The arch_local_irq_*() wrappers in <asm/irqflags.h> dispatch between two
underlying primitives: the __daif_* path on most systems, and the
__pmr_* path on builds that use GIC PMR-based masking (Pseudo-NMI). The
leaf primitives are already __always_inline, but the wrappers themselves
are plain "static inline".
That is unsafe for noinstr callers: nothing prevents the compiler from
emitting an out-of-line copy of e.g. arch_local_irq_disable(), and an
out-of-line copy can be instrumented (ftrace, kcov, sanitizers), which
breaks the noinstr contract on the entry/idle paths that rely on these
helpers.
x86 hit and fixed exactly this class of bug in commit 7a745be1cc
("x86/entry: __always_inline irqflags for noinstr").
Force-inline all of the arch_local_irq_*() wrappers so they cannot be
emitted out-of-line:
- arch_local_irq_enable()
- arch_local_irq_disable()
- arch_local_save_flags()
- arch_irqs_disabled_flags()
- arch_irqs_disabled()
- arch_local_irq_save()
- arch_local_irq_restore()
The primary motivation is noinstr safety. There is a useful side effect
for fleet-wide profiling: when the wrapper is emitted out-of-line,
samples taken inside it during the post-WFI IRQ unmask in
default_idle_call() are attributed to arch_local_irq_enable rather than
default_idle_call(), and the FP-unwinder loses default_idle_call() from
the chain.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Leonardo Bras <leo.bras@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
On ThinkBook 16p systems the platform mute LED is present and
bound to the audio-mute trigger, but it does not react to Master
mute changes.
The affected fixup chain sets up the DAC routing, but does not enable
vmaster mute LED handling. Because of that, the generic HDA code does
not mark Master Playback Switch with SNDRV_CTL_ELEM_ACCESS_SPK_LED,
and the audio-mute trigger never receives speaker mute updates.
Add a ThinkBook-specific wrapper around alc287_fixup_bind_dacs() and
enable spec->gen.vmaster_mute_led during PRE_PROBE. This keeps the
existing DAC binding logic unchanged while allowing the normal generic
LED path to drive the mute LED.
Signed-off-by: Yuxuan Qiu <yuxuanqiu596@gmail.com>
Link: https://patch.msgid.link/20260424112107.22206-1-yuxuanqiu596@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The dma_sync_single_for_device() function expects a dma_addr_t, but
iommu_pages_flush_incoherent() was incorrectly passing a virtual
address.
Since iommu_pages_start_incoherent() enforces a 1:1 mapping between
DMA addresses and physical addresses (checked via WARN_ON), we can
convert the virtual address to a physical address before passing it to
the DMA API.
This also matches the behaviour of the other non-x86 in
iommu_pages_free_incoherent(), which uses virt_to_phys(virt);
Fixes: 36ae67b139 ("iommu/pages: Add support for incoherent IOMMU page table walkers")
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The UAC3 cluster descriptor length check in
snd_usb_get_audioformat_uac3()was added to
make sure that the buffer is large enough for
a struct uac3_cluster_header_descriptor before the
returned data is cast and used.
However, the check uses sizeof(cluster), where cluster
is a pointer, not the size of the descriptor header.
This makes the validation depend on the architecture
pointer size and does not match the intended object size.
Check against sizeof(*cluster) instead.
Fixes: fb4e2a6e8f ("ALSA: usb-audio: Fix out-of-bounds read in snd_usb_get_audioformat_uac3()")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260424-alsa-usb-uac3-cluster-size-v1-1-99a5808898a3@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
loopback_check_format() may stop the capture side when playback starts
with parameters that no longer match a running capture stream. Commit
826af7fa62 ("ALSA: aloop: Fix racy access at PCM trigger") moved
the peer lookup under cable->lock, but the actual snd_pcm_stop() still
runs after dropping that lock.
A concurrent close can clear the capture entry from cable->streams[] and
detach or free its runtime while the playback trigger path still holds a
stale peer substream pointer.
Keep a per-cable count of in-flight peer stops before dropping
cable->lock, and make free_cable() wait for those stops before
detaching the runtime. This preserves the existing behavior while
making the peer runtime lifetime explicit.
Reported-by: syzbot+8fa95c41eafbc9d2ff6f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8fa95c41eafbc9d2ff6f
Fixes: 597603d615 ("ALSA: introduce the snd-aloop module for the PCM loopback")
Cc: stable@vger.kernel.org
Suggested-by: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260424-alsa-aloop-peer-stop-uaf-v2-1-94e68101db8a@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently the runtime.oss.trigger field may be accessed concurrently
without protection, which may lead to the data race. And, in this
case, it may lead to more severe problem because it's a bit field; as
writing the data, it may overwrite other bit fields as well, which
confuses the operation completely, as spotted by fuzzing.
Fix it by covering runtime.oss.trigger bit fled also with the existing
params_lock mutex in both snd_pcm_oss_get_trigger() and
snd_pcm_oss_poll().
Reported-and-tested-by: Jaeyoung Chung <jjy600901@snu.ac.kr>
Closes: https://lore.kernel.org/20260423145330.210035-1-jjy600901@snu.ac.kr
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20260424112205.123703-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Due to CVE-2023-20585, the PPR log buffer must use the maximum supported
size (512K) on Genoa (Family 0x19, model >= 0x10) systems when SNP is
enabled, to mitigate a potential security vulnerability. Note that Family
0x19 models below 0x10 (Milan) do not support PPR when SNP is enabled.
Hence the PPR log size increase is only applied for model >= 0x10.
All other systems continue to use the default PPR log buffer size (8K).
Apply the errata fix by making the following changes:
- Introduce global new variable (amd_iommu_pprlog_size) to have PPR log buffer
size. Adjust variable size for Genoa family.
- Extend 'amd_iommu_apply_erratum_snp()' to also set the PPR log buffer
size to maximum for Family 0x19 model >= 0x10 when SNP is enabled.
- Rename PPR_* macros to make it more readable.
Link: https://www.amd.com/en/resources/product-security/bulletin/amd-sb-3016.html
Cc: Borislav Petkov <bp@alien8.de>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Due to CVE-2023-20585, the Event log buffer must use the maximum supported
size (512K) on Milan/Genoa (Family 0x19) systems when SNP is enabled,
to mitigate a potential security vulnerability. All other systems continue to
use the default Event log buffer size (8K).
Apply the errata fix by making the following changes:
* Introduce new global variable (amd_iommu_evtlog_size) to have event log
buffer size. Adjust variable size for family 0x19.
* Since 'iommu_snp_enable()' must be called after the core IOMMU subsystem
is initialized, it cannot be moved to the early init stage. The SNP errata
must also be applied after the 'iommu_snp_enable()' check. Therefore,
'alloc_event_buffer()' and 'iommu_enable_event_buffer()' are now called
in the IOMMU_ENABLED state, after the errata is applied.
* Adjust alloc_event_buffer() and iommu_enable_event_buffer() to handle
all IOMMU instances.
* Also rename EVT_* macros to make it more readable.
Link: https://www.amd.com/en/resources/product-security/bulletin/amd-sb-3016.html
Cc: Borislav Petkov <bp@alien8.de>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
cs35l56_hda_mixer_get() ignores regmap_read() and
cs35l56_hda_mixer_put() ignores regmap_update_bits_check().
This makes the ASP TX source controls report success when a regmap
access fails. The write path returns no change instead of an error,
and the read path continues after a failed read instead of aborting
the control callback.
Propagate the regmap errors, matching the posture and volume controls
in this driver.
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260423-alsa-cs35l56-asp-tx-source-errors-v1-1-17ea7c62ec31@gmail.com
The expression (*opcode++ << 24) and exp * code_alignment_factor
may overflow signed int and becomes negative.
Fix this by casting each byte to u64 before shifting. Also fix
the misaligned break statement while we are here.
Example of the result can be seen here:
Link: https://godbolt.org/z/zhY8d3595
It maybe not a real problem, but could be a issue in future.
Fixes: d499e9627d ("arm64/scs: Fix handling of advance_loc4")
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The original link is no longer valid. Replace it with the official
PDF of the 2nd edition. The new link points to the exact 2nd edition
that the existing comment in isofs.rst refers to.
Signed-off-by: Ziran Zhang <zhangcoder@yeah.net>
Link: https://patch.msgid.link/20260425142943.6809-1-zhangcoder@yeah.net
Signed-off-by: Jan Kara <jack@suse.cz>
ieee80211_invoke_fast_rx() is documented as safe for parallel RX, but
its per-invocation rx_result is declared static. Concurrent callers then
share one instance and can overwrite each other's result between
ieee80211_rx_mesh_data() and the switch on res.
That can make a packet that was queued or consumed by
ieee80211_rx_mesh_data() fall through into ieee80211_rx_8023(), or make
a packet that should continue return as queued.
Make res an automatic variable so each invocation keeps its own result.
Fixes: 3468e1e0c6 ("wifi: mac80211: add mesh fast-rx support")
Cc: stable@vger.kernel.org
Signed-off-by: Catherine <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260424131435.83212-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
__ieee80211_rx_handle_packet() resolves the link via
ieee80211_rx_data_set_link() on the pubsta->mlo path but ignores the
helper's return value. Inside the helper,
rx->link = rcu_dereference(rx->sdata->link[link_id]);
can leave rx->link NULL if link_id references a slot already cleared
by ieee80211_vif_set_links() during station-initiated ML
reconfiguration (see mlme.c's ieee80211_ml_reconfiguration(), which
invalidates sdata->link[] before the matching
ieee80211_sta_remove_link() loop walks the link-sta hash). RX dispatch
still resolves a link_sta from the hash and then drops into
ieee80211_prepare_and_rx_handle(), which dereferences link->conf->addr.
Every other user site of ieee80211_rx_data_set_link() checks the return
and bails on failure; only this branch did not. Mirror the safe
pattern.
Fixes: e66b7920aa ("wifi: mac80211: fix initialization of rx->link and rx->link_sta")
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260422000651.4184602-1-michael.bommarito@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
NL80211_CMD_SET_PMK and NL80211_CMD_DEL_PMK manage the offloaded
4-way-handshake PMK state used by drivers advertising
NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X. The only in-tree
driver that wires up both ->set_pmk / ->del_pmk and advertises
the feature today is brcmfmac, so the practical reach of this
patch is narrow.
Both ops were introduced without a .flags gate, so the generic
netlink layer dispatches them to an unprivileged caller instead
of rejecting with -EPERM at the permission check. Every other
connection-state op in the adjacent block (CONNECT, ASSOCIATE,
AUTHENTICATE, SET_KEY, ...) carries GENL_UNS_ADMIN_PERM; SET_PMK
/ DEL_PMK were introduced without the flag in 2017 and left
unchanged by later refactors. Johannes checked the original
Intel submission history and confirmed there is no admin check
in any prior revision either, so this seems likely to be a
simple oversight rather than an intentional carve-out.
Require GENL_UNS_ADMIN_PERM so the genl layer performs the same
capable(CAP_NET_ADMIN) check as its siblings. wpa_supplicant
already needs CAP_NET_ADMIN for every other nl80211 op it issues,
so supplicant operation is unaffected. The worst case the missing
gate enables today is an unprivileged local process on a
multi-user system invalidating the offloaded PMK state of another
user's 4-way-handshake session, forcing a full EAP re-auth on the
next reconnect.
Verified in UML: an unprivileged probe (uid=1000) sees
SET_MULTICAST_TO_UNICAST (sibling op with GENL_UNS_ADMIN_PERM)
return -EPERM on both pre- and post-fix kernels, while SET_PMK /
DEL_PMK return -ENODEV from nl80211_pre_doit()'s wdev lookup pre-
fix (proving dispatch crossed the genl permission check) and
-EPERM post-fix (rejected at the genl layer as intended).
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Fixes: 3a00df5707 ("cfg80211: support 4-way handshake offloading for 802.1X")
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom>
Link: https://patch.msgid.link/20260421224552.4044147-1-michael.bommarito@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The existing validation only checks if recvlength exceeds
LBS_CMD_BUFFER_SIZE, but doesn't check the lower bound. When a
USB device sends a response shorter than MESSAGE_HEADER_LEN, the
subtraction (recvlength - MESSAGE_HEADER_LEN) wraps to a huge
value, causing memcpy to corrupt the heap.
Add the same lower bound check that libertas_tf already has.
Signed-off-by: Amir Mohammad Jahangirzad <a.jahangirzad@gmail.com>
Link: https://patch.msgid.link/20260418004247.368944-1-a.jahangirzad@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Same fix as b43: the firmware-controlled key index in b43legacy_rx()
can exceed dev->max_nr_keys. The existing B43legacy_WARN_ON is
non-enforcing in production builds, allowing an out-of-bounds read of
dev->key[].
Make the check enforcing by dropping the frame for invalid indices.
Fixes: 75388acd0c ("[B43LEGACY]: add mac80211-based driver for legacy BCM43xx devices")
Cc: stable@vger.kernel.org
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Link: https://patch.msgid.link/20260417111145.2694196-2-tristmd@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware-controlled key index in b43_rx() can exceed the dev->key[]
array size (58 entries). The existing B43_WARN_ON is non-enforcing in
production builds, allowing an out-of-bounds read.
Make the B43_WARN_ON check enforcing by dropping the frame when the
firmware returns an invalid key index.
Suggested-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Michael Büsch <m@bues.ch>
Fixes: e4d6b79518 ("[B43]: add mac80211-based driver for modern BCM43xx devices")
Cc: stable@vger.kernel.org
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Link: https://patch.msgid.link/20260417111145.2694196-1-tristmd@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Watchdog task might end between send_sig() and kthread_stop() calls, what
results in the use-after-free issue. Fix this by increasing watchdog task
reference count before calling send_sig() and dropping it by switching to
kthread_stop_put().
Cc: stable@vger.kernel.org
Fixes: 373c83a801 ("brcmfmac: stop watchdog before detach and free everything")
Fixes: a9ffda88be ("brcm80211: fmac: abstract bus_stop interface function pointer")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260416093339.2066829-1-m.szyprowski@samsung.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some Xfinity XB8 firmware advertises >1 spatial stream MCS indexes in
their basic HT-MCS set. On cards with lower spatial streams, the check
would fail, and we'd be stuck with no HT when in fact work fine with its
own supported rate. This change makes it so the check is only performed
in strict mode.
Fixes: 574faa0e93 ("wifi: mac80211: add HT and VHT basic set verification")
Signed-off-by: Rio Liu <rio@r26.me>
Link: https://patch.msgid.link/99Mv9QEceyPrQhSP52MtAVmz0_kWJmzqotJjD9YW6LGLqk-AZloAueUyHCURilFkuqOh6Ecv8i2KKdSE1ujP3AnbU5QEouVisT1w_V3xdfc=@r26.me
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
My Outlook email address often sends emails from kernel devs to the junk
folder. Also, emails from some addresses (eg suse.de) are not received
at all. Update the email to my alternate Proton Mail address.
Signed-off-by: Aditya Garg <gargaditya08@proton.me>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260424175846.15103-1-gargaditya08@proton.me
Driver core expects devices to be dynamically allocated and will, for
example, complain loudly when no release function has been provided.
Use root_device_register() to allocate and register the root device
instead of open coding using a static device.
Note that this also fixes a reference leak in the unlikely event that
device_register() ever fails.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Fix a typo of "RGB332" in kerneldoc for the drm_crtc_fill_palette_332()
helper.
Fixes: 7ff61177b7 ("drm/color-mgmt: Prepare for RGB332 palettes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/c413e45c8f752a532a4ff377f7a8b9eaab4a082a.1776757681.git.geert+renesas@glider.be
This driver is attached to a ~2000x80 screen, which is a lot more than
a single page. This causes out of memory errors in some rare cases.
Reported-by: soopyc <cassie@soopy.moe>
Closes: https://github.com/t2linux/fedora/issues/51
Signed-off-by: Sasha Finkelstein <k@chaosmail.tech>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 0670c2f56e ("drm/tiny: add driver for Apple Touch Bars in x86 Macs")
Cc: <stable@vger.kernel.org> # v6.15+
Link: https://patch.msgid.link/20260420-x86-tb-vmalloc-v1-1-7757ff657223@chaosmail.tech
xfs_trans_alloc_icreate() can fail with ENOSPC when delalloc
reservations have consumed most of the available block count
(fdblocks). xfs_trans_alloc() already retries internally with
xfs_blockgc_flush_all(), but that only trims post-EOF speculative
preallocation and may not free enough space for the transaction
reservation.
Add a retry with xfs_flush_inodes() when xfs_trans_alloc() returns
ENOSPC. This forces writeback of all dirty inodes via
sync_inodes_sb(), converting delalloc reservations to real
allocations and freeing the over-reserved portion back to fdblocks.
This fixes all callers of xfs_trans_alloc_icreate() and removes
the existing caller-level retry from xfs_create(), which is now
handled centrally.
Signed-off-by: Ravi Singh <ravising@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
display_get_pci_dev_of() gets a referenced PCI device via
pci_get_device(). Drop that reference when pci_enable_device() fails and
release it during the managed teardown path after pci_disable_device().
Without that, ofdrm leaks the pci_dev reference on both the error path
and the normal cleanup path.
Fixes: c8a17756c4 ("drm/ofdrm: Add ofdrm for Open Firmware framebuffers")
Co-developed-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Co-developed-by: Taegyu Kim <tmk5904@psu.edu>
Signed-off-by: Taegyu Kim <tmk5904@psu.edu>
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260420002513.216-1-dbgh9129@gmail.com
drm_gem_fb_init_with_funcs() computes sub-sampled plane dimensions
using plain integer division:
unsigned int width = mode_cmd->width / (i ? info->hsub : 1);
unsigned int height = mode_cmd->height / (i ? info->vsub : 1);
However, the ioctl-level framebuffer_check() in drm_framebuffer.c uses
drm_format_info_plane_width/height() which round up dimensions via
DIV_ROUND_UP(). This inconsistency corrupts the subsequent GEM object
size check for certain pixel format and dimension combinations.
For example, with NV12 (vsub=2) and a 1-pixel-tall framebuffer the
GEM size validation path sees height=0 instead of height=1. The
expression (height - 1) then wraps to UINT_MAX as an unsigned int,
causing min_size to overflow and wrap back to a small value. A tiny
GEM object therefore passes the size guard, yet when the GPU accesses
the chroma plane it will read or write memory beyond the object's
bounds.
Fix by replacing the open-coded divisions with drm_format_info_plane_width()
and drm_format_info_plane_height(), which use DIV_ROUND_UP() and match
the calculation already used in framebuffer_check().
Fixes: 4c3dbb2c31 ("drm: Add GEM backed framebuffer library")
Cc: stable@vger.kernel.org # v4.14+
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ashutosh Desai <ashutoshdesai993@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260420013637.457751-1-ashutoshdesai993@gmail.com
Store SMT register cache per bank instead of using a single array.
On RZ/V2H(P), RZ/V2N, and RZ/G3E, the SMT register is split across two
32-bit registers: bits 0/8/16/24 control pins 0-3, while pins 4-7 are
controlled by the corresponding bits in the next register. The previous
implementation cached only a single SMT register, leading to incomplete
save/restore of SMT state.
Convert cache->smt to a per-bank array and allocate storage for both
halves. Update suspend/resume handling to save and restore both SMT
registers when present.
Fixes: 837afa592c ("pinctrl: renesas: rzg2l: Add suspend/resume support for Schmitt control registers")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260413182456.811543-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
When saving/restoring pull-up/down register state during suspend/resume,
the second PUPD register access was incorrectly using the same base offset
as the first, effectively reading/writing the same register twice instead
of the adjacent one.
Add the correct + 4 byte offset to the second RZG2L_PCTRL_REG_ACCESS32
call so that pupd[1][port] is properly saved and restored from the next
32-bit register in the PUPD register pair, covering pins 4–7 of ports
with 4 or more pins.
Fixes: b2bd65fbb6 ("pinctrl: renesas: rzg2l: Add suspend/resume support for pull up/down")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260328090548.84124-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The current implementation of aisb calculation will erroneously index
via an unsigned long * as well as multiply by 8B for every 64-bits in
the offset; only one or the other is required. This throws off aisb
calculations once the number of devices exceeds 64, and can result
in out-of-bounds access as well as failure to indicate summary bits
associated with those devices in guests.
Fix this by converting to a physical address before applying the
offset, as is already done in arch/s390/pci/pci_irq.c.
Fixes: 3c5a1b6f0a ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The renesas,rzv2h-usb2phy-reset binding schema defines #mux-state-cells
as a required property. Add it to the usb20phyrst node to fix the
following warnings:
arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dtb: usb20phy-reset@15830000 (renesas,r9a09g056-usb2phy-reset): '#mux-state-cells' is a required property
arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk-cn15-emmc.dtb: usb20phy-reset@15830000 (renesas,r9a09g056-usb2phy-reset): '#mux-state-cells' is a required property
arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk-cn15-sd.dtb: usb20phy-reset@15830000 (renesas,r9a09g056-usb2phy-reset): '#mux-state-cells' is a required property
Fixes: 6a1b6f7e56 ("dt-bindings: reset: renesas,rzv2h-usb2phy: Add '#mux-state-cells' property")
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/31210e05f7189b466b30eedbdda3d11726dac279.1775575276.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The renesas,rzv2h-usb2phy-reset binding schema defines #mux-state-cells
as a required property. Add it to the usb20phyrst and usb21phyrst nodes
to fix the following warnings:
arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dtb: usb20phy-reset@15830000 (renesas,r9a09g057-usb2phy-reset): '#mux-state-cells' is a required property
arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dtb: usb21phy-reset@15840000 (renesas,r9a09g057-usb2phy-reset): '#mux-state-cells' is a required property
arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk-cn15-emmc.dtb: usb20phy-reset@15830000 (renesas,r9a09g057-usb2phy-reset): '#mux-state-cells' is a required property
arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk-cn15-emmc.dtb: usb21phy-reset@15840000 (renesas,r9a09g057-usb2phy-reset): '#mux-state-cells' is a required property
arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk-cn15-sd.dtb: usb20phy-reset@15830000 (renesas,r9a09g057-usb2phy-reset): '#mux-state-cells' is a required property
arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk-cn15-sd.dtb: usb21phy-reset@15840000 (renesas,r9a09g057-usb2phy-reset): '#mux-state-cells' is a required property
Fixes: 6a1b6f7e56 ("dt-bindings: reset: renesas,rzv2h-usb2phy: Add '#mux-state-cells' property")
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/22fb9a500cdbc3272dc23cd5e36bca5fbbec75fc.1775575276.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add missing unit address to bus node to fix the following DTC W=1
warning:
arch/arm/boot/dts/renesas/r7s72100.dtsi:40.11-46.4: Warning (unit_address_vs_reg): /bus: node has a reg or ranges property, but no unit name
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260327234244.91707-5-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add missing unit address to bus node to fix the following DTC W=1
warning:
arch/arm/boot/dts/renesas/r8a7792.dtsi:89.12-94.4: Warning (unit_address_vs_reg): /bus: node has a reg or ranges property, but no unit name
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260327234244.91707-4-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add missing unit address to bus node to fix the following DTC W=1
warning:
arch/arm/boot/dts/renesas/r8a7779.dtsi:707.12-712.4: Warning (unit_address_vs_reg): /bus: node has a reg or ranges property, but no unit name
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260327234244.91707-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add missing unit address to bus node to fix the following DTC W=1
warning:
arch/arm/boot/dts/renesas/r8a7778.dtsi:43.12-48.4: Warning (unit_address_vs_reg): /bus: node has a reg or ranges property, but no unit name
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260327234244.91707-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add missing cells and reg DT property in the DU subnode to fix the
following DTC W=1 warning:
arch/arm64/boot/dts/renesas/rz-smarc-du-adv7513.dtsi:29.10-33.5: Warning (unit_address_vs_reg): /fragment@1/__overlay__/ports/port@0: node has a unit name, but no reg or ranges property
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260326042411.215241-5-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add missing cells and reg DT property in the CSI2 subnode to fix the
following DTC W=1 warning:
arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi:49.10-55.5: Warning (unit_address_vs_reg): /fragment@2/__overlay__/ports/port@0: node has a unit name, but no reg or ranges property
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260326042411.215241-4-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add missing cells and reg DT property in the Salvator-X panel DTO to fix
the following DTC W=1 warning:
arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dtso:30.10-34.5: Warning (unit_address_vs_reg): /fragment@2/__overlay__/ports/port@1: node has a unit name, but no reg or ranges property
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260326042411.215241-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add missing cells and reg DT property in the Draak/Ebisu panel DTO to
fix the following DTC W=1 warning:
arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dtso:30.10-34.5: Warning (unit_address_vs_reg): /fragment@2/__overlay__/ports/port@1: node has a unit name, but no reg or ranges property
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260326042411.215241-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The da node block header (xfs_da3_node_hdr) contains a __pad32 field
that should always be zero. Add a check for this during directory and
attribute btree scrubbing.
Since old kernels may have written non-zero padding without issues, flag
this as an optimization opportunity (preen) rather than corruption.
Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
In xfs_zone_gc_mount(), on error, a struct xfs_zone_gc_data allocated
with xfs_zone_gc_data_alloc() is freed with kfree(), however, this
doesn't free the underlying folios or the rmap_irecs.
Use xfs_zone_gc_data_free() to correctly free this memory.
Fixes: 080d01c41d ("xfs: implement zoned garbage collection")
Cc: stable@vger.kernel.org # v6.15
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Currently, the 0th index of the zi_used_bucket_bitmap array is not freed
on error due to the pre-decrement then evaluate semantic of the while
loop used in xfs_alloc_zone_info(). Fix it by allowing for the i == 0
case to be covered.
Fixes: 080d01c41d ("xfs: implement zoned garbage collection")
Cc: stable@vger.kernel.org # v6.15
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Add the missing scrub check for the pad field in directory data block
headers. Old kernels may have written non-zero padding without issue,
and the write path now self-heals stale padding on modification. Flag
non-zero padding as an optimization opportunity (preen) rather than
corruption.
Add xchk_fblock_set_preen helper for reporting file fork block issues
that could be optimized. The trace event xchk_fblock_preen already
exists.
Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Old kernels did not zero the pad field in xfs_dir3_data_hdr when
initializing directory data blocks, so existing filesystems may have
non-zero padding on disk.
Zero the pad field in xfs_dir3_data_write_verify alongside the existing
LSN and checksum updates. The pad field is pure alignment padding with
no runtime meaning, so zeroing it during write verification is safe and
has no additional I/O cost. This lets filesystems gradually self-heal
stale non-zero padding as directories are modified, without requiring an
explicit repair pass.
Suggested-by: Dave Chinner <dgc@kernel.org>
Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_dir3_data_init currently zeroes only the xfs_dir3_blk_hdr portion of
the directory data block header, then manually initializes the bestfree
entries in a loop. This leaves the pad field in xfs_dir3_data_hdr
uninitialized and requires explicit zeroing of each bestfree slot.
Zero the entire header region (geo->data_entry_offset bytes)
unconditionally before setting individual fields. This covers all
current and future header fields, all padding (implicit and explicit),
and the bestfree array, so the manual zeroing loop for bestfree can be
removed.
Suggested-by: Dave Chinner <dgc@kernel.org>
Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
In xfs_refcount_finish_one(), there's no need to pass
XFS_ALLOC_FLAG_FREEING to xfs_alloc_read_agf().
So remove it.
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The qcom pinctrl core supports marking functions that represent GPIO mode
via PINCTRL_GPIO_PINFUNCTION(), so that strict pinmuxing does not reject
GPIO requests for pins that are muxed to the GPIO function.
ipq4019 still describes its gpio function with QCA_PIN_FUNCTION(gpio),
so it is not treated as a GPIO pin function. As a result, GPIO consumers
can still conflict with pinctrl states that select the "gpio" function.
Add a QCA_GPIO_PIN_FUNCTION() helper and use it for the ipq4019 gpio
function, matching how the msm-based qcom drivers handle this.
This allows ipq4019 to keep the GPIO-related pin configuration in DTS
without tripping over strict pinmux ownership checks.
Fixes: cc85cb96e2 ("pinctrl: qcom: make the pinmuxing strict")
Signed-off-by: Til Kaiser <mail@tk154.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
