Based on commit d3fd06d0259232e1362c6d1da136970d26628467
Author: Johannes Berg <johannes.berg@intel.com>
Date: Sat Jan 25 10:17:18 2014 -0800
nl80211: vendor command support
Change-Id: I832eb4da295fe7b2c9bd8ff69ae80fe7bfe30add
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Add POWER_SUPPLY_PROP_CHARGE_COUNTER_EXT that stores accumulated charge
in nAh units as a signed 64-bit value.
Add generic support for signed 64-bit property values.
Change-Id: I2bd34b1e95ffba24e7bfef81f398f22bd2aaf05e
Signed-off-by: Todd Poynor <toddpoynor@google.com>
When using mark-based routing, sockets returned from accept()
may need to be marked differently depending on the incoming
connection request.
This is the case, for example, if different socket marks identify
different networks: a listening socket may want to accept
connections from all networks, but each connection should be
marked with the network that the request came in on, so that
subsequent packets are sent on the correct network.
This patch adds a sysctl to mark TCP sockets based on the fwmark
of the incoming SYN packet. If enabled, and an unmarked socket
receives a SYN, then the SYN packet's fwmark is written to the
connection's inet_request_sock, and later written back to the
accepted socket when the connection is established. If the
socket already has a nonzero mark, then the behaviour is the same
as it is today, i.e., the listening socket's fwmark is used.
Black-box tested using user-mode linux:
- IPv4/IPv6 SYN+ACK, FIN, etc. packets are routed based on the
mark of the incoming SYN packet.
- The socket returned by accept() is marked with the mark of the
incoming SYN packet.
- Tested with syncookies=1 and syncookies=2.
Change-Id: I26bc1eceefd2c588d73b921865ab70e4645ade57
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Kernel-originated IP packets that have no user socket associated
with them (e.g., ICMP errors and echo replies, TCP RSTs, etc.)
are emitted with a mark of zero. Add a sysctl to make them have
the same mark as the packet they are replying to.
This allows an administrator that wishes to do so to use
mark-based routing, firewalling, etc. for these replies by
marking the original packets inbound.
Tested using user-mode linux:
- ICMP/ICMPv6 echo replies and errors.
- TCP RST packets (IPv4 and IPv6).
Change-Id: I6873d973196797bcf32e2e91976df647c7e8b85a
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Currently, IPv6 router discovery always puts routes into
RT6_TABLE_MAIN. This causes problems for connection managers
that want to support multiple simultaneous network connections
and want control over which one is used by default (e.g., wifi
and wired).
To work around this connection managers typically take the routes
they prefer and copy them to static routes with low metrics in
the main table. This puts the burden on the connection manager
to watch netlink to see if the routes have changed, delete the
routes when their lifetime expires, etc.
Instead, this patch adds a per-interface sysctl to have the
kernel put autoconf routes into different tables. This allows
each interface to have its own autoconf table, and choosing the
default interface (or using different interfaces at the same
time for different types of traffic) can be done using
appropriate ip rules.
The sysctl behaves as follows:
- = 0: default. Put routes into RT6_TABLE_MAIN as before.
- > 0: manual. Put routes into the specified table.
- < 0: automatic. Add the absolute value of the sysctl to the
device's ifindex, and use that table.
The automatic mode is most useful in conjunction with
net.ipv6.conf.default.accept_ra_rt_table. A connection manager
or distribution could set it to, say, -100 on boot, and
thereafter just use IP rules.
Change-Id: I82d16e3737d9cdfa6489e649e247894d0d60cbb1
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
keyreset now registers a keycombo driver that acts as the old
keyreset driver acted.
Change-Id: I08f5279e3a33b267571b699697f9f54508868983
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Keycombo lets you provide a key up and key down function, and an
optional time delay for key down. The driver will call the key
down function after the specified key combo has been held for the
speicified time delay. After you release the combo, if the key down
has happened, it calls key up.
Change-Id: I6a9a94e96a8f58fadd908fd1dc7944b9102a089f
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Integrate several new definitions (not code) that
add additional hid mappings from the HID HUT 1.12
and approved additional requests.
Additions are taken from the commits in the
linux-input upstream: f362e69, 2a4d815, 3b5a7ab,
358f247, 701ba53, d09bbfd, af8036d, 5820e4d, a443255
Change-Id: Id0e1cff5828062009b4f94c987ac91f88f14652e
Signed-off-by: Mathieu Meisser <mmeisser@logitech.com>
Signed-off-by: Olivier Gay <ogay@logitech.com>
commit 118b230225 upstream.
dynamic_dname() is both too much and too little for those - the
output may be well in excess of 64 bytes dynamic_dname() assumes
to be enough (thanks to ashmem feeding really long names to
shmem_file_setup()) and vsnprintf() is an overkill for those
guys.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Colin Cross <ccross@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change-Id: I70970c6125f377048664eb5bde08f3fae29aa348
Second argument is similar to PR_SET_TIMERSLACK, if non-zero then the
slack is set to that value otherwise sets it to the default for the thread.
Takes PID of the thread as the third argument.
This allows power/performance management software to set timer slack for
other threads according to its policy for the thread (such as when the
thread is designated foreground vs. background activity)
Change-Id: I744d451ff4e60dae69f38f53948ff36c51c14a3f
Signed-off-by: Ruchi Kandoi <kandoiruchi@google.com>
Quirks specify common behaviors that vary slightly among devices, and
which ADF must account for.
The buffer padding quirk captures the way different devices fetch the
last scanline in a buffer: some devices fetch an entire line (including
padding to the pitch) while others only fetch up to the visible width.
ADF's buffer size validation now takes this quirk into account.
Change-Id: I828b13316e27621d8a9efd9d5fffa6ce12a525ff
Signed-off-by: Greg Hackmann <ghackmann@google.com>
The net_device used by ipv6_chk_addr is const in some users so add a
const here, fixing a warning following mainline commit 6bc19fb82d
(Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net) from
David S. Miller.
Change-Id: Iebfae34fc9f10f958c41aad6ac4008d61668a870
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Sherman Yin <syin@broadcom.com>
[Folded in additional const fix to the dummy function from Sherman Yin]
Signed-off-by: John Stultz <john.stultz@linaro.org>
The old logic assumes CMDLINE_FROM_BOOTLOADER vs. CMDLINE_FORCE and
ignores CMDLINE_EXTEND. Here's the old logic:
- CONFIG_CMDLINE_FORCE=true
CONFIG_CMDLINE
- dt bootargs=non-empty:
dt bootargs
- dt bootargs=empty, @data is non-empty string
@data is left unchanged
- dt bootargs=empty, @data is empty string
CONFIG_CMDLINE (or "" if that's not defined)
The new logic is now documented in of_fdt.h and is copied here for
reference:
- CONFIG_CMDLINE_FORCE=true
CONFIG_CMDLINE
- CONFIG_CMDLINE_EXTEND=true, @data is non-empty string
@data + dt bootargs (even if dt bootargs are empty)
- CONFIG_CMDLINE_EXTEND=true, @data is empty string
CONFIG_CMDLINE + dt bootargs (even if dt bootargs are empty)
- CMDLINE_FROM_BOOTLOADER=true, dt bootargs=non-empty:
dt bootargs
- CMDLINE_FROM_BOOTLOADER=true, dt bootargs=empty, @data is non-empty string
@data is left unchanged
- CMDLINE_FROM_BOOTLOADER=true, dt bootargs=empty, @data is empty string
CONFIG_CMDLINE (or "" if that's not defined)
Signed-off-by: Doug Anderson <dianders@chromium.org>
CC: devicetree-discuss@lists.ozlabs.org
CC: Grant Likely <grant.likely@secretlab.ca>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Rob Herring <rob.herring@calxeda.com>
Change-Id: I40ace250847f813358125dfcaa8998fd32cf7ea3
Signed-off-by: Colin Cross <ccross@android.com>
64-bit types in structs create alignment problems when a 32-bit x86
userspace talks to an x86_64 kernel. In most cases the 64-bit types can
be replaced with 32-bit ones, since they're being used for fds and
should have been __s32 in the first place. For adf_vsync_event,
alignment can be enforced by making the timestamp an __aligned_u64.
Change-Id: I87cf73d8f57730bd7bb43ffce6b7b411eb0ff198
Signed-off-by: Greg Hackmann <ghackmann@google.com>
A device's fb_info is shared between clients. fb_release() is called
when each client is released, not just the last one. Since the fbdev
helper needs to release its dma-buf when the last client goes away, it
must keep its own reference count.
fbmem and fbcon hold different locks while calling fb_release(), so
explicit locking is needed.
Change-Id: I42cd659f7633adba7c11f407d4b594bd43305d6a
Signed-off-by: Greg Hackmann <ghackmann@google.com>
This reverts Serban's out-of-tree binder changes and moves to
the new binder protocol approach merged into AOSP.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Add API log_wakeup_reason() and expose it to userspace via sysfs path
/sys/kernel/wakeup_reasons/last_resume_reason
Change-Id: I81addaf420f1338255c5d0638b0d244a99d777d1
Signed-off-by: Ruchi Kandoi <kandoiruchi@google.com>
get_governor_parent_kobj() can be used by any governor, generic
cpufreq governors or platform specific ones and so must be present in
cpufreq.c instead of cpufreq_governor.c.
This patch moves it to cpufreq.c. This also adds
EXPORT_SYMBOL_GPL(get_governor_parent_kobj) so that modules can use
this function too.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The default initial rwnd is hardcoded to 10.
Now we allow it to be controlled via
/proc/sys/net/ipv4/tcp_default_init_rwnd
which limits the values from 3 to 100
This is somewhat needed because ipv6 routes are
autoconfigured by the kernel.
See "An Argument for Increasing TCP's Initial Congestion Window"
in https://developers.google.com/speed/articles/tcp_initcwnd_paper.pdf
Change-Id: I386b2a9d62de0ebe05c1ebe1b4bd91b314af5c54
Signed-off-by: JP Abgrall <jpa@google.com>
Conflicts:
net/ipv4/sysctl_net_ipv4.c
net/ipv4/tcp_input.c
[net-next commit 6d0bfe2261]
This adds the ability to send ICMPv6 echo requests without a
raw socket. The equivalent ability for ICMPv4 was added in
2011.
Instead of having separate code paths for IPv4 and IPv6, make
most of the code in net/ipv4/ping.c dual-stack and only add a
few IPv6-specific bits (like the protocol definition) to a new
net/ipv6/ping.c. Hopefully this will reduce divergence and/or
duplication of bugs in the future.
Caveats:
- Setting options via ancillary data (e.g., using IPV6_PKTINFO
to specify the outgoing interface) is not yet supported.
- There are no separate security settings for IPv4 and IPv6;
everything is controlled by /proc/net/ipv4/ping_group_range.
- The proc interface does not yet display IPv6 ping sockets
properly.
Tested with a patched copy of ping6 and using raw socket calls.
Compiles and works with all of CONFIG_IPV6={n,m,y}.
Bug: 12800827
Change-Id: I718cd9931823873ab44df22e8a66e12d6a0a6eb1
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Device-custom ADF ioctls can use type ADF_IOCTL_TYPE and
nr >= ADF_IOCTL_NR_CUSTOM
Change-Id: Ia8270973df5100e996ca0e021ede60e54b9af72a
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Drop EPOLLWAKEUP from epoll events mask if CONFIG_PM_SLEEP is disabled.
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Userspace-facing ADF_MAX_ATTACHMENTS must be in terms of
userspace-facing struct adf_attachment_config
Change-Id: Iaaddcd6366f13b3e52eb3911efcfff8a61e0b225
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Systems may define PAGE_SIZE in userspace limits.h but don't have to.
PAGE_SIZE was picked as an arbitrary "reasonable" limit so just use 4096
instead.
Change-Id: I9555e39aba64a3a70f61eb6ded2a4129ab236ce0
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Move the entire contents of the linux/if_pppolac.h and
linux/if_pppopns.h headers to uapi, they only contain userspace
interfaces.
Change-Id: I3cfed7f2ae400b53269a1f59144aa3dbc30ae0b5
Signed-off-by: Colin Cross <ccross@android.com>
Move the entire contents of linux/usb/f_accessory.h header to uapi,
it only contains a userspace interface.
Change-Id: Ieb5547da449588ae554988a201c0e6b4e3afc531
Signed-off-by: Colin Cross <ccross@android.com>
Move the most of linux/usb/f_mtp.h header to uapi. Move the only
remaining structure definition into f_mtp.c, the only place that
uses it.
Change-Id: I952c1a9dc15c36bf295a0eb4d74b6b1ad912ed03
Signed-off-by: Colin Cross <ccross@android.com>
Move the entire contents of linux/keychord.h header to uapi, it only
contains a userspace interface.
Change-Id: If94f83328b19efb58c66391dce3bd8e927788d8d
Signed-off-by: Colin Cross <ccross@android.com>
Move ion from drivers/gpu/ion to drivers/android/staging/ion.
Change-Id: Id6e996aa3954cbb8e1a8abc9578a56204f5eb211
Signed-off-by: Colin Cross <ccross@android.com>
Turn ion_user_handle_t to int. This change reflects the underlying type
returned by the ion driver.
Change-Id: I40390dae8138327769510525bf62e55877a4b37d
Signed-off-by: Rom Lemarchand <romlem@google.com>
Many custom formats look a lot like the standard ones, but with
different subsampling, bpp, etc. Expose and document
adf_buffer_validate()'s main body, so drivers can reuse its logic when
validating these formats.
Change-Id: I1d06981c9e5aab26f3ab2956c08c679f2c823bcc
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Declare new ion_user_handle_t type to contain the token returned to user-space.
This allows a 2-step migration of the user-space code to a new kernel header
first, then will allow us to change the definition of the ion_user_handle_type_t
to int without breaking the API.
Change-Id: I4200b6600df8e56fe98cf1580a13a65cb25ec646
Signed-off-by: Rom Lemarchand <romlem@google.com>
(cherry picked from commit ebb8269bbb05b06ecedca3e21b3e65f23d48eadd)
Informational flags don't affect ADF directly but may be useful to
clients. Currently used to indicate primary and external displays.
Change-Id: I343c7f0148da0869244c8e818350e9855525df85
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Simple buffers are linear RGB buffers analogous to KMS's dumb buffers.
Simple buffers can be allocated and posted to a display interface
without any driver-private data.
Internally, ADF drivers provide the driver-private data needed (if any)
to post a simple buffer to the display.
Change-Id: Ib0b737622eaf343111310f6623f99d69cf3807d2
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Provides a dma-buf exporter for memblocks, mainly useful for ADF devices
to wrap their bootloader logos
Change-Id: I936a9b5df099ab6084d433fcaf50f3bc29f93289
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Userspace processes often have multiple allocators that each do
anonymous mmaps to get memory. When examining memory usage of
individual processes or systems as a whole, it is useful to be
able to break down the various heaps that were allocated by
each layer and examine their size, RSS, and physical memory
usage.
This patch adds a user pointer to the shared union in
vm_area_struct that points to a null terminated string inside
the user process containing a name for the vma. vmas that
point to the same address will be merged, but vmas that
point to equivalent strings at different addresses will
not be merged.
Userspace can set the name for a region of memory by calling
prctl(PR_SET_VMA, PR_SET_VMA_ANON_NAME, start, len, (unsigned long)name);
Setting the name to NULL clears it.
The names of named anonymous vmas are shown in /proc/pid/maps
as [anon:<name>] and in /proc/pid/smaps in a new "Name" field
that is only present for named vmas. If the userspace pointer
is no longer valid all or part of the name will be replaced
with "<fault>".
The idea to store a userspace pointer to reduce the complexity
within mm (at the expense of the complexity of reading
/proc/pid/mem) came from Dave Hansen. This results in no
runtime overhead in the mm subsystem other than comparing
the anon_name pointers when considering vma merging. The pointer
is stored in a union with fieds that are only used on file-backed
mappings, so it does not increase memory usage.
Change-Id: Ie2ffc0967d4ffe7ee4c70781313c7b00cf7e3092
Signed-off-by: Colin Cross <ccross@android.com>
