phydev->drv can become NULL while the phy_device is still attached to
its net_device, namely after the PHY driver is unbound via sysfs:
echo <mdio_id> > /sys/bus/mdio_bus/drivers/<phy_drv>/unbind
phy_remove() clears phydev->drv but doesn't call phy_detach(), so the
phy_device stays in the link topology xarray and ethnl_req_get_phydev()
still hands it back. ETHTOOL_MSG_PHY_GET then oopses on:
rep_data->drvname = kstrdup(phydev->drv->name, GFP_KERNEL);
drvname is already treated as optional by phy_reply_size(),
phy_fill_reply() and phy_cleanup_data(), so just skip the allocation
when there is no driver bound.
Fixes: 9dd2ad5e92 ("net: ethtool: phy: Convert the PHY_GET command to generic phy dump")
Cc: stable@vger.kernel.org # 6.13.x
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260509215046.107157-1-devnexen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sizeof(u32) on the _RINGS_CQE_SIZE line is missing its closing
parenthesis, causing nla_total_size() to absorb the subsequent
_TX_PUSH and _RX_PUSH entries.
The resulting size estimate happens to be numerically identical
due to NLA alignment, so not treating this as a real fix.
But the nesting is wrong and misleading.
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260508125412.189804-1-cuitao@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In phy_prepare_data(), several strings such as 'name', 'drvname',
'upstream_sfp_name', and 'downstream_sfp_name' are allocated using
kstrdup(). However, these allocations were not checked for failure.
If kstrdup() fails for 'name', it returns NULL while the function
continues. This leads to a kernel NULL pointer dereference and panic
later in phy_reply_size() when it unconditionally calls strlen() on
the NULL pointer.
While other strings like 'upstream_sfp_name' might be checked before
access in certain code paths, failing to handle these allocations
consistently can lead to incomplete data reporting or hidden bugs.
Fix this by adding proper NULL checks for all kstrdup() calls in
phy_prepare_data() and implement a centralized error handling path
using goto labels to ensure all previously allocated resources are
freed on failure.
Fixes: 9dd2ad5e92 ("net: ethtool: phy: Convert the PHY_GET command to generic phy dump")
Signed-off-by: Quan Sun <2022090917019@std.uestc.edu.cn>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260507131738.1173835-1-2022090917019@std.uestc.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netlink attribute length field nla_len is a __u16, which can only
represent values up to 65535 bytes. NICs with a large number of
statistics strings (e.g. mlx5_core with thousands of ETH_SS_STATS
entries) can produce a ETHTOOL_A_STRINGSET_STRINGS nest that exceeds
this limit.
When nla_nest_end() writes the actual nest size back to nla_len, the
value is silently truncated. This results in a corrupted netlink message
being sent to userspace: the parser reads a wrong (truncated) attribute
length and misaligns all subsequent attribute boundaries, causing decode
errors.
Fix this by using the new helper nla_nest_end_safe and error out if
the size exceeds U16_MAX.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20260408-b4-ynl_ethtool-v2-5-7623a5e8f70b@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to AF_XDP, do not allow queues in a physical netdev to be resized
by ethtool -L when they are leased. Cover channel resize paths (both
netlink and ioctl) to reject resizing when the queues would be affected.
Given we need to have different checks for RX vs TX, detangle the code into
a two-loop version rather than the range of new_combined + min(new_rx, new_tx)
to old_combined + max(old_rx, old_tx).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260402231031.447597-5-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .parse_request() ethnl operation extracts the relevant attributes
from the netlink request to populate the private req_info.
By passing genl_info as a parameter to this callback, we can use
the GENL_REQ_ATTR_CHECK() macro to check for missing mandatory
parameters.
This macro has the advantage of returning a better error explanation
through the netlink_ext_ack struct.
Convert the eeprom ethnl code to this macro, as it's the only command
yet that has mandatory request parameters.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260323095833.136266-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The core locks ctx->indir_size when an RSS context is created. Some
NICs (e.g. bnxt) change their indirection table size based on the
channel count, because the hardware table is a shared resource. This
forces drivers to reject channel changes when RSS contexts exist.
Add driver helpers to resize indirection tables:
ethtool_rxfh_indir_can_resize() checks whether the default context
indirection table can be resized.
ethtool_rxfh_indir_resize() resizes the default context table in
place. Folding (shrink) requires the table to be periodic at the new
size; non-periodic tables are rejected. Unfolding (grow) replicates
the existing pattern. Sizes must be multiples of each other.
ethtool_rxfh_ctxs_can_resize() validates all non-default RSS contexts
can be resized.
ethtool_rxfh_ctxs_resize() applies the resize.
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Link: https://patch.msgid.link/20260320085826.1957255-3-bjorn@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Track the number of indirection table entries the user originally
provided (context 0/default as well!).
Replace IFF_RXFH_CONFIGURED with rss_indir_user_size: the flag is
redundant now that user_size captures the same information.
Add ethtool_rxfh_indir_lost() for drivers that must reset the
indirection table.
Convert bnxt and mlx5 to use it.
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Link: https://patch.msgid.link/20260320085826.1957255-2-bjorn@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most local #include in the ethtool command handling is out of order,
with either :
#include "netlink.h"
#include "common.h"
or even :
#include "netlink.h"
#include "common.h"
#include "bitset.h"
One of the reasons is because bitset.h s lacking definitions for
nlattr, netlink_ext_ack, ETH_GSTRING_LEN, and types such as u32, bool,
etc.
Make bitset.h standalone by including <linux/ethtool.h> for
ETH_GSTRING_LEN, and <linux/netlink.h> for nlattr, netlink_ext_ack and
the rest.
While at it, take a pass on ethnl sources to re-order the local
includes :
- put them after the global includes
- add a newline between global and local includes
- alpha-sort the local includes
One notable exception is the cmis.h include, that needs definitions from
module_fw.h. Keep them in this order for now.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260319180555.1531386-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add two parameters for drivers supporting Rx CQE coalescing /
descriptor writeback.
ETHTOOL_A_COALESCE_RX_CQE_FRAMES:
Maximum number of frames that can be coalesced into a CQE or
writeback.
ETHTOOL_A_COALESCE_RX_CQE_NSECS:
Max time in nanoseconds after the first packet arrival in a
coalesced CQE or writeback to be sent.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20260317191826.1346111-2-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With TX pause enabled, if a device is unable to pass packets up to the
stack (e.g., CPU is hanged), the device can cause pause storm. Given
that devices can have native support to protect the neighbor from such
flooding, such events need some tracking. This support is to track TX
pause storm events for better observability.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20260302230149.1580195-2-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Initializing input_xfrm to RXH_XFRM_NO_CHANGE in RSS contexts is
problematic. I think I did this to make it clear that the context
does not have its own settings applied. But unlike ETH_RSS_HASH_NO_CHANGE
which is zero, RXH_XFRM_NO_CHANGE is 0xff. We need to be careful
when reading the value back, and remember to treat 0xff as 0.
Remove the initialization and switch to storing 0. This lets us
also remove the workaround in ethnl_rss_set(). Get side does not
need any adjustments and context get no longer reports:
RSS input transformation:
symmetric-xor: on
symmetric-or-xor: on
Unknown bits in RSS input transformation: 0xfc
for NICs which don't support input_xfrm.
Remove the init of hfunc to ETH_RSS_HASH_NO_CHANGE while at it.
As already mentioned this is a noop since ETH_RSS_HASH_NO_CHANGE
is 0 and struct is zalloc'd. But as this fix exemplifies storing
NO_CHANGE as state is fragile.
This issue is implicitly caught by running our selftests because
YNL in selftests errors out on unknown bits.
Fixes: d3e2c7bab1 ("ethtool: rss: support setting input-xfrm via Netlink")
Link: https://patch.msgid.link/20260130190311.811129-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All drivers that need to report the RX ring count now implement the
get_rx_ring_count callback directly. Remove the legacy fallback path
that obtained this information by calling get_rxnfc with ETHTOOL_GRXRINGS.
This simplifies the code and makes get_rx_ring_count the only way
to retrieve the RX ring count.
Note: ethtool_get_rx_ring_count() returns int to allow returning
-EOPNOTSUPP, while the callback returns u32. The implicit conversion
is safe since RX ring counts will not exceed INT_MAX while we are still
alive.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260126-grxring_final-v1-1-0981cb24512e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 77b9c4a438, reversing
changes made to 4515ec4ad58a37e70a9e1256c0b993958c9b7497:
931420a2fc ("selftests/net: Add netkit container tests")
ab771c938d ("selftests/net: Make NetDrvContEnv support queue leasing")
6be87fbb27 ("selftests/net: Add env for container based tests")
61d99ce3df ("selftests/net: Add bpf skb forwarding program")
920da36341 ("netkit: Add xsk support for af_xdp applications")
eef51113f8 ("netkit: Add netkit notifier to check for unregistering devices")
b5ef109d22 ("netkit: Implement rtnl_link_ops->alloc and ndo_queue_create")
b5c3fa4a0b ("netkit: Add single device mode for netkit")
0073d2fd67 ("xsk: Proxy pool management for leased queues")
1ecea95dd3 ("xsk: Extend xsk_rcv_check validation")
804bf334d0 ("net: Proxy netdev_queue_get_dma_dev for leased queues")
0caa9a8dde ("net: Proxy net_mp_{open,close}_rxq for leased queues")
ff8889ff91 ("net, ethtool: Disallow leased real rxqs to be resized")
9e2103f361 ("net: Add lease info to queue-get response")
31127dedde ("net: Implement netdev_nl_queue_create_doit")
a5546e18f7 ("net: Add queue-create operation")
The series will conflict with io_uring work, and the code needs more
polish.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to AF_XDP, do not allow queues in a physical netdev to be
resized by ethtool -L when they are leased.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260115082603.219152-5-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ethernet provides a wide variety of layer 1 protocols and standards for
data transmission. The front-facing ports of an interface have their own
complexity and configurability.
Introduce a representation of these front-facing ports. The current code
is minimalistic and only support ports controlled by PHY devices, but
the plan is to extend that to SFP as well as raw Ethernet MACs that
don't use PHY devices.
This minimal port representation allows describing the media and number
of pairs of a BaseT port. From that information, we can derive the
linkmodes usable on the port, which can be used to limit the
capabilities of an interface.
For now, the port pairs and medium is derived from devicetree, defined
by the PHY driver, or populated with default values (as we assume that
all PHYs expose at least one port).
The typical example is 100M ethernet. 100BaseTX works using only 2
pairs on a Cat 5 cables. However, in the situation where a 10/100/1000
capable PHY is wired to its RJ45 port through 2 pairs only, we have no
way of detecting that. The "max-speed" DT property can be used, but a
more accurate representation can be used :
mdi {
connector-0 {
media = "BaseT";
pairs = <2>;
};
};
From that information, we can derive the max speed reachable on the
port.
Another benefit of having that is to avoid vendor-specific DT properties
(micrel,fiber-mode or ti,fiber-mode).
This basic representation is meant to be expanded, by the introduction
of port ops, userspace listing of ports, and support for multi-port
devices.
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260108080041.553250-4-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In an effort to have a better representation of Ethernet ports,
introduce enumeration values representing the various ethernet Mediums.
This is part of the 802.3 naming convention, for example :
1000 Base T 4
| | | |
| | | \_ pairs (4)
| | \___ Medium (T == Twisted Copper Pairs)
| \_______ Baseband transmission
\____________ Speed
Other example :
10000 Base K X 4
| | \_ lanes (4)
| \___ encoding (BaseX is 8b/10b while BaseR is 66b/64b)
\_____ Medium (K is backplane ethernet)
In the case of representing a physical port, only the medium and number
of pairs should be relevant. One exception would be 1000BaseX, which is
currently also used as a medium in what appears to be any of 1000BaseSX,
1000BaseCX, 1000BaseLX, 1000BaseEX, 1000BaseBX10 and some other.
This was reflected in the mediums associated with the 1000BaseX linkmode.
These mediums are set in the net/ethtool/common.c lookup table that
maintains a list of all linkmodes with their number of pairs, medium,
encoding, speed and duplex.
One notable exception to this is 100BaseT Ethernet. It emcompasses 100BaseTX,
which is a 2-pairs protocol but also 100BaseT4, that will also work on 4-pairs
cables. As we don't make a disctinction between these, the lookup table
contains 2 sets of pair numbers, indicating the min number of pairs for a
protocol to work and the "nominal" number of pairs as well.
Another set of exceptions are linkmodes such 100000baseLR4_ER4, where
the same link mode seems to represent 100GBaseLR4 and 100GBaseER4. The
macro __DEFINE_LINK_MODE_PARAMS_MEDIUMS is here used to populate the
.mediums bitfield with all appropriate mediums.
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260108080041.553250-3-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ethtool -S command operates across three ioctl calls:
ETHTOOL_GSSET_INFO for the size, ETHTOOL_GSTRINGS for the names, and
ETHTOOL_GSTATS for the values.
If the number of stats changes between these calls (e.g., due to device
reconfiguration), userspace's buffer allocation will be incorrect,
potentially leading to buffer overflow.
Drivers are generally expected to maintain stable stat counts, but some
drivers (e.g., mlx5, bnx2x, bna, ksz884x) use dynamic counters, making
this scenario possible.
Some drivers try to handle this internally:
- bnad_get_ethtool_stats() returns early in case stats.n_stats is not
equal to the driver's stats count.
- micrel/ksz884x also makes sure not to write anything beyond
stats.n_stats and overflow the buffer.
However, both use stats.n_stats which is already assigned with the value
returned from get_sset_count(), hence won't solve the issue described
here.
Change ethtool_get_strings(), ethtool_get_stats(),
ethtool_get_phy_stats() to not return anything in case of a mismatch
between userspace's size and get_sset_size(), to prevent buffer
overflow.
The returned n_stats value will be equal to zero, to reflect that
nothing has been returned.
This could result in one of two cases when using upstream ethtool,
depending on when the size change is detected:
1. When detected in ethtool_get_strings():
# ethtool -S eth2
no stats available
2. When detected in get stats, all stats will be reported as zero.
Both cases are presumably transient, and a subsequent ethtool call
should succeed.
Other than the overflow avoidance, these two cases are very evident (no
output/cleared stats), which is arguably better than presenting
incorrect/shifted stats.
I also considered returning an error instead of a "silent" response, but
that seems more destructive towards userspace apps.
Notes:
- This patch does not claim to fix the inherent race, it only makes sure
that we do not overflow the userspace buffer, and makes for a more
predictable behavior.
- RTNL lock is held during each ioctl, the race window exists between
the separate ioctl calls when the lock is released.
- Userspace ethtool always fills stats.n_stats, but it is likely that
these stats ioctls are implemented in other userspace applications
which might not fill it. The added code checks that it's not zero,
to prevent any regressions.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20251208121901.3203692-1-gal@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce the userspace entry point for PHY MSE diagnostics via
ethtool netlink. This exposes the core API added previously and
returns both capability information and one or more snapshots.
Userspace sends ETHTOOL_MSG_MSE_GET. The reply carries:
- ETHTOOL_A_MSE_CAPABILITIES: scale limits and timing information
- ETHTOOL_A_MSE_CHANNEL_* nests: one or more snapshots (per-channel
if available, otherwise WORST, otherwise LINK)
Link down returns -ENETDOWN.
Changes:
- YAML: add attribute sets (mse, mse-capabilities, mse-snapshot)
and the mse-get operation
- UAPI (generated): add ETHTOOL_A_MSE_* enums and message IDs,
ETHTOOL_MSG_MSE_GET/REPLY
- ethtool core: add net/ethtool/mse.c implementing the request,
register genl op, and hook into ethnl dispatch
- docs: document MSE_GET in ethtool-netlink.rst
The include/uapi/linux/ethtool_netlink_generated.h is generated
from Documentation/netlink/specs/ethtool.yaml.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20251027122801.982364-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce a new document, flow_control.rst, to provide a comprehensive
guide on Ethernet Flow Control in Linux. The guide explains how flow
control works, how autonegotiation resolves pause capabilities, and how
to configure it using ethtool and Netlink.
In parallel, document the pause and pause-stat attributes in the
ethtool.yaml netlink spec. This enables the ynl tool to generate
kernel-doc comments for the corresponding enums in the UAPI header,
making the C interface self-documenting.
Finally, replace the legacy flow control section in phy.rst with a
reference to the new document and add pointers in the relevant C source
files.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250924120241.724850-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
IEEE 802.3ck-2022 defines counters for FEC bins and 802.3df-2024
clarifies it a bit further. Implement reporting interface through as
addition to FEC stats available in ethtool. Drivers can leave bin
counter uninitialized if per-lane values are provided. In this case the
core will recalculate summ for the bin.
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20250924124037.1508846-2-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Timestamping configuration through ethtool has inconsistent behavior of
skipping the reply for set command if configuration was not changed. Fix
it be providing reply in any case.
Fixes: 6e9e2eed4f ("net: ethtool: Add support for tsconfig command to get/set hwtstamp config")
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250922231924.2769571-1-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.17-rc7).
No conflicts.
Adjacent changes:
drivers/net/ethernet/mellanox/mlx5/core/en/fs.h
9536fbe10c ("net/mlx5e: Add PSP steering in local NIC RX")
7601a0a462 ("net/mlx5e: Add a miss level for ipsec crypto offload")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor rss_set_prep_indir() to utilize the new
ethtool_get_rx_ring_count() helper for determining the number of RX
rings, replacing the direct use of get_rxnfc with ETHTOOL_GRXRINGS.
This ensures compatibility with both legacy and new ethtool_ops
interfaces by transparently multiplexing between them.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250917-gxrings-v4-7-dae520e2e1cb@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Modify ethtool_set_rxfh() to use the new ethtool_get_rx_ring_count()
helper function for retrieving the number of RX rings instead of
directly calling get_rxnfc with ETHTOOL_GRXRINGS.
This way, we can leverage the new helper if it is available in ethtool_ops.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250917-gxrings-v4-6-dae520e2e1cb@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Modify ethtool_set_rxfh() to use the new ethtool_get_rx_ring_count()
helper function for retrieving the number of RX rings instead of
directly calling get_rxnfc with ETHTOOL_GRXRINGS.
This way, we can leverage the new helper if it is available in ethtool_ops.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250917-gxrings-v4-5-dae520e2e1cb@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new optional get_rx_ring_count callback in ethtool_ops to allow
drivers to provide the number of RX rings directly without going through
the full get_rxnfc flow classification interface.
Create ethtool_get_rx_ring_count() to use .get_rx_ring_count if
available, falling back to get_rxnfc() otherwise. It needs to be
non-static, given it will be called by other ethtool functions laters,
as those calling get_rxfh().
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250917-gxrings-v4-4-dae520e2e1cb@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethtool_get_rxrings() was a copy of ethtool_get_rxnfc(). Clean the code
that will never be executed for GRXRINGS specifically.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250917-gxrings-v4-3-dae520e2e1cb@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds handling for the ETHTOOL_GRXRINGS ioctl command in the
ethtool ioctl dispatcher. It introduces a new helper function
ethtool_get_rxrings() that calls the driver's get_rxnfc() callback with
appropriate parameters to retrieve the number of RX rings supported
by the device.
By explicitly handling ETHTOOL_GRXRINGS, userspace queries through
ethtool can now obtain RX ring information in a structured manner.
In this patch, ethtool_get_rxrings() is a simply copy of
ethtool_get_rxnfc().
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250917-gxrings-v4-2-dae520e2e1cb@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Modify ethtool_copy_validate_indir() and callers to validate indirection
table entries against the number of RX rings as an integer instead of
accessing rx_rings->data.
This will be useful in the future, given that struct ethtool_rxnfc might
not exist for native GRXRINGS call.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250917-gxrings-v4-1-dae520e2e1cb@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Network drivers sometimes return -EOPNOTSUPP from their get_ts_info()
method, and this should not cause the reporting of PHY timestamping
information to be prohibited. Handle this error code, and also
arrange for ethtool_net_get_ts_info_by_phc() to return -EOPNOTSUPP
when the method is not implemented.
This allows e.g. PHYs connected to DSA switches which support
timestamping to report their timestamping capabilities.
Fixes: b9e3f7dc9e ("net: ethtool: tsinfo: Enhance tsinfo to support several hwtstamp by net topology")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/E1uwiW3-00000004jRF-3CnC@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some modern NICs support including the IPv6 Flow Label in
the flow hash for RSS queue selection. This is outside
the old "Microsoft spec", but was included in the OCP NIC spec:
[ ] RSS include flow label in the hash (configurable)
https://www.opencompute.org/w/index.php?title=Core_Offloads#Receive_Side_Scaling
RSS Flow Label hashing allows TCP Protective Load Balancing (PLB)
to recover from receiver congestion / overload.
Rx CPU/queue hotspots are relatively common for data ingest
workloads, and so far we had to try to detect the condition
at the RPC layer and reopen the connection. PLB lets us change
the Flow Label and therefore Rx CPU on RTO, with minimal packet
reordering. PLB reaction times are much faster, and can happen
at any point in the connection, not just at RPC boundaries.
Due to the nature of host processing (relatively long queues,
other kernel subsystems masking IRQs for 100s of msecs)
the risk of reordering within the host is higher than in
the network. But for applications which need it - it is far
preferable to potentially persistent overload of subset of
queues.
It is expected that the hash communicated to the host
may change if the Flow Label changes. This may be surprising
to some host software, but I don't expect the devices
can compute two Toeplitz hashes, one with the Flow Label
for queue selection and one without for the rx hash
communicated to the host. Besides, changing the hash
may potentially help to change the path thru host queues.
User can disable NETIF_F_RXHASH if they require a stable
flow hash.
The name RXH_IP6_FL was chosen based on what we call
Flow Label variables in IPv6 processing (fl). I prefer
fl_lbl but that appears to be an fbnic-only spelling.
We could spell out RXH_IP6_FLOW_LABEL but existing
RXH_ defines are a lot more terse.
Willem notes [1] that Flow Label is defined as identifying the flow
and therefore including both the flow label _and_ the L4 header
fields is not generally necessary. But it should not hurt so
it's not explicitly prevented if the driver supports hashing
on both at the same time.
Link: https://lore.kernel.org/68483433b45e2_3cd66f29440@willemb.c.googlers.com.notmuch [1]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250811234212.580748-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement removing additional RSS contexts via Netlink.
Technically it'd be possible to shoehorn the delete operation
into ethnl_request_ops-compatible handler. The code ends
up longer than open coded version, and I think we'll need
a custom way of sending notifications at some stage (if we
allow tying the context lifetime to the netlink socket, in
the future).
Link: https://patch.msgid.link/20250717234343.2328602-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support creating contexts via Netlink. Setting flow hashing
fields on the new context is not supported at this stage,
it can be added later.
An empty indirection table is not supported. This is a carry
over from the IOCTL interface where empty indirection table
meant delete. We can repurpose empty indirection table in
Netlink but for now to avoid confusion reject it using the
policy.
Support letting user choose the ID for the new context. This was
not possible in IOCTL since the context ID field for the create
action had to be set to the ETH_RXFH_CONTEXT_ALLOC magic value.
Link: https://patch.msgid.link/20250717234343.2328602-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similarly to previous change, factor out populating the response.
We will use this after the context was allocated to send a notification
so this time factor out from the additional context handling, rather
than context 0 handling (for request context didn't exist, for response
it does).
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250717234343.2328602-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To ease the code reuse for RSS_CREATE we'll want to prepare
struct rss_reply_data for the new context. Unfortunately
we can't depend on the exiting scaffolding because the context
doesn't exist (ctx=NULL) when we start preparing. Factor out
the portion of the context 0 handling responsible for allocation
of request memory, so that we can call it directly.
Link: https://patch.msgid.link/20250717234343.2328602-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In anticipation for CREATE and DELETE notifications - explicitly
pass the notification type to ethtool_rss_notify(), when calling
from the IOCTL code.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250717234343.2328602-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Supporting per-RSS context configuration of hashing fields but
not the hashing algorithm would complicate the code a lot.
We'd need to cross check the config against all RSS contexts.
None of the drivers need this today, so explicitly prevent
new drivers with such skewed capabilities from registering.
If such driver appears it will need to first adjust the checks
in the core.
Link: https://patch.msgid.link/20250717234343.2328602-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for ETHTOOL_SRXFH (setting hashing fields) in RSS_SET.
The tricky part is dealing with symmetric hashing. In netlink user
can change the hashing fields and symmetric hash in one request,
in IOCTL the two used to be set via different uAPI requests.
Since fields and hash function config are still separate driver
callbacks - changes to the two are not atomic. Keep things simple
and validate the settings against both pre- and post- change ones.
Meaning that we will reject the config request if user tries
to correct the flow fields and set input_xfrm in one request,
or disables input_xfrm and makes flow fields non-symmetric.
We can adjust it later if there's a real need. Starting simple feels
right, and potentially partially applying the settings isn't nice,
either.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250716000331.1378807-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support configuring symmetric hashing via Netlink.
We have the flow field config prepared as part of SET handling,
so scan it for conflicts instead of querying the driver again.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250716000331.1378807-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support setting RSS hashing key via ethtool Netlink.
Use the Netlink policy to make sure user doesn't pass
an empty key, "resetting" the key is not a thing.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250716000331.1378807-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support setting RSS hash function / algo via ethtool Netlink.
Like IOCTL we don't validate that the function is within the
range known to the kernel. The drivers do a pretty good job
validating the inputs, and the IDs are technically "dynamically
queried" rather than part of uAPI.
Only change should be that in Netlink we don't support user
explicitly passing ETH_RSS_HASH_NO_CHANGE (0), if no change
is requested the attribute should be absent.
The ETH_RSS_HASH_NO_CHANGE is retained in driver-facing
API for consistency (not that I see a strong reason for it).
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250716000331.1378807-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add initial support for RSS_SET, for now only operations on
the indirection table are supported.
Unlike the ioctl don't check if at least one parameter is
being changed. This is how other ethtool-nl ops behave,
so pick the ethtool-nl consistency vs copying ioctl behavior.
There are two special cases here:
1) resetting the table to defaults;
2) support for tables of different size.
For (1) I use an empty Netlink attribute (array of size 0).
(2) may require some background. AFAICT a lot of modern devices
allow allocating RSS tables of different sizes. mlx5 can upsize
its tables, bnxt has some "table size calculation", and Intel
folks asked about RSS table sizing in context of resource allocation
in the past. The ethtool IOCTL API has a concept of table size,
but right now the user is expected to provide a table exactly
the size the device requests. Some drivers may change the table
size at runtime (in response to queue count changes) but the
user is not in control of this. What's not great is that all
RSS contexts share the same table size. For example a device
with 128 queues enabled, 16 RSS contexts 8 queues in each will
likely have 256 entry tables for each of the 16 contexts,
while 32 would be more than enough given each context only has
8 queues. To address this the Netlink API should avoid enforcing
table size at the uAPI level, and should allow the user to express
the min table size they expect.
To fully solve (2) we will need more driver plumbing but
at the uAPI level this patch allows the user to specify
a table size smaller than what the device advertises. The device
table size must be a multiple of the user requested table size.
We then replicate the user-provided table to fill the full device
size table. This addresses the "allow the user to express the min
table size" objective, while not enforcing any fixed size.
From Netlink perspective .get_rxfh_indir_size() is now de facto
the "max" table size supported by the device.
We may choose to support table replication in ethtool, too,
when we actually plumb this thru the device APIs.
Initially I was considering moving full pattern generation
to the kernel (which queues to use, at which frequency and
what min sequence length). I don't think this complexity
would buy us much and most if not all devices have pow-2
table sizes, which simplifies the replication a lot.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The requirement of ->get_rxfh_fields() in ethtool_set_rxfh() is there to
verify that we have no conflict of input_xfrm with the RSS fields
options, there is no point in doing it if input_xfrm is not
supported/requested.
This is under the assumption that a driver that supports input_xfrm will
also support ->get_rxfh_fields(), so add a WARN_ON() to
ethtool_check_ops() to verify it, and remove the op NULL check.
This fixes the following error in mlx4_en, which doesn't support
getting/setting RXFH fields.
$ ethtool --set-rxfh-indir eth2 hfunc xor
Cannot set RX flow hash configuration: Operation not supported
Fixes: 72792461c8 ("net: ethtool: don't mux RXFH via rxnfc callbacks")
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250715140754.489677-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement ETHTOOL_GRXFH over Netlink. The number of flow types is
reasonable (around 20) so report all of them at once for simplicity.
Do not maintain the flow ID mapping with ioctl at the uAPI level.
This gives us a chance to clean up the confusion that come from
RxNFC vs RxFH (flow direction vs hashing) in the ioctl.
Try to align with the names used in ethtool CLI, they seem to have
stood the test of time just fine. One annoyance is that we still
call L4 ports the weird names, but I guess they also apply to IPSec
(where they cover the SPI) so it is what it is.
$ ynl --family ethtool --dump rss-get
{
"header": {
"dev-index": 1,
"dev-name": "enp1s0"
},
"hfunc": 1,
"hkey": b"...",
"indir": [0, 1, ...],
"flow-hash": {
"ether": {"l2da"},
"ah-esp4": {"ip-src", "ip-dst"},
"ah-esp6": {"ip-src", "ip-dst"},
"ah4": {"ip-src", "ip-dst"},
"ah6": {"ip-src", "ip-dst"},
"esp4": {"ip-src", "ip-dst"},
"esp6": {"ip-src", "ip-dst"},
"ip4": {"ip-src", "ip-dst"},
"ip6": {"ip-src", "ip-dst"},
"sctp4": {"ip-src", "ip-dst"},
"sctp6": {"ip-src", "ip-dst"},
"udp4": {"ip-src", "ip-dst"},
"udp6": {"ip-src", "ip-dst"}
"tcp4": {"l4-b-0-1", "l4-b-2-3", "ip-src", "ip-dst"},
"tcp6": {"l4-b-0-1", "l4-b-2-3", "ip-src", "ip-dst"},
},
}
Link: https://patch.msgid.link/20250708220640.2738464-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Looks like some drivers (ena, enetc, fbnic.. there's probably more)
consider ETHER_FLOW to be legitimate target for flow hashing.
I'm not sure how intentional that is from the uAPI perspective
vs just an effect of ethtool IOCTL doing minimal input validation.
But Netlink will do strict validation, so we need to decide whether
we allow this use case or not. I don't see a strong reason against
it, and rejecting it would potentially regress a number of drivers.
So update the comments and flow_type_hashable().
Link: https://patch.msgid.link/20250708220640.2738464-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 040cef30b5 ("net: ethtool: move get_rxfh callback
under the rss_lock") we're expected to take rss_lock around get.
Switch dump to using the new prep helper and move the locking into it.
Link: https://patch.msgid.link/20250708220640.2738464-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that we don't have the compat code we can reduce the indent
a little. No functional changes.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20250707184115.2285277-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All drivers are now converted to dedicated _rxfh_context ops.
Remove the use of >set_rxfh() to manage additional contexts.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20250707184115.2285277-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido spotted that I made a mistake in commit under Fixes,
ethnl_default_parse() may acquire a dev reference even when it returns
an error. This may have been driven by the code structure in dumps
(which unconditionally release dev before handling errors), but it's
too much of a trap. Functions should undo what they did before returning
an error, rather than expecting caller to clean up.
Rather than fixing ethnl_default_set_doit() directly make
ethnl_default_parse() clean up errors.
Reported-by: Ido Schimmel <idosch@idosch.org>
Link: https://lore.kernel.org/aGEPszpq9eojNF4Y@shredder
Fixes: 963781bdfe ("net: ethtool: call .parse_request for SET handlers")
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250630154053.1074664-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We already call get_rxfh under the rss_lock when we read back
context state after changes. Let's be consistent and always
hold the lock. The existing callers are all under rtnl_lock
so this should make no difference in practice, but it makes
the locking rules far less confusing IMHO. Any RSS callback
and any access to the RSS XArray should hold the lock.
Link: https://patch.msgid.link/20250626202848.104457-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netlink code will want to perform the RSS_SET operation atomically
under the rss_lock. sfc wants to hold the rss_lock in rxfh_fields_get,
which makes that difficult. Lets move the locking up to the core
so that for all driver-facing callbacks rss_lock is taken consistently
by the core.
Link: https://patch.msgid.link/20250626202848.104457-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Always take the rss_lock in ethtool_set_rxfh(). We will want to
make a similar change in ethtool_set_rxfh_fields() and some
drivers lock that callback regardless of rss context ID being set.
Having some callbacks locked unconditionally and some only if
context ID is set would be very confusing.
ethtool handling is under rtnl_lock, so rss_lock is very unlikely
to ever be congested.
Link: https://patch.msgid.link/20250626202848.104457-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We now reuse .parse_request() from GET on SET, so we need to make sure
that the policies for both cover the attributes used for .parse_request().
genetlink will only allocate space in info->attrs for ARRAY_SIZE(policy).
Reported-by: syzbot+430f9f76633641a62217@syzkaller.appspotmail.com
Fixes: 963781bdfe ("net: ethtool: call .parse_request for SET handlers")
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250626233926.199801-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for RSS_SET handling in ethnl introduce Netlink
notifications for RSS. Only cover modifications, not creation
and not removal of a context, because the latter may deserve
a different notification type. We should cross that bridge
when we add the support for context add / remove via Netlink.
Link: https://patch.msgid.link/20250623231720.3124717-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Copy information parsed for SET with .req_parse to NTF handling
and therefore the GET-equivalent that it ends up executing.
This way if the SET was on a sub-object (like RSS context)
the notification will also be appropriately scoped.
Also copy the phy_index, Maxime suggests this will help PLCA
commands generate accurate notifications as well.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250623231720.3124717-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethtool_notify() takes a const void *data argument, which presumably
was intended to pass information from the call site to the subcommand
handler. This argument currently has no users.
Expecting the data to be subcommand-specific has two complications.
Complication #1 is that its not plumbed thru any of the standardized
callbacks. It gets propagated to ethnl_default_notify() where it
remains unused. Coming from the ethnl_default_set_doit() side we pass
in NULL, because how could we have a command specific attribute in
a generic handler.
Complication #2 is that we expect the ethtool_notify() callers to
know what attribute type to pass in. Again, the data pointer is
untyped.
RSS will need to pass the context ID to the notifications.
I think it's a better design if the "subcommand" exports its own
typed interface and constructs the appropriate argument struct
(which will be req_info). Remove the unused data argument from
ethtool_notify() but retain it in a new internal helper which
subcommands can use to build a typed interface.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250623231720.3124717-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for using req_info to carry parameters between SET
and NTF - call .parse_request during ethnl_default_set_doit().
The main question here is whether .parse_request is intended to be
GET-specific. Originally the SET handling was delegated to each subcommand
directly - ethnl_default_set_doit() and .set callbacks in ethnl_request_ops
did not exist. Looking at existing users does not shed much light, all
of the following subcommands use .parse_request but have no SET handler
(and no NTF):
net/ethtool/eeprom.c
net/ethtool/rss.c
net/ethtool/stats.c
net/ethtool/strset.c
net/ethtool/tsinfo.c
There's only one which does have a SET:
net/ethtool/pause.c
where .parse_request handling is used to select which statistics to query.
Not relevant for SET but also harmless.
Going back to RSS (which doesn't have SET today) .parse_request parses
the rss_context ID. Using the req_info struct to pass the context ID
from SET to NTF will be very useful.
Switch to ethnl_default_parse(), effectively adding the .parse_request
for SET handlers.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250623231720.3124717-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for using req_info to carry parameters between
SET and NTF allocate a full request info struct. Since the size
depends on the subcommand we need to allocate it on the heap.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250623231720.3124717-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All drivers have been converted. Stop using the rxnfc fallbacks
for Rx Flow Hashing configuration.
Joe pointed out in earlier review that in ethtool_set_rxfh()
we need both .get_rxnfc and .get_rxfh_fields, because we need
both the ring count and flow hashing (because we call
ethtool_check_flow_types()). IOW the existing check added
for transitioning drivers was buggy.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250618203823.1336156-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch expands the status information provided by ethtool for PSE c33
with current port priority and max port priority. It also adds a call to
pse_ethtool_set_prio() to configure the PSE port priority.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-8-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Report the index of the newly introduced PSE power domain to the user,
enabling improved management of the power budget for PSE devices.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-5-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for devm_pse_irq_helper() to register PSE interrupts and report
events such as over-current or over-temperature conditions. This follows a
similar approach to the regulator API but also sends notifications using a
dedicated PSE ethtool netlink socket.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-2-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We mux multiple calls to the drivers via the .get_nfc and .set_nfc
callbacks. This is slightly inconvenient to the drivers as they
have to de-mux them back. It will also be awkward for netlink code
to construct struct ethtool_rxnfc when it wants to get info about
RX Flow Hash, from the RSS module.
Add dedicated driver callbacks. Create struct ethtool_rxfh_fields
which contains only data relevant to RXFH. Maintain the names of
the fields to avoid having to heavily modify the drivers.
For now support both callbacks, once all drivers are converted
ethtool_*et_rxfh_fields() will stop using the rxnfc callbacks.
Link: https://patch.msgid.link/20250611145949.2674086-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RX Flow Hashing supports using different configuration for different
RSS contexts. Only two drivers seem to support it. Make sure we
uniformly error out for drivers which don't.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250611145949.2674086-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the handles have been separated - remove the RX Flow Hash
handling from rxnfc functions and vice versa.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250611145949.2674086-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RX Flow Hash configuration uses the same argument structure
as flow filters. This is probably why ethtool IOCTL handles
them together. The more checks we add the more convoluted
this code is getting (as some of the checks apply only
to flow filters and others only to the hashing).
Copy the code to separate the handling. This is an exact
copy, the next change will remove unnecessary handling.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250611145949.2674086-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD
Current release - new code bugs:
- eth: airoha: correct enable mask for RX queues 16-31
- veth: prevent NULL pointer dereference in veth_xdp_rcv when peer
disappears under traffic
- ipv6: move fib6_config_validate() to ip6_route_add(), prevent invalid
routes
Previous releases - regressions:
- phy: phy_caps: don't skip better duplex match on non-exact match
- dsa: b53: fix untagged traffic sent via cpu tagged with VID 0
- Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused transient
packet loss, exact reason not fully understood, yet
Previous releases - always broken:
- net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6)
- sched: sfq: fix a potential crash on gso_skb handling
- Bluetooth: intel: improve rx buffer posting to avoid causing issues
in the firmware
- eth: intel: i40e: make reset handling robust against multiple requests
- eth: mlx5: ensure FW pages are always allocated on the local NUMA
node, even when device is configure to 'serve' another node
- wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850,
prevent kernel crashes
- wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
for 3 sec if fw_stats_done is not set
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0mtm
-----END PGP SIGNATURE-----
Merge tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and wireless.
Current release - regressions:
- af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD
Current release - new code bugs:
- eth: airoha: correct enable mask for RX queues 16-31
- veth: prevent NULL pointer dereference in veth_xdp_rcv when peer
disappears under traffic
- ipv6: move fib6_config_validate() to ip6_route_add(), prevent
invalid routes
Previous releases - regressions:
- phy: phy_caps: don't skip better duplex match on non-exact match
- dsa: b53: fix untagged traffic sent via cpu tagged with VID 0
- Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused
transient packet loss, exact reason not fully understood, yet
Previous releases - always broken:
- net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6)
- sched: sfq: fix a potential crash on gso_skb handling
- Bluetooth: intel: improve rx buffer posting to avoid causing issues
in the firmware
- eth: intel: i40e: make reset handling robust against multiple
requests
- eth: mlx5: ensure FW pages are always allocated on the local NUMA
node, even when device is configure to 'serve' another node
- wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850,
prevent kernel crashes
- wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
for 3 sec if fw_stats_done is not set"
* tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context
net: ethtool: Don't check if RSS context exists in case of context 0
af_unix: Allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD.
ipv6: Move fib6_config_validate() to ip6_route_add().
net: drv: netdevsim: don't napi_complete() from netpoll
net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get()
veth: prevent NULL pointer dereference in veth_xdp_rcv
net_sched: remove qdisc_tree_flush_backlog()
net_sched: ets: fix a race in ets_qdisc_change()
net_sched: tbf: fix a race in tbf_change()
net_sched: red: fix a race in __red_change()
net_sched: prio: fix a race in prio_tune()
net_sched: sch_sfq: reject invalid perturb period
net: phy: phy_caps: Don't skip better duplex macth on non-exact match
MAINTAINERS: Update Kuniyuki Iwashima's email address.
selftests: net: add test case for NAT46 looping back dst
net: clear the dst when changing skb protocol
net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_oper
net/mlx5e: Fix leak of Geneve TLV option object
net/mlx5: HWS, make sure the uplink is the last destination
...
Context 0 (default context) always exists, there is no need to check
whether it exists or not when adding a flow steering rule.
The existing check fails when creating a flow steering rule for context
0 as it is not stored in the rss_ctx xarray.
For example:
$ ethtool --config-ntuple eth2 flow-type tcp4 dst-ip 194.237.147.23 dst-port 19983 context 0 loc 618
rmgr: Cannot insert RX class rule: Invalid argument
Cannot insert classification rule
An example usecase for this could be:
- A high-priority rule (loc 0) directing specific port traffic to
context 0.
- A low-priority rule (loc 1) directing all other TCP traffic to context
1.
This is a user-visible regression that was caught in our testing
environment, it was not reported by a user yet.
Fixes: de7f7582df ("net: ethtool: prevent flow steering to RSS contexts which don't exist")
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20250612071958.1696361-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
Multi-PTP source support within a network topology has been merged,
but the hardware timestamp source is not yet exposed to users.
Currently, users only see the PTP index, which does not indicate
whether the timestamp comes from a PHY or a MAC.
Add support for reporting the hwtstamp source using a
hwtstamp-source field, alongside hwtstamp-phyindex, to describe
the origin of the hardware timestamp.
Remove HWTSTAMP_SOURCE_UNSPEC enum value as it is not used at all.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250519-feature_ptp_source-v4-1-5d10e19a0265@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Symmetric RSS hash requires that:
* No other fields besides IP src/dst and/or L4 src/dst are set
* If src is set, dst must also be set
This restriction was only enforced when RXNFC was configured after
symmetric hash was enabled. In the opposite order of operations (RXNFC
then symmetric enablement) the check was not performed.
Perform the sanity check on set_rxfh as well, by iterating over all flow
types hash fields and making sure they are all symmetric.
Introduce a function that returns whether a flow type is hashable (not
spec only) and needs to be iterated over. To make sure that no one
forgets to update the list of hashable flow types when adding new flow
types, a static assert is added to draw the developer's attention.
The conversion of uapi #defines to enum is not ideal, but as Jakub
mentioned [1], we have precedent for that.
[1] https://lore.kernel.org/netdev/20250324073509.6571ade3@kernel.org/
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250508103034.885536-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that we have an infrastructure in ethnl for perphy DUMPs, we can get
rid of the custom ->doit and ->dumpit to deal with PHY listing commands.
As most of the code was custom, this basically means re-writing how we
deal with PHY listing.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250502085242.248645-3-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethnl commands that target a phy_device need a DUMP implementation that
will fill the reply for every PHY behind a netdev. We therefore need to
iterate over the dev->topo to list them.
When multiple PHYs are behind the same netdev, it's also useful to
perform DUMP with a filter on a given netdev, to get the capability of
every PHY.
Implement dedicated genl ->start(), ->dumpit() and ->done() operations
for PHY-targetting command, allowing filtered dumps and using a dump
context that keep track of the PHY iteration for multi-message dump.
PSE-PD and PLCA are converted to this new set of ops along the way.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250502085242.248645-2-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the link partner goes down, "ethtool --show-mm" still displays
"Verification status: SUCCEEDED," reflecting a previous state that is
no longer valid.
Reset the verification status to ensure it reflects the current state.
Reviewed-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
It appears that stmmac is not the only hardware which requires a
software-driven verification state machine for the MAC Merge layer.
While on the one hand it's good to encourage hardware implementations,
on the other hand it's quite difficult to tolerate multiple drivers
implementing independently fairly non-trivial logic.
Extract the hardware-independent logic from stmmac into library code and
put it in ethtool. Name the state structure "mmsv" for MAC Merge
Software Verification. Let this expose an operations structure for
executing the hardware stuff: sync hardware with the tx_active boolean
(result of verification process), enable/disable the pMAC, send mPackets,
notify library of external events (reception of mPackets), as well as
link state changes.
Note that it is assumed that the external events are received in hardirq
context. If they are not, it is probably a good idea to disable hardirqs
when calling ethtool_mmsv_event_handle(), because the library does not
do so.
Also, the MM software verification process has no business with the
tx_min_frag_size, that is all the driver's to handle.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Co-developed-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Tested-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The 'read_write_len_ext' field in 'struct ethtool_cmis_cdb_cmd_args'
stores the maximum number of bytes that can be read from or written to
the Local Payload (LPL) page in a single multi-byte access.
Cited commit started overwriting this field with the maximum number of
bytes that can be read from or written to the Extended Payload (LPL)
pages in a single multi-byte access. Transceiver modules that support
auto paging can advertise a number larger than 255 which is problematic
as 'read_write_len_ext' is a 'u8', resulting in the number getting
truncated and firmware flashing failing [1].
Fix by ignoring the maximum EPL access size as the kernel does not
currently support auto paging (even if the transceiver module does) and
will not try to read / write more than 128 bytes at once.
[1]
Transceiver module firmware flashing started for device enp177s0np0
Transceiver module firmware flashing in progress for device enp177s0np0
Progress: 0%
Transceiver module firmware flashing encountered an error for device enp177s0np0
Status message: Write FW block EPL command failed, LPL length is longer
than CDB read write length extension allows.
Fixes: 9a3b0d078b ("net: ethtool: Add support for writing firmware blocks using EPL payload")
Reported-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Closes: https://lore.kernel.org/netdev/20250402183123.321036-3-michael.chan@broadcom.com/
Tested-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250409112440.365672-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There's a consistent pattern where the .cleanup_data() callback is
called when .prepare_data() fails, when it should really be called to
clean after a successful .prepare_data() as per the documentation.
Rewrite the error-handling paths to make sure we don't cleanup
un-prepared data.
Fixes: c781ff12a2 ("ethtool: Allow network drivers to dump arbitrary EEPROM data")
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250407130511.75621-1-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When hds-thresh is configured, ethnl_set_rings() is called, and it calls
ethtool_ringparam_get_cfg() to get ringparameters from .get_ringparam()
callback and dev->cfg.
Both hds_config and hds_thresh values should be set from dev->cfg, not
from .get_ringparam().
But ethtool_ringparam_get_cfg() sets only hds_config from dev->cfg.
So, ethtool_ringparam_get_cfg() returns always a hds_thresh as 0.
If an input value of hds-thresh is 0, a hds_thresh value from
ethtool_ringparam_get_cfg() are same. So ethnl_set_rings() does
nothing and returns immediately.
It causes a bug that setting a hds-thresh value to 0 is not working.
Reproducer:
modprobe netdevsim
echo 1 > /sys/bus/netdevsim/new_device
ethtool -G eth0 hds-thresh 100
ethtool -G eth0 hds-thresh 0
ethtool -g eth0
#hds-thresh value should be 0, but it shows 100.
The tools/testing/selftests/drivers/net/hds.py can test it too with
applying a following patch for hds.py.
Fixes: 928459bbda ("net: ethtool: populate the default HDS params in the core")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250404122126.1555648-2-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add SOF_TIMESTAMPING_TX_COMPLETION, for requesting a software timestamp
when hardware reports a packet completed.
Completion tstamp is useful for Bluetooth, as hardware timestamps do not
exist in the HCI specification except for ISO packets, and the hardware
has a queue where packets may wait. In this case the software SND
timestamp only reflects the kernel-side part of the total latency
(usually small) and queue length (usually 0 unless HW buffers
congested), whereas the completion report time is more informative of
the true latency.
It may also be useful in other cases where HW TX timestamps cannot be
obtained and user wants to estimate an upper bound to when the TX
probably happened.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
link_mode_params contains a lookup table of all 802.3 link modes that
are currently supported with structured data about each mode's speed,
duplex, number of lanes and mediums.
As a preparation for a port representation, export that table for the
rest of the net stack to use.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-2-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Handling the CWR flag differs between RFC 3168 ECN and AccECN.
With RFC 3168 ECN aware TSO (NETIF_F_TSO_ECN) CWR flag is cleared
starting from 2nd segment which is incompatible how AccECN handles
the CWR flag. Such super-segments are indicated by SKB_GSO_TCP_ECN.
With AccECN, CWR flag (or more accurately, the ACE field that also
includes ECE & AE flags) changes only when new packet(s) with CE
mark arrives so the flag should not be changed within a super-skb.
The new skb/feature flags are necessary to prevent such TSO engines
corrupting AccECN ACE counters by clearing the CWR flag (if the
CWR handling feature cannot be turned off).
If NIC is completely unaware of RFC3168 ECN (doesn't support
NETIF_F_TSO_ECN) or its TSO engine can be set to not touch CWR flag
despite supporting also NETIF_F_TSO_ECN, TSO could be safely used
with AccECN on such NIC. This should be evaluated per NIC basis
(not done in this patch series for any NICs).
For the cases, where TSO cannot keep its hands off the CWR flag,
a GSO fallback is provided by this patch.
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
tools/testing/selftests/drivers/net/ping.py
75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
de94e86974 ("selftests: drv-net: store addresses in dict indexed by ipver")
https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/
net/core/devmem.c
a70f891e0f ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()")
1d22d3060b ("net: drop rtnl_lock for queue_mgmt operations")
https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/
Adjacent changes:
tools/testing/selftests/net/Makefile
6f50175cca ("selftests: Add IPv6 link-local address generation tests for GRE devices.")
2e5584e0f9 ("selftests/net: expand cmsg_ipv6.sh with ipv4")
drivers/net/ethernet/broadcom/bnxt/bnxt.c
661958552e ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic")
fe96d717d3 ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix missing initialization of ts_info->phc_index in the dump command,
which could cause a netdev interface to incorrectly display a PTP provider
at index 0 instead of "none".
Fix it by initializing the phc_index to -1.
In the same time, restore missing initialization of ts_info.cmd for the
IOCTL case, as it was before the transition from ethnl_default_dumpit to
custom ethnl_tsinfo_dumpit.
Also, remove unnecessary zeroing of ts_info, as it is embedded within
reply_data, which is fully zeroed two lines earlier.
Fixes: b9e3f7dc9e ("net: ethtool: tsinfo: Enhance tsinfo to support several hwtstamp by net topology")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250307091255.463559-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the more esoteric helpers for netdev instance lock to
a dedicated header. This avoids growing netdevice.h to infinity
and makes rebuilding the kernel much faster (after touching
the header with the helpers).
The main netdev_lock() / netdev_unlock() functions are used
in static inlines in netdevice.h and will probably be used
most commonly, so keep them in netdevice.h.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250307183006.2312761-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
net/ethtool/cabletest.c
2bcf4772e4 ("net: ethtool: try to protect all callback with netdev instance lock")
637399bf7e ("net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device")
No Adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
