Expand the table borders (upper & lower) to prevent a documentation
build error:
Documentation/hwmon/ltc4283.rst:261: ERROR: Malformed table.
Text in column margin in table line 3.
======================= ==========================================
power1_failed_fault_log Set to 1 by a power1 fault occurring.
power1_good_input_fault_log Set to 1 by a power1 good input fault occurring at PGIO3.
Fixes: dd63353a0b ("hwmon: ltc4283: Add support for the LTC4283 Swap Controller")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20260620011833.3568693-1-rdunlap@infradead.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Here is the big set of USB and Thunderbolt driver changes for 7.2-rc1.
Lots of little stuff in here, major highlights include:
- USB4STREAM support for Thunderbolt devices. A new way to send "raw"
data very quickly over a USB4 connection to another system directly.
- Other thunderbolt updates and changes to make the stream code work
- xhci driver updates and additions
- typec driver updates and additions
- usb gadget driver updates and fixes for reported issues
- zh_CN documentation translation of the USB documentation
- usb-serial driver updates
- dts cleanups for some USB platforms
- other minor USB driver updates and tweaks
All of these have been in linux-next for over a week with no reported
issues, most of them for many many weeks.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCajk1lg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymieQCg1VgSwN2sXBtMDGi4Sca+ecADx2kAn0bm/e/C
JjShAcuQ/vj/6zNJm0ll
=vXkP
-----END PGP SIGNATURE-----
Merge tag 'usb-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 7.2-rc1.
Lots of little stuff in here, major highlights include:
- USB4STREAM support for Thunderbolt devices. A new way to send "raw"
data very quickly over a USB4 connection to another system directly
- Other thunderbolt updates and changes to make the stream code work
- xhci driver updates and additions
- typec driver updates and additions
- usb gadget driver updates and fixes for reported issues
- zh_CN documentation translation of the USB documentation
- usb-serial driver updates
- dts cleanups for some USB platforms
- other minor USB driver updates and tweaks
All of these have been in linux-next for over a week with no reported
issues, most of them for many many weeks"
* tag 'usb-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (131 commits)
usb: ucsi: huawei_gaokun: support mode switching
thunderbolt: debugfs: Fix sideband write size check
thunderbolt: debugfs: Fix margining error counter buffer leak
usb: host: xhci-rcar: Split R-Car Gen2 and Gen3 .plat_start() handling
usb: host: xhci-rcar: Remove SET_XHCI_PLAT_PRIV_FOR_RCAR() macro
usb: xhci: allocate internal DCBAA mirror dynamically
usb: xhci: allocate DCBAA based on host controller max slots
usb: xhci: refactor DCBAA struct
xhci: Prevent queuing new commands if xhci is inaccessible
xhci: dbc: detect and recover hung DbC during enumeraton
xhci: dbc: add timestamps to DbC state changes in a new helper.
xhci: dbc: add helper to set and clear DbC DCE enable bit
xhci: dbc: serialize enabling and disabling dbc
xhci: dbc: Fix sysfs ABI Documentation for xhci dbc states
usb: xhci: Improve Soft Retries after short transfers
usb: xhci: Remove isochronous URB_SHORT_NOT_OK handling
usb: xhci: Remove skip_isoc_td()
usb: xhci: Simplify xhci_quiesce()
usb: xhci: remove legacy 'num_trbs_free' tracking
usb: xhci: fix typo in xhci_set_port_power() comment
...
This is the hwmon driver for Microchip EMC1812/13/14/15/33
Multichannel Low-Voltage Remote Diode Sensor Family.
EMC1812 has one external remote temperature monitoring channel.
EMC1813 has two external remote temperature monitoring channels.
EMC1814 has three external remote temperature monitoring channels,
channels 2 and 3 support anti parallel diode.
EMC1815 has four external remote temperature monitoring channels and
channels 1/2 and 3/4 support anti parallel diode.
EMC1833 has two external remote temperature monitoring channels and
channels 1 and 2 support anti parallel diode.
Resistance Error Correction is supported on channels 1/2 and 3/4.
Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
Link: https://lore.kernel.org/r/20260610-hw_mon-emc1812-v11-2-cef809af5c19@microchip.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
ADPM12250 is a quarter brick DC/DC Power Module. It is a high power
non-isolated converter capable of delivering regulated 12V with
continuous power level of 2500W. Uses PMBus.
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20260610-dev-adpm12250-v1-1-422760bb80da@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The INA238 family supports eight conversion time steps from 50 us to
4120 us (SQ52206: 66 us to 8230 us). At the millisecond granularity of
update_interval, the four shortest steps (50, 84, 150, 280 us) all
round to the same value and cannot be individually selected.
Add support for the generic update_interval_us attribute, which reports
and programs the same ADC cycle time as update_interval but in
microseconds, giving userspace full access to all conversion time steps.
Both attributes reflect the total cycle time including the active
averaging count: the reported value is the raw conversion time
multiplied by the number of averaged samples, and writes apply the
inverse mapping.
Signed-off-by: Ferdinand Schwenk <ferdinand.schwenk@advastore.com>
Link: https://lore.kernel.org/r/20260609-hwmon-ina238-update-interval-us-v2-v3-3-016b55567950@advastore.com
[groeck: Fixed some multi-line alignment issues]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Some hardware monitoring chips support update intervals below one
millisecond. The existing update_interval attribute uses millisecond
granularity, which causes sub-millisecond steps to round to the same
value and become inaccessible from userspace.
Introduce update_interval_us, a companion chip-level attribute that
expresses the same update interval in microseconds. Drivers
implementing this attribute should also implement update_interval for
compatibility with millisecond-based userspace interfaces.
Signed-off-by: Ferdinand Schwenk <ferdinand.schwenk@advastore.com>
Link: https://lore.kernel.org/r/20260609-hwmon-ina238-update-interval-us-v2-v3-2-016b55567950@advastore.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Support the LTC4283 Hot Swap Controller. The device features programmable
current limit with foldback and independently adjustable inrush current to
optimize the MOSFET safe operating area (SOA). The SOA timer limits MOSFET
temperature rise for reliable protection against overstresses.
An I2C interface and onboard ADC allow monitoring of board current,
voltage, power, energy, and fault status.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20260502-ltc4283-support-v13-2-1c206542e652@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add a PMBus driver for the Analog Devices MAX20860A step-down DC-DC
switching regulator. The MAX20860A provides monitoring of input/output
voltage, output current, and temperature via the PMBus interface using
linear data format. Optional regulator support is available via
CONFIG_SENSORS_MAX20860A_REGULATOR.
Signed-off-by: Syed Arif <arif.syed@hpe.com>
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260601184516.919488-3-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for BMR316, BMR321, BMR350 and BMR351 DC/DC converter
modules from Flex to the pmbus driver.
Signed-off-by: Daniel Nilsson <linux@erq.se>
Link: https://lore.kernel.org/r/20260603085712.659432-2-linux@erq.se
[groeck: Resolved conflicts (explicit struct members in pmbus_id)]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Extend the raspberrypi-hwmon driver to expose firmware-provided
voltage measurements through the hwmon subsystem.
The driver now exports the following voltage inputs:
- in0_input (core)
- in1_input (sdram_c)
- in2_input (sdram_i)
- in3_input (sdram_p)
Voltage values returned by firmware are converted from microvolts
to millivolts as expected by the hwmon subsystem.
Update the documentation related to it.
The existing undervoltage sticky alarm handling is preserved and
associated with the first voltage channel.
Tested in -
- Raspberry Pi 3b+ (Linux raspberrypi 6.12.75+rpt-rpi-v8 #1 SMP PREEMPT
Debian 1:6.12.75-1+rpt1 (2026-03-11) aarch64 GNU/Linux)
Signed-off-by: Shubham Chakraborty <chakrabortyshubham66@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20260517080445.103962-3-chakrabortyshubham66@gmail.com
[groeck: Added missing empty line after declaration]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
- Remove broken Intel wiki link; add Intel SDM download page link
- Fix description of tempX_max to clarify it is not Core2-only
- Correct tempX_label string for package temperature (changed in commit
2bc0e6d07e ("hwmon: (coretemp) rearrange tjmax handing code"))
Signed-off-by: Roman Bakshansky <bakshansky.lists@gmail.com>
Link: https://lore.kernel.org/r/20260517152027.350356-1-bakshansky.lists@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Document the debugfs serial_number file exposed by the htu31 driver.
The driver creates a debugfs entry for the sensor serial number, but
the documentation currently only describes the sysfs interface.
Signed-off-by: Chen-Shi-Hong <eric039eric@gmail.com>
Link: https://lore.kernel.org/r/20260517125320.2196-1-eric039eric@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The adt7411 driver exposes additional standard hwmon attributes beyond
the ones currently listed in Documentation/hwmon/adt7411.rst.
Document voltage min/max/alarm attributes, temperature min/max and
min_alarm/max_alarm attributes, and the temp2_fault attribute for the
external temperature channel.
Also update the documentation to clarify that analog inputs in1 and in2
are not available when the external temperature sensor is enabled, and
remove the outdated statement claiming that external temperature support
and limit registers are unsupported.
Signed-off-by: Chen-Shi-Hong <eric039eric@gmail.com>
Link: https://lore.kernel.org/r/20260516035245.1604-1-eric039eric@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The nct7802 chip exposes two registers that allow setting the time
interval between successive duty increases or decreases in Smart Fan
mode. The units are intervals of 0.1 second. The default value at power
on is 10, so 1 second.
Add sysfs attributes for step_up_time and step_down_time to allow
controlling the responsiveness of the fan speed. Values are represented
as milliseconds to the user. When set, the value is clamped to the valid
range of 100 to 25500 (0.1 to 25.5 seconds), and rounded to the nearest
multiple of 100.
Signed-off-by: Ronan Dalton <ronan.dalton@alliedtelesis.co.nz>
Cc: linux-kernel@vger.kernel.org
Cc: linux-hwmon@vger.kernel.org
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20260514003404.1548747-2-ronan.dalton@alliedtelesis.co.nz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add hwmon driver for the ARCTIC Fan Controller, a USB HID device
(VID 0x3904, PID 0xF001) with 10 fan channels. Exposes fan speed in
RPM (read-only) and PWM duty cycle (0-255, read/write) via sysfs.
The device pushes IN reports at ~1 Hz containing RPM readings. PWM is
set via OUT reports; the device applies the new duty cycle and sends
back a 2-byte ACK (Report ID 0x02). The driver waits up to 1 s for
the ACK using a completion. Measured device latency: max ~563 ms over
500 iterations. PWM control is manual-only: the device never changes
duty cycle autonomously.
raw_event() may run in hardirq context, so fan_rpm[] is protected by
a spinlock with irq-save. pwm_duty[] is also protected by this spinlock
because reset_resume() clears it outside the hwmon core lock. The OUT
report buffer is built and write_pending is armed under the same lock so
that no reset_resume() can race with the pwm_duty[] snapshot. priv->buf
is exclusively accessed by write(), which the hwmon core serializes.
Signed-off-by: Aureo Serrano de Souza <aureo.serrano@arctic.de>
Link: https://lore.kernel.org/r/20260508064405.38676-1-aureo.serrano@arctic.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Document the hardware monitoring support for the Delta E50SN12051
device.
The documentation describes the supported sensors exposed via the
hwmon subsystem, including voltage, current, and temperature measurements.
Signed-off-by: Colin Huang <u8813345@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260508-add-e50sn12051-v5-2-abebdcc29665@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for MAX20830 step-down DC-DC switching regulator with
PMBus interface. It allows monitoring of input/output voltage,
output current and temperature through the PMBus serial interface.
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Link: https://lore.kernel.org/r/20260505-dev_max20830-v4-2-4343dcbfd7d7@analog.com
[groeck: checkpatch cleanup (space before and after '-')]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmocssAeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGsvMIAIYkDW1HujnkP3/G
SzQuQozH30O8Fpxdo+axRG6DweP2DTW1lD35YPJJsVto0G2BJZVjzsrx8RSgV6uz
DDY+Y0x0/VknMZ4JDrDoWRIyHaVV6p3+NcSHhwrxctQsa8UdEf4aXGaTf91nIBSB
GCX5R2YxxuQSTMZ19F/e+UShnRC5OO0FbCB5xhSnUJX3+eoRe0mcGAQB4DBUKxsx
BZ5DMOmoiEyPFJbdmy11X0epgJ32qgL7HPYLEo44Vcfy/Ot9lrL9b4vKbG+b3N1P
YAZccYH/dlpUuk7piR37H87Ntgz/SZcYbJlx2iAWoNk4tMmfRUO16igar8yFHjSt
FLN2Zx4=
=ufVr
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rc6' into usb-next
We need the USB and Thunderbolt fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Similar to other HWMON sensors add a section in the
documentation describing the sysfs attributes, their
permissions and a short description.
Signed-off-by: Flaviu Nistor <flaviu.nistor@gmail.com>
Link: https://lore.kernel.org/r/20260417054511.5432-1-flaviu.nistor@gmail.com
[groeck: Removed trailing ":" from attribute names; fixed minor typo]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for MPS mp2985 controller. This driver exposes
telemetry and limit value readings and writtings.
Signed-off-by: Wensheng Wang <wenswang@yeah.net>
Link: https://lore.kernel.org/r/20260414092921.1067735-2-wenswang@yeah.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add an auxiliary-bus hwmon driver for the temperature sensor exposed by
AMD Promontory 21 (PROM21) xHCI PCI functions. The driver binds to the
"hwmon" auxiliary device published by the PROM21 xHCI PCI glue and
exposes the sensor as temp1_input under the prom21_xhci hwmon device.
The sensor is accessed through a PROM21 vendor index/data register pair
in the xHCI PCI MMIO BAR. The driver consumes parent-provided MMIO data
from the PROM21 PCI glue instead of inspecting the parent PCI driver's
drvdata. The read path restores the previous vendor index value after
sampling and does not runtime-resume the parent PCI device; reads from a
suspended parent return -ENODATA.
Document the supported device, register access, runtime PM behavior, and
sysfs lookup method. The documentation also records the observation
method used to identify the register pair and derive the conversion
formula.
Assisted-by: Codex:gpt-5.5
Signed-off-by: Jihong Min <hurryman2212@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Yaroslav Isakov <yaroslav.isakov@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20260519000732.2334711-3-hurryman2212@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The hwmon sysfs naming convention uses
temp[1-*]_input for temperature channels.
Documentation/hwmon/sy7636a-hwmon.rst currently documents
temp0_input, while the driver uses the standard hwmon
temperature channel interface.
Update the documentation to use temp1_input.
Signed-off-by: Chen-Shi-Hong <eric039eric@gmail.com>
Link: https://lore.kernel.org/r/20260514154108.1937-1-eric039eric@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The ideapad-laptop.c file now exists inside drivers/platform/x86/lenovo/
directory. Updating the GitHub link to the correct path.
Signed-off-by: Ninad Naik <ninadnaik07@gmail.com>
Link: https://lore.kernel.org/r/20260417191411.713958-1-ninadnaik07@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add pmbus support for Sony APS-379 power supplies. There are a few PMBUS
commands that return data that is undocumented/invalid so these need to
be rejected with -ENXIO. The READ_VOUT command returns data in linear11
format instead of linear16 so we need to workaround this.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20260410012414.2818829-3-chris.packham@alliedtelesis.co.nz
[groeck: Dropped empty line from documentation; added module name to Kconfig]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
There are several places in yogafan.rst where it appears that lines
are meant to be presented on their own but instead they are strung
together due to the lack of markups. Fix these issues by:
- using bullets where needed
- indenting continuation lines of bulleted items
- using a table where appropriate
- using a literal block where appropriate
Fixes: c67c248ca4 ("hwmon: (yogafan) Add support for Lenovo Yoga/Legion fan monitoring")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20260407052317.2097791-1-rdunlap@infradead.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Since the sensor supports different sampling intervals via
bits CR0 and CR1 from the CONFIG register, add support in
order for the conversion rate to be changed from user space.
Default is 4 conv/sec.
Signed-off-by: Flaviu Nistor <flaviu.nistor@gmail.com>
Link: https://lore.kernel.org/r/20260403140654.10368-1-flaviu.nistor@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add a blank line between the License and heading lines to prevent a
documentation build warning:
Documentation/hwmon/yogafan.rst:2: WARNING: Explicit markup ends without
a blank line; unexpected unindent. [docutils]
Fixes: c67c248ca4 ("hwmon: (yogafan) Add support for Lenovo Yoga/Legion fan monitoring")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20260330214624.3781789-1-rdunlap@infradead.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This driver provides fan speed monitoring for Lenovo Yoga, Legion, and
IdeaPad laptops by interfacing with the Embedded Controller (EC) via ACPI.
To address low-resolution sampling in Lenovo EC firmware, a Rate-Limited
Lag (RLLag) filter is implemented. The filter ensures a consistent physical
curve regardless of userspace polling frequency.
Hardware identification is performed via DMI-based quirk tables, which
map specific ACPI object paths and register widths (8-bit vs 16-bit)
deterministically.
Signed-off-by: Sergio Melas <sergiomelas@gmail.com>
Link: https://lore.kernel.org/r/20260327221602.18832-1-sergiomelas@gmail.com
[groeck: Dropped double empty line in Kconfig]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add I2C device IDs for Renesas RAA228942 and RAA228943.
At the Linux PMBus hwmon interface level currently supported by this
driver, these devices are compatible with the existing 2-rail non-TC
controllers, so devicetree will use fallback compatibles and no
dedicated OF match entries are needed.
Signed-off-by: Dawei Liu <dawei.liu.jy@renesas.com>
Link: https://lore.kernel.org/r/20260325090208.857-3-dawei.liu.jy@renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for the ITE IT8689E Super I/O chip. The IT8689E supports
newer autopwm, 12mV ADC, 16-bit fans, six fans, six PWM channels,
PWM frequency 2, six temperature inputs, AVCC3, temperature offset,
and fan on/off control.
Give it8689 its own GPIO configuration block in it87_find() rather
than sharing the it8620/it8628 block. The shared block reads
IT87_SIO_PINX2_REG and either marks IN3 as internal AVCC or skips
IN9. Because it8689 declares FEAT_AVCC3, IN9 is already marked as
always-internal before the GPIO block is reached; applying the PINX2
check would either create duplicate AVCC labels on IN3 and IN9 or
incorrectly skip IN9.
Also update Documentation/hwmon/it87.rst and drivers/hwmon/Kconfig to
document the newly supported chip.
Signed-off-by: Markus Hoffmann <markus@thehoffs.at>
Link: https://lore.kernel.org/r/20260322103301.18112-1-markus@thehoffs.at
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The LTC4282 driver does not implement an I2C .detect() callback, meaning no
I2C address scanning is performed. Update the documentation to
reflect this by replacing the listed I2C address ranges with "-".
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20260304-hwmon-ltc4282-minor-improvs-v1-1-344622924d3a@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add hardware monitoring support for the LattePanda Sigma SBC
(DFRobot, ITE IT8613E EC). The driver reads fan speed and
temperatures via direct port I/O, as the BIOS disables the
ACPI EC interface.
Signed-off-by: Mariano Abad <weimaraner@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
TMP110 and TMP113 temperature sensors are software compatible
with TMP102 sensor but have different accuracy (maximum error).
Signed-off-by: Flaviu Nistor <flaviu.nistor@gmail.com>
Link: https://lore.kernel.org/r/20260225095132.29954-1-flaviu.nistor@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
INA234 is register compatible to INA226 (excepting manufacturer and die
or device id registers) but has different scaling.
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Reviewed-by: Bence Csókás <bence98@sch.bme.hu> # v2
Tested-by: Jens Almer <bagawk@gmail.com>
Tested-by: Jonas Rebmann <jre@pengutronix.de>
Link: https://lore.kernel.org/r/20260220112024.97446-4-ian.ray@gehealthcare.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* Make sysfs entries documentation easier to maintain.
* Use multi-line enum.
* Correct "has_power_average" comment.
Create a new "has_update_interval" member for chips which support
averaging.
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Reviewed-by: Bence Csókás <bence98@sch.bme.hu> # v2
Tested-by: Jens Almer <bagawk@gmail.com>
Link: https://lore.kernel.org/r/20260220112024.97446-3-ian.ray@gehealthcare.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The adm1177 driver exposes the current alert threshold through
hwmon_curr_max_alarm. This violates the hwmon sysfs ABI, where
*_alarm attributes are read-only status flags and writable thresholds
must use currN_max.
The driver also stores the threshold internally in microamps, while
currN_max is defined in milliamps. Convert the threshold accordingly
on both the read and write paths.
Widen the cached threshold and related calculations to 64 bits so
that small shunt resistor values do not cause truncation or overflow.
Also use 64-bit arithmetic for the mA/uA conversions, clamp writes
to the range the hardware can represent, and propagate failures from
adm1177_write_alert_thr() instead of silently ignoring them.
Update the hwmon documentation to reflect the attribute rename and
the correct units returned by the driver.
Fixes: 09b08ac9e8 ("hwmon: (adm1177) Add ADM1177 Hot Swap Controller and Digital Power Monitor driver")
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20260325051246.28262-1-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The hwmon sysfs ABI expects tempN_crit_hyst to report the temperature at
which the critical condition clears, not the hysteresis delta from the
critical limit.
The peci cputemp driver currently returns tjmax - tcontrol for
crit_hyst_type, which is the hysteresis margin rather than the
corresponding absolute temperature.
Return tcontrol directly, and update the documentation accordingly.
Fixes: bf3608f338 ("hwmon: peci: Add cputemp driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260323002352.93417-2-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This reverts commit 443b39c82c.
I was just informed that this product is discontinued (without being
ever released to the market). Pull the plug and let's not waste any more
maintainers time.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20260223100459.844967-4-mwalle@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
