mirror of
https://github.com/torvalds/linux.git
synced 2026-09-14 16:10:02 +02:00
185a4caeec
1472 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Pu Lehui
|
47e20d4b3d |
LoongArch: BPF: Fix memory leak in bpf_jit_free()
When bpf_int_jit_compile() is called for subprograms, it returns early
during the first pass (!prog->is_func || extra_pass is false), keeping
ctx->offset alive for the subsequent extra pass.
If JIT compilation fails for a later subprogram, the BPF core aborts and
calls bpf_jit_free() to clean up the first subprogram. However,
bpf_jit_free() fails to free jit_data->ctx.offset, which causes a memory
leak of the JIT context offsets array.
So fix this by adding the missing kvfree(jit_data->ctx.offset) in
bpf_jit_free().
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes:
|
||
|
Nicholas Dudar
|
dacd348b8a |
LoongArch: BPF: Zero-extend signed ALU32 div/mod results
ALU32 operations write a 32-bit result and leave the upper 32 bits of the BPF register zero. The LoongArch JIT sign-extends the result of signed ALU32 BPF_DIV and BPF_MOD (off=1), so a negative 32-bit quotient or remainder leaves bits 63:32 set in JITted code while the verifier and interpreter model those bits as zero. Keep sign-extension on the operands, which signed divide needs, and zero-extend the ALU32 result after the divide or modulo instruction, matching the unsigned ALU32 div/mod paths and every other ALU32 operation in this JIT. Fixes: |
||
|
Haoran Jiang
|
73555fdab5 |
LoongArch: Fix oops during single-step debugging
When entering KDB via a breakpoint and then performing single-step debugging, an oops is triggered. Now during single-step debugging, kdb_local() expects the reason to be KDB_REASON_SSTEP, but it is actually KDB_REASON_OOPS. In kdb_stub(), when determining the reason, the ex_vector for single-step should be 0, as already implemented on other architectures such as arm64 and riscv. Before the patch: [112]kdb> ss Entering kdb (current=0x900020009f520000, pid 10661) on processor 112 Oops: (null) due to oops @ 0x90000000005b57a4 Cc: stable@vger.kernel.org Signed-off-by: Haoran Jiang <jianghaoran@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
George Guo
|
485ed44db5 |
LoongArch: Fix address space mismatch in kexec command line lookup
When searching the loaded segments for the "kexec" command line marker,
the kexec_load(2) path (file_mode == 0) passes the user-space segment
buffer straight to strncmp() through a bogus (char __user *) cast. This
dereferences a user pointer in kernel context, which is wrong and is
flagged by sparse:
arch/loongarch/kernel/machine_kexec.c:84:51: sparse: incorrect type in
argument 2 (different address spaces) @@ expected char const * @@ got
char [noderef] __user *
Here copy the marker-sized prefix of each segment into a small on-stack
buffer with copy_from_user() before comparing, and skip segments that
fault. The subsequent copy_from_user() that stages the full command line
into the safe area is left unchanged.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Rong Bao
|
4e8f58620f |
LoongArch: Retrieve CPU package ID from PPTT when available
Currently, the LoongArch CPU topology initialization code calculates
each core's package ID by dividing its physical ID by loongson_sysconf.
cores_per_package. This relies on the assumption that cores_per_package
counts in the same domain as physical IDs.
On Loongson-3B6000 (XB612B0V_1.2), cores_per_package matches the visible
core count -- 24 in this case. However, the physical IDs range from 0 to
31 in a noncontinuous fashion:
$ cat /proc/cpuinfo | grep -i -F 'global_id'
global_id : 0
global_id : 1
global_id : 4
global_id : 5
global_id : 6
global_id : 7
global_id : 8
global_id : 9
global_id : 10
global_id : 11
global_id : 14
global_id : 15
global_id : 16
global_id : 17
global_id : 20
global_id : 21
global_id : 22
global_id : 23
global_id : 26
global_id : 27
global_id : 28
global_id : 29
global_id : 30
global_id : 31
Retrieve the exact package ID from ACPI PPTT when available, in the same
style as retrieving the core ID and thread ID in parse_acpi_topology().
Use this information in loongson_init_secondary() when the PPTT readout
is successful. The original division logic is kept as a fallback.
Meanwhile, since some existing code paths like loongson3_cpufreq expect
a continuous integer sequence of package IDs in [0, MAX_PACKAGES) when
retrieving from cpu_data[], here we also canonicalize the package ID to
be filled in parse_acpi_topology() to meet such an expectation.
Cc: stable@vger.kernel.org
Tested-by: Mingcong Bai <jeffbai@aosc.io>
Co-developed-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Rong Bao <rong.bao@csmantle.top>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
||
|
Kanglong Wang
|
ea68d444a6 |
LoongArch: Move jump_label_init() before parse_early_param()
When enabling both CONFIG_MEM_ALLOC_PROFILING=y and CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT=y, then diabling memory profiling by adding the boot parameter 'sysctl.vm.mem_profiling=0' will cause the kernel failed to boot. After analysis, this is because jump_label_init() must be called before parse_early_param(), the early param handlers may modify static keys by static_branch_enable/disable(). Fix this by moving jump_label_init() to before parse_early_param(). The solution is similar to other architectures. Cc: <stable@vger.kernel.org> Signed-off-by: Kanglong Wang <wangkanglong@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
7ea74820ed |
LoongArch: Fix build errors due to wrong instructions for 32BIT
In some assembly files there are some instructions that only valid for 64BIT, but those files can be compiled for 32BIT and cause build errors. So, replace those instructions with macros: li.d --> LONG_LI (li.w or li.d), addi.d --> PTR_ADDI (addi.w or addi.d). BTW, Re-tab the indention in the assembly files for alignment. Cc: stable@vger.kernel.org # 6.19+ Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Huacai Chen
|
7917d16d14 |
LoongArch: Increase TASK_STRUCT_OFFSET up to 2040 for 32BIT
THREAD_INFO_IN_TASK increase the size of task_struct, which casuses a build error for the 32BIT kernel if RANDSTRUCT is enabled. So increase TASK_STRUCT_OFFSET as big as possible (2040), but can still be aligned and be fit in the addi.w instruction. Cc: stable@vger.kernel.org Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Linus Torvalds
|
d2c9a99135 |
Split <linux/mod_devicetable.h> in per subsystem headers
<linux/mod_devicetable.h> is included transitively in nearly every
driver in an x86_64 allmodconfig build of v7.1:
$ find drivers -name \*.o -not -name \*.mod.o | wc -l
21330
$ find drivers -name \*.o.cmd -not -name \*.mod.o.cmd | xargs grep -l mod_devicetable.h | wc -l
17038
The result of this mixture of different and unrelated subsystem details
is that even when touching an obscure device id struct most of the
kernel needs to be recompiled. Given that each driver typically only
needs one or two of these structures, splitting into per subsystem
headers and only including what is really needed reduces the amount of
needed recompilation.
This split is implemented in the first commit and then after some
preparatory work in the following commits, the last two replace
includes of <linux/mod_devicetable.h> by the actually needed more
specific headers. There are still a few instances left, but the ones
with high impact (that is in headers that are used a lot) and the easy
ones (.c files) are handled. These remaining includes will be addressed
during the next merge window.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmpHSvIACgkQj4D7WH0S
/k6Rdgf/QqxMIt7DEAN6KvyCnwVnNnvEWQhac/DtYA3NF1JaynieJIoFcimrRr/j
cntxjz2zlMhLH4CYZ87IunZ7nGZgkMlsnl/OVMm5NY0wq0vVYX6VmpiSvhMAgvjV
QxKHOAyuVqPslwVE8DF2Vh9mgJILviH5t/yIy8DHF85QBrDSjcd/n6csx09uTjIy
+D6NuxQ7ZeOi+O2wZuiDhYpD1kwgO1sXAg56ogN1OSTQoo1kkKqj66b5fgbPVm4/
MX3EBOjKIytX8csfWBJjNSB7aRyWVMkMKmmDO9+7MIq6tPRbc3yYwhu2kZBAw5Pt
mQfy1oyUi+0jwew4yKHeoVLyWAc4bg==
=YhFg
-----END PGP SIGNATURE-----
Merge tag 'device-id-rework' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull mod_devicetable.h header split from Uwe Kleine-König:
"Split <linux/mod_devicetable.h> in per subsystem headers
<linux/mod_devicetable.h> is included transitively in nearly every
driver in an x86_64 allmodconfig build of v7.1:
$ find drivers -name \*.o -not -name \*.mod.o | wc -l
21330
$ find drivers -name \*.o.cmd -not -name \*.mod.o.cmd | xargs grep -l mod_devicetable.h | wc -l
17038
The result of this mixture of different and unrelated subsystem
details is that even when touching an obscure device id struct most of
the kernel needs to be recompiled. Given that each driver typically
only needs one or two of these structures, splitting into per
subsystem headers and only including what is really needed reduces the
amount of needed recompilation.
This split is implemented in the first commit and then after some
preparatory work in the following commits, the last two replace
includes of <linux/mod_devicetable.h> by the actually needed more
specific headers.
There are still a few instances left, but the ones with high impact
(that is in headers that are used a lot) and the easy ones (.c files)
are handled. These remaining includes will be addressed during the
next merge window"
* tag 'device-id-rework' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
Replace <linux/mod_devicetable.h> by more specific <linux/device-id/*.h> (c files)
Replace <linux/mod_devicetable.h> by more specific <linux/device-id/*.h> (headers)
parisc: #include <linux/compiler.h> for unlikely() in <asm/ptrace.h>
media: em28xx: Add include for struct usb_device_id
LoongArch: KVM: Add include defining struct cpu_feature
ALSA: hda/core: Add include defining struct hda_device_id
usb: dwc2: Add include defining struct pci_device_id
platform/x86: int3472: Add include defining struct dmi_system_id
platform/x86: x86-android-tablets: Add include defining struct dmi_system_id
i2c: Let i2c-core.h include <linux/i2c.h>
of: Explicitly include <linux/types.h> and <linux/err.h>
platform/x86: msi-ec: Ensure dmi_system_id is defined
usb: serial: Include <linux/usb.h> in <linux/usb/serial.h>
driver core: platform: Include header for struct platform_device_id
driver: core: Include headers for acpi_device_id and of_device_id for struct device_driver
media: ti: vpe: #include <linux/platform_device.h> explicitly
mod_devicetable.h: Split into per subsystem headers
|
||
|
Uwe Kleine-König (The Capable Hub)
|
995832b2ce |
Replace <linux/mod_devicetable.h> by more specific <linux/device-id/*.h> (c files)
Replace the #include of <linux/mod_devicetable.h> by the more specific <linux/device-id/*.h> where applicable. For most cases the include can be dropped completely, only a few drivers need one or two headers added. Acked-by: Danilo Krummrich <dakr@kernel.org> Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com> |
||
|
Uwe Kleine-König (The Capable Hub)
|
a59fbb8cef |
LoongArch: KVM: Add include defining struct cpu_feature
Traditionally <linux/mod_devicetable.h> was a header defining a plethora of structs, among them struct cpu_features. This was split now with the objective that only the relevant bits are included. Currently <linux/mod_devicetable.h> is transitively included in arch/loongarch/kvm/main.c via: arch/loongarch/kvm/main.c -> <linux/kvm_host.h> -> <linux/entry-virt.h> -> <linux/resume_user_mode.h> -> <linux/memcontrol.h> -> <linux/cgroup.h> -> <linux/kernel_stat.h> -> <linux/interrupt.h> -> <linux/hardirq> -> <asm/hardirq.h> -> <linux/irq.h> -> <asm/irq.h> -> <linux/irqdomain.h> -> <linux/of.h> -> <linux/mod_devicetable.h> To keep struct cpu_features available once <linux/of.h> stops including <linux/mod_devicetable.h>, include it here explicitly. Acked-by: Danilo Krummrich <dakr@kernel.org> Reviewed-by: Bibo Mao <maobibo@loongson.cn> Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://patch.msgid.link/052feec0e04ea8f5b2706a19a5b236679eed0aba.1782808461.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com> |
||
|
Linus Torvalds
|
51512e22ef |
BPF fixes:
- Initialize task local storage before fork bails out to free the task (Jann Horn) - Fix insn_aux_data leak on verifier error path (KaFai Wan) - Reject BPF inode storage map creation when BPF LSM is uninitialized (Matt Bobrowski) - Mask pseudo pointer values in verifier logs when pointer leaks are not allowed (Nuoqi Gui) - Harden BPF JIT against spraying via IBPB flush (Pawan Gupta) - Reject a skb-modifying SK_SKB stream parser since the latter is only meant to measure the next message (Sechang Lim) - Fix bpf_refcount_acquire to reject refcounted allocation arguments with a non-zero fixed offset (Yiyang Chen) Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> -----BEGIN PGP SIGNATURE----- iIsEABYKADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCaka0NhUcZGFuaWVsQGlv Z2VhcmJveC5uZXQACgkQ2yufC7HISIMPywD/ePh+eOZjFwXy88kOdNa2qmKLuTQm nv6jPDOEafVDfbUA/R0qT9t+144K5Ig1NU58uR9vMIevqWRjLrnQtWU7KI0D =4aKP -----END PGP SIGNATURE----- Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Pull BPF fixes from Daniel Borkmann: - Initialize task local storage before fork bails out to free the task (Jann Horn) - Fix insn_aux_data leak on verifier error path (KaFai Wan) - Reject BPF inode storage map creation when BPF LSM is uninitialized (Matt Bobrowski) - Mask pseudo pointer values in verifier logs when pointer leaks are not allowed (Nuoqi Gui) - Harden BPF JIT against spraying via IBPB flush (Pawan Gupta) - Reject a skb-modifying SK_SKB stream parser since the latter is only meant to measure the next message (Sechang Lim) - Fix bpf_refcount_acquire to reject refcounted allocation arguments with a non-zero fixed offset (Yiyang Chen) * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Prefer dirty packs for eBPF allocations bpf: Prefer packs that won't trigger an IBPB flush on allocation bpf: Skip redundant IBPB in pack allocator bpf: Restrict JIT predictor flush to cBPF x86/bugs: Enable IBPB flush on BPF JIT allocation bpf: Support for hardening against JIT spraying bpf: Reject BPF_MAP_TYPE_INODE_STORAGE creation if BPF LSM is uninitialized bpf,fork: wipe ->bpf_storage before bailouts that access it bpf: Fix insn_aux_data leak on verifier err_free_env path selftests/bpf: Cover pseudo-BTF ksym log masking bpf: Mask pseudo pointer values in verifier logs selftests/bpf: Cover refcount acquire node offsets bpf: Reject offset refcount acquire arguments selftests/bpf: test rejection of a packet-modifying SK_SKB stream parser bpf, sockmap: reject a packet-modifying SK_SKB stream parser selftests/bpf: don't modify the skb in the strparser parser prog |
||
|
Pawan Gupta
|
0bb99f2cfa |
bpf: Restrict JIT predictor flush to cBPF
Currently predictor flush on memory reuse is done for all BPF JIT allocations, but only cBPF programs can be loaded by an unprivileged user. eBPF is privileged by default, and flushing predictors for all CPUs on every eBPF reuse penalizes the common case for no security benefit. eBPF allocations can be frequent on busy systems, only flush predictors for cBPF programs. Trampoline and dispatcher allocations also skip the flush as they are eBPF-only. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> |
||
|
Linus Torvalds
|
51cb1aa125 |
LoongArch changes for v7.2
1, Add THREAD_INFO_IN_TASK implementation;
2, Add build salt to the vDSO;
3, Add some BPF JIT inline helpers;
4, Update DTS for I2C clocks and clock-frequency;
5, Some bug fixes and other small changes.
-----BEGIN PGP SIGNATURE-----
iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmo+MBYWHGNoZW5odWFj
YWlAa2VybmVsLm9yZwAKCRAChivD8uImesGWD/9HygPT6/JFvFR2rijLaym9TNYi
+X8m0GTUJDrBGasDQ1rXSgUAkWKIQHEvx0Q947HYWhceiIrwbiZrgMStVapk40hd
/WsiuTHFaiVzjiiXf2bdTSr9uWHIon3P1EZ6zkmdRO4l2VsvAq2elMJXazIP7NUa
fTnTGAMPXvA/TinNXZqGq/Ny9c6gp63pVUgATcBpSUmYCNYGz6xx7OwSWyGV0ncq
Kfxm87nVq6wdyCgmrzfYSGze9vM0FxfFpzvZbX9vLOfGZBGaxzDcBjH9LRU09vyp
/9fNpacKT49yNOfLO3R3MHSPFSa5DCg8ph8CDfMnqPmP01SfZpC+zmlFWv23ojx5
4v47fyaRQu6ucKL2vxkIJfKO6l8bXgcuzVgZPGVt5q5yJ5O+7yhuamncrxUKk6Ol
KGpIEJM3iKbcHKr9GF0EUcgJkbA2J/pU/094snBU3HlkoHDVcp28XxlJmNtW+jY4
49dCTbX/5v+680uf/KTUyXJ4j3m9bxMOB6feE1uVaSJF1nx6f7WYHRg7A/1pXnWy
f2chgwR4eUeqZRpFlUhcLx4R+OOD2ORvvdM0qcNv4T7E8FD31JtFVD873R2iFEG8
AlKG4Ln3DUeJdhskXXmJRIDD5nZb9XZNYlnM4ghQLBas5dtSxsSPnzkSjJHirTjR
naFFT9xxRBQOBBTrjQ==
=EvQG
-----END PGP SIGNATURE-----
Merge tag 'loongarch-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Add THREAD_INFO_IN_TASK implementation
- Add build salt to the vDSO
- Add some BPF JIT inline helpers
- Update DTS for I2C clocks and clock-frequency
- Some bug fixes and other small changes
* tag 'loongarch-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
selftests/bpf: Test jited inline of bpf_get_smp_processor_id() for LoongArch
selftests/bpf: Test jited inline of bpf_get_current_task() for LoongArch
selftests/bpf: Add __arch_loongarch to limit test cases for LoongArch
selftests/bpf: Add get_preempt_count() support for LoongArch
LoongArch: dts: Add i2c clocks and clock-frequency properties to LS2K2000
LoongArch: dts: Add i2c clocks and clock-frequency properties to LS2K1000
LoongArch: dts: Add i2c clocks and clock-frequency properties to LS2K0500
LoongArch: BPF: Inline bpf_get_smp_processor_id() helper
LoongArch: BPF: Inline bpf_get_current_task/_btf() helpers
LoongArch: BPF: Fix off-by-one error in tail call
LoongArch: BPF: Fix outdated tail call comments
LoongArch: Add build salt to the vDSO
LoongArch: Fix nr passing in set_direct_map_valid_noflush()
LoongArch: Fix missing dirty page tracking in {pte,pmd}_wrprotect()
LoongArch: Move struct kimage forward declaration before use
LoongArch: Report dying CPU to RCU in stop_this_cpu()
LoongArch: Add PIO for early access before ACPI PCI root register
LoongArch: Add THREAD_INFO_IN_TASK implementation
|
||
|
Hongliang Wang
|
eae0693d13 |
LoongArch: dts: Add i2c clocks and clock-frequency properties to LS2K2000
Add missing clocks and clock-frequency properties to i2c nodes for LS2K2000. Signed-off-by: Hongliang Wang <wanghongliang@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Hongliang Wang
|
0526f3ea9f |
LoongArch: dts: Add i2c clocks and clock-frequency properties to LS2K1000
Add missing clocks and clock-frequency properties to i2c nodes for LS2K1000. Signed-off-by: Hongliang Wang <wanghongliang@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Hongliang Wang
|
bb3c90fe34 |
LoongArch: dts: Add i2c clocks and clock-frequency properties to LS2K0500
Add missing clocks and clock-frequency properties to i2c nodes for LS2K0500. Signed-off-by: Hongliang Wang <wanghongliang@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
68571a63f2 |
LoongArch: BPF: Inline bpf_get_smp_processor_id() helper
The pointer to thread_info is always available in the $tp register, so
the call to bpf_get_smp_processor_id() can be inlined into a single load
instruction.
(1) Here is the sample test.c:
#include <linux/bpf.h>
#include <bpf/bpf_helpers.h>
SEC("raw_tp/sys_enter")
int test_cpuid(void *ctx)
{
return bpf_get_smp_processor_id();
}
char _license[] SEC("license") = "GPL";
(2) Here are the test steps:
sudo yum install libbpf-devel kernel-devel bpftool
clang -target bpf -O2 -c test.c -o test.o
sudo sysctl -w net.core.bpf_jit_enable=1
sudo bpftool prog show name test_cpuid
sudo rm -f /sys/fs/bpf/test_cpuid
sudo bpftool prog load test.o /sys/fs/bpf/test_cpuid
ID=$(sudo bpftool prog show pinned /sys/fs/bpf/test_cpuid | grep -oE '^[0-9]+')
sudo bpftool prog dump jited id $ID
(3) Here are the test results:
Before: 6 instructions
...
64: lu12i.w $t1, 1213
68: ori $t1, $t1, 1680
6c: lu32i.d $t1, 0
70: lu52i.d $t1, $t1, -1792
74: jirl $ra, $t1, 0
78: move $a5, $a0
...
After: 1 instruction
...
64: ld.wu $a5, $tp, 16
...
This is similar with commit
|
||
|
Tiezhu Yang
|
7f5c21fcd7 |
LoongArch: BPF: Inline bpf_get_current_task/_btf() helpers
The pointer to task_struct is always available in the $tp register, so
the calls to bpf_get_current_task() and bpf_get_current_task_btf() can
be inlined into a single move instruction.
(1) Here is the sample test.c:
#include <linux/bpf.h>
#include <bpf/bpf_helpers.h>
SEC("raw_tp/sys_enter")
long test_task(void *ctx)
{
return (long)bpf_get_current_task();
}
char _license[] SEC("license") = "GPL";
(2) Here are the test steps:
sudo yum install libbpf-devel kernel-devel bpftool
clang -target bpf -O2 -c test.c -o test.o
sudo sysctl -w net.core.bpf_jit_enable=1
sudo bpftool prog show name test_task
sudo rm -f /sys/fs/bpf/test_task
sudo bpftool prog load test.o /sys/fs/bpf/test_task
ID=$(sudo bpftool prog show pinned /sys/fs/bpf/test_task | grep -oE '^[0-9]+')
sudo bpftool prog dump jited id $ID
(3) Here are the test results:
Before: 6 instructions
...
64: lu12i.w $t1, 1093
68: ori $t1, $t1, 3320
6c: lu32i.d $t1, 0
70: lu52i.d $t1, $t1, -1792
74: jirl $ra, $t1, 0
78: move $a5, $a0
...
After: 1 instruction
...
64: move $a5, $tp
...
This is similar with commit
|
||
|
Tiezhu Yang
|
0379d10f09 |
LoongArch: BPF: Fix off-by-one error in tail call
The current code updates the tail call counter (TCC) using a pre-increment
approach, it stores the incremented value back to memory before performing
any boundary or target validation checks.
This causes two major issues:
1. When a tail call fails because the target program is NULL, the TCC is
incorrectly incremented and saved in memory anyway.
2. This dummy increment implicitly consumes one slot of the allowed tail
call budget. As a result, the subsequent loop reaches the maximum limit
prematurely, leading to a test failure where the actual loop count is
32 instead of the expected 33.
Fix this by deferring the counter update. Change the branch condition to
BPF_JSGE (greater or equal) so that we check the boundary first. The TCC
is only incremented and stored back to memory after the boundary check
and the NULL-target check both pass.
Before:
$ sudo ./test_progs -t tailcalls/tailcall_3
...
test_tailcall_count:FAIL:tailcall count unexpected tailcall count: actual 32 != expected 33
...
#465/3 tailcalls/tailcall_3:FAIL
#465 tailcalls:FAIL
After:
$ sudo ./test_progs -t tailcalls/tailcall_3
#465/3 tailcalls/tailcall_3:OK
#465 tailcalls:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Fixes:
|
||
|
Tiezhu Yang
|
25d9127bb0 |
LoongArch: BPF: Fix outdated tail call comments
The current LoongArch BPF JIT implementation hardcodes the number of
prologue instructions skipped during a tail call as a magic number '7'
in the jirl instruction. However, the accompanying comment explaining
this offset is completely outdated. It inaccurately states that only
a single TCC initialization instruction is bypassed, but in reality,
multiple setup slots are skipped, so fix these outdated comments in
__build_epilogue().
While at it, refine the comments in build_prologue() to describe the
skipped setup slots (RA saving, fentry nops, and the TCC register slot)
using proper dynamic tracing context. Also, remove the magic number '7'
by introducing descriptive macros to formally define the prologue layout
and make the tail call jump offset self-documenting.
Fixes:
|
||
|
Bastian Blank
|
c2bd59bf44 |
LoongArch: Add build salt to the vDSO
The vDSO needs to have a unique build id in a similar manner to the kernel and modules. Use the build salt macro. Signed-off-by: Bastian Blank <waldi@debian.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Xuewen Wang
|
70378a7105 |
LoongArch: Fix nr passing in set_direct_map_valid_noflush()
set_direct_map_valid_noflush() incorrectly passes 1 to __set_memory()
instead of nr. This causes only the first page's attr to be updated when
nr > 1.
Other architectures all pass nr correctly.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Hongchen Zhang
|
018e9828eb |
LoongArch: Fix missing dirty page tracking in {pte,pmd}_wrprotect()
When hardware page table walker (PTW) is enabled on LoongArch, the CPU
may set _PAGE_DIRTY directly in the page table entry during a write TLB
miss, without going through the software TLB store handler. The software
TLB store handler (tlbex.S:254) sets both _PAGE_DIRTY and_PAGE_MODIFIED
together:
ori t0, t0, (_PAGE_VALID | _PAGE_DIRTY | _PAGE_MODIFIED)
Since hardware PTW only sets _PAGE_DIRTY, the software-only bit, i.e.
_PAGE_MODIFIED is left unchanged. This creates a window where a PTE has
_PAGE_DIRTY set (hardware knows the page is dirty) but _PAGE_MODIFIED
clear (software is unaware).
When fork()/clone() triggers copy-on-write, __copy_present_ptes() calls
pte_wrprotect(), which unconditionally clears both the _PAGE_WRITE and
_PAGE_DIRTY bits:
pte_val(pte) &= ~(_PAGE_WRITE | _PAGE_DIRTY);
Since _PAGE_MODIFIED was never set, the dirtiness information is lost
completely. Subsequently, when memory pressure triggers page reclaim,
page_mkclean() / try_to_unmap() sees the page as clean (i.e. pte_dirty()
returns false) and the page may be freed without writeback, causing data
corruption.
Fix this by propagating the _PAGE_DIRTY bit to the _PAGE_MODIFIED bit in
both pte_wrprotect() and pmd_wrprotect() before clearing writeable bits:
if (pte_val(pte) & _PAGE_DIRTY)
pte_val(pte) |= _PAGE_MODIFIED;
The pmd_wrprotect() fix handles the CONFIG_TRANSPARENT_HUGEPAGE case,
where pmd entries need the same treatment.
This ensures the software dirty tracking bit (checked by pte_dirty() and
pmd_dirty(), which read both the _PAGE_DIRTY and _PAGE_MODIFIED bits) is
preserved across fork COW write-protection.
The issue was found by the LTP madvise09 test case, which exercises page
reclaim after "madvise(MADV_FREE), write and fork" operation sequence on
private anonymous mappings.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
谢致邦 (XIE Zhibang)
|
d4e58d2c21 |
LoongArch: Move struct kimage forward declaration before use
arch_kimage_file_post_load_cleanup() and load_other_segments(), both
inside the CONFIG_KEXEC_FILE block, take a struct kimage pointer before
the forward declaration appears. Move the forward declaration above so
it precedes its first use instead of relying on a transitive include.
Fixes:
|
||
|
Huacai Chen
|
f2539c56c7 |
LoongArch: Report dying CPU to RCU in stop_this_cpu()
This is a port of MIPS commit |
||
|
Huacai Chen
|
6061e65f95 |
LoongArch: Add PIO for early access before ACPI PCI root register
For ACPI system we suppose the ISA/LPC PIO range is registered together with PCI root bridge. But the fact is there may be some early access to the ISA/LPC PIO range before ACPI PCI root register (most of them are due to abnormal BIOS). Unconditionally register the ISA/LPC PIO range usually causes ACPI PCI root register fail because of the address range confliction. So we add a pair of helpers: acpi_add_early_pio() to add PIO for early access, and acpi_remove_early_pio() to remove PIO before PCI root register. Since acpi_remove_early_pio() may be called multiple times, we add an acpi_pio flag to ensure PIO be removed only once. Cc: <stable@vger.kernel.org> Tested-by: Yuanzhen Gan <elysia-best@simplelinux.cn.eu.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
7b5944d6ed |
LoongArch: Add THREAD_INFO_IN_TASK implementation
Like other architectures such as x86, arm64, riscv, powerpc and s390, select THREAD_INFO_IN_TASK for LoongArch to move thread_info off the stack into task_struct. This follows modern kernel standards and also makes the system more secure. With this patch, thread_info is included in task_struct at an offset of 0 instead of being placed at the bottom of the kernel stack. Thus, the $tp register points to both thread_info and task_struct. To support this, introduce a per-CPU variable cpu_tasks to store the pointer to the current task_struct. This decouples the recovery of the $tp register from the stack pointer during exception entry. Then initialize cpu_tasks for the primary and secondary CPUs during arch-specific setup and SMP boot paths. To eliminate the dangerous windows during the early initialization where the cpu_tasks remains uninitialized, set_current() is invoked as early as possible in both setup_arch() and start_secondary(). This ensures the $tp recovery barrier is armed in case any early boot exceptions or kernel panics occur. Modify SAVE_SOME and handle_syscall to restore the $tp register from cpu_tasks, and also use the la_abs absolute addressing for cpu_tasks access in assembly to bypass the relocation limits within exception handling sections. By advancing the preservation of u0 in SAVE_SOME, we reuse the PERCPU_BASE_KS value in u0 for the cpu_tasks calculation, effectively eliminating a duplicate csrrd instruction execution on SMP platforms. Update <asm/switch_to.h> and <kernel/switch.S> to fully support the CONFIG_THREAD_INFO_IN_TASK feature. Remove the obsolete next_ti argument from __switch_to(), which shifts the remaining arguments ahead in the calling convention (sched_ra from a3 to a2, and sched_cfa from a4 to a3). Under the new configuration, __switch_to() now directly derives the thread pointer ($tp) from the next task_struct pointer in a1. To preserve the optimal and clean "move tp, a1" path for 64-bit kernels, the thread pointer ($tp) is assigned directly from a1 in the core path. For 32-bit kernels, where a1 carries a 2000-byte structural pointer bias at entry, an explicit adjustment "PTR_ADDI tp, tp, -TASK_STRUCT_OFFSET" is introduced at the function exit. In the context of __switch_to(), local interrupts are disabled, and the kernel is in a critical switching phase where handling any synchronous exception is practically impossible and prohibited. If any synchronous exception or watchpoint does trigger in this narrow window, it constitutes a fatal double fault and the kernel is expected to die/panic immediately anyway. Therefore, the temporary biased value in $tp is safe and acceptable here. Additionally, evaluate the stack lookup as a single load instruction "LONG_LPTR t0, a1, (TASK_STACK - TASK_STRUCT_OFFSET)", this perfectly satisfies both 32-bit and 64-bit kernels. Using the "next" pointer in a1 as the base register, rather than $tp, effectively unchains the data dependency (RAW hazard) from the preceding move instruction, maximizing the instruction-level parallelism and superscalar execution efficiency while naturally adapting the structural shift. With CONFIG_THREAD_INFO_IN_TASK enabled, the kernel stack life cycle is decoupled from task_struct and can be freed concurrently. Currently, show_stacktrace() reads raw stack data via __get_addr() and subsequently calls show_backtrace() to unwind the frame, without holding any reference to the target task's stack. If show_stacktrace() is called on a concurrently exiting task, it could attempt to read from a freed or reallocated kernel stack. This introduces a severe use-after-free (UAF) read risk or kernel panics. Wrap the entire stack inspection process inside show_stacktrace() with a try_get_task_stack() and put_task_stack() pair. This ensures the task stack remains pinned safely during both the raw stack data dump loop and the subsequent stack unwinding phase. Also, ensure that the task pointer is initialized to "current" early if it is NULL, so that try_get_task_stack() always operates on a valid task reference. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Linus Torvalds
|
2e05544060 |
mm.git review status for mm-hotfixes-stable..mm-nonmm-stable
Everything:
Total patches: 108
Reviews/patch: 0.84
Reviewed rate: 75%
Patch series in this merge:
- The 2 patch series "taskstats: fix TGID dead-thread stat retention"
from Yiyang Chen fixes a taskstats TGID aggregation bug where fields
added in the TGID query path were not preserved after thread exit, and
adds a kselftest covering the regression.
- The 2 patch series "lib/tests: string_helpers: Slight improvements"
from Andy Shevchenko improves lib/tests/string_helpers_kunit.c a little.
- The 2 patch series "lib/base64: decode fixes" from Josh Law addreesses
minor issues in lib/base64.c.
- The 3 patch series "selftests/filelock: Make output more kselftestish"
from Mark Brown makes the output from the ofdlocks test a bit easier for
tooling to work with, and also ignores the generated file.
- The 3 patch series "uaccess: unify inline vs outline
copy_{from,to}_user() selection" from Yury Norov simplifies the usercopy
code by removing the selectability of inlining copy_{from,to}_user().
- The 5 patch series "ocfs2: validate inline xattr header consumers"
from ZhengYuan Huang fixes a number of possible issues in the ocfs2
xattr code.
- The 8 patch series "lib and lib/cmdline enhancements" from Dmitry
Antipov provides additional robustness checking in the cmdline handling
code and its in-kernel testing and selftests.
- The 18 patch series "cleanup the RAID6 P/Q library" from Christoph
Hellwig cleans up the RAID6 P/Q library to match the recent updates to
the RAID 5 XOR library and other CRC/crypto libraries.
- The 3 patch series "ocfs2: harden inode validators against forged
metadata" from Michael Bommarito adds three structural checks to OCFS2
dinode validation so malformed on-disk fields are rejected before
ocfs2_populate_inode() copies them into the in-core inode.
- The 2 patch series "lib/raid: replace __get_free_pages() call with
kmalloc()" from Mike Rapoport cleans up the lib/raid code by using
kmalloc() in more places.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCajgeIQAKCRDdBJ7gKXxA
jmlWAQCLJVDZNJMFaXy4a+YHdu3tfemLpSy83A0Le61tOZUdBQD/Sf/7rhgeaM74
32yp53TZLA8xHImCGEin/1ddPJ8DbgY=
=GW2I
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2026-06-21-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "taskstats: fix TGID dead-thread stat retention" (Yiyang Chen)
Fix a taskstats TGID aggregation bug where fields added in the TGID
query path were not preserved after thread exit, and adds a kselftest
covering the regression.
- "lib/tests: string_helpers: Slight improvements" (Andy Shevchenko)
Improve lib/tests/string_helpers_kunit.c a little
- "lib/base64: decode fixes" (Josh Law)
Address minor issues in lib/base64.c
- "selftests/filelock: Make output more kselftestish" (Mark Brown)
Make the output from the ofdlocks test a bit easier for tooling to
work with. Also ignore the generated file
- "uaccess: unify inline vs outline copy_{from,to}_user() selection"
(Yury Norov)
Simplify the usercopy code by removing the selectability of inlining
copy_{from,to}_user().
- "ocfs2: validate inline xattr header consumers" (ZhengYuan Huang)
Fix a number of possible issues in the ocfs2 xattr code
- "lib and lib/cmdline enhancements" (Dmitry Antipov)
Provide additional robustness checking in the cmdline handling code
and its in-kernel testing and selftests
- "cleanup the RAID6 P/Q library" (Christoph Hellwig)
Clean up the RAID6 P/Q library to match the recent updates to the
RAID 5 XOR library and other CRC/crypto libraries
- "ocfs2: harden inode validators against forged metadata" (Michael
Bommarito)
Add three structural checks to OCFS2 dinode validation so malformed
on-disk fields are rejected before ocfs2_populate_inode() copies them
into the in-core inode
- "lib/raid: replace __get_free_pages() call with kmalloc()" (Mike
Rapoport)
Clean up the lib/raid code by using kmalloc() in more places
* tag 'mm-nonmm-stable-2026-06-21-10-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (108 commits)
ocfs2: fix circular locking dependency in ocfs2_dio_end_io_write
ocfs2: fix NULL h_transaction deref in ocfs2_assure_trans_credits
lib: interval_tree_test: validate benchmark parameters
ocfs2: avoid moving extents to occupied clusters
treewide: fix transposed "sign" typos and update spelling.txt
ocfs2: fix UBSAN array-index-out-of-bounds in ocfs2_sum_rightmost_rec
fat: reject BPB volumes whose data area starts beyond total sectors
selftests/uevent: increase __UEVENT_BUFFER_SIZE to avoid ENOBUFS on busy systems
lib/test_firmware: allocate the configured into_buf size
fs: efs: remove unneeded debug prints
checkpatch: cuppress warnings when Reported-by: is followed by Link:
MAINTAINERS: add Alexander as a kcov reviewer
mailmap: update Alexander Sverdlin's Email addresses
fs: fat: inode: replace sprintf() with scnprintf()
ocfs2: fix out-of-bounds write in ocfs2_remove_refcount_extent
ocfs2: fix race between ocfs2_control_install_private() and ocfs2_control_release()
ocfs2/dlm: require a ref for locking_state debugfs open
ocfs2: reject FITRIM ranges shorter than a cluster
ocfs2: validate fast symlink target during inode read
ocfs2: add journal NULL check in ocfs2_checkpoint_inode()
...
|
||
|
Linus Torvalds
|
a552c81ff4 |
mm.git review status for mm-hotfixes-stable..mm-stable
Everything:
Total patches: 321
Reviews/patch: 1.52
Reviewed rate: 68%
Excluding DAMON:
Total patches: 227
Reviews/patch: 2.07
Reviewed rate: 90%
Excluding DAMON and selftests:
Total patches: 203
Reviews/patch: 2.14
Reviewed rate: 91%
Patchsets in this merge:
- The 2 patch series "selftests/mm: clean up build output and verbosity"
from Li Wang removes some noise from the MM selftests build out.
- The 3 patch series "mm: Free contiguous order-0 pages efficiently"
from Ryan Roberts speeds up the freeing of a batch of 0-order pages by
first scanning them for coalescing opportunities. This is applicable to
vfree() and to the releasing of frozen pages.
- The 11 patch series "mm/damon: introduce DAMOS failed region quota
charge ratio" from SeongJae Park addresses a DAMOS usability issue: The
DAMOS quota often exhausts prematurely because it charges for all memory
attempted, causing slow and inconsistent performance when actions fail
on unreclaimable memory.
To fix this, a new feature lets users set a smaller, flexible quota
charge ratio (via a numerator and denominator) for failed regions.
Since failed actions cause less overhead, reducing their quota cost
ensures more predictable and efficient DAMOS processing
- The 8 patch series "selftests/cgroup: improve zswap tests robustness
and support large page sizes" from Li Wang fixes various spurious
failures and improves the overall robustness of the cgroup zswap
selftests.
- The 3 patch series "fix MAP_DROPPABLE not supported errno" from
Anthony Yznaga fixes an issue in the mlock selftests on arm32.
- The 2 patch series "mm: huge_memory: clean up defrag sysfs with
shared" from Breno Leitao does some maintenance work in the huge_memory
code.
- The 3 patch series "treewide: fixup gfp_t printks" from Brendan
Jackman uses the special vprintf() gfp_t conversion in various places.
- The 6 patch series "mm: Fix vmemmap optimization accounting and
initialization" from Muchun Song fixes several bugs in the vmemmap
optimization, mainly around incorrect page accounting and memmap
initialization in the DAX and memory hotplug paths. It also fixes
pageblock migratetype initialization and struct page initialization for
ZONE_DEVICE compound pages.
- The 4 patch series "mm/damon: repost non-hotfix reviewed patches in
damon/next tree" from is a sprinkle of unrelated minor bugfixes for
DAMON.
- The 3 patch series "mm: remove page_mapped()" from David Hildenbrand
remove this function from the tree, replacing it with folio_mapped().
- The 10 patch series "mm/damon: let DAMON be paused and resumed" from
SeongJae Park permits DAMON to be paused and resumed without losing its
current state.
- The 3 patch series "kasan: hw_tags: Disable tagging for stack and
page-tables" from Muhammad Usama Anjum simplifies and speeds up kasan by
removing its ineffective tagging of stacks and page tables.
- The 7 patch series "mm/damon/reclaim,lru_sort: monitor all system rams
by default" from SeongJae Park simplifies deployment on diverse hardware
like NUMA systems by updating DAMON_RECLAIM and DAMON_LRU_SORT to
automatically monitor the physical address range covering all System RAM
areas by default, replacing the overly restrictive behavior that only
targeted the single largest memory block to save on negligible overhead.
- The 2 patch series "mm/damon/sysfs: document filters/ directory as
deprecated" from SeongJae Park updates some DAMON docs.
- The 8 patch series "mm: use spinlock guards for zone lock" from Dmitry
Ilvokhin switches zone->lock handling over to using the guard()
mechanisms.
- The 2 patch series "mm/filemap: tighten mmap_miss hit accounting" from
fujunjie fixes a flaw where the mmap_miss counter over-credited page
cache hits during fault-arounds and page-fault retries. This results in
significant reduction of redundant synchronous mmap readahead I/O,
drastically cutting down execution time and gigabytes read for sparse
random or strided memory access workloads.
- The 2 patch series "selftests/cgroup: Fix false positive failures in
test_percpu_basic" from Li Wang fixes a couple of false-positives in the
cgroup kmem selftests.
- The 2 patch series "mm/damon/reclaim: support monitoring intervals
auto-tuning" from SeongJae Park adds a new parameter to DAMON permitting
DAMON_RECLAIM to automatically tune DAMON's sampling and aggregation
intervals.
- The 2 patch series "mm/damon/stat: add kdamond_pid parameter" from
SeongJae Park chnges DAMON_STAT to provide the pid of its kdamond.
- The 2 patch series "mm/kmemleak: dedupe verbose scan output" from
Breno Leitao removes large amounts of duplicated backtraces from the
verbose-mode kmemleak output.
- The 8 patch series "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part 1)"
from David Hildenbrand reduces our use of CONFIG_HAVE_BOOTMEM_INFO_NODE,
with a view to removing it entirely in a later series.
- The 2 patch series "mm/damon: validate min_region_size to be power of
2" from Liew Rui Yan prevents users from passing a non-power-of-2 value
of `addr_unit', as this later results in undesirable behavior.
- The 2 patch series "mm: document read_pages and simplify usage" from
Frederick Mayle does as claimed.
- The 3 patch series "tools/mm/page-types: Fix misc bugs" from Ye Liu
fixes three issues in tools/mm/page-types.c.
- The 4 patch series "mm: misc cleanups from __GFP_UNMAPPED series" from
Brendan Jackman implements several cleanups in the page allocator and
related code.
- The 12 patch series "mm, swap: swap table phase IV: unify allocation"
from Kairui Song unifies the allocation and charging of anon and shmem
swap in folios, provides better synchronization, consolidates the
metadata management, hence dropping the static array and map, and
improves performance.
- The 28 patch series "mm/damon: introduce data attributes monitoring"
from SeongJae Park extends DAMON for monitoring general data attributes
other than accesses.
- The 5 patch series "mm/vmalloc: free unused pages on vrealloc()
shrink" from Shivam Kalra implements the TODO in vrealloc() to unmap and
free unused pages when shrinking across a page boundary.
- The 3 patch series "mm/damon: documentation and comment fixes" from
niecheng does as advertised.
- The 3 patch series "remove mmap_action success, error hooks" from
Lorenzo Stoakes eliminates custom hooks from mmap_action by removing the
problematic success_hook which allowed drivers to improperly access
uninitialized VMAs. It replaces the error_hook with a simple error-code
field and updates the memory char driver accordingly.
- The 14 patch series "mm/damon: minor improvements for code readability
and tests" from SeongJae Park implements minor improvements in code
readability and tests for DAMON.
- The 2 patch series "mm/damon: fix macro arguments and clarify quota
goals doc" from Maksym Shcherba does those things.
- The 2 patch series "userfaultfd: merge fs/userfaultfd.c into
mm/userfaultfd.c" from Mike Rapoport performs that code movement.
- The 15 patch series "mm/mglru: improve reclaim loop and dirty folio"
from Kairui Song and others cleans up and slightly improves MGLRU's
reclaim loop and dirty writeback handling. Large performance
improvements are measured.
- The 3 patch series "use vma locks for proc/pid/{smaps|numa_maps}
reads" from Suren Baghdasaryan uses per-vma locks when reading
/proc/pid/smaps and /proc/pid/numa_maps similar to reduce contention on
central mmap_lock.
- The 2 patch series "refactors thpsize_shmem_enabled_store() and
thpsize_shmem_enabled_show()" from Ran Xiaokai provides some cleanup
work in the THP code.
- The 2 patch series "selftests/memfd: fix compilation warnings" from
Konstantin Khorenko fixes a few build glitches in the memfd selftest
code.
- The 4 patch series "memcg: shrink obj_stock_pcp and cache multiple
objcgs" from Shakeel Butt resolves a 68% performance regression caused
by NUMA-node cache thrashing around struct obj_stock_pcp by shrinking
its existing fields and expanding it into a multi-slot array that caches
up to five obj_cgroup pointers per CPU, allowing per-node variants of
the same memcg to coexist within a single 64-byte cache line.
- The 2 patch series "zram: writeback fixes" from Sergey Senozhatsky
addresses a couple of unrelated zram writeback issues.
- The 9 patch series "mm: switch THP shrinker to list_lru" from Johannes
Weiner resolves NUMA-awareness issues and streamlines callsite
interaction by refactoring and extending the list_lru API to completely
replace the complex, open-coded deferred split queue for Transparent
Huge Pages (THPs).
- The 2 patch series "mm: improve large folio readahead for exec memory"
from Usama Arif improves large-folio readahead on systems like 64K-page
arm64 by preventing the mmap_miss check from permanently disabling
target-oriented VM_EXEC readahead, and by generalizing the
force_thp_readahead gate to support mappings with any usefully large
maximum folio order under the cache cap.
- The 6 patch series "userfaultfd/pagemap: pre-existing fixes" from
Kiryl Shutsemau fixes a bunch of minor issues in the
userfaultfd/pagemap, all of which were flagged by Sashiko review of
proposed new material.
- The 5 patch series "mm/sparse-vmemmap: Provide generic
vmemmap_set_pmd() and vmemmap_check_pmd()" from Muchun Song provides
generic versions of these two functions so the four arch-specific
implementations can be removed.
- The 2 patch series "mm/swap, PM: hibernate: fix swapoff race in
uswsusp by pinning swap device" from Youngjun Park addresses a
uswsusp-vs-swapoff race and reduces the swap device reference
taking/releasing frequency.
- The 2 patch series "mm/hmm: A fix and a selftest" from Dev Jain does
as claimed.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCajQcWQAKCRDdBJ7gKXxA
jkjFAQD14ZCAS7c/lsNHPRpOARR2zrCJiIp+vhZDEx5V+d8u0QD+I4ca11CnQ+OA
dKCeabWWYuTR1GDtTHbLVCRfpGexBwM=
=cWPO
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2026-06-18-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "selftests/mm: clean up build output and verbosity" (Li Wang)
Remove some noise from the MM selftests build
- "mm: Free contiguous order-0 pages efficiently" (Ryan Roberts)
Speed up the freeing of a batch of 0-order pages by first scanning
them for coalescing opportunities. This is applicable to vfree() and
to the releasing of frozen pages
- "mm/damon: introduce DAMOS failed region quota charge ratio"
(SeongJae Park)
Address a DAMOS usability issue: The DAMOS quota often exhausts
prematurely because it charges for all memory attempted, causing slow
and inconsistent performance when actions fail on unreclaimable
memory.
To fix this, a new feature lets users set a smaller, flexible quota
charge ratio (via a numerator and denominator) for failed regions.
Since failed actions cause less overhead, reducing their quota cost
ensures more predictable and efficient DAMOS processing
- "selftests/cgroup: improve zswap tests robustness and support large
page sizes" (Li Wang)
Fix various spurious failures and improves the overall robustness of
the cgroup zswap selftests
- "fix MAP_DROPPABLE not supported errno" (Anthony Yznaga)
Fix an issue in the mlock selftests on arm32
- "mm: huge_memory: clean up defrag sysfs with shared" (Breno Leitao)
Some maintenance work in the huge_memory code
- "treewide: fixup gfp_t printks" (Brendan Jackman)
Use the special vprintf() gfp_t conversion in various places
- "mm: Fix vmemmap optimization accounting and initialization" (Muchun
Song)
Fix several bugs in the vmemmap optimization, mainly around incorrect
page accounting and memmap initialization in the DAX and memory
hotplug paths. It also fixes pageblock migratetype initialization and
struct page initialization for ZONE_DEVICE compound pages
- "mm/damon: repost non-hotfix reviewed patches in damon/next tree"
A sprinkle of unrelated minor bugfixes for DAMON
- "mm: remove page_mapped()" (David Hildenbrand)
Remove this function from the tree, replacing it with folio_mapped()
- "mm/damon: let DAMON be paused and resumed" (SeongJae Park)
Allow DAMON to be paused and resumed without losing its current state
- "kasan: hw_tags: Disable tagging for stack and page-tables" (Muhammad
Usama Anjum)
Simplify and speed up kasan by removing its ineffective tagging of
stacks and page tables
- "mm/damon/reclaim,lru_sort: monitor all system rams by default"
(SeongJae Park)
Simplify deployment on diverse hardware like NUMA systems by updating
DAMON_RECLAIM and DAMON_LRU_SORT to automatically monitor the
physical address range covering all System RAM areas by default,
replacing the overly restrictive behavior that only targeted the
single largest memory block to save on negligible overhead
- "mm/damon/sysfs: document filters/ directory as deprecated" (SeongJae
Park)
Update some DAMON docs
- "mm: use spinlock guards for zone lock" (Dmitry Ilvokhin)
Switch zone->lock handling over to using the guard() mechanisms
- "mm/filemap: tighten mmap_miss hit accounting" (fujunjie)
Fix a flaw where the mmap_miss counter over-credited page cache hits
during fault-arounds and page-fault retries. This results in
significant reduction of redundant synchronous mmap readahead I/O,
drastically cutting down execution time and gigabytes read for sparse
random or strided memory access workloads
- "selftests/cgroup: Fix false positive failures in test_percpu_basic"
(Li Wang)
Fix a couple of false-positives in the cgroup kmem selftests
- "mm/damon/reclaim: support monitoring intervals auto-tuning"
(SeongJae Park)
Add a new parameter to DAMON permitting DAMON_RECLAIM to
automatically tune DAMON's sampling and aggregation intervals
- "mm/damon/stat: add kdamond_pid parameter" (SeongJae Park)
Change DAMON_STAT to provide the pid of its kdamond
- "mm/kmemleak: dedupe verbose scan output" (Breno Leitao)
Remove large amounts of duplicated backtraces from the verbose-mode
kmemleak output
- "mm: remove CONFIG_HAVE_BOOTMEM_INFO_NODE (Part 1)" (David
Hildenbrand)
Reduce our use of CONFIG_HAVE_BOOTMEM_INFO_NODE, with a view to
removing it entirely in a later series
- "mm/damon: validate min_region_size to be power of 2" (Liew Rui Yan)
Prevent users from passing a non-power-of-2 value of `addr_unit', as
this later results in undesirable behavior
- "mm: document read_pages and simplify usage" (Frederick Mayle)
- "tools/mm/page-types: Fix misc bugs" (Ye Liu)
Fix three issues in tools/mm/page-types.c
- "mm: misc cleanups from __GFP_UNMAPPED series" (Brendan Jackman)
Implement several cleanups in the page allocator and related code
- "mm, swap: swap table phase IV: unify allocation" (Kairui Song)
Unify the allocation and charging of anon and shmem swap in folios,
provides better synchronization, consolidates the metadata
management, hence dropping the static array and map, and improves
performance
- "mm/damon: introduce data attributes monitoring" (SeongJae Park(
Extend DAMON to monitor general data attributes other than accesses
- "mm/vmalloc: free unused pages on vrealloc() shrink" (Shivam Kalra)
Implement the TODO in vrealloc() to unmap and free unused pages when
shrinking across a page boundary
- "mm/damon: documentation and comment fixes" (niecheng)
- "remove mmap_action success, error hooks" (Lorenzo Stoakes)
Eliminate custom hooks from mmap_action by removing the problematic
success_hook which allowed drivers to improperly access uninitialized
VMAs. It replaces the error_hook with a simple error-code field and
updates the memory char driver accordingly
- "mm/damon: minor improvements for code readability and tests"
(SeongJae Park)
- "mm/damon: fix macro arguments and clarify quota goals doc" (Maksym
Shcherba)
- "userfaultfd: merge fs/userfaultfd.c into mm/userfaultfd.c" (Mike
Rapoport)
- "mm/mglru: improve reclaim loop and dirty folio" (Kairui Song and
others)
Clean up and slightly improves MGLRU's reclaim loop and dirty
writeback handling. Large performance improvements are measured
- "use vma locks for proc/pid/{smaps|numa_maps} reads" (Suren
Baghdasaryan)
Use per-vma locks when reading /proc/pid/smaps and numa_maps similar
to reduce contention on central mmap_lock
- "refactors thpsize_shmem_enabled_store() and thpsize_shmem_enabled_show()"
(Ran Xiaokai)
Some cleanup work in the THP code
- "selftests/memfd: fix compilation warnings" (Konstantin Khorenko)
Fix a few build glitches in the memfd selftest code.
- "memcg: shrink obj_stock_pcp and cache multiple objcgs" (Shakeel
Butt)
Resolve a 68% performance regression caused by NUMA-node cache
thrashing around struct obj_stock_pcp by shrinking its existing
fields and expanding it into a multi-slot array that caches up to
five obj_cgroup pointers per CPU, allowing per-node variants of the
same memcg to coexist within a single 64-byte cache line.
- "zram: writeback fixes" (Sergey Senozhatsky)
address a couple of unrelated zram writeback issues
- "mm: switch THP shrinker to list_lru" (Johannes Weiner)
Resolve NUMA-awareness issues and streamlines callsite interaction by
refactoring and extending the list_lru API to completely replace the
complex, open-coded deferred split queue for Transparent Huge Pages
- "mm: improve large folio readahead for exec memory" (Usama Arif)
Improve large-folio readahead on systems like 64K-page arm64 by
preventing the mmap_miss check from permanently disabling
target-oriented VM_EXEC readahead, and by generalizing the
force_thp_readahead gate to support mappings with any usefully large
maximum folio order under the cache cap.
- "userfaultfd/pagemap: pre-existing fixes" (Kiryl Shutsemau)
Fix a bunch of minor issues in the userfaultfd/pagemap, all of which
were flagged by Sashiko review of proposed new material
- "mm/sparse-vmemmap: Provide generic vmemmap_set_pmd() and
vmemmap_check_pmd()" (Muchun Song)
Provide generic versions of these two functions so the four
arch-specific implementations can be removed.
- "mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap
device" (Youngjun Park)
Address a uswsusp-vs-swapoff race and reduces the swap device
reference taking/releasing frequency.
- "mm/hmm: A fix and a selftest" (Dev Jain)
* tag 'mm-stable-2026-06-18-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
selftests/mm/hmm-tests: test pagemap reads of PMD device-private entries
fs/proc/task_mmu: do not warn on seeing non-migration pmd entry
lib/test_hmm: check alloc_page_vma() return value and handle OOM
mm/compaction: cap compact_gap() at COMPACT_CLUSTER_MAX
mm/swap: remove redundant swap device reference in alloc/free
mm/swap, PM: hibernate: fix swapoff race in uswsusp by pinning swap device
mm/filemap: use folio_next_index() for start
vmalloc: fix NULL pointer dereference in is_vm_area_hugepages()
sparc/mm: drop vmemmap_check_pmd helper and use generic code
loongarch/mm: drop vmemmap_check_pmd helper and use generic code
riscv/mm: drop vmemmap_pmd helpers and use generic code
arm64/mm: drop vmemmap_pmd helpers and use generic code
mm/sparse-vmemmap: provide generic vmemmap_set_pmd() and vmemmap_check_pmd()
rust: page: mark Page::nid as inline
userfaultfd: build __VMA_UFFD_FLAGS from config-gated masks
userfaultfd: gate must_wait writability check on pte_present()
mm/huge_memory: preserve pmd_swp_uffd_wp on device-private PMD downgrade
fs/proc/task_mmu: fix hugetlb self-deadlock in pagemap_scan_pte_hole()
fs/proc/task_mmu: use huge_page_size() in pagemap_scan_hugetlb_entry()
fs/proc/task_mmu: fix make_uffd_wp_huge_pte() prot-update race
...
|
||
|
Linus Torvalds
|
c98d767b34 |
Arm:
"This is a bit of an odd merge window on the KVM/arm64 front. There is
absolutely no new feature in the pull request. It is purely fixes,
because it is simply becoming too hard to review new stuff when so
many AI-fuelled fixes hit the list".
- Significant cleanup of the vgic-v5 PPI support which was merged in
7.1. This makes the code more maintainable, and squashes a couple
of bugs in the meantime.
- Set of fixes for the handling of the MMU in an NV context,
particularly VNCR-triggered faults. S1POE support is fixed
as well.
- Large set of pKVM fixes, mostly addressing recurring issues
around hypervisor tracking of donated pages in obscure cases
where the donation could fail and leave things in a bizarre
state.
- Fixes for the so-called "lazy vgic init", which resulted in
sleeping operations in non-preemptible sections. This turned
out to be far more invasive than initially expected...
- Reduce the overhead of L1/L2 context switch by not touching
the FP registers.
- Fix the way non-implemented page sizes are dealt with when
a guest insist on using them for S2 translation.
- The usual set of low-impact fixes and cleanups all over the map.
Loongarch:
- On a request for lazy FPU load, load all FPU state that the VM
supports instead of enabling only the part (FPU, LSX or LASX)
that caused the FPU load request.
- Some enhancements about interrupt injection.
- Some bug fixes and other small changes.
RISC-V:
- Batch G-stage TLB flushes for GPA range based page table updates
- Convert HGEI line management to fully per-HART
- Fix missing CSR dirty marking when FWFT state updated via ONE_REG
- Fix stale FWFT feature exposure to Guest/VM
- Speed up dirty logging write faults using MMU rwlock and atomic
PTE updates using cmpxchg() for permission-only changes
- Use flexible array for APLIC IRQ state
- Use kvm_slot_dirty_track_enabled() for logging enable check on
a memslot
- Avoid skipping valid pages in kvm_riscv_gstage_wp_range()
- Avoid skipping valid pages in kvm_riscv_gstage_unmap_range()
- Use endian-specific __lelong for NACL shared memory
S390:
- KVM_PRE_FAULT_MEMORY support
- Support for 2G hugepages
- Support for the ASTFLEIE 2 facility
- Support for fast inject using kvm_arch_set_irq_inatomic
- Fix potential leak of uninitialized bytes
- A few more misc gmap fixes.
x86:
- Generic support for the more granular permissions allowed by EPT,
namely "read" (which was previously usurping the U bit) and
separate execution bits for kernel and userspace.
- Do not assume that all page tables start with U=1/W=1/NX=0 at the
root, as AMD GMET needs to have U=0 at the root.
- Introduce common assembly macros for use within Intel and AMD
vendor-specific vmentry code. This touches the SPEC_CTRL handling,
which is now entirely done in assembly for Intel (by reusing the
AMD code that already existed), and register save/restore which
uses some macro magic to compute the offsets in the struct. Both
of these are preparatory changes for upcoming APX support.
- Clean up KVM's register tracking and storage, primarily to prepare for
APX support, which expands the maximum number of GPRs from 16 to 32.
- Keep a single copy of the PDPTRs rather than two, since architecturally
there is just one.
- Handle EXIT_FASTPATH_EXIT_USERSPACE in vendor code to ensure vendor code
gets a chance to handle things like reaping the PML buffer.
- Update KVM's view of PV async enabling if and only if the MSR write fully
succeeds.
- Fix a variety of issues where the emulator doesn't honor guest-debug state,
and clean up related code along the way.
- Synthesize EPT Violation and #NPF "error code" bits when injecting faults
into L1 that didn't originate in hardware (in which case the VMCS/VMCB
doesn't hold relevant information).
- Add support for virtualizing (well, emulating) AMD's flavor of CPL>0 CPUID
faulting.
- Clean up the GPR APIs so that KVM's use of "raw" is consistent, and fix a
variety of minor bugs along the way.
- Fix an OOB memory access due to not checking the VP ID when handling a
Hyper-V PV TLB flush for L2.
- Fix a bug in the mediated PMU's handling of fixed counters that allowed the
guest to bypass the PMU event filter.
- Allow userspace to return EAGAIN when handling SNP and TDX hypercalls, so
the KVM can forward a "retry" status code to the guest, and reserve all
unused error codes for future usage.
- Overhaul the TDP MMU => S-EPT code to move as much S-EPT specific logic as
possible into the TDX code, and to funnel (almost) all S-EPT updates into
a single chokepoint. The motivation is largely to prepare for upcoming
Dynamic PAMT support, but the cleanups are nice to have on their own.
- Plug a hole in shadow page table handling, where KVM fails to recursively
zap nested EPT/NPT shadow page tables when the nested hypervisor tears
down its own EPT/NPT page tables from the bottom up
x86 (Intel):
- Support for nested MBEC (Mode-Based Execute Control), see above in the
generic section; also run with MBEC enabled even for non-nested mode.
- Use the kernel's "enum pg_level" in the TDX APIs instead of the TDX-Module's
level definitions (which are 0-based).
- Rework the TDX memory APIs to not require/assume that guest memory is
backed by "struct page" (in prepartion for guest_memfd hugepage support).
- Fix a largely benign bug where KVM TDX would incorrectly state it could
emulate several x2APIC MSRs.
- Use the "safe" WRMSR API when proxying LBR MSR writes as the to-be-written
value is guest controlled and completely unvalidated.
x86 (AMD):
- Support for nested GMET (Guest Mode Execution Trap), see above in the
generic section; also run with GMET enabled even for non-nested mode.
- Fixes and minor cleanups to GHCB handling, on top of the earlier work
already merged into 7.1-rc.
- Ensure KVM's copy of CR0 and CR3 are up-to-date prior to invoking
fastpath handlers.
- Add support for virtualizing gPAT (KVM previously just used L1's PAT when
running L2).
- Fix goofs where KVM mishandles side effects (e.g. single-step and PMC
updates) when emulating VMRUN.
- Fix a variety of bugs in AVIC's handling of x2APIC MSR interception, most
notably where KVM didn't disable interception of IRR, ISR, and TMR regs.
- Add support for virtualizing Host-Only/Guest-Only bits in the mediated PMU.
- Don't advertise support for unusable VM types, and account for VM types
that are disabled by firmware, e.g. to mitigate security vulnerabilities.
- Rewrite the SEV {en,de}crypt debug ioctls as they were riddle with bugs and
unnecessarily complicated, and add comprehensive tests.
- Clean up and deduplicate the SEV page pinning code.
- Fix minor goofs related to writing back CPUID information after firmware
rejects a CPUID page for an SNP vCPU.
Generic:
- Rename invalidate_begin() to invalidate_start() throughout KVM to follow
the kernel's nomenclature, e.g. for mmu_notifiers.
- Use guard() to cleanup up various KVM+VFIO flows.
- Minor cleanups.
guest_memfd:
- Return -EEXIST instead of -EINVAL if userspace attempts to bind a gmem
range to multiple memslots, and fix the test that was supposed to ensure
KVM returns -EEXIST.
- Treat memslot binding offsets and sizes as unsigned values to fix a bug
where KVM interprets a large "offset + size" as a negative value and allows
a nonsensical offset.
- Use the inode number instead of the page offset for the NUMA interleaving
index to fix a bug where the effective index would jump by two for
consecutive pages (the caller also adds in the page offset).
Selftests:
- Randomize the dirty log test's delay when reaping the bitmap on the first
pass, as always waiting only 1ms hid a KVM RISC-V bug as the test reaped the
bitmap before KVM could build up enough state to hit the bug.
- A pile of one-off fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmoypI0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNCSAf8CyuvicojnZGFsNcoY4DZ0whBj5l8
IwVkHaptuyGLSwPAebC/DwtU2NBY4CQdbtLjGmxenf+fSQOtcz1YWKbdY4Nr0hJG
euAb/wO47RqKp1C4WPi7lL2P4XHgmUgD5XZ1qDnRV9gnGddZi3QLLmKgAtNq9Z4m
+pAdGD2/RyZeI0Dx61+5ufE/z8YBlH6GrzgBTxfvvRNKqNDFykBenxYHI7seEfHC
BPz0LxjHDD8BMDUo86qaylZnaeQSmFTGO/eTgvCvabxG6WbM1s0w3K1owmUmP7o3
p9o8274Xh53iK2JYD/qGOtAJXejIwbYKT5bnvUQX0O1EH2+ouvSFapLQ9Q==
=sSqM
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"arm64:
This is a bit of an odd merge window on the KVM/arm64 front. There
is absolutely no new feature in the pull request. It is purely
fixes, because it is simply becoming too hard to review new stuff
when so many AI-fuelled fixes hit the list.
- Significant cleanup of the vgic-v5 PPI support which was merged in
7.1. This makes the code more maintainable, and squashes a couple
of bugs in the meantime
- Set of fixes for the handling of the MMU in an NV context,
particularly VNCR-triggered faults. S1POE support is fixed as well
- Large set of pKVM fixes, mostly addressing recurring issues around
hypervisor tracking of donated pages in obscure cases where the
donation could fail and leave things in a bizarre state
- Fixes for the so-called "lazy vgic init", which resulted in
sleeping operations in non-preemptible sections. This turned out to
be far more invasive than initially expected..
- Reduce the overhead of L1/L2 context switch by not touching the FP
registers
- Fix the way non-implemented page sizes are dealt with when a guest
insist on using them for S2 translation
- The usual set of low-impact fixes and cleanups all over the map
Loongarch:
- On a request for lazy FPU load, load all FPU state that the VM
supports instead of enabling only the part (FPU, LSX or LASX) that
caused the FPU load request
- Some enhancements about interrupt injection
- Some bug fixes and other small changes
RISC-V:
- Batch G-stage TLB flushes for GPA range based page table updates
- Convert HGEI line management to fully per-HART
- Fix missing CSR dirty marking when FWFT state updated via ONE_REG
- Fix stale FWFT feature exposure to Guest/VM
- Speed up dirty logging write faults using MMU rwlock and atomic PTE
updates using cmpxchg() for permission-only changes
- Use flexible array for APLIC IRQ state
- Use kvm_slot_dirty_track_enabled() for logging enable check on a
memslot
- Avoid skipping valid pages in kvm_riscv_gstage_wp_range()
- Avoid skipping valid pages in kvm_riscv_gstage_unmap_range()
- Use endian-specific __lelong for NACL shared memory
S390:
- KVM_PRE_FAULT_MEMORY support
- Support for 2G hugepages
- Support for the ASTFLEIE 2 facility
- Support for fast inject using kvm_arch_set_irq_inatomic
- Fix potential leak of uninitialized bytes
- A few more misc gmap fixes
x86:
- Generic support for the more granular permissions allowed by EPT,
namely "read" (which was previously usurping the U bit) and
separate execution bits for kernel and userspace
- Do not assume that all page tables start with U=1/W=1/NX=0 at the
root, as AMD GMET needs to have U=0 at the root
- Introduce common assembly macros for use within Intel and AMD
vendor-specific vmentry code. This touches the SPEC_CTRL handling,
which is now entirely done in assembly for Intel (by reusing the
AMD code that already existed), and register save/restore which
uses some macro magic to compute the offsets in the struct. Both of
these are preparatory changes for upcoming APX support
- Clean up KVM's register tracking and storage, primarily to prepare
for APX support, which expands the maximum number of GPRs from 16
to 32
- Keep a single copy of the PDPTRs rather than two, since
architecturally there is just one
- Handle EXIT_FASTPATH_EXIT_USERSPACE in vendor code to ensure vendor
code gets a chance to handle things like reaping the PML buffer
- Update KVM's view of PV async enabling if and only if the MSR write
fully succeeds
- Fix a variety of issues where the emulator doesn't honor
guest-debug state, and clean up related code along the way
- Synthesize EPT Violation and #NPF "error code" bits when injecting
faults into L1 that didn't originate in hardware (in which case the
VMCS/VMCB doesn't hold relevant information)
- Add support for virtualizing (well, emulating) AMD's flavor of
CPL>0 CPUID faulting
- Clean up the GPR APIs so that KVM's use of "raw" is consistent, and
fix a variety of minor bugs along the way
- Fix an OOB memory access due to not checking the VP ID when
handling a Hyper-V PV TLB flush for L2
- Fix a bug in the mediated PMU's handling of fixed counters that
allowed the guest to bypass the PMU event filter
- Allow userspace to return EAGAIN when handling SNP and TDX
hypercalls, so the KVM can forward a "retry" status code to the
guest, and reserve all unused error codes for future usage
- Overhaul the TDP MMU => S-EPT code to move as much S-EPT specific
logic as possible into the TDX code, and to funnel (almost) all
S-EPT updates into a single chokepoint. The motivation is largely
to prepare for upcoming Dynamic PAMT support, but the cleanups are
nice to have on their own
- Plug a hole in shadow page table handling, where KVM fails to
recursively zap nested EPT/NPT shadow page tables when the nested
hypervisor tears down its own EPT/NPT page tables from the bottom
up
x86 (Intel):
- Support for nested MBEC (Mode-Based Execute Control), see above in
the generic section; also run with MBEC enabled even for non-nested
mode
- Use the kernel's "enum pg_level" in the TDX APIs instead of the
TDX-Module's level definitions (which are 0-based)
- Rework the TDX memory APIs to not require/assume that guest memory
is backed by "struct page" (in prepartion for guest_memfd hugepage
support)
- Fix a largely benign bug where KVM TDX would incorrectly state it
could emulate several x2APIC MSRs
- Use the "safe" WRMSR API when proxying LBR MSR writes as the
to-be-written value is guest controlled and completely unvalidated
x86 (AMD):
- Support for nested GMET (Guest Mode Execution Trap), see above in
the generic section; also run with GMET enabled even for non-nested
mode
- Fixes and minor cleanups to GHCB handling, on top of the earlier
work already merged into 7.1-rc
- Ensure KVM's copy of CR0 and CR3 are up-to-date prior to invoking
fastpath handlers
- Add support for virtualizing gPAT (KVM previously just used L1's
PAT when running L2)
- Fix goofs where KVM mishandles side effects (e.g. single-step and
PMC updates) when emulating VMRUN
- Fix a variety of bugs in AVIC's handling of x2APIC MSR
interception, most notably where KVM didn't disable interception of
IRR, ISR, and TMR regs
- Add support for virtualizing Host-Only/Guest-Only bits in the
mediated PMU
- Don't advertise support for unusable VM types, and account for VM
types that are disabled by firmware, e.g. to mitigate security
vulnerabilities
- Rewrite the SEV {en,de}crypt debug ioctls as they were riddle with
bugs and unnecessarily complicated, and add comprehensive tests
- Clean up and deduplicate the SEV page pinning code
- Fix minor goofs related to writing back CPUID information after
firmware rejects a CPUID page for an SNP vCPU
Generic:
- Rename invalidate_begin() to invalidate_start() throughout KVM to
follow the kernel's nomenclature, e.g. for mmu_notifiers
- Use guard() to cleanup up various KVM+VFIO flows
- Minor cleanups
guest_memfd:
- Return -EEXIST instead of -EINVAL if userspace attempts to bind a
gmem range to multiple memslots, and fix the test that was supposed
to ensure KVM returns -EEXIST
- Treat memslot binding offsets and sizes as unsigned values to fix a
bug where KVM interprets a large "offset + size" as a negative
value and allows a nonsensical offset
- Use the inode number instead of the page offset for the NUMA
interleaving index to fix a bug where the effective index would
jump by two for consecutive pages (the caller also adds in the page
offset)
Selftests:
- Randomize the dirty log test's delay when reaping the bitmap on the
first pass, as always waiting only 1ms hid a KVM RISC-V bug as the
test reaped the bitmap before KVM could build up enough state to
hit the bug
- A pile of one-off fixes and cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (326 commits)
KVM: x86/mmu: Ensure hugepage is in by slot before checking max mapping level
KVM: x86: Fix shadow paging use-after-free due to unexpected role
KVM: s390: Introducing kvm_arch_set_irq_inatomic fast inject
KVM: s390: Enable adapter_indicators_set to use mapped pages
KVM: s390: Add map/unmap ioctl and clean mappings post-guest
riscv: kvm: Use endian-specific __lelong for NACL shared memory
KVM: selftests: access_tracking_perf_test: bump number of NUMA nodes to 32
KVM: s390: vsie: Implement ASTFLEIE facility 2
KVM: s390: vsie: Refactor handle_stfle
s390/sclp: Detect ASTFLEIE 2 facility
KVM: s390: Minor refactor of base/ext facility lists
KVM: x86/mmu: move pdptrs out of the MMU
KVM: x86: check that kvm_handle_invpcid is only invoked with shadow paging
KVM: nSVM: invalidate cached PDPTRs across nested NPT transitions
KVM: nVMX: remove unnecessary code in prepare_vmcs02_rare
KVM: x86: remove nested_mmu from mmu_is_nested()
KVM: arm64: vgic-its: Make ABI commit helpers return void
KVM: s390: Initialize KVM_S390_GET_CMMA_BITS memory
LoongArch: KVM: Add missing slots_lock for device register/unregister
LoongArch: KVM: Validate irqchip index in irqfd routing
...
|
||
|
Linus Torvalds
|
59a6c7ac0a |
bitmap updates for v7.2
- new handy helper FIELD_GET_SIGNED() (Yury); - arch test_and_set_bit_lock() and clear_bit_unlock() cleanup (Randy); - __bf_shf() simplification (Yury); - bitmap_print_to_pagebuf() removal (Yury); - RISCV/bitrev conditional support (Jindie, Yury); -----BEGIN PGP SIGNATURE----- iQGzBAABCgAdFiEEi8GdvG6xMhdgpu/4sUSA/TofvsgFAmowS0sACgkQsUSA/Tof vshqLgwAw2RkV8ZHAniyPgz4noGztto+fcD70UbMgkh48n46PSKIUPCUvOj4RGHc Nzcjg6VkHLlypb7U3fHoXOHhkt+nTt+OeVDtZCmr8OzlRYmWXAo9TptfalDAlH1A OucRocjYSkwl/nbuYk0EQ/0+AcTFlfVTeyyus6wUYt7Nj1ncCNjKF2K5EjtF4aoQ JiA4d9LKWCIN4qFodP/9aFDzLX5MvqHgvOmBPSSFZKkMAer9HHCa/V3jHH3JMh21 bMPjZvaPUCI9oywLL+pDe0RRhP1CYFevxJ/Tnpcx0elV+CekrzuSsM3zpRbPt6hR 0P+8VVzUuoI8yth5mSH1gvUn9ZDvDeognTpKpXR574lB83A8Ub/Gu/NGMXO3TY0q mtuVbI5ZG0dCqahjEZvJQJmZ/qqbmwDhQDBtPS0x3S9XyzhNAga+JFpr6FXhULx8 b8ZrDPc5BGLtTt5aBOAgpN10CeFM8JHxku1B489sqRXQWaeKW++GkVfVTZ9UOK1E 8c3l/1Bl =z8f4 -----END PGP SIGNATURE----- Merge tag 'bitmap-for-7.2' of https://github.com/norov/linux Pull bitmap updates from Yury Norov: "This includes the new FIELD_GET_SIGNED() helper, bitmap_print_to_pagebuf() removal, RISCV/bitrev support, and a couple cleanups. - new handy helper FIELD_GET_SIGNED() (Yury) - arch test_and_set_bit_lock() and clear_bit_unlock() cleanup (Randy) - __bf_shf() simplification (Yury) - bitmap_print_to_pagebuf() removal (Yury) - RISCV/bitrev conditional support (Jindie, Yury)" * tag 'bitmap-for-7.2' of https://github.com/norov/linux: MAINTAINERS: BITOPS: include bitrev.[ch] arch/riscv: Add bitrev.h file to support rev8 and brev8 bitops: Define generic___bitrev8/16/32 for reuse lib/bitrev: Introduce GENERIC_BITREVERSE arch: select HAVE_ARCH_BITREVERSE conditionally on BITREVERSE bitmap: fix find helper documentation bitmap: drop bitmap_print_to_pagebuf() cpumask: switch cpumap_print_to_pagebuf() to using scnprintf() bitfield: wire __bf_shf to __builtin_ctzll bitops: use common function parameter names ptp: switch to using FIELD_GET_SIGNED() rtc: rv3032: switch to using FIELD_GET_SIGNED() wifi: rtw89: switch to using FIELD_GET_SIGNED() iio: mcp9600: switch to using FIELD_GET_SIGNED() iio: pressure: bmp280: switch to using FIELD_GET_SIGNED() iio: magnetometer: yas530: switch to using FIELD_GET_SIGNED() iio: intel_dc_ti_adc: switch to using FIELD_GET_SIGNED() x86/extable: switch to using FIELD_GET_SIGNED() bitfield: add FIELD_GET_SIGNED() |
||
|
Linus Torvalds
|
9c87e61e3c |
bpf-next-7.2
-----BEGIN PGP SIGNATURE-----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=rtQD
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"Major changes:
- Recover from BPF arena page faults using a scratch page and add
ptep_try_set() for lockless empty-slot installs on x86 and arm64.
This allows BPF kfuncs to access arena pointers directly.
The 'arena_direct_access' stable branch was created for this work
and was pulled into sched-ext and bpf-next trees (Tejun Heo, Kumar
Kartikeya Dwivedi)
- Lift old restriction and support 6+ arguments in BPF programs and
kfuncs on x86 and arm64 (Yonghong Song, Puranjay Mohan)
Other features and fixes:
- Add 24-bit BTF vlen and reclaim unused bits in the BTF UAPI to ease
addition of new BTF kinds (Alan Maguire)
- Raise the maximum BPF call chain depth from 8 to 16 frames (Alexei
Starovoitov)
- Refactor object relationship tracking in the verifier and fix a
dynptr use-after-free bug (Amery Hung)
- Harden the signed program loader and reject exclusive maps as inner
maps (Daniel Borkmann)
- Replace the verifier min/max bounds fields with a circular number
(cnum) representation and improve 32->64 bit range refinements
(Eduard Zingerman)
- Introduce the arena library and runtime (libarena) with a buddy
allocator, rbtree and SPMC queue data structures, ASAN support and
a parallel test harness. Allow subprograms to return arena pointers
and switch to a BTF type-tag based __arena annotation (Emil
Tsalapatis)
- Cache build IDs in the sleepable stackmap path and avoid faultable
build ID reads under mm locks (Ihor Solodrai)
- Introduce the tracing_multi link to attach a single BPF program to
many kernel functions at once. Allow specifying the uprobe_multi
target via FD (Jiri Olsa)
- Extend the bpf_list family of kfuncs with bpf_list_add/del(), and
bpf_list_is_first/is_last/empty() (Kaitao Cheng)
- Extend the BPF syscall with common attributes support for
prog_load, btf_load and map_create (Leon Hwang)
- Wrap rhashtable as BPF map (Mykyta Yatsenko, Herbert Xu)
- Add sleepable support for tracepoint programs and fix deadlocks in
LRU map due to NMI reentry (Mykyta Yatsenko)
- Fix OOB access in bpf_flow_keys, fix nullness analysis of inner
arrays, enforce write checks for global subprograms (Nuoqi Gui)
- Report the maximum combined stack depth and print a breakdown of
instructions processed per subprogram (Paul Chaignon)
- Add an XDP load-balancer benchmark and arm64 JIT support for stack
arguments (Puranjay Mohan)
- Add kfuncs to traverse over wakeup_sources (Samuel Wu)
- Allow sleepable BPF programs to use LPM trie maps directly (Vlad
Poenaru)
- Many more fixes and cleanups across the verifier, BTF, sockmap,
devmap, bpffs, security hooks, s390/riscv/loongarch JITs,
rqspinlock, libbpf, bpftool, selftests"
* tag 'bpf-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (336 commits)
selftests/bpf: Work around llvm stack overflow in crypto progs
selftests/bpf: add test for bpf_msg_pop_data() overflow
bpf, sockmap: fix integer overflow in bpf_msg_pop_data() bounds check
sockmap: Fix use-after-free in udp_bpf_recvmsg()
bpf, sockmap: keep sk_msg copy state in sync
bpf, sockmap: Fix wrong rsge offset in bpf_msg_push_data()
bpf, sockmap: reject overflowing copy + len in bpf_msg_push_data()
selftsets/bpf: Retry map update on helper_fill_hashmap()
selftests/bpf: Add test for sleepable lsm_cgroup rejection
selftests/bpf: Add test to verify the fix for bpf_setsockopt() helper
bpf: Fix bpf_get/setsockopt to tos for ipv4-mapped ipv6 socket
selftests/bpf: Avoid static LLVM linking for cross builds
selftests/bpf: Use common CFLAGS for urandom_read
selftests/bpf: Initialize operation name before use
tools/bpf: build: Append extra cflags
libbpf: Initialize CFLAGS before including Makefile.include
bpftool: Append extra host flags
bpftool: Avoid adding EXTRA_CFLAGS to HOST_CFLAGS
bpftool: Pass host flags to bootstrap libbpf
selftests/bpf: correct CONFIG_PPC64 macro name in comment
...
|
||
|
Linus Torvalds
|
b85966adbf |
Networking changes for 7.2.
Core & protocols
----------------
- Work on removing rtnl_lock protection throughout the stack continues.
In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even tho
user space wants a dump of all netdevs, most of the time, the OOO
programming model results in repeating the dump for each netdev.
Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on retransmit
timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 > 40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot express
reqid changes or migrate Transport mode selectors. The new interface
identifies the SA via SPI and mark, supports reqid changes, address
family changes, encap removal, and uses an atomic create+install
flow under x->lock to prevent SN/IV reuse during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff
----------------
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto API
users, since it changed crypto transformation objects into reference-
-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the global
crypto API as obsolete and insecure.
Wireless
--------
- Major rework of station bandwidth handling, fixing issues with lower
capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter
---------
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions
---------
- Remove TLS + sockmap integration. TLS wants to pin user pages
to avoid a copy, and sockmap wants to write to the input stream.
More work on this integration is clearly needed, and we can't find
any users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from
the vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM needs,
AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit kernel)
interface in user namespaces. To be deleted completely, soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers
-------
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit).
- bonding: add knob to strictly follow 802.3ad for link state.
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection, tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to 60%
win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for control
objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS table
size, even when table is configured by the user
- increase the max RSS table size for even traffic distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet (EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=oNfE
-----END PGP SIGNATURE-----
Merge tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Work on removing rtnl_lock protection throughout the stack
continues. In this chapter:
- don't use rtnl_lock for IPv6 multicast routing configuration
- don't take rtnl_lock in ethtool for modern drivers
- prepare Qdisc dump callbacks for rtnl_lock removal
- Support dumping just ifindex + name of all interfaces, under RCU.
It's a common operation for Netlink CLI tools (when translating
names to ifindexes) and previously required full rtnl_lock.
- Support dumping qdiscs and page pools for a specific netdev. Even
tho user space wants a dump of all netdevs, most of the time, the
OOO programming model results in repeating the dump for each
netdev. Which, in absence of a cache, leads to a O(n^2) behavior.
- Flush nexthops once on multi-nexthop removal (e.g. when device goes
down), another O(n^2) -> O(n) improvement.
- Rehash locally generated traffic to a different nexthop on
retransmit timeout.
- Honor oif when choosing nexthop for locally generated IPv6 traffic.
- Convert TCP Auth Option to crypto library, and drop non-RFC algos.
- Increase subflow limits in MPTCP to 64 and endpoint limit to 256.
- Support MPTCP signaling of IPv6 address + port (ADD_ADDR). We need
to selectively skip reporting of the standard TCP Timestamp option,
because they won't fit into the header space together (12 + 30 >
40).
- Support using bridge neighbor suppression, Duplicate Address
Detection, Gratuitous ARP and unsolicited NA forwarding - in EVPN
deployments, e.g. VXLAN fabrics (IPv4 and IPv6).
- Improve link state reporting for upper netdevs (e.g. macvlan) over
tunnel devices (again, mostly for EVPN deployments).
- Support binding GENEVE tunnels to a local address.
- Speed up UDP tunnel destruction (remove one synchronize_rcu()).
- Support exponential field encoding in multicast (IGMPv3 and MLDv2).
- Support attaching PSP crypto offload to containers (veth, netkit).
- Add a new IPSec Netlink message XFRM_MSG_MIGRATE_STATE that allows
migrating individual IPsec SAs independently of their policies.
The existing XFRM_MSG_MIGRATE is tightly coupled to policy+SA
migration, lacks SPI for unique SA identification, and cannot
express reqid changes or migrate Transport mode selectors.
The new interface identifies the SA via SPI and mark, supports
reqid changes, address family changes, encap removal, and uses an
atomic create+install flow under x->lock to prevent SN/IV reuse
during AEAD SA migration.
- Implement GRO/GSO support for PPPoE.
- Convert sockopt callbacks in a number of protocols to iov_iter.
Cross-tree stuff:
- Remove support for Crypto TFM cloning (unblocked after the TCP Auth
Option rework). This feature regressed performance for all crypto
API users, since it changed crypto transformation objects into
reference-counted objects.
- Add FCrypt-PCBC implementation to rxrpc and remove it from the
global crypto API as obsolete and insecure.
Wireless:
- Major rework of station bandwidth handling, fixing issues with
lower capability than AP.
- Cleanups for EMLSR spec issues (drafts differed).
- More Neighbor Awareness Networking (Wi-Fi Aware) work (multicast,
schedule improvements, multi-station etc.)
- Some Ultra High Reliability (UHR) / IEEE 802.11bn (D1.4) work
(e.g. non-primary channel access, UHR DBE support).
- Fine Timing Measurement ranging (i.e. distance measurement) APIs.
Netfilter:
- Use per-rule hash initval in nf_conncount. This avoids unnecessary
lock contention with short keys (e.g. conntrack zones) in different
namespaces.
- Various safety improvements, both in packet parsing and object
lifetimes. Notably add refcounts to conntrack timeout policy.
Deletions:
- Remove TLS + sockmap integration. TLS wants to pin user pages to
avoid a copy, and sockmap wants to write to the input stream. More
work on this integration is clearly needed, and we can't find any
users (original author admitted that they never deployed it).
- Remove support for TLS offload with TCP Offload Engine (the far
more common opportunistic offload is retained). The locking looks
unfixable (driver sleeps under TCP spin locks) and people from the
vendor that added this are AWOL.
- Remove more ATM code, trying to leave behind only what PPPoATM
needs, AAL5 and br2684 with permanent circuits.
- Remove AppleTalk. Let it join hamradio in our out of tree protocol
graveyard, I mean, repository.
- Disable 32-bit x_tables compatibility (32bit binaries on 64bit
kernel) interface in user namespaces. To be deleted completely,
soon.
- Remove 5/10 MHz support from cfg80211/mac80211.
Drivers:
- Software:
- Support DEVMEM/DMABUF Tx over NETMEM_TX_NO_DMA devices (netkit)
- bonding: add knob to strictly follow 802.3ad for link state
- New drivers:
- Alibaba Elastic Ethernet Adaptor (cloud vNIC).
- NXP NETC switch within i.MX94.
- DPLL:
- Add operational state to pins (implement in zl3073x).
- Add generic DPLL type, for daisy-chaining DPLLs (implement in ice).
- Ethernet high-speed NICs:
- Huawei (hinic3):
- enhance tc flow offload support with queue selection,
tunnels
- nVidia/Mellanox:
- avoid over-copying payload to the skb's linear part (up to
60% win for LRO on slow CPUs like ARM64 V2)
- expose more per-queue stats over the standard API
- support additional, unprivileged PFs in the DPU
configuration
- support Socket Direct (multi-PF) with switchdev offloads
- add a pool / frag allocator for DMA mapped buffers for
control objects, save memory on systems with 64kB page size
- take advantage of the ability to dynamically change RSS
table size, even when table is configured by the user
- increase the max RSS table size for even traffic
distribution
- Ethernet NICs:
- Marvell/Aquantia:
- AQC113 PTP support
- Realtek USB (r8152):
- support 10Gbit Link Speeds and Energy-Efficient Ethernet
(EEE)
- support firmware loaded (for RTL8157/RTL8159)
- support for the RTL8159
- Intel (ixgbe):
- support Energy-Efficient Ethernet (EEE) on E610 devices
- Ethernet switches:
- Airoha:
- support multiple netdevs on a single GDM block / port
- Marvell (mv88e6xxx):
- support SERDES of mv88e6321
- Microchip (ksz8/9):
- rework the driver callbacks to remove one indirection layer
- Motorcomm (yt921x):
- support port rate policing
- support TBF qdisc offload
- support ACL/flower offload
- nVidia/Mellanox:
- expose per-PG rx_discards
- Realtek:
- rtl8365mb: bridge offloading and VLAN support
- Ethernet PHYs:
- Airoha:
- support Airoha AN8801R Gigabit PHYs.
- Micrel:
- implement 3 low-loss cable tunables
- Realtek:
- support MDI swapping for RTL8226-CG
- support MDIO for RTL931x
- Qualcomm:
- at803x: Rx and Tx clock management for IPQ5018 PHY
- Motorcomm:
- support YT8522 100M RMII PHY
- set drive strength in YT8531s RGMII
- TI:
- dp83822: add optional external PHY clock
- Bluetooth:
- hci_sync: add support for HCI_LE_Set_Host_Feature [v2]
- SMP: use AES-CMAC library API
- Intel:
- support Product level reset
- support smart trigger dump
- Mediatek:
- add event filter to filter specific event
- Realtek:
- fix RTL8761B/BU broken LE extended scan
- WiFi:
- Broadcom (b43):
- new support for a 11n device
- MediaTek (mt76):
- support mt7927
- mt792x: broken usb transport detection
- mt7921: regulatory improvements
- Qualcomm (ath9k):
- GPIO interface improvements
- Qualcomm (ath12k):
- WDS support
- replace dynamic memory allocation in WMI Rx path
- thermal throttling/cooling device support
- 6 GHz incumbent interference detection
- channel 177 in 5 GHz
- Realtek (rt89):
- RTL8922AU support
- USB 3 mode switch for performance
- better monitor radiotap support
- RTL8922DE preparations"
* tag 'net-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1778 commits)
ipv4: fib_rule: Move fib4_rules_exit() to ->exit().
net: serialize netif_running() check in enqueue_to_backlog()
net: skmsg: preserve sg.copy across SG transforms
appletalk: move the protocol out of tree
appletalk: stop storing per-interface state in struct net_device
selftests/bpf: test that TLS crypto is rejected on a sockmap socket
selftests/bpf: drop the unused kTLS program from test_sockmap
selftests/bpf: remove sockmap + ktls tests
tls: remove dead sockmap (psock) handling from the SW path
tls: reject the combination of TLS and sockmap
atm: remove orphaned uAPI for deleted drivers, protocols and SVCs
atm: remove unused ATM PHY operations
atm: remove the unused pre_send and send_bh device operations
atm: remove the unused change_qos device operation
atm: remove SVC socket support and the signaling daemon interface
atm: remove the local ATM (NSAP) address registry
atm: remove dead SONET PHY ioctls
atm: remove the unused send_oam / push_oam callbacks
atm: remove AAL3/4 transport support
net: dsa: sja1105: fix lastused timestamp in flower stats
...
|
||
|
Linus Torvalds
|
0d8c113493 |
This update includes the following changes:
API:
- Drop support for off-CPU cryptography in af_alg.
- Document that af_alg is *always* slower.
- Document the deprecation of af_alg.
- Remove zero-copy support from skcipher and aead in af_alg.
- Cap AEAD AD length to 0x80000000 in af_alg.
- Free default RNG on module exit.
Algorithms:
- Fix vli multiplication carry overflow in ecc.
- Drop unused cipher_null crypto_alg.
- Remove unused variants of drbg.
- Use lib/crypto in drbg.
- Use memcpy_from/to_sglist in authencesn.
- Allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode.
- Disallow RSA PKCS#1 SHA-1 sig algs in FIPS mode.
- Filter out async aead implementations at alloc in krb5.
- Fix non-parallel fallback by rstoring callback in pcrypt.
- Validate poly1305 template argument in chacha20poly1305.
Drivers:
- Add sysfs PCI reset support to qat.
- Add KPT support for GEN6 devices to qat.
- Remove unused character device and ioctls from qat.
- Add support for hw access via SMCC to mtk.
- Remove prng support from crypto4xx.
- Remove prng support from hisi-trng.
- Remove prng support from sun4i-ss.
- Remove prng support from xilinx-trng.
- Remove loongson-rng.
- Remove exynos-rng.
Others:
- Remove support for AIO on sockets.
-----BEGIN PGP SIGNATURE-----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=4BGT
-----END PGP SIGNATURE-----
Merge tag 'v7.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Drop support for off-CPU cryptography in af_alg
- Document that af_alg is *always* slower
- Document the deprecation of af_alg
- Remove zero-copy support from skcipher and aead in af_alg
- Cap AEAD AD length to 0x80000000 in af_alg
- Free default RNG on module exit
Algorithms:
- Fix vli multiplication carry overflow in ecc
- Drop unused cipher_null crypto_alg
- Remove unused variants of drbg
- Use lib/crypto in drbg
- Use memcpy_from/to_sglist in authencesn
- Allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
- Disallow RSA PKCS#1 SHA-1 sig algs in FIPS mode
- Filter out async aead implementations at alloc in krb5
- Fix non-parallel fallback by rstoring callback in pcrypt
- Validate poly1305 template argument in chacha20poly1305
Drivers:
- Add sysfs PCI reset support to qat
- Add KPT support for GEN6 devices to qat
- Remove unused character device and ioctls from qat
- Add support for hw access via SMCC to mtk
- Remove prng support from crypto4xx
- Remove prng support from hisi-trng
- Remove prng support from sun4i-ss
- Remove prng support from xilinx-trng
- Remove loongson-rng
- Remove exynos-rng
Others:
- Remove support for AIO on sockets"
* tag 'v7.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (196 commits)
crypto: tegra - fix refcount leak in tegra_se_host1x_submit()
crypto: rng - Free default RNG on module exit
crypto: testmgr - allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
hwrng: jh7110 - fix refcount leak in starfive_trng_read()
crypto: atmel-ecc - drop dead code in atmel_ecdh_max_size
crypto: cavium/cpt - fix DMA cleanup using wrong loop index
crypto: marvell/octeontx - fix DMA cleanup using wrong loop index
MAINTAINERS: make myself the maintainer of the Qualcomm QCE driver
crypto: amcc - convert irq_of_parse_and_map to platform_get_irq
crypto: sun4i-ss - Remove insecure and unused rng_alg
hwrng: xilinx - Move xilinx-rng into drivers/char/hw_random/
crypto: xilinx-trng - Replace crypto_drbg_ctr_df() with HMAC-SHA512
crypto: xilinx-trng - Fix return value of xtrng_hwrng_trng_read()
crypto: xilinx-trng - Remove crypto_rng interface
crypto: exynos-rng - Remove exynos-rng driver
hwrng: hisi-trng - Move hisi-trng into drivers/char/hw_random/
crypto: hisi-trng - Remove crypto_rng interface
crypto: loongson - Remove broken and unused loongson-rng
crypto: crypto4xx - Remove insecure and unused rng_alg
crypto: qat - validate RSA CRT component lengths
...
|
||
|
Linus Torvalds
|
186d3c4e92 |
A series of updates for the VDSO:
- Remove the redundant CONFIG_GENERIC_TIME_VSYSCALL after converting the
remaining users over.
- Rework and sanitize the MIPS VDSO handling, so it does not handle the
time related VDSO if there is no VDSO capable clocksource available.
Also stop mapping VDSO data pages unconditionally even if there is no
usage possible.
-----BEGIN PGP SIGNATURE-----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=Z90m
-----END PGP SIGNATURE-----
Merge tag 'timers-vdso-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull vdso updates from Thomas Gleixner:
- Remove the redundant CONFIG_GENERIC_TIME_VSYSCALL after converting
the remaining users over.
- Rework and sanitize the MIPS VDSO handling, so it does not handle the
time related VDSO if there is no VDSO capable clocksource available.
Also stop mapping VDSO data pages unconditionally even if there is no
usage possible.
* tag 'timers-vdso-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
MIPS: VDSO: Fold MIPS_CLOCK_VSYSCALL into MIPS_GENERIC_GETTIMEOFDAY
MIPS: VDSO: Gate microMIPS restriction on GCC version
MIPS: VDSO: Fold MIPS_DISABLE_VDSO into MIPS_GENERIC_GETTIMEOFDAY
clocksource/drivers/mips-gic-timer: Only use VDSO_CLOCKMODE_GIC when it is a available
MIPS: csrc-r4k: Only use VDSO_CLOCKMODE_R4K when it is a available
MIPS: VDSO: Only map the data pages when the vDSO is used
MIPS: Introduce Kconfig MIPS_GENERIC_GETTIMEOFDAY
vdso/datastore: Always provide symbol declarations
MAINTAINERS: Add include/linux/vdso_datastore.h to vDSO block
vdso/gettimeofday: Rename __arch_get_vdso_u_timens_data()
vdso/treewide: Drop GENERIC_TIME_VSYSCALL
vdso/vsyscall: Gate update_vsyscall() behind CONFIG_GENERIC_GETTIMEOFDAY
riscv: vdso: Drop CONFIG_GENERIC_TIME_VSYSCALL guard around syscall fallbacks
|
||
|
Linus Torvalds
|
13e1a6d6a1 |
Interrupt core code changes:
- Rework of /proc/interrupt handling:
/proc/interrupts was subject to micro optimizations for a long time,
but most of the low hanging fruit was left on the table. This rework
addresses the major time consuming issues:
- Printing a long series of zeros one by one via a format string
instead of counting subsequent zeros and emitting a string
constant.
- Simplify and cache the conditions whether interrupts should be printed
- Use a proper iteration over the interrupt descriptor xarray
instead of walking and testing one by one.
- Provide helper functions for the architecture code to emit the
architecture specific counters
- Convert the counter structure in x86 to an array, which
simplifies the output and add mechanisms to suppress unused
architecture interrupts, which just occupy space for
nothing. Adopt the new core mechanisms.
This adjusts the gdb scripts related to interrupt counter statitics
to work with the new mechanisms.
- Prevent a string overflow in the /proc/irq/$N/ directory name
creation code.
-----BEGIN PGP SIGNATURE-----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=z6vj
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull interrupt core updates from Thomas Gleixner:
- Rework of /proc/interrupt handling:
/proc/interrupts was subject to micro optimizations for a long time,
but most of the low hanging fruit was left on the table. This rework
addresses the major time consuming issues:
- Printing a long series of zeros one by one via a format string
instead of counting subsequent zeros and emitting a string
constant.
- Simplify and cache the conditions whether interrupts should be
printed
- Use a proper iteration over the interrupt descriptor xarray
instead of walking and testing one by one.
- Provide helper functions for the architecture code to emit the
architecture specific counters
- Convert the counter structure in x86 to an array, which
simplifies the output and add mechanisms to suppress unused
architecture interrupts, which just occupy space for nothing.
Adopt the new core mechanisms.
This adjusts the gdb scripts related to interrupt counter statistics
to work with the new mechanisms.
- Prevent a string overflow in the /proc/irq/$N/ directory name
creation code.
* tag 'irq-core-2026-06-13' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
x86/irq: Add missing 's' back to thermal event printout
genirq/proc: Speed up /proc/interrupts iteration
genirq/proc: Runtime size the chip name
genirq: Expose irq_find_desc_at_or_after() in core code
genirq: Add rcuref count to struct irq_desc
genirq/proc: Increase default interrupt number precision to four
genirq: Calculate precision only when required
genirq: Cache the condition for /proc/interrupts exposure
genirq/manage: Make NMI cleanup RT safe
genirq: Expose nr_irqs in core code
scripts/gdb: Update x86 interrupts to the array based storage
x86/irq: Move IOAPIC misrouted and PIC/APIC error counts into irq_stats
x86/irq: Suppress unlikely interrupt stats by default
x86/irq: Make irqstats array based
genirq/proc: Utilize irq_desc::tot_count to avoid evaluation
genirq/proc: Avoid formatting zero counts in /proc/interrupts
x86/irq: Optimize interrupts decimals printing
genirq/proc: Size interrupt directory names for 10-digit interrupt numbers
|
||
|
Ethan Nelson-Moore
|
794b5e7727 |
bluetooth: remove all PCMCIA drivers
PCMCIA is almost completely obsolete (the last computers supporting it
natively were from ~2009), and the general consensus [1] seems to be
that support for it should be gradually removed from the kernel.
In 2023, an initial step of removing all the PCMCIA char drivers was
taken in commit
|
||
|
Zeng Chi
|
aeded601d6 |
LoongArch: KVM: Add missing slots_lock for device register/unregister
kvm_io_bus_register_dev() and kvm_io_bus_unregister_dev() should be called under kvm->slots_lock. The unregister calls in ipi.c, eiointc.c and pch_pic.c were also missing this protection. Add it to match the register side. Cc: stable@vger.kernel.org Reviewed-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Zeng Chi <zengchi@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Yanfei Xu
|
3474037904 |
LoongArch: KVM: Validate irqchip index in irqfd routing
Sashiko reported that the irqchip index is not validated for LoongArch.
Add validation and reject out-of-range irqchip indexes to avoid indexing
past the routing table's chip array.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Qiang Ma
|
ebd50de14f |
LoongArch: KVM: Return full old CSR value from kvm_emu_xchg_csr()
The LoongArch CSRXCHG instruction returns the full old CSR value in rd
after applying the masked update. kvm_emu_xchg_csr() currently masks
the saved value before returning it to the guest, so rd receives only
the bits selected by the write mask.
That breaks the architectural behavior and makes a zero mask return 0
instead of the previous CSR value. So, keep the masked CSR update, but
return the unmodified old CSR value.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Qiang Ma
|
fb89e0fe2d |
LoongArch: KVM: Check the return values for put_user()
put_user() may return -EFAULT, so, when the user space address is invalid, the caller should return -EFAULT. Cc: stable@vger.kernel.org Reviewed-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Qiang Ma <maqianga@uniontech.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Bibo Mao
|
83551ccedf |
LoongArch: KVM: Remove timer interrupt injection when SW timer expired
The software timer emulation is to wake up vCPU when the vCPU executes idle instruction and gives up host CPU, the vCPU timer tick value and interrupt is set when vCPU is scheduled in. It is not necessary to inject timer interrupt when SW timer is expired. Here remove it, also use common API kvm_vcpu_wake_up() to wake up vCPU. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Bibo Mao
|
8c5cd2b9d6 |
LoongArch: KVM: Deliver interrupt after IN_GUEST_MODE is set
Interrupt delivery should be called after IN_GUEST_MODE is set. Other threads may be posting interrupt however does not send IPI to the vCPU, since the vCPU is not in IN_GUEST_MODE yet. Here move function call with kvm_deliver_intr() after IN_GUEST_MODE is set, and set mode with OUTSIDE_GUEST_MODE with atomic method. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Bibo Mao
|
4298588361 |
LoongArch: KVM: Add valid bit check when set CSR.ESTAT register
When set CSR.ESTAT register in function _kvm_setcsr(), valid bit check is added here. Also interrupt CPU_AVEC is checked by msgint feature. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Bibo Mao
|
3179253ad5 |
LoongArch: KVM: Inject interrupts with batch method
With bitmask method, interrupts can be injected with batch mode rather than one by one. Also remove unused array priority_to_irq[] here. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Bibo Mao
|
33c6da26d8 |
LoongArch: KVM: Check msgint feature in interrupt post
Interrupt AVEC is valid only if VM has msgint feature, and this feature is checked in interrupt handling. Since interrupt handling is executing in VM context switch, and it is hot path, here move the feature checking in interrupt post rather than interrupt handling. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Bibo Mao
|
09b318ab77 |
LoongArch: KVM: Check irq validity in kvm_vcpu_ioctl_interrupt()
Function kvm_vcpu_ioctl_interrupt() can be called from userspace, here
add irq validility cheking in kvm_vcpu_ioctl_interrupt().
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Bibo Mao
|
1ef045effb |
LoongArch: KVM: Use existing macro about interrupt bit mask
With interrupt post, register CSR.GINTC and CSR.ESTAT is used, and CSR.ESTAT is used for percpu interrupt injection and CSR.GINTC is for external hardware interrupt injection. Here use existing macro about interrupt bit of register CSR.GINTC and CSR.ESTAT, rather than hard coded constant value. Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Bibo Mao
|
f4caaac763 |
LoongArch: KVM: Fix FPU register width with user access API
At the beginning, only 64 bit FPU is supported. With FPU register get
interface, 64 bit FPU data is copied to user space, the same with FPU
register set API. However with LSX and LASX supported in later, there
should be FPU data copied with bigger width. So here fixes this issue,
copy the whole 256 bit FPU data from/to user space.
Cc: stable@vger.kernel.org
Fixes:
|