Heiko Carstens says:
===================
This is supposed to improve s390 idle time accounting, and brings it
back to the state it was before arch_cpu_idle_time() was removed from
s390 [3].
In result all cpu time accounting is done by the s390 architecture backend
again, instead of having a mix of architecure specific and common code
accounting (common code: idle, s390 architecture: everything else).
===================
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
- Use CIO device online variable instead of the internal FSM state to
determine device availability during purge operations
- Remove extra check of task_stack_page() because try_get_task_stack()
already takes care of that when reading /proc/<pid>/wchan
- Allow user-space to use the new SCLP action qualifier 4 for to
provide NVMe SMART log data to the platform.
- Send AP CHANGE uevents on successful bind and successful association
to notify user-space about SE operations on AP queue devices
- Add an s390dbf kernel parameter to configure debug log levels and
area sizes during early boot
- On arm64 the empty zero page is going to be mapped read-only.
Do the same for s390 with an explicit set_memory_ro() call
- Improve s390-specific bcr_serialize() and cpu_relax() implementations
- Remove all unused variables to avoid allmodconfig W=1 build fails
with latest clang-23
- Cleanup default Kconfig values for s390 selftests
- Add a s390-tod trace clock to allow comparing trace timestamps
between different systems or virtual machines on s390
- Remove the s390 implementation of strlcat() in favor of the
generic variant
- Make consistent the calling order between page_table_check_pte_clear()
and secure page conversion across all code paths
- Rearrange some fields within AP and zcrypt structs to reduce
memory consumption and unused holes
- Shorten GR_NUM and VX_NUM macros and move them to a separate header
- Replace __get_free_page() with kmalloc() in few sources
- Introduce an infrastructure for more efficient this_cpu operations.
Eliminate conditional branches when PREEMPT_NONE is removed
- Enable Rust support
- Use z10 as minimum architecture level, similar to the boot code,
to enforce a defined architecture level set
- Improve and convert various mem*() helper functions to C. For that
add .noinstr.text section to avoid orphaned warnings from the linker
- Fix the function pointer type in __ret_from_fork() to correct
the indirect call to match kernel thread return type of int
- Revert support for DCACHE_WORD_ACCESS to avoid an endless exception
loop on read from donated Ultravisor pages at unaligned addresses
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCai/rTRccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8KNOAPwMpGVtXcKF4HftCv49X0WpqKbU
tdYO9hbq9wanIGpgIgEAk5vggxe74pj+palTbtCDteVjDpnSp811x8gfmLlPrgU=
=qzZ2
-----END PGP SIGNATURE-----
Merge tag 's390-7.2-1' of gitolite.kernel.org:pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Use CIO device online variable instead of the internal FSM state to
determine device availability during purge operations
- Remove extra check of task_stack_page() because try_get_task_stack()
already takes care of that when reading /proc/<pid>/wchan
- Allow user-space to use the new SCLP action qualifier 4 for to
provide NVMe SMART log data to the platform.
- Send AP CHANGE uevents on successful bind and successful association
to notify user-space about SE operations on AP queue devices
- Add an s390dbf kernel parameter to configure debug log levels and
area sizes during early boot
- On arm64 the empty zero page is going to be mapped read-only. Do the
same for s390 with an explicit set_memory_ro() call
- Improve s390-specific bcr_serialize() and cpu_relax() implementations
- Remove all unused variables to avoid allmodconfig W=1 build fails
with latest clang-23
- Cleanup default Kconfig values for s390 selftests
- Add a s390-tod trace clock to allow comparing trace timestamps
between different systems or virtual machines on s390
- Remove the s390 implementation of strlcat() in favor of the generic
variant
- Make consistent the calling order between
page_table_check_pte_clear() and secure page conversion across all
code paths
- Rearrange some fields within AP and zcrypt structs to reduce memory
consumption and unused holes
- Shorten GR_NUM and VX_NUM macros and move them to a separate header
- Replace __get_free_page() with kmalloc() in few sources
- Introduce an infrastructure for more efficient this_cpu operations.
Eliminate conditional branches when PREEMPT_NONE is removed
- Enable Rust support
- Use z10 as minimum architecture level, similar to the boot code, to
enforce a defined architecture level set
- Improve and convert various mem*() helper functions to C. For that
add .noinstr.text section to avoid orphaned warnings from the linker
- Fix the function pointer type in __ret_from_fork() to correct the
indirect call to match kernel thread return type of int
- Revert support for DCACHE_WORD_ACCESS to avoid an endless exception
loop on read from donated Ultravisor pages at unaligned addresses
* tag 's390-7.2-1' of gitolite.kernel.org:pub/scm/linux/kernel/git/s390/linux: (52 commits)
s390: Revert support for DCACHE_WORD_ACCESS
s390/process: Fix kernel thread function pointer type
s390/tishift: Convert __ashlti3(), __ashrti3(), __lshrti3() to C
s390/memmove: Optimize backward copy case
s390/string: Convert memset(16|32|64)() to C
s390/string: Convert memcpy() to C
s390/string: Convert memset() to C
s390/string: Convert memmove() to C
s390/string: Add -ffreestanding compile option to string.o
s390: Add .noinstr.text to boot and purgatory linker scripts
s390/purgatory: Enforce z10 minimum architecture level
s390: Enable Rust support
s390/cmpxchg: Fix KASAN stack-out-of-bounds in atomic helpers
rust: helpers: Add memchr wrapper for string operations
rust/bindgen_parameters: Mark s390 types as opaque to prevent repr conflicts
s390/jump_label: Implement ARCH_STATIC_BRANCH_JUMP_ASM and ARCH_STATIC_BRANCH_ASM macros
s390/bug: Provide ARCH_WARN_ASM for Rust WARN/BUG support
s390/ap: Fix locking issue in SE bind and associate sysfs functions
s390/percpu: Provide arch_this_cpu_write() implementation
s390/percpu: Provide arch_this_cpu_read() implementation
...
The upcoming cpu idle time accounting rework involves comparing and
subtracting cross cpu time stamps. Time stamps created with the stckf
instruction monotonic with respect to the local cpu. For cross cpu
monotonic time stamps the slightly slower stcke instruction has to
be used [1].
Convert the idle time accounting relevant usages of stckf to stcke.
[1] Principles of Operation - Setting and Inspecting the Clock
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Ensure that all devices currently offline are purged correctly.
Previously, purging logic relied on the internal FSM state to
determine whether a device was offline. However, devices with a
target state of offline could be skipped if CIO internal
processing was still ongoing during the purge operation.
Update the purge decision logic to rely on the online variable
in the cdev structure instead of the internal FSM state,
providing a more reliable indication of actual device
availability.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [1]
Reported-by: Gui-Dong Han <hanguidong02@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220789
Fixes: ebc3d17915 ("s390/cio: introduce driver_override on the css bus")
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Link: https://patch.msgid.link/20260324005919.2408620-10-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Total patches: 107
Reviews/patch: 1.07
Reviewed rate: 67%
- The 2 patch series "ocfs2: give ocfs2 the ability to reclaim
suballocator free bg" from Heming Zhao saves disk space by teaching
ocfs2 to reclaim suballocator block group space.
- The 4 patch series "Add ARRAY_END(), and use it to fix off-by-one
bugs" from Alejandro Colomar adds the ARRAY_END() macro and uses it in
various places.
- The 2 patch series "vmcoreinfo: support VMCOREINFO_BYTES larger than
PAGE_SIZE" from Pnina Feder makes the vmcore code future-safe, if
VMCOREINFO_BYTES ever exceeds the page size.
- The 7 patch series "kallsyms: Prevent invalid access when showing
module buildid" from Petr Mladek cleans up kallsyms code related to
module buildid and fixes an invalid access crash when printing
backtraces.
- The 3 patch series "Address page fault in
ima_restore_measurement_list()" from Harshit Mogalapalli fixes a
kexec-related crash that can occur when booting the second-stage kernel
on x86.
- The 6 patch series "kho: ABI headers and Documentation updates" from
Mike Rapoport updates the kexec handover ABI documentation.
- The 4 patch series "Align atomic storage" from Finn Thain adds the
__aligned attribute to atomic_t and atomic64_t definitions to get
natural alignment of both types on csky, m68k, microblaze, nios2,
openrisc and sh.
- The 2 patch series "kho: clean up page initialization logic" from
Pratyush Yadav simplifies the page initialization logic in
kho_restore_page().
- The 6 patch series "Unload linux/kernel.h" from Yury Norov moves
several things out of kernel.h and into more appropriate places.
- The 7 patch series "don't abuse task_struct.group_leader" from Oleg
Nesterov removes the usage of ->group_leader when it is "obviously
unnecessary".
- The 5 patch series "list private v2 & luo flb" from Pasha Tatashin
adds some infrastructure improvements to the live update orchestrator.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY4giAAKCRDdBJ7gKXxA
jgusAQDnKkP8UWTqXPC1jI+OrDJGU5ciAx8lzLeBVqMKzoYk9AD/TlhT2Nlx+Ef6
0HCUHUD0FMvAw/7/Dfc6ZKxwBEIxyww=
=mmsH
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
`css_alloc_subchannel()` calls `device_initialize()` before setting up
the DMA masks. If `dma_set_coherent_mask()` or `dma_set_mask()` fails,
the error path frees the subchannel structure directly, bypassing
the device model reference counting.
Once `device_initialize()` has been called, the embedded struct device
must be released via `put_device()`, allowing the release callback to
free the container structure.
Fix the error path by dropping the initial device reference with
`put_device()` instead of calling `kfree()` directly.
This ensures correct device lifetime handling and avoids potential
use-after-free or double-free issues.
Fixes: e5dcf0025d ("s390/css: move subchannel lock allocation")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of
hex.h interfaces to directly #include <linux/hex.h> as part of the process
of putting kernel.h on a diet.
Removing hex.h from kernel.h means that 36K C source files don't have to
pay the price of parsing hex.h for the roughly 120 C source files that
need it.
This change has been build-tested with allmodconfig on most ARCHes. Also,
all users/callers of <linux/hex.h> in the entire source tree have been
updated if needed (if not already #included).
Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Move libvfio selftest artifacts in preparation of more tightly
coupled integration with KVM selftests. (David Matlack)
- Fix comment typo in mtty driver. (Chu Guangqing)
- Support for new hardware revision in the hisi_acc vfio-pci variant
driver where the migration registers can now be accessed via the PF.
When enabled for this support, the full BAR can be exposed to the
user. (Longfang Liu)
- Fix vfio cdev support for VF token passing, using the correct size
for the kernel structure, thereby actually allowing userspace to
provide a non-zero UUID token. Also set the match token callback for
the hisi_acc, fixing VF token support for this this vfio-pci variant
driver. (Raghavendra Rao Ananta)
- Introduce internal callbacks on vfio devices to simplify and
consolidate duplicate code for generating VFIO_DEVICE_GET_REGION_INFO
data, removing various ioctl intercepts with a more structured
solution. (Jason Gunthorpe)
- Introduce dma-buf support for vfio-pci devices, allowing MMIO regions
to be exposed through dma-buf objects with lifecycle managed through
move operations. This enables low-level interactions such as a
vfio-pci based SPDK drivers interacting directly with dma-buf capable
RDMA devices to enable peer-to-peer operations. IOMMUFD is also now
able to build upon this support to fill a long standing feature gap
versus the legacy vfio type1 IOMMU backend with an implementation of
P2P support for VM use cases that better manages the lifecycle of the
P2P mapping. (Leon Romanovsky, Jason Gunthorpe, Vivek Kasireddy)
- Convert eventfd triggering for error and request signals to use RCU
mechanisms in order to avoid a 3-way lockdep reported deadlock issue.
(Alex Williamson)
- Fix a 32-bit overflow introduced via dma-buf support manifesting with
large DMA buffers. (Alex Mastro)
- Convert nvgrace-gpu vfio-pci variant driver to insert mappings on
fault rather than at mmap time. This conversion serves both to make
use of huge PFNMAPs but also to both avoid corrected RAS events
during reset by now being subject to vfio-pci-core's use of
unmap_mapping_range(), and to enable a device readiness test after
reset. (Ankit Agrawal)
- Refactoring of vfio selftests to support multi-device tests and split
code to provide better separation between IOMMU and device objects.
This work also enables a new test suite addition to measure parallel
device initialization latency. (David Matlack)
-----BEGIN PGP SIGNATURE-----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=tpee
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.19-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Move libvfio selftest artifacts in preparation of more tightly
coupled integration with KVM selftests (David Matlack)
- Fix comment typo in mtty driver (Chu Guangqing)
- Support for new hardware revision in the hisi_acc vfio-pci variant
driver where the migration registers can now be accessed via the PF.
When enabled for this support, the full BAR can be exposed to the
user (Longfang Liu)
- Fix vfio cdev support for VF token passing, using the correct size
for the kernel structure, thereby actually allowing userspace to
provide a non-zero UUID token. Also set the match token callback for
the hisi_acc, fixing VF token support for this this vfio-pci variant
driver (Raghavendra Rao Ananta)
- Introduce internal callbacks on vfio devices to simplify and
consolidate duplicate code for generating VFIO_DEVICE_GET_REGION_INFO
data, removing various ioctl intercepts with a more structured
solution (Jason Gunthorpe)
- Introduce dma-buf support for vfio-pci devices, allowing MMIO regions
to be exposed through dma-buf objects with lifecycle managed through
move operations. This enables low-level interactions such as a
vfio-pci based SPDK drivers interacting directly with dma-buf capable
RDMA devices to enable peer-to-peer operations. IOMMUFD is also now
able to build upon this support to fill a long standing feature gap
versus the legacy vfio type1 IOMMU backend with an implementation of
P2P support for VM use cases that better manages the lifecycle of the
P2P mapping (Leon Romanovsky, Jason Gunthorpe, Vivek Kasireddy)
- Convert eventfd triggering for error and request signals to use RCU
mechanisms in order to avoid a 3-way lockdep reported deadlock issue
(Alex Williamson)
- Fix a 32-bit overflow introduced via dma-buf support manifesting with
large DMA buffers (Alex Mastro)
- Convert nvgrace-gpu vfio-pci variant driver to insert mappings on
fault rather than at mmap time. This conversion serves both to make
use of huge PFNMAPs but also to both avoid corrected RAS events
during reset by now being subject to vfio-pci-core's use of
unmap_mapping_range(), and to enable a device readiness test after
reset (Ankit Agrawal)
- Refactoring of vfio selftests to support multi-device tests and split
code to provide better separation between IOMMU and device objects.
This work also enables a new test suite addition to measure parallel
device initialization latency (David Matlack)
* tag 'vfio-v6.19-rc1' of https://github.com/awilliam/linux-vfio: (65 commits)
vfio: selftests: Add vfio_pci_device_init_perf_test
vfio: selftests: Eliminate INVALID_IOVA
vfio: selftests: Split libvfio.h into separate header files
vfio: selftests: Move vfio_selftests_*() helpers into libvfio.c
vfio: selftests: Rename vfio_util.h to libvfio.h
vfio: selftests: Stop passing device for IOMMU operations
vfio: selftests: Move IOVA allocator into iova_allocator.c
vfio: selftests: Move IOMMU library code into iommu.c
vfio: selftests: Rename struct vfio_dma_region to dma_region
vfio: selftests: Upgrade driver logging to dev_err()
vfio: selftests: Prefix logs with device BDF where relevant
vfio: selftests: Eliminate overly chatty logging
vfio: selftests: Support multiple devices in the same container/iommufd
vfio: selftests: Introduce struct iommu
vfio: selftests: Rename struct vfio_iommu_mode to iommu_mode
vfio: selftests: Allow passing multiple BDFs on the command line
vfio: selftests: Split run.sh into separate scripts
vfio: selftests: Move run.sh into scripts directory
vfio/nvgrace-gpu: wait for the GPU mem to be ready
vfio/nvgrace-gpu: Inform devmem unmapped after reset
...
The KMSG_COMPONENT macro is a leftover of the s390 specific "kernel
message catalog" which never made it upstream.
Remove the macro in order to get rid of a pointless indirection. Replace
all users with the string it defines. In almost all cases this leads to a
simple replacement like this:
- #define KMSG_COMPONENT "appldata"
- #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+ #define pr_fmt(fmt) "appldata: " fmt
Except for some special cases this is just mechanical/scripted work.
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
There shouldn't be any 31 bit code around anymore that matters.
Remove the compat layer support required to run 31 bit code.
Reason for removal is code simplification and reduced test effort.
Note that this comes without any deprecation warnings added to config
options, or kernel messages, since most likely those would be ignored
anyway.
If it turns out there is still a reason to keep the compat layer this
can be reverted at any time in the future.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use scnprintf() instead of sprintf() for those cases where the destination
is an array and the size of the array is known at compile time.
This prevents theoretical buffer overflows, but also avoids that people
again and again spend time to figure out if the code is actually safe.
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Starting with 'commit 2297791c92 ("s390/cio: dont unregister
subchannel from child-drivers")', cio no longer unregisters
subchannels when the attached device is invalid or unavailable.
As an unintended side-effect, the cio_ignore purge function no longer
removes subchannels for devices on the cio_ignore list if no CCW device
is attached. This situation occurs when a CCW device is non-operational
or unavailable
To ensure the same outcome of the purge function as when the
current cio_ignore list had been active during boot, update the purge
function to remove I/O subchannels without working CCW devices if the
associated device number is found on the cio_ignore list.
Fixes: 2297791c92 ("s390/cio: dont unregister subchannel from child-drivers")
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Remove superfluous newlines from inline assemblies. Compilers use the
number of lines of inline assemblies as heuristic for the complexity
and inline decisions. Therefore inline assemblies should only contain
as many lines as required.
A lot of inline assemblies contain a superfluous newline for the last
line. Remove such newlines to improve compiler inlining decisions.
Suggested-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
For the __xsch() inline assembly the conversion to flag output macros is
incomplete. Only the conditional shift of the return value was added, while
the required changes to the inline assembly itself are missing.
If compiled with GCC versions before 14.2 this leads to a double shift of
the cc output operand and therefore the returned value of __xsch() is
incorrectly always zero, instead of the expected condition code.
Fixes: e200565d43 ("s390/cio/ioasm: Convert to use flag output macros")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
- Standardize on the __ASSEMBLER__ macro that is provided by GCC
and Clang compilers and replace __ASSEMBLY__ with __ASSEMBLER__
in both uapi and non-uapi headers
- Explicitly include <linux/export.h> in architecture and driver
files which contain an EXPORT_SYMBOL() and remove the include
from the files which do not contain the EXPORT_SYMBOL()
- Use the full title of "z/Architecture Principles of Operation"
manual and the name of a section where facility bits are listed
- Use -D__DISABLE_EXPORTS for files in arch/s390/boot to avoid
unnecessary slowing down of the build and confusing external
kABI tools that process symtypes data
- Print additional unrecoverable machine check information to make
the root cause analysis easier
- Move cmpxchg_user_key() handling to uaccess library code, since
the generated code is large anyway and there is no benefit if it
is inlined
- Fix a problem when cmpxchg_user_key() is executing a code with a
non-default key: if a system is IPL-ed with "LOAD NORMAL", and
the previous system used storage keys where the fetch-protection
bit was set for some pages, and the cmpxchg_user_key() is located
within such page, a protection exception happens
- Either the external call or emergency signal order is used to send
an IPI to a remote CPU. Use the external order only, since it is at
least as good and sometimes even better, than the emergency signal
- In case of an early crash the early program check handler prints
more or less random value of the last breaking event address, since
it is not initialized properly. Copy the last breaking event address
from the lowcore to pt_regs to address this
- During STP synchronization check udelay() can not be used, since the
first CPU modifies tod_clock_base and get_tod_clock_monotonic() might
return a non-monotonic time. Instead, busy-loop on other CPUs, while
the the first CPU actually handles the synchronization operation
- When debugging the early kernel boot using QEMU with the -S flag and
GDB attached, skip the decompressor and start directly in kernel
- Rename PAI Crypto event 4210 according to z16 and z17 "z/Architecture
Principles of Operation" manual
- Remove the in-kernel time steering support in favour of the new s390
PTP driver, which allows the kernel clock steered more precisely
- Remove a possible false-positive warning in pte_free_defer(), which
could be triggered in a valid case KVM guest process is initializing
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCaIJQThccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8FI2APwPnlrj6ZVXzNA6dw0fSUt697rS
NlaHEORXL8KcfoQh8QD/WwHUe1VNtDG1R5bBn0guR+UytVgR9Tt7LxyKfIgT3ws=
=tdMb
-----END PGP SIGNATURE-----
Merge tag 's390-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Standardize on the __ASSEMBLER__ macro that is provided by GCC and
Clang compilers and replace __ASSEMBLY__ with __ASSEMBLER__ in both
uapi and non-uapi headers
- Explicitly include <linux/export.h> in architecture and driver files
which contain an EXPORT_SYMBOL() and remove the include from the
files which do not contain the EXPORT_SYMBOL()
- Use the full title of "z/Architecture Principles of Operation" manual
and the name of a section where facility bits are listed
- Use -D__DISABLE_EXPORTS for files in arch/s390/boot to avoid
unnecessary slowing down of the build and confusing external kABI
tools that process symtypes data
- Print additional unrecoverable machine check information to make the
root cause analysis easier
- Move cmpxchg_user_key() handling to uaccess library code, since the
generated code is large anyway and there is no benefit if it is
inlined
- Fix a problem when cmpxchg_user_key() is executing a code with a
non-default key: if a system is IPL-ed with "LOAD NORMAL", and the
previous system used storage keys where the fetch-protection bit was
set for some pages, and the cmpxchg_user_key() is located within such
page, a protection exception happens
- Either the external call or emergency signal order is used to send an
IPI to a remote CPU. Use the external order only, since it is at
least as good and sometimes even better, than the emergency signal
- In case of an early crash the early program check handler prints more
or less random value of the last breaking event address, since it is
not initialized properly. Copy the last breaking event address from
the lowcore to pt_regs to address this
- During STP synchronization check udelay() can not be used, since the
first CPU modifies tod_clock_base and get_tod_clock_monotonic() might
return a non-monotonic time. Instead, busy-loop on other CPUs, while
the the first CPU actually handles the synchronization operation
- When debugging the early kernel boot using QEMU with the -S flag and
GDB attached, skip the decompressor and start directly in kernel
- Rename PAI Crypto event 4210 according to z16 and z17 "z/Architecture
Principles of Operation" manual
- Remove the in-kernel time steering support in favour of the new s390
PTP driver, which allows the kernel clock steered more precisely
- Remove a possible false-positive warning in pte_free_defer(), which
could be triggered in a valid case KVM guest process is initializing
* tag 's390-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (29 commits)
s390/mm: Remove possible false-positive warning in pte_free_defer()
s390/stp: Default to enabled
s390/stp: Remove leap second support
s390/time: Remove in-kernel time steering
s390/sclp: Use monotonic clock in sclp_sync_wait()
s390/smp: Use monotonic clock in smp_emergency_stop()
s390/time: Use monotonic clock in get_cycles()
s390/pai_crypto: Rename PAI Crypto event 4210
scripts/gdb/symbols: make lx-symbols skip the s390 decompressor
s390/boot: Introduce jump_to_kernel() function
s390/stp: Remove udelay from stp_sync_clock()
s390/early: Copy last breaking event address to pt_regs
s390/smp: Remove conditional emergency signal order code usage
s390/uaccess: Merge cmpxchg_user_key() inline assemblies
s390/uaccess: Prevent kprobes on cmpxchg_user_key() functions
s390/uaccess: Initialize code pages executed with non-default access key
s390/skey: Provide infrastructure for executing with non-default access key
s390/uaccess: Make cmpxchg_user_key() library code
s390/page: Add memory clobber to page_set_storage_key()
s390/page: Cleanup page_set_storage_key() inline assemblies
...
Remove include <linux/export.h> from all files which do not contain an
EXPORT_SYMBOL().
See commit 7d95680d64 ("scripts/misc-check: check unnecessary #include
<linux/export.h> when W=1") for more details.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Explicitly include <linux/export.h> in files which contain an
EXPORT_SYMBOL().
See commit a934a57a42 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") for more details.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Add sorting of mcount locations at build time
- Rework uaccess functions with C exception handling to shorten inline
assembly size and enable full inlining. This yields near-optimal code
for small constant copies with a ~40kb kernel size increase
- Add support for a configurable STRICT_MM_TYPECHECKS which allows to
generate better code, but also allows to have type checking for
debug builds
- Optimize get_lowcore() for common callers with alternatives that
nearly revert to the pre-relocated lowcore code, while also slightly
reducing syscall entry and exit time
- Convert MACHINE_HAS_* checks for single facility tests into cpu_has_*
style macros that call test_facility(), and for features with additional
conditions, add a new ALT_TYPE_FEATURE alternative to provide a static
branch via alternative patching. Also, move machine feature detection
to the decompressor for early patching and add debugging functionality
to easily show which alternatives are patched
- Add exception table support to early boot / startup code to get rid
of the open coded exception handling
- Use asm_inline for all inline assemblies with EX_TABLE or ALTERNATIVE
to ensure correct inlining and unrolling decisions
- Remove 2k page table leftovers now that s390 has been switched to
always allocate 4k page tables
- Split kfence pool into 4k mappings in arch_kfence_init_pool() and
remove the architecture-specific kfence_split_mapping()
- Use READ_ONCE_NOCHECK() in regs_get_kernel_stack_nth() to silence
spurious KASAN warnings from opportunistic ftrace argument tracing
- Force __atomic_add_const() variants on s390 to always return void,
ensuring compile errors for improper usage
- Remove s390's ioremap_wt() and pgprot_writethrough() due to mismatched
semantics and lack of known users, relying on asm-generic fallbacks
- Signal eventfd in vfio-ap to notify userspace when the guest AP
configuration changes, including during mdev removal
- Convert mdev_types from an array to a pointer in vfio-ccw and vfio-ap
drivers to avoid fake flex array confusion
- Cleanup trap code
- Remove references to the outdated linux390@de.ibm.com address
- Other various small fixes and improvements all over the code
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmfmuPwACgkQjYWKoQLX
FBgTDAgAjKmZ5OYjACRfYepTvKk9SDqa2CBlQZ+BhbAXEVIrxKnv8OkImAXoWNsM
mFxiCxAHWdcD+nqTrxFsXhkNLsndijlwnj/IqZgvy6R/3yNtBlAYRPLujOmVrsQB
dWB8Dl38p63Ip1JfAqyabiAOUjfhrclRcM5FX5tgciXA6N/vhY3OM6k0+k7wN4Nj
Dei/rCrnYRXTrFQgtM4w8JTIrwdnXjeKvaTYCflh4Q5ISJ7TceSF7cqq8HOs5hhK
o2ciaoTdx212522CIsxeN3Ls3jrn8bCOCoOeSCysc5RL84grAuFnmjSajo1LFide
S/TQtHXYy78Wuei9xvHi561ogiv/ww==
=Kxgc
-----END PGP SIGNATURE-----
Merge tag 's390-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add sorting of mcount locations at build time
- Rework uaccess functions with C exception handling to shorten inline
assembly size and enable full inlining. This yields near-optimal code
for small constant copies with a ~40kb kernel size increase
- Add support for a configurable STRICT_MM_TYPECHECKS which allows to
generate better code, but also allows to have type checking for debug
builds
- Optimize get_lowcore() for common callers with alternatives that
nearly revert to the pre-relocated lowcore code, while also slightly
reducing syscall entry and exit time
- Convert MACHINE_HAS_* checks for single facility tests into cpu_has_*
style macros that call test_facility(), and for features with
additional conditions, add a new ALT_TYPE_FEATURE alternative to
provide a static branch via alternative patching. Also, move machine
feature detection to the decompressor for early patching and add
debugging functionality to easily show which alternatives are patched
- Add exception table support to early boot / startup code to get rid
of the open coded exception handling
- Use asm_inline for all inline assemblies with EX_TABLE or ALTERNATIVE
to ensure correct inlining and unrolling decisions
- Remove 2k page table leftovers now that s390 has been switched to
always allocate 4k page tables
- Split kfence pool into 4k mappings in arch_kfence_init_pool() and
remove the architecture-specific kfence_split_mapping()
- Use READ_ONCE_NOCHECK() in regs_get_kernel_stack_nth() to silence
spurious KASAN warnings from opportunistic ftrace argument tracing
- Force __atomic_add_const() variants on s390 to always return void,
ensuring compile errors for improper usage
- Remove s390's ioremap_wt() and pgprot_writethrough() due to
mismatched semantics and lack of known users, relying on asm-generic
fallbacks
- Signal eventfd in vfio-ap to notify userspace when the guest AP
configuration changes, including during mdev removal
- Convert mdev_types from an array to a pointer in vfio-ccw and vfio-ap
drivers to avoid fake flex array confusion
- Cleanup trap code
- Remove references to the outdated linux390@de.ibm.com address
- Other various small fixes and improvements all over the code
* tag 's390-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (78 commits)
s390: Use inline qualifier for all EX_TABLE and ALTERNATIVE inline assemblies
s390/kfence: Split kfence pool into 4k mappings in arch_kfence_init_pool()
s390/ptrace: Avoid KASAN false positives in regs_get_kernel_stack_nth()
s390/boot: Ignore vmlinux.map
s390/sysctl: Remove "vm/allocate_pgste" sysctl
s390: Remove 2k vs 4k page table leftovers
s390/tlb: Use mm_has_pgste() instead of mm_alloc_pgste()
s390/lowcore: Use lghi instead llilh to clear register
s390/syscall: Merge __do_syscall() and do_syscall()
s390/spinlock: Implement SPINLOCK_LOCKVAL with inline assembly
s390/smp: Implement raw_smp_processor_id() with inline assembly
s390/current: Implement current with inline assembly
s390/lowcore: Use inline qualifier for get_lowcore() inline assembly
s390: Move s390 sysctls into their own file under arch/s390
s390/syscall: Simplify syscall_get_arguments()
s390/vfio-ap: Notify userspace that guest's AP config changed when mdev removed
s390: Remove ioremap_wt() and pgprot_writethrough()
s390/mm: Add configurable STRICT_MM_TYPECHECKS
s390/mm: Convert pgste_val() into function
s390/mm: Convert pgprot_val() into function
...
Use asm_inline for all inline assemblies which make use of the EX_TABLE or
ALTERNATIVE macros.
These macros expand to many lines and the compiler assumes the number of
lines within an inline assembly is the same as the number of instructions
within an inline assembly. This has an effect on inlining and loop
unrolling decisions.
In order to avoid incorrect assumptions use asm_inline, which tells the
compiler that an inline assembly has the smallest possible size.
In order to avoid confusion when asm_inline should be used or not, since a
couple of inline assemblies are quite large: the rule is to always use
asm_inline whenever the EX_TABLE or ALTERNATIVE macro is used. In specific
cases there may be reasons to not follow this guideline, but that should
be documented with the corresponding code.
Using the inline qualifier everywhere has only a small effect on the kernel
image size:
add/remove: 0/10 grow/shrink: 19/8 up/down: 1492/-1858 (-366)
The only location where this seems to matter is load_unaligned_zeropad()
from word-at-a-time.h where the compiler inlines more functions within the
dcache code, which is indeed code where performance matters.
Suggested-by: Juergen Christ <jchrist@linux.ibm.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Move machine type detection to the decompressor and use static branches
to implement and use machine_is_[lpar|vm|kvm]() instead of a runtime check
via MACHINE_IS_[LPAR|VM|KVM].
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The vfio-ccw driver and the vfio parent device provided by it (parent)
support just a single mdev_type, and this is not likely to change any
time soon. To match the mdev interfaces nicely initially the choice was
made that mdev_types (which gets passed into mdev_register_parent())
shall be an array of pointers to struct mdev_type with a single element,
and to make things worse it ended up being the last member.
Now the problem with that is that before C99 the usual way to get
something similar to a flexible array member was to use a trailing array
of size 0 or 1. This is what I called fake flex array. For a while now
the community is trying to get rid of fake flex arrays. And while
mdev_types was not a fake flex array but an array of size one, because
it can easily be and probably was mistaken for a fake flex array it got
converted into a real C99 flex array with a compile time known constant
size of one.
As per [1] it was established that "only fake flexible arrays should be
transformed into C99 flex-array members". Since IMHO the entire point of
flex arrays is being flexible about the array size at run time, a C99
flex array is a poor fit for mdev_types. But an array of a size one is
a poor fit as well for the reason stated above, let us try to get rid of
the flex array without introducing back the one sized array.
So, lets make mdev_types a pointer to struct mdev_type and pass in the
address of that pointer as the 4th formal parameter of
mdev_register_parent().
[1] https://lore.kernel.org/lkml/85863d7a-2d8b-4c1b-b76a-e2f40834a7a8@embeddedor.com/
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20250217100614.3043620-3-pasic@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The linux390@de.ibm.com email address is outdated. It has been removed
from the MAINTAINERS file nearly 10 years ago with commit 64776820b4
("s390: remove generic email address from maintainers file"); remove
one of the last remaining occurrences.
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In some environments, the SCLP firmware interface used to query a
CHPID's configured state is not supported. On these environments,
rapidly reading the corresponding sysfs attribute produces inconsistent
results:
$ cat /sys/devices/css0/chp0.00/configure
cat: /sys/devices/css0/chp0.00/configure: Operation not supported
$ cat /sys/devices/css0/chp0.00/configure
3
This occurs for example when Linux is run as a KVM guest. The
inconsistency is a result of CIO using cached results for generating
the value of the "configure" attribute while failing to handle the
situation where no data was returned by SCLP.
Fix this by not updating the cache-expiration timestamp when SCLP
returns no data. With the fix applied, the system response is
consistent:
$ cat /sys/devices/css0/chp0.00/configure
cat: /sys/devices/css0/chp0.00/configure: Operation not supported
$ cat /sys/devices/css0/chp0.00/configure
cat: /sys/devices/css0/chp0.00/configure: Operation not supported
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Here is the big set of driver core and debugfs updates for 6.14-rc1.
It's coming late in the merge cycle as there are a number of merge
conflicts with your tree now, and I wanted to make sure they were
working properly. To resolve them, look in linux-next, and I will send
the "fixup" patch as a response to the pull request.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at least
one user that does have a regression with these, but Al is working on
tracking down the fix for it. In my use (and everyone else's linux-next
use), it does not seem like a big issue at the moment.
Here's a short list of the things in here:
- driver core bindings for PCI, platform, OF, and some i/o functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing things
in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon".
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ5koPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymFHACfT5acDKf2Bov2Lc/5u3vBW/R6ChsAnj+LmgVI
hcDSPodj4szR40RRnzBd
=u5Ey
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
As there is only one in-tree user, avoid a transition phase and switch
that user in the same commit. As there are some interdependencies
between the constness of the different symbols in the s390 driver,
covert the whole driver at once.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241205-sysfs-const-bin_attr-groups_macro-v1-1-ac5e855031e8@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of distributing the memory allocation and pointer arithmetic to
place slib and sl on the page that is allocated for them over multiple
functions and comments, move both into the same context directly next to
each other, so that the knowledge of how this is done is immediately
visible.
The actual layout in memory doesn't change with this, just the structure
of the code to achieve it.
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
ccw_device_get_ciw() already uses array indices to iterate over the vector
of CIWs, but then switches to pointer arithmetic when returning the one it
found. Change this to make it more consistent.
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
This feature is not only utilized by OSA, but by QDIO in general. Clear
up possible confusions.
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Use flag output macros in inline asm to allow for better code generation if
the compiler has support for the flag output constraint.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use flag output macros in inline asm to allow for better code generation if
the compiler has support for the flag output constraint.
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The current "measurement_chars" CHPID sysfs attribute exposes only a
limited, validity-filtered portion of data from the associated Channel-
Measurements Characteristics Block (CMCB). New machine models add data
that is relevant for userspace tooling to the "header"-portion of the
CMCB. This data that is not currently accessible to userspace.
To prevent having to add new sysfs attributes whenever a new bit of data
is added to the CMCB "header", add a new sysfs attribute named
"measurement_chars_full" that exposes the full, unfiltered CMCB.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the cio/scm code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the cio/css code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Tested-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the cio/ccwgroup code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Tested-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the cio/cmf code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the cio/device code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Tested-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Per Documentation/filesystems/sysfs.rst, sysfs_emit() is preferred for
presenting attributes to user space in sysfs. Convert the left-over uses
in the cio/chp code.
Signed-off-by: Mete Durlu <meted@linux.ibm.com>
Tested-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Starting with commit 2297791c92 ("s390/cio: dont unregister
subchannel from child-drivers"), CIO does not unregister subchannels
when the attached device is invalid or unavailable. Instead, it
allows subchannels to exist without a connected device. However, if
the DNV value is 0, such as, when all the CHPIDs of a subchannel are
configured in standby state, the subchannel is unregistered, which
contradicts the current subchannel specification.
Update the logic so that subchannels are not unregistered based
on the DNV value. Also update the SCHIB information even if the
DNV bit is zero.
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Fixes: 2297791c92 ("s390/cio: dont unregister subchannel from child-drivers")
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Fixed some confusing typos that were currently identified with codespell,
the details are as follows:
-in the code comments:
drivers/s390/cio/chsc.c:379: EBCIDC ==> EBCDIC
drivers/s390/cio/cio.h:22: sublass ==> subclass
drivers/s390/cio/cmf.c:49: exended ==> extended
drivers/s390/cio/cmf.c:138: sinlge ==> single
drivers/s390/cio/cmf.c:1230: Reenable ==> Re-enable
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Link: https://lore.kernel.org/r/20240929080353.11690-1-shenlichuan@vivo.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
