There are a few added drivers, but mostly the normal maintenance to drivers
for firmware, memory controller and other soc specific hadware:
- The NXP QuickEngine gets modern MSI support, which allows some cleanups to
the GICv3 irqchip chip driver
- A new SoC specific driver for the Renesas R-Car MFIS unit is added,
encapsulating support for the on-chip mailbox and hwspinlock
implementations that are not easily separated into individual
drivers
- The Qualcomm SoC drivers add support for additional SoC implementations,
and flexiblity around power managedment for the serial-engine driver
as well as probing the LLCC driver using custom hardware descriptions
inside of the device itself.
- Added support for the Samsung thermal management unit
- A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
APIs and allow multiple PMC instances everywhere.
- Updates to the TI SCI and KNAS drivers to improve suspend/resume
support.
- Minor driver changes for mediatek, xilinx, allwinner, aspeed, tegra,
broadcom, amd, microchip and starfive specific drivers
- Memory controller updates for Tegra and Renesas for additional SoC
types and other improvements.
- Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces,
to update driver probing, object lifetimes and address minor bugs.
-----BEGIN PGP SIGNATURE-----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=27+M
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"There are a few added drivers, but mostly the normal maintenance to
drivers for firmware, memory controller and other soc specific
hardware:
- The NXP QuickEngine gets modern MSI support, which allows some
cleanups to the GICv3 irqchip chip driver
- A new SoC specific driver for the Renesas R-Car MFIS unit is added,
encapsulating support for the on-chip mailbox and hwspinlock
implementations that are not easily separated into individual
drivers
- The Qualcomm SoC drivers add support for additional SoC
implementations, and flexibility around power management for the
serial-engine driver as well as probing the LLCC driver using
custom hardware descriptions inside of the device itself.
- Added support for the Samsung thermal management unit
- A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
APIs and allow multiple PMC instances everywhere.
- Updates to the TI SCI and KNAS drivers to improve suspend/resume
support.
- Minor driver changes for mediatek, xilinx, allwinner, aspeed,
tegra, broadcom, amd, microchip and starfive specific drivers
- Memory controller updates for Tegra and Renesas for additional SoC
types and other improvements.
- Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces, to
update driver probing, object lifetimes and address minor bugs"
* tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
Revert "firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface"
Revert "Documentation: ABI: add sysfs interface for ZynqMP CSU registers"
memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate()
memory: tegra264: drop redundant tegra264_mc_icc_aggregate()
memory: tegra186-emc: stop borrowing MC aggregate hook for EMC
soc: aspeed: cleanup dead default for ASPEED_SOCINFO
firmware: tegra: bpmp: Add support for multi-socket platforms
firmware: tegra: bpmp: Propagate debugfs errors
soc/tegra: pmc: Add Tegra238 support
soc/tegra: pmc: Restrict power-off handler to Nexus 7
soc/tegra: pmc: Populate powergate debugfs only when needed
soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
soc/tegra: pmc: Remove unused legacy functions
soc/tegra: pmc: Create PMC context dynamically
firmware: samsung: acpm: remove compile-testing stubs
firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
firmware: samsung: acpm: Add TMU protocol support
firmware: samsung: acpm: Make acpm_ops const and access via pointer
firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
...
Currently the kernel relies on a global variable to reference the PMC
context. Use an explicit lookup for the PMC and pass that to the public
PMC APIs.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Without the cmu, nvdisplay will display colors that are notably darker
than intended. The vendor bootloader and the downstream display driver
enable the cmu and sets a sRGB table. Loading that table here results in
the intended colors.
Co-developed-by: Kurt Kiefer <kekiefer@gmail.com>
Signed-off-by: Kurt Kiefer <kekiefer@gmail.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Tested-by: Mikko Perttunen <mperttunen@nvidia.com> # Jetson AGX Xavier
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260407-tegra-drm-cmu-v4-1-2fe95f305afd@gmail.com
The KMS framework uses two slightly different definitions for the state
concept. For a given object (plane, CRTC, encoder, etc., so
drm_$OBJECT_state), the state is the entire state of that object.
However, at the device level, drm_atomic_state refers to a state update
for a limited number of objects.
Thus, drm_atomic_state isn't the entire device state, but only the full
state of some objects in that device. This has been an endless source of
confusion and thus bugs.
We can rename the drm_atomic_state structure to drm_atomic_commit to
make it less confusing.
This patch was created using:
rg -l drm_atomic_state | \
xargs sed -i 's/drm_atomic_state/drm_atomic_commit/g; s/drm_atomic_commit_helper/drm_atomic_state_helper/g'
mv drivers/gpu/drm/tests/drm_atomic_state_test.c drivers/gpu/drm/tests/drm_atomic_commit_test.c
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260427-drm-drm-atomic-update-v4-1-c0e713bfdf25@kernel.org
This function returned zero unconditionally. Make it return no value and
simplify all callers accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The NV12, NV21, NV16, NV61, NV24 and NV42 formats are supported by
Tegra114 and later display hardware. Add the necessary programming to
allow them to be used.
Note that this does not work for Tegra186 and later yet because those
generations have a different display architecture that doesn't support
the same formats.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add OPP and SoC core voltage scaling support to the display controller
driver. This is required for enabling system-wide DVFS on pre-Tegra186
SoCs.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Paul Fertser <fercerpav@gmail.com> # PAZ00 T20
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Asus Transformer TF700T is a Tegra30 tablet device which uses RGB->DSI
bridge that requires a precise clock rate in order to operate properly.
Tegra30 has a dedicated PLL for each display controller, hence the PLL
rate can be changed freely. Allow PLL rate changes on Tegra30+ for RGB
output. Configure the clock rate before display controller is enabled
since DC itself may be running off this PLL and it's not okay to change
the rate of the active PLL that doesn't support dynamic frequency
switching since hardware will hang.
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> #TF700T
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
It's useful to know the total number of underflow events and currently
the debug stats are getting reset each time CRTC is being disabled. Let's
account the overall number of events that doesn't get a reset.
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Display controller (DC) performs isochronous memory transfers, and thus,
has a requirement for a minimum memory bandwidth that shall be fulfilled,
otherwise framebuffer data can't be fetched fast enough and this results
in a DC's data-FIFO underflow that follows by a visual corruption.
The Memory Controller drivers provide facility for memory bandwidth
management via interconnect API. Let's wire up the interconnect API
support to the DC driver in order to fix the distorted display output
on T30 Ouya, T124 TK1 and other Tegra devices.
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[treding@nvidia.com: unbreak Tegra186+ display support]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Parameterize code in several places to allow scaling of windows. Note
that this currently still relies on static programming of the various
metering and memory pool allocation registers. This seems to work for
the common cases, but may eventually need to be updated to support
use-cases with multiple windows and higher bandwidth and latency
requirements.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The driver currently exposes several YUV formats but fails to properly
program all the registers needed to display such formats. Add the right
programming sequences so that overlay windows can be used to accelerate
color format conversions in multimedia playback use-cases.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra194 has a special physical address bit that enables some memory
swizzling logic to support different sector layouts. Support the bit
that selects the sector layout which is passed in the framebuffer
modifier.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The hardware cursor on Tegra186 differs slightly from the implementation
on older SoC generations. In particular the new implementation relies on
software for clipping the cursor against the screen. Fortunately, atomic
KMS already computes clipped coordinates for (cursor) planes, so this is
trivial to implement.
The format supported by the hardware cursor is also slightly different.
v2: use more drm_rect helpers (Dmitry)
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Support horizontal reflection mode which will allow to support 180°
rotation mode when combined with the vertical reflection.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This makes the naming consistent with the DRM core.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Handling of the IOMMU group attachment is common to all clients, so move
the group into the client to simplify code.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Older Tegra chips do support blending as well. Rename the SoC info entry
.supports_blending to .has_legacy_blending to eliminate the confusion.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Currently resized plane produces a "pixelated" image which doesn't look
nice, especially in a case of a video overlay. Enable scaling filters that
significantly improve image quality of a scaled overlay.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Remove unneeded iommu_group_get() and add missing iommu_group_put(),
correcting IOMMU group refcount. This is a minor correction / cleanup that
doesn't really fix anything because Tegra's IOMMU driver are built-in and
hence groups refcounting can't hold IOMMU driver from unloading.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Pass the list of valid format modifiers to planes upon initialization
and implement the ->format_mod_supported() callback so that userspace
can query for the valid combinations of formats and modifiers.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This implements alpha blending on legacy display controllers (Tegra20,
Tegra30 and Tegra114). While it's theoretically possible to support the
zpos property to enable userspace to specify the Z-order of each plane
individually, this is not currently supported and the same fixed Z-
order as previously defined is used.
Reverts commit 71835caa00 ("drm/tegra: fb: Force alpha formats") since
the opaque formats are now supported.
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Fixes: 7772fdaef9 ("drm/tegra: Support ARGB and ABGR formats")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Hardware reset isn't actually broken on Tegra20, but there is a
dependency on the first display controller to be taken out of reset for
the second to be enabled successfully. Model this dependency using a PM
device link.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[treding@nvidia.com: minor cleanups, extend commit message]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Implement the standard zpos property for planes on Tegra124 and later.
Earlier generations have a different blending unit that needs different
programming.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The spinlock is only used to serialize accesses to the DC_CMD_INT_MASK
register. However, this register is accesses either with interrupts
masked (in tegra_crtc_atomic_enable()) or protected by the vbl_lock and
vblank_time_lock spinlocks of the DRM device. Therefore, these accesses
don't need any extra serialization and the lock can be removed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Also, split up formats into per-SoC lists because not all generations
support all of them. Note that the list is now exhaustive for all RGB
formats, but not for YUV and indexed formats.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The SOR found on Tegra186 is very similar to the one found on Tegra210
and earlier. However, due to some changes in the display architecture,
some programming sequences have changed and some register have moved
around.
Signed-off-by: Thierry Reding <treding@nvidia.com>
These formats can easily be supported on all generations of Tegra.
Note that the XRGB and XBGR formats that we supported were in fact using
the ARGB and ABGR Tegra formats. This happened to work in cases where no
alpha was being considered. This change is also a fix for those formats.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The display architecture has changed in several signifcant ways with the
new Tegra186 SoC. Display controllers are a completely different design,
but have been given a frontend that simulates the register interface for
earlier chips.
Unfortunately the frontend isn't completely backwards compatible, so the
driver needs parameterization to take the changes into account.
One big change is that the total number of display controllers has been
increased to three. At the same time the number of planes available has
remained constant. However, planes can now be freely assigned between
the display controllers, giving applications more flexibility in making
the best use of the available resources.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The display architecture has changed in several significant ways with
the new Tegra186 SoC. Shared between all display controllers is a set
of common resources referred to as the display hub. The hub generates
accesses to memory and feeds them into various composition pipelines,
each of which being a window that can be assigned to arbitrary heads.
Atomic state is subclassed in order to track the global bandwidth
requirements and select and adjust the hub clocks appropriately. The
plane code is shared to a large degree with earlier SoC generations,
except where the programming differs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Move the display controller state definition to the header file so that
it can be referenced by other files.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra display hardware has GO bits and meets all the requirements to use
drm_crtc_arm_vblank_event(). Use it instead and get rid of the hand-
rolled implementation.
Signed-off-by: Thierry Reding <treding@nvidia.com>
There's no reason not to use them, and they already get all the
semantics right, so rip out all of the custom code and replace it by the
helpers.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Starting with Tegra124, the interface to set the background color (the
value generated for pixels that are not sourced from any window) is via
a different register. Earlier generations called this the border color.
Reverse the feature flag and assume that IP revisions that don't have
support for background color will support border color instead.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The ->late_register() and ->early_unregister() callbacks are called at
the right time to make sure userspace only accesses interfaces when it
should. Move debugfs registration and unregistration to these callback
functions to avoid potential races with userspace.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The SOR1 introduced on Tegra210 supports HDMI 2.0 and DisplayPort. Add
HDMI support and name the debugfs node after the type of SOR. The SOR
introduced with Tegra124 is known simply as "sor", whereas the
additional SOR found on Tegra210 is known as "sor1".
Signed-off-by: Thierry Reding <treding@nvidia.com>
The horizontal pulse enable bits are named H_PULSE{0,1,2}_ENABLE in the
TRM. Modify the driver to use the same naming for consistency.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The display controller on Tegra can use syncpoints to count VBLANK
events. syncpoints are 32-bit unsigned integers, so well suited as
VBLANK counters.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tegra124 supports a block-linear mode in addition to the regular pitch
linear and tiled modes. Add support for these by moving the internal
representation into a structure rather than a simple flag.
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable hardware cursor support on Tegra124. Earlier generations support
the hardware cursor to some degree as well, but not in a way that can be
generically exposed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
V_DIRECTION is the name of the field in the documentation, so use that
for consistency. Also add the H_DIRECTION field for completeness.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add support for eDP functionality found on Tegra124 and later SoCs. Only
fast link training is currently supported.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Some of the code in the CRTC's mode setting code is specific to the RGB
output or needs to be called slightly differently depending on the type
of output. Push that code down into the output drivers.
Signed-off-by: Thierry Reding <treding@nvidia.com>
