Instead of relying on info->par being a pointer to an LCDC channel, cast
the notifier block pointer to an sh_hdmi pointer.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Pass a pointer to a struct sh_mobile_lcdc_priv instead, which stores a
pointer to the device.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The pm_runtime_enable() and pm_runtime_resume() calls don't belong to
sh_mobile_lcdc_setup_clocks(). Move them to the probe function. Remove
the unneeded pm_runtime_resume() call.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
default_720p and sh_mobile_lcdc_check_interface are used at device
initialization time only. Mark them as __devinitconst and __devinit
respectively.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Make the driver more readable by reordering code and splitting it into
logical sections. Reorder the headers alphabetically.
No modification to the code have been performed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
uvesafb_open may failed to save hardware state when kmalloc failed
in uvesafb_vbe_state_save, we should check this and notice user.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Return a negative errno instead of zero in the write function of
the sysfs entry in case of error.
Also add a check on the return value of dlfb_setup_modes().
Signed-off-by: Olivier Sobrie <olivier@sobrie.be>
Acked-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
This patch adds s3c_fb_driverdata s3c_fb_data_exynos5 for EXYNOS5
and adds extended timing control setting.
EXYNOS5 FIMD needs extended setting for video timing control.
Additional bits are added to VIDTCON2, VIDWxxADD2, VIDOSDxA and
VIDOSDxB registers in order to set timing value for lager resolution.
Also, address offset of VIDTCONx registers is changed from 0x0
to 0x20000, thus variable type should be changed to int type
to handle the address offset of VIDTCONx registers for EXYNOS5 FIMD.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Otherwise we hit WARN_CONSOLE_UNLOCKED in do_unblank_screen
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)
iQEcBAABAgAGBQJPUrf8AAoJEDeqqVYsXL0Ma0cH/1hcV4G3U7ZNbKJsijl7eowP
GON1pme9XvUIHxWibIEZhUaaycWhN3oaShdEO+IAYSVoRSC6pu1H+/Be8VgvVpdT
+1N9a41sXmuMeTadwfdZJ6k0Gs9gtbuxfvO4Z6WRbrpjik5S/3ZP3A/US8jESbCW
rOK9evTUCs+rBFXiyOwyz3Li335/zEbq3E3N14VgbA05vYvw3+AuNQ0e8zS2A9/D
3yLiQfIPhVZmH5majf+4qqyvBqQ0Jacj5TZrKyRehYZpB1c+fHwTDRYBko9vWdEH
Tojk/mz3hPu48BNJyawb0Kemei+hNGKyejj8jbjBT1cb8/FTOGeZsYRa83YA6Hg=
=joKr
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
SCSI fixes from James Bottomley:
"There's just a single fix in here: the osd max device number fix."
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
[SCSI] osd_uld: Bump MAX_OSD_DEVICES from 64 to 1,048,576
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)
iQEcBAABAgAGBQJPUqnkAAoJEDeqqVYsXL0MyTwH/14R9sIt+IdQgMGje6Dys6U1
3wxmNHcxNBB461212i+XVToH72GiPtUyWY8Q3LT+Qcq4Rab9oq8wDffxdgflDLja
sZq9COLR8dmXJM0hduyuysCiNIlmuURV20uIMsDbYutBVtAKKqMd7ZrJBmkVh7xT
slBJf+0lcD5IBYPYwf8lbxAI7E/C5TarMCIZk4z21I8ovF321RlGcyyo6NM62q/P
wvLw4bJuW7nJa3q3B7BznzBcoHLmzo9tiY+CbtQlGhSdasDKJ8HuAegTVyofl6s8
0/RTvaUcqTWUlFxXzLVDT+MCWAUP4GFR66tR2T5tygRi9st70TcpMzISiyZzKi8=
=WzAJ
-----END PGP SIGNATURE-----
Merge tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6
PARISC fixes from James Bottomley:
"This is a set of build fixes to get the cross compiled architecture
testbeds building again"
* tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6:
[PARISC] don't unconditionally override CROSS_COMPILE for 64 bit.
[PARISC] include <linux/prefetch.h> in drivers/parisc/iommu-helpers.h
[PARISC] fix compile break caused by iomap: make IOPORT/PCI mapping functions conditional
Some user scenarios need to prioritize performance over
maxiumum resolution.
Also, some devices may have bad vendor descriptors, and
this allows the user to set a pixel limit that matches
their specific device to avoid blank screens on higher
resolution monitors.
700000 minimum for DL-115, 2360000 maximum for DL-195
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Bernie Thompson <bernie@plugable.com>
The driver was not using le16_to_cpu when reading keys from the vendor
descriptor, causing incorrect parsing. Mainly, sku_pixel_limit was not
being parsed on big-endian systems. This would result in a blank screen
on big-endian CPUs where the DL chips's max mode was smaller than the
monitor's native mode.
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Bernie Thompson <bernie@plugable.com>
Pull from Herbert Xu:
"This push fixes a bug in mv_cesa that causes all hash operations
that supply data on a final operation to fail."
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: mv_cesa - fix final callback not ignoring input data
15d1ad0 hwmon: (f75375s) Catch some attempts to write to r/o registers
b17d656 hwmon: (f75375s) Properly map the F75387 automatic modes to pwm_enable
edeea10 hwmon: (f75375s) Make pwm*_mode writable for the F75387
331255d hwmon: (f75375s) Fix writes to the pwm* attribute for the F75387
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=e4hU
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
hhwmon fixes for 3.3-rc6 from Guenter Roeck:
These patches are necessary for correct operation and management of
F75387.
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (f75375s) Catch some attempts to write to r/o registers
hwmon: (f75375s) Properly map the F75387 automatic modes to pwm_enable
hwmon: (f75375s) Make pwm*_mode writable for the F75387
hwmon: (f75375s) Fix writes to the pwm* attribute for the F75387
It includes:
- two fixes for OMAP HDMI
- one fix to make new OMAP functions behave as they are supposed to
- one Kconfig dependency fix
- two fixes for viafb for modesetting on VX900 hardware
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.12 (GNU/Linux)
iQIcBAABAgAGBQJPUTAuAAoJECSVL5KnPj1PwIoP/3BosrH3mE7hDAXLI6EoXTmo
SaePt271FV+RqlG5Tjd07IDceXaCz3zf+ZyS9sKZXvGi9QNMKKs52Ah0PeWDfalM
MJVtRh2FBvaSKFvSqKjN3Fzv+bHpJZwekQBLDaHYHNdtQjWNW8Nnkth6n9xNDwau
Xp5owI/p9ZECoCcj/D17LF59t8kiynqKdDOmhzZ1bp/c1LgL4waSXnP5/ToQxmcL
zjUrvR4u3RNDqTxJmScswyDZq4u8qLx4fovhScoPe1OpU2cVXV69UdivzoF4A30c
t02ZPEE+NM5tFfPMtUNn3zCEN+I893e4ABHoZlDfzS8Ab7JJjnDFduvUzJdSPa8H
3kMZH7YmQhs1KhbrEcZPeBuxmZaNXpojRYmlbnw7w+kHtcaxVUxhR87TI8kYZIaS
oqsTXmO+f9T8cMy3WbhUylj+uUpcBQYbIHd4QUhGFvylU24mrrJJQtwsPTFTElE7
CBKPavbtFMkQepeXRX0Sig/xwVcKA7UUfdvirsD4BjfxZqsOxWeBCQN/scEDcSwo
KOsLN4Kc4T3On3vNHc2fdq4f+sd2rlGeB9tH/NRtt7UBjGhxK+9lD5YmiavUopyH
ectsoEMXg9FMQS1GwmQZwQx7r1QXRylBRgrHV/l1XwBU/QfQp3WFqBrVTFZkw4rg
9U0wHlmQYnnU66rUChUt
=+UnE
-----END PGP SIGNATURE-----
Merge tag 'fbdev-fixes-for-3.3-2' of git://github.com/schandinat/linux-2.6
fbdev fixes for 3.3 from Florian Tobias Schandinat
It includes:
- two fixes for OMAP HDMI
- one fix to make new OMAP functions behave as they are supposed to
- one Kconfig dependency fix
- two fixes for viafb for modesetting on VX900 hardware
* tag 'fbdev-fixes-for-3.3-2' of git://github.com/schandinat/linux-2.6:
OMAPDSS: APPLY: make ovl_enable/disable synchronous
OMAPDSS: panel-dvi: Add Kconfig dependency on I2C
viafb: fix IGA1 modesetting on VX900
viafb: select HW scaling on VX900 for IGA2
OMAPDSS: HDMI: hot plug detect fix
OMAPDSS: HACK: Ensure DSS clock domain gets out of idle when HDMI is enabled
It makes no sense to attempt to manually configure the fan in auto mode,
or set the duty cycle directly in closed loop mode. The corresponding
registers are then read-only. If the user tries it nonetheless, error out
with EINVAL instead of silently doing nothing.
Signed-off-by: Nikolaus Schulz <mail@microschulz.de>
[guenter.roeck@ericsson.com: Minor formatting cleanup]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
The F75387 supports automatic fan control using either PWM duty cycle or
RPM speed values. Make the driver detect the latter mode, and expose the
different modes in sysfs as per pwm_enable, so that the user can switch
between them.
The interpretation of the pwm_enable attribute for the F75387 is adjusted
to be a superset of those values used for similar Fintek chips which do
not support automatic duty mode, with 2 mapping to automatic speed mode,
and moving automatic duty mode to the new value 4.
Toggling the duty mode via pwm_enable is currently denied for the F75387,
as the chip then simply reinterprets the fan configuration register values
according to the new mode, switching between RPM and PWM units, which
makes this a dangerous operation.
This patch introduces a new pwm mode into the driver. This is necessary
because the new mode (automatic pwm mode, 4) may already be enabled by the
BIOS, and the driver should not break existing functionality. This was seen
on at least one board.
Signed-off-by: Nikolaus Schulz <mail@microschulz.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Watchdog updates from Wim Van Sebroeck:
* git://www.linux-watchdog.org/linux-watchdog:
watchdog: fix GETTIMEOUT ioctl in booke_wdt
watchdog: update maintainers git entry
watchdog: Fix typo in pnx4008_wdt.c
watchdog: Fix typo in Kconfig
watchdog: fix error in probe() of s3c2410_wdt (reset at booting)
watchdog: hpwdt: clean up set_memory_x call for 32 bit
Marvell reference boards most of which are probably used with their BSPs
rather than with mainline so low risk.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=HVC8
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull from Mark Brown:
"A simple, driver specific fix. This device isn't widely used outside
of Marvell reference boards most of which are probably used with their
BSPs rather than with mainline so low risk."
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: fix the ldo configure according to 88pm860x spec
i2c bugfix from Wolfram Sang:
"This patch fixes a wrong assumption in the mxs-i2c-driver about a
command queue being done. Without it, we have seen races when the
bus was under load."
* 'i2c-embedded/for-3.3' of git://git.pengutronix.de/git/wsa/linux-2.6:
i2c: mxs: only flag completion when queue is completely done
DRM fixes from Dave Airlie:
intel: fixes for output regression on 965GM, an oops and a machine
hang
radeon: uninitialised var (that gcc didn't warn about for some reason)
+ a couple of correctness fixes.
exynos: fixes for various things, drop some chunks of unused code.
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon/kms/vm: fix possible bug in radeon_vm_bo_rmv()
drm/radeon: fix uninitialized variable
drm/radeon/kms: fix radeon_dp_get_modes for LVDS bridges (v2)
drm/i915: Remove use of the autoreported ringbuffer HEAD position
drm/i915: Prevent a machine hang by checking crtc->active before loading lut
drm/i915: fix operator precedence when enabling RC6p
drm/i915: fix a sprite watermark computation to avoid divide by zero if xpos<0
drm/i915: fix mode set on load pipe. (v2)
drm/exynos: exynos_drm.h header file fixes
drm/exynos: added panel physical size.
drm/exynos: added postclose to release resource.
drm/exynos: removed exynos_drm_fbdev_recreate function.
drm/exynos: fixed page flip issue.
drm/exynos: added possible_clones setup function.
drm/exynos: removed pageflip_event_list init code when closed.
drm/exynos: changed priority of mixer layers.
drm/exynos: Fix typo in exynos_mixer.c
Fix race conditions with unplug/replug behavior, in particular
take care not to hold up USB probe/disconnect for long-running
framebuffer operations and rely on usb to handle teardown.
Fix for kernel panic reported with new F17 multiseat support.
Reported-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Bernie Thompson <bernie@plugable.com>
commit e562966dba added support for S4 to
the balloon driver. The freeze function did nothing to free the pages,
since reclaiming the pages from the host to immediately give them back
(if S4 was successful) seemed wasteful. Also, if S4 wasn't successful,
the guest would have to re-fill the balloon. On restore, the pages were
supposed to be marked freed and the free page counters were incremented
to reflect the balloon was totally deflated.
However, this wasn't done right. The pages that were earlier taken away
from the guest during a balloon inflation operation were just shown as
used pages after a successful restore from S4. Just a fancy way of
leaking lots of memory.
Instead of trying that, just leak the balloon on freeze and fill it on
restore/thaw paths. This works properly now. The optimisation to not
leak can be added later on after a bit of refactoring of the code.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
ovl->enable/disable are meant to be synchronous so that they can handle
the configuration of fifo sizes. The current kernel doesn't configure
fifo sizes yet, and so the code doesn't need to block to function (from
omapdss driver's perspective).
However, for the users of omapdss a non-blocking ovl->disable is
confusing, because they don't know when the memory area is not used
any more.
Furthermore, when the fifo size configuration is added in the next merge
window, the change from non-blocking to blocking could cause side
effects to the users of omapdss. So by making the functions block
already will keep them behaving in the same manner.
And, while not the main purpose of this patch, this will also remove the
compile warning:
drivers/video/omap2/dss/apply.c:350: warning:
'wait_pending_extra_info_updates' defined but not used
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
panel-dvi uses i2c, but the Kconfig didn't have dependency on I2C. Add
it.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
bits are all for devices that still need to get set up in board code.
Only three platforms are in this set of fixes: omap2+, pxa and lpc32xx.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=ElaK
-----END PGP SIGNATURE-----
Merge tag 'fixes-3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Arnd Bergmann says:
"Another set of arm-soc bug fixes on top of v3.3-rc5. The few larger
bits are all for devices that still need to get set up in board code.
Only three platforms are in this set of fixes: omap2+, pxa and lpc32xx."
* tag 'fixes-3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits)
ARM: LPC32xx: serial.c: Fixed loop limit
ARM: LPC32xx: serial.c: HW bug workaround
ARM: LPC32xx: irq.c: Clear latched event
ARM: LPC32xx: Fix interrupt controller init
ARM: LPC32xx: Fix irq on GPI_28
ARM: OMAP2: fix mailbox init code
ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators
ARM: OMAP1: Fix out-of-bounds array access for Innovator
OMAP3 EVM: remove out-of-bounds array access of gpio_leds
ARM: OMAP: Fix build error when mmc_omap is built as module
ARM: OMAP: Fix kernel panic with HSMMC when twl4030_gpio is a module
pxa/hx4700: add platform device and I2C info for AK4641 codec
arch/arm/mach-pxa/: included linux/gpio.h twice
arch/arm/mach-mmp/: some files include some headers twice
ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probe
ARM: pxa: fix including linux/gpio.h twice
ARM: pxa: fix mixed declarations and code in sharpsl_pm
ARM: pxa: fix wrong parsing gpio event on spitz
ARM: OMAP2+: usb-host: fix compile warning
ARM: OMAP4: Move the barrier memboclk_steal() as part of reserve callback
...
The bo is removed from the list at the top of
radeon_vm_bo_rmv(), but then the list is used
in radeon_vm_bo_update_pte() to look up the vm.
remove the bo_list entry at the end of the
function instead.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <j.glisse@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Without this fix the driver randomly treats
textures as arrays and I'm really wondering
why gcc isn't complaining about it.
Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Need to call ExternalEncoderControl to set up DDC before
trying to get an EDID for all DP bridge chips (including
DP to LVDS).
Also remove redundant encoder assignment.
V2: fix typo in commit message.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Commit dcfb748422 ([WATCHDOG] fix book E watchdog to take
WDIOC_SETTIMEOUT arg in seconds) fixed SETTIMEOUT ioctl
to use seconds as a parameter instead of some hardware-specific
"period", but missed to apply similar changes to GETTIMEOUT,
so it still returns "period" value. Let's fix it!
Also, while at it, make SETTIMEOUT ioctl return real timeout
value as it should do according to the documentation.
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
For the F75387, the register holding the current PWM duty cycle value is
r/o; changing it requires writing to the fan expect register instead.
Signed-off-by: Nikolaus Schulz <mail@microschulz.de>
[guenter.roeck@ericsson.com: Simplified function parameters]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
All the fixes are for the OMAP IOMMU driver. The first patch is the
biggest one. It fixes the calls of the function omap_find_iovm_area() in
the omap-iommu-debug module which expects a 'struct device' parameter
since commit fabdbca instead of an omap_iommu handle. The
omap-iommu-debug code still passed the handle to the function which
caused a crash.
The second patch fixes a NULL pointer dereference in the OMAP code and
the third patch makes sure that the omap-iommu is initialized before the
omap-isp driver, which relies on the iommu. The last patch is only a
workaround until defered probing is implemented.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=aclV
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v3.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
IOMMU fixes for Linux 3.3-rc5
All the fixes are for the OMAP IOMMU driver. The first patch is the
biggest one. It fixes the calls of the function omap_find_iovm_area() in
the omap-iommu-debug module which expects a 'struct device' parameter
since commit fabdbca instead of an omap_iommu handle. The
omap-iommu-debug code still passed the handle to the function which
caused a crash.
The second patch fixes a NULL pointer dereference in the OMAP code and
the third patch makes sure that the omap-iommu is initialized before the
omap-isp driver, which relies on the iommu. The last patch is only a
workaround until defered probing is implemented.
* tag 'iommu-fixes-v3.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
ARM: OMAP: make iommu subsys_initcall to fix builtin omap3isp
iommu/omap: fix NULL pointer dereference
iommu/omap: fix erroneous omap-iommu-debug API calls
Probe function of s3c2410 watchdog calls request_irq before initializing
required value (wdt_count). This incurs resetting watchdog counter value
and watchdog-reboot during booting up.
This patch addresses such an issue by calling request_irq later.
Error handling in probe function and calling oder in remove function are
also revised accordingly.
Reported-by: Chanwoo Park <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
1. address has to be page aligned.
2. set_memory_x uses page size argument, not size.
Bug causes with following commit:
commit da28179b4e90dda56912ee825c7eaa62fc103797
Author: Mingarelli, Thomas <Thomas.Mingarelli@hp.com>
Date: Mon Nov 7 10:59:00 2011 +0100
watchdog: hpwdt: Changes to handle NX secure bit in 32bit path
commit e67d668e14 upstream.
This patch makes use of the set_memory_x() kernel API in order
to make necessary BIOS calls to source NMIs.
Signed-off-by: Maxim Uvarov <maxim.uvarov@oracle.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@vger.kernel.org>
Broken by commit 6ef84509f3 for users
passing a request with non-zero 'nbytes' field, like e.g. testmgr.
Cc: <stable@kernel.org> # 3.0+
Signed-off-by: Phil Sutter <phil.sutter@viprinet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel:
drm/i915: Remove use of the autoreported ringbuffer HEAD position
drm/i915: Prevent a machine hang by checking crtc->active before loading lut
drm/i915: fix operator precedence when enabling RC6p
drm/i915: fix a sprite watermark computation to avoid divide by zero if xpos<0
drm/i915: fix mode set on load pipe. (v2)
This is a revert of 6aa56062ea.
This was originally introduced to workaround reads of the ringbuffer
registers returning 0 on SandyBridge causing hangs due to ringbuffer
overflow. The root cause here was reads through the GT powerwell require
the forcewake dance, something we only learnt of later. Now it appears
that reading the reported head position from the HWS is returning
garbage, leading once again to hangs.
For example, on q35 the autoreported head reports:
[ 217.975608] head now 00010000, actual 00010000
[ 436.725613] head now 00200000, actual 00200000
[ 462.956033] head now 00210000, actual 00210010
[ 485.501409] head now 00400000, actual 00400020
[ 508.064280] head now 00410000, actual 00410000
[ 530.576078] head now 00600000, actual 00600020
[ 553.273489] head now 00610000, actual 00610018
which appears reasonably sane. In contrast, if we look at snb:
[ 141.970680] head now 00e10000, actual 00008238
[ 141.974062] head now 02734000, actual 000083c8
[ 141.974425] head now 00e10000, actual 00008488
[ 141.980374] head now 032b5000, actual 000088b8
[ 141.980885] head now 03271000, actual 00008950
[ 142.040628] head now 02101000, actual 00008b40
[ 142.180173] head now 02734000, actual 00009050
[ 142.181090] head now 00000000, actual 00000ae0
[ 142.183737] head now 02734000, actual 00009050
In addition, the automatic reporting of the head position is scheduled
to be defeatured in the future. It has no more utility, remove it.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45492
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
