unpack_pdb() may need to allocate a missing ACCEPT2 table for older policy
data. If that allocation failed, it set an error message but jumped to the
success path, returning a policydb with the required table missing.
Return -ENOMEM through the normal failure path when the ACCEPT2 allocation
fails. Remove the now-unused out label.
Fixes: 2e12c5f060 ("apparmor: add additional flags to extended permission.")
Reviewed-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: Zygmunt Krynicki <me@zygoon.pl>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Return NULL instead of passing to ERR_PTR while error is zero.
Fixes smatch warning:
- security/apparmor/apparmorfs.c:1846 ns_mkdir_op() warn:
passing zero to 'ERR_PTR'
Fixes: 88d5baf690 ("Change inode_operations.mkdir to return struct dentry *")
Reviewed-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Signed-off-by: John Johansen <john.johansen@canonical.com>
When the export_binary parameter is set, then rawdata is available and
there should be a symbolic link for the rawdata in the profile
directory in apparmorfs. If the parameter is unset, then the symlinks
should not exist.
The issue arises when changing the value of export_binary on runtime
and replacing profiles. If export_binary was set when the profile was
originally loaded, then changed to 0 and the profile was reloaded,
then the symbolic links would still exist but would return ENOENT
because the rawdata no longer exists.
On the opposite side, if export_binary was unset when the profile was
originally loaded, then changed to 1 and the profile was reloaded,
then the symbolic links would not exist, even though the rawdata does.
Fixes: d61c57fde8 ("apparmor: make export of raw binary profile to userspace optional")
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
pdb->dfa could be NULL if unpack_dfa fails, causing a NULL pointer
dereference.
Fixes: 2e12c5f060 ("apparmor: add additional flags to extended permission.")
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Currently fn_label_build() callback fns must provide a transition or
failure. Change this so that a callback can indicate it should be
skipped/not be involved in the label being built.
This will be useful when building object labels based on mediation
flags, as to whether the label should be set.
Existing callers can keep treating NULL return as an error because
none of those callback fns support skipping, but instead of the old
error handling replace with AA_BUG.
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Previously fn_label_build() was accepting a NULL which represented
ENOMEM return and ERR_PTR for errors.
Clean this up by requiring the cb fn to return an ERR_PTR or valid
value.
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The function aa_replace_profiles was accessing udata->size after calling
aa_put_loaddata(udata), causing a potential UAF.
Fixed this by saving the size to a local variable before dropping the
reference.
Fixes: 5ac8c355ae ("apparmor: allow introspecting the loaded policy pre internal transform")
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
profiles can be pinned by file and other references, and can live long
after they have been replaced/removed. The rawdata however is no longer
needed, and can be freed earlier than the rest of the profile.
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
There was a race condition involving change_hat and profile replacement in
which replacement of the parent profile during a changehat operation could
result in the list of children becoming empty and the changehat operation
failing. To prevent this:
- grab the namespace lock until we've built the hat transition, and
- use aa_get_newest_profile to avoid using stale profile objects.
Link: https://bugs.launchpad.net/bugs/2139664
Fixes: 89dbf1962a ("apparmor: move change_hat mediation to using labels")
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
rawdata_f_data has a blob of data that is allocated at its end but
not explicitly declared. Makes sure it is correctly declared as a
flex_rray.
Fixes: 63c16c3a76 ("apparmor: Initial implementation of raw policy blob compression")
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The macro is equivalent to OR-ing in the bitflag manually, but using the
macro consistently makes grepping for these occurrences easier.
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Currently, if the `kvzalloc` in `unpack_table` fails, it returns NULL.
This is masked by `aa_dfa_unpack` which interprets NULL as a -EPROTO,
leading to confusing error messages in `apparmor_parser` [1].
The fixed behavior correctly propagates -ENOMEM on allocation failure.
Link: https://gitlab.com/apparmor/apparmor/-/issues/592
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Differential encoding while present has not been made broadly
available, pending further review and testing. Now that has happened
advertise its availability to user space.
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
aa_label_alloc() allocates a secid before allocating or taking the label
proxy. If the later proxy step fails, the error path only freed the label
memory, leaking any resources initialized by aa_label_init().
Use aa_label_free() on the failure path so partially initialized labels
release their secid and other label resources before the backing memory is
freed.
Fixes: f1bd904175 ("apparmor: add the base fns() for domain labels")
Signed-off-by: Zygmunt Krynicki <me@zygoon.pl>
Signed-off-by: John Johansen <john.johansen@canonical.com>
aa_change_profile() builds a replacement label with
fn_label_build_in_scope() before the no_new_privs subset check. The build
helper can fail and return NULL or an ERR_PTR, but the result was passed
to aa_label_is_unconfined_subset() before the existing IS_ERR_OR_NULL()
check.
Reuse the existing target-label build failure handling immediately after
the build. This preserves the current audit handling while preventing the
subset helper from dereferencing an invalid label.
Fixes: e00b02bb6a ("apparmor: move change_profile mediation to using labels")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Some config did this:
security/apparmor/apparmorfs.c:177:28: warning: 'get_loaddata_common_ref' defined but not used [-Wunused-function]
177 | static struct aa_loaddata *get_loaddata_common_ref(struct aa_common_ref *ref)
get_loaddata_common_ref() is only used if
CONFIG_SECURITY_APPARMOR_EXPORT_BINARY=y.
(Or of course move the function into that block if maintainers perfer)
Fixes: 8e135b8aee ("apparmor: fix race between freeing data and fs accessing it")
Cc: John Johansen <john.johansen@canonical.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: John Johansen <john.johansen@canonical.com>
get_newest_label() will always return a refcount, on the profile it
returns. However there are cases where we only need the refcount
if the label is stale and get_newest_label() will return a different
label.
Optimize this by making the get/put happen conditionally, by keeping
a flag indicating if the get was performed and a put is needed.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Currently update_sk_ctx() transfers the plabel reference, unfortunately
it is also unconditionally put in the caller. Ideally we would make
the caller conditionally put the reference based on whether it was
transferred but for now just fix the bug by getting a reference.
Fixes: 88fec3526e ("apparmor: make sure unix socket labeling is correctly updated.")
Signed-off-by: John Johansen <john.johansen@canonical.com>
The holding a reference to the peer_sk is not enough to ensure access
to the peer sk path. Accessing the path outside of the state lock
allows for a race with unix_release_sock(). Fix this by taking the
state lock and getting a reference to the path under lock.
Ideally for connected sockets we would cache this information so we
don't have to take the lock here. But for now just fix the race.
Fixes: bc6e5f6933 ("apparmor: Remove use of the double lock")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Unfortunately the plabel was being shadowed by an unused local var.
This didn't affect the mediation check but did cauase the cache to
not correctly be updated resulting in extra mediation checks.
Fixes: 88fec3526e ("apparmor: make sure unix socket labeling is correctly updated.")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Add support for a second fine-grained UDP access right.
LANDLOCK_ACCESS_NET_CONNECT_SEND_UDP controls the ability to set the
remote port of a socket (via connect()) and to specify an explicit
destination when sending a datagram, to override any remote peer set on
a UDP socket (e.g. in sendto() or sendmsg()). It will be useful for
applications that send datagrams, and for some servers too (those
creating per-client sockets, which want to receive traffic only from a
specific address).
Similarly as for bind(), this access control is performed when
configuring sockets, not in hot code paths.
Add detection of when autobind is about to be required, and deny the
operation if the process would not be allowed to call bind(0)
explicitly. Autobind can only be performed in udp_lib_get_port() from
code paths already controlled by LSM hooks: when connect()ing, sending a
first datagram, and in some splice() EOF edge case which, afaiu, can
only happen after a remote peer has been set. This invariant needs to be
preserved to keep bind policies actually enforced.
Signed-off-by: Matthieu Buffet <matthieu@buffet.re>
Link: https://patch.msgid.link/20260611162107.49278-3-matthieu@buffet.re
[mic: Add quick return for non-sandboxed tasks, fix sa_family
dereferencing, fix comment formatting]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add support for a first fine-grained UDP access right.
LANDLOCK_ACCESS_NET_BIND_UDP controls the ability to set the local port
of a UDP socket (via bind()). It will be useful for servers (to start
receiving datagrams), and for some clients that need to use a specific
source port (e.g. mDNS requires to use port 5353)
For obvious performance concerns, access control is only enforced when
configuring sockets, not when using them for common send/recv
operations.
Bump ABI to allow userspace to detect and use this new right.
Signed-off-by: Matthieu Buffet <matthieu@buffet.re>
Link: https://patch.msgid.link/20260611162107.49278-2-matthieu@buffet.re
[mic: Fix comment formatting]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Socket family is read (twice) in a context where the socket is not
locked, so another thread can setsockopt(IPV6_ADDRFORM) to write it
concurrently. Add needed READ_ONCE() annotation.
Use the proper macro to access __sk_common.skc_family like everywhere
else.
Fixes: fff69fb03d ("landlock: Support network rules with TCP bind and connect")
Signed-off-by: Matthieu Buffet <matthieu@buffet.re>
Link: https://patch.msgid.link/20260609211511.85630-1-matthieu@buffet.re
Link: https://patch.msgid.link/20260609211511.85630-2-matthieu@buffet.re
[mic: Squash two patches, move variable to ease backport, fix comment
formatting]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
LANDLOCK_SCOPE_SIGNAL must prevent a sandboxed process from signaling
processes outside its Landlock domain. It can be bypassed through the
asynchronous SIGIO delivery path.
A sandboxed process that owns any file or socket can arm it with
fcntl(fd, F_SETOWN, -pgid), fcntl(fd, F_SETSIG, SIGKILL) and O_ASYNC, so
that an I/O event makes the kernel deliver the chosen signal to the
whole process group. As the head of its process group's task list (the
default position right after fork()) that group can also hold the
non-sandboxed process that launched it, e.g. a supervisor or a security
monitor. The sandbox can thus kill or signal the processes
LANDLOCK_SCOPE_SIGNAL is meant to protect from it.
The scope is enforced in hook_file_send_sigiotask() against the Landlock
domain recorded at F_SETOWN time, not the live domain of the sender.
control_current_fowner() decides whether to record that domain and skips
recording it when the fowner target is in the caller's thread group,
which is safe only for a single-task target (PIDTYPE_PID, PIDTYPE_TGID).
For a process group (PIDTYPE_PGID) pid_task() returns only one member;
recording is skipped whenever that member shares the caller's thread
group, and hook_file_send_sigiotask() then lets the signal fan out to
the whole group unchecked.
Record the domain for every non single-process target so the scope is
enforced against each group member at delivery time.
That recording is necessary but not sufficient on its own: the kernel
signals a process group through its members' thread-group leaders, and
the leader of the registrant's own process can carry a different
Landlock domain than the sibling thread that armed the owner.
domain_is_scoped() would then deny that leader, even though commit
18eb75f3af ("landlock: Always allow signals between threads of the
same process") requires same-process delivery to be allowed.
hook_task_kill() avoids this by evaluating same_thread_group() live, per
recipient; the SIGIO path instead delegates the whole decision to a
single registration-time check, which a process-group fan-out cannot
honor.
So also record the registrant's thread group next to its domain and
exempt it at delivery: hook_file_send_sigiotask() allows the signal
whenever the recipient belongs to the registrant's own process,
restoring the same-process guarantee while keeping out-of-domain group
members blocked. The direct kill() path (hook_task_kill) already
evaluates the live domain and is unaffected.
Fixes: 18eb75f3af ("landlock: Always allow signals between threads of the same process")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: Günther Noack <gnoack3000@gmail.com>
Link: https://patch.msgid.link/56bffc24f3d0d08b45a686a48e99766b0a0821fa.1780614610.git.hexlabsecurity@proton.me
[mic: Check pid_type earlier and improve comment, fix commit message,
fix comment formatting]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Mark the kzalloc_flex() of struct landlock_details with
GFP_KERNEL_ACCOUNT so the allocation is charged to the calling task,
like the other Landlock per-domain allocations which have used
GFP_KERNEL_ACCOUNT forever.
Every property of landlock_details is caller-attributable: allocated by
landlock_restrict_self(2), owned by the caller's landlock_hierarchy,
contents are the caller's pid, uid, comm, and exe_path, lifetime bounded
by the caller's domain. While the caller may not know nor control the
size of this allocation (i.e. exe_path), this data should still be
accounted for it.
The deciding factor is whether userspace can trigger the allocation, not
whether the size of the data is known nor controlled by the caller.
This aligns with the kmemcg accounting policy established by commit
5d097056c9 ("kmemcg: account certain kmem allocations to memcg").
No new failure modes: the hierarchy and ruleset are allocated before
details and are already accounted, so landlock_restrict_self(2) already
returns -ENOMEM under memcg pressure. This change widens that existing
failure window slightly; it does not introduce a new error code.
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: stable@vger.kernel.org
Fixes: 1d636984e0 ("landlock: Add AUDIT_LANDLOCK_DOMAIN and log domain status")
Link: https://patch.msgid.link/20260513180309.165840-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Set audit_net.sk in current_check_access_socket() to provide the socket
object to audit_log_lsm_data(). This makes Landlock consistent with
AppArmor, which always sets .sk for socket operations, and with
SELinux's generic socket permission checks.
The socket's local and foreign address information (laddr, lport, faddr,
fport) is logged by the shared lsm_audit.c infrastructure when the
socket has bound or connected state. Fields with zero values are
suppressed by print_ipv4_addr()/print_ipv6_addr(), so the audit output
is unchanged for the common case of bind denials on unbound sockets.
For connect denials after a prior bind, the bound local address (laddr,
lport) appears before the existing sockaddr fields (daddr, dest).
No existing fields are removed or reordered, and the new field names
(laddr, lport, faddr, fport) are standard audit fields already emitted
by other LSMs through the same lsm_audit.c code path.
Add a connect_tcp_bound audit test that binds to an allowed port and
then connects to a denied one, verifying that the denial record reports
laddr/lport from the bound socket in addition to the connect
destination.
Cc: Günther Noack <gnoack@google.com>
Cc: Tingmao Wang <m@maowtm.org>
Cc: stable@vger.kernel.org
Fixes: 9f74411a40 ("landlock: Log TCP bind and connect denials")
Link: https://patch.msgid.link/20260612172757.1003481-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
-----BEGIN PGP SIGNATURE-----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=bils
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2026-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2026-06-12
1) Replace the open-coded manual cleanup in xfrm_add_policy() error
path with xfrm_policy_destroy() for consistency with
xfrm_policy_construct().
From Deepanshu Kartikey.
2) Limit XFRMA_TFCPAD to a sensible maximum (max IP length, 64k) since
u32 is excessive for traffic flow confidentiality padding.
From David Ahern.
3) Add a new netlink message XFRM_MSG_MIGRATE_STATE that
allows migrating individual IPsec SAs independently of
their policies. The existing XFRM_MSG_MIGRATE is tightly coupled
to policy+SA migration, lacks SPI for unique SA identification,
and cannot express reqid changes or migrate Transport mode
selectors. The new interface identifies the SA via SPI and mark,
supports reqid changes, address family changes, encap removal,
and uses an atomic create+install flow under x->lock to prevent
SN/IV reuse during AEAD SA migration.
From Antony Antony.
* tag 'ipsec-next-2026-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: add documentation for XFRM_MSG_MIGRATE_STATE
xfrm: restrict netlink attributes for XFRM_MSG_MIGRATE_STATE
xfrm: add XFRM_MSG_MIGRATE_STATE for single SA migration
xfrm: make xfrm_dev_state_add xuo parameter const
xfrm: extract address family and selector validation helpers
xfrm: refactor XFRMA_MTIMER_THRESH validation into a helper
xfrm: move encap and xuo into struct xfrm_migrate
xfrm: add error messages to state migration
xfrm: add state synchronization after migration
xfrm: check family before comparing addresses in migrate
xfrm: split xfrm_state_migrate into create and install functions
xfrm: rename reqid in xfrm_migrate
xfrm: fix NAT-related field inheritance in SA migration
xfrm: allow migration from UDP encapsulated to non-encapsulated ESP
xfrm: add extack to xfrm_init_state
xfrm: remove redundant assignments
xfrm: Reject excessive values for XFRMA_TFCPAD
xfrm: cleanup error path in xfrm_add_policy()
====================
Link: https://patch.msgid.link/20260612074725.1760473-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for sending a value N between 1 and ULONG_MAX to the IMA
original measurement interface. This value represents the number of
measurements that should be deleted from the current measurements list. In
this case, measurements are staged in an internal non-user visible list,
and immediately deleted.
This staging method allows the remote attestation agents to easily separate
the measurements that were verified (staged and deleted) from those that
weren't due to the race between taking a TPM quote and reading the
measurements list.
In order to minimize the locking time of ima_extend_list_mutex, deleting
N records is realized by doing a lockless walk in the current measurements
list to determine the N-th entry to cut, to cut the current measurements
list under the lock, and by deleting the excess records after releasing the
lock.
Flushing the hash table is not supported for N records, since it would
require removing the N records one by one from the hash table under the
ima_extend_list_mutex lock, which would increase the locking time.
Link: https://github.com/linux-integrity/linux/issues/1
Co-developed-by: Steven Chen <chenste@linux.microsoft.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
During staging and delete, measurements are not completely deallocated.
Their entry digest portion is kept and is still reachable with the hash
table to detect duplicate records. If the number of records is significant,
this reduces the memory saving benefit of staging.
Some users might be interested in achieving the best memory saving (the
measurements are completely deallocated) at the cost of having duplicate
records across the staged measurement lists. Duplicate records are still
avoided within the current measurement list.
Introduce the new kernel option ima_flush_htable to decide whether or not
the digests of staged measurement records are flushed from the hash table,
when they are deleted, to achieve the maximum memory saving.
When the option is enabled, replace the old hash table with a new one,
by calling ima_alloc_replace_htable(), and completely delete the
measurements records.
Note: This code derives from the Alt-IMA Huawei project, whose license is
GPL-2.0 OR MIT.
Link: https://github.com/linux-integrity/linux/issues/1
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Introduce the ability of staging the IMA measurement list and deleting them
with a prompt.
Staging means moving the current measurement list records to a separate
location, and allowing users to read and delete it. This causes the current
measurement list to be emptied (since records were moved) and new
measurements to be added on the empty list. Staging can be done only once
at a time. In the event of kexec(), staging is aborted and staged records
will be carried over to the new kernel.
Introduce ascii_runtime_measurements_<algo>_staged and
binary_runtime_measurements_<algo>_staged interfaces to access and delete
the measurements.
Use 'echo A > <IMA _staged interface>' and
'echo D > <IMA _staged interface>' to respectively stage and delete the
entire measurements list. Locking of these interfaces is also mediated with
a call to _ima_measurements_open() and with ima_measurements_release().
Implement the staging functionality by introducing the new global
measurements list ima_measurements_staged, and ima_queue_stage() and
ima_queue_staged_delete_all() to respectively move measurements from the
current measurements list to the staged one, and to move staged
measurements to the ima_measurements_trim list for deletion. Introduce
ima_queue_delete() to delete the measurements.
Staging is forbidden after measurement is suspended, and between staging
and deleting, so that walking the staged and current measurements list can
be done locklessly in ima_dump_measurement_list(). Strict ordering of
suspending and dumping is enforced by two reboot notifiers with different
priority. Refusing to delete staged measurements also signals to user space
that those measurements are already carried over to the secondary kernel,
so that it does not save them twice.
Finally, introduce the BINARY_STAGED and BINARY_FULL binary measurements
list types, to maintain the counters and the binary size of staged
measurements and the full measurements list (including records that were
staged). BINARY still represents the current binary measurements list.
Use the binary size for the BINARY + BINARY_STAGED types in
ima_add_kexec_buffer(), since both measurements list types are copied to
the secondary kernel during kexec. Use BINARY_FULL in
ima_measure_kexec_event(), to generate a critical data record.
It should be noted that the BINARY_FULL counter is not passed through
kexec. Thus, the number of records included in the kexec critical data
records refers to the records since the critical data records generated
from the previous kexec event.
Note: This code derives from the Alt-IMA Huawei project, whose license is
GPL-2.0 OR MIT.
Link: https://github.com/linux-integrity/linux/issues/1
Suggested-by: Gregory Lumen <gregorylumen@linux.microsoft.com> (staging revert)
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Introduce ima_dump_measurement() to simplify the code of
ima_dump_measurement_list() and to avoid repeating the
ima_dump_measurement() code block if iteration occurs on multiple lists.
No functional change: only code moved to a separate function.
Link: https://github.com/linux-integrity/linux/issues/1
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Use the more secure snprintf() function (accepting the buffer size) in
create_securityfs_measurement_lists().
No functional change: sprintf() and snprintf() have the same behavior.
Link: https://github.com/linux-integrity/linux/issues/1
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Introduce the ima_measure_users counter, to implement a semaphore-like
locking scheme where the binary and ASCII measurements list interfaces can
be concurrently opened by multiple readers, or alternatively by a single
writer. In addition, allow the same writer to open the other interfaces for
write or read/write, so that it can see the same measurement state across
all the interfaces.
A semaphore cannot be used because the kernel cannot return to user space
with a lock held.
Introduce the ima_measure_lock() and ima_measure_unlock() primitives, to
respectively lock/unlock the interfaces (safely with the ima_measure_users
counter, without holding a lock).
Finally, introduce _ima_measurements_open() to lock the interface before
seq_open(), and call it from ima_measurements_open() and
ima_ascii_measurements_open(). And, introduce ima_measurements_release(),
to unlock the interface.
Require CAP_SYS_ADMIN if the interface is opened for write (not possible
for the current measurements interfaces, since they only have read
permission).
No functional changes: multiple readers are allowed as before.
Link: https://github.com/linux-integrity/linux/issues/1
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Introduce _ima_measurements_start() and _ima_measurements_next(), renamed
from ima_measurements_start() and ima_measurements_next(), to include the
list head as an additional parameter, so that iteration on different lists
can be implemented by calling those functions.
No functional change: ima_measurements_start() and ima_measurements_next()
pass the ima_measurements list head, used before. They become wrappers for
the new functions.
Link: https://github.com/linux-integrity/linux/issues/1
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Make binary_runtime_size as an array, to have separate counters per binary
measurements list type. Currently, define the BINARY type for the existing
binary measurements list.
Introduce ima_update_binary_runtime_size() to facilitate updating a
binary_runtime_size value with a given binary measurement list type.
Also add the binary measurements list type parameter to
ima_get_binary_runtime_size(), to retrieve the desired value. Retrieving
the value is now done under the ima_extend_list_mutex, since there can be
concurrent updates.
No functional change (except for the mutex usage, that fixes the
concurrency issue): the BINARY array element is equivalent to the old
binary_runtime_size.
Link: https://github.com/linux-integrity/linux/issues/1
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Make ima_num_records as an array, to have separate counters per binary
measurements list type. Currently, define the BINARY type for the existing
binary measurements list.
No functional change: the BINARY type is equivalent to the value without
the array.
Link: https://github.com/linux-integrity/linux/issues/1
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The IMA hash table is a fixed-size array of hlist_head buckets:
struct hlist_head ima_htable[IMA_MEASURE_HTABLE_SIZE];
IMA_MEASURE_HTABLE_SIZE is (1 << IMA_HASH_BITS) = 1024 buckets, each a
struct hlist_head (one pointer, 8 bytes on 64-bit). That is 8 KiB allocated
in BSS for every kernel, regardless of whether IMA is ever used, and
regardless of how many measurements are actually made.
Replace the fixed-size array with a RCU-protected pointer to a dynamically
allocated array that is initialized in ima_init_htable(), which is called
from ima_init() during early boot. ima_init_htable() calls the static
function ima_alloc_replace_htable() which, other than initializing the hash
table the first time, can also hot-swap the existing hash table with a
blank one.
The allocation in ima_alloc_replace_htable() uses kcalloc() so the buckets
are zero-initialised (equivalent to HLIST_HEAD_INIT { .first = NULL }).
Callers of ima_alloc_replace_htable() must call synchronize_rcu() and free
the returned hash table.
Finally, access the hash table with rcu_dereference() in
ima_lookup_digest_entry() (reader side) and with
rcu_dereference_protected() in ima_add_digest_entry() (writer side).
No functional change: bucket count, hash function, and all locking remain
identical.
Link: https://github.com/linux-integrity/linux/issues/1
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The ima_h_table structure is a collection of IMA measurement list
metadata - number of records in the IMA measurement list, number of
integrity violations, and a hash table containing the IMA template data
hash, needed to prevent measurement list record duplication.
Removing records from the measurement list needs to be reflected in the
hash table. As a pre-req to removing records from the measurement list,
separate those counters from the hash table, remove the ima_h_table
structure, and just replace the hash table pointer.
Finally, rename ima_show_htable_value(), ima_show_htable_violations()
and ima_htable_violations_ops respectively to ima_show_counter(),
ima_show_num_violations() and ima_num_violations_ops.
Link: https://github.com/linux-integrity/linux/issues/1
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Add a new netlink method to migrate a single xfrm_state.
Unlike the existing migration mechanism (SA + policy), this
supports migrating only the SA and allows changing the reqid.
The SA is looked up via xfrm_usersa_id, which uniquely
identifies it, so old_saddr is not needed. old_daddr is carried in
xfrm_usersa_id.daddr.
The reqid is invariant in the old migration.
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Revert commit 54067bacb4 ("selinux: hooks: use __getname() to allocate
path buffer") as it improperly assumed that PATH_MAX == PAGE_SIZE
everywhere. Moving away from __get_free_page() is still a good thing and
will be revisited in the future.
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Nicholas Carlini reports that the keyring code calls assoc_array_find()
in find_key_to_update() without holding the RCU read lock, while the
assoc_array_gc() code really is designed around removing the node from
the tree and then freeing it after an RCU grace-period.
The regular key handling doesn't see this because holding the keyring
semaphore hides any lifetime issues, but the persistent key handling
uses a different model.
Instead of extending the keyring locking, just do the simple RCU locking
that the assoc_array was designed for.
Reported-by: Nicholas Carlini <npc@anthropic.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: James Morris James Morris <jmorris@namei.org>
Cc: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
selinux_genfs_get_sid() allocates memory for a path with __get_free_page()
although there is a dedicated helper for allocation of file paths:
__getname().
Replace __get_free_page() for allocation of a path buffer with __getname().
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Several functions in selinuxfs.c allocate temporary buffers using
__get_free_page() or get_zeroed_page().
These buffers are used either to store a string generated by snprintf() (in
sel_make_bools()) or to copy data from user (sel_read_avc_hash_stats() and
sel_read_sidtab_hash_stats()).
Such usage does not require struct page access and it is better to allocate
these buffers with kzalloc()/kmalloc() that provide better scalability and
more debugging possibilities.
Replace use of get_zeroed_page() with kzalloc() and usage of
__get_free_page() with kmalloc().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Now that the minimum supported version of LLVM for building the kernel
has been raised to 17.0.1, the '!X86_32 || !Clang || Clang > 16'
dependency of CONFIG_FORTIFY_SOURCE is always true, so it can be
removed.
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20260517-bump-minimum-supported-llvm-version-to-17-v2-3-b3b8cda46bdd@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Now that the minimum supported version of LLVM for building the kernel
has been raised to 17.0.1, the '!Clang || Clang > 15.0.6' dependency for
CONFIG_CC_HAS_ZERO_CALL_USED_REGS is always true, so it can be removed.
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260517-bump-minimum-supported-llvm-version-to-17-v2-2-b3b8cda46bdd@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
-----BEGIN PGP SIGNATURE-----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=yDvf
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20260519' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm fix from Paul Moore:
"A single LSM patch to add a missing credential mutex lock to the
lsm_set_self_attr(2) syscall so it behaves similar to the associated
procfs API and avoids issues with ptrace"
* tag 'lsm-pr-20260519' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: hold cred_guard_mutex for lsm_set_self_attr()
Just as proc_pid_attr_write() already does before calling the LSM
hook. This only matters for SELinux and AppArmor which check
whether the process is being ptraced and if so, whether to
allow the transition.
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
evm_read_xattrs() allocates size + 1 bytes, fills them from the list of
enabled xattrs, and then passes strlen(temp) to
simple_read_from_buffer(). When no configured xattrs are enabled, the
fill loop stores nothing and temp[0] remains uninitialized, so strlen()
reads beyond initialized memory.
Explicitly terminate the buffer after allocation, use snprintf() for
each formatted line, and pass the accumulated length, without risk of
truncation, to simple_read_from_buffer().
Fixes: fa516b66a1 ("EVM: Allow runtime modification of the set of verified xattrs")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Add support for sigv3 signature verification using ML-DSA in pure mode.
When a sigv3 signature is verified, first check whether the key to use
for verification is an ML-DSA key and therefore uses a hashless signature
verification scheme. The hashless signature verification method uses the
ima_file_id structure directly for signature verification rather than
its digest.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Kamlesh Kumar <kam@juniper.net>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Refactor asymmetric_verify for reusability. Have it call
asymmetric_verify_common with the signature verification key and the
public_key structure as parameters. sigv3 support for ML-DSA will need to
check the public key type first to decide how to do the signature
verification and therefore will have these parameters available for
calling asymmetric_verify_common.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Kamlesh Kumar <kam@juniper.net>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Check that the algo parameter passed to calc_file_id_hash is within valid
range. Do this in asymmetric_verify_v3 since this value will also be passed
to a hashless signature verification function from here.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Kamlesh Kumar <kam@juniper.net>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Check for a NULL pointer returned by asymmetric_key_public_key and return
-ENOKEY in this case.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Kamlesh Kumar <kam@juniper.net>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Similarly to inode_state_read_once(), it makes the caller spell out
they acknowledge instability of the returned value.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://patch.msgid.link/20260421182538.1215894-2-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Validate that the target of AVTAB_TYPE rules and file transitions are
simple types and not attributes.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: merge fuzz, dropped parts due to dependencies]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Validate the types used in bounds checks.
Replace the usage of BUG(), to avoid halting the system on malformed
polices.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: merge fuzz, fixed typo identified by Smalley]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Check that an ID does not refer to a gap in the global array of
definitions.
Constify parameters of isvalid() function and change return type to
bool.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: merge fixes, dropped boolean checks due to missing dependency]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Index as soon as possible to enable isvalid() checks to fail on gaps.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Validate that no types with an invalid too high ID are present in the
attribute map. Gaps are still not checked.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: changed name to ebitmap_get_highest_set_bit()]
Signed-off-by: Paul Moore <paul@paul-moore.com>
In multiple places the binary policy announces how many items of some
kind are to be expected next. Before reading them the kernel already
allocates enough memory for that announced size. Validate that the
remaining input size can actually fit the announced items, to avoid OOM
issues on malformed binary policies.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: manual merge fuzz fixups, style fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Be more strict during parsing of policies and reject invalid values.
Add some error messages in the case of policy parse failures, to
enhance debugging, either on a malformed policy or a too strict check.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: fixed checkpatch.pl warnings, style problems]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Security class identifiers are limited to 2^16, thus use the appropriate
type u16 consistently.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Avoid using nontransitive comparison to prevent unexpected sorting
results due to (well-defined) overflows.
See https://www.qualys.com/2024/01/30/qsort.txt for a related issue in
glibc's qsort(3).
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: use the cmp_int() macro from sort.h]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Currently sel_write_load() takes the policy mutex earlier than
necessary. Move the taking of the mutex later. This avoids
holding it unnecessarily across the vmalloc() and copy_from_user()
of the policy data.
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Currently there can only be a single open of /sys/fs/selinux/policy at
any time. This allows any process to block any other process from
reading the kernel policy. The original motivation seems to have been
a mix of preventing an inconsistent view of the policy size and
preventing userspace from allocating kernel memory without bound, but
this is arguably equally bad. Eliminate the policy_opened flag and
shrink the critical section that the policy mutex is held. While we
are making changes here, drop a couple of extraneous BUG_ONs.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/selinux/20100726193414.19538.64028.stgit@paris.rdu.redhat.com/
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Remove the previously deprecated /sys/fs/selinux/user interface aside
from a residual stub for userspace compatibility.
Commit d7b6918e22 ("selinux: Deprecate /sys/fs/selinux/user") started
the deprecation process for /sys/fs/selinux/user:
The selinuxfs "user" node allows userspace to request a list
of security contexts that can be reached for a given SELinux
user from a given starting context. This was used by libselinux
when various login-style programs requested contexts for
users, but libselinux stopped using it in 2020.
Kernel support will be removed no sooner than Dec 2025.
A pr_warn() message has been in place since Linux v6.13, and a 5
second sleep was introduced since Linux v6.17 to help make it more
noticeable.
We are now past the stated deadline of Dec 2025, so remove the
underlying functionality and replace it with a stub that returns a
'0\0' buffer to avoid breaking userspace. This also avoids a local DoS
from logspam and an uninterruptible sleep delay.
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Commit f22f9aaf6c ("selinux: remove the runtime disable
functionality") removed the underlying SELinux runtime disable
functionality but left everything else intact and started logging an
error message to warn any residual users.
Prune it to just log an error message once and to return count
(i.e. all bytes written successfully) to avoid breaking
userspace. This also fixes a local DoS from logspam.
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
commit a7e4676e8e ("selinux: remove the 'checkreqprot'
functionality") removed the ability to modify the checkreqprot setting
but left everything except the updating of the checkreqprot value
intact. Aside from unnecessary processing, this could produce a local
DoS from log spam and incorrectly calls selinux_ima_measure_state() on
each write even though no state has changed. Prune it to just log an
error message once and return count (i.e. all bytes written
successfully) so that userspace never breaks.
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Update the security_inode_listsecurity() interface to allow
use of the xattr_list_one() helper and update the hook
implementations.
Link: https://lore.kernel.org/selinux/20250424152822.2719-1-stephen.smalley.work@gmail.com
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: forward porting to bring this patch up to v7.1-rc1+]
Signed-off-by: Paul Moore <paul@paul-moore.com>
These were the only two allocations in the policy loading logic
that were not already using kzalloc_objs() for the policy
data structures. Fix these to be consistent with the rest and
to protect against ill-formed policy.
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Fix the order in sel_kill_sb() to match other pseudo filesystems.
This does not currently matter for selinuxfs per se but could
in the future, e.g. with SELinux namespaces and multiple selinuxfs
instances.
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The per-task avdcache was incorrectly saving and reusing the
audited vector computed by avc_audit_required() rather than
recomputing based on the currently requested permissions and
distinguishing the denied versus allowed cases. As a result,
some permission checks were not being audited, e.g.
directory write checks after a previously cached directory
search check.
Cc: stable@vger.kernel.org
Fixes: dde3a5d0f4 ("selinux: move avdcache to per-task security struct")
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: line wrap tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Move lsm_get_xattr_slot() below the SBLABEL_MNT check so we don't leave
a NULL-named slot in the array when returning -EOPNOTSUPP; filesystem
initxattrs() callbacks stop iterating at the first NULL ->name, silently
dropping xattrs installed by later LSMs.
Cc: stable@vger.kernel.org
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
SELinux socket state lives in the composite LSM socket blob.
sock_has_perm() and nlmsg_sock_has_extended_perms() currently
dereference sk->sk_security directly, which assumes the SELinux socket
blob is at offset zero.
In stacked configurations that assumption does not hold. If another LSM
allocates socket blob storage before SELinux, these helpers may read the
wrong blob and feed invalid SID and class values into AVC checks.
Use selinux_sock() instead of accessing sk->sk_security directly.
Fixes: d1d991efaf ("selinux: Add netlink xperm support")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Zongyao Chen <ZongYao.Chen@linux.alibaba.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Drop the length argument and use the simpler QSTR().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Paul Moore <paul@paul-moore.com>
During early boot, the filesystem is read-only and any changes
to xattrs are not allowed. This fails in case of ext4 because
changing xattr starts an ext4 transaction which fails with the
following warning.
WARNING: fs/ext4/ext4_jbd2.c:75 at ext4_journal_check_start+0x63/0xa0 [ext4], CPU#1: systemd-sysroot/561
CPU: 1 UID: 0 PID: 561 Comm: systemd-sysroot Not tainted 6.19.12-1-default #1 PREEMPT(voluntary) openSUSE Tumbleweed c2dfc3c9d9f6f1233251c5d4410574fe82a348ee
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:ext4_journal_check_start+0x63/0xa0 [ext4]
Call Trace:
__ext4_journal_start_sb+0x3e/0x180 [ext4 6d025f3bc52c89a957b89a89d211fadf5e9434e1]
ext4_xattr_set+0x104/0x150 [ext4 6d025f3bc52c89a957b89a89d211fadf5e9434e1]
__vfs_setxattr+0x9a/0xd0
__vfs_setxattr_noperm+0x76/0x1f0
ima_appraise_measurement+0x23e/0xe40
ima_d_path+0x5a/0xd0
process_measurement+0xb29/0xc40
? copy_from_kernel_nofault+0x21/0xe0
? fscrypt_file_open+0xc0/0xe0
? ext4_file_open+0x60/0x490 [ext4 6d025f3bc52c89a957b89a89d211fadf5e9434e1]
? bpf_prog_31efb7c56239148b_restrict_filesystems+0xab/0x126
? __bpf_prog_exit+0x23/0xd0
? __bpf_tramp_exit+0xd/0x50
? bpf_trampoline_6442530367+0x9f/0xea
ima_file_check+0x57/0x80
security_file_post_open+0x50/0xf0
path_openat+0x493/0x1650
do_filp_open+0xc7/0x170
Detect the state of the file early and return the error.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
ima_get_hash_algo() only recognizes version 2 signatures when the xattr
type is EVM_IMA_XATTR_DIGSIG. Since sigv3 signatures also use
EVM_IMA_XATTR_DIGSIG as the xattr type, version 3 must be accepted as
well to correctly determine the hash algorithm.
Additionally, ima_validate_rule() does not include IMA_SIGV3_REQUIRED in
the allowed flags bitmask for MODULE_CHECK, KEXEC_KERNEL_CHECK, and
KEXEC_INITRAMFS_CHECK hook functions. As a result, policy rules with
"appraise_type=sigv3" are rejected for these functions.
Add version 3 to the accepted versions in ima_get_hash_algo() for
EVM_IMA_XATTR_DIGSIG, and add IMA_SIGV3_REQUIRED to the allowed flags
for MODULE_CHECK, KEXEC_KERNEL_CHECK, and KEXEC_INITRAMFS_CHECK in
ima_validate_rule().
Signed-off-by: Kamlesh Kumar <kam@juniper.net>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Fixes: de4c44a7f5 ("ima: add support to require IMA sigv3 signatures")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
- Use sysfs_emit in param_get_{audit,mode}
- Remove redundant if check in sk_peer_get_label
- Replace memcpy + NUL termination with kmemdup_nul in do_setattr
+ Bug Fixes
- Fix aa_dfa_unpack's error handling in aa_setup_dfa_engine
- Fix string overrun due to missing termination
- Fix wrong dentry in RENAME_EXCHANGE uid check
- fix unpack_tags to properly return error in failure cases
- fix dfa size check
- return error on namespace mismatch in verify_header
- use target task's context in apparmor_getprocattr()
-----BEGIN PGP SIGNATURE-----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=OOib
-----END PGP SIGNATURE-----
Merge tag 'apparmor-pr-2026-04-23' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"Cleanups
- Use sysfs_emit in param_get_{audit,mode}
- Remove redundant if check in sk_peer_get_label
- Replace memcpy + NUL termination with kmemdup_nul in do_setattr
Bug Fixes:
- Fix aa_dfa_unpack's error handling in aa_setup_dfa_engine
- Fix string overrun due to missing termination
- Fix wrong dentry in RENAME_EXCHANGE uid check
- fix unpack_tags to properly return error in failure cases
- fix dfa size check
- return error on namespace mismatch in verify_header
- use target task's context in apparmor_getprocattr()"
* tag 'apparmor-pr-2026-04-23' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor/lsm: Fix aa_dfa_unpack's error handling in aa_setup_dfa_engine
apparmor: Fix string overrun due to missing termination
apparmor: Fix wrong dentry in RENAME_EXCHANGE uid check
apparmor: fix unpack_tags to properly return error in failure cases
apparmor: fix dfa size check
apparmor: Use sysfs_emit in param_get_{audit,mode}
apparmor: Remove redundant if check in sk_peer_get_label
apparmor: Replace memcpy + NUL termination with kmemdup_nul in do_setattr
apparmor: return error on namespace mismatch in verify_header
apparmor: use target task's context in apparmor_getprocattr()
aa_dfa_unpack returns ERR_PTR not NULL when it fails, but aa_put_dfa
only checks NULL for its input, which would cause invalid memory access
in aa_put_dfa. Set nulldfa to NULL explicitly to fix that.
Fixes: 98b824ff89 ("apparmor: refcount the pdb")
Signed-off-by: GONG Ruiqi <gongruiqi1@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
When booting Ubuntu 26.04 with Linux 7.0-rc4 on an ARM64 Qualcomm
Snapdragon X1 we see a string buffer overrun:
BUG: KASAN: slab-out-of-bounds in aa_dfa_match (security/apparmor/match.c:535)
Read of size 1 at addr ffff0008901cc000 by task snap-update-ns/2120
CPU: 5 UID: 60578 PID: 2120 Comm: snap-update-ns Not tainted 7.0.0-rc4+ #22 PREEMPTLAZY
Hardware name: LENOVO 83ED/LNVNB161216, BIOS NHCN60WW 09/11/2025
Call trace:
show_stack (arch/arm64/kernel/stacktrace.c:501) (C)
dump_stack_lvl (lib/dump_stack.c:122)
print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:597)
__asan_report_load1_noabort (mm/kasan/report_generic.c:378)
aa_dfa_match (security/apparmor/match.c:535)
match_mnt_path_str (security/apparmor/mount.c:244 security/apparmor/mount.c:336)
match_mnt (security/apparmor/mount.c:371)
aa_bind_mount (security/apparmor/mount.c:447 (discriminator 4))
apparmor_sb_mount (security/apparmor/lsm.c:719 (discriminator 1))
security_sb_mount (security/security.c:1062 (discriminator 31))
path_mount (fs/namespace.c:4101)
__arm64_sys_mount (fs/namespace.c:4172 fs/namespace.c:4361 fs/namespace.c:4338 fs/namespace.c:4338)
invoke_syscall.constprop.0 (arch/arm64/kernel/syscall.c:35 arch/arm64/kernel/syscall.c:49)
el0_svc_common.constprop.0 (./include/linux/thread_info.h:142 (discriminator 2) arch/arm64/kernel/syscall.c:140 (discriminator 2))
do_el0_svc (arch/arm64/kernel/syscall.c:152)
el0_svc (arch/arm64/kernel/entry-common.c:80 arch/arm64/kernel/entry-common.c:725)
el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:744)
el0t_64_sync (arch/arm64/kernel/entry.S:596)
Allocated by task 2120:
kasan_save_stack (mm/kasan/common.c:58)
kasan_save_track (./arch/arm64/include/asm/current.h:19 mm/kasan/common.c:70 mm/kasan/common.c:79)
kasan_save_alloc_info (mm/kasan/generic.c:571)
__kasan_kmalloc (mm/kasan/common.c:419)
__kmalloc_noprof (./include/linux/kasan.h:263 mm/slub.c:5260 mm/slub.c:5272)
aa_get_buffer (security/apparmor/lsm.c:2201)
aa_bind_mount (security/apparmor/mount.c:442)
apparmor_sb_mount (security/apparmor/lsm.c:719 (discriminator 1))
security_sb_mount (security/security.c:1062 (discriminator 31))
path_mount (fs/namespace.c:4101)
__arm64_sys_mount (fs/namespace.c:4172 fs/namespace.c:4361 fs/namespace.c:4338 fs/namespace.c:4338)
invoke_syscall.constprop.0 (arch/arm64/kernel/syscall.c:35 arch/arm64/kernel/syscall.c:49)
el0_svc_common.constprop.0 (./include/linux/thread_info.h:142 (discriminator 2) arch/arm64/kernel/syscall.c:140 (discriminator 2))
do_el0_svc (arch/arm64/kernel/syscall.c:152)
el0_svc (arch/arm64/kernel/entry-common.c:80 arch/arm64/kernel/entry-common.c:725)
el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:744)
el0t_64_sync (arch/arm64/kernel/entry.S:596)
The buggy address belongs to the object at ffff0008901ca000
which belongs to the cache kmalloc-rnd-06-8k of size 8192
The buggy address is located 0 bytes to the right of
allocated 8192-byte region [ffff0008901ca000, ffff0008901cc000)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9101c8
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:-1 pincount:0
flags: 0x8000000000000040(head|zone=2)
page_type: f5(slab)
raw: 8000000000000040 ffff000800016c40 fffffdffe2d14e10 ffff000800015c70
raw: 0000000000000000 0000000800010001 00000000f5000000 0000000000000000
head: 8000000000000040 ffff000800016c40 fffffdffe2d14e10 ffff000800015c70
head: 0000000000000000 0000000800010001 00000000f5000000 0000000000000000
head: 8000000000000003 fffffdffe2407201 fffffdffffffffff 00000000ffffffff
head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000008
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff0008901cbf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff0008901cbf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff0008901cc000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff0008901cc080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff0008901cc100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
This was introduced by previous incorrect conversion from strcpy(). Fix it
by adding the missing terminator.
Cc: stable@vger.kernel.org
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: Daniel J Blueman <daniel@quora.org>
Fixes: 93d4dbdc8d ("apparmor: Replace deprecated strcpy in d_namespace_path")
Signed-off-by: John Johansen <john.johansen@canonical.com>
In apparmor_path_rename(), when handling RENAME_EXCHANGE, the
cond_exchange structure is supposed to carry the attributes of the
*new* dentry (since it is used to authorize moving new_dentry to the
old location). However, line 412 reads:
vfsuid = i_uid_into_vfsuid(idmap, d_backing_inode(old_dentry));
This fetches the uid of old_dentry instead of new_dentry. As a result,
the RENAME_EXCHANGE permission check uses the wrong file owner, which
can allow a rename that should be denied (if old_dentry's owner has
more privileges) or deny one that should be allowed.
Note that cond_exchange.mode on the line above correctly uses
new_dentry. Only the uid lookup is wrong.
Fix by changing old_dentry to new_dentry in the i_uid_into_vfsuid call.
Fixes: 5e26a01e56 ("apparmor: use type safe idmapping helpers")
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: Dudu Lu <phx0fer@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
error is initialized to -EPROTO but set by some of the internal
functions, unfortunately the last two checks assume error is set to
-EPROTO already for the failure case. Ensure it is by setting it
before these checks.
Fixes: 3d28e2397a ("apparmor: add support loading per permission tagging")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
AppArmor dfas need a minimum of two states to be valid. State 0 is the
default trap state, and State 1 the default start state. When verifying
the dfa ensure that this is the case.
Fixes: c27c6bd2c4 ("apparmor: ensure that dfa state tables have entries")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Replace sprintf() with sysfs_emit() in param_get_audit() and
param_get_mode(). sysfs_emit() is preferred for formatting sysfs output
because it provides safer bounds checking. Add terminating newlines as
suggested by checkpatch.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Remove the redundant if check in sk_peer_get_label() and return
ERR_PTR(-ENOPROTOOPT) directly.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Use kmemdup_nul() to copy 'value' instead of using memcpy() followed by
a manual NUL termination. No functional changes.
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: John Johansen <john.johansen@canonical.com>
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCad/SPRQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5TDuAQCT+OttUlEqKfGLUrmXjsqw+BdgSm59
vOwTUfY0uIjAsgEAzFY8bOt5WWud9bpfEE3iarKIZQI0RidSHylyaB4FRg8=
=6soG
-----END PGP SIGNATURE-----
Merge tag 'integrity-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"There are two main changes, one feature removal, some code cleanup,
and a number of bug fixes.
Main changes:
- Detecting secure boot mode was limited to IMA. Make detecting
secure boot mode accessible to EVM and other LSMs
- IMA sigv3 support was limited to fsverity. Add IMA sigv3 support
for IMA regular file hashes and EVM portable signatures
Remove:
- Remove IMA support for asychronous hash calculation originally
added for hardware acceleration
Cleanup:
- Remove unnecessary Kconfig CONFIG_MODULE_SIG and CONFIG_KEXEC_SIG
tests
- Add descriptions of the IMA atomic flags
Bug fixes:
- Like IMA, properly limit EVM "fix" mode
- Define and call evm_fix_hmac() to update security.evm
- Fallback to using i_version to detect file change for filesystems
that do not support STATX_CHANGE_COOKIE
- Address missing kernel support for configured (new) TPM hash
algorithms
- Add missing crypto_shash_final() return value"
* tag 'integrity-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
evm: Enforce signatures version 3 with new EVM policy 'bit 3'
integrity: Allow sigv3 verification on EVM_XATTR_PORTABLE_DIGSIG
ima: add support to require IMA sigv3 signatures
ima: add regular file data hash signature version 3 support
ima: Define asymmetric_verify_v3() to verify IMA sigv3 signatures
ima: remove buggy support for asynchronous hashes
integrity: Eliminate weak definition of arch_get_secureboot()
ima: Add code comments to explain IMA iint cache atomic_flags
ima_fs: Correctly create securityfs files for unsupported hash algos
ima: check return value of crypto_shash_final() in boot aggregate
ima: Define and use a digest_size field in the ima_algo_desc structure
powerpc/ima: Drop unnecessary check for CONFIG_MODULE_SIG
ima: efi: Drop unnecessary check for CONFIG_MODULE_SIG/CONFIG_KEXEC_SIG
ima: fallback to using i_version to detect file change
evm: fix security.evm for a file with IMA signature
s390: Drop unnecessary CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT
evm: Don't enable fix mode when secure boot is enabled
integrity: Make arch_ima_get_secureboot integrity-wide
Everything:
Total patches: 368
Reviews/patch: 1.56
Reviewed rate: 74%
Excluding DAMON:
Total patches: 316
Reviews/patch: 1.77
Reviewed rate: 81%
Excluding DAMON and zram:
Total patches: 306
Reviews/patch: 1.81
Reviewed rate: 82%
Excluding DAMON, zram and maple_tree:
Total patches: 276
Reviews/patch: 2.01
Reviewed rate: 91%
Significant patch series in this merge:
- The 30 patch series "maple_tree: Replace big node with maple copy"
from Liam Howlett is mainly prepararatory work for ongoing development
but it does reduce stack usage and is an improvement.
- The 12 patch series "mm, swap: swap table phase III: remove swap_map"
from Kairui Song offers memory savings by removing the static swap_map.
It also yields some CPU savings and implements several cleanups.
- The 2 patch series "mm: memfd_luo: preserve file seals" from Pratyush
Yadav adds file seal preservation to LUO's memfd code.
- The 2 patch series "mm: zswap: add per-memcg stat for incompressible
pages" from Jiayuan Chen adds additional userspace stats reportng to
zswap.
- The 4 patch series "arch, mm: consolidate empty_zero_page" from Mike
Rapoport implements some cleanups for our handling of ZERO_PAGE() and
zero_pfn.
- The 2 patch series "mm/kmemleak: Improve scan_should_stop()
implementation" from Zhongqiu Han provides an robustness improvement and
some cleanups in the kmemleak code.
- The 4 patch series "Improve khugepaged scan logic" from Vernon Yang
"improves the khugepaged scan logic and reduces CPU consumption by
prioritizing scanning tasks that access memory frequently".
- The 2 patch series "Make KHO Stateless" from Jason Miu simplifies
Kexec Handover by "transitioning KHO from an xarray-based metadata
tracking system with serialization to a radix tree data structure that
can be passed directly to the next kernel"
- The 3 patch series "mm: vmscan: add PID and cgroup ID to vmscan
tracepoints" from Thomas Ballasi and Steven Rostedt enhances vmscan's
tracepointing.
- The 5 patch series "mm: arch/shstk: Common shadow stack mapping helper
and VM_NOHUGEPAGE" from Catalin Marinas is a cleanup for the shadow
stack code: remove per-arch code in favour of a generic implementation.
- The 2 patch series "Fix KASAN support for KHO restored vmalloc
regions" from Pasha Tatashin fixes a WARN() which can be emitted the KHO
restores a vmalloc area.
- The 4 patch series "mm: Remove stray references to pagevec" from Tal
Zussman provides several cleanups, mainly udpating references to "struct
pagevec", which became folio_batch three years ago.
- The 17 patch series "mm: Eliminate fake head pages from vmemmap
optimization" from Kiryl Shutsemau simplifies the HugeTLB vmemmap
optimization (HVO) by changing how tail pages encode their relationship
to the head page.
- The 2 patch series "mm/damon/core: improve DAMOS quota efficiency for
core layer filters" from SeongJae Park improves two problematic
behaviors of DAMOS that makes it less efficient when core layer filters
are used.
- The 3 patch series "mm/damon: strictly respect min_nr_regions" from
SeongJae Park improves DAMON usability by extending the treatment of the
min_nr_regions user-settable parameter.
- The 3 patch series "mm/page_alloc: pcp locking cleanup" from Vlastimil
Babka is a proper fix for a previously hotfixed SMP=n issue. Code
simplifications and cleanups ennsed.
- The 16 patch series "mm: cleanups around unmapping / zapping" from
David Hildenbrand implements "a bunch of cleanups around unmapping and
zapping. Mostly simplifications, code movements, documentation and
renaming of zapping functions".
- The 6 patch series "support batched checking of the young flag for
MGLRU" from Baolin Wang supports batched checking of the young flag for
MGLRU. It's part cleanups; one benchmark shows large performance
benefits for arm64.
- The 5 patch series "memcg: obj stock and slab stat caching cleanups"
from Johannes Weiner provides memcg cleanup and robustness improvements.
- The 5 patch series "Allow order zero pages in page reporting" from
Yuvraj Sakshith enhances page_reporting's free page reporting - it is
presently and undesirably order-0 pages when reporting free memory.
- The 6 patch series "mm: vma flag tweaks" from Lorenzo Stoakes is
cleanup work following from the recent conversion of the VMA flags to a
bitmap.
- The 10 patch series "mm/damon: add optional debugging-purpose sanity
checks" from SeongJae Park adds some more developer-facing debug checks
into DAMON core.
- The 2 patch series "mm/damon: test and document power-of-2
min_region_sz requirement" from SeongJae Park adds an additional DAMON
kunit test and makes some adjustments to the addr_unit parameter
handling.
- The 3 patch series "mm/damon/core: make passed_sample_intervals
comparisons overflow-safe" from SeongJae Park fixes a hard-to-hit time
overflow issue in DAMON core.
- The 7 patch series "mm/damon: improve/fixup/update ratio calculation,
test and documentation" from SeongJae Park is a "batch of misc/minor
improvements and fixups" for DAMON.
- The 4 patch series "mm: move vma_(kernel|mmu)_pagesize() out of
hugetlb.c" from David Hildenbrand fixes a possible issue with dax-device
when CONFIG_HUGETLB=n. Some code movement was required.
- The 6 patch series "zram: recompression cleanups and tweaks" from
Sergey Senozhatsky provides "a somewhat random mix of fixups,
recompression cleanups and improvements" in the zram code.
- The 11 patch series "mm/damon: support multiple goal-based quota
tuning algorithms" from SeongJae Park extend DAMOS quotas goal
auto-tuning to support multiple tuning algorithms that users can select.
- The 4 patch series "mm: thp: reduce unnecessary
start_stop_khugepaged()" from Breno Leitao fixes the khugpaged sysfs
handling so we no longer spam the logs with reams of junk when
starting/stopping khugepaged.
- The 3 patch series "mm: improve map count checks" from Lorenzo Stoakes
provides some cleanups and slight fixes in the mremap, mmap and vma
code.
- The 5 patch series "mm/damon: support addr_unit on default monitoring
targets for modules" from SeongJae Park extends the use of DAMON core's
addr_unit tunable.
- The 5 patch series "mm: khugepaged cleanups and mTHP prerequisites"
from Nico Pache provides cleanups in the khugepaged and is a base for
Nico's planned khugepaged mTHP support.
- The 15 patch series "mm: memory hot(un)plug and SPARSEMEM cleanups"
from David Hildenbrand implements code movement and cleanups in the
memhotplug and sparsemem code.
- The 2 patch series "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and
cleanup CONFIG_MIGRATION" from David Hildenbrand rationalizes some
memhotplug Kconfig support.
- The 6 patch series "change young flag check functions to return bool"
from Baolin Wang is "a cleanup patchset to change all young flag check
functions to return bool".
- The 3 patch series "mm/damon/sysfs: fix memory leak and NULL
dereference issues" from Josh Law and SeongJae Park fixes a few
potential DAMON bugs.
- The 25 patch series "mm/vma: convert vm_flags_t to vma_flags_t in vma
code" from "converts a lot of the existing use of the legacy vm_flags_t
data type to the new vma_flags_t type which replaces it". Mainly in the
vma code.
- The 21 patch series "mm: expand mmap_prepare functionality and usage"
from Lorenzo Stoakes "expands the mmap_prepare functionality, which is
intended to replace the deprecated f_op->mmap hook which has been the
source of bugs and security issues for some time". Cleanups,
documentation, extension of mmap_prepare into filesystem drivers.
- The 13 patch series "mm/huge_memory: refactor zap_huge_pmd()" from
Lorenzo Stoakes simplifies and cleans up zap_huge_pmd(). Additional
cleanups around vm_normal_folio_pmd() and the softleaf functionality are
performed.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCad3HDQAKCRDdBJ7gKXxA
jrUQAPwNhPk5nPSxnyxjAeQtOBHqgCdnICeEismLajPKd9aYRgEA0s2XAu3tSUYi
GrBnWImHG3s4ePQxVcPCegWTsOUrXgQ=
=1Q7o
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "maple_tree: Replace big node with maple copy" (Liam Howlett)
Mainly prepararatory work for ongoing development but it does reduce
stack usage and is an improvement.
- "mm, swap: swap table phase III: remove swap_map" (Kairui Song)
Offers memory savings by removing the static swap_map. It also yields
some CPU savings and implements several cleanups.
- "mm: memfd_luo: preserve file seals" (Pratyush Yadav)
File seal preservation to LUO's memfd code
- "mm: zswap: add per-memcg stat for incompressible pages" (Jiayuan
Chen)
Additional userspace stats reportng to zswap
- "arch, mm: consolidate empty_zero_page" (Mike Rapoport)
Some cleanups for our handling of ZERO_PAGE() and zero_pfn
- "mm/kmemleak: Improve scan_should_stop() implementation" (Zhongqiu
Han)
A robustness improvement and some cleanups in the kmemleak code
- "Improve khugepaged scan logic" (Vernon Yang)
Improve khugepaged scan logic and reduce CPU consumption by
prioritizing scanning tasks that access memory frequently
- "Make KHO Stateless" (Jason Miu)
Simplify Kexec Handover by transitioning KHO from an xarray-based
metadata tracking system with serialization to a radix tree data
structure that can be passed directly to the next kernel
- "mm: vmscan: add PID and cgroup ID to vmscan tracepoints" (Thomas
Ballasi and Steven Rostedt)
Enhance vmscan's tracepointing
- "mm: arch/shstk: Common shadow stack mapping helper and
VM_NOHUGEPAGE" (Catalin Marinas)
Cleanup for the shadow stack code: remove per-arch code in favour of
a generic implementation
- "Fix KASAN support for KHO restored vmalloc regions" (Pasha Tatashin)
Fix a WARN() which can be emitted the KHO restores a vmalloc area
- "mm: Remove stray references to pagevec" (Tal Zussman)
Several cleanups, mainly udpating references to "struct pagevec",
which became folio_batch three years ago
- "mm: Eliminate fake head pages from vmemmap optimization" (Kiryl
Shutsemau)
Simplify the HugeTLB vmemmap optimization (HVO) by changing how tail
pages encode their relationship to the head page
- "mm/damon/core: improve DAMOS quota efficiency for core layer
filters" (SeongJae Park)
Improve two problematic behaviors of DAMOS that makes it less
efficient when core layer filters are used
- "mm/damon: strictly respect min_nr_regions" (SeongJae Park)
Improve DAMON usability by extending the treatment of the
min_nr_regions user-settable parameter
- "mm/page_alloc: pcp locking cleanup" (Vlastimil Babka)
The proper fix for a previously hotfixed SMP=n issue. Code
simplifications and cleanups ensued
- "mm: cleanups around unmapping / zapping" (David Hildenbrand)
A bunch of cleanups around unmapping and zapping. Mostly
simplifications, code movements, documentation and renaming of
zapping functions
- "support batched checking of the young flag for MGLRU" (Baolin Wang)
Batched checking of the young flag for MGLRU. It's part cleanups; one
benchmark shows large performance benefits for arm64
- "memcg: obj stock and slab stat caching cleanups" (Johannes Weiner)
memcg cleanup and robustness improvements
- "Allow order zero pages in page reporting" (Yuvraj Sakshith)
Enhance free page reporting - it is presently and undesirably order-0
pages when reporting free memory.
- "mm: vma flag tweaks" (Lorenzo Stoakes)
Cleanup work following from the recent conversion of the VMA flags to
a bitmap
- "mm/damon: add optional debugging-purpose sanity checks" (SeongJae
Park)
Add some more developer-facing debug checks into DAMON core
- "mm/damon: test and document power-of-2 min_region_sz requirement"
(SeongJae Park)
An additional DAMON kunit test and makes some adjustments to the
addr_unit parameter handling
- "mm/damon/core: make passed_sample_intervals comparisons
overflow-safe" (SeongJae Park)
Fix a hard-to-hit time overflow issue in DAMON core
- "mm/damon: improve/fixup/update ratio calculation, test and
documentation" (SeongJae Park)
A batch of misc/minor improvements and fixups for DAMON
- "mm: move vma_(kernel|mmu)_pagesize() out of hugetlb.c" (David
Hildenbrand)
Fix a possible issue with dax-device when CONFIG_HUGETLB=n. Some code
movement was required.
- "zram: recompression cleanups and tweaks" (Sergey Senozhatsky)
A somewhat random mix of fixups, recompression cleanups and
improvements in the zram code
- "mm/damon: support multiple goal-based quota tuning algorithms"
(SeongJae Park)
Extend DAMOS quotas goal auto-tuning to support multiple tuning
algorithms that users can select
- "mm: thp: reduce unnecessary start_stop_khugepaged()" (Breno Leitao)
Fix the khugpaged sysfs handling so we no longer spam the logs with
reams of junk when starting/stopping khugepaged
- "mm: improve map count checks" (Lorenzo Stoakes)
Provide some cleanups and slight fixes in the mremap, mmap and vma
code
- "mm/damon: support addr_unit on default monitoring targets for
modules" (SeongJae Park)
Extend the use of DAMON core's addr_unit tunable
- "mm: khugepaged cleanups and mTHP prerequisites" (Nico Pache)
Cleanups to khugepaged and is a base for Nico's planned khugepaged
mTHP support
- "mm: memory hot(un)plug and SPARSEMEM cleanups" (David Hildenbrand)
Code movement and cleanups in the memhotplug and sparsemem code
- "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and cleanup
CONFIG_MIGRATION" (David Hildenbrand)
Rationalize some memhotplug Kconfig support
- "change young flag check functions to return bool" (Baolin Wang)
Cleanups to change all young flag check functions to return bool
- "mm/damon/sysfs: fix memory leak and NULL dereference issues" (Josh
Law and SeongJae Park)
Fix a few potential DAMON bugs
- "mm/vma: convert vm_flags_t to vma_flags_t in vma code" (Lorenzo
Stoakes)
Convert a lot of the existing use of the legacy vm_flags_t data type
to the new vma_flags_t type which replaces it. Mainly in the vma
code.
- "mm: expand mmap_prepare functionality and usage" (Lorenzo Stoakes)
Expand the mmap_prepare functionality, which is intended to replace
the deprecated f_op->mmap hook which has been the source of bugs and
security issues for some time. Cleanups, documentation, extension of
mmap_prepare into filesystem drivers
- "mm/huge_memory: refactor zap_huge_pmd()" (Lorenzo Stoakes)
Simplify and clean up zap_huge_pmd(). Additional cleanups around
vm_normal_folio_pmd() and the softleaf functionality are performed.
* tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm: fix deferred split queue races during migration
mm/khugepaged: fix issue with tracking lock
mm/huge_memory: add and use has_deposited_pgtable()
mm/huge_memory: add and use normal_or_softleaf_folio_pmd()
mm: add softleaf_is_valid_pmd_entry(), pmd_to_softleaf_folio()
mm/huge_memory: separate out the folio part of zap_huge_pmd()
mm/huge_memory: use mm instead of tlb->mm
mm/huge_memory: remove unnecessary sanity checks
mm/huge_memory: deduplicate zap deposited table call
mm/huge_memory: remove unnecessary VM_BUG_ON_PAGE()
mm/huge_memory: add a common exit path to zap_huge_pmd()
mm/huge_memory: handle buggy PMD entry in zap_huge_pmd()
mm/huge_memory: have zap_huge_pmd return a boolean, add kdoc
mm/huge: avoid big else branch in zap_huge_pmd()
mm/huge_memory: simplify vma_is_specal_huge()
mm: on remap assert that input range within the proposed VMA
mm: add mmap_action_map_kernel_pages[_full]()
uio: replace deprecated mmap hook with mmap_prepare in uio_info
drivers: hv: vmbus: replace deprecated mmap hook with mmap_prepare
mm: allow handling of stacked mmap_prepare hooks in more drivers
...
Core & protocols
----------------
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP.
- Number of code moves to help the compiler with inlining.
Avoid output arguments for returning drop reason where possible.
- Rework drop handling within qdiscs to include more metadata
about the reason and dropping qdisc in the tracepoints.
- Remove the rtnl_lock use from IP Multicast Routing.
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two.
- Report TCP delayed ack timer information via socket diag.
- Add ip_local_port_step_width sysctl to allow distributing the randomly
selected ports more evenly throughout the allowed space.
- Add support for per-route tunsrc in IPv6 segment routing.
- Start work of switching sockopt handling to iov_iter.
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up.
- Support MSG_EOR in MPTCP.
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage.
- Remove UDP-Lite support (as announced in 2023).
- Remove support for building IPv6 as a module.
Remove the now unnecessary function calling indirection.
Cross-tree stuff
----------------
- Move Michael MIC code from generic crypto into wireless,
it's considered insecure but some WiFi networks still need it.
Netfilter
---------
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate.
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex.
- Add more opinionated input validation to lower security exposure.
- Make IPVS hash tables to be per-netns and resizable.
Wireless
--------
- Finished assoc frame encryption/EPPKE/802.1X-over-auth.
- Radar detection improvements.
- Add 6 GHz incumbent signal detection APIs.
- Multi-link support for FILS, probe response templates and
client probing.
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware.
Driver API
----------
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs.
- Add standard counters for reporting pause storm events
(implement in mlx5 and fbnic).
- Add configuration API for completion writeback buffering
(implement in mana).
- Support driver-initiated change of RSS context sizes.
- Support DPLL monitoring input frequency (implement in zl3073x).
- Support per-port resources in devlink (implement in mlx5).
Misc
----
- Expand the YAML spec for Netfilter.
Drivers
-------
- Software:
- macvlan: support multicast rx for bridge ports with shared source
MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EhQZ
-----END PGP SIGNATURE-----
Merge tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
Wireless:
- Finished assoc frame encryption/EPPKE/802.1X-over-auth
- Radar detection improvements
- Add 6 GHz incumbent signal detection APIs
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
Kernel symbol flags:
- Replace the separate *_gpl symbol sections (__ksymtab_gpl and
__kcrctab_gpl) with a unified symbol table and a new
__kflagstab section. This section stores symbol flags, such as
the GPL-only flag, as an 8-bit bitset for each exported symbol.
This is a cleanup that simplifies symbol lookup in the module
loader by avoiding table fragmentation and will allow a cleaner
way to add more flags later if needed.
Module signature UAPI:
- Move struct module_signature to the UAPI headers to allow reuse
by tools outside the kernel proper, such as kmod and
scripts/sign-file. This also renames a few constants for clarity
and drops unused signature types as preparation for hash-based
module integrity checking work that's in progress.
Sysfs:
- Add a /sys/module/<module>/import_ns sysfs attribute to show
the symbol namespaces imported by loaded modules. This makes it
easier to verify driver API access at runtime on systems that
care about such things (e.g. Android).
Cleanups and fixes:
- Force sh_addr to 0 for all sections in module.lds. This prevents
non-zero section addresses when linking modules with ld.bfd -r,
which confused elfutils.
- Fix a memory leak of charp module parameters on module unload
when the kernel is configured with CONFIG_SYSFS=n.
- Override the -EEXIST error code returned by module_init() to
userspace. This prevents confusion with the errno reserved by
the module loader to indicate that a module is already loaded.
- Simplify the warning message and drop the stack dump on positive
returns from module_init().
- Drop unnecessary extern keywords from function declarations and
synchronize parse_args() arguments with their implementation.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSE9au1u/dCZerzchhaByWrOaGnegUCadmI0gAKCRBaByWrOaGn
euC6AQCpeQGQv/Z1Pu9DmBRaRD1MjXg1K1J8DN3qH7L8FbWDwAD9FtzAHw9GPOOP
0aQpDvcYKjdrU8OiuqtENvhzCV1RTA4=
=YaHp
-----END PGP SIGNATURE-----
Merge tag 'modules-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull module updates from Sami Tolvanen:
"Kernel symbol flags:
- Replace the separate *_gpl symbol sections (__ksymtab_gpl and
__kcrctab_gpl) with a unified symbol table and a new __kflagstab
section.
This section stores symbol flags, such as the GPL-only flag, as an
8-bit bitset for each exported symbol. This is a cleanup that
simplifies symbol lookup in the module loader by avoiding table
fragmentation and will allow a cleaner way to add more flags later
if needed.
Module signature UAPI:
- Move struct module_signature to the UAPI headers to allow reuse by
tools outside the kernel proper, such as kmod and
scripts/sign-file.
This also renames a few constants for clarity and drops unused
signature types as preparation for hash-based module integrity
checking work that's in progress.
Sysfs:
- Add a /sys/module/<module>/import_ns sysfs attribute to show the
symbol namespaces imported by loaded modules.
This makes it easier to verify driver API access at runtime on
systems that care about such things (e.g. Android).
Cleanups and fixes:
- Force sh_addr to 0 for all sections in module.lds. This prevents
non-zero section addresses when linking modules with 'ld.bfd -r',
which confused elfutils.
- Fix a memory leak of charp module parameters on module unload when
the kernel is configured with CONFIG_SYSFS=n.
- Override the -EEXIST error code returned by module_init() to
userspace. This prevents confusion with the errno reserved by the
module loader to indicate that a module is already loaded.
- Simplify the warning message and drop the stack dump on positive
returns from module_init().
- Drop unnecessary extern keywords from function declarations and
synchronize parse_args() arguments with their implementation"
* tag 'modules-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux: (23 commits)
module: Simplify warning on positive returns from module_init()
module: Override -EEXIST module return
documentation: remove references to *_gpl sections
module: remove *_gpl sections from vmlinux and modules
module: deprecate usage of *_gpl sections in module loader
module: use kflagstab instead of *_gpl sections
module: populate kflagstab in modpost
module: add kflagstab section to vmlinux and modules
module: define ksym_flags enumeration to represent kernel symbol flags
selftests/bpf: verify_pkcs7_sig: Use 'struct module_signature' from the UAPI headers
sign-file: use 'struct module_signature' from the UAPI headers
tools uapi headers: add linux/module_signature.h
module: Move 'struct module_signature' to UAPI
module: Give MODULE_SIG_STRING a more descriptive name
module: Give 'enum pkey_id_type' a more specific name
module: Drop unused signature types
extract-cert: drop unused definition of PKEY_ID_PKCS7
docs: symbol-namespaces: mention sysfs attribute
module: expose imported namespaces via sysfs
module: Remove extern keyword from param prototypes
...
TOMOYO is treating numeric fields (including inode->i_ino) as "unsigned
long". Now that commit 0b2600f81c ("treewide: change inode->i_ino from
unsigned long to u64") went upstream, update affected portions in TOMOYO.
While an administrator might write a rule that compares inode->i_ino with
an immediate value, this patch changes type of variable for inode->i_ino
to "u64" but does not change type of variable for the corresponding
immediate value to "u64" due to the following reasons.
It is likely that rules that compare inode->i_ino are for testing whether
the directories involved in e.g. rename() operation are the same (i.e.
comparison between two inode->i_ino values rather than one inode->i_ino
value and one immediate value).
It unlikely makes sense to compare inode->i_ino with an immediate value
larger than UINT_MAX.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
- Migrate more hash algorithms from the traditional crypto subsystem
to lib/crypto/.
Like the algorithms migrated earlier (e.g. SHA-*), this simplifies
the implementations, improves performance, enables further
simplifications in calling code, and solves various other issues:
- AES CBC-based MACs (AES-CMAC, AES-XCBC-MAC, and AES-CBC-MAC)
- Support these algorithms in lib/crypto/ using the AES
library and the existing arm64 assembly code
- Reimplement the traditional crypto API's "cmac(aes)",
"xcbc(aes)", and "cbcmac(aes)" on top of the library
- Convert mac80211 to use the AES-CMAC library. Note: several
other subsystems can use it too and will be converted later
- Drop the broken, nonstandard, and likely unused support for
"xcbc(aes)" with key lengths other than 128 bits
- Enable optimizations by default
- GHASH
- Migrate the standalone GHASH code into lib/crypto/
- Integrate the GHASH code more closely with the very similar
POLYVAL code, and improve the generic GHASH implementation
to resist cache-timing attacks and use much less memory
- Reimplement the AES-GCM library and the "gcm" crypto_aead
template on top of the GHASH library. Remove "ghash" from
the crypto_shash API, as it's no longer needed
- Enable optimizations by default
- SM3
- Migrate the kernel's existing SM3 code into lib/crypto/, and
reimplement the traditional crypto API's "sm3" on top of it
- I don't recommend using SM3, but this cleanup is worthwhile
to organize the code the same way as other algorithms
- Testing improvements
- Add a KUnit test suite for each of the new library APIs
- Migrate the existing ChaCha20Poly1305 test to KUnit
- Make the KUnit all_tests.config enable all crypto library tests
- Move the test kconfig options to the Runtime Testing menu
- Other updates to arch-optimized crypto code
- Optimize SHA-256 for Zhaoxin CPUs using the Padlock Hash Engine
- Remove some MD5 implementations that are no longer worth keeping
- Drop big endian and voluntary preemption support from the arm64
code, as those configurations are no longer supported on arm64
- Make jitterentropy and samples/tsm-mr use the crypto library APIs
Note: the overall diffstat is neutral, but when the test code is
excluded it is significantly negative:
Tests: 13 files changed, 1982 insertions(+), 888 deletions(-)
Non-test: 141 files changed, 2897 insertions(+), 3987 deletions(-)
All: 154 files changed, 4879 insertions(+), 4875 deletions(-)
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCadWPyxQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK8QCAQD0i98miI1mu01RKuEwrBzmn7L/2sUH
ReYV/dFDtnN0GwD+KMCiNAM2XTVLRKq5t3OxPHpKZ4y+gZwRowAJeFA02Q8=
=5rip
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
- Migrate more hash algorithms from the traditional crypto subsystem to
lib/crypto/
Like the algorithms migrated earlier (e.g. SHA-*), this simplifies
the implementations, improves performance, enables further
simplifications in calling code, and solves various other issues:
- AES CBC-based MACs (AES-CMAC, AES-XCBC-MAC, and AES-CBC-MAC)
- Support these algorithms in lib/crypto/ using the AES library
and the existing arm64 assembly code
- Reimplement the traditional crypto API's "cmac(aes)",
"xcbc(aes)", and "cbcmac(aes)" on top of the library
- Convert mac80211 to use the AES-CMAC library. Note: several
other subsystems can use it too and will be converted later
- Drop the broken, nonstandard, and likely unused support for
"xcbc(aes)" with key lengths other than 128 bits
- Enable optimizations by default
- GHASH
- Migrate the standalone GHASH code into lib/crypto/
- Integrate the GHASH code more closely with the very similar
POLYVAL code, and improve the generic GHASH implementation to
resist cache-timing attacks and use much less memory
- Reimplement the AES-GCM library and the "gcm" crypto_aead
template on top of the GHASH library. Remove "ghash" from the
crypto_shash API, as it's no longer needed
- Enable optimizations by default
- SM3
- Migrate the kernel's existing SM3 code into lib/crypto/, and
reimplement the traditional crypto API's "sm3" on top of it
- I don't recommend using SM3, but this cleanup is worthwhile
to organize the code the same way as other algorithms
- Testing improvements:
- Add a KUnit test suite for each of the new library APIs
- Migrate the existing ChaCha20Poly1305 test to KUnit
- Make the KUnit all_tests.config enable all crypto library tests
- Move the test kconfig options to the Runtime Testing menu
- Other updates to arch-optimized crypto code:
- Optimize SHA-256 for Zhaoxin CPUs using the Padlock Hash Engine
- Remove some MD5 implementations that are no longer worth keeping
- Drop big endian and voluntary preemption support from the arm64
code, as those configurations are no longer supported on arm64
- Make jitterentropy and samples/tsm-mr use the crypto library APIs
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (66 commits)
lib/crypto: arm64: Assume a little-endian kernel
arm64: fpsimd: Remove obsolete cond_yield macro
lib/crypto: arm64/sha3: Remove obsolete chunking logic
lib/crypto: arm64/sha512: Remove obsolete chunking logic
lib/crypto: arm64/sha256: Remove obsolete chunking logic
lib/crypto: arm64/sha1: Remove obsolete chunking logic
lib/crypto: arm64/poly1305: Remove obsolete chunking logic
lib/crypto: arm64/gf128hash: Remove obsolete chunking logic
lib/crypto: arm64/chacha: Remove obsolete chunking logic
lib/crypto: arm64/aes: Remove obsolete chunking logic
lib/crypto: Include <crypto/utils.h> instead of <crypto/algapi.h>
lib/crypto: aesgcm: Don't disable IRQs during AES block encryption
lib/crypto: aescfb: Don't disable IRQs during AES block encryption
lib/crypto: tests: Migrate ChaCha20Poly1305 self-test to KUnit
lib/crypto: sparc: Drop optimized MD5 code
lib/crypto: mips: Drop optimized MD5 code
lib: Move crypto library tests to Runtime Testing menu
crypto: sm3 - Remove 'struct sm3_state'
crypto: sm3 - Remove the original "sm3_block_generic()"
crypto: sm3 - Remove sm3_base.h
...
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCadfgCxAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSl5cA/0QZjJ+4V2DVzJQM5qzmNK9He9uYaOs7F2Ks
xRvg7IebAPwMEcVY+CVQxD+YGj08UgM753yx4CRbhsu4k5mowEEJDQ==
=Lz9R
-----END PGP SIGNATURE-----
Merge tag 'landlock-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull Landlock update from Mickaël Salaün:
"This adds a new Landlock access right for pathname UNIX domain sockets
thanks to a new LSM hook, and a few fixes"
* tag 'landlock-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: (23 commits)
landlock: Document fallocate(2) as another truncation corner case
landlock: Document FS access right for pathname UNIX sockets
selftests/landlock: Simplify ruleset creation and enforcement in fs_test
selftests/landlock: Check that coredump sockets stay unrestricted
selftests/landlock: Audit test for LANDLOCK_ACCESS_FS_RESOLVE_UNIX
selftests/landlock: Test LANDLOCK_ACCESS_FS_RESOLVE_UNIX
selftests/landlock: Replace access_fs_16 with ACCESS_ALL in fs_test
samples/landlock: Add support for named UNIX domain socket restrictions
landlock: Clarify BUILD_BUG_ON check in scoping logic
landlock: Control pathname UNIX domain socket resolution by path
landlock: Use mem_is_zero() in is_layer_masks_allowed()
lsm: Add LSM hook security_unix_find
landlock: Fix kernel-doc warning for pointer-to-array parameters
landlock: Fix formatting in tsync.c
landlock: Improve kernel-doc "Return:" section consistency
landlock: Add missing kernel-doc "Return:" sections
selftests/landlock: Fix format warning for __u64 in net_test
selftests/landlock: Skip stale records in audit_match_record()
selftests/landlock: Drain stale audit records on init
selftests/landlock: Fix socket file descriptor leaks in audit helpers
...
-----BEGIN PGP SIGNATURE-----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=HzM1
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20260410' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux update from Paul Moore:
- Annotate a known race condition to soothe KCSAN
* tag 'selinux-pr-20260410' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: annotate intentional data race in inode_doinit_with_dentry()
-----BEGIN PGP SIGNATURE-----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=giHS
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20260410' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull LSM updates from Paul Moore:
"We only have five patches in the LSM tree, but three of the five are
for an important bugfix relating to overlayfs and the mmap() and
mprotect() access controls for LSMs. Highlights below:
- Fix problems with the mmap() and mprotect() LSM hooks on overlayfs
As we are dealing with problems both in mmap() and mprotect() there
are essentially two components to this fix, spread across three
patches with all marked for stable.
The simplest portion of the fix is the creation of a new LSM hook,
security_mmap_backing_file(), that is used to enforce LSM mmap()
access controls on backing files in the stacked/overlayfs case. The
existing security_mmap_file() does not have visibility past the
user file. You can see from the associated SELinux hook callback
the code is fairly straightforward.
The mprotect() fix is a bit more complicated as there is no way in
the mprotect() code path to inspect both the user and backing
files, and bolting on a second file reference to vm_area_struct
wasn't really an option.
The solution taken here adds a LSM security blob and associated
hooks to the backing_file struct that LSMs can use to capture and
store relevant information from the user file. While the necessary
SELinux information is relatively small, a single u32, I expect
other LSMs to require more than that, and a dedicated backing_file
LSM blob provides a storage mechanism without negatively impacting
other filesystems.
I want to note that other LSMs beyond SELinux have been involved in
the discussion of the fixes presented here and they are working on
their own related changes using these new hooks, but due to other
issues those patches will be coming at a later date.
- Use kstrdup_const()/kfree_const() for securityfs symlink targets
- Resolve a handful of kernel-doc warnings in cred.h"
* tag 'lsm-pr-20260410' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
selinux: fix overlayfs mmap() and mprotect() access checks
lsm: add backing_file LSM hooks
fs: prepare for adding LSM blob to backing_file
securityfs: use kstrdup_const() to manage symlink targets
cred: fix kernel-doc warnings in cred.h
Please consider pulling these changes from the signed vfs-7.1-rc1.kino tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCadjZCgAKCRCRxhvAZXjc
otmnAP4sbsxZQdz2TG2hJuOwnEZOkkxZQOUMc3ERVyZaWXIeTAEA7e5M+8FpoG9n
8ipO76UoaXdGLESrqVdp9EOhLqOW7QY=
=uMeJ
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.1-rc1.kino' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs i_ino updates from Christian Brauner:
"For historical reasons, the inode->i_ino field is an unsigned long,
which means that it's 32 bits on 32 bit architectures. This has caused
a number of filesystems to implement hacks to hash a 64-bit identifier
into a 32-bit field, and deprives us of a universal identifier field
for an inode.
This changes the inode->i_ino field from an unsigned long to a u64.
This shouldn't make any material difference on 64-bit hosts, but
32-bit hosts will see struct inode grow by at least 4 bytes. This
could have effects on slabcache sizes and field alignment.
The bulk of the changes are to format strings and tracepoints, since
the kernel itself doesn't care that much about the i_ino field. The
first patch changes some vfs function arguments, so check that one out
carefully.
With this change, we may be able to shrink some inode structures. For
instance, struct nfs_inode has a fileid field that holds the 64-bit
inode number. With this set of changes, that field could be
eliminated. I'd rather leave that sort of cleanups for later just to
keep this simple"
* tag 'vfs-7.1-rc1.kino' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nilfs2: fix 64-bit division operations in nilfs_bmap_find_target_in_group()
EVM: add comment describing why ino field is still unsigned long
vfs: remove externs from fs.h on functions modified by i_ino widening
treewide: fix missed i_ino format specifier conversions
ext4: fix signed format specifier in ext4_load_inode trace event
treewide: change inode->i_ino from unsigned long to u64
nilfs2: widen trace event i_ino fields to u64
f2fs: widen trace event i_ino fields to u64
ext4: widen trace event i_ino fields to u64
zonefs: widen trace event i_ino fields to u64
hugetlbfs: widen trace event i_ino fields to u64
ext2: widen trace event i_ino fields to u64
cachefiles: widen trace event i_ino fields to u64
vfs: widen trace event i_ino fields to u64
net: change sock.sk_ino and sock_i_ino() to u64
audit: widen ino fields to u64
vfs: widen inode hash/lookup functions to u64
Please consider pulling these changes from the signed vfs-7.1-rc1.directory tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCadjZCgAKCRCRxhvAZXjc
oj2yAQDHLWMfxDr8INpBuGc09tqX04qyb7td3U+zfM5c3bvLLAD/eDFSSUvzLtPD
u540EWvTaJBV5ALUx3vQK96PPvS6Vg4=
=20jQ
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.1-rc1.directory' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs directory updates from Christian Brauner:
"Recently 'start_creating', 'start_removing', 'start_renaming' and
related interfaces were added which combine the locking and the
lookup.
At that time many callers were changed to use the new interfaces.
However there are still an assortment of places out side of the core
vfs where the directory is locked explictly, whether with inode_lock()
or lock_rename() or similar. These were missed in the first pass for
an assortment of uninteresting reasons.
This addresses the remaining places where explicit locking is used,
and changes them to use the new interfaces, or otherwise removes the
explicit locking.
The biggest changes are in overlayfs. The other changes are quite
simple, though maybe the cachefiles changes is the least simple of
those"
* tag 'vfs-7.1-rc1.directory' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
VFS: unexport lock_rename(), lock_rename_child(), unlock_rename()
ovl: remove ovl_lock_rename_workdir()
ovl: use is_subdir() for testing if one thing is a subdir of another
ovl: change ovl_create_real() to get a new lock when re-opening created file.
ovl: pass name buffer to ovl_start_creating_temp()
cachefiles: change cachefiles_bury_object to use start_renaming_dentry()
ovl: Simplify ovl_lookup_real_one()
VFS: make lookup_one_qstr_excl() static.
nfsd: switch purge_old() to use start_removing_noperm()
selinux: Use simple_start_creating() / simple_done_creating()
Apparmor: Use simple_start_creating() / simple_done_creating()
libfs: change simple_done_creating() to use end_creating()
VFS: move the start_dirop() kerndoc comment to before start_dirop()
fs/proc: Don't lock root inode when creating "self" and "thread-self"
VFS: note error returns in documentation for various lookup functions
