nl80211_pmsr_start() assigns the request cookie, calls the driver's
->start_pmsr() callback, and only then adds the request to
wdev->pmsr_list, without holding pmsr_lock for the addition.
mac80211_hwsim saves the request in its start callback and returns. Since
nl80211 uses parallel_ops, an immediate REPORT_PMSR can then run before
nl80211_pmsr_start() reaches its post-start list_add_tail(). hwsim also
dispatches reports from its virtio receive workqueue. Completion removes
the request from wdev->pmsr_list under pmsr_lock and frees it.
Thus completion can precede publication, race the unlocked list mutation,
or free the request before nl80211_pmsr_start() reads req->cookie for the
netlink reply.
Add the request to wdev->pmsr_list under pmsr_lock before calling the
driver, and use a cookie value saved before the call so the request is not
dereferenced after a successful start. On an error return the driver has
not retained or completed the request, so remove it from the list under the
lock and free it.
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Link: https://lore.kernel.org/all/20260723010916.76433-1-enderaoelyther@gmail.com/
Assisted-by: Codex:gpt-5
Assisted-by: Claude:opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260723202223.99661-1-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
pmsr_parse_ftm() rejects a request that omits NOMINAL_TIME only for
non-trigger-based PD ranging. It then reads the attribute
unconditionally for every non-trigger-based request:
out->ftm.nominal_time =
nla_get_u32(tb[NL80211_PMSR_FTM_REQ_ATTR_NOMINAL_TIME]);
For the other non-trigger-based request types NOMINAL_TIME is optional,
so tb[...] can be NULL and nla_get_u32() dereferences a NULL pointer.
Keep the requirement for PD ranging and read the nominal-time value only
when the attribute is present.
Fixes: 8823a9b0e7 ("wifi: cfg80211: add NTB continuous ranging and FTM request type support")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5
Assisted-by: Claude:opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260708195911.84365-5-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A PMSR request with an empty peers array is not a useful request and
weakens the cfg80211-to-driver contract by allowing start_pmsr() with
no target peer.
Reject empty peer lists before allocating the request object or calling
into the driver.
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Assisted-by: Codex:gpt-5.5
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260612133717.93783-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
PMSR FTM location request flags are syntactically valid, but they must
be rejected when the device capability does not advertise support for
them.
Return an error immediately after rejecting unsupported LCI or civic
location request bits so the request cannot reach the driver.
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Assisted-by: Codex:gpt-5.5
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260612133710.93544-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
PMSR request parsing accepts missing or duplicated measurement type
entries in NL80211_PMSR_REQ_ATTR_DATA.
Track whether one measurement type was already provided, reject a
second one immediately, and return an error if the request data block
contains no measurement type at all.
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Assisted-by: Codex:gpt-5.5
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260612133656.92900-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a netlink socket that owns a PMSR session is closed,
cfg80211_release_pmsr() clears the request's nl_portid and queues
pmsr_free_wk to call cfg80211_pmsr_process_abort() asynchronously.
If the interface tears down concurrently, cfg80211_pmsr_wdev_down()
is called under wiphy_lock and calls cancel_work_sync(&pmsr_free_wk)
to wait for any running work. The work function acquires wiphy_lock
via guard(wiphy) before calling process_abort.
This is a deadlock: wdev_down holds wiphy_lock and blocks inside
cancel_work_sync(); pmsr_free_wk blocks trying to acquire that same
wiphy_lock. Neither thread can proceed.
The same deadlock is reachable from cfg80211_leave_locked(), which
calls cfg80211_pmsr_wdev_down() for all interface types under
wiphy_lock.
Fix this by converting pmsr_free_wk from a plain work_struct to a
wiphy_work. The wiphy_work dispatcher holds wiphy_lock when running
work items, so the explicit guard(wiphy) in the work function is no
longer needed. wiphy_work_cancel() can be called safely while holding
wiphy_lock - since wiphy_lock prevents the work from running
concurrently, wiphy_work_cancel() never blocks, eliminating the
deadlock.
Remove the cancel_work_sync() for pmsr_free_wk from the
NETDEV_GOING_DOWN handler. cfg80211_leave(), called unconditionally
just before it, already cancels any pending work under wiphy_lock
via wiphy_work_cancel() inside cfg80211_pmsr_wdev_down().
Fixes: 6dccbc9f3e ("wifi: cfg80211: cancel pmsr_free_wk in cfg80211_pmsr_wdev_down")
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260703082523.2629324-1-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is documented as a u8 and has a policy of NLA_U8, but uses
nla_get_u32() which means it's completely broken on big-endian.
Fix it to use nla_get_u8().
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Link: https://patch.msgid.link/20260505113837.260159-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add the necessary fields to the chandef data structure
to represent NPCA (the NPCA primary channel and NPCA
punctured/disabled subchannels bitmap), and the code
to check these for validity, compatibility, as well as
allowing it to be passed for AP mode for capable
devices.
Compatibility is assumed to only be the case when it's
actually identical, enabling later management of this
in channel contexts in mac80211 for multiple APs, but
requiring userspace to set up the identical chandef on
all AP interfaces that share a channel (and BSS color.)
Link: https://patch.msgid.link/20260428112708.46f3872aeb35.I85888dab88a6659ba52db4b3318979ca5bcfc0c8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Proximity detection often does not require detailed ranging
measurements, yet userspace currently receives full FTM results for
every request, causing unnecessary data transfer, host wakeups, and
processing overhead.
Add an optional control to suppress ranging result reporting for
peer-to-peer PD requests. Introduce the
NL80211_PMSR_FTM_REQ_ATTR_PD_SUPPRESS_RESULTS flag; when set with a
PD request, the device may perform the measurements (e.g. when acting
as RSTA) but must not report the measurement results to userspace.
Validate that the flag is only accepted when request_type is set to
NL80211_PMSR_FTM_REQ_TYPE_PD, reject otherwise.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-12-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Devices may support different preamble and bandwidth configurations
for proximity detection (PD) ranging versus standard ranging. Add
separate pd_preambles and pd_bandwidths fields to
cfg80211_pmsr_capabilities to allow drivers to advertise PD-specific
capabilities.
Expose these over nl80211 using new attributes
NL80211_PMSR_FTM_CAPA_ATTR_PD_PREAMBLES and
NL80211_PMSR_FTM_CAPA_ATTR_PD_BANDWIDTHS, advertised only when
pd_support is set.
For PD requests, validate bandwidth and preamble against pd_bandwidths
and pd_preambles. For non-PD requests, validate against the existing
bandwidths and preambles fields.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-11-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Proximity detection applications need to receive measurement results
only when devices cross specific distance boundaries to avoid
unnecessary host wakeups and reduce power consumption.
Introduce configurable distance-based reporting thresholds that
drivers can use to implement selective result reporting. Add ingress
and egress distance parameters allowing applications to specify when
results should be reported as peers cross these boundaries.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-10-peddolla.reddy@oss.qualcomm.com
[remove mm units from variables]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Peer measurement capabilities currently advertise a single maximum
peer count regardless of device role. Some devices support different
peer limits when operating as initiator versus responder.
Add max_peers fields inside the ftm.ista and ftm.rsta sub-structs of
cfg80211_pmsr_capabilities to allow drivers to advertise per-role peer
limits. These limits are generic and not restricted to any specific
ranging type.
Expose these over nl80211 using new NL80211_PMSR_ATTR_MAX_PEER_ISTA_ROLE
and NL80211_PMSR_ATTR_MAX_PEER_RSTA_ROLE attributes inside the
ISTA_CAPS and RSTA_CAPS nested attributes respectively.
When a role limit is advertised, validate the number of peers in the
request separately for each role using the existing rsta flag in the
FTM request, and reject the request if the limit is exceeded.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-9-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Applications need negotiated session parameters to interpret
proximity ranging results and perform post-processing. Currently,
the FTM response lacks LTF repetition counts, time constraints,
spatial stream configuration, and availability window parameters.
Extend the FTM response structure to report these negotiated
parameters, enabling applications to track session configuration
and use them in post-processing to increase ranging precision.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-8-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Enable NTB continuous ranging with configurable timing and measurement
parameters as per the Wi-Fi Alliance specification "Proximity Ranging
(PR) Implementation Consideration Draft 1.9 Rev 1, section 5.3". Add
new FTM request attributes for min/max time between measurements,
nominal time (mandatory for NTB), AW duration, and total measurement
count.
Add NL80211_PMSR_PEER_ATTR_REQ_TYPE attribute using the new
nl80211_peer_measurement_ftm_req_type enum to allow userspace to
specify the ranging request type per peer:
- NL80211_PMSR_FTM_REQ_TYPE_INFRA: STA-to-AP or AP-to-STA ranging
(default if attribute is absent)
- NL80211_PMSR_FTM_REQ_TYPE_PD: peer-to-peer ranging
Validate the request type against the device TYPE_CAPS capabilities
advertised via NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS. Reject PD
requests if the device does not advertise PD support.
Reject PD requests that set trigger-based ranging, as TB ranging is
not compatible with peer-to-peer proximity detection.
Add ftms_per_burst limit of 4 for PD NTB ranging requests.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-7-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Introduce Proximity Detection (PD) capabilities in Peer Measurement
Service (PMSR) as defined in the Wi-Fi Alliance specification
"Proximity Ranging (PR) Implementation Consideration Draft 1.9 Rev 1
section 3.3". This enables devices to advertise peer to peer ranging
support.
Restructure FTM capabilities in cfg80211_pmsr_capabilities to replace
the single support_rsta flag with nested ista and rsta sub-structs,
each carrying per-mode flags for Non-Trigger Based (NTB), Trigger Based
(TB), and EDCA based ranging. This allows drivers to advertise detailed
role and protocol support for both initiator and responder roles.
Add support to pass additional ISTA and RSTA role capabilities to
userspace using new nested ISTA_CAPS and RSTA_CAPS attributes. The
legacy RSTA_SUPPORT flag is retained for backward compatibility.
Add NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS nested attribute using the
nl80211_peer_measurement_ftm_type_capa enum with two sub-flags:
NL80211_PMSR_FTM_TYPE_CAPA_ATTR_INFRA_SUPPORT for STA-to-AP or
AP-to-STA ranging, and NL80211_PMSR_FTM_TYPE_CAPA_ATTR_PD_SUPPORT
for peer-to-peer ranging.
Add CONCURRENT_ISTA_RSTA_SUPPORT as a FTM capability flag indicating
the device can simultaneously act as initiator and responder in a
multi-peer measurement request.
Extend FTM capabilities with antenna configuration fields
(max_no_of_tx_antennas, max_no_of_rx_antennas) for the PR Element
during PASN negotiation, and ranging interval limits
(min_allowed_ranging_interval_edca, min_allowed_ranging_interval_ntb)
to advertise device timing constraints for EDCA and NTB-based ranging.
Update the FTM request validation path in pmsr.c to check RSTA
requests against the per-mode rsta capabilities (NTB, TB, EDCA),
rejecting requests for modes the device does not support.
Co-developed-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-6-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The lmr_feedback field is only applicable to TB and non-TB ranging.
Currently, pmsr_parse_ftm() enforces lmr_feedback for all RSTA
requests, incorrectly rejecting valid EDCA-based RSTA requests.
Fix this by limiting the lmr_feedback requirement to TB and non-TB
ranging only.
Fixes: 853800c746 ("wifi: nl80211/cfg80211: support operating as RSTA in PMSR FTM request")
Co-developed-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-2-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the nl80211 socket that originated a PMSR request is
closed, cfg80211_release_pmsr() sets the request's nl_portid
to zero and schedules pmsr_free_wk to process the abort
asynchronously. If the interface is concurrently torn down
before that work runs, cfg80211_pmsr_wdev_down() calls
cfg80211_pmsr_process_abort() directly. However, the already-
scheduled pmsr_free_wk work item remains pending and may run
after the interface has been removed from the driver. This
could cause the driver's abort_pmsr callback to operate on a
torn-down interface, leading to undefined behavior and
potential crashes.
Cancel pmsr_free_wk synchronously in cfg80211_pmsr_wdev_down()
before calling cfg80211_pmsr_process_abort(). This ensures any
pending or in-progress work is drained before interface teardown
proceeds, preventing the work from invoking the driver abort
callback after the interface is gone.
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260305160712.1263829-3-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to be able to use this function also for nested attributes,
change this function to receive a pointer to extack and to the
attributes array, instead of receiving the info and extracting them out
of it.
While at it, use NL_SET_ERR_MSG_ATTR with the frequency of the chandef.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.2b994566a63b.I6c2b6f4c7e2e09f4c47285ca4ac8a37b20700e19@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Add an option to operate as the RSTA in an FTM measurement request.
When requested, the device will dwell on the requested channel until
the peer starts the FTM negotiation. This option is only valid for
trigger-based/non trigger-based measurement with LMR feedback which
will allow the RSTA to receive the results of the measurement.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260111190221.1f95fc0afab4.Iae2d32783b8e7c4a29089fec0f4c6bce94d303cc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The FTM result includes some of the periodic measurement negotiated
parameters (like the burst duration and number of bursts), but it
doesn't include the burst period. Add it to the FTM result
notification.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260111190221.e0778f86edef.I3c98c1933eb639963bc3ffdef81a8788b59f2188@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Periodic FTM request attributes are defined based on the periodic
parameters used in EDCA-based ranging negotiation. However, non-EDCA
based ranging (trigger-based/non-trigger-based) does not include
periodic parameters in the negotiation protocol, even though upper
layers may still request periodic measurements.
Clarify the semantics of periodic ranging attributes when used with
non-EDCA based ranging.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260111190221.b89cb3f68e1a.I7a9d8c6d1c66c77f1b43120a841101c96c3f19ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Define a guard for the wiphy mutex, and use it in
most code in cfg80211, though not all due to some
interaction with RTNL and/or indentation.
Suggested-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241122094225.88765cbaab65.I610c9b14f36902e75e1d13f0db29f8bef2298804@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In NDP ranging, the number of NDP exchanges is not negotiated
and thus is not limited by the protocol. Remove the limit on
FTMs per burst for trigger based and non trigger based ranging.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605135233.916e228537d9.I5fe4c1cefa1c1328726e7615dd5a0d861c694381@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The commit 9bb7e0f24e ("cfg80211: add peer measurement with FTM
initiator API") defines four attributes NL80211_PMSR_FTM_REQ_ATTR_
{NUM_BURSTS_EXP}/{BURST_PERIOD}/{BURST_DURATION}/{FTMS_PER_BURST} in
following ways.
static const struct nla_policy
nl80211_pmsr_ftm_req_attr_policy[NL80211_PMSR_FTM_REQ_ATTR_MAX + 1] = {
...
[NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP] =
NLA_POLICY_MAX(NLA_U8, 15),
[NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD] = { .type = NLA_U16 },
[NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION] =
NLA_POLICY_MAX(NLA_U8, 15),
[NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST] =
NLA_POLICY_MAX(NLA_U8, 31),
...
};
That is, those attributes are expected to be NLA_U8 and NLA_U16 types.
However, the consumers of these attributes in `pmsr_parse_ftm` blindly
all use `nla_get_u32`, which is incorrect and causes functionality issues
on little-endian platforms. Hence, fix them with the correct `nla_get_u8`
and `nla_get_u16` functions.
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://msgid.link/20240521075059.47999-1-linma@zju.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since we're now protecting everything with the wiphy mutex
(and were really using it for almost everything before),
there's no longer any real reason to have a separate wdev
mutex. It may feel better, but really has no value.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct cfg80211_pmsr_request.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230817211531.4193219-4-keescook@chromium.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Most code paths in cfg80211 already hold the wiphy lock,
mostly by virtue of being called from nl80211, so make
the pmsr cleanup worker also hold it, aligning the
locking promises between different parts of cfg80211.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If cfg80211_pmsr_process_abort() moves all the PMSR requests that
need to be freed into a local list before aborting and freeing them.
As a result, it is possible that cfg80211_pmsr_complete() will run in
parallel and free the same PMSR request.
Fix it by freeing the request in cfg80211_pmsr_complete() only if it
is still in the original pmsr list.
Cc: stable@vger.kernel.org
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.1fbef57e269a.I00294bebdb0680b892f8d1d5c871fd9dbe785a5e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Now that we have limited recursive policy validation to avoid
stack overflows, change nl80211 to actually link the nested
policy (linking back to itself eventually), which allows some
code cleanups.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for requesting that the ranging measurement will use
the trigger-based / non trigger-based flow instead of the EDCA based
flow.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20200131111300.891737-2-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead of reporting the AP's TSF, host time was reported. Fix it.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We currently have two levels of strict validation:
1) liberal (default)
- undefined (type >= max) & NLA_UNSPEC attributes accepted
- attribute length >= expected accepted
- garbage at end of message accepted
2) strict (opt-in)
- NLA_UNSPEC attributes accepted
- attribute length >= expected accepted
Split out parsing strictness into four different options:
* TRAILING - check that there's no trailing data after parsing
attributes (in message or nested)
* MAXTYPE - reject attrs > max known type
* UNSPEC - reject attributes with NLA_UNSPEC policy entries
* STRICT_ATTRS - strictly validate attribute size
The default for future things should be *everything*.
The current *_strict() is a combination of TRAILING and MAXTYPE,
and is renamed to _deprecated_strict().
The current regular parsing has none of this, and is renamed to
*_parse_deprecated().
Additionally it allows us to selectively set one of the new flags
even on old policies. Notably, the UNSPEC flag could be useful in
this case, since it can be arranged (by filling in the policy) to
not be an incompatible userspace ABI change, but would then going
forward prevent forgetting attribute entries. Similar can apply
to the POLICY flag.
We end up with the following renames:
* nla_parse -> nla_parse_deprecated
* nla_parse_strict -> nla_parse_deprecated_strict
* nlmsg_parse -> nlmsg_parse_deprecated
* nlmsg_parse_strict -> nlmsg_parse_deprecated_strict
* nla_parse_nested -> nla_parse_nested_deprecated
* nla_validate_nested -> nla_validate_nested_deprecated
Using spatch, of course:
@@
expression TB, MAX, HEAD, LEN, POL, EXT;
@@
-nla_parse(TB, MAX, HEAD, LEN, POL, EXT)
+nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT)
@@
expression NLH, HDRLEN, TB, MAX, POL, EXT;
@@
-nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT)
+nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT)
@@
expression NLH, HDRLEN, TB, MAX, POL, EXT;
@@
-nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT)
+nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT)
@@
expression TB, MAX, NLA, POL, EXT;
@@
-nla_parse_nested(TB, MAX, NLA, POL, EXT)
+nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT)
@@
expression START, MAX, POL, EXT;
@@
-nla_validate_nested(START, MAX, POL, EXT)
+nla_validate_nested_deprecated(START, MAX, POL, EXT)
@@
expression NLH, HDRLEN, MAX, POL, EXT;
@@
-nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT)
+nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT)
For this patch, don't actually add the strict, non-renamed versions
yet so that it breaks compile if I get it wrong.
Also, while at it, make nla_validate and nla_parse go down to a
common __nla_validate_parse() function to avoid code duplication.
Ultimately, this allows us to have very strict validation for every
new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the
next patch, while existing things will continue to work as is.
In effect then, this adds fully strict validation for any new command.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most
netlink based interfaces (including recently added ones) are still not
setting it in kernel generated messages. Without the flag, message parsers
not aware of attribute semantics (e.g. wireshark dissector or libmnl's
mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display
the structure of their contents.
Unfortunately we cannot just add the flag everywhere as there may be
userspace applications which check nlattr::nla_type directly rather than
through a helper masking out the flags. Therefore the patch renames
nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start()
as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually
are rewritten to use nla_nest_start().
Except for changes in include/net/netlink.h, the patch was generated using
this semantic patch:
@@ expression E1, E2; @@
-nla_nest_start(E1, E2)
+nla_nest_start_noflag(E1, E2)
@@ expression E1, E2; @@
-nla_nest_start_noflag(E1, E2 | NLA_F_NESTED)
+nla_nest_start(E1, E2)
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge net-next to resolve a conflict and to get the mac80211
rhashtable fixes so further patches can be applied on top.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch is to use eth_broadcast_addr() to assign broadcast address
insetad of memset().
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Without recording the netlink port ID, we cannot return the
results or complete messages to userspace, nor will we be
able to abort if the socket is closed, so clearly we need
to fill the value.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we destroy the interface we already hold the wdev->mtx
while calling cfg80211_pmsr_wdev_down(), which assumes this
isn't true and flushes the worker that takes the lock, thus
leading to a deadlock.
Fix this by refactoring the worker and calling its code in
cfg80211_pmsr_wdev_down() directly.
We still need to flush the work later to make sure it's not
still running and will crash, but it will not do anything.
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we *don't* have a MAC address attribute, we shouldn't
try to use this - this was intended to copy the local MAC
address instead, so fix it.
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a new "peer measurement" API, that can be used to measure
certain things related to a peer. Right now, only implement
FTM (flight time measurement) over it, but the idea is that
it'll be extensible to also support measuring the necessary
things to calculate e.g. angle-of-arrival for WiGig.
The API is structured to have a generic list of peers and
channels to measure with/on, and then for each of those a
set of measurements (again, only FTM right now) to perform.
Results are sent to the requesting socket, including a final
complete message.
Closing the controlling netlink socket will abort a running
measurement.
v3:
- add a bit to report "final" for partial results
- remove list keeping etc. and just unicast out the results
to the requester (big code reduction ...)
- also send complete message unicast, and as a result
remove the multicast group
- separate out struct cfg80211_pmsr_ftm_request_peer
from struct cfg80211_pmsr_request_peer
- document timeout == 0 if no timeout
- disallow setting timeout nl80211 attribute to 0,
must not include attribute for no timeout
- make MAC address randomization optional
- change num bursts exponent default to 0 (1 burst, rather
rather than the old default of 15==don't care)
v4:
- clarify NL80211_ATTR_TIMEOUT documentation
v5:
- remove unnecessary nl80211 multicast/family changes
- remove partial results bit/flag, final is sufficient
- add max_bursts_exponent, max_ftms_per_burst to capability
- rename "frames per burst" -> "FTMs per burst"
v6:
- rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down()
and call it in leave, so the device can't go down with any
pending measurements
v7:
- wording fixes (Lior)
- fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior)
v8:
- copyright statements
- minor coding style fixes
- fix error path leak
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
