The comment on top of `struct damon_region` clearly says that
For any use case, @ar should be non-zero positive size.
which is now verified in damon_verify_new_region() if the kernel is built
with DAMON_DEBUG_SANITY.
The WARN_ONCE() can be triggered if the mtier sample module is enabled
before node{0,1}_{start,end}_addr have been properly initialized, which is
obviously not good.
------------[ cut here ]------------
start 0 >= end 0
WARNING: mm/damon/core.c:217 at damon_new_region+0xf4/0x118, CPU#59: bash/341468
Call trace:
damon_new_region+0xf4/0x118 (P)
damon_set_regions+0xfc/0x3c0
damon_sample_mtier_build_ctx+0xe8/0x3a8
damon_sample_mtier_start+0x1c/0x90
damon_sample_mtier_enable_store+0x98/0xb0
param_attr_store+0xb4/0x128
module_attr_store+0x2c/0x50
sysfs_kf_write+0x58/0x90
kernfs_fop_write_iter+0x16c/0x238
vfs_write+0x2c0/0x370
ksys_write+0x74/0x118
__arm64_sys_write+0x24/0x38
invoke_syscall+0xa8/0x118
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x54/0x370
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1ac/0x1b0
---[ end trace 0000000000000000 ]---
Note that the same issue can happen if detect_node_addresses is true, and
node 0 or 1 is memoryless. Fix it together by checking the validity of
parameters right before damon_new_region() and fail early if they're
invalid.
Link: https://lore.kernel.org/20260629144432.133962-1-sj@kernel.org
Fixes: 82a08bde3c ("samples/damon: implement a DAMON module for memory tiering")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: SJ Park <sj@kernel.org>
Reviewed-by: SJ Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.16.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mtier DAMON sample module and DAMON virtual address operation set (vaddr)
unit tests are using damon_add_region() for setup of DAMON monitoring
target region boundaries setup. But, damon_set_regions() is designed for
exactly the purpose. All other DAMON API callers use the function for the
purpose. Replace damon_add_region() usage in mtier sample module with
damon_set_regions(), for unifying the use case and reducing the
maintenance cost.
Link: https://lore.kernel.org/20260522154026.80546-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_sample_mtier is assuming DAMON is ready to use in module_init time,
and uses its own hack to see if it is the time. Use damon_initialized(),
which is a way for seeing if DAMON is ready to be used that is more
reliable and better to maintain instead of the hack.
Link: https://lkml.kernel.org/r/20250916033511.116366-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 964314344e ("samples/damon/mtier: support boot time enable
setup") is somehow incompletely applying the origin patch [1]. It is
missing the part that avoids starting DAMON before module initialization.
Probably a mistake during a merge has happened. Fix it by applying the
missed part again.
Link: https://lkml.kernel.org/r/20250909022238.2989-4-sj@kernel.org
Link: https://lore.kernel.org/20250706193207.39810-4-sj@kernel.org [1]
Fixes: 964314344e ("samples/damon/mtier: support boot time enable setup")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch adds a new knob `detect_node_addresses`, which determines
whether the physical address range is set manually using the existing
knobs or automatically by the mtier module. When `detect_node_addresses`
set to 'Y', mtier automatically converts node0 and node1 to their physical
addresses. If set to 'N', it uses the existing 'node#_start_addr' and
'node#_end_addr' to define regions as before.
Link: https://lkml.kernel.org/r/20250707235919.513-1-yunjeong.mun@sk.com
Signed-off-by: Yunjeong Mun <yunjeong.mun@sk.com>
Suggested-by: Honggyu Kim <honggyu.kim@sk.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The damon_{lru_sort,reclaim,stat} kernel modules use "enabled" parameter
knobs as follows.
/sys/module/damon_lru_sort/parameters/enabled
/sys/module/damon_reclaim/parameters/enabled
/sys/module/damon_stat/parameters/enabled
However, other sample modules of damon use "enable" parameter knobs so
it'd be better to rename them from "enable" to "enabled" to keep the
consistency with other damon modules.
Before:
/sys/module/damon_sample_wsse/parameters/enable
/sys/module/damon_sample_prcl/parameters/enable
/sys/module/damon_sample_mtier/parameters/enable
After:
/sys/module/damon_sample_wsse/parameters/enabled
/sys/module/damon_sample_prcl/parameters/enabled
/sys/module/damon_sample_mtier/parameters/enabled
There is no functional changes in this patch.
Link: https://lkml.kernel.org/r/20250707024548.1964-1-honggyu.kim@sk.com
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON sample module, mtier has its name 'mtier'. It could conflict with
future modules, and not very easy to identify it by name. Use a prefix,
"damon_sample_" for the name.
Note that this could break users if they depend on the old name. But it
is just a sample, so no such usage is expected, or known. Even if such
usage exists, updating it for the new name should be straightforward.
Link: https://lkml.kernel.org/r/20250705175000.56259-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If 'enable' parameter of the 'mtier' DAMON sample module is set at boot
time via the kernel command line, memory allocation is tried before the
slab is initialized. As a result kernel NULL pointer dereference BUG can
happen. Fix it by checking the initialization status.
Link: https://lkml.kernel.org/r/20250706193207.39810-4-sj@kernel.org
Fixes: 82a08bde3c ("samples/damon: implement a DAMON module for memory tiering")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Change the hard-coded quota goal metric values into sysfs knobs:
`node0_mem_used_bp` and `node0_mem_free_bp`. These knobs represent the
used and free memory ratio of node0 in basis points (bp, where 1 bp =
0.01%). As mentioned in [1], this patch is developed under the assumption
that node0 is always the fast-tier in a two-tiers memory setup.
[1] https://lore.kernel.org/linux-mm/20250420194030.75838-8-sj@kernel.org/
Link: https://lkml.kernel.org/r/20250627163329.50997-1-sj@kernel.org
Link: https://patch.msgid.link/20250619050313.1535-1-yunjeong.mun@sk.com
Signed-off-by: Yunjeong Mun <yunjeong.mun@sk.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Suggested-by: Honggyu Kim <honggyu.kim@sk.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The damon_sample_mtier_start() can fail so we must reset the "enable"
parameter to "false" again for proper rollback.
In such cases, setting Y to "enable" then N triggers the similar crash
with mtier because damon sample start failed but the "enable" stays as Y.
Link: https://lkml.kernel.org/r/20250702000205.1921-4-honggyu.kim@sk.com
Fixes: 82a08bde3c ("samples/damon: implement a DAMON module for memory tiering")
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement a sample DAMON module that shows how self-tuned DAMON-based
memory tiering can be written. It is a sample since the purpose is to
give an idea about how it can be implemented and perform, rather than be
used on general production setups. Especially, it supports only two tiers
memory setup having only one CPU-attached NUMA node.
[sj@kernel.org: fix wrong DAMON attrs setting]
Link: https://lkml.kernel.org/r/20250510220932.47722-1-sj@kernel.org
[sj@kernel.org: trigger build even if only mtier is enabled]
Link: https://lkml.kernel.org/r/20250426184054.11437-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20250420194030.75838-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Yunjeong Mun <yunjeong.mun@sk.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
