Parse the Display Parameters Data Block (tag 0x21) defined in
DisplayID v2.1a Section 4.2.6. Extract the Display Device Technology
field from the color depth and device technology byte, which indicates
whether the panel uses LCD or OLED technology.
Add a panel_type field to struct drm_display_info and populate it
during DisplayID iteration so downstream drivers can use it for
panel-type-dependent behavior. Add DRM_MODE_PANEL_TYPE_LCD to the UAPI
panel type property alongside the existing OLED value.
Assisted-by: Copilot:Claude-Opus-4.6
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260526030254.1460480-3-chen-yu.chen@amd.com
Signed-off-by: Mario Limonciello <superm1@kernel.org>
sysfb
- drm/sysfb truncation and alignment fixes.
edid:
- fix edid OOB read in tile parsing
- increase displayid topology id to correct size.
nouveau:
- fix error handling paths in nouveau
amdxdna:
- get_bo_info fix.
ivpu:
- fix leak when error handling in ivpu.
-----BEGIN PGP SIGNATURE-----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=eLQl
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2026-06-27' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"These are just the fixes from our fixes branch, all pretty small and
scattered.
sysfb:
- drm/sysfb truncation and alignment fixes
edid:
- fix edid OOB read in tile parsing
- increase displayid topology id to correct size
nouveau:
- fix error handling paths in nouveau
amdxdna:
- get_bo_info fix
ivpu:
- fix leak when error handling in ivpu"
* tag 'drm-fixes-2026-06-27' of https://gitlab.freedesktop.org/drm/kernel:
drm/sysfb: Avoid truncating maximum stride
drm/sysfb: Return errno code from drm_sysfb_get_visible_size()
drm/sysfb: Avoid possible truncation with calculating visible size
drm/sysfb: Do not page-align visible size of the framebuffer
drm/edid: fix OOB read in drm_parse_tiled_block()
drm/nouveau: fix reversed error cleanup order in ucopy functions
drm/nouveau/acr: fix missing nvkm_done() in error path of nvkm_acr_oneinit()
accel/amdxdna: Use caller client for debug BO sync
drm/displayid: fix Tiled Display Topology ID size
accel/ivpu: fix HWS command queue leak on registration failure
Add a new mode matching flag DRM_MODE_MATCH_TIMINGS_VRR. This is
identical to DRM_MODE_MATCH_TIMINGS, except it requires the vsync
pulse to remain anchored to the end of vtotal, as opposed to the
start of the frame. VRR capable hardware can therefore treat
matching modes as just variants of the same mode with a different
vblank lengths.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260622213602.7244-3-ville.syrjala@linux.intel.com
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Replace the gem-vram memory manager with gem-shmem. Makes the driver more
robust and enables dma-buf sharing with other hardware.
Gem-vram was created from various drivers that used TTM for their memory
management. All these drivers have meanwhile been converted to gem-shmem.
Using gem-vram is deprecated because it has several problems.
* TTM requires significant overcommitment of video memory for reliable
page flips. There needs to be 3 times the size of the largest possible
framebuffer available or page flips can fail. This leaves the display
dark without further warning. Hibmc hardware with 32 MiB and a maximum
framebuffer size of 1920x2000 is at the limit.
* No dma-buf sharing without GTT support. Neither gem-vram nor hibmc
hardware support a GTT address space. This is required to share buffers
with other devices via dma-buf interfaces.
* TTM requires hardware-accelerated rendering into video memory for
optimal results. As hibmc hardware cannot do this, hibmc renders in
system memory and copies the result to video memory. This can be more
effectively implemented with gem-shmem and DRM's shadow-plane helpers.
Converting hibmc to gem-shmem and shadow-plane helpers.
* Replace gem-vram entry points in struct drm_driver with gem-shmem
equivalents. This makes the driver allocate struct drm_gem_shmem_object
for its buffers.
* Use DRM_GEM_SHADOW_*_PLANE for its plane funcs and plane-helper
funcs. The shadow-plane helpers map a plane's gem buffer objects into
kernel address space during a page flip, so that atomic_update can
copy them to video memory.
* Handle framebuffer damage in hibmc_plane_atomic_update(). This updates
video memory from the plane's framebuffer. It automatically synchronizes
shared buffers with other devices. Create the framebuffer with
drm_gem_fb_create_with_dirty() to trigger the update on each page flip.
* Initialize the plane with drm_plane_enable_fb_damage_clips() to limit
the damage updates to the framebuffer areas that changed. We don't want
to do a full-buffer memcpy if only a small area has changed.
* Test display modes against the available video memory in
hibmc_mode_config_mode_valid(). We only want to announce display modes
that fit into display memory.
* Map the display memory itself into kernel address space.
* Do not set drm_mode_config.prefer_shadow. This would advise user space
to install a shadow buffer. But with gem-shmem, the gem buffer object
already acts as a shadow buffer for video memory.
We use these patterns in many other drivers with similar limitation as
hibmc and its hardware. With these changes in place, hibmc is more robust
and better integrated into the overall DRM framework.
v3:
- fix coding style
v2:
- do not select TTM symbols
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Yongbang Shi <shiyongbang@huawei.com>
Link: https://patch.msgid.link/20260618123142.92298-7-tzimmermann@suse.de
Define macros used for decoding DSC max bpp delta values
from the sink DPCD. This includes per-format masks for
RGB/YCbCr444 and YCbCr420, as well as definitions for delta
scaling and the YCbCr420 bit shift. Also add version_1 as
suffix to MAX_DELTA_BPP.
v2: Move constants under 0x6E register. [Ankit]
Add mask for Native 422 also. [Ankit]
v3: Rename _DSC_NATIVE4222 to _DSC_NATIVE_YCbCr422. [Ankit]
v4: Move Version_1 edit ti patch_1. [Ankit]
Add shift mask for native also. [sashiko]
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260623094236.1586318-4-nemesa.garg@intel.com
Rename DP_DSC_RGB_YCbCr420_MAX_BPP_DELTA_MASK to
DP_DSC_NATIVE_YCbCr420_MAX_BPP_DELTA_MASK to align with
the DP DSC specification, where the field represents the
native YCbCr 4:2:0 format.
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260623094236.1586318-3-nemesa.garg@intel.com
The dsc max bpp delta masks were incorrectly placed
under the DP_DSC_BITS_PER_PIXEL_INC(0x06F) register.
Move these under correct DP_DSC_MAX_BPP_DELTA(0x06E)
register.
v2: Separate patch for correcting register. [Ankit]
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260623094236.1586318-2-nemesa.garg@intel.com
Store tiling function pointer in struct intel_panic instead of struct
intel_framebuffer, and store struct intel_panic pointer instead of
struct intel_framebuffer pointer in struct drm_scanout_buffer private
member.
To make this happen, pass the tiling function pointer to panic setup
hook, and initialize sb->private in the hook for clarity.
This allows us to drop the dependency on struct intel_framebuffer from
i915 and xe panic code.
Note: It would be less verbose to have a typedef for the tiling function
pointer. However, there isn't a nice location for it that wouldn't also
increase header interdependencies.
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/d97abae79db3437c617cd4cb6193ba017b3a8d78.1780394867.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
There are no remaining users of the atomic_reset hook. Remove it
from the core.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-78-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
All drivers have been converted to the atomic_create_state callback
and its drm_atomic_helper_bridge_create_state() helper.
Remove the deprecated drm_atomic_helper_bridge_reset().
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-74-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The drm_atomic_helper_bridge_reset() helper is deprecated in favour
of the new atomic_create_state callback.
Add drm_atomic_helper_bridge_create_state() as the counterpart helper
for this new callback, and make drm_atomic_helper_bridge_reset() call
this new helper.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-7-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Commit 47b5ac7daa ("drm/atomic: Add new atomic_create_state callback
to drm_private_obj") introduced a new pattern for allocating drm object
states: atomic_create_state, a dedicated hook that allocates and
initializes a pristine state without any side effect.
The bridge atomic_reset callback is already fallible and in practice
only allocates and initializes state without touching hardware.
However, the reset name does not make this contract clear: callers
and implementers cannot tell from the name alone whether the hardware
will be affected or when the hook is safe to call.
Add an atomic_create_state callback to drm_bridge_funcs to make the
contract explicit: allocate a pristine state, initialize it, no side
effects. The core calls it when available, falling back to
atomic_reset otherwise.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-6-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The convention for state init helpers is to pass the state pointer
as the first argument and the object pointer second.
__drm_atomic_helper_bridge_state_init() has them in the opposite
order. Swap the arguments to follow the convention, and update the
cdns-mhdp8546 caller.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-4-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
__drm_atomic_helper_bridge_reset() is used to initialize a
newly allocated drm_bridge_state, and is being typically called by the
drm_bridge_funcs.atomic_reset implementation.
Since we want to consolidate DRM objects state allocation around the
atomic_create_state callback that will only allocate and initialize a
new drm_bridge_state instance, we will need to call
__drm_atomic_helper_bridge_reset() from both the atomic_reset and
atomic_create_state hooks.
To avoid any confusion, we can thus rename
__drm_atomic_helper_bridge_reset() to
__drm_atomic_helper_bridge_state_init().
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-3-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Headers under include/ aren't supposed to try to include headers from
driver directories, such as i915_reg_defs.h. Remove it.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/20260615152837.1898991-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The Tiled Display Topology ID of a DisplayID Tiled Display Topology Data
Block consists of three fields:
- Tiled Display Manufacturer/Vendor ID Field (3 bytes)
- Tiled Display Product ID Code Field (2 bytes)
- Tiled Display Serial Number Field (4 bytes)
i.e. a total of 9 bytes, not 8.
The DisplayID Tiled Display Topology ID is used as the tile group
identifier.
Update both struct displayid_tiled_block topology_id member and struct
drm_tile_group group_data member to full 9 bytes.
The group data was missing the last byte of the serial number. I don't
know whether there are known bug reports that might be linked to this,
but it's plausible the last byte could be the differentiating part for
the tile groups, and fewer tile groups might have been created than
intended.
Fixes: b49b55bd4f ("drm/displayid: add displayid defines and edid extension (v2)")
Fixes: 138f9ebb97 ("drm: add tile_group support. (v3)")
Cc: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org # v3.19+
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260610141549.555605-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
As we do for CRTC color mgmt properties, use color_mgmt_changed flag to
track any value changes in the color pipeline of a given plane, so that
drivers can update color blocks as soon as plane color pipeline or
individual colorop values change. Since we're here, only announce and
track changes to plane COLOR_PIPELINE prop if its value is actually
changing.
Fixes: 8c5ea1745f ("drm/colorop: Add BYPASS property")
Fixes: 7fa3ee8c0a ("drm/colorop: Define LUT_1D interpolation")
Fixes: 41651f9d42 ("drm/colorop: Add 1D Curve subtype")
Fixes: 3410108037 ("drm/colorop: Add multiplier type")
Fixes: db971856bb ("drm/colorop: Add 3D LUT support to color pipeline")
Fixes: e5719e7f19 ("drm/colorop: Add 3x4 CTM type")
Fixes: 99a4e4f08a ("drm/colorop: Add 1D Curve Custom LUT type")
Fixes: 2afc3184f3 ("drm/plane: Add COLOR PIPELINE property")
Reviewed-by: Harry Wentland <harry.wentland@amd.com> #v1
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Fixes: 9ba25915ef ("drm/amd/display: Add support for sRGB EOTF in DEGAM block")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patch.msgid.link/20260609110420.1298352-4-mwen@igalia.com
As interpolation props are actually mutable props, any changes should be
handled by drm_colorop_state. Move their enum and make it correctly
behaves as mutable.
Fixes: 7fa3ee8c0a ("drm/colorop: Define LUT_1D interpolation")
Fixes: db971856bb ("drm/colorop: Add 3D LUT support to color pipeline")
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Fixes: 9ba25915ef ("drm/amd/display: Add support for sRGB EOTF in DEGAM block")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patch.msgid.link/20260609110420.1298352-3-mwen@igalia.com
The lut1d_interpolation and lut3d_interpolation fields and their
associated properties were marked as read-only, but userspace
can set them via drm_atomic_colorop_set_property().
Fixes: 7fa3ee8c0a ("drm/colorop: Define LUT_1D interpolation")
Fixes: db971856bb ("drm/colorop: Add 3D LUT support to color pipeline")
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Fixes: 9ba25915ef ("drm/amd/display: Add support for sRGB EOTF in DEGAM block")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patch.msgid.link/20260609110420.1298352-2-mwen@igalia.com
The drm_bridge_funcs atomic_get_output_bus_fmts operation should be the
same for likely every HDMI connector bridge, unless such an HDMI
connector bridge has some special hardware restrictions that I cannot
envision yet.
To avoid code duplication and standardize on a set of media bus formats
that the HDMI output color formats translate to, add a common helper
function that implements this operation to the drm bridge helpers.
The function returns a list of output bus formats based on the HDMI
bridge's current output bits-per-component, and its bitmask of supported
color formats.
To guard against future expansion of DRM_OUTPUT_COLOR_FORMAT outgrowing
the hweight8 call, add a BUILD_BUG_ON statement where it's used that
checks for DRM_OUTPUT_COLOR_FORMAT_COUNT. The justification for not
using hweight32 in all cases is that not all ISAs have a popcount
instruction, and will benefit from a smaller/faster software
implementation that doesn't have to operate across all bits.
The justification for not defining an hweight_color depending on the
value of DRM_OUTPUT_COLOR_FORMAT_COUNT is that this count enum value is
only known at compile time, not at preprocessor time.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20260609-color-format-v17-7-35739b5782cc@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Add a function to get the connector color format from a connector state,
and a new function pointer in drm_connector_funcs to allow connectors to
override what connector color format it returns.
This is useful for the bridge chain recursive bus format selection code,
which does not wish to implement connector implementation specific
checks like whether it involves HDMI.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20260609-color-format-v17-4-35739b5782cc@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Add a new general DRM property named "color format" which can be used by
userspace to request the display driver to output a particular color
format.
Possible string values for the new enum property are:
- "AUTO" (setup by default, driver internally picks the color format)
- "RGB"
- "YUV 4:4:4"
- "YUV 4:2:2"
- "YUV 4:2:0"
Drivers should advertise from this list the formats they support in an
optimistic best-case scenario. EDID data from the sink can then be used
in the kernel's atomic check phase to restrict this set of formats, as
well as by userspace to make a correct choice in the first place.
Co-developed-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Co-developed-by: Andri Yngvason <andri@yngvason.is>
Signed-off-by: Andri Yngvason <andri@yngvason.is>
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20260609-color-format-v17-3-35739b5782cc@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Currently almost all bridge drivers which implement hpd_enable /
hpd_disable callbacks simply toggle the hardware registers generating
the interrupt. However, as pointed out by Jonas Karlman and Sashiko bot,
using those callbacks for enable_irq() / disable_irq() calls or
scheduling and cancelling the work can cause a AB-BA deadlock (between
hpd_mutex lock and the corresponding lock).
Split the hpd_mutex into two locks: one simply making sure that hpd_cb /
hpd_data are consistent and another one, hpd_state_mutex, making sure
that concurrent drm_bridge_hpd_enable() / drm_bridge_hpd_disable() calls
can't end up with inconsistency between hpd_cb/_data and bridge's
internal state.
Link: https://lore.kernel.org/dri-devel/9aa4bd35-bff6-4009-a959-ce31010c7b35@kwiboo.se
Link: https://sashiko.dev/#/patchset/20260513-dp-connector-hpd-v2-0-42f757bfcbf9%40oss.qualcomm.com
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260528-dp-connector-hpd-v3-1-d656eb1079b7@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The MIPI DSI v1.3 spec defines two modes for transporting compressed
pixel data: one slice per packet or multiple slice widths in a single
packet (Section 8.8.24 Figure 40).
Add a MIPI_DSI_MODE_DSC_ALL_SLICES_IN_PKT flag that panel drivers can
set to indicate that all DSC slices for a line should be packed into a
single packet. When unset should default to 1 slice per packet.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Tested-by: Junjie Cao <junjie.cao@linux.dev>
Acked-by: Maxime Ripard <mripard@kernel.org> # from v1
Link: https://patch.msgid.link/20260318-dsi-dsc-slice-per-pkt-v2-1-0a1b316f8250@pm.me
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
- Driver Core (shared via signed tag dd-lifetimes-7.2-rc1):
- Introduce Higher-Ranked Lifetime Types (HRT) for Rust device
drivers, allowing driver structs to hold device resources like
pci::Bar and IoMem directly with a lifetime tied to the binding
scope, removing the need for Devres indirection and ARef<Device>.
- Replace drvdata() with scoped registration data on the auxiliary
bus, using the new ForLt trait to thread lifetimes through
registrations. Remove drvdata() and driver_type.
- DRM:
- Add GPUVM immediate mode abstraction for Rust GPU drivers:
- In immediate mode, GPU virtual address space state is updated
during job execution (in the DMA fence signalling critical path),
keeping the GPUVM and the GPU's address space always in sync.
- Provide GpuVm, GpuVa, and GpuVmBo types for managing address
spaces, virtual mappings, and GEM object backing respectively.
- Provide split-merge map/unmap operations that handle partial
overlaps with existing mappings.
- drm_exec integration for dma_resv locking and GEM object
validation based on the external/evicted object lists are not
yet covered and planned as follow-up work.
- Introduce DeviceContext type state for drm::Device, allowing
drivers to restrict operations to contexts where the device is
guaranteed to be registered (or not yet registered) with userspace.
- Add FEAT_RENDER flag to the Driver trait for render node support.
- Nova:
- Hopper/Blackwell enablement:
- Add GPU identification and architecture-based HAL selection for
Hopper (GH100) and Blackwell (GB100, GB202).
- Implement the FSP (Foundation Security Processor) boot path used by
Hopper and Blackwell, including FSP falcon engine support, EMEM
operations, MCTP/NVDM message infrastructure, and FSP Chain of
Trust boot with GSP lockdown release.
- Add support for 32-bit firmware images and auto-detection of
firmware image format.
- Add architecture-specific framebuffer, sysmem flush, PCI config
mirror, DMA mask, and WPR/non-WPR heap sizing.
- GSP boot and unload:
- Refactor the GSP boot process into a chipset-specific HAL,
keeping the SEC2 and FSP boot paths separated cleanly.
- Implement proper driver unload: send UNLOADING_GUEST_DRIVER
command, run Booter Unloader and FWSEC-SB upon unbinding, and run
the unload bundle on Gsp::boot() failure. This removes the need
for a manual GPU reset between driver unbind and re-probe.
- GA100 support:
- Add support for the GA100 GPU, including IFR header detection and
skipping, correct fwsignature selection, conditional FRTS boot,
and documentation of the IFR header layout.
- VBIOS hardening and refactoring:
- Harden VBIOS parsing with checked arithmetic, bounds-checked
accesses, and FromBytes-based structure reads throughout the FWSEC
and Falcon data paths. Simplify the overall VBIOS module
structure.
- HRT adoption:
- Use lifetime-parameterized pci::Bar directly, replacing the
Arc<Devres<Bar0>> indirection. Replace ARef<Device> with &'bound
Device in SysmemFlush and the GSP sequencer. Separate the driver
type from driver data.
- Misc:
- Rename module names to kebab-case (nova-drm, nova-core).
- Require little-endian in Kconfig, making the existing assumption
explicit.
- Tyr:
- Define comprehensive typed register blocks for GPU_CONTROL,
JOB_CONTROL, MMU_CONTROL (including per-address-space registers),
and DOORBELL_BLOCK using the kernel register!() macro. This replaces
manual bit manipulation with typed register and field accessors.
- Add shmem-backed GEM objects and set DMA mask based on GPU physical
address width.
- Adopt HRT: separate driver type from driver data, and use IoMem
directly instead of Devres for register access during probe.
- Move clock cleanup into a Drop implementation.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaiHGcwAKCRBFlHeO1qrK
LucmAQCnRhpHwT9Miq3y29lyJjm0OcxikeBmeVczx3o+pUWI6wD+IHQMk26MEpqa
T/XmMDbY+cFjRpeVu7qRAKa28649FgM=
=eLXf
-----END PGP SIGNATURE-----
Merge tag 'drm-rust-next-2026-06-04' of https://gitlab.freedesktop.org/drm/rust/kernel into drm-next
DRM Rust changes for v7.2-rc1
- Driver Core (shared via signed tag dd-lifetimes-7.2-rc1):
- Introduce Higher-Ranked Lifetime Types (HRT) for Rust device
drivers, allowing driver structs to hold device resources like
pci::Bar and IoMem directly with a lifetime tied to the binding
scope, removing the need for Devres indirection and ARef<Device>.
- Replace drvdata() with scoped registration data on the auxiliary
bus, using the new ForLt trait to thread lifetimes through
registrations. Remove drvdata() and driver_type.
- DRM:
- Add GPUVM immediate mode abstraction for Rust GPU drivers:
- In immediate mode, GPU virtual address space state is updated
during job execution (in the DMA fence signalling critical path),
keeping the GPUVM and the GPU's address space always in sync.
- Provide GpuVm, GpuVa, and GpuVmBo types for managing address
spaces, virtual mappings, and GEM object backing respectively.
- Provide split-merge map/unmap operations that handle partial
overlaps with existing mappings.
- drm_exec integration for dma_resv locking and GEM object
validation based on the external/evicted object lists are not
yet covered and planned as follow-up work.
- Introduce DeviceContext type state for drm::Device, allowing
drivers to restrict operations to contexts where the device is
guaranteed to be registered (or not yet registered) with userspace.
- Add FEAT_RENDER flag to the Driver trait for render node support.
- Nova:
- Hopper/Blackwell enablement:
- Add GPU identification and architecture-based HAL selection for
Hopper (GH100) and Blackwell (GB100, GB202).
- Implement the FSP (Foundation Security Processor) boot path used by
Hopper and Blackwell, including FSP falcon engine support, EMEM
operations, MCTP/NVDM message infrastructure, and FSP Chain of
Trust boot with GSP lockdown release.
- Add support for 32-bit firmware images and auto-detection of
firmware image format.
- Add architecture-specific framebuffer, sysmem flush, PCI config
mirror, DMA mask, and WPR/non-WPR heap sizing.
- GSP boot and unload:
- Refactor the GSP boot process into a chipset-specific HAL,
keeping the SEC2 and FSP boot paths separated cleanly.
- Implement proper driver unload: send UNLOADING_GUEST_DRIVER
command, run Booter Unloader and FWSEC-SB upon unbinding, and run
the unload bundle on Gsp::boot() failure. This removes the need
for a manual GPU reset between driver unbind and re-probe.
- GA100 support:
- Add support for the GA100 GPU, including IFR header detection and
skipping, correct fwsignature selection, conditional FRTS boot,
and documentation of the IFR header layout.
- VBIOS hardening and refactoring:
- Harden VBIOS parsing with checked arithmetic, bounds-checked
accesses, and FromBytes-based structure reads throughout the FWSEC
and Falcon data paths. Simplify the overall VBIOS module
structure.
- HRT adoption:
- Use lifetime-parameterized pci::Bar directly, replacing the
Arc<Devres<Bar0>> indirection. Replace ARef<Device> with &'bound
Device in SysmemFlush and the GSP sequencer. Separate the driver
type from driver data.
- Misc:
- Rename module names to kebab-case (nova-drm, nova-core).
- Require little-endian in Kconfig, making the existing assumption
explicit.
- Tyr:
- Define comprehensive typed register blocks for GPU_CONTROL,
JOB_CONTROL, MMU_CONTROL (including per-address-space registers),
and DOORBELL_BLOCK using the kernel register!() macro. This replaces
manual bit manipulation with typed register and field accessors.
- Add shmem-backed GEM objects and set DMA mask based on GPU physical
address width.
- Adopt HRT: separate driver type from driver data, and use IoMem
directly instead of Devres for register access during probe.
- Move clock cleanup into a Drop implementation.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Danilo Krummrich" <dakr@kernel.org>
Link: https://patch.msgid.link/DJ0IF39U9ETK.PCCUO7ZEQ4S0@kernel.org
Kernel-doc of drmm_add_action() references @releases which is not
on argument list. Swap '@' between 'releases' and 'action' words to fix
the documentation.
Signed-off-by: Michał Grzelak <michal.grzelak@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260522135520.1862848-3-michal.grzelak@intel.com
Setting 6th or 9th bit of drm.debug change debug logging. Meanwhile
`modinfo drm` does not inform about it at all.
Add info to MODULE_PARAM_DESC(debug, ...) about setting 6th and 9th bit
basing on DECLARE_DYNDBG_CLASSMAP(drm_debug_classes, ...). Match
description of corresponding bits with enum drm_debug_category. Include
9th bit in the example with enabling all possible logging provided at
comment at include/drm/drm_print.h.
Signed-off-by: Michał Grzelak <michal.grzelak@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260522135520.1862848-2-michal.grzelak@intel.com
Add RK3576_EDP device type entry and extend Rockchip check
to match existing hardware capabilities shared with RK3588.
Set identical maximum link rate and lane count parameters
for RK3576 eDP controller to reuse existing RK3588 config.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260601065100.1103873-11-damon.ding@rock-chips.com
The DisplayPort AUX channel gets initialized and registered during
dw_dp_bind(), but it is never unregistered, which may lead to resource
leaks and/or use-after-free.
Add the missing dw_dp_unbind() function to allow the users of the
library to handle the required cleanup, i.e. unregister the AUX adapter.
Fixes: 86eecc3a9c ("drm/bridge: synopsys: Add DW DPTX Controller support library")
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260601-drm-rk-fixes-v4-1-c3f3f123e1da@collabora.com
One of the complications of trying to use the shmem helpers to create a
scatterlist for shmem objects is that we need to be able to provide a
guarantee that the driver cannot be unbound for the lifetime of the
scatterlist.
The easiest way of handling this seems to be just hooking up an unmap
operation to devres the first time we create a scatterlist, which allows us
to still take advantage of gem shmem facilities without breaking that
guarantee. To allow for this, we extract __drm_gem_shmem_free_sgt_locked()
- which allows a caller (e.g. the rust bindings) to manually unmap the sgt
for a gem object as needed.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260529183702.677677-6-lyude@redhat.com
The DRIVER_GEM_GPUVA feature flag is currently only used to control two
behaviors within the DRM core:
- calling drm_gem_gpuva_init() during
GEM object initialization
- creating the "gpuvas" debugfs entry
drm_gem_gpuva_init() is a plain INIT_LIST_HEAD() and therefore is cheap
to run for every GEM object. The DRM_DEBUGFS_GPUVA_INFO macro is only
referenced by GPU-VA capable drivers, so clearing the feature bit does
not cause any unrelated drivers to get the "gpuvas" debugfs node. The
flag doesn't have any relevant purpose (e.g. gating ioctl handlers or MM
logic) and doesn't provide any practical benefit.
Remove the flag definition and drop it from all drivers that use it,
call drm_gem_gpuva_init() unconditionally and clear the driver features
bit in DRM_DEBUGFS_GPUVA_INFO.
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Acked-by: Rob Clark <rob.clark@oss.qualcomm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20260421084701.24227-1-laura.nao@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
drm_mode_config_reset() can be used to create the initial state, but
also to return to the initial state, when doing a suspend/resume cycle
for example.
It also affects both the software and the hardware, and drivers can
choose to reset the hardware as well. Most will just create an empty
state and the synchronisation between hardware and software states will
effectively be done when the first commit is done.
That dual role can be harmful, since some objects do need to be
initialized but also need to be preserved across a suspend/resume cycle.
drm_private_obj are such objects for example.
Thus, create another helper for drivers to call to initialize their
state when the driver is loaded, so we can make
drm_mode_config_reset() only about handling suspend/resume and similar.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260526-drm-mode-config-init-v6-16-852346394200@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Commit 47b5ac7daa ("drm/atomic: Add new atomic_create_state callback
to drm_private_obj") introduced a new pattern for allocating drm object
states.
Instead of relying on the reset() callback, it created a new
atomic_create_state hook. This is helpful because reset is a bit
overloaded: it's used to create the initial software state, reset it,
but also reset the hardware.
It can also be used either at probe time, to create the initial state
and possibly reset the hardware to an expected default, but also during
suspend/resume.
Both these cases come with different expectations too: during the
initialization, we want to initialize all states, but during
suspend/resume, drm_private_states for example are expected to be kept
around.
reset() also isn't fallible, which makes it harder to handle
initialization errors properly. This is only really relevant for some
drivers though, since all the helpers for reset only create a new
state, and don't touch the hardware at all.
It was thus decided to create a new hook that would allocate and
initialize a pristine state without any side effect:
atomic_create_state to untangle a bit some of it, and to separate the
initialization with the actual reset one might need during a
suspend/resume.
Continue the transition to the new pattern with connectors.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260526-drm-mode-config-init-v6-15-852346394200@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
__drm_atomic_helper_connector_hdmi_reset() is typically used to
initialize a newly allocated drm_connector_state when the connector is
using the HDMI helpers, and is being called by the
drm_connector_funcs.reset implementation.
Since we want to consolidate DRM objects state allocation around the
atomic_create_state callback that will only allocate and initialize a
new drm_connector_state instance, we will need to call
__drm_atomic_helper_connector_hdmi_reset() from both the reset and
atomic_create hooks.
To avoid any confusion, we can thus rename
__drm_atomic_helper_connector_hdmi_reset() to
__drm_atomic_helper_connector_hdmi_state_init().
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260526-drm-mode-config-init-v6-14-852346394200@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
__drm_atomic_helper_connector_state_reset() is used to initialize a
newly allocated drm_connector_state, and is being typically called by
the drm_connector_funcs.reset implementation.
Since we want to consolidate DRM objects state allocation around the
atomic_create_state callback that will only allocate and initialize a
new drm_connector_state instance, we will need to call
__drm_atomic_helper_connector_state_reset() from both the reset and
atomic_create hooks.
To avoid any confusion, we can thus rename
__drm_atomic_helper_connector_state_reset() to
__drm_atomic_helper_connector_state_init().
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260526-drm-mode-config-init-v6-13-852346394200@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
