mirror of
https://github.com/torvalds/linux.git
synced 2026-09-19 09:08:02 +02:00
185a4caeec
526 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
c98d767b34 |
Arm:
"This is a bit of an odd merge window on the KVM/arm64 front. There is
absolutely no new feature in the pull request. It is purely fixes,
because it is simply becoming too hard to review new stuff when so
many AI-fuelled fixes hit the list".
- Significant cleanup of the vgic-v5 PPI support which was merged in
7.1. This makes the code more maintainable, and squashes a couple
of bugs in the meantime.
- Set of fixes for the handling of the MMU in an NV context,
particularly VNCR-triggered faults. S1POE support is fixed
as well.
- Large set of pKVM fixes, mostly addressing recurring issues
around hypervisor tracking of donated pages in obscure cases
where the donation could fail and leave things in a bizarre
state.
- Fixes for the so-called "lazy vgic init", which resulted in
sleeping operations in non-preemptible sections. This turned
out to be far more invasive than initially expected...
- Reduce the overhead of L1/L2 context switch by not touching
the FP registers.
- Fix the way non-implemented page sizes are dealt with when
a guest insist on using them for S2 translation.
- The usual set of low-impact fixes and cleanups all over the map.
Loongarch:
- On a request for lazy FPU load, load all FPU state that the VM
supports instead of enabling only the part (FPU, LSX or LASX)
that caused the FPU load request.
- Some enhancements about interrupt injection.
- Some bug fixes and other small changes.
RISC-V:
- Batch G-stage TLB flushes for GPA range based page table updates
- Convert HGEI line management to fully per-HART
- Fix missing CSR dirty marking when FWFT state updated via ONE_REG
- Fix stale FWFT feature exposure to Guest/VM
- Speed up dirty logging write faults using MMU rwlock and atomic
PTE updates using cmpxchg() for permission-only changes
- Use flexible array for APLIC IRQ state
- Use kvm_slot_dirty_track_enabled() for logging enable check on
a memslot
- Avoid skipping valid pages in kvm_riscv_gstage_wp_range()
- Avoid skipping valid pages in kvm_riscv_gstage_unmap_range()
- Use endian-specific __lelong for NACL shared memory
S390:
- KVM_PRE_FAULT_MEMORY support
- Support for 2G hugepages
- Support for the ASTFLEIE 2 facility
- Support for fast inject using kvm_arch_set_irq_inatomic
- Fix potential leak of uninitialized bytes
- A few more misc gmap fixes.
x86:
- Generic support for the more granular permissions allowed by EPT,
namely "read" (which was previously usurping the U bit) and
separate execution bits for kernel and userspace.
- Do not assume that all page tables start with U=1/W=1/NX=0 at the
root, as AMD GMET needs to have U=0 at the root.
- Introduce common assembly macros for use within Intel and AMD
vendor-specific vmentry code. This touches the SPEC_CTRL handling,
which is now entirely done in assembly for Intel (by reusing the
AMD code that already existed), and register save/restore which
uses some macro magic to compute the offsets in the struct. Both
of these are preparatory changes for upcoming APX support.
- Clean up KVM's register tracking and storage, primarily to prepare for
APX support, which expands the maximum number of GPRs from 16 to 32.
- Keep a single copy of the PDPTRs rather than two, since architecturally
there is just one.
- Handle EXIT_FASTPATH_EXIT_USERSPACE in vendor code to ensure vendor code
gets a chance to handle things like reaping the PML buffer.
- Update KVM's view of PV async enabling if and only if the MSR write fully
succeeds.
- Fix a variety of issues where the emulator doesn't honor guest-debug state,
and clean up related code along the way.
- Synthesize EPT Violation and #NPF "error code" bits when injecting faults
into L1 that didn't originate in hardware (in which case the VMCS/VMCB
doesn't hold relevant information).
- Add support for virtualizing (well, emulating) AMD's flavor of CPL>0 CPUID
faulting.
- Clean up the GPR APIs so that KVM's use of "raw" is consistent, and fix a
variety of minor bugs along the way.
- Fix an OOB memory access due to not checking the VP ID when handling a
Hyper-V PV TLB flush for L2.
- Fix a bug in the mediated PMU's handling of fixed counters that allowed the
guest to bypass the PMU event filter.
- Allow userspace to return EAGAIN when handling SNP and TDX hypercalls, so
the KVM can forward a "retry" status code to the guest, and reserve all
unused error codes for future usage.
- Overhaul the TDP MMU => S-EPT code to move as much S-EPT specific logic as
possible into the TDX code, and to funnel (almost) all S-EPT updates into
a single chokepoint. The motivation is largely to prepare for upcoming
Dynamic PAMT support, but the cleanups are nice to have on their own.
- Plug a hole in shadow page table handling, where KVM fails to recursively
zap nested EPT/NPT shadow page tables when the nested hypervisor tears
down its own EPT/NPT page tables from the bottom up
x86 (Intel):
- Support for nested MBEC (Mode-Based Execute Control), see above in the
generic section; also run with MBEC enabled even for non-nested mode.
- Use the kernel's "enum pg_level" in the TDX APIs instead of the TDX-Module's
level definitions (which are 0-based).
- Rework the TDX memory APIs to not require/assume that guest memory is
backed by "struct page" (in prepartion for guest_memfd hugepage support).
- Fix a largely benign bug where KVM TDX would incorrectly state it could
emulate several x2APIC MSRs.
- Use the "safe" WRMSR API when proxying LBR MSR writes as the to-be-written
value is guest controlled and completely unvalidated.
x86 (AMD):
- Support for nested GMET (Guest Mode Execution Trap), see above in the
generic section; also run with GMET enabled even for non-nested mode.
- Fixes and minor cleanups to GHCB handling, on top of the earlier work
already merged into 7.1-rc.
- Ensure KVM's copy of CR0 and CR3 are up-to-date prior to invoking
fastpath handlers.
- Add support for virtualizing gPAT (KVM previously just used L1's PAT when
running L2).
- Fix goofs where KVM mishandles side effects (e.g. single-step and PMC
updates) when emulating VMRUN.
- Fix a variety of bugs in AVIC's handling of x2APIC MSR interception, most
notably where KVM didn't disable interception of IRR, ISR, and TMR regs.
- Add support for virtualizing Host-Only/Guest-Only bits in the mediated PMU.
- Don't advertise support for unusable VM types, and account for VM types
that are disabled by firmware, e.g. to mitigate security vulnerabilities.
- Rewrite the SEV {en,de}crypt debug ioctls as they were riddle with bugs and
unnecessarily complicated, and add comprehensive tests.
- Clean up and deduplicate the SEV page pinning code.
- Fix minor goofs related to writing back CPUID information after firmware
rejects a CPUID page for an SNP vCPU.
Generic:
- Rename invalidate_begin() to invalidate_start() throughout KVM to follow
the kernel's nomenclature, e.g. for mmu_notifiers.
- Use guard() to cleanup up various KVM+VFIO flows.
- Minor cleanups.
guest_memfd:
- Return -EEXIST instead of -EINVAL if userspace attempts to bind a gmem
range to multiple memslots, and fix the test that was supposed to ensure
KVM returns -EEXIST.
- Treat memslot binding offsets and sizes as unsigned values to fix a bug
where KVM interprets a large "offset + size" as a negative value and allows
a nonsensical offset.
- Use the inode number instead of the page offset for the NUMA interleaving
index to fix a bug where the effective index would jump by two for
consecutive pages (the caller also adds in the page offset).
Selftests:
- Randomize the dirty log test's delay when reaping the bitmap on the first
pass, as always waiting only 1ms hid a KVM RISC-V bug as the test reaped the
bitmap before KVM could build up enough state to hit the bug.
- A pile of one-off fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmoypI0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNCSAf8CyuvicojnZGFsNcoY4DZ0whBj5l8
IwVkHaptuyGLSwPAebC/DwtU2NBY4CQdbtLjGmxenf+fSQOtcz1YWKbdY4Nr0hJG
euAb/wO47RqKp1C4WPi7lL2P4XHgmUgD5XZ1qDnRV9gnGddZi3QLLmKgAtNq9Z4m
+pAdGD2/RyZeI0Dx61+5ufE/z8YBlH6GrzgBTxfvvRNKqNDFykBenxYHI7seEfHC
BPz0LxjHDD8BMDUo86qaylZnaeQSmFTGO/eTgvCvabxG6WbM1s0w3K1owmUmP7o3
p9o8274Xh53iK2JYD/qGOtAJXejIwbYKT5bnvUQX0O1EH2+ouvSFapLQ9Q==
=sSqM
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"arm64:
This is a bit of an odd merge window on the KVM/arm64 front. There
is absolutely no new feature in the pull request. It is purely
fixes, because it is simply becoming too hard to review new stuff
when so many AI-fuelled fixes hit the list.
- Significant cleanup of the vgic-v5 PPI support which was merged in
7.1. This makes the code more maintainable, and squashes a couple
of bugs in the meantime
- Set of fixes for the handling of the MMU in an NV context,
particularly VNCR-triggered faults. S1POE support is fixed as well
- Large set of pKVM fixes, mostly addressing recurring issues around
hypervisor tracking of donated pages in obscure cases where the
donation could fail and leave things in a bizarre state
- Fixes for the so-called "lazy vgic init", which resulted in
sleeping operations in non-preemptible sections. This turned out to
be far more invasive than initially expected..
- Reduce the overhead of L1/L2 context switch by not touching the FP
registers
- Fix the way non-implemented page sizes are dealt with when a guest
insist on using them for S2 translation
- The usual set of low-impact fixes and cleanups all over the map
Loongarch:
- On a request for lazy FPU load, load all FPU state that the VM
supports instead of enabling only the part (FPU, LSX or LASX) that
caused the FPU load request
- Some enhancements about interrupt injection
- Some bug fixes and other small changes
RISC-V:
- Batch G-stage TLB flushes for GPA range based page table updates
- Convert HGEI line management to fully per-HART
- Fix missing CSR dirty marking when FWFT state updated via ONE_REG
- Fix stale FWFT feature exposure to Guest/VM
- Speed up dirty logging write faults using MMU rwlock and atomic PTE
updates using cmpxchg() for permission-only changes
- Use flexible array for APLIC IRQ state
- Use kvm_slot_dirty_track_enabled() for logging enable check on a
memslot
- Avoid skipping valid pages in kvm_riscv_gstage_wp_range()
- Avoid skipping valid pages in kvm_riscv_gstage_unmap_range()
- Use endian-specific __lelong for NACL shared memory
S390:
- KVM_PRE_FAULT_MEMORY support
- Support for 2G hugepages
- Support for the ASTFLEIE 2 facility
- Support for fast inject using kvm_arch_set_irq_inatomic
- Fix potential leak of uninitialized bytes
- A few more misc gmap fixes
x86:
- Generic support for the more granular permissions allowed by EPT,
namely "read" (which was previously usurping the U bit) and
separate execution bits for kernel and userspace
- Do not assume that all page tables start with U=1/W=1/NX=0 at the
root, as AMD GMET needs to have U=0 at the root
- Introduce common assembly macros for use within Intel and AMD
vendor-specific vmentry code. This touches the SPEC_CTRL handling,
which is now entirely done in assembly for Intel (by reusing the
AMD code that already existed), and register save/restore which
uses some macro magic to compute the offsets in the struct. Both of
these are preparatory changes for upcoming APX support
- Clean up KVM's register tracking and storage, primarily to prepare
for APX support, which expands the maximum number of GPRs from 16
to 32
- Keep a single copy of the PDPTRs rather than two, since
architecturally there is just one
- Handle EXIT_FASTPATH_EXIT_USERSPACE in vendor code to ensure vendor
code gets a chance to handle things like reaping the PML buffer
- Update KVM's view of PV async enabling if and only if the MSR write
fully succeeds
- Fix a variety of issues where the emulator doesn't honor
guest-debug state, and clean up related code along the way
- Synthesize EPT Violation and #NPF "error code" bits when injecting
faults into L1 that didn't originate in hardware (in which case the
VMCS/VMCB doesn't hold relevant information)
- Add support for virtualizing (well, emulating) AMD's flavor of
CPL>0 CPUID faulting
- Clean up the GPR APIs so that KVM's use of "raw" is consistent, and
fix a variety of minor bugs along the way
- Fix an OOB memory access due to not checking the VP ID when
handling a Hyper-V PV TLB flush for L2
- Fix a bug in the mediated PMU's handling of fixed counters that
allowed the guest to bypass the PMU event filter
- Allow userspace to return EAGAIN when handling SNP and TDX
hypercalls, so the KVM can forward a "retry" status code to the
guest, and reserve all unused error codes for future usage
- Overhaul the TDP MMU => S-EPT code to move as much S-EPT specific
logic as possible into the TDX code, and to funnel (almost) all
S-EPT updates into a single chokepoint. The motivation is largely
to prepare for upcoming Dynamic PAMT support, but the cleanups are
nice to have on their own
- Plug a hole in shadow page table handling, where KVM fails to
recursively zap nested EPT/NPT shadow page tables when the nested
hypervisor tears down its own EPT/NPT page tables from the bottom
up
x86 (Intel):
- Support for nested MBEC (Mode-Based Execute Control), see above in
the generic section; also run with MBEC enabled even for non-nested
mode
- Use the kernel's "enum pg_level" in the TDX APIs instead of the
TDX-Module's level definitions (which are 0-based)
- Rework the TDX memory APIs to not require/assume that guest memory
is backed by "struct page" (in prepartion for guest_memfd hugepage
support)
- Fix a largely benign bug where KVM TDX would incorrectly state it
could emulate several x2APIC MSRs
- Use the "safe" WRMSR API when proxying LBR MSR writes as the
to-be-written value is guest controlled and completely unvalidated
x86 (AMD):
- Support for nested GMET (Guest Mode Execution Trap), see above in
the generic section; also run with GMET enabled even for non-nested
mode
- Fixes and minor cleanups to GHCB handling, on top of the earlier
work already merged into 7.1-rc
- Ensure KVM's copy of CR0 and CR3 are up-to-date prior to invoking
fastpath handlers
- Add support for virtualizing gPAT (KVM previously just used L1's
PAT when running L2)
- Fix goofs where KVM mishandles side effects (e.g. single-step and
PMC updates) when emulating VMRUN
- Fix a variety of bugs in AVIC's handling of x2APIC MSR
interception, most notably where KVM didn't disable interception of
IRR, ISR, and TMR regs
- Add support for virtualizing Host-Only/Guest-Only bits in the
mediated PMU
- Don't advertise support for unusable VM types, and account for VM
types that are disabled by firmware, e.g. to mitigate security
vulnerabilities
- Rewrite the SEV {en,de}crypt debug ioctls as they were riddle with
bugs and unnecessarily complicated, and add comprehensive tests
- Clean up and deduplicate the SEV page pinning code
- Fix minor goofs related to writing back CPUID information after
firmware rejects a CPUID page for an SNP vCPU
Generic:
- Rename invalidate_begin() to invalidate_start() throughout KVM to
follow the kernel's nomenclature, e.g. for mmu_notifiers
- Use guard() to cleanup up various KVM+VFIO flows
- Minor cleanups
guest_memfd:
- Return -EEXIST instead of -EINVAL if userspace attempts to bind a
gmem range to multiple memslots, and fix the test that was supposed
to ensure KVM returns -EEXIST
- Treat memslot binding offsets and sizes as unsigned values to fix a
bug where KVM interprets a large "offset + size" as a negative
value and allows a nonsensical offset
- Use the inode number instead of the page offset for the NUMA
interleaving index to fix a bug where the effective index would
jump by two for consecutive pages (the caller also adds in the page
offset)
Selftests:
- Randomize the dirty log test's delay when reaping the bitmap on the
first pass, as always waiting only 1ms hid a KVM RISC-V bug as the
test reaped the bitmap before KVM could build up enough state to
hit the bug
- A pile of one-off fixes and cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (326 commits)
KVM: x86/mmu: Ensure hugepage is in by slot before checking max mapping level
KVM: x86: Fix shadow paging use-after-free due to unexpected role
KVM: s390: Introducing kvm_arch_set_irq_inatomic fast inject
KVM: s390: Enable adapter_indicators_set to use mapped pages
KVM: s390: Add map/unmap ioctl and clean mappings post-guest
riscv: kvm: Use endian-specific __lelong for NACL shared memory
KVM: selftests: access_tracking_perf_test: bump number of NUMA nodes to 32
KVM: s390: vsie: Implement ASTFLEIE facility 2
KVM: s390: vsie: Refactor handle_stfle
s390/sclp: Detect ASTFLEIE 2 facility
KVM: s390: Minor refactor of base/ext facility lists
KVM: x86/mmu: move pdptrs out of the MMU
KVM: x86: check that kvm_handle_invpcid is only invoked with shadow paging
KVM: nSVM: invalidate cached PDPTRs across nested NPT transitions
KVM: nVMX: remove unnecessary code in prepare_vmcs02_rare
KVM: x86: remove nested_mmu from mmu_is_nested()
KVM: arm64: vgic-its: Make ABI commit helpers return void
KVM: s390: Initialize KVM_S390_GET_CMMA_BITS memory
LoongArch: KVM: Add missing slots_lock for device register/unregister
LoongArch: KVM: Validate irqchip index in irqfd routing
...
|
||
|
Linus Torvalds
|
0d8c113493 |
This update includes the following changes:
API:
- Drop support for off-CPU cryptography in af_alg.
- Document that af_alg is *always* slower.
- Document the deprecation of af_alg.
- Remove zero-copy support from skcipher and aead in af_alg.
- Cap AEAD AD length to 0x80000000 in af_alg.
- Free default RNG on module exit.
Algorithms:
- Fix vli multiplication carry overflow in ecc.
- Drop unused cipher_null crypto_alg.
- Remove unused variants of drbg.
- Use lib/crypto in drbg.
- Use memcpy_from/to_sglist in authencesn.
- Allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode.
- Disallow RSA PKCS#1 SHA-1 sig algs in FIPS mode.
- Filter out async aead implementations at alloc in krb5.
- Fix non-parallel fallback by rstoring callback in pcrypt.
- Validate poly1305 template argument in chacha20poly1305.
Drivers:
- Add sysfs PCI reset support to qat.
- Add KPT support for GEN6 devices to qat.
- Remove unused character device and ioctls from qat.
- Add support for hw access via SMCC to mtk.
- Remove prng support from crypto4xx.
- Remove prng support from hisi-trng.
- Remove prng support from sun4i-ss.
- Remove prng support from xilinx-trng.
- Remove loongson-rng.
- Remove exynos-rng.
Others:
- Remove support for AIO on sockets.
-----BEGIN PGP SIGNATURE-----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=4BGT
-----END PGP SIGNATURE-----
Merge tag 'v7.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Drop support for off-CPU cryptography in af_alg
- Document that af_alg is *always* slower
- Document the deprecation of af_alg
- Remove zero-copy support from skcipher and aead in af_alg
- Cap AEAD AD length to 0x80000000 in af_alg
- Free default RNG on module exit
Algorithms:
- Fix vli multiplication carry overflow in ecc
- Drop unused cipher_null crypto_alg
- Remove unused variants of drbg
- Use lib/crypto in drbg
- Use memcpy_from/to_sglist in authencesn
- Allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
- Disallow RSA PKCS#1 SHA-1 sig algs in FIPS mode
- Filter out async aead implementations at alloc in krb5
- Fix non-parallel fallback by rstoring callback in pcrypt
- Validate poly1305 template argument in chacha20poly1305
Drivers:
- Add sysfs PCI reset support to qat
- Add KPT support for GEN6 devices to qat
- Remove unused character device and ioctls from qat
- Add support for hw access via SMCC to mtk
- Remove prng support from crypto4xx
- Remove prng support from hisi-trng
- Remove prng support from sun4i-ss
- Remove prng support from xilinx-trng
- Remove loongson-rng
- Remove exynos-rng
Others:
- Remove support for AIO on sockets"
* tag 'v7.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (196 commits)
crypto: tegra - fix refcount leak in tegra_se_host1x_submit()
crypto: rng - Free default RNG on module exit
crypto: testmgr - allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
hwrng: jh7110 - fix refcount leak in starfive_trng_read()
crypto: atmel-ecc - drop dead code in atmel_ecdh_max_size
crypto: cavium/cpt - fix DMA cleanup using wrong loop index
crypto: marvell/octeontx - fix DMA cleanup using wrong loop index
MAINTAINERS: make myself the maintainer of the Qualcomm QCE driver
crypto: amcc - convert irq_of_parse_and_map to platform_get_irq
crypto: sun4i-ss - Remove insecure and unused rng_alg
hwrng: xilinx - Move xilinx-rng into drivers/char/hw_random/
crypto: xilinx-trng - Replace crypto_drbg_ctr_df() with HMAC-SHA512
crypto: xilinx-trng - Fix return value of xtrng_hwrng_trng_read()
crypto: xilinx-trng - Remove crypto_rng interface
crypto: exynos-rng - Remove exynos-rng driver
hwrng: hisi-trng - Move hisi-trng into drivers/char/hw_random/
crypto: hisi-trng - Remove crypto_rng interface
crypto: loongson - Remove broken and unused loongson-rng
crypto: crypto4xx - Remove insecure and unused rng_alg
crypto: qat - validate RSA CRT component lengths
...
|
||
|
Alexey Kardashevskiy
|
50e506201b |
crypto: ccp/tsm - Enable the root port after the endpoint
The PCIe r7.0, chapter "6.33.8 Other IDE Rules" mandates if selective IDE
is enabled for config requersts, a stream must be enabled on the endpoint
before enabling it on the rootport:
===
For Selective IDE, the Stream must not be used until it has been enabled in
both Partner Ports. For cases where one of the Partner Ports is a Root Port
and Selective IDE for Configuration Requests is enabled, the other
Partner Port must be enabled prior to the Root Port. For other scenarios,
the mechanisms to satisfy this requirement are implementation-specific.
===
Do what the spec says.
Fixes:
|
||
|
Stepan Ionichev
|
930d9d36ea |
crypto: ccp/sev-dev-tsm - bail out early when pdev->bus is NULL
dsm_create() initially checks pdev->bus when computing segment_id:
u8 segment_id = pdev->bus ? pci_domain_nr(pdev->bus) : 0;
But the next two lines unconditionally dereference pdev->bus via
pcie_find_root_port() and especially pci_dev_id(pdev), which expands
to PCI_DEVID(dev->bus->number, dev->devfn). If pdev->bus is in fact
NULL, segment_id is initialised to 0 but the very next statement
crashes the kernel.
smatch flags this:
drivers/crypto/ccp/sev-dev-tsm.c:253 dsm_create() error: we
previously assumed 'pdev->bus' could be null (see line 251)
Make the NULL handling consistent: if pdev->bus is NULL the device
has no PCI context to work with and SEV TIO setup cannot proceed,
so return -ENODEV before any of the bus-dependent lookups. The
remaining initialisation now runs only on the path where pdev->bus
is known to be valid.
No change for callers where pdev->bus is non-NULL, which is the
only case where dsm_create() did meaningful work before this change.
Fixes:
|
||
|
Sean Christopherson
|
ef8c9dacda |
crypto: ccp - Treat zero-length cert chain as query for blob lengths
When handling a PDH export, treat a zero-length userspace cert chain buffer
as a request to query the length of the relevant blobs. Failure to account
for the zero-length buffer trips a BUG_ON() when running with
CONFIG_DEBUG_VIRTUAL=y due to trying to get the physical address of the
ZERO_SIZE_PTR (returned by kzalloc() on the bogus allocation).
kernel BUG at arch/x86/mm/physaddr.c:28 !
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 30 UID: 0 PID: 28580 Comm: syz.2.18 Kdump: loaded
Tainted: G W 6.18.16-smp-DEV #1 NONE
Tainted: [W]=WARN
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025
RIP: 0010:__phys_addr+0x16a/0x180 arch/x86/mm/physaddr.c:28
RSP: 0018:ffffc9008329fc80 EFLAGS: 00010293
RAX: ffffffff8179110a RBX: 0000778000000010 RCX: ffff8884e6992600
RDX: 0000000000000000 RSI: 0000000080000010 RDI: 0000778000000010
RBP: ffffc9008329fdf0 R08: 0000000000000dc0 R09: 00000000ffffffff
R10: dffffc0000000000 R11: fffffbfff126d297 R12: dffffc0000000000
R13: 1ffff92010653fc8 R14: 0000000080000010 R15: dffffc0000000000
FS: 0000555556bec9c0(0000) GS:ffff88aa4ce1c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd3159e7000 CR3: 00000004fbc44000 CR4: 0000000000350ef0
Call Trace:
<TASK>
[<ffffffff853d3869>] sev_ioctl_do_pdh_export+0x559/0x7a0 drivers/crypto/ccp/sev-dev.c:2308
[<ffffffff853d1fdd>] sev_ioctl+0x2cd/0x480 drivers/crypto/ccp/sev-dev.c:2556
[<ffffffff82549ebc>] vfs_ioctl fs/ioctl.c:52 [inline]
[<ffffffff82549ebc>] __do_sys_ioctl fs/ioctl.c:598 [inline]
[<ffffffff82549ebc>] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:584
[<ffffffff8630115f>] do_syscall_x64 arch/x86/entry/syscall_64.c:64 [inline]
[<ffffffff8630115f>] do_syscall_64+0x9f/0xf40 arch/x86/entry/syscall_64.c:98
[<ffffffff81000136>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fd3158eac39
</TASK>
Thankfully, the bug is benign outside of CONFIG_DEBUG_VIRTUAL=y as getting
the physical address is just arithmetic, and the PSP errors out before
trying to write to the garbage address (which it must, otherwise querying
the blob lengths would clobber memory at pfn=0).
Fixes:
|
||
|
Tycho Andersen (AMD)
|
08f0e65e78 |
crypto: ccp - Do not initialize SNP for ioctl(SNP_CONFIG)
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
Refuse to re-try initialization if SNP is not already initialized for
SNP_CONFIG.
This is technically an ABI break: before if SNP initialization failed it
could be transparently retriggered by this ioctl, and if no VMs were
running, everything worked fine. Hopefully this is enough of a corner case
that nobody will notice, but someone does, there are a few options:
* do something like symbol_get() for kvm and refuse to initialize if KVM is
loaded
* check each cpu's HSAVE_PA for non-zero data before re-initializing
* once initialization has failed, continue to refuse to initialize until
the ccp module is unloaded
Fixes:
|
||
|
Tycho Andersen (AMD)
|
f91e9dbb58 |
crypto: ccp - Do not initialize SNP for ioctl(SNP_VLEK_LOAD)
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
The SEV firmware docs for SNP_VLEK_LOAD note:
> On SNP_SHUTDOWN, the VLEK is deleted.
That is, the initialization/shutdown wrapper here is pointless, because the
firmware immediately throws away the key anyway. Instead, refuse to do
anything if SNP has not been previously initialized.
This is an ABI break: before, this was a no-op and almost certainly a
mistake by userspace, and now it returns -ENODEV. ABI compatibility could be
maintained here by simply returning 0 in the check instead.
Fixes:
|
||
|
Tycho Andersen (AMD)
|
5a1364da2f |
crypto: ccp - Do not initialize SNP for ioctl(SNP_COMMIT)
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
The SNP_COMMIT command does not require the firmware to be in any
particular state. Skip initializing it if it was previously uninitialized.
The SEV-SNP firmware specification doc 56860 does not mention SNP_COMMIT in
Table 5 as a command that is allowed in the UNINIT state, but it is in fact
allowed and a future documentation update will reflect that.
Fixes:
|
||
|
Tycho Andersen (AMD)
|
fb1758e74b |
crypto: ccp - Do not initialize SNP for SEV ioctls
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
sev_move_to_init_state() is called for ioctls requiring only SEV firmware:
SEV_PEK_GEN, SEV_PDH_GEN, SEV_PEK_CSR, SEV_PEK_CERT_IMPORT, and
SEV_PDH_CERT_EXPORT. After the firmware command, it does SEV_SHUTDOWN on
the SEV firmware. Since these commands do not require SNP to be
initialized, skip it by calling __sev_platform_init_locked() which only
initializes the SEV firmware. This way SNP is not Initialized at all, and
HSAVE_PA is not cleared.
The previous code saved any SEV initialization firmware error to
init_args.error and then threw it away and hardcoded the return value of
INVALID_PLATFORM_STATE regardless of the real firmware error. This patch
changes it to surface the underlying error, which is hopefully both more
useful and doesn't cause any problems.
Note that it is still safe to call __sev_firmware_shutdown() directly: it
calls __sev_snp_shutdown_locked(), which skips SNP shutdown if SNP was not
initialized.
Fixes:
|
||
|
Uwe Kleine-König (The Capable Hub)
|
15d253c5d7 |
crypto: ccp - Define pci_device_ids using named initializers
The .driver_data member of the struct pci_device_id array was initialized by list expressions. This isn't easily readable if you're not into PCI. Using the PCI_DEVICE macro and named initializers is more explicit and thus easier to parse. Also skip explicit assignment of 0 (which the compiler then takes care of) in the terminating entry. Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Tycho Andersen
|
4b28f0846e |
crypto/ccp: export firmware supported vm types
In some configurations, the firmware does not support all VM types. The SEV
firmware has an entry in the TCB_VERSION structure referred to as the
Security Version Number in the SEV-SNP firmware specification and referred
to as the "SPL" in SEV firmware release notes. The SEV firmware release
notes say:
On every SEV firmware release where a security mitigation has been
added, the SNP SPL gets increased by 1. This is to let users know that
it is important to update to this version.
The SEV firmware release that fixed CVE-2025-48514 by disabling SEV-ES
support on vulnerable platforms has this SVN increased to reflect the fix.
The SVN is platform-specific, as is the structure of TCB_VERSION.
Check CURRENT_TCB instead of REPORTED_TCB, since the firmware behaves with
the CURRENT_TCB SVN level and will reject SEV-ES VMs accordingly.
Parse the SVN, and mask off the SEV_ES supported VM type from the list of
supported types if it is above the per-platform threshold for the relevant
platforms.
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Tycho Andersen (AMD) <tycho@kernel.org>
Link: https://patch.msgid.link/20260416232329.3408497-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
||
|
Tycho Andersen
|
acf4d11a35 |
crypto/ccp: hoist kernel part of SNP_PLATFORM_STATUS
...to its own function. This way it can be used when the kernel needs access to the platform status regardless of the INIT state of the firmware. No functional change intended. Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Tycho Andersen (AMD) <tycho@kernel.org> Link: https://patch.msgid.link/20260416232329.3408497-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
Tycho Andersen (AMD)
|
e9d29f4a91 |
crypto/ccp: Skip SNP_INIT if preparation fails
If snp_prepare() fails, SNP_INIT will fail, so skip it and return early. Note that this is not a change in initialization behavior: if SNP_INIT fails even before this change, it will still return an error and __sev_snp_init_locked() will fail initialization of other SEV modes. Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Nikunj A Dadhania <nikunj@amd.com> Link: https://lore.kernel.org/20260429155636.540040-1-tycho@kernel.org |
||
|
Tycho Andersen (AMD)
|
fed613c123 |
crypto: ccp - Initialize data during __sev_snp_init_locked()
Sashiko notes:
> is the stack variable data left uninitialized when taking the else branch?
> Since data.tio_en is later evaluated unconditionally, could stack garbage
> cause it to evaluate to true, leading to erroneous attempts to allocate
> pages and initialize SEV-TIO on unsupported hardware?
If the firmware is too old to support SEV_INIT_EX, data is left
uninitialized but used in the debug logging about whether TIO is enabled or
not.
Fixes:
|
||
|
Tycho Andersen (AMD)
|
a8d5370eef |
crypto: ccp - Check for page allocation failure correctly in TIO
Sashiko notes:
> if __snp_alloc_firmware_pages() returns NULL under memory pressure, is it
> safe to pass it directly to page_address()?
>
> On architectures without HASHED_PAGE_VIRTUAL, page_address(NULL) might
> compute a deterministic but invalid, non-zero virtual address. The
> subsequent if (tio_status) check would then evaluate to true, and
> sev_tsm_init_locked() would dereference the invalid pointer.
Indeed, page_address(NULL) will return non-NULL garbage here. Fix this by
checking the page allocation itself for NULL, not the resulting virtual
address.
Fixes:
|
||
|
Tycho Andersen (AMD)
|
1b864b6cb2 |
crypto: ccp - Fix snp_filter_reserved_mem_regions() off-by-one
Sashiko notes:
> regarding the bounds check in snp_filter_reserved_mem_regions()
> called via walk_iomem_res_desc(): does the check
> if ((range_list->num_elements * 16 + 8) > PAGE_SIZE)
> allow an off-by-one heap buffer overflow?
>
> If range_list->num_elements is 255, 255 * 16 + 8 = 4088, which is <= 4096.
> Writing range->base (8 bytes) fills 4088-4095, but writing range->page_count
> (4 bytes) would write to 4096-4099, overflowing the kzalloc-allocated
> PAGE_SIZE buffer.
Fix this by accounting for the entry about to be written to, in addition to
the entries that are already allocated.
Fixes:
|
||
|
Tycho Andersen (AMD)
|
4a76a164ba |
crypto: ccp - Reverse the cleanup order in psp_dev_destroy()
Before SNP x86 shutdown [1], all HV_FIXED pages were always leaked on
module unload. Now pages can be reclaimed if they are freed before SNP
shutdown.
The SFS driver does sfs_dev_destroy() -> snp_free_hv_fixed_pages(), marking
the command buffer as free. But this happens after sev_dev_destroy() in
psp_dev_destroy(), so the pages are always leaked.
Rearrange psp_dev_destroy() to destroy things in the reverse order from
psp_init(), so that any dependencies can be unwound accordingly. This lets
SFS free the page and the subsequent SNP shutdown release it.
This was identified with use of Chris Mason's review-prompts:
https://github.com/masoncl/review-prompts
[1]: https://lore.kernel.org/all/20260324161301.1353976-1-tycho@kernel.org/
Fixes:
|
||
|
Paul Moses
|
a7a1f3cdd6 |
crypto: ccp - copy IV using skcipher ivsize
AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver.
ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV
buffer while RFC3686 skciphers expose an 8-byte IV, so the restore
overruns the provided buffer.
Use crypto_skcipher_ivsize() to copy only the algorithm's IV length.
Fixes:
|
||
|
Sean Christopherson
|
4f685dbfa8 |
crypto: ccp: Don't attempt to copy ID to userspace if PSP command failed
When retrieving the ID for the CPU, don't attempt to copy the ID blob to
userspace if the firmware command failed. If the failure was due to an
invalid length, i.e. the userspace buffer+length was too small, copying
the number of bytes _firmware_ requires will overflow the kernel-allocated
buffer and leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 64 at addr ffff8881867f5960 by task syz.0.906/24388
CPU: 130 UID: 0 PID: 24388 Comm: syz.0.906 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025
Call Trace:
<TASK>
dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120
print_address_description ../mm/kasan/report.c:378 [inline]
print_report+0xbc/0x260 ../mm/kasan/report.c:482
kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595
check_region_inline ../mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200
instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
_inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
_copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
copy_to_user ../include/linux/uaccess.h:236 [inline]
sev_ioctl_do_get_id2+0x361/0x490 ../drivers/crypto/ccp/sev-dev.c:2222
sev_ioctl+0x25f/0x490 ../drivers/crypto/ccp/sev-dev.c:2575
vfs_ioctl ../fs/ioctl.c:51 [inline]
__do_sys_ioctl ../fs/ioctl.c:597 [inline]
__se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error.
Reported-by: Alexander Potapenko <glider@google.com>
Reported-by: Sebastian Alba Vives <sebasjosue84@gmail.com>
Fixes:
|
||
|
Sean Christopherson
|
e76239fed3 |
crypto: ccp: Don't attempt to copy PDH cert to userspace if PSP command failed
When retrieving the PDH cert, don't attempt to copy the blobs to userspace
if the firmware command failed. If the failure was due to an invalid
length, i.e. the userspace buffer+length was too small, copying the number
of bytes _firmware_ requires will overflow the kernel-allocated buffer and
leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 2084 at addr ffff8885c4ab8aa0 by task syz.0.186/21033
CPU: 51 UID: 0 PID: 21033 Comm: syz.0.186 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.84.12-0 11/17/2025
Call Trace:
<TASK>
dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120
print_address_description ../mm/kasan/report.c:378 [inline]
print_report+0xbc/0x260 ../mm/kasan/report.c:482
kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595
check_region_inline ../mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200
instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
_inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
_copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
copy_to_user ../include/linux/uaccess.h:236 [inline]
sev_ioctl_do_pdh_export+0x3d3/0x7c0 ../drivers/crypto/ccp/sev-dev.c:2347
sev_ioctl+0x2a2/0x490 ../drivers/crypto/ccp/sev-dev.c:2568
vfs_ioctl ../fs/ioctl.c:51 [inline]
__do_sys_ioctl ../fs/ioctl.c:597 [inline]
__se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error.
Reported-by: Alexander Potapenko <glider@google.com>
Reported-by: Sebastian Alba Vives <sebasjosue84@gmail.com>
Fixes:
|
||
|
Sean Christopherson
|
abe4a6d6f6 |
crypto: ccp: Don't attempt to copy CSR to userspace if PSP command failed
When retrieving the PEK CSR, don't attempt to copy the blob to userspace
if the firmware command failed. If the failure was due to an invalid
length, i.e. the userspace buffer+length was too small, copying the number
of bytes _firmware_ requires will overflow the kernel-allocated buffer and
leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 2084 at addr ffff898144612e20 by task syz.9.219/21405
CPU: 14 UID: 0 PID: 21405 Comm: syz.9.219 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025
Call Trace:
<TASK>
dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120
print_address_description ../mm/kasan/report.c:378 [inline]
print_report+0xbc/0x260 ../mm/kasan/report.c:482
kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595
check_region_inline ../mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200
instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
_inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
_copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
copy_to_user ../include/linux/uaccess.h:236 [inline]
sev_ioctl_do_pek_csr+0x31f/0x590 ../drivers/crypto/ccp/sev-dev.c:1872
sev_ioctl+0x3a4/0x490 ../drivers/crypto/ccp/sev-dev.c:2562
vfs_ioctl ../fs/ioctl.c:51 [inline]
__do_sys_ioctl ../fs/ioctl.c:597 [inline]
__se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error.
Reported-by: Alexander Potapenko <glider@google.com>
Reported-by: Sebastian Alba Vives <sebasjosue84@gmail.com>
Fixes:
|
||
|
Linus Torvalds
|
aec2f682d4 |
This update includes the following changes:
API:
- Replace crypto_get_default_rng with crypto_stdrng_get_bytes.
- Remove simd skcipher support.
- Allow algorithm types to be disabled when CRYPTO_SELFTESTS is off.
Algorithms:
- Remove CPU-based des/3des acceleration.
- Add test vectors for authenc(hmac(md5),cbc(aes)).
- Add test vectors for authenc(hmac(md5),cbc(des)).
- Add test vectors for authenc(hmac(md5),rfc3686(ctr(aes))).
- Add test vectors for authenc(hmac(sha1),rfc3686(ctr(aes))).
- Add test vectors for authenc(hmac(sha224),rfc3686(ctr(aes))).
- Add test vectors for authenc(hmac(sha256),rfc3686(ctr(aes))).
- Add test vectors for authenc(hmac(sha384),rfc3686(ctr(aes))).
- Add test vectors for authenc(hmac(sha512),rfc3686(ctr(aes))).
- Replace spin lock with mutex in jitterentropy.
Drivers:
- Add authenc algorithms to safexcel.
- Add support for zstd in qat.
- Add wireless mode support for QAT GEN6.
- Add anti-rollback support for QAT GEN6.
- Add support for ctr(aes), gcm(aes), and ccm(aes) in dthev2.
-----BEGIN PGP SIGNATURE-----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=KoAB
-----END PGP SIGNATURE-----
Merge tag 'v7.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Replace crypto_get_default_rng with crypto_stdrng_get_bytes
- Remove simd skcipher support
- Allow algorithm types to be disabled when CRYPTO_SELFTESTS is off
Algorithms:
- Remove CPU-based des/3des acceleration
- Add test vectors for authenc(hmac(md5),cbc({aes,des})) and
authenc(hmac({md5,sha1,sha224,sha256,sha384,sha512}),rfc3686(ctr(aes)))
- Replace spin lock with mutex in jitterentropy
Drivers:
- Add authenc algorithms to safexcel
- Add support for zstd in qat
- Add wireless mode support for QAT GEN6
- Add anti-rollback support for QAT GEN6
- Add support for ctr(aes), gcm(aes), and ccm(aes) in dthev2"
* tag 'v7.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (129 commits)
crypto: af_alg - use sock_kmemdup in alg_setkey_by_key_serial
crypto: vmx - remove CRYPTO_DEV_VMX from Kconfig
crypto: omap - convert reqctx buffer to fixed-size array
crypto: atmel-sha204a - add Thorsten Blum as maintainer
crypto: atmel-ecc - add Thorsten Blum as maintainer
crypto: qat - fix IRQ cleanup on 6xxx probe failure
crypto: geniv - Remove unused spinlock from struct aead_geniv_ctx
crypto: qce - simplify qce_xts_swapiv()
crypto: hisilicon - Fix dma_unmap_single() direction
crypto: talitos - rename first/last to first_desc/last_desc
crypto: talitos - fix SEC1 32k ahash request limitation
crypto: jitterentropy - replace long-held spinlock with mutex
crypto: hisilicon - remove unused and non-public APIs for qm and sec
crypto: hisilicon/qm - drop redundant variable initialization
crypto: hisilicon/qm - remove else after return
crypto: hisilicon/qm - add const qualifier to info_name in struct qm_cmd_dump_item
crypto: hisilicon - fix the format string type error
crypto: ccree - fix a memory leak in cc_mac_digest()
crypto: qat - add support for zstd
crypto: qat - use swab32 macro
...
|
||
|
Linus Torvalds
|
60b8d4d492 |
- Change the SEV host code handling of when SNP gets enabled in order to allow
the machine to claim SNP-related resources only when SNP guests are really going to be launched. The user requests this by loading the ccp module and thus it controls when SNP initialization is done So export an API which module code can call and do the necessary SNP setup only when really needed - Drop an unnecessary write-back and invalidate operation that was being performed too early, since the ccp driver already issues its own at the correct point in the initialization sequence — Drop the hotplug callbacks for enabling SNP on newly onlined CPUs, which were both architecturally unsound (the firmware rejects initialization if any CPU lacks the required configuration) and buggy (the MFDM SYSCFG MSR bit was not being set) - Code refactoring and cleanups to accomplish the above -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmndWHYACgkQEsHwGGHe VUrp5w/+KtaEmeIJ8w5tkZ1haY6/FaG0mPKkBVoIEbt4TR2p7JmdCDS0yVi88+Ze GnsmKbesinhMzH3SFcQWOHu17c5BYyu8HllDhKqvAalwp0BZXSsz0LruJJC9vyqz 6J89iGPhvFDlV3aE8gSAVNu8bzfQwoiAGS4C8QXVnerUCuGMqrM31dAyroqmRw+Y QNeSqm2OW3hkisSZPga8euo7e9iwGuXufhR/mxumrLY3k7mK0U9tDqMA9XaHqfLI TssalBrhdBJkf62Cj5gByVOlVVq6E4ii3xR0Pbs35BkXchdCM+ni89BcdJTrwzcr fcmsc0HXZud5ZzTi4BYPyEUuJbNshj2EuhVTaLbIGL0kPO/MNJ1xrGfAF1NrkqmD ATH5B5uCCwUxTJJc0Fwj4McVpW/TCqXP/QDEpMoN8yQX8yejQBGRcTKVIEzyGrze GziQ+Oem/MLTBz97r8p/CXR6ADDdqIxiO1WF1hDpYoDQqtdE+DeXSscLvSH+f4C+ 6x3EjrfMD8tNrf9JYE/aRdoF72q5GlWSh06RWlQrv2A+OezQCe82yMAPiUqaS1HS GsTJtoeKVDZNW2EfIl4HNzf0PemhD8JlJSRV/euaW6ipl1gDm4YasmYyhn2pL8WI Q0I9Ud2pnDmYFjxkfPmMCsnwkdSPCXlQ7/EeclYswWAKnoDrOAc= =2eQs -----END PGP SIGNATURE----- Merge tag 'x86_sev_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 SEV updates from Borislav Petkov: - Change the SEV host code handling of when SNP gets enabled in order to allow the machine to claim SNP-related resources only when SNP guests are really going to be launched. The user requests this by loading the ccp module and thus it controls when SNP initialization is done So export an API which module code can call and do the necessary SNP setup only when really needed - Drop an unnecessary write-back and invalidate operation that was being performed too early, since the ccp driver already issues its own at the correct point in the initialization sequence - Drop the hotplug callbacks for enabling SNP on newly onlined CPUs, which were both architecturally unsound (the firmware rejects initialization if any CPU lacks the required configuration) and buggy (the MFDM SYSCFG MSR bit was not being set) - Code refactoring and cleanups to accomplish the above * tag 'x86_sev_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: crypto/ccp: Update HV_FIXED page states to allow freeing of memory crypto/ccp: Implement SNP x86 shutdown x86/sev, crypto/ccp: Move HSAVE_PA setup to arch/x86/ x86/sev, crypto/ccp: Move SNP init to ccp driver x86/sev: Create snp_shutdown() x86/sev: Create snp_prepare() x86/sev: Create a function to clear/zero the RMP x86/sev: Rename SNP_FEATURES_PRESENT to SNP_FEATURES_IMPL x86/virt/sev: Keep the RMP table bookkeeping area mapped x86/virt/sev: Drop WBINVD before setting MSR_AMD64_SYSCFG_SNP_EN x86/virt/sev: Drop support for SNP hotplug |
||
|
Thorsten Blum
|
ee31b703e8 |
crypto: ccp - Replace snprintf("%s") with strscpy
Replace snprintf("%s") with the faster and more direct strscpy().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
||
|
Tom Lendacky
|
c3aa64ab6a |
crypto/ccp: Update HV_FIXED page states to allow freeing of memory
After SNP is disabled, any pages allocated as HV_FIXED can now be freed. Update the page state of these pages and the snp_leak_hv_fixed_pages() function to free pages on SNP_SHUTDOWN. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Link: https://patch.msgid.link/20260324161301.1353976-8-tycho@kernel.org |
||
|
Tycho Andersen (AMD)
|
f995fc377a |
crypto/ccp: Implement SNP x86 shutdown
The SEV firmware has support to disable SNP during an SNP_SHUTDOWN_EX command. Verify that this support is available and set the flag so that SNP is disabled when it is not being used. In cases where SNP is disabled, skip the call to amd_iommu_snp_disable(), as all of the IOMMU pages have already been made shared. Also skip the panic case, since snp_shutdown() does IPIs. Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Link: https://patch.msgid.link/20260324161301.1353976-7-tycho@kernel.org |
||
|
Tycho Andersen (AMD)
|
7b2bc5f0ab |
x86/sev, crypto/ccp: Move HSAVE_PA setup to arch/x86/
Now that there is snp_prepare() that indicates when the CCP driver wants to prepare the architecture for SNP_INIT(_EX), move this architecture-specific bit of code to a more sensible place. Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://patch.msgid.link/20260324161301.1353976-6-tycho@kernel.org |
||
|
Tycho Andersen (AMD)
|
299933b118 |
x86/sev, crypto/ccp: Move SNP init to ccp driver
Use the new snp_prepare() to initialize SNP from the ccp driver instead of at boot time. This means that SNP is not enabled unless it is really going to be used (i.e. kvm_amd loads the ccp driver automatically). Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://patch.msgid.link/20260324161301.1353976-5-tycho@kernel.org |
||
|
Tycho Andersen (AMD)
|
35a89319f6 |
crypto: ccp - simplify sev_update_firmware()
sev_do_cmd() has its own command buffer (sev->cmd_buf) with the correct alignment, perms, etc. that it copies the command into, so prepending it to the firmware data is unnecessary. Switch sev_update_firmware() to using a stack allocated command in light of this copy, and drop all of the resulting pointer math. Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Guenter Roeck
|
5c52607c43 |
crypto: ccp - Fix leaking the same page twice
Commit |
||
|
Alper Ak
|
889b0e2721 |
crypto: ccp - Fix use-after-free on error path
In the error path of sev_tsm_init_locked(), the code dereferences 't'
after it has been freed with kfree(). The pr_err() statement attempts
to access t->tio_en and t->tio_init_done after the memory has been
released.
Move the pr_err() call before kfree(t) to access the fields while the
memory is still valid.
This issue reported by Smatch static analyser
Fixes:4be423572da1 ("crypto/ccp: Implement SEV-TIO PCIe IDE (phase1)")
Signed-off-by: Alper Ak <alperyasinak1@gmail.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
||
|
Ashish Kalra
|
8168a7b72b |
crypto: ccp - allow callers to use HV-Fixed page API when SEV is disabled
When SEV is disabled, the HV-Fixed page allocation call fails, which in
turn causes SFS initialization to fail.
Fix the HV-Fixed API so callers (for example, SFS) can use it even when
SEV is disabled by performing normal page allocation and freeing.
Fixes:
|
||
|
Linus Torvalds
|
bf4afc53b7 |
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Kees Cook
|
69050f8d6d |
treewide: Replace kmalloc with kmalloc_obj for non-scalar types
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
Linus Torvalds
|
f50822fd86 |
platform-drivers-x86 for v7.0-1
Highlights:
- amd/pmf:
- Avoid overwriting BIOS input values when events occur rapidly
- Fix PMF driver issues related to S4 (in part on crypto/ccp side)
- Add NPU metrics API (for accel side consumers)
- Allow disabling Smart PC function through a module parameter
- asus-wmi & HID/asus:
- Unification of backlight control (replaces quirks)
- Support multiple interfaces for controlling keyboard/RGB brightness
- Simplify init sequence
- hp-wmi:
- Add manual fan control for Victus S models
- Add fan mode keep-alive
- Fix platform profile values for Omen 16-wf1xxx
- Add EC offset to get the thermal profile
- intel/pmc: Show substate residencies also for non-primary PMCs
- intel/ISST:
- Store and restore data for all domains
- Write interface improvements
- lenovo-wmi:
- Support multiple Capability Data
- Add HWMON reporting and tuning support
- mellanox/mlx-platform: Add HI173 & HI174 support
- surface/aggregator_registry: Add Surface Pro 11 (QCOM)
- thinkpad_acpi: Add support for HW damage detection capability
- uniwill: Implement cTGP setting
- wmi:
- Introduce marshalling support
- Convert a few drivers to use the new buffer-based WMI API
- tools/power/x86/intel-speed-select: Allow read operations for non-root
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
amd/pmf:
- Added a module parameter to disable the Smart PC function
- Introduce new interface to export NPU metrics
- Prevent TEE errors after hibernate
- Use ring buffer to store custom BIOS input values
amd:
- Use scope-based cleanup for wbrf_record()
asus-wmi:
- add keyboard brightness event handler
- Add support for multiple kbd led handlers
- remove unused keyboard backlight quirk
crypto:
- ccp - Add an S4 restore flow
- ccp - Declare PSP dead if PSP_CMD_TEE_RING_INIT fails
- ccp - Factor out ring destroy handling to a helper
- ccp - Send PSP_CMD_TEE_RING_DESTROY when PSP_CMD_TEE_RING_INIT fails
HID: asus:
- add support for the asus-wmi brightness handler
- early return for ROG devices
- fortify keyboard handshake
- initialize additional endpoints only for certain devices
- listen to the asus-wmi brightness device instead of creating one
- move vendor initialization to probe
- simplify RGB init sequence
- use same report_id in response
hp-wmi:
- Add EC offsets to read Victus S thermal profile
- add manual fan control for Victus S models
- fix platform profile values for Omen 16-wf1xxx
- implement fan keep-alive
- order include headers
ideadpad-laptop:
- Clean up style warnings and checks
intel/pmc:
- Change LPM mode fields to u8
- Enable substate residencies for multiple PMCs
- Move LPM mode attributes to PMC
- Remove double empty line
intel/pmt:
- Replace sprintf() with sysfs_emit()
intel/uncore-freq:
- Replace sprintf() with scnprintf()
- Replace sprintf() with sysfs_emit()
intel-wmi-sbl-fw-update:
- Use new buffer-based WMI API
intel/wmi: thunderbolt:
- Use new buffer-based WMI API
ISST:
- Add missing write block check
- Check for admin capability for write commands
- Optimize suspend/resume callbacks
- Store and restore all domains data
lenovo-wmi-capdata:
- Add support for Capability Data 00
- Add support for Fan Test Data
lenovo-wmi-{capdata,other}:
- Fix HWMON channel visibility
- Support multiple Capability Data
lenovo-wmi-capdata:
- Wire up Fan Test Data
lenovo-wmi-helpers:
- Convert returned buffer into u32
lenovo-wmi-other:
- Add HWMON for fan reporting/tuning
mlx-platform:
- Add support DGX flavor of next-generation 800GB/s ethernet switch.
- Add support for new Nvidia DGX system based on class VMOD0010
Rename lenovo-wmi-capdata01 to lenovo-wmi-capdata:
- Rename lenovo-wmi-capdata01 to lenovo-wmi-capdata
surface: aggregator_registry:
- Add Surface Pro 11 (QCOM)
surface:
- Replace deprecated strcpy() in surface_button_add()
thinkpad_acpi:
- Add support to detect hardware damage detection capability.
- Add sysfs to display details of damaged device.
tools/power/x86/intel-speed-select:
- Allow non root users
- Fix file descriptor leak in isolate_cpus()
- Use pkg-config for libnl-3.0 detection
- v1.25 release
uniwill:
- Implement cTGP setting
uniwill-laptop:
- Introduce device descriptor system
wmi:
- Add helper functions for WMI string conversions
- Add kunit test for the marshalling code
- Add kunit test for the string conversion code
wmi-bmof:
- Use new buffer-based WMI API
wmi:
- Introduce marshalling support
wmi: string-kunit:
- Add missing oversized string test case
wmi:
- Update driver development guide
xiaomi-wmi:
- Use new buffer-based WMI API
yogabook:
- Clean up code style
Merges:
- Merge branch 'fixes' of into for-next
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into for-next
- Merge branch 'platform-drivers-x86-asus-kbd' into for-next
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaY9soAAKCRBZrE9hU+XO
MT5EAP9aK1wHlVGDfuC2k07X4gk8ZX5Ks9anXJlBcZFrpC9okwD5Aeqj3XLK338x
g5k/x+r87GwXjcBLnFi2TnNA2c8SWQY=
=eGAm
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"Highlights:
- amd/pmf:
- Avoid overwriting BIOS input values when events occur rapidly
- Fix PMF driver issues related to S4 (in part on crypto/ccp side)
- Add NPU metrics API (for accel side consumers)
- Allow disabling Smart PC function through a module parameter
- asus-wmi & HID/asus:
- Unification of backlight control (replaces quirks)
- Support multiple interfaces for controlling keyboard/RGB brightness
- Simplify init sequence
- hp-wmi:
- Add manual fan control for Victus S models
- Add fan mode keep-alive
- Fix platform profile values for Omen 16-wf1xxx
- Add EC offset to get the thermal profile
- intel/pmc: Show substate residencies also for non-primary PMCs
- intel/ISST:
- Store and restore data for all domains
- Write interface improvements
- lenovo-wmi:
- Support multiple Capability Data
- Add HWMON reporting and tuning support
- mellanox/mlx-platform: Add HI173 & HI174 support
- surface/aggregator_registry: Add Surface Pro 11 (QCOM)
- thinkpad_acpi: Add support for HW damage detection capability
- uniwill: Implement cTGP setting
- wmi:
- Introduce marshalling support
- Convert a few drivers to use the new buffer-based WMI API
- tools/power/x86/intel-speed-select: Allow read operations for non-root
- Miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (68 commits)
platform/x86: lenovo-wmi-{capdata,other}: Fix HWMON channel visibility
platform/x86: hp-wmi: Add EC offsets to read Victus S thermal profile
platform: mellanox: mlx-platform: Add support DGX flavor of next-generation 800GB/s ethernet switch.
platform: mellanox: mlx-platform: Add support for new Nvidia DGX system based on class VMOD0010
HID: asus: add support for the asus-wmi brightness handler
platform/x86: asus-wmi: add keyboard brightness event handler
platform/x86: asus-wmi: remove unused keyboard backlight quirk
HID: asus: listen to the asus-wmi brightness device instead of creating one
platform/x86: asus-wmi: Add support for multiple kbd led handlers
HID: asus: early return for ROG devices
HID: asus: move vendor initialization to probe
HID: asus: fortify keyboard handshake
HID: asus: use same report_id in response
HID: asus: initialize additional endpoints only for certain devices
HID: asus: simplify RGB init sequence
platform/wmi: string-kunit: Add missing oversized string test case
platform/x86/amd/pmf: Added a module parameter to disable the Smart PC function
platform/x86/uniwill: Implement cTGP setting
platform/x86: uniwill-laptop: Introduce device descriptor system
platform/x86/amd: Use scope-based cleanup for wbrf_record()
...
|
||
|
Linus Torvalds
|
08df88fa14 |
This update includes the following changes:
API:
- Fix race condition in hwrng core by using RCU.
Algorithms:
- Allow authenc(sha224,rfc3686) in fips mode.
- Add test vectors for authenc(hmac(sha384),cbc(aes)).
- Add test vectors for authenc(hmac(sha224),cbc(aes)).
- Add test vectors for authenc(hmac(md5),cbc(des3_ede)).
- Add lz4 support in hisi_zip.
- Only allow clear key use during self-test in s390/{phmac,paes}.
Drivers:
- Set rng quality to 900 in airoha.
- Add gcm(aes) support for AMD/Xilinx Versal device.
- Allow tfms to share device in hisilicon/trng.
-----BEGIN PGP SIGNATURE-----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=n4fL
-----END PGP SIGNATURE-----
Merge tag 'v7.0-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Fix race condition in hwrng core by using RCU
Algorithms:
- Allow authenc(sha224,rfc3686) in fips mode
- Add test vectors for authenc(hmac(sha384),cbc(aes))
- Add test vectors for authenc(hmac(sha224),cbc(aes))
- Add test vectors for authenc(hmac(md5),cbc(des3_ede))
- Add lz4 support in hisi_zip
- Only allow clear key use during self-test in s390/{phmac,paes}
Drivers:
- Set rng quality to 900 in airoha
- Add gcm(aes) support for AMD/Xilinx Versal device
- Allow tfms to share device in hisilicon/trng"
* tag 'v7.0-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (100 commits)
crypto: img-hash - Use unregister_ahashes in img_{un}register_algs
crypto: testmgr - Add test vectors for authenc(hmac(md5),cbc(des3_ede))
crypto: cesa - Simplify return statement in mv_cesa_dequeue_req_locked
crypto: testmgr - Add test vectors for authenc(hmac(sha224),cbc(aes))
crypto: testmgr - Add test vectors for authenc(hmac(sha384),cbc(aes))
hwrng: core - use RCU and work_struct to fix race condition
crypto: starfive - Fix memory leak in starfive_aes_aead_do_one_req()
crypto: xilinx - Fix inconsistant indentation
crypto: rng - Use unregister_rngs in register_rngs
crypto: atmel - Use unregister_{aeads,ahashes,skciphers}
hwrng: optee - simplify OP-TEE context match
crypto: ccp - Add sysfs attribute for boot integrity
dt-bindings: crypto: atmel,at91sam9g46-sha: add microchip,lan9691-sha
dt-bindings: crypto: atmel,at91sam9g46-aes: add microchip,lan9691-aes
dt-bindings: crypto: qcom,inline-crypto-engine: document the Milos ICE
crypto: caam - fix netdev memory leak in dpaa2_caam_probe
crypto: hisilicon/qm - increase wait time for mailbox
crypto: hisilicon/qm - obtain the mailbox configuration at one time
crypto: hisilicon/qm - remove unnecessary code in qm_mb_write()
crypto: hisilicon/qm - move the barrier before writing to the mailbox register
...
|
||
|
Linus Torvalds
|
13d83ea9d8 |
Crypto library updates for 7.0
- Add support for verifying ML-DSA signatures.
ML-DSA (Module-Lattice-Based Digital Signature Algorithm) is a
recently-standardized post-quantum (quantum-resistant) signature
algorithm. It was known as Dilithium pre-standardization.
The first use case in the kernel will be module signing. But there
are also other users of RSA and ECDSA signatures in the kernel that
might want to upgrade to ML-DSA eventually.
- Improve the AES library:
- Make the AES key expansion and single block encryption and
decryption functions use the architecture-optimized AES code.
Enable these optimizations by default.
- Support preparing an AES key for encryption-only, using about
half as much memory as a bidirectional key.
- Replace the existing two generic implementations of AES with a
single one.
- Simplify how Adiantum message hashing is implemented. Remove the
"nhpoly1305" crypto_shash in favor of direct lib/crypto/ support for
NH hashing, and enable optimizations by default.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaYlV8xQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK1ffAQCbM+cnqF4ThspBCgLZGSScx02KsA4U
dQblKoOFyIEbnwEA1ElJNhNQs2m7AT+R0hOh6yI+5+ttUfqLMT9tuNs2mwM=
=iZ06
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
- Add support for verifying ML-DSA signatures.
ML-DSA (Module-Lattice-Based Digital Signature Algorithm) is a
recently-standardized post-quantum (quantum-resistant) signature
algorithm. It was known as Dilithium pre-standardization.
The first use case in the kernel will be module signing. But there
are also other users of RSA and ECDSA signatures in the kernel that
might want to upgrade to ML-DSA eventually.
- Improve the AES library:
- Make the AES key expansion and single block encryption and
decryption functions use the architecture-optimized AES code.
Enable these optimizations by default.
- Support preparing an AES key for encryption-only, using about
half as much memory as a bidirectional key.
- Replace the existing two generic implementations of AES with a
single one.
- Simplify how Adiantum message hashing is implemented. Remove the
"nhpoly1305" crypto_shash in favor of direct lib/crypto/ support for
NH hashing, and enable optimizations by default.
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (53 commits)
lib/crypto: mldsa: Clarify the documentation for mldsa_verify() slightly
lib/crypto: aes: Drop 'volatile' from aes_sbox and aes_inv_sbox
lib/crypto: aes: Remove old AES en/decryption functions
lib/crypto: aesgcm: Use new AES library API
lib/crypto: aescfb: Use new AES library API
crypto: omap - Use new AES library API
crypto: inside-secure - Use new AES library API
crypto: drbg - Use new AES library API
crypto: crypto4xx - Use new AES library API
crypto: chelsio - Use new AES library API
crypto: ccp - Use new AES library API
crypto: x86/aes-gcm - Use new AES library API
crypto: arm64/ghash - Use new AES library API
crypto: arm/ghash - Use new AES library API
staging: rtl8723bs: core: Use new AES library API
net: phy: mscc: macsec: Use new AES library API
chelsio: Use new AES library API
Bluetooth: SMP: Use new AES library API
crypto: x86/aes - Remove the superseded AES-NI crypto_cipher
lib/crypto: x86/aes: Add AES-NI optimization
...
|
||
|
Mario Limonciello
|
90f7520b76 |
crypto: ccp - Add sysfs attribute for boot integrity
The boot integrity attribute represents that the CPU or APU is used for the hardware root of trust in the boot process. This bit only represents the CPU/APU and some vendors have other hardware root of trust implementations specific to their designs. Link: https://github.com/fwupd/fwupd/pull/9825 Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Alexey Kardashevskiy
|
c201226304 |
crypto/ccp: Allow multiple streams on the same root bridge
With SEV-TIO the low-level TSM driver is responsible for allocating a
Stream ID. The Stream ID needs to be unique within each IDE partner
port. Fix the Stream ID selection to reuse the host bridge stream
resource id which is a pool of 256 ids per host bridge on AMD platforms.
Otherwise, only one device per-host bridge can establish Selective
Stream IDE.
Fixes:
|
||
|
Alexey Kardashevskiy
|
403dd7da22 |
crypto/ccp: Use PCI bridge defaults for IDE
The current number of streams in AMD TSM is 1 which is too little,
the core uses 255. Also, even if the module parameter is increased,
calling pci_ide_set_nr_streams() second time triggers WARN_ON.
Simplify the code by sticking to the PCI core defaults.
Fixes:
|
||
|
Ella Ma
|
d5abcc33ee |
crypto: ccp - Fix a crash due to incorrect cleanup usage of kfree
Annotating a local pointer variable, which will be assigned with the
kmalloc-family functions, with the `__cleanup(kfree)` attribute will
make the address of the local variable, rather than the address returned
by kmalloc, passed to kfree directly and lead to a crash due to invalid
deallocation of stack address. According to other places in the repo,
the correct usage should be `__free(kfree)`. The code coincidentally
compiled because the parameter type `void *` of kfree is compatible with
the desired type `struct { ... } **`.
Fixes:
|
||
|
Tycho Andersen (AMD)
|
dc8ccab150 |
crypto: ccp - narrow scope of snp_range_list
snp_range_list is only used in __sev_snp_init_locked() in the SNP_INIT_EX
case, move the declaration there and add a __free() cleanup helper for it
instead of waiting until shutdown.
Fixes:
|
||
|
Tom Lendacky
|
551120148b |
crypto: ccp - Fix a case where SNP_SHUTDOWN is missed
If page reclaim fails in sev_ioctl_do_snp_platform_status() and SNP was
moved from UNINIT to INIT for the function, SNP is not moved back to
UNINIT state. Additionally, SNP is not required to be initialized in order
to execute the SNP_PLATFORM_STATUS command, so don't attempt to move to
INIT state and let SNP_PLATFORM_STATUS report the status as is.
Fixes:
|
||
|
Herbert Xu
|
1ab7c36600 |
crypto: ccp - Use NULL instead of plain 0
Use NULL instead of 0 as the null pointer. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Alexey Kardashevskiy <aik@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Mario Limonciello (AMD)
|
7b85137caf
|
crypto: ccp - Send PSP_CMD_TEE_RING_DESTROY when PSP_CMD_TEE_RING_INIT fails
The hibernate resume sequence involves loading a resume kernel that is just
used for loading the hibernate image before shifting back to the existing
kernel.
During that hibernate resume sequence the resume kernel may have loaded
the ccp driver. If this happens the resume kernel will also have called
PSP_CMD_TEE_RING_INIT but it will never have called
PSP_CMD_TEE_RING_DESTROY.
This is problematic because the existing kernel needs to re-initialize the
ring. One could argue that the existing kernel should call destroy
as part of restore() but there is no guarantee that the resume kernel did
or didn't load the ccp driver. There is also no callback opportunity for
the resume kernel to destroy before handing back control to the existing
kernel.
Similar problems could potentially exist with the use of kdump and
crash handling. I actually reproduced this issue like this:
1) rmmod ccp
2) hibernate the system
3) resume the system
4) modprobe ccp
The resume kernel will have loaded ccp but never destroyed and then when
I try to modprobe it fails.
Because of these possible cases add a flow that checks the error code from
the PSP_CMD_TEE_RING_INIT call and tries to call PSP_CMD_TEE_RING_DESTROY
if it failed. If this succeeds then call PSP_CMD_TEE_RING_INIT again.
Fixes:
|
||
|
Mario Limonciello (AMD)
|
d95f87a65b
|
crypto: ccp - Factor out ring destroy handling to a helper
The ring destroy command needs to be used in multiple places. Split out the code to a helper. Tested-by: Yijun Shen <Yijun.Shen@Dell.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://patch.msgid.link/20260116041132.153674-5-superm1@kernel.org Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
||
|
Mario Limonciello (AMD)
|
0ba2035026
|
crypto: ccp - Add an S4 restore flow
The system will have lost power during S4. The ring used for TEE
communications needs to be initialized before use.
Fixes:
|
||
|
Mario Limonciello (AMD)
|
5e599d7871
|
crypto: ccp - Declare PSP dead if PSP_CMD_TEE_RING_INIT fails
tee_init_ring() only declares PSP dead if the command times out.
If there is any other failure it is still considered fatal though.
Set psp_dead for other failures as well.
Fixes:
|
||
|
Eric Biggers
|
0f5f4961ae |
crypto: ccp - Use new AES library API
Switch from the old AES library functions (which use struct crypto_aes_ctx) to the new ones (which use struct aes_enckey). This eliminates the unnecessary computation and caching of the decryption round keys. The new AES en/decryption functions are also much faster and use AES instructions when supported by the CPU. Note that in addition to the change in the key preparation function and the key struct type itself, the change in the type of the key struct results in aes_encrypt() (which is temporarily a type-generic macro) calling the new encryption function rather than the old one. Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20260112192035.10427-27-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@kernel.org> |
||
|
Linus Torvalds
|
249872f53d |
tsm for 6.19
- Introduce the PCI/TSM core for the coordination of device
authentication, link encryption and establishment (IDE), and later
management of the device security operational states (TDISP). Notify
the new TSM core layer of PCI device arrival and departure.
- Add a low level TSM driver for the link encryption establishment
capabilities of the AMD SEV-TIO architecture.
- Add a library of helpers TSM drivers to use for IDE establishment and
the DOE transport.
- Add skeleton support for 'bind' and 'guest_request' operations in
support of TDISP.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCaTOdAwAKCRDfioYZHlFs
Z/fWAQDS5mwS/8rn0UdH/SijTm/oKVxdiyIQbTstrjk8AySITgEA5ki9w2iKa0WG
x1ACZKlo9gS9emyx4wuJpCBIMtR50Qc=
=B4oG
-----END PGP SIGNATURE-----
Merge tag 'tsm-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull PCIe Link Encryption and Device Authentication from Dan Williams:
"New PCI infrastructure and one architecture implementation for PCIe
link encryption establishment via platform firmware services.
This work is the result of multiple vendors coming to consensus on
some core infrastructure (thanks Alexey, Yilun, and Aneesh!), and
three vendor implementations, although only one is included in this
pull. The PCI core changes have an ack from Bjorn, the crypto/ccp/
changes have an ack from Tom, and the iommu/amd/ changes have an ack
from Joerg.
PCIe link encryption is made possible by the soup of acronyms
mentioned in the shortlog below. Link Integrity and Data Encryption
(IDE) is a protocol for installing keys in the transmitter and
receiver at each end of a link. That protocol is transported over Data
Object Exchange (DOE) mailboxes using PCI configuration requests.
The aspect that makes this a "platform firmware service" is that the
key provisioning and protocol is coordinated through a Trusted
Execution Envrionment (TEE) Security Manager (TSM). That is either
firmware running in a coprocessor (AMD SEV-TIO), or quasi-hypervisor
software (Intel TDX Connect / ARM CCA) running in a protected CPU
mode.
Now, the only reason to ask a TSM to run this protocol and install the
keys rather than have a Linux driver do the same is so that later, a
confidential VM can ask the TSM directly "can you certify this
device?".
That precludes host Linux from provisioning its own keys, because host
Linux is outside the trust domain for the VM. It also turns out that
all architectures, save for one, do not publish a mechanism for an OS
to establish keys in the root port. So "TSM-established link
encryption" is the only cross-architecture path for this capability
for the foreseeable future.
This unblocks the other arch implementations to follow in v6.20/v7.0,
once they clear some other dependencies, and it unblocks the next
phase of work to implement the end-to-end flow of confidential device
assignment. The PCIe specification calls this end-to-end flow Trusted
Execution Environment (TEE) Device Interface Security Protocol
(TDISP).
In the meantime, Linux gets a link encryption facility which has
practical benefits along the same lines as memory encryption. It
authenticates devices via certificates and may protect against
interposer attacks trying to capture clear-text PCIe traffic.
Summary:
- Introduce the PCI/TSM core for the coordination of device
authentication, link encryption and establishment (IDE), and later
management of the device security operational states (TDISP).
Notify the new TSM core layer of PCI device arrival and departure
- Add a low level TSM driver for the link encryption establishment
capabilities of the AMD SEV-TIO architecture
- Add a library of helpers TSM drivers to use for IDE establishment
and the DOE transport
- Add skeleton support for 'bind' and 'guest_request' operations in
support of TDISP"
* tag 'tsm-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm: (23 commits)
crypto/ccp: Fix CONFIG_PCI=n build
virt: Fix Kconfig warning when selecting TSM without VIRT_DRIVERS
crypto/ccp: Implement SEV-TIO PCIe IDE (phase1)
iommu/amd: Report SEV-TIO support
psp-sev: Assign numbers to all status codes and add new
ccp: Make snp_reclaim_pages and __sev_do_cmd_locked public
PCI/TSM: Add 'dsm' and 'bound' attributes for dependent functions
PCI/TSM: Add pci_tsm_guest_req() for managing TDIs
PCI/TSM: Add pci_tsm_bind() helper for instantiating TDIs
PCI/IDE: Initialize an ID for all IDE streams
PCI/IDE: Add Address Association Register setup for downstream MMIO
resource: Introduce resource_assigned() for discerning active resources
PCI/TSM: Drop stub for pci_tsm_doe_transfer()
drivers/virt: Drop VIRT_DRIVERS build dependency
PCI/TSM: Report active IDE streams
PCI/IDE: Report available IDE streams
PCI/IDE: Add IDE establishment helpers
PCI: Establish document for PCI host bridge sysfs attributes
PCI: Add PCIe Device 3 Extended Capability enumeration
PCI/TSM: Establish Secure Sessions and Link Encryption
...
|