CVS is located between IPU device and sensors and is available in
existing commercial platforms from multiple OEMs. The connection
information between them in firmware is not enough to build a V4L2
connection graph. This patch parses the connection properties from the
SSDB buffer in DSDT and builds the connection using software nodes.
From the IPU bridge point of view, CVS is just like IVSC.
Signed-off-by: Miguel Vadillo <miguel.vadillo@intel.com>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 13 9350 + IPU7
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add an in-tree AVMatrix HWS PCIe capture driver. The driver supports
up to four HDMI inputs and exposes the video capture path through
V4L2 with vb2-dma-contig streaming, DV timings, and per-input
controls. Audio support is intentionally omitted from this
submission.
This patch also adds the MAINTAINERS entry for the new driver.
This driver is derived from a GPL out-of-tree driver.
Changes since v6:
- v6 accidently contained legacy history, resubmitting with latest
- remove an unused mode-change label reported by W=1
Changes since v5:
- keep queue_setup() and alloc_sizeimage on the logical sizeimage value
- drop the dead queue_setup() fallback that rebuilt pix.sizeimage
on the fly
- clarify that hws_calc_sizeimage() models the packed-YUYV-only path
- add Assisted-by attribution for Codex
Changes since v4:
- replace plain 64-bit elapsed-time divisions in debug logging with
div_u64() so i386 module builds do not emit __udivdi3 references
Changes since v3:
- fold the MAINTAINERS update into this patch so per-patch CI sees the
new file pattern
- wrap the validation text for checkpatch
Changes since v2:
- keep scratch DMA allocation on a single probe-owned path
- avoid double-freeing V4L2 control handlers on register unwind
- drop the extra per-node resolution sysfs ABI
- turn live geometry changes into explicit SOURCE_CHANGE renegotiation
- report live DV timings and reject attempts to retime a live source
- stop advertising RESOLUTION source changes for fps-only updates
- keep live fps state across harmless S_FMT restarts
- stop exposing an unvalidated DV RX power-present signal
- clean the imported sources for checkpatch and W=1 builds
Validation:
- build-tested with W=1 against a local kernel build tree
- compiled the driver with ARCH=i386 allmodconfig and verified the
resulting hws_pci.o, hws_video.o, and hws.o do not reference
__udivdi3
- v4l2-compliance 1.33.0-5459 from v4l-utils commit
4a0d2c3b4f523406cb9a6f4c541ef14f72f19f3d on /dev/video2:
48 tests succeeded, 0 failed, 1 warning
DV_RX_POWER_PRESENT is intentionally left unsupported in this revision
because current hardware evidence does not expose a validated
receiver-side power-detect signal distinct from active video presence.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202604020522.z22eZuW8-lkp@intel.com/
Assisted-by: Codex:gpt-5.5
Signed-off-by: Ben Hoff <hoff.benjamin.k@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly request
WQ_PERCPU.
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In saa7134_video_init1(), the return value of the first
saa7134_pgtable_alloc() is not checked. If it fails, the function
continues as if successful, leaving the driver with an invalid page
table. Additionally, if vb2_queue_init() for the VBI queue fails after
the video queue page table has been allocated, the allocated memory is
not freed before returning. The second saa7134_pgtable_alloc() also
lacks a return value check. Errors occur during device probing before
the device is fully registered, the normal cleanup path in
saa7134_finidev() is not executed, leading to memory leaks and
potential use of uninitialized DMA resources.
Check the return value of both saa7134_pgtable_alloc() calls and
propagate errors. On failure of any later step, free allocated page
tables to avoid memory leaks. Ensure control handlers are also
released on error to prevent further resource leakage.
Found by code review.
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Cc: stable@vger.kernel.org
Fixes: a00e68888d ("[media] saa7134: move saa7134_pgtable to saa7134_dmaqueue")
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add a check for the return value of pci_ioremap_bar()
in cx23885_dev_setup().
If ioremap for BAR0 fails, release the already allocated
PCI memory region,
decrement the device count, and return -ENODEV.
This prevents a potential null pointer dereference and
ensures proper cleanup
on memory mapping failure.
Fixes: d19770e517 ("V4L/DVB (6150): Add CX23885/CX23887 PCIe bridge driver")
Cc: stable@vger.kernel.org
Signed-off-by: Wang Jun <1742789905@qq.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Destroy allocated workqueue in remove() callback to free its resources,
thus fixing memory leak.
Fixes: 519a4bdcf8 ("V4L/DVB (11984): Add support for yet another SDMC DM1105 based DVB-S card.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The return value of dm1105_dma_map(), which handles DMA memory allocation,
is ignored in dm1105_hw_init(). If dma_alloc_coherent() fails, the driver
will proceed using a NULL pointer for DMA transfers, leading to a kernel
oops or invalid hardware access.
Fix this by checking the return value and propagating -ENOMEM on failure.
Signed-off-by: Zhaoyang Yu <2426767509@qq.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The same kconfig 'select FONT_8x16' appears twice for VIDEO_SOLO6X10.
I propose removing the second instance, as it is effectively dead code.
This dead code was found by kconfirm, a static analysis tool for Kconfig.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The get_hsfreq_by_mbps() function searches the freqranges[] table
backward (from highest to lowest index). Because adjacent frequency
bands overlap, a data rate that falls in the overlap region always
lands on the higher-indexed band.
For data rates up to 1500 Mbps (index 42) every band uses
osc_freq_target 335. Starting at index 43 (1461-1640 Mbps) the
osc_freq_target drops to 208. A sensor running at 1498 Mbps sits in
the overlap between index 42 (1414-1588, osc 335) and index 43
(1461-1640, osc 208). The backward search picks index 43, programming
the lower osc_freq_target of 208 instead of the optimal 335.
This causes DDL lock instability and CSI-2 CRC errors on affected
configurations, such as the OmniVision OV08X40 sensor on Intel Arrow
Lake platforms (Dell Pro Max 16).
Rewrite get_hsfreq_by_mbps() to select the optimal band:
1. Among bands whose min/max range covers the data rate, prefer
the one with the higher osc_freq_target.
2. If osc_freq_target is equal, prefer the band whose default_mbps
is closest to the requested rate.
Since the frequency ranges are monotonically increasing, the loop
exits early once min exceeds the requested rate.
For 1498 Mbps this now correctly selects index 42 (osc_freq_target
335, range 1414-1588) instead of index 43 (osc_freq_target 208,
range 1461-1640).
Fixes: 1e7eeb3016 ("media: intel/ipu6: add the CSI2 DPHY implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Marco Nenciarini <mnencia@kcore.it>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Provide the real DV timings limits in VIDIOC_DV_TIMINGS_CAP. For the
outputs the pixelclock is limited by the CMT table <25000kHz, 2*94642kHz>,
for the inputs a slightly broader range is possible. The minimal
supported/tested resolution is 64px.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Initialized and left to themselves some boards with analog inputs,
on some modern platforms can throw critical errors which prevents
even digital from working thereafter. If analog is never used this
module parameter allows analog to be disabled on a card by card
basis.
It is already possible to disable analog audio.
For example, to disable for Hauppauge QuadHD with analog functionality:
options cx23885 disable_analog_video=56,57
can be placed insode of /etc/modprobe.d/cx23885.conf
Signed-off-by: Bradford Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Some rc device drivers have a race condition between rc_unregister_device()
and irq or urb callbacks. This is because rc_unregister_device() does two
things, it marks the device as unregistered so no new commands can be
issued and then it calls rc_free_device(). This means the driver has no
chance to cancel any pending urb callbacks or interrupts after the device
has been marked as unregistered. Those callbacks may access struct rc_dev
or its members (e.g. struct ir_raw_event_ctrl), which have been freed by
rc_free_device().
This change removes the implicit call to rc_free_device() from
rc_unregister_device(). This means that device drivers can call
rc_unregister_device() in their remove or disconnect function, then cancel
all the urbs and interrupts before explicitly calling rc_free_device().
Note this is an alternative fix for an issue found by Haotian Zhang, see
the Closes: tags.
Reported-by: Haotian Zhang <vulab@iscas.ac.cn>
Closes: https://lore.kernel.org/linux-media/20251114101432.2566-1-vulab@iscas.ac.cn/
Closes: https://lore.kernel.org/linux-media/20251114101418.2548-1-vulab@iscas.ac.cn/
Closes: https://lore.kernel.org/linux-media/20251114101346.2530-1-vulab@iscas.ac.cn/
Closes: https://lore.kernel.org/linux-media/20251114090605.2413-1-vulab@iscas.ac.cn/
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The wrong firmware file is listed, leading to non functional devices
on REV2 models.
Signed-off-by: Bradford Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add checks for ioremap return values in saa7164_dev_setup(). If
ioremap for BAR0 or BAR2 fails, release the already allocated PCI
memory regions, remove the device from the global list, decrement
the device count, and return -ENODEV.
This prevents potential null pointer dereferences and ensures proper
cleanup on memory mapping failures.
Fixes: 443c1228d5 ("V4L/DVB (12923): SAA7164: Add support for the NXP SAA7164 silicon")
Cc: stable@vger.kernel.org
Signed-off-by: Wang Jun <1742789905@qq.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The memory allocated for codec in videocodec_attach() is not freed in
one of the error paths, due to an incorrect goto label. Fix the label
to free it on error.
Fixes: 8f7cc5c0b0 ("media: staging: media: zoran: introduce zoran_i2c_init")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Ahead of introducing I2C-adapter-specific printk() helpers, preemptively
avoid a conflict with the upcoming i2c_dbg() and rename the local macro
in the saa7134 driver to saa7134_i2c_dbg().
Suggested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Acked-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
media: cx25821-alsa: replace BUG_ON() with WARN_ON()
Avoid crashing the kernel for a recoverable condition
by replacing BUG_ON() with WARN_ON().
Signed-off-by: Atharv Dubey <atharvd440@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add zDML (a special signal mapping as used in Audi Digital Matrix Lights)
color mapping support. In addition to extending the already existing color
mapping property of the inputs, the same property is added for the outputs
that must be configured in the same way as the inputs.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The "magic" temperature formula must be computed using a signed integer for
negative temperatures to work properly.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add the Omnivision OV5675 (ACPI HID OVTI5675) to the
ipu_supported_sensors[] table with a link frequency of 450 MHz.
This sensor is found in the Lenovo ThinkPad X1 Fold 16 Gen 1 behind
an Intel Vision Sensing Controller (IVSC). Without this entry the IPU
bridge does not create the software-node fwnode graph for the sensor,
preventing the camera from being enumerated.
Signed-off-by: Leif Skunberg <diamondback@cohunt.app>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Dell XPS 13 9340 and XPS 14 9440 have an upside-down mounted OV02C10
sensor, just like the XPS 13 9350 and XPS 16 9640 models.
Extend the existing DMI matches for handling these laptops with DMI
matches for these 2 models
Reported-by: Heimir Thor Sverrisson <heimir.sverrisson@gmail.com> # XPS 14 9440
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2440581 # XPS 13 9340
Fixes: d5ebe3f7d1 ("media: ov02c10: Fix default vertical flip")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In a error path isp->psys is confirmed to be an error pointer not NULL so
this condition is true and the error pointer is dereferenced. So isp-psys
should be set to NULL before going to out_ipu6_bus_del_devices.
Detected by Smatch:
drivers/media/pci/intel/ipu6/ipu6.c:690 ipu6_pci_probe() error:
'isp->psys' dereferencing possible ERR_PTR()
Fixes: 25fedc0219 ("media: intel/ipu6: add Intel IPU6 PCI device driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
[Sakari Ailus: Fix commit message.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
-----BEGIN PGP SIGNATURE-----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=oFw9
-----END PGP SIGNATURE-----
Merge tag 'media/v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Add support for GMSL1 and GMSL‑coax modules (PCI mgb4)
- Add driver for TI VIP
- AV1 – first kernel support (pixel‑format, decoder, transcoder)
- Three new camera‑sensor drivers (os05b10, s5k3m5, s5kjn1)
- Synopsys CSI‑2 receiver driver
- Verisilicon & rkvdec – major fixes and enhancements
- IPU6 (and 7) fixes and preparation for metadata
- omap3isp: v4l2-compliance updates
- Fix DVB streaming, drop wait_prepare/finish (dvb/vb2)
* tag 'media/v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (307 commits)
media: uvcvideo: Pass allocation size directly to uvc_alloc_urb_buffer
media: uvcvideo: Fix allocation for small frame sizes
media: uvcvideo: Return queued buffers on start_streaming() failure
media: uvcvideo: Create an ID namespace for streaming output terminals
media: rkvdec: Add HEVC support for the VDPU383 variant
media: rkvdec: Add HEVC support for the VDPU381 variant
media: rkvdec: Add H264 support for the VDPU383 variant
media: rkvdec: Add H264 support for the VDPU381 variant
media: rkvdec: Disable multicore support
media: rkvdec: Enable all clocks without naming them
media: rkvdec: Support per-variant interrupt handler
media: rkvdec: Add RCB and SRAM support
media: rkvdec: Add variant specific coded formats list
media: rkvdec: Move hevc functions to common file
media: rkvdec: Move h264 functions to common file
media: rkvdec: Use structs to represent the HW RPS
media: rkvdec: Move cabac tables to their own source file
media: rkvdec: Switch to using structs instead of writel
media: visl: Add HEVC short and long term RPS sets
media: v4l2-ctrls: Add hevc_ext_sps_[ls]t_rps controls
...
The interrupt handler iio_trigger_generic_data_rdy_poll() will invoke other
interrupt handlers and this supposed to happen from hard interrupt context.
Use IRQF_NO_THREAD to forbid forced-threading.
Fixes: 0ab13674a9 ("media: pci: mgb4: Added Digiteq Automotive MGB4 driver")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128095540.863589-21-bigeasy@linutronix.de
Add support for GMSL3 modules with a coaxial interface, a variant of the
already existing module with the id #4. The FW is the same as for all other
GMSL3 modules.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add support for GMSL1 modules. GMSL1 modules have 2 inputs, 2 outputs and
require a separate FW (id #3).
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Remove Hongju's e-mail address that no longer works.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Even if a video device is part of a pipeline already,
video_device_pipeline_alloc_start() handles that case gracefully. Don't
explicitly differentiate between video_device_pipeline_start() and
video_device_pipeline_alloc_start() based on the existence of a pipeline.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Drop the custom functions that are used to obtain information from the
sub-device state.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Remove source_entity from struct ipu6_isys_stream and instead pass it on
in function arguments.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Obtain unique source pad from a remote sub-device, instead of the first
one. This means that only one link may be active at stream start. There's
no functional change in practice, unless multiple CSI-2 transmitters are
directly connected to the receiver.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
There's no reason to use media_entity_remote_source_pad_unique() as we
know our pads. Use media_pad_remote_pad_unique() instead.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
error argument for ipu6_isys_stream_start() is always false, remove the
argument. The IPU6_ISYS_BUFFER_LIST_FL_SET_STATE buffer flag also becomes
redundant as a result, remove it as well.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Close the firmware stream even when disabling a stream on an upstream
sub-device fails. This allows the firmware to release resources related to
a stream that is stopped in any case.
Suggested-by: Bingbu Cao <bingbu.cao@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
When enabling streaming fails, the stream is stopped in firmware but not
closed. Do this to release resources on firmware side.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
A pipeline exists when start_streaming has returned so the check for
start_streaming_called is equivalent to having media_pipeline. Use
vb2_start_streaming_called() to perform the check.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The videobuf2 framework will ensure buffers are queued before streaming is
started. Remove support for starting streaming via the buf_queue()
callback.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Make isys_setup_hw and isys_isr static as they're only used in a single
file.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Both runtime PM resume and suspend callbacks check whether the driver's
data is set for the device. This is done in probe(); drop the redundant
checks.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The MMU hardware is initialised and cleaned up in the runtime PM resume
callbacks. Do not do this in probe().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The ipu6 isys driver maintains the list of video buffer queues related to
a stream (in ipu6 context streams on the same CSI-2 virtual channel) and
this list is modified through VIDIOC_STREAMON and VIDIOC_STREAMOFF IOCTLs.
Ensure the common mutex is acquired when accessing the linked list, i.e.
the isys device context's stream_mutex.
Add a lockdep assert to ipu6_isys_get_buffer_list() and switch to guard()
while at it as the error handling becomes more simple this way.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Several error paths in ipu6_pci_probe() were jumping directly to
out_ipu6_bus_del_devices without releasing the runtime PM reference.
Add pm_runtime_put_sync() before cleaning up other resources.
Cc: Stable@vger.kernel.org
Fixes: 25fedc0219 ("media: intel/ipu6: add Intel IPU6 PCI device driver")
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fix two coding errors in ipu6-mmu.c:
1. Fix syntax error in page_table_dump() where the closing parenthesis
and semicolon were swapped in the TBL_PHYS_ADDR macro call.
2. Fix incorrect loop bound in alloc_l2_pt(). When initializing L2 page
table entries, the loop was incorrectly using ISP_L1PT_PTES instead
of ISP_L2PT_PTES.
Fixes: 9163d83573 ("media: intel/ipu6: add IPU6 DMA mapping API and MMU table")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add release_mem_region() if ioremap() fails to release the memory
region obtained by cx25821_get_resources().
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Clang with CONFIG_UBSAN_SHIFT=y noticed a condition where a signed type
(literal "1" is an "int") could end up being shifted beyond 32 bits,
so instrumentation was added (and due to the double is_tw286x() call
seen via inlining), Clang decides the second one must now be undefined
behavior and elides the rest of the function[1]. This is a known problem
with Clang (that is still being worked on), but we can avoid the entire
problem by actually checking the existing max chip ID, and now there is
no runtime instrumentation added at all since everything is known to be
within bounds.
Additionally use an unsigned value for the shift to remove the
instrumentation even without the explicit bounds checking.
Link: https://github.com/ClangBuiltLinux/linux/issues/2144 [1]
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: fix checkpatch warning for is_tw286x]
