mt_io_flags is a single unsigned long, but mt_process_slot(),
mt_release_pending_palms() and mt_release_contacts() use it as a
per-slot bitmap indexed by the slot number. That slot number is only
bounded by td->maxcontacts, which is taken from the device's
ContactCountMaximum feature report and can be up to 255, not by
BITS_PER_LONG.
As a result, a multitouch device that advertises a large contact count
makes set_bit()/clear_bit() operate past the mt_io_flags word and
corrupt the adjacent members of struct mt_device. The sticky-fingers
release timer is the easiest way to reach this. mt_release_contacts()
runs
for (i = 0; i < mt->num_slots; i++)
clear_bit(i, &td->mt_io_flags);
with num_slots == maxcontacts. For maxcontacts around 250 the loop
clears the bits that overlap td->applications.next, zeroing that list
head, and the list_for_each_entry() that immediately follows then
dereferences NULL. The kernel panics from timer (softirq) context. On a
KASAN build this shows up as a general protection fault in
mt_release_contacts() with a null-ptr-deref at offset 0x58, which is
offsetof(struct mt_application, num_received).
The state is reachable from an untrusted USB or Bluetooth HID
multitouch device; no local privileges are required.
Store the per-slot active state in a separately allocated bitmap sized
for maxcontacts, the same pattern already used for pending_palm_slots,
and keep only MT_IO_FLAGS_RUNNING in mt_io_flags. The two
"mt_io_flags & MT_IO_SLOTS_MASK" arming checks become
bitmap_empty(td->active_slots, td->maxcontacts).
Move MT_IO_FLAGS_RUNNING back to bit 0. It was bumped to bit 32 by the
same commit to leave the low byte for the slot bits; with the slot bits
gone it fits in bit 0 again, which also keeps it within the unsigned
long on 32-bit.
Fixes: 46f781e0d1 ("HID: multitouch: fix sticky fingers")
Cc: stable@vger.kernel.org
Signed-off-by: Trung Nguyen <trungnh@cystack.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
The INGENIC 17EF:6161 firmware on the Lenovo Yoga Book 9 14IAH10
does not clear stale contact slots when fingers are lifted. Each
HID report contains up to 10 finger slots, but only the first
ContactCount slots represent valid contacts; the remaining slots
retain TipSwitch=1 with positions from previous touches.
Raw HID capture confirms this: across a 60-second capture with
repeated multi-finger gestures, 90% of frames had more TipSwitch=1
slots than the reported ContactCount. The ContactCount field itself
is always accurate.
Add MT_QUIRK_CONTACT_CNT_ACCURATE to the MT_CLS_YOGABOOK9I class so
the driver stops processing slots once ContactCount valid contacts
have been consumed, discarding the stale ghost entries per HID
specification section 17. MT_QUIRK_NOT_SEEN_MEANS_UP (already in
the class) ensures that any slot skipped by this guard is released
via INPUT_MT_DROP_UNUSED at frame sync.
Signed-off-by: Dave Carey <carvsdriver@gmail.com>
Tested-by: Dave Carey <carvsdriver@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
commit 0a3fe972a7 ("HID: core: Mitigate potential OOB by removing
bogus memset()") enforced the provided data to be at least the size of
the declared buffer in the report descriptor to prevent a buffer
overflow. However, we can try to be smarter by providing both the buffer
size and the data size, meaning that hid_report_raw_event() can make
better decision whether we should plaining reject the buffer (buffer
overflow attempt) or if we can safely memset it to 0 and pass it to the
rest of the stack.
Fixes: 0a3fe972a7 ("HID: core: Mitigate potential OOB by removing bogus memset()")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Lenovo Yoga Book 9 14IAH10 (83KJ) (17EF:6161) firmware includes a
HID_DG_TOUCHPAD application collection designed for the Windows inbox HID
driver's Win8 PTP touchpad mode. On Linux the HID_DG_TOUCHSCREEN
collections provide the correct direct-touch interface. The presence of
the touchpad collection causes hid-multitouch to misclassify the
touchscreen nodes as indirect buttonpads, leaving them non-functional.
Within the touchpad collection:
- HID_UP_BUTTON usages trigger the touchscreen-with-buttons heuristic
that sets INPUT_MT_POINTER on the touchscreen applications.
- The HID_DG_TOUCHPAD application itself sets INPUT_MT_POINTER via
mt_allocate_application(), propagating to all touchscreen nodes.
- A HID_DG_BUTTONTYPE feature (report 0x51) returns MT_BUTTONTYPE_CLICKPAD,
setting td->is_buttonpad = true for the entire device.
Additionally, the firmware resets if any USB control request arrives while
the CDC-ACM interface is initialising (~1.18 s after enumeration).
The Win8 compliance blob (0xff00:0xc5) and Contact Count Max feature
reports in the touchscreen collections trigger GET_REPORT calls at probe
that hit this window. Surface Switch (0x57) and Button Switch (0x58)
feature reports are sent by mt_set_modes() on every input-device open and
close, repeatedly hitting this window throughout device lifetime.
The firmware also leaves a persistent ghost contact in its contact buffer
(contact ID 2, fixed coordinates, tip always asserted) on every enumeration.
This ghost occupies a multitouch slot and prevents KWin from seeing a clean
finger-lift, causing stuck touch state. The ghost is cleared when Input
Mode is set via HID_REQ_SET_REPORT at probe.
Fix using a report descriptor fixup in mt_report_fixup() and a class
definition update:
1. Remove the entire HID_DG_TOUCHPAD application collection. Parsing
HID short items from its header to the matching End Collection and
closing the gap with memmove eliminates all three BUTTONPAD
heuristics and the feature reports within the collection.
2. Neutralize the Win8 compliance blob feature reports remaining in the
touchscreen collections by changing Usage Page 0xff00 to 0x0f00,
preventing the case 0xff0000c5 branch in mt_feature_mapping() from
issuing GET_REPORT.
3. Neutralize the Contact Count Max feature reports by changing usage
0x55 to 0x00; set maxcontacts = 10 in the class definition so the
driver uses the correct contact limit without querying the device.
4. Neutralize Surface Switch (0x57) and Button Switch (0x58) feature
report usages in the Device Configuration collection so mt_set_modes()
does not issue HID_REQ_SET_REPORT for these on every input-device
open/close. Input Mode (0x52) is intentionally left intact: the single
HID_REQ_SET_REPORT at probe flushes the firmware's contact buffer and
clears the persistent ghost contact. By probe time the cdc-acm driver
has already satisfied the CDC-ACM init watchdog (~130 ms), so this
request arrives safely after the reset window has closed.
5. Add MT_QUIRK_NOT_SEEN_MEANS_UP to the MT_CLS_YOGABOOK9I class so that
contacts not present in a frame are released via INPUT_MT_DROP_UNUSED,
preventing stale multitouch slots from lingering if the firmware omits
a contact from a report.
Signed-off-by: Dave Carey <carvsdriver@gmail.com>
Tested-by: Dave Carey <carvsdriver@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
It is possible for a malicious (or clumsy) device to respond to a
specific report's feature request using a completely different report
ID. This can cause confusion in the HID core resulting in nasty
side-effects such as OOB writes.
Add a check to ensure that the report ID in the response, matches the
one that was requested. If it doesn't, omit reporting the raw event and
return early.
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Uniwill devices have a built in gesture in the touchpad to de- and
reactivate it by double taping the upper left corner. This gesture stops
working when latency is set to high, so this patch keeps the latency on
normal.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
[jkosina@suse.com: change bit from 24 to 25]
[jkosina@suse.com: update shortlog]
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add support for the for the EXC3188 touchscreen from eGalaxy.
Signed-off-by: Thorsten Schmelzer <tschmelzer@topcon.com>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Lenovo Yoga Book 9i is a dual-screen laptop, with a single composite
USB device providing both touch and tablet interfaces for both screens.
All inputs report through a single device, differentiated solely by report
numbers. As there is no way for udev to differentiate the inputs based on
USB vendor/product ID or interface numbers, custom naming is required to
match against for downstream configuration. A firmware bug also results
in an erroneous InRange message report being received after the stylus
leaves proximity, blocking later touch events. Add required quirks for
Gen 8 to Gen 10 models, including a new quirk providing for custom input
device naming and dropping erroneous InRange reports.
Signed-off-by: Brian Howard <blhoward2@gmail.com>
Tested-by: Brian Howard <blhoward2@gmail.com>
Tested-by: Kris Fredrick <linux.baguette800@slmail.me>
Reported-by: Andrei Shumailov <gentoo1993@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220386
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Some VTL-class touchpads (e.g. TOPS0102:00 35CC:0104) intermittently
fail to release a finger contact. A previous slot remains logically
active, accompanied by stale BTN_TOOL_DOUBLETAP state, causing
gestures to stay latched and resulting in stuck two-finger
scrolling and false right-clicks.
Apply MT_QUIRK_STICKY_FINGERS to handle the unreleased contact correctly.
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/1225
Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: DaytonCL <artem749507@gmail.com>
Signed-off-by: DaytonCL <artem749507@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
The sticky fingers quirk (MT_QUIRK_STICKY_FINGERS) was only considering
the case when slots were not released during the last report.
This can be problematic if the firmware forgets to release a finger
while others are still present.
This was observed on the Synaptics DLL0945 touchpad found on the Dell
XPS 9310 and the Dell Inspiron 5406.
Fixes: 4f4001bc76 ("HID: multitouch: fix rare Win 8 cases when the touch up event gets missing")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
HID_DG_PEN devices should have a suffix of "Stylus", as pointed out by
commit c0ee1d5716 ("HID: hid-input: Add suffix also for HID_DG_PEN").
However, on multitouch devices, these suffixes may be overridden. Before
that commit, HID_DG_PEN devices would get the "Stylus" suffix, but after
that, multitouch would override them to have an "UNKNOWN" suffix. Just add
HID_DG_PEN to the list of non-overriden suffixes in multitouch.
Before this fix:
[ 0.470981] input: ELAN9008:00 04F3:2E14 UNKNOWN as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-16/i2c-ELAN9008:00/0018:04F3:2E14.0001/input/input8
ELAN9008:00 04F3:2E14 UNKNOWN
After this fix:
[ 0.474332] input: ELAN9008:00 04F3:2E14 Stylus as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-16/i2c-ELAN9008:00/0018:04F3:2E14.0001/input/input8
ELAN9008:00 04F3:2E14 Stylus
Fixes: c0ee1d5716 ("HID: hid-input: Add suffix also for HID_DG_PEN")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
If CONFIG_HID_HAPTIC is enabled, and the device is recognized to have
simple haptic capabilities, try initializing the haptic device, check
input frames for pressure and handle it using hid_haptic_* API.
Signed-off-by: Angela Czubak <aczubak@google.com>
Co-developed-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
A malicious HID device can trigger a slab out-of-bounds during
mt_report_fixup() by passing in report descriptor smaller than
607 bytes. mt_report_fixup() attempts to patch byte offset 607
of the descriptor with 0x25 by first checking if byte offset
607 is 0x15 however it lacks bounds checks to verify if the
descriptor is big enough before conducting this check. Fix
this bug by ensuring the descriptor size is at least 608
bytes before accessing it.
Below is the KASAN splat after the out of bounds access happens:
[ 13.671954] ==================================================================
[ 13.672667] BUG: KASAN: slab-out-of-bounds in mt_report_fixup+0x103/0x110
[ 13.673297] Read of size 1 at addr ffff888103df39df by task kworker/0:1/10
[ 13.673297]
[ 13.673297] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0-00005-gec5d573d83f4-dirty #3
[ 13.673297] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/04
[ 13.673297] Call Trace:
[ 13.673297] <TASK>
[ 13.673297] dump_stack_lvl+0x5f/0x80
[ 13.673297] print_report+0xd1/0x660
[ 13.673297] kasan_report+0xe5/0x120
[ 13.673297] __asan_report_load1_noabort+0x18/0x20
[ 13.673297] mt_report_fixup+0x103/0x110
[ 13.673297] hid_open_report+0x1ef/0x810
[ 13.673297] mt_probe+0x422/0x960
[ 13.673297] hid_device_probe+0x2e2/0x6f0
[ 13.673297] really_probe+0x1c6/0x6b0
[ 13.673297] __driver_probe_device+0x24f/0x310
[ 13.673297] driver_probe_device+0x4e/0x220
[ 13.673297] __device_attach_driver+0x169/0x320
[ 13.673297] bus_for_each_drv+0x11d/0x1b0
[ 13.673297] __device_attach+0x1b8/0x3e0
[ 13.673297] device_initial_probe+0x12/0x20
[ 13.673297] bus_probe_device+0x13d/0x180
[ 13.673297] device_add+0xe3a/0x1670
[ 13.673297] hid_add_device+0x31d/0xa40
[...]
Fixes: c8000deb68 ("HID: multitouch: Add support for GT7868Q")
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add "Thinkpad X1 Tablet Gen 2 Keyboard" PID to hid-lenovo driver to fix trackpoint not working issue.
Signed-off-by: Akira Inoue <niyarium@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch adds the device ID of Apple Touch Bar found on x86 MacBook Pros
to the hid-multitouch driver.
Note that this is device ID is for T2 Macs. Testing on T1 Macs would be
appreciated.
Signed-off-by: Kerem Karabay <kekrby@gmail.com>
Co-developed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Currently the driver determines the device type based on the
application, but this value is not reliable on Apple Touch Bar, where
the application is HID_DG_TOUCHPAD even though this device is direct,
so add a quirk for the same.
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Kerem Karabay <kekrby@gmail.com>
Co-developed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
In Apple Touch Bar, the HID_DG_CONTACTMAX is not present, but the maximum
contact count is still greater than the default. Add quirks for the same.
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Kerem Karabay <kekrby@gmail.com>
Co-developed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
In Apple Touch Bar, the tip state is contained in fields with the
HID_DG_TOUCH usage. This feature is gated by a quirk in order to
prevent breaking other devices, see commit c2ef8f21ea
("HID: multitouch: add support for trackpads").
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Kerem Karabay <kekrby@gmail.com>
Co-developed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
In Apple Touch Bar, the contact ID is contained in fields with the
HID_DG_TRANSDUCER_INDEX usage rather than HID_DG_CONTACTID, thus differing
from the HID spec. Add a quirk for the same.
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Kerem Karabay <kekrby@gmail.com>
Co-developed-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
-----BEGIN PGP SIGNATURE-----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=qI/U
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2025060301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- support for Apple Magic Mouse 2 USB-C (Aditya Garg)
- power management improvement for multitouch devices (Werner Sembach)
- fix for ACPI initialization in intel-thc driver (Wentao Guan)
- adaptation of HID drivers to use new gpio_chip's line setter
callbacks (Bartosz Golaszewski)
- fix potential OOB in usbhid_parse() (Terry Junge)
- make it possible to set hid_mouse_ignore_list dynamically (the same
way we handle other quirks) (Aditya Garg)
- other small assorted fixes and device ID additions
* tag 'hid-for-linus-2025060301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: multitouch: Disable touchpad on firmware level while not in use
HID: core: Add functions for HID drivers to react on first open and last close call
HID: HID_APPLETB_BL should depend on X86
HID: HID_APPLETB_KBD should depend on X86
HID: appletb-kbd: Use secs_to_jiffies() instead of msecs_to_jiffies()
HID: intel-thc-hid: intel-thc: make read-only arrays static const
HID: magicmouse: Apple Magic Mouse 2 USB-C support
HID: mcp2221: use new line value setter callbacks
HID: mcp2200: use new line value setter callbacks
HID: cp2112: use new line value setter callbacks
HID: cp2112: use lock guards
HID: cp2112: hold the lock for the entire direction_output() call
HID: cp2112: destroy mutex on driver detach
HID: intel-thc-hid: intel-quicki2c: pass correct arguments to acpi_evaluate_object
HID: corsair-void: Use to_delayed_work()
HID: hid-logitech: use sysfs_emit_at() instead of scnprintf()
HID: quirks: Add HID_QUIRK_IGNORE_MOUSE quirk
HID: usbhid: Eliminate recurrent out-of-bounds bug in usbhid_parse()
HID: Kysona: Add periodic online check
Using the new on_hid_hw_open and on_hid_hw_close functions to disable the
touchpad on firmware level while not being in use.
This safes some battery and triggers touchpad-disabled-leds hardwired to
the touchpads firmware, that exist for example on some TongFang barebones.
For a lengthy discussion with all the details see
https://gitlab.freedesktop.org/libinput/libinput/-/issues/558
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20250211133950.422232-2-wse@tuxedocomputers.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in mt_input_configured() is not checked.
Add NULL check in mt_input_configured(), to handle kernel NULL
pointer dereference error.
Fixes: 4794394635 ("HID: multitouch: Correct devm device reference for hidinput input_dev name")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This device sometimes doesn't send touch release signals when moving
from >=2 fingers to <2 fingers. Using MT_QUIRK_NOT_SEEN_MEANS_UP instead
of MT_QUIRK_ALWAYS_VALID makes sure that no touches become stuck.
Signed-off-by: Enze Xie <enze@nfschina.com>
Signed-off-by: Youwan Wang <youwan@nfschina.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Commit c8000deb68 ("HID: multitouch: Add support for GT7868Q") added
support for 0x01e8 and 0x01e9, but the mt_device[] entries were added
twice for 0x01e8 and there was none added for 0x01e9. Fix that.
Fixes: c8000deb68 ("HID: multitouch: Add support for GT7868Q")
Reported-by: He Lugang <helugang@uniontech.com>
Reported-by: WangYuli <wangyuli@uniontech.com>
Reported-by: Ulrich Müller <ulm@gentoo.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This reverts commit 251efae73b.
Quoting Wang Yuli:
"The 27C6:01E0 touchpad doesn't require the workaround and applying it
would actually break functionality.
The initial report came from a BBS forum, but we suspect the
information provided by the forum user may be incorrect which could
happen sometimes. [1]
Further investigation showed that the Lenovo Y9000P 2024 doesn't even
use a Goodix touchpad. [2]
For the broader issue of 27c6:01e0 being unusable on some devices, it
just need to address it with a libinput quirk.
In conclusion, we should revert this commit, which is the best
solution."
Reported-by: Ulrich Müller <ulm@gentoo.org>
Reported-by: WangYuli <wangyuli@uniontech.com>
Link: https://lore.kernel.org/all/uikt4wwpw@gentoo.org/
Signed-off-by: Jiri Kosina <jkosina@suse.com>
mt_set_mode() accepts 2 boolean switches indicating whether the device
(if it follows Windows Precision Touchpad specification) should report
hardware buttons and/or surface contacts. For a casual reader it is
completely not clear, as they look at the call site, which exact mode
is being requested.
Define report_mode enum and change mt_set_mode() to accept is as
an argument instead. This allows to write:
mt_set_modes(hdev, HID_LATENCY_NORMAL, TOUCHPAD_REPORT_ALL);
or
mt_set_modes(hdev, HID_LATENCY_HIGH, TOUCHPAD_REPORT_BUTTONS);
which makes intent much more clear.
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/Zx_hBvg5Qa3KU3ta@google.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
The Logitech Casa Touchpad does not reliably send touch release signals
when communicating through the Logitech Bolt wireless-to-USB receiver.
Adjusting the device class to add MT_QUIRK_NOT_SEEN_MEANS_UP to make
sure that no touches become stuck, MT_QUIRK_FORCE_MULTI_INPUT is not
needed, but harmless.
Linux does not have information on which devices are connected to the
Bolt receiver, so we have to enable this for the entire device.
Signed-off-by: Kenneth Albanowski <kenalba@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The behavior of HONOR MagicBook Art 14 touchpad is not consistent
after reboots, as sometimes it reports itself as a touchpad, and
sometimes as a mouse.
Similarly to GLO-GXXX it is possible to call MT_QUIRK_FORCE_GET_FEATURE as a
workaround to force set feature in mt_set_input_mode() for such special touchpad
device.
[jkosina@suse.com: reword changelog a little bit]
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/1040
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
By default the track point does not work on the Asus Expertbook B2402FVA.
From libinput record i got the ID of the track point device:
evdev:
# Name: ASUE1201:00 04F3:32AE
# ID: bus 0x18 vendor 0x4f3 product 0x32ae version 0x100
I found that the track point is functional, when i set the
MT_CLS_WIN_8_FORCE_MULTI_INPUT_NSMU class for the reported device.
Signed-off-by: Stefan Blum <stefan.blum@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This applies similar quirks used by previous generation device, so that
Trackpoint and buttons on the touchpad works. New USB KBD PID 0x61AE for
Thinkpad X12 Tab is added.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The patch is to add proper quirks for sis multitouch format
Signed-off-by: tammy tseng <tammy0524@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The 2024 Lenovo Y9000P which use GT7868Q chip also needs a fixup.
The information of the chip is as follows:
I2C HID v1.00 Mouse [GXTP5100:00 27C6:01E0]
Signed-off-by: He Lugang <helugang@uniontech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
By allowing the drivers to return a "const *" they can constify their
static report arrays.
This makes it clear to driver authors that the HID core will not modify
those reports and they can be reused for multiple devices.
Furthermore security is slightly improved as those reports are protected
against accidental or malicious modifications.
[bentiss: fixup hid-cougar.c and hid-multitouch.c for latest version of
the master branch]
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240803-hid-const-fixup-v2-6-f53d7a7b29d8@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
GT7868Q has incorrect data in the report and needs a fixup.
The change enables haptic touchpad on Lenovo ThinkBook 13x Gen 4
and has been tested on the device.
Signed-off-by: Dmitry Savin <envelsavinds@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This device sometimes doesn't send touch release signals when moving
from >=4 fingers to <4 fingers. Using MT_QUIRK_NOT_SEEN_MEANS_UP instead
of MT_QUIRK_ALWAYS_VALID makes sure that no touches become stuck.
MT_QUIRK_FORCE_MULTI_INPUT is not necessary for this device, but does no
harm.
Signed-off-by: Sean O'Brien <seobrien@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
dev_time was moved to struct mt_application in commit f146d1c4d7 (HID:
multitouch: Store per collection multitouch data), but is not used since
then. Remove it.
Found by https://github.com/jirislaby/clang-struct.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add support for the pointing stick (Accupoint) and 2 mouse buttons.
Present on some Toshiba/dynabook Portege X30 and X40 laptops.
It should close https://bugzilla.kernel.org/show_bug.cgi?id=205817
Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Honor MagicBook 13 2023 has a touchpad which do not switch to the multitouch
mode until the input mode feature is written by the host. The touchpad do
report the input mode at touchpad(3), while itself working under mouse mode. As
a workaround, it is possible to call MT_QUIRE_FORCE_GET_FEATURE to force set
feature in mt_set_input_mode for such device.
The touchpad reports as BLTP7853, which cannot retrive any useful manufacture
information on the internel by this string at present. As the serial number of
the laptop is GLO-G52, while DMI info reports the laptop serial number as
GLO-GXXX, this workaround should applied to all models which has the GLO-GXXX.
Signed-off-by: Aoba K <nexp_0x17@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Through the usage of pm_ptr() the CONFIG_PM-dependent code will always be
compiled, protecting against bitrot.
The linker will then garbage-collect the unused function avoiding any overhead.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20231012-hid-pm_ptr-v1-3-0a71531ca93b@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Register the Synaptics device as a special multitouch device with certain
quirks that may improve usability of the touchpad device.
Reported-by: Rain <rain@sunshowers.io>
Closes: https://lore.kernel.org/linux-input/2bbb8e1d-1793-4df1-810f-cb0137341ff4@app.fastmail.com/
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Reference the HID device rather than the input device for the devm
allocation of the input_dev name. Referencing the input_dev would lead to a
use-after-free when the input_dev was unregistered and subsequently fires a
uevent that depends on the name. At the point of firing the uevent, the
name would be freed by devres management.
Use devm_kasprintf to simplify the logic for allocating memory and
formatting the input_dev name string.
Reported-by: Maxime Ripard <mripard@kernel.org>
Closes: https://lore.kernel.org/linux-input/ZOZIZCND+L0P1wJc@penguin/T/#m443f3dce92520f74b6cf6ffa8653f9c92643d4ae
Fixes: c08d46aa80 ("HID: multitouch: devm conversion")
Suggested-by: Maxime Ripard <mripard@kernel.org>
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230824061308.222021-3-sergeantsagara@protonmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
