mirror of
https://github.com/torvalds/linux.git
synced 2026-10-07 19:16:02 +02:00
175a58668e
28419 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
91ec203513 |
Networking changes for 7.3.
Core & protocols
----------------
- A few steps lowering rtnl_lock dependence:
- per-netns netdev unregistration for select SW drivers
(e.g. veth, ipvlan, tunnels)
- rtnl_lock-less FIB rule changes (RTM_NEWRULE and RTM_DELRULE)
- prepare software drivers and TC qdiscs for rtnl_lock-less GET
- Support BIG TCP (>64kB TSO) in UDP tunnels (vxlan, geneve).
- Support buffers larger than PAGE_SIZE in devmem zero-copy API.
- Improve MPTCP handling of extreme memory pressure handling,
when out-of-order queue had to be pruned.
- Report the per-group user count via RTM_GETMULTICAST.
- Expose the route deletion reason in RTM_DELROUTE.
- Add a SO_RIGHTS_NOTRUNC option to UNIX sockets to enable more useful
handling of LSM denials when receiving SCM_RIGHTS messages: instead
of truncating the message at the first blocked fd, keep every fd slot
and store the LSM errno in the blocked slot.
- IPv6 Segment Routing - support looking up the post-encap SID
(address) in a different/specified routing table.
- Support PRP RedBox (interlink) creation.
- Support per-nexthop UDP dst port in VXLAN.
- Continue converting getsockopt callbacks in a number of protocols
to iov_iter.
Ethernet
--------
- Marge initial CXL support for AMD/Solarflare NICs (shared branch
with the CXL tree).
- New drivers:
- ADIN1140 10BASE-T1S MACPHY
- Initial skeleton of Intel iXD and ZTE Dinghai drivers.
- High-speed NICs:
- AMD/Pensando:
- support firmware flashing
- Cisco (enic):
- SR-IOV V2 admin channel and MBOX protocol
- Huawei (hns3):
- support for ethtool pfc_prevention_tout
- nVidia/Mellanox:
- support sharing bandwidth control across interfaces of
the same device
- Marvell (octeontx2-pf):
- link RQ page pools to netdev for Netlink stats
- Google vNIC:
- XDP metadata support for DQ RDA
- Microsoft vNIC:
- support forcing full-page RX buffers
- Other NICs:
- Synopsys IP:
- eic7700: support for eth1
- Microchip (lan743x):
- support for RMII interface
- Wangxun:
- support for ethtool -G and -C for VFs
- add Tx timeout and PCIe error handling
- Intel (igb/igc):
- RSS key get/set support
- support for forcing link speed without auto-negotiation
- Switches:
- NXP (dpaa2):
- support bonding/LAG offload
- Mediatek:
- mt7530: EN7528 support
- initial support for MT7628
- Micrel (ksz8/9):
- refactoring work to move towards library model
- PTP support for KSZ8463
- nVidia/Mellanox:
- support rtnl-lock-less ethtool callbacks
- Realtek:
- rtl8366rb: use generic RTL83xx code
- support SGMII and HSGMII for RTL8367S
- PHYs:
- Airoha:
- EcoNet EN7528 PHY support
- DAPU Telecom
- DAPU Telecom DAP8211R(I) Gigabit PHY support
- Realtek:
- support RTL8261C_CG
- support RTL8261D
Wireless
--------
- nl80211: per-link statistics support for multi-link operation
- mac80211: AQL/airtime-fairness support for multicast
- Merge Peripheral Authentication Service (PAS) / TEE support
for ath12k (shared branch with the firmware/qcom tree).
- New drivers:
- mm81x for Morse Micro Long-Range S1G devices
- nxpwifi for NXP devices (mostly forked off from mwifiex)
- Driver changes:
- Broadcom (brcmfmac):
- DPP support, some Cypress part update
- MediaTek (mt76):
- mt7928 support
- mt7925 NAN support
- mt7996 AP powersave improvements
- Qualcomm (ath12k):
- much kernel infrastructure integration work
- AHB platform MultiPD support
- Realtek (rt89):
- LED support
- RTL8922DE support
- dual-BT coex for RTL8922D
- Intel:
- new FW version support
Bluetooth
---------
- HCI: add support for Shorter Connection Interval (SCI) feature.
- af_bluetooth: add minimal context analysis annotations.
- Driver changes:
- Intel:
- add Bluetooth SAR revision 2 support
- add vendor_reset PCI sysfs for PLDR
- Mediatek:
- add USB IDs for MT7902 and MT7922 devices
- Realtek:
- add USB IDs for 8761CU and 8852BE devices
- NXP:
- add M.2 Bluetooth device support using pwrseq
Misc
----
- DPLL support for manual/numerical oscillator control (NCO)
(implement in zl3073x).
- MCTP support for MCTP over USB v1.1 (DMTF DSP0283).
- Power-over-Ethernet: support Realtek PSE controllers.
- Remove the IBM EHEA driver.
- Remove tulip/xircom_cb driver.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=zDto
-----END PGP SIGNATURE-----
Merge tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"One of the 'small improvements all over the place' releases for us.
It's hard to draw any direct comparisons because summer vacations
disrupted our patch processing (and presumably - generation) quite a
bit.
Quick and dirty count suggests we (Paolo and I) merged a very similar
number of net (632) and net-next (648) patches. This is not telling
the full story either because 1/3 to 1/2 of the net-next patches also
*seem* like AI-driven low priority fixes, cleanups and clarifications.
We are completely overwhelmed, of course. The glimmer of hope is that
we secured sufficient LLM budget and access (thank you Meta!) to run
reviews with multiple frontier models on each patch. This eliminates
some hallucinations. That said, in terms of review, the LLMs can only
do so much.
The sad truth is that our APIs (especially for rare events like PCIe
errors, timeouts etc) have always been racy, and now LLMs don't let us
ignore that. I expect our direction for the next release will be to
tweak the reviews a little bit more, but start shifting focus to
letting the LLMs take care of the busy work - managing patchwork,
automating common process complaints, editing commit messages, and
maybe applying patches which already got "reviewed-by" tags from
people we trust...
Core & protocols:
- A few steps lowering rtnl_lock dependence:
- per-netns netdev unregistration for select SW drivers (e.g.
veth, ipvlan, tunnels)
- rtnl_lock-less FIB rule changes (RTM_NEWRULE and RTM_DELRULE)
- prepare software drivers and TC qdiscs for rtnl_lock-less GET
- Support BIG TCP (>64kB TSO) in UDP tunnels (vxlan, geneve)
- Support buffers larger than PAGE_SIZE in devmem zero-copy API
- Improve MPTCP handling of extreme memory pressure handling, when
out-of-order queue had to be pruned
- Report the per-group user count via RTM_GETMULTICAST
- Expose the route deletion reason in RTM_DELROUTE
- Add a SO_RIGHTS_NOTRUNC option to UNIX sockets to enable more
useful handling of LSM denials when receiving SCM_RIGHTS messages:
instead of truncating the message at the first blocked fd, keep
every fd slot and store the LSM errno in the blocked slot
- IPv6 Segment Routing - support looking up the post-encap SID
(address) in a different/specified routing table
- Support PRP RedBox (interlink) creation
- Support per-nexthop UDP dst port in VXLAN
- Continue converting getsockopt callbacks in a number of protocols
to iov_iter
Ethernet:
- Merge initial CXL support for AMD/Solarflare NICs (shared branch
with the CXL tree)
- New drivers:
- ADIN1140 10BASE-T1S MACPHY
- Initial skeleton of Intel iXD and ZTE Dinghai drivers
- High-speed NICs:
- AMD/Pensando:
- support firmware flashing
- Cisco (enic):
- SR-IOV V2 admin channel and MBOX protocol
- Huawei (hns3):
- support for ethtool pfc_prevention_tout
- nVidia/Mellanox:
- support sharing bandwidth control across interfaces
of the same device
- Marvell (octeontx2-pf):
- link RQ page pools to netdev for Netlink stats
- Google vNIC:
- XDP metadata support for DQ RDA
- Microsoft vNIC:
- support forcing full-page RX buffers
- Other NICs:
- Synopsys IP:
- eic7700: support for eth1
- Microchip (lan743x):
- support for RMII interface
- Wangxun:
- support for ethtool -G and -C for VFs
- add Tx timeout and PCIe error handling
- Intel (igb/igc):
- RSS key get/set support
- support for forcing link speed without auto-negotiation
- Switches:
- NXP (dpaa2):
- support bonding/LAG offload
- Mediatek:
- mt7530: EN7528 support
- initial support for MT7628
- Micrel (ksz8/9):
- refactoring work to move towards library model
- PTP support for KSZ8463
- nVidia/Mellanox:
- support rtnl-lock-less ethtool callbacks
- Realtek:
- rtl8366rb: use generic RTL83xx code
- support SGMII and HSGMII for RTL8367S
- PHYs:
- Airoha:
- EcoNet EN7528 PHY support
- DAPU Telecom
- DAPU Telecom DAP8211R(I) Gigabit PHY support
- Realtek:
- support RTL8261C_CG
- support RTL8261D
Wireless:
- nl80211: per-link statistics support for multi-link operation
- mac80211: AQL/airtime-fairness support for multicast
- Merge Peripheral Authentication Service (PAS) / TEE support for
ath12k (shared branch with the firmware/qcom tree)
- New drivers:
- mm81x for Morse Micro Long-Range S1G devices
- nxpwifi for NXP devices (mostly forked off from mwifiex)
- Driver changes:
- Broadcom (brcmfmac):
- DPP support, some Cypress part update
- MediaTek (mt76):
- mt7928 support
- mt7925 NAN support
- mt7996 AP powersave improvements
- Qualcomm (ath12k):
- much kernel infrastructure integration work
- AHB platform MultiPD support
- Realtek (rt89):
- LED support
- RTL8922DE support
- dual-BT coex for RTL8922D
- Intel:
- new FW version support
Bluetooth:
- HCI: add support for Shorter Connection Interval (SCI) feature
- af_bluetooth: add minimal context analysis annotations
- Driver changes:
- Intel:
- add Bluetooth SAR revision 2 support
- add vendor_reset PCI sysfs for PLDR
- Mediatek:
- add USB IDs for MT7902 and MT7922 devices
- Realtek:
- add USB IDs for 8761CU and 8852BE devices
- NXP:
- add M.2 Bluetooth device support using pwrseq
Misc:
- DPLL support for manual/numerical oscillator control (NCO)
(implement in zl3073x)
- MCTP support for MCTP over USB v1.1 (DMTF DSP0283)
- Power-over-Ethernet: support Realtek PSE controllers
- Remove the IBM EHEA driver
- Remove tulip/xircom_cb driver"
* tag 'net-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1433 commits)
net/mlx5e: do not HW-GRO coalesce small frames
net: openvswitch: fix nf_connlabels leak in ovs_ct_init
net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs()
net: openvswitch: fix flow mask use-after-free on flow deletion
sctp: stop processing a packet once its association is deleted
dpll: zl3073x: add PTP clock support
dpll: zl3073x: add channel ToD, phase step and TIE operations
dpll: zl3073x: scale poll interval proportionally to timeout
ptp: vmclock: prevent read-only mappings from becoming writable
ipv4: reject undersized MTUs in ip_do_fragment()
bonding: initialize err for empty target lists
net: dsa: initial support for MT7628 embedded switch
net: dsa: initial MT7628 tagging driver
net: phy: mediatek: add phy driver for MT7628 built-in Fast Ethernet PHYs
dt-bindings: net: dsa: add MT7628 ESW
net: pse-pd: realtek-pse-mcu: add UART transport
net: pse-pd: realtek-pse-mcu: add I2C transport
net: pse-pd: add Realtek PSE MCU core
dt-bindings: net: pse-pd: add bindings for Realtek PSE MCU
vsock: use sock_error() to consume sk_err after a failed connect
...
|
||
|
Linus Torvalds
|
59e6295fac |
Driver core changes for 7.3-rc1
- container_of:
- Apply typeof_member(), remove the local __mptr variable to eliminate
variable shadowing warnings on nested container_of() calls, and remove
unnecessary parentheses.
- core:
- Add driver name to probe debug print for initcall_debug.
- Avoid repeatedly printing the same 'Fixed dependency cycle' log.
- Unwind device_add() on attribute creation failure in
attribute_container_add_class_device().
- Remove statistics group if encryption group creation fails in
transport_add_class_device().
- debugfs:
- Fix lockdown check for mmap_prepare().
- Warn if file creation failed due to uninitialized debugfs.
- device property:
- Implement fw_devlink support for software nodes by adding
software_node_add_links(), which creates fwnode links from DEV_PROP_REF
properties to enable automatic probe ordering. Add kunit-managed fwnode
helpers and test coverage.
- Fix infinite loop in fwnode_for_each_child_node() when the secondary fwnode
has more than one child. Add test cases.
- Fix out-of-bounds access in software_node_get_reference_args() when called
with index -1 (UINT_MAX).
- Refactor to use RAII approach with __free().
- Add Bartosz Golaszewski as software node reviewer.
- firmware loader:
- Fix race where a sysfs fallback request can complete before being queued as
pending, leading to a use-after-free on the next fallback request.
- Reject 0-size built-in firmware and fail the build on empty firmware files
in CONFIG_EXTRA_FIRMWARE.
- kobject:
- Provide __KOBJ_ATTR() and __KOBJ_ATTR_RO/WO() initialization macros and
allow the constification of kobject attributes, enabling them to reside in
read-only memory.
- platform:
- Provide platform_device_set_of_node(), platform_device_set_fwnode(), and
platform_device_set_of_node_from_dev() helpers that encapsulate firmware
node reference counting for dynamically allocated platform devices. Convert
all in-tree users that manually assigned dev.of_node or dev.fwnode, fixing a
pre-existing refcount bug in powermac. Switch to counting references of all
firmware node types, not only OF nodes.
- Unify the release path for dynamically allocated platform devices by
removing platform_device_release_full(). Amend the fwnode setter API
contract to warn if a primary software node is overwritten. Add KUnit tests
for correct software node removal on device unregistration.
- Rust:
- Auxiliary:
- Add registration_data_with() closure-based API for invariant ForLt types.
- Debugfs:
- Migrate BinaryWriter and BinaryReaderMut trait requirements from
kernel::transmute traits to zerocopy traits.
- Device:
- Add BoundInternal device context and InternalBoundContext trait for bus
abstractions that need internal access to a bound device.
- Make the lifetime on Core and CoreInternal invariant to prevent coercion
to shorter lifetimes.
- Devres:
- Fix race between concurrent revokers where the losing revoker could return
before the winning revoker finished dropping the inner data, causing
use-after-free.
- Ensure revocation is complete before the device finishes unbinding by
making the synchronization bidirectional.
- Add DevresLt<F: ForLt>, a wrapper around Devres that shortens 'static back
to the caller's borrow scope. Implement ForLt and CovariantForLt for Bar,
IoMem, and ExclusiveIoMem.
- Driver:
- Switch from index-based to pointer-based device ID info lookup, storing
static references in driver_data. Centralize device ID handling in
device_id.rs, removing the open-coded ACPI/OF matching logic and duplicate
ID table from driver.rs.
- I/O:
- Make I/O regions typed (with a dynamically-sized Region type for the
existing untyped case), create view types representing subregions of a
mapped I/O region, and add io_project!() for safely creating subviews.
- Split Io into a base trait (IoBase) and an extension trait (Io) with a
blanket implementation, preventing implementers from overriding provided
methods that unsafe code relies on.
- Add a SysMem backend for shared system memory with volatile access, and
make Coherent implement Io via an I/O view type. Add IoSysMap as sum type
of Mmio and SysMem. Add copying methods (memcpy_{from,to}io()) and
read_val()/write_val() for typed access.
- Replace dma_read!()/dma_write!() with io_read!()/io_write!() for
primitives and copying methods for aggregates; drop the old macros.
Convert nova-core to use I/O projection.
- Fix internal shortcut rule dispatch in the register!() macro, remove
unused rule arguments, and use path fragments for alias destinations.
- IRQ:
- Make irq::Registration compatible with lifetime-bound drivers by
removing the 'static bound on Handler/ThreadedHandler and
replacing Devres<RegistrationInner> with direct
request_irq()/free_irq() calls. Handlers can now directly own
lifetime-bound device resources.
- PCI:
- Convert IrqVectorRegistration to a lifetime-annotated owning type,
giving drivers explicit control over the allocation lifetime.
IrqVector embeds a resolved IrqRequest, making the conversion
infallible. Remove the redundant
request_irq()/request_threaded_irq() wrappers from pci::Device.
- Add pci_irq_type() C helper and expose it via irq_type() on
IrqVectorRegistration and IrqVector, returning PCI_IRQ_MSIX, PCI_IRQ_MSI,
or PCI_IRQ_INTX.
- Mark pci::Device refcount methods inline.
- Serdev:
- Add Rust abstractions for the serial device bus, including serdev::Driver
trait, serdev::Device wrapping struct serdev_device, and serdev::Adapter
implementing RegistrationOps. Includes a sample driver. Markus Probst
takes over as serdev maintainer for both C and Rust code.
- Misc:
- Split ForLt into a base trait (providing the Of<'a> GAT) and an unsafe
CovariantForLt subtrait guaranteeing covariance, enabling invariant types
(e.g. those containing Mutex<&'bound T>) to participate in the ForLt
abstraction.
- Fix Coherent read past EOF returning -ERANGE instead of zero.
- Fix firmware example UB by avoiding null-pointer ARef.
- misc:
- Avoid iattr allocation in kernfs listxattr by using kernfs_iattrs_noalloc().
- Unregister SoC bus on early device registration failure.
- Remove unused DMA_FENCE_TRACE Kconfig symbol.
- Fix /sys/module path in comment.
- Refactor ISA bus init to remove nested blocks.
- Remove redundant nodemask clears in numa_init().
- Add kernel-doc for fwnode_operations and sys_soc.h, mark internal property
data as private for kernel-doc, and add property.h/fwnode.h to driver-api
infrastructure docs.
- Add MAINTAINERS entry for sys_soc.h.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaoSPugAKCRBFlHeO1qrK
LlBrAP958EaYZVyfAsqq0EyHv86ahXKWoDDvkwbRUZA5CfV9tAD/bMWVtPLRYaaq
eNEZT7p5w3Haezh61H3c5zpuwFNMTA0=
=VRIa
-----END PGP SIGNATURE-----
Merge tag 'driver-core-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"container_of:
- Apply typeof_member(), remove the local __mptr variable to
eliminate variable shadowing warnings on nested container_of()
calls, and remove unnecessary parentheses
core:
- Add driver name to probe debug print for initcall_debug
- Avoid repeatedly printing the same 'Fixed dependency cycle' log
- Unwind device_add() on attribute creation failure in
attribute_container_add_class_device()
- Remove statistics group if encryption group creation fails in
transport_add_class_device()
debugfs:
- Fix lockdown check for mmap_prepare()
- Warn if file creation failed due to uninitialized debugfs
device property:
- Implement fw_devlink support for software nodes by adding
software_node_add_links(), which creates fwnode links from
DEV_PROP_REF properties to enable automatic probe ordering. Add
kunit-managed fwnode helpers and test coverage
- Fix infinite loop in fwnode_for_each_child_node() when the
secondary fwnode has more than one child. Add test cases
- Fix out-of-bounds access in software_node_get_reference_args() when
called with index -1 (UINT_MAX)
- Refactor to use RAII approach with __free()
- Add Bartosz Golaszewski as software node reviewer
firmware loader:
- Fix race where a sysfs fallback request can complete before being
queued as pending, leading to a use-after-free on the next fallback
request
- Reject 0-size built-in firmware and fail the build on empty
firmware files in CONFIG_EXTRA_FIRMWARE
kobject:
- Provide __KOBJ_ATTR() and __KOBJ_ATTR_RO/WO() initialization macros
and allow the constification of kobject attributes, enabling them
to reside in read-only memory
platform:
- Provide platform_device_set_of_node(), platform_device_set_fwnode(),
and platform_device_set_of_node_from_dev() helpers that encapsulate
firmware node reference counting for dynamically allocated platform
devices
Convert all in-tree users that manually assigned dev.of_node or
dev.fwnode, fixing a pre-existing refcount bug in powermac. Switch
to counting references of all firmware node types, not only OF
nodes
- Unify the release path for dynamically allocated platform devices
by removing platform_device_release_full(). Amend the fwnode setter
API contract to warn if a primary software node is overwritten. Add
KUnit tests for correct software node removal on device
unregistration
Rust:
- Auxiliary:
- Add registration_data_with() closure-based API for invariant
ForLt types
- Debugfs:
- Migrate BinaryWriter and BinaryReaderMut trait requirements
from kernel::transmute traits to zerocopy traits
- Device:
- Add BoundInternal device context and InternalBoundContext trait
for bus abstractions that need internal access to a bound
device.
- Make the lifetime on Core and CoreInternal invariant to prevent
coercion to shorter lifetimes
- Devres:
- Fix race between concurrent revokers where the losing revoker
could return before the winning revoker finished dropping the
inner data, causing use-after-free.
- Ensure revocation is complete before the device finishes
unbinding by making the synchronization bidirectional.
- Add DevresLt<F: ForLt>, a wrapper around Devres that shortens
'static back to the caller's borrow scope. Implement ForLt and
CovariantForLt for Bar, IoMem, and ExclusiveIoMem
- Driver:
- Switch from index-based to pointer-based device ID info lookup,
storing static references in driver_data. Centralize device ID
handling in device_id.rs, removing the open-coded ACPI/OF
matching logic and duplicate ID table from driver.rs
- I/O:
- Make I/O regions typed (with a dynamically-sized Region type
for the existing untyped case), create view types representing
subregions of a mapped I/O region, and add io_project!() for
safely creating subviews.
- Split Io into a base trait (IoBase) and an extension trait (Io)
with a blanket implementation, preventing implementers from
overriding provided methods that unsafe code relies on.
- Add a SysMem backend for shared system memory with volatile
access, and make Coherent implement Io via an I/O view type.
Add IoSysMap as sum type of Mmio and SysMem. Add copying
methods (memcpy_{from,to}io()) and read_val()/write_val() for
typed access.
- Replace dma_read!()/dma_write!() with io_read!()/io_write!()
for primitives and copying methods for aggregates; drop the old
macros. Convert nova-core to use I/O projection.
- Fix internal shortcut rule dispatch in the register!() macro,
remove unused rule arguments, and use path fragments for alias
destinations
- IRQ:
- Make irq::Registration compatible with lifetime-bound drivers
by removing the 'static bound on Handler/ThreadedHandler and
replacing Devres<RegistrationInner> with direct
request_irq()/free_irq() calls. Handlers can now directly own
lifetime-bound device resources
- PCI:
- Convert IrqVectorRegistration to a lifetime-annotated owning
type, giving drivers explicit control over the allocation
lifetime. IrqVector embeds a resolved IrqRequest, making the
conversion infallible. Remove the redundant
request_irq()/request_threaded_irq() wrappers from pci::Device.
- Add pci_irq_type() C helper and expose it via irq_type() on
IrqVectorRegistration and IrqVector, returning PCI_IRQ_MSIX,
PCI_IRQ_MSI, or PCI_IRQ_INTX.
- Mark pci::Device refcount methods inline
- Serdev:
- Add Rust abstractions for the serial device bus, including
serdev::Driver trait, serdev::Device wrapping struct
serdev_device, and serdev::Adapter implementing
RegistrationOps. Includes a sample driver. Markus Probst takes
over as serdev maintainer for both C and Rust code
- Misc:
- Split ForLt into a base trait (providing the Of<'a> GAT) and an
unsafe CovariantForLt subtrait guaranteeing covariance,
enabling invariant types (e.g. those containing Mutex<&'bound T>)
to participate in the ForLt abstraction.
- Fix Coherent read past EOF returning -ERANGE instead of zero.
- Fix firmware example UB by avoiding null-pointer ARef
misc:
- Avoid iattr allocation in kernfs listxattr by using
kernfs_iattrs_noalloc().
- Unregister SoC bus on early device registration failure.
- Remove unused DMA_FENCE_TRACE Kconfig symbol.
- Fix /sys/module path in comment.
- Refactor ISA bus init to remove nested blocks.
- Remove redundant nodemask clears in numa_init().
- Add kernel-doc for fwnode_operations and sys_soc.h, mark
internal property data as private for kernel-doc, and add
property.h/fwnode.h to driver-api infrastructure docs.
- Add MAINTAINERS entry for sys_soc.h"
* tag 'driver-core-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (129 commits)
rust: pci: expose the allocated interrupt type
PCI: Add pci_irq_type() to query the allocated interrupt type
rust: pci: remove request_irq() and request_threaded_irq() from Device
rust: pci: resolve IRQ in index() and embed IrqRequest in IrqVector
rust: pci: convert IrqVectorRegistration to a lifetime-managed owning type
kernfs: avoid iattr allocation in listxattr
rust: serdev: use ThisModule::as_ptr() instead of field access
ACPI/IORT: use platform_device_set_fwnode()
ACPI/APMT: use platform_device_set_fwnode()
firmware_loader: do not queue completed sysfs fallback requests
rust: pci: Mark Device refcount methods inline
rust: irq: make Registration compatible with lifetime-bound drivers
rust: net/phy: remove expansion from doc
rust: dma: return zero for Coherent reads past EOF
rust: io: register: use path fragment for alias destination
rust: io: register: remove unused rule arguments
rust: io: register: dispatch shortcut rules internally
MAINTAINERS: add sys_soc.h to DRIVER CORE
rust: debugfs: remove unsafe blocks from traits impl for Vec
rust: debugfs: migrate debugfs traits requirements to zerocopy
...
|
||
|
Linus Torvalds
|
368cf60c36 |
soc: drivers for 7.3
The SoC driver changes once more consist of many small fixes and
cleanups, that are to a large part the result of automated testing. On
platform specific drivers, this includes SoC specific code for xilinx,
freescale/nxp, qualcomm, TI, aspeed, omap, tegra, samsung, rockchip,
renesas, ixp4xx. In firmware drivers, we see a similar picture for
SCMI and qcomtee.
Aside from these, we see actual new hardware support in a few
areas:
- The Apple platform gets a new driver for low power states
- Updates to Qualcomm platform drivers add several new
hardware specific features and additional SoCs.
- Amlogic SoC support for A1 and T7 is added
- The Mediatek MMSYS driver is refactored as a cleanup.
-----BEGIN PGP SIGNATURE-----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=NeRc
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The SoC driver changes once more consist of many small fixes and
cleanups, that are to a large part the result of automated testing.
On platform specific drivers, this includes SoC specific code for
xilinx, freescale/nxp, qualcomm, TI, aspeed, omap, tegra, samsung,
rockchip, renesas, ixp4xx. In firmware drivers, we see a similar
picture for SCMI and qcomtee.
Aside from these, we see actual new hardware support in a few areas:
- The Apple platform gets a new driver for low power states
- Updates to Qualcomm platform drivers add several new hardware
specific features and additional SoCs.
- Amlogic SoC support for A1 and T7 is added
- The Mediatek MMSYS driver is refactored as a cleanup"
* tag 'soc-drivers-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (157 commits)
soc: qcom: make QCOM_PDR_MSG selectable
soc: qcom: ubwc: Fix missing include
soc: qcom: ubwc: Fix link error when QCOM_SMEM=n
media: iris: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
drm/msm: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
dt-bindings: arm: qcom,ids: Add SoC ID for Snapdragon SDM 850
firmware: xilinx: Clear firmware notifiers across kexec transitions
firmware: xilinx: Release all peripheral devices from firmware
firmware: xilinx: Add support to clear EL3 PM state
firmware: xilinx: Propagate actual error from feature check
firmware: xilinx: Use TF-A feature check for TF-A-specific APIs
bus: fsl-mc: drop unused assignment of acpi_device_id::driver_data
soc: fsl: qe: check platform_driver_register() in qe_ic_of_init()
phy: lynx-10g: use RCW override procedure for dynamic protocol change
soc: fsl: guts: implement the RCW override procedure
dt-bindings: fsl: layerscape-dcfg: define DCFG_DCSR region
soc: fsl: guts: make fsl_soc_data available after fsl_guts_init()
soc: fsl: guts: make it easier to determine on which SoC we are running
soc: fsl: guts: add a central fsl_guts_read() function
soc: fsl: guts: add a global structure to hold state
...
|
||
|
Jakub Kicinski
|
3da8c3c8b8 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-7.2-rc8). No conflicts. Adjacent changes: drivers/net/ethernet/wangxun/ngbe/ngbe_main.c |
||
|
Arnd Bergmann
|
30502a6a72 |
FSL SOC Changes for 7.3
Freescale QUICC Engine: - Use generic I/O helpers in interrupt controller for IO Ports - Move CONFIG_QE_GPIO out of powerpc - Fix DT scan for GPIO nodes - Convert IO ports interrupt controller to generic IRQ chip - Add support of IRQs in GPIO controller - Implement get_direction() in GPIO controller - Check platform_driver_register() in interrupt controller for IO Ports Data Path I/O: - Replace maintainer - Remove redundant dev_err() - Fix kernel-doc typos Freescale Management Complex: - Use strscpy() to copy strings into arrays - Remove redundant dev_err() - Drop unused assignment of acpi_device_id::driver_data Other changes: - Add kernel and device tree binding support for RCW override, completing the SerDes PHY driver functionality - Fix kernel-doc warnings and typos in DPAA header -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTH/wu6mIr0ZW+Vui/dkHAmvKvPUwUCanjJsQAKCRDdkHAmvKvP UwszAQDD8kadgq4T9kUl7LO9TzCfPbG39oyjY5b1xrtEmqPa2QEA55gxY7ker9KC GXDq12bKiI79q1C5acQOvvGtRzn50g4= =gVuJ -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmp5jCwACgkQmmx57+YA GNnQ1RAAoXeSmgQv7IV9lh9gxm/L5HaIHy8VZhOH++dWgNT7o4imnhg1v1Lf9wT9 cvIA17WlkcTDvF7yPpsli8BKpb3ohWlmiliuvkJBtFXMOawToOPA1JaMo3bwWdtV UDqHJGvaQ3fY0nfJZHUn3F6m43X0fpl1X7jqMwRu0n59G9grSN0a1JzH5fcvhzLc R3MZX8Xf0MkB7NnilSm6p9+NR7awFFOt+2F1MIaVJrTBCQsLQ7TZJ2PXznMGUqlZ E/eubTe4l3H3Tvf9Ymeoqn+eD9DaV4/thqtWkZieRuQ7sRKgpLLjLVIMmEy4C50B fVQBhRj3puj67qwxGbgfuQ0rO80e7Enx4rx4FP2wOEyz1srKMr5gaTAQfan8shW1 CZEAbx8OniBfFuLdOHueOjwyONYA2KWfvFcfhEaR1QXU5EFteUwOXKKQsA7A7j3i 9RhPkXukIoU/BG59ZspR9s5cegh4C54ATsrxkgnW2tCMSHPN27Zfn+UnTDQ0MGYj PIlrftuqcFWUjgjn7vdASwVEsyoPr1/c79GwmW6/8Wna3rZsJEKwEX47FDNxan96 /cF244Ljrg6e3SRVhuyCNqGgbCi/v6TMe3L5niKoDBLnpQh+WU9HRFTWUPJ/bOBz 8CxrN1kZa2oZU8IhZSMI1O9T8Y77yPElt8wEIetpxJ+DKK5fPpw= =76G2 -----END PGP SIGNATURE----- Merge tag 'soc_fsl-7.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux into soc/drivers FSL SOC Changes for 7.3 Freescale QUICC Engine: - Use generic I/O helpers in interrupt controller for IO Ports - Move CONFIG_QE_GPIO out of powerpc - Fix DT scan for GPIO nodes - Convert IO ports interrupt controller to generic IRQ chip - Add support of IRQs in GPIO controller - Implement get_direction() in GPIO controller - Check platform_driver_register() in interrupt controller for IO Ports Data Path I/O: - Replace maintainer - Remove redundant dev_err() - Fix kernel-doc typos Freescale Management Complex: - Use strscpy() to copy strings into arrays - Remove redundant dev_err() - Drop unused assignment of acpi_device_id::driver_data Other changes: - Add kernel and device tree binding support for RCW override, completing the SerDes PHY driver functionality - Fix kernel-doc warnings and typos in DPAA header * tag 'soc_fsl-7.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux: (31 commits) bus: fsl-mc: drop unused assignment of acpi_device_id::driver_data soc: fsl: qe: check platform_driver_register() in qe_ic_of_init() phy: lynx-10g: use RCW override procedure for dynamic protocol change soc: fsl: guts: implement the RCW override procedure dt-bindings: fsl: layerscape-dcfg: define DCFG_DCSR region soc: fsl: guts: make fsl_soc_data available after fsl_guts_init() soc: fsl: guts: make it easier to determine on which SoC we are running soc: fsl: guts: add a central fsl_guts_read() function soc: fsl: guts: add a global structure to hold state soc: fsl: guts: use a macro to encode the DCFG CCSR space soc: fsl: guts: perform fsl_guts_init() error teardown in reverse order of setup soc: fsl: dpio: fix kernel-doc typos soc: fsl: fix kernel-doc warnings and typos bus: fsl-mc: Remove redundant dev_err() soc: fsl: qe: Add support of IRQs in QE GPIO soc: fsl: qe: Rename irq variable to parent_irq soc: fsl: qe: Convert to generic IRQ chip soc: fsl: qe: Handle spurious interrupts soc: fsl: qe: Iterate over all pending interrupts in cascade handler soc: fsl: qe: Use generic_handle_domain_irq() ... Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Danilo Krummrich
|
dbaafe9cc5 |
Linux 7.2-rc7
-----BEGIN PGP SIGNATURE----- iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmp49yoeHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1WIH/1SD1rNIb4Prf0C7 Rk9Hz0IZ3uYNe1Xi+Ozv3zQUuLB6d7ewl9e4zyHHYT4eeIKvBZv9jtIF3QH4ty5X JB9Gy62WICtqIEkzzt2bkcV1byFmKz2+BLv04fgcyTXEGOEByCDiZ3/N3kSJOqvg YxsGOmKkQSTavFLSe96Gj2pgchJqZ6j3qucDO6GrPOo8depP2kfzxfaJbXix0HEZ ln08X9hgZDxy4I98PmSaaJsK2R/i6T6jQdA3i8DnSbbyNhLn+3FK6gkP08ZEpaor 82WwJf+MVCLHXLYDy0aYOUDHpkNkkJWOj45A2Hv9JkOupGcUpyPGr82l4yh/MrxC +kM28xs= =rIbd -----END PGP SIGNATURE----- Merge tag 'v7.2-rc7' into driver-core-next We need the driver-core fixes in here as well to build on top of. Signed-off-by: Danilo Krummrich <dakr@kernel.org> |
||
|
Nguyen Quang Le Kien
|
b5b02ce657 |
usb: atm: cxacru: fix use-after-free in cxacru_poll_status
In cxacru_unbind(), cancel_delayed_work_sync() was conditionally skipped when poll_state was CXPOLL_STOPPED. However, a work item previously scheduled when poll_state was CXPOLL_POLLING may still be pending in the workqueue at the time poll_state transitions to CXPOLL_STOPPED. Skipping cancel_delayed_work_sync() in this case allows the work to fire after cxacru_data is freed, causing a use-after-free when cxacru_poll_status() attempts to acquire instance->poll_state_serialize. Fix this by always calling cancel_delayed_work_sync() regardless of poll_state, ensuring no pending or in-flight work can access the freed instance. Cc: stable+noautosel@kernel.org # untested fix to a driver init path race Reported-by: syzbot+24eb38c789655fc43663@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=24eb38c789655fc43663 Signed-off-by: Nguyen Quang Le Kien <khiemtranzo532001@gmail.com> Link: https://patch.msgid.link/20260803101716.2592486-1-khiemtranzo532001@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Aleksandr Nogikh
|
d87cabf0b6 |
usb: atm: cxacru: properly kill rcv_urb on error in cxacru_cm()
If cxacru_cm() encounters an error while submitting or waiting for snd_urb, it aborts and returns the error without killing the already submitted rcv_urb. This leaves the rcv_urb active. When this happens during initialization (e.g., in cxacru_atm_start()), the driver may ignore the error and proceed to call cxacru_poll_status(), which invokes cxacru_cm() again. Attempting to submit the still-active rcv_urb triggers a warning in usb_submit_urb(): cxacru 1-1:1.0: send of cm 0x84 failed (-104) ATM dev 0: cxacru_atm_start: CHIP_ADSL_LINE_START returned -104 ------------[ cut here ]------------ URB ffff88812658d200 submitted while active WARNING: drivers/usb/core/urb.c:379 at usb_submit_urb+0x79/0x18b0 drivers/usb/core/urb.c:379 ... Call Trace: <TASK> cxacru_cm+0x21a/0xf10 drivers/usb/atm/cxacru.c:631 cxacru_cm_get_array drivers/usb/atm/cxacru.c:722 [inline] cxacru_poll_status+0x178/0x1110 drivers/usb/atm/cxacru.c:828 cxacru_atm_start+0x185/0x360 drivers/usb/atm/cxacru.c:814 usbatm_atm_init+0x144/0x3a0 drivers/usb/atm/usbatm.c:927 usbatm_usb_probe+0x15cb/0x1db0 drivers/usb/atm/usbatm.c:1178 cxacru_usb_probe+0x17f/0x220 drivers/usb/atm/cxacru.c:1370 ... To fix this, ensure that rcv_urb is properly killed if cxacru_cm() aborts early. We can safely call usb_kill_urb() on rcv_urb in the error path, as it is safe to call even if the URB is not active (e.g., if it failed to submit in the first place, or if it already completed). Cc: stable+noautosel@kernel.org # untested fix to unlikely driver error path Reported-by: syzbot+c9dff578c3a41775176a@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c9dff578c3a41775176a Link: https://syzkaller.appspot.com/ai_job?id=75fec6f2-c8a6-43b1-b184-4d26baba86cc Signed-off-by: Aleksandr Nogikh <nogikh@google.com> Link: https://patch.msgid.link/91edfa4c-a63d-400c-9f00-31f3e1f98c00@mail.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Subasri S
|
37a5e12011 |
usb: atm: ueagle-atm: fix array-index-out-of-bounds in uea_bind()
Add a bounds check on the global variable modem_index before using it as an index in sync_wait[] array whose size is NB_MODEM. Cc: stable+noautosel@kernel.org # untested fix to a driver init path race Reported-by: syzbot+92f5bf49bf4ac75223ca@syzkaller.appspotmail.com Tested-by: syzbot+92f5bf49bf4ac75223ca@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=92f5bf49bf4ac75223ca Signed-off-by: Subasri S <subasris1210@gmail.com> Link: https://patch.msgid.link/20260802-usb-ueagble-atm-v1-1-340f085b04aa@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Lachlan Hodges
|
3d26cd1f3f |
usb: xhci: use BIT_ULL for CRCR bits to fix incorrect 64bit mask
xhci is unusable on some systems after driver switched to BIT() macro. Upper 32bits of 64bit CRCR command register are unintentionally cleared. Seen on a raspberry pi 4B compiled for arm32. The main symptoms were the following log message: [ 0.549897] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-02-25T12:11:39 [ 0.626859] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.626889] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 0.812619] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000200000000890 [ 0.813188] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.813203] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 0.813219] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 0.813602] hub 1-0:1.0: USB hub found [ 0.814052] hub 2-0:1.0: USB hub found [ 0.952714] xhci_hcd 0000:01:00.0: ERROR mismatched command completion event Additionally running lsusb just hangs. Running the same kernel compiled for aarch64 worked fine. Bisected to the commit in the Fixes line. Additionally a USB device plugged in to the USB3.0 (or 2.0) did not enumerate. Once this patch is applied the USB device enumerates properly. The CRCR register is 64 bits wide - commit |
||
|
Ishaan Dandekar
|
f3988e68fc |
usb: quirks: Add ShanWan gamepad to quirk list
The ShanWan Wireless Gamepad (dongle ID 2563:0575) crashes with a -71 EPROTO error during standard enumeration because it expects a 255-byte initial configuration request. Add this device to the quirk list to use the USB_QUIRK_WINDOWS_CONFIG_REQ_SIZE flag. Signed-off-by: Ishaan Dandekar <ishaan.dandekar@gmail.com> Cc: stable <stable@kernel.org> Link: https://patch.msgid.link/20260802120128.38302-1-ishaan.dandekar@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Nikhil Solanke
|
37a6e2f9c3 |
usb: hub: Split announce_device() to log device identity before enumeration
announce_device() currently logs the device VID:PID and string descriptors only after successful enumeration. This means that if enumeration fails, no identifying information about the device appears in the kernel log, making it difficult to diagnose failures. Split announce_device() into announce_device_ids(), which logs the VID:PID and bcdDevice immediately after the device descriptor is read, and announce_device_strings(), which logs the product, manufacturer, and serial number strings after successful enumeration. This ensures that a device's identity is always visible in the log regardless of whether enumeration succeeds or fails. Suggested-by: Michal Pecio <michal.pecio@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Nikhil Solanke <nikhilsolanke5@gmail.com> Link: https://patch.msgid.link/20260728195158.65162-3-nikhilsolanke5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Nikhil Solanke
|
152f174a13 |
usb: core: Add quirk for 255-bytes initial config read
Certain third-party USB game controllers exposing (or spoofing) an Xbox
360-compatible interface (VID:PID 045e:028e) fail to enumerate under Linux.
The device disconnects from the bus without responding to the initial
GET_DESCRIPTOR(CONFIGURATION) request, and the kernel logs 'unable to read
config index 0 descriptor/start: -71'.
The device then falls back to a secondary Android HID mode (with a
different VID:PID), losing XInput functionality including rumble support.
The failure reproduces across multiple machines, host controller types, and
kernel versions including current mainline and LTS. The device enumerates
correctly and remains in XInput mode under Windows. Notably, the device
enumerates correctly in Android mode when the same 9-byte request
is issued for that mode's configuration descriptor, confirming the firmware
bug is specific to the XInput mode.
usbmon traces from Linux and Wireshark/USBPcap traces from Windows are
identical up to the point of failure, with no visible protocol-level
difference explaining the divergence. The root cause was identified when
Michal Pecio discovered via a QEMU bus-level capture that Windows does not
use wLength=9 for the initial config descriptor request; it uses
wLength=255. Alan Stern subsequently confirmed this with a bus
analyzer on a different USB 2.0 device, and Michal verified the behavior
goes back to Windows 95 OSR2.1.
So, add a new quirk flag USB_QUIRK_WINDOWS_CONFIG_REQ_SIZE which causes
usb_get_configuration() to issue a 255 byte sized configuration request
instead of USB_DT_CONFIG_SIZE (9) for the initial
GET_DESCRIPTOR(CONFIGURATION) request, mimicking long-standing Windows
behavior.
This patch intentionally does not add any new VID:PID entries using this
quirk. Some affected Xbox 360-compatible controllers spoof Microsoft's
VID:PID, while genuine Microsoft controllers already enumerate correctly
and do not require this quirk. Other affected clone devices use their own
VID:PID pairs and can be added individually as they are identified.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Suggested-by: Michal Pecio <michal.pecio@gmail.com>
Closes: https://lore.kernel.org/linux-usb/CAFgddh+JWdT4LLwMc5qjM8q_pBu-fRo2qADR5ovAKoGHWMQrRw@mail.gmail.com/
Fixes:
|
||
|
Aleksandr Nogikh
|
c2f811314b |
usb: atm: cxacru: properly kill rcv_urb on error in cxacru_cm()
If cxacru_cm() encounters an error while submitting or waiting for snd_urb,
it aborts and returns the error without killing the already submitted
rcv_urb. This leaves the rcv_urb active.
When this happens during initialization (e.g., in cxacru_atm_start()), the
driver may ignore the error and proceed to call cxacru_poll_status(), which
invokes cxacru_cm() again. Attempting to submit the still-active rcv_urb
triggers a warning in usb_submit_urb():
cxacru 1-1:1.0: send of cm 0x84 failed (-104)
ATM dev 0: cxacru_atm_start: CHIP_ADSL_LINE_START returned -104
------------[ cut here ]------------
URB ffff88812658d200 submitted while active
WARNING: drivers/usb/core/urb.c:379 at usb_submit_urb+0x79/0x18b0
drivers/usb/core/urb.c:379
...
Call Trace:
<TASK>
cxacru_cm+0x21a/0xf10 drivers/usb/atm/cxacru.c:631
cxacru_cm_get_array drivers/usb/atm/cxacru.c:722 [inline]
cxacru_poll_status+0x178/0x1110 drivers/usb/atm/cxacru.c:828
cxacru_atm_start+0x185/0x360 drivers/usb/atm/cxacru.c:814
usbatm_atm_init+0x144/0x3a0 drivers/usb/atm/usbatm.c:927
usbatm_usb_probe+0x15cb/0x1db0 drivers/usb/atm/usbatm.c:1178
cxacru_usb_probe+0x17f/0x220 drivers/usb/atm/cxacru.c:1370
...
To fix this, ensure that rcv_urb is properly killed if cxacru_cm() aborts
early. We can safely call usb_kill_urb() on rcv_urb in the error path, as
it is safe to call even if the URB is not active (e.g., if it failed to
submit in the first place, or if it already completed).
Fixes:
|
||
|
Jiangshan Yi
|
7e22c9f79b |
usb: misc: usbio: check ibuf_len against rxbuf_len in bulk msg
ibuf_len is the bulk IN (receive) buffer size, but the EMSGSIZE check
in usbio_bulk_msg() compares it against txbuf_len — the bulk OUT
endpoint size. Both are taken independently from different endpoints
in usbio_probe(), so the check is wrong when they differ.
Use rxbuf_len for the IN direction. This matches the buffer that
actually holds the response data.
Fixes:
|
||
|
Sonali Pradhan
|
6b1c8a9403 |
usb: gadget: f_ncm: Use unsigned int for ndp_index
The variable ndp_index is declared as a signed integer, but it stores
the return value of get_ncm(), which is unsigned.
A malicious host can supply a large offset that overflows the signed
ndp_index, making it negative. Because ndp_index is compared against
unsigned bounds, this negative value bypasses sanity checks and leads
to an out-of-bounds read when calculating the address of the NDP
block (ntb_ptr + ndp_index).
Fix this by changing ndp_index to unsigned int to ensure consistent
unsigned comparisons throughout the function.
Fixes:
|
||
|
Pawel Laszczak
|
50b303f3d0 |
usb: cdnsp: fix incorrect endian conversions for APB timeout register
readl() already returns a CPU-endian value. Passing its return value to
le32_to_cpu() is therefore redundant and causes an incorrect double byte
swap on big-endian systems.
Similarly, writel() expects a CPU-endian value, so passing the result of
cpu_to_le32() is incorrect.
Remove the unnecessary conversions and operate on the MMIO register value
as a CPU-endian u32.
Fixes:
|
||
|
Christophe Leroy (CS GROUP)
|
21d055109b |
powerpc: Move CONFIG_QE_GPIO to SoC
Commit
|
||
|
Greg Kroah-Hartman
|
b6061b6cca |
USB serial fixes for 7.2-rc4
Here are some fixes for 7.2: - fix data loss on keyspan_pda throttle - fix memory corruption with malicious edgeport devices - fix memory corruption with corrupt io_ti firmware - fix OOB read with corrupt mxuport firmware Included are also some new ftdi and modem device ids. All have been in linux-next with no reported issues. -----BEGIN PGP SIGNATURE----- iJEEABYKADkWIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCamNNlhsUgAAAAAAEAA5t YW51MiwyLjUrMS4xMiwyLDIACgkQC8XNwux9ZQgZ/gEAgK5keVsvCTAuDjg9cvyu zBSPRaAEK82JEQNQqvM/8DABAOE+5B4Czqz0sqNefMj88i1MO9hN0+eyp8gkzO8h mcAN =pG38 -----END PGP SIGNATURE----- Merge tag 'usb-serial-7.2-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB serial fixes for 7.2-rc4 Here are some fixes for 7.2: - fix data loss on keyspan_pda throttle - fix memory corruption with malicious edgeport devices - fix memory corruption with corrupt io_ti firmware - fix OOB read with corrupt mxuport firmware Included are also some new ftdi and modem device ids. All have been in linux-next with no reported issues. * tag 'usb-serial-7.2-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: io_edgeport: cap received transmit credits USB: serial: option: add TDTECH MT5710-CN USB: serial: io_ti: reject oversized boot-mode firmware USB: serial: mxuport: validate firmware header size USB: serial: ftdi_sio: add support for E+H FXA291 USB: serial: keyspan_pda: fix data loss on receive throttling |
||
|
Andrei Kuchynski
|
fb0bf289f5 |
usb: typec: ucsi: Correct teardown ordering in ucsi_init() error path
The commit |
||
|
Sunho Park
|
faaddd811c |
USB: serial: io_edgeport: cap received transmit credits
The interrupt-status packet reports transmit credits returned by the
device. edge_interrupt_callback() adds the 16-bit value to txCredits
without checking maxTxCredits.
edge_write() uses txCredits minus the software FIFO count as the amount
of data that fits. Since the FIFO is allocated with maxTxCredits bytes,
txCredits exceeding maxTxCredits can cause OOB write in ring buffer.
Cap accumulated credits at maxTxCredits. Conforming devices should never
hit the cap.
Fixes:
|
||
|
Chukun Pan
|
55645e4f3c |
USB: serial: option: add TDTECH MT5710-CN
Add support for the TDTECH MT5710-CN (5G redcap) module based on the Huawei HiSilicon Balong chip. T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=3466 ProdID=3301 Rev=ff.ff S: Manufacturer=TD Tech Ltd. S: Product=TDTECH MT571X S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr= 0mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0d Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0d Prot=00 Driver=cdc_ncm E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=13 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=12 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=1c Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=14 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Interface: ECM / NCM + DIAG + AT + SERIAL + GPS Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> |
||
|
Pengpeng Hou
|
6fcd91ce2a |
USB: serial: io_ti: reject oversized boot-mode firmware
do_boot_mode() copies the firmware payload, excluding its four-byte prefix,
into a fixed 15.5 KiB staging buffer. check_fw_sanity() already proves that
the image contains its seven-byte header and validates the declared image
length and checksum, but it does not impose this boot-mode destination
limit.
Reject images whose payload does not fit before allocating and filling the
staging buffer.
Fixes:
|
||
|
Pengpeng Hou
|
52beeed5e5 |
USB: serial: mxuport: validate firmware header size
mxuport_probe() reads version bytes at fixed offsets after
request_firmware() succeeds. Firmware loading success does not prove that
the blob reaches the highest version offset.
Reject short firmware images before reading the version bytes. This is
source-level parser hardening; no affected device or crash was observed.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Fixes:
|
||
|
Diego Fernando Mancera Gomez
|
71132cedd1 |
usb: atm: ueagle-atm: reject descriptors that confuse probe and disconnect
uea_probe() distinguishes a pre-firmware device from a post-firmware one
using the USB id (UEA_IS_PREFIRM()), and stores a different object as the
interface data in each case: a 'struct completion' for a pre-firmware
device (to be waited on in .disconnect()), or a 'struct usbatm_data' for a
post-firmware one.
uea_disconnect() instead tells the two apart by the number of interfaces
of the active configuration (a pre-firmware device exposes a single
interface, ADI930 has 2 and eagle has 3), and casts the interface data
accordingly.
Because the two handlers use different criteria, a crafted device that
advertises a pre-firmware id together with a multi-interface descriptor
(or a post-firmware id with a single interface) makes them disagree: the
small 'struct completion' stored by uea_probe() is then passed to
usbatm_usb_disconnect(), which casts it to 'struct usbatm_data' and takes
instance->serialize, reading past the end of the allocation:
BUG: KASAN: slab-out-of-bounds in __mutex_lock+0x152a/0x1b80
Read of size 8 at addr ffff8880470e2c60 by task kworker/1:2/982
...
__mutex_lock+0x152a/0x1b80
usbatm_usb_disconnect+0x70/0x820
uea_disconnect+0x133/0x2c0
usb_unbind_interface+0x1dd/0x9e0
...
which belongs to the cache kmalloc-96 of size 96
The buggy address is located 0 bytes to the right of
allocated 96-byte region [ffff8880470e2c00, ffff8880470e2c60)
Reject such inconsistent descriptors in uea_probe() so that both handlers
always make the same pre/post-firmware decision.
Reported-by: syzbot+e62a973f8322b3bbe3ac@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e62a973f8322b3bbe3ac
Fixes:
|
||
|
Chia-Lin Kao (AceLan)
|
8706409bd4 |
usb: typec: ucsi: yoga_c630: Remove redundant duplicate altmode handling
This reverts commit |
||
|
Chia-Lin Kao (AceLan)
|
f1aa17f72f |
usb: typec: ucsi: Add duplicate detection to nvidia registration path
Extend the duplicate altmode detection to ucsi_register_altmodes_nvidia()
which is used when a driver provides the update_altmodes() callback.
This ensures all drivers benefit from duplicate detection, whether they
use the standard registration path or the nvidia path with update_altmodes
callback.
Without this fix, drivers using the nvidia path (like yoga_c630) would
still encounter duplicate altmode registration errors from buggy firmware.
Fixes:
|
||
|
Chia-Lin Kao (AceLan)
|
67c92c6419 |
usb: typec: ucsi: Detect and skip duplicate altmodes from buggy firmware
Some firmware implementations incorrectly return the same altmode
multiple times at different offsets when queried via
UCSI_GET_ALTERNATE_MODES. This causes sysfs duplicate filename errors
and kernel call traces when the driver attempts to register the same
altmode twice:
sysfs: cannot create duplicate filename '/devices/.../typec/port0/port0.0/partner'
typec-thunderbolt port0-partner.1: failed to create symlinks
typec-thunderbolt port0-partner.1: probe with driver typec-thunderbolt failed with error -17
The matching rules differ by recipient:
- UCSI_RECIPIENT_CON (port) and UCSI_RECIPIENT_SOP_P (plug):
Two altmodes with identical SVID and VDO are byte-for-byte
duplicates and the second has no observable function, so drop it.
- UCSI_RECIPIENT_SOP (partner):
The typec class binds each partner altmode to a port altmode of
the same SVID via altmode_match()/device_find_child(), which
returns the first port altmode with a matching SVID. If the
partner advertises more altmodes for SVID X than the port
advertises, the surplus partner altmode(s) collapse onto an
already-paired port altmode and trigger the
"duplicate filename .../partner" sysfs error during
typec_altmode_create_links(). Use the port-side altmode count for
SVID X as the authoritative cap and reject any partner altmode
that would exceed it. This preserves legitimate multi-Mode
partner altmodes (vendor SVIDs that the port really does
advertise more than once) while filtering the firmware-generated
duplicates that have no port counterpart, and is therefore
stricter than a plain SVID+VDO comparison (which still admits the
Thunderbolt case where firmware reports the same SVID twice with
different VDOs) without being over-broad like a plain SVID match
(which would falsely drop legitimate vendor multi-Mode entries).
If a duplicate is detected, skip it and emit a clean warning instead
of generating a kernel call trace:
ucsi_acpi USBC000:00: con2: Firmware bug: duplicate partner altmode SVID 0x8087 at offset 1, ignoring.
ucsi_acpi USBC000:00: con2: VDO mismatch: 0x8087a043 vs 0x00000001
The duplicate detection logic lives in a reusable helper
ucsi_altmode_is_duplicate() and is invoked from
ucsi_register_altmodes(). It applies to all three recipient types:
partner (SOP), port (CON), and plug (SOP_P) altmodes.
Fixes:
|
||
|
Jinchao Wang
|
d5e5cd3654 |
usb: gadget: dummy_hcd: prevent fifo_req reuse during giveback
dummy_hcd embeds a single shared usb_request (dum->fifo_req) that the
"emulated single-request FIFO" fast-path in dummy_queue() reuses for
small IN transfers: it copies the caller's request into it
(req->req = *_req) and queues it, treating list_empty(&fifo_req.queue)
as "the slot is free".
The completion side (dummy_timer/transfer/nuke/dummy_dequeue) follows
the standard pattern: list_del_init(&req->queue) unlinks the request,
then the lock is dropped and usb_gadget_giveback_request() invokes
req->complete(). But list_del_init() makes fifo_req.queue look empty
*before* the completion callback returns, so a concurrent dummy_queue()
on another CPU sees the slot as free, reuses fifo_req and runs
req->req = *_req -- overwriting req->complete while dummy_timer is
mid-calling it. The indirect call then jumps to a clobbered pointer,
causing a general protection fault / page fault in dummy_timer
(syzkaller extid faf3a6cf579fc65591ca). The clobbering write is an
in-bounds memcpy on a live shared object, so KASAN cannot flag it.
Add a fifo_req_busy bit covering the shared request's whole lifetime:
set it in dummy_queue() when the FIFO fast-path takes fifo_req (making
it the fast-path guard, replacing the list_empty(&fifo_req.queue)
test), and clear it after the completion callback has returned, via a
dummy_giveback() helper used at all four gadget-request giveback
sites. The shared slot can no longer be reused until its completion
callback has finished.
Reported-by: syzbot+faf3a6cf579fc65591ca@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=faf3a6cf579fc65591ca
Fixes:
|
||
|
Xu Yang
|
fc3afb5728 |
usb: chipidea: fix usage_count leak when autosuspend_delay is negative
The probe() calls pm_runtime_use_autosuspend(), but remove() does not call
pm_runtime_dont_use_autosuspend(). This can lead to a usage_count leak if
autosuspend_delay is set to a negative value.
The pm_runtime_use_autosuspend() also notes that it's important to undo
this with pm_runtime_dont_use_autosuspend() at driver exit time.
Fixes:
|
||
|
Griffin Kroah-Hartman
|
4e0197fbb0 |
usb: core: sysfs: add lock to bos_descriptors_read()
Add a lock to the function bos_descriptors_read(). This function accesses udev->bos, which could be simultaneously freed in usb_reset_and_verify_device(), a function that is commonly called in drivers all over the kernel. Assisted-by: gkh_clanker_t1000 Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Link: https://patch.msgid.link/20260715-usb_core_patches_3-v1-1-53021f5576fd@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Guangshuo Li
|
c947360ae6 |
usb: musb: omap2430: Do not put borrowed of_node in probe
omap2430_probe() stores pdev->dev.of_node in a local np variable. This is
a borrowed pointer and the probe function does not take a reference to
it.
The success and error paths nevertheless call of_node_put(np). This drops
a reference that is owned by the platform device, and can leave
pdev->dev.of_node with an unbalanced reference count.
Do not put the borrowed platform device node from omap2430_probe().
References taken for the child MUSB device are handled by the device core,
and the ctrl-module phandle reference is still released separately.
Fixes:
|
||
|
Chia-Lin Kao (AceLan)
|
e0b291fe11 |
usb: core: port: Deattach Type-C connector on component unbind
connector_unbind() is the mirror of connector_bind(), but it is missing
the symmetric call to typec_deattach() that connector_bind() makes via:
if (port_dev->child)
typec_attach(port_dev->connector, &port_dev->child->dev);
When a Thunderbolt dock is unplugged, two teardown paths race:
1. The component framework calls connector_unbind() first, which sets
port_dev->connector = NULL without calling typec_deattach(). This
leaves port->usb2_dev/port->usb3_dev in struct typec_port pointing at
the USB device that is about to be freed.
2. usb_disconnect() then calls typec_deattach(port_dev->connector, ...),
but port_dev->connector is already NULL, so the call is a no-op and
port->usb2_dev is never cleared.
3. Concurrently, UCSI detects a PD partner-disconnect event and calls
typec_unregister_partner(), which reads port->usb2_dev (now a dangling
pointer to freed memory) and passes it to typec_partner_unlink_device()
-> sysfs_remove_link() -> dev_name() on the freed device, corrupting
the typec/UCSI partner state.
This corruption leaves the Thunderbolt tunnel in an inconsistent state on
the next dock hot-plug. On affected hardware the dock's I225/igc NIC fails
to enumerate: AER fires a slot reset while the igc driver is still
initialising ("PCIe link lost"), and the subsequent igc_reset attempt hits
igc_rd32 on an already-detached device:
igc 0000:2e:00.0 eth0: PCIe link lost, device now detached
igc: Failed to read reg 0x0!
WARNING: CPU: 9 PID: 129 at drivers/net/ethernet/intel/igc/igc_main.c:7005
igc_rd32+0xa4/0xc0 [igc]
Call Trace:
igc_disable_pcie_master+0x16/0xa0 [igc]
igc_reset_hw_base+0x14/0x170 [igc]
igc_reset+0x63/0x110 [igc]
igc_io_slot_reset+0x9e/0xd0 [igc]
report_slot_reset+0x5d/0xc0
pcie_do_recovery+0x209/0x400
aer_isr_one_error_type+0x235/0x430
aer_isr+0x4e/0x80
irq_thread+0xf4/0x1f0
4. UCSI later handles the PD partner-disconnect and calls
typec_unregister_partner(), which still sees the stale port->usb2_dev
and tries to remove its sysfs link a second time:
kernfs: can not remove 'typec', no directory
WARNING: CPU: 6 PID: 55 at fs/kernfs/dir.c:1706 kernfs_remove_by_name_ns+0xe9/0xf0
Workqueue: events ucsi_handle_connector_change [typec_ucsi]
Call Trace:
sysfs_remove_link+0x19/0x50
typec_unregister_partner+0x6e/0x120 [typec]
ucsi_unregister_partner+0x107/0x150 [typec_ucsi]
ucsi_handle_connector_change+0x3ec/0x490 [typec_ucsi]
process_one_work+0x18e/0x3e0
worker_thread+0x2e3/0x420
kthread+0x10a/0x230
ret_from_fork+0x121/0x140
ret_from_fork_asm+0x1a/0x30
With worse timing the same stale pointer is dereferenced after the
backing memory is freed, turning the warning into a use-after-free.
Fix the asymmetry: call typec_deattach() before clearing
port_dev->connector, matching what connector_bind() does on the bind side.
typec_partner_deattach() is already protected by port->partner_link_lock,
so it serialises safely with the concurrent typec_unregister_partner() path.
Fixes:
|
||
|
Huang Wei
|
3b4ca2e01c |
USB: storage: add NO_ATA_1X quirk for Longmai USB Key
The Longmai Technologies USB Key (0x04b4:0xb708) advertises itself as a SCSI/Bulk-only mass storage device but does not correctly handle ATA pass-through commands. When such a command (ATA_12 or ATA_16) is sent to the device it fails to respond and the transfer eventually times out, leaving the device unusable. Add an unusual_devs entry for this device that sets the US_FL_NO_ATA_1X flag, so usb-storage short-circuits ATA pass-through commands and returns INVALID COMMAND OPERATION CODE (0x20 0x05 0x24 0x00) instead of forwarding them to the device. Information about the device in /sys/kernel/debug/usb/devices: T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 12 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=06 Prot=50 MxPS=64 #Cfgs= 1 P: Vendor=04b4 ProdID=b708 Rev= 1.00 S: Manufacturer=Longmai Technologies S: Product=USB Key C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Reported-by: Ai Chao <aichao@kylinos.cn> Cc: stable <stable@kernel.org> Signed-off-by: Huang Wei <huangwei@kylinos.cn> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://patch.msgid.link/20260716033341.2830872-1-huangwei@kylinos.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Tim Pambor
|
fad0fd120e |
USB: serial: ftdi_sio: add support for E+H FXA291
The Commubox FXA291 by Endress+Hauser AG is a USB serial converter based on FT232B which is used to communicate with field devices. It enumerates using the FTDI vendor ID and a custom PID. usb 1-9: New USB device found, idVendor=0403, idProduct=e510, bcdDevice= 4.00 usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-9: Product: FXA291 usb 1-9: Manufacturer: Endress+Hauser usb 1-9: SerialNumber: 00000000 ftdi_sio 1-9:1.0: FTDI USB Serial Device converter detected usb 1-9: Detected FT232B usb 1-9: FTDI USB Serial Device converter now attached to ttyUSB0 Signed-off-by: Tim Pambor <timpambor@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> |
||
|
Johan Hovold
|
42a97c0480 |
USB: serial: keyspan_pda: fix data loss on receive throttling
Killing the interrupt-in urb when the line disciple requests throttling
may lead to data loss if an ongoing transfer is cancelled.
Instead set a flag to prevent the completion handler from resubmitting
the urb until the port is unthrottled.
Fixes:
|
||
|
Melbin K Mathew
|
c2e819be6a |
usb: gadget: printer: fix infinite loop in printer_read()
printer_read() uses the same variable for the requested copy size and
the number of bytes actually copied to user space. copy_to_user()
returns the number of bytes not copied, so when it fails to copy
anything, the computed copied length becomes zero.
In that case len, buf, current_rx_bytes and current_rx_buf are left
unchanged. If RX data is available and the user buffer remains
unwritable, the read loop can repeat indefinitely.
Track the copied length separately and return -EFAULT, or the number of
bytes already copied, if an iteration makes no progress.
Fixes:
|
||
|
Fan Wu
|
5650c18d93 |
usb: gadget: f_midi: cancel pending IN work before freeing the midi object
The f_midi driver embeds a work item (midi->work) whose handler,
f_midi_in_work(), dereferences the enclosing struct f_midi through
container_of(). This work is armed from two sites: f_midi_complete(),
on a normal IN-endpoint completion, and f_midi_in_trigger(), on an ALSA
rawmidi output-stream start.
Neither f_midi_disable() nor f_midi_unbind() cancels midi->work.
f_midi_disable() only disables the endpoints and drains the in_req_fifo;
it does not synchronize the work item, and the sound card is released
asynchronously to the final free of the midi object.
The midi object is reference-counted (midi->free_ref) and is freed in
f_midi_free() only once both the usb_function reference and the rawmidi
private_data reference have been dropped. In f_midi_unbind(),
f_midi_disable() runs before the sound card is released, so while the
USB endpoints are already disabled the rawmidi device is still usable by
an open substream. A concurrent userspace write on such a substream can
reach f_midi_in_trigger() and queue midi->work again after
f_midi_disable() has returned. A work item armed this way may still be
pending when the last reference drops and f_midi_free() proceeds to
kfree(midi), letting f_midi_in_work() dereference the struct after it
has been freed, a use-after-free.
For this reason cancelling midi->work in f_midi_disable() would not be
sufficient: the ALSA trigger path can rearm the work after disable()
returns. Cancelling at the refcount-zero free site is the boundary
after which neither arming source can survive, because by then both
references that keep the midi object alive have been dropped: the USB
endpoints are already disabled and the rawmidi device has been released.
Fix this by calling cancel_work_sync(&midi->work) in the refcount-zero
block of f_midi_free(), before the embedded work_struct is freed along
with the rest of the structure. opts->lock is a sleeping mutex, so
calling cancel_work_sync() under it is permitted, and the handler takes
midi->transmit_lock rather than opts->lock, so no self-deadlock can
occur while it waits for a running instance of the work to finish.
This issue was found by an in-house static analysis tool.
Fixes:
|
||
|
Fan Wu
|
0583f2fbf8 |
usb: gadget: udc: bdc: free IRQ and drain func_wake_notify before teardown
The Broadcom BDC UDC driver registers its IRQ handler with
devm_request_irq() in bdc_udc_init(), so the IRQ is released by devm
only after bdc_remove() returns. devm releases resources in reverse
LIFO order, but bdc_remove() runs bdc_udc_exit() and bdc_hw_exit() ->
bdc_mem_free() manually before returning: bdc_udc_exit() tears down
individual endpoint objects via bdc_free_ep(), while bdc_hw_exit() ->
bdc_mem_free() frees and NULLs the DMA-coherent status-report ring
(bdc->srr.sr_bds) and kfree()s bdc->bdc_ep_array. Both happen while
the IRQ handler (bdc_udc_interrupt, requested with IRQF_SHARED)
remains deliverable in the window up to the post-remove devm
free_irq().
On receipt of a shared interrupt in that window, bdc_udc_interrupt()
dereferences bdc->srr.sr_bds[bdc->srr.dqp_index] (NULL or freed DMA)
and dispatches sr_handler callbacks that index into bdc_ep_array,
causing a NULL-deref or use-after-free.
The same window affects the delayed_work bdc->func_wake_notify, which is
armed from the IRQ handler via bdc_sr_uspc() -> handle_link_state_change()
-> schedule_delayed_work() and may self-rearm from its own callback
bdc_func_wake_timer(). No cancel exists anywhere in the driver, so a
queued work item that fires after bdc_remove() returns and the bdc
structure is devm-freed dereferences freed memory.
Replace devm_request_irq() with request_irq() and add an explicit
free_irq(bdc->irq, bdc) in bdc_remove(). Clear BDC_GIE before
free_irq() to stop the device from asserting interrupts, then
free_irq() drains any in-flight handler, then cancel_delayed_work_sync()
drains the func_wake_notify delayed work. This ordering ensures the
IRQ handler and delayed work cannot interfere with the subsequent
endpoint and DMA teardown in bdc_udc_exit() and bdc_hw_exit(). Wire the
matching free_irq() into the bdc_udc_init() error path so the IRQ is
released on probe failure, and route the bdc_init_ep() failure through
err0 instead of returning directly.
This issue was found by an in-house static analysis tool.
Fixes:
|
||
|
Andrei Kuchynski
|
7aa7d4bf9d |
usb: typec: ucsi: Fix race condition and ordering in port unregistration
A synchronization issue exists during port unregistration where pending
partner work items can race against workqueue destruction, leading to
use-after-free conditions:
cros_ec_ucsi cros_ec_ucsi.3.auto: error -ETIMEDOUT: PPM init failed
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:__queue_work+0x83/0x4a0
Call Trace:
<IRQ>
__cfi_delayed_work_timer_fn+0x10/0x10
run_timer_softirq+0x3b6/0xbd0
sched_clock_cpu+0xc/0x110
irq_exit_rcu+0x18d/0x330
fred_sysvec_apic_timer_interrupt+0x5e/0x80
Fix this by ensuring strict ordering and proper serialization during
teardown:
1. Move ucsi_unregister_partner() to the beginning of the teardown
sequence and protect it under the connector mutex lock.
2. Ensure all pending partner tasks are explicitly flushed and finished
before the workqueue is destroyed.
3. Switch from mod_delayed_work() to a cancel_delayed_work() and
queue_delayed_work() sequence. This guarantees that items currently marked
as pending won't be scheduled an additional time, preventing a double
release of resources which leads to the following crash:
Oops: general protection fault, probably for non-canonical address
0xdead000000000122: 0000 [#1] SMP NOPTI
Workqueue: cros_ec_ucsi.3.auto-con2 ucsi_poll_worker
RIP: 0010:ucsi_poll_worker+0x65/0x1e0
Call Trace:
<TASK>
process_scheduled_works+0x218/0x6d0
worker_thread+0x188/0x3f0
__cfi_worker_thread+0x10/0x10
kthread+0x226/0x2a0
To ensure these rules are applied identically across both the normal
teardown and the ucsi_init() error paths, consolidate the cleanup logic
into a new helper, ucsi_unregister_port().
Cc: stable <stable@kernel.org>
Fixes:
|
||
|
Sonali Pradhan
|
1febec7e47 |
usb: gadget: f_ncm: validate datagram bounds in ncm_unwrap_ntb()
When unpacking host-supplied NTBs, ncm_unwrap_ntb() checks datagram length against frame_max but does not verify that the datagram fits within the declared block length. Additionally, when decoding multiple NTBs from a single socket buffer, subsequent block lengths are not checked against the actual remaining buffer data. With these checks missing, a malicious USB host can specify datagram offsets and lengths that point beyond the block, or supply secondary NTB headers declaring lengths larger than the buffer. skb_put_data() then copies adjacent kernel memory from skb_shared_info into the network skb. Fix this by verifying that sufficient buffer space remains for the NTB header before parsing, handling zero-length block declarations, ensuring that block lengths never exceed the remaining buffer space, and verifying that each datagram payload stays strictly within the block boundary. Fixes: |
||
|
Johan Hovold
|
f05847a216 |
USB: gadget: fsl-udc: drop misleading unbind sanity check
The UDC pointer is set on successful probe and will never be NULL when the driver is later unbound so drop the misleading sanity check (and confused error message). Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://patch.msgid.link/20260702141536.90887-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Johan Hovold
|
c4dd150fce |
USB: gadget: fsl-udc: fix dev_printk() device
A change replacing custom printk() macros with dev_printk() incorrectly
used the gadget struct device instead of the controller struct device
(including for messages printed before the gadget device name has been
initialised).
Switch to using the controller platform device with dev_printk() so that
the controller device and driver names are included in log messages as
expected.
Fixes:
|
||
|
Johan Hovold
|
29a142d3e8 |
USB: gadget: snps-udc: fix device name leak on probe failure
The gadget device name is set by UDC core when registering the gadget
and must not be set before to avoid leaking the name in intermediate
error paths (e.g. when detecting an older chip revision).
Fixes:
|
||
|
Johan Hovold
|
6b874d00c4 |
USB: gadget: fsl-udc: fix device name leak on probe failure
The gadget device name is set by UDC core when registering the gadget
and must not be set before to avoid leaking the name in intermediate
error paths (e.g. on dma pool creation failure).
Fixes:
|
||
|
Xincheng Zhang
|
1fc50f1ecd |
usb: xhci-pci: Limit VIA VL805 DMA addressing to 36 bits
The VIA VL805/806 xHCI controller advertises AC64, but fails to handle DMA addresses at or above 0x1000000000. On systems with large amounts of RAM, this can cause USB device failures when the controller is given DMA addresses beyond its usable address width. Do not use XHCI_NO_64BIT_SUPPORT for this controller. That quirk clears the cached AC64 capability and limits DMA to 32 bits, causing unnecessary bouncing for addresses between 4GiB and 64GiB and hiding the controller's real AC64 capability from code that may need to distinguish register access width from usable DMA address width. Track the usable DMA address width separately from the AC64 capability. Initialize the generic xhci->dma_mask_bits field to 64 and let PCI quirks reduce it for controllers with narrower DMA support. Set VIA VL805/806 to 36 bits so the DMA API only hands it addresses in the range it can handle while keeping HCCPARAMS1.AC64 visible. Cc: stable <stable@kernel.org> Signed-off-by: Xincheng Zhang <zhangxincheng@ultrarisc.com> Link: https://patch.msgid.link/20260630-xhci-via-dma-fix-v3-1-690dcb8cf75a@ultrarisc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Muhammad Bilal
|
b70dc75e85 |
usb: gadget: uvc: clamp SEND_RESPONSE length to the response buffer
uvc_send_response() builds the UVC control response from a user-supplied
struct uvc_request_data:
req->length = min_t(unsigned int, uvc->event_length, data->length);
...
memcpy(req->buf, data->data, req->length);
req->length is clamped to uvc->event_length, which is taken from the
host control request wLength (up to UVC_MAX_REQUEST_SIZE, 64), and to
data->length, which comes from the UVCIOC_SEND_RESPONSE ioctl and is
only checked for being negative. The source buffer data->data is only
60 bytes, so a response with uvc->event_length and data->length both
greater than 60 makes memcpy() read past the end of data->data.
Clamp req->length to sizeof(data->data) as well.
Fixes:
|
||
|
Cen Zhang
|
79e2d75725 |
usb: gadget: f_tcm: synchronize delayed set_alt with teardown
The f_tcm set_alt() path defers endpoint setup to a work item and
completes the delayed status response from process context. The delayed
work uses f_tcm private state and may complete the setup request after
disconnect or function teardown has already moved on.
Cancel and drain the delayed set_alt work when the function is unbound or
freed. For disable paths, which are reached under the composite device
lock, use a small state machine and a non-sleeping cancellation path
instead of cancel_work_sync(). If the work is already running, mark it
cancelled and let the worker own the cleanup; otherwise tcm_disable() can
cancel the queued work and clean up immediately.
Also serialize the final delayed-status completion with the cancellation
check while holding the composite device lock. This prevents a disconnect
from clearing delayed_status while the worker is about to complete the
control request.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in tcm_delayed_set_alt+0x6c/0xef0
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
? tcm_delayed_set_alt+0x6c/0xef0
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x188/0x320
? tcm_delayed_set_alt+0x6c/0xef0
kasan_report+0xe0/0x110
? tcm_delayed_set_alt+0x6c/0xef0
tcm_delayed_set_alt+0x6c/0xef0
? __pfx_tcm_delayed_set_alt+0x10/0x10
? process_one_work+0x4cb/0xb90
? rcu_is_watching+0x20/0x50
? tcm_delayed_set_alt+0x9/0xef0
process_one_work+0x4d7/0xb90
? __pfx_process_one_work+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __list_add_valid_or_report+0x37/0xf0
? __pfx_tcm_delayed_set_alt+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
worker_thread+0x2d8/0x570
? __pfx_worker_thread+0x10/0x10
kthread+0x1ad/0x1f0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3c9/0x540
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x2e9/0x730
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 544:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
tcm_alloc+0x68/0x180
usb_get_function+0x36/0x60
config_usb_cfg_link+0x125/0x1b0
configfs_symlink+0x322/0x890
vfs_symlink+0xc2/0x270
filename_symlinkat+0x295/0x2f0
__x64_sys_symlinkat+0x62/0x90
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 661:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x43/0x70
kfree+0x2f9/0x530
config_usb_cfg_unlink+0x173/0x1e0
configfs_unlink+0x1fa/0x340
vfs_unlink+0x15c/0x510
filename_unlinkat+0x2ba/0x450
__x64_sys_unlinkat+0x63/0x90
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes:
|
||
|
Arnd Bergmann
|
50246d5723 |
usb: udc: pxa: fix error handling
As Dan Carpenter points out, my recent change makes subtle
changes to the error handling that were not intended.
Move the warning print up so it does not get skipped in
case of an error, but handle -EPROBE_DEFER properly now.
Change the devm_gpiod_get() to the _optional variant, which
is in line with the intended behavior and the DT binding,
though this did not work previously.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/linux-usb/ag6-xhfFjb5NpXQz@stanley.mountain/
Fixes:
|
||
|
Linus Torvalds
|
534f8f051e |
USB fixes for 7.2-rc3
Here are a number of small USB driver fixes for many reported issues. Included in here are: - usb serial driver corruption and use-after-free fixes - usb gadget rndis bugfixes for malicious/buggy host connections - typec driver fixes for a load of different tiny reported issues - typec mux driver revert for a broken patch in -rc1 - usb gadget driver fixes for many different reported problems - new usb device quirks added - usbip tool fixes and some core usbip fixes as well - dwc3 driver fixes for minor issues - xhci driver fixes for reported problems - lots of other tiny usb driver fixes for many tiny issues All of these have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCalNSkw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynUlACgtUhZOR/MsYMcNbKJe9vk0iG35+AAnjrhznd4 OJqmb+1vVQ7xDm2fq+gz =Ky4T -----END PGP SIGNATURE----- Merge tag 'usb-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes for many reported issues. Included in here are: - usb serial driver corruption and use-after-free fixes - usb gadget rndis bugfixes for malicious/buggy host connections - typec driver fixes for a load of different tiny reported issues - typec mux driver revert for a broken patch in -rc1 - usb gadget driver fixes for many different reported problems - new usb device quirks added - usbip tool fixes and some core usbip fixes as well - dwc3 driver fixes for minor issues - xhci driver fixes for reported problems - lots of other tiny usb driver fixes for many tiny issues All of these have been in linux-next with no reported issues" * tag 'usb-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (56 commits) USB: core: ratelimit cabling message usb: misc: usbio: fix disconnect UAF in client teardown Revert "usb: typec: mux: avoid duplicated mux switches" USB: chaoskey: Fix slab-use-after-free in chaoskey_release() usb: ucsi: huawei_gaokun: move typec_altmode off stack usb: typec: tcpci_rt1711h: unregister TCPCI port with devres usb: typec: tcpm: Fix VDM type for Enter Mode commands usb: typec: ucsi: cancel pending work on system suspend usb: typec: class: drop PD lookup reference usb: typec: ps883x: Fix DP+USB3 configuration usb: xhci: Fix sleep in atomic context in xhci_free_streams() xhci: sideband: fix ring sg table pages leak usb: gadget: udc: Fix use-after-free in gadget_match_driver usb: dwc3: run gadget disconnect from sleepable suspend context usb: sl811-hcd: disable controller wakeup on remove usb: typec: anx7411: use devm_pm_runtime_enable() usb: dwc3: fix dwc3_readl() and dwc3_writel() calls in dwc3_ulpi_setup() USB: misc: uss720: unregister parport on probe failure usb: gadget: function: rndis: add length check for header usb: gadget: function: rndis: add length check to response query ... |