Allow user space to configure FIB rules that match on the source and
destination ports with a mask, now that support has been added to the
FIB rule core and the IPv4 and IPv6 address families.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250217134109.311176-6-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend IPv6 FIB rules to match on source and destination ports using a
mask. Note that the mask is only set when not matching on a range.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250217134109.311176-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend IPv4 FIB rules to match on source and destination ports using a
mask. Note that the mask is only set when not matching on a range.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250217134109.311176-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for configuring and deleting rules that match on source and
destination ports using a mask as well as support for dumping such rules
to user space.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250217134109.311176-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add attributes that allow matching on source and destination ports with
a mask. Matching on the source port with a mask is needed in deployments
where users encode path information into certain bits of the UDP source
port.
Temporarily set the type of the attributes to 'NLA_REJECT' while support
is being added.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250217134109.311176-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BCM53101 is a ethernet switch, very similar to the BCM53115.
Enable support for it, in the existing b53 dsa driver.
Signed-off-by: Torben Nielsen <torben.nielsen@prevas.dk>
Signed-off-by: Claus Stovgaard <claus.stovgaard@prevas.dk>
Link: https://patch.msgid.link/20250217080503.1390282-1-claus.stovgaard@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
or aren't considered necessary for -stable kernels.
10 are for MM and 8 are for non-MM. All are singletons, please see the
changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ7aKTwAKCRDdBJ7gKXxA
jo9eAQD0GBh7LaeobM+OJBN0E+u/wKySR/QpGfQX1h/uTpcOPAEA+Q5yaNcmFIzO
NB/htGoMpW2F9gru3pwAT7CgnE3qeg8=
=Y0sw
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-02-19-17-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"18 hotfixes. 5 are cc:stable and the remainder address post-6.13
issues or aren't considered necessary for -stable kernels.
10 are for MM and 8 are for non-MM. All are singletons, please see the
changelogs for details"
* tag 'mm-hotfixes-stable-2025-02-19-17-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
test_xarray: fix failure in check_pause when CONFIG_XARRAY_MULTI is not defined
kasan: don't call find_vm_area() in a PREEMPT_RT kernel
MAINTAINERS: update Nick's contact info
selftests/mm: fix check for running THP tests
mm: hugetlb: avoid fallback for specific node allocation of 1G pages
memcg: avoid dead loop when setting memory.max
mailmap: update Nick's entry
mm: pgtable: fix incorrect reclaim of non-empty PTE pages
taskstats: modify taskstats version
getdelays: fix error format characters
mm/migrate_device: don't add folio to be freed to LRU in migrate_device_finalize()
tools/mm: fix build warnings with musl-libc
mailmap: add entry for Feng Tang
.mailmap: add entries for Jeff Johnson
mm,madvise,hugetlb: check for 0-length range after end address adjustment
mm/zswap: fix inconsistency when zswap_store_page() fails
lib/iov_iter: fix import_iovec_ubuf iovec management
procfs: fix a locking bug in a vmcore_add_device_dump() error path
We don't want to be holding the srcu lock while waiting on btree write
completions - easily fixed.
Reported-by: Janpieter Sollie <janpieter.sollie@edpnet.be>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We had some error handling confusion here;
-BCH_ERR_missing_indirect_extent is thrown by
trans_trigger_reflink_p_segment(); at this point we haven't decide
whether we're generating an error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Error handling was wrong, causing unhandled transaction restart errors.
check_directory_size() was also inefficient, since keys in multiple
snapshots would be iterated over once for every snapshot. Convert it to
the same scheme used for i_sectors and subdir count checking.
Cc: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If the reparse point was not handled (indicated by the -EOPNOTSUPP from
ops->parse_reparse_point() call) but reparse tag is of type name surrogate
directory type, then treat is as a new mount point.
Name surrogate reparse point represents another named entity in the system.
From SMB client point of view, this another entity is resolved on the SMB
server, and server serves its content automatically. Therefore from Linux
client point of view, this name surrogate reparse point of directory type
crosses mount point.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This would help to track and detect by caller if the reparse point type was
processed or not.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If a file size has bits 0x410 = ATTR_DIRECTORY | ATTR_REPARSE set
then during queryinfo (stat) the file is regarded as a directory
and subsequent opens can fail. A simple test example is trying
to open any file 1040 bytes long when mounting with "posix"
(SMB3.1.1 POSIX/Linux Extensions).
The cause of this bug is that Attributes field in smb2_file_all_info
struct occupies the same place that EndOfFile field in
smb311_posix_qinfo, and sometimes the latter struct is incorrectly
processed as if it was the first one.
Reported-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Tested-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in order to avoid ending up with flexible-array members in the
middle of other structs, we use the `__struct_group()` helper to
separate the flexible arrays from the rest of the members in the
flexible structures. We then use the newly created tagged `struct
smb2_file_link_info_hdr` and `struct smb2_file_rename_info_hdr`
to replace the type of the objects causing trouble: `rename_info`
and `link_info` in `struct smb2_compound_vars`.
We also want to ensure that when new members need to be added to the
flexible structures, they are always included within the newly created
tagged structs. For this, we use `static_assert()`. This ensures that the
memory layout for both the flexible structure and the new tagged struct
is the same after any changes.
So, with these changes, fix 86 of the following warnings:
fs/smb/client/cifsglob.h:2335:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
fs/smb/client/cifsglob.h:2334:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Roger Quadros says:
====================
net: ethernet: ti: am65-cpsw: drop multiple functions and code cleanup
We have 2 tx completion functions to handle single-port vs multi-port
variants. Merge them into one function to make maintenance easier.
We also have 2 functions to handle TX completion for SKB vs XDP.
Get rid of them too.
Also do some minor cleanups.
====================
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop separate TX completion functions for SKB and XDP. To do that
use the SW_DATA mechanism to store ndev and skb/xdpf for TX packets.
Use BUILD_BUG_ON_MSG() to fail build if SW_DATA size exceeds whats
available. i.e. AM65_CPSW_NAV_SW_DATA_SIZE.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows us to re-use am65_cpsw_run_xdp() for zero copy
case. Add AM65_CPSW_XDP_TX case for successful XDP_TX so we don't
free the page while in flight.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In am65_cpsw_run_xdp() instead of goto followed by return, simply return.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
am65_cpsw_run_xdp() can figure out the cpu id itself.
No need to pass it around 2 functions so drop it.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The only difference between am65_cpsw_nuss_tx_compl_packets_2g() and
am65_cpsw_nuss_tx_compl_packets() is the usage of spin_lock() and
netdev_tx_completed_queue() + am65_cpsw_nuss_tx_wake at every packet
in the latter.
Insted of having 2 separate functions for TX completion, merge them
into one. This will reduce code duplication and make maintenance easier.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The rockchip_canfd driver doesn't make use of the TXE FIFO.
Although the comment states that the TXE FIFO is setup, it's actually
a setup of the RX FIFO. The regular setup of the RX FIFO follows.
Remove the duplicated setup of the RX FIFO.
Fixes: ff60bfbaf6 ("can: rockchip_canfd: add driver for Rockchip CAN-FD controller")
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Link: https://patch.msgid.link/20250219-rk3568-canfd-v1-1-453869358c72@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add USB VID/PID for the CANnectivity USB to CAN adapter firmware.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Tested-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250120133827.668977-1-henrik@brixandersen.dk
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The Remote Request Substitution bit is a dominant bit ("0") in the CAN
XL frame. As some CAN XL controllers support to access this bit a new
CANXL_RRS value has been defined for the canxl_frame.flags element.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20250124142347.7444-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Extend the J1939 stack documentation to include information about how
buffer sizes influence stack behavior, detailing handling of simple
sessions, TP, and ETP transfers.
Additionally, describe various setsockopt(2) options, including their
usage and potential error values that can be returned by the stack.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20241013181715.3488980-1-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Ciprian Costea <ciprianmarian.costea@oss.nxp.com> says:
S32G2 and S32G3 SoCs share the FlexCAN module with i.MX SoCs, with
some hardware integration particularities.
Main difference covered by this patch-set relates to interrupt
management. On S32G2/S32G3 SoC, there are separate interrupts for
state change, bus errors, MBs 0-7 and MBs 8-127 respectively.
Changes in V4:
- Updated IRQ description in bindings documentation
- Fixed some small issues with the proposed changes in the flexcan
binding documentation
Changes in V3:
- Added Vincent Mailhol's Reviewed-by tag on the second patch
- Changed to 'platform_get_irq_byname' for second range of mailboxes
- Made several rephasing in bindings doc
- Removed Frank Li's Reviewed-by tags since changes were made
afterwards.
Changes in V2:
- Separated 'FLEXCAN_QUIRK_NR_IRQ_3' quirk addition from S32G SoC
Flexcan support.
- Provided more information in dt-bindings documentation with respect
to FlexCAN module integration on S32G SoCs.
- Fixed and IRQ resource freeing management issue.
Link: https://patch.msgid.link/20250113120704.522307-1-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add device type data for S32G2/S32G3 SoC.
FlexCAN module from S32G2/S32G3 is similar with i.MX SoCs, but interrupt
management is different.
On S32G2/S32G3 SoC, there are separate interrupts for state change, bus
errors, Mailboxes 0-7 and Mailboxes 8-127 respectively.
In order to handle this FlexCAN hardware particularity, first reuse the
'FLEXCAN_QUIRK_NR_IRQ_3' quirk provided by mcf5441x's irq handling
support. Secondly, use the newly introduced
'FLEXCAN_QUIRK_SECONDARY_MB_IRQ' quirk which handles the case where two
separate mailbox ranges are controlled by independent hardware interrupt
lines.
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Link: https://patch.msgid.link/20250113120704.522307-4-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Introduce 'FLEXCAN_QUIRK_SECONDARY_MB_IRQ' quirk to handle a FlexCAN
hardware module integration particularity where two ranges of mailboxes
are controlled by separate hardware interrupt lines.
The same 'flexcan_irq' handler is used for both separate mailbox interrupt
lines, with no other changes.
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250113120704.522307-3-ciprianmarian.costea@oss.nxp.com
[mkl: flexcan_open(): change order and free irq_secondary_mb first]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add S32G2/S32G3 SoCs compatible strings.
A particularity for these SoCs is the presence of separate interrupts for
state change, bus errors, MBs 0-7 and MBs 8-127 respectively.
Increase maxItems of 'interrupts' to 4 for S32G based SoCs and keep the
same restriction for other SoCs.
Also, as part of this commit, move the 'allOf' after the required
properties to make the documentation easier to read.
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250113120704.522307-2-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over
syscon_regmap_lookup_by_phandle() combined with getting the syscon
argument. Except simpler code this annotates within one line that given
phandle has arguments, so grepping for code would be easier.
There is also no real benefit in printing errors on missing syscon
argument, because this is done just too late: runtime check on
static/build-time data. Dtschema and Devicetree bindings offer the
static/build-time check for this already.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250212-syscon-phandle-args-can-v2-4-ac9a1253396b@linaro.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
of_property_read_bool() should be used only on boolean properties.
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250212-syscon-phandle-args-can-v2-3-ac9a1253396b@linaro.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Use error handling block instead of open-coding it in one of probe
failure cases.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250212-syscon-phandle-args-can-v2-2-ac9a1253396b@linaro.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Generic probe failure message is useless: does not give information what
failed and it duplicates messages provided by the core, e.g. from memory
allocation or platform_get_irq(). It also floods dmesg in case of
deferred probe, e.g. resulting from devm_clk_get().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250212-syscon-phandle-args-can-v2-1-ac9a1253396b@linaro.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Shradha Gupta says:
====================
net: Enable Big TCP for MANA devices
Allow the max gso/gro aggregated pkt size to go up to GSO_MAX_SIZE for
MANA NIC. On Azure, this not possible without allowing the same for
netvsc NIC (as the NICs are bonded together).
Therefore, we use netif_set_tso_max_size() to set max aggregated pkt
size
to VF's tso_max_size for netvsc too, when the data path is switched over
to the VF
The first patch allows MANA to configure aggregated pkt size of up-to
GSO_MAX_SIZE
The second patch enables the same on the netvsc NIC, if the data path
for the bonded NIC is switched to the VF
---
Changes in v3
* Add ipv6_hopopt_jumbo_remove() while sending Big TCP packets
---
Changes in v2
* Instead of using 'tcp segment' throughout the patch used the words
'aggregated pkt size'
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
On Azure, increasing VF's gso/gro packet size to up-to GSO_MAX_SIZE
is not possible without allowing the same for netvsc NIC
(as the NICs are bonded together). For bonded NICs, the min of the max
aggregated pkt size of the members is propagated in the stack.
Therefore, we use netif_set_tso_max_size() to set max aggregated pkt size
to VF's packet size for netvsc too, when the data path is switched over
to the VF
Tested on azure env with Accelerated Networking enabled and disabled.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following sequence is basically illegal when dev was fetched
without lookup because dev_net(dev) might be different after holding
rtnl_net_lock():
net = dev_net(dev);
rtnl_net_lock(net);
Let's use rtnl_net_dev_lock() in unregister_netdev().
Note that there is no real bug in unregister_netdev() for now
because RTNL protects the scope even if dev_net(dev) is changed
before/after RTNL.
Fixes: 00fb982393 ("dev: Hold per-netns RTNL in (un)?register_netdev().")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250217191129.19967-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the cited commit, dev_net(dev) is fetched before holding RTNL
and passed to __unregister_netdevice_notifier_net().
However, dev_net(dev) might be different after holding RTNL.
In the reported case [0], while removing a VF device, its netns was
being dismantled and the VF was moved to init_net.
So the following sequence is basically illegal when dev was fetched
without lookup:
net = dev_net(dev);
rtnl_net_lock(net);
Let's use a new helper rtnl_net_dev_lock() to fix the race.
It fetches dev_net_rcu(dev), bumps its net->passive, and checks if
dev_net_rcu(dev) is changed after rtnl_net_lock().
[0]:
BUG: KASAN: slab-use-after-free in notifier_call_chain (kernel/notifier.c:75 (discriminator 2))
Read of size 8 at addr ffff88810cefb4c8 by task test-bridge-lag/21127
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:123)
print_report (mm/kasan/report.c:379 mm/kasan/report.c:489)
kasan_report (mm/kasan/report.c:604)
notifier_call_chain (kernel/notifier.c:75 (discriminator 2))
call_netdevice_notifiers_info (net/core/dev.c:2011)
unregister_netdevice_many_notify (net/core/dev.c:11551)
unregister_netdevice_queue (net/core/dev.c:11487)
unregister_netdev (net/core/dev.c:11635)
mlx5e_remove (drivers/net/ethernet/mellanox/mlx5/core/en_main.c:6552 drivers/net/ethernet/mellanox/mlx5/core/en_main.c:6579) mlx5_core
auxiliary_bus_remove (drivers/base/auxiliary.c:230)
device_release_driver_internal (drivers/base/dd.c:1275 drivers/base/dd.c:1296)
bus_remove_device (./include/linux/kobject.h:193 drivers/base/base.h:73 drivers/base/bus.c:583)
device_del (drivers/base/power/power.h:142 drivers/base/core.c:3855)
mlx5_rescan_drivers_locked (./include/linux/auxiliary_bus.h:241 drivers/net/ethernet/mellanox/mlx5/core/dev.c:333 drivers/net/ethernet/mellanox/mlx5/core/dev.c:535 drivers/net/ethernet/mellanox/mlx5/core/dev.c:549) mlx5_core
mlx5_unregister_device (drivers/net/ethernet/mellanox/mlx5/core/dev.c:468) mlx5_core
mlx5_uninit_one (./include/linux/instrumented.h:68 ./include/asm-generic/bitops/instrumented-non-atomic.h:141 drivers/net/ethernet/mellanox/mlx5/core/main.c:1563) mlx5_core
remove_one (drivers/net/ethernet/mellanox/mlx5/core/main.c:965 drivers/net/ethernet/mellanox/mlx5/core/main.c:2019) mlx5_core
pci_device_remove (./include/linux/pm_runtime.h:129 drivers/pci/pci-driver.c:475)
device_release_driver_internal (drivers/base/dd.c:1275 drivers/base/dd.c:1296)
unbind_store (drivers/base/bus.c:245)
kernfs_fop_write_iter (fs/kernfs/file.c:338)
vfs_write (fs/read_write.c:587 (discriminator 1) fs/read_write.c:679 (discriminator 1))
ksys_write (fs/read_write.c:732)
do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
RIP: 0033:0x7f6a4d5018b7
Fixes: 7fb1073300 ("net: Hold rtnl_net_lock() in (un)?register_netdevice_notifier_dev_net().")
Reported-by: Yael Chemla <ychemla@nvidia.com>
Closes: https://lore.kernel.org/netdev/146eabfe-123c-4970-901e-e961b4c09bc3@nvidia.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250217191129.19967-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix incorrect data offset read in the pd692x0_pi_get_pw_limit callback.
The issue was previously unnoticed as it was only used by the regulator
API and not thoroughly tested, since the PSE is mainly controlled via
ethtool.
The function became actively used by ethtool after commit 3e9dbfec49
("net: pse-pd: Split ethtool_get_status into multiple callbacks"),
which led to the discovery of this issue.
Fix it by using the correct data offset.
Fixes: a87e699c9d ("net: pse-pd: pd692x0: Enhance with new current limit and voltage read callbacks")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250217134812.1925345-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Willem de Bruijn says:
====================
net: deduplicate cookie logic
Reuse standard sk, ip and ipv6 cookie init handlers where possible.
Avoid repeated open coding of the same logic.
Harmonize feature sets across protocols.
Make IPv4 and IPv6 logic more alike.
Simplify adding future new fields with a single init point.
====================
Link: https://patch.msgid.link/20250214222720.3205500-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This initializes tclass and dontfrag before cmsg parsing, removing the
need for explicit checks against -1 in each caller.
Leave hlimit set to -1, because its full initialization
(in ip6_sk_dst_hoplimit) requires more state (dst, flowi6, ..).
This also prepares for calling sockcm_init in a follow-on patch.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250214222720.3205500-7-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Do not modify socket fields if it can be avoided.
The current code predates the introduction of ip cookies in commit
aa66158145 ("ipv4: processing ancillary IP_TOS or IP_TTL"). Now that
cookies exist and support tos, update that field directly.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250214222720.3205500-6-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Initialize the ip cookie tos field when initializing the cookie, in
ipcm_init_sk.
The existing code inverts the standard pattern for initializing cookie
fields. Default is to initialize the field from the sk, then possibly
overwrite that when parsing cmsgs (the unlikely case).
This field inverts that, setting the field to an illegal value and
after cmsg parsing checking whether the value is still illegal and
thus should be overridden.
Be careful to always apply mask INET_DSCP_MASK, as before.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250214222720.3205500-5-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
