Add a test to verify that the sleepable tracing prog cannot attach to a
'__x64_sys' prefix prog target.
When CONFIG_FUNCTION_ERROR_INJECTION is disabled, without the fix, the
test would trigger the BUG:
[ 3.460756] BUG: sleeping function called from invalid context at kernel/bpf/trampoline.c:1324
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260805150810.34907-3-leon.hwang@linux.dev
Add a bpf_for() benchmark modelled on bench_bpf_loop so the per-iteration
iterator cost can be measured and compared against bpf_loop. It runs an
empty bpf_for(i, 0, nr_loops) loop 1000 times per trigger and accounts
nr_loops hits per outer iteration:
$ ./bench -p 1 --nr_loops 1000 bpf-for
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260804134601.2305303-7-puranjay@kernel.org
Add an __xlated test pinning the inlined bpf_iter_num_{new,next,destroy}()
shapes. The program is __naked, so there is no compiler glue and the whole
sequence is matched instruction for instruction.
Gate it to x86_64 and arm64 (bpf_jit_needs_zext() == false); elsewhere the
verifier interleaves "wN = wN" zero-extensions that would not match. The
inlining is arch independent, so these two are enough.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260804134601.2305303-6-puranjay@kernel.org
Build xskxceiver, xdp_hw_metadata, and xdp_features from explicit source
lists instead of reusing helper objects produced by test_progs rules.
Reusing shared objects such as network_helpers.o and xsk.o can pull in
test_progs-only dependency chains and trigger unrelated libarena builds
when invoking a single target.
Keep these standalone binaries self-contained so each target builds only
its own required sources and BPF skeleton dependencies.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20260728115036.2049536-1-tushar.vyavahare@intel.com
The verifier previously accepted a task kptr after the final spin unlock
ended its RCU protection in a sleepable program. The pointer could then be
used after the task was freed.
Add a negative test for that case. Add positive controls showing that the
pointer remains valid in a non-sleepable program and while an explicit RCU
read-side section is still active.
Assisted-by: Codex:gpt-5.6-sol
Assisted-by: ChatGPT:GPT-5.6-Pro
Signed-off-by: Ning Ding <dingning04@gmail.com>
Link: https://lore.kernel.org/bpf/20260803112615.3362122-3-dingning04@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Add kfunc scalar argument types, classify them in get_kfunc_arg_type()
along side with pointer arguments and move scalar type verification
into the main switch in check_kfunc_args(). This keeps BTF-based
classification separate from register validation for every argument,
paving the way for generating the kfunc argument prototype at add-call
time. No functional change intended.
KF_ARG_MEM_SIZE and KF_ARG_CONST_MEM_SIZE now are reachable. Therefore,
remove the fallthrough from KF_ARG_PTR_TO_MEM case and adjust the
register indexing.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260801074633.1595644-18-ameryhung@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
get_kfunc_ptr_arg_type() decided part of a kfunc pointer argument's type
from the caller's register: a PTR_TO_BTF_ID (or reg2btf_ids) register made
the argument KF_ARG_PTR_TO_BTF_ID, otherwise it fell through to a memory
buffer. Folding register state into argument classification prevents
describing a kfunc's arguments from its BTF alone, which is a prerequisite
for generating a helper-like prototype and eventually sharing the argument
checking (check_func_arg()) between helpers and kfuncs.
Classify pointer arguments from BTF only, and resolve them against the
register in check_kfunc_args():
- A pointer to a struct that is not paired with a __sz/__szk size
argument is classified KF_ARG_PTR_TO_BTF_ID and then checked against
the register. A register carrying a BTF ID (PTR_TO_BTF_ID or a
reg2btf_ids type) must be referenced or trusted and is matched against
the expected type. The only relaxation is when the struct is composed
of scalars, the register may be verified as a fixed-size memory buffer
sized from the BTF type; anything else is rejected.
- A pointer paired with a size argument is always a memory buffer and is
never classified as BTF_ID, so the __sz/__szk case no longer detours
through BTF_ID.
The new design now accepts one previously rejected case: passing
PTR_TO_BTF_ID to a pointer to scalar w/o a following __sz/__szk. The
argument will be classified as KF_ARG_PTR_TO_MEM | MEM_FIXED_SIZE. The
PTR_TO_BTF_ID register will go through check_mem_reg() ->
check_helper_mem_access() -> check_ptr_to_btf_access(). For a pointer to
scalar arg, a kernel btf id will be rejected unless explicitly granted
by btf_struct_access(); a program allocated btf id will be allowed.
The referenced-or-trusted check thus moves into the KF_ARG_PTR_TO_BTF_ID
resolution, alongside the type match.
get_kfunc_ptr_arg_type() no longer needs the register, so drop its regs
and reg parameters; it is now a pure function of the kfunc's BTF.
When a register cannot satisfy a BTF_ID argument, report the register type
passed and, when the expected struct has a reg2btf_ids mapping, the
register type that would be accepted, instead of a confusing "socket".
Update the affected selftest messages accordingly.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/bpf/20260801074633.1595644-16-ameryhung@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
When a nullable buffer is passed as NULL, check_mem_size_reg() is skipped,
so the __szk memory size must be marked precise through the scalar argument
path instead. Exercise this with bpf_dynptr_slice() and a NULL buffer.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/bpf/20260801074633.1595644-12-ameryhung@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
ARG_CONST_SIZE does not require a constant: check_mem_size_reg() accepts
any bounded scalar and verifies the memory access against its maximum
(reg_umax). Rename ARG_CONST_SIZE and ARG_CONST_SIZE_OR_ZERO to
ARG_MEM_SIZE and ARG_MEM_SIZE_OR_ZERO to reflect that. ARG_CONST_ALLOC_
SIZE_OR_ZERO, which does require a constant, is left unchanged.
Pure rename, no functional change.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/bpf/20260801074633.1595644-10-ameryhung@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
A map-of-maps lookup value is refined to a map pointer (map_ptr_or_null)
at lookup time by refine_map_lookup_value(). Test that it is rejected
wherever a raw map value would be read as bytes, so the inner map
descriptor cannot leak.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/bpf/20260801074633.1595644-8-ameryhung@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
bpf_map_lookup_elem() is typed to return PTR_TO_MAP_VALUE for every
map, but for some map kinds the looked up value is actually a
different object: an inner map, a socket or an xsk socket.
Until now this reinterpretation happened once the pointer was
converted from its NULL-able form to a concrete value.
Such reinterpretation logic placement led to mark_ptr_not_null_reg()
being called for a temporary register copy in check_mem_reg() and
check_kfunc_mem_size_reg() (check_mem_size_reg() was buggy because of
not calling it). The temporary copy was necessary to pass
reinterpreted parameters as nullable helper and kfunc arguments.
Avoid this complication by refining map lookup result type right away.
The test case verifier_map_in_map/on_the_inner_map_pointer needs an
update because the verifier now prints a concrete NULL-able type for
the lookup.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/bpf/20260801074633.1595644-6-ameryhung@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
The BPF trampoline preserves only 8 bytes of the target's return value
(R0), so attaching an fexit/fmod_ret/fsession program to a function that
returns a >8 byte value is now rejected by the verifier. Add a bpf_testmod
function returning __int128 and an fexit program that targets it. The
program is expected to fail to load with the "with a >8 byte return value
is not supported for this attach type" message.
A 128-bit __int128 argument is passed in a register pair and occupies two
trampoline context slots. Add a bpf_testmod function taking a leading
__int128 argument followed by an int and a long, and an fexit program that
reads those two trailing arguments and the return value, verifying that the
trampoline reserves enough stack for the 128-bit argument and places the
following arguments and the return value at the right context slots.
__int128 is only available on 64-bit targets (where the compiler defines
__SIZEOF_INT128__). The argument test additionally depends on the calling
convention: x86_64 and arm64 pass an __int128 in a register pair as the
trampoline expects, while other architectures pass it differently (e.g.
s390x passes larger arguments by reference), so that subtest runs only on
x86_64 and arm64 and is skipped elsewhere.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/bpf/20260729050209.2587581-1-yonghong.song@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Several CI runs failed in the libarena parallel tests with -4 (-EINTR) [1],
which says nothing about what actually went wrong.
Two workers can fail like this:
worker 1: gives up, e.g. the rendezvous times out, sets test_abort and
returns its own error (-ETIMEDOUT)
worker 2: sees test_abort and returns -EINTR
-EINTR only means "someone else already gave up", so it carries no
information. Which of the two gets reported depends on the order
pthread_join() collects them, because
err = err ?: (long)thread_ret;
keeps the first non-zero value and drops the rest. When the -EINTR worker
comes first, the error describing the actual failure is lost.
Skip -EINTR entirely: a worker only returns it once another worker has
already reported the real error, so report and log only the real errors.
It is still unclear whether the timeouts come from CI load or from a
problem in the test itself. Report the error accurately first, so the next
failure can be diagnosed.
[1]:
https://github.com/kernel-patches/bpf/actions/runs/29867905253/job/88764463566https://github.com/kernel-patches/bpf/actions/runs/29878191901/job/88794845824
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260723061347.398591-1-jiayuan.chen@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
- Fix tcp_bpf_sendmsg() error path mistaking a concurrently-freed
sk_psock->cork for the local temporary message and freeing it
again. (Chengfeng Ye)
- Reject passing scalar NULL to nonnull arg of a global subprog.
Previously the verifier did not account for the cases directly
passing scalars to a global subprog, e.g.: 'global_func(0);'
would pass even if 'global_func' argument was marked nonnull.
(Amery Hung)
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRINyQBqoQUC24dy5htleuBPyPTXgUCamPsBwAKCRBtleuBPyPT
Xo/uAP0YR6/9em1W/sZnss6Wkwfwd9NdmmlrJqSlt7aq+A+W7AD/V5HbigM4pJ76
CZFkKvnzhhU3dSXm/dBT1/GGJbL4pwo=
=uzKM
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Eduard Zingerman:
- Fix tcp_bpf_sendmsg() error path mistaking a concurrently-freed
sk_psock->cork for the local temporary message and freeing it again
(Chengfeng Ye)
- Reject passing scalar NULL to nonnull arg of a global subprog.
Previously the verifier did not account for the cases directly
passing scalars to a global subprog, e.g.: 'global_func(0);' would
pass even if 'global_func' argument was marked nonnull (Amery Hung)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Fix cork use-after-free in tcp_bpf_sendmsg()
selftests/bpf: Test passing scalar NULL to nonnull global subprog
bpf: Reject passing scalar NULL to nonnull arg of a global subprog
An early return triggered by read_prog_test_msg leaves uninitialized elements,
which leads to memory corruption during free_test_states cleanup.
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Link: https://lore.kernel.org/bpf/20260723085100.482147-5-yangfeng59949@163.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
pthread_create returns 0 on success and a positive error code on failure;
it never returns a negative value. The current conditional branch can never be taken.
Failures during thread creation are silently ignored, which will lead to
invalid memory access when waiting on threads or dereferencing thread handles later.
Fixes: 91b2c0afd0 ("selftests/bpf: Add parallelism to test_progs")
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Link: https://lore.kernel.org/bpf/20260723085100.482147-3-yangfeng59949@163.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
The name has already been freed in the free_subtest_state function
and does not need to be freed again. The extra free is noop since the
pointer was already set to NULL.
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Link: https://lore.kernel.org/bpf/20260723085100.482147-2-yangfeng59949@163.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Currently, there is no RISC-V support for get_preempt_count() and
its fallback path always returns 0.
Add it so that bpf_in_interrupt(), bpf_in_nmi(), bpf_in_hardirq(),
bpf_in_serving_softirq(), and bpf_in_task() work for RISC-V as well.
Given that RISC-V has supported CONFIG_THREAD_INFO_IN_TASK since its
initial commit fbe934d69e ("RISC-V: Build Infrastructure") in 2017,
directly retrieve preempt_count from the thread_info embedded within
task_struct via bpf_get_current_task_btf().
This aligns the implementation with arm64, powerpc, and loongarch.
Tested on a RISC-V virtual machine.
Before:
$ sudo ./test_progs -t exe_ctx
...
#114 exe_ctx:FAIL
Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
After:
$ sudo ./test_progs -t exe_ctx
#114 exe_ctx:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Tested-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/bpf/20260722022906.8778-1-yangtiezhu@loongson.cn
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Add a test to verify that there's no WARNING when detaching fexit link by
following the repro steps of previous commit.
Without the fix, the WARNING could be triggered by this test.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20260722151909.69142-3-leon.hwang@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Enable verifier_may_goto_1 (raw instruction tests), stream_cond_break
(250ms timeout path), and the may_goto_interaction fastcall test on
riscv64 now that the JIT supports timed may_goto.
Signed-off-by: Feng Jiang <jiangfeng@kylinos.cn>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20260723-riscv-bpf-timed-may-goto-v5-3-86acb54e5642@kylinos.cn
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Add a test that checks R0-R5 are preserved across
arch_bpf_timed_may_goto() calls.
Use bpf_get_prandom_u32() to avoid the verifier removing the checks
via DCE.
Suggested-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Feng Jiang <jiangfeng@kylinos.cn>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20260723-riscv-bpf-timed-may-goto-v5-2-86acb54e5642@kylinos.cn
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Largely due to my time off followed by a networking conference
which distracted most maintainers (less so the AI generators).
Including fixes from Bluetooth and WiFi.
Current release - regressions:
- wifi: mt76: fix MAC address for non OF pcie cards
Current release - new code bugs:
- mptcp: fix BUILD_BUG_ON on legacy ARM config
- wifi: cfg80211: guard optional PMSR nominal time
Previous releases - regressions:
- qrtr: ns: raise node count limit to 512, we arbitrarily picked
256 as a limit, turns out it was too low for real world deployments
- vhost-net: fix TX stall when vhost owns virtio-net header
- eth: amd-xgbe: fix MAC_AUTO_SW handling in CL37 AN
- wifi: ath12k: fix low MLO RX throughput on WCN7850
Previous releases - always broken:
- number of random AI fixes for SCTP, RDS and TIPC protocols
- more AI-looking fixes for WiFi drivers
- number of fixes for missing pointer reloading after skb pull
- reject BPF redirect use from qdisc qevent block
- tcp: initialize standalone TCP-AO response padding
- vsock/virtio: collapse receive queue under memory pressure to avoid
client OOMing the host with tiny messages
- ipv4: icmp: fill flow parameters in icmp_route_lookup decoy lookup,
make sure the ICMP response routing follows the routing policy
- gro: fix double aggregation of flush-marked skbs
- ovpn: fix various refcount bugs
- tls: device: push pending open record on splice EOF
- eth: mlx5:
- use sender devcom for MPV master-up
- fix MCIA register buffer overflow on 32 dword reads
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=DIF8
-----END PGP SIGNATURE-----
Merge tag 'net-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Lots of fixes, double the count even for the 'new normal'. Largely due
to my time off followed by a networking conference which distracted
most maintainers (less so the AI generators).
Including fixes from Bluetooth and WiFi.
Current release - regressions:
- wifi: mt76: fix MAC address for non OF pcie cards
Current release - new code bugs:
- mptcp: fix BUILD_BUG_ON on legacy ARM config
- wifi: cfg80211: guard optional PMSR nominal time
Previous releases - regressions:
- qrtr: ns: raise node count limit to 512, we arbitrarily picked
256 as a limit, turns out it was too low for real world deployments
- vhost-net: fix TX stall when vhost owns virtio-net header
- eth: amd-xgbe: fix MAC_AUTO_SW handling in CL37 AN
- wifi: ath12k: fix low MLO RX throughput on WCN7850
Previous releases - always broken:
- number of random AI fixes for SCTP, RDS and TIPC protocols
- more AI-looking fixes for WiFi drivers
- number of fixes for missing pointer reloading after skb pull
- reject BPF redirect use from qdisc qevent block
- tcp: initialize standalone TCP-AO response padding
- vsock/virtio: collapse receive queue under memory pressure to avoid
client OOMing the host with tiny messages
- ipv4: icmp: fill flow parameters in icmp_route_lookup decoy lookup,
make sure the ICMP response routing follows the routing policy
- gro: fix double aggregation of flush-marked skbs
- ovpn: fix various refcount bugs
- tls: device: push pending open record on splice EOF
- eth: mlx5:
- use sender devcom for MPV master-up
- fix MCIA register buffer overflow on 32 dword reads"
* tag 'net-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (234 commits)
drop_monitor: perform u64_stats updates under IRQ-disabled section
drop_monitor: fix size calculations for 64-bit attributes
net: drop_monitor: fix info leak in NET_DM_ATTR_PAYLOAD
mptcp: fix BUILD_BUG_ON on legacy ARM config
selftests: mptcp: userspace_pm: fix undefined variable port
mptcp: fix stale skb->sk reference on subflow close
mptcp: pm: userspace: fix use-after-free in get_local_id
mptcp: decrement subflows counter on failed passive join
mac802154: hold an interface reference across the scan worker
sctp: don't free the ASCONF's own transport in DEL-IP processing
phonet: check register_netdevice_notifier() error in phonet_device_init()
phonet: pep: fix use-after-free in pep_get_sb()
bnge/bng_re: fix ring ID widths
tipc: fix integer overflow in tipc_recvmsg() and tipc_recvstream()
net: airoha: fix ETS channel derivation in airoha_tc_setup_qdisc_ets()
mctp: check register_netdevice_notifier() error in mctp_device_init()
ptp: netc: explicitly clear TMR_OFF during initialization
rds: tcp: unregister sysctl before tearing down listen socket
ipv6: Change allocation flags to match rcu_read_lock section requirements
net: slip: serialize receive against buffer reallocation
...
In make_connection(), the variable "port" is used but never defined.
This leads to an empty argument being passed to wait_local_port_listen(),
causing "printf: : invalid number" errors:
# INFO: Init
# 01 Created network namespaces ns1, ns2 [ OK ]
# INFO: Make connections
# ./../lib.sh: line 651: printf: : invalid number
# 02 Established IPv4 MPTCP Connection ns2 => ns1 [ OK ]
# INFO: Connection info: 10.0.1.2:59516 -> 10.0.1.1:50002
# ./../lib.sh: line 651: printf: : invalid number
# 03 Established IPv6 MPTCP Connection ns2 => ns1 [ OK ]
Fix it by using the correctly defined variable "app_port", which holds the
appropriate port number for the connection.
Fixes: 39348f5f2f ("selftests: mptcp: wait for port instead of sleep")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260722-net-mptcp-misc-fixes-7-2-rc5-v1-4-6fb595bc86ef@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* ensure keepalive timestamps are computed using monotonic source
* avoid UAF in unlock_ovpn() when iterating over release_list
* fix memleak in selftest tool
* ensure reference to peer is acquired before scheduling worker
(which may drop the not-yet-taken ref)
* fix refcount leak in case of concurrent TX and RX TCP error
* fix potential refcount unbalance in case of sock release in
P2P mode
-----BEGIN PGP SIGNATURE-----
iJEEABYIADkWIQQr0db7q+Rc7Zog28Fc8QQzwdnOtwUCal4xNRsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDIACgkQXPEEM8HZzrcjWQEAzhUfvdvKlB0R3IjYs5ze
xUocdtTNVf3B2mOzRDMeu9oA/0PlyHorMDIi5l4ffiz+yzqbsul3929KjsRwTWnd
E8gI
=sQH6
-----END PGP SIGNATURE-----
Merge tag 'ovpn-net-20260720' of https://github.com/OpenVPN/ovpn-net-next
Antonio Quartulli says:
====================
Included fixes:
* ensure keepalive timestamps are computed using monotonic source
* avoid UAF in unlock_ovpn() when iterating over release_list
* fix memleak in selftest tool
* ensure reference to peer is acquired before scheduling worker
(which may drop the not-yet-taken ref)
* fix refcount leak in case of concurrent TX and RX TCP error
* fix potential refcount unbalance in case of sock release in
P2P mode
* tag 'ovpn-net-20260720' of https://github.com/OpenVPN/ovpn-net-next:
ovpn: use monotonic clock for peer keepalive timeouts
ovpn: fix use after free in unlock_ovpn()
selftests/net: ovpn: fix getaddrinfo memory leak in ovpn_parse_remote()
ovpn: hold peer before scheduling keepalive work
ovpn: fix peer refcount leak in TCP error paths
ovpn: avoid putting unrelated P2P peer on socket release
====================
Link: https://patch.msgid.link/20260720144131.3657121-1-antonio@openvpn.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add packetdrill coverage for the RFC 9293 reset checks on request
sockets in SYN-RECEIVED. Verify that an exact RST removes the request,
a non-exact in-window RST sends a challenge ACK without removing it,
and an out-of-window RST is silently discarded.
Also cover an RST|ACK with an unacceptable ACK number to ensure RST
sequence validation runs before ACK-field validation.
Signed-off-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260717081443.809393-3-yangyx22@mails.tsinghua.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test with PVID VLAN that matches the flags of the VLAN following it
and check if the range is properly dumped. PVID VLAN should be on its own
and all VLANs should be present in the dump.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260721140922.682265-3-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Teach libarena's BPF atomic primitives to use compiler builtins for
load-acquire and store-release when Clang advertises
__BPF_FEATURE_LOAD_ACQ_STORE_REL. Older compilers continue to use the
existing barrier-based fallback.
Notably, as BPF programs begin running on arm64, it is better to use the
more appropriate variants since we can no longer rely on x86 TSO ordering.
Commit 880442305a ("bpf: Introduce load-acquire and store-release instructions")
introduced support, hence kernels from 6.15 onwards are needed when
compiling with compilers supporting these instructions. We have
relatively recent kernel version requirements in libarena anyway, and
have not cut first release, hence declare such a dependency.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260722141003.2841007-1-puranjay@kernel.org
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Add a raw BTF test with two bpf_refcount fields. The duplicate must be
rejected during BTF loading instead of reaching the duplicate-field
invariant in btf_parse_fields().
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://patch.msgid.link/20260719153634.2908692-6-memxor@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Add a raw BTF test with a spin lock directly in a struct and another in a
nested struct. The duplicate must now be rejected during BTF loading.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://patch.msgid.link/20260719153634.2908692-5-memxor@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
In these netconsole tests, bash is used with errexit (set -e). It means
that if the busywait timeout, the tests finish without printing an error
message.
It is fine to ignore these errors, because the following validate_xxx
helpers will check the content of the output file, and exit with an
appropriated error message, e.g. FAIL: File was not generated.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-7-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This psp.py selftest was failing on my side when only using the
drivers/net config file on top of the default one -- the recommended way
to execute selftest targets.
It looks like some kernel config are needed to execute the new tc
commands.
Note that this was not visible on NIPA, because these tests are executed
with the drivers/net/hw ones, combining the two config files, and the hw
one contains the missing ones.
Fixes: 3f74d5bb80 ("selftests/net: Add env for container based tests")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Wei Wang <weibunny@fb.com>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-6-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The default timeout is 45 seconds, that's too low for the xdp.py test.
Indeed, this test can take up to 3 minutes with some debug kernel config
on NIPA. Set a timeout to 6 minutes, just to be on the safe side.
Note that the Fixes tag here points to the introduction of the xdp.py
test because I don't know when this test started to take more than 45
seconds. That's OK because a timeout of 6 minutes is not exaggerated.
Fixes: 1cbcb1b28b ("selftests: drv-net: Test XDP_PASS/DROP support")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-5-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The default timeout is 45 seconds, that's too low for a few ovpn tests.
Indeed, these tests can take up to 50 seconds with some debug kernel
config on NIPA. Set a timeout to 90 seconds, just to be on the safe
side.
Note that the Fixes tag here points to the introduction of the ovpn
tests because I don't know when they started to take more than 45
seconds. That's OK because a timeout of 1.5 minutes is not exaggerated.
Fixes: 959bc330a4 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-4-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
They are required to run the selftests:
- Tests are executed in v4 and v6.
- Virtual Ethernet are used between the different netns.
This has not been seen on NIPA before, because the 'ovpn' tests are
executed with the 'tcp_ao' ones, merging their config files. These two
kernel config are present in tools/testing/selftests/net/tcp_ao/config.
This issue is visible when only the ovpn config is used on top of the
default one. This is the recommended way to execute selftest targets.
Fixes: 959bc330a4 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-3-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The kselftests doc mentions that a config file should be present "if a
test needs specific kernel config options enabled". This selftest
requires some kernel config, but no config file was provided.
We could say that a sub-target could use the parent's config file, but
the kselftests doc doesn't mention anything about that. Plus the
net/openvswitch target is the only net target without a config file.
Here is a new config file, which is a trimmed version of the net one,
with hopefully the minimal required kconfig on top of 'make defconfig'.
The Fixes tag points to the introduction of the net/openvswitch target,
just to help validating this target on stable kernels.
Fixes: 25f16c873f ("selftests: add openvswitch selftest suite")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-2-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is required to use unshare(CLONE_NEWUSER).
This has not been seen on NIPA before, because the 'af_unix' tests are
executed with the 'net' ones, merging their config files. USER_NS is
present in tools/testing/selftests/net/config.
This issue is visible when only the af_unix config is used on top of the
default one. This is the recommended way to execute selftest targets.
Fixes: ac011361bd ("af_unix: Add test for sock_diag and UDIAG_SHOW_UID.")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-1-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RV64 BPF JIT now supports mixing bpf2bpf and tailcalls.
Therefore, the tailcall_bpf2bpf tests can be safely removed
from the riscv64 denylist.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20260708064436.2971933-8-pulehui@huaweicloud.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
progs/lsm_bdev.c keys its verity_devices hashmap with the raw kernel dev_t
read straight off bdev->bd_dev, i.e. MKDEV(major, minor) = (major << 20) |
minor. prog_tests/lsm_bdev.c instead builds its lookup key with dev_key =
(__u32)st.st_rdev from stat(2), but the stat(2) syscall fills st_rdev via
the kernel's new_encode_dev(), a different bit layout: (minor & 0xff) |
(major << 8) | ((minor & ~0xff) << 12).
For any device with a non-trivial major these two values differ, so the
lookup can never find what the BPF program stored, and test_lsm_bdev()
always fails with:
test_lsm_bdev:FAIL:map lookup unexpected error: -2 (errno 2)
Reconstruct the raw kernel dev_t from the decoded major/minor instead of
casting st_rdev directly, restoring the layout the BPF program actually
reads.
Fixes: 96f4c251a0 ("selftests/bpf: add block device management selftests")
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/bpf/20260720-selftests-bpf_fixes-v2-2-b450eda93dfe@suse.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
After "make install", test_progs fails because two files end up in the
wrong place:
- bpftool: TEST_GEN_PROGS_EXTENDED flattens it into $(INSTALL_PATH), losing
the tools/sbin/ prefix that detect_bpftool_path() expects. Remove it from
TEST_GEN_PROGS_EXTENDED and install it explicitly under tools/sbin/
instead.
- *.BTF: resolve_btfids writes resolve_btfids.test.o.BTF as a side-effect
of the build but INSTALL_RULE never copies it over. Install all *.BTF
files alongside the rest of the per-flavor output.
Fixes: f21fae5774 ("selftests/bpf: Add a few helpers for bpftool testing")
Fixes: 522397d05e ("resolve_btfids: Change in-place update with raw binary output")
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/bpf/20260720-selftests-bpf_fixes-v2-1-b450eda93dfe@suse.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
- Avoid redundant allocations when allocating IMSIC page tables
- Apply SBI FWFT LOCK flag only on successful set
- Bound SBI PMU counter mask scan to BITS_PER_LONG, since on RV32
the PMU SBI start/stop helper can only access 32 PMU counters.
- Skip TLB flush when G-stage PTE becomes valid if the Svvptc
extension is available.
- Always show Zicbo[m|z|p] block sizes in ONE_REG
- Inject instruction access fault on unmapped guest fetch
- Use raw spinlock for irqs_pending and irqs_pending_mask
- Fix Spectre-v1 in vector register access via ONE_REG
x86:
- Fixes to SEV selftests.
- Once free_nested() did a VMCLEAR of shadow VMCS, there's no need to VMCLEAR it
again if the kernel is preempted and thread migration happens
- Preserve nested TDP shadow page tables if they are used as roots, instead of
clearing them unnecessarily
- Fix use of stale data if out-of-memory happens after vendor module reload
- Check for invalid/obsolete root *after* making MMU pages available, because
the latter can make a page invalid
- Only reset TSC Deadline Timer in apic_timer_expired on KVM_RUN
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmpfSUwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOrWQf/S8Za6t7bZbQbJHDV0NXCKufpyKyz
l6WMsLGdn4LFLNqCtKhvQf5lEZ5PKRHFTGoWrO1wQSbREHRUCnfMD5lsSKQA4Grf
0QpQ6YBjXFv6zg0M456/Q/S1oyusyqkXXBS8BxlBQyfqR+ByKx8f4PXTGazfUua3
4SPHr5TUxr6CXy8715OQUGa1Xdf0/5d3OseiAgBwqM31yZPhK0tsar77Cd9P93bs
DC+FzfphHg0gb3s/xSfuVR0BPnqHvQMDF9rS/YKgJgJdZkzHXCo7muWRQmHWK+FR
Q2zOTWSlJATQucC0+2j1yj2Wdhg1itgZTfj/8RaIDRKbmjk0S1bLc3bamg==
=Svds
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"RISC-V:
- Avoid redundant allocations when allocating IMSIC page tables
- Apply SBI FWFT LOCK flag only on successful set
- Bound SBI PMU counter mask scan to BITS_PER_LONG, since on RV32 the
PMU SBI start/stop helper can only access 32 PMU counters.
- Skip TLB flush when G-stage PTE becomes valid if the Svvptc
extension is available.
- Always show Zicbo[m|z|p] block sizes in ONE_REG
- Inject instruction access fault on unmapped guest fetch
- Use raw spinlock for irqs_pending and irqs_pending_mask
- Fix Spectre-v1 in vector register access via ONE_REG
x86:
- Fixes to SEV selftests
- Once free_nested() did a VMCLEAR of shadow VMCS, there's no need to
VMCLEAR it again if the kernel is preempted and thread migration
happens
- Preserve nested TDP shadow page tables if they are used as roots,
instead of clearing them unnecessarily
- Fix use of stale data if out-of-memory happens after vendor module
reload
- Check for invalid/obsolete root *after* making MMU pages available,
because the latter can make a page invalid
- Only reset TSC Deadline Timer in apic_timer_expired on KVM_RUN"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Only reset TSC Deadline Timer in apic_timer_expired on KVM_RUN
KVM: selftests: sev_init2_tests: Derive SEV availability from KVM
KVM: selftests: sev_smoke_test: Only run VM types the host offers
KVM: x86/mmu: Fix use-after-free on vendor module reload
KVM: x86/mmu: Preserve nested TDP shadow page tables if they are used as roots
KVM: x86: Check for invalid/obsolete root *after* making MMU pages available
KVM: nVMX: Hide shadow VMCS right after VMCLEAR
KVM: riscv: Fix Spectre-v1 in vector register access
RISC-V: KVM: Serialize virtual interrupt pending state updates
RISC-V: KVM: Inject instruction access fault on unmapped guest fetch
RISC-V: KVM: Zicbo[m|z|p] block sizes should be always present in ONE_REG
riscv: kvm: Skip TLB flush when G-stage PTE becomes valid with Svvptc
KVM: riscv: PMU: Bound counter mask scan to BITS_PER_LONG
KVM: riscv: SBI FWFT: Apply LOCK flag only on successful set
RISC-V: KVM: Avoid redundant page-table allocations in ioremap topup
The test asserted that the X86_FEATURE_SEV CPUID bit exactly matches
whether KVM offers KVM_X86_SEV_VM. That is not an invariant: when all
SEV ASIDs are assigned to SEV-SNP, KVM does not offer the SEV VM type
even though CPUID reports SEV, so the test aborts on an SNP-only host.
Derive SEV availability from KVM_CAP_VM_TYPES (as already done for SEV-ES
and SNP), assert only the one-way implication that a type offered by KVM
is also reported in CPUID, and TEST_REQUIRE() the SEV VM type so the test
skips cleanly when it is unavailable.
Reviewed-by: Tycho Andersen (AMD) <tycho@kernel.org>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-ID: <5d3c345113748f39b7982e365d241abaf3e11086.1784545391.git.dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
sev_smoke_test ran the plain SEV subtest unconditionally, gated only on
the X86_FEATURE_SEV CPUID bit, while gating SEV-ES and SNP on the
KVM_CAP_VM_TYPES bits. CPUID reporting SEV does not mean KVM offers the
SEV VM type: when all SEV ASIDs are assigned to SEV-SNP, KVM_X86_SEV_VM
is unavailable even though X86_FEATURE_SEV is set. On such a host the
test aborts in KVM_CREATE_VM instead of exercising the available modes.
Gate the SEV subtest on KVM_CAP_VM_TYPES like the others, so the test
runs the VM types the host actually offers.
Reviewed-by: Tycho Andersen (AMD) <tycho@kernel.org>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-ID: <2b5e7a83d277134294199a455469bb436196b902.1784545391.git.dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a test that sends 2 MB of data using randomly sized small packets
(129-512 bytes) over a SOCK_STREAM connection. Packets above
GOOD_COPY_LEN (128) bypass the in-place coalescing in recv_enqueue(),
forcing each one into its own skb.
Without receive queue collapsing, the per-skb overhead eventually
exceeds buf_alloc and the connection is reset. The test verifies
that all data arrives and that content integrity is preserved.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260708102904.50732-3-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
