Add extensive selftests for netkit queue leasing, using io_uring zero
copy test binary inside of a netns with netkit. This checks that memory
providers can be bound against virtual queues in a netkit within a
netns that are leasing from a physical netdev in the default netns.
Also add various test cases around corner cases for the queue creation
itself as well as queue info dumping and teardown in case of netkit in
device pair and single mode.
Signed-off-by: David Wei <dw@davidwei.uk>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20260402231031.447597-15-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test loads xdp_metadata.bpf which calls bpf_xdp_metadata_rx_hash() on
incoming packets. The metadata from that packet is then sent to a BPF
map for validation. It borrows structure from xdp.py, reusing common
functions.
The test checks the device's xdp-rx-metadata-features via netlink
before running and skips on devices that do not advertise hash support.
This can be run on veth devices as well as real hardware.
The test is fairly simple and just verifies that a TCP or UDP packet can be
identified as an L4 flow. This minimal test also passes if run on a veth
device.
Signed-off-by: Chris J Arges <carges@cloudflare.com>
Link: https://patch.msgid.link/20260325201139.2501937-7-carges@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an env NetDrvContEnv for container based selftests. This automates
the setup of a netns, netkit pair with one inside the netns, and a BPF
program that forwards skbs from the NETIF host inside the container.
Currently only netkit is used, but other virtual netdevs e.g. veth can
be used too.
Expect netkit container datapath selftests to have a publicly routable
IP prefix to assign to netkit in a container, such that packets will
land on eth0. The BPF skb forward program will then forward such packets
from the host netns to the container netns.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20260305181803.2912736-4-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Certain tests need a unique set of ports. Successive calls to the
existing rand_port method may return a duplicate port, resulting in test
flakiness. The new helper keeps sockets open while building a list of
ephemeral ports, thus the kernel enforces their uniqueness.
Signed-off-by: Dimitri Daskalakis <dimitri.daskalakis1@gmail.com>
Link: https://patch.msgid.link/20260224224659.1507082-2-dimitri.daskalakis1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pp_alloc_fail.py test (which doesn't run in NIPA CI?) uses tool, add
back the import.
Resolves:
ImportError: cannot import name 'tool' from 'lib.py'
Fixes: 68a052239f ("selftests: drv-net: update remaining Python init files")
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20260105163319.47619-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GenerateTraffic was added to spin up long-running iperf3 load, mainly
to drive high PPS background traffic. It was never meant to provide
stable throughput numbers, and trying to repurpose it for measurement
does not make sense.
Introduce Iperf3Runner to allow tests to split out server/client
configuration, control start/stop, and collect JSON output for
analysis. This makes it possible to measure bandwidth directly when
validating egress shaping.
GenerateTraffic stays as the background load generator, reusing the
common iperf3 helpers under the hood.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-3-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's a lot of cases where we try to re-run the same code with
different parameters. We currently need to either use a generator
method or create a "main" case implementation which then gets called
by trivial case functions:
def _test(x, y, z):
...
def case_int():
_test(1, 2, 3)
def case_str():
_test('a', 'b', 'c')
Add support for variants, similar to kselftests_harness.h and
a lot of other frameworks. Variants can be added as decorator
to test functions:
@ksft_variants([(1, 2, 3), ('a', 'b', 'c')])
def case(x, y, z):
...
ksft_run() will auto-generate case names:
case.1_2_3
case.a_b_c
Because the names may not always be pretty (and to avoid forcing
classes to implement case-friendly __str__()) add a wrapper class
KsftNamedVariant which lets the user specify the name for the variant.
Note that ksft_run's args are still supported. ksft_run splices args
and variant params together.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20251120021024.2944527-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert remaining __init__ files similar to what we did in
commit b615879dbf ("selftests: drv-net: make linters happy with our imports")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tests for making sure device can disappear while associations
exist. This is netdevsim-only since destroying real devices is
more tricky.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-9-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add tests for exercising PSP associations for TCP sockets.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-6-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Simple PSP test to getting info about PSP devices.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-3-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This test suite validates the functionality of the devlink-rate API for
traffic class (TC) bandwidth allocation. It ensures that bandwidth can
be distributed between different traffic classes as configured, and
verifies that explicit TC-to-queue mapping is required for the
allocation to be effective.
The first test (test_no_tc_mapping_bandwidth) is marked as expected
failure on mlx5, since the hardware automatically enforces traffic
class separation by dynamically moving queues to the correct TC
scheduler, even without explicit TC-to-queue mapping configuration.
Test output on mlx5:
1..2
# Created VF interface: eth5
# Created VLAN eth5.101 on eth5 with tc 3 and IP 198.51.100.2
# Created VLAN eth5.102 on eth5 with tc 4 and IP 198.51.100.10
# Set representor eth4 up and added to bridge
# Bandwidth check results without TC mapping:
# TC 3: 0.19 Gbits/sec
# TC 4: 0.76 Gbits/sec
# Total bandwidth: 0.95 Gbits/sec
# TC 3 percentage: 20.0%
# TC 4 percentage: 80.0%
ok 1 devlink_rate_tc_bw.test_no_tc_mapping_bandwidth # XFAIL Bandwidth matched 80/20 split without TC mapping
# Created VF interface: eth5
# Created VLAN eth5.101 on eth5 with tc 3 and IP 198.51.100.2
# Created VLAN eth5.102 on eth5 with tc 4 and IP 198.51.100.10
# Set representor eth4 up and added to bridge
# Bandwidth check results with TC mapping:
# TC 3: 0.21 Gbits/sec
# TC 4: 0.78 Gbits/sec
# Total bandwidth: 0.98 Gbits/sec
# TC 3 percentage: 21.1%
# TC 4 percentage: 78.9%
# Bandwidth is distributed as 80/20 with TC mapping
ok 2 devlink_rate_tc_bw.test_tc_mapping_bandwidth
# Totals: pass:1 fail:0 xfail:1 xpass:0 skip:0 error:0
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250629142138.361537-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pylint doesn't understand our path hacks, and it generates a lot
of warnings for driver tests. Import what we use one by one, this
is hopefully not too tedious and it makes pylint happy.
Link: https://patch.msgid.link/20250621171944.2619249-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Revert fbbf93556f ("selftests: nic_performance: Add selftest for performance of NIC driver")
Revert c087dc5439 ("selftests: nic_link_layer: Add selftest case for speed and duplex states")
Revert 6116075e18 ("selftests: nic_link_layer: Add link layer selftest for NIC driver")
These tests don't clean up after themselves, don't use the disruptive
annotations, don't get included in make install etc. etc. The tests
were added before we have any "HW" runner, so the issues were missed.
Our CI doesn't have any way of excluding broken tests, remove these
for now to stop the random pollution of results due to broken env.
We can always add them back once / if fixed.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250507140109.929801-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace nested double quotes in f-string with outer single quotes.
Fixes: 6116075e18 ("selftests: nic_link_layer: Add link layer selftest for NIC driver")
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20241122064821.2821199-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add selftest file for the link layer tests of a NIC driver.
Test for auto-negotiation is added.
Add LinkConfig class for changing link layer configs.
Selftest makes use of ksft modules and ethtool.
Include selftest file in the Makefile.
Signed-off-by: Mohan Prasad J <mohan.prasad@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We created a separate directory for HW-only tests, recently.
Glue in the Python test library there, Python is a bit annoying
when it comes to using library code located "lower"
in the directory structure.
Reuse the Env class, but let tests require non-nsim setup.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240429144426.743476-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
