cardreader enables its PCI device with pcim_enable_device(). This,
implicitly, switches the function pci_request_regions() into managed
mode, where it becomes a devres function.
The PCI subsystem wants to remove this hybrid nature from its
interfaces. To do so, users of the aforementioned combination of
functions must be ported to non-hybrid functions.
Moreover, since both functions are already managed in this driver, the
calls to pci_release_regions() are unnecessary.
Remove the calls to pci_release_regions().
Replace the call to sometimes-managed pci_request_regions() with one to
the always-managed pcim_request_all_regions().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250417091532.26520-2-phasta@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The last uses of rtsx_ms_power_off_card3v3() and
rtsx_sd_power_off_card3v3() were removed by 2019's
commit bede03a579 ("misc: rtsx: Enable OCP for rts522a rts524a rts525a
rts5260")
The last use of rtsx_pci_transfer_data() was removed by 2024's
commit d0f459259c ("memstick: rtsx_pci_ms: Remove Realtek PCI memstick
driver")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250420145739.58337-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit a402006d48 ("misc: pci_endpoint_test: Remove global 'irq_type'
and 'no_msi'") changed so that the default IRQ vector requested by
pci_endpoint_test_probe() was no longer the module param 'irq_type', but
instead test->irq_type. test->irq_type is by default IRQ_TYPE_UNDEFINED
(until someone calls ioctl(PCITEST_SET_IRQTYPE)).
However, the commit also changed so that after initializing test->irq_type
to IRQ_TYPE_UNDEFINED, it also overrides it with driver_data->irq_type, if
the PCI device and vendor ID provides driver_data.
This causes a regression for PCI device and vendor IDs that do not provide
driver_data, and the host side pci_endpoint_test_driver driver failed to
probe on such platforms:
pci-endpoint-test 0001:01:00.0: Invalid IRQ type selected
pci-endpoint-test 0001:01:00.0: probe with driver pci-endpoint-test failed with error -22
Considering that the pci endpoint selftests and the old pcitest.sh always
call ioctl(PCITEST_SET_IRQTYPE) before performing any test that requires
IRQs, fix the regression by removing the allocation of IRQs in
pci_endpoint_test_probe(). The IRQ allocation will occur when
ioctl(PCITEST_SET_IRQTYPE) is called.
A positive side effect of this is that even if the endpoint controller has
issues with IRQs, the user can do still do all the tests/ioctls() that do
not require working IRQs, e.g. PCITEST_BAR and PCITEST_BARS.
This also means that we can remove the now unused irq_type from
driver_data. The irq_type will always be the one configured by the user
using ioctl(PCITEST_SET_IRQTYPE). (A user that does not know, or care
which irq_type that is used, can use PCITEST_IRQ_TYPE_AUTO. This has
superseded the need for a default irq_type in driver_data.)
[bhelgaas: add probe failure details]
Fixes: a402006d48 ("misc: pci_endpoint_test: Remove global 'irq_type' and 'no_msi'")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250416142825.336554-2-cassel@kernel.org
The TI FPC202 dual port controller serves as a low-speed signal aggregator
for common port types such as SFP, QSFP, Mini-SAS HD, and others.
It aggregates GPIO and I2C signals across two downstream ports, acting as
both a GPIO controller and an I2C address translator for up to two logical
devices per port.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
vsc_tp.tx_buf and vsc_tp.rx_buf point to a struct vsc_tp_packet, use
the correct type instead of "void *" and use sizeof(*ptr) when allocating
memory for these buffers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250318141203.94342-3-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gcc 15 honors the __counted_by(len) attribute on vsc_tp_packet.buf[]
and the vsc-tp.c code is using this in a wrong way. len does not contain
the available size in the buffer, it contains the actual packet length
*without* the crc. So as soon as vsc_tp_xfer() tries to add the crc to
buf[] the fortify-panic handler gets triggered:
[ 80.842193] memcpy: detected buffer overflow: 4 byte write of buffer size 0
[ 80.842243] WARNING: CPU: 4 PID: 272 at lib/string_helpers.c:1032 __fortify_report+0x45/0x50
...
[ 80.843175] __fortify_panic+0x9/0xb
[ 80.843186] vsc_tp_xfer.cold+0x67/0x67 [mei_vsc_hw]
[ 80.843210] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90
[ 80.843229] ? lockdep_hardirqs_on+0x7c/0x110
[ 80.843250] mei_vsc_hw_start+0x98/0x120 [mei_vsc]
[ 80.843270] mei_reset+0x11d/0x420 [mei]
The easiest fix would be to just drop the counted-by but with the exception
of the ack buffer in vsc_tp_xfer_helper() which only contains enough room
for the packet-header, all other uses of vsc_tp_packet always use a buffer
of VSC_TP_MAX_XFER_SIZE bytes for the packet.
Instead of just dropping the counted-by, split the vsc_tp_packet struct
definition into a header and a full-packet definition and use a fixed
size buf[] in the packet definition, this way fortify-source buffer
overrun checking still works when enabled.
Fixes: 566f5ca976 ("mei: Add transport driver for IVSC device")
Cc: stable@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250318141203.94342-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Under irq_ack, pci1xxxx_assign_bit reads the current interrupt status,
modifies and writes the entire value back. Since, the IRQ status bit
gets cleared on writing back, the better approach is to directly write
the bitmask to the register in order to preserve the value.
Fixes: 1f4d8ae231 ("misc: microchip: pci1xxxx: Add gpio irq handler and irq helper functions irq_ack, irq_mask, irq_unmask and irq_set_type of irq_chip.")
Cc: stable <stable@kernel.org>
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20250313170856.20868-3-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Resolve kernel panic while accessing IRQ handler associated with the
generated IRQ. This is done by acquiring the spinlock and storing the
current interrupt state before handling the interrupt request using
generic_handle_irq.
A previous fix patch was submitted where 'generic_handle_irq' was
replaced with 'handle_nested_irq'. However, this change also causes
the kernel panic where after determining which GPIO triggered the
interrupt and attempting to call handle_nested_irq with the mapped
IRQ number, leads to a failure in locating the registered handler.
Fixes: 194f9f94a5 ("misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling")
Cc: stable <stable@kernel.org>
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20250313170856.20868-2-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250408-gpiochip-set-rv-misc-v1-1-eb6345aea5cd@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces improvements to the signal handling processes on
the SVID/SSID 1028:0CE1 platform. By optimizing signal handling processes
we aim to deliver a more stable and reliable user experience.
The enhancements ensure robust connectivity and enhance signal process
performance. We have conducted extensive testing to ensure these
modifications result in noticeable improvements without impacting
existing functionalities.
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20250314094013.663223-1-ricky_wu@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The I2C core now provides a debugfs entry for each client. Let this
driver use it instead of the custom directory.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250318085727.20748-2-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following warning by removing unused flex-array member
`data` in `struct bcm_vk_peer_log`:
drivers/misc/bcm-vk/bcm_vk.h:415:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/Z9Nd4AmgrQDiK1Gn@kspp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The returned value, pfsm->miscdev.name, from devm_kasprintf()
could be NULL.
A pointer check is added to prevent potential NULL pointer dereference.
This is similar to the fix in commit 3027e7b15b
("ice: Fix some null pointer dereference issues in ice_ptp.c").
This issue is found by our static analysis tool.
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Link: https://lore.kernel.org/r/20250311010511.1028269-1-chenyuan0y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the fastrpc_rpmsg_probe function, the exit path labels are not
intuitive and do not clearly indicate the purpose of the goto
statements. Rename goto labels to make it more intuitive and to
align with labels of other functions.
Signed-off-by: Anandu Krishnan E <quic_anane@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250310085417.25559-1-quic_anane@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Remove the IBM CAPI (cxl) driver
Thanks to: Andrew Donnellan.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRjvi15rv0TSTaE+SIF0oADX8seIQUCZ+0ppwAKCRAF0oADX8se
IW2NAQDU+ZNn8xlyePGg2lRE+RZHndB8QL3AqiA0G9MxOKf1zwEA1XxGuqhqhRTx
tMqKobTucDuDzS9IoE9jWXj5Eo9QBgs=
=lpPm
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
- Remove the IBM CAPI (cxl) driver
Thanks to Andrew Donnellan.
* tag 'powerpc-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
docs: Fix references to IBM CAPI (cxl) removal version
cxl: Remove driver
around the fallout from the new CONFIG_OBJTOOL_WERROR=y feature,
which, despite its default-off nature, increased the profile/impact
of objtool warnings:
- Improve error handling and the presentation of warnings/errors.
- Revert the new summary warning line that some test-bot tools
interpreted as new regressions.
- Fix a number of objtool warnings in various drivers, core kernel
code and architecture code. About half of them are potential
problems related to out-of-bounds accesses or potential undefined
behavior, the other half are additional objtool annotations.
- Update objtool to latest (known) compiler quirks and
objtool bugs triggered by compiler code generation
- Misc fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KkiI
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2025-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"These are objtool fixes and updates by Josh Poimboeuf, centered around
the fallout from the new CONFIG_OBJTOOL_WERROR=y feature, which,
despite its default-off nature, increased the profile/impact of
objtool warnings:
- Improve error handling and the presentation of warnings/errors
- Revert the new summary warning line that some test-bot tools
interpreted as new regressions
- Fix a number of objtool warnings in various drivers, core kernel
code and architecture code. About half of them are potential
problems related to out-of-bounds accesses or potential undefined
behavior, the other half are additional objtool annotations
- Update objtool to latest (known) compiler quirks and objtool bugs
triggered by compiler code generation
- Misc fixes"
* tag 'objtool-urgent-2025-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
objtool/loongarch: Add unwind hints in prepare_frametrace()
rcu-tasks: Always inline rcu_irq_work_resched()
context_tracking: Always inline ct_{nmi,irq}_{enter,exit}()
sched/smt: Always inline sched_smt_active()
objtool: Fix verbose disassembly if CROSS_COMPILE isn't set
objtool: Change "warning:" to "error: " for fatal errors
objtool: Always fail on fatal errors
Revert "objtool: Increase per-function WARN_FUNC() rate limit"
objtool: Append "()" to function name in "unexpected end of section" warning
objtool: Ignore end-of-section jumps for KCOV/GCOV
objtool: Silence more KCOV warnings, part 2
objtool, drm/vmwgfx: Don't ignore vmw_send_msg() for ORC
objtool: Fix STACK_FRAME_NON_STANDARD for cold subfunctions
objtool: Fix segfault in ignore_unreachable_insn()
objtool: Fix NULL printf() '%s' argument in builtin-check.c:save_argv()
objtool, lkdtm: Obfuscate the do_nothing() pointer
objtool, regulator: rk808: Remove potential undefined behavior in rk806_set_mode_dcdc()
objtool, ASoC: codecs: wcd934x: Remove potential undefined behavior in wcd934x_slim_irq_handler()
objtool, Input: cyapa - Remove undefined behavior in cyapa_update_fw_store()
objtool, panic: Disable SMAP in __stack_chk_fail()
...
i2c-core updates (collected by Wolfram)
- remove last user and unexport i2c_of_match_device()
- irq usage cleanup from Jiri
i2c-host updates (collected by Andi)
Refactoring and cleanups
- octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
refactorings
- octeon: remove 10-bit address support
Improvements
- amd-asf: improved error handling
- designware: use guard(mutex)
- amd-asf, designware: update naming to follow latest specs
- cadence: fix cleanup path in probe
- i801: use MMIO and I/O mapping helpers to access registers
- pxa: handle error after clk_prepare_enable
New features
- added i2c_10bit_addr_*_from_msg() and updated multiple drivers
- omap: added multiplexer state handling
- qcom-geni: update frequency configuration
- qup: introduce DMA usage policy
New hardware support
- exynos: add support for Samsung exynos7870
- k1: add support for spacemit k1 (new driver)
- imx: add support for i.mx94 lpi2c
- rk3x: add support for rk3562
- designware: add support for Renesas RZ/N1D
Multiplexers
- ltc4306, reg: fix assignment in platform_driver structure
at24 eeprom updates (collected by Bartosz)
- add two new compatible entries to the DT binding document
- drop of_match_ptr() and ACPI_PTR() macros
-----BEGIN PGP SIGNATURE-----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=q/EK
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"i2c-core updates (collected by Wolfram):
- remove last user and unexport i2c_of_match_device()
- irq usage cleanup from Jiri
i2c-host updates (collected by Andi):
Refactoring and cleanups:
- octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
refactorings
- octeon: remove 10-bit address support
Improvements:
- amd-asf: improved error handling
- designware: use guard(mutex)
- amd-asf, designware: update naming to follow latest specs
- cadence: fix cleanup path in probe
- i801: use MMIO and I/O mapping helpers to access registers
- pxa: handle error after clk_prepare_enable
New features:
- added i2c_10bit_addr_*_from_msg() and updated multiple drivers
- omap: added multiplexer state handling
- qcom-geni: update frequency configuration
- qup: introduce DMA usage policy
New hardware support:
- exynos: add support for Samsung exynos7870
- k1: add support for spacemit k1 (new driver)
- imx: add support for i.mx94 lpi2c
- rk3x: add support for rk3562
- designware: add support for Renesas RZ/N1D
Multiplexers:
- ltc4306, reg: fix assignment in platform_driver structure
at24 eeprom updates (collected by Bartosz):
- add two new compatible entries to the DT binding document
- drop of_match_ptr() and ACPI_PTR() macros"
* tag 'i2c-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits)
dt-bindings: i2c: snps,designware-i2c: describe Renesas RZ/N1D variant
irqdomain: i2c: Switch to irq_find_mapping()
i2c: iproc: Refactor prototype and remove redundant error checks
i2c: qcom-geni: Update i2c frequency table to match hardware guidance
i2c: mlxbf: Use readl_poll_timeout_atomic() for polling
i2c: pasemi: Add registers bits and switch to BIT()
i2c: k1: Initialize variable before use
i2c: spacemit: add support for SpacemiT K1 SoC
dt-bindings: i2c: spacemit: add support for K1 SoC
i2c: omap: Add support for setting mux
dt-bindings: i2c: omap: Add mux-states property
i2c: octeon: remove 10-bit addressing support
i2c: octeon: fix return commenting
i2c: i801: Use MMIO if available
i2c: i801: Switch to iomapped register access
i2c: i801: Improve too small kill wait time in i801_check_post
i2c: i801: Move i801_wait_intr and i801_wait_byte_done in the code
i2c: i801: Cosmetic improvements
i2c: cadence: Move reset_control_assert after pm_runtime_set_suspended in probe error path
i2c: cadence: Simplify using devm_clk_get_enabled()
...
Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform bus
interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite a
while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mNdQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylktACfYJix41jCCDbiFjnu7Hz4OIdcrUsAnRyF164M
1n5MhEhsEmvQj7WBwQLE
=AmmW
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO driver updates from Greg KH:
"Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform
bus interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite
a while"
* tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
samples: rust_misc_device: fix markup in top-level docs
Coresight: Fix a NULL vs IS_ERR() bug in probe
misc: lis3lv02d: convert to use faux_device
tlclk: convert to use faux_device
regulator: dummy: convert to use the faux device interface
bus: mhi: host: Fix race between unprepare and queue_buf
coresight: configfs: Constify struct config_item_type
doc: iio: ad7380: describe offload support
iio: ad7380: add support for SPI offload
iio: light: Add check for array bounds in veml6075_read_int_time_ms
iio: adc: ti-ads7924 Drop unnecessary function parameters
staging: iio: ad9834: Use devm_regulator_get_enable()
staging: iio: ad9832: Use devm_regulator_get_enable()
iio: gyro: bmg160_spi: add of_match_table
dt-bindings: iio: adc: Add i.MX94 and i.MX95 support
iio: adc: ad7768-1: remove unnecessary locking
Documentation: ABI: add wideband filter type to sysfs-bus-iio
iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset
iio: adc: ad7768-1: Fix conversion result sign
iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config()
...
-----BEGIN PGP SIGNATURE-----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=gM1i
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Enable Configuration RRS SV, which makes device readiness visible,
early instead of during child bus scanning (Bjorn Helgaas)
- Log debug messages about reset methods being used (Bjorn Helgaas)
- Avoid reset when it has been disabled via sysfs (Nishanth
Aravamudan)
- Add common pci-ep-bus.yaml schema for exporting several peripherals
of a single PCI function via devicetree (Andrea della Porta)
- Create DT nodes for PCI host bridges to enable loading device tree
overlays to create platform devices for PCI devices that have
several features that require multiple drivers (Herve Codina)
Resource management:
- Enlarge devres table[] to accommodate bridge windows, ROM, IOV
BARs, etc., and validate BAR index in devres interfaces (Philipp
Stanner)
- Fix typo that repeatedly distributed resources to a bridge instead
of iterating over subordinate bridges, which resulted in too little
space to assign some BARs (Kai-Heng Feng)
- Relax bridge window tail sizing for optional resources, e.g., IOV
BARs, to avoid failures when removing and re-adding devices (Ilpo
Järvinen)
- Allow drivers to enable devices even if we haven't assigned
optional IOV resources to them (Ilpo Järvinen)
- Rework handling of optional resources (IOV BARs, ROMs) to reduce
failures if we can't allocate them (Ilpo Järvinen)
- Fix a NULL dereference in the SR-IOV VF creation error path (Shay
Drory)
- Fix s390 mmio_read/write syscalls, which didn't cause page faults
in some cases, which broke vfio-pci lazy mapping on first access
(Niklas Schnelle)
- Add pdev->non_mappable_bars to replace CONFIG_VFIO_PCI_MMAP, which
was disabled only for s390 (Niklas Schnelle)
- Support mmap of PCI resources on s390 except for ISM devices
(Niklas Schnelle)
ASPM:
- Delay pcie_link_state deallocation to avoid dangling pointers that
cause invalid references during hot-unplug (Daniel Stodden)
Power management:
- Allow PCI bridges to go to D3Hot when suspending on all non-x86
systems (Manivannan Sadhasivam)
Power control:
- Create pwrctrl devices in pci_scan_device() to make it more
symmetric with pci_pwrctrl_unregister() and make pwrctrl devices
for PCI bridges possible (Manivannan Sadhasivam)
- Unregister pwrctrl devices in pci_destroy_dev() so DOE, ASPM, etc.
can still access devices after pci_stop_dev() (Manivannan
Sadhasivam)
- If there's a pwrctrl device for a PCI device, skip scanning it
because the pwrctrl core will rescan the bus after the device is
powered on (Manivannan Sadhasivam)
- Add a pwrctrl driver for PCI slots based on voltage regulators
described via devicetree (Manivannan Sadhasivam)
Bandwidth control:
- Add set_pcie_speed.sh to TEST_PROGS to fix issue when executing the
set_pcie_cooling_state.sh test case (Yi Lai)
- Avoid a NULL pointer dereference when we run out of bus numbers to
assign for a bridge secondary bus (Lukas Wunner)
Hotplug:
- Drop superfluous pci_hotplug_slot_list, try_module_get() calls, and
NULL pointer checks (Lukas Wunner)
- Drop shpchp module init/exit logging, replace shpchp dbg() with
ctrl_dbg(), and remove unused dbg(), err(), info(), warn() wrappers
(Ilpo Järvinen)
- Drop 'shpchp_debug' module parameter in favor of standard dynamic
debugging (Ilpo Järvinen)
- Drop unused cpcihp .get_power(), .set_power() function pointers
(Guilherme Giacomo Simoes)
- Disable hotplug interrupts in portdrv only when pciehp is not
enabled to avoid issuing two hotplug commands too close together
(Feng Tang)
- Skip pciehp 'device replaced' check if the device has been removed
to address a deadlock when resuming after a device was removed
during system sleep (Lukas Wunner)
- Don't enable pciehp hotplug interupt when resuming in poll mode
(Ilpo Järvinen)
Virtualization:
- Fix bugs in 'pci=config_acs=' kernel command line parameter (Tushar
Dave)
DOE:
- Expose supported DOE features via sysfs (Alistair Francis)
- Allow DOE support to be enabled even if CXL isn't enabled (Alistair
Francis)
Endpoint framework:
- Convert PCI device data so pci-epf-test works correctly on
big-endian endpoint systems (Niklas Cassel)
- Add BAR_RESIZABLE type to endpoint framework and add DWC core
support for EPF drivers to set BAR_RESIZABLE type and size (Niklas
Cassel)
- Fix pci-epf-test double free that causes an oops if the host
reboots and PERST# deassertion restarts endpoint BAR allocation
(Christian Bruel)
- Fix endpoint BAR testing so tests can skip disabled BARs instead of
reporting them as failures (Niklas Cassel)
- Widen endpoint test BAR size variable to accommodate BARs larger
than INT_MAX (Niklas Cassel)
- Remove unused tools 'pci' build target left over after moving tests
to tools/testing/selftests/pci_endpoint (Jianfeng Liu)
Altera PCIe controller driver:
- Add DT binding and driver support for Agilex family (P-Tile,
F-Tile, R-Tile) (Matthew Gerlach and D M, Sharath Kumar)
AMD MDB PCIe controller driver:
- Add DT binding and driver for AMD MDB (Multimedia DMA Bridge)
(Thippeswamy Havalige)
Broadcom STB PCIe controller driver:
- Add BCM2712 MSI-X DT binding and interrupt controller drivers and
add softdep on irq_bcm2712_mip driver to ensure that it is loaded
first (Stanimir Varbanov)
- Expand inbound window map to 64GB so it can accommodate BCM2712
(Stanimir Varbanov)
- Add BCM2712 support and DT updates (Stanimir Varbanov)
- Apply link speed restriction before bringing link up, not after
(Jim Quinlan)
- Update Max Link Speed in Link Capabilities via the internal
writable register, not the read-only config register (Jim Quinlan)
- Handle regulator_bulk_get() error to avoid panic when we call
regulator_bulk_free() later (Jim Quinlan)
- Disable regulators only when removing the bus immediately below a
Root Port because we don't support regulators deeper in the
hierarchy (Jim Quinlan)
- Make const read-only arrays static (Colin Ian King)
Cadence PCIe endpoint driver:
- Correct MSG TLP generation so endpoints can generate INTx messages
(Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Identify the second controller on i.MX8MQ based on devicetree
'linux,pci-domain' instead of DBI 'reg' address (Richard Zhu)
- Remove imx_pcie_cpu_addr_fixup() since dwc core can now derive the
ATU input address (using parent_bus_offset) from devicetree (Frank
Li)
Freescale Layerscape PCIe controller driver:
- Drop deprecated 'num-ib-windows' and 'num-ob-windows' and
unnecessary 'status' from example (Krzysztof Kozlowski)
- Correct the syscon_regmap_lookup_by_phandle_args("fsl,pcie-scfg")
arg_count to fix probe failure on LS1043A (Ioana Ciornei)
HiSilicon STB PCIe controller driver:
- Call phy_exit() to clean up if histb_pcie_probe() fails (Christophe
JAILLET)
Intel Gateway PCIe controller driver:
- Remove intel_pcie_cpu_addr() since dwc core can now derive the ATU
input address (using parent_bus_offset) from devicetree (Frank Li)
Intel VMD host bridge driver:
- Convert vmd_dev.cfg_lock from spinlock_t to raw_spinlock_t so
pci_ops.read() will never sleep, even on PREEMPT_RT where
spinlock_t becomes a sleepable lock, to avoid calling a sleeping
function from invalid context (Ryo Takakura)
MediaTek PCIe Gen3 controller driver:
- Remove leftover mac_reset assert for Airoha EN7581 SoC (Lorenzo
Bianconi)
- Add EN7581 PBUS controller 'mediatek,pbus-csr' DT property and
program host bridge memory aperture to this syscon node (Lorenzo
Bianconi)
Qualcomm PCIe controller driver:
- Add qcom,pcie-ipq5332 binding (Varadarajan Narayanan)
- Add qcom i.MX8QM and i.MX8QXP/DXP optional DMA interrupt (Alexander
Stein)
- Add optional dma-coherent DT property for Qualcomm SA8775P (Dmitry
Baryshkov)
- Make DT iommu property required for SA8775P and prohibited for
SDX55 (Dmitry Baryshkov)
- Add DT IOMMU and DMA-related properties for Qualcomm SM8450 (Dmitry
Baryshkov)
- Add endpoint DT properties for SAR2130P and enable endpoint mode in
driver (Dmitry Baryshkov)
- Describe endpoint BAR0 and BAR2 as 64-bit only and BAR1 and BAR3 as
RESERVED (Manivannan Sadhasivam)
Rockchip DesignWare PCIe controller driver:
- Describe rk3568 and rk3588 BARs as Resizable, not Fixed (Niklas
Cassel)
Synopsys DesignWare PCIe controller driver:
- Add debugfs-based Silicon Debug, Error Injection, Statistical
Counter support for DWC (Shradha Todi)
- Add debugfs property to expose LTSSM status of DWC PCIe link (Hans
Zhang)
- Add Rockchip support for DWC debugfs features (Niklas Cassel)
- Add dw_pcie_parent_bus_offset() to look up the parent bus address
of a specified 'reg' property and return the offset from the CPU
physical address (Frank Li)
- Use dw_pcie_parent_bus_offset() to derive CPU -> ATU addr offset
via 'reg[config]' for host controllers and 'reg[addr_space]' for
endpoint controllers (Frank Li)
- Apply struct dw_pcie.parent_bus_offset in ATU users to remove use
of .cpu_addr_fixup() when programming ATU (Frank Li)
TI J721E PCIe driver:
- Correct the 'link down' interrupt bit for J784S4 (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Describe AM65x BARs 2 and 5 as Resizable (not Fixed) and reduce
alignment requirement from 1MB to 64KB (Niklas Cassel)
Xilinx Versal CPM PCIe controller driver:
- Free IRQ domain in probe error path to avoid leaking it
(Thippeswamy Havalige)
- Add DT .compatible "xlnx,versal-cpm5nc-host" and driver support for
Versal Net CPM5NC Root Port controller (Thippeswamy Havalige)
- Add driver support for CPM5_HOST1 (Thippeswamy Havalige)
Miscellaneous:
- Convert fsl,mpc83xx-pcie binding to YAML (J. Neuschäfer)
- Use for_each_available_child_of_node_scoped() to simplify apple,
kirin, mediatek, mt7621, tegra drivers (Zhang Zekun)"
* tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (197 commits)
PCI: layerscape: Fix arg_count to syscon_regmap_lookup_by_phandle_args()
PCI: j721e: Fix the value of .linkdown_irq_regfield for J784S4
misc: pci_endpoint_test: Add support for PCITEST_IRQ_TYPE_AUTO
PCI: endpoint: pci-epf-test: Expose supported IRQ types in CAPS register
PCI: dw-rockchip: Endpoint mode cannot raise INTx interrupts
PCI: endpoint: Add intx_capable to epc_features struct
dt-bindings: PCI: Add common schema for devices accessible through PCI BARs
PCI: intel-gw: Remove intel_pcie_cpu_addr()
PCI: imx6: Remove imx_pcie_cpu_addr_fixup()
PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup()
PCI: dwc: ep: Ensure proper iteration over outbound map windows
PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offset
PCI: dwc: ep: Consolidate devicetree handling in dw_pcie_ep_get_resources()
PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init()
PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr offset
PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debug
PCI: dwc: Add dw_pcie_parent_bus_offset()
PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion
PCI: xilinx-cpm: Add cpm_csr register mapping for CPM5_HOST1 variant
PCI: brcmstb: Make const read-only arrays static
...
If execute_location()'s memcpy of do_nothing() gets inlined and unrolled
by the compiler, it copies one word at a time:
mov 0x0(%rip),%rax R_X86_64_PC32 .text+0x1374
mov %rax,0x38(%rbx)
mov 0x0(%rip),%rax R_X86_64_PC32 .text+0x136c
mov %rax,0x30(%rbx)
...
Those .text references point to the middle of the function, causing
objtool to complain about their lack of ENDBR.
Prevent that by resolving the function pointer at runtime rather than
build time. This fixes the following warning:
drivers/misc/lkdtm/lkdtm.o: warning: objtool: execute_location+0x23: relocation to !ENDBR: .text+0x1378
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/30b9abffbddeb43c4f6320b1270fa9b4d74c54ed.1742852847.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/oe-kbuild-all/202503191453.uFfxQy5R-lkp@intel.com/
- Move struct dwc_pcie_vsec_id to include/linux/pcie-dwc.h, where it can be
shared by debugfs, perf, sysfs, etc (Manivannan Sadhasivam)
- Add dw_pcie_find_vsec_capability() to locate Vendor Specific Extended
Capabilities (Shradha Todi)
- Add debugfs-based Silicon Debug, Error Injection, Statistical Counter
support for DWC (Shradha Todi)
- Add debugfs property to expose LTSSM status of DWC PCIe link (Hans Zhang)
- Add Rockchip Vendor ID and Vendor Specific ID of RAS DES Capability so
the DWC debugfs features work for Rockchip as well (Niklas Cassel)
* pci/controller/dwc:
PCI: dw-rockchip: Hide broken ATS capability for RK3588 running in EP mode
PCI: dwc: ep: Add dw_pcie_ep_hide_ext_capability()
PCI: dwc: ep: Return -ENOMEM for allocation failures
PCI: dwc: Add Rockchip to the RAS DES allowed vendor list
PCI: Add Rockchip Vendor ID
PCI: dwc: Add debugfs property to provide LTSSM status of the PCIe link
PCI: dwc: Add debugfs based Statistical Counter support for DWC
PCI: dwc: Add debugfs based Error Injection support for DWC
PCI: dwc: Add debugfs based Silicon Debug support for DWC
PCI: dwc: Add helper to find the Vendor Specific Extended Capability (VSEC)
perf/dwc_pcie: Move common DWC struct definitions to 'pcie-dwc.h'
For PCITEST_MSI we really want to set PCITEST_SET_IRQTYPE explicitly
to PCITEST_IRQ_TYPE_MSI, since we want to test if MSI works.
For PCITEST_MSIX we really want to set PCITEST_SET_IRQTYPE explicitly
to PCITEST_IRQ_TYPE_MSIX, since we want to test if MSI works.
For PCITEST_LEGACY_IRQ we really want to set PCITEST_SET_IRQTYPE
explicitly to PCITEST_IRQ_TYPE_INTX, since we want to test if INTx
works.
However, for PCITEST_WRITE, PCITEST_READ, PCITEST_COPY, we really don't
care which IRQ type that is used, we just want to use a IRQ type that is
supported by the EPC.
The old behavior was to always use MSI for PCITEST_WRITE, PCITEST_READ,
PCITEST_COPY, was to always set IRQ type to MSI before doing the actual
test, however, there are EPC drivers that do not support MSI.
Add a new PCITEST_IRQ_TYPE_AUTO, that will use the CAPS register to see
which IRQ types the endpoint supports, and use one of the supported IRQ
types.
For backwards compatibility, if the endpoint does not expose any supported
IRQ type in the CAPS register, simply fallback to using MSI, as it was
unconditionally done before.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250310111016.859445-16-cassel@kernel.org
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the upcoming
Rust integration and is obviously a silly implementation to begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member.
-----BEGIN PGP SIGNATURE-----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=bYAX
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
Refactoring and cleanups
- octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
refactorings
- octeon: remove 10-bit address support
Improvements
- amd-asf: improved error handling
- designware: use guard(mutex)
- amd-asf, designware: update naming to follow latest specs
- cadence: fix cleanup path in probe
- i801: use MMIO and I/O mapping helpers to access registers
- pxa: handle error after clk_prepare_enable
New features
- added i2c_10bit_addr_*_from_msg() and updated multiple drivers
- omap: added multiplexer state handling
- qcom-geni: update frequency configuration
- qup: introduce DMA usage policy
New hardware support
- exynos: add support for Samsung exynos7870
- k1: add support for spacemit k1 (new driver)
- imx: add support for i.mx94 lpi2c
- rk3x: add support for rk3562
Multiplexers
- ltc4306, reg: fix assignment in platform_driver structure
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCZ97X5hYcYW5kaS5zaHl0
aUBrZXJuZWwub3JnAAoJENp4BWYm0y1uU9AA/RP+DKnscKffF0ZMz7FPDHQ+uzDJ
bi2WU/vKSKORJN9+AQDdxMOCtqQWbwuWZKNFI9UX4YBW2Tv8heCjgzvZXxmiAg==
=P/Dk
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host updates for v6.15
Refactoring and cleanups
- octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
refactorings
- octeon: remove 10-bit address support
Improvements
- amd-asf: improved error handling
- designware: use guard(mutex)
- amd-asf, designware: update naming to follow latest specs
- cadence: fix cleanup path in probe
- i801: use MMIO and I/O mapping helpers to access registers
- pxa: handle error after clk_prepare_enable
New features
- added i2c_10bit_addr_*_from_msg() and updated multiple drivers
- omap: added multiplexer state handling
- qcom-geni: update frequency configuration
- qup: introduce DMA usage policy
New hardware support
- exynos: add support for Samsung exynos7870
- k1: add support for spacemit k1 (new driver)
- imx: add support for i.mx94 lpi2c
- rk3x: add support for rk3562
Multiplexers
- ltc4306, reg: fix assignment in platform_driver structure
Remove the cxl driver that provides support for the IBM Coherent
Accelerator Processor Interface. Revert or clean up associated code in
arch/powerpc that is no longer necessary.
cxl has received minimal maintenance for several years, and is not
supported on the Power10 processor. We aren't aware of any users who are
likely to be using recent kernels.
Thanks to Mikey Neuling, Ian Munsie, Daniel Axtens, Frederic Barrat,
Christophe Lombard, Philippe Bergheaud, Vaibhav Jain and Alastair
D'Silva for their work on this driver over the years.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20250219070007.177725-2-ajd@linux.ibm.com
Use the IRQ_TYPE_* defines from the UAPI header rather than duplicating
these defines in the driver itself.
No functional change.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250310111016.859445-11-cassel@kernel.org
The pci_endpoint_test_request_irq() and pci_endpoint_test_release_irq()
are called repeatedly by the users through pci_endpoint_test_set_irq().
So using the managed version of IRQ functions within these functions
has no effect.
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250225110252.28866-7-hayashi.kunihiko@socionext.com
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The global variable "irq_type" preserves the current value of
ioctl(GET_IRQTYPE).
However, all tests that use interrupts first call ioctl(SET_IRQTYPE)
to set "test->irq_type", then write the value of test->irq_type into
the register pointed by test_reg_bar, and request the interrupt to the
endpoint. The endpoint function driver, pci-epf-test, refers to the
register, and determine which type of interrupt to raise.
The global variable "irq_type" is never used in the actual test,
so remove the variable and replace it with "test->irq_type".
Also, for the same reason, the variable "no_msi" can be removed.
Initially, "test->irq_type" has IRQ_TYPE_UNDEFINED, and the
ioctl(GET_IRQTYPE) before calling ioctl(SET_IRQTYPE) will return
an error.
Suggested-by: Niklas Cassel <cassel@kernel.org>
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250225110252.28866-6-hayashi.kunihiko@socionext.com
There are two variables that indicate the interrupt type to be used
in the next test execution, "irq_type" as global and "test->irq_type".
The global is referenced from pci_endpoint_test_get_irq() to preserve
the current type for ioctl(PCITEST_GET_IRQTYPE).
The type set in this function isn't reflected in the global "irq_type",
so ioctl(PCITEST_GET_IRQTYPE) returns the previous type.
As a result, the wrong type is displayed in old version of "pcitest"
as follows:
- Result of running "pcitest -i 0"
SET IRQ TYPE TO LEGACY: OKAY
- Result of running "pcitest -I"
GET IRQ TYPE: MSI
Whereas running the new version of "pcitest" in kselftest results in an
error as follows:
# RUN pci_ep_basic.LEGACY_IRQ_TEST ...
# pci_endpoint_test.c:104:LEGACY_IRQ_TEST:Expected 0 (0) == ret (1)
# pci_endpoint_test.c:104:LEGACY_IRQ_TEST:Can't get Legacy IRQ type
Fix this issue by propagating the current type to the global "irq_type".
Fixes: b2ba9225e0 ("misc: pci_endpoint_test: Avoid using module parameter to determine irqtype")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250225110252.28866-5-hayashi.kunihiko@socionext.com
The lis3lv02d driver does not need to create a platform device, it only
did so because it was simple to do that in order to get a place in sysfs
to hang some device-specific attributes. Change it over to use the faux
device instead as this is NOT a real platform device, and it makes the
code even smaller than before.
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/2025021028-shortcake-stained-b0a8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are two variables that indicate the interrupt type to be used
in the next test execution, global "irq_type" and "test->irq_type".
The former is referenced from pci_endpoint_test_get_irq() to preserve
the current type for ioctl(PCITEST_GET_IRQTYPE).
In the pci_endpoint_test_request_irq(), since this global variable
is referenced when an error occurs, the unintended error message is
displayed.
For example, after running "pcitest -i 2", the following message
shows "MSI 3" even if the current IRQ type becomes "MSI-X":
pci-endpoint-test 0000:01:00.0: Failed to request IRQ 30 for MSI 3
SET IRQ TYPE TO MSI-X: NOT OKAY
Fix this issue by using "test->irq_type" instead of global "irq_type".
Cc: stable@vger.kernel.org
Fixes: b2ba9225e0 ("misc: pci_endpoint_test: Avoid using module parameter to determine irqtype")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20250225110252.28866-4-hayashi.kunihiko@socionext.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
After devm_request_irq() fails with error in pci_endpoint_test_request_irq(),
the pci_endpoint_test_free_irq_vectors() is called assuming that all IRQs
have been released.
However, some requested IRQs remain unreleased, so there are still
/proc/irq/* entries remaining, and this results in WARN() with the
following message:
remove_proc_entry: removing non-empty directory 'irq/30', leaking at least 'pci-endpoint-test.0'
WARNING: CPU: 0 PID: 202 at fs/proc/generic.c:719 remove_proc_entry +0x190/0x19c
To solve this issue, set the number of remaining IRQs to test->num_irqs,
and release IRQs in advance by calling pci_endpoint_test_release_irq().
Cc: stable@vger.kernel.org
Fixes: e03327122e ("pci_endpoint_test: Add 2 ioctl commands")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20250225110252.28866-3-hayashi.kunihiko@socionext.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Running 'pcitest -b 0' fails with "TEST FAILED" when the BAR0 size
is e.g. 8 GB.
The return value of the pci_resource_len() macro can be larger than that
of a signed integer type. Thus, when using 'pcitest' with an 8 GB BAR,
the bar_size of the integer type will overflow.
Change bar_size from integer to resource_size_t to prevent integer
overflow for large BAR sizes with 32-bit compilers.
In order to handle 64-bit resource_type_t on 32-bit platforms, we would
have needed to use a function like div_u64() or similar. Instead, change
the code to use addition instead of division. This avoids the need for
div_u64() or similar, while also simplifying the code.
Fixes: cda370ec6d ("misc: pci_endpoint_test: Avoid using hard-coded BAR sizes")
Co-developed-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250124093300.3629624-2-cassel@kernel.org
[mani: added fixes tag]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The current code returns -ENOMEM if test->bar[barno] is NULL.
There can be two reasons why test->bar[barno] is NULL:
1) The pci_ioremap_bar() call in pci_endpoint_test_probe() failed.
2) The BAR was skipped, because it is disabled by the endpoint.
Many PCI endpoint controller drivers will disable all BARs in their
init function. A disabled BAR will have a size of 0.
A PCI endpoint function driver will be able to enable any BAR that
is not marked as BAR_RESERVED (which means that the BAR should not
be touched by the EPF driver).
Thus, perform check if the size is 0, before checking if
test->bar[barno] is NULL, such that we can return different errors.
This will allow the selftests to return SKIP instead of FAIL for
disabled BARs.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250123120147.3603409-3-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Increase the size of the string buffer to avoid potential truncation in
pci_endpoint_test_probe().
This fixes the following build warning when compiling with W=1:
drivers/misc/pci_endpoint_test.c:29:49: note: directive argument in the range [0, 2147483647]
29 | #define DRV_MODULE_NAME "pci-endpoint-test"
| ^~~~~~~~~~~~~~~~~~~
drivers/misc/pci_endpoint_test.c:998:38: note: in expansion of macro ‘DRV_MODULE_NAME’
998 | snprintf(name, sizeof(name), DRV_MODULE_NAME ".%d", id);
| ^~~~~~~~~~~~~~~
drivers/misc/pci_endpoint_test.c:998:9: note: ‘snprintf’ output between 20 and 29 bytes into a destination of size 24
998 | snprintf(name, sizeof(name), DRV_MODULE_NAME ".%d", id);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250123103127.3581432-2-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Commit f26d37ee9b ("misc: pci_endpoint_test: Fix IOCTL return value")
changed the return value of pci_endpoint_test_bars_read_bar() from false
to -EINVAL on error, however, it failed to update the error handling.
Fixes: f26d37ee9b ("misc: pci_endpoint_test: Fix IOCTL return value")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250204110640.570823-2-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Move PCI_VENDOR_ID_ROCKCHIP from pci_endpoint_test.c to pci_ids.h and
reuse it in pcie-rockchip-host.c.
Link: https://lore.kernel.org/r/20250218092120.2322784-2-cassel@kernel.org
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
These result in a very small reduction in driver size, but at the cost
of more complex build and slightly harder to read code. In the case of
of_match_ptr() it also prevents use of PRP0001 ACPI based identification.
In this particular case we have a valid ACPI/PNP ID that should be used
in preference to PRP0001 but doesn't mean we should prevent that route.
With this done, drop unneeded of*.h inclusions and __maybe_unused markers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250225100838.362125-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The x86 CPU selection menu is confusing for a number of reasons:
When configuring 32-bit kernels, it shows a small number of early 64-bit
microarchitectures (K8, Core 2) but not the regular generic 64-bit target
that is the normal default. There is no longer a reason to run 32-bit
kernels on production 64-bit systems, so only actual 32-bit CPUs need
to be shown here.
When configuring 64-bit kernels, the options also pointless as there is
no way to pick any CPU from the past 15 years, leaving GENERIC_CPU as
the only sensible choice.
Address both of the above by removing the obsolete options and making
all 64-bit kernels run on both Intel and AMD CPUs from any generation.
Testing generic 32-bit kernels on 64-bit hardware remains possible,
just not building a 32-bit kernel that requires a 64-bit CPU.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250226213714.4040853-5-arnd@kernel.org
GCC versions below 13 incorrectly detect the copy size as being static and too
small to fit in the "fds" array. Work around this by explicitly calculating the
size and returning EINVAL based on that, instead of based on the object count.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502072019.LYoCR9bF-lkp@intel.com/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
--
Suggested-by as per Arnd's request, but the only thing I changed was preserving
array_size() [as noted by Geert in the linked thread]. I tested and found no
regressions.
v2: Add missing sign-off
Link: https://lore.kernel.org/r/20250220192334.549167-1-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Like other eeprom drivers, check if the device is really there and
functional before probing.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20250218220959.721698-1-eajames@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following functions have been in the mei code for
a long time but have never been used.
mei_txe_setup_satt2() was added in 2014 by
commit 32e2b59fca ("mei: txe: add hw-txe.c")
mei_me_cl_rm_by_uuid_id() was added in 2015 by
commit 79563db9dd ("mei: add reference counting for me clients")
mei_cldev_uuid() was added in 2015 by
commit baeacd0376 ("mei: bus: export uuid and protocol version to mei_cl
bus drivers")
mei_cldev_recv_nonblock() was added in 2016 by
commit 076802d006 ("mei: bus: enable non-blocking RX")
it is the only user of mei_cldev_recv_nonblock_vtag().
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250130012654.255119-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dev_id value in the GPIO lookup table must match to
the device instance name, which in this case is combined
of name and platform device ID, i.e. "spi_gpio.1". But
the table assumed that there was no platform device ID
defined, which is wrong. Fix the dev_id value accordingly.
Fixes: 9b00bc7b90 ("spi: spi-gpio: Rewrite to use GPIO descriptors")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250206220311.1554075-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This allows ntsync to be usuable by non-root processes out of the box
Signed-off-by: Mike Lothian <mike@fireburn.co.uk>
Reviewed-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20250214122759.2629-2-mike@fireburn.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The _CRS ACPI resources table has 2 entries for the host wakeup GPIO,
the first one being a regular GpioIo () resource while the second one
is a GpioInt () resource for the same pin.
The acpi_gpio_mapping table used by vsc-tp.c maps the first Gpio ()
resource to "wakeuphost-gpios" where as the second GpioInt () entry
is mapped to "wakeuphostint-gpios".
Using "wakeuphost" to request the GPIO as was done until now, means
that the gpiolib-acpi code does not know that the GPIO is active-low
as that info is only available in the GpioInt () entry.
Things were still working before due to the following happening:
1. Since the 2 entries point to the same pin they share a struct gpio_desc
2. The SPI core creates the SPI device vsc-tp.c binds to and calls
acpi_dev_gpio_irq_get(). This does use the second entry and sets
FLAG_ACTIVE_LOW in gpio_desc.flags .
3. vsc_tp_probe() requests the "wakeuphost" GPIO and inherits the
active-low flag set by acpi_dev_gpio_irq_get()
But there is a possible scenario where things do not work:
1. - 3. happen as above
4. After requesting the "wakeuphost" GPIO, the "resetfw" GPIO is requested
next, but its USB GPIO controller is not available yet, so this call
returns -EPROBE_DEFER.
5. The gpio_desc for "wakeuphost" is put() and during this the active-low
flag is cleared from gpio_desc.flags .
6. Later on vsc_tp_probe() requests the "wakeuphost" GPIO again, but now it
is not marked active-low.
The difference can also be seen in /sys/kernel/debug/gpio, which contains
the following line for this GPIO:
gpio-535 ( |wakeuphost ) in hi IRQ ACTIVE LOW
If the second scenario is hit the "ACTIVE LOW" at the end disappears and
things do not work.
Fix this by requesting the GPIO through the "wakeuphostint" mapping instead
which provides active-low info without relying on acpi_dev_gpio_irq_get()
pre-populating this info in the gpio_desc.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2316918
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Fixes: 566f5ca976 ("mei: Add transport driver for IVSC device")
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250214212425.84021-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/all/a1c984288c6e47d956c07339ced486a8ec95f8d5.1738746904.git.namcao@linutronix.de
Add the const qualifier to all the ctl_tables in the tree except for
watchdog_hardlockup_sysctl, memory_allocation_profiling_sysctls,
loadpin_sysctl_table and the ones calling register_net_sysctl (./net,
drivers/inifiniband dirs). These are special cases as they use a
registration function with a non-const qualified ctl_table argument or
modify the arrays before passing them on to the registration function.
Constifying ctl_table structs will prevent the modification of
proc_handler function pointers as the arrays would reside in .rodata.
This is made possible after commit 78eb4ea25c ("sysctl: treewide:
constify the ctl_table argument of proc_handlers") constified all the
proc_handlers.
Created this by running an spatch followed by a sed command:
Spatch:
virtual patch
@
depends on !(file in "net")
disable optional_qualifier
@
identifier table_name != {
watchdog_hardlockup_sysctl,
iwcm_ctl_table,
ucma_ctl_table,
memory_allocation_profiling_sysctls,
loadpin_sysctl_table
};
@@
+ const
struct ctl_table table_name [] = { ... };
sed:
sed --in-place \
-e "s/struct ctl_table .table = &uts_kern/const struct ctl_table *table = \&uts_kern/" \
kernel/utsname_sysctl.c
Reviewed-by: Song Liu <song@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> # for kernel/trace/
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Reviewed-by: Darrick J. Wong <djwong@kernel.org> # xfs
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Here is the "big" set of char/misc/iio and other smaller driver
subsystem updates for 6.14-rc1. Loads of different things in here this
development cycle, highlights are:
- ntsync "driver" to handle Windows locking types enabling Wine to
work much better on many workloads (i.e. games). The driver
framework was in 6.13, but now it's enabled and fully working
properly. Should make many SteamOS users happy. Even comes with
tests!
- Large IIO driver updates and bugfixes
- FPGA driver updates
- Coresight driver updates
- MHI driver updates
- PPS driver updatesa
- const bin_attribute reworking for many drivers
- binder driver updates
- smaller driver updates and fixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ5fGOQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynatACeLlbkhUT544Va1eOL2TkjfcGxrZUAoJ3ymGC0
y0N7/+fWL6aS+b4sEilv
=TU0D
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO driver updates from Greg KH:
"Here is the "big" set of char/misc/iio and other smaller driver
subsystem updates for 6.14-rc1. Loads of different things in here this
development cycle, highlights are:
- ntsync "driver" to handle Windows locking types enabling Wine to
work much better on many workloads (i.e. games). The driver
framework was in 6.13, but now it's enabled and fully working
properly. Should make many SteamOS users happy. Even comes with
tests!
- Large IIO driver updates and bugfixes
- FPGA driver updates
- Coresight driver updates
- MHI driver updates
- PPS driver updatesa
- const bin_attribute reworking for many drivers
- binder driver updates
- smaller driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
ntsync: Fix reference leaks in the remaining create ioctls.
spmi: hisi-spmi-controller: Drop duplicated OF node assignment in spmi_controller_probe()
spmi: Set fwnode for spmi devices
ntsync: fix a file reference leak in drivers/misc/ntsync.c
scripts/tags.sh: Don't tag usages of DECLARE_BITMAP
dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM8750 CPU BWMONs
dt-bindings: interconnect: OSM L3: Document sm8650 OSM L3 compatible
dt-bindings: interconnect: qcom-bwmon: Document QCS615 bwmon compatibles
interconnect: sm8750: Add missing const to static qcom_icc_desc
memstick: core: fix kernel-doc notation
intel_th: core: fix kernel-doc warnings
binder: log transaction code on failure
iio: dac: ad3552r-hs: clear reset status flag
iio: dac: ad3552r-common: fix ad3541/2r ranges
iio: chemical: bme680: Fix uninitialized variable in __bme680_read_raw()
misc: fastrpc: Fix copy buffer page size
misc: fastrpc: Fix registered buffer page address
misc: fastrpc: Deregister device nodes properly in error scenarios
nvmem: core: improve range check for nvmem_cell_write()
nvmem: qcom-spmi-sdam: Set size in struct nvmem_config
...
-----BEGIN PGP SIGNATURE-----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=O62O
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Batch sizing of multiple BARs while memory decoding is disabled
instead of disabling/enabling decoding for each BAR individually;
this optimizes virtualized environments where toggling decoding
enable is expensive (Alex Williamson)
- Add host bridge .enable_device() and .disable_device() hooks for
bridges that need to configure things like Requester ID to StreamID
mapping when enabling devices (Frank Li)
- Extend struct pci_ecam_ops with .enable_device() and
.disable_device() hooks so drivers that use pci_host_common_probe()
instead of their own .probe() have a way to set the
.enable_device() callbacks (Marc Zyngier)
- Drop 'No bus range found' message so we don't complain when DTs
don't specify the default 'bus-range = <0x00 0xff>' (Bjorn Helgaas)
- Rename the drivers/pci/of_property.c struct of_pci_range to
of_pci_range_entry to avoid confusion with the global of_pci_range
in include/linux/of_address.h (Bjorn Helgaas)
Driver binding:
- Update resource request API documentation to encourage callers to
supply a driver name when requesting resources (Philipp Stanner)
- Export pci_intx_unmanaged() and pcim_intx() (always managed) so
callers of pci_intx() (which is sometimes managed) can explicitly
choose the one they need (Philipp Stanner)
- Convert drivers from pci_intx() to always-managed pcim_intx() or
never-managed pci_intx_unmanaged(): amd_sfh, ata (ahci, ata_piix,
pata_rdc, sata_sil24, sata_sis, sata_uli, sata_vsc), bnx2x, bna,
ntb, qtnfmac, rtsx, tifm_7xx1, vfio, xen-pciback (Philipp Stanner)
- Remove pci_intx_unmanaged() since pci_intx() is now always
unmanaged and pcim_intx() is always managed (Philipp Stanner)
Error handling:
- Unexport pcie_read_tlp_log() to encourage drivers to use PCI core
logging rather than building their own (Ilpo Järvinen)
- Move TLP Log handling to its own file (Ilpo Järvinen)
- Store number of supported End-End TLP Prefixes always so we can
read the correct number of DWORDs from the TLP Prefix Log (Ilpo
Järvinen)
- Read TLP Prefixes in addition to the Header Log in
pcie_read_tlp_log() (Ilpo Järvinen)
- Add pcie_print_tlp_log() to consolidate printing of TLP Header and
Prefix Log (Ilpo Järvinen)
- Quirk the Intel Raptor Lake-P PIO log size to accommodate vendor
BIOSes that don't configure it correctly (Takashi Iwai)
ASPM:
- Save parent L1 PM Substates config so when we restore it along with
an endpoint's config, the parent info isn't junk (Jian-Hong Pan)
Power management:
- Avoid D3 for Root Ports on TUXEDO Sirius Gen1 with old BIOS because
the system can't wake up from suspend (Werner Sembach)
Endpoint framework:
- Destroy the EPC device in devm_pci_epc_destroy(), which previously
didn't call devres_release() (Zijun Hu)
- Finish virtual EP removal in pci_epf_remove_vepf(), which
previously caused a subsequent pci_epf_add_vepf() to fail with
-EBUSY (Zijun Hu)
- Write BAR_MASK before iATU registers in pci_epc_set_bar() so we
don't depend on the BAR_MASK reset value being larger than the
requested BAR size (Niklas Cassel)
- Prevent changing BAR size/flags in pci_epc_set_bar() to prevent
reads from bypassing the iATU if we reduced the BAR size (Niklas
Cassel)
- Verify address alignment when programming iATU so we don't attempt
to write bits that are read-only because of the BAR size, which
could lead to directing accesses to the wrong address (Niklas
Cassel)
- Implement artpec6 pci_epc_features so we can rely on all drivers
supporting it so we can use it in EPC core code (Niklas Cassel)
- Check for BARs of fixed size to prevent endpoint drivers from
trying to change their size (Niklas Cassel)
- Verify that requested BAR size is a power of two when endpoint
driver sets the BAR (Niklas Cassel)
Endpoint framework tests:
- Clear pci-epf-test dma_chan_rx, not dma_chan_tx, after freeing
dma_chan_rx (Mohamed Khalfella)
- Correct the DMA MEMCPY test so it doesn't fail if the Endpoint
supports both DMA_PRIVATE and DMA_MEMCPY (Manivannan Sadhasivam)
- Add pci-epf-test and pci_endpoint_test support for capabilities
(Niklas Cassel)
- Add Endpoint test for consecutive BARs (Niklas Cassel)
- Remove redundant comparison from Endpoint BAR test because a > 1MB
BAR can always be exactly covered by iterating with a 1MB buffer
(Hans Zhang)
- Move and convert PCI Endpoint tests from tools/pci to Kselftests
(Manivannan Sadhasivam)
Apple PCIe controller driver:
- Convert StreamID mapping configuration from a bus notifier to the
.enable_device() and .disable_device() callbacks (Marc Zyngier)
Freescale i.MX6 PCIe controller driver:
- Add Requester ID to StreamID mapping configuration when enabling
devices (Frank Li)
- Use DWC core suspend/resume functions for imx6 (Frank Li)
- Add suspend/resume support for i.MX8MQ, i.MX8Q, and i.MX95 (Richard
Zhu)
- Add DT compatible string 'fsl,imx8q-pcie-ep' and driver support for
i.MX8Q series (i.MX8QM, i.MX8QXP, and i.MX8DXL) Endpoints (Frank
Li)
- Add DT binding for optional i.MX95 Refclk and driver support to
enable it if the platform hasn't enabled it (Richard Zhu)
- Configure PHY based on controller being in Root Complex or Endpoint
mode (Frank Li)
- Rely on dbi2 and iATU base addresses from DT via
dw_pcie_get_resources() instead of hardcoding them (Richard Zhu)
- Deassert apps_reset in imx_pcie_deassert_core_reset() since it is
asserted in imx_pcie_assert_core_reset() (Richard Zhu)
- Add missing reference clock enable or disable logic for IMX6SX,
IMX7D, IMX8MM (Richard Zhu)
- Remove redundant imx7d_pcie_init_phy() since
imx7d_pcie_enable_ref_clk() does the same thing (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Simplify by using syscon_regmap_lookup_by_phandle_args() instead
of syscon_regmap_lookup_by_phandle() followed by
of_property_read_u32_array() (Krzysztof Kozlowski)
Marvell MVEBU PCIe controller driver:
- Add MODULE_DEVICE_TABLE() to enable module autoloading (Liao Chen)
MediaTek PCIe Gen3 controller driver:
- Use clk_bulk_prepare_enable() instead of separate
clk_bulk_prepare() and clk_bulk_enable() (Lorenzo Bianconi)
- Rearrange reset assert/deassert so they're both done in the
*_power_up() callbacks (Lorenzo Bianconi)
- Document that Airoha EN7581 requires PHY init and power-on before
PHY reset deassert, unlike other MediaTek Gen3 controllers (Lorenzo
Bianconi)
- Move Airoha EN7581 post-reset delay from the en7581 clock .enable()
method to mtk_pcie_en7581_power_up() (Lorenzo Bianconi)
- Sleep instead of delay during Airoha EN7581 power-up, since this is
a non-atomic context (Lorenzo Bianconi)
- Skip PERST# assertion on Airoha EN7581 during probe and
suspend/resume to avoid a hardware defect (Lorenzo Bianconi)
- Enable async probe to reduce system startup time (Douglas Anderson)
Microchip PolarFlare PCIe controller driver:
- Set up the inbound address translation based on whether the
platform allows coherent or non-coherent DMA (Daire McNamara)
- Update DT binding such that platforms are DMA-coherent by default
and must specify 'dma-noncoherent' if needed (Conor Dooley)
Mobiveil PCIe controller driver:
- Convert mobiveil-pcie.txt to YAML and update 'interrupt-names'
and 'reg-names' (Frank Li)
Qualcomm PCIe controller driver:
- Add DT SM8550 and SM8650 optional 'global' interrupt for link
events (Neil Armstrong)
- Add DT 'compatible' strings for IPQ5424 PCIe controller (Manikanta
Mylavarapu)
- If 'global' IRQ is supported for detection of Link Up events, tell
DWC core not to wait for link up (Krishna chaitanya chundru)
Renesas R-Car PCIe controller driver:
- Avoid passing stack buffer as resource name (King Dix)
Rockchip PCIe controller driver:
- Simplify clock and reset handling by using bulk interfaces (Anand
Moon)
- Pass typed rockchip_pcie (not void) pointer to
rockchip_pcie_disable_clocks() (Anand Moon)
- Return -ENOMEM, not success, when pci_epc_mem_alloc_addr() fails
(Dan Carpenter)
Rockchip DesignWare PCIe controller driver:
- Use dll_link_up IRQ to detect Link Up and enumerate devices so
users don't have to manually rescan (Niklas Cassel)
- Tell DWC core not to wait for link up since the 'sys' interrupt is
required and detects Link Up events (Niklas Cassel)
Synopsys DesignWare PCIe controller driver:
- Don't wait for link up in DWC core if driver can detect Link Up
event (Krishna chaitanya chundru)
- Update ICC and OPP votes after Link Up events (Krishna chaitanya
chundru)
- Always stop link in dw_pcie_suspend_noirq(), which is required at
least for i.MX8QM to re-establish link on resume (Richard Zhu)
- Drop racy and unnecessary LTSSM state check before sending
PME_TURN_OFF message in dw_pcie_suspend_noirq() (Richard Zhu)
- Add struct of_pci_range.parent_bus_addr for devices that need their
immediate parent bus address, not the CPU address, e.g., to program
an internal Address Translation Unit (iATU) (Frank Li)
TI DRA7xx PCIe controller driver:
- Simplify by using syscon_regmap_lookup_by_phandle_args() instead of
syscon_regmap_lookup_by_phandle() followed by
of_parse_phandle_with_fixed_args() or of_property_read_u32_index()
(Krzysztof Kozlowski)
Xilinx Versal CPM PCIe controller driver:
- Add DT binding and driver support for Xilinx Versal CPM5
(Thippeswamy Havalige)
MicroSemi Switchtec management driver:
- Add Microchip PCI100X device IDs (Rakesh Babu Saladi)
Miscellaneous:
- Move reset related sysfs code from pci.c to pci-sysfs.c where other
similar code lives (Ilpo Järvinen)
- Simplify reset_method_store() memory management by using __free()
instead of explicit kfree() cleanup (Ilpo Järvinen)
- Constify struct bin_attribute for sysfs, VPD, P2PDMA, and the IBM
ACPI hotplug driver (Thomas Weißschuh)
- Remove redundant PCI_VSEC_HDR and PCI_VSEC_HDR_LEN_SHIFT (Dongdong
Zhang)
- Correct documentation of the 'config_acs=' kernel parameter
(Akihiko Odaki)"
* tag 'pci-v6.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (111 commits)
PCI: Batch BAR sizing operations
dt-bindings: PCI: microchip,pcie-host: Allow dma-noncoherent
PCI: microchip: Set inbound address translation for coherent or non-coherent mode
Documentation: Fix pci=config_acs= example
PCI: Remove redundant PCI_VSEC_HDR and PCI_VSEC_HDR_LEN_SHIFT
PCI: Don't include 'pm_wakeup.h' directly
selftests: pci_endpoint: Migrate to Kselftest framework
selftests: Move PCI Endpoint tests from tools/pci to Kselftests
misc: pci_endpoint_test: Fix IOCTL return value
dt-bindings: PCI: qcom: Document the IPQ5424 PCIe controller
dt-bindings: PCI: qcom,pcie-sm8550: Document 'global' interrupt
dt-bindings: PCI: mobiveil: Convert mobiveil-pcie.txt to YAML
PCI: switchtec: Add Microchip PCI100X device IDs
misc: pci_endpoint_test: Remove redundant 'remainder' test
misc: pci_endpoint_test: Add consecutive BAR test
misc: pci_endpoint_test: Add support for capabilities
PCI: endpoint: pci-epf-test: Add support for capabilities
PCI: endpoint: pci-epf-test: Fix check for DMA MEMCPY test
PCI: endpoint: pci-epf-test: Set dma_chan_rx pointer to NULL on error
PCI: dwc: Simplify config resource lookup
...
IOCTLs are supposed to return 0 for success and negative error codes for
failure. Currently, this driver is returning 0 for failure and 1 for
success, that's not correct. Hence, fix it!
Link: https://lore.kernel.org/r/20250116171650.33585-3-manivannan.sadhasivam@linaro.org
Fixes: 2c156ac71c ("misc: Add host side PCI driver for PCI test function device")
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Closes: https://lore.kernel.org/r/YvzNg5ROnxEApDgS@kroah.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
A BAR size is always a power of two. buf_size = min(SZ_1M, bar_size).
If the BAR size is <= 1MB, there will be one iteration, no remainder.
If the BAR size is > 1MB, there will be more than one iteration, but the
size will always be evenly divisible by 1MB, so no remainder.
Link: https://lore.kernel.org/r/20250109094556.1724663-2-18255117159@163.com
Suggested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add a more advanced BAR test that writes all BARs in one go, and then reads
them back and verifies that the value matches the BAR number bitwise OR'ed
with offset, this allows us to verify:
- The BAR number was what we intended to read
- The offset was what we intended to read
This allows us to detect potential address translation issues on the EP.
Reading back the BAR directly after writing will not allow us to detect the
case where inbound address translation on the endpoint incorrectly causes
multiple BARs to be redirected to the same memory region (within the EP).
Link: https://lore.kernel.org/r/20241116032045.2574168-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The test BAR is on the EP side is allocated using pci_epf_alloc_space(),
which allocates the backing memory using dma_alloc_coherent(), which will
return zeroed memory regardless of __GFP_ZERO was set or not.
This means that running a new version of pci-endpoint-test.c (host side)
with an old version of pci-epf-test.c (EP side) will not see any
capabilities being set (as intended), so this is backwards compatible.
Additionally, the EP side always allocates at least 128 bytes for the test
BAR (excluding the MSI-X table), this means that adding another register at
offset 0x30 is still within the 128 available bytes.
For now, we only add the CAP_UNALIGNED_ACCESS capability.
If CAP_UNALIGNED_ACCESS is set, that means that the EP side supports
reading/writing to an address without any alignment requirements.
Thus, if CAP_UNALIGNED_ACCESS is set, make sure that the host side does
not add any extra padding to the buffers that we allocate (which was only
done in order to get the buffers to satisfy certain alignment requirements
by the endpoint controller).
Link: https://lore.kernel.org/r/20241203063851.695733-6-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
- Add preempt lazy support
- Deprecate cxl and cxl flash driver
- Fix a possible IOMMU related OOPS at boot on pSeries
- Optimize sched_clock() in ppc32 by replacing mulhdu() by mul_u64_u64_shr()
Thanks to: Andrew Donnellan, Andy Shevchenko, Ankur Arora, Christophe Leroy,
Frederic Barrat, Gaurav Batra, Luis Felipe Hernandez, Michael Ellerman, Nilay
Shroff, Ricardo B. Marliere, Ritesh Harjani (IBM), Sebastian Andrzej Siewior,
Shrikanth Hegde, Sourabh Jain, Thorsten Blum, Zhu Jun.
-----BEGIN PGP SIGNATURE-----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=ctY4
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- Add preempt lazy support
- Deprecate cxl and cxl flash driver
- Fix a possible IOMMU related OOPS at boot on pSeries
- Optimize sched_clock() in ppc32 by replacing mulhdu() by
mul_u64_u64_shr()
Thanks to Andrew Donnellan, Andy Shevchenko, Ankur Arora, Christophe
Leroy, Frederic Barrat, Gaurav Batra, Luis Felipe Hernandez, Michael
Ellerman, Nilay Shroff, Ricardo B. Marliere, Ritesh Harjani (IBM),
Sebastian Andrzej Siewior, Shrikanth Hegde, Sourabh Jain, Thorsten Blum,
and Zhu Jun.
* tag 'powerpc-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix argument order to timer_sub()
powerpc/prom_init: Use IS_ENABLED()
powerpc/pseries/iommu: IOMMU incorrectly marks MMIO range in DDW
powerpc: Use str_on_off() helper in check_cache_coherency()
powerpc: Large user copy aware of full:rt:lazy preemption
powerpc: Add preempt lazy support
powerpc/book3s64/hugetlb: Fix disabling hugetlb when fadump is active
powerpc/vdso: Mark the vDSO code read-only after init
powerpc/64: Use get_user() in start_thread()
macintosh: declare ctl_table as const
selftest/powerpc/ptrace: Cleanup duplicate macro definitions
selftest/powerpc/ptrace/ptrace-pkey: Remove duplicate macros
selftest/powerpc/ptrace/core-pkey: Remove duplicate macros
powerpc/8xx: Drop legacy-of-mm-gpiochip.h header
scsi/cxlflash: Deprecate driver
cxl: Deprecate driver
selftests/powerpc: Fix typo in test-vphn.c
powerpc/xmon: Use str_yes_no() helper in dump_one_paca()
powerpc/32: Replace mulhdu() by mul_u64_u64_shr()
When ntsync_obj_get_fd() fails, we free the ntsync object but forget to drop the
"file" member.
This was fixed for semaphores in 0e7d523b5f, but
that commit did not fix the similar leak for events and mutexes, since they were
part of patches not yet in the mainline kernel. Fix those cases.
Fixes: 5bc2479a35 "ntsync: Introduce NTSYNC_IOC_CREATE_MUTEX."
Fixes: 4c7404b9c2 "ntsync: Introduce NTSYNC_IOC_CREATE_EVENT."
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20250116190717.8923-1-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
struct ntsync_obj contains a reference to struct file
and that reference contributes to refcount - ntsync_alloc_obj()
grabs it. Normally the object is destroyed (and reference
to obj->file dropped) in ntsync_obj_release(). However, in
case of ntsync_obj_get_fd() failure the object is destroyed
directly by its creator.
That case should also drop obj->file; plain kfree(obj)
is not enough there - it ends up leaking struct file * reference.
Take that logics into a helper (ntsync_free_obj()) and
use it in both codepaths that destroy ntsync_obj instances.
Fixes: b46271ec40 "ntsync: Introduce NTSYNC_IOC_CREATE_SEM"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20250115025002.GA1977892@ZenIV
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need the IIO fixes in here as well, and it resolves a merge conflict
in:
drivers/iio/adc/ti-ads1119.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For non-registered buffer, fastrpc driver copies the buffer and
pass it to the remote subsystem. There is a problem with current
implementation of page size calculation which is not considering
the offset in the calculation. This might lead to passing of
improper and out-of-bounds page size which could result in
memory issue. Calculate page start and page end using the offset
adjusted address instead of absolute address.
Fixes: 02b45b47fb ("misc: fastrpc: fix remote page size calculation")
Cc: stable@kernel.org
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20250110134239.123603-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For registered buffers, fastrpc driver sends the buffer information
to remote subsystem. There is a problem with current implementation
where the page address is being sent with an offset leading to
improper buffer address on DSP. This is leads to functional failures
as DSP expects base address in page information and extracts offset
information from remote arguments. Mask the offset and pass the base
page address to DSP.
This issue is observed is a corner case when some buffer which is registered
with fastrpc framework is passed with some offset by user and then the DSP
implementation tried to read the data. As DSP expects base address and takes
care of offsetting with remote arguments, passing an offsetted address will
result in some unexpected data read in DSP.
All generic usecases usually pass the buffer as it is hence is problem is
not usually observed. If someone tries to pass offsetted buffer and then
tries to compare data at HLOS and DSP end, then the ambiguity will be observed.
Fixes: 80f3afd72b ("misc: fastrpc: consider address offset before sending to DSP")
Cc: stable@kernel.org
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20250110134239.123603-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During fastrpc_rpmsg_probe, if secure device node registration
succeeds but non-secure device node registration fails, the secure
device node deregister is not called during error cleanup. Add proper
exit paths to ensure proper cleanup in case of error.
Fixes: 3abe3ab3cd ("misc: fastrpc: add secure domain support")
Cc: stable@kernel.org
Signed-off-by: Anandu Krishnan E <quic_anane@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20250110134239.123603-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit reintroduces interrupt-based card detection previously
used in the rts5139 driver. This functionality was removed in commit
00d8521dcd ("staging: remove rts5139 driver code").
Reintroducing this mechanism fixes presence detection for certain card
readers, which with the current driver, will taken approximately 20
seconds to enter S3 as `mmc_rescan` has to be frozen.
Fixes: 00d8521dcd ("staging: remove rts5139 driver code")
Cc: stable@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Link: https://lore.kernel.org/r/20241119085815.11769-1-sean@starlabs.systems
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The information passed as request tgid and pid is actually the
client id of the process. This client id is used as an
identifier by DSP to identify the DSP PD corresponding to the
process. Currently process tgid is getting passed as the
identifier which is getting replaced by a custom client id.
Rename the data which uses this client id.
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20250110134308.123739-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Memory intensive applications(which requires more tha 4GB) that wants
to offload tasks to DSP might have to split the tasks to multiple
user PD to make the resources available.
For every call to DSP, fastrpc driver passes the process tgid which
works as an identifier for the DSP to enqueue the tasks to specific PD.
With current design, if any process opens device node more than once
and makes PD init request, same tgid will be passed to DSP which will
be considered a bad request and this will result in failure as the same
identifier cannot be used for multiple DSP PD.
Assign and pass a client ID to DSP which would be assigned during device
open and will be dependent on the index of session allocated for the PD.
This will allow the same process to open the device more than once and
spawn multiple dynamic PD for ease of processing.
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20250110134308.123739-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unloading the cp500 module leads to the following warning:
kernfs: can not remove 'eeprom', no directory
WARNING: CPU: 1 PID: 1610 at fs/kernfs/dir.c:1683 kernfs_remove_by_name_ns+0xb1/0xc0
The parent I2C device of the nvmem devices is freed before the nvmem
devices. The reference to the nvmem devices is put by devm after
cp500_remove(), but at this time the parent I2C device does not exist
anymore as the I2C controller and its devices have already been freed in
cp500_remove(). Thus, nvmem tries to remove an entry from an already
deleted directory.
Free nvmem devices before I2C controller auxiliary device.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20241214215759.60811-1-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drivers should depend on configurations that can be user-configurable
instead of selecting them.
Without this patch, OF cannot be disabled this way:
make allyesconfig
scripts/config -d OF
make olddefconfig
Which is a typical test in CI systems like media-ci.
Now that we are at it, remove the dependency on OF, it will come
automatically from OF_OVERLAY.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20241129-lan966x-depend-v2-1-72bb9397f421@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver returns -EOPNOTSUPPORTED on unsupported parameters case in set
config. Upper level driver checks for -ENOTSUPP. Because of the return
code mismatch, the ioctls from userspace fail. Resolve the issue by
passing -ENOTSUPP during unsupported case.
Fixes: 7d3e4d807d ("misc: microchip: pci1xxxx: load gpio driver for the gpio controller auxiliary device enumerated by the auxiliary bus driver.")
Cc: stable <stable@kernel.org>
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20241205133626.1483499-3-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Resolve kernel panic caused by improper handling of IRQs while
accessing GPIO values. This is done by replacing generic_handle_irq with
handle_nested_irq.
Fixes: 1f4d8ae231 ("misc: microchip: pci1xxxx: Add gpio irq handler and irq helper functions irq_ack, irq_mask, irq_unmask and irq_set_type of irq_chip.")
Cc: stable <stable@kernel.org>
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20241205133626.1483499-2-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
f5b335dc02 ("misc: ntsync: mark driver as "broken"
to prevent from building") was committed to avoid the driver being used while
only part of its functionality was released. Since the rest of the functionality
has now been committed, revert this.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241213193511.457338-31-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NT waits can optionally be made "alertable". This is a special channel for
thread wakeup that is mildly similar to SIGIO. A thread has an internal single
bit of "alerted" state, and if a thread is alerted while an alertable wait, the
wait will return a special value, consume the "alerted" state, and will not
consume any of its objects.
Alerts are implemented using events; the user-space NT emulator is expected to
create an internal ntsync event for each thread and pass that event to wait
functions.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241213193511.457338-16-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This corresponds to the NT syscall NtQueryEvent().
This returns the signaled state of the event and whether it is manual-reset.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-15-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This corresponds to the NT syscall NtQueryMutant().
This returns the recursion count, owner, and abandoned state of the mutex.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-14-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This corresponds to the NT syscall NtQuerySemaphore().
This returns the current count and maximum count of the semaphore.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-13-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This corresponds to the NT syscall NtPulseEvent().
This wakes up any waiters as if the event had been set, but does not set the
event, instead resetting it if it had been signalled. Thus, for a manual-reset
event, all waiters are woken, whereas for an auto-reset event, at most one
waiter is woken.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241213193511.457338-12-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This corresponds to the NT syscall NtResetEvent().
This sets the event to the unsignaled state, and returns its previous state.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241213193511.457338-11-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This corresponds to the NT syscall NtSetEvent().
This sets the event to the signaled state, and returns its previous state.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-10-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This correspond to the NT syscall NtCreateEvent().
An NT event holds a single bit of state denoting whether it is signaled or
unsignaled.
There are two types of events: manual-reset and automatic-reset. When an
automatic-reset event is acquired via a wait function, its state is reset to
unsignaled. Manual-reset events are not affected by wait functions.
Whether the event is manual-reset, and its initial state, are specified at
creation time.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-9-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This does not correspond to any NT syscall. Rather, when a thread dies, it
should be called by the NT emulator for each mutex, with the TID of the dying
thread.
NT mutexes are robust (in the pthread sense). When an NT thread dies, any
mutexes it owned are immediately released. Acquisition of those mutexes by other
threads will return a special value indicating that the mutex was abandoned,
like EOWNERDEAD returned from pthread_mutex_lock(), and EOWNERDEAD is indeed
used here for that purpose.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-8-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This corresponds to the NT syscall NtReleaseMutant().
This syscall decrements the mutex's recursion count by one, and returns the
previous value. If the mutex is not owned by the current task, the function
instead fails and returns -EPERM.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-7-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This corresponds to the NT syscall NtCreateMutant().
An NT mutex is recursive, with a 32-bit recursion counter. When acquired via
NtWaitForMultipleObjects(), the recursion counter is incremented by one. The OS
records the thread which acquired it.
The OS records the thread which acquired it. However, in order to keep this
driver self-contained, the owning thread ID is managed by user-space, and passed
as a parameter to all relevant ioctls.
The initial owner and recursion count, if any, are specified when the mutex is
created.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-6-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is similar to NTSYNC_IOC_WAIT_ANY, but waits until all of the objects are
simultaneously signaled, and then acquires all of them as a single atomic
operation.
Because acquisition of multiple objects is atomic, some complex locking is
required. We cannot simply spin-lock multiple objects simultaneously, as that
may disable preëmption for a problematically long time.
Instead, modifying any object which may be involved in a wait-all operation takes
a device-wide sleeping mutex, "wait_all_lock", instead of the normal object
spinlock.
Because wait-for-all is a rare operation, in order to optimize wait-for-any,
this lock is only taken when necessary. "all_hint" is used to mark objects which
are involved in a wait-for-all operation, and if an object is not, only its
spinlock is taken.
The locking scheme used here was written by Peter Zijlstra.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-5-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This corresponds to part of the functionality of the NT syscall
NtWaitForMultipleObjects(). Specifically, it implements the behaviour where
the third argument (wait_any) is TRUE, and it does not handle alertable waits.
Those features have been split out into separate patches to ease review.
This patch therefore implements the wait/wake infrastructure which comprises the
core of ntsync's functionality.
NTSYNC_IOC_WAIT_ANY is a vectored wait function similar to poll(). Unlike
poll(), it "consumes" objects when they are signaled. For semaphores, this means
decreasing one from the internal counter. At most one object can be consumed by
this function.
This wait/wake model is fundamentally different from that used anywhere else in
the kernel, and for that reason ntsync does not use any existing infrastructure,
such as futexes, kernel mutexes or semaphores, or wait_event().
Up to 64 objects can be waited on at once. As soon as one is signaled, the
object with the lowest index is consumed, and that index is returned via the
"index" field.
A timeout is supported. The timeout is passed as a u64 nanosecond value, which
represents absolute time measured against either the MONOTONIC or REALTIME clock
(controlled by the flags argument). If U64_MAX is passed, the ioctl waits
indefinitely.
This ioctl validates that all objects belong to the relevant device. This is not
necessary for any technical reason related to NTSYNC_IOC_WAIT_ANY, but will be
necessary for NTSYNC_IOC_WAIT_ALL introduced in the following patch.
Some padding fields are added for alignment and for fields which will be added
in future patches (split out to ease review).
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-4-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the more common "release" terminology, which is also the term used by NT,
instead of "post" (which is used by POSIX).
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-3-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify the user API a bit by returning the fd as return value from the ioctl
instead of through the argument pointer.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20241213193511.457338-2-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Modifying the size of the global bin_attribute instance can be racy.
Instead use the new .bin_size callback to do so safely.
For this to work move the initialization of c2dev->ops before the call
to device_create() as the size callback will need access to it.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20241221-sysfs-const-bin_attr-misc-drivers-v2-4-ba5e79fe8771@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Link: https://lore.kernel.org/r/20241221-sysfs-const-bin_attr-misc-drivers-v2-2-ba5e79fe8771@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Link: https://lore.kernel.org/r/20241221-sysfs-const-bin_attr-misc-drivers-v2-1-ba5e79fe8771@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The cxl driver is no longer actively maintained and we intend to remove it
in a future kernel release.
cxl has received minimal maintenance for several years, and is not
supported on the Power10 processor. We aren't aware of any users who are
likely to be using recent kernels.
Change its MAINTAINERS status to obsolete, update the sysfs ABI
documentation accordingly, add a warning message on device probe, change
the Kconfig options to label it as deprecated, and don't build it by
default.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241210054055.144813-2-ajd@linux.ibm.com
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is a small set of tty and serial driver updates for 6.13-rc1.
Nothing major at all this time, only some small changes:
- few device tree binding updates
- 8250_exar serial driver updates
- imx serial driver updates
- sprd_serial driver updates
- other tiny serial driver updates, full details in the shortlog
All of these have been in linux-next for a while with one reported
issue, but that commit has now been reverted.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0s3DA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykmgQCeIDU0GHWFuzEiZNmsO5bLN8AcoFQAn1rlOaHu
9lOOf7xVSCUBU0GgynI5
=SEtJ
-----END PGP SIGNATURE-----
Merge tag 'tty-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is a small set of tty and serial driver updates for 6.13-rc1.
Nothing major at all this time, only some small changes:
- few device tree binding updates
- 8250_exar serial driver updates
- imx serial driver updates
- sprd_serial driver updates
- other tiny serial driver updates, full details in the shortlog
All of these have been in linux-next for a while with one reported
issue, but that commit has now been reverted"
* tag 'tty-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (37 commits)
Revert "serial: sh-sci: Clean sci_ports[0] after at earlycon exit"
serial: amba-pl011: fix build regression
dt-bindings: serial: Add a new compatible string for ums9632
serial: sprd: Add support for sc9632
tty/serial/altera_uart: unwrap error log string
tty/serial/altera_jtaguart: unwrap error log string
serial: amba-pl011: Fix RX stall when DMA is used
tty: ldsic: fix tty_ldisc_autoload sysctl's proc_handler
serial: 8250_fintek: Add support for F81216E
serial: sh-sci: Clean sci_ports[0] after at earlycon exit
tty: atmel_serial: Fix typo retreives to retrieves
tty: atmel_serial: Use devm_platform_ioremap_resource()
serial: 8250: omap: Move pm_runtime_get_sync
tty: serial: samsung: Add Exynos8895 compatible
dt-bindings: serial: samsung: Add samsung,exynos8895-uart compatible
serial: 8250_dw: Add Sophgo SG2044 quirk
dt-bindings: serial: snps-dw-apb-uart: Add Sophgo SG2044 uarts
dt-bindings: serial: snps,dw-apb-uart: merge duplicate compatible entry.
altera_jtaguart: Use dev_err() to report error attaching IRQ
altera_uart: Use dev_err() to report error attaching IRQ handler
...
Here is the "big and hairy" char/misc/iio and other small driver
subsystem updates for 6.13-rc1. Sorry for doing this at the end of the
merge window, conference and holiday travel got in the way on my side
(hence the 5am pull request emails...)
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible. I think this is the tipping point,
expect to see way more rust drivers going forward now that these
bindings are present. Next merge window hopefully we will have pci
and platform drivers working, which will fully enable almost all
driver subsystems to start accepting (or at least getting) rust
drivers. This is the end result of a lot of work from a lot of
people, congrats to all of them for getting this far, you've proved
many of us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
Note, there is a semi-hairy rust merge conflict when pulling this. The
resolution has been in linux-next for a while and can be seen here:
https://lore.kernel.org/all/20241111173459.2646d4af@canb.auug.org.au/
All of these have been in linux-next for a while, with no other reported
issues other than that merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0lGpg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykKHQCgvI4Muu2tpdINBVe24Zc8S3ozg0AAnRNg3F7r
ikneftUDYtuviSGU/Rs8
=CW+i
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/whatever driver subsystem updates from Greg KH:
"Here is the 'big and hairy' char/misc/iio and other small driver
subsystem updates for 6.13-rc1.
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible.
I think this is the tipping point, expect to see way more rust
drivers going forward now that these bindings are present. Next
merge window hopefully we will have pci and platform drivers
working, which will fully enable almost all driver subsystems to
start accepting (or at least getting) rust drivers.
This is the end result of a lot of work from a lot of people,
congrats to all of them for getting this far, you've proved many of
us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
All of these have been in linux-next for a while, with no other
reported issues other than that merge conflict"
* tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (401 commits)
mei: vsc: Fix typo "maintstepping" -> "mainstepping"
firmware: Switch back to struct platform_driver::remove()
misc: isl29020: Fix the wrong format specifier
scripts/tags.sh: Don't tag usages of DEFINE_MUTEX
fpga: Switch back to struct platform_driver::remove()
mei: vsc: Improve error logging in vsc_identify_silicon()
mei: vsc: Do not re-enable interrupt from vsc_tp_reset()
dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible
dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188
spmi: pmic-arb: fix return path in for_each_available_child_of_node()
iio: Move __private marking before struct element priv in struct iio_dev
docs: iio: ad7380: add adaq4370-4 and adaq4380-4
iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
iio: adc: ad7380: use local dev variable to shorten long lines
iio: adc: ad7380: fix oversampling formula
dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR
bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian
misc: atmel-ssc: Use of_property_present() for non-boolean properties
misc: keba: Add hardware dependency
...
Here is a small set of driver core changes for 6.13-rc1.
Nothing major for this merge cycle, except for the 2 simple merge
conflicts are here just to make life interesting.
Included in here are:
- sysfs core changes and preparations for more sysfs api cleanups that
can come through all driver trees after -rc1 is out
- fw_devlink fixes based on many reports and debugging sessions
- list_for_each_reverse() removal, no one was using it!
- last-minute seq_printf() format string bug found and fixed in many
drivers all at once.
- minor bugfixes and changes full details in the shortlog
As mentioned above, there is 2 merge conflicts with your tree, one is
where the file is removed (easy enough to resolve), the second is a
build time error, that has been found in linux-next and the fix can be
seen here:
https://lore.kernel.org/r/20241107212645.41252436@canb.auug.org.au
Other than that, the changes here have been in linux-next with no other
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0lEog8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym+0ACgw6wN+LkLVIHWhxTq5DYHQ0QCxY8AoJrRIcKe
78h0+OU3OXhOy8JGz62W
=oI5S
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is a small set of driver core changes for 6.13-rc1.
Nothing major for this merge cycle, except for the two simple merge
conflicts are here just to make life interesting.
Included in here are:
- sysfs core changes and preparations for more sysfs api cleanups
that can come through all driver trees after -rc1 is out
- fw_devlink fixes based on many reports and debugging sessions
- list_for_each_reverse() removal, no one was using it!
- last-minute seq_printf() format string bug found and fixed in many
drivers all at once.
- minor bugfixes and changes full details in the shortlog"
* tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits)
Fix a potential abuse of seq_printf() format string in drivers
cpu: Remove spurious NULL in attribute_group definition
s390/con3215: Remove spurious NULL in attribute_group definition
perf: arm-ni: Remove spurious NULL in attribute_group definition
driver core: Constify bin_attribute definitions
sysfs: attribute_group: allow registration of const bin_attribute
firmware_loader: Fix possible resource leak in fw_log_firmware_info()
drivers: core: fw_devlink: Fix excess parameter description in docstring
driver core: class: Correct WARN() message in APIs class_(for_each|find)_device()
cacheinfo: Use of_property_present() for non-boolean properties
cdx: Fix cdx_mmap_resource() after constifying attr in ->mmap()
drivers: core: fw_devlink: Make the error message a bit more useful
phy: tegra: xusb: Set fwnode for xusb port devices
drm: display: Set fwnode for aux bus devices
driver core: fw_devlink: Stop trying to optimize cycle detection logic
driver core: Constify attribute arguments of binary attributes
sysfs: bin_attribute: add const read/write callback variants
sysfs: implement all BIN_ATTR_* macros in terms of __BIN_ATTR()
sysfs: treewide: constify attribute callback of bin_attribute::llseek()
sysfs: treewide: constify attribute callback of bin_attribute::mmap()
...
i2c-core (Wolfram)
- drivers can now use a GPIO as a side channel for SMBus Alerts
using a generic binding
- regular stuff like mem leak fix, Makefile maintenance...
i2c-host updates (Andi)
Major Improvements and Refactoring:
- All controllers using the 'remove_new' callback have been
reverted to use the 'remove' callback.
- Intel SCH controller underwent significant refactoring,
this brings love and a modern look to the driver.
- PIIX4 driver refactored to enable usage by other drivers
(e.g., AMD ASF).
- iMX/MXC improved message handling to reduce protocol overhead:
Refactored DMA/non-DMA read/write and bus polling mechanisms
to achieve this.
- ACPI documentation for PIIX4.
New Features:
- i2c-cadence added support for atomic transfers.
- Qualcomm CII added support for a 32MHz serial engine clock.
Deprecated Features:
- Dropped outdated support for AMD756 S4882 and NFORCE2 S4985. If
somebody misses this, Jean will rewrite support using the proper
i2c mux framework.
New Hardware Support:
- Added support for:
- Intel Panther Lake (new ID)
- AMD ASF (new driver)
- S32G2/S32G3 SoCs (new ID)
- Realtek RTL I2C Controller (new driver)
- HJMC01 DesignWare ACPI HID (new ID)
- PIC64GX to Microchip Core (new ID)
- Qualcomm SDM670 to Qualcomm CCI (new ID)
at24 updates (Bartosz)
- add support for the lockable page on ST M24256E
-----BEGIN PGP SIGNATURE-----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=lrn5
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Core:
- drivers can now use a GPIO as a side channel for SMBus Alerts using
a generic binding
- regular stuff like mem leak fix, Makefile maintenance...
Host improvements and refactoring:
- All controllers using the 'remove_new' callback have been reverted
to use the 'remove' callback
- Intel SCH controller underwent significant refactoring, this brings
love and a modern look to the driver
- PIIX4 driver refactored to enable usage by other drivers (e.g., AMD
ASF)
- iMX/MXC improved message handling to reduce protocol overhead:
Refactored DMA/non-DMA read/write and bus polling mechanisms to
achieve this.
- ACPI documentation for PIIX4
New host features:
- i2c-cadence support for atomic transfers
- Qualcomm CII support for a 32MHz serial engine clock
Deprecated features:
- Dropped outdated support for AMD756 S4882 and NFORCE2 S4985. If
somebody misses this, Jean will rewrite support using the proper
i2c mux framework.
New hardware IDs for existing drivers:
- Intel Panther Lake
- S32G2/S32G3 SoCs
- HJMC01 DesignWare ACPI HID
- PIC64GX to Microchip Core
- Qualcomm SDM670 to Qualcomm CCI
New drivers:
- AMD ASF
- Realtek RTL I2C Controller
at24 updates:
- add support for the lockable page on ST M24256E"
* tag 'i2c-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (59 commits)
docs: i2c: piix4: Add ACPI section
i2c: Add driver for the RTL9300 I2C controller
i2c: qcom-cci: Remove unused struct member cci_clk_rate
dt-bindings: i2c: Add Realtek RTL I2C Controller
i2c: busses: Use *-y instead of *-objs in Makefile
i2c: imx: add support for S32G2/S32G3 SoCs
dt-bindings: i2c: imx: add SoC specific compatible strings for S32G
i2c: qcom-cci: Remove the unused variable cci_clk_rate
i2c: Drop legacy muxing pseudo-drivers
i2c: imx: prevent rescheduling in non dma mode
i2c: imx: separate atomic, dma and non-dma use case
i2c: imx: do not poll for bus busy in single master mode
i2c: designware: Add a new ACPI HID for HJMC01 I2C controller
i2c: qcom-geni: Keep comment why interrupts start disabled
dt-bindings: i2c: microchip: corei2c: Add PIC64GX as compatible with driver
i2c: designware: constify abort_sources
i2c: Switch back to struct platform_driver::remove()
i2c: qcom-geni: Support systems with 32MHz serial engine clock
i2c: qcom-cci: Stop complaining about DT set clock rate
dt-bindings: i2c: qcom-cci: Document SDM670 compatible
...
Nothing particular important in the SoC driver updates, just the usual
improvements to for drivers/soc and a couple of subsystems that don't
fit anywhere else:
- The largest set of updates is for Qualcomm SoC drivers, extending the
set of supported features for additional SoCs in the QSEECOM, LLCC
and socinfo drivers.a
- The ti_sci firmware driver gains support for power managment
- The drivers/reset subsystem sees a rework of the microchip
sparx5 and amlogic reset drivers to support additional chips,
plus a few minor updates on other platforms
- The SCMI firmware interface driver gains support for two protocol
extensions, allowing more flexible use of the shared memory area
and new DT binding properties for configurability.
- Mediatek SoC drivers gain support for power managment on the MT8188
SoC and a new driver for DVFS.
- The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
and a few bugfixes
- The Hisilicon Kunpeng HCCS driver gains support for configuring
lanes through sysfs
Finally, there are cleanups and minor fixes for drivers/soc, drivers/bus,
and drivers/memory, including changing back the .remove_new callback
to .remove, as well as a few other updates for freescale (powerpc)
soc drivers, NXP i.MX soc drivers, cznic turris platform driver, memory
controller drviers, TI OMAP SoC drivers, and Tegra firmware drivers
-----BEGIN PGP SIGNATURE-----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=xeCE
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Nothing particular important in the SoC driver updates, just the usual
improvements to for drivers/soc and a couple of subsystems that don't
fit anywhere else:
- The largest set of updates is for Qualcomm SoC drivers, extending
the set of supported features for additional SoCs in the QSEECOM,
LLCC and socinfo drivers.a
- The ti_sci firmware driver gains support for power managment
- The drivers/reset subsystem sees a rework of the microchip sparx5
and amlogic reset drivers to support additional chips, plus a few
minor updates on other platforms
- The SCMI firmware interface driver gains support for two protocol
extensions, allowing more flexible use of the shared memory area
and new DT binding properties for configurability.
- Mediatek SoC drivers gain support for power managment on the MT8188
SoC and a new driver for DVFS.
- The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
and a few bugfixes
- The Hisilicon Kunpeng HCCS driver gains support for configuring
lanes through sysfs
Finally, there are cleanups and minor fixes for drivers/{soc, bus,
memory}, including changing back the .remove_new callback to .remove,
as well as a few other updates for freescale (powerpc) soc drivers,
NXP i.MX soc drivers, cznic turris platform driver, memory controller
drviers, TI OMAP SoC drivers, and Tegra firmware drivers"
* tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (116 commits)
soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure
soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting()
soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped()
platform: cznic: turris-omnia-mcu: Rename variable holding GPIO line names
platform: cznic: turris-omnia-mcu: Document the driver private data structure
firmware: turris-mox-rwtm: Document the driver private data structure
bus: Switch back to struct platform_driver::remove()
soc: qcom: ice: Remove the device_link field in qcom_ice
drm/msm/adreno: Setup SMMU aparture for per-process page table
firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
soc: qcom: llcc: Flip the manual slice configuration condition
dt-bindings: firmware: qcom,scm: Document sm8750 SCM
firmware: qcom: uefisecapp: Allow X1E Devkit devices
misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'
misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'
soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
...
Improvements and Refactoring:
- All controllers using the 'remove_new' callback have been
reverted to use the 'remove' callback.
- Makefile improvements (switched from '*-objs' to '*-y')
- Intel SCH controller underwent significant refactoring:
- Improved usage of private data references.
- Transitioned to memory-mapped I/O functions.
- Adopted 'devm' functions for resource management.
- Added kernel-doc compatible comments.
- Used 'const' where applicable.
- Numerous smaller refinements.
This brings love and a modern look to the driver.
- Additional cleanups in the DesignWare driver.
- PIIX4 driver updates:
- Exposed functions and definitions in the header file to
enable usage by other drivers (e.g., AMD ASF).
- Nuvoton NPCM I2C controller:
- Enhanced read/write operations and bus error (BER) flag
management to address corner cases that could lead to
timeouts.
- Qualcomm CCI driver received several cleanups.
- iMX/MXC:
- Improved message handling to reduce I2C protocol overhead.
- Refactored DMA/non-DMA read/write and bus polling mechanisms
to achieve this.
New Features:
- i2c-cadence:
- Added support for atomic transfers.
- Refactored to group generic code into separate functions.
- Qualcomm CCI:
- Added support for a 32MHz serial engine clock.
- Added support for:
- HJMC01 DesignWare ACPI HID.
- ACPI documentation for PIIX4.
Deprecated Features:
- Dropped support for AMD756 S4882 and NFORCE2 S4985.
New Hardware Support:
- Added support for:
- Intel Panther Lake.
- AMD ASF.
- S32G2/S32G3 SoCs.
- Realtek RTL I2C Controller.
- New drivers:
- 'i2c-amd-asf-plat.c' for AMD ASF.
- 'i2c-rtl9300.c' for Realtek RTL.
Fixes:
- AMD ASF driver:
- Fixed an uninitialised 'len' variable.
Devicetree Updates:
- Documented Qualcomm SDM670.
- Added 'PIC64GX' compatibility to Microchip Core I2C binding.
- Added support for S32G.
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCZznN0xYcYW5kaS5zaHl0
aUBrZXJuZWwub3JnAAoJENp4BWYm0y1unOcA+wdXrf10ntY7jsGdd17dKQ951k7m
mPG1xfDXF/qbDa2bAQCKYGVBwv/efAREtthq9zhfIcRxgefH7iKQIUm2YOcCCw==
=xYzW
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host updates for v6.13, part 1
Major Improvements and Refactoring:
- All controllers using the 'remove_new' callback have been
reverted to use the 'remove' callback.
- Intel SCH controller underwent significant refactoring,
this brings love and a modern look to the driver.
- PIIX4 driver refactored to enable usage by other drivers
(e.g., AMD ASF).
- iMX/MXC improved message handling to reduce protocol overhead:
Refactored DMA/non-DMA read/write and bus polling mechanisms
to achieve this.
- ACPI documentation for PIIX4.
New Features:
- i2c-cadence added support for atomic transfers.
- Qualcomm CII added support for a 32MHz serial engine clock.
Deprecated Features:
- Dropped outdated support for AMD756 S4882 and NFORCE2 S4985. If
somebody misses this, Jean will rewrite support using the proper
i2c mux framework.
New Hardware Support:
- Added support for:
- Intel Panther Lake (new ID)
- AMD ASF (new driver)
- S32G2/S32G3 SoCs (new ID)
- Realtek RTL I2C Controller (new driver)
- HJMC01 DesignWare ACPI HID (new ID)
- PIC64GX to Microchip Core (new ID)
- Qualcomm SDM670 to Qualcomm CCI (new ID)
- add support for the lockable page on ST M24256E
-----BEGIN PGP SIGNATURE-----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=+6hV
-----END PGP SIGNATURE-----
Merge tag 'at24-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-mergewindow
at24 updates for v6.13-rc1
- add support for the lockable page on ST M24256E
* Split the Amlogic reset-meson driver into platform and auxiliary
bus drivers. Add support for the reset controller in the G12 and
SM1 audio clock controllers.
* Replace the list of boolean parameters to the internal
reset_control_get functions with an enum reset_flags bitfield,
to make the code more self-descriptive.
* Add devres helpers to request pre-deasserted (and automatically
re-asserting during cleanup) reset controls. This allows reducing
boilerplate in drivers that deassert resets for the lifetime of a
device.
* Use the new auto-deasserting devres helpers in reset-uniphier-glue
as an example.
* Add support for the LAN966x PCI device in drivers/misc, as a
dependency for the following reset-microchip-sparx5 patches.
* Add support for being used on the LAN966x PCI device to the
reset-microchip-sparx5 driver.
Commit 86f134941a ("MAINTAINERS: Add the Microchip LAN966x PCI driver
entry") introduces a trivial merge conflict with commit 7280f01e79
("net: lan969x: add match data for lan969x") from the net-next tree [1].
[1] https://lore.kernel.org/all/20241101122505.3eacd183@canb.auug.org.au/
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCZyn4gxcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwFJZAP0fjXG07qnGp1Sgai/pmCesg5xJ
PAEL5/hKaYwQsAQHhwEAwaJg+kVeb74ez3ae4akyvngasJJT9LLDmqWEdxPIcw0=
=cyUW
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=rxJh
-----END PGP SIGNATURE-----
Merge tag 'reset-for-v6.13' of git://git.pengutronix.de/pza/linux into soc/drivers
Reset controller updates for v6.13
* Split the Amlogic reset-meson driver into platform and auxiliary
bus drivers. Add support for the reset controller in the G12 and
SM1 audio clock controllers.
* Replace the list of boolean parameters to the internal
reset_control_get functions with an enum reset_flags bitfield,
to make the code more self-descriptive.
* Add devres helpers to request pre-deasserted (and automatically
re-asserting during cleanup) reset controls. This allows reducing
boilerplate in drivers that deassert resets for the lifetime of a
device.
* Use the new auto-deasserting devres helpers in reset-uniphier-glue
as an example.
* Add support for the LAN966x PCI device in drivers/misc, as a
dependency for the following reset-microchip-sparx5 patches.
* Add support for being used on the LAN966x PCI device to the
reset-microchip-sparx5 driver.
Commit 86f134941a ("MAINTAINERS: Add the Microchip LAN966x PCI driver
entry") introduces a trivial merge conflict with commit 7280f01e79
("net: lan969x: add match data for lan969x") from the net-next tree [1].
[1] https://lore.kernel.org/all/20241101122505.3eacd183@canb.auug.org.au/
* tag 'reset-for-v6.13' of git://git.pengutronix.de/pza/linux: (21 commits)
misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'
misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'
reset: mchp: sparx5: set the dev member of the reset controller
reset: mchp: sparx5: Allow building as a module
reset: mchp: sparx5: Add MCHP_LAN966X_PCI dependency
reset: mchp: sparx5: Map cpu-syscon locally in case of LAN966x
MAINTAINERS: Add the Microchip LAN966x PCI driver entry
misc: Add support for LAN966x PCI device
reset: uniphier-glue: Use devm_reset_control_bulk_get_shared_deasserted()
reset: Add devres helpers to request pre-deasserted reset controls
reset: replace boolean parameters with flags parameter
reset: amlogic: Fix small whitespace issue
reset: amlogic: add auxiliary reset driver support
reset: amlogic: split the device core and platform probe
reset: amlogic: move drivers to a dedicated directory
reset: amlogic: add reset status support
reset: amlogic: use reset number instead of register count
reset: amlogic: add driver parameters
reset: amlogic: make parameters unsigned
reset: amlogic: use generic data matching function
...
Link: https://lore.kernel.org/r/20241105105229.3729474-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
vsc_identify_silicon() returns -EINVAL in various places without logging
what is going on.
And there are several bug reports about mei_vsc_hw_reset() failing with
-EINVAL before the "silicon stepping version is %u:%u" message get logged,
indicating this is coming from vsc_identify_silicon():
[ 10.949657] intel_vsc intel_vsc: hw_reset failed ret = -22
[ 10.988899] intel_vsc intel_vsc: hw_reset failed ret = -22
[ 11.027140] intel_vsc intel_vsc: hw_reset failed ret = -22
[ 11.027151] intel_vsc intel_vsc: reset: reached maximal consecutive resets: disabling the device
[ 11.027155] intel_vsc intel_vsc: reset failed ret = -19
[ 11.027157] intel_vsc intel_vsc: link layer initialization failed.
[ 11.027159] intel_vsc intel_vsc: error -ENODEV: init hw failed
Add proper error logging to mei_vsc_hw_reset() so that it will be clear
why it is failing when it fails.
Link: https://github.com/intel/ivsc-driver/issues/51
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241108151234.36884-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The only 2 callers of vsc_tp_reset() are:
1. mei_vsc_hw_reset(), which immediataly calls vsc_tp_intr_disable()
afterwards.
2. vsc_tp_shutdown() which immediately calls free_irq() afterwards.
So neither actually wants the interrupt to be enabled after resetting
the chip and having the interrupt enabled for a short time afer
the reset is undesirable.
Drop the enable_irq() call from vsc_tp_reset(), so that the interrupt
is left disabled after vsc_tp_reset().
Link: https://github.com/intel/ivsc-driver/issues/51
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241106220102.40549-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Hari Prasath Gujulan Elango <hari.prasathge@microchip.com>
Link: https://lore.kernel.org/r/20241104190700.275573-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only propose KEBA CP500 drivers on architectures where the device
exists, unless build-testing.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20241104142217.1dad57cf@endymion.delvare
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mmap() callbacks should not modify the struct
bin_attribute passed as argument.
Enforce this by marking the argument as const.
As there are not many callback implementers perform this change
throughout the tree at once.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com> # ocxl
Acked-by: Krzysztof Wilczyński <kw@linux.com>
Link: https://lore.kernel.org/r/20241103-sysfs-const-bin_attr-v2-6-71110628844c@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rtsx_pci_ms memstick driver has been dropped, thus there is no more
need for DRV_NAME_RTSX_PCI_MS variable. Additionally, this also stand-
arizes DRV_NAME variables on alcor_pci and rtsx_usb drivers.
Fixes: d0f459259c ("memstick: rtsx_pci_ms: Remove Realtek PCI memstick driver")
Signed-off-by: Desnes Nunes <desnesn@redhat.com>
Link: https://lore.kernel.org/r/20241031142801.1141680-1-desnesn@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dtc generates the following warning when building the LAN966x devicetree
overlay (lan966x_pci.dtso):
Warning (interrupts_property): /fragment@0/__overlay__/pci-ep-bus@0/oic@e00c0120: Missing interrupt-parent
The oic interrupt parent is the PCI device itself. The PCI device node
is the node on which the dtbo will be applied and this node already has
properties needed.
In order to remove the warning, add the missing properties in the
overlay fragment node. Properties in this node will not be added when
the overlay is applied (which is what we expect) but makes dtc happy.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20241025110919.64b1cffb@canb.auug.org.au/
Fixes: 185686beb4 ("misc: Add support for LAN966x PCI device")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241029084338.194942-3-herve.codina@bootlin.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
dtc generates the following warnings when building the LAN966x device
tree overlay (lan966x_pci.dtso):
Warning (simple_bus_reg): /fragment@0/__overlay__/pci-ep-bus@0/cpu_clk: missing or empty reg/ranges property
Warning (simple_bus_reg): /fragment@0/__overlay__/pci-ep-bus@0/ddr_clk: missing or empty reg/ranges property
Warning (simple_bus_reg): /fragment@0/__overlay__/pci-ep-bus@0/sys_clk: missing or empty reg/ranges property
Indeed, related nodes are under the pci-ep-bus (simple-bus) which is not
correct.
Put them outside this node.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20241025110919.64b1cffb@canb.auug.org.au/
Fixes: 185686beb4 ("misc: Add support for LAN966x PCI device")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241029084338.194942-2-herve.codina@bootlin.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Read buffer is allocated according to max message size, reported by
the firmware and may reach 64K in systems with pxp client.
Contiguous 64k allocation may fail under memory pressure.
Read buffer is used as in-driver message storage and not required
to be contiguous.
Use kvmalloc to allow kernel to allocate non-contiguous memory.
Fixes: 3030dc0564 ("mei: add wrapper for queuing control commands.")
Cc: stable <stable@kernel.org>
Reported-by: Rohit Agarwal <rohiagar@chromium.org>
Closes: https://lore.kernel.org/all/20240813084542.2921300-1-rohiagar@chromium.org/
Tested-by: Brian Geffon <bgeffon@google.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Acked-by: Tomas Winkler <tomasw@gmail.com>
Link: https://lore.kernel.org/r/20241015123157.2337026-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a PCI driver that handles the LAN966x PCI device using a device-tree
overlay. This overlay is applied to the PCI device DT node and allows to
describe components that are present in the device.
The memory from the device-tree is remapped to the BAR memory thanks to
"ranges" properties computed at runtime by the PCI core during the PCI
enumeration.
The PCI device itself acts as an interrupt controller and is used as the
parent of the internal LAN966x interrupt controller to route the
interrupts to the assigned PCI INTx interrupt.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # quirks.c
Link: https://lore.kernel.org/r/20241014124636.24221-2-herve.codina@bootlin.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The ST M24256E behaves as a regular M24C256, except for the E variant
which uses up another I2C address for Additional Write lockable page.
This page is 64 Bytes long and can contain additional data. Add entry
for it, so users can describe that page in DT. Note that users still
have to describe the main M24C256 area separately as that is on separate
I2C address from this page.
Unlike M24C32-D and M24C64-D, this part is specifically ST and does not
have any comparable M24* counterparts from other vendors, hence the st,
vendor prefix. Furthermore, the part name is M24256E without C between
the 24 and 256, this is not a typo. Finally, there is M24C256-D part,
which does contain 32 Bytes long Additional Write lockable page, which
is a different part and not supported by this patch.
Datasheet: https://www.st.com/resource/en/datasheet/m24256e-f.pdf
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20241017184152.128395-2-marex@denx.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Here are a number of small char/misc/iio driver fixes for 6.12-rc4.
Included in here are the following:
- loads of small iio driver fixes for reported problems
- parport driver out-of-bounds fix
- Kconfig description and MAINTAINERS file updates
All of these, except for the Kconfig and MAINTAINERS file updates have
been in linux-next all week. Those other two are just documentation
changes and will have no runtime issues and were merged on Friday.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZxUGYg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynTCQCggBy+iX/11utliIaNKD2PHkB5BjQAn1igXYZI
hgWphEoTvBtVgGfOzNwt
=0mak
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc driver fixes from Greg KH:
"Here are a number of small char/misc/iio driver fixes for 6.12-rc4:
- loads of small iio driver fixes for reported problems
- parport driver out-of-bounds fix
- Kconfig description and MAINTAINERS file updates
All of these, except for the Kconfig and MAINTAINERS file updates have
been in linux-next all week. Those other two are just documentation
changes and will have no runtime issues and were merged on Friday"
* tag 'char-misc-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (39 commits)
misc: rtsx: list supported models in Kconfig help
MAINTAINERS: Remove some entries due to various compliance requirements.
misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for OTP device
misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for EEPROM device
parport: Proper fix for array out-of-bounds access
iio: frequency: admv4420: fix missing select REMAP_SPI in Kconfig
iio: frequency: {admv4420,adrf6780}: format Kconfig entries
iio: adc: ad4695: Add missing Kconfig select
iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency()
iioc: dac: ltc2664: Fix span variable usage in ltc2664_channel_config()
iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig
iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig
iio: dac: ad5770r: add missing select REGMAP_SPI in Kconfig
iio: amplifiers: ada4250: add missing select REGMAP_SPI in Kconfig
iio: frequency: adf4377: add missing select REMAP_SPI in Kconfig
iio: resolver: ad2s1210: add missing select (TRIGGERED_)BUFFER in Kconfig
iio: resolver: ad2s1210 add missing select REGMAP in Kconfig
iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
iio: pressure: bm1390: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig
...
This driver has only ever been used by the omap4-panda board file. This
file has been gone for over 10 years. Let it go.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241016094117.16654-1-brgl@bgdev.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rts5228, rts5261, rts5264 are supported by the rtsx_pci driver, but
they are not mentioned in the Kconfig help when the code was added.
List those models in the Kconfig help accordingly.
Signed-off-by: Yo-Jung Lin (Leo) <0xff07@gmail.com>
Link: https://lore.kernel.org/r/20241017144747.15966-1-0xff07@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
By using NVMEM_DEVID_AUTO we support more than 1 device and
automatically enumerate.
Fixes: 0969001569 ("misc: microchip: pci1xxxx: Add support to read and write into PCI1XXXX OTP via NVMEM sysfs")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20241007071120.9522-2-heiko.thiery@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
By using NVMEM_DEVID_AUTO we support more than 1 device and
automatically enumerate.
Fixes: 9ab5465349 ("misc: microchip: pci1xxxx: Add support to read and write into PCI1XXXX EEPROM via NVMEM sysfs")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20241007071120.9522-1-heiko.thiery@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for the UART auxiliary devices. This enables access to up to
3 different UARTs, which are implemented in the FPGA.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20241011191257.19702-9-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The main EEPROM of KEBA CP500 devices is divided into two sections. One
section for type label data like device name, order number, serial
number and so on. The second section is reserved for arbitrary data
stored by the user.
The two sections have a defined range. The first 3 kB for the type label
and the remaining 1 kB for user data. The type label is written during
production and can fill up the whole 3 kB. Thus, the range is fixed and
cannot be changed dynamically.
The two sections cannot be presented as NVMEM cells. A NVMEM cell is
always read and written at once, because the data presented to the user
can differ from the data stored in the physical NVMEM cell. Thus, NVMEM
cells would lead to reading 3 kB for every type label access, even if
only the device name is read. So performance would suffer. But it is
also an indication that NVMEM cells are designed for small data cells
within NVMEM devices.
Register separate NVMEM devices for every section. This enables safe
access to every section. Also different access rights are then possible.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20241011191257.19702-6-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KEBA CP500 devices use the LAN9252 controller for EtherCAT
communication. For a stable Ethernet link the PHY registers of the
controller need to be configured correctly. This driver configures these
PHY registers as required.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20241011191257.19702-5-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for the SPI controller auxiliary device. This enables access
to the SPI flash of the FPGA and some other SPI devices.
The actual list of SPI devices is detected by reading some bits out of
the previously registered I2C EEPROM.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20241011191257.19702-4-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
One function of the cp500 driver uses the variable name retval for
return values but all others use the variable name ret. Use ret for
return values in all functions.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20241011191257.19702-2-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pm_runtime_disable() is missing in probe error path,
so add it to fix it.
Fixes: 92b1f84d46 ("drivers/misc: driver for APDS990X ALS and proximity sensors")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20240923035556.3009105-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reorganize kerneldoc parameter names to match the parameter
order in the function header.
Problems identified using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20240930112121.95324-14-Julia.Lawall@inria.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a quirk similar to eeprom_93xx46 to add an extra clock cycle before
reading data from the EEPROM.
The 93Cx6 family of EEPROMs output a "dummy 0 bit" between the writing
of the op-code/address from the host to the EEPROM and the reading of
the actual data from the EEPROM.
More info can be found on page 6 of the AT93C46 datasheet (linked below).
Similar notes are found in other 93xx6 datasheets.
In summary the read operation for a 93Cx6 EEPROM is:
Write to EEPROM: 110[A5-A0] (9 bits)
Read from EEPROM: 0[D15-D0] (17 bits)
Where:
110 is the start bit and READ OpCode
[A5-A0] is the address to read from
0 is a "dummy bit" preceding the actual data
[D15-D0] is the actual data.
Looking at the READ timing diagrams in the 93Cx6 datasheets the dummy
bit should be clocked out on the last address bit clock cycle meaning it
should be discarded naturally.
However, depending on the hardware configuration sometimes this dummy
bit is not discarded. This is the case with Exar PCI UARTs which require
an extra clock cycle between sending the address and reading the data.
Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-5193-SEEPROM-AT93C46D-Datasheet.pdf
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Parker Newman <pnewman@connecttech.com>
Link: https://lore.kernel.org/r/0f23973efefccd2544705a0480b4ad4c2353e407.1727880931.git.pnewman@connecttech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Disabling preemption in the GRU driver is unnecessary, and clashes with
sleeping locks in several code paths. Remove preempt_disable and
preempt_enable from the GRU driver.
Signed-off-by: Dimitri Sivanich <sivanich@hpe.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1. Sorry for the delay, conference travel for the past two
weeks has this and my other pull requests showing up real late
in the cycle.
Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem updates
all over the place. Included in here are:
- lots and lots of new IIO drivers and updates to existing ones
- interconnect subsystem updates and new drivers
- nvmem subsystem updates and new drivers
- mhi driver updates
- power supply subsystem updates
- kobj_type const work for many different small subsystems
- comedi driver fix
- coresight subsystem and driver updates
- fpga subsystem improvements
- slimbus fixups
- binder new feature addition for "frozen" notifications
- lots and lots of other small driver updates and cleanups
All of these have been in linux-next for a long time with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZvUxoA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykEnwCgnv9Q9tNrabLB2VXu8dRgMCee0J4AoIc5qA7/
mLXk2wxl5+dt/dfNgZIp
=x5HV
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1.
Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem
updates all over the place. Included in here are:
- lots and lots of new IIO drivers and updates to existing ones
- interconnect subsystem updates and new drivers
- nvmem subsystem updates and new drivers
- mhi driver updates
- power supply subsystem updates
- kobj_type const work for many different small subsystems
- comedi driver fix
- coresight subsystem and driver updates
- fpga subsystem improvements
- slimbus fixups
- binder new feature addition for "frozen" notifications
- lots and lots of other small driver updates and cleanups
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits)
greybus: gb-beagleplay: Add firmware upload API
arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7
dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios
MAINTAINERS: Update path for U-Boot environment variables YAML
nvmem: layouts: add U-Boot env layout
comedi: ni_routing: tools: Check when the file could not be opened
ocxl: Remove the unused declarations in headr file
hpet: Fix the wrong format specifier
uio: Constify struct kobj_type
cxl: Constify struct kobj_type
binder: modify the comment for binder_proc_unlock
iio: adc: axp20x_adc: add support for AXP717 ADC
dt-bindings: iio: adc: Add AXP717 compatible
iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0
tools: iio: rm .*.cmd when make clean
iio: adc: standardize on formatting for id match tables
iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
...
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
"mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64() to
provide (much) more accurate results. The current implementation was
causing Uwe some issues in the PWM drivers.
"xz: Updates to license, filters, and compression options" from Lasse
Collin. Miscellaneous maintenance and kinor feature work to the xz
decompressor.
"Fix some GDB command error and add some GDB commands" from Kuan-Ying Lee.
Fixes and enhancements to the gdb scripts.
"treewide: add missing MODULE_DESCRIPTION() macros" from Jeff Johnson.
Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of warnings about this.
"nilfs2: add support for some common ioctls" from Ryusuke Konishi. Adds
various commonly-available ioctls to nilfs2.
"This series fixes a number of formatting issues in kernel doc comments"
from Ryusuke Konishi does that.
"nilfs2: prevent unexpected ENOENT propagation" from Ryusuke Konishi. Fix
issues where -ENOENT was being unintentionally and inappropriately
returned to userspace.
"nilfs2: assorted cleanups" from Huang Xiaojia.
"nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2 filesystems.
"scripts/decode_stacktrace.sh: improve error reporting and usability" from
Luca Ceresoli does those things.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZu7dpAAKCRDdBJ7gKXxA
jsPqAPwMDEZyKlfSw7QioEHNHDkmkbP7VYCYR0CbUnppbztwpAD8D37aVbWQ+UzM
3nnOq3W2Pc2o/20zqi8Upf1mnvUrygQ=
=/NWE
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Many singleton patches - please see the various changelogs for
details.
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
- "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64()
to provide (much) more accurate results. The current implementation
was causing Uwe some issues in the PWM drivers.
- "xz: Updates to license, filters, and compression options" from
Lasse Collin. Miscellaneous maintenance and kinor feature work to
the xz decompressor.
- "Fix some GDB command error and add some GDB commands" from
Kuan-Ying Lee. Fixes and enhancements to the gdb scripts.
- "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff
Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of
warnings about this.
- "nilfs2: add support for some common ioctls" from Ryusuke Konishi.
Adds various commonly-available ioctls to nilfs2.
- "This series fixes a number of formatting issues in kernel doc
comments" from Ryusuke Konishi does that.
- "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke
Konishi. Fix issues where -ENOENT was being unintentionally and
inappropriately returned to userspace.
- "nilfs2: assorted cleanups" from Huang Xiaojia.
- "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2
filesystems.
- "scripts/decode_stacktrace.sh: improve error reporting and
usability" from Luca Ceresoli does those things"
* tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits)
list: test: increase coverage of list_test_list_replace*()
list: test: fix tests for list_cut_position()
proc: use __auto_type more
treewide: correct the typo 'retun'
ocfs2: cleanup return value and mlog in ocfs2_global_read_info()
nilfs2: remove duplicate 'unlikely()' usage
nilfs2: fix potential oob read in nilfs_btree_check_delete()
nilfs2: determine empty node blocks as corrupted
nilfs2: fix potential null-ptr-deref in nilfs_btree_insert()
user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation
tools/mm: rm thp_swap_allocator_test when make clean
squashfs: fix percpu address space issues in decompressor_multi_percpu.c
lib: glob.c: added null check for character class
nilfs2: refactor nilfs_segctor_thread()
nilfs2: use kthread_create and kthread_stop for the log writer thread
nilfs2: remove sc_timer_task
nilfs2: do not repair reserved inode bitmap in nilfs_new_inode()
nilfs2: eliminate the shared counter and spinlock for i_generation
nilfs2: separate inode type information from i_state field
nilfs2: use the BITS_PER_LONG macro
...
- Add documentation for the mmc-test driver
- Register the eMMC RPMB partition with the RPMB subsystem
- Some various cleanups
MMC host:
- dw_mmc-rockchip: Add support for the RK3576 variant
- renesas_sdhi: Add support for the RZ/V2H(P) variant
- sdhci_am654: Add a retry mechanism for tuning
- sdhci-atmel: Convert DT bindings to json schema
- sdhci-of-dwcmshc: Add eMMC HW reset support for BlueField-3 SoC
- sdhci-of-dwcmshc: Add support for the RK3576 variant
- sdhci-of-dwcmshc: Add support for the Sophgo SG2042 variant
- sdhci-of-ma35d1: Add new driver for the Nuvoton MA35D1 SDHCI
Misc/Tee:
- Add Replay Protected Memory Block (RPMB) subsystem
- Let optee probe RPMB device using RPMB subsystem
-----BEGIN PGP SIGNATURE-----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=en1i
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add documentation for the mmc-test driver
- Register the eMMC RPMB partition with the RPMB subsystem
- Some various cleanups
MMC host:
- dw_mmc-rockchip: Add support for the RK3576 variant
- renesas_sdhi: Add support for the RZ/V2H(P) variant
- sdhci_am654: Add a retry mechanism for tuning
- sdhci-atmel: Convert DT bindings to json schema
- sdhci-of-dwcmshc:
- Add eMMC HW reset support for BlueField-3 SoC
- Add support for the RK3576 variant
- Add support for the Sophgo SG2042 variant
- sdhci-of-ma35d1: Add new driver for the Nuvoton MA35D1 SDHCI
Misc/Tee:
- Add Replay Protected Memory Block (RPMB) subsystem
- Let optee probe RPMB device using RPMB subsystem"
* tag 'mmc-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (41 commits)
mmc: core: Use dev_err_probe for deferred regulators
optee: Fix a NULL vs IS_ERR() check
mmc: sdhci_am654: Add prints to tuning algorithm
mmc: sdhci_am654: Add retry tuning
dt-bindings: mmc: Add support for rk3576 eMMC
Documentation: mmc: Add mmc-test doc
rpmb: fix error path in rpmb_dev_register()
optee: add RPMB dependency
mmc: block: add RPMB dependency
mmc: core Convert UNSTUFF_BITS macro to inline function
dt-bindings: mmc: sdhci-atmel: Convert to json schema
mmc: core: Convert simple_stroul to kstroul
mmc: core: Calculate size from pointer
mmc: cqhci: Make use of cqhci_halted() routine
mmc: core: Replace the argument of mmc_sd_switch() with defines
mmc: dw_mmc-rockchip: Add support for rk3576 SoCs
mmc: dw_mmc-rockchip: Add internal phase support
dt-bindings: mmc: Add support for rk3576 dw-mshc
mmc: sdhci-of-dwcmshc: Add hw_reset() support for BlueField-3 SoC
mmc: core: remove left-over data structure declarations
...
The definition of ocxl_create_cdev() and ocxl_destroy_cdev() has been
removed since commit 75ca758adb ("ocxl: Create a clear delineation
between ocxl backend & frontend"). So, let's remove the empty declarations.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240907082555.60836-1-zhangzekun11@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This 'struct kobj_type' is not modified. It is only used in
kobject_init_and_add() which takes a 'const struct kobj_type *ktype'
parameter.
Constifying this structure and moving it to a read-only section,
and can increase over all security.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20240904011951.2010646-1-lihongbo22@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Until this patch was rpmb_dev_register() always freeing rdev in the error
path. However, past device_register() it must not do that since the memory
is now managed by the device even if it failed to register properly. So fix
this by doing a put_device() before returning the error code.
Fixes the smatch warning:
drivers/misc/rpmb-core.c:204 rpmb_dev_register()
warn: freeing device managed memory (leak): 'rdev'
Fixes: 1e9046e3a1 ("rpmb: add Replay Protected Memory Block (RPMB) subsystem")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Link: https://lore.kernel.org/r/20240902105803.2885544-1-jens.wiklander@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When removing a resource from vmci_resource_table in
vmci_resource_remove(), the search is performed using the resource
handle by comparing context and resource fields.
It is possible though to create two resources with different types
but same handle (same context and resource fields).
When trying to remove one of the resources, vmci_resource_remove()
may not remove the intended one, but the object will still be freed
as in the case of the datagram type in vmci_datagram_destroy_handle().
vmci_resource_table will still hold a pointer to this freed resource
leading to a use-after-free vulnerability.
BUG: KASAN: use-after-free in vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline]
BUG: KASAN: use-after-free in vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147
Read of size 4 at addr ffff88801c16d800 by task syz-executor197/1592
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x82/0xa9 lib/dump_stack.c:106
print_address_description.constprop.0+0x21/0x366 mm/kasan/report.c:239
__kasan_report.cold+0x7f/0x132 mm/kasan/report.c:425
kasan_report+0x38/0x51 mm/kasan/report.c:442
vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline]
vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147
vmci_qp_broker_detach+0x89a/0x11b9 drivers/misc/vmw_vmci/vmci_queue_pair.c:2182
ctx_free_ctx+0x473/0xbe1 drivers/misc/vmw_vmci/vmci_context.c:444
kref_put include/linux/kref.h:65 [inline]
vmci_ctx_put drivers/misc/vmw_vmci/vmci_context.c:497 [inline]
vmci_ctx_destroy+0x170/0x1d6 drivers/misc/vmw_vmci/vmci_context.c:195
vmci_host_close+0x125/0x1ac drivers/misc/vmw_vmci/vmci_host.c:143
__fput+0x261/0xa34 fs/file_table.c:282
task_work_run+0xf0/0x194 kernel/task_work.c:164
tracehook_notify_resume include/linux/tracehook.h:189 [inline]
exit_to_user_mode_loop+0x184/0x189 kernel/entry/common.c:187
exit_to_user_mode_prepare+0x11b/0x123 kernel/entry/common.c:220
__syscall_exit_to_user_mode_work kernel/entry/common.c:302 [inline]
syscall_exit_to_user_mode+0x18/0x42 kernel/entry/common.c:313
do_syscall_64+0x41/0x85 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x6e/0x0
This change ensures the type is also checked when removing
the resource from vmci_resource_table in vmci_resource_remove().
Fixes: bc63dedb7d ("VMCI: resource object implementation.")
Cc: stable@vger.kernel.org
Reported-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: David Fernandez Gonzalez <david.fernandez.gonzalez@oracle.com>
Link: https://lore.kernel.org/r/20240828154338.754746-1-david.fernandez.gonzalez@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sysfs_create_group() races with userspace. Use dev_groups instead which
prevents all the problems of sysfs_create_group().
Fixes: a194467676 ("misc: keba: Add basic KEBA CP500 system FPGA support")
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20240819192645.50171-1-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function simple_strtoul performs no error checking
in scenarios where the input value overflows the intended
output variable.
We can replace the use of the simple_strtoul with the safer
alternatives kstrtoul.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://lore.kernel.org/r/20240830080311.3545307-1-lihongbo22@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usage of of_get_property() is wrong. What's returned in "val" is
the property's length, not the value. Fix this by using the preferred
typed of_property_read_u32() function instead.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240828131851.3631855-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
smatch warning:
drivers/misc/fastrpc.c:1926 fastrpc_req_mmap() error: double free of 'buf'
In fastrpc_req_mmap() error path, the fastrpc buffer is freed in
fastrpc_req_munmap_impl() if unmap is successful.
But in the end, there is an unconditional call to fastrpc_buf_free().
So the above case triggers the double free of fastrpc buf.
Fixes: 72fa6f7820 ("misc: fastrpc: Rework fastrpc_req_munmap")
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Sukrut Bellary <sukrut.bellary@linux.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20240902141409.70371-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fastrpc supports 4 remoteproc. There are some products which
support cdsp1 remoteproc. Add changes to support cdsp1 remoteproc.
Signed-off-by: Ling Xu <quic_lxu5@quicinc.com>
[Bartosz: ported to mainline]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240902141821.70656-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fault-inject.h users across the kernel need to add a lot of #ifdef
CONFIG_FAULT_INJECTION to cater for shortcomings in the header. Make
fault-inject.h self-contained for CONFIG_FAULT_INJECTION=n, and add stubs
for DECLARE_FAULT_ATTR(), setup_fault_attr(), should_fail_ex(), and
should_fail() to allow removal of conditional compilation.
[akpm@linux-foundation.org: repair fallout from no longer including debugfs.h into fault-inject.h]
[akpm@linux-foundation.org: fix drivers/misc/xilinx_tmr_inject.c]
[akpm@linux-foundation.org: Add debugfs.h inclusion to more files, per Stephen]
Link: https://lkml.kernel.org/r/20240813121237.2382534-1-jani.nikula@intel.com
Fixes: 6ff1cb355e ("[PATCH] fault-injection capabilities infrastructure")
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A number of storage technologies support a specialised hardware
partition designed to be resistant to replay attacks. The underlying
HW protocols differ but the operations are common. The RPMB partition
cannot be accessed via standard block layer, but by a set of specific
RPMB commands. Such a partition provides authenticated and replay
protected access, hence suitable as a secure storage.
The initial aim of this patch is to provide a simple RPMB driver
interface which can be accessed by the optee driver to facilitate early
RPMB access to OP-TEE OS (secure OS) during the boot time.
A TEE device driver can claim the RPMB interface, for example, via
rpmb_interface_register() or rpmb_dev_find_device(). The RPMB driver
provides a callback to route RPMB frames to the RPMB device accessible
via rpmb_route_frames().
The detailed operation of implementing the access is left to the TEE
device driver itself.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Shyam Saini <shyamsaini@linux.microsoft.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Manuel Traut <manut@mecka.net>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240814153558.708365-2-jens.wiklander@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Here are some small char/misc fixes for 6.11-rc4 to resolve reported
problems. Included in here are:
- fastrpc revert of a change that broke userspace
- xillybus fixes for reported issues
Half of these have been in linux-next this week with no reported
problems, I don't know if the last bit of xillybus driver changes made
it in, but they are "obviously correct" so will be safe :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZsIT4A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymYQACfeV6tIMHlHSVS9VSbiXHJAovjvFEAoLQvuvBS
0dN1Q4iYF+5Sy4JWAZb/
=ztLK
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc fixes from Greg KH:
"Here are some small char/misc fixes for 6.11-rc4 to resolve reported
problems. Included in here are:
- fastrpc revert of a change that broke userspace
- xillybus fixes for reported issues
Half of these have been in linux-next this week with no reported
problems, I don't know if the last bit of xillybus driver changes made
it in, but they are 'obviously correct' so will be safe :)"
* tag 'char-misc-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
char: xillybus: Check USB endpoints when probing device
char: xillybus: Refine workqueue handling
Revert "misc: fastrpc: Restrict untrusted app to attach to privileged PD"
char: xillybus: Don't destroy workqueue from work item running on it
The test for access watchpoints (hw_access_break_test) was broken
(always failed) because the compiler optimized out the write to the
static helper variable (hw_break_val2), as it is never read anywhere.
This resulted in the target variable (hw_break_val) not being accessed
and thus the breakpoint not being triggered.
Remove the helper variable (hw_break_val2), and use READ_ONCE to force
reading the target variable (hw_break_val).
Signed-off-by: Florian Rommel <mail@florommel.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240812085459.291741-1-mail@florommel.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a reference counter is at zero and refcount_sub_and_test() is invoked
to subtract zero, the function accepts this request without any warning and
returns true. This behavior does not seem ideal because the counter being
already at zero indicates a use-after-free. Furthermore, returning true by
refcount_sub_and_test() in this case potentially results in a double-free
done by its caller.
Modify the underlying function __refcount_sub_and_test() to warn about this
case as a use-after-free and have it return false to avoid the potential
double-free.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240717130023.5675-1-petr.pavlu@suse.com
Signed-off-by: Kees Cook <kees@kernel.org>
The CXL driver has its own custom implementations of typed DT property
accessors. Replace the custom property accessor functions with the
common DT property functions.
This clean-up is part of a larger effort to remove of_get_property() and
other DT functions which leak pointers to DT node and property data.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240729-dt-cxl-cleanup-v1-2-a75eea80d231@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's little reason to dump DT property values when they can be read
at any time from the DT in /proc/device-tree. If such a feature is
needed, then it really should be implemented in the DT core such that
any module/driver can use it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240729-dt-cxl-cleanup-v1-1-a75eea80d231@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I found one more missing dependency in the new driver: when building
without CONFIG_PCI_IOV, pci_sriov_configure_simple() cannot be
called directly:
drivers/misc/mrvl_cn10k_dpi.c: In function 'dpi_remove':
include/linux/stddef.h:9:14: error: called object is not a function or function pointer
9 | #define NULL ((void *)0)
| ^
include/linux/pci.h:2416:41: note: in expansion of macro 'NULL'
2416 | #define pci_sriov_configure_simple NULL
| ^~~~
drivers/misc/mrvl_cn10k_dpi.c:652:9: note: in expansion of macro 'pci_sriov_configure_simple'
652 | pci_sriov_configure_simple(pdev, 0);
Add this to the Kconfig file as well.
Fixes: 5f67eef6df ("misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Vamsi Attunuru <vattunuru@marvell.com>
Link: https://lore.kernel.org/r/20240719103858.1292094-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the devres-based management of ee1004_bus_data has
several issues when it comes to locking:
1. It does not call mutex_unlock() before returning an error.
2. When encountering an error, it deadlocks when trying to recursively
lock a mutex.
Fix this by moving the mutex-protected bus data initialization into
a separate function so that devm_add_action_or_reset() is called
without the mutex being held.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 55d57ef6fa ("eeprom: ee1004: Use devres for bus data cleanup")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240713234813.21746-1-W_Armin@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases to
get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions. It's not all that useful for a "write a whole driver
in rust" type of thing, but the firmware bindings do help out the
phy rust drivers, and the driver core bindings give a solid base on
which others can start their work. There is still a long way to go
here before we have a multitude of rust drivers being added, but
it's a great first step.
- driver core const api changes. This reached across all bus types,
and there are some fix-ups for some not-common bus types that
linux-next and 0-day testing shook out. This work is being done to
help make the rust bindings more safe, as well as the C code, moving
toward the end-goal of allowing us to put driver structures into
read-only memory. We aren't there yet, but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZqH+aQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoOQCfVBdLcBjEDAGh3L8qHRGMPy4rV2EAoL/r+zKm
cJEYtJpGtWX6aAtugm9E
=ZyJV
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
-----BEGIN PGP SIGNATURE-----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=vw2i
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Define PCIE_RESET_CONFIG_DEVICE_WAIT_MS for the generic 100ms
required after reset before config access (Kevin Xie)
- Define PCIE_T_RRS_READY_MS for the generic 100ms required after
reset before config access (probably should be unified with
PCIE_RESET_CONFIG_DEVICE_WAIT_MS) (Damien Le Moal)
Resource management:
- Rename find_resource() to find_resource_space() to be more
descriptive (Ilpo Järvinen)
- Export find_resource_space() for use by PCI core, which needs to
learn whether there is available space for a bridge window (Ilpo
Järvinen)
- Prevent double counting of resources so window size doesn't grow on
each remove/rescan cycle (Ilpo Järvinen)
- Relax bridge window sizing algorithm so a device doesn't break
simply because it was removed and rescanned (Ilpo Järvinen)
- Evaluate the ACPI PRESERVE_BOOT_CONFIG _DSM in
pci_register_host_bridge() (not acpi_pci_root_create()) so we can
unify it with similar DT functionality (Vidya Sagar)
- Extend use of DT "linux,pci-probe-only" property so it works
per-host bridge as well as globally (Vidya Sagar)
- Unify support for ACPI PRESERVE_BOOT_CONFIG _DSM and the DT
"linux,pci-probe-only" property in pci_preserve_config() (Vidya
Sagar)
Driver binding:
- Add devres infrastructure for managed request and map of partial
BAR resources (Philipp Stanner)
- Deprecate pcim_iomap_table() because uses like
"pcim_iomap_table()[0]" have no good way to return errors (Philipp
Stanner)
- Add an always-managed pcim_request_region() for use instead of
pci_request_region() and similar, which are sometimes managed
depending on whether pcim_enable_device() has been called
previously (Philipp Stanner)
- Reimplement pcim_set_mwi() so it doesn't need to keep store MWI
state (Philipp Stanner)
- Add pcim_intx() for use instead of pci_intx(), which is sometimes
managed depending on whether pcim_enable_device() has been called
previously (Philipp Stanner)
- Add managed pcim_iomap_range() to allow mapping of a partial BAR
(Philipp Stanner)
- Fix a devres mapping leak in drm/vboxvideo (Philipp Stanner)
Error handling:
- Add missing bridge locking in device reset path and add a warning
for other possible lock issues (Dan Williams)
- Fix use-after-free on concurrent DPC and hot-removal (Lukas Wunner)
Power management:
- Disable AER and DPC during suspend to avoid spurious wakeups if
they share an interrupt with PME (Kai-Heng Feng)
PCIe native device hotplug:
- Detect if a device was removed or replaced during system sleep so
we don't assume a new device is the one that used to be there
(Lukas Wunner)
Virtualization:
- Add an ACS quirk for Broadcom BCM5760X multi-function NIC; it
prevents transactions between functions even though it doesn't
advertise ACS, so the functions can be attached individually via
VFIO (Ajit Khaparde)
Peer-to-peer DMA:
- Add a "pci=config_acs=" kernel command-line parameter to relax
default ACS settings to enable additional peer-to-peer
configurations. Requires expert knowledge of topology and ACS
operation (Vidya Sagar)
Endpoint framework:
- Remove unused struct pci_epf_group.type_group (Christophe JAILLET)
- Fix error handling in vpci_scan_bus() and epf_ntb_epc_cleanup()
(Dan Carpenter)
- Make struct pci_epc_class constant (Greg Kroah-Hartman)
- Remove unused pci_endpoint_test_bar_{readl,writel} functions
(Jiapeng Chong)
- Rename "BME" to "Bus Master Enable" (Manivannan Sadhasivam)
- Rename struct pci_epc_event_ops.core_init() callback to epc_init()
(Manivannan Sadhasivam)
- Move DMA init to MHI .epc_init() callback for uniformity
(Manivannan Sadhasivam)
- Cancel EPF test delayed work when link goes down (Manivannan
Sadhasivam)
- Add struct pci_epc_event_ops.epc_deinit() callback for cleanup
needed on fundamental reset (Manivannan Sadhasivam)
- Add 64KB alignment to endpoint test to support Rockchip rk3588
(Niklas Cassel)
- Optimize endpoint test by using memcpy() instead of readl() (Niklas
Cassel)
Device tree bindings:
- Add generic "ats-supported" property to advertise that a PCIe Root
Complex supports ATS (Jean-Philippe Brucker)
Amazon Annapurna Labs PCIe controller driver:
- Validate IORESOURCE_BUS presence to avoid NULL pointer dereference
(Aleksandr Mishin)
Axis ARTPEC-6 PCIe controller driver:
- Rename .cpu_addr_fixup() parameter to reflect that it is a PCI
address, not a CPU address (Niklas Cassel)
Freescale i.MX6 PCIe controller driver:
- Convert to agnostic GPIO API (Andy Shevchenko)
Freescale Layerscape PCIe controller driver:
- Make struct mobiveil_rp_ops constant (Christophe JAILLET)
- Use new generic dw_pcie_ep_linkdown() to handle link-down events
(Manivannan Sadhasivam)
HiSilicon Kirin PCIe controller driver:
- Convert to agnostic GPIO API (Andy Shevchenko)
- Use _scoped() iterator for OF children to ensure refcounts are
decremented at loop exit (Javier Carrasco)
Intel VMD host bridge driver:
- Create sysfs "domain" symlink before downstream devices are exposed
to userspace by pci_bus_add_devices() (Jiwei Sun)
Loongson PCIe controller driver:
- Enable MSI when LS7A is used with new CPUs that have integrated
PCIe Root Complex, e.g., Loongson-3C6000, so downstream devices can
use MSI (Huacai Chen)
Microchip AXI PolarFlare PCIe controller driver:
- Move pcie-microchip-host.c to a new PLDA directory (Minda Chen)
- Factor PLDA generic items out to a common
plda,xpressrich3-axi-common.yaml binding (Minda Chen)
- Factor PLDA generic data structures and code out to shared
pcie-plda.h, pcie-plda-host.c (Minda Chen)
- Add PLDA generic interrupt handling with a .request_event_irq()
callback for vendor-specific events (Minda Chen)
- Add PLDA generic host init/deinit and map bus functions for use by
vendor-specific drivers (Minda Chen)
- Rework to use PLDA core (Minda Chen)
Microsoft Hyper-V host bridge driver:
- Return zero, not garbage, when reading PCI_INTERRUPT_PIN (Wei Liu)
NVIDIA Tegra194 PCIe controller driver:
- Remove unused struct tegra_pcie_soc (Dr. David Alan Gilbert)
- Set 64KB inbound ATU alignment restriction (Jon Hunter)
Qualcomm PCIe controller driver:
- Make the MHI reg region mandatory for X1E80100, since all PCIe
controllers have it (Abel Vesa)
- Prevent use of uninitialized data and possible error pointer
dereference (Dan Carpenter)
- Return error, not success, if dev_pm_opp_find_freq_floor() fails
(Dan Carpenter)
- Add Operating Performance Points (OPP) support to scale performance
state based on aggregate link bandwidth to improve SoC power
efficiency (Krishna chaitanya chundru)
- Vote for the CPU-PCIe ICC (interconnect) path to ensure it stays
active even if other drivers don't vote for it (Krishna chaitanya
chundru)
- Use devm_clk_bulk_get_all() to get all the clocks from DT to avoid
writing out all the clock names (Manivannan Sadhasivam)
- Add DT binding and driver support for the SA8775P SoC (Mrinmay
Sarkar)
- Add HDMA support for the SA8775P SoC (Mrinmay Sarkar)
- Override the SA8775P NO_SNOOP default to avoid possible memory
corruption (Mrinmay Sarkar)
- Make sure resources are disabled during PERST# assertion, even if
the link is already disabled (Manivannan Sadhasivam)
- Use new generic dw_pcie_ep_linkdown() to handle link-down events
(Manivannan Sadhasivam)
- Add DT and endpoint driver support for the SA8775P SoC (Mrinmay
Sarkar)
- Add Hyper DMA (HDMA) support for the SA8775P SoC and enable it in
the EPF MHI driver (Mrinmay Sarkar)
- Set PCIE_PARF_NO_SNOOP_OVERIDE to override the default NO_SNOOP
attribute on the SA8775P SoC (both Root Complex and Endpoint mode)
to avoid possible memory corruption (Mrinmay Sarkar)
Renesas R-Car PCIe controller driver:
- Demote WARN() to dev_warn_ratelimited() in rcar_pcie_wakeup() to
avoid unnecessary backtrace (Marek Vasut)
- Add DT and driver support for R-Car V4H (R8A779G0) host and
endpoint. This requires separate proprietary firmware (Yoshihiro
Shimoda)
Rockchip PCIe controller driver:
- Assert PERST# for 100ms after power is stable (Damien Le Moal)
- Wait PCIE_T_RRS_READY_MS (100ms) after reset before starting
configuration (Damien Le Moal)
- Use GPIOD_OUT_LOW flag while requesting ep_gpio to fix a firmware
crash on Qcom-based modems with Rockpro64 board (Manivannan
Sadhasivam)
Rockchip DesignWare PCIe controller driver:
- Factor common parts of rockchip-dw-pcie DT binding to be shared by
Root Complex and Endpoint mode (Niklas Cassel)
- Add missing INTx signals to common DT binding (Niklas Cassel)
- Add eDMA items to DT binding for Endpoint controller (Niklas
Cassel)
- Fix initial dw-rockchip PERST# GPIO value to prevent unnecessary
short assert/deassert that causes issues with some WLAN controllers
(Niklas Cassel)
- Refactor dw-rockchip and add support for Endpoint mode (Niklas
Cassel)
- Call pci_epc_init_notify() and drop dw_pcie_ep_init_notify()
wrapper (Niklas Cassel)
- Add error messages in .probe() error paths to improve user
experience (Uwe Kleine-König)
Samsung Exynos PCIe controller driver:
- Use bulk clock APIs to simplify clock setup (Shradha Todi)
StarFive PCIe controller driver:
- Add DT binding and driver support for the StarFive JH7110
PLDA-based PCIe controller (Minda Chen)
Synopsys DesignWare PCIe controller driver:
- Add generic support for sending PME_Turn_Off when system suspends
(Frank Li)
- Fix incorrect interpretation of iATU slot 0 after PERST#
assert/deassert (Frank Li)
- Use msleep() instead of usleep_range() while waiting for link
(Konrad Dybcio)
- Refactor dw_pcie_edma_find_chip() to enable adding support for
Hyper DMA (HDMA) (Manivannan Sadhasivam)
- Enable drivers to supply the eDMA channel count since some can't
auto detect this (Manivannan Sadhasivam)
- Call pci_epc_init_notify() and drop dw_pcie_ep_init_notify()
wrapper (Manivannan Sadhasivam)
- Pass the eDMA mapping format directly from drivers instead of
maintaining a capability for it (Manivannan Sadhasivam)
- Add generic dw_pcie_ep_linkdown() to notify EPF drivers about
link-down events and restore non-sticky DWC registers lost on link
down (Manivannan Sadhasivam)
- Add vendor-specific "apb" reg name, interrupt names, INTx names to
generic binding (Niklas Cassel)
- Enforce DWC restriction that 64-bit BARs must start with an
even-numbered BAR (Niklas Cassel)
- Consolidate args of dw_pcie_prog_outbound_atu() into a structure
(Yoshihiro Shimoda)
- Add support for endpoints to send Message TLPs, e.g., for INTx
emulation (Yoshihiro Shimoda)
TI DRA7xx PCIe controller driver:
- Rename .cpu_addr_fixup() parameter to reflect that it is a PCI
address, not a CPU address (Niklas Cassel)
TI Keystone PCIe controller driver:
- Validate IORESOURCE_BUS presence to avoid NULL pointer dereference
(Aleksandr Mishin)
- Work around AM65x/DRA80xM Errata #i2037 that corrupts TLPs and
causes processor hangs by limiting Max_Read_Request_Size (MRRS) and
Max_Payload_Size (MPS) (Kishon Vijay Abraham I)
- Leave BAR 0 disabled for AM654x to fix a regression caused by
6ab15b5e70 ("PCI: dwc: keystone: Convert .scan_bus() callback to
use add_bus"), which caused a 45-second boot delay (Siddharth
Vadapalli)
Xilinx Versal CPM PCIe controller driver:
- Fix overlapping bridge registers and 32-bit BAR addresses in DT
binding (Thippeswamy Havalige)
MicroSemi Switchtec management driver:
- Make struct switchtec_class constant (Greg Kroah-Hartman)
Miscellaneous:
- Remove unused struct acpi_handle_node (Dr. David Alan Gilbert)
- Add missing MODULE_DESCRIPTION() macros (Jeff Johnson)"
* tag 'pci-v6.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (154 commits)
PCI: loongson: Enable MSI in LS7A Root Complex
PCI: Extend ACS configurability
PCI: Add missing bridge lock to pci_bus_lock()
drm/vboxvideo: fix mapping leaks
PCI: Add managed pcim_iomap_range()
PCI: Remove legacy pcim_release()
PCI: Add managed pcim_intx()
PCI: vmd: Create domain symlink before pci_bus_add_devices()
PCI: qcom: Prevent use of uninitialized data in qcom_pcie_suspend_noirq()
PCI: qcom: Prevent potential error pointer dereference
PCI: qcom: Fix missing error code in qcom_pcie_probe()
PCI: Give pcim_set_mwi() its own devres cleanup callback
PCI: Move struct pci_devres.pinned bit to struct pci_dev
PCI: Remove struct pci_devres.enabled status bit
PCI: Document hybrid devres hazards
PCI: Add managed pcim_request_region()
PCI: Deprecate pcim_iomap_table(), pcim_iomap_regions_request_all()
PCI: Add managed partial-BAR request and map infrastructure
PCI: Add devres helpers for iomap table
PCI: Add and use devres helper for bit masks
...
regarding unneeded 'driver_data' and more sanity checks in the char
device.
For the host drivers, this release includes significant updates, with
the primary change being the renaming from "master/slave" to
"controller/target" to adhere to I2C v7 and SMBus 3.2 standards.
New Support:
- Added support for Intel Arrow Lake-H.
- Added I2C support in the Arioha SoC by linking the Mediatek
I2C controller.
Cleanups:
- Added the MODULE_DESCRIPTION() macro, resolving a modpost
warning in the ALi 1563 Southbridge driver.
- Constified the regmap_config declaration in the i2c-designware
driver.
- Improved the coding style in the Renesas R-Car driver by
removing unnecessary semicolons after brackets.
General improvements:
- In the OMAP device, replaced NOIRQ_SYSTEM_SLEEP_PM_OPS with
RUNTIME_PM_OPS to enable waking up the controller during
suspend() before suspend_noirq() kicks in.
- Improved logging in the Xilinx driver.
- Added a warning (WARN()) in the Renesas R-Car driver for
spurious interrupts.
DTS Changes:
- Removed address-cell and size-cell from the Atmel at91sam,
nVidia Tegra 20, and Samsung S3c2410 devices.
- Fixed Texas Instruments OMAP4 I2C controller to comply with
the i2c-controller.yaml schema.
- Improved indentation in DTS examples for several I2C devices.
- Converted the NXP LPC1788 binding to the dt-schema.
- Added documentation for the compatible string
thead,th1520-i2c.
- Added the "power-domains" property for the Meson I2C driver.
AT24 EEPROM driver changes:
- add support for two new Microchip models
- document even more new models in DT bindings (those use fallback
compatibles so no code changes)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmaagXUACgkQFA3kzBSg
KbYbXg/+Kox1Qg5LDsW9IM0YVKMbeGVCxwzNKIoL55TwW2kUOml2JZsrcTE0Ap9J
SvcpcGs6kzoU8PMzQlmmPYgIU+5NZbd50CohM1TvHE7VPcduB+ydHfo61aF48obU
K3biAxALkcNYG4ab5i83D04Fcfwwgmt5wU/nXvcySTRteeBOtcB+MniZ0fJWG4q1
3czYndwLgWwKa+xOaI0Y1tf5Fc8LEtyGCDQuvDtbA0/cr4RjAYVo9t8cPsKi0Ywk
WEsgk7e2u74UwepmR/SQcKJ25Z70hf9k0vsyGVCPqqGNZPeCOWhiFgphU57Dm2Gm
IX5CncwMT/5jYa1AoZmWmc2SkDIkk+RXq6zaOgncuDtFy78A+DHSzRSnOk5cjXX+
cNu5Er5UEzVxnJGM46C+1/60LnqIpQYyEW5goPhr91So8UPMC+PaK2eNJ+nknSxS
jc2832KlWcKj0Hun7X6fbVHNGX/AKpNzwrYjOy7Rxd0G/ViaspzKSD+eukAFQuKX
PX5pGcO/syzGIzXMP7aRoQ+I0TIIpTaIB9UeuCTzTSzYYmtI/yKgDp9Cbi5yPGD8
EXEVPfL3jmjxMmoYUXVPeE7qHMLm/wlrhrMvhhBKHsvzQ3MfSw9J/lcEnuKGiWYu
PEKRsIdlp2qJL0tseoB/dlwWIMgW7XHT5pg4I9FoX1H1UWC89cs=
=perV
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.11-rc1-try2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"The I2C core gains documentation updates for the testunit, a cleanup
regarding unneeded 'driver_data' and more sanity checks in the char
device.
For the host drivers, this release includes significant updates, with
the primary change being the renaming from "master/slave" to
"controller/target" to adhere to I2C v7 and SMBus 3.2 standards.
New Support:
- Added support for Intel Arrow Lake-H
- Added I2C support in the Arioha SoC by linking the Mediatek I2C
controller
Cleanups:
- Added the MODULE_DESCRIPTION() macro, resolving a modpost warning
in the ALi 1563 Southbridge driver.
- Constified the regmap_config declaration in the i2c-designware
driver.
- Improved the coding style in the Renesas R-Car driver by removing
unnecessary semicolons after brackets.
General improvements:
- In the OMAP device, replaced NOIRQ_SYSTEM_SLEEP_PM_OPS with
RUNTIME_PM_OPS to enable waking up the controller during suspend()
before suspend_noirq() kicks in.
- Improved logging in the Xilinx driver.
- Added a warning (WARN()) in the Renesas R-Car driver for spurious
interrupts.
DTS Changes:
- Removed address-cell and size-cell from the Atmel at91sam, nVidia
Tegra 20, and Samsung S3c2410 devices.
- Fixed Texas Instruments OMAP4 I2C controller to comply with the
i2c-controller.yaml schema.
- Improved indentation in DTS examples for several I2C devices.
- Converted the NXP LPC1788 binding to the dt-schema.
- Added documentation for the compatible string thead,th1520-i2c.
- Added the "power-domains" property for the Meson I2C driver.
AT24 EEPROM driver changes:
- add support for two new Microchip models
- document even more new models in DT bindings (those use fallback
compatibles so no code changes)"
* tag 'i2c-for-6.11-rc1-try2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (87 commits)
i2c: document new callbacks in i2c_algorithm
dt-bindings: i2c: amlogic,meson6-i2c: add optional power-domains
dt-bindings: i2c: at91: Add sama7d65 compatible string
i2c: st: reword according to newest specification
i2c: cpm: reword according to newest specification
i2c: virtio: reword according to newest specification
i2c: nvidia-gpu: reword according to newest specification
i2c: viai2c: reword according to newest specification
i2c: viperboard: reword according to newest specification
i2c: uniphier: reword according to newest specification
i2c: uniphier-f: reword according to newest specification
i2c: tiny-usb: reword according to newest specification
i2c: thunderx-pcidrv: reword according to newest specification
i2c: tegra-bpmp: reword according to newest specification
i2c: taos-evm: reword according to newest specification
i2c: sun6i-p2wi: reword according to newest specification
i2c: stm32f4: reword according to newest specification
i2c: sprd: reword according to newest specification
i2c: sis5595: reword according to newest specification
i2c: rzv2m: reword according to newest specification
...
Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit systems,
have been in linux-next for a while with no reported issues. The
Kconfig fixup went in 29 hours ago, so might have missed the latest
linux-next, but was acked by everyone involved.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZppR4w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykwoQCeIaW3nbOiNTmOupvEnZwrN3yVNs8An3Q5L+Br
1LpTASaU6A8pN81Z1m5g
=6U1z
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc and other driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit
systems, have been in linux-next for a while with no reported issues.
The Kconfig fixup went in 29 hours ago, so might have missed the
latest linux-next, but was acked by everyone involved"
* tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
misc: delete Makefile.rej
binder: fix hang of unregistered readers
misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI
virtio: add missing MODULE_DESCRIPTION() macro
agp: uninorth: add missing MODULE_DESCRIPTION() macro
spmi: add missing MODULE_DESCRIPTION() macros
dev/parport: fix the array out-of-bounds risk
samples: configfs: add missing MODULE_DESCRIPTION() macro
misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
misc: keba: Fix missing AUXILIARY_BUS dependency
slimbus: Fix struct and documentation alignment in stream.c
MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
misc: fastrpc: use coherent pool for untranslated Compute Banks
misc: fastrpc: support complete DMA pool access to the DSP
misc: fastrpc: add missing MODULE_DESCRIPTION() macro
misc: fastrpc: Add missing dev_err newlines
misc: fastrpc: Use memdup_user()
nvmem: core: Implement force_ro sysfs attribute
nvmem: Use sysfs_emit() for type attribute
...
core:
- deprecate DRM data and return 0 date
- connector: Create a set of helpers to help with HDMI support
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- Remove drm_mm_replace_node
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
- New monochrome TV mode variant
ttm:
- improve number of page faults on some platforms
- fix test builds under PREEMPT_RT
- more test coverage
ci:
- Require a more recent version of mesa,
- improve farm setup and test generation
dma-buf:
- warn if reserving 0 fence slots
- internal API heap enhancements
fbdev:
- Create memory manager optimized fbdev emulation
panic:
- Allow to select fonts,
- improve drm_fb_dma_get_scanout_buffer
- Allow to dump kmsg to the screen
bridge:
- Remove redundant checks on bridge->encoder
- Remove drm_bridge_chain_mode_fixup
- bridge-connector: Plumb in the new HDMI helper
- analogix_dp: Various improvements, handle AUX transfers timeout
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes, fix no connector attach, fix clocks
- sii902x: state validation improvements
panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every
ad-hoc implementation in the panel drivers
- More cleanup of prepare / enable state tracking in drivers
- edp: Drop legacy panel compatibles
- simple-bridge: Switch to devm_drm_bridge_add
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE
nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView PM070WL4,
Lincoln Technologies LCD197, Ortustech COM35H3P70ULC,
AUO G104STN01, K&d kd101ne3-40ti
amdgpu:
- DCN 4.0.x support
- GC 12.0 support
- GMC 12.0 support
- SDMA 7.0 support
- MES12 support
- MMHUB 4.1 support
- GFX12 modifier and DCC support
- lots of IP fixes/updates
amdkfd:
- Contiguous VRAM allocations
- GC 12.0 support
- SDMA 7.0 support
- SR-IOV fixes
- KFD GFX ALU exceptions
i915:
- Battlemage Xe2 HPD display enablement
- Panel Replay enabling
- DP AUX-less ALPM/LOBF
- Enable link training failure fallback for DP MST links
- CMRR (Content Match Refresh Rate) enabling
- Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps
- Enable eDP AUX based HDR backlight
- Support replaying GPU hangs with captured context image
- Automate CCS Mode setting during engine resets
- lots of refactoring
- Support replaying GPU hangs with captured context image
- Increase FLR timeout from 3s to 9s
- Enable w/a 16021333562 for DG2, MTL and ARL [guc]
xe:
- update MAINATINERS
- New uapi adding OA functionality to Xe
- expose l3 bank mask
- fix display detect on ADL-N
- runtime PM Fixes
- Fix silent backmerge issues
- More prep for SR-IOV
- HWmon additions
- per client usage info
- Rework GPU page fault handling
- Drop EXEC_QUEUE_FLAG_BANNED
- Add BMG PCI IDs
- Scheduler fixes and improvements
- Rename xe_exec_queue::compute to xe_exec_queue::lr
- Use ttm_uncached for BO with NEEDS_UC flag
- Rename xe perf layer as xe observation layer
- lots of refactoring
radeon:
- Backlight workaround for iMac
- Silence UBSAN flex array warnings
msm:
- Validate registers XML description against schema in CI
- core/dpu: SM7150 support
- mdp5: Add support for MSM8937
- gpu: Add param for userspace to know if raytracing is supported
- gpu: X185 support (aka gpu in X1 laptop chips)
- gpu: a505 support
ivpu:
- hardware scheduler support
- profiling support
- improvements to the platform support layer
- firmware handling improvements
- clocks/power mgmt improvements
- scheduler/logging improvements
habanalabs:
- Gradual sleep in polling memory macro.
- Reduce Gaudi2 MSI-X interrupt count to 128.
- Add Gaudi2-D revision support.
- Add timestamp to CPLD info.
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error.
- Align Gaudi2 interrupt names.
- Check for errors after preboot is ready.
- Change habanalabs maintainer and git repo path.
mgag200:
- refactoring and improvements
- Add BMC output
- enable polling
nouveau:
- add registry command line
v3d:
- perf counters improvements
zynqmp:
- irq and debugfs improvements
atmel-hlcdc:
- Support XLCDC in sam9x7
mipi-dbi:
- Remove mipi_dbi_machine_little_endian
- make SPI bits per word configurable
- support RGB888
- allow pixel formats to be specified in the DT
sun4i:
- Rework the blender setup for DE2
panfrost:
- Enable MT8188 support
vc4:
- Monochrome TV support
exynos:
- fix fallback mode regression
- fix memory leak
- Use drm_edid_duplicate() instead of kmemdup()
etnaviv:
- fix i.MX8MP NPU clock gating
- workaround FE register cdc issues on some cores
- fix DMA sync handling for cached buffers
- fix job timeout handling
- keep TS enabled on MMUv2 cores for improved performance
mediatek:
- Convert to platform remove callback returning void-
- Drop chain_mode_fixup call in mode_valid()
- Fixes the errors of MediaTek display driver found by IGT.
- Add display support for the MT8365-EVK board
- Fix bit depth overwritten for mtk_ovl_set bit_depth()
- Fix possible_crtcs calculation
- Fix spurious kfree()
ast:
- refactor mode setting code
stm:
- Add LVDS support
- DSI PHY updates
-----BEGIN PGP SIGNATURE-----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=g+Ad
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There's a lot of stuff in here, amd, i915 and xe have new platform
work, lots of core rework around EDID handling, some new COMPILE_TEST
options, maintainer changes and a lots of other stuff. Summary:
core:
- deprecate DRM data and return 0 date
- connector: Create a set of helpers to help with HDMI support
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- Remove drm_mm_replace_node
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
- New monochrome TV mode variant
ttm:
- improve number of page faults on some platforms
- fix test builds under PREEMPT_RT
- more test coverage
ci:
- Require a more recent version of mesa
- improve farm setup and test generation
dma-buf:
- warn if reserving 0 fence slots
- internal API heap enhancements
fbdev:
- Create memory manager optimized fbdev emulation
panic:
- Allow to select fonts
- improve drm_fb_dma_get_scanout_buffer
- Allow to dump kmsg to the screen
bridge:
- Remove redundant checks on bridge->encoder
- Remove drm_bridge_chain_mode_fixup
- bridge-connector: Plumb in the new HDMI helper
- analogix_dp: Various improvements, handle AUX transfers timeout
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes, fix no connector attach, fix
clocks
- sii902x: state validation improvements
panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every ad-hoc
implementation in the panel drivers
- More cleanup of prepare / enable state tracking in drivers
- edp: Drop legacy panel compatibles
- simple-bridge: Switch to devm_drm_bridge_add
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0,
BOE nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView
PM070WL4, Lincoln Technologies LCD197, Ortustech
COM35H3P70ULC, AUO G104STN01, K&d kd101ne3-40ti
amdgpu:
- DCN 4.0.x support
- GC 12.0 support
- GMC 12.0 support
- SDMA 7.0 support
- MES12 support
- MMHUB 4.1 support
- GFX12 modifier and DCC support
- lots of IP fixes/updates
amdkfd:
- Contiguous VRAM allocations
- GC 12.0 support
- SDMA 7.0 support
- SR-IOV fixes
- KFD GFX ALU exceptions
i915:
- Battlemage Xe2 HPD display enablement
- Panel Replay enabling
- DP AUX-less ALPM/LOBF
- Enable link training failure fallback for DP MST links
- CMRR (Content Match Refresh Rate) enabling
- Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps
- Enable eDP AUX based HDR backlight
- Support replaying GPU hangs with captured context image
- Automate CCS Mode setting during engine resets
- lots of refactoring
- Support replaying GPU hangs with captured context image
- Increase FLR timeout from 3s to 9s
- Enable w/a 16021333562 for DG2, MTL and ARL [guc]
xe:
- update MAINATINERS
- New uapi adding OA functionality to Xe
- expose l3 bank mask
- fix display detect on ADL-N
- runtime PM Fixes
- Fix silent backmerge issues
- More prep for SR-IOV
- HWmon additions
- per client usage info
- Rework GPU page fault handling
- Drop EXEC_QUEUE_FLAG_BANNED
- Add BMG PCI IDs
- Scheduler fixes and improvements
- Rename xe_exec_queue::compute to xe_exec_queue::lr
- Use ttm_uncached for BO with NEEDS_UC flag
- Rename xe perf layer as xe observation layer
- lots of refactoring
radeon:
- Backlight workaround for iMac
- Silence UBSAN flex array warnings
msm:
- Validate registers XML description against schema in CI
- core/dpu: SM7150 support
- mdp5: Add support for MSM8937
- gpu: Add param for userspace to know if raytracing is supported
- gpu: X185 support (aka gpu in X1 laptop chips)
- gpu: a505 support
ivpu:
- hardware scheduler support
- profiling support
- improvements to the platform support layer
- firmware handling improvements
- clocks/power mgmt improvements
- scheduler/logging improvements
habanalabs:
- Gradual sleep in polling memory macro
- Reduce Gaudi2 MSI-X interrupt count to 128
- Add Gaudi2-D revision support
- Add timestamp to CPLD info
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error
- Align Gaudi2 interrupt names
- Check for errors after preboot is ready
- Change habanalabs maintainer and git repo path
mgag200:
- refactoring and improvements
- Add BMC output
- enable polling
nouveau:
- add registry command line
v3d:
- perf counters improvements
zynqmp:
- irq and debugfs improvements
atmel-hlcdc:
- Support XLCDC in sam9x7
mipi-dbi:
- Remove mipi_dbi_machine_little_endian
- make SPI bits per word configurable
- support RGB888
- allow pixel formats to be specified in the DT
sun4i:
- Rework the blender setup for DE2
panfrost:
- Enable MT8188 support
vc4:
- Monochrome TV support
exynos:
- fix fallback mode regression
- fix memory leak
- Use drm_edid_duplicate() instead of kmemdup()
etnaviv:
- fix i.MX8MP NPU clock gating
- workaround FE register cdc issues on some cores
- fix DMA sync handling for cached buffers
- fix job timeout handling
- keep TS enabled on MMUv2 cores for improved performance
mediatek:
- Convert to platform remove callback returning void-
- Drop chain_mode_fixup call in mode_valid()
- Fixes the errors of MediaTek display driver found by IGT
- Add display support for the MT8365-EVK board
- Fix bit depth overwritten for mtk_ovl_set bit_depth()
- Fix possible_crtcs calculation
- Fix spurious kfree()
ast:
- refactor mode setting code
stm:
- Add LVDS support
- DSI PHY updates"
* tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel: (2501 commits)
drm/amdgpu/mes12: add missing opcode string
drm/amdgpu/mes11: update opcode strings
Revert "drm/amd/display: Reset freesync config before update new state"
drm/omap: Restrict compile testing to PAGE_SIZE less than 64KB
drm/xe: Drop trace_xe_hw_fence_free
drm/xe/uapi: Rename xe perf layer as xe observation layer
drm/amdgpu: remove exp hw support check for gfx12
drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completed
drm/amdgpu: flush all cached ras bad pages to eeprom
drm/amdgpu: select compute ME engines dynamically
drm/amd/display: Allow display DCC for DCN401
drm/amdgpu: select compute ME engines dynamically
drm/amdgpu/job: Replace DRM_INFO/ERROR logging
drm/amdgpu: select compute ME engines dynamically
drm/amd/pm: Ignore initial value in smu response register
drm/amdgpu: Initialize VF partition mode
drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping
MAINTAINERS: fix Xinhui's name
MAINTAINERS: update powerplay and swsmu
drm/qxl: Pin buffer objects for internal mappings
...
Upon adding CONFIG_ARCH_THUNDER & CONFIG_COMPILE_TEST dependency,
compilation errors arise on 32-bit ARM with writeq() & readq() calls
which are used for accessing 64-bit values.
Since DPI hardware only works with 64-bit register accesses, using
CONFIG_64BIT dependency to skip compilation on 32-bit systems.
Fixes: a5e43e2d20 ("misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI")
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240717163739.181236-1-vattunuru@marvell.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I accidentally added drivers/misc/Makefile.rej when applying the
mrvl-cn10k-dpi by hand. Remove it as it's not needed.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 5f67eef6df ("misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds a misc driver for Marvell CN10K DPI(DMA Engine) device's physical
function which initializes DPI DMA hardware's global configuration and
enables hardware mailbox channels between physical function (PF) and
it's virtual functions (VF). VF device drivers (User space drivers) use
this hw mailbox to communicate any required device configuration on it's
respective VF device. Accordingly, this DPI PF driver provisions the
VF device resources.
At the hardware level, the DPI physical function (PF) acts as a management
interface to setup the VF device resources, VF devices are only provisioned
to handle or control the actual DMA Engine's data transfer capabilities.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Reviewed-by: Srujana Challa <schalla@marvell.com>
Link: https://lore.kernel.org/r/20240706153009.3775333-1-vattunuru@marvell.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- add support for two new Microchip models
- document even more new models in DT bindings (those use fallback
compatibles so no code changes)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmaGsXsACgkQEacuoBRx
13J+UBAAm8g9oGKo1kH/t89dCY8//8D1H3QVtcbUhbT89BQbgtq/OGVgPKCsayfO
4NXidcglaoivlQ8VW/8EaMSyO6q4CrBVLLUBUbS9rG1nNOstY7q59trfkXqriqav
QTPdMD4/G5lhI4Nu+6Pu10kkNxrYrQSOI2AaqI5WLQU0cv9KGs2VRjeYAwZwpbr3
dOfDJpwcmCGMywBjuT5zLh/tArzKOPXad5ICZhO9zjIg+kA5KS3+kOAed0n8Cw14
F2vP96WoxaiwhS1E5PJMm01DDgNHdptO3Yhf63rIxYFMEbASnUQyV/oh6FK+wRgK
rN+F0L8+BBra0LpVYtaeHliU4k0Ab4ajmeWXoNJZXHr3XyXAiqh+wme4OavMYQyl
qhq6q4lixO5eOC86yYc/Pkv8p1n6p2XF27L82KQIKHstvZcC8SyZxQmD2AfvGxsY
gOxjT9RCm2a+uRY8dJdcBMHIkzWbw9az8mJEwDGVu0k08r5JGROMJsOeocyxNeT3
Dtz6GuSDvLbeSha00QJa9z3THUJx9SHHtl13P8yhGBRz6G0v8+llrjM1YbiQ6gQ8
3FtdXaoifq0RO4p53n4iAoJfzAHXriVsVFL+VVO8RE4aR3FpltmFkEPT+RfHBynZ
WKCqei7pKAreb0+euaQGbYgaFggTWl54uFe8c7bvXfaU7iSulWU=
=gy00
-----END PGP SIGNATURE-----
Merge tag 'at24-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-mergewindow
at24 updates for v6.11-rc1
- add support for two new Microchip models
- document even more new models in DT bindings (those use fallback
compatibles so no code changes)
These two functions are defined in the pci_endpoint_test.c file, but not
called elsewhere, so delete these unused functions.
This fixes the following warning:
drivers/misc/pci_endpoint_test.c:144:19: warning: unused function 'pci_endpoint_test_bar_readl'.
drivers/misc/pci_endpoint_test.c:150:20: warning: unused function 'pci_endpoint_test_bar_writel'.
No functional changes intended.
[kwilczynski: commit log]
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9064
Link: https://lore.kernel.org/linux-pci/20240704023227.87039-1-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add a comment suggesting that if the endpoint controller Vendor and Device
ID are programmable, an existing entry might be usable for testing without
having to add an entry to pci_endpoint_test_tbl[].
Link: https://lore.kernel.org/linux-pci/20240611125057.1232873-6-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
dma_set_mask_and_coherent() should never fail when the mask is >= 32bit,
unless the architecture has no DMA support. So no need to check for the
error and also no need to set dma_set_mask_and_coherent(32) as a fallback.
Even if dma_set_mask_and_coherent(48) fails due to the lack of DMA support
(theoretically), then dma_set_mask_and_coherent(32) will also fail for the
same reason. So the fallback doesn't make sense.
Simplify the code by setting the streaming and coherent DMA mask to 48
bits.
Link: https://lore.kernel.org/linux-pci/20240502195903.3191049-1-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
The current code uses writel()/readl(), which has an implicit memory
barrier for every single readl()/writel().
Additionally, reading 4 bytes at a time over the PCI bus is not really
optimal, considering that this code is running in an ioctl handler.
Use memcpy_toio()/memcpy_fromio() for BAR tests.
Before patch with a 4MB BAR:
$ time /usr/bin/pcitest -b 1
BAR1: OKAY
real 0m 1.56s
After patch with a 4MB BAR:
$ time /usr/bin/pcitest -b 1
BAR1: OKAY
real 0m 0.54s
Link: https://lore.kernel.org/linux-pci/20240322164139.678228-1-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Rockchip rk3588 requires 64KB alignment for BARs.
While there is an existing device_id:vendor_id in the driver with 64KB
alignment, that device_id:vendor_id is am654, which uses BAR2 instead of
BAR0 as the test_reg_bar, and also has special is_am654_pci_dev() checks
in the driver to disallow BAR0. In order to allow testing all BARs, add a
new rk3588 entry in the driver.
We intentionally do not add the vendor id to pci_ids.h, since the policy
for that file is that the vendor id has to be used by multiple drivers.
Hopefully, this new entry will be short-lived, as there is a series on the
mailing list which intends to move the address alignment restrictions from
this driver to the endpoint side.
Add a new entry for rk3588 in order to allow us to test all BARs.
Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-11-0a042d6b0049@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmaB0NweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGkvwH/36UJRk/o6wvXnyH
E6QjCSWo2226APyWks22NjtC3I/8Iqdvkneuh6wG0qL2sXAB078EMjUq5R81bF8H
wWFBJwetjYTp8GEyLioMEb2wCH/J3R29dLFC4UYTplafXRGP6//xcpJaKmTxcgdR
31IzvTPXbApZ7L3k1U6rA2bK9PNKcFCOvZlrNMUCuwMrabymHsDfOUt1DqXyg2xp
zjqiWYBwlklozmgawSWt/mdEgkWuTcAbg+KyqDVQF59s9aj/OOwZ0j+HACq5V8CM
quTPIAYL6CC9p7uxa69lGr/sgC0Is/BZLPX7RTZAwCgarGvnX+1HUsjDcaFCtrVg
O6fPUV8=
=pgUx
-----END PGP SIGNATURE-----
Merge v6.10-rc6 into drm-next
The exynos-next pull is based on a newer -rc than drm-next. hence
backmerge first to make sure the unrelated conflicts we accumulated
don't end up randomly in the exynos merge pull, but are separated out.
Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma
code, and cherry-pick conflict in xe.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Use fastrpc_remote_heap_alloc to allocate from the FastRPC device
instead of the Compute Bank when the session ID is 0. This ensures
that the allocation is inside the coherent DMA pool which is already
accessible to the DSP. This is necessary to support FastRPC devices
which do not have dedicated Compute Banks such as the SLPI on the SDM845.
The latter uses an allocated CMA region instead of FastRPC Compute Banks.
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705075900.424100-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To support FastRPC Context Banks which aren't mapped via the SMMU,
make the whole reserved memory region available to the DSP to allow
access to coherent buffers.
This is performed by assigning the memory to the DSP via a hypervisor
call to set the correct permissions for the Virtual Machines on the DSP.
This is only necessary when a memory region is provided for SLPI DSPs
so guard this with a domain ID check.
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705075900.424100-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/misc/fastrpc.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705075900.424100-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Few dev_err calls are missing newlines. This can result in unrelated
lines getting appended which might make logs difficult to understand.
Add trailing newlines to avoid this.
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705075900.424100-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Switching to memdup_user() overwrites the allocated memory only once,
whereas kzalloc() followed by copy_from_user() initializes the allocated
memory to zero and then immediately overwrites it.
Fixes the following Coccinelle/coccicheck warning reported by
memdup_user.cocci:
WARNING opportunity for memdup_user
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705075900.424100-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Request a PPI for each vCPU during probe which will be used by the host
to communicate a stall detected event on the vCPU. When the host raises
this interrupt from the virtual machine monitor, the guest is expected to
handle the interrupt and panic.
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Link: https://lore.kernel.org/r/20240703153732.3214238-3-sebastianene@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The KEBA CP500 system FPGA is a PCIe device, which consists of multiple
IP cores. Every IP core has its own auxiliary driver. The cp500 driver
registers an auxiliary device for each device and the corresponding
drivers are loaded by the Linux driver infrastructure.
Currently 3 variants of this device exists. Every variant has its own
PCI device ID, which is used to determine the list of available IP
cores. In this first version only the auxiliary device for the I2C
controller is registered.
Besides the auxiliary device registration some other basic functions of
the FPGA are implemented; e.g, FPGA version sysfs file, keep FPGA
configuration on reset sysfs file, error message for errors on the
internal AXI bus of the FPGA.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20240630194740.7137-2-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a spelling error in a comment.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Tested-by: Jason Chen <jason.z.chen@intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20240625081047.4178494-6-wentong.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before downloading firmware, a command response is required to
identify the silicon. However, when downloading IVSC firmware,
reading data from the SPI transfers with the IVSC ROM is not
necessary. Therefore, the rx buffer of SPI transfer command is
determined based on the specific request of the caller.
Fixes: 566f5ca976 ("mei: Add transport driver for IVSC device")
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Tested-by: Jason Chen <jason.z.chen@intel.com>
Acked-by: Tomas Winker <tomas.winker@intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20240625081047.4178494-5-wentong.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Switch from cpu_to_be32_array() to be32_to_cpu_array() for the
received ROM data.
Fixes: 566f5ca976 ("mei: Add transport driver for IVSC device")
Cc: stable@vger.kernel.org # for 6.8+
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Tested-by: Jason Chen <jason.z.chen@intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20240625081047.4178494-4-wentong.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After completing the firmware download, the firmware requires some
time to become functional. This change introduces additional sleep
time before the first read operation to prevent a confusing timeout
error in vsc_tp_xfer().
Fixes: 566f5ca976 ("mei: Add transport driver for IVSC device")
Cc: stable@vger.kernel.org # for 6.8+
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Tested-by: Jason Chen <jason.z.chen@intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20240625081047.4178494-3-wentong.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During system shutdown, incorporate reset logic to ensure the IVSC
chipset remains in a valid state. This adjustment guarantees that
the IVSC chipset operates in a known state following a warm reboot.
Fixes: 566f5ca976 ("mei: Add transport driver for IVSC device")
Cc: stable@vger.kernel.org # for 6.8+
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Tested-by: Jason Chen <jason.z.chen@intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20240625081047.4178494-2-wentong.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DDR4 DIMMS implementing SPD Annex L, Revision 1 do not implement SPD byte
14 (Module Temperature Sensor); this byte was only added in revision 2 of
the standard. This only applies to DDR4, not DDR4E or LPDDR4, since those
DDR types were only introduced in revision 3 of the standard.
Use this information to instantiate the jc42 device if the module is a DDR4
following SPD revision 1.0 and a device is detected at the expected thermal
sensor address, even if the Module Temperature Sensor byte suggests that
the thermal sensor is not supported.
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240629173716.20389-2-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instantiating a device by calling i2c_new_client_device() assumes that the
device is not already instantiated. If that is not the case, it will return
an error and generate a misleading kernel log message.
i2c i2c-0: Failed to register i2c client jc42 at 0x18 (-16)
This can be reproduced by unloading the ee1004 driver and loading it again.
Avoid this by calling i2c_new_scanned_device() instead, which returns
silently if a device is already instantiated or does not exist.
Fixes: 393bd1000f ("eeprom: ee1004: add support for temperature sensor")
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240629173716.20389-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the driver does not register a nvmem provider, which means
that userspace programs cannot access the ee1004 EEPROM through the
standard nvmem sysfs API.
Fix this by replacing the custom sysfs attribute with a standard nvmem
interface, which also takes care of backwards compatibility.
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240625063459.429953-2-W_Armin@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use devm_add_action_or_reset() to clean up the bus data at
driver removal or when an error occurs during probe.
This will allow us to use other devres-based APIs later.
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240625063459.429953-1-W_Armin@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
While add it, also remove commas after the sentinel entries.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240624125101.1242750-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_interruptible_timeout() causing patterns like:
timeout = wait_for_completion_interruptible_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240604212240.4529-5-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240604212240.4529-4-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_event_interruptible_timeout() causing patterns like:
timeout = wait_event_interruptible_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240604212240.4529-3-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_event_interruptible_timeout() causing patterns like:
timeout = wait_event_interruptible_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240604212240.4529-2-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Read/write callbacks registered with nvmem core expect 0 to be returned
on success and a negative value to be returned on failure.
Currently pci1xxxx_otp_read()/pci1xxxx_otp_write() and
pci1xxxx_eeprom_read()/pci1xxxx_eeprom_write() return the number of
bytes read/written on success.
Fix to return 0 on success.
Fixes: 9ab5465349 ("misc: microchip: pci1xxxx: Add support to read and write into PCI1XXXX EEPROM via NVMEM sysfs")
Fixes: 0969001569 ("misc: microchip: pci1xxxx: Add support to read and write into PCI1XXXX OTP via NVMEM sysfs")
Cc: stable@vger.kernel.org
Signed-off-by: Joy Chakraborty <joychakr@google.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240612070031.1215558-1-joychakr@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Untrusted application with access to only non-secure fastrpc device
node can attach to root_pd or static PDs if it can make the respective
init request. This can cause problems as the untrusted application
can send bad requests to root_pd or static PDs. Add changes to reject
attach to privileged PDs if the request is being made using non-secure
fastrpc device node.
Fixes: 0871561055 ("misc: fastrpc: Add support for audiopd")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240628114501.14310-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Audio PD daemon will allocate memory for audio PD dynamic loading
usage when it is attaching for the first time to audio PD. As
part of this, the memory ownership is moved to the VM where
audio PD can use it. In case daemon process is killed without any
impact to DSP audio PD, the daemon process will retry to attach to
audio PD and in this case memory won't be reallocated. If the invoke
fails due to any reason, as part of err_invoke, the memory ownership
is getting reassigned to HLOS even when the memory was not allocated.
At this time the audio PD might still be using the memory and an
attemp of ownership reassignment would result in memory issue.
Fixes: 0871561055 ("misc: fastrpc: Add support for audiopd")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240628114501.14310-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Audio PD daemon send the name as part of the init IOCTL call. This
name needs to be copied to kernel for which memory is allocated.
This memory is never freed which might result in memory leak. Free
the memory when it is not needed.
Fixes: 0871561055 ("misc: fastrpc: Add support for audiopd")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240628114501.14310-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When user is requesting for DSP capability, the process pd type is
getting updated to USER_PD which is incorrect as DSP will assume the
process which is making the request is a user PD and this will never
get updated back to the original value. The actual PD type should not
be updated for capability request and it should be serviced by the
respective PD on DSP side. Don't change process's PD type for DSP
capability request.
Fixes: 6c16fd8bdd ("misc: fastrpc: Add support to get DSP capabilities")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240628114501.14310-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
User is passing capability ioctl structure(argp) to get DSP
capabilities. This argp is copied to a local structure to get domain
and attribute_id information. After getting the capability, only
capability value is getting copied to user argp which will not be
useful if the use is trying to get the capability by checking the
capability member of fastrpc_ioctl_capability structure. Copy the
complete capability structure so that user can get the capability
value from the expected member of the structure.
Fixes: 6c16fd8bdd ("misc: fastrpc: Add support to get DSP capabilities")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240628114501.14310-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DSP capability request call expects 2 arguments. First is the
information about the total number of attributes to be copied from
DSP and second is the information about the buffer where the DSP
needs to copy the information. The current design is passing the
information about the size to be copied from DSP which would be
considered as a bad argument to the call by DSP causing a failure
suggesting the same. The second argument carries the information
about the buffer where the DSP needs to copy the capability
information and the size to be copied. As the first entry of
capability attribute is getting skipped, same should also be
considered while sending the information to DSP. Add changes to
pass proper arguments to DSP.
Fixes: 6c16fd8bdd ("misc: fastrpc: Add support to get DSP capabilities")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240628114501.14310-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add "microchip,24aa025e48", "microchip,24aa025e64" compatible for the
usage w/ 24AA025E{48, 64} type of EEPROMs where "24aa025e48" stands
for EUI-48 address and "24aa025e64" stands for EUI-64 address.
[andrei.simion@microchip.com: Use AT24_DATA_CHIP with AT24_FLAG_READONLY for
24AA025E{48, 64} type of EEPROMs. Reword commit message.]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://lore.kernel.org/r/20240703084704.197697-2-andrei.simion@microchip.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Set a timeout for MKHI client send operations in the bus fixup routines
to prevent potential lock-ups on the cl_bus_lock mutex.
In rare conditions, such as when the i915 or Xe driver is stopping and
not routing interrupts or when GSC FW is in unexpectedly reset the fixup
routines can get stuck.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240615063159.1460290-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmZvTbAeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGVksIAJEn4a9IVM8FNCJy
Dxo0BItD1/qJ5mLDptqUFRKlxInjbojofz5CyoeIeXb0DwRfB16ALXqNXAkd3APi
saoOpfjFsg2H2OqL9CHdkzWcJEAq2lDnL0zaOjumeDVu/EyeT+tC4e4hq1e6Bm0E
fPC5ms2b+07DF9Rg6/DW8yPbdM5n6Mz1bRd3fQOIgvpM3yGOyGztEBgTRub/ZUgH
5pNJauknFAZgdiWhgNpc+lPWYZbgHKULQPhUBPdVhDIXPtQNUlKgNTQc6+L0Nmbb
K1sG1q7FLeMJOTFGQfD4r26X5DNQUi894q/9SX8X7rcrECdJKcw2WjVyB4myADpf
ae2gP+A=
=XjWP
-----END PGP SIGNATURE-----
Merge tag 'v6.10-rc4' into char-misc-next
We need the char-misc and iio fixes in here as well to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a memory leak (forget to free allocated buffers) in a
memory allocation failure path.
Fix it to jump to the correct error handling code.
Fixes: 393fc2f594 ("misc: microchip: pci1xxxx: load auxiliary bus driver for the PIO function in the multi-function endpoint of pci1xxxx device.")
Signed-off-by: Yongzhi Liu <hyperlyzcs@gmail.com>
Reviewed-by: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>
Link: https://lore.kernel.org/r/20240523121434.21855-4-hyperlyzcs@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When auxiliary_device_add() returns error and then calls
auxiliary_device_uninit(), callback function
gp_auxiliary_device_release() calls ida_free() and
kfree(aux_device_wrapper) to free memory. We should't
call them again in the error handling path.
Fix this by skipping the redundant cleanup functions.
Fixes: 393fc2f594 ("misc: microchip: pci1xxxx: load auxiliary bus driver for the PIO function in the multi-function endpoint of pci1xxxx device.")
Signed-off-by: Yongzhi Liu <hyperlyzcs@gmail.com>
Link: https://lore.kernel.org/r/20240523121434.21855-3-hyperlyzcs@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240510211454.2274614-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use DEVICE_ATTR_WO() helper instead of plain DEVICE_ATTR(),
which makes the code a bit shorter and easier to read.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240508184905.2102633-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use modern string_choices API instead of manually determining the
output using ternary operator.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240508184905.2102633-10-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to have an explicit casting when we can simply use
the correct printf() specifier.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240508184905.2102633-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sscanf() is a heavy one and moreover requires additional boundary checks.
Convert driver to use kstrtobool() in eeprom_93xx46_store_erase().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240508184905.2102633-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently there is only one way how chip is prepared and unprepared
for an operation. Drop unnecessary customisation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240508184905.2102633-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
First of all, there is no user for the platform data in the kernel.
Second, it needs a lot of updates to follow the modern standards
of the kernel, including proper Device Tree bindings and device
property handling.
For now, just hide the legacy platform data in the driver's code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240508184905.2102633-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This converts the driver to use GPIO descriptors exclusively
to retrieve GPIO lines. Drop the old GPIO handling in favor of
the core managing it exclusively.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240508184905.2102633-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The update to support other (bigger) types of EEPROMs broke
the driver loading due to removal of the default size.
Fix this by adding the respective (new) flag to the platform data.
Fixes: 14374fbb3f ("misc: eeprom_93xx46: Add new 93c56 and 93c66 compatible strings")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240508184905.2102633-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.
Include mod_devicetable.h explicitly to replace the dropped of.h
which included mod_devicetable.h indirectly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240508184905.2102633-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using an initializer for a union only one of the union members
must be initialized. The initializer for the acpi_object union variable
passed as argument to the SID ACPI method was initializing both
the type and the integer members of the union.
Unfortunately rather then complaining about this gcc simply ignores
the first initializer and only used the second integer.value = 1
initializer. Leaving type set to 0 which leads to the argument being
skipped by acpi acpi_ns_evaluate() resulting in:
ACPI Warning: \_SB.PC00.SPI1.SPFD.CVFD.SID: Insufficient arguments -
Caller passed 0, method requires 1 (20240322/nsarguments-232)
Fix this by initializing only the integer struct part of the union
and initializing both members of the integer struct.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Fixes: 566f5ca976 ("mei: Add transport driver for IVSC device")
Reviewed-by: Wentong Wu <wentong.wu@intel.com>
Link: https://lore.kernel.org/r/20240603205050.505389-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dynamically created mei client device (mei csi) is used as one V4L2
sub device of the whole video pipeline, and the V4L2 connection graph is
built by software node. The mei_stop() and mei_restart() will delete the
old mei csi client device and create a new mei client device, which will
cause the software node information saved in old mei csi device lost and
the whole video pipeline will be broken.
Removing mei_stop()/mei_restart() during system suspend/resume can fix
the issue above and won't impact hardware actual power saving logic.
Fixes: f6085a96c9 ("mei: vsc: Unregister interrupt handler for system suspend")
Cc: stable@vger.kernel.org # for 6.8+
Reported-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Jason Chen <jason.z.chen@intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240527123835.522384-1-wentong.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/misc/open-dice.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240603-md-misc-open-dice-v1-1-ee7972ae0d39@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mei_me_pci_resume doesn't release irq on the error path,
in case mei_start() fails.
Cc: <stable@kernel.org>
Fixes: 33ec082631 ("mei: revamp mei reset state machine")
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240604090728.1027307-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change level for the "not connected" client message in the write
callback from error to debug.
The MEI driver currently disconnects all clients upon system suspend.
This behavior is by design and user-space applications with
open connections before the suspend are expected to handle errors upon
resume, by reopening their handles, reconnecting,
and retrying their operations.
However, the current driver implementation logs an error message every
time a write operation is attempted on a disconnected client.
Since this is a normal and expected flow after system resume
logging this as an error can be misleading.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240530091415.725247-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5f53384118e33123d3c87b94cc8835360237698b.1717075103.git.jani.nikula@intel.com
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5c1626978d2552ef5732dcf9427c903046afb9c1.1717075103.git.jani.nikula@intel.com
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
v2: Also change Documentation/gpu/i915.rst (Andi)
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a8c07233a8234858eb6711140482ef8db4c91cf4.1717075103.git.jani.nikula@intel.com
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/461662d528c3f327c81b764b7c883cd4519d8729.1717075103.git.jani.nikula@intel.com
The __assign_str() macro logic of the TRACE_EVENT() macro was optimized so
that it no longer needs the second argument. The __assign_str() is always
matched with __string() field that takes a field name and the source for
that field:
__string(field, source)
The TRACE_EVENT() macro logic will save off the source value and then use
that value to copy into the ring buffer via the __assign_str(). Before
commit c1fa617cae ("tracing: Rework __assign_str() and __string() to not
duplicate getting the string"), the __assign_str() needed the second
argument which would perform the same logic as the __string() source
parameter did. Not only would this add overhead, but it was error prone as
if the __assign_str() source produced something different, it may not have
allocated enough for the string in the ring buffer (as the __string()
source was used to determine how much to allocate)
Now that the __assign_str() just uses the same string that was used in
__string() it no longer needs the source parameter. It can now be removed.
-----BEGIN PGP SIGNATURE-----
iIkEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZk9RMBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qur+AP9jbSYaGhzZdJ7a3HGA8M4l6JNju8nC
GcX1JpJT4z1qvgD3RkoNvP87etDAUAqmbVhVWnUHCY/vTqr9uB/gqmG6Ag==
=Y+6f
-----END PGP SIGNATURE-----
Merge tag 'trace-assign-str-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing cleanup from Steven Rostedt:
"Remove second argument of __assign_str()
The __assign_str() macro logic of the TRACE_EVENT() macro was
optimized so that it no longer needs the second argument. The
__assign_str() is always matched with __string() field that takes a
field name and the source for that field:
__string(field, source)
The TRACE_EVENT() macro logic will save off the source value and then
use that value to copy into the ring buffer via the __assign_str().
Before commit c1fa617cae ("tracing: Rework __assign_str() and
__string() to not duplicate getting the string"), the __assign_str()
needed the second argument which would perform the same logic as the
__string() source parameter did. Not only would this add overhead, but
it was error prone as if the __assign_str() source produced something
different, it may not have allocated enough for the string in the ring
buffer (as the __string() source was used to determine how much to
allocate)
Now that the __assign_str() just uses the same string that was used in
__string() it no longer needs the source parameter. It can now be
removed"
* tag 'trace-assign-str-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/treewide: Remove second parameter of __assign_str()
Several new features here:
- virtio-net is finally supported in vduse.
- Virtio (balloon and mem) interaction with suspend is improved
- vhost-scsi now handles signals better/faster.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmZN570PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp2JUH/1K3fZOHymop6Y5Z3USFS7YdlF+dniedY/vg
TKyWERkXOlxq1d9DVxC0mN7tk72DweuWI0YJjLXofrEW1VuW29ecSbyFXxpeWJls
b7ErffxDAFRas5jkMCngD8TuFnbEegU0mGP5kbiHpEndBydQ2hH99Gg0x7swW+cE
xsvU5zonCCLwLGIP2DrVrn9qGOHtV6o8eZfVKDVXfvicn3lFBkUSxlwEYsO9RMup
aKxV4FT2Pb1yBicwBK4TH1oeEXqEGy1YLEn+kAHRbgoC/5L0/LaiqrkzwzwwOIPj
uPGkacf8CIbX0qZo5EzD8kvfcYL1xhU3eT9WBmpp2ZwD+4bINd4=
=nax1
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- virtio-net is finally supported in vduse
- virtio (balloon and mem) interaction with suspend is improved
- vhost-scsi now handles signals better/faster
And fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
virtio-pci: Check if is_avq is NULL
virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
MAINTAINERS: add Eugenio Pérez as reviewer
vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
vp_vdpa: don't allocate unused msix vectors
sound: virtio: drop owner assignment
fuse: virtio: drop owner assignment
scsi: virtio: drop owner assignment
rpmsg: virtio: drop owner assignment
nvdimm: virtio_pmem: drop owner assignment
wifi: mac80211_hwsim: drop owner assignment
vsock/virtio: drop owner assignment
net: 9p: virtio: drop owner assignment
net: virtio: drop owner assignment
net: caif: virtio: drop owner assignment
misc: nsm: drop owner assignment
iommu: virtio: drop owner assignment
drm/virtio: drop owner assignment
gpio: virtio: drop owner assignment
firmware: arm_scmi: virtio: drop owner assignment
...
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
Here is the big set of char/misc and other driver subsystem updates for
6.10-rc1. Nothing major here, just lots of new drivers and updates for
apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk3lTg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynhZQCfSWyK0lHsys2LhEBmufrB3RCgnZwAn3Lm2eJY
WVk7h01A0lHyacrzm5LN
=s95M
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
- Add support for X-Powers AXP717 PMIC to AXP22X
- Add support for Rockchip RK816 PMIC to RK8XX
- Add support for TI TPS65224 PMIC to TPS6594
- New Functionality
- Add Power Off functionality to Rohm BD71828
- Allow I2C SMBus access in Renesas RSMU
- Fix-ups
- Device Tree binding adaptions/conversions/creation
- Shift Intel support over to MSI interrupts
- Generify adding platform data away from being ACPI specific
- Use device core supplied attribute to register sysfs entries
- Replace hand-rolled functionality with generic APIs
- Utilise centrally provided helpers and macros
- Clean-up error handling
- Remove superfluous/duplicated/unused sections
- Trivial; spelling, whitespace, coding-style adaptions
- More Maple Tree conversions
-----BEGIN PGP SIGNATURE-----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=QAjw
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Device Support:
- Add support for X-Powers AXP717 PMIC to AXP22X
- Add support for Rockchip RK816 PMIC to RK8XX
- Add support for TI TPS65224 PMIC to TPS6594
New Functionality:
- Add Power Off functionality to Rohm BD71828
- Allow I2C SMBus access in Renesas RSMU
Fix-ups:
- Device Tree binding adaptions/conversions/creation
- Shift Intel support over to MSI interrupts
- Generify adding platform data away from being ACPI specific
- Use device core supplied attribute to register sysfs entries
- Replace hand-rolled functionality with generic APIs
- Utilise centrally provided helpers and macros
- Clean-up error handling
- Remove superfluous/duplicated/unused sections
- Trivial; spelling, whitespace, coding-style adaptions
- More Maple Tree conversions"
* tag 'mfd-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (44 commits)
dt-bindings: mfd: Use full path to other schemas
mfd: rsmu: support I2C SMBus access
dt-bindings: mfd: Convert lp873x.txt to json-schema
dt-bindings: mfd: aspeed: Drop 'oneOf' for pinctrl node
dt-bindings: mfd: allwinner,sun6i-a31-prcm: Use hyphens in node names
mfd: ssbi: Remove unused field 'slave' from 'struct ssbi'
mfd: kempld: Remove custom DMI matching code
mfd: cs42l43: Update patching revision check
dt-bindings: mfd: qcom: pm8xxx: Add pm8901 compatible
mfd: timberdale: Remove redundant assignment to variable err
dt-bindings: mfd: qcom,spmi-pmic: Add pbs to SPMI device types
dt-bindings: mfd: syscon: Add ti,am62p-cpsw-mac-efuse compatible
dt-bindings: mfd: qcom,tcsr: Add compatible for SDX75
mfd: axp20x: Convert to use Maple Tree register cache
mfd: bd71828: Remove commented code lines
mfd: intel-m10-bmc: Change staging size to a variable
dt-bindings: mfd: Add ROHM BD71879
mfd: Tidy Kconfig dependency's parentheses
mfd: ocelot-spi: Use spi_sync_transfer()
dt-bindings: mfd: syscon: Add missing simple syscon compatibles
...
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-15-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
-----BEGIN PGP SIGNATURE-----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=xjoS
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
since there's no requirement to describe them in E820 and some
platforms require ECAM to work (Bjorn Helgaas)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
Le Moal)
- Remove last user and pci_enable_device_io() (Heiner Kallweit)
- Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)
- Skip waiting for devices that have been disconnected while
suspended (Ilpo Järvinen)
- Clear Secondary Status errors after enumeration since Master Aborts
and Unsupported Request errors are an expected part of enumeration
(Vidya Sagar)
MSI:
- Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)
Error handling:
- Mask Genesys GL975x SD host controller Replay Timer Timeout
correctable errors caused by a hardware defect; the errors cause
interrupts that prevent system suspend (Kai-Heng Feng)
- Fix EDR-related _DSM support, which previously evaluated revision 5
but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)
ASPM:
- Simplify link state definitions and mask calculation (Ilpo
Järvinen)
Power management:
- Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
apparently doesn't know how to put them back in D0 (Mario
Limonciello)
CXL:
- Support resetting CXL devices; special handling required because
CXL Ports mask Secondary Bus Reset by default (Dave Jiang)
DOE:
- Support DOE Discovery Version 2 (Alexey Kardashevskiy)
Endpoint framework:
- Set endpoint BAR to be 64-bit if the driver says that's all the
device supports, in addition to doing so if the size is >2GB
(Niklas Cassel)
- Simplify endpoint BAR allocation and setting interfaces (Niklas
Cassel)
Cadence PCIe controller driver:
- Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
Kozlowski)
Cadence PCIe endpoint driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
Freescale Layerscape PCIe controller driver:
- Convert DT binding to YAML (Frank Li)
MediaTek MT7621 PCIe controller driver:
- Add DT binding missing 'reg' property for child Root Ports
(Krzysztof Kozlowski)
- Fix theoretical string truncation in PHY name (Sergio Paracuellos)
NVIDIA Tegra194 PCIe controller driver:
- Return success for endpoint probe instead of falling through to the
failure path (Vidya Sagar)
Renesas R-Car PCIe controller driver:
- Add DT binding missing IOMMU properties (Geert Uytterhoeven)
- Add DT binding R-Car V4H compatible for host and endpoint mode
(Yoshihiro Shimoda)
Rockchip PCIe controller driver:
- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)
- Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)
- Set the Subsystem Vendor ID, which was previously zero because it
was masked incorrectly (Rick Wertenbroek)
Synopsys DesignWare PCIe controller driver:
- Restructure DBI register access to accommodate devices where this
requires Refclk to be active (Manivannan Sadhasivam)
- Remove the deinit() callback, which was only need by the
pcie-rcar-gen4, and do it directly in that driver (Manivannan
Sadhasivam)
- Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
up things like eDMA (Manivannan Sadhasivam)
- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
to dw_pcie_ep_init() (Manivannan Sadhasivam)
- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
reflect the actual functionality (Manivannan Sadhasivam)
- Call dw_pcie_ep_init_registers() directly from all the glue
drivers, not just those that require active Refclk from the host
(Manivannan Sadhasivam)
- Remove the "core_init_notifier" flag, which was an obscure way for
glue drivers to indicate that they depend on Refclk from the host
(Manivannan Sadhasivam)
TI J721E PCIe driver:
- Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)
- Add DT binding J722S SoC support (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Add DT binding missing num-viewport, phys and phy-name properties
(Jan Kiszka)
Miscellaneous:
- Constify and annotate with __ro_after_init (Heiner Kallweit)
- Convert DT bindings to YAML (Krzysztof Kozlowski)
- Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
Zhou)"
* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
Revert "genirq/msi: Provide constants for PCI/IMS support"
Revert "x86/apic/msi: Enable PCI/IMS"
Revert "iommu/vt-d: Enable PCI/IMS"
Revert "iommu/amd: Enable PCI/IMS"
Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
...
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent
code generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
-----BEGIN PGP SIGNATURE-----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=D5B/
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_choice_menu() in sym_check_prop()
rapidio: remove choice for enumeration
kconfig: lxdialog: remove initialization with A_NORMAL
kconfig: m/nconf: merge two item_add_str() calls
kconfig: m/nconf: remove dead code to display value of bool choice
kconfig: m/nconf: remove dead code to display children of choice members
kconfig: gconf: show checkbox for choice correctly
kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
Makefile: remove redundant tool coverage variables
kbuild: provide reasonable defaults for tool coverage
modules: Drop the .export_symbol section from the final modules
kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
kconfig: use sym_get_choice_menu() in conf_write_defconfig()
kconfig: add sym_get_choice_menu() helper
kconfig: turn defaults and additional prompt for choice members into error
kconfig: turn missing prompt for choice members into error
kconfig: turn conf_choice() into void function
kconfig: use linked list in sym_set_changed()
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
kconfig: gconf: remove debug code
...
The ntsync code is only partially enabled in the kernel at this point in
time, creating the device node and that's about it. Don't confuse
systems that expect to see a working ntsync interface by teasing it with
this basic structure at this point in time, so mark the code as "broken"
so that it is not built and enabled just yet.
Once the rest of the code is accepted, this will be reverted so that the
driver can be correctly built and used, but for now, this is the safest
way forward.
Reviewed-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/2024051450-abrasion-swizzle-550b@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now Kbuild provides reasonable defaults for objtool, sanitizers, and
profilers.
Remove redundant variables.
Note:
This commit changes the coverage for some objects:
- include arch/mips/vdso/vdso-image.o into UBSAN, GCOV, KCOV
- include arch/sparc/vdso/vdso-image-*.o into UBSAN
- include arch/sparc/vdso/vma.o into UBSAN
- include arch/x86/entry/vdso/extable.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vdso-image-*.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vdso32-setup.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vma.o into GCOV, KCOV
- include arch/x86/um/vdso/vma.o into KASAN, GCOV, KCOV
I believe these are positive effects because all of them are kernel
space objects.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Roberto Sassu <roberto.sassu@huawei.com>
- selftests: Add str*cmp tests (Ivan Orlov)
- __counted_by: provide UAPI for _le/_be variants (Erick Archer)
- Various strncpy deprecation refactors (Justin Stitt)
- stackleak: Use a copy of soon-to-be-const sysctl table (Thomas Weißschuh)
- UBSAN: Work around i386 -regparm=3 bug with Clang prior to version 19
- Provide helper to deal with non-NUL-terminated string copying
- SCSI: Fix older string copying bugs (with new helper)
- selftests: Consolidate string helper behavioral tests
- selftests: add memcpy() fortify tests
- string: Add additional __realloc_size() annotations for "dup" helpers
- LKDTM: Fix KCFI+rodata+objtool confusion
- hardening.config: Enable KCFI
-----BEGIN PGP SIGNATURE-----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=CgsW
-----END PGP SIGNATURE-----
Merge tag 'hardening-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"The bulk of the changes here are related to refactoring and expanding
the KUnit tests for string helper and fortify behavior.
Some trivial strncpy replacements in fs/ were carried in my tree. Also
some fixes to SCSI string handling were carried in my tree since the
helper for those was introduce here. Beyond that, just little fixes
all around: objtool getting confused about LKDTM+KCFI, preparing for
future refactors (constification of sysctl tables, additional
__counted_by annotations), a Clang UBSAN+i386 crash fix, and adding
more options in the hardening.config Kconfig fragment.
Summary:
- selftests: Add str*cmp tests (Ivan Orlov)
- __counted_by: provide UAPI for _le/_be variants (Erick Archer)
- Various strncpy deprecation refactors (Justin Stitt)
- stackleak: Use a copy of soon-to-be-const sysctl table (Thomas
Weißschuh)
- UBSAN: Work around i386 -regparm=3 bug with Clang prior to
version 19
- Provide helper to deal with non-NUL-terminated string copying
- SCSI: Fix older string copying bugs (with new helper)
- selftests: Consolidate string helper behavioral tests
- selftests: add memcpy() fortify tests
- string: Add additional __realloc_size() annotations for "dup"
helpers
- LKDTM: Fix KCFI+rodata+objtool confusion
- hardening.config: Enable KCFI"
* tag 'hardening-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (29 commits)
uapi: stddef.h: Provide UAPI macros for __counted_by_{le, be}
stackleak: Use a copy of the ctl_table argument
string: Add additional __realloc_size() annotations for "dup" helpers
kunit/fortify: Fix replaced failure path to unbreak __alloc_size
hardening: Enable KCFI and some other options
lkdtm: Disable CFI checking for perms functions
kunit/fortify: Add memcpy() tests
kunit/fortify: Do not spam logs with fortify WARNs
kunit/fortify: Rename tests to use recommended conventions
init: replace deprecated strncpy with strscpy_pad
kunit/fortify: Fix mismatched kvalloc()/vfree() usage
scsi: qla2xxx: Avoid possible run-time warning with long model_num
scsi: mpi3mr: Avoid possible run-time warning with long manufacturer strings
scsi: mptfusion: Avoid possible run-time warning with long manufacturer strings
fs: ecryptfs: replace deprecated strncpy with strscpy
hfsplus: refactor copy_name to not use strncpy
reiserfs: replace deprecated strncpy with scnprintf
virt: acrn: replace deprecated strncpy with strscpy
ubsan: Avoid i386 UBSAN handler crashes with Clang
ubsan: Remove 1-element array usage in debug reporting
...
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmY39LkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGaB8H+wWcwT1O7K2SQx1a
sHDYJSXfbjgShS7Wt+gbDNvhGJqG/5FkpHyBmBKUdElZs8QMf21GAbIfJvzcNThA
g+FakIMjfhNH/dr6TJXHWbb2NZV67exDbbuaQDyMhNhIZqil4BH/OEPbLYIdquvm
/HDGFB/whVoHVC+Ug8esEOL3Uy+rizBDlsT/K4ZgpOC3TuUmlRpptSVACwjcCGXM
PFKyyTIr0ZnKcz3+4yTEtpDFm6e/ujxMwM66GBCgmPaZ3lJp5ruY3kGpBTmSyoqV
Rh3CQlIhBo8gwlAx/yQXfxEZomhxT6DfRpc6s/1W0J1UZN/j2pYy056OYyckG32c
uQ9ujxQ=
=M0wP
-----END PGP SIGNATURE-----
Merge 6.9-rc7 into char-misc-testing
We need the char-misc changes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are some small char/misc/other driver fixes and new device ids for
6.9-rc7 that resolve some reported problems.
Included in here are:
- iio driver fixes
- mei driver fix and new device ids
- dyndbg bugfix
- pvpanic-pci driver bugfix
- slimbus driver bugfix
- fpga new device id
All have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZjdD2Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk38wCeJeUXW4/yQ4BTj7cHir0aOowVs+UAnAxCUwzt
NpooaVg3v9tzLtvAOp1O
=YfmA
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/other driver fixes and new device ids
for 6.9-rc7 that resolve some reported problems.
Included in here are:
- iio driver fixes
- mei driver fix and new device ids
- dyndbg bugfix
- pvpanic-pci driver bugfix
- slimbus driver bugfix
- fpga new device id
All have been in linux-next with no reported problems"
* tag 'char-misc-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
slimbus: qcom-ngd-ctrl: Add timeout for wait operation
dyndbg: fix old BUG_ON in >control parser
misc/pvpanic-pci: register attributes via pci_driver
fpga: dfl-pci: add PCI subdevice ID for Intel D5005 card
mei: me: add lunar lake point M DID
mei: pxp: match against PCI_CLASS_DISPLAY_OTHER
iio:imu: adis16475: Fix sync mode setting
iio: accel: mxc4005: Reset chip on probe() and resume()
iio: accel: mxc4005: Interrupt handling fixes
dt-bindings: iio: health: maxim,max30102: fix compatible check
iio: pressure: Fixes SPI support for BMP3xx devices
iio: pressure: Fixes BME280 SPI driver data
orginal only do clear EXPRESS_LINK_FAIL reg when card removed,
this patch moved the flow to SD_INT statement, make sure the reg status is
correct when inserted/removed card every time.
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20240430060108.580685-1-ricky_wu@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core can properly handle constant struct bus_type,
move the tifm_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://lore.kernel.org/r/20240423023810.1889264-1-chentao@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Coverity spotted that event_msg is controlled by user-space,
event_msg->event_data.event is passed to event_deliver() and used
as an index without sanitization.
This change ensures that the event index is sanitized to mitigate any
possibility of speculative information leaks.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc.
Only compile tested, no access to HW.
Fixes: 1d990201f9 ("VMCI: event handling implementation.")
Cc: stable <stable@kernel.org>
Signed-off-by: Hagar Gamal Halim Hemdan <hagarhem@amazon.com>
Link: https://lore.kernel.org/stable/20231127193533.46174-1-hagarhem%40amazon.com
Link: https://lore.kernel.org/r/20240430085916.4753-1-hagarhem@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After a successful pci_iomap_range() call, pci_iounmap() should be called
in the error handling path, as already done in the remove function.
Add the missing call.
The corresponding call was added in the remove function in commit
5ee109828e ("VMCI: dma dg: allocate send and receive buffers for DMA
datagrams")
Fixes: e283a0e8b7 ("VMCI: dma dg: add MMIO access to registers")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Vishnu Dasa <vishnu.dasa@broadcom.com>
Link: https://lore.kernel.org/r/a35bbc3876ae1da70e49dafde4435750e1477be3.1713961553.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The EXEC_RODATA test plays a lot of tricks to live in the .rodata section,
and once again ran into objtool's (completely reasonable) assumptions
that executable code should live in an executable section. However, this
manifested only under CONFIG_CFI_CLANG=y, as one of the .cfi_sites was
pointing into the .rodata section.
Since we're testing non-CFI execution properties in perms.c (and
rodata.c), we can disable CFI for the involved functions, and remove the
CFI arguments from rodata.c entirely.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202308301532.d7acf63e-oliver.sang@intel.com
Fixes: 6342a20efb ("objtool: Add elf_create_section_pair()")
Link: https://lore.kernel.org/r/20240430234953.work.760-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
In __pci_register_driver(), the pci core overwrites the dev_groups field of
the embedded struct device_driver with the dev_groups from the outer
struct pci_driver unconditionally.
Set dev_groups in the pci_driver to make sure it is used.
This was broken since the introduction of pvpanic-pci.
Fixes: db3a4f0abe ("misc/pvpanic: add PCI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Fixes: ded13b9cfd ("PCI: Add support for dev_groups to struct pci_driver")
Link: https://lore.kernel.org/r/20240411-pvpanic-pci-dev-groups-v1-1-db8cb69f1b09@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shutdown requests are normally hardware dependent.
By extending pvpanic to also handle shutdown requests, guests can
submit such requests with an easily implementable and cross-platform
mechanism.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20240412-pvpanic-shutdown-v3-1-c214e9873b3f@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove 'default n' attribute of 'LATTICE_ECP3_CONFIG' option
because it is redundant. 'n' is automatic default value when
one is not specified.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Link: https://lore.kernel.org/r/20240412055221.69411-3-ppandit@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix indentation of SGI_GRU option's help text by adding
leading spaces. Generally help text is indented by two
more spaces beyond the leading tab <\t> character.
It helps Kconfig parsers to read file without error.
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Link: https://lore.kernel.org/r/20240412055221.69411-2-ppandit@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ID table already has respective entry and MODULE_DEVICE_TABLE and
creates proper alias for SPI driver. Having another MODULE_ALIAS causes
the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414154957.127113-3-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ID table already has respective entry and MODULE_DEVICE_TABLE and
creates proper alias for SPI driver. Having another MODULE_ALIAS causes
the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414154957.127113-1-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- move the nvmem registration after the test one-byte read to improve the
situation with a race condition in nvmem
- fix the DT schema for ST M24C64-D
-----BEGIN PGP SIGNATURE-----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=OVCJ
-----END PGP SIGNATURE-----
Merge tag 'at24-fixes-for-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current
at24 fixes for v6.9-rc6
- move the nvmem registration after the test one-byte read to improve the
situation with a race condition in nvmem
- fix the DT schema for ST M24C64-D
In vmci_guest_probe_device(), remove the reference to PCI_IRQ_LEGACY by
using PCI_IRQ_ALL_TYPES instead of an explicit OR of all IRQ types.
Link: https://lore.kernel.org/r/20240325070944.3600338-14-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ATS-M class is PCI_CLASS_DISPLAY_OTHER instead of
PCI_CLASS_DISPLAY_VGA, so we need to match against that class as well.
The matching is still restricted to Intel devices only.
Fixes: ceeedd951f ("mei: pxp: match without driver name")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240421090701.216028-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core can properly handle constant struct bus_type,
move the mei_cl_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240423024133.1890455-1-chentao@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the eeprom is not accessible, an nvmem device will be registered, the
read will fail, and the device will be torn down. If another driver
accesses the nvmem device after the teardown, it will reference
invalid memory.
Move the failure point before registering the nvmem device.
Signed-off-by: Daniel Okazaki <dtokazaki@google.com>
Fixes: b20eb4c1f0 ("eeprom: at24: drop unnecessary label")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240422174337.2487142-1-dtokazaki@google.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This corresponds to the NT syscall NtReleaseSemaphore().
This increases the semaphore's internal counter by the given value, and returns
the previous value. If the counter would overflow the defined maximum, the
function instead fails and returns -EOVERFLOW.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20240329000621.148791-4-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This corresponds to the NT syscall NtCreateSemaphore().
Semaphores are one of three types of object to be implemented in this driver,
the others being mutexes and events.
An NT semaphore contains a 32-bit counter, and is signaled and can be acquired
when the counter is nonzero. The counter has a maximum value which is specified
at creation time. The initial value of the semaphore is also specified at
creation time. There are no restrictions on the maximum and initial value.
Each object is exposed as an file, to which any number of fds may be opened.
When all fds are closed, the object is deleted.
Objects hold a pointer to the ntsync_device that created them. The device's
reference count is driven by struct file.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20240329000621.148791-3-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ntsync uses a misc device as the simplest and least intrusive uAPI interface.
Each file description on the device represents an isolated NT instance, intended
to correspond to a single NT virtual machine.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20240329000621.148791-2-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unregister the MEI VSC interrupt handler before system suspend and
re-register it at system resume time. This mirrors implementation of other
MEI devices.
This patch fixes the bug that causes continuous stream of MEI VSC errors
after system resume.
Fixes: 386a766c41 ("mei: Add MEI hardware support for IVSC device")
Cc: stable@vger.kernel.org # for 6.8
Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240403051341.3534650-2-wentong.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 058a38acba.
It's not necessary to avoid a spinlock, a sleeping lock on PREEMPT_RT, in
an interrupt handler as the interrupt handler itself would be called in a
process context if PREEMPT_RT is enabled. So revert the patch.
Cc: stable@vger.kernel.org # for 6.8
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240403051341.3534650-1-wentong.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rts5264 driver not clean express link error and set EXTRA_CAPS_SD_EXPRESS
capability back when card removed
Fixes: 6a511c9b3a ("misc: rtsx: add to support new card reader rts5264")
Cc: stable <stable@kernel.org>
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20240314065113.5962-1-ricky_wu@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extend the quirk to disable MEI interface on Intel PCH Ignition (IGN)
and SPS firmwares for RPL-S devices. These firmwares do not support
the MEI protocol.
Fixes: 3ed8c7d39c ("mei: me: add raptor lake point S DID")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240312051958.118478-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.
After commit 4029238364 ("mei: revamp mei extension header structure layout.")
it seems that flexible-array member `data` in `struct mei_ext_hdr` is no longer
needed. So, remove it and, with that, fix 45 of the following
-Wflex-array-member-not-at-end warnings[1] in drivers/misc/mei/:
drivers/misc/mei/hw.h:280:28: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Link: https://gist.github.com/GustavoARSilva/62dcc235555a6b29b506269edb83da0b [1]
Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZgHYE2s5kBGlv1cw@neat
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- CONFIG_MEMCPY_SLOW_KUNIT_TEST is no longer needed (Guenter Roeck)
- Fix needless UTF-8 character in arch/Kconfig (Liu Song)
- Improve __counted_by warning message in LKDTM (Nathan Chancellor)
- Refactor DEFINE_FLEX() for default use of __counted_by
- Disable signed integer overflow sanitizer on GCC < 8
-----BEGIN PGP SIGNATURE-----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=1LW2
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.9-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull more hardening updates from Kees Cook:
- CONFIG_MEMCPY_SLOW_KUNIT_TEST is no longer needed (Guenter Roeck)
- Fix needless UTF-8 character in arch/Kconfig (Liu Song)
- Improve __counted_by warning message in LKDTM (Nathan Chancellor)
- Refactor DEFINE_FLEX() for default use of __counted_by
- Disable signed integer overflow sanitizer on GCC < 8
* tag 'hardening-v6.9-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lkdtm/bugs: Improve warning message for compilers without counted_by support
overflow: Change DEFINE_FLEX to take __counted_by member
Revert "kunit: memcpy: Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST"
arch/Kconfig: eliminate needless UTF-8 character in Kconfig help
ubsan: Disable signed integer overflow sanitizer on GCC < 8
The current message for telling the user that their compiler does not
support the counted_by attribute in the FAM_BOUNDS test does not make
much sense either grammatically or semantically. Fix it to make it
correct in both aspects.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240321-lkdtm-improve-lack-of-counted_by-msg-v1-1-0fbf7481a29c@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Here is the big set of char/misc and a number of other driver subsystem
updates for 6.9-rc1. Included in here are:
- IIO driver updates, loads of new ones and evolution of existing ones
- coresight driver updates
- const cleanups for many driver subsystems
- speakup driver additions
- platform remove callback void cleanups
- mei driver updates
- mhi driver updates
- cdx driver updates for MSI interrupt handling
- nvmem driver updates
- other smaller driver updates and cleanups, full details in the
shortlog
All of these have been in linux-next for a long time with no reported
issue, other than a build warning with some older versions of gcc for a
speakup driver, fix for that will come in a few days when I catch up
with my pending patch queues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZfwuLg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynKVACgjvR1cD8NYk9PcGWc9ZaXAZ6zSnwAn260kMoe
lLFtwszo7m0N6ZULBWBd
=y3yz
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and a number of other driver
subsystem updates for 6.9-rc1. Included in here are:
- IIO driver updates, loads of new ones and evolution of existing ones
- coresight driver updates
- const cleanups for many driver subsystems
- speakup driver additions
- platform remove callback void cleanups
- mei driver updates
- mhi driver updates
- cdx driver updates for MSI interrupt handling
- nvmem driver updates
- other smaller driver updates and cleanups, full details in the
shortlog
All of these have been in linux-next for a long time with no reported
issue, other than a build warning for the speakup driver"
The build warning hits clang and is a gcc (and C23) extension, and is
fixed up in the merge.
Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/
* tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits)
binder: remove redundant variable page_addr
uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion
uio_pruss: UIO_MEM_DMA_COHERENT conversion
cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT
uio: introduce UIO_MEM_DMA_COHERENT type
cdx: add MSI support for CDX bus
pps: use cflags-y instead of EXTRA_CFLAGS
speakup: Add /dev/synthu device
speakup: Fix 8bit characters from direct synth
parport: sunbpp: Convert to platform remove callback returning void
parport: amiga: Convert to platform remove callback returning void
char: xillybus: Convert to platform remove callback returning void
vmw_balloon: change maintainership
MAINTAINERS: change the maintainer for hpilo driver
char: xilinx_hwicap: Fix NULL vs IS_ERR() bug
hpet: remove hpets::hp_clocksource
platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH
char: xilinx_hwicap: drop casting to void in dev_set_drvdata
greybus: move is_gb_* functions out of greybus.h
greybus: Remove usage of the deprecated ida_simple_xx() API
...
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series "mm:
zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is hotplugged
as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving policy
wherein we allocate memory across nodes in a weighted fashion rather
than uniformly. This is beneficial in heterogeneous memory environments
appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the process
has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown situations.
The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings" Ryan
Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's series
"Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page faults.
He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction test",
Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess in
our handling of DAX on archiecctures which have virtually aliasing data
caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides dramatic
improvements in worst-case mmap_lock hold times during certain
userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability improvements
in his series "Mitigate a vmap lock contention". It realizes a 12x
improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging of
large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages() to
an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which are
configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZfJpPQAKCRDdBJ7gKXxA
joxeAP9TrcMEuHnLmBlhIXkWbIR4+ki+pA3v+gNTlJiBhnfVSgD9G55t1aBaRplx
TMNhHfyiHYDTx/GAV9NXW84tasJSDgA=
=TG55
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
This release sees some exciting changes from David Lechner which
implements some optimisations that have been talked about for a long
time which allows client drivers to pre-prepare SPI messages for
repeated or low latency use. This lets us move work out of latency
sensitive paths and avoid repeating work for frequently performed
operations. As well as being useful in itself this will also be used in
future to allow controllers to directly trigger SPI operations (eg, from
interrupts).
Otherwise this release has mostly been focused on cleanups, plus a
couple of new devices:
- Support for pre-optimising messages.
- A big set of updates from Uwe Kleine-König moving drivers to use APIs
with more modern terminology for controllers.
- Major overhaul of the s3c64xx driver.
- Support for Google GS101 and Samsung Exynos850.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmXvHx0ACgkQJNaLcl1U
h9ATVQf/WafEp7ddJ23bRaHZx/gBCMgv8N6mN7OBnzB2pMIGL56SPf9fGAmCUQKt
mne6fDg6/RpydG/72TFppUjRFLN9CwoJjJfQIXMgOqYuPaMEnrj1wbcXar3MeeX2
8hS1u7wKwhOuuwLmoqqMOTKyGUj2mHsBOTOo0vm4WM1s9IHhY5TG2clYv1A+KZbj
kSHE5m7YnBLwimwu0+hsXnRNHZUGKVksQ/9t7AD7/7L8aPj9jPqu1EjTS1/6IDB0
QDVyW7Z6hX7YoUx48gp+j/UFJ7ZyxTajy+0wvzPHou3KJARgFfNZWT2XvvYcpA0/
yqcpbCUwZ1AETXHcmly7YwNpPV9LBg==
=+Xw/
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This release sees some exciting changes from David Lechner which
implements some optimisations that have been talked about for a long
time which allows client drivers to pre-prepare SPI messages for
repeated or low latency use. This lets us move work out of latency
sensitive paths and avoid repeating work for frequently performed
operations. As well as being useful in itself this will also be used
in future to allow controllers to directly trigger SPI operations (eg,
from interrupts).
Otherwise this release has mostly been focused on cleanups, plus a
couple of new devices:
- Support for pre-optimising messages
- A big set of updates from Uwe Kleine-König moving drivers to use
APIs with more modern terminology for controllers
- Major overhaul of the s3c64xx driver
- Support for Google GS101 and Samsung Exynos850"
* tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (122 commits)
spi: Introduce SPI_INVALID_CS and is_valid_cs()
spi: Fix types of the last chip select storage variables
spi: Consistently use BIT for cs_index_mask
spi: Exctract spi_dev_check_cs() helper
spi: Exctract spi_set_all_cs_unused() helper
spi: s3c64xx: switch exynos850 to new port config data
spi: s3c64xx: switch gs101 to new port config data
spi: s3c64xx: deprecate fifo_lvl_mask, rx_lvl_offset and port_id
spi: s3c64xx: get rid of the OF alias ID dependency
spi: s3c64xx: introduce s3c64xx_spi_set_port_id()
spi: s3c64xx: let the SPI core determine the bus number
spi: s3c64xx: allow FIFO depth to be determined from the compatible
spi: s3c64xx: retrieve the FIFO depth from the device tree
spi: s3c64xx: determine the fifo depth only once
spi: s3c64xx: allow full FIFO masks
spi: s3c64xx: define a magic value
spi: dt-bindings: introduce FIFO depth properties
spi: axi-spi-engine: use struct_size() macro
spi: axi-spi-engine: use __counted_by() attribute
spi: axi-spi-engine: remove p from struct spi_engine_message_state
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmXwH0wACgkQu+CwddJF
iJq3HAf6A/0m0pSr0QDcwjM8D7TVYQJ+Z/jPC6Mj+HfTcF8Otrgk8c0M6EsHGIGF
GQNnYJRKmBla3mpVFvDtsVZuiakEtRLCpoP5n23s8p8gY9ibJcl6bpn9NaMVMKrq
kBnhQ9VdLAgKVcTH8wz6jJqdWiZ7W4jGH5NWO+nr+r0H7vay7jfB0+tur1NO8J09
HE5I76XE6ArRvaKYxvsZmOx1pihSmsJ7CerXN6Y8U5qcuxNXdUO/9rf+uv5llDIV
gl54UAU79koZ9k88t5AiSKO2IZVhBgC/j66ds9MRRAFCf/ldxUtJIlsHTOnumfmy
FApqwtR0MYNPeMPZpzogQbv58oOcNw==
=XDxn
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- Freelist loading optimization (Chengming Zhou)
When the per-cpu slab is depleted and a new one loaded from the cpu
partial list, optimize the loading to avoid an irq enable/disable
cycle. This results in a 3.5% performance improvement on the "perf
bench sched messaging" test.
- Kernel boot parameters cleanup after SLAB removal (Xiongwei Song)
Due to two different main slab implementations we've had boot
parameters prefixed either slab_ and slub_ with some later becoming
an alias as both implementations gained the same functionality (i.e.
slab_nomerge vs slub_nomerge). In order to eventually get rid of the
implementation-specific names, the canonical and documented
parameters are now all prefixed slab_ and the slub_ variants become
deprecated but still working aliases.
- SLAB_ kmem_cache creation flags cleanup (Vlastimil Babka)
The flags had hardcoded #define values which became tedious and
error-prone when adding new ones. Assign the values via an enum that
takes care of providing unique bit numbers. Also deprecate
SLAB_MEM_SPREAD which was only used by SLAB, so it's a no-op since
SLAB removal. Assign it an explicit zero value. The removals of the
flag usage are handled independently in the respective subsystems,
with a final removal of any leftover usage planned for the next
release.
- Misc cleanups and fixes (Chengming Zhou, Xiaolei Wang, Zheng Yejian)
Includes removal of unused code or function parameters and a fix of a
memleak.
* tag 'slab-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: remove PARTIAL_NODE slab_state
mm, slab: remove memcg_from_slab_obj()
mm, slab: remove the corner case of inc_slabs_node()
mm/slab: Fix a kmemleak in kmem_cache_destroy()
mm, slab, kasan: replace kasan_never_merge() with SLAB_NO_MERGE
mm, slab: use an enum to define SLAB_ cache creation flags
mm, slab: deprecate SLAB_MEM_SPREAD flag
mm, slab: fix the comment of cpu partial list
mm, slab: remove unused object_size parameter in kmem_cache_flags()
mm/slub: remove parameter 'flags' in create_kmalloc_caches()
mm/slub: remove unused parameter in next_freelist_entry()
mm/slub: remove full list manipulation for non-debug slab
mm/slub: directly load freelist from cpu partial slab in the likely case
mm/slub: make the description of slab_min_objects helpful in doc
mm/slub: replace slub_$params with slab_$params in slub.rst
mm/slub: unify all sl[au]b parameters with "slab_$param"
Documentation: kernel-parameters: remove noaliencache
- string.h and related header cleanups (Tanzir Hasan, Andy Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev, Harshit
Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure (Michael
Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer
-----BEGIN PGP SIGNATURE-----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=OP+o
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As is pretty normal for this tree, there are changes all over the
place, especially for small fixes, selftest improvements, and improved
macro usability.
Some header changes ended up landing via this tree as they depended on
the string header cleanups. Also, a notable set of changes is the work
for the reintroduction of the UBSAN signed integer overflow sanitizer
so that we can continue to make improvements on the compiler side to
make this sanitizer a more viable future security hardening option.
Summary:
- string.h and related header cleanups (Tanzir Hasan, Andy
Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev,
Harshit Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure
(Michael Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob
Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer"
* tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (51 commits)
selftests/powerpc: Fix load_unaligned_zeropad build failure
string: Convert helpers selftest to KUnit
string: Convert selftest to KUnit
sh: Fix build with CONFIG_UBSAN=y
compiler.h: Explain how __is_constexpr() works
overflow: Allow non-type arg to type_max() and type_min()
VMCI: Fix possible memcpy() run-time warning in vmci_datagram_invoke_guest_handler()
lib/string_helpers: Add flags param to string_get_size()
x86, relocs: Ignore relocations in .notes section
objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks
overflow: Use POD in check_shl_overflow()
lib: stackinit: Adjust target string to 8 bytes for m68k
sparc: vdso: Disable UBSAN instrumentation
kernel.h: Move lib/cmdline.c prototypes to string.h
leaking_addresses: Provide mechanism to scan binary files
leaking_addresses: Ignore input device status lines
leaking_addresses: Use File::Temp for /tmp files
MAINTAINERS: Update LEAKING_ADDRESSES details
fortify: Improve buffer overflow reporting
fortify: Add KUnit tests for runtime overflows
...
Since commit 43a7206b09 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the tifm_adapter_class structure to be declared at build
time placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240301-class_cleanup-char-misc-v1-1-4e2a41bef8cc@marliere.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pmd_large() is always defined as pmd_leaf(). Merge their usages. Chose
pmd_leaf() because pmd_leaf() is a global API, while pmd_large() is not.
Link: https://lkml.kernel.org/r/20240305043750.93762-8-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On Arrow Lake S systems, MEI is no longer strictly connected to bus 0,
while graphics remain exclusively on bus 0. Adapt the component
matching logic to accommodate this change:
Original behavior: Required both MEI and graphics to be on the same
bus 0.
New behavior: Only enforces graphics to be on bus 0 (integrated),
allowing MEI to reside on any bus.
This ensures compatibility with Arrow Lake S and maintains functionality
for the legacy systems.
Fixes: 1dd924f688 ("mei: gsc_proxy: add gsc proxy driver")
Cc: stable@vger.kernel.org # v6.3+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240220200020.231192-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For CMA memory allocation, ownership is assigned to DSP to make it
accessible by the PD running on the DSP. With current implementation
HLOS VM is stored in the channel structure during rpmsg_probe and
this VM is passed to qcom_scm call as the source VM.
The qcom_scm call will overwrite the passed source VM with the next
VM which would cause a problem in case the scm call is again needed.
Adding a local copy of source VM whereever scm call is made to avoid
this problem.
Fixes: 0871561055 ("misc: fastrpc: Add support for audiopd")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240224114247.85953-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/198112757eac0fc004677a4757ce48ae7c7194ab.1708508896.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/705b89c3cd7c0a42ce3f482f202204f5e3377aa2.1708508896.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/4b964bd133f5af11cabd51a4d8ed95025583eb93.1708508896.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/250337c967bdb5019a3c9fe8e0d082cd65400227.1708508896.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/946ebc33a01bf700171257cd219fbe8626bc0c99.1708508896.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/8e7179794ffbcaa4ad3d0db50cc4aa03f377fc8c.1708508896.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/8e14f0b1cea107e613fa0075b3379a9f1e7ef63f.1708508896.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/8775e9573fec55c5fc04151800829e9aeafc5dda.1708508896.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/d138bc7f6ec39038d2b5a23478fc036a41988bde.1708508896.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/add08320eef9ea20ceca78648370590a4bd447b0.1708508896.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/45719fc31bb893bb9ab1450057e9cb7f399e9ee2.1708508896.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it, simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20240304180829.1201726-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Assign all possible fields of pinfo in variable declaration, instead of
just zeroing it there.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-and-Reviewed-by: Wentong Wu <wentong.wu@intel.com>
Link: https://lore.kernel.org/r/20240219195807.517742-4-sakari.ailus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vsc_tp_wakeup_request() called wait_event_timeout() with
gpiod_get_value_cansleep() which may sleep, and does so as the
implementation is that of gpio-ljca.
Move the GPIO state check outside the call.
Fixes: 566f5ca976 ("mei: Add transport driver for IVSC device")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-and-Reviewed-by: Wentong Wu <wentong.wu@intel.com>
Link: https://lore.kernel.org/r/20240219195807.517742-3-sakari.ailus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The hard IRQ handler vsc_tp_irq() is called with a raw spinlock taken.
wake_up() acquires a spinlock, a sleeping lock on PREEMPT_RT. This leads
to sleeping in atomic context.
Move the wake_up() call to the threaded IRQ handler vsc_tp_thread_isr()
where it can be safely called.
Fixes: 566f5ca976 ("mei: Add transport driver for IVSC device")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-and-Reviewed-by: Wentong Wu <wentong.wu@intel.com>
Link: https://lore.kernel.org/r/20240219195807.517742-2-sakari.ailus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .shutdown(), .remove(), and power management callbacks are never called
unless .probe() has already returned success, which means it has set
drvdata to a non-NULL pointer, so "dev" can never be NULL in the other
callbacks.
Remove the unnecessary checks.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240229181300.352077-4-helgaas@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .shutdown(), .remove(), and power management callbacks are never called
unless .probe() has already returned success, which means it has set
drvdata to a non-NULL pointer, so "dev" can never be NULL in the other
callbacks.
Remove the unnecessary checks.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240229181300.352077-3-helgaas@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() and power management callbacks are never called unless
.probe() has already returned success, which means it has set drvdata to a
non-NULL pointer, so "dev" can never be NULL in the other callbacks.
Remove the unnecessary checks.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240229181300.352077-2-helgaas@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When not configured for wakeup lis3lv02d_i2c_suspend() will call
lis3lv02d_poweroff() even if the device has already been turned off
by the runtime-suspend handler and if configured for wakeup and
the device is runtime-suspended at this point then it is not turned
back on to serve as a wakeup source.
Before commit b1b9f7a494 ("misc: lis3lv02d_i2c: Add missing setting
of the reg_ctrl callback"), lis3lv02d_poweroff() failed to disable
the regulators which as a side effect made calling poweroff() twice ok.
Now that poweroff() correctly disables the regulators, doing this twice
triggers a WARN() in the regulator core:
unbalanced disables for regulator-dummy
WARNING: CPU: 1 PID: 92 at drivers/regulator/core.c:2999 _regulator_disable
...
Fix lis3lv02d_i2c_suspend() to not call poweroff() a second time if
already runtime-suspended and add a poweron() call when necessary to
make wakeup work.
lis3lv02d_i2c_resume() has similar issues, with an added weirness that
it always powers on the device if it is runtime suspended, after which
the first runtime-resume will call poweron() again, causing the enabled
count for the regulator to increase by 1 every suspend/resume. These
unbalanced regulator_enable() calls cause the regulator to never
be turned off and trigger the following WARN() on driver unbind:
WARNING: CPU: 1 PID: 1724 at drivers/regulator/core.c:2396 _regulator_put
Fix this by making lis3lv02d_i2c_resume() mirror the new suspend().
Fixes: b1b9f7a494 ("misc: lis3lv02d_i2c: Add missing setting of the reg_ctrl callback")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/regressions/5fc6da74-af0a-4aac-b4d5-a000b39a63a5@molgen.mpg.de/
Cc: stable@vger.kernel.org
Cc: regressions@lists.linux.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 15 7590
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20240220190035.53402-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The changes are similar to those given in the commit 19b070fefd
("VMCI: Fix memcpy() run-time warning in dg_dispatch_as_host()").
Fix filling of the msg and msg_payload in dg_info struct, which prevents a
possible "detected field-spanning write" of memcpy warning that is issued
by the tracking mechanism __fortify_memcpy_chk.
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://lore.kernel.org/r/20240219105315.76955-1-kovalev@altlinux.org
Signed-off-by: Kees Cook <keescook@chromium.org>
In commit 8caab75fd2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.
To be able to remove these compatibility macros push the renaming into
this driver.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/3c93bf41d2399d06b5a379a76c8f6e877f3560b7.1707324794.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Syzkaller hit 'WARNING in dg_dispatch_as_host' bug.
memcpy: detected field-spanning write (size 56) of single field "&dg_info->msg"
at drivers/misc/vmw_vmci/vmci_datagram.c:237 (size 24)
WARNING: CPU: 0 PID: 1555 at drivers/misc/vmw_vmci/vmci_datagram.c:237
dg_dispatch_as_host+0x88e/0xa60 drivers/misc/vmw_vmci/vmci_datagram.c:237
Some code commentry, based on my understanding:
544 #define VMCI_DG_SIZE(_dg) (VMCI_DG_HEADERSIZE + (size_t)(_dg)->payload_size)
/// This is 24 + payload_size
memcpy(&dg_info->msg, dg, dg_size);
Destination = dg_info->msg ---> this is a 24 byte
structure(struct vmci_datagram)
Source = dg --> this is a 24 byte structure (struct vmci_datagram)
Size = dg_size = 24 + payload_size
{payload_size = 56-24 =32} -- Syzkaller managed to set payload_size to 32.
35 struct delayed_datagram_info {
36 struct datagram_entry *entry;
37 struct work_struct work;
38 bool in_dg_host_queue;
39 /* msg and msg_payload must be together. */
40 struct vmci_datagram msg;
41 u8 msg_payload[];
42 };
So those extra bytes of payload are copied into msg_payload[], a run time
warning is seen while fuzzing with Syzkaller.
One possible way to fix the warning is to split the memcpy() into
two parts -- one -- direct assignment of msg and second taking care of payload.
Gustavo quoted:
"Under FORTIFY_SOURCE we should not copy data across multiple members
in a structure."
Reported-by: syzkaller <syzkaller@googlegroups.com>
Suggested-by: Vegard Nossum <vegard.nossum@oracle.com>
Suggested-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240105164001.2129796-2-harshit.m.mogalapalli@oracle.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Use struct_size() instead of open coding.
Suggested-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240105164001.2129796-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Kees Cook <keescook@chromium.org>
In commit edb6538da3df ("lkdtm/bugs: Adjust lkdtm_HUNG_TASK() to avoid
tail call optimization") we marked lkdtm_HUNG_TASK() as
__noreturn. The compiler gets unhappy if it thinks a __noreturn
function might return, so there's a BUG_ON(1) at the end. Any human
can see that the function won't return and the compiler can figure
that out too. Except when it can't.
The MIPS architecture defines HAVE_ARCH_BUG_ON and defines its own
version of BUG_ON(). The MIPS version of BUG_ON() is not a macro but
is instead an inline function. Apparently this prevents the compiler
from realizing that the condition to BUG_ON() is constant and that the
function will never return.
Let's change the BUG_ON(1) to just BUG(), which it should have been to
begin with. The only reason I used BUG_ON(1) to begin with was because
I was used to using WARN_ON(1) when writing test code and WARN() and
BUG() are oddly inconsistent in this manner. :-/
Fixes: edb6538da3df ("lkdtm/bugs: Adjust lkdtm_HUNG_TASK() to avoid tail call optimization")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401262204.wUFKRYZF-lkp@intel.com/
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240126072852.1.Ib065e528a8620474a72f15baa2feead1f3d89865@changeid
Signed-off-by: Kees Cook <keescook@chromium.org>
When testing with lkdtm_HUNG_TASK() and looking at the output, I
expected to see lkdtm_HUNG_TASK() in the stack crawl but it wasn't
there. Instead, the top function on at least some devices was
schedule() due to tail call optimization.
Let's do two things to help here:
1. We'll mark this as "__noreturn". On GCC at least this is documented
to prevent tail call optimization. The docs [1] say "In order to
preserve backtraces, GCC will never turn calls to noreturn
functions into tail calls."
2. We'll add a BUG_ON(1) at the end which means that schedule() is no
longer a tail call. Note that this is potentially important because
if we _did_ end up returning from schedule() due to some weird
issue then we'd potentially be violating the "noreturn" that we
told the compiler about. BUG is the right thing to do here.
[1] https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240122164935.2.I26e8f68c312824fcc80c19d4e91de2d2bef958f0@changeid
Signed-off-by: Kees Cook <keescook@chromium.org>
The comments for lkdtm_do_action() explicitly call out that it
shouldn't be inlined because we want it to show up in stack
crawls. However, at least with some compilers / options it's still
vanishing due to tail call optimization. Let's add a return value to
the function to make it harder for the compiler to do tail call
optimization here.
Now that we have a return value, we can actually use it in the
callers, which is a minor improvement in the code.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240122164935.1.I345e485f36babad76370c59659a706723750d950@changeid
Signed-off-by: Kees Cook <keescook@chromium.org>
When probing the open-dice driver with PROVE_LOCKING=y, lockdep
complains that the mutex in 'drvdata->lock' has a non-static key:
| INFO: trying to register non-static key.
| The code is fine but needs lockdep annotation, or maybe
| you didn't initialize this object before use?
| turning off the locking correctness validator.
Fix the problem by initialising the mutex memory with mutex_init()
instead of __MUTEX_INITIALIZER().
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Brazdil <dbrazdil@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240126152410.10148-1-will@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In remoteproc shutdown sequence, rpmsg_remove will get called which
would depopulate all the child nodes that have been created during
rpmsg_probe. This would result in cb_remove call for all the context
banks for the remoteproc. In cb_remove function, session 0 is
getting skipped which is not correct as session 0 will never become
available again. Add changes to mark session 0 also as invalid.
Fixes: f6f9279f2b ("misc: fastrpc: Add Qualcomm fastrpc basic driver model")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Link: https://lore.kernel.org/r/20240108114833.20480-1-quic_ekangupt@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Optionally depend on either i915 or Xe drivers.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240123101625.220365-5-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Optionally depend on either i915 or Xe drivers.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240123101625.220365-4-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xe driver uses this component too, but current match function
matches by i915 driver name.
Remove dependency on i915 driver name in component_match function.
Use PCI header information to match Intel graphics device.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240123101625.220365-3-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xe driver uses this component too, but current match function
matches by i915 driver name.
Remove dependency on i915 driver name in component_match function.
Use PCI header information to match Intel graphics device.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240123101625.220365-2-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for gsc mei auxiliary device created by Xe driver
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240123101625.220365-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In `ilo_probe()`, the loop variable `minor` isn't really the minor
device number, it's the channel or slot number. Rename it to `slot` for
consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20240119132032.106053-3-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Each iLO device is allocated `max_ccb` minor device numbers (one for
each channel). When `ilo_probe()` calls `device_create()` in a loop,
the minor device numbers passed to `device_create()` start at 0. For
consistency with the call to `cdev_add()`, and for consistency with the
calls to `device_destroy()` from `ilo_remove()`, the minor device
numbers passed to `device_create()` should start at the value in the
variable `start`. Fix it.
This is a logical bug rather than an actual bug, because the number of
supported devices is `MAX_ILO_DEV` which is defined as `1`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20240119132032.106053-2-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
