Multiple queues needs these bo_va objects belonging to
the same uq_mgr. So once they are mapped lets not unmap
them as at any point of time any of the queues might be
using it.
Also userq_va_mapped should be a boolean than atomic.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5c02889ea2)
The original addition operation in 64-bit unsigned type may encounter
overflow situations. To prevent such issues and safely reject invalid
inputs, the check_add_overflow() function is used.
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cc768f4dd0)
amdgpu_umc_handle_bad_pages() allocates err_data->err_addr before
querying UMC error information. In the direct and firmware query paths,
the pointer is reassigned to a fresh allocation before the original
buffer is released, so the initial allocation is leaked on each handled
event.
Free the existing buffer before replacing it in those query paths so the
function exit cleanup only owns the active allocation.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 911b1bdd22)
During Mode 1 reset, the ASIC undergoes a reset cycle and becomes temporarily
inaccessible via PCIe. Any attempt to access framebuffer or MMIO registers during
this window can result in uncompleted PCIe transactions, leading to NMI panics or
system hangs.
To prevent this, Unmap all of the applications mappings of the framebuffer
and doorbell BARs before mode1 reset. Also prevent new mappings from coming in
during the reset process.
v2: remove inode in kfd_dev (Christian)
v3: correct unmap offset (Felix), remove prevent new mappings part
to avoid deadlock (Christian)
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 70cadefcc6)
[Why&How]
dc_process_dmub_aux_transfer_async() copies payload->length bytes into a
16-byte stack buffer (dpaux.data[16]) guarded only by an ASSERT(), which
is a no-op in release builds. If a caller ever passes length > 16 this
results in a stack buffer overflow via memcpy.
Additionally, link_index is used to dereference dc->links[] without
bounds checking against dc->link_count, risking an out-of-bounds access.
Replace the ASSERT with a hard runtime check that returns false when
payload->length exceeds the destination buffer size, and add a bounds
check for link_index before it is used.
Assisted-by: GitHub Copilot:Claude claude-4-opus
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ba4caa9fec)
Cc: stable@vger.kernel.org
[Why&How]
The GPIO pin table parsers in get_gpio_i2c_info() and
bios_parser_get_gpio_pin_info() derive an element count from the VBIOS
table_header.structuresize field, then iterate over gpio_pin[] entries.
However, GET_IMAGE() only validates that the table header itself fits
within the BIOS image. If the VBIOS reports a structuresize larger than
the actual mapped data, the loop reads past the end of the BIOS image,
causing an out-of-bounds read.
Fix this by calling bios_get_image() to validate that the full claimed
structuresize is accessible within the BIOS image before entering the
loop in both functions.
Assisted-by: GitHub Copilot:claude-opus-4-6
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ba5e95b43b)
Cc: stable@vger.kernel.org
[Why&How]
The bounds check in bios_get_image() computes 'offset + size' using
unsigned 32-bit arithmetic before comparing against bios_size. If a
VBIOS image contains a near-UINT32_MAX offset the addition wraps to a
small value, the comparison passes, and the function returns a wild
pointer past the VBIOS mapping.
Additionally, the comparison uses '<' (strict), which incorrectly
rejects the valid exact-fit case where offset + size == bios_size.
Fix both issues by restructuring the check to avoid the addition
entirely: first reject if offset alone exceeds bios_size, then check
size against the remaining space (bios_size - offset). This eliminates
the overflow and correctly permits exact-fit accesses.
Assisted-by: GitHub Copilot:claude-opus-4.6
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d40fb392af)
Cc: stable@vger.kernel.org
allocate_sdma_queue has an option where the sdma queue id can be
specified (used by CRIU). We weren't bounds-checking that
value.
Confirm it's less than the maximum number of queues.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bfe9a7545b)
In amdgpu_seq64_alloc there is a possibility that two difference cores
from two separate NODES can try to and could get the same free slot.
So this fixes that race here using atomic test_and_set clear operations.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4d50a14d34)
allocated_doorbell has an option to set the doorbell id
to a specific value (used by CRIU). This value was not
bounds checked.
Check to confirm it's less than KFD_MAX_NUM_OF_QUEUES_PER_PROCESS.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1f087bb8cf)
The VCPU BO contains the actual FW at an offset, but
it was not calculated into the VCPU BO size.
Subtract this from the FW size to make sure there is
no out of bounds access.
This may fix VM faults when using VCE 3.
Cc: John Olender <john.olender@gmail.com>
Fixes: e982262214 ("drm/amdgpu: recalculate VCE firmware BO size")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 15c369257b)
The VCPU BO contains the actual FW at an offset, but
it was not calculated into the VCPU BO size.
Subtract this from the FW size to make sure there is
no out of bounds access.
Additionally, increase the VCE_V2_0_DATA_SIZE to
have extra space after the VCE handles.
Also increase the data size used for each VCE handle.
The FW needs 23744 bytes, use 24K to be safe.
This fixes VM faults when using VCE 2.
Cc: John Olender <john.olender@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/4802
Fixes: e982262214 ("drm/amdgpu: recalculate VCE firmware BO size")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a20d21df62)
The VCE1 firmware works slightly differently and is already
loaded by vce_v1_0_load_fw(). It doesn't actually need to
call amdgpu_vce_resume().
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 33d8951405)
The VCPU BO contains the actual FW at an offset, but
it was not calculated into the VCPU BO size.
Subtract this from the FW size to make sure there is
no out of bounds access.
Make sure the stack and data offsets are aligned to
the 32K TLB size.
Check that the FW microcode actually fits in the
space that is reserved for it.
Fixes: d4a640d4b9 ("drm/amdgpu/vce1: Implement VCE1 IP block (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c16fe59f62)
Only allocate entries from the GTT manager when the
VCE GTT node is not allocated yet. This prevents the
possibility of allocating them multiple times, which
causes issues during GPU reset and suspend/resume.
Fixes: 71aec08f80 ("amdgpu/vce: use amdgpu_gtt_mgr_alloc_entries")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8d2a20c172)
Previously, I had assumed this was not possible
so it was OK to not handle it, but now we got a report
from a user who has a board that is configured this way.
When the VCPU BO is already located in a low 32-bit address
in VRAM (eg. when VRAM is mapped to the low address space),
don't do the workaround.
Fixes: 71aec08f80 ("amdgpu/vce: use amdgpu_gtt_mgr_alloc_entries")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f370ec9b16)
The same thing is already checked a few lines above.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c1dc555e76)
When ensuring the low 32-bit address, make sure it is
less than 128 MiB, otherwise the VCE seems to fail to initialize.
This seems to be an undocumented limitation of the firmware
validation mechanism. Note that in case of VCE1 the BAR
address is zero and we can't change it also due to the
firmware validator.
When programming the mmVCE_VCPU_CACHE_OFFSETn registers,
don't AND them with a mask. This is incorrect because
the register mask is actually 0x0fffffff and useless because
we already ensure the addresses are below the limit.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e729ae5f3a)
The TLB is organized in groups of 8 entries, each one is 4K.
On Tahiti, the HW requires these GART entries to be 32K-aligned.
This fixes a VCE 1 firmware validation failure that can happen
after suspend/resume since we use amdgpu_gtt_mgr for VCE 1.
v2:
- Change variable declaration order
- Add comment about "V bit HW bug"
Fixes: 698fa62f56 ("drm/amdgpu: Add helper to alloc GART entries")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 530411b465)
The get_wave_state() function for v9 trusts cp_hqd_cntl_stack_size and
cp_hqd_cntl_stack_offset values read directly from the MQD, which are
written by GPU microcode and fully attacker-controlled on the
CRIU-restore path (via AMDKFD_IOC_RESTORE_PROCESS with H3).
this leads to an unbounded copy_to_user() that can leak adjacent
GTT/kernel memory. If offset > size, integer underflow produces a ~4 GiB
read length, if size is set to 1 MiB against a 4 KiB allocation, we leak
1 MiB of adjacent kernel memory (other queues' MQDs, ring buffers, KASLR
pointers).
Fix by clamping both cp_hqd_cntl_stack_size to the actual allocated
buffer size (q->ctl_stack_size) and cp_hqd_cntl_stack_offset to the
clamped size before performing arithmetic and copy_to_user().
This ensures we never read beyond the allocated kernel BO regardless of
attacker-supplied MQD field values.
Signed-off-by: Sunday Clement <Sunday.Clement@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7ef144458f)
In smu_v15_0_fini_smc_tables, dpm_policies was not freed or NULLed, causing a memory leak.
Add kfree() and NULL assignment to properly release memory and avoid dangling pointers.
Fixes: 2beedc3a92 ("drm/amd/pm: Add initial support for smu v15_0_8");
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 014f329074)
Discovery table may be kept at offset 0 by host driver. Remove the
validation check.
Fixes: 01bdc7e219 ("drm/amdgpu: New interface to get IP discovery binary v3")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d3f5bbd007)
va_cursor struct needs to be cleaned even if the mapping
has been removed already.
Also simplify it by make it a void function as return value
check isn't needed as its called during tear down.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4d35a45c9b)
amdgpu_gem_userptr_ioctl() currently accepts any value of args->addr
and only discovers an out-of-range pointer much later, inside
amdgpu_gem_object_create() and the HMM mirror registration path.
Userspace can drive that path with kernel-side virtual addresses;
the get_user_pages() layer rejects them, but only after the driver
has already allocated a GEM object and started wiring up notifier
state that then has to be torn down on failure.
Add an access_ok() guard at the top of the ioctl, right after the
existing page-alignment check and before flag validation, so any
address that does not lie within the calling task's user address
range is rejected with -EFAULT before any allocation occurs. No
legitimate ROCm/HSA userspace passes kernel-mode pointers through
this interface, so this is defense-in-depth rather than a behaviour
change for valid callers; -EFAULT matches the convention already
used by other uaccess-style rejections in the kernel.
Also add an explicit #include <linux/uaccess.h>; access_ok() is
otherwise only available transitively through other headers in
this translation unit.
Signed-off-by: Amir Shetaia <Amir.Shetaia@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7a076df363)
VPE1 could possibly hang and fail to power off at the end of commands in
collaboration mode. This workaround adds a COLLAB_SYNC after TRAP to
force instances synchronized to avoid VPE1 fail to power off.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alan liu <haoping.liu@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5171
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a8b749c5c5)
Cc: stable@vger.kernel.org
Pagefaults does not have process information correctly populated
as vm->task is not set during vm_init but should be updated while
real submission. So setting that up during signal_ioctl to get
the correct submission process details.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a9b14d88b4)
While tear down of a userq_mgr is happening when all the queues
are free we should cancel any reset work if pending before exiting.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 160164609f)
It is illegal to schedule reset work from another reset work!
Fix this by scheduling the userq reset work directly on the work queue
of the reset domain.
Not fully tested, I leave that to the IGT test cases.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fd9200ccef)
mqd and fw objects are queue core objects which should remain
valid and never be unmapped and evicted for user queues to work
properly.
During eviction if these buffers are evicted the hw continue to
use the invalid addresses and caused page faults and system hung.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a3bbf32a33)
To access the bo from vm mapping first lock the root bo and
then the object bo of the mapping to make sure both locks
are taken safely.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3aab504106)
Ubuf pages should not be mmaped or exported. Remove the ubuf mmap callback
and return -EOPNOTSUPP when exporting ubuf objects.
ubuf vmap is also removed for there is not a real use case yet.
Fixes: bd72d4acda ("accel/amdxdna: Support user space allocated buffer")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260518155706.937461-1-lizhi.hou@amd.com
cifs.spnego key descriptions contain authority-bearing fields such as
pid, uid, creduid, and upcall_target that cifs.upcall treats as
kernel-originating inputs. However, userspace can also create keys of
this type through request_key(2) or add_key(2), allowing those fields to
be supplied without CIFS origin.
Only accept cifs.spnego descriptions while CIFS is using its private
spnego_cred to request the key.
Fixes: f1d662a7d5 ("[CIFS] Add upcall files for cifs to use spnego/kerberos")
Assisted-by: avom-custom-harness:gpt-5.5-qwen3.6-mod-mix
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Asim Viladi Oglu Manizada <manizada@pm.me>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit 96c4af4185 ("cifs: Fix locking usage for tcon fields")
refactored cifs code to change cifs_tcp_ses_lock for tc_lock around
tc_count changes.
There was missing lock around tc_count increment inside
smb2_find_smb_sess_tcon_unlocked().
Cc: stable@vger.kernel.org
Fixes: 96c4af4185 ("cifs: Fix locking usage for tcon fields")
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If xe_lrc_create() fails, the secondary queue added to the
multi-queue group list is not removed before freeing the
queue. Fix error path handling for secondary queues by
removing it from the multi-queue group list at the right
place.
Reported-by: Sebastian Österlund <sebastian.osterlund@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/work_items/7979
Fixes: d716a5088c ("drm/xe/multi_queue: Handle tearing down of a multi queue")
Cc: stable@vger.kernel.org # v7.0+
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260518191639.320890-2-niranjana.vishwanathapura@intel.com
(cherry picked from commit d2d23c1278)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The LTE enabled version of the IdeaPad Duet 3 10IGL5 needs the
same quirk as the non-LTE version. As these are the only two
IdeaPad Duet 3 10IGL5 versions, we can safely use non exact matching.
Tested on a IdeaPad Duet 3 10IGL5-LTE.
Signed-off-by: Marius Hoch <mail@mariushoch.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Since commit
5894cf571e ("acpi/prmt: Use EFI runtime sandbox to invoke PRM handlers")
ACPI PRM calls are delegated to a workqueue which runs in a kernel
thread, making it easier to detect and mitigate faulting memory accesses
performed by the firmware.
Rafael reports that such PRM accesses may occur before efisubsys_init()
executes, which is where the workqueue is allocated, leading to NULL
pointer dereferences. Since acpi_init() [which triggers the early PRM
accesses] executes as a subsys_initcall() as well, and has its own
dependencies that may be sensitive to initcall ordering, deferring
acpi_init() is not an option.
So instead, split off the workqueue allocation into its own postcore
initcall, as this is the only missing piece to allow EFI runtime calls
to be made. This ensures that EFI runtime call (including PRM calls) are
accessible to all code running at subsys_initcall() level.
Cc: <stable@vger.kernel.org>
Fixes: 5894cf571e ("acpi/prmt: Use EFI runtime sandbox to invoke PRM handlers")
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The default case in snd_soc_ret() use va_start without va_end to
cleanup "args" object which can cause undefined behavior. So, add
missing va_end to cleanup "args" object.
This is reported by Coverity Scan as "Missing varargs init or cleanup".
Fixes: 943116ba2a ("ASoC: add common snd_soc_ret() and use it")
Signed-off-by: Robertus Diawan Chris <robertusdchris@gmail.com>
Link: https://patch.msgid.link/20260519054024.274741-1-robertusdchris@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
post-7.1 issues or aren't deemed suitable for backporting.
There's a 2 patch MAINTAINERS series from Mike Rapoport which updates us
for the new KEXEC/KDUMP/crash/LUO/etc arrangements. And a 2 patch series
from Muchun Song to fix a couple of memory-hotplug issues. Otherwise
singletons, please see the changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCagviKQAKCRDdBJ7gKXxA
jlbsAP9SEShHxXEYcRMVQtXb+8/iJDe7J3KwVDP4e0VOlQKTPAD/c+C2bx4nllOG
77wl9Qkr++KqTSmoPbzA7Q02gJC2ngQ=
=2qN3
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2026-05-18-21-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"14 hotfixes. 9 are for MM. 10 are cc:stable and the remainder are for
post-7.1 issues or aren't deemed suitable for backporting.
There's a two-patch MAINTAINERS series from Mike Rapoport which
updates us for the new KEXEC/KDUMP/crash/LUO/etc arrangements. And
another two-patch series from Muchun Song to fix a couple of
memory-hotplug issues. Otherwise singletons, please see the changelogs
for details"
* tag 'mm-hotfixes-stable-2026-05-18-21-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/memory: fix spurious warning when unmapping device-private/exclusive pages
mm: fix __vm_normal_page() to handle missing support for pmd_special()/pud_special()
drivers/base/memory: fix memory block reference leak in poison accounting
mm/memory_hotplug: fix memory block reference leak on remove
lib: kunit_iov_iter: fix test fail on powerpc
mm/page_alloc: fix initialization of tags of the huge zero folio with init_on_free
MAINTAINERS: add kexec@ list to LIVE UPDATE ENTRY
MAINTAINERS: add tree for KDUMP and KEXEC
selftests/mm: run_vmtests.sh: fix destructive tests invocation
scripts/gdb: slab: update field names of struct kmem_cache
scripts/gdb: mm: cast untyped symbols in x86_page_ops
mm/damon: fix damos_stat tracepoint format for sz_applied
mm/damon/sysfs-schemes: call missing mem_cgroup_iter_break()
mm/migrate_device: fix spinlock leak in migrate_vma_insert_huge_pmd_page
In map_vdso(), if a failure occurs during the installation of the VVAR
mappings, the error path attempts to clean up previously allocated mappings
using do_munmap(). However, the cleanup for the VVAR mapping is incorrectly
using image->size (the size of the vDSO text) instead of the actual size
allocated for the VVAR area.
Replace the incorrect do_munmap() image->size parameter with the constant
VDSO_NR_PAGES * PAGE_SIZE. Ensure the unmap size exactly matches the size
used during the vdso_install_vvar_mapping() phase to provide a symmetrical
and complete teardown of the memory region.
Fixes: e93d2521b2 ("x86/vdso: Split virtual clock pages into dedicated mapping")
Signed-off-by: Guilherme Giacomo Simoes <trintaeoitogc@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20260503191609.551817-1-trintaeoitogc@gmail.com
Add TDP data for laptop model GU605CP.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260517220005.4594-5-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add TDP data for laptop model FA401EA.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260517220005.4594-4-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add TDP data for laptop model G614FR.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260517220005.4594-3-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add TDP data for laptop model FX607VU.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260517220005.4594-2-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The mini-LED current_value attribute does not work on devices that use
ASUS_WMI_DEVID_MINI_LED_MODE2 (2024 and newer models).
Reading is broken: mini_led_mode_current_value_show() fetches the mode
from the device but then decodes a literal 0 instead of the value it
just read:
mode = FIELD_GET(ASUS_MINI_LED_MODE_MASK, 0);
So mode is always 0, and the attribute always reports the same thing
regardless of the real hardware state.
Writing is broken too. The number a user writes is an index; the value
the firmware actually wants is looked up from that index in
mini_led_mode_map[]. mini_led_mode_current_value_store() skips that
lookup and passes the raw index straight to armoury_attr_uint_store().
On 2024 devices the firmware numbers its modes differently from the
index, so some writes are rejected with -EINVAL and the rest send the
wrong mode to the hardware.
Fix both paths: decode the value actually read from the device when
reading, and look up the firmware value before sending it when
writing. Older (MODE1) devices were unaffected because there the index
and the firmware value are the same.
Fixes: f99eb09809 ("platform/x86: asus-armoury: move existing tunings to asus-armoury module")
Signed-off-by: Ahmed Yaseen <yaseen@ghoul.dev>
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260517182957.11069-1-yaseen@ghoul.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
After a PCIe Uncorrectable Error has been reported by a device with
Intel Vendor Specific Extended Capabilities and has been recovered
through a Secondary Bus Reset, its driver calls intel_vsec_pci_probe()
to rescan and reinitialize VSECs.
intel_vsec_pci_probe() invokes pcim_enable_device() and thereby adds
another devm action which calls pcim_disable_device() on driver unbind.
So once the driver unbinds, pcim_disable_device() will be called as many
times as an Uncorrectable Error occurred, plus one. This will lead to
an enable_cnt imbalance on driver unbind.
Additionally, since commit dc957ab6aa ("platform/x86/intel/vsec: Add
private data for per-device data"), a devm_kzalloc() allocation is
leaked on every Uncorrectable Error.
Avoid by splitting the VSEC rescan out of intel_vsec_pci_probe() into a
separate helper and calling that on PCIe error recovery.
Fixes: 936874b77d ("platform/x86/intel/vsec: Add PCI error recovery support to Intel PMT")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v6.0+
Link: https://patch.msgid.link/bd594d09fa866dc51dddc9a447c3b23f9b1402cc.1778736835.git.lukas@wunner.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
BC.cond instructions introduced by FEAT_HBC cannot be executed
out-of-line, like other branch instructions. However, they can be
simulated in the same way as B.cond instructions.
Extend the B.cond decoder mask to match BC.cond instructions as well,
and handle them using the existing B.cond simulation path.
Fixes: 7f86d128e4 ("arm64: add HWCAP for FEAT_HBC (hinted conditional branches)")
Cc: <stable@vger.kernel.org>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
It seems that on some older models (~2020) the battery charging limit
can permanently damage the battery. Prevent users from enabling this
feature thru the "force" module parameter to avoid causing permanent
hardware damage on such devices.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Link: https://www.reddit.com/r/XMG_gg/comments/ld9yyf/battery_limit_hidden_function_discovered_on/
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260512232145.329260-5-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Users might want to force-enable all possible features even on
machines with a valid device descriptor. Until now the "force"
module param was ignored on such machines. Fix this to make
it easier to test for support of new features.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260512232145.329260-4-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The power supply sysfs ABI states that:
Not all hardware is capable of setting this to an arbitrary
percentage. Drivers will round written values to the nearest
supported value. Reading back the value will show the actual
threshold set by the driver.
The driver currently violates this ABI by rejecting a charging
threshold of 0. Fix this by clamping this value to 1.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260512232145.329260-3-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
