cfg80211_is_element_inherited() reads the first data octet of the
candidate element (id = elem->data[0]) to look it up in an extension
non-inheritance list. It does so after testing elem->id, but without
verifying that the element actually has a data octet. A zero-length
extension element (WLAN_EID_EXTENSION with length 0) therefore makes it
read one octet past the end of the element.
_ieee802_11_parse_elems_full() runs this check for every element of a
frame once a non-inheritance context exists -- e.g. while parsing a
per-STA profile of a Multi-Link element in a (re)association response,
or a non-transmitted BSS profile -- so a crafted frame from an AP can
trigger a one-octet slab-out-of-bounds read during element parsing:
BUG: KASAN: slab-out-of-bounds in cfg80211_is_element_inherited
Read of size 1 ... in net/wireless/scan.c
Return early (treat the element as inherited) when an extension element
carries no data, mirroring the existing handling of empty ID lists.
The bug was found by fuzzing ieee802_11_parse_elems_full() under KASAN.
Fixes: f7dacfb114 ("cfg80211: support non-inheritance element")
Signed-off-by: HE WEI (ギカク) <skyexpoc@gmail.com>
Link: https://patch.msgid.link/20260707094828.16465-1-skyexpoc@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211_inform_bss_frame_data() parses S1G beacons with the extension
frame layout, but still reads the TSF from the regular probe response
layout after the S1G branch. For S1G beacons that reads bytes at the
regular management-frame timestamp offset instead of the S1G timestamp.
Use the 32-bit S1G beacon timestamp and the S1G Beacon Compatibility
element's TSF completion field when informing an S1G BSS. Keep the
regular management-frame timestamp read in the non-S1G branch.
Fixes: 9eaffe5078 ("cfg80211: convert S1G beacon to scan results")
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Tested-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Reviewed-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260611161943.91069-6-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211_gen_new_ie() copies ML probe response elements from
the parent frame when the parent EHT multi-link element has an
MLD ID matching the nontransmitted BSSID index.
The code only checked that the extension element had more than
one byte before calling ieee80211_mle_get_mld_id(). That helper
assumes a BASIC MLE with enough common info and documents that
callers must first use ieee80211_mle_type_ok().
Attack chain:
malicious AP sends a short EHT MLE in an MBSSID beacon.
cfg80211_inform_bss_frame_data() stores the copied IE buffer.
cfg80211_parse_mbssid_data() builds the nontransmitted BSS IE.
cfg80211_gen_new_ie() sees the EHT MLE in the parent frame.
ieee80211_mle_get_mld_id() then reads past the IE boundary.
Validate the MLE type and size before reading the MLD ID. This
matches the contract required by the MLE helper and rejects the
short element before any internal MLE fields are accessed.
Cc: stable@vger.kernel.org
Fixes: 61dcfa8c2a ("wifi: cfg80211: copy multi-link element from the multi-link probe request's frame body to the generated elements")
Signed-off-by: Haofeng Li <lihaofeng@kylinos.cn>
Link: https://patch.msgid.link/20260701093327.2680709-1-lihaofeng@kylinos.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A previous commit changed mac80211 to no longer make wrong
calls to cfg80211_defragment_element() with the element
pointing outside of the buffer. Additionally, harden this
function itself against that and always return -EINVAL in
case the element isn't inside the source buffer.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://patch.msgid.link/20260529102644.198945754054.I5ae8fdebf9008abc6e15d0b0f10c3a7b73d02eab@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
rdev->int_scan_req is leaked if cfg80211_scan() fails. Note that it's
supposed to be released at ___cfg80211_scan_done() but this doesn't happen
as rdev->scan_req is NULL at that point, too, leading to the early return
from the freeing function.
unreferenced object 0xffff8881161d0800 (size 512):
comm "wpa_supplicant", pid 379, jiffies 4294749765
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 f0 81 13 16 81 88 ff ff ................
backtrace (crc c867fdb6):
kmemleak_alloc+0x89/0x90
__kmalloc_noprof+0x2fd/0x410
cfg80211_scan+0x133/0x730
nl80211_trigger_scan+0xc69/0x1cc0
genl_family_rcv_msg_doit+0x204/0x2f0
genl_rcv_msg+0x431/0x6b0
netlink_rcv_skb+0x143/0x3f0
genl_rcv+0x27/0x40
netlink_unicast+0x4f6/0x820
netlink_sendmsg+0x797/0xce0
__sock_sendmsg+0xc4/0x160
____sys_sendmsg+0x5e4/0x890
___sys_sendmsg+0xf8/0x180
__sys_sendmsg+0x136/0x1e0
__x64_sys_sendmsg+0x76/0xc0
x64_sys_call+0x13f0/0x17d0
Found by Linux Verification Center (linuxtesting.org).
Fixes: c8cb5b854b ("nl80211/cfg80211: support 6 GHz scanning")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20260601094157.92703-1-pchelkin@ispras.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211_merge_profile() reassembles a Multi-BSSID non-transmitted BSS
profile that has been split across multiple consecutive MBSSID elements.
Its while-loop calls
cfg80211_get_profile_continuation(ie, ielen, mbssid_elem, sub_elem)
but never advances mbssid_elem or sub_elem inside the body. Each
iteration therefore searches for a continuation that follows the same
fixed pair; the helper returns the same next_mbssid; and the same
next_sub bytes are memcpy()'d into merged_ie at a growing offset until
the buffer fills.
Advance both mbssid_elem and sub_elem to the just-consumed continuation
so the next call to cfg80211_get_profile_continuation() searches for a
further continuation beyond it (or returns NULL when none exists).
A specially-crafted malicious beacon can take advantage of this bug
to cause the kernel to spend an excessive amount of time in
cfg80211_merge_profile (up to as much as 2ms per beacon received),
which could theoretically be abused in some way.
Cc: stable@vger.kernel.org
Fixes: fe806e4992 ("cfg80211: support profile split between elements")
Signed-off-by: John Walker <johnwalker0@gmail.com>
Link: https://patch.msgid.link/20260507230720.64783-1-johnwalker0@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Userspace may fail to connect to certain BSS that were initially
marked as unusable due to regulatory restrictions (use_for = 0,
e.g., 6 GHz power type mismatch). Even after these restrictions
are removed and the BSS becomes usable, connection attempts still
fail.
The issue occurs in cfg80211_update_known_bss() where the use_for
flag is updated using bitwise AND (&=) instead of direct assignment.
Once a BSS is marked with use_for = 0, the AND operation masks out
any subsequent non-zero values, permanently keeping the flag at 0.
This causes __cfg80211_get_bss(), invoked by nl80211_assoc_bss(), to
fail the check "(bss->pub.use_for & use_for) != use_for", thereby
blocking association.
Replace the bitwise AND operation with direct assignment so the use_for
flag accurately reflects the current BSS state.
Fixes: d02a12b8e4 ("wifi: cfg80211: add BSS usage reporting")
Signed-off-by: Huang Chenming <chenming.huang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251209025733.2098456-1-chenming.huang@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement fallback to LPI mode when SP mode is not permitted
by regulatory constraints for INDOOR_SP connections.
Limit fallback mechanism to client mode.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110140806.8b43201a34ae.I37fc7bb5892eb9d044d619802e8f2095fde6b296@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move duplicated ap_power type handling code to an inline
function in cfg80211.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110140806.959948da1cb5.I893b5168329fb3232f249c182a35c99804112da6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- iwlwifi: major cleanups/rework
- brcmfmac: gets AP isolation support
- mac80211: gets more S1G support
-----BEGIN PGP SIGNATURE-----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=Nlkd
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Plenty of things going on, notably:
- iwlwifi: major cleanups/rework
- brcmfmac: gets AP isolation support
- mac80211: gets more S1G support
* tag 'wireless-next-2025-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (94 commits)
wifi: mwifiex: fix endianness handling in mwifiex_send_rgpower_table
wifi: cfg80211: Remove the redundant wiphy_dev
wifi: mac80211: fix incorrect comment
wifi: cfg80211: update the time stamps in hidden ssid
wifi: mac80211: Fix HE capabilities element check
wifi: mac80211: add tx_handlers_drop statistics to ethtool
wifi: mac80211: fix reporting of all valid links in sta_set_sinfo()
wifi: iwlwifi: mld: CHANNEL_SURVEY_NOTIF is always supported
wifi: iwlwifi: mld: remove support of iwl_esr_mode_notif version 1
wifi: iwlwifi: mld: remove support from of sta cmd version 1
wifi: iwlwifi: mld: remove support of roc cmd version 5
wifi: iwlwifi: mld: remove support of mac cmd ver 2
wifi: iwlwifi: mld: don't consider phy cmd version 5
wifi: iwlwifi: implement wowlan status notification API update
wifi: iwlwifi: fw: Add ASUS to PPAG and TAS list
wifi: iwlwifi: add kunit tests for nvm parse
wifi: iwlwifi: api: add a flag to iwl_link_ctx_modify_flags
wifi: iwlwifi: pcie: move ltr_enabled to the specific transport
wifi: iwlwifi: pcie: move pm_support to the specific transport
wifi: iwlwifi: rename iwl_finish_nic_init
...
====================
Link: https://patch.msgid.link/20250911100854.20445-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In hidden SSID we have separate BSS entries for the beacon and for the
probe response(s).
The BSS entry time stamps represent the age of the BSS;
when was the last time we heard the BSS.
When we receive a beacon of a hidden SSID it means that we heard that
BSS, so it makes sense to indicate that in the probe response entries.
Do that.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250907115135.712745e498c0.I38186abf5d20dec6f6f2d42d2e1cdb50c6bfea25@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement dot11ExtendedRegInfoSupport to advertise non-AP station
regulatory power capability as part of regulatory connectivity
element in (Re)Association request frames so that AP can achieve
maximum client connectivity. Control field which was interpreted
using value of 3-bits B5 to B3, now uses value of 4-bits B6 to B3 to
interpret the type of AP. Hence update IEEE80211_HE_6GHZ_OPER_CTRL_REG_INFO
to parse 4-bits control field. If older AP still updates only 3-bits
value of control field, station can still interpret the value as per
section E.2.7 of IEEE 802.11 REVme D7.0 and support the appropriate
AP type.
Also update IEEE80211_6GHZ_CTRL_REG_INDOOR_SP_AP as the value of
standard power AP is changed to 8 instead of 4 so that AP can support both
LPI AP and SP AP to maximize the connectivity with stations. For backward
compatibility, keeping value 4 as old AP by limiting it to SP AP only.
Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250609213232.90cdef116aad.I85da390fbee59355e3855691933e6a5e55c47ac4@changeid
[fix kernel-doc]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When there are no non-6 GHz channels, then the 6 GHz scan is the first
part of a split scan. Add a boolean denoting whether the scan is the
first part of a scan as it might be useful to drivers for internal
bookkeeping. This flag is also set if the scan is not split.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250609213231.07e5a8a452ec.Ibf18f513e507422078fb31b28947e582a20df87a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Hide the internal scan fields from mac80211 and drivers, the
'notified' variable is for internal tracking, and the 'info'
is output that's passed to cfg80211_scan_done() and stored
only for delayed userspace notification.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250609213231.6a62e41858e2.I004f66e9c087cc6e6ae4a24951cf470961ee9466@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
S1G beacons are not traditional beacons but a type of extension frame.
Extension frames contain the frame control and duration fields, followed
by zero or more optional fields before the frame body. These optional
fields are distinct from the variable length elements.
The presence of optional fields is indicated in the frame control field.
To correctly locate the elements offset, the frame control must be parsed
to identify which optional fields are present. Currently, mac80211 parses
S1G beacons based on fixed assumptions about the frame layout, without
inspecting the frame control field. This can result in incorrect offsets
to the "variable" portion of the frame.
Properly parse S1G beacon frames by using the field lengths defined in
IEEE 802.11-2024, section 9.3.4.3, ensuring that the elements offset is
calculated accurately.
Fixes: 9eaffe5078 ("cfg80211: convert S1G beacon to scan results")
Fixes: cd418ba63f ("mac80211: convert S1G beacon to scan results")
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250603053538.468562-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently during the multi-link element defragmentation process, the
multi-link element length added to the total IEs length when calculating
the length of remaining IEs after the multi-link element in
cfg80211_defrag_mle(). This could lead to out-of-bounds access if the
multi-link element or its corresponding fragment elements are the last
elements in the IEs buffer.
To address this issue, correctly calculate the remaining IEs length by
deducting the multi-link element end offset from total IEs end offset.
Cc: stable@vger.kernel.org
Fixes: 2481b5da9c ("wifi: cfg80211: handle BSS data contained in ML probe responses")
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://patch.msgid.link/20250424-fix_mle_defragmentation_oob_access-v1-1-84412a1743fa@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This information is exposed to userspace but not drivers. Make this
field public so that drivers are also able to access it. The information
is for example useful for link selection to determine whether the BSS
corresponding to an MLO link has been seen in a recent scan.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250212082137.b682ee7aebc8.I0f7cca9effa2b1cee79f4f2eb8b549c99b4e0571@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies(E * 1000)
+secs_to_jiffies(E)
-msecs_to_jiffies(E * MSEC_PER_SEC)
+secs_to_jiffies(E)
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Link: https://patch.msgid.link/20250219203240.141272-1-eahariha@linux.microsoft.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In 'cfg80211_scan_6ghz()', an instances of 'struct cfg80211_colocated_ap'
are allocated as if they would have 'ssid' as trailing VLA member. Since
this is not so, extra IEEE80211_MAX_SSID_LEN bytes are not needed.
Briefly tested with KUnit.
Fixes: c8cb5b854b ("nl80211/cfg80211: support 6 GHz scanning")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20250113155417.552587-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There really shouldn't be duplicate entries when we give
the list to the driver, and since we already have a list
it's easy to avoid.
While at it, remove the unnecessary allocation there.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250101070249.b0012c70f503.Id6fcad979434c1437340aa283abae2906345cca1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
According to Draft P802.11be_D7.0 clause 35.3.4.2, if a multi-link
request requests an MLD with which an AP corresponding to the
nontransmitted BSSID, the corresponding multi-link probe response
shall carry a basic multi-mink element of that MLD in the frame body
of the multi-link probe response, whose location is outside of the
Multiple BSSID element carried in the frame.
Therefore additional handing is needed for parsing multi-link probe
response and generating the merged elements so that the MLD in the frame
body can be correctly copied to the generated elements. Otherwise, the
nontransmitted BSS looks like non-MLD.
Signed-off-by: Money Wang <money.wang@mediatek.com>
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://patch.msgid.link/20241225073725.847062-1-michael-cy.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Define a guard for the wiphy mutex, and use it in
most code in cfg80211, though not all due to some
interaction with RTNL and/or indentation.
Suggested-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241122094225.88765cbaab65.I610c9b14f36902e75e1d13f0db29f8bef2298804@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This allows users to prevent a vif from affecting radios other than the
configured ones. This can be useful in cases where e.g. an AP is running
on one radio, and triggering a scan on another radio should not disturb it.
Changing the allowed radios list for a vif is supported, but only while
it is down.
While it is possible to achieve the same by always explicitly specifying
a frequency list for scan requests and ensuring that the wrong channel/band
is never accidentally set on an unrelated interface, this change makes
multi-radio wiphy setups a lot easier to deal with for CLI users.
By itself, this patch only enforces the radio mask for scanning requests
and remain-on-channel. Follow-up changes build on this to limit configured
frequencies.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/eefcb218780f71a1549875d149f1196486762756.1728462320.git-series.nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, in cfg80211_parse_ml_elem_sta_data(), when RNR element
indicates a BSS that operates in a channel that current regulatory
domain doesn't support, a NULL value is returned by
ieee80211_get_channel_khz() and assigned to this BSS entry's channel
field. Later in cfg80211_inform_single_bss_data(), the reported
BSS entry's channel will be wrongly overridden by transmitted BSS's.
This could result in connection failure that when wpa_supplicant
tries to select this reported BSS entry while it actually resides in
an unsupported channel.
Since this channel is not supported, it is reasonable to skip such
entries instead of reporting wrong information.
Signed-off-by: Chenming Huang <quic_chenhuan@quicinc.com>
Link: https://patch.msgid.link/20240923021644.12885-1-quic_chenhuan@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Avoid overriding BSS information generated from MBSSID or direct source
with BSS information generated from per-STA profile source to avoid
losing actual signal strength and information elements such as RNR and
Basic ML elements.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://patch.msgid.link/20240904030917.3602369-4-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently signal of the BSS entry generated from the per-STA profile
indicated as zero, but userspace may consider it as high signal
strength since 0 dBm is a valid RSSI value.
To avoid this don't report the signal to userspace when the BSS entry
created from a per-STA profile.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://patch.msgid.link/20240904030917.3602369-3-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Define public enum with BSS source types in core.h. Upcoming patches
need this to store BSS source type in struct cfg80211_internal_bss.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://patch.msgid.link/20240904030917.3602369-2-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Replace rcu_dereference() with rcu_access_pointer() since we already
hold the lock and own the 'tmp' at this point. This is needed to avoid
suspicious rcu_dereference_check warnings in__cfg80211_bss_update error
paths.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://patch.msgid.link/20240904142021.3887360-1-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Looking at https://syzkaller.appspot.com/bug?extid=1a3986bbd3169c307819
and running reproducer with CONFIG_UBSAN_BOUNDS, I've noticed the
following:
[ T4985] UBSAN: array-index-out-of-bounds in net/wireless/scan.c:3479:25
[ T4985] index 164 is out of range for type 'struct ieee80211_channel *[]'
<...skipped...>
[ T4985] Call Trace:
[ T4985] <TASK>
[ T4985] dump_stack_lvl+0x1c2/0x2a0
[ T4985] ? __pfx_dump_stack_lvl+0x10/0x10
[ T4985] ? __pfx__printk+0x10/0x10
[ T4985] __ubsan_handle_out_of_bounds+0x127/0x150
[ T4985] cfg80211_wext_siwscan+0x11a4/0x1260
<...the rest is not too useful...>
Even if we do 'creq->n_channels = n_channels' before 'creq->ssids =
(void *)&creq->channels[n_channels]', UBSAN treats the latter as
off-by-one error. Fix this by using pointer arithmetic rather than
an expression with explicit array indexing and use convenient
'struct_size()' to simplify the math here and in 'kzalloc()' above.
Fixes: 5ba63533bb ("cfg80211: fix alignment problem in scan request")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20240905150400.126386-1-dmantipov@yandex.ru
[fix coding style for multi-line calculation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add cfg80211_get_6ghz_power_type() to parse the 6 GHz
power type from a given set of elements, which is now
only inside cfg80211_6ghz_power_type_valid().
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.84cdffd94085.I76f434ee12552e8be91273f3b2d776179eaa62f1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jiazi Li reported that they occasionally see hash table duplicates
as evidenced by the WARN_ON() in rb_insert_bss() in this code. It
isn't clear how that happens, nor have I been able to reproduce it,
but if it does happen, the kernel crashes later, when it tries to
unhash the entry that's now not hashed.
Try to make this situation more survivable by removing the BSS from
the list(s) as well, that way it's fully leaked here (as had been
the intent in the hash insert error path), and no longer reachable
through the list(s) so it shouldn't be unhashed again later.
Link: https://lore.kernel.org/r/20231026013528.GA24122@Jiazi.Li
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240607181726.36835-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In nl80211, we always set the ssids of a scan request to
NULL when n_ssids==0 (passive scan). Drivers have relied
on this behaviour in the past, so we fixed it in 6 GHz
scan requests as well, and added a warning so we'd have
assurance the API would always be called that way.
syzbot found that wext doesn't ensure that, so we reach
the check and trigger the warning. Fix the wext code to
set the ssids pointer to NULL when there are none.
Reported-by: syzbot+cd6135193ba6bb9ad158@syzkaller.appspotmail.com
Fixes: f7a8b10bfd ("wifi: cfg80211: fix 6 GHz scan request building")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The 6 GHz scan request struct allocated by cfg80211_scan_6ghz() is
meant to be formed this way:
[base struct][channels][ssids][6ghz_params]
It is allocated with [channels] as the maximum number of channels
supported by the driver in the 6 GHz band, since allocation is
before knowing how many there will be.
However, the inner pointers are set incorrectly: initially, the
6 GHz scan parameters pointer is set:
[base struct][channels]
^ scan_6ghz_params
and later the SSID pointer is set to the end of the actually
_used_ channels.
[base struct][channels]
^ ssids
If many APs were to be discovered, and many channels used, and
there were many SSIDs, then the SSIDs could overlap the 6 GHz
parameters.
Additionally, the request->ssids for most of the function points
to the original request still (given the struct copy) but is used
normally, which is confusing.
Clear this up, by actually using the allocated space for 6 GHz
parameters _after_ the SSIDs, and set up the SSIDs initially so
they are used more clearly. Just like in nl80211.c, set them
only if there actually are SSIDs though.
Finally, also copy the elements (ie/ie_len) so they're part of
the same request, not pointing to the old request.
Co-developed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240510113738.4190692ef4ee.I0cb19188be17a8abd029805e3373c0a7777c214c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If a non-TX BSS is included in a per-STA profile, then we cannot set
transmitted_bss for it. Even worse, if we do things properly we should
be configuring both bssid_index and max_bssid_indicator correctly. We do
not actually have both pieces of information (and, some APs currently
do not include either).
So, ignore any per-STA profile where the RNR says that the BSS is not
transmitted. Also fix transmitted_bss to never be set for per-STA
profiles.
This fixes issues where mac80211 was setting the reference BSSID to an
incorrect value.
Fixes: 2481b5da9c ("wifi: cfg80211: handle BSS data contained in ML probe responses")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240318184907.6a0babed655a.Iad447fea417c63f683da793556b97c31d07a4aab@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a verification that the BSSID Index does not exceed the maximum
number of BSSIDs in the Multiple-BSSID set.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240318184907.a7574d415adc.I02f40c2920a9f602898190679cc27d0c8ee2c67d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Mark Indoor LPI and Indoor AFC power types as valid based on channel flags.
While on it, added default case.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240318184907.091cfaaa5f45.I23cfa1104a16fd4eb9751b3d0d7b158db4ff3ecd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we just want to determine the length of the fragmented
data, we basically need the same logic, and really we want
it to be _literally_ the same logic, so it cannot be out
of sync in any way.
Allow calling cfg80211_defragment_element() without an output
buffer, where it then just returns the required output size.
Also add this to the tests, just to exercise it, using the
pre-calculated length to really do the defragmentation, which
checks that this is sufficient.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://msgid.link/20240228095718.6d6565b9e3f2.Ib441903f4b8644ba04b1c766f90580ee6f54fc66@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
