Document two optional cells in eswin,hsp-sp-csr for the TXD and RXD
delay control register offsets.
These registers are used by the driver to clear any residual delay
configuration left by the bootloader, ensuring that MAC-side RGMII delay
settings are applied solely according to the kernel configuration.
Add a reference to the EIC7700X SoC Technical Reference Manual for
background information about the HSP CSR block.
Fixes: 888bd0eca9 ("dt-bindings: ethernet: eswin: Document for EIC7700 SoC")
Signed-off-by: Zhi Li <lizhi2@eswincomputing.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260518022023.427-1-lizhi2@eswincomputing.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail
to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when
moving frags from source to destination. __pskb_copy_fclone() defers
the rest of the shinfo metadata to skb_copy_header() after copying
frag descriptors, but that helper only carries over gso_{size,segs,
type} and never touches skb_shinfo()->flags; skb_shift() moves frag
descriptors directly and leaves flags untouched. As a result, the
destination skb keeps a reference to the same externally-owned or
page-cache-backed pages while reporting skb_has_shared_frag() as
false.
The mismatch is harmful in any in-place writer that uses
skb_has_shared_frag() to decide whether shared pages must be detoured
through skb_cow_data(). ESP input is one such writer (esp4.c,
esp6.c), and a single nft 'dup to <local>' rule -- or any other
nf_dup_ipv4() / xt_TEE caller -- is enough to land a pskb_copy()'d
skb in esp_input() with the marker stripped, letting an unprivileged
user write into the page cache of a root-owned read-only file via
authencesn-ESN stray writes.
Set SKBFL_SHARED_FRAG on the destination whenever frag descriptors
were actually moved from the source. skb_copy() and skb_copy_expand()
share skb_copy_header() too but linearize all paged data into freshly
allocated head storage and emerge with nr_frags == 0, so
skb_has_shared_frag() returns false on its own; they need no change.
The same omission exists in skb_gro_receive() and skb_gro_receive_list().
The former moves the incoming skb's frag descriptors into the
accumulator's last sub-skb via two paths (a direct frag-move loop and
the head_frag + memcpy path); the latter chains the incoming skb whole
onto p's frag_list. Downstream skb_segment() reads only
skb_shinfo(p)->flags, and skb_segment_list() reuses each sub-skb's
shinfo as the nskb -- both p and lp must carry the marker.
The same omission also exists in tcp_clone_payload(), which builds an
MTU probe skb by moving frag descriptors from skbs on sk_write_queue
into a freshly allocated nskb. The helper falls into the same family
and warrants the same fix for consistency; no TCP TX-side in-place
writer is currently known to reach a user page through this gap, but
a future consumer depending on the marker would regress silently.
The same omission exists in skb_segment(): the per-iteration flag
merge takes only head_skb's flag, and the inner switch that rebinds
frag_skb to list_skb on head_skb-frags exhaustion does not fold the
new frag_skb's flag into nskb. Fold frag_skb's flag at both sites
so segments drawing frags from frag_list members carry the marker.
Fixes: cef401de7b ("net: fix possible wrong checksum generation")
Fixes: f4c50a4034 ("xfrm: esp: avoid in-place decrypt on shared skb frags")
Suggested-by: Sabrina Dubroca <sd@queasysnail.net>
Suggested-by: Sultan Alsawaf <sultan@kerneltoast.com>
Suggested-by: Ben Hutchings <ben@decadent.org.uk>
Suggested-by: Lin Ma <malin89@huawei.com>
Suggested-by: Jingguo Tan <tanjingguo@huawei.com>
Suggested-by: Aaron Esau <aaron1esau@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Tested-by: Rajat Gupta <rajat.gupta@oss.qualcomm.com>
Link: https://patch.msgid.link/ageeJfJHwgzmKXbh@v4bel
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Blamed commit moved the TIME_WAIT-derived ISN from the skb control
block to a per-CPU variable, assuming the value would always be consumed
by tcp_conn_request() for the same packet that wrote it. That assumption
is violated by multiple drop paths between the producer
(__this_cpu_write(tcp_tw_isn, isn) in tcp_v{4,6}_rcv()) and the consumer
(tcp_conn_request()):
- min_ttl / min_hopcount check
- xfrm policy check
- tcp_inbound_hash() MD5/AO mismatch
- tcp_filter() eBPF/SO_ATTACH_FILTER drop
- th->syn && th->fin discard in tcp_rcv_state_process() TCP_LISTEN
- psp_sk_rx_policy_check() in tcp_v{4,6}_do_rcv()
- tcp_checksum_complete() in tcp_v{4,6}_do_rcv()
- tcp_v{4,6}_cookie_check() returning NULL
When a packet is dropped on any of these paths, tcp_tw_isn is left set.
The next SYN processed on the same CPU then consumes the non zero value in
tcp_conn_request(), receiving a potentially predictable ISN.
This patch moves back tcp_tw_isn to skb->cb[], getting rid of the per-cpu
variable.
Note that tcp_v{4,6}_fill_cb() do not set it.
Very litle impact on overall code size/complexity:
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 2/1 up/down: 8/-15 (-7)
Function old new delta
tcp_v6_rcv 3038 3042 +4
tcp_v4_rcv 3035 3039 +4
tcp_conn_request 2938 2923 -15
Total: Before=24436060, After=24436053, chg -0.00%
Fixes: 41eecbd712 ("tcp: replace TCP_SKB_CB(skb)->tcp_tw_isn with a per-cpu field")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260519084611.2485277-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
udp_tunnel: Speed up UDP tunnel device destruction (Part II)
Most of the UDP tunnel devices called synchronize_rcu() twice
during destruction, for example, vxlan had
1) synchronize_rcu() in udp_tunnel_sock_release()
2) synchronize_net() in vxlan_sock_release()
The former was already removed by:
https://lore.kernel.org/netdev/20260502031401.3557229-1-kuniyu@google.com/
This series removes the latter.
Patch 1 & 2 & 4 remove synchronize_net() placed before
udp_tunnel_sock_release().
Patch 3 removes yet another unnecessary synchronize_net() in
geneve_unquiesce().
Patch 5 is a follow-up patch for a sparse report by kernel test robot.
====================
Link: https://patch.msgid.link/20260518050726.318824-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
kernel test robot reported sparse warning in bareudp_sock_release():
drivers/net/bareudp.c:288:12: warning: incorrect type in assignment (different address spaces)
drivers/net/bareudp.c:288:12: expected struct sock *sk
drivers/net/bareudp.c:288:12: got struct sock [noderef] __rcu *sk
The warning is not new and exists since the initial bareudp commit
571912c69f ("net: UDP tunnel encapsulation module for tunnelling
different protocols like MPLS, IP, NSH etc.").
Let's use rtnl_dereference().
Note that bareudp_sock_release() is called from bareudp_stop()
under RTNL, so there is no real issue even without the helper.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605062359.e3gOfZCr-lkp@intel.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260518050726.318824-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
synchronize_net() in bareudp_sock_release() has existed since
day 1, commit 571912c69f ("net: UDP tunnel encapsulation module
for tunnelling different protocols like MPLS, IP, NSH etc.").
It was most likely copied from a similar tunneling device like
vxlan or geneve.
bareudp_sock_release() is called from dev->netdev_ops->ndo_stop(),
and synchronize_net() in unregister_netdevice_many_notify() ensures
that inflight bareudp fast paths finish before bareudp_dev is freed.
Let's remove the redundant synchronize_net() in bareudp_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260518050726.318824-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When changing the geneve config, geneve_changelink() sandwiches
the config memcpy() between geneve_quiesce() and geneve_unquiesce().
geneve_quiesce() temporarily clears geneve->sock[46] and their
sk_user_data, and then calls synchronize_net() to wait for inflight
fast paths to finish.
geneve_unquiesce() then restores the cleared pointers, but it also
superfluously calls synchronize_net().
The latter synchronize_net() provides no benefit; with or without it,
inflight fast paths can see either the NULL pointers or the original
pointers alongside the new configuration.
Let's remove the redundant synchronize_net() in geneve_unquiesce().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260518050726.318824-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vxlan previously had an issue where the fast path could access
stale pointers, which was fixed by commit c6fcc4fc5f ("vxlan:
avoid using stale vxlan socket.").
geneve later followed the same pattern, and commit fceb9c3e38
("geneve: avoid using stale geneve socket.") copied synchronize_net()
from vxlan_sock_release() into geneve_sock_release().
However, that change occurred after commit ca065d0cf8 ("udp: no
longer use SLAB_DESTROY_BY_RCU"), and geneve had already been
using kfree_rcu() to free geneve_sock.
Therefore, the synchronize_net() was never actually needed there.
Let's remove the redundant synchronize_net() in geneve_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260518050726.318824-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Initially, a dedicated workqueue was used to defer calling
udp_tunnel_sock_release(vxlan_sock->sock) and kfree(vxlan_sock).
Later, commit 0412bd931f ("vxlan: synchronously and race-free
destruction of vxlan sockets") removed the workqueue and instead
invoked these two functions immediately after synchronize_net().
This was intended to prevent UAF of the UDP socket in the fast path.
( Note that the "nondeterministic behaviour" mentioned in that
commit was not addressed, as another thread not waiting RCU gp
still sees the same behaviour. )
However, a week prior to that change, commit ca065d0cf8 ("udp:
no longer use SLAB_DESTROY_BY_RCU") had already moved UDP socket
freeing to after the RCU grace period. This made the synchronize_net()
in vxlan_sock_release() completely redundant.
Since vxlan_sock now uses kfree_rcu() and is invoked after
udp_tunnel_sock_release(), vxlan_sock is guaranteed to be freed
either at the same time or after the UDP socket is released,
following the RCU grace period.
Let's remove the redundant synchronize_net() in vxlan_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260518050726.318824-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vmci_transport_recv_connecting_server() returned err = 0 for a peer
RST in its default switch arm:
err = pkt->type == VMCI_TRANSPORT_PACKET_TYPE_RST ? 0 : -EINVAL;
That made vmci_transport_recv_listen() skip vsock_remove_pending(),
leaving the pending socket on the listener's pending_links with
sk_state = TCP_CLOSE while destroy: still dropped the explicit
reference taken before schedule_delayed_work().
One second later vsock_pending_work() observed is_pending=true and
performed full cleanup: vsock_remove_pending() then the two trailing
sock_put(sk) calls -- the first reached refcount 0 and __sk_freed
the socket, and the second wrote into the freed object:
BUG: KASAN: slab-use-after-free in refcount_warn_saturate
Write of size 4 at addr ffff88800b1cac80 by task kworker
Workqueue: events vsock_pending_work
Treat peer RST like any other unexpected packet type (err = -EINVAL).
All destroy: arms now return err < 0, so vmci_transport_recv_listen()
removes pending from pending_links synchronously and
vsock_pending_work() takes the is_pending=false / !rejected branch,
dropping only its own work reference. This also closes the
multi-packet race Sashiko reported on v2: pending is removed from
the list before any subsequent packet can find it.
The pre-existing sk_acceptq_removed() gap on the err < 0 path of
vmci_transport_recv_listen() that Sashiko also noted is not
introduced or changed by this patch.
Tested on lts-6.12.79 with KASAN: 52/100 unpatched -> 0/100 patched.
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Cc: stable@vger.kernel.org
Signed-off-by: Minh Nguyen <minhnguyen.080505@gmail.com>
Acked-by: Bryan Tan <bryan-bt.tan@broadcom.com>
Link: https://patch.msgid.link/20260519102310.237181-1-minhnguyen.080505@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
net/sched: sch_drr: lockless cl->deficit and cl->quantum
First patch adds missing annotations around cl->deficit.
Second patch makes cl->quantum lockless, to prepare
future lockless qdisc dumps.
====================
Link: https://patch.msgid.link/20260519094618.2632073-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
drr_dump_class_stats() runs without qdisc spinlock held.
Add missing READ_ONCE()/WRITE_ONCE() annotations around cl->deficit.
Fixes: edb09eb17e ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260519094618.2632073-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 5e138e0ec3 ("w5100: remove MMIO support") removes
include/linux/platform_data/wiznet.h, but misses to remove the file entry
in NETWORKING DRIVERS referring to that file.
Remove the obsolete file entry in NETWORKING DRIVERS.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260519091646.302458-1-lukas.bulwahn@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If zl3073x_dpll_pin_register() fails, the allocated pin is not yet
added to zldpll->pins list. The error path calls
zl3073x_dpll_pins_unregister() which only iterates pins on the list,
so the current pin is leaked. Free the pin before jumping to the error
label.
Additionally move the pin->dpll_pin = NULL assignment in
zl3073x_dpll_pin_register() from err_register to the common
err_pin_get path. When dpll_pin_get() fails, pin->dpll_pin holds an
ERR_PTR value. Without this fix the subsequent zl3073x_dpll_pin_free()
would trigger a spurious WARN because it checks pin->dpll_pin for
non-NULL.
Fixes: 75a71ecc24 ("dpll: zl3073x: Register DPLL devices and pins")
Reviewed-by: Petr Oros <poros@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260519132205.161847-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace in the list
terminator.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20260519140101.1584946-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260519142710.1587324-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
While touching these arrays, unify usage of whitespace in the list
terminator.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260519145722.1590298-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
While touching this array, unify usage of whitespace in the list
terminator to what most other arrays are using.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20260519153613.1594429-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled array, only its representation in
source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260519160721.1597568-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It turns out ip_rt_bug() can be called more than expected.
syzbot will still panic (because of panic_on_warn=1), but non debug
kernels will no longer die while repeating stack traces on the console.
Fixes: c378a9c019 ("ipv4: Give backtrace in ip_rt_bug().")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260519193248.4018872-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot was able to trigger ip_rt_bug() in a loop, using an IPv4 packet
with a crafted IPOPT_SSRR option:
options: ipv4_options {
options: array[ipv4_option] {
union ipv4_option {
ssrr: ipv4_option_route[IPOPT_SSRR] {
type: const = 0x89 (1 bytes)
length: len = 0x7 (1 bytes)
pointer: int8 = 0xa2 (1 bytes)
data: array[ipv4_addr] {
union ipv4_addr {
broadcast: const = 0xffffffff (4 bytes)
}
}
}
}
Change __icmp_send() to not send ICMP to broadcast/multicast destinations.
Fixes: c378a9c019 ("ipv4: Give backtrace in ip_rt_bug().")
Reported-by: syzbot+c13a57c2639c2c0d03a6@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a0cc169.170a0220.1f6c2d.0004.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260519200836.4141061-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net_devmem_bind_dmabuf() trusts dmabuf->size and sg_dma_len() to be
PAGE_SIZE multiples without checking:
- tx_vec is sized dmabuf->size / PAGE_SIZE, and
net_devmem_get_niov_at() only bounds-checks virt_addr < dmabuf->size
before indexing tx_vec[virt_addr / PAGE_SIZE]. With size =
N*PAGE_SIZE + r (1 <= r < PAGE_SIZE), sendmsg() at iov_base =
N*PAGE_SIZE passes the bound check and reads tx_vec[N] -- one past.
- owner->area.num_niovs = len / PAGE_SIZE while gen_pool_add_owner()
covers the full byte len, so a non-page-multiple non-final sg
desyncs num_niovs from the gen_pool region for every later sg, on
both RX and TX.
dma-buf does not require page-aligned sizes, so the bind path has to
enforce what its own indexing assumes. Reject both with -EINVAL.
The size check is TX-only (only tx_vec is sized off dmabuf->size); the
SG-length check covers both directions.
Fixes: bd61848900 ("net: devmem: Implement TX path")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20260519203530.66310-1-devnexen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- hci_sync: Fix not setting mask for HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE
- L2CAP: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del()
- ISO: drop ISO_END frames received without prior ISO_START
- MGMT: validate Add Extended Advertising Data length
- bnep: Fix UAF read of dev->name
- btmtk: fix urb->setup_packet leak in error paths
- btintel_pcie: Fix incorrect MAC access programming
- hci_uart: fix UAFs and race conditions in close and init paths
-----BEGIN PGP SIGNATURE-----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=9q+B
-----END PGP SIGNATURE-----
Merge tag 'for-net-2026-05-20' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_sync: Fix not setting mask for HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE
- L2CAP: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del()
- ISO: drop ISO_END frames received without prior ISO_START
- MGMT: validate Add Extended Advertising Data length
- bnep: Fix UAF read of dev->name
- btmtk: fix urb->setup_packet leak in error paths
- btintel_pcie: Fix incorrect MAC access programming
- hci_uart: fix UAFs and race conditions in close and init paths
* tag 'for-net-2026-05-20' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del()
Bluetooth: hci_uart: fix UAFs and race conditions in close and init paths
Bluetooth: MGMT: validate Add Extended Advertising Data length
Bluetooth: btmtk: fix urb->setup_packet leak in error paths
Bluetooth: ISO: drop ISO_END frames received without prior ISO_START
Bluetooth: btintel_pcie: Fix incorrect MAC access programming
Bluetooth: hci_sync: Fix not setting mask for HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE
Bluetooth: bnep: Fix UAF read of dev->name
====================
Link: https://patch.msgid.link/20260520204959.2902497-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xingwang Xiang says:
====================
bpf, skmsg: fix verdict sk_data_ready racing with ktls rx
sk_psock_verdict_data_ready() lacks the tls_sw_has_ctx_rx() guard that
sk_psock_strp_data_ready() gained in e91de6afa8. When a socket is
inserted into a sockmap (BPF_SK_SKB_VERDICT) before TLS RX is configured,
the missing guard causes tcp_read_skb() to drain sk_receive_queue without
advancing copied_seq, leaving a dangling frag_list pointer that
tls_decrypt_sg() walks — a use-after-free.
Patch 1 mirrors the fix from e91de6afa81c: add the tls_sw_has_ctx_rx()
check to sk_psock_verdict_data_ready() so that when a TLS RX context is
present the function defers to psock->saved_data_ready (sock_def_readable)
instead of calling tcp_read_skb().
Patch 2 adds a selftest that drives the vulnerable sequence end-to-end
and verifies recv() returns the correct decrypted data.
====================
Link: https://patch.msgid.link/20260517145630.20521-1-v3rdant.xiang@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test the scenario where a socket is inserted into a sockmap with a
BPF_SK_SKB_VERDICT program before TLS RX is configured. Previously
sk_psock_verdict_data_ready() would call tcp_read_skb() and drain the
receive queue without advancing copied_seq, causing tls_decrypt_sg()
to walk a dangling frag_list pointer (use-after-free).
The test drives the full vulnerable sequence and verifies that after
the fix recv() returns the correct decrypted data.
Signed-off-by: Xingwang Xiang <v3rdant.xiang@gmail.com>
Link: https://patch.msgid.link/20260517145630.20521-3-v3rdant.xiang@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk_psock_strp_data_ready() already checks tls_sw_has_ctx_rx() and
defers to psock->saved_data_ready when a TLS RX context is present,
avoiding a conflict with the TLS strparser's ownership of the receive
queue (commit e91de6afa8, "bpf: Fix running sk_skb program types
with ktls").
sk_psock_verdict_data_ready() has no equivalent guard. When a socket
is inserted into a sockmap (BPF_SK_SKB_VERDICT) before TLS RX is
configured, tls_sw_strparser_arm() saves sk_psock_verdict_data_ready
as rx_ctx->saved_data_ready. On data arrival:
tls_data_ready -> tls_strp_data_ready -> tls_rx_msg_ready
-> saved_data_ready() = sk_psock_verdict_data_ready()
-> tcp_read_skb() drains sk_receive_queue via __skb_unlink()
without calling tcp_eat_skb(), so copied_seq is not advanced.
tls_strp_msg_load() then finds tcp_inq() >= full_len (stale), calls
tcp_recv_skb() on the now-empty queue, hits WARN_ON_ONCE(!first), and
returns with rx_ctx->strp.anchor.frag_list pointing at a psock-owned
(potentially freed) skb. tls_decrypt_sg() subsequently walks that
frag_list: use-after-free.
Apply the same fix as sk_psock_strp_data_ready(): if a TLS RX context
is present, call psock->saved_data_ready (sock_def_readable) to wake
recv() waiters and return immediately, leaving the receive queue
untouched. TLS retains sole ownership of the queue and decrypts the
record normally through tls_sw_recvmsg().
Fixes: ef5659280e ("bpf, sockmap: Allow skipping sk_skb parser program")
Signed-off-by: Xingwang Xiang <v3rdant.xiang@gmail.com>
Link: https://patch.msgid.link/20260517145630.20521-2-v3rdant.xiang@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Store the per-DMB connection pointers in the SMCD device allocation
instead of allocating a separate connection array.
This keeps the connection table tied to the SMCD device lifetime and
simplifies the allocation and cleanup paths.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Link: https://patch.msgid.link/20260519005206.628071-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PPCNT group 0x10 (per-priority counters) carries an rx_discards field at
offset 0x78. These counters aggregate up into if_in_discards, but don't
show up anywhere else. Since there are many things that aggregate into
`if_in_discards`, having these counters helps distinguish what caused
those discards (in my case they were caused by headroom buffer overruns
due to inappropriately configured buffer sizes).
Of note, from emperical testing, these counter are per-"priority group"
(PG) not per-"switch priority". It's a bit confusing, because the rest
of these counter are per-"switch priority" and the header file calls
these "Per Priority Group Counters". However, that should be read as
"(Per Priority) Group Counters", not "Per (Priority Group) Counters".
I attempted to distinguish this in the counter naming by calling these
`rx_discards_pg_N` rather than `rx_discards_prio_N` (which is the
naming scheme of the other counters in this PPCNT group).
I will also note that the mlx5 driver (which already has this counter)
uses the schme `rx_prioN_discards` (and same for the other counters
in this group). However, I was unable to determine whether the mlx5
counters behave the same as the mlxsw counters with respect to PG
mapping. An attempt to remap to a different PG there did not change
which counter incremented, but the mlx5 configuration code is quite
different, so it's possible the remapping needs to be done differently.
Signed-off-by: Keno Fischer <keno@juliahub.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/agqkMwgM1PdkyMUR@juliahub.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allison Henderson says:
====================
selftests: rds: Add ROCE support to rds selftests
Currently the rds selftests only tests the tcp transport. This means
most of rds_rdma.ko has no testing coverage. This series refactors the
rds self tests to add an rdma option when running tests. When used,
the test creates a pair of ROCE interfaces to run the payloads through.
Most of this set is refactoring the existing test.py module. Since most
of this code is one long procedure, it is difficult to modularize it
without creating a lot of pylint complaints about lengthy functions
with too many variables or branches.
Patch 1 fixes an RDS-IB shutdown hang exposed by the new ROCE selftests
in patches 10/11. The next seven patches break down test.py into helper
functions. After we have modularized the send/recv packet logic, we
introduce the new ROCE equivalent network configurations, add the new
command line flags to build and run the test with rdma support.
====================
Link: https://patch.msgid.link/20260518012443.2629206-1-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds support for testing rds rdma over ROCE. A new
-r flag is added to config.sh which enables the required kernel
configs for rdma. We also add a -T flag to run.sh, which takes
a transport option, tcp or rdma. The rdma option will check to
ensure the proper configs have been enabled. The flag is then
passed to test.py, which will run the test over the specified
transport(s)
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-12-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds support for testing rds rdma over ROCE in test.py
A new -T flag is added, which takes a transport option, tcp or rdma.
A new setup_rdma() function is added that will configure rdma
interfaces and sockets for use in the test case.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-11-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a teardown_tcp() helper that removes net0/net1.
The cmd calls here use fail=False so they can be called from
completed or partially-setup states on error. Also call
teardown_tcp() at the top of setup_tcp() so a previous
interrupted run does not leave net0/net1 lingering and break a
subsequent ip netns add. Register teardown_tcp() with atexit
before setup_tcp() is invoked.
Likewise, we can simpliy stop_pcaps() handling by registering it
with atexit instead of calling it from the signal handler.
atexit handlers run on any exit path - normal completion, raised
exception, and sys.exit() from the timeout signal handler. This
guarantees cleanup are called without further wrapping the test
body in a try/finally blocks.
atexit LIFO ordering keeps stop_pcaps before teardown_tcp so
tcpdumps are killed cleanly before their namespaces go away.
This is a preparatory cleanup for the upcoming ROCE patch which
will also register a teardown_rdma() alongside teardown_tcp()
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-10-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sockets created by child processes in netns_socket may raise
exceptions that are currently not handled by the parent. If for
example a namespace didn't exist or the rds module didn't load. Because
these exceptions occur with in a child thread, the child thread exits,
but the parent does not check the return status.
Further, allowing the child processes to quietly raise exceptions
will cause problems later if the parent registers clean up functions
with atexit. Since the child processes inherit the parents handlers,
they may prematurely call the parents cleanup routines without the
parent being aware.
Fix this by all catching exceptions raised by the child processes.
Child errors surface as a non-zero exit status, which are then
properly raised in the parent process.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-9-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hoist the send/recv logic in test.py into a helper function,
snd_rcv_packets(). This is a preparatory refactoring for the
rds over ROCE series which can use the same function to run
the test over tcp, rdma, or both. No functional changes are
introduced in this patch.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-8-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hoist the verify hashes logic in test.py into a helper function,
verify_hashes(). This is a preparatory refactoring for the rds over
ROCE series that helps modularize the send/recv logic. Breaking up the
logic now will help avoid large function pylint errors later. No
functional changes are introduced in this patch.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-7-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hoist receive packet logic in test.py into a helper function,
recv_burst(). This is a preparatory refactoring for the rds over ROCE
series that helps modularize the send/recv logic. Breaking up the logic
now will help avoid large function pylint errors later. No functional
changes are introduced in this patch.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-6-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hoist the send packet logic in test.py into a helper function,
send_burst(). This is a preparatory refactoring for the rds over ROCE
series that helps modularize the send/recv logic. Breaking up the logic
now will help avoid large function pylint errors later. No functional
changes are introduced in this patch.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-5-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hoist the page info logic in test.py into a helper function,
check_info(). This is a preparatory refactoring for the rds over ROCE
series that helps modularize the send/recv logic. Breaking up the logic
now will help avoid large function pylint errors later. No functional
changes are introduced in this patch.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-4-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hoist the network configs in test.py into a tcp specific helper
function, setup_tcp(). This is a preparatory refactoring for the
rds over ROCE series which will add separate function for rdma
specific configs. No functional changes are introduced in this patch.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-3-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
New rds rdma self tests exposed a hang when tearing down
the ib network configs. This is caused by the shutdown worker
thread sleeping on the wait_event call, which blocks other work
items in the queue. Fix this by changing wait_event to
wait_event timeout, and looping until the wait check succeeds.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-2-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
am65_cpsw_nuss_ndo_slave_add_vid() returns early at the top with:
if (!netif_running(ndev) || !vid)
return 0;
so vid is guaranteed to be non-zero in the rest of the function. The
subsequent
if (!vid)
unreg_mcast = port_mask;
is therefore unreachable. Drop the dead branch.
With that branch gone, unreg_mcast is only ever its initializer value
of zero, so drop the variable and pass 0 directly to
cpsw_ale_vlan_add_modify().
No functional change.
Found by Smatch.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/aS_lhMwppbDHoEcX@stanley.mountain
Signed-off-by: Alexander Vassilevski <oss@vassilevski.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20260517220757.2679458-1-oss@vassilevski.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for configuring swapping of MDI pairs (ABCD->DCBA) when the
property "enet-phy-pair-order" is specified.
Unfortunately, no documentation about this feature is available, but
this implementation still tries to avoid magic numbers and raw register
numbers where it seems clear what is going on.
As it is unknown whether the patching step can be safely reversed, only
enabling MDI swapping is fully supported. A value of "0" for the "enet-
phy-pair-order" property is not accepted if the PHY has already been
patched for MDI swapping (however, this should not occur in practice).
Some other Realtek PHYs also support similar mechanisms:
- RTL8221B-VB-CG allows to configure MDI swapping via the same register,
but does not need the additional patching step. However, it is unclear
whether a driver implementation for that PHY is necessary, as it is
known to support configuration via strapping pins (which is working
fine at least in Zyxel XGS1210-12 rev B1).
- The patching step seems to match the one for the integrated PHYs of
some Realtek PCIe/USB NICs (see for example the r8152 driver).
For now, only implement this for the RTL8226-CG PHY, where it is needed
for the switches Zyxel XGS1010-12 rev A1 and XGS1210-12 rev A1.
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Link: https://patch.msgid.link/20260516190456.387768-1-jan@3e8.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Howells says:
====================
rxrpc: Better fix for DATA/RESPONSE decrypt vs splice()
Here are two patches containing better fixes for the in-place decryption of
DATA and RESPONSE packets that can corrupt pagecache spliced into UDP
packets and sent to an AF_RXRPC server [CVE-2026-43500], plus a patch to
precheck the length of rxgk-secured DATA packets.
Of the main patches, one patch fixes DATA decryption by having recvmsg
unconditionally extract the data into a flat bounce buffer and, if need be,
decrypt it there. It doesn't seem to cause a performance problem to do
this even on unencrypted packets; for encrypted packets it makes sure the
content is correctly aligned for crypto which seems to get a small
performance gain.
Further, it means that DATA packets are no longer copied in the I/O thread,
avoiding a slowdown of the protocol engine that runs there.
The other main patch fixes RESPONSE decryption by having the connection
event handler worker copy the data to a flat buffer and, again, decrypt it
there. This simplifies RESPONSE handling.
With these two fixes, the data content of the received sk_buff no longer
gets altered.
====================
Link: https://patch.msgid.link/20260515230516.2718212-1-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This improves the fix for CVE-2026-43500.
Fix the verification of RESPONSE packets to avoid the problem of
overwriting a RESPONSE packet sent via splice to a local address by
extracting the contents of the UDP packet into a kmalloc'd linear buffer
rather than decrypting the data in place in the sk_buff (which may corrupt
the original buffer).
Fixes: 24481a7f57 ("rxrpc: Fix conn-level packet handling to unshare RESPONSE packets")
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Closes: https://lore.kernel.org/r/afKV2zGR6rrelPC7@v4bel/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: Jiayuan Chen <jiayuan.chen@linux.dev>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://patch.msgid.link/20260515230516.2718212-4-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This improves the fix for CVE-2026-43500.
Fix the pagecache corruption from in-place decryption of a DATA packet
transmitted locally by splice() by getting rid of the packet sharing in the
I/O thread and unconditionally extracting the packet content into a bounce
buffer in which the buffer is decrypted. recvmsg() (or the kernel
equivalent) then copies the data from the bounce buffer to the destination
buffer. The sk_buff then remains unmodified.
This has an additional advantage in that the packet is then arranged in the
buffer with the correct alignment required for the crypto algorithms to
process directly. The performance of the crypto does seem to be a little
faster and, surprisingly, the unencrypted performance doesn't seem to
change much - possibly due to removing complexity from the I/O thread.
Yet another advantage is that the I/O thread doesn't have to copy packets
which would slow down packet distribution, ACK generation, etc..
The buffer belongs to the call and is allocated initially at 2K,
sufficiently large to hold a whole jumbo subpacket, but the buffer will be
increased in size if needed. However, to take this work, MSG_PEEK may
cause a later packet to be decrypted into the buffer, in which case the
earlier one will need re-decrypting for a subsequent recvmsg().
Note that rx_pkt_offset may legitimately see 0 as a valid offset now, so
switch to using USHRT_MAX to indicate an invalid offset.
Note also that I would generally prefer to replace the buffers of the
current sk_buff with a new kmalloc'd buffer of the right size, ditching the
old data and frags as this makes the handling of MSG_PEEK easier and
removes the re-decryption issue, but this looks like quite a complicated
thing to achieve. skb_morph() looks half way to what I want, but I don't
want to have to allocate a new sk_buff.
Fixes: d0d5c0cd1e ("rxrpc: Use skb_unshare() rather than skb_cow_data()")
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Closes: https://lore.kernel.org/r/afKV2zGR6rrelPC7@v4bel/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: Jiayuan Chen <jiayuan.chen@linux.dev>
cc: linux-afs@lists.infradead.org
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://patch.msgid.link/20260515230516.2718212-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change the krb5 crypto library to provide facilities to precheck the length
of the message about to be decrypted or verified.
Fix AF_RXRPC to make use of this to validate DATA packets secured with
RxGK.
Fixes: 9d1d2b5934 ("rxrpc: rxgk: Implement the yfs-rxgk security class (GSSAPI)")
Closes: https://sashiko.dev/#/patchset/20260511160753.607296-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: Simon Horman <horms@kernel.org>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: linux-afs@lists.infradead.org
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://patch.msgid.link/20260515230516.2718212-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
