Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260515164848.497608-2-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The current implementation sends a separate power-down command
after reading the Z2 value, resulting in an extra I2C
transaction per measurement cycle.
The TSC2007 command byte contains a 2-bit power-down mode
selection field. By selecting the power-down state in the Z2
measurement command, the device powers down after the Z2 A/D
conversion completes, eliminating the subsequent power-down
transaction.
This reduces the number of I2C transactions by one per touch
measurement cycle, decreasing I2C bus overhead and improving
touch sampling performance.
Signed-off-by: Yuki Horii <yuuki198708@gmail.com>
Tested-by: Andreas Kemnade <andreas@kemnade.info> # GTA04
Link: https://patch.msgid.link/20260410074100.1660-1-horiiyuk@ishida.co.jp
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The touch resistance calculation in the tsc2007 driver is prone to
overflow if (z2 - z1) is large and also x is reasonably big. This
overflow results in the driver emitting input events when very little
touch pressure is applied. In these events the x and y coordinates can
be substantially off.
Avoid the overflow by using u64 when calculating resistance value.
Signed-off-by: Johannes Kirchmair <johannes.kirchmair@skidata.com>
Link: https://lore.kernel.org/r/20250129-fix_tsc_calculation_overflow-v2-1-9e51333496ad@skidata.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In case tsc2007 is used as an ADC sensor there will be no interrupt
provided at all, so set up an interrupt only if one is present.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250824091927.105121-3-clamor95@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Since pen GPIO request is optional, there is no reason to throw dev_warn if
such GPIO is not defined.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250824091927.105121-2-clamor95@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Only some driver-specific properties were accepted, change it
to use the now-available standard properties which are
found in devicetrees containing this chip.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20241205204413.2466775-2-akemnade@kernel.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
While add it, also remove commas after the sentinel entries.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240509174158.2211071-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230517164645.162294-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When a hard IRQ is triggered, the soft IRQ, which decides if an actual
pen down happened, should always be triggered. This enables the usage of
"can_sleep" GPIO chips as "pen down" GPIO, as the value is not read
during the hard IRQ anymore. This might be the case if the GPIO chip is
an expander behind i2c.
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Link: https://lore.kernel.org/r/20230328-tsc2007-sleep-v5-1-fc55e76d0ced@skidata.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-264-uwe@kleine-koenig.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Device property API allows to gather device resources from different sources,
such as ACPI. Convert the drivers to unleash the power of device property API.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210314210951.645783-2-andy.shevchenko@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This converts the driver to use GPIO descriptors.
Note that it now uses logical polarity and thus nagation has been dropped.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210314210951.645783-1-andy.shevchenko@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Previously, tsc2007 would report as ABS_PRESSURE:
0 for no pressure (resistance infinite)
high value for soft pressure (high resistance)
low value for firm pressure (lower resistance)
This does not matter for most applications (e.g. GUI, Menu, Scrolling etc.)
where the ABS_PRESSURE is ignored and only BTN_TOUCH is processed to detect
screen taps.
Only some special graphics applications read the pressure channel and they
will be mixed up by this non-monotonic relation.
So we fix it to become:
0 for no pressure (resistance infinite)
low value for soft pressure (high resistance)
high value for firm pressure (lower resistance)
While this patch changes the values reported to userspace, ABS_PRESSURE is
used rarely by userspace. Most software only relies on BTN_TOUCH (boolean),
which is not affected by this patch. Some graphics software makes use of
the interface and does not work correctly with the currently used inverted
behaviour.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Rename tsc2007_calculate_pressure to tsc2007_calculate_resistance because
that is what it does.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The tsc2007 chip not only has a resistive touch screen controller but
also an external AUX adc imput which can be used for an ambient
light sensor, battery voltage monitoring or any general purpose.
Additionally it can measure the chip temperature.
This extension provides an iio interface for these adc channels.
Since it is not wasting much resources and is very straightforward,
we simply provide all other adc channels as optional iio interfaces
as weel. This can be used for debugging or special applications.
This patch also splits the tsc2007 driver in several source files:
tsc2007.h -- constants, structs and stubs
tsc2007_core.c -- functional parts of the original driver
tsc2007_iio.c -- the optional iio stuff
Makefile magic allows to conditionally link the iio stuff
if CONFIG_IIO=y or =m in a way that it works with
CONFIG_TOUCHSCREEN_TSC2007=m.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
