in memblock and mm_init
* new tests cases in memblock test suite
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmaXfoIQHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kU5mCAC23vIrB8FRlORczMYj+V3VFss3OjKT92lS
fHGwq2oxHW+rdDpHXFObHU0D3k8d2l5jyrENRAAyA02qR0L6Pv8Na6pGxQua1eic
VIdw0PFQMsizD1AIj84Y6skkyyF/tvZHpmX0B12D5+Ur65DC/Z867Cm/lE33/fHv
/1+QB0JlG7W+FzxVstYyebY5/DVkH+bC7/A57FE2oB4BRXjEd8v9tTHBS4kRSvrE
zE2KFxeGajN749LHztIpIprPKehu8Gc3oLrYLNJO+uLFVCV8ey3OqVj0RXMG2wLl
hmVYqhbZM/Uz59D/P8pULD49f1Thjv/5A/MvUZ3SxM6zpWlsincf
=xrZd
-----END PGP SIGNATURE-----
Merge tag 'memblock-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
- 'reserve_mem' command line parameter to allow creation of named
memory reservation at boot time.
The driving use-case is to improve the ability of pstore to retain
ramoops data across reboots.
- cleanups and small improvements in memblock and mm_init
- new tests cases in memblock test suite
* tag 'memblock-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: fix implicit declaration of function 'numa_valid_node'
memblock: Move late alloc warning down to phys alloc
pstore/ramoops: Add ramoops.mem_name= command line option
mm/memblock: Add "reserve_mem" to reserved named memory at boot up
mm/mm_init.c: don't initialize page->lru again
mm/mm_init.c: not always search next deferred_init_pfn from very beginning
mm/mm_init.c: use deferred_init_mem_pfn_range_in_zone() to decide loop condition
mm/mm_init.c: get the highest zone directly
mm/mm_init.c: move nr_initialised reset down a bit
mm/memblock: fix a typo in description of for_each_mem_region()
mm/mm_init.c: use memblock_region_memory_base_pfn() to get startpfn
mm/memblock: use PAGE_ALIGN_DOWN to get pgend in free_memmap
mm/memblock: return true directly on finding overlap region
memblock tests: add memblock_overlaps_region_checks
mm/memblock: fix comment for memblock_isolate_range()
memblock tests: add memblock_reserve_many_may_conflict_check()
memblock tests: add memblock_reserve_all_locations_check()
mm/memblock: remove empty dummy entry
Build
-----
* Build each directory as a library so that depedency check for the
python extension module can be automatic. But it also introduces
some trivial merge conflicts with other trees that touched perf tools
codes. Basically it changes perf-y to perf-util-y or similar and you
can find the resolution in the perf-next tree here.
- https://lore.kernel.org/r/Zn8HeRRX3JV2IcxQ@sirena.org.uk
- https://lore.kernel.org/r/20240709100536.238f4d12@canb.auug.org.au
* Use pkg-config to check libtraceevent and libtracefs.
perf sched
----------
* Add --task-name and --fuzzy-name options for `perf sched map`. It's
to focus on selected tasks only by removing unrelated tasks in the
output. It matches the task comm with the given string and the
--fuzzy-name option allows the partial matching.
$ sudo perf sched record -a sleep 1
$ sudo perf sched map --task-name kworker --fuzzy-name
. . . . - *A0 . . 481065.315131 secs A0 => kworker/5:2-i91:438521
. . . . - *- . . 481065.315160 secs
*B0 . . . - . . . 481065.316435 secs B0 => kworker/0:0-i91:437860
*- . . . . . . . 481065.316441 secs
. . . . . *A0 . . 481065.318703 secs
. . . . . *- . . 481065.318717 secs
. . *C0 . . . . . 481065.320544 secs C0 => kworker/u16:30-:430186
. . *- . . . . . 481065.320555 secs
. . *D0 . . . . . 481065.328524 secs D0 => kworker/2:0-kdm:429654
*B0 . D0 . - . . . 481065.328527 secs
*- . D0 . - . . . 481065.328535 secs
. . *- . . . . . 481065.328535 secs
* Fix -r/--repeat option of perf sched replay. The documentation said
-1 will work as infinity but it didn't accept the value. Update the
code and document to use 0 instead.
* Fix perf sched timehist to account the delay time for preempted tasks.
Perf event filtering
--------------------
* perf top gained filtering support on regular events using BPF like
perf record. Previously it was able to use it for tracepoints only.
* The BPF filter now supports filtering by UID/GID. This should be
preferred than -u <UID> option as it's racy to scan /proc to check
tasks for the user and fails to open an event for the task if it's
already gone.
$ sudo perf top -e cycles --filter "uid == $(id -u)"
perf report
-----------
* Skip dummy events in the group output by default. The --skip-empty
option controls display of empty events without samples. But perf
report can force display all events in a group. In this case, auto-
added a dummy event (for a system-wide record) ends up in the output.
Now it can skip those empty events even in the group display mode.
To preserve the old behavior, run this:
$ perf report --group --no-skip-empty
perf stat
---------
* Choose the most disaggregate option when multiple aggregation options
are given. It used to pick the last option in the command line but
it can be confusing and not consistent. Now it'll choose the smallest
unit.
For example, it'd aggregate the result per-core when the user gave
both --per-socket and --per-core options at the same time.
Internals
---------
* Fix `perf bench` when some CPUs are offline.
* Fix handling of JIT symbol mappings to accept "/tmp/perf-${PID}.map
patterns only so that it can not be confused by other /tmp/perf-*
files.
* Many improvements and fixes for `perf test`.
Others
------
* Support some new instructions for Intel-PT.
* Fix syscall ID mapping in perf trace.
* Document AMD IBS PMU usages.
* Change `perf lock info` to show map and thread info by default.
Vendor JSON events
------------------
* Update Intel events and metrics
* Add i.MX9[35] DDR metrics
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCZpbe+QAKCRCMstVUGiXM
g4X6AQCXJ+eCuBy/9IvDpo86KjemPQk/brA0X8Ufi7JCd+Vj4QD7BvDobClewn+v
W3MhNQwIlFPJ8u3Act+tJZfUJjVF4wU=
=ZkPv
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.11-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"Build:
- Build each directory as a library so that depedency check for the
python extension module can be automatic
- Use pkg-config to check libtraceevent and libtracefs
perf sched:
- Add --task-name and --fuzzy-name options for `perf sched map`
It focuses on selected tasks only by removing unrelated tasks in
the output. It matches the task comm with the given string and the
--fuzzy-name option allows the partial matching:
$ sudo perf sched record -a sleep 1
$ sudo perf sched map --task-name kworker --fuzzy-name
. . . . - *A0 . . 481065.315131 secs A0 => kworker/5:2-i91:438521
. . . . - *- . . 481065.315160 secs
*B0 . . . - . . . 481065.316435 secs B0 => kworker/0:0-i91:437860
*- . . . . . . . 481065.316441 secs
. . . . . *A0 . . 481065.318703 secs
. . . . . *- . . 481065.318717 secs
. . *C0 . . . . . 481065.320544 secs C0 => kworker/u16:30-:430186
. . *- . . . . . 481065.320555 secs
. . *D0 . . . . . 481065.328524 secs D0 => kworker/2:0-kdm:429654
*B0 . D0 . - . . . 481065.328527 secs
*- . D0 . - . . . 481065.328535 secs
. . *- . . . . . 481065.328535 secs
- Fix -r/--repeat option of perf sched replay
The documentation said -1 will work as infinity but it didn't
accept the value. Update the code and document to use 0 instead
- Fix perf sched timehist to account the delay time for preempted
tasks
Perf event filtering:
- perf top gained filtering support on regular events using BPF like
perf record. Previously it was able to use it for tracepoints only
- The BPF filter now supports filtering by UID/GID. This should be
preferred than -u <UID> option as it's racy to scan /proc to check
tasks for the user and fails to open an event for the task if it's
already gone
$ sudo perf top -e cycles --filter "uid == $(id -u)"
perf report:
- Skip dummy events in the group output by default. The --skip-empty
option controls display of empty events without samples. But perf
report can force display all events in a group
In this case, auto-added a dummy event (for a system-wide record)
ends up in the output. Now it can skip those empty events even in
the group display mode
To preserve the old behavior, run this:
$ perf report --group --no-skip-empty
perf stat:
- Choose the most disaggregate option when multiple aggregation
options are given. It used to pick the last option in the command
line but it can be confusing and not consistent. Now it'll choose
the smallest unit
For example, it'd aggregate the result per-core when the user gave
both --per-socket and --per-core options at the same time
Internals:
- Fix `perf bench` when some CPUs are offline
- Fix handling of JIT symbol mappings to accept "/tmp/perf-${PID}.map
patterns only so that it can not be confused by other /tmp/perf-*
files
- Many improvements and fixes for `perf test`
Others:
- Support some new instructions for Intel-PT
- Fix syscall ID mapping in perf trace
- Document AMD IBS PMU usages
- Change `perf lock info` to show map and thread info by default
Vendor JSON events:
- Update Intel events and metrics
- Add i.MX9[35] DDR metrics"
* tag 'perf-tools-for-v6.11-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (125 commits)
perf trace: Fix iteration of syscall ids in syscalltbl->entries
perf dso: Fix address sanitizer build
perf mem: Warn if memory events are not supported on all CPUs
perf arm-spe: Support multiple Arm SPE PMUs
perf build x86: Fix SC2034 error in syscalltbl.sh
perf record: Fix memset out-of-range error
perf sched map: Add --fuzzy-name option for fuzzy matching in task names
perf sched map: Add support for multiple task names using CSV
perf sched map: Add task-name option to filter the output map
perf build: Conditionally add feature check flags for libtrace{event,fs}
perf install: Don't propagate subdir to Documentation submake
perf vendor events arm64:: Add i.MX95 DDR Performance Monitor metrics
perf vendor events arm64:: Add i.MX93 DDR Performance Monitor metrics
perf dsos: When adding a dso into sorted dsos maintain the sort order
perf comm str: Avoid sort during insert
perf report: Calling available function for stats printing
perf intel-pt: Fix exclude_guest setting
perf intel-pt: Fix aux_watermark calculation for 64-bit size
perf sched replay: Fix -r/--repeat command line option for infinity
perf: pmus: Remove unneeded semicolon
...
- Update Daniel Bristot de Oliveira's entry in MAINTAINERS with respect to
his tracing code.
- Add more credits to him in CREDITS file and move his entry to be
alphabetical.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZpf0sxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhJuAQDQjkZfiOmtJK8dloFZnHoLfvueoGet
VrTMVwkyKZpwJAD/SdigAGb38ld/wePmV4Jsmg+fIR8f//elozzYv4ylfQA=
=+lKf
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing CREDITS file update from Steven Rostedt:
"Update of MAINTAINERS and CREDITS file
- Update Daniel Bristot de Oliveira's entry in MAINTAINERS with
respect to his tracing code.
- Add more credits to him in CREDITS file and move his entry to be
alphabetical"
* tag 'trace-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Update MAINTAINERS file
This is a partial revert of commit
8117961d98 ("x86/efi: Disregard setup header of loaded image")
which triggers boot issues on older Dell laptops. As it turns out,
switching back to a heap allocation for the struct boot_params
constructed by the EFI stub works around this, even though it is unclear
why.
Cc: Christian Heusel <christian@heusel.eu>
Reported-by: <mavrix#kernel@simplelogin.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
- Use pretty formatting only on interactive tty in rtla/osnoise
- Better reporting when histogram is empty in rtla/osnoise
- Use the correct library name for "libtracefs" in feature detection
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZpbYbRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qpWSAQD69Ea2bOCRuqCW6mjH4iPgWA3Re4Xt
rnUI3mWT7+FSNwD/T1ElUQ8/mfJptawZl1KyACNovtE1xMn365yHsFA2Mgg=
=fnCa
-----END PGP SIGNATURE-----
Merge tag 'trace-tools-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tools updates from Steven Rostedt:
"Trivial updates for 6.11:
- Use pretty formatting only on interactive tty in rtla/osnoise
- Better reporting when histogram is empty in rtla/osnoise
- Use the correct library name for "libtracefs" in feature detection"
* tag 'trace-tools-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools: build: use correct lib name for libtracefs feature detection
rtla/osnoise: Better report when histogram is empty
rtla/osnoise: Use pretty formatting only on interactive tty
Up until now, the function graph tracer could only have a single user
attached to it. If another user tried to attach to the function graph
tracer while one was already attached, it would fail. Allowing function
graph tracer to have more than one user has been asked for since 2009, but
it required a rewrite to the logic to pull it off so it never happened.
Until now!
There's three systems that trace the return of a function. That is
kretprobes, function graph tracer, and BPF. kretprobes and function graph
tracing both do it similarly. The difference is that kretprobes uses a
shadow stack per callback and function graph tracer creates a shadow stack
for all tasks. The function graph tracer method makes it possible to trace
the return of all functions. As kretprobes now needs that feature too,
allowing it to use function graph tracer was needed. BPF also wants to
trace the return of many probes and its method doesn't scale either.
Having it use function graph tracer would improve that.
By allowing function graph tracer to have multiple users allows both
kretprobes and BPF to use function graph tracer in these cases. This will
allow kretprobes code to be removed in the future as it's version will no
longer be needed. Note, function graph tracer is only limited to 16
simultaneous users, due to shadow stack size and allocated slots.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZpbWlxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qgtvAP9jxmgEiEhz4Bpe1vRKVSMYK6ozXHTT
7MFKRMeQqQ8zeAEA2sD5Zrt9l7zKzg0DFpaDLgc3/yh14afIDxzTlIvkmQ8=
=umuf
-----END PGP SIGNATURE-----
Merge tag 'ftrace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace updates from Steven Rostedt:
"Rewrite of function graph tracer to allow multiple users
Up until now, the function graph tracer could only have a single user
attached to it. If another user tried to attach to the function graph
tracer while one was already attached, it would fail. Allowing
function graph tracer to have more than one user has been asked for
since 2009, but it required a rewrite to the logic to pull it off so
it never happened. Until now!
There's three systems that trace the return of a function. That is
kretprobes, function graph tracer, and BPF. kretprobes and function
graph tracing both do it similarly. The difference is that kretprobes
uses a shadow stack per callback and function graph tracer creates a
shadow stack for all tasks. The function graph tracer method makes it
possible to trace the return of all functions. As kretprobes now needs
that feature too, allowing it to use function graph tracer was needed.
BPF also wants to trace the return of many probes and its method
doesn't scale either. Having it use function graph tracer would
improve that.
By allowing function graph tracer to have multiple users allows both
kretprobes and BPF to use function graph tracer in these cases. This
will allow kretprobes code to be removed in the future as it's version
will no longer be needed.
Note, function graph tracer is only limited to 16 simultaneous users,
due to shadow stack size and allocated slots"
* tag 'ftrace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (49 commits)
fgraph: Use str_plural() in test_graph_storage_single()
function_graph: Add READ_ONCE() when accessing fgraph_array[]
ftrace: Add missing kerneldoc parameters to unregister_ftrace_direct()
function_graph: Everyone uses HAVE_FUNCTION_GRAPH_RET_ADDR_PTR, remove it
function_graph: Fix up ftrace_graph_ret_addr()
function_graph: Make fgraph_update_pid_func() a stub for !DYNAMIC_FTRACE
function_graph: Rename BYTE_NUMBER to CHAR_NUMBER in selftests
fgraph: Remove some unused functions
ftrace: Hide one more entry in stack trace when ftrace_pid is enabled
function_graph: Do not update pid func if CONFIG_DYNAMIC_FTRACE not enabled
function_graph: Make fgraph_do_direct static key static
ftrace: Fix prototypes for ftrace_startup/shutdown_subops()
ftrace: Assign RCU list variable with rcu_assign_ptr()
ftrace: Assign ftrace_list_end to ftrace_ops_list type cast to RCU
ftrace: Declare function_trace_op in header to quiet sparse warning
ftrace: Add comments to ftrace_hash_move() and friends
ftrace: Convert "inc" parameter to bool in ftrace_hash_rec_update_modify()
ftrace: Add comments to ftrace_hash_rec_disable/enable()
ftrace: Remove "filter_hash" parameter from __ftrace_hash_rec_update()
ftrace: Rename dup_hash() and comment it
...
If sg2042_get_pll_ctl_setting() fails then "value" isn't initialized and
it is printed in the debug output. Initialize it to zero.
Fixes: 48cf7e0138 ("clk: sophgo: Add SG2042 clock driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/baf0a490-d5ba-4528-90ba-80399684692d@stanley.mountain
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The flag attribute of the struct clk_init_data isn't initialized before
the devm_clk_hw_register() call. This can lead to unexpected behavior
during registration.
Initialize the entire clk_init_data to zero at declaration.
Cc: stable@vger.kernel.org
Fixes: 58e1e2d2cd ("clk: davinci: cfgchip: Add TI DA8XX USB PHY clocks")
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://lore.kernel.org/r/20240718115534.41513-1-bastien.curutchet@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
- Set rtla/osnoise default threshold to 1us from 5us
The 5us default was missing noise that people cared about.
Changing it to 1us makes it work as expected.
- Restructure how sched_switch prev_comm and next_comm was being saved.
The prev_comm was being saved along with the other next fields, and the
next_comm was being saved along with the other prev fields. This is just
a cosmetic change.
- Have the allocation of pid_list use GFP_NOWAIT instead of GFP_KERNEL.
The allocation can happen in irq_work context, but luckily, the size
was by default so large, it was never triggered. But in case it ever is,
use the NOWAIT allocation in the interrupt context.
- Fix some kernel doc errors.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZpbRchQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qt9qAQCM/FNa1mRRlnCxMD+SrcGJmW4j/VvE
5c+QY5ezCYxGjwEA5tYwXttoZ1WHGRWCvuRSnkWidE1K0HpRyITo3BVzaQU=
=Sw4T
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
"Trivial updates for 6.11:
- Set rtla/osnoise default threshold to 1us from 5us
The 5us default was missing noise that people cared about. Changing
it to 1us makes it work as expected.
- Restructure how sched_switch prev_comm and next_comm was being saved
The prev_comm was being saved along with the other next fields, and
the next_comm was being saved along with the other prev fields.
This is just a cosmetic change.
- Have the allocation of pid_list use GFP_NOWAIT instead of GFP_KERNEL
The allocation can happen in irq_work context, but luckily, the
size was by default so large, it was never triggered. But in case
it ever is, use the NOWAIT allocation in the interrupt context.
- Fix some kernel doc errors"
* tag 'trace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
trace/pid_list: Change gfp flags in pid_list_fill_irq()
tracing/sched: sched_switch: place prev_comm and next_comm in right order
rtla/osnoise: set the default threshold to 1us
tracing: Fix trace_pid_list_free() kernel-doc
- Remove duplicate included header file linux/bootconfig.h from
lib/bootconfig.c. This is a cleanup, no behavior change.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmaWhj4bHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bdd0H/iraZ7ZOFWxCapOZI4dL
7f870j0PQG/KU7lB4jAo+3u7YyQWQTTLdhDPEOci4axsDG+56C/SVpHV0Z26SGHX
ZqcKlA/H0HT4BA3zG1leRzXC/qPYiAEdIw38NngYPYBUWhqM3qmYlrRIBeg89VrM
B4yaIJA/Uae7KAlB2dcmhmrIg86QK1iPKU6G+U5mIFecxDQmowE7z5f5pI/K/M5j
2HT2Kg1XPTtxOb15mKtA19TXbbA1IqYUvwW5jOffppKMwtiggEaOj4mLQ1MhlrP0
pEb1OJMx21MvEJYtjOXi8qsSGOhdWH8sBpxdUv21GzwRvOuG/AoaN1YKMIZCQp1K
Jjo=
=Bjzb
-----END PGP SIGNATURE-----
Merge tag 'bootconfig-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig update from Masami Hiramatsu:
- Remove duplicate included header file linux/bootconfig.h from
lib/bootconfig.c. This is a cleanup, no behavior change.
* tag 'bootconfig-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Remove duplicate included header file linux/bootconfig.h
Uprobes:
- x86/shstk: Make return uprobe work with shadow stack.
- Add uretprobe syscall which speeds up the uretprobe 10-30% faster. This
syscall is automatically used from user-space trampolines which are
generated by the uretprobe. If this syscall is used by normal
user program, it will cause SIGILL. Note that this is currently only
implemented on x86_64.
(This also has 2 fixes for adjusting the syscall number to avoid conflict
with new *attrat syscalls.)
- uprobes/perf: fix user stack traces in the presence of pending uretprobe.
This corrects the uretprobe's trampoline address in the stacktrace with
correct return address.
- selftests/x86: Add a return uprobe with shadow stack test.
- selftests/bpf: Add uretprobe syscall related tests.
. test case for register integrity check.
. test case with register changing case.
. test case for uretprobe syscall without uprobes (expected to be failed).
. test case for uretprobe with shadow stack.
- selftests/bpf: add test validating uprobe/uretprobe stack traces
- MAINTAINERS: Add uprobes entry. This does not specify the tree but to
clarify who maintains and reviews the uprobes.
Kprobes:
- tracing/kprobes: Test case cleanups. Replace redundant WARN_ON_ONCE() +
pr_warn() with WARN_ONCE() and remove unnecessary code from selftest.
- tracing/kprobes: Add symbol counting check when module loads. This
checks the uniqueness of the probed symbol on modules. The same check
has already done for kernel symbols.
(This also has a fix for build error with CONFIG_MODULES=n)
Cleanup:
- Add MODULE_DESCRIPTION() macros for fprobe and kprobe examples.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmaWYxwbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bsUgH/3JcSzDZujQWCZ1f4fJn
QecvTFSYcCl6ck8+/3wm4EsgeCXIFOyPnoPc7k2Gm+l6Dlk1DKGV6wV4tuKFUq9X
9mplcwoVA0Ln+EX9zv9v4s99yUGxcU9xjgC9XT7J52SvqYncPIi6dR0Z9wlJBmyd
Bx3cZk+wSzCYaoqYngI2fKlzsEcYgDIP999fQPRi0HGzNZujc4xeJyjCTC/48yWO
9kreRQq6wFdgRQTwMcR/fKPDKIGZQCU8jkXv5crVV5K3rNaBcwBmCJJMP8PzPU0V
UQ0+8RZK+Qk8SBwXcMNVRqm/efTderob4IYxP8OBe5wjAIE7+vu8r6sqwxRIS54M
Cyg=
=DRSr
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
"Uprobes:
- x86/shstk: Make return uprobe work with shadow stack
- Add uretprobe syscall which speeds up the uretprobe 10-30% faster.
This syscall is automatically used from user-space trampolines
which are generated by the uretprobe. If this syscall is used by
normal user program, it will cause SIGILL. Note that this is
currently only implemented on x86_64.
(This also has two fixes for adjusting the syscall number to avoid
conflict with new *attrat syscalls.)
- uprobes/perf: fix user stack traces in the presence of pending
uretprobe. This corrects the uretprobe's trampoline address in the
stacktrace with correct return address
- selftests/x86: Add a return uprobe with shadow stack test
- selftests/bpf: Add uretprobe syscall related tests.
- test case for register integrity check
- test case with register changing case
- test case for uretprobe syscall without uprobes (expected to fail)
- test case for uretprobe with shadow stack
- selftests/bpf: add test validating uprobe/uretprobe stack traces
- MAINTAINERS: Add uprobes entry. This does not specify the tree but
to clarify who maintains and reviews the uprobes
Kprobes:
- tracing/kprobes: Test case cleanups.
Replace redundant WARN_ON_ONCE() + pr_warn() with WARN_ONCE() and
remove unnecessary code from selftest
- tracing/kprobes: Add symbol counting check when module loads.
This checks the uniqueness of the probed symbol on modules. The
same check has already done for kernel symbols
(This also has a fix for build error with CONFIG_MODULES=n)
Cleanup:
- Add MODULE_DESCRIPTION() macros for fprobe and kprobe examples"
* tag 'probes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
MAINTAINERS: Add uprobes entry
selftests/bpf: Change uretprobe syscall number in uprobe_syscall test
uprobe: Change uretprobe syscall scope and number
tracing/kprobes: Fix build error when find_module() is not available
tracing/kprobes: Add symbol counting check when module loads
selftests/bpf: add test validating uprobe/uretprobe stack traces
perf,uprobes: fix user stack traces in the presence of pending uretprobes
tracing/kprobe: Remove cleanup code unrelated to selftest
tracing/kprobe: Integrate test warnings into WARN_ONCE
selftests/bpf: Add uretprobe shadow stack test
selftests/bpf: Add uretprobe syscall call from user space test
selftests/bpf: Add uretprobe syscall test for regs changes
selftests/bpf: Add uretprobe syscall test for regs integrity
selftests/x86: Add return uprobe shadow stack test
uprobe: Add uretprobe syscall to speed up return probe
uprobe: Wire up uretprobe system call
x86/shstk: Make return uprobe work with shadow stack
samples: kprobes: add missing MODULE_DESCRIPTION() macros
fprobe: add missing MODULE_DESCRIPTION() macro
Similarly to PCI where msi-map/msi-mask are used to compute the full RID
(aka DID in ITS speak), use the msi-parent as the discovery mechanism,
since there is no way a device can generally express its ID.
However, since switching to a per-device MSI domain model, the domain
passed to its_pmsi_prepare() is the wrong one, and points to the device's
instead of the ITS'. Bad.
Use the parent domain instead, which is the ITS domain.
Fixes: 80b63cc1cc146 ("irqchip/gic-v3-its: Switch platform MSI to MSI parent")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240718075804.2245733-1-maz@kernel.org
Since 6adb35ff43a16 ("irqchip/gic-v3-its: Provide MSI parent for
PCI/MSI[-X]"), the primary domain a PCI device allocates its interrupts
from is the one that is directly attached to the device itself.
By virtue of being a PCI device, it has no OF node.
This domain is (through more layer than it is worth describing)
passed to its_pci_msi_prepare(), which tries to compute the
full RID that is presented to the ITS by the device. This is ultimately
done by calling pci_msi_domain_get_msi_rid(), passing both the
domain and the PCI device as arguments.
The baked-in assumption is that either the domain that is passed
to pci_msi_domain_get_msi_rid() describes an interrupt controller
with either an OF node or an entry in an ACPI IORT table.
In this case, it is *neither*. This domain is does not represent
anything firmware-based, but just an allocation unit for the device.
As a result, it fails to provide the full RID (which requires inspecting
the msi-map/msi-mask properties in the DT), and stick to the BDF, which
isn't very useful.
Tragedy follows with a litany of devices that randomly die as they fail to
see any MSI (because the RID is wrong) or fail to get an allocation
(because they try to steal LPIs from their neighbour's pool).
This will happen on any system where a single ITS is shared by multiple
root ports and end-points with overlapping BDF numbers, and has the
topology described in the device-tree. Simpler DT topologies will luckily
work, and so will ACPI-based systems.
Solve it by pointing pci_msi_domain_get_msi_rid() at the *parent* domain,
which is the ITS, resulting in a correct mapping and a restored happiness
in my personal zoo.
Fixes: 6adb35ff43a16 ("irqchip/gic-v3-its: Provide MSI parent for PCI/MSI[-X]")
Reported-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240717195937.2240400-1-maz@kernel.org
Now that the platform MSI hack is gone, nothing needs to know about struct
msi_device_data outside of the core code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142236.003295177@linutronix.de
All related domains provide MSI parent functionality, so the fallback code
to the original platform MSI implementation is not longer required.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.881677325@linutronix.de
All platform MSI users and the PCI/MSI code handle per device MSI domains
when the irqdomain associated to the device provides MSI parent
functionality.
Remove the "global" platform domain related code and provide the MSI parent
functionality by filling in msi_parent_ops.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.820275215@linutronix.de
All platform MSI users and the PCI/MSI code handle per device MSI domains
when the irqdomain associated to the device provides MSI parent
functionality.
Remove the "global" platform domain related code and provide the MSI parent
functionality by filling in msi_parent_ops.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.759892514@linutronix.de
All platform MSI users and the PCI/MSI code handle per device MSI domains
when the irqdomain associated to the device provides MSI parent
functionality.
Remove the "global" platform domain related code and provide the MSI parent
functionality by filling in msi_parent_ops.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.699780279@linutronix.de
The core infrastructure has everything in place to switch ICU to per
device MSI domains and avoid the convoluted construct of the existing
platform-MSI layering violation.
The new infrastructure provides a wired interrupt specific interface in the
MSI core which converts the 'hardware interrupt number + trigger type'
allocation which is required for wired interrupts in the regular irqdomain
code to a normal MSI allocation.
The hardware interrupt number and the trigger type are stored in the MSI
descriptor device cookie by the core code so the ICU specific code can
retrieve them.
The new per device domain is only instantiated when the irqdomain which is
associated to the ICU device provides MSI parent functionality. Up to
that point it invokes the existing code. Once the parent is converted the
code for the current platform-MSI mechanism is removed.
The new domain shares the interrupt chip callbacks and the translation
function. The only new functionality aside of filling out the
msi_domain_templates is a domain specific set_desc() callback, which will go
away once all platform-MSI code has been converted.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.635015886@linutronix.de
All platform MSI users and the PCI/MSI code handle per device MSI domains
when the irqdomain associated to the device provides MSI parent
functionality.
Remove the "global" platform domain related code and provide the MSI parent
functionality by filling in msi_parent_ops.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.574932935@linutronix.de
All platform MSI users and the PCI/MSI code handle per device MSI domains
when the irqdomain associated to the device provides MSI parent
functionality.
Remove the "global" PCI/MSI and platform domain related code and provide
the MSI parent functionality by filling in msi_parent_ops.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.514419280@linutronix.de
The MBI chip creates two MSI domains:
- PCI/MSI
- Platform device domain
Both have the MBI domain as parent and differ slightly in the interrupt
chip callbacks and the platform device domain supports level type
signaling.
Convert it over to the MSI parent domain mechanism by:
- Providing the required templates
- Implementing a custom init_dev_msi_info() callback which sets the chip
callbacks and the level support flags depending on the domain bus token
type of the per device domain.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.455849114@linutronix.de
Now that ITS provides the MSI parent domain, remove the unused fallback
code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Shivamurthy Shastri <shivamurthy.shastri@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240623142235.333333826@linutronix.de
