mirror of
https://github.com/torvalds/linux.git
synced 2026-09-19 09:08:02 +02:00
2aaf67f051
52458 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
2aaf67f051
|
bpf: Reject rdonly/rdwr_buf_size kfunc arguments that exceed u32 max
check_kfunc_args() detects a kfunc argument named rdonly_buf_size or
rdwr_buf_size and stores reg->var_off.value into meta->r0_size, a u64,
and does not bound it. check_kfunc_call() later copies that value into
the returned register's mem_size field:
meta->r0_size = reg->var_off.value;
...
regs[BPF_REG_0].mem_size = meta.r0_size;
regs[BPF_REG_0].mem_size is u32. A constant whose upper 32 bits are set
gets truncated instead of causing a load-time rejection, so the verifier
records a PTR_TO_MEM register with an approximately 4 GiB mem_size for
whatever allocation the kfunc returned. A later access check against
that register uses the truncated, wrong bound.
Reject rdonly_buf_size/rdwr_buf_size values that exceed U32_MAX at the
point meta->r0_size is set.
Fixes:
|
||
|
|
2cb5f4ca69 |
bpf: Drop scalar id on sign-extending narrowing stack fills
When a spilled scalar is filled back with a sign-extending narrowing load
(BPF_MEMSX), check_stack_read_fixed_off() copies the spilled register
including its scalar id, but coerce_reg_to_size_sx() then sign-extends the
filled register's value. If the same slot is also filled with a plain
zero-extending load (BPF_MEM), both destination registers share the id yet
hold different values. A later 'if <zext-reg> == const' then refines the
sign-extended register through sync_linked_regs() to a value it does not
have at runtime (e.g. the verifier believes 0x80000000 while the register
is 0xffffffff80000000), which can be turned into an out-of-bounds access.
Drop the shared scalar id at the sign-extension site in check_mem_access()
when sign extension actually changes the value, mirroring the BPF_MOVSX
handling in check_alu_op() (no_sext = reg_umax < 2^(size*8-1)).
Fixes:
|
||
|
|
36ffa86c42
|
bpf: Fix security_bpf_map_create error handling
Commit |
||
|
|
f1c2792257 |
bpf: Reject programs with inlined helpers if JIT is not available
When an architecture (such as LoongArch, ARM64, and RISC-V) implements
bpf_jit_inlines_helper_call(), the verifier skips rewriting the helper
call offset (insn->imm) in bpf_do_misc_fixups(). This is because the
helper is expected to be inlined by the JIT compiler later. Therefore,
insn->imm remains as the raw helper enum ID.
However, if JIT is disabled at runtime (net.core.bpf_jit_enable=0) or
if JIT compilation fails dynamically (e.g., due to OOM), the program
falls back to the BPF interpreter.
When the interpreter executes (__bpf_call_base + insn->imm) with the
unpatched raw ID, it jumps into an invalid address space, triggering
an instruction alignment fault or a kernel panic.
Although these helpers have valid C implementations in the kernel, the
omission of offset rewriting makes runtime interpreter fallback fatal.
Fix this by setting 'prog->jit_required = 1' when helper call rewriting
is skipped for JIT inlining. This ensures that such programs are safely
rejected if JIT is not available, preventing the runtime kernel panic.
Fixes:
|
||
|
|
9a6df65d5c |
bpf: Introduce jit_required flag and remove bpf_prog_has_kfunc_call()
Introduce a 'jit_required' bitfield flag in struct bpf_prog to track whether a BPF program strictly requires the JIT compiler to run. This prevents a dangerous runtime fallback to the interpreter for features that are only implemented in the JIT compiler. Currently, bpf_prog_has_kfunc_call() is used only for kernel function calls, replace the kfunc-specific helper with the new 'jit_required' flag. This makes it easy to support other JIT-only BPF features, such as inlined helpers. Suggested-by: Alexei Starovoitov <ast@kernel.org> Suggested-by: KaFai Wan <kafai.wan@linux.dev> Suggested-by: Leon Hwang <leon.hwang@linux.dev> Acked-by: Leon Hwang <leon.hwang@linux.dev> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> |
||
|
|
47b079e211
|
bpf: Fix use-after-free on mm_struct in bpf_find_vma()
bpf_find_vma() reads task->mm and calls mmap_read_trylock(mm) without holding a reference on the mm. On a foreign task, a concurrent exit_mm() can free the mm_struct between the lockless read and the trylock, resulting in a use-after-free. mm_struct is not SLAB_TYPESAFE_BY_RCU. For the current task, task->mm is stable. For a foreign task, pin the mm under task->alloc_lock and release it with mmput_async(), mirroring commit |
||
|
|
ff755b6007
|
bpf: Account scratch buffer in bpf_prog_calc_tag
bpf_prog_calc_tag() copies the instructions into a plain vmalloc() scratch buffer to blind the map fds before hashing. The buffer scales with the program, up to ~8MB at the 1M instruction limit, and is allocated on every program load, but unlike the rest of the load-time scratch memory it is not charged to the loader's memcg. Use GFP_KERNEL_ACCOUNT to account it like the other allocations scoped to the verification/load. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20260708211537.371874-5-daniel@iogearbox.net Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> |
||
|
|
42560699a8
|
bpf: Account insn_aux_data allocation in bpf_check
The insn_aux_data array is allocated with a plain vzalloc(), while every other allocation scoped to the verification - verifier states, explored states, the cfg/scc arrays, liveness masks, jump history - is charged to the loader's memcg via GFP_KERNEL_ACCOUNT. At 136 bytes per instruction it is one of the largest verification-time buffers, in the range of ~130MB for a program at the 1M instruction limit (worst case), and it lives across the whole verification. The buffer is also inconsistent with itself: when instruction patching grows it, the vrealloc() in bpf_patch_insn_data() already passes GFP_KERNEL_ACCOUNT. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20260708211537.371874-4-daniel@iogearbox.net Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> |
||
|
|
5e5e94d87d
|
bpf: Give vmlinux BTF init its own mutex
bpf_get_btf_vmlinux() serializes the lazy vmlinux BTF parse with bpf_verifier_lock, the same mutex bpf_check() holds across the whole verification of an unprivileged program (if enabled; it's disabled by default). The latter can potentially stall the mutex holder for a long time (e.g. via userfaultfd), and therefore block first-time bpf_get_btf_vmlinux() caller from any context, including privileged program loads. Give the vmlinux BTF initialization a dedicated btf_vmlinux_lock so it is independent of the unprivileged verification mutex. The parse only needs mutual exclusion against itself. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20260708211537.371874-3-daniel@iogearbox.net Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> |
||
|
|
92863e6780
|
bpf: Fix vmlinux BTF prep race in bpf_get_btf_vmlinux
bpf_get_btf_vmlinux() lazily parses the vmlinux BTF under the
bpf_verifier_lock, but publishes the result through a plain store
and re-checks it through a plain lockless load. Nothing orders
the stores initializing the struct btf inside btf_parse_vmlinux()
against the store publishing the pointer: On a weakly ordered
arch, a concurrent first-time caller taking the lockless fast
path could in principle observe the pointer before the parsed
contents are visible. The mutex_unlock() does not help such a
reader given it only synchronizes with a later acquisition of the
same lock. Thus, publish the pointer with smp_store_release()
and read it on the fast path with smp_load_acquire().
Acquire semantics are needed rather than a dependency-ordered
READ_ONCE(): btf_parse_vmlinux() also populates globals outside
the returned object (e.g. bpf_ctx_convert.t). An address
dependency would only order accesses performed through the
pointer and not cover other globals.
Fixes:
|
||
|
|
a2d784869a
|
libbpf: Drop in-loader metadata check for load-time verification
The signed gen_loader used to police its own metadata map from within BPF: emit_signature_match() read the kernel-cached map->sha[] back through hardcoded struct bpf_map offsets and compared it against a hash that compute_sha_update_offsets() baked into the signed instructions, after a BPF_OBJ_GET_INFO_BY_FD round-trip to populate map->sha[]. The kernel now verifies the metadata at BPF_PROG_LOAD time by folding the frozen contents of the loader's exclusive fd_array maps into the signature, so the loader no longer checks anything itself. Generated loaders thus carry no verification logic of their own anymore: Nothing in the signing chain depends on emitted loader bytecode doing the right thing. On the loading side, skel_internal.h now sets fd_array_cnt for a signed load so the kernel scans fd_array for the exclusive metadata map - still frozen, as the kernel requires - and the BPF_OBJ_GET_INFO_BY_FD round-trip to populate map->sha[] is gone. The struct bpf_map layout BUILD_BUG_ON()s on the kernel side are removed as well: they only pinned the ABI for the in-BPF read of map->sha[] that is no longer needed. Same for the map->excl member. Note: gen_hash is retained; it still marks a loader as signed so an untrusted host cannot re-dimension maps or override initial values now covered by the signature. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20260708075343.358712-4-daniel@iogearbox.net Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> |
||
|
|
b707068e0e
|
bpf: Verify signed loader metadata at load time
A signed gen_loader program carries the programs, maps and relocations
it installs in a metadata array map. The loader instructions are covered
by the PKCS#7 signature, but the metadata map is not: Today the loader
compares the map contents from within BPF against a hash baked into its
(signed) instructions, using the kernel-cached map hash. The kernel
itself never actually attests that the metadata the loader installs is
the metadata that was signed.
This split is the core of the long-standing objection to the BPF signing
scheme from the LSM / integrity side: the integrity check of a light
skeleton only completes once the loader program runs, that is, after the
security_bpf_prog_load() hook, so at admission time an LSM observes a
program whose payload has not yet been verified. Auditing the chain
link is also not a purely cryptographic operation: whoever signs or
reviews an lskel has to disassemble the loader's preamble to convince
themselves that the embedded hash check is present and correct [0][1].
Two acceptable fixes were identified in those threads: Complete the
integrity check before the admission hook fires, or add a second hook
that collects the verification result after the loader ran [2]. Covering
both the loader and its maps directly with the PKCS#7 signature is what
Blaise Boscaccy's patchsets proposed in several forms. Let's implement
the former, without growing the UAPI, and in particular as a single
unified scheme where the signature spans the raw bytes rather than
derived hashes.
A signed loader binds its metadata map(s) through the existing fd_array,
and an exclusive map is already bound to a program digest (excl_prog_hash).
So when a signature is present, collect the exclusive maps from fd_array
and append their frozen contents to the instructions before verification:
The signature now covers insns || metadata_0 || metadata_1 || [...] in
the fd_array order, and verification completes in bpf_check(), once the
fd_array maps are resolved into used_maps, before the LSM admission hook
and the rest of verification. A program is either BPF_SIG_UNSIGNED or
BPF_SIG_VERIFIED, with nothing in between. While folding the fd_array
maps, a non-exclusive map bound to a signed program is rejected, so every
map folded into the signature is exclusive. A signed loader that fails
to cover its metadata thus does not load, and BPF_SIG_VERIFIED always
means the instructions and every exclusive map are authentic. The maps
must be frozen so the hashed bytes cannot change before the loader runs;
the map <-> program digest binding is enforced by the verifier for every
used map. Binding maps through fd_array_cnt makes the verifier resolve
and excl-check them (excl_prog_sha vs prog->digest) before it would
otherwise compute the digest, so compute prog->digest up front in
bpf_check(), over the unmodified instructions the signature covers, for
a load that folds metadata.
Unsigned programs are not affected by the signature path; for them the
LSM admission hook merely moves below fd_array resolution, with minimal
bounded work in between. Note, signed loaders generated by older libbpf/
bpftool versions need to be regenerated; some of the recent fixes we've
had on the signed loader side require the latter already to close gaps.
Finally, some remarks around the security_bpf_prog_load() placement
given there was discussion on whether a new hook is needed or the existing
security_bpf_prog() hook should be reused [3]: For a new hook it would
mean that just for loading a single BPF program it has to pass through
four layers of LSM hooks:
1) security_bpf (cmd=PROG_LOAD): for gating various bpf subcmds
2) security_bpf_prog_load: historical admission hook (CAP/token,
prog_type, attach point), pre-verification
3) security_bpf_prog_verify_signature: newly asked admission hook,
same role as 2), plus the BPF signature verdict
4) security_bpf_prog: gate handing the prog fd back to userspace,
verification done & signature verified
The use-cases of 2) and 3) conflate, thus BPF community prefers to just
keep a total of 3 LSM hooks (as-is today): 3) makes 2) incoherent given
they are the /same class/ of hook, that is, access-control admission on
the load and split only by _what_ they can see. Worse, with the split,
for a signed BPF program security_bpf_prog_load 2) admits a program whose
signature has not been checked, so a policy gating at 2) is structurally
unable to express "admit only verified" and every such policy is forced
onto 3) *anyway*. In other words, one doesn't get two complementary hooks,
but rather, one real admission hook aka 3) plus a now-degraded /legacy/
hook 2) that can't answer the question operators actually want to ask.
Reusing security_bpf_prog() 4) for admission is no alternative either:
it fires only after the entire verifier (and JIT) pipeline ran, so
denying a not-yet-verified program at that point burns exactly the
work a denial is supposed to avoid, and by then the program has an id
assigned and the kallsyms/perf/audit load events fired. Policies are
free to also consume the signature verdict at 4), but admission control
belongs into security_bpf_prog_load(). Hence the latter remains the only
admission hook, merely moved past signature verification; with moving
large allocations further down into the BPF verifier, there is now only
minimal work between the old and new location: The preparation work in
bpf_check() is reordered such that only the minimally necessary setup
happens up front: Allocating the env, initializing the verifier log and
resolving the fd_array that a signed BPF metadata map needs. The worst
case allocation up until security_bpf_prog_load() is ~90K which is the
env itself (~54K) plus the continuous fd_array cache (at most 32K). The
insn_aux_data array is moved into a later stage in the verification.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/2f71d6c03698eb17d51f7247efde777627ee578a.camel@HansenPartnership.com [0]
Link: https://lore.kernel.org/lkml/ecf0521ed302db672672ebfbc670ecfba36a6e00.camel@HansenPartnership.com [1]
Link: https://lore.kernel.org/bpf/88703f00d5b7a779728451008626efa45e42db3d.camel@HansenPartnership.com [2]
Link: https://lore.kernel.org/bpf/DJOFY21DYUI4.19WKQ3NPZ4H5R@gmail.com [3]
Link: https://lore.kernel.org/bpf/20260708075343.358712-3-daniel@iogearbox.net
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
||
|
|
d5a8539239
|
bpf: Resolve and cache fd_array objects at load time
The fd_array passed to BPF_PROG_LOAD carries the map and module BTF file
descriptors a program binds. The verifier reads it more than once during
a load: process_fd_array() walks it to bind the maps and BTFs, and
check_and_resolve_insns() and the kfunc BTF resolver later read it again
to resolve the program's BPF_PSEUDO_MAP_IDX* and module kfunc refs.
For signed BPF, we need these upfront in memory, thus resolve each fd to
its object once and cache it by fd_array index, then bind that cached
object for the rest of the load. env->fd_array becomes a small per-slot
{map, btf} cache rather than a bpfptr_t; every later reference is then
an in-bounds lookup of an already-resolved object, and an index outside
the cache is rejected instead of read from user memory:
- continuous (fd_array_cnt given): the caller declares the length and
every entry is resolved and bound up front (used also by the BPF
signed loader)
- sparse (no fd_array_cnt): left as the legacy path with no fd_array
cache; each reference reads its fd from the caller's fd_array and
resolves it on the spot. Deduplication in used_maps and the kfunc BTF
table keeps this correct, and only unsigned programs use this shape.
Split these into separate helpers to make it easier to follow.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/bpf/20260708075343.358712-2-daniel@iogearbox.net
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
||
|
|
ac65c710cc |
bpf: Reject writes through untrusted BTF pointers
check_ptr_to_btf_access() lets program-type btf_struct_access callbacks
validate writes before the default BTF access path rejects non-read
accesses. That bypasses the read-only policy for untrusted BTF pointers
created by helpers such as bpf_rdonly_cast().
Reject non-read accesses through PTR_UNTRUSTED BTF pointers at the
common entry point, before the callback branch to handle all cases.
Fixes:
|
||
|
|
1f737e46ca
|
bpf: Remove artificial limitations on pointer types eligible for spilling
The verifier loses precision when simulating stack spills for the following register types: - PTR_TO_TP_BUFFER - PTR_TO_INSN - CONST_PTR_TO_DYNPTR These types are not allow-listed in the is_spillable_regtype(), because of that check_stack_write_fixed_off() takes the branch that marks the slots STACK_MISC. There are no technical reasons for this limitation. This commit replaces an explicit list of pointer types in is_spillable_regtype() with explicit list of non-pointer types. The function is renamed to is_pointer_regtype() for clarity. Reported-by: Andrii Nakryiko <andrii.nakryiko@gmail.com> Suggested-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/bpf/20260707-missing-spillable-types-v1-1-44a92121dc41@gmail.com Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> |
||
|
|
be39165224
|
bpf, sockmap: Disallow update and delete from tc, xdp, socket_filter and flow_dissector
sock_map_update_common() and __sock_map_delete() hold stab->lock and call
sock_map_unref() -> sock_map_del_link(), which takes sk_callback_lock for
write. That gives the order stab->lock -> sk_callback_lock.
The reverse order comes from the SK_SKB stream parser.
sk_psock_strp_data_ready() holds sk_callback_lock for read, and after the
verdict tcp_bpf_strp_read_sock() acks the consumed data inline via
__tcp_cleanup_rbuf(). The ACK goes out egress, where a sched_cls program
deletes from the sockmap and takes stab->lock:
WARNING: possible circular locking dependency detected
------------------------------------------------------
syz.9.8824 is trying to acquire lock:
(&stab->lock){+.-.}-{3:3}, at: __sock_map_delete net/core/sock_map.c:421
but task is already holding lock:
(clock-AF_INET){++.-}-{3:3}, at: sk_psock_strp_data_ready net/core/skmsg.c:1173
-> #1 (clock-AF_INET){++.-}-{3:3}:
_raw_write_lock_bh
sock_map_del_link net/core/sock_map.c:167
sock_map_unref net/core/sock_map.c:184
sock_map_update_common net/core/sock_map.c:509
sock_map_update_elem_sys net/core/sock_map.c:588
map_update_elem kernel/bpf/syscall.c:1805
-> #0 (&stab->lock){+.-.}-{3:3}:
_raw_spin_lock_bh
__sock_map_delete net/core/sock_map.c:421
sock_map_delete_elem net/core/sock_map.c:452
bpf_prog_06044d24140080b6
tcx_run net/core/dev.c:4451
sch_handle_egress net/core/dev.c:4541
__dev_queue_xmit net/core/dev.c:4808
...
tcp_bpf_strp_read_sock net/ipv4/tcp_bpf.c:701
strp_data_ready net/strparser/strparser.c:402
sk_psock_strp_data_ready net/core/skmsg.c:1174
tcp_data_queue net/ipv4/tcp_input.c:5661
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
rlock(clock-AF_INET);
lock(&stab->lock);
lock(clock-AF_INET);
lock(&stab->lock);
*** DEADLOCK ***
A tc, xdp, socket_filter or flow_dissector program has no reason to
update or delete a sockmap, and redirect does not go through here. Drop
them from may_update_sockmap() so the verifier rejects it. It also
closes the matching sockhash inversion.
Suggested-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Sechang Lim <rhkrqnwk98@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260630145410.3648099-2-rhkrqnwk98@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
||
|
|
9c9ee0324c
|
bpf: Reject MEM_ALLOC BTF accesses past object bounds
BTF struct walks relax the struct-size check for accesses through a trailing flexible array. That is valid for ordinary BTF type walking, but PTR_TO_BTF_ID | MEM_ALLOC values point to objects allocated with the static BTF type size. When walking a MEM_ALLOC object, reject the access before applying the flexible-array relaxation if the access range extends past the struct size. Apply the same policy to struct ID matching so kfunc and kptr type checks do not walk past the allocated object bounds either. Fixes: |
||
|
|
87bfe634b1 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf 7.2-rc2
Cross-merge BPF and other fixes after downstream PR. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> |
||
|
|
51512e22ef |
BPF fixes:
- Initialize task local storage before fork bails out to free the task (Jann Horn) - Fix insn_aux_data leak on verifier error path (KaFai Wan) - Reject BPF inode storage map creation when BPF LSM is uninitialized (Matt Bobrowski) - Mask pseudo pointer values in verifier logs when pointer leaks are not allowed (Nuoqi Gui) - Harden BPF JIT against spraying via IBPB flush (Pawan Gupta) - Reject a skb-modifying SK_SKB stream parser since the latter is only meant to measure the next message (Sechang Lim) - Fix bpf_refcount_acquire to reject refcounted allocation arguments with a non-zero fixed offset (Yiyang Chen) Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> -----BEGIN PGP SIGNATURE----- iIsEABYKADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCaka0NhUcZGFuaWVsQGlv Z2VhcmJveC5uZXQACgkQ2yufC7HISIMPywD/ePh+eOZjFwXy88kOdNa2qmKLuTQm nv6jPDOEafVDfbUA/R0qT9t+144K5Ig1NU58uR9vMIevqWRjLrnQtWU7KI0D =4aKP -----END PGP SIGNATURE----- Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Pull BPF fixes from Daniel Borkmann: - Initialize task local storage before fork bails out to free the task (Jann Horn) - Fix insn_aux_data leak on verifier error path (KaFai Wan) - Reject BPF inode storage map creation when BPF LSM is uninitialized (Matt Bobrowski) - Mask pseudo pointer values in verifier logs when pointer leaks are not allowed (Nuoqi Gui) - Harden BPF JIT against spraying via IBPB flush (Pawan Gupta) - Reject a skb-modifying SK_SKB stream parser since the latter is only meant to measure the next message (Sechang Lim) - Fix bpf_refcount_acquire to reject refcounted allocation arguments with a non-zero fixed offset (Yiyang Chen) * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Prefer dirty packs for eBPF allocations bpf: Prefer packs that won't trigger an IBPB flush on allocation bpf: Skip redundant IBPB in pack allocator bpf: Restrict JIT predictor flush to cBPF x86/bugs: Enable IBPB flush on BPF JIT allocation bpf: Support for hardening against JIT spraying bpf: Reject BPF_MAP_TYPE_INODE_STORAGE creation if BPF LSM is uninitialized bpf,fork: wipe ->bpf_storage before bailouts that access it bpf: Fix insn_aux_data leak on verifier err_free_env path selftests/bpf: Cover pseudo-BTF ksym log masking bpf: Mask pseudo pointer values in verifier logs selftests/bpf: Cover refcount acquire node offsets bpf: Reject offset refcount acquire arguments selftests/bpf: test rejection of a packet-modifying SK_SKB stream parser bpf, sockmap: reject a packet-modifying SK_SKB stream parser selftests/bpf: don't modify the skb in the strparser parser prog |
||
|
|
2ce3f548cf |
bpf,lsm: Drop bpf_prog_free from sleepable_lsm_hooks
__bpf_prog_put_rcu() is the call_rcu() callback for non-sleepable programs.
security_bpf_prog_free() called from there fires bpf_prog_free in softirq;
if a sleepable LSM prog is attached to that hook, might_fault() BUGs:
BUG: sleeping function called from invalid context
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 5038
preempt_count: 101, expected: 0
Call Trace:
<IRQ>
__bpf_prog_enter_sleepable+0x1cd/0x320 kernel/bpf/trampoline.c:1255
bpf_trampoline_6442549705+0x53/0xd7
security_bpf_prog_free+0xde/0x130 security/security.c:5465
__bpf_prog_put_rcu+0xab/0xd0 kernel/bpf/syscall.c:2365
rcu_do_batch kernel/rcu/tree.c:2617 [inline]
handle_softirqs+0x236/0x800 kernel/softirq.c:622
</IRQ>
The call_rcu/call_rcu_tasks_trace split reflects the freed program's
sleepability, not that of any attached observer.
security_bpf_prog_free() also frees prog->aux->security, which has to stay
after the grace period, so drop bpf_prog_free from sleepable_lsm_hooks
rather than move the call. Non-sleepable observers still run there.
Fixes:
|
||
|
|
475b59db3b |
bpf: Use BPF_CALL_IMM macro consistently in bpf_do_misc_fixups
In bpf_do_misc_fixups(), the conversion from a function address to a BPF immediate value is handled using the BPF_CALL_IMM macro inside the 'patch_map_ops_generic' label block. However, immediately following it in the 'patch_call_imm' label block, the immediate value is calculated manually by subtracting __bpf_call_base from fn->func. Inspired by KaFai Wan's review comments on fixing helper call offsets, use the BPF_CALL_IMM macro in 'patch_call_imm' as well to clean this up. This removes the redundant manual pointer arithmetic and ensures coding style consistency across adjacent label blocks within the same function. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20260701035107.8069-1-yangtiezhu@loongson.cn |
||
|
|
859055e076 |
bpf: Add tracing_multi link info support
Adding BPF_OBJ_GET_INFO_BY_FD support for tracing_multi links. We expose following tracing_multi link data: - attach_type of the program - number of ids - array of BTF ids - array of its related kernel addresses - array of cookies The change follows the kprobe_multi and uprobe_multi link-info convention of optional output arrays with an in/out count, On top of standard tracing link data we also expose addresses, because they are useful info for user (especially when the attachment was done via pattern). This data is hidden when kallsyms does not allow exposing kernel pointer values. Assisted-by: Codex:GPT-5 Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Leon Hwang <leon.hwang@linux.dev> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20260629212208.895962-2-jolsa@kernel.org |
||
|
|
b72e29e0f7 |
bpf: Prefer dirty packs for eBPF allocations
The pack allocator only flushes predictors when reusing a dirty pack for cBPF, eBPF allocations never trigger a flush. Currently, eBPF picks the first free pack, which could be a clean pack. As an optimization, leaving a clean pack for cBPF can avoid flushes. Prefer dirty packs for eBPF and keep clean packs free for cBPF. This mirrors the existing cBPF preference for clean packs: each program kind prefers the pack that avoids an extra flush, and falls back to the other kind only when no preferred pack has room. eBPF reuse of a dirty pack is harmless since eBPF being privileged does not flush. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> |
||
|
|
a9b1f19a6a |
bpf: Prefer packs that won't trigger an IBPB flush on allocation
Currently BPF pack allocator picks the chunks from the first available
pack. While this is okay, it naturally leads to more frequent flushes
when there are multiple packs in the system that weren't used since the
last flush.
As an optimization prefer allocating the new programs from packs that
are unused since last flush. When all packs are dirty, allocation forces
a flush and marks all packs clean.
Below are some future optimizations ideas:
1. Currently, the "dirty" tracking is only done at the pack-level.
Flush frequency can further be reduced with chunk-level tracking.
This requires a new bitmap per-pack to track the dirty state.
2. IBPB flush is done on all CPUs, even if only a single CPU ran the
BPF program. On a system with hundreds of CPUs this could be a
major bottleneck forcing hundreds of IPIs to deliver the flush.
The solution is to track the CPUs where a BPF program ran, and
issue IBPB only on those CPUs.
3. Avoid IBPB when flush is already done at other sources (e.g.
context switch).
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
||
|
|
a23c1c5396 |
bpf: Skip redundant IBPB in pack allocator
bpf_prog_pack_alloc() issues IBPB on all CPUs on every cBPF allocation, even when reusing chunks from an existing pack where no new memory was touched since the last IBPB. Since IBPB on all CPUs is heavy, Dave Hansen suggested to track allocation since last IBPB, and only issue IBPB at reuse for the chunks that have not seen an IBPB since they were last freed. Track per-pack whether an IBPB is needed via arch_flush_needed. Set it when allocating a chunk, reset on IBPB flush. On reuse, conditionally issue the flush. Since IBPB invalidates all BTB entries, clear the flag on all packs after flushing. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> |
||
|
|
0bb99f2cfa |
bpf: Restrict JIT predictor flush to cBPF
Currently predictor flush on memory reuse is done for all BPF JIT allocations, but only cBPF programs can be loaded by an unprivileged user. eBPF is privileged by default, and flushing predictors for all CPUs on every eBPF reuse penalizes the common case for no security benefit. eBPF allocations can be frequent on busy systems, only flush predictors for cBPF programs. Trampoline and dispatcher allocations also skip the flush as they are eBPF-only. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> |
||
|
|
96cce16e26 |
bpf: Support for hardening against JIT spraying
The BPF JIT allocator packs many small programs into larger executable allocations and reuses space within those allocations as programs are loaded and freed. When fresh code is written into space that a previous program occupied, an indirect jump into the new program can reuse a branch prediction left behind by the old one. Flush the indirect branch predictors before reusing JIT memory so that indirect jumps into a newly written program don't reuse predictions from an old program that occupied the same space. Introduce bpf_arch_pred_flush_enabled static key and bpf_arch_pred_flush static call for flushing the branch predictors on JIT memory reuse. Architectures that need a flush, can update it to a predictor flush function. By default, its a NOP and does not emit any CALL. Allocations larger than a pack are not covered by this flush. That is safe because cBPF programs (the unprivileged attack surface) are bounded well below a pack size. Issue a warning if this assumption is ever violated while the flush is active. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> |
||
|
|
665159e246 |
Probes fixes for v7.2-rc1:
- fprobe: Fix stability and spelling typos
. Fix NULL pointer dereference in fprobe_fgraph_entry(): Prevent general
protection faults by checking shadow-stack reservation bounds. Skip
mid-flight registered fprobes that were not counted during sizing.
- eprobe: Fix string pointer extraction
. Correct the casting of string pointers read from the ringbuffer to
prevent truncation of base event pointer variables when dereferencing
FILTER_PTR_STRING fields.
- tracing/probes: Clean up argument parsing and BTF helper logic
. Make the $ prefix mandatory for comm access: Require the $ prefix for
special fetcharg variables like $comm and $COMM, preventing naming
conflicts with regular BTF-based event fields.
. Fix double addition of offset for @+FOFFSET: Clear the temporary offset
variable after setting the FETCH_OP_FOFFS instruction to avoid applying
the offset multiple times.
. Remove WARN_ON_ONCE from parse_btf_arg: Prevent triggering a kernel warning
via user-space input when creating a kprobe event on a raw address.
. Fix typo in a log message: Correct a spelling error ("$-valiable") in
trace probe log messages.
- samples/trace_events: Improve error checking
. Validate the thread pointer returned from kthread_run() in the trace
events sample code to properly handle thread creation failures.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmpD3BEbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8beGkIAMbMZ7zoCIlKEfZaRIHS
ms2BTUfh5mkyoIJ+dWXel9UmsvL2kj4FzKWt+gYKsYuxqu3o62BGIkaNffXJEKnc
qRvgVxsxOeJqXjmnSDjVhukBDGb8X1SaRd4DZMuEO77d2nYztYO61ejkF94S6WaQ
VE46pFu0FWGZvFGyyfrCEYFIkFF+4scsDB4ncHLR8u5tNqzg7NaUdvK+tc88/Exk
k7+qqo8aCwMjd8wkfsyCH6DvQmmN5sKcCEvOL8zzE6D4xfX9kRd0//FBZPDmGUC4
lQ2jNhMYhdLdOP+I7dIi+FBaY0Lye8mwHrnrqI2DSvYO4cb4LQvn2hexKLbN2dZE
dt8=
=3Y70
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
"fprobe fixes and spelling typos:
- Fix NULL pointer dereference in fprobe_fgraph_entry(). Prevent
general protection faults by checking shadow-stack reservation
bounds. Skip mid-flight registered fprobes that were not counted
during sizing.
eprobe: fix string pointer extraction
- Correct the casting of string pointers read from the ringbuffer to
prevent truncation of base event pointer variables when
dereferencing FILTER_PTR_STRING fields.
tracing/probes: clean up argument parsing and BTF helper logic
- Make the $ prefix mandatory for comm access: Require the $ prefix
for special fetcharg variables like $comm and $COMM, preventing
naming conflicts with regular BTF-based event fields.
- Fix double addition of offset for @+FOFFSET: Clear the temporary
offset variable after setting the FETCH_OP_FOFFS instruction to
avoid applying the offset multiple times.
- Remove WARN_ON_ONCE from parse_btf_arg: Prevent triggering a kernel
warning via user-space input when creating a kprobe event on a raw
address.
- Fix typo in a log message: Correct a spelling error ("$-valiable")
in trace probe log messages.
samples/trace_events: improve error checking
- Validate the thread pointer returned from kthread_run() in the
trace events sample code to properly handle thread creation
failures"
* tag 'probes-fixes-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Make the $ prefix mandatory for comm access
tracing/fprobe: Fix NULL pointer dereference in fprobe_fgraph_entry()
tracing/probes: Fix double addition of offset for @+FOFFSET
tracing: eprobe: read the complete FILTER_PTR_STRING pointer
tracing/events: Fix to check the simple_tsk_fn creation
tracing/probes: Remove WARN_ON_ONCE from parse_btf_arg
tracing: probes: fix typo in a log message
|
||
|
|
a369299c3f |
tracing/probes: Make the $ prefix mandatory for comm access
Since $comm or $COMM are not event field but special fetcharg
variables to access current->comm, It should not be accessed
without '$' prefix even with typecast.
Link: https://lore.kernel.org/all/178231209724.732967.12049805699091810641.stgit@devnote2/
Fixes:
|
||
|
|
367c49d6e2 |
tracing/fprobe: Fix NULL pointer dereference in fprobe_fgraph_entry()
fprobe_fgraph_entry() sizes a shadow-stack reservation in one walk of
the per-ip fprobe list and fills it in a second walk, both under
rcu_read_lock() only. A fprobe registered on an already-live ip can
become visible between the two walks, so the fill walk processes an
exit_handler the sizing walk did not count and used runs past
reserved_words. If the sizing walk counted nothing, fgraph_data is NULL
and the first write_fprobe_header() faults:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:fprobe_fgraph_entry+0xa38/0xf10 kernel/trace/fprobe.c:167
Call Trace:
<TASK>
function_graph_enter_regs+0x44c/0xa10 kernel/trace/fgraph.c:677
ftrace_graph_func+0xc5/0x140 arch/x86/kernel/ftrace.c:671
__kernel_text_address+0x9/0x40 kernel/extable.c:78
arch_stack_walk+0x117/0x170 arch/x86/kernel/stacktrace.c:26
kmem_cache_free+0x188/0x580 mm/slub.c:6378
tcp_data_queue+0x18d/0x6550 net/ipv4/tcp_input.c:5590
[...]
</TASK>
The list cannot be frozen across the two walks, so skip a node that does
not fit the reservation and count it as missed.
Link: https://lore.kernel.org/all/20260619184425.3824774-1-rhkrqnwk98@gmail.com/
Fixes:
|
||
|
|
9a667b7750 |
tracing/probes: Fix double addition of offset for @+FOFFSET
Since commit |
||
|
|
206b25c090 |
tracing: eprobe: read the complete FILTER_PTR_STRING pointer
For a char * element in an event, the FILTER_PTR_STRING filter type is
used. When the event occurs, a pointer is stored in the ringbuffer.
If an eprobe references such a char * element of a "base event", the
stored pointer is truncated when it's read from the ringbuffer.
$ cd /sys/kernel/tracing
$ echo 'e rcu.rcu_utilization $s:x64 $s:string' > dynamic_events
$ echo 1 > tracing_on
$ echo 1 > events/eprobes/enable
$ sleep 1
$ echo 0 > events/eprobes/enable
$ cat trace
<idle>-0 ...: (rcu.rcu_utilization) arg1=0x4f arg2=(fault)
<idle>-0 ...: (rcu.rcu_utilization) arg1=0x2 arg2=(fault)
The problem is in get_event_field
val = (unsigned long)(*(char *)addr);
addr points to the position in the ringbuffer where the pointer was
stored. The assignment reads only the lowest byte of the pointer.
Fix the cast to read the whole pointer. The output of the test above
is now
<idle>-0 ... arg1=0xffffffff81c7d3f3 arg2="Start scheduler-tick"
<idle>-0 ... arg1=0xffffffff81c57340 arg2="End scheduler-tick"
Link: https://lore.kernel.org/all/20260620145339.3234726-1-martin@kaiser.cx/
Fixes:
|
||
|
|
251a8fe1b9 |
tracing/probes: Remove WARN_ON_ONCE from parse_btf_arg
Sashiko found that user can cause this WARN_ON_ONCE() easily
with adding a kprobe event based on a raw address with BTF
parameter.
Since this is not an unexpected condition, remove the
WARN_ON_ONCE().
Link: https://lore.kernel.org/all/178177265367.2059927.13789953014706792126.stgit@mhiramat.tok.corp.google.com/
Link: https://sashiko.dev/#/patchset/178165816303.269421.7302603996990753309.stgit%40devnote2
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes:
|
||
|
|
a6f0643e4f |
bpf: Reject BPF_MAP_TYPE_INODE_STORAGE creation if BPF LSM is uninitialized
When CONFIG_BPF_LSM=y is set, BPF inode storage maps
(BPF_MAP_TYPE_INODE_STORAGE) are compiled into the kernel. However,
if the BPF LSM is not explicitly enabled at boot time (e.g. omitted
from the "lsm=" boot parameter), lsm_prepare() is never executed for
the BPF LSM.
Consequently, the BPF inode security blob offset
(bpf_lsm_blob_sizes.lbs_inode) is never initialized and remains at
its default compiled size of 8 bytes instead of being updated to a
valid offset past the reserved struct rcu_head (typically 16 bytes
or more).
When a privileged user creates and updates a BPF_MAP_TYPE_INODE_STORAGE
map, bpf_inode() evaluates inode->i_security + 8. This erroneously
aliases the struct rcu_head.func callback pointer at the beginning
of the inode->i_security blob. During subsequent map element cleanup
or inode destruction, writing NULL to owner_storage clears the queued
RCU callback pointer. When rcu_do_batch() later executes the queued
callback, it attempts an instruction fetch at address 0x0, triggering
an immediate kernel panic.
Fix this by introducing a global bpf_lsm_initialized boolean flag
marked with __ro_after_init. Set this flag to true inside bpf_lsm_init()
when the LSM framework successfully registers the BPF LSM. Gate map
allocation in inode_storage_map_alloc() on this flag, returning
-EOPNOTSUPP if the BPF LSM is in turn uninitialized.
This fail-fast approach prevents userspace from allocating inode
storage maps when the supporting BPF LSM infrastructure is absent,
avoiding zombie map states.
Fixes:
|
||
|
|
9b51a6155d |
bpf,fork: wipe ->bpf_storage before bailouts that access it
Currently, copy_process() can bail out to free_task() before p->bpf_storage
has been initialized, with this call graph (shown here for the
!CONFIG_MEMCG case):
copy_process
dup_task_struct
arch_dup_task_struct
[copies the entire task_struct, including ->bpf_storage member]
[RLIMIT_NPROC check fails]
delayed_free_task
free_task
bpf_task_storage_free
rcu_dereference(task->bpf_storage)
bpf_local_storage_destroy
In this case, the nascent task's ->bpf_storage member that
bpf_local_storage_destroy() operates on is a plain copy of the parent's
->bpf_storage pointer, not a real initialized pointer.
This leads to badness (kernel hangs, UAF).
This is reachable as long as the process calling fork() has been inserted
into a task storage map.
Cc: stable@kernel.org
Fixes:
|
||
|
|
e27d4bbe0d |
Power management fixes for 7.2-rc1
- Remove a misguided warning along with an inaccurate comment next to
it from the cpuidle core (Rafael Wysocki)
- Clear need_freq_update as appropriate in the .adjust_perf()
path of the schedutil cpufreq governor to avoid calling
cpufreq_driver_adjust_perf() unnecessarily on every scheduler
utilization update (Zhongqiu Han)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmo+ujsSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1o5UH/0PUjz0I+HrrPi6O6Nt2vaA/o+fI8DRA
d+M2KbZqh1e/Jk8wMB9IwErFzolY6rrJ4HeBkzBo7VNIofgvljH7EwrrUhYhv1c1
xWViKUS6JUpAOwA+44tGKhiDU5PrNHyVDXqjJ5id6pfBiVMxtRcCCd1xBDQRNXg2
r3hRnUz9F3vP93AB0lujsSQeMj2g6XmTX+AyBmDcrYwrO/vZOao1OWNOnxfbt4Yd
TPokkyPCBuLAQYM7eDF1jMsbRqDIo4/zHbVMmVdUYzOd944S1Ruira89V5A7Txzg
Ih7DCct2UDwAMKubMYEVlCdSkXZl7IRXep+qDeOkLo3xhs0UORgEXwg=
=V/er
-----END PGP SIGNATURE-----
Merge tag 'pm-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the schedutil cpufreq governor and drop a bogus warning
from the cpuidle core:
- Remove a misguided warning along with an inaccurate comment
next to it from the cpuidle core (Rafael Wysocki)
- Clear need_freq_update as appropriate in the .adjust_perf()
path of the schedutil cpufreq governor to avoid calling
cpufreq_driver_adjust_perf() unnecessarily on every scheduler
utilization update (Zhongqiu Han)"
* tag 'pm-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: Allow exit latency to exceed target residency
cpufreq: schedutil: Fix uncleared need_freq_update on the .adjust_perf() path
|
||
|
|
26490a375c |
bpf: Fix insn_aux_data leak on verifier err_free_env path
When bpf_check() allocates env->insn_aux_data successfully but later
fails to allocate env->succ, it jumps directly to err_free_env.
The existing vfree(env->insn_aux_data) sits before the err_free_env
label, so that direct jump bypasses it and leaks insn_aux_data.
Move vfree(env->insn_aux_data) into err_free_env so all early and late
exit paths release it consistently.
Fixes:
|
||
|
|
72a85e9464 |
bpf: Mask pseudo pointer values in verifier logs
print_bpf_insn() masks ldimm64 immediates for pointer-bearing pseudo sources when pointer leaks are not allowed, but the mask only covers BPF_PSEUDO_MAP_FD and BPF_PSEUDO_MAP_VALUE. BPF_PSEUDO_MAP_IDX, BPF_PSEUDO_MAP_IDX_VALUE, and BPF_PSEUDO_BTF_ID can also be resolved to kernel pointer values before the verifier log prints the instruction. Include them in the existing pointer classification so the log prints 0x0 instead of the rewritten address. Fixes: |
||
|
|
69fdbe63e1 |
bpf: Preserve scalar zero spills for stack reads
Stack reads can read back bytes that belong to a previously spilled scalar constant zero. Today mark_reg_stack_read() only treats STACK_ZERO bytes as known zero bytes, so the destination register can become unknown even though every byte in the read range is known to be zero. This can lead to rejecting otherwise valid programs once the loaded byte is used as a pointer offset. The original reproducer uses a variable-offset stack byte read emitted by clang 22.1.6 at -O2/-O3 from a small helper-based BPF C program. Fixed offset reads have a related mixed case as well: pure scalar-zero spill reads are already handled, but a fixed read spanning both STACK_ZERO and scalar const-zero STACK_SPILL bytes still falls back to unknown. Teach mark_reg_stack_read() to also consider STACK_SPILL bytes backed by a spilled scalar constant zero as zero bytes, and use that path for both variable-offset stack reads and fixed-offset mixed reads. Keep the existing pure register-fill behavior unchanged. When a zero result depends on such a spill, mark the contributing stack slots precise before accepting the const-zero result so pruning cannot reuse a zero-spill state for a later non-zero spill state. No deployed-program regression is currently known, so target bpf-next. Assisted-by: opencode:gpt-5.5 Signed-off-by: Woojin Ji <random6.xyz@gmail.com> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20260625-bpf-stack-var-off-zero-v1-v3-1-a068210a761b@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
|
931a577fc7 |
bpf: Reject offset refcount acquire arguments
bpf_refcount_acquire() increments the refcount at the caller-supplied
pointer plus the refcount field offset, then returns the caller-supplied
pointer unchanged.
The verifier records the return value as a base pointer to the refcounted
object.
bpf_list_pop_front() and bpf_rbtree_remove() can return embedded
graph-node pointers as PTR_TO_BTF_ID | MEM_ALLOC with a fixed offset equal
to the node field offset. Passing such a pointer directly to
bpf_refcount_acquire() currently passes the refcounted-kptr type check.
That makes the runtime operation start from base + node_off while the
verifier models the returned pointer as the object base.
Require refcount-acquire arguments to have zero fixed offset by carrying
the requirement through check_func_arg_reg_off() to __check_ptr_off_reg().
Programs can still acquire a refcount from a graph-node-derived pointer
after normalizing it with container_of().
Fixes:
|
||
|
|
4edcdefd40 |
bpf-fixes
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmo9if4ACgkQ6rmadz2v bTqujQ/+IUqsYYfnOzxHoaWOy5aLFDjjFBwbbBqU3qBrgkAVNa1xLtuM2Dt/zro9 eNBHa1OitQG4ZZ3ZjFqw7W+ErsUlUagYXa3ldmlpNs1euDqAtLgg6lW8sYj5zIfn KV9coUxArcos8hdX3YQqV3ZWFxFvTuEduniW502swYGTjUXLjBrbPhHhyXVtf3i4 v6MMYkraWSo3ez8Wh+TiyfkOFVNP5JoDRP66vmN5k90B4VuZgVHIQsXp/kFPTmxL XpbGRF4/SevWgE5TEY7tBjwWV5aOcsPL55H6lStMt2ViOdQyWCGF6CY8UISXMC3L WlWu8e4ICpg9YWOXb98pfp8f2mZW7J8ppa3fed0IRcnHh40ywG69ubNJSddPLfFf LtzR3wCQd4DIg0CqWcGnAuOTgioLh3GEwQJ1JzjFmKHw7wlsD4PzoJ6jFdwop6zw 2/3tKv/9jhcM9yeLWW7qFiySMxsENbkhkje/hqWd24PL6HKj2d5mXzoX8Msq1ccE VQ3HGjXHLawTSQ4YDUp4NoZh7E7KkKZkH8UHS8YgrlQsshdTpuiVpmtX08cJHNWP 0SpSVMYxvZtOBbrbCk7qyu/H6ubUod6gscdB2L6t06QjEYl4GyurpP1Uygs9hGy8 9vlUSBRxSa7u7VAAEolgxkiutWfD4CnulYX02f4H1h+jfBKEMQA= =wnIr -----END PGP SIGNATURE----- Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Pull bpf fixes from Alexei Starovoitov: - Fix effective prog array index with BPF_F_PREORDER (Amery Hung) - Zero-initialize the fib lookup flow struct (Avinash Duduskar) - Disable xfrm_decode_session hook attachment (Bradley Morgan) - Allow type tag BTF records to succeed other modifier records (Emil Tsalapatis) - Fix build_id caching in stack_map_get_build_id_offset() (Ihor Solodrai) - Add missing access_ok call to copy_user_syms (Jiri Olsa) - Fix stack slot index in nospec checks (Nuoqi Gui) - Preserve pointer spill metadata during half-slot cleanup (Nuoqi Gui) - Fix partial copy of non-linear test_run output (Sun Jian) - Fix BPF_PROG_ASSOC_STRUCT_OPS last field check (Thiébaud Weksteen) - Reset register bounds before narrowing retval range (Tristan Madani) - Fix vmlinux BTF leak in bpftool cgroup commands (Yichong Chen) - Guard error writes in conntrack kfuncs (Yiyang Chen) * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Disable xfrm_decode_session hook attachment selftests/bpf: Add test for stale bounds on LSM retval context load bpf: Reset register bounds before narrowing retval range in check_mem_access() selftests/bpf: Cover small conntrack opts error writes bpf: Guard conntrack opts error writes selftests/bpf: Cover half-slot cleanup of pointer spills bpf: Preserve pointer spill metadata during half-slot cleanup selftests/bpf: Test cgroup link replace with BPF_F_PREORDER bpf: Fix effective prog array index with BPF_F_PREORDER bpf: Fix BPF_PROG_ASSOC_STRUCT_OPS last field check bpf: zero-initialize the fib lookup flow struct bpftool: Fix vmlinux BTF leak in cgroup commands bpf: Add missing access_ok call to copy_user_syms bpf: Allow type tag BTF records to succeed other modifier records bpf: Emit verbose message when prog-specific btf_struct_access rejects a write bpf: Fix build_id caching in stack_map_get_build_id_offset() bpf: Fix partial copy of non-linear test_run output selftests/bpf: Cover stack nospec slot indexing bpf: Fix stack slot index in nospec checks |
||
|
|
a142da0b2d |
block-7.2-20260625
-----BEGIN PGP SIGNATURE-----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=ywFi
-----END PGP SIGNATURE-----
Merge tag 'block-7.2-20260625' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- blk-cgroup locking rework and fixes:
- fix a use-after-free in __blkcg_rstat_flush()
- defer freeing policy data until after an RCU grace period
- defer the blkcg css_put until the blkg is unlinked from
the queue
- unwind the queue_lock nesting under RCU / blkcg->lock
across the lookup, create, associate and destroy paths
- NVMe fixes via Keith:
- Fix a crash and memory leak during invalid cdev teardown,
and related cdev cleanups (Maurizio, John)
- nvmet fixes: handle TCP_CLOSING in the tcp state_change
handler, reject short AUTH_RECEIVE buffers, handle inline
data with a nonzero offset in rdma, fix an sq refcount leak,
and allocate ana_state with the port (Maurizio, Michael,
Bryam, Wentao, Rosen)
- nvme-fc fix to not cancel requests on an IO target before it
is initialized (Mohamed)
- nvme-apple fix to prevent shared tags across queues on Apple
A11 (Nick)
- Various smaller fixes and cleanups (John)
- MD fixes via Yu Kuai:
- raid1/raid10 fixes for writes_pending and barrier reference
leaks on write and discard failures, plus REQ_NOWAIT handling
fixes (Abd-Alrhman)
- raid5 discard accounting and validation, and a batch of fixes
for stripe batch races (Yu Kuai, Chen)
- Protect raid1 head_position during read balancing (Chen)
- block bio-integrity fixes: correct an error injection static key
decrement, fix GFP flag confusion in bio_integrity_alloc_buf(), and
handle REQ_OP_ZONE_APPEND in __bio_integrity_action() (Christoph)
- Fixes for bio_iov_iter_bounce_write(): revert the iov_iter after a
short copy, and respect the iov_iter nofault flag (Qu)
- Invalidate the cached plug timestamp after a task switch, and clear
PF_BLOCK_TS in copy_process() (Usama)
- Fix the IORING_URING_CMD_REISSUE flags check in blkdev_uring_cmd()
(Yitang)
- Remove a redundant plug in __submit_bio() (Wen)
- Don't warn when reclassifying a busy socket lock in nbd (Deepanshu)
* tag 'block-7.2-20260625' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (45 commits)
block: handle REQ_OP_ZONE_APPEND in __bio_integrity_action
block: fix GFP_ flags confusion in bio_integrity_alloc_buf
block, bfq: don't grab queue_lock to initialize bfq
mm/page_io: don't nest queue_lock under rcu in bio_associate_blkg_from_page()
blk-cgroup: don't nest queue_lock under blkcg->lock in blkcg_destroy_blkgs()
blk-cgroup: don't nest queue_lock under rcu in bio_associate_blkg()
blk-cgroup: don't nest queue_lock under rcu in blkg_lookup_create()
blk-cgroup: don't nest queue_lock under rcu in blkcg_print_blkgs()
blk-cgroup: delay freeing policy data after rcu grace period
blk-cgroup: protect iterating blkgs with blkcg->lock in blkcg_print_stat()
md/raid5: avoid R5_Overlap races while breaking stripe batches
md/raid5: use stripe state snapshot in break_stripe_batch_list()
blk-cgroup: defer blkcg css_put until blkg is unlinked from queue
blk-cgroup: fix UAF in __blkcg_rstat_flush()
block, bfq: protect async queue reset with blkcg locks
nbd: don't warn when reclassifying a busy socket lock
block: fix incorrect error injection static key decrement
md/raid5: let stripe batch bm_seq comparison wrap-safe
md/raid1: protect head_position for read balance
md/raid1: free r1_bio when REQ_NOWAIT is set and read would block on retry
...
|
||
|
|
72c8646956 |
tracing: probes: fix typo in a log message
Fix a typo ("Invalid $-variable") in a log message.
Link: https://lore.kernel.org/all/20260507081041.885781-4-martin@kaiser.cx/
Fixes:
|
||
|
|
26ae421f7f |
pci-v7.2-changes
-----BEGIN PGP SIGNATURE-----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=h+xD
-----END PGP SIGNATURE-----
Merge tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*) that worked
around a WiFi device defect; use a quirk or boot-time
"pci=pcie_bus_tune_*" kernel parameter instead (Bjorn Helgaas)
- Always lift 2.5GT/s restriction in PCIe failed link retraining to
avoid clamping a link to 2.5GT/s after hot-plug changes the device
(Maciej W. Rozycki)
- Request bus reassignment when not probe-only to fix an enumeration
regression on Marvell CN106XX and possibly other DT-based systems
(Ratheesh Kannoth)
- Fix procfs race between pci_proc_init() and pci_bus_add_device()
that resulted in 'proc_dir_entry ... already registered' warnings
and pointer corruption (Krzysztof Wilczyński)
- Fix sysfs race that causes 'duplicate filename' warnings and boot
panics by converting PCI resource files to static attributes
(Krzysztof Wilczyński)
- Expose sysfs 'resourceN_resize' attributes only on platforms with
PCI mmap (Krzysztof Wilczyński)
- Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize'
attributes (Krzysztof Wilczyński)
- Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource
mmap path to match the generic path (Krzysztof Wilczyński)
- Use kstrtobool() to parse the 'rom' attribute input to avoid the
unexpected behavior of enabling the ROM when writing '0' with no
trailing newline (Krzysztof Wilczyński)
Resource management:
- Improve resource claim logging for debuggability (Ilpo Järvinen)
- Clean up several uses of const parameters (Ilpo Järvinen)
- Check option ROM header signatures and lengths before accessing to
avoid page faults and alignment faults (Guixin Liu)
ASPM:
- Don't reconfigure ASPM when entering low-power D-state; only do it
when returning back to D0 (Carlos Bilbao)
Power management:
- During suspend, set power state to 'unknown' for all devices, not
just those with drivers (Lukas Wunner)
- Skip restoring Resizable BARs and VF Resizable BARs if device
doesn't respond to config reads, to avoid invalid array accesses
(Marco Nenciarini)
- Add pci_suspend_retains_context() so drivers can tell whether
devices retain internal state across suspend/resume, since some
platforms reset devices on suspend; use this in nvme to avoid
issues on Qcom RCs (Manivannan Sadhasivam)
Power control:
- Only to power on/off devices that actually support power control to
avoid poking at incompatible devices mentioned in DT (Manivannan
Sadhasivam)
Virtualization and resets:
- Log device readiness timeouts as errors, not warnings, because the
device is likely unusable in this case (Bjorn Helgaas)
- Wait for device readiness after soft reset (D3hot ->
D0uninitialized transition), when the device may respond with
Request Retry Status (RRS) if it needs more time to initialize
(Bjorn Helgaas)
- Drop unnecessary retries when restoring BARs because resets should
now already include all required delays (Lukas Wunner)
- Avoid FLR for MediaTek MT7925 WiFi, where FLR fails after a VM
terminates uncleanly (Jose Ignacio Tornos Martinez)
- Avoid SBR for Qualcomm WCN6855/WCN7850 WiFi, SDX62/SDX65 modems,
which seem not to support it correctly (Jose Ignacio Tornos
Martinez)
Peer-to-peer DMA:
- Prevent P2PDMA as well as CPU access to non-mappable BARs, e.g.,
s390 ISM BARs (Matt Evans)
- Add Intel QAT, DSA, IAA devices to whitelist (Lukas Wunner)
Endpoint framework:
- Add endpoint controller APIs for use by function drivers to
discover auxiliary blocks like DMA engines (Koichiro Den)
- Remember DesignWare eDMA engine base/size and expose them via the
EPC aux-resource API (Koichiro Den)
- Add endpoint embedded doorbell fallback, used if MSI allocation
fails (Koichiro Den)
- Validate BAR index and remove dead BAR read in endpoint doorbell
test (Carlos Bilbao)
- Unwind MSI/MSI-X vectors if NTB initialization fails part-way
through (Koichiro Den)
- Cache sleepable pci_irq_vector() value at ISR setup to avoid
calling it from hardirq context (Koichiro Den)
- Call sleepable pci_epc_raise_irq() from a work item instead of
atomic context, e.g., when setting bits in NTB peer doorbells in
the ntb_peer_db_set() path (Koichiro Den)
- Report 0-based vNTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Prevent configfs writes to vNTB db_count and other values that are
already in use after EPC attach (Koichiro Den)
- Account for vNTB db_valid reserved slots (link event 0 and
historically skipped slot 1) so they don't appear as valid
doorbells (Koichiro Den)
- Implement vNTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors and avoid thundering herds (Koichiro Den)
- Report 0-based NTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Fix doorbell bitmask and IRQ vector handling to clear only
specified bits, use the correct vector for non-contiguous Linux IRQ
numbers, and validate incoming vectors (Koichiro Den)
- Implement NTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors (Koichiro Den)
Native PCIe controller infrastructure:
- Add pci_host_common_link_train_delay() for the mandatory delay
after > 5GT/s Link training completes and use it for cadence HPA,
j721e, LGA; dwc; aardvark, mediatek-gen3, rzg3s (Hans Zhang)
- Protect root bus removal with rescan lock in altera, brcmstb,
cadence, dwc, iproc, mediatek, plda, rockchip to prevent
use-after-free or crashes when racing with sysfs rescan or hotplug
(Hans Zhang)
- Add pci_host_common_parse_ports() for use by any native driver to
parse Root Port properties (per-Link features like width, speed,
PHY, power and reset control, etc should be described in Root Port
stanzas, not the host bridge; currently only reset GPIOs
implemented) (Sherry Sun)
New native PCIe controller drivers:
- Add DT binding and driver for UltraRISC DP1000 PCIe controller
(Xincheng Zhang, Jia Wang)
Altera PCIe controller driver:
- Do not dispose of the parent IRQ mapping, which belongs to the
parent interrupt controller (Mahesh Vaidya)
- Fix chained IRQ handler ordering issue and resource leaks on probe
failure (Mahesh Vaidya)
AMD MDB PCIe controller driver:
- Assert PERST# on shutdown so any connected Endpoints are held in
reset during shutdown (Sai Krishna Musham)
Amlogic Meson PCIe controller driver:
- Propagate devm_add_action_or_reset() failure to fix probe error
path (Shuvam Pandey)
- Add .remove() callback to deinitialize the host bridge and power
off the PHY (Shuvam Pandey)
Broadcom iProc PCIe controller driver:
- Restore .map_irq() assignment; its removal broke INTx on the iproc
platform bus driver (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- No change, but products using certain WiFi devices may be affected
by removal of CONFIG_PCIE_BUS_* (see above)
Freescale i.MX6 PCIe controller driver:
- Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset
functions (Richard Zhu)
- Assert PERST# before enabling regulators to ensure that even if
power is enabled, endpoint stays inactive until REFCLK is stable
(Sherry Sun)
- Parse reset properties in Root Port nodes (falling back to host
bridge) to help support Key E connectors and the pwrctrl framework
(Sherry Sun)
- Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu)
- Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard
Zhu)
- Integrate new pwrctrl API for DTs with Root Port-level power
supplies (Sherry Sun)
Intel Gateway PCIe controller driver:
- Enable clock before PHY init for correct ordering (Florian Eckert)
- Add .start_link() callback so the driver works again (Florian
Eckert)
- Stop overwriting the ATU base address discovered by
dw_pcie_get_resources() (Florian Eckert)
- Add DT 'atu' region since this is hardware-specific, and fall back
to driver default if lacking (Florian Eckert)
Loongson PCIe controller driver:
- Ignore downstream devices only on internal bridges to avoid
Loongson hardware issue (Rong Zhang)
- Quirk old Loongson-3C6000 bridges that advertise incorrect
supported link speeds (Ziyao Li)
Marvell MVEBU PCIe controller driver:
- Use fixed-width interrupt masks to avoid truncation in 64-bit
builds (Rosen Penev)
MediaTek PCIe controller driver:
- Use FIELD_PREP() to fix incorrect operator precedence in
PCIE_FTS_NUM_L0 (Li RongQing)
- Fix IRQ domain leak when port fails to enable (Manivannan
Sadhasivam)
- Use actual physical address for MSI message address instead of
virt_to_phys() (Manivannan Sadhasivam)
- Add EcoNet EN7528 to DT binding (Caleb James DeLisle)
MediaTek PCIe Gen3 controller driver:
- Deassert PCIE_PHY_RSTB so REFCLK is stable for at least 100ms
(PCIE_T_PVPERL_MS) before deasserting PERST# (Jian Yang)
- Add .shutdown() to assert PERST# before powering down device (Jian
Yang)
- Do full device power down on removal, including asserting PERST#,
when removing driver (Chen-Yu Tsai)
- Fix a 'failed to create pwrctrl devices' error message that was
inadvertently skipped (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Program the DesignWare PORT_AFR L1 entrance latency based on the
'aspm-l1-entry-delay-ns' DT property (Manikanta Maddireddy)
Qualcomm PCIe controller driver:
- Add Eliza SoC compatible in DT binding (Krishna Chaitanya Chundru)
- Set max OPP during resume so DBI register accesses don't fail with
NoC errors (Qiang Yu)
- Add pci_host_common_d3cold_possible() to determine whether
downstream devices are already in D3hot and wakeup-enabled devices
are capable of generating PME from D3cold (Krishna Chaitanya
Chundru)
- Add .get_ltssm() callback to get the LTSSM status without DBI,
since DBI may be inaccessible after PME_Turn_Off (Krishna Chaitanya
Chundru)
- Power down PHY via PARF_PHY_CTRL before disabling rails/clocks to
avoid power leakage (Krishna Chaitanya Chundru)
- Decide whether suspend should put the link in L2 and power down
using pci_host_common_d3cold_possible() instead of checking whether
ASPM L1 is enabled (Krishna Chaitanya Chundru)
- Add qcom D3cold support to tear down interconnect bandwidth and OPP
votes (Krishna Chaitanya Chundru)
- Handle unsupported mixed PERST#/PHY DT configurations, e.g., PHY in
RP node while PERST# is in the RC node, but warn about the DT issue
(Qiang Yu)
- Program T_POWER_ON based on DT 't-power-on-us' property in case
hardware advertises incorrect values (Krishna Chaitanya Chundru)
- Disable ASPM L0s for SA8775P (Shawn Guo)
- Initialize DWC MSI lock for firmware-managed ECAM hosts, which
don't use the dw_pcie_host_init() path that initializes the lock
(Yadu M G)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/V2N DT support (Lad Prabhakar)
SOPHGO PCIe controller driver:
- Add 'dma-coherent' DT property for sg2042-pcie driver (Han Gao)
Synopsys DesignWare PCIe controller driver:
- Apply ECRC TLP Digest workaround for all DesignWare cores prior to
5.10a, not just 4.90a and 5.00a (Manikanta Maddireddy)
- Use common struct dw_pcie 'mode' rather than duplicating it in
artpec6, dra7xx, dwc-pcie, and keembay driver structs (Hans Zhang)
- Use DEFINE_SHOW_ATTRIBUTE for ltssm_status debugfs to reduce
boilerplate and fix a seq_file memory leak by including a
.release() callback (Hans Zhang)
- Fix a signedness bug in fault injection test code (Dan Carpenter)
- Avoid NULL pointer dereference when tearing down debugfs for
controller that lacks RAS DES capability (Shuvam Pandey)
MicroSemi Switchtec management driver:
- Add Gen6 Device IDs (Ben Reed)
Miscellaneous:
- Remove unused gpio.h include from amd-mdb, designware-plat, fu740,
visconti drivers (Andy Shevchenko)
- Fix typos in documentation (josh ziegler)
- Use FIELD_MODIFY() instead of open-coding it (Hans Zhang)"
* tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (168 commits)
PCI/sysfs: Use kstrtobool() to parse the ROM attribute input
PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap
PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init()
PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
PCI/sysfs: Add __weak pci_legacy_has_sparse() helper
alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range()
PCI: Add macros for legacy I/O and memory address space sizes
PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files()
alpha/PCI: Convert resource files to static attributes
alpha/PCI: Add static PCI resource attribute macros
alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits()
alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs
alpha/PCI: Use PCI resource accessor macros
alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer
alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope
PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files()
PCI/sysfs: Warn about BAR resize failure in __resource_resize_store()
PCI/sysfs: Convert PCI resource files to static attributes
PCI/proc: Fix race between pci_proc_init() and pci_bus_add_device()
...
|
||
|
|
541643982b |
Miscellaneous timer fixes:
- Fix timekeeping locking order bug in the timekeeping init code
(Mikhail Gavrilov)
- Fix u64 multiplication bug in the posix-cpu-timers code
on 32-bit kernels (Zhan Xusheng)
- Fix macro name in comment block (Ethan Nelson-Moore)
- Fix off-by-one bug in the compat settimeofday() usecs
validation code (Wang Yan)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=dSO3
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc timer fixes from Ingo Molnar:
- Fix timekeeping locking order bug in the timekeeping init code
(Mikhail Gavrilov)
- Fix u64 multiplication bug in the posix-cpu-timers code on 32-bit
kernels (Zhan Xusheng)
- Fix macro name in comment block (Ethan Nelson-Moore)
- Fix off-by-one bug in the compat settimeofday() usecs validation code
(Wang Yan)
* tag 'timers-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Fix off-by-one in compat settimeofday() usec validation
hrtimer: Correct CONFIG_NO_HZ_COMMON macro name in comment
posix-cpu-timers: Use u64 multiplication in update_rlimit_cpu()
timekeeping: Register default clocksource before taking tk_core.lock
|
||
|
|
83db48fb03 |
Misc CPU hotplug fixes:
- Fix CPU hotplug error handling rollback bug
(Bradley Morgan)
- Fix possible output OOB write bug in the sysfs
hotplug states printing code (Bradley Morgan)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=2MfA
-----END PGP SIGNATURE-----
Merge tag 'smp-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc CPU hotplug fixes from Ingo Molnar:
- Fix CPU hotplug error handling rollback bug (Bradley Morgan)
- Fix possible output OOB write bug in the sysfs hotplug states
printing code (Bradley Morgan)
* tag 'smp-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: hotplug: Bound hotplug states sysfs output
cpu: hotplug: Preserve per instance callback errors
|
||
|
|
d88eb9b843 |
- Fix event::addr_filter_ranges lifetime bug (Peter Zijlstra)
Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmo6vAQRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1jXbg/9F1Uv4AjgiEme2lBe2IFjdfT7ETjJobY2 PTEyxG5dY2rUPCgoom2cesHnAx0XjLXGZAm4gGdy0iApi9UMNqtrk4EH5lf3j5c4 x1KUUnvMcxbOxVR/Dcf0d9+AOeA9U8uv63+ANCNi3wSn13jT9d86Gf/ddrAwy70L MooAbNrz+v0EWeKWfWU4B1IYRDgMCXdX697J1cajcqaQU274QhgnsfhNaVPFCHdL Jlolea6gVlBmEhjHaqP1yGrh0ANCSBm5ti81CF++8Y4C/QzeJJ7W8vAD7kATjK1l 6hHgu9JZG7rLy0zBYUll9ODjvKQ35SQ5QEGU0EuKElQcZfkvbn63vqxjcih0/ZqG DbaOpZacF7cDU747O2wpYukQPo220Qkfdh4SpyB+E9pSKAHff7Ap0Aq8xVsNmRCG PbjIcUgHiWN73ulCmfz/UpxXPo8K8VgX5Jvuwl5MCwkMD0M9EbTq4xMSCgPlcYkz KG9jSPO7o3Lh+B0nvzPWOTsPGchqxt1WZSHNDVKpYkH0/4wuBl3odSE/McIcmGqs rdC5uk23Ke2ivUtHSKfrC0bB7BdBDdwRRczPrxm5tXJiEZkhA6G8mnXUgqxWDS63 mlPse0HhtSro7gHyp5kJHyCYHu9WBeSRAr+aVUkAOPBbhdmMAi83/4iML9qwSQ2u 5HRKf/FJr4o= =SNXq -----END PGP SIGNATURE----- Merge tag 'perf-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf event fix from Ingo Molnar: - Fix event::addr_filter_ranges lifetime bug (Peter Zijlstra) * tag 'perf-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix addr_filter_ranges lifetime |
||
|
|
d1c4b50f88 |
- Fix the incorrect RCU protection in rt_spin_unlock()
(Thomas Gleixner) Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmo6u1wRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1inTg/+K9TZr6kE3/Q53VSpGZfk40+Fsrt87Wq1 Bx9u6jsvSGQ2JuchwcPyQB15/zMHrRsEAZ5+oLm7ZI7faCe2EuyrYPuQ02eH1rzI 7lKYJhW//hV6GbtnFdF0WcTHIHpRS6jaiMToxbiX+jrR+vuTBdSALXjyJuZsc36v 9IpdJrA7c7UU5FDC1uHOGzQihf3Zij3+FF1CK/wl91NOSU/mzDZ0lb+LRxvnFUsR RqMMwYZGKWlw6JHA3cu1lFBqodQlpr/AP2usOTHC2L7+1zrQwnBXNOC3ZPy14gKd cSD2KzF/cbjdI+JyoYkWwTp6xeSONpylFbBNOu2uocI0czcASLAtfUN6sxqLk+DQ 9oLCwPDtpTA9IfpQYPhQt+Kt8Sh2o8YNRQIt1ihZ7KAgBfOUYnBGBzxeK3TIfOlS kLW2I1i1UxdYN1FQSzZ/3IQEMQyYEzO/W3A5jr1Rr7k0duZJPCq6Hjt3W58IlS9q 91kre98ARMBJkZ2zQAuXXk9zWA2NpjYNck9vWvBIswFLx6nUc+GqSNZ7+TWBJTgy 8V5urP6Y0zqrLuafwf5fvxviTVXwuXt+3qUYKgRIBUIRk59RbpuMwQhb/d2RGW8X qKdjvp8nSdTbYdYxOCOt/gngsZmifeXVTIT/iWMCGpArILdijJHwFs3labFpXthi dUEim9WgfiE= =6OD/ -----END PGP SIGNATURE----- Merge tag 'locking-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fix from Ingo Molnar: - Fix the incorrect RCU protection in rt_spin_unlock() (Thomas Gleixner) * tag 'locking-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rt: Fix the incorrect RCU protection in rt_spin_unlock() |
||
|
|
90ae888a37 |
Misc fixes:
- Fix an MM-CID race that can cause an OOB write
(Rik van Riel)
- Fix a debugobjects OOM handling race (Thomas Gleixner)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmo6t3URHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1iXwg/8CPIGhMJBMG97dl+m3Iq6RlzSNCTU6+Ho
AClN/+jtduU/sEedvFC150Yvjhe1p78hHkVuFyu4hvZaevFg4v70vz0TpsfOWS4p
wvKxEZpuhmDJTPBx8ZWq8oD+ZgKr0VVr0PQcHHiHggDKbb5UEY4H8SDHSx8bcJqg
2iq4NuOYZX+PRAmsPg0MAhpnfHiYkz2HPoLwDXkol0G53WMAzsKxroLO9bXni7WJ
PI+ru3WmecjqTaDDUgQO0LabLnl7vuEjsIQEK4tfQqlMWwepsrURcxNuL/61S38d
cmn4b2vnJ8G2pjLiKKv4imVdfrUh1TsoG7JakezTad+OQeKlThbkmdIST/FW5ey7
roI8Ux1+/S1G9orgbI+buNC1G5/Bi4RH7Y20DzjvlWRXc89OVsybBJn6owIgZgSS
ksGnsfBxbds9ErtKdp5aGhtJ9IKfIAO9OsoJh9gNxIyuqV0F03FDI5Tq7zuw/zPz
faEFHH9uTlBjEQbJAlpJ2Z4M4nNyMj8OMhZgw/kxq6ogJDa49kr0hnGdhd2b18v6
kNXkXERPoreKdkjeRC4/qwuhIxMSLISHDZEEt2gk2Rrl8ly62rMhOfn7BV4ffHnO
6/YasPW1iBLH4h6l8yoi3k8YEmjO0s+mEoMINxkdChJWot7EplsxUyWcziRMxkpi
Be5441cyO9o=
=bywo
-----END PGP SIGNATURE-----
Merge tag 'core-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc core fixes from Ingo Molnar:
- Fix an MM-CID race that can cause an OOB write (Rik van Riel)
- Fix a debugobjects OOM handling race (Thomas Gleixner)
* tag 'core-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Plug race against a concurrent OOM disable
sched/mmcid: Fix OOB clear_bit when CID is MM_CID_UNSET in fixup path
|
||
|
|
b59e4cae34 |
Miscellaneous irqchip driver fixes:
- Fix indexing bug in the Crossbar irqchip driver (Bhargav Joshi)
- Fix a parent domain resource leak in the Crossbar irqchip
driver (Bhargav Joshi)
- Fix resource leak in the ImgTec PDC irqchip driver's
exit logic (Qingshuang Fu)
- Fix macro name in comment block (Ethan Nelson-Moore)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=cDRs
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc irqchip driver fixes from Ingo Molnar:
- Fix indexing bug in the Crossbar irqchip driver (Bhargav Joshi)
- Fix a parent domain resource leak in the Crossbar irqchip driver
(Bhargav Joshi)
- Fix resource leak in the ImgTec PDC irqchip driver's exit logic
(Qingshuang Fu)
- Fix macro name in comment block (Ethan Nelson-Moore)
* tag 'irq-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi: Correct CONFIG_PCI_MSI_ARCH_FALLBACKS macro name in comment
irqchip/imgpdc: Fix resource leak, add missing chained handler cleanup on remove
irqchip/crossbar: Fix parent domain resource leak
irqchip/crossbar: Use correct index in crossbar_domain_free()
|