When netif_is_rxfh_configured() is true (i.e., the user has explicitly
configured the RSS indirection table), virtnet_set_queues() skips the
RSS update path and falls through to the VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET
command to change the number of queue pairs. However, it does not update
vi->rss_trailer.max_tx_vq to reflect the new queue_pairs value.
This causes a mismatch between vi->curr_queue_pairs and
vi->rss_trailer.max_tx_vq. Any subsequent RSS reconfiguration (e.g.,
via ethtool -X) calls virtnet_commit_rss_command(), which sends the
stale max_tx_vq to the device, silently reverting the queue count.
Reproduction:
1. User configured RSS
ethtool -X eth0 equal 8
2. VQ_PAIRS_SET path; max_tx_vq stays 16
ethtool -L eth0 combined 12
3. RSS commit uses max_tx_vq=16 instead of 12
ethtool -X eth0 equal 4
Fix this by updating vi->rss_trailer.max_tx_vq after a successful
VQ_PAIRS_SET command when RSS is enabled, keeping it in sync with
curr_queue_pairs.
Fixes: 50bfcaedd7 ("virtio_net: Update rss when set queue")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260416212121.29073-1-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These are the contents that arrived during the easter vacation and didn't
make it into the last 7.0 bugfixes or the first set of branches for the
merge window. Aside from a reset controller bugfix and an update to the
MAINTAINERS entry, this is all devicetree changes.
The Marvell devicetree updates contain the usual minor updates and bugfixes,
along with a two larger but trivial patches to drop unused dtsi files,
the single broadcom fix addresses a build time warning introduced during
the merge window.
The freescale, amlogic, and apple changes missed the last fixes branch
for 7.0.
-----BEGIN PGP SIGNATURE-----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=XY6v
-----END PGP SIGNATURE-----
Merge tag 'soc-late-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC updates from Arnd Bergmann:
"These are the contents that arrived during the easter vacation and
didn't make it into the last 7.0 bugfixes or the first set of branches
for the merge window. Aside from a reset controller bugfix and an
update to the MAINTAINERS entry, this is all devicetree changes.
The Marvell devicetree updates contain the usual minor updates and
bugfixes, along with a two larger but trivial patches to drop unused
dtsi files, the single broadcom fix addresses a build time warning
introduced during the merge window.
The freescale, amlogic, and apple changes missed the last fixes branch
for 7.0"
* tag 'soc-late-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
arm64: dts: meson-gxl-p230: fix ethernet PHY interrupt number
arm64: dts: amlogic: meson-axg: Add missing cache information to cpu0
arm64: dts: amlogic: t7: khadas-vim4: fix board model name
arm64: dts: amlogic: Fix GIC register ranges for Amlogic T7
arm64: dts: amlogic: t7: khadas-vim4: fix memory layout for 8GB RAM
arm64: dts: amlogic: s6: Drop CPU masks from GICv3 PPI interrupts
Documentation/process: maintainer-soc: Document purpose of defconfigs
Documentation/process: maintainer-soc: Trim from trivial ask-DT
ARM: dts: bcm4709: fix bus range assignment
arm64: dts: apple: Fix spelling error
dt-bindings: Update Sasha Finkelstein's email address
mailmap: Update Sasha Finkelstein's email address
arm64: dts: marvell: armada-37xx: swap PHYs' order in USB3 controller node
arm64: dts: marvell: armada-37xx: use 'usb2-phy' in USB3 controller's phy-names
arm64: dts: imx8mm-tqma8mqml: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mn-tqma8mqnl: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mm-emtop-som: Correct PAD settings for PMIC_nINT
reset: amlogic: t7: Fix null reset ops
arm64: dts: imx8mp-data-modul-edm-sbc: Correct PAD settings for PMIC_nINT
arm64: dts: imx8mp-dhcom-som: Correct PAD settings for PMIC_nINT
...
After having added some more code to libpwm checking the pwm rounding
rules for the userspace interface I spotted an issue in the pwm-stm32
driver where in some cases involving inverted polarity the wrong
hardware settings for the duty offset are chosen. I think it has little
practical effect because the duty offset is in most cases an artificial
property of the output waveform. Still it's relevant to get this fixed
because this driver serves as a reference implementation for the still
young waveform API.
The second fix addresses a sleep-in-atomic issue in the pwm-atmel-tcb
driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmnpynoACgkQj4D7WH0S
/k4NnwgAuxWsy1gj6zvU14lg/5ejZih5S1RmvHDrFLQJWyV8kXGhbLoWnZZZ1FLT
Oo2V5dwRcJEPty6Yw/E8SV5KVcnGwQd3UrmuqQTPHwwLaff08KrZB4DoLtfLXAiN
QyVmz1n/kaid3VD4EbUYFvv5zCqMcrk4nZGanEm1o1VLn739AhsI/lpfAcRAoHaT
ySHUqo2l8sN1vtAY9Av/8DBP8r8RzQmdxVHL0hG/rD2Rw4tIoVPYwU2eyD+s7DwB
Vou/ssqwibofoQoJfbESNbFdJJYEQZmsiHPDTIGZCAJoJOpTMbHxaBJZqWIzs4jv
I5CAgi9FQq1N3SeSl2E8yoWbsPkb6g==
=W/Xm
-----END PGP SIGNATURE-----
Merge tag 'pwm/fixes-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"Two driver fixes
After having added some more code to libpwm checking the pwm rounding
rules for the userspace interface I spotted an issue in the pwm-stm32
driver where in some cases involving inverted polarity the wrong
hardware settings for the duty offset are chosen. I think it has
little practical effect because the duty offset is in most cases an
artificial property of the output waveform. Still it's relevant to get
this fixed because this driver serves as a reference implementation
for the still young waveform API.
The second fix addresses a sleep-in-atomic issue in the pwm-atmel-tcb
driver"
* tag 'pwm/fixes-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: atmel-tcb: Cache clock rates and mark chip as atomic
pwm: stm32: Fix rounding issue for requests with inverted polarity
Commit 3bce3fdd1f ("drm: rcar-du: Don't leak device_link to CMM")
refactored CMM handling, and introduced an incorrect test for CMM
availability. When no CMM is present, the rcrtc->cmm field is NULL,
testing rcrtc->cmm->dev causes a NULL pointer dereference. This slipped
through testing as all tests were run with the CMM present.
Fix this issue by correctly testing for rcrtc->cmm.
Fixes: 3bce3fdd1f ("drm: rcar-du: Don't leak device_link to CMM")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/dri-devel/CAMuHMdXomz9GFDqkBjGX9Sda_GLccPcrihvFbOz0GAitDVNTbw@mail.gmail.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260408124205.1962448-1-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
(cherry picked from commit 3e9a1da270)
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Matthieu Baerts says:
====================
mptcp: sync the msk->sndbuf at accept() time
On passive MPTCP connections, the MPTCP socket send buffer doesn't have
the expected size at accept() time.
Patch 1 fixes the regression introduced in v6.7, while the following one
validates the fix in the selftests.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
====================
Link: https://patch.msgid.link/20260420-net-mptcp-sync-sndbuf-accept-v1-0-e3523e3aeb44@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a new chk_sndbuf() helper to diag.sh that extracts the sndbuf
(the 'tb' field from 'ss -m' skmem output) for both server and
client MPTCP sockets, and verifies they are equal.
Without the previous patch, it will fail:
'''
07 ....chk sndbuf server/client [FAIL] sndbuf S=20480 != C=2630656
'''
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260420-net-mptcp-sync-sndbuf-accept-v1-2-e3523e3aeb44@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On passive MPTCP connections, the msk sndbuf is not updated correctly.
The root cause is an order issue in the accept path:
- tcp_check_req() -> subflow_syn_recv_sock() -> mptcp_sk_clone_init()
calls __mptcp_propagate_sndbuf() to copy the ssk sndbuf into msk
- Later, tcp_child_process() -> tcp_init_transfer() ->
tcp_sndbuf_expand() grows the ssk sndbuf.
So __mptcp_propagate_sndbuf() runs before the ssk sndbuf has been
expanded and the msk ends up with a much smaller sndbuf than the
subflow:
MPTCP: msk->sndbuf:20480, msk->first->sndbuf:2626560
Fix this by moving the __mptcp_propagate_sndbuf() call from
mptcp_sk_clone_init() -- the ssk sndbuf is not yet finalized there -- to
__mptcp_propagate_sndbuf() at accept() time, when the ssk sndbuf has
been fully expanded by tcp_sndbuf_expand().
Fixes: 8005184fd1 ("mptcp: refactor sndbuf auto-tuning")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/602
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260420-net-mptcp-sync-sndbuf-accept-v1-1-e3523e3aeb44@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
virtio_transport_init_zcopy_skb() uses iter->count as the size argument
for msg_zerocopy_realloc(), which in turn passes it to
mm_account_pinned_pages() for RLIMIT_MEMLOCK accounting. However, this
function is called after virtio_transport_fill_skb() has already consumed
the iterator via __zerocopy_sg_from_iter(), so on the last skb, iter->count
will be 0, skipping the RLIMIT_MEMLOCK enforcement.
Pass pkt_len (the total bytes being sent) as an explicit parameter to
virtio_transport_init_zcopy_skb() instead of reading the already-consumed
iter->count.
This matches TCP and UDP, which both call msg_zerocopy_realloc() with
the original message size.
Fixes: 581512a6dc ("vsock/virtio: MSG_ZEROCOPY flag support")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260420132051.217589-1-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ublk_shmem_remove_ranges() calls unpin_user_pages() while holding the
maple tree spinlock (mas_lock). Although unpin_user_pages() is safe in
atomic context, holding the spinlock across potentially many page
unpinning operations is not ideal.
Split into __ublk_shmem_remove_ranges() which erases up to 64 ranges
under mas_lock, collecting base_pfn and nr_pages into a temporary
xarray. Then drop the lock and unpin pages outside spinlock context.
ublk_shmem_remove_ranges() loops until all matching ranges are
processed.
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260423033058.2805135-4-tom.leiming@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Extract the shared walk+erase+unpin+kfree loop into
ublk_shmem_remove_ranges(). When buf_index >= 0, only ranges matching
that index are removed; when buf_index < 0, all ranges are removed.
Also extract ublk_unpin_range_pages() to share the page unpinning
loop.
Convert both __ublk_ctrl_unreg_buf() and ublk_buf_cleanup() to use
the new helper.
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260423033058.2805135-3-tom.leiming@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk_buf_cleanup() iterates the maple tree with mas_for_each()
without holding mas_lock, triggering a lockdep splat on
CONFIG_PROVE_RCU kernels since mas_find() internally uses
rcu_dereference_check() which requires either RCU or the tree lock.
Fix by holding mas_lock around the iteration, and call mas_erase()
before freeing each range to avoid dangling pointers in the tree.
Fixes: 5e864438e2 ("ublk: replace xarray with IDA for shmem buffer index allocation")
Reported-by: Jens Axboe <axboe@kernel.dk>
Closes: https://lore.kernel.org/linux-block/0349d72d-dff8-4f9f-b448-919fa5ae96da@kernel.dk/
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260423033058.2805135-2-tom.leiming@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The end-to-end integrity ublk selftest test_integrity_02 requires a
relatively recent fio version to support I/O with integrity buffers. Add
a version test_integrity_03 that uses the block layer's auto integrity
path instead. The auto integrity code doesn't check the application tag,
and doesn't indicate the bad guard/ref tag (just returns EILSEQ). But
it's a good smoke-test of the ublk integrity code and provides coverage
of the auto integrity path as well.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260421200901.1528842-4-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
fio 3.42 was released with the needed fix for test_integrity_02.sh.
Allow 3.42 and newer in the fio version check.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260421200901.1528842-3-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The _cleanup helper function doesn't take any arguments, so drop them
from its callers.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260421200901.1528842-2-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Erni Sri Satya Vennela says:
====================
net: mana: Fix probe/remove error path bugs
Fix five bugs in mana_probe()/mana_remove() error handling that can
cause warnings on uninitialized work structs, NULL pointer dereferences,
masked errors, and resource leaks when early probe steps fail.
Patches 1-2 move work struct initialization (link_change_work and
gf_stats_work) to before any error path that could trigger
mana_remove(), preventing WARN_ON in __flush_work() or debug object
warnings when sync cancellation runs on uninitialized work structs.
Patch 3 guards mana_remove() against double invocation. If PM resume
fails, mana_probe() calls mana_remove() which sets gdma_context and
driver_data to NULL. A failed resume does not unbind the driver, so
when the device is eventually unbound, mana_remove() is called again
and dereferences NULL, causing a kernel panic. An early return on
NULL gdma_context or driver_data makes the second call harmless.
Patch 4 prevents add_adev() from overwriting a port probe error,
which could leave the driver in a broken state with NULL ports while
reporting success.
Patch 5 changes 'goto out' to 'break' in mana_remove()'s port loop
so that mana_destroy_eq() is always reached, preventing EQ leaks when
a NULL port is encountered.
====================
Link: https://patch.msgid.link/20260420124741.1056179-1-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In mana_remove(), when a NULL port is encountered in the port iteration
loop, 'goto out' skips the mana_destroy_eq(ac) call, leaking the event
queues allocated earlier by mana_create_eq().
This can happen when mana_probe_port() fails for port 0, leaving
ac->ports[0] as NULL. On driver unload or error cleanup, mana_remove()
hits the NULL entry and jumps past mana_destroy_eq().
Change 'goto out' to 'break' so the for-loop exits normally and
mana_destroy_eq() is always reached. Remove the now-unreferenced out:
label.
Fixes: 1e2d0824a9 ("net: mana: Add support for EQ sharing")
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Link: https://patch.msgid.link/20260420124741.1056179-6-ernis@linux.microsoft.com
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In mana_probe(), if mana_probe_port() fails for any port, the error
is stored in 'err' and the loop breaks. However, the subsequent
unconditional 'err = add_adev(gd, "eth")' overwrites this error.
If add_adev() succeeds, mana_probe() returns success despite ports
being left in a partially initialized state (ac->ports[i] == NULL).
Only call add_adev() when there is no prior error, so the probe
correctly fails and triggers mana_remove() cleanup.
Fixes: a69839d432 ("net: mana: Add support for auxiliary device")
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Link: https://patch.msgid.link/20260420124741.1056179-5-ernis@linux.microsoft.com
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If PM resume fails (e.g., mana_attach() returns an error), mana_probe()
calls mana_remove(), which tears down the device and sets
gd->gdma_context = NULL and gd->driver_data = NULL.
However, a failed resume callback does not automatically unbind the
driver. When the device is eventually unbound, mana_remove() is invoked
a second time. Without a NULL check, it dereferences gc->dev with
gc == NULL, causing a kernel panic.
Add an early return if gdma_context or driver_data is NULL so the second
invocation is harmless. Move the dev = gc->dev assignment after the
guard so it cannot dereference NULL.
Fixes: 635096a86e ("net: mana: Support hibernation and kexec")
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Link: https://patch.msgid.link/20260420124741.1056179-4-ernis@linux.microsoft.com
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move INIT_DELAYED_WORK(gf_stats_work) to before mana_create_eq(),
while keeping schedule_delayed_work() at its original location.
Previously, if any function between mana_create_eq() and the
INIT_DELAYED_WORK call failed, mana_probe() would call mana_remove()
which unconditionally calls cancel_delayed_work_sync(gf_stats_work)
in __flush_work() or debug object warnings with
CONFIG_DEBUG_OBJECTS_WORK enabled.
Fixes: be4f1d67ec ("net: mana: Add standard counter rx_missed_errors")
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Link: https://patch.msgid.link/20260420124741.1056179-3-ernis@linux.microsoft.com
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move INIT_WORK(link_change_work) to right after the mana_context
allocation, before any error path that could reach mana_remove().
Previously, if mana_create_eq() or mana_query_device_cfg() failed,
mana_probe() would jump to the error path which calls mana_remove().
mana_remove() unconditionally calls disable_work_sync(link_change_work),
but the work struct had not been initialized yet. This can trigger
CONFIG_DEBUG_OBJECTS_WORK enabled.
Fixes: 54133f9b4b ("net: mana: Support HW link state events")
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Link: https://patch.msgid.link/20260420124741.1056179-2-ernis@linux.microsoft.com
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
trim_newline() unconditionally dereferences s[len - 1] after computing
len = strnlen(s, maxlen). When the string is empty, len is 0 and the
expression underflows to s[(size_t)-1], reading (and potentially
writing) one byte before the buffer.
The two callers feed trim_newline() with the result of strscpy() from
configfs store callbacks (dev_name_store, userdatum_value_store).
configfs guarantees count >= 1 reaches the callback, but the byte
itself can be NUL: a userspace write(fd, "\0", 1) leaves the
destination empty after strscpy() and triggers the underflow. The OOB
write only fires if the adjacent byte happens to be '\n', so this is
not a security issue, but the access is undefined behaviour either way.
This pattern is commonly flagged by LLM-based code reviewers. While it
is not a security fix, the underlying access is undefined behaviour and
the change is small and self-contained, so it is a reasonable candidate
for the stable trees.
Guard the dereference on a non-zero length.
Fixes: ae001dc679 ("net: netconsole: move newline trimming to function")
Cc: stable@vger.kernel.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260420-netcons_trim_newline-v1-1-dc35889aeedf@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If airoha_qdma_init routine fails before airoha_qdma_tx_irq_init() runs
successfully for all TX NAPIs, airoha_qdma_cleanup() will
unconditionally runs netif_napi_del() on TX NAPIs, triggering a NULL
pointer dereference. Fix the issue relying on q_tx_irq size value to
check if the TX NAPIs is properly initialized in airoha_qdma_cleanup().
Moreover, run netif_napi_add_tx() just if irq_q queue is properly
allocated.
Fixes: 23020f0493 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260420-airoha_qdma_init_rx_queue-fix-v2-2-d99347e5c18d@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If queue entry or DMA descriptor list allocation fails in
airoha_qdma_init_rx_queue routine, airoha_qdma_cleanup() will trigger a
NULL pointer dereference running netif_napi_del() for RX queue NAPIs
since netif_napi_add() has never been executed to this particular RX NAPI.
The issue is due to the early ndesc initialization in
airoha_qdma_init_rx_queue() since airoha_qdma_cleanup() relies on ndesc
value to check if the queue is properly initialized. Fix the issue moving
ndesc initialization at end of airoha_qdma_init_tx routine.
Move page_pool allocation after descriptor list allocation in order to
avoid memory leaks if desc allocation fails.
Fixes: 23020f0493 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260420-airoha_qdma_init_rx_queue-fix-v2-1-d99347e5c18d@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
vlan_dev_set_egress_priority() currently keeps cleared egress
priority mappings in the hash as tombstones. Repeated set/clear cycles
with distinct skb priorities therefore accumulate mapping nodes until
device teardown and leak memory.
Delete mappings when vlan_prio is cleared instead of keeping tombstones.
Now that the egress mapping lists are RCU protected, the node can be
unlinked safely and freed after a grace period.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@kernel.org
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Longxuan Yu <ylong030@ucr.edu>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Link: https://patch.msgid.link/ecfa6f6ce2467a42647ff4c5221238ae85b79a59.1776647968.git.yuantan098@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The TX fast path and reporting paths walk egress QoS mappings without
RTNL. Convert the mapping lists to RCU-protected pointers, use RCU
reader annotations in readers, and defer freeing mapping nodes with an
embedded rcu_head.
This prepares the egress QoS mapping code for safe removal of mapping
nodes in a follow-up change while preserving the current behavior.
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Longxuan Yu <ylong030@ucr.edu>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Link: https://patch.msgid.link/9136768189f8c6d3f824f476c62d2fa1111688e8.1776647968.git.yuantan098@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=6RJG
-----END PGP SIGNATURE-----
Merge tag 'nf-26-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following batch contains Netfilter/IPVS fixes for net:
1) nft_osf actually only supports IPv4, restrict it.
2) Address possible division by zero in nfnetlink_osf, from Xiang Mei.
3) Remove unsafe use of sprintf to fix possible buffer overflow
in the SIP NAT helper, from Florian Westphal.
4) Restrict xt_mac, xt_owner and xt_physdev to inet families only;
xt_realm is only for ipv4, otherwise null-pointer-deref is possible.
5) Use kfree_rcu() in nat core to release hooks, this can be an issue
once nfnetlink_hook gets support to dump NAT hook information, not
currently a real issue but better fix it now. From Florian Westphal.
6) Fix MTU checks in IPVS, from Yingnan Zhang.
7) Fix possible out-of-bounds when matching TCP options in
nfnetlink_osf, from Fernando Fernandez Mancera.
8) Fix potential nul-ptr-deref in ttl check in nfnetlink_osf,
remove useless loop to fix this, also from Fernando.
This is a smaller batch, there are more patches pending in the queue
to arm another pull request as soon as this is considered good enough.
AI might complain again about one more issue regarding osf and
big-endian arches in osf but this batch is targetting crash fixes for
osf at this stage.
netfilter pull request 26-04-20
* tag 'nf-26-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nfnetlink_osf: fix potential NULL dereference in ttl check
netfilter: nfnetlink_osf: fix out-of-bounds read on option matching
ipvs: fix MTU check for GSO packets in tunnel mode
netfilter: nat: use kfree_rcu to release ops
netfilter: xtables: restrict several matches to inet family
netfilter: conntrack: remove sprintf usage
netfilter: nfnetlink_osf: fix divide-by-zero in OSF_WSS_MODULO
netfilter: nft_osf: restrict it to ipv4
====================
Link: https://patch.msgid.link/20260420220215.111510-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We'd like to address the problem rather in the error code path of
platform_device_register() itself instead of leaving it all callers,
since less than 1% of all callers of over 100
platform_device_register() do call platform_device_put() properly as
of now.
For making the work easier, revert the previous change commit
4ff036f952 ("ALSA: pcmtest: fix reference leak on failed device
registration") again.
Link: https://lore.kernel.org/20260415193138.3861297-1-lgs201920130244@gmail.com
Link: https://patch.msgid.link/20260423075211.3977366-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The RTL8365MB_DIGITAL_INTERFACE_SELECT_MODE_MASK macro was shifting
the 4-bit mask (0xF) by only (_extint % 2) bits instead of
(_extint % 2) * 4. This caused the mask to overlap with the adjacent
nibble when configuring odd-numbered external interfaces, selecting
the wrong bits entirely.
Align the shift calculation with the existing ...MODE_OFFSET macro.
Fixes: 4af2950c50 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC")
Signed-off-by: Abdulkader Alrezej <alrazj.abdulkader@gmail.com>
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://patch.msgid.link/400a6387-a444-4576-af6d-26be5410bce3@yahoo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Chaitanya, John and Mikhail reported commit 25500ba7e7 ("locking/mutex:
Remove the list_head from struct mutex") wrecked ww_mutex.
Specifically there were 2 issues:
- __ww_waiter_prev() had the termination condition wrong; it would terminate
when the previous entry was the first, which results in a truncated
iteration: W3, W2, (no W1).
- __mutex_add_waiter(@pos != NULL), as used by __ww_waiter_add() /
__ww_mutex_add_waiter(); this inserts @waiter before @pos (which is what
list_add_tail() does). But this should then also update lock->first_waiter.
Much thanks to Prateek for spotting the __mutex_add_waiter() issue!
Fixes: 25500ba7e7 ("locking/mutex: Remove the list_head from struct mutex")
Reported-by: "Borah, Chaitanya Kumar" <chaitanya.kumar.borah@intel.com>
Closes: https://lore.kernel.org/r/af005996-05e9-4336-8450-d14ca652ba5d%40intel.com
Reported-by: John Stultz <jstultz@google.com>
Closes: https://lore.kernel.org/r/CANDhNCq%3Doizzud3hH3oqGzTrcjB8OwGeineJ3mwZuGdDWG8fRQ%40mail.gmail.com
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Closes: https://lore.kernel.org/r/CABXGCsO5fKq2nD9nO8yO1z50ZzgCPWqueNXHANjntaswoOh2Dg@mail.gmail.com
Debugged-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://patch.msgid.link/20260422092335.GH3102924%40noisy.programming.kicks-ass.net
A fairly small collection of fixes, device IDs and quirks that came in
during the merge window, the most remarkable of which is one for SDCA
boolean firmware flags which is remarkable mainly because it is
partially in regmap.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmnpN3sACgkQJNaLcl1U
h9DW3Qf+L98HjSd8wqhDWPdb2Rj1NLsZzccPA9/lt6W5aebSrlvbpwa1GlnD0eIh
C+ZEDVzX6aUiZ0xcUqG6mBUrLScDcb408TW55n+iPr3yvQO4nf9fSd1mjaok07Cr
klR9lg+lg7GSMNyxVONpcLFpGWpIvZ3X+s/qUOeRg+gdhlrzubjTI0zS4GFbJDvL
8ekkHYm5rBa1YOU45Xoiisskc0MePNZF5V0/m8uoUuRVsE2vZyLzpewNXFAi5EHw
jc9b1u5Bk4GLk5alfp0IaqNhhgobYH3p+tnMwT0kdfjxT94vp4znyLt9uD0OGZCL
ATxOqguGC4qQixTgPucjKbfr9wRVcQ==
=qUKh
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v7.1-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.1
A fairly small collection of fixes, device IDs and quirks that came in
during the merge window, the most remarkable of which is one for SDCA
boolean firmware flags which is remarkable mainly because it is
partially in regmap.
Similar to airoha_qdma_cleanup_rx_queue(), reset DMA TX descriptors in
airoha_qdma_cleanup_tx_queue routine. Moreover, reset TX_DMA_IDX to
TX_CPU_IDX to notify the NIC the QDMA TX ring is empty.
Fixes: 23020f0493 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260417-airoha_qdma_cleanup_tx_queue-fix-net-v4-2-e04bcc2c9642@kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If queue entry list allocation fails in airoha_qdma_init_tx_queue routine,
airoha_qdma_cleanup_tx_queue() will trigger a NULL pointer dereference
accessing the queue entry array. The issue is due to the early ndesc
initialization in airoha_qdma_init_tx_queue(). Fix the issue moving ndesc
initialization at end of airoha_qdma_init_tx routine.
Fixes: 3f47e67dff ("net: airoha: Add the capability to consume out-of-order DMA tx descriptors")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260417-airoha_qdma_cleanup_tx_queue-fix-net-v4-1-e04bcc2c9642@kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order to do the following load-acquire and store-release tests on
LoongArch:
sudo ./test_progs -t verifier_load_acquire
sudo ./test_progs -t verifier_store_release
sudo ./test_progs -t verifier_precision/bpf_load_acquire
sudo ./test_progs -t verifier_precision/bpf_store_release
sudo ./test_progs -t compute_live_registers/atomic_load_acq_store_rel
It needs to enable CAN_USE_LOAD_ACQ_STORE_REL for LoongArch.
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Implement BPF_TRACE_FSESSION support in LoongArch BPF JIT. The logic
here is almost identical to what has been done in RISC-V JIT.
The key changes are:
- Allocate stack space for function meta and session cookies
- Introduce invoke_bpf() as a wrapper around invoke_bpf_prog() that
populates session cookies before each invocation
- Implement bpf_jit_supports_fsession() callback
Tested-by: Vincent Li <vincent.mc.li@gmail.com>
Reviewed-by: Menglong Dong <menglong8.dong@gmail.com>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Introduce a helper to store 64-bit immediate on the trampoline stack.
The helper will be used in the next patch. Also refactor the existing
code to use this helper.
Tested-by: Vincent Li <vincent.mc.li@gmail.com>
Reviewed-by: Menglong Dong <menglong8.dong@gmail.com>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
sfb_dump_stats() only runs with RTNL held,
reading fields that can be changed in qdisc fast path.
Add READ_ONCE()/WRITE_ONCE() annotations.
Alternative would be to acquire the qdisc spinlock, but our long-term
goal is to make qdisc dump operations lockless as much as we can.
tc_sfb_xstats fields don't need to be latched atomically,
otherwise this bug would have been caught earlier.
Fixes: edb09eb17e ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260421141655.3953721-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
red_dump_stats() only runs with RTNL held,
reading fields that can be changed in qdisc fast path.
Add READ_ONCE()/WRITE_ONCE() annotations.
Alternative would be to acquire the qdisc spinlock, but our long-term
goal is to make qdisc dump operations lockless as much as we can.
tc_red_xstats fields don't need to be latched atomically,
otherwise this bug would have been caught earlier.
Fixes: edb09eb17e ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260421142309.3964322-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fq_codel_dump_stats() acquires the qdisc spinlock a bit too late.
Move this acquisition before we fill st.qdisc_stats with live data.
Fixes: edb09eb17e ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260421142509.3967231-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pie_dump_stats() only runs with RTNL held,
reading fields that can be changed in qdisc fast path.
Add READ_ONCE()/WRITE_ONCE() annotations.
Alternative would be to acquire the qdisc spinlock, but our long-term
goal is to make qdisc dump operations lockless as much as we can.
tc_pie_xstats fields don't need to be latched atomically,
otherwise this bug would have been caught earlier.
Fixes: edb09eb17e ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260421142944.4009941-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hhf_dump_stats() only runs with RTNL held,
reading fields that can be changed in qdisc fast path.
Add READ_ONCE()/WRITE_ONCE() annotations.
Fixes: edb09eb17e ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260421143349.4052215-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jacob Keller says:
====================
Intel Wired LAN Driver Updates 2026-04-20 (ice)
Since this is a set of related fixes for just the ice driver, Jake provides
the following description for the series:
We recently ran into a nasty corner case issue with a customer operating
E825C cards seeing some strange behavior with missing Tx timestamps. During
the course of debugging. This series contains a few fixes found during this
debugging process.
The primary issue discovered in the investigation is a misconfiguration of
the E825C PHY timestamp interrupt register, PHY_REG_TS_INT_CONFIG. This
register is responsible for programming the Tx timestamp behavior of a PHY
port. The driver programs two values here: a threshold for when to
interrupt and whether the interrupt is enabled.
The threshold value is used by hardware to determine when to trigger a Tx
timestamp interrupt. The interrupt cause for the port is raised when the
number of outstanding timestamps in the PHY port timestamp memory meets the
threshold. The interrupt cause is not cleared until the number of
outstanding timestamps drops *below* the threshold.
It is considered a misconfiguration if the threshold is programmed to 0. If
the interrupt is enabled while the threshold is zero, hardware will raise
the interrupt cause at the next time it checks. Once raised, the interrupt
cause for the port will never lower, since you cannot have fewer than zero
outstanding timestamps.
Worse, the timestamp status for the port will remain high even if the
PHY_REG_TS_INT_CONFIG is reprogrammed with a new threshold. The PHY is a
separate hardware block from the MAC, and thus the interrupt status for the
port will remain high even if you reset the device MAC with a PF reset,
CORE reset, or GLOBAL reset.
PHY ports are connected together into quads. Each quad muxes the PHY
interrupt status for the 4 ports on the quad together before connecting
that to the MACs miscellaneous interrupt vector. As a result, if a single
PHY port in the quad is stuck, no timestamp interrupts will be generated
for any timestamp on any port on that quad.
The ice driver never directly writes a value of 0 for the threshold.
Indeed, the desired behavior is to set the threshold to 1, so that
interrupts are generated as soon as a single timestamp is captured.
Unfortunately, it turns out that for the E825C PHY, programming the
threshold and enable bit in the same write may cause a race in the PHY
timestamp block. The PHY may "see" the interrupt as enabled first before it
sees the threshold value. If the previous threshold value is zero (such as
when the register is initialized to zero at a cold power on), the hardware
may race with programming the threshold and set the PHY interrupt status to
high as described above.
The first patch in this series corrects that programming order, ensuring
that the threshold is always written first in a separate transaction from
enabling the interrupt bit. Additionally, an explicit check against writing
a 0 is added to make it clear to future readers that writing 0 to the
threshold while enabling the interrupt is not safe.
The PHY timestamp block does not reset with the MAC, and seems to only
reset during cold power on. This makes recovery from the faulty
configuration difficult. To address this, perform an explicit reset of the
PHY PTP block during initialization. This is achieved by writing the
PHY_REG_GLOBAL register. This performs a PHY soft reset, which completely
resets the timestamp block. This includes clearing the timestamp memory,
the PHY timestamp interrupt status, and the PHY PTP counter. A soft reset
of all ports on the device is done as part of ice_ptp_init_phc() during
early initialization of the PTP functionality by the PTP clock owner, prior
to programming each PHY. The ice_ptp_init_phc() function is called at
driver init and during reinitialization after all forms of device reset.
This ensures that the driver begins operation at a clean slate, rather than
carrying over the stale and potentially buggy configuration of a previous
driver.
While attempting to root cause the issue with the PHY timestamp interrupt,
we also discovered that the driver incorrectly assumes that it is operating
on E822 hardware when reading the PHY timestamp memory status registers in
a few places. This includes the check at the end of the interrupt handler,
as well as the check done inside the PTP auxiliary function. This prevented
the driver from detecting waiting timestamps on ports other than the first
two.
Finally, the ice_ptp_read_tx_hwstamp_status_eth56g() function was
discovered to only read the timestamp interrupt status value from the first
quad due to mistaking the port index for a PHY quad index. This resulted in
reporting the timestamp status for the second quad as identical to the
first quad instead of properly reporting its value. This is a minor fix
since the function currently is only used for diagnostic purposes and does
not impact driver decision logic.
====================
Link: https://patch.msgid.link/20260420-jk-iwl-net-2026-04-20-ptp-e825c-phy-interrupt-fixes-v1-0-bc2240f42251@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ice_ptp_read_tx_hwtstamp_status_eth56g function calls
ice_read_phy_eth56g with a PHY index. However the function actually expects
a port index. This causes the function to read the wrong PHY_PTP_INT_STATUS
registers, and effectively makes the status wrong for the second set of
ports from 4 to 7.
The ice_read_phy_eth56g function uses the provided port index to determine
which PHY device to read. We could refactor the entire chain to take a PHY
index, but this would impact many code sites. Instead, multiply the PHY
index by the number of ports, so that we read from the first port of each
PHY.
Fixes: 7cab44f1c3 ("ice: Introduce ETH56G PHY model for E825C products")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260420-jk-iwl-net-2026-04-20-ptp-e825c-phy-interrupt-fixes-v1-4-bc2240f42251@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The E800 hardware (apart from E810) has a ready bitmap for the PHY
indicating which timestamp slots currently have an outstanding timestamp
waiting to be read by software.
This bitmap is checked in multiple places using the
ice_get_phy_tx_tstamp_ready():
* ice_ptp_process_tx_tstamp() calls it to determine which timestamps to
attempt reading from the PHY
* ice_ptp_tx_tstamps_pending() calls it in a loop at the end of the
miscellaneous IRQ to check if new timestamps came in while the interrupt
handler was executing.
* ice_ptp_maybe_trigger_tx_interrupt() calls it in the auxiliary work task
to trigger a software interrupt in the event that the hardware logic
gets stuck.
For E82X devices, multiple PHYs share the same block, and the parameter
passed to the ready bitmap is a block number associated with the given
port. For E825-C devices, the PHYs have their own independent blocks and do
not share, so the parameter passed needs to be the port number. For E810
devices, the ice_get_phy_tx_tstamp_ready() always returns all 1s regardless
of what port, since this hardware does not have a ready bitmap. Finally,
for E830 devices, each PF has its own ready bitmap accessible via register,
and the block parameter is unused.
The first call correctly uses the Tx timestamp tracker block parameter to
check the appropriate timestamp block. This works because the tracker is
setup correctly for each timestamp device type.
The second two callers behave incorrectly for all device types other than
the older E822 devices. They both iterate in a loop using
ICE_GET_QUAD_NUM() which is a macro only used by E822 devices. This logic
is incorrect for devices other than the E822 devices.
For E810 the calls would always return true, causing E810 devices to always
attempt to trigger a software interrupt even when they have no reason to.
For E830, this results in duplicate work as the ready bitmap is checked
once per number of quads. Finally, for E825-C, this results in the pending
checks failing to detect timestamps on ports other than the first two.
Fix this by introducing a new hardware API function to ice_ptp_hw.c,
ice_check_phy_tx_tstamp_ready(). This function will check if any timestamps
are available and returns a positive value if any timestamps are pending.
For E810, the function always returns false, so that the re-trigger checks
never happen. For E830, check the ready bitmap just once. For E82x
hardware, check each quad. Finally, for E825-C, check every port.
The interface function returns an integer to enable reporting of error code
if the driver is unable read the ready bitmap. This enables callers to
handle this case properly. The previous implementation assumed that
timestamps are available if they failed to read the bitmap. This is
problematic as it could lead to continuous software IRQ triggering if the
PHY timestamp registers somehow become inaccessible.
This change is especially important for E825-C devices, as the missing
checks could leave a window open where a new timestamp could arrive while
the existing timestamps aren't completed. As a result, the hardware
threshold logic would not trigger a new interrupt. Without the check, the
timestamp is left unhandled, and new timestamps will not cause an interrupt
again until the timestamp is handled. Since both the interrupt check and
the backup check in the auxiliary task do not function properly, the device
may have Tx timestamps permanently stuck failing on a given port.
The faulty checks originate from commit d938a8cca8 ("ice: Auxbus devices
& driver for E822 TS") and commit 712e876371 ("ice: periodically kick Tx
timestamp interrupt"), however at the time of the original coding, both
functions only operated on E822 hardware. This is no longer the case, and
hasn't been since the introduction of the ETH56G PHY model in commit
7cab44f1c3 ("ice: Introduce ETH56G PHY model for E825C products")
Fixes: 7cab44f1c3 ("ice: Introduce ETH56G PHY model for E825C products")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260420-jk-iwl-net-2026-04-20-ptp-e825c-phy-interrupt-fixes-v1-3-bc2240f42251@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In some cases the PHY timestamp block of the E825C can become stuck. This
is known to occur if the software writes 0 to the Tx timestamp threshold,
and with older versions of the ice driver the threshold configuration is
buggy and can race in such that hardware briefly operates with a zero
threshold enabled. There are no other known ways to trigger this behavior,
but once it occurs, the hardware is not recovered by normal reset, a driver
reload, or even a warm power cycle of the system. A cold power cycle is
sufficient to recover hardware, but this is extremely invasive and can
result in significant downtime on customer deployments.
The PHY for each port has a timestamping block which has its own reset
functionality accessible by programming the PHY_REG_GLOBAL register.
Writing to the PHY_REG_GLOBAL_SOFT_RESET_BIT triggers the hardware to
perform a complete reset of the timestamping block of the PHY. This
includes clearing the timestamp status for the port, clearing all
outstanding timestamps in the memory bank, and resetting the PHY timer.
The new ice_ptp_phy_soft_reset_eth56g() function toggles the
PHY_REG_GLOBAL soft reset bit with the required delays, ensuring the
PHY is properly reinitialized without requiring a full device reset.
The sequence clears the reset bit, asserts it, then clears it again,
with short waits between transitions to allow hardware stabilization.
Call this function in the new ice_ptp_init_phc_e825c(), implementing the
E825C device specific variant of the ice_ptp_init_phc(). Note that if
ice_ptp_init_phc() fails, PTP functionality may be disabled, but the driver
will still load to allow basic functionality to continue.
This causes the clock owning PF driver to perform a PHY soft reset for
every port during initialization. This ensures the driver begins life in a
known functional state regardless of how it was previously programmed.
This ensures that we properly reconfigure the hardware after a device reset
or when loading the driver, even if it was previously misconfigured with an
out-of-date or modified driver.
Fixes: 7cab44f1c3 ("ice: Introduce ETH56G PHY model for E825C products")
Signed-off-by: Timothy Miskell <timothy.miskell@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260420-jk-iwl-net-2026-04-20-ptp-e825c-phy-interrupt-fixes-v1-2-bc2240f42251@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The E825C ice_phy_cfg_intr_eth56g() function is responsible for programming
the PHY interrupt for a given port. This function writes to the
PHY_REG_TS_INT_CONFIG register of the port. The register is responsible for
configuring whether the port interrupt logic is enabled, as well as
programming the threshold of waiting timestamps that will trigger an
interrupt from this port.
This threshold value must not be programmed to zero while the interrupt is
enabled. Doing so puts the port in a misconfigured state where the PHY
timestamp interrupt for the quad of connected ports will become stuck.
This occurs, because a threshold of zero results in the timestamp interrupt
status for the port becoming stuck high. The four ports in the connected
quad have their timestamp status indicators muxed together. A new interrupt
cannot be generated until the timestamp status indicators return low for
all four ports.
Normally, the timestamp status for a port will clear once there are fewer
timestamps in that ports timestamp memory bank than the threshold. A
threshold of zero makes this impossible, so the timestamp status for the
port does not clear.
The ice driver never intentionally programs the threshold to zero, indeed
the driver always programs it to a value of 1, intending to get an
interrupt immediately as soon as even a single packet is waiting for a
timestamp.
However, there is a subtle flaw in the programming logic in the
ice_phy_cfg_intr_eth56g() function. Due to the way that the hardware
handles enabling the PHY interrupt. If the threshold value is modified at
the same time as the interrupt is enabled, the HW PHY state machine might
enable the interrupt before the new threshold value is actually updated.
This leaves a potential race condition caused by the hardware logic where
a PHY timestamp interrupt might be triggered before the non-zero threshold
is written, resulting in the PHY timestamp logic becoming stuck.
Once the PHY timestamp status is stuck high, it will remain stuck even
after attempting to reprogram the PHY block by changing its threshold or
disabling the interrupt. Even a typical PF or CORE reset will not reset the
particular block of the PHY that becomes stuck. Even a warm power cycle is
not guaranteed to cause the PHY block to reset, and a cold power cycle is
required.
Prevent this by always writing the PHY_REG_TS_INT_CONFIG in two stages.
First write the threshold value with the interrupt disabled, and only write
the enable bit after the threshold has been programmed. When disabling the
interrupt, leave the threshold unchanged. Additionally, re-read the
register after writing it to guarantee that the write to the PHY has been
flushed upon exit of the function.
While we're modifying this function implementation, explicitly reject
programming a threshold of 0 when enabling the interrupt. No caller does
this today, but the consequences of doing so are significant. An explicit
rejection in the code makes this clear.
Fixes: 7cab44f1c3 ("ice: Introduce ETH56G PHY model for E825C products")
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260420-jk-iwl-net-2026-04-20-ptp-e825c-phy-interrupt-fixes-v1-1-bc2240f42251@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
