When xsend() returns -1 (error), the check 'n < sizeof(buf)' incorrectly
treats it as success due to unsigned promotion. Explicitly check for -1
first.
Fixes: a4b7193d8e ("selftests/bpf: Add sockmap test for redirecting partial skb data")
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Link: https://lore.kernel.org/r/20250612084208.27722-1-wangfushuai@baidu.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test case absent_mark_in_the_middle_state is equivalent of the
following C program:
1: r8 = bpf_get_prandom_u32();
2: r6 = -32;
3: bpf_iter_num_new(&fp[-8], 0, 10);
4: if (unlikely(bpf_get_prandom_u32()))
5: r6 = -31;
6: for (;;) {
7: if (!bpf_iter_num_next(&fp[-8]))
8: break;
9: if (unlikely(bpf_get_prandom_u32()))
10: *(u64 *)(fp + r6) = 7;
11: }
12: bpf_iter_num_destroy(&fp[-8]);
13: return 0;
W/o a fix that instructs verifier to ignore branches count for loop
entries verification proceeds as follows:
- 1-4, state is {r6=-32,fp-8=active};
- 6, checkpoint A is created with {r6=-32,fp-8=active};
- 7, checkpoint B is created with {r6=-32,fp-8=active},
push state {r6=-32,fp-8=active} from 7 to 9;
- 8,12,13, {r6=-32,fp-8=drained}, exit;
- pop state with {r6=-32,fp-8=active} from 7 to 9;
- 9, push state {r6=-32,fp-8=active} from 9 to 10;
- 6, checkpoint C is created with {r6=-32,fp-8=active};
- 7, checkpoint A is hit, no precision propagated for r6 to C;
- pop state {r6=-32,fp-8=active} from 9 to 10;
- 10, state is {r6=-31,fp-8=active}, r6 is marked as read and precise,
these marks are propagated to checkpoints A and B (but not C, as
it is not the parent of current state;
- 6, {r6=-31,fp-8=active} checkpoint C is hit, because r6 is not
marked precise for this checkpoint;
- the program is accepted, despite a possibility of unaligned u64
stack access at offset -31.
The test case absent_mark_in_the_middle_state2 is similar except the
following change:
r8 = bpf_get_prandom_u32();
r6 = -32;
bpf_iter_num_new(&fp[-8], 0, 10);
if (unlikely(bpf_get_prandom_u32())) {
r6 = -31;
+ jump_into_loop:
+ goto +0;
+ goto loop;
+ }
+ if (unlikely(bpf_get_prandom_u32()))
+ goto jump_into_loop;
+ loop:
for (;;) {
if (!bpf_iter_num_next(&fp[-8]))
break;
if (unlikely(bpf_get_prandom_u32()))
*(u64 *)(fp + r6) = 7;
}
bpf_iter_num_destroy(&fp[-8])
return 0
The goal is to check that read/precision marks are propagated to
checkpoint created at 'goto +0' that resides outside of the loop.
The test case absent_mark_in_the_middle_state3 is a bit different and
is equivalent to the C program below:
int absent_mark_in_the_middle_state3(void)
{
bpf_iter_num_new(&fp[-8], 0, 10)
loop1(-32, &fp[-8])
loop1_wrapper(&fp[-8])
bpf_iter_num_destroy(&fp[-8])
}
int loop1(num, iter)
{
while (bpf_iter_num_next(iter)) {
if (unlikely(bpf_get_prandom_u32()))
*(fp + num) = 7;
}
return 0
}
int loop1_wrapper(iter)
{
r6 = -32;
if (unlikely(bpf_get_prandom_u32()))
r6 = -31;
loop1(r6, iter);
return 0;
}
The unsafe state is reached in a similar manner, but the loop is
located inside a subprogram that is called from two locations in the
main subprogram. This detail is important for exercising
bpf_scc_visit->backedges memory management.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250611200836.4135542-11-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
On arm64, the cgroup_mprog_ordering selftest failed with test_progs run
when building with clang compiler. The reason is due to socklen_t optlen
not initialized.
In kernel function do_ip_getsockopt(), we have
if (copy_from_sockptr(&len, optlen, sizeof(int)))
return -EFAULT;
if (len < 0)
return -EINVAL;
The above 'len' variable is a negative value and hence the test failed.
But the test is okay on x86_64. I checked the x86_64 asm code and I didn't
see explicit initialization of 'optlen' but its value is 0 so kernel
didn't return error. This should be a pure luck.
Fix the bug by initializing 'oplen' var properly.
Fixes: e422d5f118 ("selftests/bpf: Add two selftests for mprog API based cgroup progs")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250611162103.1623692-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The selftest can reproduce an issue where using bpf_msg_pop_data() in
ktls causes errors on the receiving end.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20250609020910.397930-3-jiayuan.chen@linux.dev
This is based on the gadget from the description of commit 9183671af6db
("bpf: Fix leakage under speculation on mispredicted branches").
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250603212814.338867-1-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This implements the core of the series and causes the verifier to fall
back to mitigating Spectre v1 using speculation barriers. The approach
was presented at LPC'24 [1] and RAID'24 [2].
If we find any forbidden behavior on a speculative path, we insert a
nospec (e.g., lfence speculation barrier on x86) before the instruction
and stop verifying the path. While verifying a speculative path, we can
furthermore stop verification of that path whenever we encounter a
nospec instruction.
A minimal example program would look as follows:
A = true
B = true
if A goto e
f()
if B goto e
unsafe()
e: exit
There are the following speculative and non-speculative paths
(`cur->speculative` and `speculative` referring to the value of the
push_stack() parameters):
- A = true
- B = true
- if A goto e
- A && !cur->speculative && !speculative
- exit
- !A && !cur->speculative && speculative
- f()
- if B goto e
- B && cur->speculative && !speculative
- exit
- !B && cur->speculative && speculative
- unsafe()
If f() contains any unsafe behavior under Spectre v1 and the unsafe
behavior matches `state->speculative &&
error_recoverable_with_nospec(err)`, do_check() will now add a nospec
before f() instead of rejecting the program:
A = true
B = true
if A goto e
nospec
f()
if B goto e
unsafe()
e: exit
Alternatively, the algorithm also takes advantage of nospec instructions
inserted for other reasons (e.g., Spectre v4). Taking the program above
as an example, speculative path exploration can stop before f() if a
nospec was inserted there because of Spectre v4 sanitization.
In this example, all instructions after the nospec are dead code (and
with the nospec they are also dead code speculatively).
For this, it relies on the fact that speculation barriers generally
prevent all later instructions from executing if the speculation was not
correct:
* On Intel x86_64, lfence acts as full speculation barrier, not only as
a load fence [3]:
An LFENCE instruction or a serializing instruction will ensure that
no later instructions execute, even speculatively, until all prior
instructions complete locally. [...] Inserting an LFENCE instruction
after a bounds check prevents later operations from executing before
the bound check completes.
This was experimentally confirmed in [4].
* On AMD x86_64, lfence is dispatch-serializing [5] (requires MSR
C001_1029[1] to be set if the MSR is supported, this happens in
init_amd()). AMD further specifies "A dispatch serializing instruction
forces the processor to retire the serializing instruction and all
previous instructions before the next instruction is executed" [8]. As
dispatch is not specific to memory loads or branches, lfence therefore
also affects all instructions there. Also, if retiring a branch means
it's PC change becomes architectural (should be), this means any
"wrong" speculation is aborted as required for this series.
* ARM's SB speculation barrier instruction also affects "any instruction
that appears later in the program order than the barrier" [6].
* PowerPC's barrier also affects all subsequent instructions [7]:
[...] executing an ori R31,R31,0 instruction ensures that all
instructions preceding the ori R31,R31,0 instruction have completed
before the ori R31,R31,0 instruction completes, and that no
subsequent instructions are initiated, even out-of-order, until
after the ori R31,R31,0 instruction completes. The ori R31,R31,0
instruction may complete before storage accesses associated with
instructions preceding the ori R31,R31,0 instruction have been
performed
Regarding the example, this implies that `if B goto e` will not execute
before `if A goto e` completes. Once `if A goto e` completes, the CPU
should find that the speculation was wrong and continue with `exit`.
If there is any other path that leads to `if B goto e` (and therefore
`unsafe()`) without going through `if A goto e`, then a nospec will
still be needed there. However, this patch assumes this other path will
be explored separately and therefore be discovered by the verifier even
if the exploration discussed here stops at the nospec.
This patch furthermore has the unfortunate consequence that Spectre v1
mitigations now only support architectures which implement BPF_NOSPEC.
Before this commit, Spectre v1 mitigations prevented exploits by
rejecting the programs on all architectures. Because some JITs do not
implement BPF_NOSPEC, this patch therefore may regress unpriv BPF's
security to a limited extent:
* The regression is limited to systems vulnerable to Spectre v1, have
unprivileged BPF enabled, and do NOT emit insns for BPF_NOSPEC. The
latter is not the case for x86 64- and 32-bit, arm64, and powerpc
64-bit and they are therefore not affected by the regression.
According to commit a6f6a95f25 ("LoongArch, bpf: Fix jit to skip
speculation barrier opcode"), LoongArch is not vulnerable to Spectre
v1 and therefore also not affected by the regression.
* To the best of my knowledge this regression may therefore only affect
MIPS. This is deemed acceptable because unpriv BPF is still disabled
there by default. As stated in a previous commit, BPF_NOSPEC could be
implemented for MIPS based on GCC's speculation_barrier
implementation.
* It is unclear which other architectures (besides x86 64- and 32-bit,
ARM64, PowerPC 64-bit, LoongArch, and MIPS) supported by the kernel
are vulnerable to Spectre v1. Also, it is not clear if barriers are
available on these architectures. Implementing BPF_NOSPEC on these
architectures therefore is non-trivial. Searching GCC and the kernel
for speculation barrier implementations for these architectures
yielded no result.
* If any of those regressed systems is also vulnerable to Spectre v4,
the system was already vulnerable to Spectre v4 attacks based on
unpriv BPF before this patch and the impact is therefore further
limited.
As an alternative to regressing security, one could still reject
programs if the architecture does not emit BPF_NOSPEC (e.g., by removing
the empty BPF_NOSPEC-case from all JITs except for LoongArch where it
appears justified). However, this will cause rejections on these archs
that are likely unfounded in the vast majority of cases.
In the tests, some are now successful where we previously had a
false-positive (i.e., rejection). Change them to reflect where the
nospec should be inserted (using __xlated_unpriv) and modify the error
message if the nospec is able to mitigate a problem that previously
shadowed another problem (in that case __xlated_unpriv does not work,
therefore just add a comment).
Define SPEC_V1 to avoid duplicating this ifdef whenever we check for
nospec insns using __xlated_unpriv, define it here once. This also
improves readability. PowerPC can probably also be added here. However,
omit it for now because the BPF CI currently does not include a test.
Limit it to EPERM, EACCES, and EINVAL (and not everything except for
EFAULT and ENOMEM) as it already has the desired effect for most
real-world programs. Briefly went through all the occurrences of EPERM,
EINVAL, and EACCESS in verifier.c to validate that catching them like
this makes sense.
Thanks to Dustin for their help in checking the vendor documentation.
[1] https://lpc.events/event/18/contributions/1954/ ("Mitigating
Spectre-PHT using Speculation Barriers in Linux eBPF")
[2] https://arxiv.org/pdf/2405.00078 ("VeriFence: Lightweight and
Precise Spectre Defenses for Untrusted Linux Kernel Extensions")
[3] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/runtime-speculative-side-channel-mitigations.html
("Managed Runtime Speculative Execution Side Channel Mitigations")
[4] https://dl.acm.org/doi/pdf/10.1145/3359789.3359837 ("Speculator: a
tool to analyze speculative execution attacks and mitigations" -
Section 4.6 "Stopping Speculative Execution")
[5] https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/programmer-references/software-techniques-for-managing-speculation.pdf
("White Paper - SOFTWARE TECHNIQUES FOR MANAGING SPECULATION ON AMD
PROCESSORS - REVISION 5.09.23")
[6] https://developer.arm.com/documentation/ddi0597/2020-12/Base-Instructions/SB--Speculation-Barrier-
("SB - Speculation Barrier - Arm Armv8-A A32/T32 Instruction Set
Architecture (2020-12)")
[7] https://wiki.raptorcs.com/w/images/5/5f/OPF_PowerISA_v3.1C.pdf
("Power ISA™ - Version 3.1C - May 26, 2024 - Section 9.2.1 of Book
III")
[8] https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/programmer-references/40332.pdf
("AMD64 Architecture Programmer’s Manual Volumes 1–5 - Revision 4.08
- April 2024 - 7.6.4 Serializing Instructions")
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Henriette Herzog <henriette.herzog@rub.de>
Cc: Dustin Nguyen <nguyen@cs.fau.de>
Cc: Maximilian Ott <ott@cs.fau.de>
Cc: Milan Stephan <milan.stephan@fau.de>
Link: https://lore.kernel.org/r/20250603212428.338473-1-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A test requires the following to happen:
* CONST_PTR_TO_MAP value is checked for null
* the code in the null branch fails verification
Add test cases:
* direct global map_ptr comparison to null
* lookup inner map, then two checks (the first transforms
map_value_or_null into map_ptr)
* lookup inner map, spill-fill it, then check for null
* use an array of ringbufs to recreate a common coding pattern [1]
[1] https://lore.kernel.org/bpf/CAEf4BzZNU0gX_sQ8k8JaLe1e+Veth3Rk=4x7MDhv=hQxvO8EDw@mail.gmail.com/
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ihor Solodrai <isolodrai@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250609183024.359974-4-isolodrai@meta.com
Add a test for CONST_PTR_TO_MAP comparison with a non-0 constant. A
BPF program with this code must not pass verification in unpriv.
Signed-off-by: Ihor Solodrai <isolodrai@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250609183024.359974-3-isolodrai@meta.com
When reg->type is CONST_PTR_TO_MAP, it can not be null. However the
verifier explores the branches under rX == 0 in check_cond_jmp_op()
even if reg->type is CONST_PTR_TO_MAP, because it was not checked for
in reg_not_null().
Fix this by adding CONST_PTR_TO_MAP to the set of types that are
considered non nullable in reg_not_null().
An old "unpriv: cmp map pointer with zero" selftest fails with this
change, because now early out correctly triggers in
check_cond_jmp_op(), making the verification to pass.
In practice verifier may allow pointer to null comparison in unpriv,
since in many cases the relevant branch and comparison op are removed
as dead code. So change the expected test result to __success_unpriv.
Signed-off-by: Ihor Solodrai <isolodrai@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250609183024.359974-2-isolodrai@meta.com
Move static inline functions id_from_prog_fd() and id_from_link_fd()
from prog_tests/tc_helpers.h to test_progs.h so these two functions
can be reused for later cgroup mprog selftests.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250606163151.2429325-1-yonghong.song@linux.dev
The ringbuf max_entries must be PAGE_ALIGNED. See kernel function
ringbuf_map_alloc(). So for arm64 64KB page size, adjust max_entries
properly.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250607013626.1553001-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The ringbuf max_entries must be PAGE_ALIGNED. See kernel function
ringbuf_map_alloc(). So for arm64 64KB page size, adjust max_entries
and other related metrics properly.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250607013621.1552332-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, uffd_register.range.len is set to 4096 for command
'ioctl(uffd, UFFDIO_REGISTER, &uffd_register)'. For arm64 64KB page size,
the len must be 64KB size aligned as page size alignment is required.
See fs/userfaultfd.c:validate_unaligned_range().
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250607013615.1551783-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For selftest xdp_adjust_tail/xdp_adjust_frags_tail_grow, if tested failure,
I see a long list of log output like
...
test_xdp_adjust_frags_tail_grow:PASS:9Kb+10b-untouched 0 nsec
test_xdp_adjust_frags_tail_grow:PASS:9Kb+10b-untouched 0 nsec
test_xdp_adjust_frags_tail_grow:PASS:9Kb+10b-untouched 0 nsec
test_xdp_adjust_frags_tail_grow:PASS:9Kb+10b-untouched 0 nsec
...
There are total 7374 lines of the above which is too much. Let us
only issue such logs when it is an assert failure.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250607013610.1551399-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Within __add_three() function, should use function parameters instead of
global variables. So that the variables groot_nested.inner.root and
groot_nested.inner.glock in rbtree_add_nodes_nested() are tested
correctly.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Link: https://lore.kernel.org/r/tencent_3DD7405C0839EBE2724AC5FA357B5402B105@qq.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When this mode is turned on, "emit_zeroes" and "compact" have no effect,
and embedded NUL characters always terminate printing of an array.
Signed-off-by: Blake Jones <blakejones@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250603203701.520541-2-blakejones@google.com
Ihor Solodrai reported selftest 'btf_tag/btf_type_tag_percpu_vmlinux_helper'
failure ([1]) during 6.16 merge window. The failure log:
...
7: (15) if r0 == 0x0 goto pc+1 ; R0=ptr_css_rstat_cpu()
; *(volatile int *)rstat; @ btf_type_tag_percpu.c:68
8: (61) r1 = *(u32 *)(r0 +0)
cannot access ptr member updated_children with moff 0 in struct css_rstat_cpu with off 0 size 4
Two changes are needed. First, 'struct cgroup_rstat_cpu' needs to be
replaced with 'struct css_rstat_cpu' to be consistent with new data
structure. Second, layout of 'css_rstat_cpu' is changed compared
to 'cgroup_rstat_cpu'. The first member becomes a pointer so
the bpf prog needs to do 8-byte load instead of 4-byte load.
[1] https://lore.kernel.org/bpf/6f688f2e-7d26-423a-9029-d1b1ef1c938a@linux.dev/
Cc: Ihor Solodrai <ihor.solodrai@linux.dev>
Cc: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: JP Kobryn <inwardvessel@gmail.com>
Link: https://lore.kernel.org/r/20250529201151.1787575-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
On linux-next, build for bpf selftest displays an error due to
mismatch in the expected function signature of bpf_testmod_test_read
and bpf_testmod_test_write.
Commit 97d06802d1 ("sysfs: constify bin_attribute argument of bin_attribute::read/write()")
changed the required type for struct bin_attribute to const struct bin_attribute.
To resolve the error, update corresponding signature for the callback.
Fixes: 97d06802d1 ("sysfs: constify bin_attribute argument of bin_attribute::read/write()")
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Closes: https://lore.kernel.org/all/e915da49-2b9a-4c4c-a34f-877f378129f6@linux.ibm.com/
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Link: https://lore.kernel.org/r/20250512091108.2015615-1-skb99@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Have module addresses get updated in the persistent ring buffer
The addresses of the modules from the previous boot are saved in the
persistent ring buffer. If the same modules are loaded and an address is
in the old buffer points to an address that was both saved in the
persistent ring buffer and is loaded in memory, shift the address to point
to the address that is loaded in memory in the trace event.
- Print function names for irqs off and preempt off callsites
When ignoring the print fmt of a trace event and just printing the fields
directly, have the fields for preempt off and irqs off events still show
the function name (via kallsyms) instead of just showing the raw address.
- Clean ups of the histogram code
The histogram functions saved over 800 bytes on the stack to process
events as they come in. Instead, create per-cpu buffers that can hold this
information and have a separate location for each context level (thread,
softirq, IRQ and NMI).
Also add some more comments to the code.
- Add "common_comm" field for histograms
Add "common_comm" that uses the current->comm as a field in an event
histogram and acts like any of the other fields of the event.
- Show "subops" in the enabled_functions file
When the function graph infrastructure is used, a subsystem has a "subops"
that it attaches its callback function to. Instead of the
enabled_functions just showing a function calling the function that calls
the subops functions, also show the subops functions that will get called
for that function too.
- Add "copy_trace_marker" option to instances
There are cases where an instance is created for tooling to write into,
but the old tooling has the top level instance hardcoded into the
application. New tools want to consume the data from an instance and not
the top level buffer. By adding a copy_trace_marker option, whenever the
top instance trace_marker is written into, a copy of it is also written
into the instance with this option set. This allows new tools to read what
old tools are writing into the top buffer.
If this option is cleared by the top instance, then what is written into
the trace_marker is not written into the top instance. This is a way to
redirect the trace_marker writes into another instance.
- Have tracepoints created by DECLARE_TRACE() use trace_<name>_tp()
If a tracepoint is created by DECLARE_TRACE() instead of TRACE_EVENT(),
then it will not be exposed via tracefs. Currently there's no way to
differentiate in the kernel the tracepoint functions between those that
are exposed via tracefs or not. A calling convention has been made
manually to append a "_tp" prefix for events created by DECLARE_TRACE().
Instead of doing this manually, force it so that all DECLARE_TRACE()
events have this notation.
- Use __string() for task->comm in some sched events
Instead of hardcoding the comm to be TASK_COMM_LEN in some of the
scheduler events use __string() which makes it dynamic. Note, if these
events are parsed by user space it they may break, and the event may have
to be converted back to the hardcoded size.
- Have function graph "depth" be unsigned to the user
Internally to the kernel, the "depth" field of the function graph event is
signed due to -1 being used for end of boundary. What actually gets
recorded in the event itself is zero or positive. Reflect this to user
space by showing "depth" as unsigned int and be consistent across all
events.
- Allow an arbitrary long CPU string to osnoise_cpus_write()
The filtering of which CPUs to write to can exceed 256 bytes. If a machine
has 256 CPUs, and the filter is to filter every other CPU, the write would
take a string larger than 256 bytes. Instead of using a fixed size buffer
on the stack that is 256 bytes, allocate it to handle what is passed in.
- Stop having ftrace check the per-cpu data "disabled" flag
The "disabled" flag in the data structure passed to most ftrace functions
is checked to know if tracing has been disabled or not. This flag was
added back in 2008 before the ring buffer had its own way to disable
tracing. The "disable" flag is now not always set when needed, and the
ring buffer flag should be used in all locations where the disabled is
needed. Since the "disable" flag is redundant and incorrect, stop using it.
Fix up some locations that use the "disable" flag to use the ring buffer
info.
- Use a new tracer_tracing_disable/enable() instead of data->disable flag
There's a few cases that set the data->disable flag to stop tracing, but
this flag is not consistently used. It is also an on/off switch where if a
function set it and calls another function that sets it, the called
function may incorrectly enable it.
Use a new trace_tracing_disable() and tracer_tracing_enable() that uses a
counter and can be nested. These use the ring buffer flags which are
always checked making the disabling more consistent.
- Save the trace clock in the persistent ring buffer
Save what clock was used for tracing in the persistent ring buffer and set
it back to that clock after a reboot.
- Remove unused reference to a per CPU data pointer in mmiotrace functions
- Remove unused buffer_page field from trace_array_cpu structure
- Remove more strncpy() instances
- Other minor clean ups and fixes
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaDhiqRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qkheAQDpyRHoXF1AIoEqyahDax8f3vpZQeCH
B/mn+YJmU1wuVgEA7AFALov5SHKv4IzoARz68GXtR0jGhP5D8uebUhUqDAQ=
=WmFG
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Have module addresses get updated in the persistent ring buffer
The addresses of the modules from the previous boot are saved in the
persistent ring buffer. If the same modules are loaded and an address
is in the old buffer points to an address that was both saved in the
persistent ring buffer and is loaded in memory, shift the address to
point to the address that is loaded in memory in the trace event.
- Print function names for irqs off and preempt off callsites
When ignoring the print fmt of a trace event and just printing the
fields directly, have the fields for preempt off and irqs off events
still show the function name (via kallsyms) instead of just showing
the raw address.
- Clean ups of the histogram code
The histogram functions saved over 800 bytes on the stack to process
events as they come in. Instead, create per-cpu buffers that can hold
this information and have a separate location for each context level
(thread, softirq, IRQ and NMI).
Also add some more comments to the code.
- Add "common_comm" field for histograms
Add "common_comm" that uses the current->comm as a field in an event
histogram and acts like any of the other fields of the event.
- Show "subops" in the enabled_functions file
When the function graph infrastructure is used, a subsystem has a
"subops" that it attaches its callback function to. Instead of the
enabled_functions just showing a function calling the function that
calls the subops functions, also show the subops functions that will
get called for that function too.
- Add "copy_trace_marker" option to instances
There are cases where an instance is created for tooling to write
into, but the old tooling has the top level instance hardcoded into
the application. New tools want to consume the data from an instance
and not the top level buffer. By adding a copy_trace_marker option,
whenever the top instance trace_marker is written into, a copy of it
is also written into the instance with this option set. This allows
new tools to read what old tools are writing into the top buffer.
If this option is cleared by the top instance, then what is written
into the trace_marker is not written into the top instance. This is a
way to redirect the trace_marker writes into another instance.
- Have tracepoints created by DECLARE_TRACE() use trace_<name>_tp()
If a tracepoint is created by DECLARE_TRACE() instead of
TRACE_EVENT(), then it will not be exposed via tracefs. Currently
there's no way to differentiate in the kernel the tracepoint
functions between those that are exposed via tracefs or not. A
calling convention has been made manually to append a "_tp" prefix
for events created by DECLARE_TRACE(). Instead of doing this
manually, force it so that all DECLARE_TRACE() events have this
notation.
- Use __string() for task->comm in some sched events
Instead of hardcoding the comm to be TASK_COMM_LEN in some of the
scheduler events use __string() which makes it dynamic. Note, if
these events are parsed by user space it they may break, and the
event may have to be converted back to the hardcoded size.
- Have function graph "depth" be unsigned to the user
Internally to the kernel, the "depth" field of the function graph
event is signed due to -1 being used for end of boundary. What
actually gets recorded in the event itself is zero or positive.
Reflect this to user space by showing "depth" as unsigned int and be
consistent across all events.
- Allow an arbitrary long CPU string to osnoise_cpus_write()
The filtering of which CPUs to write to can exceed 256 bytes. If a
machine has 256 CPUs, and the filter is to filter every other CPU,
the write would take a string larger than 256 bytes. Instead of using
a fixed size buffer on the stack that is 256 bytes, allocate it to
handle what is passed in.
- Stop having ftrace check the per-cpu data "disabled" flag
The "disabled" flag in the data structure passed to most ftrace
functions is checked to know if tracing has been disabled or not.
This flag was added back in 2008 before the ring buffer had its own
way to disable tracing. The "disable" flag is now not always set when
needed, and the ring buffer flag should be used in all locations
where the disabled is needed. Since the "disable" flag is redundant
and incorrect, stop using it. Fix up some locations that use the
"disable" flag to use the ring buffer info.
- Use a new tracer_tracing_disable/enable() instead of data->disable
flag
There's a few cases that set the data->disable flag to stop tracing,
but this flag is not consistently used. It is also an on/off switch
where if a function set it and calls another function that sets it,
the called function may incorrectly enable it.
Use a new trace_tracing_disable() and tracer_tracing_enable() that
uses a counter and can be nested. These use the ring buffer flags
which are always checked making the disabling more consistent.
- Save the trace clock in the persistent ring buffer
Save what clock was used for tracing in the persistent ring buffer
and set it back to that clock after a reboot.
- Remove unused reference to a per CPU data pointer in mmiotrace
functions
- Remove unused buffer_page field from trace_array_cpu structure
- Remove more strncpy() instances
- Other minor clean ups and fixes
* tag 'trace-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (36 commits)
tracing: Fix compilation warning on arm32
tracing: Record trace_clock and recover when reboot
tracing/sched: Use __string() instead of fixed lengths for task->comm
tracepoint: Have tracepoints created with DECLARE_TRACE() have _tp suffix
tracing: Cleanup upper_empty() in pid_list
tracing: Allow the top level trace_marker to write into another instances
tracing: Add a helper function to handle the dereference arg in verifier
tracing: Remove unnecessary "goto out" that simply returns ret is trigger code
tracing: Fix error handling in event_trigger_parse()
tracing: Rename event_trigger_alloc() to trigger_data_alloc()
tracing: Replace deprecated strncpy() with strscpy() for stack_trace_filter_buf
tracing: Remove unused buffer_page field from trace_array_cpu structure
tracing: Use atomic_inc_return() for updating "disabled" counter in irqsoff tracer
tracing: Convert the per CPU "disabled" counter to local from atomic
tracing: branch: Use trace_tracing_is_on_cpu() instead of "disabled" field
ring-buffer: Add ring_buffer_record_is_on_cpu()
tracing: Do not use per CPU array_buffer.data->disabled for cpumask
ftrace: Do not disabled function graph based on "disabled" field
tracing: kdb: Use tracer_tracing_on/off() instead of setting per CPU disabled
tracing: Use tracer_tracing_disable() instead of "disabled" field for ftrace_dump_one()
...
-----BEGIN PGP SIGNATURE-----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=j3t8
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Fix and improve BTF deduplication of identical BTF types (Alan
Maguire and Andrii Nakryiko)
- Support up to 12 arguments in BPF trampoline on arm64 (Xu Kuohai and
Alexis Lothoré)
- Support load-acquire and store-release instructions in BPF JIT on
riscv64 (Andrea Parri)
- Fix uninitialized values in BPF_{CORE,PROBE}_READ macros (Anton
Protopopov)
- Streamline allowed helpers across program types (Feng Yang)
- Support atomic update for hashtab of BPF maps (Hou Tao)
- Implement json output for BPF helpers (Ihor Solodrai)
- Several s390 JIT fixes (Ilya Leoshkevich)
- Various sockmap fixes (Jiayuan Chen)
- Support mmap of vmlinux BTF data (Lorenz Bauer)
- Support BPF rbtree traversal and list peeking (Martin KaFai Lau)
- Tests for sockmap/sockhash redirection (Michal Luczaj)
- Introduce kfuncs for memory reads into dynptrs (Mykyta Yatsenko)
- Add support for dma-buf iterators in BPF (T.J. Mercier)
- The verifier support for __bpf_trap() (Yonghong Song)
* tag 'bpf-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (135 commits)
bpf, arm64: Remove unused-but-set function and variable.
selftests/bpf: Add tests with stack ptr register in conditional jmp
bpf: Do not include stack ptr register in precision backtracking bookkeeping
selftests/bpf: enable many-args tests for arm64
bpf, arm64: Support up to 12 function arguments
bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem()
bpf: Avoid __bpf_prog_ret0_warn when jit fails
bpftool: Add support for custom BTF path in prog load/loadall
selftests/bpf: Add unit tests with __bpf_trap() kfunc
bpf: Warn with __bpf_trap() kfunc maybe due to uninitialized variable
bpf: Remove special_kfunc_set from verifier
selftests/bpf: Add test for open coded dmabuf_iter
selftests/bpf: Add test for dmabuf_iter
bpf: Add open coded dmabuf iterator
bpf: Add dmabuf iterator
dma-buf: Rename debugfs symbols
bpf: Fix error return value in bpf_copy_from_user_dynptr
libbpf: Use mmap to parse vmlinux BTF from sysfs
selftests: bpf: Add a test for mmapable vmlinux BTF
btf: Allow mmap of vmlinux btf
...
Core
----
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing
again the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter
---------
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools
still use this interface.
- Implement support for wildcard netdevice in netdev basechain
and flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF
---
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols
---------
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the single
flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API
----------
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling
-----------------
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers
----------------------
- OpenVPN virtual driver: offload OpenVPN data channels processing
to the kernel-space, increasing the data transfer throughput WRT
the user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers
-------
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the stearing table handling to reduce significantly
the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=t/Tz
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
- cgroup rstat shared the tracking tree across all controlers with the
rationale being that a cgroup which is using one resource is likely to be
using other resources at the same time (ie. if something is allocating
memory, it's probably consuming CPU cycles). However, this turned out to
not scale very well especially with memcg using rstat for internal
operations which made memcg stat read and flush patterns substantially
different from other controllers. JP Kobryn split the rstat tree per
controller.
- cgroup BPF support was hooking into cgroup init/exit paths directly.
Convert them to use a notifier chain instead so that other usages can be
added easily. The two of the patches which implement this are mislabeled
as belonging to sched_ext instead of cgroup. Sorry.
- Relatively minor cpuset updates.
- Documentation updates.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaDYUmA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGRhbAP90v8QwUkWEKGQSam8JY3by7PvrW6pV5ot+BGuM
4xu3BAEAjsJ9FdiwYLwKYqG7y59xhhBFOo6GpcP52kPp3znl+QQ=
=6MIT
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cgroup rstat shared the tracking tree across all controllers with the
rationale being that a cgroup which is using one resource is likely
to be using other resources at the same time (ie. if something is
allocating memory, it's probably consuming CPU cycles).
However, this turned out to not scale very well especially with memcg
using rstat for internal operations which made memcg stat read and
flush patterns substantially different from other controllers. JP
Kobryn split the rstat tree per controller.
- cgroup BPF support was hooking into cgroup init/exit paths directly.
Convert them to use a notifier chain instead so that other usages can
be added easily. The two of the patches which implement this are
mislabeled as belonging to sched_ext instead of cgroup. Sorry.
- Relatively minor cpuset updates
- Documentation updates
* tag 'cgroup-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (23 commits)
sched_ext: Convert cgroup BPF support to use cgroup_lifetime_notifier
sched_ext: Introduce cgroup_lifetime_notifier
cgroup: Minor reorganization of cgroup_create()
cgroup, docs: cpu controller's interaction with various scheduling policies
cgroup, docs: convert space indentation to tab indentation
cgroup: avoid per-cpu allocation of size zero rstat cpu locks
cgroup, docs: be specific about bandwidth control of rt processes
cgroup: document the rstat per-cpu initialization
cgroup: helper for checking rstat participation of css
cgroup: use subsystem-specific rstat locks to avoid contention
cgroup: use separate rstat trees for each subsystem
cgroup: compare css to cgroup::self in helper for distingushing css
cgroup: warn on rstat usage by early init subsystems
cgroup/cpuset: drop useless cpumask_empty() in compute_effective_exclusive_cpumask()
cgroup/rstat: Improve cgroup_rstat_push_children() documentation
cgroup: fix goto ordering in cgroup_init()
cgroup: fix pointer check in css_rstat_init()
cgroup/cpuset: Add warnings to catch inconsistency in exclusive CPUs
cgroup/cpuset: Fix obsolete comment in cpuset_css_offline()
cgroup/cpuset: Always use cpu_active_mask
...
Add two tests:
- one test has 'rX <op> r10' where rX is not r10, and
- another test has 'rX <op> rY' where rX and rY are not r10
but there is an early insn 'rX = r10'.
Without previous verifier change, both tests will fail.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250524041340.4046304-1-yonghong.song@linux.dev
Now that support for up to 12 args is enabled for tracing programs on
ARM64, enable the existing tests for this feature on this architecture.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20250527-many_args_arm64-v3-2-3faf7bb8e4a2@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add some inline-asm tests and C tests where __bpf_trap() or
__builtin_trap() is used in the code. The __builtin_trap()
test is guarded with llvm21 ([1]) since otherwise the compilation
failure will happen.
[1] https://github.com/llvm/llvm-project/pull/131731
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250523205331.1291734-1-yonghong.song@linux.dev
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use the same test buffers as the traditional iterator and a new BPF map
to verify the test buffers can be found with the open coded dmabuf
iterator.
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250522230429.941193-6-tjmercier@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This test creates a udmabuf, and a dmabuf from the system dmabuf heap,
and uses a BPF program that prints dmabuf metadata with the new
dmabuf_iter to verify they can be found.
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250522230429.941193-5-tjmercier@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Core & generic-arch updates:
- Add support for dynamic constraints and propagate it to
the Intel driver (Kan Liang)
- Fix & enhance driver-specific throttling support (Kan Liang)
- Record sample last_period before updating on the
x86 and PowerPC platforms (Mark Barnett)
- Make perf_pmu_unregister() usable (Peter Zijlstra)
- Unify perf_event_free_task() / perf_event_exit_task_context()
(Peter Zijlstra)
- Simplify perf_event_release_kernel() and perf_event_free_task()
(Peter Zijlstra)
- Allocate non-contiguous AUX pages by default (Yabin Cui)
Uprobes updates:
- Add support to emulate NOP instructions (Jiri Olsa)
- selftests/bpf: Add 5-byte NOP uprobe trigger benchmark (Jiri Olsa)
x86 Intel PMU enhancements:
- Support Intel Auto Counter Reload [ACR] (Kan Liang)
- Add PMU support for Clearwater Forest (Dapeng Mi)
- Arch-PEBS preparatory changes: (Dapeng Mi)
- Parse CPUID archPerfmonExt leaves for non-hybrid CPUs
- Decouple BTS initialization from PEBS initialization
- Introduce pairs of PEBS static calls
x86 AMD PMU enhancements:
- Use hrtimer for handling overflows in the AMD uncore driver
(Sandipan Das)
- Prevent UMC counters from saturating (Sandipan Das)
Fixes and cleanups:
- Fix put_ctx() ordering (Frederic Weisbecker)
- Fix irq work dereferencing garbage (Frederic Weisbecker)
- Misc fixes and cleanups (Changbin Du, Frederic Weisbecker,
Ian Rogers, Ingo Molnar, Kan Liang, Peter Zijlstra, Qing Wang,
Sandipan Das, Thorsten Blum)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmgy4zoRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1j6QRAAvQ4GBPrdJLb8oXkLjCmWSp9PfM1h2IW0
reUrcV0BPRAwz4T60QEU2KyiEjvKxNghR6bNw4i3slAZ8EFwP9eWE/0ZYOo5+W/N
wv8vsopv/oZd2L2G5TgxDJf+tLPkqnTvp651LmGAbquPFONN1lsya9UHVPnt2qtv
fvFhjW6D828VoevRcUCsdoEUNlFDkUYQ2c3M1y5H2AI6ILDVxLsp5uYtuVUP+2lQ
7UI/elqRIIblTGT7G9LvTGiXZMm8T58fe1OOLekT6NdweJ3XEt1kMdFo/SCRYfzU
eDVVVLSextZfzBXNPtAEAlM3aSgd8+4m5sACiD1EeOUNjo5J9Sj1OOCa+bZGF/Rl
XNv5Kcp6Kh1T4N5lio8DE/NabmHDqDMbUGfud+VTS8uLLku4kuOWNMxJTD1nQ2Zz
BMfJhP89G9Vk07F9fOGuG1N6mKhIKNOgXh0S92tB7XDHcdJegueu2xh4ZszBL1QK
JVXa4DbnDj+y0LvnV+A5Z6VILr5RiCAipDb9ascByPja6BbN10Nf9Aj4nWwRTwbO
ut5OK/fDKmSjEHn1+a42d4iRxdIXIWhXCyxEhH+hJXEFx9htbQ3oAbXAEedeJTlT
g9QYGAjL96QEd0CqviorV8KyU59nVkEPoLVCumXBZ0WWhNwU6GdAmsW1hLfxQdLN
sp+XHhfxf8M=
=tPRs
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
"Core & generic-arch updates:
- Add support for dynamic constraints and propagate it to the Intel
driver (Kan Liang)
- Fix & enhance driver-specific throttling support (Kan Liang)
- Record sample last_period before updating on the x86 and PowerPC
platforms (Mark Barnett)
- Make perf_pmu_unregister() usable (Peter Zijlstra)
- Unify perf_event_free_task() / perf_event_exit_task_context()
(Peter Zijlstra)
- Simplify perf_event_release_kernel() and perf_event_free_task()
(Peter Zijlstra)
- Allocate non-contiguous AUX pages by default (Yabin Cui)
Uprobes updates:
- Add support to emulate NOP instructions (Jiri Olsa)
- selftests/bpf: Add 5-byte NOP uprobe trigger benchmark (Jiri Olsa)
x86 Intel PMU enhancements:
- Support Intel Auto Counter Reload [ACR] (Kan Liang)
- Add PMU support for Clearwater Forest (Dapeng Mi)
- Arch-PEBS preparatory changes: (Dapeng Mi)
- Parse CPUID archPerfmonExt leaves for non-hybrid CPUs
- Decouple BTS initialization from PEBS initialization
- Introduce pairs of PEBS static calls
x86 AMD PMU enhancements:
- Use hrtimer for handling overflows in the AMD uncore driver
(Sandipan Das)
- Prevent UMC counters from saturating (Sandipan Das)
Fixes and cleanups:
- Fix put_ctx() ordering (Frederic Weisbecker)
- Fix irq work dereferencing garbage (Frederic Weisbecker)
- Misc fixes and cleanups (Changbin Du, Frederic Weisbecker, Ian
Rogers, Ingo Molnar, Kan Liang, Peter Zijlstra, Qing Wang, Sandipan
Das, Thorsten Blum)"
* tag 'perf-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
perf/headers: Clean up <linux/perf_event.h> a bit
perf/uapi: Clean up <uapi/linux/perf_event.h> a bit
perf/uapi: Fix PERF_RECORD_SAMPLE comments in <uapi/linux/perf_event.h>
mips/perf: Remove driver-specific throttle support
xtensa/perf: Remove driver-specific throttle support
sparc/perf: Remove driver-specific throttle support
loongarch/perf: Remove driver-specific throttle support
csky/perf: Remove driver-specific throttle support
arc/perf: Remove driver-specific throttle support
alpha/perf: Remove driver-specific throttle support
perf/apple_m1: Remove driver-specific throttle support
perf/arm: Remove driver-specific throttle support
s390/perf: Remove driver-specific throttle support
powerpc/perf: Remove driver-specific throttle support
perf/x86/zhaoxin: Remove driver-specific throttle support
perf/x86/amd: Remove driver-specific throttle support
perf/x86/intel: Remove driver-specific throttle support
perf: Only dump the throttle log for the leader
perf: Fix the throttle logic for a group
perf/core: Add the is_event_in_freq_mode() helper to simplify the code
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaDBPTwAKCRCRxhvAZXjc
om0+AQDMxKLweJXplqQQ7jxuvW2dEa60YpE2EalEKWGg9YA3KgEA3nI4kyKMKn7Y
PRFXgIcKvhs62oJLKsq8SGQUqExqvAE=
=atEw
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.16-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual selections of misc updates for this cycle.
Features:
- Use folios for symlinks in the page cache
FUSE already uses folios for its symlinks. Mirror that conversion
in the generic code and the NFS code. That lets us get rid of a few
folio->page->folio conversions in this path, and some of the few
remaining users of read_cache_page() / read_mapping_page()
- Try and make a few filesystem operations killable on the VFS
inode->i_mutex level
- Add sysctl vfs_cache_pressure_denom for bulk file operations
Some workloads need to preserve more dentries than we currently
allow through out sysctl interface
A HDFS servers with 12 HDDs per server, on a HDFS datanode startup
involves scanning all files and caching their metadata (including
dentries and inodes) in memory. Each HDD contains approximately 2
million files, resulting in a total of ~20 million cached dentries
after initialization
To minimize dentry reclamation, they set vfs_cache_pressure to 1.
Despite this configuration, memory pressure conditions can still
trigger reclamation of up to 50% of cached dentries, reducing the
cache from 20 million to approximately 10 million entries. During
the subsequent cache rebuild period, any HDFS datanode restart
operation incurs substantial latency penalties until full cache
recovery completes
To maintain service stability, more dentries need to be preserved
during memory reclamation. The current minimum reclaim ratio (1/100
of total dentries) remains too aggressive for such workload. This
patch introduces vfs_cache_pressure_denom for more granular cache
pressure control
The configuration [vfs_cache_pressure=1,
vfs_cache_pressure_denom=10000] effectively maintains the full 20
million dentry cache under memory pressure, preventing datanode
restart performance degradation
- Avoid some jumps in inode_permission() using likely()/unlikely()
- Avid a memory access which is most likely a cache miss when
descending into devcgroup_inode_permission()
- Add fastpath predicts for stat() and fdput()
- Anonymous inodes currently don't come with a proper mode causing
issues in the kernel when we want to add useful VFS debug assert.
Fix that by giving them a proper mode and masking it off when we
report it to userspace which relies on them not having any mode
- Anonymous inodes currently allow to change inode attributes because
the VFS falls back to simple_setattr() if i_op->setattr isn't
implemented. This means the ownership and mode for every single
user of anon_inode_inode can be changed. Block that as it's either
useless or actively harmful. If specific ownership is needed the
respective subsystem should allocate anonymous inodes from their
own private superblock
- Raise SB_I_NODEV and SB_I_NOEXEC on the anonymous inode superblock
- Add proper tests for anonymous inode behavior
- Make it easy to detect proper anonymous inodes and to ensure that
we can detect them in codepaths such as readahead()
Cleanups:
- Port pidfs to the new anon_inode_{g,s}etattr() helpers
- Try to remove the uselib() system call
- Add unlikely branch hint return path for poll
- Add unlikely branch hint on return path for core_sys_select
- Don't allow signals to interrupt getdents copying for fuse
- Provide a size hint to dir_context for during readdir()
- Use writeback_iter directly in mpage_writepages
- Update compression and mtime descriptions in initramfs
documentation
- Update main netfs API document
- Remove useless plus one in super_cache_scan()
- Remove unnecessary NULL-check guards during setns()
- Add separate separate {get,put}_cgroup_ns no-op cases
Fixes:
- Fix typo in root= kernel parameter description
- Use KERN_INFO for infof()|info_plog()|infofc()
- Correct comments of fs_validate_description()
- Mark an unlikely if condition with unlikely() in
vfs_parse_monolithic_sep()
- Delete macro fsparam_u32hex()
- Remove unused and problematic validate_constant_table()
- Fix potential unsigned integer underflow in fs_name()
- Make file-nr output the total allocated file handles"
* tag 'vfs-6.16-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (43 commits)
fs: Pass a folio to page_put_link()
nfs: Use a folio in nfs_get_link()
fs: Convert __page_get_link() to use a folio
fs/read_write: make default_llseek() killable
fs/open: make do_truncate() killable
fs/open: make chmod_common() and chown_common() killable
include/linux/fs.h: add inode_lock_killable()
readdir: supply dir_context.count as readdir buffer size hint
vfs: Add sysctl vfs_cache_pressure_denom for bulk file operations
fuse: don't allow signals to interrupt getdents copying
Documentation: fix typo in root= kernel parameter description
include/cgroup: separate {get,put}_cgroup_ns no-op case
kernel/nsproxy: remove unnecessary guards
fs: use writeback_iter directly in mpage_writepages
fs: remove useless plus one in super_cache_scan()
fs: add S_ANON_INODE
fs: remove uselib() system call
device_cgroup: avoid access to ->i_rdev in the common case in devcgroup_inode_permission()
fs/fs_parse: Remove unused and problematic validate_constant_table()
fs: touch up predicts in inode_permission()
...
Add a basic test for the ability to mmap /sys/kernel/btf/vmlinux.
Ensure that the data is valid BTF and that it is padded with zero.
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20250520-vmlinux-mmap-v5-2-e8c941acc414@isovalent.com
sk->sk_txrehash is only used for TCP.
Let's restrict SO_TXREHASH to TCP to reflect this.
Later, we will make sk_txrehash a part of the union for other
protocol families.
Note that we need to modify BPF selftest not to get/set
SO_TEREHASH for non-TCP sockets.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test redirection logic. All supported and unsupported redirect combinations
are tested for success and failure respectively.
BPF_MAP_TYPE_SOCKMAP
BPF_MAP_TYPE_SOCKHASH
x
sk_msg-to-egress
sk_msg-to-ingress
sk_skb-to-egress
sk_skb-to-ingress
x
AF_INET, SOCK_STREAM
AF_INET6, SOCK_STREAM
AF_INET, SOCK_DGRAM
AF_INET6, SOCK_DGRAM
AF_UNIX, SOCK_STREAM
AF_UNIX, SOCK_DGRAM
AF_VSOCK, SOCK_STREAM
AF_VSOCK, SOCK_SEQPACKET
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20250515-selftests-sockmap-redir-v3-5-a1ea723f7e7e@rbox.co
Instead of piggybacking on test_sockmap_listen, introduce
test_sockmap_redir especially for sockmap redirection tests.
Suggested-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20250515-selftests-sockmap-redir-v3-4-a1ea723f7e7e@rbox.co
Add integer wrappers for convenient sockmap usage.
While there, fix misaligned trailing slashes.
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20250515-selftests-sockmap-redir-v3-3-a1ea723f7e7e@rbox.co
Add function that returns string representation of socket's domain/type.
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20250515-selftests-sockmap-redir-v3-2-a1ea723f7e7e@rbox.co
Handle af_unix in init_addr_loopback(). For pair creation, bind() the peer
socket to make SOCK_DGRAM connect() happy.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20250515-selftests-sockmap-redir-v3-1-a1ea723f7e7e@rbox.co
Introduce SKIP_LLVM makefile variable that allows to avoid using llvm
dependencies when building BPF selftests. This is different from
existing feature-llvm, as the latter is a result of automatic detection
and should not be set by user explicitly.
Avoiding llvm dependencies could be useful for environments that do not
have them, given that as of now llvm dependencies are required only by
jit_disasm_helpers.c.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250522013813.125428-1-mykyta.yatsenko5@gmail.com
Extend split BTF test to cover case where we create split BTF on top of
existing split BTF and add info to it; ensure that such BTF can be
created and handled by searching within it, dumping/comparing to expected.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250519165935.261614-3-alan.maguire@oracle.com
Different subsystems may call cgroup_rstat_updated() within the same
cgroup, resulting in a tree of pending updates from multiple subsystems.
When one of these subsystems is flushed via cgroup_rstat_flushed(), all
other subsystems with pending updates on the tree will also be flushed.
Change the paradigm of having a single rstat tree for all subsystems to
having separate trees for each subsystem. This separation allows for
subsystems to perform flushes without the side effects of other subsystems.
As an example, flushing the cpu stats will no longer cause the memory stats
to be flushed and vice versa.
In order to achieve subsystem-specific trees, change the tree node type
from cgroup to cgroup_subsys_state pointer. Then remove those pointers from
the cgroup and instead place them on the css. Finally, change update/flush
functions to make use of the different node type (css). These changes allow
a specific subsystem to be associated with an update or flush. Separate
rstat trees will now exist for each unique subsystem.
Since updating/flushing will now be done at the subsystem level, there is
no longer a need to keep track of updated css nodes at the cgroup level.
The list management of these nodes done within the cgroup (rstat_css_list
and related) has been removed accordingly.
Conditional guards for checking validity of a given css were placed within
css_rstat_updated/flush() to prevent undefined behavior occuring from kfunc
usage in bpf programs. Guards were also placed within css_rstat_init/exit()
in order to help consolidate calls to them. At call sites for all four
functions, the existing guards were removed.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Remove llvm dependencies from binaries that do not use llvm libraries.
Filter out libxml2 from llvm dependencies, as it seems that
it is not actually used. This patch reduced link dependencies
for BPF selftests.
The next line was adding llvm dependencies to every target in the
makefile, while the only targets that require those are test
runnners (test_progs, test_progs-no_alu32,...):
```
$(OUTPUT)/$(TRUNNER_BINARY): LDLIBS += $$(LLVM_LDLIBS)
```
Before this change:
ldd linux/tools/testing/selftests/bpf/veristat
linux-vdso.so.1 (0x00007ffd2c3fd000)
libelf.so.1 => /lib64/libelf.so.1 (0x00007fe1dcf89000)
libz.so.1 => /lib64/libz.so.1 (0x00007fe1dcf6f000)
libm.so.6 => /lib64/libm.so.6 (0x00007fe1dce94000)
libzstd.so.1 => /lib64/libzstd.so.1 (0x00007fe1dcddd000)
libxml2.so.2 => /lib64/libxml2.so.2 (0x00007fe1dcc54000)
libstdc++.so.6 => /lib64/libstdc++.so.6 (0x00007fe1dca00000)
libc.so.6 => /lib64/libc.so.6 (0x00007fe1dc600000)
/lib64/ld-linux-x86-64.so.2 (0x00007fe1dcfb1000)
liblzma.so.5 => /lib64/liblzma.so.5 (0x00007fe1dc9d4000)
libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007fe1dcc38000)
After:
ldd linux/tools/testing/selftests/bpf/veristat
linux-vdso.so.1 (0x00007ffc83370000)
libelf.so.1 => /lib64/libelf.so.1 (0x00007f4b87515000)
libz.so.1 => /lib64/libz.so.1 (0x00007f4b874fb000)
libc.so.6 => /lib64/libc.so.6 (0x00007f4b87200000)
libzstd.so.1 => /lib64/libzstd.so.1 (0x00007f4b87444000)
/lib64/ld-linux-x86-64.so.2 (0x00007f4b8753d000)
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250516195522.311769-1-mykyta.yatsenko5@gmail.com
Most tracepoints in the kernel are created with TRACE_EVENT(). The
TRACE_EVENT() macro (and DECLARE_EVENT_CLASS() and DEFINE_EVENT() where in
reality, TRACE_EVENT() is just a helper macro that calls those other two
macros), will create not only a tracepoint (the function trace_<event>()
used in the kernel), it also exposes the tracepoint to user space along
with defining what fields will be saved by that tracepoint.
There are a few places that tracepoints are created in the kernel that are
not exposed to userspace via tracefs. They can only be accessed from code
within the kernel. These tracepoints are created with DEFINE_TRACE()
Most of these tracepoints end with "_tp". This is useful as when the
developer sees that, they know that the tracepoint is for in-kernel only
(meaning it can only be accessed inside the kernel, either directly by the
kernel or indirectly via modules and BPF programs) and is not exposed to
user space.
Instead of making this only a process to add "_tp", enforce it by making
the DECLARE_TRACE() append the "_tp" suffix to the tracepoint. This
requires adding DECLARE_TRACE_EVENT() macros for the TRACE_EVENT() macro
to use that keeps the original name.
Link: https://lore.kernel.org/all/20250418083351.20a60e64@gandalf.local.home/
Cc: netdev <netdev@vger.kernel.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Juri Lelli <juri.lelli@gmail.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250510163730.092fad5b@gandalf.local.home
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently rst2man is required to build bpf selftests, as the tool is
used by Makefile.docs. rst2man may be missing in some build
environments and is not essential for selftests. It makes sense to
allow user to skip building docs.
This patch adds SKIP_DOCS variable into bpf selftests Makefile that when
set to 1 allows skipping building docs, for example:
make -C tools/testing/selftests TARGETS=bpf SKIP_DOCS=1
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250510002450.365613-1-mykyta.yatsenko5@gmail.com
Tests:
- 458/p ld_dw: xor semi-random 64-bit imms, test 5
- 501/p scale: scale test 1
- 502/p scale: scale test 2
fail in verbose mode due to bpf_vlog[] overflowing. These tests
generate large verifier logs that exceed the current buffer size,
causing them to fail to load.
Increase the size of the bpf_vlog[] buffer to accommodate larger
logs and prevent false failures during test runs with verbose output.
Signed-off-by: Gregory Bell <grbell@redhat.com>
Link: https://lore.kernel.org/r/e49267100f07f099a5877a3a5fc797b702bbaf0c.1747058195.git.grbell@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When running test_verifier with the -v flag and a test with
`expected_ret==VERBOSE_ACCEPT`, the opts.log_level is unintentionally
overwritten because the verbose flag takes precedence. This leads to
a mismatch in the expected and actual contents of bpf_vlog, causing
tests to fail incorrectly.
Reorder the conditional logic that sets opts.log_level to preserve
the expected log level and prevent it from being overridden by -v.
Signed-off-by: Gregory Bell <grbell@redhat.com>
Link: https://lore.kernel.org/r/182bf00474f817c99f968a9edb119882f62be0f8.1747058195.git.grbell@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding link info test for ref_ctr_offset retrieval for both
uprobe and uretprobe probes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/bpf/20250509153539.779599-3-jolsa@kernel.org
Currently, __xlated_unpriv and __jited_unpriv do not work because the
BPF syscall will overwrite info.jited_prog_len and info.xlated_prog_len
with 0 if the process is not bpf_capable(). This bug was not noticed
before, because there is no test that actually uses
__xlated_unpriv/__jited_unpriv.
To resolve this, simply restore the capabilities earlier (but still
after loading the program). Adding this here unconditionally is fine
because the function first checks that the capabilities were initialized
before attempting to restore them.
This will be important later when we add tests that check whether a
speculation barrier was inserted in the correct location.
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Fixes: 9c9f733913 ("selftests/bpf: allow checking xlated programs in verifier_* tests")
Fixes: 7d743e4c75 ("selftests/bpf: __jited test tag to check disassembly after jit")
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250501073603.1402960-2-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For riscv64, enable all BPF_{LOAD_ACQ,STORE_REL} selftests except the
arena_atomics/* ones (not guarded behind CAN_USE_LOAD_ACQ_STORE_REL),
since arena access is not yet supported.
Acked-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # QEMU/RVA23
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/9d878fa99a72626208a8eed3c04c4140caf77fda.1746588351.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Verify that 8-, 16- and 32-bit load-acquires are zero-extending by using
immediate values with their highest bit set. Do the same for the 64-bit
variant to keep the style consistent.
Acked-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # QEMU/RVA23
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/11097fd515f10308b3941469ee4c86cb8872db3f.1746588351.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, we pass 0x1234567890abcdef to __retval() for the following
two tests:
verifier_load_acquire/load_acquire_64
verifier_store_release/store_release_64
However, the upper 32 bits of that value are being ignored, since
__retval() expects an int. Actually, the tests would still pass even if
I change '__retval(0x1234567890abcdef)' to e.g. '__retval(0x90abcdef)'.
Restructure the tests a bit to test the entire 64-bit values properly.
Do the same to their 8-, 16- and 32-bit variants as well to keep the
style consistent.
Fixes: ff3afe5da9 ("selftests/bpf: Add selftests for load-acquire and store-release instructions")
Acked-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # QEMU/RVA23
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/d67f4c6f6ee0d0388cbce1f4892ec4176ee2d604.1746588351.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of open-coding the conditions, use
'#ifdef CAN_USE_LOAD_ACQ_STORE_REL' to guard the following tests:
verifier_precision/bpf_load_acquire
verifier_precision/bpf_store_release
verifier_store_release/*
Note that, for the first two tests in verifier_precision.c, switching to
'#ifdef CAN_USE_LOAD_ACQ_STORE_REL' means also checking if
'__clang_major__ >= 18', which has already been guaranteed by the outer
'#if' check.
Acked-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # QEMU/RVA23
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/45d7e025f6e390a8ff36f08fc51e31705ac896bd.1746588351.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds the "list_peek" test to use the new
bpf_list_{front,back} kfunc.
The test_{front,back}* tests ensure that the return value
is a non_own_ref node pointer and requires the spinlock to be held.
Suggested-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> # check non_own_ref marking
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-9-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch has a much simplified rbtree usage from the
kernel sch_fq qdisc. It has a "struct node_data" which can be
added to two different rbtrees which are ordered by different keys.
The test first populates both rbtrees. Then search for a lookup_key
from the "groot0" rbtree. Once the lookup_key is found, that node
refcount is taken. The node is then removed from another "groot1"
rbtree.
While searching the lookup_key, the test will also try to remove
all rbnodes in the path leading to the lookup_key.
The test_{root,left,right}_spinlock_true tests ensure that the
return value of the bpf_rbtree functions is a non_own_ref node pointer.
This is done by forcing an verifier error by calling a helper
bpf_jiffies64() while holding the spinlock. The tests then
check for the verifier message
"call bpf_rbtree...R0=rcu_ptr_or_null_node..."
The other test_{root,left,right}_spinlock_false tests ensure that
they must be called with spinlock held.
Suggested-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> # Check non_own_ref marking
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-6-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bpf_rbtree_{remove,left,right} requires the root's lock to be held.
They also check the node_internal->owner is still owned by that root
before proceeding, so it is safe to allow refcounted bpf_rb_node
pointer to be used in these kfuncs.
In a bpf fq implementation which is much closer to the kernel fq,
https://lore.kernel.org/bpf/20250418224652.105998-13-martin.lau@linux.dev/,
a networking flow (allocated by bpf_obj_new) can be added to two different
rbtrees. There are cases that the flow is searched from one rbtree,
held the refcount of the flow, and then removed from another rbtree:
struct fq_flow {
struct bpf_rb_node fq_node;
struct bpf_rb_node rate_node;
struct bpf_refcount refcount;
unsigned long sk_long;
};
int bpf_fq_enqueue(...)
{
/* ... */
bpf_spin_lock(&root->lock);
while (can_loop) {
/* ... */
if (!p)
break;
gc_f = bpf_rb_entry(p, struct fq_flow, fq_node);
if (gc_f->sk_long == sk_long) {
f = bpf_refcount_acquire(gc_f);
break;
}
/* ... */
}
bpf_spin_unlock(&root->lock);
if (f) {
bpf_spin_lock(&q->lock);
bpf_rbtree_remove(&q->delayed, &f->rate_node);
bpf_spin_unlock(&q->lock);
}
}
bpf_rbtree_{left,right} do not need this change but are relaxed together
with bpf_rbtree_remove instead of adding extra verifier logic
to exclude these kfuncs.
To avoid bi-sect failure, this patch also changes the selftests together.
The "rbtree_api_remove_unadded_node" is not expecting verifier's error.
The test now expects bpf_rbtree_remove(&groot, &m->node) to return NULL.
The test uses __retval(0) to ensure this NULL return value.
Some of the "only take non-owning..." failure messages are changed also.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-5-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCaBVftAAKCRAraS+Z+3y5
EzJ7AP9dtYuBHmU0tB5upuLzQ9sVxaCXs2linfRKK40A5YJDcgD/fBQqPzhxCqZR
moHEqelMLgrAUcyro5egdRJZPcaTfQE=
=6Las
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-05-02
We've added 14 non-merge commits during the last 10 day(s) which contain
a total of 13 files changed, 740 insertions(+), 121 deletions(-).
The main changes are:
1) Avoid skipping or repeating a sk when using a UDP bpf_iter,
from Jordan Rife.
2) Fixed a crash when a bpf qdisc is set in
the net.core.default_qdisc, from Amery Hung.
3) A few other fixes in the bpf qdisc, from Amery Hung.
- Always call qdisc_watchdog_init() in the .init prologue such that
the .reset/.destroy epilogue can always call qdisc_watchdog_cancel()
without issue.
- bpf_qdisc_init_prologue() was incorrectly returning an error
when the bpf qdisc is set as the default_qdisc and the mq is creating
the default_qdisc. It is now fixed.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Cleanup bpf qdisc selftests
selftests/bpf: Test attaching a bpf qdisc with incomplete operators
bpf: net_sched: Make some Qdisc_ops ops mandatory
selftests/bpf: Test setting and creating bpf qdisc as default qdisc
bpf: net_sched: Fix bpf qdisc init prologue when set as default qdisc
selftests/bpf: Add tests for bucket resume logic in UDP socket iterators
selftests/bpf: Return socket cookies from sock_iter_batch progs
bpf: udp: Avoid socket skips and repeats during iteration
bpf: udp: Use bpf_udp_iter_batch_item for bpf_udp_iter_state batch items
bpf: udp: Get rid of st_bucket_done
bpf: udp: Make sure iter->batch always contains a full bucket snapshot
bpf: udp: Make mem flags configurable through bpf_iter_udp_realloc_batch
bpf: net_sched: Fix using bpf qdisc as default qdisc
selftests/bpf: Fix compilation errors
====================
Link: https://patch.msgid.link/20250503010755.4030524-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some cleanups:
- Remove unnecessary kfuncs declaration
- Use _ns in the test name to run tests in a separate net namespace
- Call skeleton __attach() instead of bpf_map__attach_struct_ops() to
simplify tests.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Implement .destroy in bpf_fq and bpf_fifo as it is now mandatory.
Test attaching a bpf qdisc with a missing operator .init. This is not
allowed as bpf qdisc qdisc_watchdog_cancel() could have been called with
an uninitialized timer.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
First, test that bpf qdisc can be set as default qdisc. Then, attach
an mq qdisc to see if bpf qdisc can be successfully created and grafted.
The test is a sequential test as net.core.default_qdisc is global.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Introduce a set of tests that exercise various bucket resume scenarios:
* remove_seen resumes iteration after removing a socket from the bucket
that we've already processed. Before, with the offset-based approach,
this test would have skipped an unseen socket after resuming
iteration. With the cookie-based approach, we now see all sockets
exactly once.
* remove_unseen exercises the condition where the next socket that we
would have seen is removed from the bucket before we resume iteration.
This tests the scenario where we need to scan past the first cookie in
our remembered cookies list to find the socket from which to resume
iteration.
* remove_all exercises the condition where all sockets we remembered
were removed from the bucket to make sure iteration terminates and
returns no more results.
* add_some exercises the condition where a few, but not enough to
trigger a realloc, sockets are added to the head of the current bucket
between reads. Before, with the offset-based approach, this test would
have repeated sockets we've already seen. With the cookie-based
approach, we now see all sockets exactly once.
* force_realloc exercises the condition that we need to realloc the
batch on a subsequent read, since more sockets than can be held in the
current batch array were added to the current bucket. This exercies
the logic inside bpf_iter_udp_realloc_batch that copies cookies into
the new batch to make sure nothing is skipped or repeated.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Extend the iter_udp_soreuse and iter_tcp_soreuse programs to write the
cookie of the current socket, so that we can track the identity of the
sockets that the iterator has seen so far. Update the existing do_test
function to account for this change to the iterator program output. At
the same time, teach both programs to work with AF_INET as well.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Recently issues were observed with module BTF deduplication failures
[1]. Add a dedup selftest that ensures that core kernel types are
referenced from split BTF as base BTF types. To do this use bpf_testmod
functions which utilize core kernel types, specifically
ssize_t
bpf_testmod_test_write(struct file *file, struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t len);
__bpf_kfunc struct sock *bpf_kfunc_call_test3(struct sock *sk);
__bpf_kfunc void bpf_kfunc_call_test_pass_ctx(struct __sk_buff *skb);
For each of these ensure that the types they reference -
struct file, struct kobject, struct bin_attr etc - are in base BTF.
Note that because bpf_testmod.ko is built with distilled base BTF
the associated reference types - i.e. the PTR that points at a
"struct file" - will be in split BTF. As a result the test resolves
typedef and pointer references and verifies the pointed-at or
typedef'ed type is in base BTF. Because we use BTF from
/sys/kernel/btf/bpf_testmod relocation has occurred for the
referenced types and they will be base - not distilled base - types.
For large-scale dedup issues, we see such types appear in split BTF and
as a result this test fails. Hence it is proposed as a test which will
fail when large-scale dedup issues have occurred.
[1] https://lore.kernel.org/dwarves/CAADnVQL+-LiJGXwxD3jEUrOonO-fX0SZC8496dVzUXvfkB7gYQ@mail.gmail.com/
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20250430134249.2451066-1-alan.maguire@oracle.com
Improve xdp_metadata bpf selftest in order to check it is possible for a
XDP dev-bound program to perform XDP_REDIRECT into a DEVMAP but it is still
not allowed to attach a XDP dev-bound program to a DEVMAP entry.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
If the CONFIG_NET_SCH_BPF configuration is not enabled,
the BPF test compilation will report the following error:
In file included from progs/bpf_qdisc_fq.c:39:
progs/bpf_qdisc_common.h:17:51: error: declaration of 'struct bpf_sk_buff_ptr' will not be visible outside of this function [-Werror,-Wvisibility]
17 | void bpf_qdisc_skb_drop(struct sk_buff *p, struct bpf_sk_buff_ptr *to_free) __ksym;
| ^
progs/bpf_qdisc_fq.c:309:14: error: declaration of 'struct bpf_sk_buff_ptr' will not be visible outside of this function [-Werror,-Wvisibility]
309 | struct bpf_sk_buff_ptr *to_free)
| ^
progs/bpf_qdisc_fq.c:309:14: error: declaration of 'struct bpf_sk_buff_ptr' will not be visible outside of this function [-Werror,-Wvisibility]
progs/bpf_qdisc_fq.c:308:5: error: conflicting types for '____bpf_fq_enqueue'
Fixes: 11c701639b ("selftests/bpf: Add a basic fifo qdisc test")
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250428033445.58113-1-yangfeng59949@163.com
The closing parentheses around the read syscall is misplaced, causing
single byte reads from the iterator instead of buf sized reads. While
the end result is the same, many more read calls than necessary are
performed.
$ tools/testing/selftests/bpf/vmtest.sh "./test_progs -t kmem_cache_iter"
145/1 kmem_cache_iter/check_task_struct:OK
145/2 kmem_cache_iter/check_slabinfo:OK
145/3 kmem_cache_iter/open_coded_iter:OK
145 kmem_cache_iter:OK
Summary: 1/3 PASSED, 0 SKIPPED, 0 FAILED
Fixes: a496d0cdc8 ("selftests/bpf: Add a test for kmem_cache_iter")
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://patch.msgid.link/20250428180256.1482899-1-tjmercier@google.com
Make sure that CAN_USE_BPF_ST test (compute_live_registers/store) is
enabled when __clang_major__ >= 18.
Fixes: 2ea8f6a1cd ("selftests/bpf: test cases for compute_live_registers()")
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/20250425213712.1542077-1-yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add test that modifies the map while it's being iterated in such a way that
hangs the kernel thread unless the _safe fix is applied to
bpf_for_each_hash_elem.
Signed-off-by: Brandon Kammerdiener <brandon.kammerdiener@intel.com>
Link: https://lore.kernel.org/r/20250424153246.141677-3-brandon.kammerdiener@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Copy the big-endian field declarations from qspinlock_types.h,
otherwise some properties won't hold on big-endian systems. For
example, assigning lock->val = 1 should result in lock->locked == 1,
which is not the case there.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424165525.154403-4-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_arena_spin_lock_size() explicitly requires having at least 2 CPUs,
but if the machine has less than 16, then pthread_setaffinity_np() call
in spin_lock_thread() fails.
Cap threads to the number of CPUs.
Alternative solutions are raising the number of required CPUs to 16, or
pinning multiple threads to the same CPU, but they are not that useful.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424165525.154403-3-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Changing bpf_arena_spin_lock.h does not lead to recompiling
arena_spin_lock.c. By convention, all BPF progs depend on all
header files in progs/, so move this header file there. There
are no other users besides arena_spin_lock.c.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424165525.154403-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
tc_redirect/tc_redirect_dtime fails intermittently on some systems
with:
(network_helpers.c:303: errno: Operation now in progress) Failed to connect to server
The problem is that on these systems systemd-networkd and systemd-udevd
are installed in the default configuration, which includes:
/usr/lib/systemd/network/99-default.link
/usr/lib/udev/rules.d/80-net-setup-link.rules
These configs instruct systemd to change MAC addresses of newly created
interfaces, which includes the ones created by BPF selftests. In this
particular case it causes SYN+ACK packets to be dropped, because they
get the PACKET_OTHERHOST type - the fact that this causes a connect()
on a blocking socket to return -EINPROGRESS looks like a bug, which
needs to be investigated separately.
systemd won't change the MAC address if the kernel reports that it was
already set by userspace; the NET_ADDR_SET check in
link_generate_new_hw_addr() is responsible for this.
In order to eliminate the race window between systemd and the test,
set MAC addresses during link creation. Ignore checkpatch's "quoted
string split across lines" warning, since it points to a command line,
and not a user-visible message.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250416124845.584362-1-iii@linux.ibm.com
Adding verifier test for accessing const void pointer argument in
tracing programs.
The test program loads 1st argument of bpf_fentry_test10 function
which is const void pointer and checks that verifier allows that.
Signed-off-by: KaFai Wan <mannkafai@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20250423121329.3163461-3-mannkafai@gmail.com
Static analysis found an issue in bench_htab_mem.c and sk_assign.c
cppcheck output before this patch:
tools/testing/selftests/bpf/benchs/bench_htab_mem.c:284:3: error: Resource leak: fd [resourceLeak]
tools/testing/selftests/bpf/prog_tests/sk_assign.c:41:3: error: Resource leak: tc [resourceLeak]
cppcheck output after this patch:
No resource leaks found
Fix the issue by closing the file descriptors fd and tc.
Signed-off-by: Malaya Kumar Rout <malayarout91@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250421174405.26080-1-malayarout91@gmail.com
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCaAFFvgAKCRAraS+Z+3y5
E/1OAP9SGmTMgHuHLlF8en+MaYdtwgcHy6uurXgbSQAAV/RwwQEAh2oXZE1D9I7a
EtxsaJYqbbhD09RPwWa2Rd8iJrJYXQk=
=qcoU
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-04-17
We've added 12 non-merge commits during the last 9 day(s) which contain
a total of 18 files changed, 1748 insertions(+), 19 deletions(-).
The main changes are:
1) bpf qdisc support, from Amery Hung.
A qdisc can be implemented in bpf struct_ops programs and
can be used the same as other existing qdiscs in the
"tc qdisc" command.
2) Add xsk tail adjustment tests, from Tushar Vyavahare.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Test attaching bpf qdisc to mq and non root
selftests/bpf: Add a bpf fq qdisc to selftest
selftests/bpf: Add a basic fifo qdisc test
libbpf: Support creating and destroying qdisc
bpf: net_sched: Disable attaching bpf qdisc to non root
bpf: net_sched: Support updating bstats
bpf: net_sched: Add a qdisc watchdog timer
bpf: net_sched: Add basic bpf qdisc kfuncs
bpf: net_sched: Support implementation of Qdisc_ops in bpf
bpf: Prepare to reuse get_ctx_arg_idx
selftests/xsk: Add tail adjustment tests and support check
selftests/xsk: Add packet stream replacement function
====================
Link: https://patch.msgid.link/20250417184338.3152168-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a 5-byte NOP uprobe trigger benchmark (x86_64 specific) to measure
uprobes/uretprobes on top of NOP5 instructions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20250414083647.1234007-2-jolsa@kernel.org
Until we are certain that existing classful qdiscs work with bpf qdisc,
make sure we don't allow attaching a bpf qdisc to non root. Meanwhile,
attaching to mq is allowed.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250409214606.2000194-11-ameryhung@gmail.com
This test implements a more sophisticated qdisc using bpf. The bpf fair-
queueing (fq) qdisc gives each flow an equal chance to transmit data. It
also respects the timestamp of skb for rate limiting.
Signed-off-by: Amery Hung <amery.hung@bytedance.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250409214606.2000194-10-ameryhung@gmail.com
This selftest includes a bare minimum fifo qdisc, which simply enqueues
sk_buffs into the back of a bpf list and dequeues from the front of the
list.
Signed-off-by: Amery Hung <amery.hung@bytedance.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250409214606.2000194-9-ameryhung@gmail.com
-----BEGIN PGP SIGNATURE-----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=Mezb
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Followup fixes for resilient spinlock (Kumar Kartikeya Dwivedi):
- Make res_spin_lock test less verbose, since it was spamming BPF
CI on failure, and make the check for AA deadlock stronger
- Fix rebasing mistake and use architecture provided
res_smp_cond_load_acquire
- Convert BPF maps (queue_stack and ringbuf) to resilient spinlock
to address long standing syzbot reports
- Make sure that classic BPF load instruction from SKF_[NET|LL]_OFF
offsets works when skb is fragmeneted (Willem de Bruijn)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Convert ringbuf map to rqspinlock
bpf: Convert queue_stack map to rqspinlock
bpf: Use architecture provided res_smp_cond_load_acquire
selftests/bpf: Make res_spin_lock AA test condition stronger
selftests/net: test sk_filter support for SKF_NET_OFF on frags
bpf: support SKF_NET_OFF and SKF_LL_OFF on skb frags
selftests/bpf: Make res_spin_lock test less verbose
Let's make sure that we see a EDEADLK and ETIMEDOUT whenever checking
for the AA tests (in case of simple AA and AA after exhausting 31
entries).
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250410170023.2670683-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce tail adjustment functionality in xskxceiver using
bpf_xdp_adjust_tail(). Add `xsk_xdp_adjust_tail` to modify packet sizes
and drop unmodified packets. Implement `is_adjust_tail_supported` to check
helper availability. Develop packet resizing tests, including shrinking
and growing scenarios, with functions for both single-buffer and
multi-buffer cases. Update the test framework to handle various scenarios
and adjust MTU settings. These changes enhance the testing of packet tail
adjustments, improving AF_XDP framework reliability.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250410033116.173617-3-tushar.vyavahare@intel.com
Add pkt_stream_replace_ifobject function to replace the packet stream for
a given ifobject.
Enable separate TX and RX packet replacement, allowing RX side packet
length adjustments using bpf_xdp_adjust_tail() in the upcoming patch.
Currently, pkt_stream_replace() works on both TX and RX packet streams,
and this new function provides the ability to modify one of them.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250410033116.173617-2-tushar.vyavahare@intel.com
Add a test case to verify the atomic update of existing elements in the
htab of maps. The test proceeds in three steps:
1) fill the outer map with keys in the range [0, 8]
For each inner array map, the value of its first element is set as the
key used to lookup the inner map.
2) create 16 threads to lookup these keys concurrently
Each lookup thread first lookups the inner map, then it checks whether
the first value of the inner array map is the same as the key used to
lookup the inner map.
3) create 8 threads to overwrite these keys concurrently
Each update thread first creates an inner array, it sets the first value
of the array to the key used to update the outer map, then it uses the
key and the inner map to update the outer map.
Without atomic update support, the lookup operation may return -ENOENT
during the lookup of outer map, or return -EINVAL during the comparison
of the first value in the inner map and the key used for inner map, and
the test will fail. After the atomic update change, both the lookup and
the comparison will succeed.
Given that the update of outer map is slow, the test case sets the loop
number for each thread as 5 to reduce the total running time. However,
the loop number could also be adjusted through FD_HTAB_LOOP_NR
environment variable.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20250401062250.543403-7-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add TCP+sockmap-based benchmark.
Since sockmap's own update and delete operations are generally less
critical, the performance of the fast forwarding framework built upon
it is the key aspect.
Also with cgset/cgexec, we can observe the behavior of sockmap under
memory pressure.
The benchmark can be run with:
'''
./bench sockmap -c 2 -p 1 -a --rx-verdict-ingress
'''
In the future, we plan to move socket_helpers.h out of the prog_tests
directory to make it accessible for the benchmark. This will enable
better support for various socket types.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20250407142234.47591-5-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For systems with missing iptables-legacy tool this selftest fails.
Add check to find if iptables-legacy tool is available and skip the
test if the tool is missing.
Fixes: de9c8d848d ("selftests/bpf: S/iptables/iptables-legacy/ in the bpf_nf and xdp_synproxy test")
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250409095633.33653-1-skb99@linux.ibm.com
Add selftests checking that line and func info retrieved by newly added
libbpf APIs are the same as returned by kernel via bpf_prog_get_info_by_fd.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250408234417.452565-3-mykyta.yatsenko5@gmail.com
Extend commit e3c9abd0d1 ("selftests/bpf: Implement setting global
variables in veristat") to support applying presets to members of
the global structs or unions in veristat.
For example:
```
./veristat set_global_vars.bpf.o -G "union1.struct3.var_u8_h = 0xBB"
```
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250408104544.140317-1-mykyta.yatsenko5@gmail.com
Finish cleaning up the CRC kconfig options by removing the remaining
unnecessary prompts and an unnecessary 'default y', removing
CONFIG_LIBCRC32C, and documenting all the CRC library options.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZ/P7QhQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKyoOAQCynFcS1dWuD27S+SdUREmBjMAoZo5M
zdsIvlPv9KLycgD/QX5lXjW3KIYY6jQ8vHUuLVwfDl/JEp4GJS9dLGU+agg=
=0R1T
-----END PGP SIGNATURE-----
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC cleanups from Eric Biggers:
"Finish cleaning up the CRC kconfig options by removing the remaining
unnecessary prompts and an unnecessary 'default y', removing
CONFIG_LIBCRC32C, and documenting all the CRC library options"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crc: remove CONFIG_LIBCRC32C
lib/crc: document all the CRC library kconfig options
lib/crc: remove unnecessary prompt for CONFIG_CRC_ITU_T
lib/crc: remove unnecessary prompt for CONFIG_CRC_T10DIF
lib/crc: remove unnecessary prompt for CONFIG_CRC16
lib/crc: remove unnecessary prompt for CONFIG_CRC_CCITT
lib/crc: remove unnecessary prompt for CONFIG_CRC32 and drop 'default y'
Currently, the res_spin_lock test is too chatty as it constantly prints
the test_run results for each iteration in each thread, so in case
verbose output is requested or things go wrong, it will flood the logs
of CI and other systems with repeated messages that offer no valuable
insight. Reduce this by doing assertions when the condition actually
flips, and proceed to break out and exit the threads. We still assert
to mark the test as failed and print the expected and reported values.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250403220841.66654-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This non-functional change serves as preparation for moving to
subsystem-based rstat trees. To simplify future commits, change the
signatures of existing cgroup-based rstat functions to become css-based and
rename them to reflect that.
Though the signatures have changed, the implementations have not. Within
these functions use the css->cgroup pointer to obtain the associated cgroup
and allow code to function the same just as it did before this patch. At
applicable call sites, pass the subsystem-specific css pointer as an
argument or pass a pointer to cgroup::self if not in subsystem context.
Note that cgroup_rstat_updated_list() and cgroup_rstat_push_children()
are not altered yet since there would be a larger amount of css to
cgroup conversions which may overcomplicate the code at this
intermediate phase.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
All modules that need CONFIG_CRC_T10DIF already select it, so there is no
need to bother users about the option.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250401221600.24878-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/bpf/20250401061546.1990156-1-nichen@iscas.ac.cn
A few selftests and, more importantly, consequent changes to the
bpf_helpers.h file, use likely/unlikely macros, so define them here
and remove duplicate definitions from existing selftests.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250331203618.1973691-3-a.s.protopopov@gmail.com
Commit [1] moves percpu data on x86 from address 0x000... to address
0xfff...
Before [1]:
159020: 0000000000030700 0 OBJECT GLOBAL DEFAULT 23 pcpu_hot
After [1]:
152602: ffffffff83a3e034 4 OBJECT GLOBAL DEFAULT 35 pcpu_hot
As a result, verifier_bpf_fastcall tests should now expect a negative
value for pcpu_hot, IOW, the disassemble should show "r=" instead of
"w=".
Fix this in the test.
Note that, a later change created a new variable "cpu_number" for
bpf_get_smp_processor_id() [2]. The inlining logic is updated properly
as part of this change, so there is no need to fix anything on the
kernel side.
[1] commit 9d7de2aa8b ("x86/percpu/64: Use relative percpu offsets")
[2] commit 01c7bc5198 ("x86/smp: Move cpu number to percpu hot section")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250328193124.808784-1-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The change in struct file [1] moved f_ref to the 3rd cache line.
It made *(u64 *)file dereference invalid from the verifier point of view,
because btf_struct_walk() walks into f_lock field, which is 4-byte long.
Fix the selftests to deference the file pointer as a 4-byte access.
[1] commit e249056c91 ("fs: place f_ref to 3rd cache line in struct file to resolve false sharing")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250327185528.1740787-1-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in 6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates.
This has been in linux-next for a while now, with the only reported
issue being some merge conflicts with the rust tree. Depending on which
tree you pull first, you will have conflicts in one of them. The merge
resolution has been in linux-next as an example of what to do, or can be
found here:
https://lore.kernel.org/r/CANiq72n3Xe8JcnEjirDhCwQgvWoE65dddWecXnfdnbrmuah-RQ@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mMrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRgwCdH58OE3BgL0uoFY5vFImStpmPtqUAoL5HpVWI
jtbJ+UuXGsnmO+JVNBEv
=gy6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
-----BEGIN PGP SIGNATURE-----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=5O7h
-----END PGP SIGNATURE-----
Merge tag 'bpf_res_spin_lock' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf relisient spinlock support from Alexei Starovoitov:
"This patch set introduces Resilient Queued Spin Lock (or rqspinlock
with res_spin_lock() and res_spin_unlock() APIs).
This is a qspinlock variant which recovers the kernel from a stalled
state when the lock acquisition path cannot make forward progress.
This can occur when a lock acquisition attempt enters a deadlock
situation (e.g. AA, or ABBA), or more generally, when the owner of the
lock (which we’re trying to acquire) isn’t making forward progress.
Deadlock detection is the main mechanism used to provide instant
recovery, with the timeout mechanism acting as a final line of
defense. Detection is triggered immediately when beginning the waiting
loop of a lock slow path.
Additionally, BPF programs attached to different parts of the kernel
can introduce new control flow into the kernel, which increases the
likelihood of deadlocks in code not written to handle reentrancy.
There have been multiple syzbot reports surfacing deadlocks in
internal kernel code due to the diverse ways in which BPF programs can
be attached to different parts of the kernel. By switching the BPF
subsystem’s lock usage to rqspinlock, all of these issues are
mitigated at runtime.
This spin lock implementation allows BPF maps to become safer and
remove mechanisms that have fallen short in assuring safety when
nesting programs in arbitrary ways in the same context or across
different contexts.
We run benchmarks that stress locking scalability and perform
comparison against the baseline (qspinlock). For the rqspinlock case,
we replace the default qspinlock with it in the kernel, such that all
spin locks in the kernel use the rqspinlock slow path. As such,
benchmarks that stress kernel spin locks end up exercising rqspinlock.
More details in the cover letter in commit 6ffb9017e9 ("Merge branch
'resilient-queued-spin-lock'")"
* tag 'bpf_res_spin_lock' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (24 commits)
selftests/bpf: Add tests for rqspinlock
bpf: Maintain FIFO property for rqspinlock unlock
bpf: Implement verifier support for rqspinlock
bpf: Introduce rqspinlock kfuncs
bpf: Convert lpm_trie.c to rqspinlock
bpf: Convert percpu_freelist.c to rqspinlock
bpf: Convert hashtab.c to rqspinlock
rqspinlock: Add locktorture support
rqspinlock: Add entry to Makefile, MAINTAINERS
rqspinlock: Add macros for rqspinlock usage
rqspinlock: Add basic support for CONFIG_PARAVIRT
rqspinlock: Add a test-and-set fallback
rqspinlock: Add deadlock detection and recovery
rqspinlock: Protect waiters in trylock fallback from stalls
rqspinlock: Protect waiters in queue from stalls
rqspinlock: Protect pending bit owners from stalls
rqspinlock: Hardcode cond_acquire loops for arm64
rqspinlock: Add support for timeouts
rqspinlock: Drop PV and virtualization support
rqspinlock: Add rqspinlock.h header
...
-----BEGIN PGP SIGNATURE-----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=aN/V
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"For this merge window we're splitting BPF pull request into three for
higher visibility: main changes, res_spin_lock, try_alloc_pages.
These are the main BPF changes:
- Add DFA-based live registers analysis to improve verification of
programs with loops (Eduard Zingerman)
- Introduce load_acquire and store_release BPF instructions and add
x86, arm64 JIT support (Peilin Ye)
- Fix loop detection logic in the verifier (Eduard Zingerman)
- Drop unnecesary lock in bpf_map_inc_not_zero() (Eric Dumazet)
- Add kfunc for populating cpumask bits (Emil Tsalapatis)
- Convert various shell based tests to selftests/bpf/test_progs
format (Bastien Curutchet)
- Allow passing referenced kptrs into struct_ops callbacks (Amery
Hung)
- Add a flag to LSM bpf hook to facilitate bpf program signing
(Blaise Boscaccy)
- Track arena arguments in kfuncs (Ihor Solodrai)
- Add copy_remote_vm_str() helper for reading strings from remote VM
and bpf_copy_from_user_task_str() kfunc (Jordan Rome)
- Add support for timed may_goto instruction (Kumar Kartikeya
Dwivedi)
- Allow bpf_get_netns_cookie() int cgroup_skb programs (Mahe Tardy)
- Reduce bpf_cgrp_storage_busy false positives when accessing cgroup
local storage (Martin KaFai Lau)
- Introduce bpf_dynptr_copy() kfunc (Mykyta Yatsenko)
- Allow retrieving BTF data with BTF token (Mykyta Yatsenko)
- Add BPF kfuncs to set and get xattrs with 'security.bpf.' prefix
(Song Liu)
- Reject attaching programs to noreturn functions (Yafang Shao)
- Introduce pre-order traversal of cgroup bpf programs (Yonghong
Song)"
* tag 'bpf-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (186 commits)
selftests/bpf: Add selftests for load-acquire/store-release when register number is invalid
bpf: Fix out-of-bounds read in check_atomic_load/store()
libbpf: Add namespace for errstr making it libbpf_errstr
bpf: Add struct_ops context information to struct bpf_prog_aux
selftests/bpf: Sanitize pointer prior fclose()
selftests/bpf: Migrate test_xdp_vlan.sh into test_progs
selftests/bpf: test_xdp_vlan: Rename BPF sections
bpf: clarify a misleading verifier error message
selftests/bpf: Add selftest for attaching fexit to __noreturn functions
bpf: Reject attaching fexit/fmod_ret to __noreturn functions
bpf: Only fails the busy counter check in bpf_cgrp_storage_get if it creates storage
bpf: Make perf_event_read_output accessible in all program types.
bpftool: Using the right format specifiers
bpftool: Add -Wformat-signedness flag to detect format errors
selftests/bpf: Test freplace from user namespace
libbpf: Pass BPF token from find_prog_btf_id to BPF_BTF_GET_FD_BY_ID
bpf: Return prog btf_id without capable check
bpf: BPF token support for BPF_BTF_GET_FD_BY_ID
bpf, x86: Fix objtool warning for timed may_goto
bpf: Check map->record at the beginning of check_and_free_fields()
...
icsk->icsk_timeout can be replaced by icsk->icsk_retransmit_timer.expires
This saves 8 bytes in TCP/DCCP sockets and helps for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250324203607.703850-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported out-of-bounds read in check_atomic_load/store() when the
register number is invalid in this context:
https://syzkaller.appspot.com/bug?extid=a5964227adc0f904549c
To avoid the issue from now on, let's add tests where the register number
is invalid for load-acquire/store-release.
After discussion with Eduard, I decided to use R15 as invalid register
because the actual slab-out-of-bounds read issue occurs when the register
number is R12 or larger.
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250322045340.18010-6-enjuk@amazon.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
syzbot reported the following splat [0].
In check_atomic_load/store(), register validity is not checked before
atomic_ptr_type_ok(). This causes the out-of-bounds read in is_ctx_reg()
called from atomic_ptr_type_ok() when the register number is MAX_BPF_REG
or greater.
Call check_load_mem()/check_store_reg() before atomic_ptr_type_ok()
to avoid the OOB read.
However, some tests introduced by commit ff3afe5da9 ("selftests/bpf: Add
selftests for load-acquire and store-release instructions") assume
calling atomic_ptr_type_ok() before checking register validity.
Therefore the swapping of order unintentionally changes verifier messages
of these tests.
For example in the test load_acquire_from_pkt_pointer(), expected message
is 'BPF_ATOMIC loads from R2 pkt is not allowed' although actual messages
are different.
validate_msgs:FAIL:754 expect_msg
VERIFIER LOG:
=============
Global function load_acquire_from_pkt_pointer() doesn't return scalar. Only those are supported.
0: R1=ctx() R10=fp0
; asm volatile ( @ verifier_load_acquire.c:140
0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx() R2_w=pkt(r=0)
1: (d3) r0 = load_acquire((u8 *)(r2 +0))
invalid access to packet, off=0 size=1, R2(id=0,off=0,r=0)
R2 offset is outside of the packet
processed 2 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
=============
EXPECTED SUBSTR: 'BPF_ATOMIC loads from R2 pkt is not allowed'
#505/19 verifier_load_acquire/load-acquire from pkt pointer:FAIL
This is because instructions in the test don't pass check_load_mem() and
therefore don't enter the atomic_ptr_type_ok() path.
In this case, we have to modify instructions so that they pass the
check_load_mem() and trigger atomic_ptr_type_ok().
Similarly for store-release tests, we need to modify instructions so that
they pass check_store_reg().
Like load_acquire_from_pkt_pointer(), modify instructions in:
load_acquire_from_sock_pointer()
store_release_to_ctx_pointer()
store_release_to_pkt_pointer()
Also in store_release_to_sock_pointer(), check_store_reg() returns error
early and atomic_ptr_type_ok() is not triggered, since write to sock
pointer is not possible in general.
We might be able to remove the test, but for now let's leave it and just
change the expected message.
[0]
BUG: KASAN: slab-out-of-bounds in is_ctx_reg kernel/bpf/verifier.c:6185 [inline]
BUG: KASAN: slab-out-of-bounds in atomic_ptr_type_ok+0x3d7/0x550 kernel/bpf/verifier.c:6223
Read of size 4 at addr ffff888141b0d690 by task syz-executor143/5842
CPU: 1 UID: 0 PID: 5842 Comm: syz-executor143 Not tainted 6.14.0-rc3-syzkaller-gf28214603dc6 #0
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0x16e/0x5b0 mm/kasan/report.c:521
kasan_report+0x143/0x180 mm/kasan/report.c:634
is_ctx_reg kernel/bpf/verifier.c:6185 [inline]
atomic_ptr_type_ok+0x3d7/0x550 kernel/bpf/verifier.c:6223
check_atomic_store kernel/bpf/verifier.c:7804 [inline]
check_atomic kernel/bpf/verifier.c:7841 [inline]
do_check+0x89dd/0xedd0 kernel/bpf/verifier.c:19334
do_check_common+0x1678/0x2080 kernel/bpf/verifier.c:22600
do_check_main kernel/bpf/verifier.c:22691 [inline]
bpf_check+0x165c8/0x1cca0 kernel/bpf/verifier.c:23821
Reported-by: syzbot+a5964227adc0f904549c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a5964227adc0f904549c
Tested-by: syzbot+a5964227adc0f904549c@syzkaller.appspotmail.com
Fixes: e24bbad29a8d ("bpf: Introduce load-acquire and store-release instructions")
Fixes: ff3afe5da9 ("selftests/bpf: Add selftests for load-acquire and store-release instructions")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250322045340.18010-5-enjuk@amazon.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are scenarios where env.{sub,}test_state->stdout_saved, can be
NULL, e.g. sometimes when the watchdog timeout kicks in, or if the
open_memstream syscall is not available.
Avoid crashing test_progs by adding an explicit NULL check prior the
fclose() call.
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20250318081648.122523-1-bjorn@kernel.org
test_xdp_vlan.sh isn't used by the BPF CI.
Migrate test_xdp_vlan.sh in prog_tests/xdp_vlan.c.
It uses the same BPF programs located in progs/test_xdp_vlan.c and the
same network topology.
Remove test_xdp_vlan*.sh and their Makefile entries.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250221-xdp_vlan-v1-2-7d29847169af@bootlin.com/
The __load() helper expects BPF sections to be names 'xdp' or 'tc'
Rename BPF sections so they can be loaded with the __load() helper in
upcoming patch.
Rename the BPF functions with their previous section's name.
Update the 'ip link' commands in the script to use the program name
instead of the section name to load the BPF program.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250221-xdp_vlan-v1-1-7d29847169af@bootlin.com
Introduce selftests that trigger AA, ABBA deadlocks, and test the edge
case where the held locks table runs out of entries, since we then
fallback to the timeout as the final line of defense. Also exercise
verifier's AA detection where applicable.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250316040541.108729-26-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add selftests to verify that it is possible to load freplace program
from user namespace if BPF token is initialized by bpf_object__prepare
before calling bpf_program__set_attach_target.
Negative test is added as well.
Modified type of the priv_prog to xdp, as kprobe did not work on aarch64
and s390x.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20250317174039.161275-5-mykyta.yatsenko5@gmail.com
The SO_RCVLOWAT option is defined as 18 in the selftest header,
which matches the generic definition. However, on powerpc,
SO_RCVLOWAT is defined as 16. This discrepancy causes
sol_socket_sockopt() to fail with the default switch case on powerpc.
This commit fixes by defining SO_RCVLOWAT as 16 for powerpc.
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20250311084647.3686544-1-skb99@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The strncmp benchmark uses the bpf_strncmp helper and a hand-written
loop to compare two strings. The values of the strings are filled from
userspace. One of the strings is non-const (in .bss) while the other is
const (in .rodata) since that is the requirement of bpf_strncmp.
The problem is that in the hand-written loop, Clang optimizes the reads
from the const string to always return 0 which breaks the benchmark.
Use barrier_var to prevent the optimization.
The effect can be seen on the strncmp-no-helper variant.
Before this change:
# ./bench strncmp-no-helper
Setting up benchmark 'strncmp-no-helper'...
Benchmark 'strncmp-no-helper' started.
Iter 0 (112.309us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 1 (-23.238us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 2 ( 58.994us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 3 (-30.466us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 4 ( 29.996us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 5 ( 16.949us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 6 (-60.035us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Summary: hits 0.000 ± 0.000M/s ( 0.000M/prod), drops 0.000 ± 0.000M/s, total operations 0.000 ± 0.000M/s
After this change:
# ./bench strncmp-no-helper
Setting up benchmark 'strncmp-no-helper'...
Benchmark 'strncmp-no-helper' started.
Iter 0 ( 77.711us): hits 5.534M/s ( 5.534M/prod), drops 0.000M/s, total operations 5.534M/s
Iter 1 ( 11.215us): hits 6.006M/s ( 6.006M/prod), drops 0.000M/s, total operations 6.006M/s
Iter 2 (-14.253us): hits 5.931M/s ( 5.931M/prod), drops 0.000M/s, total operations 5.931M/s
Iter 3 ( 59.087us): hits 6.005M/s ( 6.005M/prod), drops 0.000M/s, total operations 6.005M/s
Iter 4 (-21.379us): hits 6.010M/s ( 6.010M/prod), drops 0.000M/s, total operations 6.010M/s
Iter 5 (-20.310us): hits 5.861M/s ( 5.861M/prod), drops 0.000M/s, total operations 5.861M/s
Iter 6 ( 53.937us): hits 6.004M/s ( 6.004M/prod), drops 0.000M/s, total operations 6.004M/s
Summary: hits 5.969 ± 0.061M/s ( 5.969M/prod), drops 0.000 ± 0.000M/s, total operations 5.969 ± 0.061M/s
Fixes: 9c42652f8b ("selftests/bpf: Add benchmark for bpf_strncmp() helper")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20250313122852.1365202-1-vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Venkat reported a compilation error for BPF selftests on PowerPC [0].
The crux of the error is the following message:
In file included from progs/arena_spin_lock.c:7:
/root/bpf-next/tools/testing/selftests/bpf/bpf_arena_spin_lock.h:122:8:
error: member reference base type '__attribute__((address_space(1)))
u32' (aka '__attribute__((address_space(1))) unsigned int') is not a
structure or union
122 | old = atomic_read(&lock->val);
This is because PowerPC overrides the qspinlock type changing the
lock->val member's type from atomic_t to u32.
To remedy this, import the asm-generic version in the arena spin lock
header, name it __qspinlock (since it's aliased to arena_spinlock_t, the
actual name hardly matters), and adjust the selftest to not depend on
the type in vmlinux.h.
[0]: https://lore.kernel.org/bpf/7bc80a3b-d708-4735-aa3b-6a8c21720f9d@linux.ibm.com
Fixes: 88d706ba7c ("selftests/bpf: Introduce arena spin lock")
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20250311154244.3775505-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This test exercises the kernel flag added to security_bpf by
effectively blocking light-skeletons from loading while allowing
normal skeletons to function as-is. Since this should work with any
arbitrary BPF program, an existing program from LSKELS_EXTRA was
used as a test payload.
Signed-off-by: Blaise Boscaccy <bboscaccy@linux.microsoft.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250310221737.821889-3-bboscaccy@linux.microsoft.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Certain bpf syscall subcommands are available for usage from both
userspace and the kernel. LSM modules or eBPF gatekeeper programs may
need to take a different course of action depending on whether or not
a BPF syscall originated from the kernel or userspace.
Additionally, some of the bpf_attr struct fields contain pointers to
arbitrary memory. Currently the functionality to determine whether or
not a pointer refers to kernel memory or userspace memory is exposed
to the bpf verifier, but that information is missing from various LSM
hooks.
Here we augment the LSM hooks to provide this data, by simply passing
a boolean flag indicating whether or not the call originated in the
kernel, in any hook that contains a bpf_attr struct that corresponds
to a subcommand that may be called from the kernel.
Signed-off-by: Blaise Boscaccy <bboscaccy@linux.microsoft.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250310221737.821889-2-bboscaccy@linux.microsoft.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Anton Protopopov <aspsk@isovalent.com>
Link: https://lore.kernel.org/bpf/20250310032045.651068-1-nichen@iscas.ac.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The Makefile uses the exit code of the `llvm-config --link-static --libs`
command to choose between statically-linked and dynamically-linked LLVMs.
The stdout and stderr of that command are redirected to /dev/null.
To redirect the output the "&>" construction is used, which might not be
supported by /bin/sh, which is executed by make for $(shell ...) commands.
On such systems the test will fail even if static LLVM is actually
supported. Replace "&>" by ">/dev/null 2>&1" to fix this.
Fixes: 2a9d30fac8 ("selftests/bpf: Support dynamically linking LLVM if static is not available")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/bpf/20250310145112.1261241-1-aspsk@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The BPF cpumask selftests are currently run twice in
test_progs/cpumask.c, once by traversing cpumask_success_testcases, and
once by invoking RUN_TESTS(cpumask_success). Remove the invocation of
RUN_TESTS to properly run the selftests only once.
Now that the tests are run only through cpumask_success_testscases, add
to it the missing test_refcount_null_tracking testcase. Also remove the
__success annotation from it, since it is now loaded and invoked by the
runner.
Signed-off-by: Emil Tsalapatis (Meta) <emil@etsalapatis.com>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20250309230427.26603-5-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add selftests for the bpf_cpumask_populate helper that sets a
bpf_cpumask to a bit pattern provided by a BPF program.
Signed-off-by: Emil Tsalapatis (Meta) <emil@etsalapatis.com>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20250309230427.26603-3-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_lwt_seg6local.sh isn't used by the BPF CI.
Add a new file in the test_progs framework to migrate the tests done by
test_lwt_seg6local.sh. It uses the same network topology and the same BPF
programs located in progs/test_lwt_seg6local.c.
Use the network helpers instead of `nc` to exchange the final packet.
Remove test_lwt_seg6local.sh and its Makefile entry.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20250307-seg6local-v1-2-990fff8f180d@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some routes in fb00:: are initialized during setup, even though they
aren't needed by the test as the UDP packets will travel through the
lightweight tunnels.
Remove these unnecessary routes.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20250307-seg6local-v1-1-990fff8f180d@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The caller of cap_enable_effective() expects negative error code.
Fix it.
Before:
failed to restore CAP_SYS_ADMIN: -1, Unknown error -1
After:
failed to restore CAP_SYS_ADMIN: -3, No such process
failed to restore CAP_SYS_ADMIN: -22, Invalid argument
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250305022234.44932-1-yangfeng59949@163.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Traffic monitor thread may see dangling stdout as the main thread closes
and reassigns stdout without protection. This happens when the main thread
finishes one subtest and moves to another one in the same netns_new()
scope.
The issue can be reproduced by running test_progs repeatedly with traffic
monitor enabled:
for ((i=1;i<=100;i++)); do
./test_progs -a flow_dissector_skb* -m '*'
done
For restoring stdout in crash_handler(), since it does not really care
about closing stdout, simlpy flush stdout and restore it to the original
one.
Then, Fix the issue by consolidating stdio_restore_cleanup() and
stdio_restore(), and protecting the use/close/assignment of stdout with
a lock. The locking in the main thread is always performed regradless of
whether traffic monitor is running or not for simplicity. It won't have
any side-effect.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20250305182057.2802606-3-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow users to change traffic monitor's print function. If not provided,
traffic monitor will print to stdout by default.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250305182057.2802606-2-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
reset_affinity() and save_ns() are only called in run_one_test(). There is
no need to call stdio_restore() in reset_affinity() and save_ns() if
stdio_restore() is moved right after a test finishes in run_one_test().
Also remove an unnecessary check of env.stdout_saved in crash_handler()
by moving env.stdout_saved assignment to the beginning of main().
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20250305182057.2802606-1-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_lwt_ip_encap.sh isn't used by the BPF CI.
Add a new file in the test_progs framework to migrate the tests done by
test_lwt_ip_encap.sh. It uses the same network topology and the same BPF
programs located in progs/test_lwt_ip_encap.c.
Rework the GSO part to avoid using nc and dd.
Remove test_lwt_ip_encap.sh and its Makefile entry.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250304-lwt_ip-v1-1-8fdeb9e79a56@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add some basic selftests for qspinlock built over BPF arena using
cond_break_label macro.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250306035431.2186189-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implement queued spin lock algorithm as BPF program for lock words
living in BPF arena.
The algorithm is copied from kernel/locking/qspinlock.c and adapted for
BPF use.
We first implement abstract helpers for portable atomics and
acquire/release load instructions, by relying on X86_64 presence to
elide expensive barriers and rely on implementation details of the JIT,
and fall back to slow but correct implementations elsewhere. When
support for acquire/release load/stores lands, we can improve this
state.
Then, the qspinlock algorithm is adapted to remove dependence on
multi-word atomics due to lack of support in BPF ISA. For instance,
xchg_tail cannot use 16-bit xchg, and needs to be a implemented as a
32-bit try_cmpxchg loop.
Loops which are seemingly infinite from verifier PoV are annotated with
cond_break_label macro to return an error. Only 1024 NR_CPUs are
supported.
Note that the slow path is a global function, hence the verifier doesn't
know the return value's precision. The recommended way of usage is to
always test against zero for success, and not ret < 0 for error, as the
verifier would assume ret > 0 has not been accounted for. Add comments
in the function documentation about this quirk.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250306035431.2186189-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new cond_break_label macro that jumps to the specified label when
the cond_break termination check fires, and allows us to better handle
the uncontrolled termination of the loop.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250306035431.2186189-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
may_goto instruction does not use any registers,
but in compute_insn_live_regs() it was treated as a regular
conditional jump of kind BPF_K with r0 as source register.
Thus unnecessarily marking r0 as used.
Fixes: 14c8552db6 ("bpf: simple DFA-based live registers analysis")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250305085436.2731464-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Compute may-live registers before each instruction in the program.
The register is live before the instruction I if it is read by I or
some instruction S following I during program execution and is not
overwritten between I and S.
This information would be used in the next patch as a hint in
func_states_equal().
Use a simple algorithm described in [1] to compute this information:
- define the following:
- I.use : a set of all registers read by instruction I;
- I.def : a set of all registers written by instruction I;
- I.in : a set of all registers that may be alive before I execution;
- I.out : a set of all registers that may be alive after I execution;
- I.successors : a set of instructions S that might immediately
follow I for some program execution;
- associate separate empty sets 'I.in' and 'I.out' with each instruction;
- visit each instruction in a postorder and update corresponding
'I.in' and 'I.out' sets as follows:
I.out = U [S.in for S in I.successors]
I.in = (I.out / I.def) U I.use
(where U stands for set union, / stands for set difference)
- repeat the computation while I.{in,out} changes for any instruction.
On implementation side keep things as simple, as possible:
- check_cfg() already marks instructions EXPLORED in post-order,
modify it to save the index of each EXPLORED instruction in a vector;
- represent I.{in,out,use,def} as bitmasks;
- don't split the program into basic blocks and don't maintain the
work queue, instead:
- do fixed-point computation by visiting each instruction;
- maintain a simple 'changed' flag if I.{in,out} for any instruction
change;
Measurements show that even such simplistic implementation does not
add measurable verification time overhead (for selftests, at-least).
Note on check_cfg() ex_insn_beg/ex_done change:
To avoid out of bounds access to env->cfg.insn_postorder array,
it should be guaranteed that instruction transitions to EXPLORED state
only once. Previously this was not the fact for incorrect programs
with direct calls to exception callbacks.
The 'align' selftest needs adjustment to skip computed insn/live
registers printout. Otherwise it matches lines from the live registers
printout.
[1] https://en.wikipedia.org/wiki/Live-variable_analysis
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250304195024.2478889-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add several ./test_progs tests:
- arena_atomics/load_acquire
- arena_atomics/store_release
- verifier_load_acquire/*
- verifier_store_release/*
- verifier_precision/bpf_load_acquire
- verifier_precision/bpf_store_release
The last two tests are added to check if backtrack_insn() handles the
new instructions correctly.
Additionally, the last test also makes sure that the verifier
"remembers" the value (in src_reg) we store-release into e.g. a stack
slot. For example, if we take a look at the test program:
#0: r1 = 8;
/* store_release((u64 *)(r10 - 8), r1); */
#1: .8byte %[store_release];
#2: r1 = *(u64 *)(r10 - 8);
#3: r2 = r10;
#4: r2 += r1;
#5: r0 = 0;
#6: exit;
At #1, if the verifier doesn't remember that we wrote 8 to the stack,
then later at #4 we would be adding an unbounded scalar value to the
stack pointer, which would cause the program to be rejected:
VERIFIER LOG:
=============
...
math between fp pointer and register with unbounded min value is not allowed
For easier CI integration, instead of using built-ins like
__atomic_{load,store}_n() which depend on the new
__BPF_FEATURE_LOAD_ACQ_STORE_REL pre-defined macro, manually craft
load-acquire/store-release instructions using __imm_insn(), as suggested
by Eduard.
All new tests depend on:
(1) Clang major version >= 18, and
(2) ENABLE_ATOMICS_TESTS is defined (currently implies -mcpu=v3 or
v4), and
(3) JIT supports load-acquire/store-release (currently arm64 and
x86-64)
In .../progs/arena_atomics.c:
/* 8-byte-aligned */
__u8 __arena_global load_acquire8_value = 0x12;
/* 1-byte hole */
__u16 __arena_global load_acquire16_value = 0x1234;
That 1-byte hole in the .addr_space.1 ELF section caused clang-17 to
crash:
fatal error: error in backend: unable to write nop sequence of 1 bytes
To work around such llvm-17 CI job failures, conditionally define
__arena_global variables as 64-bit if __clang_major__ < 18, to make sure
.addr_space.1 has no holes. Ideally we should avoid compiling this file
using clang-17 at all (arena tests depend on
__BPF_FEATURE_ADDR_SPACE_CAST, and are skipped for llvm-17 anyway), but
that is a separate topic.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/1b46c6feaf0f1b6984d9ec80e500cc7383e9da1a.1741049567.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implement the arch_bpf_timed_may_goto function using inline assembly to
have control over which registers are spilled, and use our special
protocol of using BPF_REG_AX as an argument into the function, and as
the return value when going back.
Emit call depth accounting for the call made from this stub, and ensure
we don't have naked returns (when rethunk mitigations are enabled) by
falling back to the RET macro (instead of retq). After popping all saved
registers, the return address into the BPF program should be on top of
the stack.
Since the JIT support is now enabled, ensure selftests which are
checking the produced may_goto sequences do not break by adjusting them.
Make sure we still test the old may_goto sequence on other
architectures, while testing the new sequence on x86_64.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250304003239.2390751-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
All tests from test_tunnel.sh have been migrated into test test_progs.
The last test remaining in the script is the test_ipip() that is already
covered in the test_prog framework by the NONE case of test_ipip_tunnel().
Remove the test_tunnel.sh script and its Makefile entry
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-10-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ip6tnl tunnels are tested in the test_tunnel.sh but not in the test_progs
framework.
Add a new test in test_progs to test ip6tnl tunnels. It uses the same
network topology and the same BPF programs than the script.
Remove test_ipip6() and test_ip6ip6() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-9-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ip6geneve tunnels are tested in the test_tunnel.sh but not in the
test_progs framework.
Add a new test in test_progs to test ip6geneve tunnels. It uses the same
network topology and the same BPF programs than the script.
Remove test_ip6geneve() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-8-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
geneve tunnels are tested in the test_tunnel.sh but not in the test_progs
framework.
Add a new test in test_progs to test geneve tunnels. It uses the same
network topology and the same BPF programs than the script.
Remove test_geneve() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-7-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ip6erspan tunnels are tested in the test_tunnel.sh but not in the
test_progs framework.
Add a new test in test_progs to test ip6erspan tunnels. It uses the same
network topology and the same BPF programs than the script.
Remove test_ip6erspan() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-6-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
erspan tunnels are tested in the test_tunnel.sh but not in the test_progs
framework.
Add a new test in test_progs to test erspan tunnels. It uses the same
network topology and the same BPF programs than the script.
Remove test_erspan() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-5-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ip6gre tunnels are tested in the test_tunnel.sh but not in the test_progs
framework.
Add a new test in test_progs to test ip6gre tunnels. It uses the same
network topology and the same BPF programs than the script. Disable the
IPv6 DAD feature because it can take lot of time and cause some tests to
fail depending on the environment they're run on.
Remove test_ip6gre() and test_ip6gretap() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-4-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
gre tunnels are tested in the test_tunnel.sh but not in the test_progs
framework.
Add a new test in test_progs to test gre tunnels. It uses the same
network topology and the same BPF programs than the script.
Remove test_gre() and test_gre_no_tunnel_key() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-3-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
All tests use more or less the same ping commands as final validation.
Also test_ping()'s return value is checked with ASSERT_OK() while this
check is already done by the SYS() macro inside test_ping().
Create helpers around test_ping() and use them in the tests to avoid code
duplication.
Remove the unnecessary ASSERT_OK() from the tests.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-2-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A fair amount of code duplication is present among tests to attach BPF
programs.
Create generic_attach* helpers that attach BPF programs to a given
interface.
Use ASSERT_OK_FD() instead of ASSERT_GE() to check fd's validity.
Use these helpers in all the available tests.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-1-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In order not to pollute CSV output, e.g.:
$ ./veristat -o csv exceptions_ext.bpf.o > test.csv
Using guessed program type 'sched_cls' for exceptions_ext.bpf.o/extension...
Using guessed program type 'sched_cls' for exceptions_ext.bpf.o/throwing_extension...
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Mykyta Yatsenko <mykyta.yatsenko5@gmail.com>
Link: https://lore.kernel.org/bpf/20250301000147.1583999-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Before:
./veristat -G @foobar iters.bpf.o
Failed to open presets in 'foobar': Unknown error -2
...
After:
./veristat -G @foobar iters.bpf.o
Failed to open presets in 'foobar': No such file or directory
...
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Mykyta Yatsenko <mykyta.yatsenko5@gmail.com>
Link: https://lore.kernel.org/bpf/20250301000147.1583999-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow reading object file list from file.
E.g. the following command:
./veristat @list.txt
Is equivalent to the following invocation:
./veristat line-1 line-2 ... line-N
Where line-i corresponds to lines from list.txt.
Lines starting with '#' are ignored.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Mykyta Yatsenko <mykyta.yatsenko5@gmail.com>
Link: https://lore.kernel.org/bpf/20250301000147.1583999-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add tests for freplace behavior with the combination of sleepable
and non-sleepable global subprogs. The changes_pkt_data selftest
did all the hardwork, so simply rename it and include new support
for more summarization tests for might_sleep bit.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250301151846.1552362-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add tests for rejecting sleepable and accepting non-sleepable global
function calls in atomic contexts. For spin locks, we still reject
all global function calls. Once resilient spin locks land, we will
carefully lift in cases where we deem it safe.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250301151846.1552362-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_select_reuseport_kern.c is currently including <stdlib.h>, but it
does not use any definition from there.
Remove stdlib.h inclusion from test_select_reuseport_kern.c
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250227-remove_wrong_header-v1-1-bc94eb4e2f73@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmfOKBUeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1aQH/iC+Oyij4VxAjBek
BOXIT/p6CwlIXb8ObiWWcRjDPizlcxb3RaV8J2RO+IqaQ2wltxpFANq2G7Re2FPm
SNcEpIURAOVcxHGedcfFA91srO5F4FzNTO8LVp7MIbcgMYy3pdk+dbZmi6A691R+
t9pb74m+MAnF1o/MUx7pUlhAT/4ymuuR0F7WCSg4h0Xwe5m0nlJY89kJBC7PCjyd
n3mdhsz3rDSLmt/z/T7HGD89r8sYSvm9cOKtL3ELgGTrm7boQV8ii9Y9w04DI8PQ
JmIernugcCxmhH36mVUAHgJf2+/T388xFUh/D5+skeUOUZpaJZG866rnb32WpsHc
eWLFUeg=
=Wypt
-----END PGP SIGNATURE-----
Merge 6.14-rc6 into driver-core-next
We need the driver core fix in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCZ8qHFwAKCRAraS+Z+3y5
E6QRAQCI/irYxpT6nBgT3ejyO6CIHjbHjdNP5KRkE8JT61zmJgD8Diet4dwwOxLK
c1Pq5Jnl9KLpEPG99TcjtH3c++N3fww=
=ltml
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-03-06
We've added 6 non-merge commits during the last 13 day(s) which contain
a total of 6 files changed, 230 insertions(+), 56 deletions(-).
The main changes are:
1) Add XDP metadata support for tun driver, from Marcus Wichelmann.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Fix file descriptor assertion in open_tuntap helper
selftests/bpf: Add test for XDP metadata support in tun driver
selftests/bpf: Refactor xdp_context_functional test and bpf program
selftests/bpf: Move open_tuntap to network helpers
net: tun: Enable transfer of XDP metadata to skb
net: tun: Enable XDP metadata support
====================
Link: https://patch.msgid.link/20250307055335.441298-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The open_tuntap helper function uses open() to get a file descriptor for
/dev/net/tun.
The open(2) manpage writes this about its return value:
On success, open(), openat(), and creat() return the new file
descriptor (a nonnegative integer). On error, -1 is returned and
errno is set to indicate the error.
This means that the fd > 0 assertion in the open_tuntap helper is
incorrect and should rather check for fd >= 0.
When running the BPF selftests locally, this incorrect assertion was not
an issue, but the BPF kernel-patches CI failed because of this:
open_tuntap:FAIL:open(/dev/net/tun) unexpected open(/dev/net/tun):
actual 0 <= expected 0
Signed-off-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250305213438.3863922-7-marcus.wichelmann@hetzner-cloud.de
Add a selftest that creates a tap device, attaches XDP and TC programs,
writes a packet with a test payload into the tap device and checks the
test result. This test ensures that the XDP metadata support in the tun
driver is enabled and that the metadata size is correctly passed to the
skb.
See the previous commit ("selftests/bpf: refactor xdp_context_functional
test and bpf program") for details about the test design.
The test runs in its own network namespace. This provides some extra
safety against conflicting interface names.
Signed-off-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250305213438.3863922-6-marcus.wichelmann@hetzner-cloud.de
The existing XDP metadata test works by creating a veth pair and
attaching XDP & TC programs that drop the packet when the condition of
the test isn't fulfilled. The test then pings through the veth pair and
succeeds when the ping comes through.
While this test works great for a veth pair, it is hard to replicate for
tap devices to test the XDP metadata support of them. A similar test for
the tun driver would either involve logic to reply to the ping request,
or would have to capture the packet to check if it was dropped or not.
To make the testing of other drivers easier while still maximizing code
reuse, this commit refactors the existing xdp_context_functional test to
use a test_result map. Instead of conditionally passing or dropping the
packet, the TC program is changed to copy the received metadata into the
value of that single-entry array map. Tests can then verify that the map
value matches the expectation.
This testing logic is easy to adapt to other network drivers as the only
remaining requirement is that there is some way to send a custom
Ethernet packet through it that triggers the XDP & TC programs.
The Ethernet header of that custom packet is all-zero, because it is not
required to be valid for the test to work. The zero ethertype also helps
to filter out packets that are not related to the test and would
otherwise interfere with it.
The payload of the Ethernet packet is used as the test data that is
expected to be passed as metadata from the XDP to the TC program and
written to the map. It has a fixed size of 32 bytes which is a
reasonable size that should be supported by both drivers. Additional
packet headers are not necessary for the test and were therefore skipped
to keep the testing code short.
This new testing methodology no longer requires the veth interfaces to
have IP addresses assigned, therefore these were removed.
Signed-off-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250305213438.3863922-5-marcus.wichelmann@hetzner-cloud.de
To test the XDP metadata functionality of the tun driver, it's necessary
to create a new tap device first. A helper function for this already
exists in lwt_helpers.h. Move it to the common network helpers header,
so it can be reused in other tests.
Signed-off-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250305213438.3863922-4-marcus.wichelmann@hetzner-cloud.de
Introducing test for veristat, part of test_progs.
Test cases cover functionality of setting global variables in BPF
program.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20250225163101.121043-3-mykyta.yatsenko5@gmail.com
To better verify some complex BPF programs we'd like to preset global
variables.
This patch introduces CLI argument `--set-global-vars` or `-G` to
veristat, that allows presetting values to global variables defined
in BPF program. For example:
prog.c:
```
enum Enum { ELEMENT1 = 0, ELEMENT2 = 5 };
const volatile __s64 a = 5;
const volatile __u8 b = 5;
const volatile enum Enum c = ELEMENT2;
const volatile bool d = false;
char arr[4] = {0};
SEC("tp_btf/sched_switch")
int BPF_PROG(...)
{
bpf_printk("%c\n", arr[a]);
bpf_printk("%c\n", arr[b]);
bpf_printk("%c\n", arr[c]);
bpf_printk("%c\n", arr[d]);
return 0;
}
```
By default verification of the program fails:
```
./veristat prog.bpf.o
```
By presetting global variables, we can make verification pass:
```
./veristat wq.bpf.o -G "a = 0" -G "b = 1" -G "c = 2" -G "d = 3"
```
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20250225163101.121043-2-mykyta.yatsenko5@gmail.com
Update usdt tests to also check for correct behavior of
bpf_usdt_arg_size().
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20250224235756.2612606-2-ihor.solodrai@linux.dev
Add netns cookie test that verifies the helper is now supported and work
in the context of cgroup_skb programs.
Signed-off-by: Mahe Tardy <mahe.tardy@gmail.com>
Link: https://lore.kernel.org/r/20250225125031.258740-2-mahe.tardy@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test gen_prologue and gen_epilogue that generate kfuncs that have not
been seen in the main program.
The main bpf program and return value checks are identical to
pro_epilogue.c introduced in commit 47e69431b5 ("selftests/bpf: Test
gen_prologue and gen_epilogue"). However, now when bpf_testmod_st_ops
detects a program name with prefix "test_kfunc_", it generates slightly
different prologue and epilogue: They still add 1000 to args->a in
prologue, add 10000 to args->a and set r0 to 2 * args->a in epilogue,
but involve kfuncs.
At high level, the alternative version of prologue and epilogue look
like this:
cgrp = bpf_cgroup_from_id(0);
if (cgrp)
bpf_cgroup_release(cgrp);
else
/* Perform what original bpf_testmod_st_ops prologue or
* epilogue does
*/
Since 0 is never a valid cgroup id, the original prologue or epilogue
logic will be performed. As a result, the __retval check should expect
the exact same return value.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250225233545.285481-2-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Fix tools/ quiet build Makefile infrastructure that was broken when
working on tools/perf/ without testing on other tools/ living
utilities.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZ74OJwAKCRCyPKLppCJ+
J30mAPsHCA8A+CNq/5yW2VhFLV1GgCSL5oWqxXRn7QjhSrCQBQEAot2u4O5zXs7M
sg+mPlYiS1oT+zmvTLlXrN+bVyWP9A4=
=jH1N
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.14-2-2025-02-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix tools/ quiet build Makefile infrastructure that was broken when
working on tools/perf/ without testing on other tools/ living
utilities.
* tag 'perf-tools-fixes-for-v6.14-2-2025-02-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
tools: Remove redundant quiet setup
tools: Unify top-level quiet infrastructure
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCZ7ffOQAKCRAraS+Z+3y5
EzVHAP9h/QkeYoOZW9gul08I8vFiZsFe/lbOSLJWxeVfxb9JhgD/cMqby3qAxQK6
lsdNQ9jYG2232Wym89ag7fvTBK15Wg4=
=gkN2
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-02-20
We've added 19 non-merge commits during the last 8 day(s) which contain
a total of 35 files changed, 1126 insertions(+), 53 deletions(-).
The main changes are:
1) Add TCP_RTO_MAX_MS support to bpf_set/getsockopt, from Jason Xing
2) Add network TX timestamping support to BPF sock_ops, from Jason Xing
3) Add TX metadata Launch Time support, from Song Yoong Siang
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
igc: Add launch time support to XDP ZC
igc: Refactor empty frame insertion for launch time support
net: stmmac: Add launch time support to XDP ZC
selftests/bpf: Add launch time request to xdp_hw_metadata
xsk: Add launch time hardware offload support to XDP Tx metadata
selftests/bpf: Add simple bpf tests in the tx path for timestamping feature
bpf: Support selective sampling for bpf timestamping
bpf: Add BPF_SOCK_OPS_TSTAMP_SENDMSG_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_ACK_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SND_HW_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SND_SW_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SCHED_CB callback
net-timestamp: Prepare for isolating two modes of SO_TIMESTAMPING
bpf: Disable unsafe helpers in TX timestamping callbacks
bpf: Prevent unsafe access to the sock fields in the BPF timestamping callback
bpf: Prepare the sock_ops ctx and call bpf prog for TX timestamping
bpf: Add networking timestamping support to bpf_get/setsockopt()
selftests/bpf: Add rto max for bpf_setsockopt test
bpf: Support TCP_RTO_MAX_MS for bpf_setsockopt
====================
Link: https://patch.msgid.link/20250221022104.386462-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test if the verifier rejects struct_ops program with __ref argument
calling bpf_tail_call().
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250220221532.1079331-2-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Fix a soft-lockup in BPF arena_map_free on 64k page size
kernels (Alan Maguire)
- Fix a missing allocation failure check in BPF verifier's
acquire_lock_state (Kumar Kartikeya Dwivedi)
- Fix a NULL-pointer dereference in trace_kfree_skb by adding
kfree_skb to the raw_tp_null_args set (Kuniyuki Iwashima)
- Fix a deadlock when freeing BPF cgroup storage (Abel Wu)
- Fix a syzbot-reported deadlock when holding BPF map's
freeze_mutex (Andrii Nakryiko)
- Fix a use-after-free issue in bpf_test_init when
eth_skb_pkt_type is accessing skb data not containing an
Ethernet header (Shigeru Yoshida)
- Fix skipping non-existing keys in generic_map_lookup_batch
(Yan Zhai)
- Several BPF sockmap fixes to address incorrect TCP copied_seq
calculations, which prevented correct data reads from recv(2)
in user space (Jiayuan Chen)
- Two fixes for BPF map lookup nullness elision (Daniel Xu)
- Fix a NULL-pointer dereference from vmlinux BTF lookup in
bpf_sk_storage_tracing_allowed (Jared Kangas)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
iIsEABYKADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZ7evlRUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISIPwHgD/dTvM00Ck4Q73fPivyT7tcqxeXJlD
D6ggzWl/SG9LAbwA/2/cSgAM9Jm1g7ddvn/S9QaDYOs5GmFl6urq6krs+tYD
=FCs9
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull BPF fixes from Daniel Borkmann:
- Fix a soft-lockup in BPF arena_map_free on 64k page size kernels
(Alan Maguire)
- Fix a missing allocation failure check in BPF verifier's
acquire_lock_state (Kumar Kartikeya Dwivedi)
- Fix a NULL-pointer dereference in trace_kfree_skb by adding kfree_skb
to the raw_tp_null_args set (Kuniyuki Iwashima)
- Fix a deadlock when freeing BPF cgroup storage (Abel Wu)
- Fix a syzbot-reported deadlock when holding BPF map's freeze_mutex
(Andrii Nakryiko)
- Fix a use-after-free issue in bpf_test_init when eth_skb_pkt_type is
accessing skb data not containing an Ethernet header (Shigeru
Yoshida)
- Fix skipping non-existing keys in generic_map_lookup_batch (Yan Zhai)
- Several BPF sockmap fixes to address incorrect TCP copied_seq
calculations, which prevented correct data reads from recv(2) in user
space (Jiayuan Chen)
- Two fixes for BPF map lookup nullness elision (Daniel Xu)
- Fix a NULL-pointer dereference from vmlinux BTF lookup in
bpf_sk_storage_tracing_allowed (Jared Kangas)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests: bpf: test batch lookup on array of maps with holes
bpf: skip non exist keys in generic_map_lookup_batch
bpf: Handle allocation failure in acquire_lock_state
bpf: verifier: Disambiguate get_constant_map_key() errors
bpf: selftests: Test constant key extraction on irrelevant maps
bpf: verifier: Do not extract constant map keys for irrelevant maps
bpf: Fix softlockup in arena_map_free on 64k page kernel
net: Add rx_skb of kfree_skb to raw_tp_null_args[].
bpf: Fix deadlock when freeing cgroup storage
selftests/bpf: Add strparser test for bpf
selftests/bpf: Fix invalid flag of recv()
bpf: Disable non stream socket for strparser
bpf: Fix wrong copied_seq calculation
strparser: Add read_sock callback
bpf: avoid holding freeze_mutex during mmap operation
bpf: unify VM_WRITE vs VM_MAYWRITE use in BPF map mmaping logic
selftests/bpf: Adjust data size to have ETH_HLEN
bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()
bpf: Remove unnecessary BTF lookups in bpf_sk_storage_tracing_allowed
Add launch time hardware offload request to xdp_hw_metadata. Users can
configure the delta of launch time relative to HW RX-time using the "-l"
argument. By default, the delta is set to 0 ns, which means the launch time
is disabled. By setting the delta to a non-zero value, the launch time
hardware offload feature will be enabled and requested. Additionally, users
can configure the Tx Queue to be enabled with the launch time hardware
offload using the "-L" argument. By default, Tx Queue 0 will be used.
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250216093430.957880-3-yoong.siang.song@intel.com
BPF program calculates a couple of latency deltas between each tx
timestamping callbacks. It can be used in the real world to diagnose
the kernel behaviour in the tx path.
Check the safety issues by accessing a few bpf calls in
bpf_test_access_bpf_calls() which are implemented in the patch 3 and 4.
Check if the bpf timestamping can co-exist with socket timestamping.
There remains a few realistic things[1][2] to highlight:
1. in general a packet may pass through multiple qdiscs. For instance
with bonding or tunnel virtual devices in the egress path.
2. packets may be resent, in which case an ACK might precede a repeat
SCHED and SND.
3. erroneous or malicious peers may also just never send an ACK.
[1]: https://lore.kernel.org/all/67a389af981b0_14e0832949d@willemb.c.googlers.com.notmuch/
[2]: https://lore.kernel.org/all/c329a0c1-239b-4ca1-91f2-cb30b8dd2f6a@linux.dev/
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-13-kerneljasonxing@gmail.com
The kprobe_multi feature was disabled on ARM64 due to the lack of fprobe
support.
The fprobe rewrite on function_graph has been recently merged and thus
brought support for fprobes on arm64. This then enables kprobe_multi
support on arm64, and so the corresponding tests can now be run on this
architecture.
Remove the tests depending on kprobe_multi from DENYLIST.aarch64 to
allow those to run in CI. CONFIG_FPROBE is already correctly set in
tools/testing/selftests/bpf/config
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250219-enable_kprobe_multi_tests-v1-1-faeec99240c8@bootlin.com
Two subtests use the test_in_netns() function to run the test in a
dedicated network namespace. This can now be done directly through the
test_progs framework with a test name starting with 'ns_'.
Replace the use of test_in_netns() by test_ns_* calls.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20250219-b4-tc_links-v2-4-14504db136b7@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tests are serialized because they all use the loopback interface.
Replace the 'serial_test_' prefixes with 'test_ns_' to benefit from the
new test_prog feature which creates a dedicated namespace for each test,
allowing them to run in parallel.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20250219-b4-tc_links-v2-3-14504db136b7@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some tests are serialized to prevent interference with others.
Open a dedicated network namespace when a test name starts with 'ns_' to
allow more test parallelization. Use the test name as namespace name to
avoid conflict between namespaces.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20250219-b4-tc_links-v2-2-14504db136b7@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Next patch will add a new feature to test_prog to run tests in a
dedicated namespace if the test name starts with 'ns_'. Here the test
name already starts with 'ns_' and creates some namespaces which would
conflict with the new feature.
Rename the test to avoid this conflict.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20250219-b4-tc_links-v2-1-14504db136b7@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A test case with ridiculously deep bpf_for() nesting and
a conditional update of a stack location.
Consider the innermost loop structure:
1: bpf_for(o, 0, 10)
2: if (unlikely(bpf_get_prandom_u32()))
3: buf[0] = 42;
4: <exit>
Assuming that verifier.c:clean_live_states() operates w/o change from
the previous patch (e.g. as on current master) verification would
proceed as follows:
- at (1) state {buf[0]=?,o=drained}:
- checkpoint
- push visit to (2) for later
- at (4) {buf[0]=?,o=drained}
- pop (2) {buf[0]=?,o=active}, push visit to (3) for later
- at (1) {buf[0]=?,o=active}
- checkpoint
- push visit to (2) for later
- at (4) {buf[0]=?,o=drained}
- pop (2) {buf[0]=?,o=active}, push visit to (3) for later
- at (1) {buf[0]=?,o=active}:
- checkpoint reached, checkpoint's branch count becomes 0
- checkpoint is processed by clean_live_states() and
becomes {o=active}
- pop (3) {buf[0]=42,o=active}
- at (1), {buf[0]=42,o=active}
- checkpoint
- push visit to (2) for later
- at (4) {buf[0]=42,o=drained}
- pop (2) {buf[0]=42,o=active}, push visit to (3) for later
- at (1) {buf[0]=42,o=active}, checkpoint reached
- pop (3) {buf[0]=42,o=active}
- at (1) {buf[0]=42,o=active}:
- checkpoint reached, checkpoint's branch count becomes 0
- checkpoint is processed by clean_live_states() and
becomes {o=active}
- ...
Note how clean_live_states() converted the checkpoint
{buf[0]=42,o=active} to {o=active} and it can no longer be matched
against {buf[0]=<any>,o=active}, because iterator based states
are compared using stacksafe(... RANGE_WITHIN), that requires
stack slots to have same types. At the same time there are
still states {buf[0]=42,o=active} pushed to DFS stack.
This behaviour becomes exacerbated with multiple nesting levels,
here are veristat results:
- nesting level 1: 69 insns
- nesting level 2: 258 insns
- nesting level 3: 900 insns
- nesting level 4: 4754 insns
- nesting level 5: 35944 insns
- nesting level 6: 312558 insns
- nesting level 7: 1M limit
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250215110411.3236773-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A somewhat cumbersome test case sensitive to correct copying of
bpf_verifier_state->loop_entry fields in
verifier.c:copy_verifier_state().
W/o the fix from a previous commit the program is accepted as safe.
1: /* poison block */
2: if (random() != 24) { // assume false branch is placed first
3: i = iter_new();
4: while (iter_next(i));
5: iter_destroy(i);
6: return;
7: }
8:
9: /* dfs_depth block */
10: for (i = 10; i > 0; i--);
11:
12: /* main block */
13: i = iter_new(); // fp[-16]
14: b = -24; // r8
15: for (;;) {
16: if (iter_next(i))
17: break;
18: if (random() == 77) { // assume false branch is placed first
19: *(u64 *)(r10 + b) = 7; // this is not safe when b == -25
20: iter_destroy(i);
21: return;
22: }
23: if (random() == 42) { // assume false branch is placed first
24: b = -25;
25: }
26: }
27: iter_destroy(i);
The goal of this example is to:
(a) poison env->cur_state->loop_entry with a state S,
such that S->branches == 0;
(b) set state S as a loop_entry for all checkpoints in
/* main block */, thus forcing NOT_EXACT states comparisons;
(c) exploit incorrect loop_entry set for checkpoint at line 18
by first creating a checkpoint with b == -24 and then
pruning the state with b == -25 using that checkpoint.
The /* poison block */ is responsible for goal (a).
It forces verifier to first validate some unrelated iterator based
loop, which leads to an update_loop_entry() call in is_state_visited(),
which places checkpoint created at line 4 as env->cur_state->loop_entry.
Starting from line 8, the branch count for that checkpoint is 0.
The /* dfs_depth block */ is responsible for goal (b).
It abuses the fact that update_loop_entry(cur, hdr) only updates
cur->loop_entry when hdr->dfs_depth <= cur->dfs_depth.
After line 12 every state has dfs_depth bigger then dfs_depth of
poisoned env->cur_state->loop_entry. Thus the above condition is never
true for lines 12-27.
The /* main block */ is responsible for goal (c).
Verification proceeds as follows:
- checkpoint {b=-24,i=active} created at line 16;
- jump 18->23 is verified first, jump to 19 pushed to stack;
- jump 23->26 is verified first, jump to 24 pushed to stack;
- checkpoint {b=-24,i=active} created at line 15;
- current state is pruned by checkpoint created at line 16,
this sets branches count for checkpoint at line 15 to 0;
- jump to 24 is popped from stack;
- line 16 is reached in state {b=-25,i=active};
- this is pruned by a previous checkpoint {b=-24,i=active}:
- checkpoint's loop_entry is poisoned and has branch count of 0,
hence states are compared using NOT_EXACT rules;
- b is not marked precise yet.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250215110411.3236773-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The tests done by test_xdp_redirect_multi.sh are now fully covered by
the CI through test_xdp_veth.c.
Remove test_xdp_redirect_multi.sh
Remove xdp_redirect_multi.c that was used by the script to load and
attach the BPF programs.
Remove their entries in the Makefile
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250212-redirect-multi-v5-6-fd0d39fca6e6@bootlin.com
XDP programs loaded on egress is tested by test_xdp_redirect_multi.sh
but not by the test_progs framework.
Add a test case in test_xdp_veth.c to test the XDP program on egress.
Use the same BPF program than test_xdp_redirect_multi.sh that replaces
the source MAC address by one provided through a BPF map.
Use a BPF program that stores the source MAC of received packets in a
map to check the test results.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250212-redirect-multi-v5-5-fd0d39fca6e6@bootlin.com
XDP redirections with BPF_F_BROADCAST and BPF_F_EXCLUDE_INGRESS flags
are tested by test_xdp_redirect_multi.sh but not within the test_progs
framework.
Add a broadcast test case in test_xdp_veth.c to test them.
Use the same BPF programs than the one used by
test_xdp_redirect_multi.sh.
Use a BPF map to select the broadcast flags.
Use a BPF map with an entry per veth to check whether packets are
received or not
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250212-redirect-multi-v5-4-fd0d39fca6e6@bootlin.com
Broadcasting flags are hardcoded for each kind for protocol.
Create a redirect_flags map that allows to select the broadcasting flags
to use in the bpf_redirect_map(). The protocol ID is used as a key.
Set the old hardcoded values as default if the map isn't filled by the
BPF caller.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250212-redirect-multi-v5-3-fd0d39fca6e6@bootlin.com
Tests use the root network namespace, so they aren't fully independent
of each other. For instance, the index of the created veth interfaces
is incremented every time a new test is launched.
Wrap the network topology in a network namespace to ensure full
isolation. Use the append_tid() helper to ensure the uniqueness of this
namespace's name during parallel runs.
Remove the use of the append_tid() on the veth names as they now belong
to an already unique namespace.
Simplify cleanup_network() by directly deleting the namespaces
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250212-redirect-multi-v5-2-fd0d39fca6e6@bootlin.com
The network configuration is defined by a table of struct
veth_configuration. This isn't convenient if we want to add a network
configuration that isn't linked to a veth pair.
Create a struct net_configuration that holds the veth_configuration
table to ease adding new configuration attributes in upcoming patch.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250212-redirect-multi-v5-1-fd0d39fca6e6@bootlin.com
Q is exported from Makefile.include so it is not necessary to manually
set it.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Benjamin Tissoires <bentiss@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Mykola Lysenko <mykolal@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20250213-quiet_tools-v3-2-07de4482a581@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Verify that for a connectible AF_VSOCK socket, merely having a transport
assigned is insufficient; socket must be connected for the sockmap to
accept.
This does not test datagram vsocks. Even though it hardly matters. VMCI is
the only transport that features VSOCK_TRANSPORT_F_DGRAM, but it has an
unimplemented vsock_transport::readskb() callback, making it unsupported by
BPF/sockmap.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 515745445e ("selftest/bpf: Add test for vsock removal from sockmap
on close()") added test that checked if proto::close() callback was invoked
on AF_VSOCK socket release. I.e. it verified that a close()d vsock does
indeed get removed from the sockmap.
It was done simply by creating a socket pair and attempting to replace a
close()d one with its peer. Since, due to a recent change, sockmap does not
allow updating index with a non-established connectible vsock, redo it with
a freshly established one.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Test struct_ops programs returning referenced kptr. When the return type
of a struct_ops operator is pointer to struct, the verifier should
only allow programs that return a scalar NULL or a non-local kptr with the
correct type in its unmodified form.
Signed-off-by: Amery Hung <amery.hung@bytedance.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250217190640.1748177-6-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test referenced kptr acquired through struct_ops argument tagged with
"__ref". The success case checks whether 1) a reference to the correct
type is acquired, and 2) the referenced kptr argument can be accessed in
multiple paths as long as it hasn't been released. In the fail cases,
we first confirm that a referenced kptr acquried through a struct_ops
argument is not allowed to be leaked. Then, we make sure this new
referenced kptr acquiring mechanism does not accidentally allow referenced
kptrs to flow into global subprograms through their arguments.
Signed-off-by: Amery Hung <amery.hung@bytedance.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250217190640.1748177-4-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
kernfs_rename_lock is used to obtain stable kernfs_node::{name|parent}
pointer. This is a preparation to access kernfs_node::parent under RCU
and ensure that the pointer remains stable under the RCU lifetime
guarantees.
For a complete path, as it is done in kernfs_path_from_node(), the
kernfs_rename_lock is still required in order to obtain a stable parent
relationship while computing the relevant node depth. This must not
change while the nodes are inspected in order to build the path.
If the kernfs user never moves the nodes (changes the parent) then the
kernfs_rename_lock is not required and the RCU guarantees are
sufficient. This "restriction" can be set with
KERNFS_ROOT_INVARIANT_PARENT. Otherwise the lock is required.
Rename kernfs_node::parent to kernfs_node::__parent to denote the RCU
access and use RCU accessor while accessing the node.
Make cgroup use KERNFS_ROOT_INVARIANT_PARENT since the parent here can
not change.
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250213145023.2820193-6-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a simple repro for the issue of miscalculating LDX/STX/ST CO-RE
relocation size adjustment when the CO-RE relocation target type is an
ARRAY.
We need to make sure that compiler generates LDX/STX/ST instruction with
CO-RE relocation against entire ARRAY type, not ARRAY's element. With
the code pattern in selftest, we get this:
59: 61 71 00 00 00 00 00 00 w1 = *(u32 *)(r7 + 0x0)
00000000000001d8: CO-RE <byte_off> [5] struct core_reloc_arrays::a (0:0)
Where offset of `int a[5]` is embedded (through CO-RE relocation) into memory
load instruction itself.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20250207014809.1573841-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Added test cases to ensure that programs with stack sizes exceeding 512
bytes are restricted in non-JITed mode, and can be executed normally in
JITed mode, even with stack sizes exceeding 512 bytes due to the presence
of may_goto instructions.
Test result:
echo "0" > /proc/sys/net/core/bpf_jit_enable
./test_progs -t verifier_stack_ptr
...
stack size 512 with may_goto with jit:SKIP
stack size 512 with may_goto without jit:OK
...
Summary: 1/27 PASSED, 25 SKIPPED, 0 FAILED
echo "1" > /proc/sys/net/core/bpf_jit_enable
./test_progs -t verifier_stack_ptr
...
stack size 512 with may_goto with jit:OK
stack size 512 with may_goto without jit:SKIP
...
Summary: 1/27 PASSED, 25 SKIPPED, 0 FAILED
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Link: https://lore.kernel.org/r/20250214091823.46042-4-mrpre@163.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In some cases, the verification logic under the interpreter and JIT
differs, such as may_goto, and the test program behaves differently under
different runtime modes, requiring separate verification logic for each
result.
Introduce __load_if_JITed and __load_if_no_JITed annotation for tests.
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Link: https://lore.kernel.org/r/20250214091823.46042-3-mrpre@163.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Two sets of tests are added to exercise the not _locked and _locked
version of the kfuncs. For both tests, user space accesses xattr
security.bpf.foo on a testfile. The BPF program is triggered by user
space access (on LSM hook inode_[set|get]_xattr) and sets or removes
xattr security.bpf.bar. Then user space then validates that xattr
security.bpf.bar is set or removed as expected.
Note that, in both tests, the BPF programs use the not _locked kfuncs.
The verifier picks the proper kfuncs based on the calling context.
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250130213549.3353349-6-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extend test_progs fs_kfuncs to cover different xattr names. Specifically:
xattr name "user.kfuncs" and "security.bpf.xxx" can be read from BPF
program with kfuncs bpf_get_[file|dentry]_xattr(); while "security.bpf"
and "security.selinux" cannot be read.
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250130213549.3353349-3-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fix a race condition between the main test_progs thread and the traffic
monitoring thread. The traffic monitor thread tries to print a line
using multiple printf and use flockfile() to prevent the line from being
torn apart. Meanwhile, the main thread doing io redirection can reassign
or close stdout when going through tests. A deadlock as shown below can
happen.
main traffic_monitor_thread
==== ======================
show_transport()
-> flockfile(stdout)
stdio_hijack_init()
-> stdout = open_memstream(log_buf, log_cnt);
...
env.subtest_state->stdout_saved = stdout;
...
funlockfile(stdout)
stdio_restore_cleanup()
-> fclose(env.subtest_state->stdout_saved);
After the traffic monitor thread lock stdout, A new memstream can be
assigned to stdout by the main thread. Therefore, the traffic monitor
thread later will not be able to unlock the original stdout. As the
main thread tries to access the old stdout, it will hang indefinitely
as it is still locked by the traffic monitor thread.
The deadlock can be reproduced by running test_progs repeatedly with
traffic monitor enabled:
for ((i=1;i<=100;i++)); do
./test_progs -a flow_dissector_skb* -m '*'
done
Fix this by only calling printf once and remove flockfile()/funlockfile().
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250213233217.553258-1-ameryhung@gmail.com
On powerpc, a CPU does not necessarily originate from NUMA node 0.
This contrasts with architectures like x86, where CPU 0 is not
hot-pluggable, making NUMA node 0 a consistently valid node.
This discrepancy can lead to failures when creating a map on NUMA
node 0, which is initialized by default, if no CPUs are allocated
from NUMA node 0.
This patch fixes the issue by setting NUMA_NO_NODE (-1) for map
creation for this selftest.
Fixes: 96eabe7a40 ("bpf: Allow selecting numa node during map creation")
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/cf1f61468b47425ecf3728689bc9636ddd1d910e.1738302337.git.skb99@linux.ibm.com
Since commit 7e92e01b72 ("powerpc: Provide syscall wrapper")
landed in v6.1, syscall wrapper is enabled on powerpc. Commit
9474689020 ("powerpc: Don't add __powerpc_ prefix to syscall
entry points") , that drops the prefix to syscall entry points,
also landed in the same release. So, add the missing empty
SYS_PREFIX prefix definition for powerpc, to fix some fentry
and kprobe selftests.
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/7192d6aa9501115dc242435970df82b3d190f257.1738302337.git.skb99@linux.ibm.com
Those two scripts were used by test_flow_dissector.sh to setup/cleanup
the network topology before/after the tests. test_flow_dissector.sh
have been deleted by commit 63b37657c5 ("selftests/bpf: remove
test_flow_dissector.sh") so they aren't used anywhere now.
Remove the two unused scripts and their Makefile entries.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250204-with-v1-1-387a42118cd4@bootlin.com
Since 67ab80a018 ("selftests/bpf: Prefer static linking for LLVM
libraries"), only statically linking test_progs is supported. However,
some distros only provide a dynamically linkable LLVM.
This commit adds a fallback for dynamically linking LLVM if static
linking is not available. If both options are available, static linking
is chosen.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/872b64e93de9a6cd6a7a10e6a5c5e7893704f743.1738276344.git.dxu@dxuuu.xyz
Add a BTF verification test case for a type_tag with a kflag set.
Type tags with a kflag are now valid.
Add BTF_DECL_ATTR_ENC and BTF_TYPE_ATTR_ENC test helper macros,
corresponding to *_TAG_ENC.
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250130201239.1429648-7-ihor.solodrai@linux.dev
BTF type tags and decl tags now may have info->kflag set to 1,
changing the semantics of the tag.
Change BTF verification to permit BTF that makes use of this feature:
* remove kflag check in btf_decl_tag_check_meta(), as both values
are valid
* allow kflag to be set for BTF_KIND_TYPE_TAG type in
btf_ref_type_check_meta()
Make sure kind_flag is NOT set when checking for specific BTF tags,
such as "kptr", "user" etc.
Modify a selftest checking for kflag in decl_tag accordingly.
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20250130201239.1429648-6-ihor.solodrai@linux.dev
Factor out common routines handling custom BTF from
test_btf_dump_incremental. Then use them in the
test_btf_dump_type_tags.
test_btf_dump_type_tags verifies that a type tag is dumped correctly
with respect to its kflag.
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20250130201239.1429648-5-ihor.solodrai@linux.dev
The XDP redirection is tested without any flag provided to the
xdp_attach() function.
Add two subtests that check the correct behaviour with
XDP_FLAGS_{DRV/SKB}_MODE flags
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250131-redirect-multi-v4-10-970b33678512@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The network namespaces and the veth used by the tests have hardcoded
names that can conflict with other tests during parallel runs.
Use the append_tid() helper to ensure the uniqueness of these names.
Use the static network configuration table as a template on which
thread IDs are appended in each test.
Set a fixed size to remote_addr field so the struct veth_configuration
can also have a fixed size.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250131-redirect-multi-v4-9-970b33678512@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
XDP flags are hardcoded to 0 at attachment.
Add flags attributes to the struct prog_configuration to allow flag
modifications for each test case.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250131-redirect-multi-v4-8-970b33678512@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The BPF program attached to each veth is hardcoded through the
use of the struct skeletons. It prevents from re-using the initialization
code in new test cases.
Replace the struct skeletons by a bpf_object table.
Add a struct prog_configuration that holds the name of BPF program to
load on a given veth pair.
Use bpf_object__find_program_by_name() / bpf_xdp_attach() API instead of
bpf_program__attach_xdp() to retrieve the BPF programs from their names.
Detach BPF progs in the cleanup() as it's not automatically done by this
API.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250131-redirect-multi-v4-7-970b33678512@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The network topology is held by the config[] table. This 'config' name
is a bit too generic if we want to add other configuration variables.
Rename config[] to net_config[].
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250131-redirect-multi-v4-6-970b33678512@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
configure_network() does two things : it first creates the network
topology and then configures the BPF maps to fit the test needs. This
isn't convenient if we want to re-use the same network topology for
different test cases.
Rename configure_network() create_network().
Move the BPF configuration to the test itself.
Split the test description in two parts, first the description of the
network topology, then the description of the test case.
Remove the veth indexes from the ASCII art as dynamic ones are used
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250131-redirect-multi-v4-5-970b33678512@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In the struct veth_configuration, the next_veth string is used to tell
the next virtual interface to which packets must be redirected to. So it
has to match the local_veth string of an other veth_configuration.
Change next_veth type to int to avoid handling two identical strings.
This integer is used as an offset in the network configuration table.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250131-redirect-multi-v4-4-970b33678512@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
check_ping() directly returns a SYS_NOFAIL without any previous
treatment. It's called only once in the file and hardcodes the used
namespace and ip address.
Replace check_ping() with a direct call of SYS_NOFAIL in the test.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250131-redirect-multi-v4-3-970b33678512@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some tests can't be run in parallel because they use same namespace
names or veth names.
Create an helper that appends the thread ID to a given string. 8
characters are used for it (7 digits + '\0')
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250131-redirect-multi-v4-1-970b33678512@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The runqslower binary from a cross-endian build currently fails to run
because the included skeleton has host endianness. Fix this by passing the
target BPF endianness to the runqslower sub-make.
Fixes: 5a63c33d6f ("selftests/bpf: Support cross-endian building")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250125071423.2603588-1-itugrok@yahoo.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are two bpf_link__destroy(freplace_link) calls in
test_tailcall_bpf2bpf_freplace(). After the first bpf_link__destroy()
is called, if the following bpf_map_{update,delete}_elem() throws an
exception, it will jump to the "out" label and call bpf_link__destroy()
again, causing double free and eventually leading to a segfault.
Fix it by directly resetting freplace_link to NULL after the first
bpf_link__destroy() call.
Fixes: 021611d33e ("selftests/bpf: Add test to verify tailcall and freplace restrictions")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/bpf/20250122022838.1079157-1-wutengda@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Most of the filesystem methods where we care about dentry name
and parent have their stability guaranteed by the callers;
->d_revalidate() is the major exception.
It's easy enough for callers to supply stable values for
expected name and expected parent of the dentry being
validated. That kills quite a bit of boilerplate in
->d_revalidate() instances, along with a bunch of races
where they used to access ->d_name without sufficient
precautions.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZ5gkoQAKCRBZ7Krx/gZQ
6w9FAP4nyxNNWMjE1TwuWR/DNDMYYuw/qn/miZ88B5BUM8hzqgD/W2SjRvcbSaIm
xSIYpbtKgtqNU34P1PU+dBvL8Utz2AE=
=TWY8
-----END PGP SIGNATURE-----
Merge tag 'pull-revalidate' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs d_revalidate updates from Al Viro:
"Provide stable parent and name to ->d_revalidate() instances
Most of the filesystem methods where we care about dentry name and
parent have their stability guaranteed by the callers;
->d_revalidate() is the major exception.
It's easy enough for callers to supply stable values for expected name
and expected parent of the dentry being validated. That kills quite a
bit of boilerplate in ->d_revalidate() instances, along with a bunch
of races where they used to access ->d_name without sufficient
precautions"
* tag 'pull-revalidate' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
9p: fix ->rename_sem exclusion
orangefs_d_revalidate(): use stable parent inode and name passed by caller
ocfs2_dentry_revalidate(): use stable parent inode and name passed by caller
nfs: fix ->d_revalidate() UAF on ->d_name accesses
nfs{,4}_lookup_validate(): use stable parent inode passed by caller
gfs2_drevalidate(): use stable parent inode and name passed by caller
fuse_dentry_revalidate(): use stable parent inode and name passed by caller
vfat_revalidate{,_ci}(): use stable parent inode passed by caller
exfat_d_revalidate(): use stable parent inode passed by caller
fscrypt_d_revalidate(): use stable parent inode passed by caller
ceph_d_revalidate(): propagate stable name down into request encoding
ceph_d_revalidate(): use stable parent inode passed by caller
afs_d_revalidate(): use stable name and parent inode passed by caller
Pass parent directory inode and expected name to ->d_revalidate()
generic_ci_d_compare(): use shortname_storage
ext4 fast_commit: make use of name_snapshot primitives
dissolve external_name.u into separate members
make take_dentry_name_snapshot() lockless
dcache: back inline names with a struct-wrapped array of unsigned long
make sure that DNAME_INLINE_LEN is a multiple of word size
Add test cases for bpf + strparser and separated them from
sockmap_basic, as strparser has more encapsulation and parsing
capabilities compared to standard sockmap.
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://patch.msgid.link/20250122100917.49845-6-mrpre@163.com
SOCK_NONBLOCK flag is only effective during socket creation, not during
recv. Use MSG_DONTWAIT instead.
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://patch.msgid.link/20250122100917.49845-5-mrpre@163.com
The function bpf_test_init() now returns an error if user_size
(.data_size_in) is less than ETH_HLEN, causing the tests to
fail. Adjust the data size to ensure it meets the requirement of
ETH_HLEN.
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250121150643.671650-2-syoshida@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----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=f2CA
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"A smaller than usual release cycle.
The main changes are:
- Prepare selftest to run with GCC-BPF backend (Ihor Solodrai)
In addition to LLVM-BPF runs the BPF CI now runs GCC-BPF in compile
only mode. Half of the tests are failing, since support for
btf_decl_tag is still WIP, but this is a great milestone.
- Convert various samples/bpf to selftests/bpf/test_progs format
(Alexis Lothoré and Bastien Curutchet)
- Teach verifier to recognize that array lookup with constant
in-range index will always succeed (Daniel Xu)
- Cleanup migrate disable scope in BPF maps (Hou Tao)
- Fix bpf_timer destroy path in PREEMPT_RT (Hou Tao)
- Always use bpf_mem_alloc in bpf_local_storage in PREEMPT_RT (Martin
KaFai Lau)
- Refactor verifier lock support (Kumar Kartikeya Dwivedi)
This is a prerequisite for upcoming resilient spin lock.
- Remove excessive 'may_goto +0' instructions in the verifier that
LLVM leaves when unrolls the loops (Yonghong Song)
- Remove unhelpful bpf_probe_write_user() warning message (Marco
Elver)
- Add fd_array_cnt attribute for prog_load command (Anton Protopopov)
This is a prerequisite for upcoming support for static_branch"
* tag 'bpf-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (125 commits)
selftests/bpf: Add some tests related to 'may_goto 0' insns
bpf: Remove 'may_goto 0' instruction in opt_remove_nops()
bpf: Allow 'may_goto 0' instruction in verifier
selftests/bpf: Add test case for the freeing of bpf_timer
bpf: Cancel the running bpf_timer through kworker for PREEMPT_RT
bpf: Free element after unlock in __htab_map_lookup_and_delete_elem()
bpf: Bail out early in __htab_map_lookup_and_delete_elem()
bpf: Free special fields after unlock in htab_lru_map_delete_node()
tools: Sync if_xdp.h uapi tooling header
libbpf: Work around kernel inconsistently stripping '.llvm.' suffix
bpf: selftests: verifier: Add nullness elision tests
bpf: verifier: Support eliding map lookup nullness
bpf: verifier: Refactor helper access type tracking
bpf: tcp: Mark bpf_load_hdr_opt() arg2 as read-write
bpf: verifier: Add missing newline on verbose() call
selftests/bpf: Add distilled BTF test about marking BTF_IS_EMBEDDED
libbpf: Fix incorrect traversal end type ID when marking BTF_IS_EMBEDDED
libbpf: Fix return zero when elf_begin failed
selftests/bpf: Fix btf leak on new btf alloc failure in btf_distill test
veristat: Load struct_ops programs only once
...
Add both asm-based and C-based tests which have 'may_goto 0' insns.
For the following code in C-based test,
int i, tmp[3];
for (i = 0; i < 3 && can_loop; i++)
tmp[i] = 0;
The clang compiler (clang 19 and 20) generates
may_goto 2
may_goto 1
may_goto 0
r1 = 0
r2 = 0
r3 = 0
The above asm codes are due to llvm pass SROAPass. This ensures the
successful verification since tmp[0-2] are initialized. Otherwise,
the code without SROAPass like
may_goto 5
r1 = 0
may_goto 3
r2 = 0
may_goto 1
r3 = 0
will have verification failure.
Although from the source code C-based test should have verification
failure, clang compiler optimization generates code with successful
verification. If gcc generates different asm codes than clang, the
following code can be used for gcc:
int i, tmp[3];
for (i = 0; i < 3; i++)
tmp[i] = 0;
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250118192034.2124952-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The main purpose of the test is to demonstrate the lock problem for the
free of bpf_timer under PREEMPT_RT. When freeing a bpf_timer which is
running on other CPU in bpf_timer_cancel_and_free(), hrtimer_cancel()
will try to acquire a spin-lock (namely softirq_expiry_lock), however
the freeing procedure has already held a raw-spin-lock.
The test first creates two threads: one to start timers and the other to
free timers. The start-timers thread will start the timer and then wake
up the free-timers thread to free these timers when the starts complete.
After freeing, the free-timer thread will wake up the start-timer thread
to complete the current iteration. A loop of 10 iterations is used.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20250117101816.2101857-6-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
... so that they can be copied with struct assignment (which generates
better code) and accessed word-by-word.
The type is union shortname_storage; it's a union of arrays of
unsigned char and unsigned long.
struct name_snapshot.inline_name turned into union shortname_storage;
users (all in fs/dcache.c) adjusted.
struct dentry.d_iname has some users outside of fs/dcache.c; to
reduce the amount of noise in commit, it is replaced with
union shortname_storage d_shortname and d_iname is turned into a macro
that expands to d_shortname.string (similar to d_lock handling).
That compat macro is temporary - most of the remaining instances will
be taken out by debugfs series, and once that is merged and few others
are taken care of this will go away.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Test that nullness elision works for common use cases. For example, we
want to check that both constant scalar spills and STACK_ZERO functions.
As well as when there's both const and non-const values of R2 leading up
to a lookup. And obviously some bound checks.
Particularly tricky are spills both smaller or larger than key size. For
smaller, we need to ensure verifier doesn't let through a potential read
into unchecked bytes. For larger, endianness comes into play, as the
native endian value tracked in the verifier may not be the bytes the
kernel would have read out of the key pointer. So check that we disallow
both.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/f1dacaa777d4516a5476162e0ea549f7c3354d73.1736886479.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit allows progs to elide a null check on statically known map
lookup keys. In other words, if the verifier can statically prove that
the lookup will be in-bounds, allow the prog to drop the null check.
This is useful for two reasons:
1. Large numbers of nullness checks (especially when they cannot fail)
unnecessarily pushes prog towards BPF_COMPLEXITY_LIMIT_JMP_SEQ.
2. It forms a tighter contract between programmer and verifier.
For (1), bpftrace is starting to make heavier use of percpu scratch
maps. As a result, for user scripts with large number of unrolled loops,
we are starting to hit jump complexity verification errors. These
percpu lookups cannot fail anyways, as we only use static key values.
Eliding nullness probably results in less work for verifier as well.
For (2), percpu scratch maps are often used as a larger stack, as the
currrent stack is limited to 512 bytes. In these situations, it is
desirable for the programmer to express: "this lookup should never fail,
and if it does, it means I messed up the code". By omitting the null
check, the programmer can "ask" the verifier to double check the logic.
Tests also have to be updated in sync with these changes, as the
verifier is more efficient with this change. Notable, iters.c tests had
to be changed to use a map type that still requires null checks, as it's
exercising verifier tracking logic w.r.t iterators.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/68f3ea96ff3809a87e502a11a4bd30177fc5823e.1736886479.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Previously, the verifier was treating all PTR_TO_STACK registers passed
to a helper call as potentially written to by the helper. However, all
calls to check_stack_range_initialized() already have precise access type
information available.
Rather than treat ACCESS_HELPER as a proxy for BPF_WRITE, pass
enum bpf_access_type to check_stack_range_initialized() to more
precisely track helper arguments.
One benefit from this precision is that registers tracked as valid
spills and passed as a read-only helper argument remain tracked after
the call. Rather than being marked STACK_MISC afterwards.
An additional benefit is the verifier logs are also more precise. For
this particular error, users will enjoy a slightly clearer message. See
included selftest updates for examples.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/ff885c0e5859e0cd12077c3148ff0754cad4f7ed.1736886479.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When redirecting the split BTF to the vmlinux base BTF, we need to mark
the distilled base struct/union members of split BTF structs/unions in
id_map with BTF_IS_EMBEDDED. This indicates that these types must match
both name and size later. So if a needed composite type, which is the
member of composite type in the split BTF, has a different size in the
base BTF we wish to relocate with, btf__relocate() should error out.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250115100241.4171581-4-pulehui@huaweicloud.com
libbpf automatically adjusts autoload for struct_ops programs,
see libbpf.c:bpf_object_adjust_struct_ops_autoload.
For example, if there is a map:
SEC(".struct_ops.link")
struct sched_ext_ops ops = {
.enqueue = foo,
.tick = bar,
};
Both 'foo' and 'bar' would be loaded if 'ops' autocreate is true,
both 'foo' and 'bar' would be skipped if 'ops' autocreate is false.
This means that when veristat processes object file with 'ops',
it would load 4 programs in total: two programs per each
'process_prog' call.
The adjustment occurs at object load time, and libbpf remembers
association between 'ops' and 'foo'/'bar' at object open time.
The only way to persuade libbpf to load one of two is to adjust map
initial value, such that only one program is referenced.
This patch does exactly that, significantly reducing time to process
object files with big number of struct_ops programs.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250115223835.919989-1-eddyz87@gmail.com
Include <limits.h> in 'veristat.c' to provide a UINT_MAX definition and
avoid multiple compile errors against mips64el/musl-libc:
veristat.c: In function 'max_verifier_log_size':
veristat.c:1135:36: error: 'UINT_MAX' undeclared (first use in this function)
1135 | const int SMALL_LOG_SIZE = UINT_MAX >> 8;
| ^~~~~~~~
veristat.c:24:1: note: 'UINT_MAX' is defined in header '<limits.h>'; did you forget to '#include <limits.h>'?
23 | #include <math.h>
+++ |+#include <limits.h>
24 |
Fixes: 1f7c336307 ("selftests/bpf: Increase verifier log limit in veristat")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250116075036.3459898-1-tony.ambardar@gmail.com
prog_tests/xdp_do_redirect.c is the only user of the BPF programs
located in progs/test_xdp_do_redirect.c and progs/test_xdp_redirect.c.
There is no need to keep both files with such close names.
Move test_xdp_redirect.c contents to test_xdp_do_redirect.c and remove
progs/test_xdp_redirect.c
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250110-xdp_redirect-v2-3-b8f3ae53e894@bootlin.com
test_xdp_redirect.sh can't be used by the BPF CI.
Migrate test_xdp_redirect.sh into a new test case in xdp_do_redirect.c.
It uses the same network topology and the same BPF programs located in
progs/test_xdp_redirect.c and progs/xdp_dummy.c.
Remove test_xdp_redirect.sh and its Makefile entry.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250110-xdp_redirect-v2-2-b8f3ae53e894@bootlin.com
SEC("redirect_to_111") and SEC("redirect_to_222") can't be loaded by the
__load() helper.
Rename both sections SEC("xdp") so it can be interpreted by the __load()
helper in upcoming patch.
Update the test_xdp_redirect.sh to use the program name instead of the
section name to load the BPF program.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://patch.msgid.link/20250110-xdp_redirect-v2-1-b8f3ae53e894@bootlin.com
`-vl2` is a useful combination of flags to dump the entire
verification log. This is helpful when making changes to the verifier,
as you can see what it thinks program one instruction at a time.
This was more or less a hidden feature before. Document it so others can
discover it.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/d57bbcca81e06ae8dcdadaedb99a48dced67e422.1736466129.git.dxu@dxuuu.xyz
Adding kprobe.session probe to bpf_kfunc_common_test that misses bpf
program execution due to recursion check and making sure it increases
the program missed count properly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250106175048.1443905-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIsEABYKADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZ30g5RUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISIMfSwD5AceGwL4lOliAKuD+jt5FGBbR4Wag
HBn/16BGwMwfxMEBAP1UoXeo4gs6AawT+JcvZjwfNlXwdAiyAx9zY4MtvxoL
=TcTF
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2025-01-07
We've added 7 non-merge commits during the last 32 day(s) which contain
a total of 11 files changed, 190 insertions(+), 103 deletions(-).
The main changes are:
1) Migrate the test_xdp_meta.sh BPF selftest into test_progs
framework, from Bastien Curutchet.
2) Add ability to configure head/tailroom for netkit devices,
from Daniel Borkmann.
3) Fixes and improvements to the xdp_hw_metadata selftest,
from Song Yoong Siang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Extend netkit tests to validate set {head,tail}room
netkit: Add add netkit {head,tail}room to rt_link.yaml
netkit: Allow for configuring needed_{head,tail}room
selftests/bpf: Migrate test_xdp_meta.sh into xdp_context_test_run.c
selftests/bpf: test_xdp_meta: Rename BPF sections
selftests/bpf: Enable Tx hwtstamp in xdp_hw_metadata
selftests/bpf: Actuate tx_metadata_len in xdp_hw_metadata
====================
Link: https://patch.msgid.link/20250107130908.143644-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest to ensure BPF for loops within critical sections are
accepted by the verifier.
Signed-off-by: Emil Tsalapatis (Meta) <emil@etsalapatis.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250104202528.882482-3-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, when we run the BPF selftests with the following command:
make -C tools/testing/selftests TARGETS=bpf SKIP_TARGETS=""
The command generates untracked files and directories with make version
less than 4.4:
'''
Untracked files:
(use "git add <file>..." to include in what will be committed)
tools/testing/selftests/bpfFEATURE-DUMP.selftests
tools/testing/selftests/bpffeature/
'''
We lost slash after word "bpf". The reason is slash appending code is as
follow:
'''
OUTPUT := $(OUTPUT)/
$(eval include ../../../build/Makefile.feature)
OUTPUT := $(patsubst %/,%,$(OUTPUT))
'''
This way of assigning values to OUTPUT will never be effective for the
variable OUTPUT provided via the command argument [1] and BPF makefile
is called from parent Makfile(tools/testing/selftests/Makefile) like:
'''
all:
...
$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET
'''
According to GNU make, we can use override Directive to fix this issue [2].
[1] https://www.gnu.org/software/make/manual/make.html#Overriding
[2] https://www.gnu.org/software/make/manual/make.html#Override-Directive
Fixes: dc3a8804d7 ("selftests/bpf: Adapt OUTPUT appending logic to lower versions of Make")
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20241224075957.288018-1-mrpre@163.com
Commit 82c1f13de3 ("selftests/bpf: Add more stats into veristat")
introduced new stats, added by default in the CSV output, that were not
added to parse_stat_value, used in parse_stats_csv which is used in
comparison mode. Thus it broke comparison mode altogether making it fail
with "Unrecognized stat #7" and EINVAL.
One quirk is that PROG_TYPE and ATTACH_TYPE have been transformed to
strings using libbpf_bpf_prog_type_str and libbpf_bpf_attach_type_str
respectively. Since we might not want to compare those string values, we
just skip the parsing in this patch. We might want to translate it back
to the enum value or compare the string value directly.
Fixes: 82c1f13de3 ("selftests/bpf: Add more stats into veristat")
Signed-off-by: Mahe Tardy <mahe.tardy@gmail.com>
Tested-by: Mykyta Yatsenko<yatsenko@meta.com>
Link: https://lore.kernel.org/r/20241220152218.28405-1-mahe.tardy@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Similarly to the previous test, we also need a test case to cover
positive offsets as well, TC is an excellent hook for this.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Zijian Zhang <zijianzhang@bytedance.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241213034057.246437-5-xiyou.wangcong@gmail.com
Pull socket helpers out of sockmap_helpers.h so that they can be reused
for TC tests as well. This prepares for the next patch.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241213034057.246437-4-xiyou.wangcong@gmail.com
As requested by Daniel, we need to add a selftest to cover
bpf_skb_change_tail() cases in skb_verdict. Here we test trimming,
growing and error cases, and validate its expected return values and the
expected sizes of the payload.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241213034057.246437-3-xiyou.wangcong@gmail.com
In get_uprobe_offset(), the call to procmap_query() use the constant
PROCMAP_QUERY_VMA_EXECUTABLE, even if PROCMAP_QUERY is not defined.
Define PROCMAP_QUERY_VMA_EXECUTABLE when PROCMAP_QUERY isn't.
Fixes: 4e9e07603e ("selftests/bpf: make use of PROCMAP_QUERY ioctl if available")
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20241218175724.578884-1-jmarchan@redhat.com
Fix comparator implementation to return most popular source code
lines instead of least.
Introduce min/max macro for building veristat outside of Linux
repository.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241217181113.364651-1-mykyta.yatsenko5@gmail.com
test_xdp_meta.sh can't be used by the BPF CI.
Migrate test_xdp_meta.sh in a new test case in xdp_context_test_run.c.
It uses the same BPF programs located in progs/test_xdp_meta.c and the
same network topology.
Remove test_xdp_meta.sh and its Makefile entry.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20241213-xdp_meta-v2-2-634582725b90@bootlin.com
SEC("t") and SEC("x") can't be loaded by the __load() helper.
Rename these sections SEC("tc") and SEC("xdp") so they can be
interpreted by the __load() helper in upcoming patch.
Update the test_xdp_meta.sh to fit these new names.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20241213-xdp_meta-v2-1-634582725b90@bootlin.com
Add tests to ensure that arguments are correctly marked based on their
specified positions, and whether they get marked correctly as maybe
null. For modules, all tracepoint parameters should be marked
PTR_MAYBE_NULL by default.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241213221929.3495062-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Arguments to a raw tracepoint are tagged as trusted, which carries the
semantics that the pointer will be non-NULL. However, in certain cases,
a raw tracepoint argument may end up being NULL. More context about this
issue is available in [0].
Thus, there is a discrepancy between the reality, that raw_tp arguments can
actually be NULL, and the verifier's knowledge, that they are never NULL,
causing explicit NULL check branch to be dead code eliminated.
A previous attempt [1], i.e. the second fixed commit, was made to
simulate symbolic execution as if in most accesses, the argument is a
non-NULL raw_tp, except for conditional jumps. This tried to suppress
branch prediction while preserving compatibility, but surfaced issues
with production programs that were difficult to solve without increasing
verifier complexity. A more complete discussion of issues and fixes is
available at [2].
Fix this by maintaining an explicit list of tracepoints where the
arguments are known to be NULL, and mark the positional arguments as
PTR_MAYBE_NULL. Additionally, capture the tracepoints where arguments
are known to be ERR_PTR, and mark these arguments as scalar values to
prevent potential dereference.
Each hex digit is used to encode NULL-ness (0x1) or ERR_PTR-ness (0x2),
shifted by the zero-indexed argument number x 4. This can be represented
as follows:
1st arg: 0x1
2nd arg: 0x10
3rd arg: 0x100
... and so on (likewise for ERR_PTR case).
In the future, an automated pass will be used to produce such a list, or
insert __nullable annotations automatically for tracepoints. Each
compilation unit will be analyzed and results will be collated to find
whether a tracepoint pointer is definitely not null, maybe null, or an
unknown state where verifier conservatively marks it PTR_MAYBE_NULL.
A proof of concept of this tool from Eduard is available at [3].
Note that in case we don't find a specification in the raw_tp_null_args
array and the tracepoint belongs to a kernel module, we will
conservatively mark the arguments as PTR_MAYBE_NULL. This is because
unlike for in-tree modules, out-of-tree module tracepoints may pass NULL
freely to the tracepoint. We don't protect against such tracepoints
passing ERR_PTR (which is uncommon anyway), lest we mark all such
arguments as SCALAR_VALUE.
While we are it, let's adjust the test raw_tp_null to not perform
dereference of the skb->mark, as that won't be allowed anymore, and make
it more robust by using inline assembly to test the dead code
elimination behavior, which should still stay the same.
[0]: https://lore.kernel.org/bpf/ZrCZS6nisraEqehw@jlelli-thinkpadt14gen4.remote.csb
[1]: https://lore.kernel.org/all/20241104171959.2938862-1-memxor@gmail.com
[2]: https://lore.kernel.org/bpf/20241206161053.809580-1-memxor@gmail.com
[3]: https://github.com/eddyz87/llvm-project/tree/nullness-for-tracepoint-params
Reported-by: Juri Lelli <juri.lelli@redhat.com> # original bug
Reported-by: Manu Bretelle <chantra@meta.com> # bugs in masking fix
Fixes: 3f00c52393 ("bpf: Allow trusted pointers to be passed to KF_TRUSTED_ARGS kfuncs")
Fixes: cb4158ce8e ("bpf: Mark raw_tp arguments with PTR_MAYBE_NULL")
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Co-developed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241213221929.3495062-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch reverts commit
cb4158ce8e ("bpf: Mark raw_tp arguments with PTR_MAYBE_NULL"). The
patch was well-intended and meant to be as a stop-gap fixing branch
prediction when the pointer may actually be NULL at runtime. Eventually,
it was supposed to be replaced by an automated script or compiler pass
detecting possibly NULL arguments and marking them accordingly.
However, it caused two main issues observed for production programs and
failed to preserve backwards compatibility. First, programs relied on
the verifier not exploring == NULL branch when pointer is not NULL, thus
they started failing with a 'dereference of scalar' error. Next,
allowing raw_tp arguments to be modified surfaced the warning in the
verifier that warns against reg->off when PTR_MAYBE_NULL is set.
More information, context, and discusson on both problems is available
in [0]. Overall, this approach had several shortcomings, and the fixes
would further complicate the verifier's logic, and the entire masking
scheme would have to be removed eventually anyway.
Hence, revert the patch in preparation of a better fix avoiding these
issues to replace this commit.
[0]: https://lore.kernel.org/bpf/20241206161053.809580-1-memxor@gmail.com
Reported-by: Manu Bretelle <chantra@meta.com>
Fixes: cb4158ce8e ("bpf: Mark raw_tp arguments with PTR_MAYBE_NULL")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241213221929.3495062-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace magic constants in a BTF structure initialization code by
proper macros, as is done in other similar selftests.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241213130934.1087929-8-aspsk@isovalent.com
Add a new set of tests to test the new field in PROG_LOAD-related
part of bpf_attr: fd_array_cnt.
Add the following test cases:
* fd_array_cnt/no-fd-array: program is loaded in a normal
way, without any fd_array present
* fd_array_cnt/fd-array-ok: pass two extra non-used maps,
check that they're bound to the program
* fd_array_cnt/fd-array-dup-input: pass a few extra maps,
only two of which are unique
* fd_array_cnt/fd-array-ref-maps-in-array: pass a map in
fd_array which is also referenced from within the program
* fd_array_cnt/fd-array-trash-input: pass array with some trash
* fd_array_cnt/fd-array-2big: pass too large array
All the tests above are using the bpf(2) syscall directly,
no libbpf involved.
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241213130934.1087929-7-aspsk@isovalent.com
BPF_TARGET_ENDIAN is used in CLANG_BPF_BUILD_RULE and co macros.
It is defined as a recursively expanded variable, meaning that it is
recomputed each time the value is needed. Thus, it is recomputed for
each *.bpf.o file compilation. The variable is computed by running a C
compiler in a shell. This significantly hinders parallel build
performance for *.bpf.o files.
This commit changes BPF_TARGET_ENDIAN to be a simply expanded
variable.
# Build performance stats before this commit
$ git clean -xfd; time make -j12
real 1m0.000s
...
# Build performance stats after this commit
$ git clean -xfd; time make -j12
real 0m43.605s
...
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241213003224.837030-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ensure that performing narrow ctx loads other than size == 8 are
rejected when the argument is a pointer type.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241212092050.3204165-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Robert Morris reported the following program type which passes the
verifier in [0]:
SEC("struct_ops/bpf_cubic_init")
void BPF_PROG(bpf_cubic_init, struct sock *sk)
{
asm volatile("r2 = *(u16*)(r1 + 0)"); // verifier should demand u64
asm volatile("*(u32 *)(r2 +1504) = 0"); // 1280 in some configs
}
The second line may or may not work, but the first instruction shouldn't
pass, as it's a narrow load into the context structure of the struct ops
callback. The code falls back to btf_ctx_access to ensure correctness
and obtaining the types of pointers. Ensure that the size of the access
is correctly checked to be 8 bytes, otherwise the verifier thinks the
narrow load obtained a trusted BTF pointer and will permit loads/stores
as it sees fit.
Perform the check on size after we've verified that the load is for a
pointer field, as for scalar values narrow loads are fine. Access to
structs passed as arguments to a BPF program are also treated as
scalars, therefore no adjustment is needed in their case.
Existing verifier selftests are broken by this change, but because they
were incorrect. Verifier tests for d_path were performing narrow load
into context to obtain path pointer, had this program actually run it
would cause a crash. The same holds for verifier_btf_ctx_access tests.
[0]: https://lore.kernel.org/bpf/51338.1732985814@localhost
Fixes: 9e15db6613 ("bpf: Implement accurate raw_tp context access via BTF")
Reported-by: Robert Morris <rtm@mit.edu>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241212092050.3204165-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extend changes_pkt_data tests with test cases freplacing the main
program that does not have subprograms. Try four combinations when
both main program and replacement do and do not change packet data.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241212070711.427443-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test case with a tail call done from a global sub-program. Such
tails calls should be considered as invalidating packet pointers.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-9-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tail-called programs could execute any of the helpers that invalidate
packet pointers. Hence, conservatively assume that each tail call
invalidates packet pointers.
Making the change in bpf_helper_changes_pkt_data() automatically makes
use of check_cfg() logic that computes 'changes_pkt_data' effect for
global sub-programs, such that the following program could be
rejected:
int tail_call(struct __sk_buff *sk)
{
bpf_tail_call_static(sk, &jmp_table, 0);
return 0;
}
SEC("tc")
int not_safe(struct __sk_buff *sk)
{
int *p = (void *)(long)sk->data;
... make p valid ...
tail_call(sk);
*p = 42; /* this is unsafe */
...
}
The tc_bpf2bpf.c:subprog_tc() needs change: mark it as a function that
can invalidate packet pointers. Otherwise, it can't be freplaced with
tailcall_freplace.c:entry_freplace() that does a tail call.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-8-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Try different combinations of global functions replacement:
- replace function that changes packet data with one that doesn't;
- replace function that changes packet data with one that does;
- replace function that doesn't change packet data with one that does;
- replace function that doesn't change packet data with one that doesn't;
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241210041100.1898468-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Verify that the sockmap link was not severed, and socket's entry is indeed
removed from the map when the corresponding descriptor gets closed.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241202-sockmap-replace-v1-2-1e88579e7bd5@rbox.co
With CONFIG_KPROBES_ON_FTRACE enabled on powerpc, ftrace_location_range
returns ftrace location for bpf_fentry_test1 at offset of 4 bytes from
function entry. This is because branch to _mcount function is at offset
of 4 bytes in function profile sequence.
To fix this, add entry_offset of 4 bytes while verifying the address for
kprobe entry address of bpf_fentry_test1 in verify_perf_link_info in
selftest, when CONFIG_KPROBES_ON_FTRACE is enabled.
Disassemble of bpf_fentry_test1:
c000000000e4b080 <bpf_fentry_test1>:
c000000000e4b080: a6 02 08 7c mflr r0
c000000000e4b084: b9 e2 22 4b bl c00000000007933c <_mcount>
c000000000e4b088: 01 00 63 38 addi r3,r3,1
c000000000e4b08c: b4 07 63 7c extsw r3,r3
c000000000e4b090: 20 00 80 4e blr
When CONFIG_PPC_FTRACE_OUT_OF_LINE [1] is enabled, these function profile
sequence is moved out of line with an unconditional branch at offset 0.
So, the test works without altering the offset for
'CONFIG_KPROBES_ON_FTRACE && CONFIG_PPC_FTRACE_OUT_OF_LINE' case.
Disassemble of bpf_fentry_test1:
c000000000f95190 <bpf_fentry_test1>:
c000000000f95190: 00 00 00 60 nop
c000000000f95194: 01 00 63 38 addi r3,r3,1
c000000000f95198: b4 07 63 7c extsw r3,r3
c000000000f9519c: 20 00 80 4e blr
[1] https://lore.kernel.org/all/20241030070850.1361304-13-hbathini@linux.ibm.com/
Fixes: 23cf7aa539 ("selftests/bpf: Add selftest for fill_link_info")
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241209065720.234344-1-skb99@linux.ibm.com
Extend veristat to collect and print more stats, namely:
- program size in instructions
- jited program size in bytes
- program type
- attach type
- stack depth
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241209130455.94592-1-mykyta.yatsenko5@gmail.com
The selftests build four kernel modules which use copy-pasted Makefile
targets. This is a bit messy, and doesn't scale so well when we add more
modules, so let's consolidate these rules into a single rule generated
for each module name, and move the module sources into a single
directory.
To avoid parallel builds of the different modules stepping on each
other's toes during the 'modpost' phase of the Kbuild 'make modules',
the module files should really be a grouped target. However, make only
added explicit support for grouped targets in version 4.3, which is
newer than the minimum version supported by the kernel. However, make
implicitly treats pattern matching rules with multiple targets as a
grouped target, so we can work around this by turning the rule into a
pattern matching target. We do this by replacing '.ko' with '%ko' in the
targets with subst().
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Viktor Malik <vmalik@redhat.com>
Link: https://lore.kernel.org/bpf/20241204-bpf-selftests-mod-compile-v5-1-b96231134a49@redhat.com
Add more test cases for LPM trie in test_maps:
1) test_lpm_trie_update_flags
It constructs various use cases for BPF_EXIST and BPF_NOEXIST and check
whether the return value of update operation is expected.
2) test_lpm_trie_update_full_maps
It tests the update operations on a full LPM trie map. Adding new node
will fail and overwriting the value of existed node will succeed.
3) test_lpm_trie_iterate_strs and test_lpm_trie_iterate_ints
There two test cases test whether the iteration through get_next_key is
sorted and expected. These two test cases delete the minimal key after
each iteration and check whether next iteration returns the second
minimal key. The only difference between these two test cases is the
former one saves strings in the LPM trie and the latter saves integers.
Without the fix of get_next_key, these two cases will fail as shown
below:
test_lpm_trie_iterate_strs(1091):FAIL:iterate #2 got abc exp abS
test_lpm_trie_iterate_ints(1142):FAIL:iterate #1 got 0x2 exp 0x1
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-10-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move test_lpm_map.c to map_tests/ to include LPM trie test cases in
regular test_maps run. Most code remains unchanged, including the use of
assert(). Only reduce n_lookups from 64K to 512, which decreases
test_lpm_map runtime from 37s to 0.7s.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241206110622.1161752-9-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, user needs to manually enable transmit hardware timestamp
feature of certain Ethernet drivers, e.g. stmmac and igc drivers, through
following command after running the xdp_hw_metadata app.
sudo hwstamp_ctl -i eth0 -t 1
To simplify the step test of xdp_hw_metadata, set tx_type to HWTSTAMP_TX_ON
to enable hardware timestamping for all outgoing packets, so that user no
longer need to execute hwstamp_ctl command.
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241205051936.3156307-1-yoong.siang.song@intel.com
set XDP_UMEM_TX_METADATA_LEN flag to reserve tx_metadata_len bytes of
per-chunk metadata.
Fixes: d5e726d914 ("xsk: Require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len")
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241205044258.3155799-1-yoong.siang.song@intel.com
Add a test case to verify that without CAP_PERFMON, the test now
succeeds instead of failing due to a verification error.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241204044757.1483141-6-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ensure that when CAP_PERFMON is dropped, and the verifier sees
allow_ptr_leaks as false, we are not permitted to read from a
STACK_INVALID slot. Without the fix, the test will report unexpected
success in loading.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241204044757.1483141-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a __caps_unpriv annotation so that tests requiring specific
capabilities while dropping the rest can conveniently specify them
during selftest declaration instead of munging with capabilities at
runtime from the testing binary.
While at it, let us convert test_verifier_mtu to use this new support
instead.
Since we do not want to include linux/capability.h, we only defined the
four main capabilities BPF subsystem deals with in bpf_misc.h for use in
tests. If the user passes a CAP_SYS_NICE or anything else that's not
defined in the header, capability parsing code will return a warning.
Also reject strtol returning 0. CAP_CHOWN = 0 but we'll never need to
use it, and strtol doesn't errno on failed conversion. Fail the test in
such a case.
The original diff for this idea is available at link [0].
[0]: https://lore.kernel.org/bpf/a1e48f5d9ae133e19adc6adf27e19d585e06bab4.camel@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
[ Kartikeya: rebase on bpf-next, add warn to parse_caps, convert test_verifier_mtu ]
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241204044757.1483141-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit f803bcf920 ("selftests/bpf: Prevent client connect before
server bind in test_tc_tunnel.sh") added code that waits for the
netcat server to start before the netcat client attempts to connect to
it. However, not all calls to 'server_listen' were guarded.
This patch adds the existing 'wait_for_port' guard after the remaining
call to 'server_listen'.
Fixes: f803bcf920 ("selftests/bpf: Prevent client connect before server bind in test_tc_tunnel.sh")
Signed-off-by: Marco Leogrande <leogrande@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241202204530.1143448-1-leogrande@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Include tests that check for rejection in erroneous cases, like
unbalanced IRQ-disabled counts, within and across subprogs, invalid IRQ
flag state or input to kfuncs, behavior upon overwriting IRQ saved state
on stack, interaction with sleepable kfuncs/helpers, global functions,
and out of order restore. Include some success scenarios as well to
demonstrate usage.
#128/1 irq/irq_save_bad_arg:OK
#128/2 irq/irq_restore_bad_arg:OK
#128/3 irq/irq_restore_missing_2:OK
#128/4 irq/irq_restore_missing_3:OK
#128/5 irq/irq_restore_missing_3_minus_2:OK
#128/6 irq/irq_restore_missing_1_subprog:OK
#128/7 irq/irq_restore_missing_2_subprog:OK
#128/8 irq/irq_restore_missing_3_subprog:OK
#128/9 irq/irq_restore_missing_3_minus_2_subprog:OK
#128/10 irq/irq_balance:OK
#128/11 irq/irq_balance_n:OK
#128/12 irq/irq_balance_subprog:OK
#128/13 irq/irq_global_subprog:OK
#128/14 irq/irq_restore_ooo:OK
#128/15 irq/irq_restore_ooo_3:OK
#128/16 irq/irq_restore_3_subprog:OK
#128/17 irq/irq_restore_4_subprog:OK
#128/18 irq/irq_restore_ooo_3_subprog:OK
#128/19 irq/irq_restore_invalid:OK
#128/20 irq/irq_save_invalid:OK
#128/21 irq/irq_restore_iter:OK
#128/22 irq/irq_save_iter:OK
#128/23 irq/irq_flag_overwrite:OK
#128/24 irq/irq_flag_overwrite_partial:OK
#128/25 irq/irq_ooo_refs_array:OK
#128/26 irq/irq_sleepable_helper:OK
#128/27 irq/irq_sleepable_kfunc:OK
#128 irq:OK
Summary: 1/27 PASSED, 0 SKIPPED, 0 FAILED
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241204030400.208005-8-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For preemption-related kfuncs, we don't test their interaction with
sleepable kfuncs (we do test helpers) even though the verifier has
code to protect against such a pattern. Expand coverage of the selftest
to include this case.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241204030400.208005-7-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The verifier log when leaking resources on BPF_EXIT may be a bit
confusing, as it's a problem only when finally existing from the main
prog, not from any of the subprogs. Hence, update the verifier error
string and the corresponding selftests matching on it.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241204030400.208005-6-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii spotted that process_dynptr_func's rejection of incorrect
argument register type will print an error string where argument numbers
are not zero-indexed, unlike elsewhere in the verifier. Fix this by
subtracting 1 from regno. The same scenario exists for iterator
messages. Fix selftest error strings that match on the exact argument
number while we're at it to ensure clean bisection.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241203002235.3776418-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add selftests to cover argument type check for iterator kfuncs, and
cover all three kinds (new, next, destroy). Without the fix in the
previous patch, the selftest would not cause a verifier error.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241203000238.3602922-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, KF_ARG_PTR_TO_ITER handling missed checking the reg->type and
ensuring it is PTR_TO_STACK. Instead of enforcing this in the caller of
process_iter_arg, move the check into it instead so that all callers
will gain the check by default. This is similar to process_dynptr_func.
An existing selftest in verifier_bits_iter.c fails due to this change,
but it's because it was passing a NULL pointer into iter_next helper and
getting an error further down the checks, but probably meant to pass an
uninitialized iterator on the stack (as is done in the subsequent test
below it). We will gain coverage for non-PTR_TO_STACK arguments in later
patches hence just change the declaration to zero-ed stack object.
Fixes: 06accc8779 ("bpf: add support for open-coded iterator loops")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Tao Lyu <tao.lyu@epfl.ch>
[ Kartikeya: move check into process_iter_arg, rewrite commit log ]
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241203000238.3602922-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
serial_test_flow_dissector_namespace manipulates both the root net
namespace and a dedicated non-root net namespace. If for some reason a
program attach on root namespace succeeds while it was expected to
fail, the unexpected program will remain attached to the root namespace,
possibly affecting other runs or even other tests in the same run.
Fix undesired test failure side effect by explicitly detaching programs
on failing tests expecting attach to fail. As a side effect of this
change, do not test errno value if the tested operation do not fail.
Fixes: 284ed00a59dd ("selftests/bpf: migrate flow_dissector namespace exclusivity test")
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241128-small_flow_test_fix-v1-1-c12d45c98c59@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This verifies that programs of BPF_PROG_TYPE_CGROUP_SKB can access
skb->data_end with direct packet access when being run with
BPF_PROG_TEST_RUN.
Signed-off-by: Mahe Tardy <mahe.tardy@gmail.com>
Link: https://lore.kernel.org/r/20241125152603.375898-2-mahe.tardy@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that test_flow_dissector.sh has been converted to test_progs, remove
the legacy test.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-14-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_flow_dissector.sh loads flow_dissector program and subprograms,
creates and configured relevant tunnels and interfaces, and ensure that
the bpf dissection is actually performed correctly. Similar tests exist
in test_progs (thanks to flow_dissector.c) and run the same programs,
but those are only executed with BPF_PROG_RUN: those tests are then
missing some coverage (eg: coverage for flow keys manipulated when the
configured flower uses a port range, which has a dedicated test in
test_flow_dissector.sh)
Convert test_flow_dissector.sh into test_progs so that the corresponding
tests are also run in CI.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-13-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
network_helpers.c provides some helpers to generate ip checksums or ip
pseudo-header checksums, but not for upper layers (eg: udp checksums)
Add helpers for udp checksum to allow manually building udp packets.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-12-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Trying to add udp-dedicated helpers in network_helpers involves
including some udp header, which makes multiple test_progs tests build
fail:
In file included from ./progs/test_cls_redirect.h:13,
from [...]/prog_tests/cls_redirect.c:15:
[...]/usr/include/linux/udp.h:23:8: error: redefinition of ‘struct udphdr’
23 | struct udphdr {
| ^~~~~~
In file included from ./network_helpers.h:17,
from [...]/prog_tests/cls_redirect.c:13:
[...]/usr/include/netinet/udp.h:55:8: note: originally defined here
55 | struct udphdr
| ^~~~~~
This error is due to struct udphdr being defined in both <linux/udp.h>
and <netinet/udp.h>.
Use only <netinet/udp.h> in every test. While at it, perform the same
for tcp.h. For some tests, the change needs to be done in the eBPF
program part as well, because of some headers sharing between both
sides.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-11-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
network_helpers.h provides helpers to compute checksum for pseudo
headers but no helpers to compute the global checksums.
Before adding those, clarify csum_tcpudp_magic and csum_ipv6_magic
purpose by adding some documentation.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-10-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
xdp_metadata test has a small helper computing ipv4 checksums to allow
manually building packets.
Move this helper to network_helpers to share it with other tests.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-9-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Enable CONFIG_NET_ACT_GACT to allow adding simple actions with tc
filters. This is for example needed to migrate test_flow_dissector into
the automated testing performed in CI.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-8-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit a11c397c43 ("bpf/flow_dissector: add mode to enforce global BPF
flow dissector") is currently tested in test_flow_dissector.sh, which is
not part of test_progs. Add the corresponding test to flow_dissector.c,
which is part of test_progs. The new test reproduces the behavior
implemented in its shell script counterpart:
- attach a flow dissector program to the root net namespace, ensure
that we can not attach another flow dissector in any non-root net
namespace
- attach a flow dissector program to a non-root net namespace, ensure
that we can not attach another flow dissector in root namespace
Since the new test is performing operations in the root net namespace,
make sure to set it as a "serial" test to make sure not to conflict with
any other test.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-7-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bpf_flow program is able to handle GRE headers in IP packets. Add a
few test data input simulating those GRE packets, with 2 different
cases:
- parse GRE and the encapsulated packet
- parse GRE only
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-6-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The flow_dissector test integrated in test_progs actually runs a wide
matrix of tests over different packets types and bpf programs modes, but
exposes only 3 main tests, preventing tests users from running specific
subtests with a specific input only.
Expose all subtests executed by flow_dissector by using
test__start_subtest().
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-5-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The flow_dissector runs plenty of tests over diffent kind of packets,
grouped into three categories: skb mode, non-skb mode with direct
attach, and non-skb with indirect attach.
Re-split the main function into dedicated tests. Each test now must have
its own setup/teardown, but for the advantage of being able to run them
separately. While at it, make sure that tests attaching the bpf programs
are run in a dedicated ns.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-4-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The flow dissector test currently relies on generic CHECK macros to
perform tests. Update those to newer, more-specific ASSERT macros.
This update allows to get rid of the global duration variable, which was
needed by the CHECK macros
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-3-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The flow_dissector program currently compares flow keys returned by bpf
program with the expected one thanks to a custom macro using memcmp.
Use the new ASSERT_MEMEQ macro to perform this comparision. This update
also allows to get rid of the unused bpf_test_run_opts variable in
run_tests_skb_less (it was only used by the CHECK macro for its duration
field)
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-2-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add this to more comprehensively test the socket memory accounting logic
in the __SK_REDIRECT and __SK_DROP cases of tcp_bpf_sendmsg. We don't have
test when apply_bytes are not zero in test_txmsg_redir_wait_sndmem.
test_send_large has opt->rate=2, it will invoke sendmsg two times.
Specifically, the first sendmsg will trigger the case where the ret value
of tcp_bpf_sendmsg_redir is less than 0; while the second sendmsg happens
after the 3 seconds timeout, and it will trigger __SK_DROP because socket
c2 has been removed from the sockmap/hash.
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241016234838.3167769-2-zijianzhang@bytedance.com
CONFIG_PREEMPT is a preemtion model the so called "Low-Latency Desktop".
A different preemption model is PREEMPT_RT the so called "Real-Time".
Both implement preemption in kernel and set CONFIG_PREEMPTION.
There is also the so called "LAZY PREEMPT" which the "Scheduler
controlled preemption model". Here we have also preemption in the kernel
the rules are slightly different.
Therefore the testsuite should not check for CONFIG_PREEMPT (as one
model) but for CONFIG_PREEMPTION to figure out if preemption in the
kernel is possible.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20241119161819.qvEcs-n_@linutronix.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core
----
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infra is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL
knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read
access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code
--------------------------------------------
- Add small file operations for debugfs, to reduce the struct ops size.
- Refactoring and optimization for the implementation of page_frag API,
This is a preparatory work to consolidate the page_frag
implementation.
Netfilter
---------
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users
the option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent
CI improvements.
BPF
---
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols
---------
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after close,
the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per device
neigh lists.
Driver API
----------
- Introduce a unified interface to configure transmission H/W shaping,
and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling
-----------------
- forwarding: introduce deferred commands, to simplify
the cleanup phase
Drivers
-------
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- adds support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Adds representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- adds support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implements page pool support
- macsec:
- inherit lower device's features and TSO limits when offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- Add the dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- adds clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=GzPr
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core:
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of
rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infrastructure is guarded by the
CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code:
- Add small file operations for debugfs, to reduce the struct ops
size.
- Refactoring and optimization for the implementation of page_frag
API, This is a preparatory work to consolidate the page_frag
implementation.
Netfilter:
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users the
option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent CI
improvements.
BPF:
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols:
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after
close, the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state
lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per
device neigh lists.
Driver API:
- Introduce a unified interface to configure transmission H/W
shaping, and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling:
- forwarding: introduce deferred commands, to simplify the cleanup
phase
Drivers:
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- add support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Add representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- add support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implement page pool support
- macsec:
- inherit lower device's features and TSO limits when
offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- add dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- add clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature"
* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
mm: page_frag: fix a compile error when kernel is not compiled
Documentation: tipc: fix formatting issue in tipc.rst
selftests: nic_performance: Add selftest for performance of NIC driver
selftests: nic_link_layer: Add selftest case for speed and duplex states
selftests: nic_link_layer: Add link layer selftest for NIC driver
bnxt_en: Add FW trace coredump segments to the coredump
bnxt_en: Add a new ethtool -W dump flag
bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
bnxt_en: Add functions to copy host context memory
bnxt_en: Do not free FW log context memory
bnxt_en: Manage the FW trace context memory
bnxt_en: Allocate backing store memory for FW trace logs
bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
bnxt_en: Refactor bnxt_free_ctx_mem()
bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
bnxt_en: Update firmware interface spec to 1.10.3.85
selftests/bpf: Add some tests with sockmap SK_PASS
bpf: fix recursive lock when verdict program return SK_PASS
wireguard: device: support big tcp GSO
wireguard: selftests: load nf_conntrack if not present
...
Add a new tests in sockmap_basic.c to test SK_PASS for sockmap
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20241118030910.36230-3-mrpre@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
llvm 19 fails to compile arena self test:
CLNG-BPF [test_progs] verifier_arena_large.bpf.o
progs/verifier_arena_large.c:90:24: error: unsupported signed division, please convert to unsigned div/mod.
90 | pg_idx = (pg - base) / PAGE_SIZE;
Though llvm <= 18 and llvm >= 20 don't have this issue,
fix the test to avoid the build error.
Reported-by: Jiri Olsa <olsajiri@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCZzZUwAAKCRAraS+Z+3y5
E54pAP9kim6BVXVngcMBmyAKa1Fr0zLGj/Ds1JB+KFfQ/0v80wD/ebVpoIEoKHs9
/Xl/3WfN3JzIi9+mqIauENH6DTUQPAo=
=MWOY
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2024-11-14
We've added 9 non-merge commits during the last 4 day(s) which contain
a total of 3 files changed, 226 insertions(+), 84 deletions(-).
The main changes are:
1) Fixes to bpf_msg_push/pop_data and test_sockmap. The changes has
dependency on the other changes in the bpf-next/net branch,
from Zijian Zhang.
2) Drop netns codes from mptcp test. Reuse the common helpers in
test_progs, from Geliang Tang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
bpf, sockmap: Fix sk_msg_reset_curr
bpf, sockmap: Several fixes to bpf_msg_pop_data
bpf, sockmap: Several fixes to bpf_msg_push_data
selftests/bpf: Add more tests for test_txmsg_push_pop in test_sockmap
selftests/bpf: Add push/pop checking for msg_verify_data in test_sockmap
selftests/bpf: Fix total_bytes in msg_loop_rx in test_sockmap
selftests/bpf: Fix SENDPAGE data logic in test_sockmap
selftests/bpf: Add txmsg_pass to pull/push/pop in test_sockmap
selftests/bpf: Drop netns helpers in mptcp
====================
Link: https://patch.msgid.link/20241114202832.3187927-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test that verifies specific behavior of arena range tree
algorithm and adjust existing big_alloc1 test due to use
of global data in arena.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20241108025616.17625-3-alexei.starovoitov@gmail.com
Cross-merge bpf fixes after downstream PR.
In particular to bring the fix in
commit aa30eb3260 ("bpf: Force checkpoint when jmp history is too long").
The follow up verifier work depends on it.
And the fix in
commit 6801cf7890 ("selftests/bpf: Use -4095 as the bad address for bits iterator").
It's fixing instability of BPF CI on s390 arch.
No conflicts.
Adjacent changes in:
Auto-merging arch/Kconfig
Auto-merging kernel/bpf/helpers.c
Auto-merging kernel/bpf/memalloc.c
Auto-merging kernel/bpf/verifier.c
Auto-merging mm/slab_common.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add three tests for struct_ops using private stack.
./test_progs -t struct_ops_private_stack
#336/1 struct_ops_private_stack/private_stack:OK
#336/2 struct_ops_private_stack/private_stack_fail:OK
#336/3 struct_ops_private_stack/private_stack_recur:OK
#336 struct_ops_private_stack:OK
The following is a snippet of a struct_ops check_member() implementation:
u32 moff = __btf_member_bit_offset(t, member) / 8;
switch (moff) {
case offsetof(struct bpf_testmod_ops3, test_1):
prog->aux->priv_stack_requested = true;
prog->aux->recursion_detected = test_1_recursion_detected;
fallthrough;
default:
break;
}
return 0;
The first test is with nested two different callback functions where the
first prog has more than 512 byte stack size (including subprogs) with
private stack enabled.
The second test is a negative test where the second prog has more than 512
byte stack size without private stack enabled.
The third test is the same callback function recursing itself. At run time,
the jit trampoline recursion check kicks in to prevent the recursion. The
recursion_detected() callback function is implemented by the bpf_testmod,
the following message in dmesg
bpf_testmod: oh no, recursing into test_1, recursion_misses 1
demonstrates the callback function is indeed triggered when recursion miss
happens.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241112163938.2225528-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some private stack tests are added including:
- main prog only with stack size greater than BPF_PSTACK_MIN_SIZE.
- main prog only with stack size smaller than BPF_PSTACK_MIN_SIZE.
- prog with one subprog having MAX_BPF_STACK stack size and another
subprog having non-zero small stack size.
- prog with callback function.
- prog with exception in main prog or subprog.
- prog with async callback without nesting
- prog with async callback with possible nesting
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241112163927.2224750-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Similar to commit [1] sample perf events less often in
test_send_signal_nmi(). This should reduce perf events throttling.
[1] 7015843afc ("selftests/bpf: Fix send_signal test with nested CONFIG_PARAVIRT")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241112110906.3045278-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The following invocation:
$ t1=send_signal/send_signal_perf_thread_remote \
t2=send_signal/send_signal_nmi_thread_remote \
./test_progs -t $t1,$t2
Leads to send_signal_nmi_thread_remote to be stuck
on a line 180:
/* wait for result */
err = read(pipe_c2p[0], buf, 1);
In this test case:
- perf event PERF_COUNT_HW_CPU_CYCLES is created for parent process;
- BPF program is attached to perf event, and sends a signal to child
process when event occurs;
- parent program burns some CPU in busy loop and calls read() to get
notification from child that it received a signal.
The perf event is declared with .sample_period = 1.
This forces perf to throttle events, and under some unclear conditions
the event does not always occur while parent is in busy loop.
After parent enters read() system call CPU cycles event won't be
generated for parent anymore. Thus, if perf event had not occurred
already the test is stuck.
This commit updates the parent to wait for notification with a timeout,
doing several iterations of busy loop + read_with_timeout().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241112110906.3045278-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
int read_with_timeout(int fd, char *buf, size_t count, long usec)
As a regular read(2), but allows to specify a timeout in
micro-seconds. Returns -EAGAIN on timeout.
Implemented using select().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241112110906.3045278-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit provides a watchdog timer that sets a limit of how long a
single sub-test could run:
- if sub-test runs for 10 seconds, the name of the test is printed
(currently the name of the test is printed only after it finishes);
- if sub-test runs for 120 seconds, the running thread is terminated
with SIGSEGV (to trigger crash_handler() and get a stack trace).
Specifically:
- the timer is armed on each call to run_one_test();
- re-armed at each call to test__start_subtest();
- is stopped when exiting run_one_test().
Default timeout could be overridden using '-w' or '--watchdog-timeout'
options. Value 0 can be used to turn the timer off.
Here is an example execution:
$ ./ssh-exec.sh ./test_progs -w 5 -t \
send_signal/send_signal_perf_thread_remote,send_signal/send_signal_nmi_thread_remote
WATCHDOG: test case send_signal/send_signal_nmi_thread_remote executes for 5 seconds, terminating with SIGSEGV
Caught signal #11!
Stack trace:
./test_progs(crash_handler+0x1f)[0x9049ef]
/lib64/libc.so.6(+0x40d00)[0x7f1f1184fd00]
/lib64/libc.so.6(read+0x4a)[0x7f1f1191cc4a]
./test_progs[0x720dd3]
./test_progs[0x71ef7a]
./test_progs(test_send_signal+0x1db)[0x71edeb]
./test_progs[0x9066c5]
./test_progs(main+0x5ed)[0x9054ad]
/lib64/libc.so.6(+0x2a088)[0x7f1f11839088]
/lib64/libc.so.6(__libc_start_main+0x8b)[0x7f1f1183914b]
./test_progs(_start+0x25)[0x527385]
#292 send_signal:FAIL
test_send_signal_common:PASS:reading pipe 0 nsec
test_send_signal_common:PASS:reading pipe error: size 0 0 nsec
test_send_signal_common:PASS:incorrect result 0 nsec
test_send_signal_common:PASS:pipe_write 0 nsec
test_send_signal_common:PASS:setpriority 0 nsec
Timer is implemented using timer_{create,start} librt API.
Internally librt uses pthreads for SIGEV_THREAD timers,
so this change adds a background timer thread to the test process.
Because of this a few checks in tests 'bpf_iter' and 'iters'
need an update to account for an extra thread.
For parallelized scenario the watchdog is also created for each worker
fork. If one of the workers gets stuck, it would be terminated by a
watchdog. In theory, this might lead to a scenario when all worker
threads are exhausted, however this should not be a problem for
server_main(), as it would exit with some of the tests not run.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241112110906.3045278-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Logic to prevent callbacks from acquiring new references for the program
(i.e. leaving acquired references), and releasing caller references
(i.e. those acquired in parent frames) was introduced in commit
9d9d00ac29 ("bpf: Fix reference state management for synchronous callbacks").
This was necessary because back then, the verifier simulated each
callback once (that could potentially be executed N times, where N can
be zero). This meant that callbacks that left lingering resources or
cleared caller resources could do it more than once, operating on
undefined state or leaking memory.
With the fixes to callback verification in commit
ab5cfac139 ("bpf: verify callbacks as if they are called unknown number of times"),
all of this extra logic is no longer necessary. Hence, drop it as part
of this commit.
Cc: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241109231430.2475236-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The timer_lockup test needs 2 CPUs to work, on single-CPU nodes it fails
to set thread affinity to CPU 1 since it doesn't exist:
# ./test_progs -t timer_lockup
test_timer_lockup:PASS:timer_lockup__open_and_load 0 nsec
test_timer_lockup:PASS:pthread_create thread1 0 nsec
test_timer_lockup:PASS:pthread_create thread2 0 nsec
timer_lockup_thread:PASS:cpu affinity 0 nsec
timer_lockup_thread:FAIL:cpu affinity unexpected error: 22 (errno 0)
test_timer_lockup:PASS: 0 nsec
#406 timer_lockup:FAIL
Skip the test if only 1 CPU is available.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Fixes: 50bd5a0c65 ("selftests/bpf: Add timer lockup selftest")
Tested-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241107115231.75200-1-vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Add test cases to verify the following four update operations on htab of
maps don't trigger lockdep warning:
(1) add then delete
(2) add, overwrite, then delete
(3) add, then lookup_and_delete
(4) add two elements, then lookup_and_delete_batch
Test cases are added for pre-allocated and non-preallocated htab of maps
respectively.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241106063542.357743-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Moving the definition of ENOTSUPP into bpf_util.h to remove the
duplicated definitions in multiple files.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241106063542.357743-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
With recent uprobe fix [1] the sync time after unregistering uprobe is
much longer and prolongs the consumer test which creates and destroys
hundreds of uprobes.
This change adds 16 threads (which fits the test logic) and speeds up
the test.
Before the change:
# perf stat --null ./test_progs -t uprobe_multi_test/consumers
#421/9 uprobe_multi_test/consumers:OK
#421 uprobe_multi_test:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Performance counter stats for './test_progs -t uprobe_multi_test/consumers':
28.818778973 seconds time elapsed
0.745518000 seconds user
0.919186000 seconds sys
After the change:
# perf stat --null ./test_progs -t uprobe_multi_test/consumers 2>&1
#421/9 uprobe_multi_test/consumers:OK
#421 uprobe_multi_test:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Performance counter stats for './test_progs -t uprobe_multi_test/consumers':
3.504790814 seconds time elapsed
0.012141000 seconds user
0.751760000 seconds sys
[1] commit 87195a1ee3 ("uprobes: switch to RCU Tasks Trace flavor for better performance")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-14-jolsa@kernel.org
Adding uprobe session consumers to the consumer test,
so we get the session into the test mix.
In addition scaling down the test to have just 1 uprobe
and 1 uretprobe, otherwise the test time grows and is
unsuitable for CI even with threads.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-13-jolsa@kernel.org
Testing that the session ret_handler bypass works on single
uprobe with multiple consumers, each with different session
ignore return value.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-12-jolsa@kernel.org
Making sure kprobe.session program can return only [0,1] values.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-11-jolsa@kernel.org
Making sure uprobe.session program can return only [0,1] values.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-10-jolsa@kernel.org
Adding uprobe session test that verifies the cookie value is stored
properly when single uprobe-ed function is executed recursively.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-9-jolsa@kernel.org
Adding uprobe session test that verifies the cookie value
get properly propagated from entry to return program.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-8-jolsa@kernel.org
Adding uprobe session test and testing that the entry program
return value controls execution of the return probe program.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-7-jolsa@kernel.org
The new uprobe changes bring some new behaviour that we need to reflect
in the consumer test. Now pending uprobe instance in the kernel can
survive longer and thus might call uretprobe consumer callbacks in
some situations in which, previously, such callback would be omitted.
We now need to take that into account in uprobe-multi consumer tests.
The idea being that uretprobe under test either stayed from before to
after (uret_stays + test_bit) or uretprobe instance survived and we
have uretprobe active in after (uret_survives + test_bit).
uret_survives just states that uretprobe survives if there are *any*
uretprobes both before and after (overlapping or not, doesn't matter)
and uprobe was attached before.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241107094337.3848210-1-jolsa@kernel.org
In order to specify extra compilation or linking flags to BPF selftests,
it is possible to set EXTRA_CFLAGS and EXTRA_LDFLAGS from the command
line. The problem is that they are not propagated to sub-make calls
(runqslower, bpftool, libbpf) and in the better case are not applied, in
the worse case cause the entire build fail.
Propagate EXTRA_CFLAGS and EXTRA_LDFLAGS to the sub-makes.
This, for instance, allows to build selftests as PIE with
$ make EXTRA_CFLAGS='-fPIE' EXTRA_LDFLAGS='-pie'
Without this change, the command would fail because libbpf.a would not
be built with -fPIE and other PIE binaries would not link against it.
The only problem is that we have to explicitly provide empty
EXTRA_CFLAGS='' and EXTRA_LDFLAGS='' to the builds of kernel modules as
we don't want to build modules with flags used for userspace (the above
example would fail as kernel doesn't support PIE).
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Add more tests for test_txmsg_push_pop in test_sockmap for better coverage
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-6-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add push/pop checking for msg_verify_data in test_sockmap, except for
pop/push with cork tests, in these tests the logic will be different.
1. With corking, pop/push might not be invoked in each sendmsg, it makes
the layout of the received data difficult
2. It makes it hard to calculate the total_bytes in the recvmsg
Temporarily skip the data integrity test for these cases now, added a TODO
Fixes: ee9b352ce4 ("selftests/bpf: Fix msg_verify_data in test_sockmap")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-5-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
total_bytes in msg_loop_rx should also take push into account, otherwise
total_bytes will be a smaller value, which makes the msg_loop_rx end early.
Besides, total_bytes has already taken pop into account, so we don't need
to subtract some bytes from iov_buf in sendmsg_test. The additional
subtraction may make total_bytes a negative number, and msg_loop_rx will
just end without checking anything.
Fixes: 18d4e900a4 ("bpf: Selftests, improve test_sockmap total bytes counter")
Fixes: d69672147f ("selftests, bpf: Add one test for sockmap with strparser")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-4-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
In the SENDPAGE test, "opt->iov_length * cnt" size of data will be sent
cnt times by sendfile.
1. In push/pop tests, they will be invoked cnt times, for the simplicity of
msg_verify_data, change chunk_sz to iov_length
2. Change iov_length in test_send_large from 1024 to 8192. We have pop test
where txmsg_start_pop is 4096. 4096 > 1024, an error will be returned.
Fixes: 328aa08a08 ("bpf: Selftests, break down test_sockmap into subtests")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-3-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add txmsg_pass to test_txmsg_pull/push/pop. If txmsg_pass is missing,
tx_prog will be NULL, and no program will be attached to the sockmap.
As a result, pull/push/pop are never invoked.
Fixes: 328aa08a08 ("bpf: Selftests, break down test_sockmap into subtests")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-2-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
New netns selftest helpers netns_new() and netns_free() has been added
in network_helpers.c, let's use them in mptcp selftests too instead of
using MPTCP's own helpers create_netns() and cleanup_netns().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/c02fda3177b34f9e74a044833fda9761627f4d07.1730338692.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
As reported by Byeonguk, the bad_words test in verifier_bits_iter.c
occasionally fails on s390 host. Quoting Ilya's explanation:
s390 kernel runs in a completely separate address space, there is no
user/kernel split at TASK_SIZE. The same address may be valid in both
the kernel and the user address spaces, there is no way to tell by
looking at it. The config option related to this property is
ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE.
Also, unfortunately, 0 is a valid address in the s390 kernel address
space.
Fix the issue by using -4095 as the bad address for bits iterator, as
suggested by Ilya. Verify that bpf_iter_bits_new() returns -EINVAL for
NULL address and -EFAULT for bad address.
Fixes: ebafc1e535 ("selftests/bpf: Add three test cases for bits_iter")
Reported-by: Byeonguk Jeong <jungbu2855@gmail.com>
Closes: https://lore.kernel.org/bpf/ZycSXwjH4UTvx-Cn@ub22/
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20241105043057.3371482-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Ensure that trusted PTR_TO_BTF_ID accesses perform PROBE_MEM handling in
raw_tp program. Without the previous fix, this selftest crashes the
kernel due to a NULL-pointer dereference. Also ensure that dead code
elimination does not kick in for checks on the pointer.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241104171959.2938862-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Availability of the gettid definition across glibc versions supported by
BPF selftests is not certain. Currently, all users in the tree open-code
syscall to gettid. Convert them to a common macro definition.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241104171959.2938862-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Arguments to a raw tracepoint are tagged as trusted, which carries the
semantics that the pointer will be non-NULL. However, in certain cases,
a raw tracepoint argument may end up being NULL. More context about this
issue is available in [0].
Thus, there is a discrepancy between the reality, that raw_tp arguments
can actually be NULL, and the verifier's knowledge, that they are never
NULL, causing explicit NULL checks to be deleted, and accesses to such
pointers potentially crashing the kernel.
To fix this, mark raw_tp arguments as PTR_MAYBE_NULL, and then special
case the dereference and pointer arithmetic to permit it, and allow
passing them into helpers/kfuncs; these exceptions are made for raw_tp
programs only. Ensure that we don't do this when ref_obj_id > 0, as in
that case this is an acquired object and doesn't need such adjustment.
The reason we do mask_raw_tp_trusted_reg logic is because other will
recheck in places whether the register is a trusted_reg, and then
consider our register as untrusted when detecting the presence of the
PTR_MAYBE_NULL flag.
To allow safe dereference, we enable PROBE_MEM marking when we see loads
into trusted pointers with PTR_MAYBE_NULL.
While trusted raw_tp arguments can also be passed into helpers or kfuncs
where such broken assumption may cause issues, a future patch set will
tackle their case separately, as PTR_TO_BTF_ID (without PTR_TRUSTED) can
already be passed into helpers and causes similar problems. Thus, they
are left alone for now.
It is possible that these checks also permit passing non-raw_tp args
that are trusted PTR_TO_BTF_ID with null marking. In such a case,
allowing dereference when pointer is NULL expands allowed behavior, so
won't regress existing programs, and the case of passing these into
helpers is the same as above and will be dealt with later.
Also update the failure case in tp_btf_nullable selftest to capture the
new behavior, as the verifier will no longer cause an error when
directly dereference a raw tracepoint argument marked as __nullable.
[0]: https://lore.kernel.org/bpf/ZrCZS6nisraEqehw@jlelli-thinkpadt14gen4.remote.csb
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Reported-by: Juri Lelli <juri.lelli@redhat.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Fixes: 3f00c52393 ("bpf: Allow trusted pointers to be passed to KF_TRUSTED_ARGS kfuncs")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241104171959.2938862-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are similar checks for covering locks, references, RCU read
sections and preempt_disable sections in 3 places in the verifer, i.e.
for tail calls, bpf_ld_[abs, ind], and exit path (for BPF_EXIT and
bpf_throw). Unify all of these into a common check_resource_leak
function to avoid code duplication.
Also update the error strings in selftests to the new ones in the same
change to ensure clean bisection.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241103225940.1408302-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZyP6TxUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISINz7QD/RTuJAzPJXPQmjdzMj7pepjnSQH4K
DnOc1soDqjJPSFkBAMlklDCZqSsFoNtNxagbyILrYQBC/MsV9jngimK46DEN
=pDzC
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-10-31
We've added 13 non-merge commits during the last 16 day(s) which contain
a total of 16 files changed, 710 insertions(+), 668 deletions(-).
The main changes are:
1) Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it, from Puranjay Mohan.
2) Rewrite and migrate the test_tcp_check_syncookie.sh BPF selftest
into test_progs so that it can be run in BPF CI, from Alexis Lothoré.
3) Two BPF sockmap selftest fixes, from Zijian Zhang.
4) Small XDP synproxy BPF selftest cleanup to remove IP_DF check,
from Vincent Li.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Add a selftest for bpf_csum_diff()
selftests/bpf: Don't mask result of bpf_csum_diff() in test_verifier
bpf: bpf_csum_diff: Optimize and homogenize for all archs
net: checksum: Move from32to16() to generic header
selftests/bpf: remove xdp_synproxy IP_DF check
selftests/bpf: remove test_tcp_check_syncookie
selftests/bpf: test MSS value returned with bpf_tcp_gen_syncookie
selftests/bpf: add ipv4 and dual ipv4/ipv6 support in btf_skc_cls_ingress
selftests/bpf: get rid of global vars in btf_skc_cls_ingress
selftests/bpf: add missing ns cleanups in btf_skc_cls_ingress
selftests/bpf: factorize conn and syncookies tests in a single runner
selftests/bpf: Fix txmsg_redir of test_txmsg_pull in test_sockmap
selftests/bpf: Fix msg_verify_data in test_sockmap
====================
Link: https://patch.msgid.link/20241031221543.108853-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There exist compiler flags supported by GCC but not supported by Clang
(e.g. -specs=...). Currently, these cannot be passed to BPF selftests
builds, even when building with GCC, as some binaries (urandom_read and
liburandom_read.so) are always built with Clang and the unsupported
flags make the compilation fail (as -Werror is turned on).
Add -Wno-unused-command-line-argument to these rules to suppress such
errors.
This allows to do things like:
$ CFLAGS="-specs=/usr/lib/rpm/redhat/redhat-hardened-cc1" \
make -C tools/testing/selftests/bpf
Without this patch, the compilation would fail with:
[...]
clang: error: argument unused during compilation: '-specs=/usr/lib/rpm/redhat/redhat-hardened-cc1' [-Werror,-Wunused-command-line-argument]
make: *** [Makefile:273: /bpf-next/tools/testing/selftests/bpf/liburandom_read.so] Error 1
[...]
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/2d349e9d5eb0a79dd9ff94b496769d64e6ff7654.1730449390.git.vmalik@redhat.com
The new subtest runs with bpf_prog_test_run_opts() as a syscall prog.
It iterates the kmem_cache using bpf_for_each loop and count the number
of entries. Finally it checks it with the number of entries from the
regular iterator.
$ ./vmtest.sh -- ./test_progs -t kmem_cache_iter
...
#130/1 kmem_cache_iter/check_task_struct:OK
#130/2 kmem_cache_iter/check_slabinfo:OK
#130/3 kmem_cache_iter/open_coded_iter:OK
#130 kmem_cache_iter:OK
Summary: 1/3 PASSED, 0 SKIPPED, 0 FAILED
Also simplify the code by using attach routine of the skeleton.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241030222819.1800667-2-namhyung@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add more test cases for bits iterator:
(1) huge word test
Verify the multiplication overflow of nr_bits in bits_iter. Without
the overflow check, when nr_words is 67108865, nr_bits becomes 64,
causing bpf_probe_read_kernel_common() to corrupt the stack.
(2) max word test
Verify correct handling of maximum nr_words value (511).
(3) bad word test
Verify early termination of bits iteration when bits iterator
initialization fails.
Also rename bits_nomem to bits_too_big to better reflect its purpose.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241030100516.3633640-6-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a selftest for the bpf_csum_diff() helper. This selftests runs the
helper in all three configurations(push, pull, and diff) and verifies
its output. The correct results have been computed by hand and by the
helper's older implementation.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20241026125339.26459-5-puranjay@kernel.org
The bpf_csum_diff() helper has been fixed to return a 16-bit value for
all archs, so now we don't need to mask the result.
This commit is basically reverting the below:
commit 6185266c5a ("selftests/bpf: Mask bpf_csum_diff() return value
to 16 bits in test_verifier")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20241026125339.26459-4-puranjay@kernel.org
Drop bpf_iter.h header which uses vmlinux.h but re-defines a bunch of
iterator structures and some of BPF constants for use in BPF iterator
selftests.
None of that is necessary when fresh vmlinux.h header is generated for
vmlinux image that matches latest selftests. So drop ugly hacks and have
a nice plain vmlinux.h usage everywhere.
We could do the same with all the kfunc __ksym redefinitions, but that
has dependency on very fresh pahole, so I'm not addressing that here.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241029203919.1948941-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test for out-of-bounds write in trie_get_next_key() when a full
path from root to leaf exists and bpf_map_get_next_key() is called
with the leaf node. It may crashes the kernel on failure, so please
run in a VM.
Signed-off-by: Byeonguk Jeong <jungbu2855@gmail.com>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/Zxx4ep78tsbeWPVM@localhost.localdomain
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In real world production websites, the IP_DF flag
is not always set for each packet from these websites.
the IP_DF flag check breaks Internet connection to
these websites for home based firewall like BPFire
when XDP synproxy program is attached to firewall
Internet facing side interface. see [0]
[0] https://github.com/vincentmli/BPFire/issues/59
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
Link: https://lore.kernel.org/r/20241025031952.1351150-1-vincent.mc.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The test added is a simplified reproducer from syzbot report [1].
If verifier does not insert checkpoint somewhere inside the loop,
verification of the program would take a very long time.
This would happen because mark_chain_precision() for register r7 would
constantly trace jump history of the loop back, processing many
iterations for each mark_chain_precision() call.
[1] https://lore.kernel.org/bpf/670429f6.050a0220.49194.0517.GAE@google.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20241029172641.1042523-2-eddyz87@gmail.com
As we can see from the title, when I compiled the selftests/bpf, I
saw the error:
implicit declaration of function ‘gettid’ ; did you mean ‘getgid’? [-Werror=implicit-function-declaration]
skel->bss->tid = gettid();
^~~~~~
getgid
Directly call the syscall solves this issue.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20241029074627.80289-1-kerneljasonxing@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch tests the map creation failure when the map_value
has unsupported uptr. The three cases are the struct is larger
than one page, the struct is empty, and the struct is a kernel struct.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20241023234759.860539-13-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch test the following failures in syscall update_elem
1. The first update_elem(BPF_F_LOCK) should be EOPNOTSUPP. syscall.c takes
care of unpinning the uptr.
2. The second update_elem(BPF_EXIST) fails. syscall.c takes care of
unpinning the uptr.
3. The forth update_elem(BPF_NOEXIST) fails. bpf_local_storage_update
takes care of unpinning the uptr.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20241023234759.860539-11-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch tests the case when uptr has a struct spanning across two
pages. It is not supported now and EOPNOTSUPP is expected from the
syscall update_elem.
It also tests the whole uptr struct located exactly at the
end of a page and ensures that this case is accepted by update_elem.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20241023234759.860539-10-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make sure the memory of uptrs have been mapped to the kernel properly.
Also ensure the values of uptrs in the kernel haven't been copied
to userspace.
It also has the syscall update_elem/delete_elem test to test the
pin/unpin code paths.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20241023234759.860539-9-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new subtest validating that bpf_object loaded and initialized
through generic APIs is still interoperable with BPF subskeleton,
including initialization and reading of global variables.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241023043908.3834423-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Global variables of special types (like `struct bpf_spin_lock`) make
underlying ARRAY maps non-mmapable. To make this work with libbpf's
mmaping logic, application is expected to declare such special variables
as static, so libbpf doesn't even attempt to mmap() such ARRAYs.
test_spin_lock_fail.c didn't follow this rule, but given it relied on
this test to trigger failures, this went unnoticed, as we never got to
the step of mmap()'ing these ARRAY maps.
It is fragile and relies on specific sequence of libbpf steps, which are
an internal implementation details.
Fix the test by marking lockA and lockB as static.
Fixes: c48748aea4 ("selftests/bpf: Add failure test cases for spin lock pairing")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241023043908.3834423-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding data pointer to both entry and exit consumer handlers and all
its users. The functionality itself is coming in following change.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241018202252.693462-2-jolsa@kernel.org
The current default buffer size of 16MB allocated by veristat is no
longer sufficient to hold the verifier logs of some production BPF
programs. To address this issue, we need to increase the verifier log
limit.
Commit 7a9f5c65ab ("bpf: increase verifier log limit") has already
increased the supported buffer size by the kernel, but veristat users
need to explicitly pass a log size argument to use the bigger log.
This patch adds a function to detect the maximum verifier log size
supported by the kernel and uses that by default in veristat.
This ensures that veristat can handle larger verifier logs without
requiring users to manually specify the log size.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241023155314.126255-1-mykyta.yatsenko5@gmail.com
Move the "load w/o expected_attach_type" test case to
prog_tests/sock_create.c and drop the remaining test case, as it is made
redundant with the existing coverage inside prog_tests/sock_create.c.
Signed-off-by: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/r/20241022152913.574836-4-jrife@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Move LOAD_REJECT test cases from test_sock.c to an equivalent set of
verifier tests in progs/verifier_sock.c.
Signed-off-by: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/r/20241022152913.574836-3-jrife@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Move all BPF_CGROUP_INET6_POST_BIND and BPF_CGROUP_INET4_POST_BIND test
cases to a new prog_test, prog_tests/sock_post_bind.c, except for
LOAD_REJECT test cases.
Signed-off-by: Jordan Rife <jrife@google.com>
Link: https://lore.kernel.org/r/20241022152913.574836-2-jrife@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add testcases to test bpf_send_signal_task(). In these new test cases,
the main process triggers the BPF program and the forked process
receives the signals. The target process's signal handler receives a
cookie from the bpf program.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241016084136.10305-3-puranjay@kernel.org
Now that btf_skc_cls_ingress has the same coverage as
test_tcp_check_syncookie, remove the second one and keep the first one
as it is integrated in test_progs
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241020-syncookie-v2-6-2db240225fed@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
One remaining difference between test_tcp_check_syncookie.sh and
btf_skc_cls_ingress is a small test on the mss value embedded in the
cookie generated with the eBPF helper.
Bring the corresponding test in btf_skc_cls_ingress.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241020-syncookie-v2-5-2db240225fed@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
btf_skc_cls_ingress test currently checks that syncookie and
bpf_sk_assign/release helpers behave correctly in multiple scenarios,
but only with ipv6 socket.
Increase those helpers coverage by adding testing support for IPv4
sockets and IPv4/IPv6 sockets. The rework is mostly based on features
brought earlier in test_tcp_check_syncookie.sh to cover some fixes
performed on those helpers, but test_tcp_check_syncookie.sh is not
integrated in test_progs. The most notable changes linked to this are:
- some rework in the corresponding eBPF program to support both types of
traffic
- the switch from start_server to start_server_str to allow to check
some socket options
- the introduction of new subtests for ipv4 and ipv4/ipv6
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241020-syncookie-v2-4-2db240225fed@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
There are a few global variables in btf_skc_cls_ingress.c, which are not
really used by different tests. Get rid of those global variables, by
performing the following updates:
- make srv_sa6 local to the main runner function
- make skel local to the main function, and propagate it through
function arguments
- get rid of duration by replacing CHECK macros with the ASSERT_XXX
macros. While updating those assert macros:
- do not return early on asserts performing some actual tests, let the
other tests run as well (keep the early return for parts handling
test setup)
- instead of converting the CHECK on skel->bss->linum, just remove it,
since there is already a call to print_err_line after the test to
print the failing line in the bpf program
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241020-syncookie-v2-3-2db240225fed@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
btf_skc_cls_ingress.c currently runs two subtests, and create a
dedicated network namespace for each, but never cleans up the created
namespace once the test has ended.
Add missing namespace cleanup after each subtest to avoid accumulating
namespaces for each new subtest. While at it, switch namespace
management to netns_{new,free}
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241020-syncookie-v2-2-2db240225fed@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
btf_skc_cls_ingress currently describe two tests, both running a simple
tcp server and then initializing a connection to it. The sole difference
between the tests is about the tcp_syncookie configuration, and some
checks around this feature being enabled/disabled.
Share the common code between those two tests by moving the code into a
single runner, parameterized by a "gen_cookies" argument. Split the
performed checks accordingly.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241020-syncookie-v2-1-2db240225fed@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
- Fix BPF verifier to not affect subreg_def marks in its range
propagation, from Eduard Zingerman.
- Fix a truncation bug in the BPF verifier's handling of
coerce_reg_to_size_sx, from Dimitar Kanaliev.
- Fix the BPF verifier's delta propagation between linked
registers under 32-bit addition, from Daniel Borkmann.
- Fix a NULL pointer dereference in BPF devmap due to missing
rxq information, from Florian Kauer.
- Fix a memory leak in bpf_core_apply, from Jiri Olsa.
- Fix an UBSAN-reported array-index-out-of-bounds in BTF
parsing for arrays of nested structs, from Hou Tao.
- Fix build ID fetching where memory areas backing the file
were created with memfd_secret, from Andrii Nakryiko.
- Fix BPF task iterator tid filtering which was incorrectly
using pid instead of tid, from Jordan Rome.
- Several fixes for BPF sockmap and BPF sockhash redirection
in combination with vsocks, from Michal Luczaj.
- Fix riscv BPF JIT and make BPF_CMPXCHG fully ordered,
from Andrea Parri.
- Fix riscv BPF JIT under CONFIG_CFI_CLANG to prevent the
possibility of an infinite BPF tailcall, from Pu Lehui.
- Fix a build warning from resolve_btfids that bpf_lsm_key_free
cannot be resolved, from Thomas Weißschuh.
- Fix a bug in kfunc BTF caching for modules where the wrong
BTF object was returned, from Toke Høiland-Jørgensen.
- Fix a BPF selftest compilation error in cgroup-related tests
with musl libc, from Tony Ambardar.
- Several fixes to BPF link info dumps to fill missing fields,
from Tyrone Wu.
- Add BPF selftests for kfuncs from multiple modules, checking
that the correct kfuncs are called, from Simon Sundberg.
- Ensure that internal and user-facing bpf_redirect flags
don't overlap, also from Toke Høiland-Jørgensen.
- Switch to use kvzmalloc to allocate BPF verifier environment,
from Rik van Riel.
- Use raw_spinlock_t in BPF ringbuf to fix a sleep in atomic
splat under RT, from Wander Lairson Costa.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZxK4OhUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISIOCrwEAib2kC5EEQn5+wKVE/bnZryVX2leT
YXdfItDCBU6zCYUA+wTU5hGGn9lcDUcZx72l/KZPDyPw7HdzNJ+6iR1zQqoM
=f9kv
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Daniel Borkmann:
- Fix BPF verifier to not affect subreg_def marks in its range
propagation (Eduard Zingerman)
- Fix a truncation bug in the BPF verifier's handling of
coerce_reg_to_size_sx (Dimitar Kanaliev)
- Fix the BPF verifier's delta propagation between linked registers
under 32-bit addition (Daniel Borkmann)
- Fix a NULL pointer dereference in BPF devmap due to missing rxq
information (Florian Kauer)
- Fix a memory leak in bpf_core_apply (Jiri Olsa)
- Fix an UBSAN-reported array-index-out-of-bounds in BTF parsing for
arrays of nested structs (Hou Tao)
- Fix build ID fetching where memory areas backing the file were
created with memfd_secret (Andrii Nakryiko)
- Fix BPF task iterator tid filtering which was incorrectly using pid
instead of tid (Jordan Rome)
- Several fixes for BPF sockmap and BPF sockhash redirection in
combination with vsocks (Michal Luczaj)
- Fix riscv BPF JIT and make BPF_CMPXCHG fully ordered (Andrea Parri)
- Fix riscv BPF JIT under CONFIG_CFI_CLANG to prevent the possibility
of an infinite BPF tailcall (Pu Lehui)
- Fix a build warning from resolve_btfids that bpf_lsm_key_free cannot
be resolved (Thomas Weißschuh)
- Fix a bug in kfunc BTF caching for modules where the wrong BTF object
was returned (Toke Høiland-Jørgensen)
- Fix a BPF selftest compilation error in cgroup-related tests with
musl libc (Tony Ambardar)
- Several fixes to BPF link info dumps to fill missing fields (Tyrone
Wu)
- Add BPF selftests for kfuncs from multiple modules, checking that the
correct kfuncs are called (Simon Sundberg)
- Ensure that internal and user-facing bpf_redirect flags don't overlap
(Toke Høiland-Jørgensen)
- Switch to use kvzmalloc to allocate BPF verifier environment (Rik van
Riel)
- Use raw_spinlock_t in BPF ringbuf to fix a sleep in atomic splat
under RT (Wander Lairson Costa)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (38 commits)
lib/buildid: Handle memfd_secret() files in build_id_parse()
selftests/bpf: Add test case for delta propagation
bpf: Fix print_reg_state's constant scalar dump
bpf: Fix incorrect delta propagation between linked registers
bpf: Properly test iter/task tid filtering
bpf: Fix iter/task tid filtering
riscv, bpf: Make BPF_CMPXCHG fully ordered
bpf, vsock: Drop static vsock_bpf_prot initialization
vsock: Update msg_count on read_skb()
vsock: Update rx_bytes on read_skb()
bpf, sockmap: SK_DROP on attempted redirects of unsupported af_vsock
selftests/bpf: Add asserts for netfilter link info
bpf: Fix link info netfilter flags to populate defrag flag
selftests/bpf: Add test for sign extension in coerce_subreg_to_size_sx()
selftests/bpf: Add test for truncation after sign extension in coerce_reg_to_size_sx()
bpf: Fix truncation bug in coerce_reg_to_size_sx()
selftests/bpf: Assert link info uprobe_multi count & path_size if unset
bpf: Fix unpopulated path_size when uprobe_multi fields unset
selftests/bpf: Fix cross-compiling urandom_read
selftests/bpf: Add test for kfunc module order
...
Previously test_task_tid was setting `linfo.task.tid`
to `getpid()` which is the same as `gettid()` for the
parent process. Instead create a new child thread
and set `linfo.task.tid` to `gettid()` to make sure
the tid filtering logic is working as expected.
Signed-off-by: Jordan Rome <linux@jordanrome.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241016210048.1213935-2-linux@jordanrome.com
txmsg_redir in "Test pull + redirect" case of test_txmsg_pull should be
1 instead of 0.
Fixes: 328aa08a08 ("bpf: Selftests, break down test_sockmap into subtests")
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Link: https://lore.kernel.org/r/20241012203731.1248619-3-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Function msg_verify_data should have context of bytes_cnt and k instead of
assuming they are zero. Otherwise, test_sockmap with data integrity test
will report some errors. I also fix the logic related to size and index j
1/ 6 sockmap::txmsg test passthrough:FAIL
2/ 6 sockmap::txmsg test redirect:FAIL
7/12 sockmap::txmsg test apply:FAIL
10/11 sockmap::txmsg test push_data:FAIL
11/17 sockmap::txmsg test pull-data:FAIL
12/ 9 sockmap::txmsg test pop-data:FAIL
13/ 1 sockmap::txmsg test push/pop data:FAIL
...
Pass: 24 Fail: 52
After applying this patch, some of the errors are solved, but for push,
pull and pop, we may need more fixes to msg_verify_data, added a TODO
10/11 sockmap::txmsg test push_data:FAIL
11/17 sockmap::txmsg test pull-data:FAIL
12/ 9 sockmap::txmsg test pop-data:FAIL
...
Pass: 37 Fail: 15
Besides, added a custom errno EDATAINTEGRITY for msg_verify_data, we
shall not ignore the error in txmsg_cork case.
Fixes: 753fb2ee09 ("bpf: sockmap, add msg_peek tests to test_sockmap")
Fixes: 16edddfe3c ("selftests/bpf: test_sockmap, check test failure")
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Link: https://lore.kernel.org/r/20241012203731.1248619-2-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add a test case to ensure that attaching a tail callee program with an
freplace program fails, and that updating an extended program to a
prog_array map is also prohibited.
This test is designed to prevent the potential infinite loop issue caused
by the combination of tail calls and freplace, ensuring the correct
behavior and stability of the system.
Additionally, fix the broken tailcalls/tailcall_freplace selftest
because an extension prog should not be tailcalled.
cd tools/testing/selftests/bpf; ./test_progs -t tailcalls
337/25 tailcalls/tailcall_freplace:OK
337/26 tailcalls/tailcall_bpf2bpf_freplace:OK
337 tailcalls:OK
Summary: 1/26 PASSED, 0 SKIPPED, 0 FAILED
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20241015150207.70264-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds test cases for bpf_task_from_vpid() kfunc.
task_kfunc_from_vpid_no_null_check is used to test the case where
the return value is not checked for NULL pointer.
test_task_from_vpid_current is used to test obtaining the
struct task_struct of the process in the pid namespace based on vpid.
test_task_from_vpid_invalid is used to test the case of invalid vpid.
test_task_from_vpid_current and test_task_from_vpid_invalid will run
in the new namespace.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Link: https://lore.kernel.org/r/AM6PR03MB5848F13435CD650AC4B7BD7099442@AM6PR03MB5848.eurprd03.prod.outlook.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test traverses all slab caches using the kmem_cache_iter and save
the data into slab_result array map. And check if current task's
pointer is from "task_struct" slab cache using bpf_get_kmem_cache().
Also compare the result array with /proc/slabinfo if available (when
CONFIG_SLUB_DEBUG is on). Note that many of the fields in the slabinfo
are transient, so it only compares the name and objsize fields.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241010232505.1339892-4-namhyung@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test for unsigned ranges after signed extension instruction. This
case isn't currently covered by existing tests in verifier_movsx.c.
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Dimitar Kanaliev <dimitar.kanaliev@siteground.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241014121155.92887-4-dimitar.kanaliev@siteground.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add test that checks whether unsigned ranges deduced by the verifier for
sign extension instruction is correct. Without previous patch that
fixes truncation in coerce_reg_to_size_sx() this test fails.
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Dimitar Kanaliev <dimitar.kanaliev@siteground.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241014121155.92887-3-dimitar.kanaliev@siteground.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZw1/jBUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISIO/ZwEAuAVkRgyuC0njVV9PyT7EbZqxHjY+
10v6I6XR8vWmILABALrTIR9wTOyBVgmZzW7AUq8wiFv9FSZmhJfp1KxPdNYA
=L6hT
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-10-14
The following pull-request contains BPF updates for your *net-next* tree.
We've added 21 non-merge commits during the last 18 day(s) which contain
a total of 21 files changed, 1185 insertions(+), 127 deletions(-).
The main changes are:
1) Put xsk sockets on a struct diet and add various cleanups. Overall, this helps
to bump performance by 12% for some workloads, from Maciej Fijalkowski.
2) Extend BPF selftests to increase coverage of XDP features in combination
with BPF cpumap, from Alexis Lothoré (eBPF Foundation).
3) Extend netkit with an option to delegate skb->{mark,priority} scrubbing to
its BPF program, from Daniel Borkmann.
4) Make the bpf_get_netns_cookie() helper available also to tc(x) BPF programs,
from Mahe Tardy.
5) Extend BPF selftests covering a BPF program setting socket options per MPTCP
subflow, from Geliang Tang and Nicolas Rybowski.
bpf-next-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (21 commits)
xsk: Use xsk_buff_pool directly for cq functions
xsk: Wrap duplicated code to function
xsk: Carry a copy of xdp_zc_max_segs within xsk_buff_pool
xsk: Get rid of xdp_buff_xsk::orig_addr
xsk: s/free_list_node/list_node/
xsk: Get rid of xdp_buff_xsk::xskb_list_node
selftests/bpf: check program redirect in xdp_cpumap_attach
selftests/bpf: make xdp_cpumap_attach keep redirect prog attached
selftests/bpf: fix bpf_map_redirect call for cpu map test
selftests/bpf: add tcx netns cookie tests
bpf: add get_netns_cookie helper to tc programs
selftests/bpf: add missing header include for htons
selftests/bpf: Extend netkit tests to validate skb meta data
tools: Sync if_link.h uapi tooling header
netkit: Add add netkit scrub support to rt_link.yaml
netkit: Simplify netkit mode over to use NLA_POLICY_MAX
netkit: Add option for scrubbing skb meta data
bpf: Remove unused macro
selftests/bpf: Add mptcp subflow subtest
selftests/bpf: Add getsockopt to inspect mptcp subflow
...
====================
Link: https://patch.msgid.link/20241014211110.16562-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a subprogram to BPF object file that otherwise has no entry BPF
programs to validate that libbpf can still load this correctly.
Until this was fixed, user could expect this very confusing error message:
libbpf: prog 'dangling_subprog': missing BPF prog type, check ELF section name '.text'
libbpf: prog 'dangling_subprog': failed to load: -22
libbpf: failed to load object 'struct_ops_detach'
libbpf: failed to load BPF skeleton 'struct_ops_detach': -22
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241010211731.4121837-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch continues the migration and removal process for cgroup
sock_create tests to selftests.
The test being migrated verifies the ability of cgroup BPF to block the
creation of specific types of sockets using a verdict. Specifically, the
test denies socket creation when the socket is of type AF_INET{6},
SOCK_DGRAM, and IPPROTO_ICMP{V6}. If the requested socket type matches
these attributes, the cgroup BPF verdict blocks the socket creation.
As with the previous commit, this test currently lacks coverage in
selftests, so this patch migrates the functionality into the sock_create
tests under selftests. This migration ensures that the socket creation
blocking behavior with cgroup bpf program is properly tested within the
selftest framework.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20241011044847.51584-3-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch migrates the old test for cgroup BPF that sets
sk_bound_dev_if, mark, and priority when AF_INET{6} sockets are created.
The most closely related tests under selftests are 'test_sock' and
'sockopt'. However, these existing tests serve different purposes.
'test_sock' focuses mainly on verifying the socket binding process,
while 'sockopt' concentrates on testing the behavior of getsockopt and
setsockopt operations for various socket options.
Neither of these existing tests directly covers the ability of cgroup
BPF to set socket attributes such as sk_bound_dev_if, mark, and priority
during socket creation. To address this gap, this patch introduces a
migration of the old cgroup socket attribute test, now included as the
'sock_create' test in selftests/bpf. This ensures that the ability to
configure these attributes during socket creation is properly tested.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20241011044847.51584-2-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Removed unnecessary `fd = -1` assignments after closing file descriptors.
because it will be assigned by the function bpf_prog_load().This improves
code readability and removes redundant operations.
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241010055737.4292-1-zhujun2@cmss.chinamobile.com
Add assertions in `bpf_link_info.uprobe_multi` test to verify that
`count` and `path_size` fields are correctly populated when the fields
are unset.
This tests a previous bug where the `path_size` field was not populated
when `path` and `path_size` were unset.
Signed-off-by: Tyrone Wu <wudevelops@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241011000803.681190-2-wudevelops@gmail.com
Linking of urandom_read and liburandom_read.so prefers LLVM's 'ld.lld' but
falls back to using 'ld' if unsupported. However, this fallback discards
any existing makefile macro for LD and can break cross-compilation.
Fix by changing the fallback to use the target linker $(LD), passed via
'-fuse-ld=' using an absolute path rather than a linker "flavour".
Fixes: 08c79c9cd6 ("selftests/bpf: Don't force lld on non-x86 architectures")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241009040720.635260-1-tony.ambardar@gmail.com
xdp_cpumap_attach, in its current form, only checks that an xdp cpumap
program can be executed, but not that it performs correctly the cpu
redirect as configured by userspace (bpf_prog_test_run_opts will return
success even if the redirect program returns an error)
Add a check to ensure that the program performs the configured redirect
as well. The check is based on a global variable incremented by a
chained program executed only if the redirect program properly executes.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241009-convert_xdp_tests-v3-3-51cea913710c@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Current test only checks attach/detach on cpu map type program, and so
does not check that it can be properly executed, neither that it
redirects correctly.
Update the existing test to extend its coverage:
- keep the redirected program loaded
- try to execute it through bpf_prog_test_run_opts with some dummy
context
While at it, bring the following minor improvements:
- isolate test interface in its own namespace
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241009-convert_xdp_tests-v3-2-51cea913710c@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
xdp_redir_prog currently redirects packets based on the entry at index 1
in cpu_map, but the corresponding test only manipulates the entry at
index 0. This does not really affect the test in its current form since
the program is detached before having the opportunity to execute, but it
needs to be fixed before being able improve the corresponding test (ie,
not only test attach/detach but also the redirect feature)
Fix this XDP program by making it redirect packets based on entry 0 in
cpu_map instead of entry 1.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241009-convert_xdp_tests-v3-1-51cea913710c@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add a test case for kfuncs from multiple external modules, checking
that the correct kfuncs are called regardless of which order they're
called in. Specifically, check that calling the kfuncs in an order
different from the one the modules' BTF are loaded in works.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20241010-fix-kfunc-btf-caching-for-modules-v2-3-745af6c1af98@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Generalize the previous [un]load_bpf_testmod() helpers (in
testing_helpers.c) to the more generic [un]load_module(), which can
load an arbitrary kernel module by name. This allows future selftests
to more easily load custom kernel modules other than bpf_testmod.ko.
Refactor [un]load_bpf_testmod() to wrap this new helper.
Signed-off-by: Simon Sundberg <simon.sundberg@kau.se>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20241010-fix-kfunc-btf-caching-for-modules-v2-2-745af6c1af98@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Existing code calls connect() with a 'struct sockaddr_in6 *' argument
where a 'struct sockaddr *' argument is declared, yielding compile errors
when building for mips64el/musl-libc:
In file included from cgroup_ancestor.c:3:
cgroup_ancestor.c: In function 'send_datagram':
cgroup_ancestor.c:38:38: error: passing argument 2 of 'connect' from incompatible pointer type [-Werror=incompatible-pointer-types]
38 | if (!ASSERT_OK(connect(sock, &addr, sizeof(addr)), "connect")) {
| ^~~~~
| |
| struct sockaddr_in6 *
./test_progs.h:343:29: note: in definition of macro 'ASSERT_OK'
343 | long long ___res = (res); \
| ^~~
In file included from .../netinet/in.h:10,
from .../arpa/inet.h:9,
from ./test_progs.h:17:
.../sys/socket.h:386:19: note: expected 'const struct sockaddr *' but argument is of type 'struct sockaddr_in6 *'
386 | int connect (int, const struct sockaddr *, socklen_t);
| ^~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
This only compiles because of a glibc extension allowing declaration of the
argument as a "transparent union" which includes both types above.
Explicitly cast the argument to allow compiling for both musl and glibc.
Cc: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Fixes: f957c230e1 ("selftests/bpf: convert test_skb_cgroup_id_user to test_progs")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241008231232.634047-1-tony.ambardar@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add three success test cases to test the flattening of array of nested
struct. For these three tests, the number of special fields in map is
BTF_FIELDS_MAX, but the array is defined in structs with different
nested level.
Add one failure test case for the flattening as well. In the test case,
the number of special fields in map is BTF_FIELDS_MAX + 1. It will make
btf_parse_fields() in map_create() return -E2BIG, the creation of map
will succeed, but the load of program will fail because the btf_record
is invalid for the map.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241008071114.3718177-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add netns cookie test that verifies the helper is now supported and work
in the context of tc programs.
Signed-off-by: Mahe Tardy <mahe.tardy@gmail.com>
Link: https://lore.kernel.org/r/20241007095958.97442-2-mahe.tardy@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Including the network_helpers.h header in tests can lead to the following
build error:
./network_helpers.h: In function ‘csum_tcpudp_magic’:
./network_helpers.h:116:14: error: implicit declaration of function \
‘htons’ [-Werror=implicit-function-declaration]
116 | s += htons(proto + len);
The error is avoided in many cases thanks to some other headers included
earlier and bringing in arpa/inet.h (ie: test_progs.h).
Make sure that test_progs build success does not depend on header ordering
by adding the missing header include in network_helpers.h
Fixes: f6642de0c3 ("selftests/bpf: Add csum helpers")
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241008-network_helpers_fix-v1-1-2c2ae03df7ef@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
test_progs uses glibc specific functions backtrace() and
backtrace_symbols_fd() to print backtrace in case of SIGSEGV.
Recent commit (see fixes) updated test_progs.c to define stub versions
of the same functions with attriubte "weak" in order to allow linking
test_progs against musl libc. Unfortunately this broke the backtrace
handling for glibc builds.
As it turns out, glibc defines backtrace() and backtrace_symbols_fd()
as weak:
$ llvm-readelf --symbols /lib64/libc.so.6 \
| grep -P '( backtrace_symbols_fd| backtrace)$'
4910: 0000000000126b40 161 FUNC WEAK DEFAULT 16 backtrace
6843: 0000000000126f90 852 FUNC WEAK DEFAULT 16 backtrace_symbols_fd
So does test_progs:
$ llvm-readelf --symbols test_progs \
| grep -P '( backtrace_symbols_fd| backtrace)$'
2891: 00000000006ad190 15 FUNC WEAK DEFAULT 13 backtrace
11215: 00000000006ad1a0 41 FUNC WEAK DEFAULT 13 backtrace_symbols_fd
In such situation dynamic linker is not obliged to favour glibc
implementation over the one defined in test_progs.
Compiling with the following simple modification to test_progs.c
demonstrates the issue:
$ git diff
...
\--- a/tools/testing/selftests/bpf/test_progs.c
\+++ b/tools/testing/selftests/bpf/test_progs.c
\@@ -1817,6 +1817,7 @@ int main(int argc, char **argv)
if (err)
return err;
+ *(int *)0xdeadbeef = 42;
err = cd_flavor_subdir(argv[0]);
if (err)
return err;
$ ./test_progs
[0]: Caught signal #11!
Stack trace:
<backtrace not supported>
Segmentation fault (core dumped)
Resolve this by hiding stub definitions behind __GLIBC__ macro check
instead of using "weak" attribute.
Fixes: c9a83e76b5 ("selftests/bpf: Fix compile if backtrace support missing in libc")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Tony Ambardar <tony.ambardar@gmail.com>
Reviewed-by: Tony Ambardar <tony.ambardar@gmail.com>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/bpf/20241003210307.3847907-1-eddyz87@gmail.com
Previously when multiple BPF object files referencing the same extern
function (usually kfunc) are statically linked using `bpftool gen
object`, libbpf tries to get the nonexistent size of BTF_KIND_FUNC_PROTO
and fails. This test ensures it is fixed.
Signed-off-by: Eric Long <i@hack3r.moe>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241002-libbpf-dup-extern-funcs-v4-2-560eb460ff90@hack3r.moe
The prog_tests programs do not include the per-arch tools include
path, e.g. tools/arch/riscv/include. Some architectures depend those
files to build properly.
Include tools/arch/$(SUBARCH)/include in the selftests bpf build.
Fixes: 6d74d178fe ("tools: Add riscv barrier implementation")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240927131355.350918-2-bjorn@kernel.org
Production BPF programs are increasing in number of instructions and states
to the point, where optimising verification process for them is necessary
to avoid running into instruction limit. Authors of those BPF programs
need to analyze verifier output, for example, collecting the most
frequent source code lines to understand which part of the program has
the biggest verification cost.
This patch introduces `--top-src-lines` flag in veristat.
`--top-src-lines=N` makes veristat output N the most popular sorce code
lines, parsed from verification log.
An example of output:
```
sudo ./veristat --top-src-lines=2 bpf_flow.bpf.o
Processing 'bpf_flow.bpf.o'...
Top source lines (_dissect):
4: (bpf_helpers.h:161) asm volatile("r1 = %[ctx]\n\t"
4: (bpf_flow.c:155) if (iph && iph->ihl == 5 &&
...
```
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240930231522.58650-1-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Update Makefile build rules to compile BPF programs with target endianness
rather than host byte-order. With recent changes, this allows building the
full selftests/bpf suite hosted on x86_64 and targeting s390x or mips64eb
for example.
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/880ccc6342cfc4d3c48b44f581e87adfbce2876e.1726475448.git.tony.ambardar@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When building selftests, the following was seen:
uprobe_multi.c: In function ‘trigger_uprobe’:
uprobe_multi.c:108:40: error: ‘MADV_PAGEOUT’ undeclared (first use in this function)
108 | madvise(addr, page_sz, MADV_PAGEOUT);
| ^~~~~~~~~~~~
uprobe_multi.c:108:40: note: each undeclared identifier is reported only once for each function it appears in
make: *** [Makefile:850: bpf-next/tools/testing/selftests/bpf/uprobe_multi] Error 1
...even with updated UAPI headers. It seems the above value is
defined in UAPI <linux/mman.h> but including that file triggers
other redefinition errors. Simplest solution is to add a
guarded definition, as was done for MADV_POPULATE_READ.
Fixes: 3c217a1820 ("selftests/bpf: add build ID tests")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240926144948.172090-1-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
danobi/vmtest is going to migrate from using 9p to using virtio_fs to
mount the local rootfs: https://github.com/danobi/vmtest/pull/88
BPF CI uses danobi/vmtest to run bpf selftests and will need to support
VIRTIO_FS.
This change enables new kconfigs to be able to support the upcoming
danobi/vmtest.
Tested by building a new kernel with those config and confirming it
would successfully run with 9p (currently what is used by vmtest), and
with virtio_fs (using a local build of vmtest).
$ vmtest -k arch/x86/boot/bzImage "findmnt /"
=> bzImage
===> Booting
===> Setting up VM
===> Running command
TARGET SOURCE FSTYPE OPTIONS
/ /dev/root 9p rw,relatime,cache=5,access=client,msize=512000,trans=virtio
$ /home/chantra/local/danobi-vmtest/target/debug/vmtest -k arch/x86/boot/bzImage "findmnt /"
=> bzImage
===> Initializing host environment
===> Booting
===> Setting up VM
===> Running command
TARGET SOURCE FSTYPE OPTIONS
/ rootfs virtiofs rw,relatime
Changes in v2:
* Sorted configs alphabetically
Signed-off-by: Manu Bretelle <chantr4@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/bpf/20240925002210.501266-1-chantr4@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is no va_end after va_copy, just add it.
Signed-off-by: Zhang Jiao <zhangjiao2@cmss.chinamobile.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240924045534.8672-1-zhangjiao2@cmss.chinamobile.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Let's bail out from consumer test after we hit first fail,
so we don't pollute the log with many instances with possibly
the same error.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With newly merged code the uprobe behaviour is slightly different
and affects uprobe consumer test.
We no longer need to check if the uprobe object is still preserved
after removing last uretprobe, because it stays as long as there's
pending/installed uretprobe instance.
This allows to run uretprobe consumers registered 'after' uprobe was
hit even if previous uretprobe got unregistered before being hit.
The uprobe object will be now removed after the last uprobe ref is
released and in such case it's held by ri->uprobe (return instance)
which is released after the uretprobe is hit.
Reported-by: Ihor Solodrai <ihor.solodrai@pm.me>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Ihor Solodrai <ihor.solodrai@pm.me>
Closes: https://lore.kernel.org/bpf/w6U8Z9fdhjnkSp2UaFaV1fGqJXvfLEtDKEUyGDkwmoruDJ_AgF_c0FFhrkeKW18OqiP-05s9yDKiT6X-Ns-avN_ABf0dcUkXqbSJN1TQSXo=@pm.me/
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Auto-dependencies generated for %.test.o files refer to skels using
filenames as opposed to full paths. This requires make to be able to
link this name to an actual path, because not all generated skels are
put in the working directory.
In the original patch [1], this was mitigated by this target:
$(notdir %.skel.h): $(TRUNNER_OUTPUT)/%.skel.h
@true
This turned out to be insufficient.
First, %.lskel.h and %.subskel.h were missed, because a typical
selftests/bpf build could find these files in the working directory.
This error was detected by an out-of-tree build [2].
Second, even with missing rules added, this target causes unnecessary
rebuilds in the out-of-tree case, as X.skel.h is searched for in the
working directory, and not in the $(OUTPUT).
Using vpath directive [3] is a better solution. Instead of introducing
a separate target (X.skel.h in addition to $(TRUNNER_OUTPUT)/X.skel.h),
make is instructed to search for skels in the output, which allows make
to correctly detect that skel has already been generated.
[1]: https://lore.kernel.org/bpf/VJihUTnvtwEgv_mOnpfy7EgD9D2MPNoHO-MlANeLIzLJPGhDeyOuGKIYyKgk0O6KPjfM-MuhtvPwZcngN8WFqbTnTRyCSMc2aMZ1ODm1T_g=@pm.me/
[2]: https://lore.kernel.org/bpf/CIjrhJwoIqMc2IhuppVqh4ZtJGbx8kC8rc9PHhAIU6RccnWT4I04F_EIr4GxQwxZe89McuGJlCnUk9UbkdvWtSJjAsd7mHmnTy9F8K2TLZM=@pm.me/
[3]: https://www.gnu.org/software/make/manual/html_node/Selective-Search.html
Reported-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/bpf/20240916195919.1872371-2-ihor.solodrai@pm.me
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
The current xdp_devmap_attach test attaches a program
that redirects to another program via devmap.
It is, however, never executed, so do that to catch
any bugs that might occur during execution.
Also, execute the same for a veth pair so that we
also cover the non-generic path.
Warning: Running this without the bugfix in this series
will likely crash your system.
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20240911-devel-koalo-fix-ingress-ifindex-v4-2-5c643ae10258@linutronix.de
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This test was added because of a bug in verifier.c:sync_linked_regs(),
upon range propagation it destroyed subreg_def marks for registers.
The test is written in a way to return an upper half of a register
that is affected by range propagation and must have it's subreg_def
preserved. This gives a return value of 0 and leads to undefined
return value if subreg_def mark is not preserved.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240924210844.1758441-2-eddyz87@gmail.com
This patch adds a subtest named test_subflow in test_mptcp to load and
verify the newly added MPTCP subflow BPF program. To goal is to make
sure it is possible to set different socket options per subflows, while
the userspace socket interface only lets the application to set the same
socket options for the whole MPTCP connection and its multiple subflows.
To check that, a client and a server are started in a dedicated netns,
with veth interfaces to simulate multiple paths. They will exchange data
to allow the creation of an additional subflow.
When the different subflows are being created, the new MPTCP subflow BPF
program will set some socket options: marks and TCP CC. The validation
is done by the same program, when the userspace checks the value of the
modified socket options. On the userspace side, it will see that the
default values are still being used on the MPTCP connection, while the
BPF program will see different options set per subflow of the same MPTCP
connection.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/76
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240926-upstream-bpf-next-20240506-mptcp-subflow-test-v7-3-d26029e15cdd@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch adds a "cgroup/getsockopt" way to inspect the subflows of an
MPTCP socket, and verify the modifications done by the same BPF program
in the previous commit: a different mark per subflow, and a different
TCP CC set on the second one. This new hook will be used by the next
commit to verify the socket options set on each subflow.
This extra "cgroup/getsockopt" prog walks the msk->conn_list and use
bpf_core_cast to cast a pointer for readonly. It allows to inspect all
the fields of a structure.
Note that on the kernel side, the MPTCP socket stores a list of subflows
under 'msk->conn_list'. They can be iterated using the generic 'list'
helpers. They have been imported here, with a small difference:
list_for_each_entry() uses 'can_loop' to limit the number of iterations,
and ease its use. Because only data need to be read here, it is enough
to use this technique. It is planned to use bpf_iter, when BPF programs
will be used to modify data from the different subflows.
mptcp_subflow_tcp_sock() and mptcp_for_each_stubflow() helpers have also
be imported.
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240926-upstream-bpf-next-20240506-mptcp-subflow-test-v7-2-d26029e15cdd@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Move Nicolas' patch into bpf selftests directory. This example adds a
different mark (SO_MARK) on each subflow, and changes the TCP CC only on
the first subflow.
From the userspace, an application can do a setsockopt() on an MPTCP
socket, and typically the same value will be propagated to all subflows
(paths). If someone wants to have different values per subflow, the
recommended way is to use BPF. So it is good to add such example here,
and make sure there is no regressions.
This example shows how it is possible to:
Identify the parent msk of an MPTCP subflow.
Put different sockopt for each subflow of a same MPTCP connection.
Here especially, two different behaviours are implemented:
A socket mark (SOL_SOCKET SO_MARK) is put on each subflow of a same
MPTCP connection. The order of creation of the current subflow defines
its mark. The TCP CC algorithm of the very first subflow of an MPTCP
connection is set to "reno".
This is just to show it is possible to identify an MPTCP connection, and
set socket options, from different SOL levels, per subflow. "reno" has
been picked because it is built-in and usually not set as default one.
It is easy to verify with 'ss' that these modifications have been
applied correctly. That's what the next patch is going to do.
Nicolas' code comes from:
commit 4d120186e4d6 ("bpf:examples: update mptcp_set_mark_kern.c")
from the MPTCP repo https://github.com/multipath-tcp/mptcp_net-next (the
"scripts" branch), and it has been adapted by Geliang.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/76
Co-developed-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Nicolas Rybowski <nicolas.rybowski@tessares.net>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240926-upstream-bpf-next-20240506-mptcp-subflow-test-v7-1-d26029e15cdd@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
-----BEGIN PGP SIGNATURE-----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=MDwh
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Introduce '__attribute__((bpf_fastcall))' for helpers and kfuncs with
corresponding support in LLVM.
It is similar to existing 'no_caller_saved_registers' attribute in
GCC/LLVM with a provision for backward compatibility. It allows
compilers generate more efficient BPF code assuming the verifier or
JITs will inline or partially inline a helper/kfunc with such
attribute. bpf_cast_to_kern_ctx, bpf_rdonly_cast,
bpf_get_smp_processor_id are the first set of such helpers.
- Harden and extend ELF build ID parsing logic.
When called from sleepable context the relevants parts of ELF file
will be read to find and fetch .note.gnu.build-id information. Also
harden the logic to avoid TOCTOU, overflow, out-of-bounds problems.
- Improvements and fixes for sched-ext:
- Allow passing BPF iterators as kfunc arguments
- Make the pointer returned from iter_next method trusted
- Fix x86 JIT convergence issue due to growing/shrinking conditional
jumps in variable length encoding
- BPF_LSM related:
- Introduce few VFS kfuncs and consolidate them in
fs/bpf_fs_kfuncs.c
- Enforce correct range of return values from certain LSM hooks
- Disallow attaching to other LSM hooks
- Prerequisite work for upcoming Qdisc in BPF:
- Allow kptrs in program provided structs
- Support for gen_epilogue in verifier_ops
- Important fixes:
- Fix uprobe multi pid filter check
- Fix bpf_strtol and bpf_strtoul helpers
- Track equal scalars history on per-instruction level
- Fix tailcall hierarchy on x86 and arm64
- Fix signed division overflow to prevent INT_MIN/-1 trap on x86
- Fix get kernel stack in BPF progs attached to tracepoint:syscall
- Selftests:
- Add uprobe bench/stress tool
- Generate file dependencies to drastically improve re-build time
- Match JIT-ed and BPF asm with __xlated/__jited keywords
- Convert older tests to test_progs framework
- Add support for RISC-V
- Few fixes when BPF programs are compiled with GCC-BPF backend
(support for GCC-BPF in BPF CI is ongoing in parallel)
- Add traffic monitor
- Enable cross compile and musl libc
* tag 'bpf-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (260 commits)
btf: require pahole 1.21+ for DEBUG_INFO_BTF with default DWARF version
btf: move pahole check in scripts/link-vmlinux.sh to lib/Kconfig.debug
btf: remove redundant CONFIG_BPF test in scripts/link-vmlinux.sh
bpf: Call the missed kfree() when there is no special field in btf
bpf: Call the missed btf_record_free() when map creation fails
selftests/bpf: Add a test case to write mtu result into .rodata
selftests/bpf: Add a test case to write strtol result into .rodata
selftests/bpf: Rename ARG_PTR_TO_LONG test description
selftests/bpf: Fix ARG_PTR_TO_LONG {half-,}uninitialized test
bpf: Zero former ARG_PTR_TO_{LONG,INT} args in case of error
bpf: Improve check_raw_mode_ok test for MEM_UNINIT-tagged types
bpf: Fix helper writes to read-only maps
bpf: Remove truncation test in bpf_strtol and bpf_strtoul helpers
bpf: Fix bpf_strtol and bpf_strtoul helpers for 32bit
selftests/bpf: Add tests for sdiv/smod overflow cases
bpf: Fix a sdiv overflow issue
libbpf: Add bpf_object__token_fd accessor
docs/bpf: Add missing BPF program types to docs
docs/bpf: Add constant values for linkages
bpf: Use fake pt_regs when doing bpf syscall tracepoint tracing
...
- Implement per-PMU context rescheduling to significantly improve single-PMU
performance, and related cleanups/fixes. (by Peter Zijlstra and Namhyung Kim)
- Fix ancient bug resulting in a lot of events being dropped erroneously
at higher sampling frequencies. (by Luo Gengkun)
- uprobes enhancements:
- Implement RCU-protected hot path optimizations for better performance:
"For baseline vs SRCU, peak througput increased from 3.7 M/s (million uprobe
triggerings per second) up to about 8 M/s. For uretprobes it's a bit more
modest with bump from 2.4 M/s to 5 M/s.
For SRCU vs RCU Tasks Trace, peak throughput for uprobes increases further from
8 M/s to 10.3 M/s (+28%!), and for uretprobes from 5.3 M/s to 5.8 M/s (+11%),
as we have more work to do on uretprobes side.
Even single-thread (no contention) performance is slightly better: 3.276 M/s to
3.396 M/s (+3.5%) for uprobes, and 2.055 M/s to 2.174 M/s (+5.8%)
for uretprobes."
(by Andrii Nakryiko et al)
- Document mmap_lock, don't abuse get_user_pages_remote(). (by Oleg Nesterov)
- Cleanups & fixes to prepare for future work:
- Remove uprobe_register_refctr()
- Simplify error handling for alloc_uprobe()
- Make uprobe_register() return struct uprobe *
- Fold __uprobe_unregister() into uprobe_unregister()
- Shift put_uprobe() from delete_uprobe() to uprobe_unregister()
- BPF: Fix use-after-free in bpf_uprobe_multi_link_attach()
(by Oleg Nesterov)
- New feature & ABI extension: allow events to use PERF_SAMPLE READ with
inheritance, enabling sample based profiling of a group of counters over
a hierarchy of processes or threads. (by Ben Gainey)
- Intel uncore & power events updates:
- Add Arrow Lake and Lunar Lake support
- Add PERF_EV_CAP_READ_SCOPE
- Clean up and enhance cpumask and hotplug support
(by Kan Liang)
- Add LNL uncore iMC freerunning support
- Use D0:F0 as a default device
(by Zhenyu Wang)
- Intel PT: fix AUX snapshot handling race. (by Adrian Hunter)
- Misc fixes and cleanups. (by James Clark, Jiri Olsa, Oleg Nesterov and Peter Zijlstra)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=E3s3
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2024-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
- Implement per-PMU context rescheduling to significantly improve
single-PMU performance, and related cleanups/fixes (Peter Zijlstra
and Namhyung Kim)
- Fix ancient bug resulting in a lot of events being dropped
erroneously at higher sampling frequencies (Luo Gengkun)
- uprobes enhancements:
- Implement RCU-protected hot path optimizations for better
performance:
"For baseline vs SRCU, peak througput increased from 3.7 M/s
(million uprobe triggerings per second) up to about 8 M/s. For
uretprobes it's a bit more modest with bump from 2.4 M/s to
5 M/s.
For SRCU vs RCU Tasks Trace, peak throughput for uprobes
increases further from 8 M/s to 10.3 M/s (+28%!), and for
uretprobes from 5.3 M/s to 5.8 M/s (+11%), as we have more
work to do on uretprobes side.
Even single-thread (no contention) performance is slightly
better: 3.276 M/s to 3.396 M/s (+3.5%) for uprobes, and 2.055
M/s to 2.174 M/s (+5.8%) for uretprobes."
(Andrii Nakryiko et al)
- Document mmap_lock, don't abuse get_user_pages_remote() (Oleg
Nesterov)
- Cleanups & fixes to prepare for future work:
- Remove uprobe_register_refctr()
- Simplify error handling for alloc_uprobe()
- Make uprobe_register() return struct uprobe *
- Fold __uprobe_unregister() into uprobe_unregister()
- Shift put_uprobe() from delete_uprobe() to uprobe_unregister()
- BPF: Fix use-after-free in bpf_uprobe_multi_link_attach()
(Oleg Nesterov)
- New feature & ABI extension: allow events to use PERF_SAMPLE READ
with inheritance, enabling sample based profiling of a group of
counters over a hierarchy of processes or threads (Ben Gainey)
- Intel uncore & power events updates:
- Add Arrow Lake and Lunar Lake support
- Add PERF_EV_CAP_READ_SCOPE
- Clean up and enhance cpumask and hotplug support
(Kan Liang)
- Add LNL uncore iMC freerunning support
- Use D0:F0 as a default device
(Zhenyu Wang)
- Intel PT: fix AUX snapshot handling race (Adrian Hunter)
- Misc fixes and cleanups (James Clark, Jiri Olsa, Oleg Nesterov and
Peter Zijlstra)
* tag 'perf-core-2024-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
dmaengine: idxd: Clean up cpumask and hotplug for perfmon
iommu/vt-d: Clean up cpumask and hotplug for perfmon
perf/x86/intel/cstate: Clean up cpumask and hotplug
perf: Add PERF_EV_CAP_READ_SCOPE
perf: Generic hotplug support for a PMU with a scope
uprobes: perform lockless SRCU-protected uprobes_tree lookup
rbtree: provide rb_find_rcu() / rb_find_add_rcu()
perf/uprobe: split uprobe_unregister()
uprobes: travers uprobe's consumer list locklessly under SRCU protection
uprobes: get rid of enum uprobe_filter_ctx in uprobe filter callbacks
uprobes: protected uprobe lifetime with SRCU
uprobes: revamp uprobe refcounting and lifetime management
bpf: Fix use-after-free in bpf_uprobe_multi_link_attach()
perf/core: Fix small negative period being ignored
perf: Really fix event_function_call() locking
perf: Optimize __pmu_ctx_sched_out()
perf: Add context time freeze
perf: Fix event_function_call() locking
perf: Extract a few helpers
perf: Optimize context reschedule for single PMU cases
...
Add a test which attempts to call bpf_check_mtu() and writes the MTU
into .rodata section of the BPF program, and for comparison this adds
test cases also for .bss and .data section again. The bpf_check_mtu()
is a bit more special in that the passed mtu argument is read and
written by the helper (instead of just written to). Assert that writes
into .rodata remain rejected by the verifier.
# ./vmtest.sh -- ./test_progs -t verifier_const
[...]
./test_progs -t verifier_const
[ 1.657367] bpf_testmod: loading out-of-tree module taints kernel.
[ 1.657773] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
#473/1 verifier_const/rodata/strtol: write rejected:OK
#473/2 verifier_const/bss/strtol: write accepted:OK
#473/3 verifier_const/data/strtol: write accepted:OK
#473/4 verifier_const/rodata/mtu: write rejected:OK
#473/5 verifier_const/bss/mtu: write accepted:OK
#473/6 verifier_const/data/mtu: write accepted:OK
#473 verifier_const:OK
[...]
Summary: 2/10 PASSED, 0 SKIPPED, 0 FAILED
For comparison, without the MEM_UNINIT on bpf_check_mtu's proto:
# ./vmtest.sh -- ./test_progs -t verifier_const
[...]
#473/3 verifier_const/data/strtol: write accepted:OK
run_subtest:PASS:obj_open_mem 0 nsec
run_subtest:FAIL:unexpected_load_success unexpected success: 0
#473/4 verifier_const/rodata/mtu: write rejected:FAIL
#473/5 verifier_const/bss/mtu: write accepted:OK
#473/6 verifier_const/data/mtu: write accepted:OK
#473 verifier_const:FAIL
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20240913191754.13290-9-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The assumption of 'in privileged mode reads from uninitialized stack locations
are permitted' is not quite correct since the verifier was probing for read
access rather than write access. Both tests need to be annotated as __success
for privileged and unprivileged.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240913191754.13290-6-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Subtests are added to exercise the patched code which handles
- LLONG_MIN/-1
- INT_MIN/-1
- LLONG_MIN%-1
- INT_MIN%-1
where -1 could be an immediate or in a register.
Without the previous patch, all these cases will crash the kernel on
x86_64 platform.
Additional tests are added to use small values (e.g. -5/-1, 5%-1, etc.)
in order to exercise the additional logic with patched insns.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240913150332.1188102-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZuH9UQAKCRDbK58LschI
g0/zAP99WOcCBp1M/jSTUOba230+eiol7l5RirDEA6wu7TqY2QEAuvMG0KfCCpTI
I0WqStrK1QMbhwKPodJC1k+17jArKgw=
=jfMU
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-09-11
We've added 12 non-merge commits during the last 16 day(s) which contain
a total of 20 files changed, 228 insertions(+), 30 deletions(-).
There's a minor merge conflict in drivers/net/netkit.c:
00d066a4d4 ("netdev_features: convert NETIF_F_LLTX to dev->lltx")
d966087948 ("netkit: Disable netpoll support")
The main changes are:
1) Enable bpf_dynptr_from_skb for tp_btf such that this can be used
to easily parse skbs in BPF programs attached to tracepoints,
from Philo Lu.
2) Add a cond_resched() point in BPF's sock_hash_free() as there have
been several syzbot soft lockup reports recently, from Eric Dumazet.
3) Fix xsk_buff_can_alloc() to account for queue_empty_descs which
got noticed when zero copy ice driver started to use it,
from Maciej Fijalkowski.
4) Move the xdp:xdp_cpumap_kthread tracepoint before cpumap pushes skbs
up via netif_receive_skb_list() to better measure latencies,
from Daniel Xu.
5) Follow-up to disable netpoll support from netkit, from Daniel Borkmann.
6) Improve xsk selftests to not assume a fixed MAX_SKB_FRAGS of 17 but
instead gather the actual value via /proc/sys/net/core/max_skb_frags,
also from Maciej Fijalkowski.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
sock_map: Add a cond_resched() in sock_hash_free()
selftests/bpf: Expand skb dynptr selftests for tp_btf
bpf: Allow bpf_dynptr_from_skb() for tp_btf
tcp: Use skb__nullable in trace_tcp_send_reset
selftests/bpf: Add test for __nullable suffix in tp_btf
bpf: Support __nullable argument suffix for tp_btf
bpf, cpumap: Move xdp:xdp_cpumap_kthread tracepoint before rcv
selftests/xsk: Read current MAX_SKB_FRAGS from sysctl knob
xsk: Bump xsk_queue::queue_empty_descs in xp_can_alloc()
tcp_bpf: Remove an unused parameter for bpf_tcp_ingress()
bpf, sockmap: Correct spelling skmsg.c
netkit: Disable netpoll support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://patch.msgid.link/20240911211525.13834-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts (sort of) and no adjacent changes.
This merge reverts commit b3c9e65eb2 ("net: hsr: remove seqnr_lock")
from net, as it was superseded by
commit 430d67bdcb ("net: hsr: Use the seqnr lock for frames received via interlink port.")
in net-next.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test case checks the errno message when percpu map value size
exceeds PCPU_MIN_UNIT_SIZE.
root@debian:~# ./test_maps
...
test_map_percpu_stats_hash_of_maps:PASS
test_map_percpu_stats_map_value_size:PASS
test_sk_storage_map:PASS
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Tao Chen <chen.dylane@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240910144111.1464912-3-chen.dylane@gmail.com
llvm change [1] made a change such that __sync_fetch_and_{and,or,xor}()
will generate atomic_fetch_*() insns even if the return value is not used.
This is a deliberate choice to make sure barrier semantics are preserved
from source code to asm insn.
But the change in [1] caused arena_atomics selftest failure.
test_arena_atomics:PASS:arena atomics skeleton open 0 nsec
libbpf: prog 'and': BPF program load failed: Permission denied
libbpf: prog 'and': -- BEGIN PROG LOAD LOG --
arg#0 reference type('UNKNOWN ') size cannot be determined: -22
0: R1=ctx() R10=fp0
; if (pid != (bpf_get_current_pid_tgid() >> 32)) @ arena_atomics.c:87
0: (18) r1 = 0xffffc90000064000 ; R1_w=map_value(map=arena_at.bss,ks=4,vs=4)
2: (61) r6 = *(u32 *)(r1 +0) ; R1_w=map_value(map=arena_at.bss,ks=4,vs=4) R6_w=scalar(smin=0,smax=umax=0xffffffff,v
ar_off=(0x0; 0xffffffff))
3: (85) call bpf_get_current_pid_tgid#14 ; R0_w=scalar()
4: (77) r0 >>= 32 ; R0_w=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff))
5: (5d) if r0 != r6 goto pc+11 ; R0_w=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff)) R6_w=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0x)
; __sync_fetch_and_and(&and64_value, 0x011ull << 32); @ arena_atomics.c:91
6: (18) r1 = 0x100000000060 ; R1_w=scalar()
8: (bf) r1 = addr_space_cast(r1, 0, 1) ; R1_w=arena
9: (18) r2 = 0x1100000000 ; R2_w=0x1100000000
11: (db) r2 = atomic64_fetch_and((u64 *)(r1 +0), r2)
BPF_ATOMIC stores into R1 arena is not allowed
processed 9 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
-- END PROG LOAD LOG --
libbpf: prog 'and': failed to load: -13
libbpf: failed to load object 'arena_atomics'
libbpf: failed to load BPF skeleton 'arena_atomics': -13
test_arena_atomics:FAIL:arena atomics skeleton load unexpected error: -13 (errno 13)
#3 arena_atomics:FAIL
The reason of the failure is due to [2] where atomic{64,}_fetch_{and,or,xor}() are not
allowed by arena addresses.
Version 2 of the patch fixed the issue by using inline asm ([3]). But further discussion
suggested to find a way from source to generate locked insn which is more user
friendly. So in not-merged llvm patch ([4]), if relax memory ordering is used and
the return value is not used, locked insn could be generated.
So with llvm patch [4] to compile the bpf selftest, the following code
__c11_atomic_fetch_and(&and64_value, 0x011ull << 32, memory_order_relaxed);
is able to generate locked insn, hence fixing the selftest failure.
[1] https://github.com/llvm/llvm-project/pull/106494
[2] d503a04f8b ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
[3] https://lore.kernel.org/bpf/20240803025928.4184433-1-yonghong.song@linux.dev/
[4] https://github.com/llvm/llvm-project/pull/107343
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240909223431.1666305-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new set of tests validating behavior of capturing stack traces
with build ID. We extend uprobe_multi target binary with ability to
trigger uprobe (so that we can capture stack traces from it), but also
we allow to force build ID data to be either resident or non-resident in
memory (see also a comment about quirks of MADV_PAGEOUT).
That way we can validate that in non-sleepable context we won't get
build ID (as expected), but with sleepable uprobes we will get that
build ID regardless of it being physically present in memory.
Also, we add a small add-on linker script which reorders
.note.gnu.build-id section and puts it after (big) .text section,
putting build ID data outside of the very first page of ELF file. This
will test all the relaxations we did in build ID parsing logic in kernel
thanks to freader abstraction.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240829174232.3133883-11-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add 3 test cases for skb dynptr used in tp_btf:
- test_dynptr_skb_tp_btf: use skb dynptr in tp_btf and make sure it is
read-only.
- skb_invalid_ctx_fentry/skb_invalid_ctx_fexit: bpf_dynptr_from_skb
should fail in fentry/fexit.
In test_dynptr_skb_tp_btf, to trigger the tracepoint in kfree_skb,
test_pkt_access is used for its test_run, as in kfree_skb.c. Because the
test process is different from others, a new setup type is defined,
i.e., SETUP_SKB_PROG_TP.
The result is like:
$ ./test_progs -t 'dynptr/test_dynptr_skb_tp_btf'
#84/14 dynptr/test_dynptr_skb_tp_btf:OK
#84 dynptr:OK
#127 kfunc_dynptr_param:OK
Summary: 2/1 PASSED, 0 SKIPPED, 0 FAILED
$ ./test_progs -t 'dynptr/skb_invalid_ctx_f'
#84/85 dynptr/skb_invalid_ctx_fentry:OK
#84/86 dynptr/skb_invalid_ctx_fexit:OK
#84 dynptr:OK
#127 kfunc_dynptr_param:OK
Summary: 2/2 PASSED, 0 SKIPPED, 0 FAILED
Also fix two coding style nits (change spaces to tabs).
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240911033719.91468-6-lulie@linux.alibaba.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Currently, xskxceiver assumes that MAX_SKB_FRAGS value is always 17
which is not true - since the introduction of BIG TCP this can now take
any value between 17 to 45 via CONFIG_MAX_SKB_FRAGS.
Adjust the TOO_MANY_FRAGS test case to read the currently configured
MAX_SKB_FRAGS value by reading it from /proc/sys/net/core/max_skb_frags.
If running system does not provide that sysctl file then let us try
running the test with a default value.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240910124129.289874-1-maciej.fijalkowski@intel.com
When "arg#%d expected pointer to ctx, but got %s" error is printed, both
template parts actually point to the type of the argument, therefore, it
will also say "but got PTR", regardless of what was the actual register
type.
Fix the message to print the register type in the second part of the
template, change the existing test to adapt to the new format, and add a
new test to test the case when arg is a pointer to context, but reg is a
scalar.
Fixes: 00b85860fe ("bpf: Rewrite kfunc argument handling")
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20240909133909.1315460-1-maxim@isovalent.com
This patch adds DENYLIST.riscv64 file for riscv64. It will help BPF CI
and local vmtest to mask failing and unsupported test cases.
We can use the following command to use deny list in local vmtest as
previously mentioned by Manu.
PLATFORM=riscv64 CROSS_COMPILE=riscv64-linux-gnu- vmtest.sh \
-l ./libbpf-vmtest-rootfs-2024.08.30-noble-riscv64.tar.zst -- \
./test_progs -d \
\"$(cat tools/testing/selftests/bpf/DENYLIST.riscv64 \
| cut -d'#' -f1 \
| sed -e 's/^[[:space:]]*//' \
-e 's/[[:space:]]*$//' \
| tr -s '\n' ','\
)\"
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240905081401.1894789-9-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support cross platform testing for vmtest. The variable $ARCH in the
current script is platform semantics, not kernel semantics. Rename it to
$PLATFORM so that we can easily use $ARCH in cross-compilation. And drop
`set -u` unbound variable check as we will use CROSS_COMPILE env
variable. For now, Using PLATFORM= and CROSS_COMPILE= options will
enable cross platform testing:
PLATFORM=<platform> CROSS_COMPILE=<toolchain> vmtest.sh -- ./test_progs
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240905081401.1894789-7-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Support vmtest to use local rootfs image generated by [0] that is
consistent with BPF CI. Now we can specify the local rootfs image
through the `-l` parameter like as follows:
vmtest.sh -l ./libbpf-vmtest-rootfs-2024.08.22-noble-amd64.tar.zst -- ./test_progs
Meanwhile, some descriptions have been flushed.
Link: https://github.com/libbpf/ci/blob/main/rootfs/mkrootfs_debian.sh [0]
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240905081401.1894789-6-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The URLS array is only valid in the download_rootfs function and does
not need to be parsed globally in advance. At the same time, the logic
of loading rootfs is refactored to prepare vmtest for supporting local
rootfs.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240905081401.1894789-5-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It is not always convenient to have LLVM libraries installed inside CI
rootfs images, thus request static libraries from llvm-config.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20240905081401.1894789-4-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Recently, when compiling bpf selftests on RV64, the following
compilation failure occurred:
progs/bpf_dctcp.c:29:21: error: redefinition of 'fallback' as different kind of symbol
29 | volatile const char fallback[TCP_CA_NAME_MAX];
| ^
/workspace/tools/testing/selftests/bpf/tools/include/vmlinux.h:86812:15: note: previous definition is here
86812 | typedef u32 (*fallback)(u32, const unsigned char *, size_t);
The reason is that the `fallback` symbol has been defined in
arch/riscv/lib/crc32.c, which will cause symbol conflicts when vmlinux.h
is included in bpf_dctcp. Let we rename `fallback` string to
`fallback_cc` in bpf_dctcp to fix this compilation failure.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240905081401.1894789-3-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The $(let ...) function is only supported by GNU Make version 4.4 [0]
and above, otherwise the following exception file or directory will be
generated:
tools/testing/selftests/bpfFEATURE-DUMP.selftests
tools/testing/selftests/bpffeature/
Considering that the GNU Make version of most Linux distributions is
lower than 4.4, let us adapt the corresponding logic to it.
Link: https://lists.gnu.org/archive/html/info-gnu/2022-10/msg00008.html [0]
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240905081401.1894789-2-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The idea is to run same test as for test_pid_filter_process, but instead
of standard fork-ed process we create the process with clone(CLONE_VM..)
to make sure the thread leader process filter works properly in this case.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240905115124.1503998-5-jolsa@kernel.org
The idea is to create and monitor 3 uprobes, each trigered in separate
process and make sure the bpf program gets executed just for the proper
PID specified via pid filter.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240905115124.1503998-4-jolsa@kernel.org
With uprobe_unregister() having grown a synchronize_srcu(), it becomes
fairly slow to call. Esp. since both users of this API call it in a
loop.
Peel off the sync_srcu() and do it once, after the loop.
We also need to add uprobe_unregister_sync() into uprobe_register()'s
error handling path, as we need to be careful about returning to the
caller before we have a guarantee that partially attached consumer won't
be called anymore. This is an unlikely slow path and this should be
totally fine to be slow in the case of a failed attach.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Co-developed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240903174603.3554182-6-andrii@kernel.org
Considering that CO-RE direct read access to the first system call
argument is already available on s390 and arm64, let's enable
test_bpf_syscall_macro:syscall_arg1 on these architectures.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240831041934.1629216-4-pulehui@huaweicloud.com
The core part of the selftest, i.e., the je <-> jmp cycle, mimics the
original sched-ext bpf program. The test will fail without the
previous patch.
I tried to create some cases for other potential cycles
(je <-> je, jmp <-> je and jmp <-> jmp) with similar pattern
to the test in this patch, but failed. So this patch
only contains one test for je <-> jmp cycle.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240904221256.37389-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add selftest for cases where btf_name_valid_section() does not properly
check for certain types of names.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Link: https://lore.kernel.org/r/20240831054742.364585-1-aha310510@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
When the PROCMAP_QUERY is not defined, a compilation error occurs due to the
mismatch of the procmap_query()'s params, procmap_query() only be called in
the file where the function is defined, modify the params so they can match.
We get a warning when build samples/bpf:
trace_helpers.c:252:5: warning: no previous prototype for ‘procmap_query’ [-Wmissing-prototypes]
252 | int procmap_query(int fd, const void *addr, __u32 query_flags, size_t *start, size_t *offset, int *flags)
| ^~~~~~~~~~~~~
As this function is only used in the file, mark it as 'static'.
Fixes: 4e9e07603e ("selftests/bpf: make use of PROCMAP_QUERY ioctl if available")
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Link: https://lore.kernel.org/r/20240903012839.3178-1-chenyuan_fl@163.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
%.bpf.o objects depend on vmlinux.h, which makes them transitively
dependent on unnecessary libbpf headers. However vmlinux.h doesn't
actually change as often.
When generating vmlinux.h, compare it to a previous version and update
it only if there are changes.
Example of build time improvement (after first clean build):
$ touch ../../../lib/bpf/bpf.h
$ time make -j8
Before: real 1m37.592s
After: real 0m27.310s
Notice that %.bpf.o gen step is skipped if vmlinux.h hasn't changed.
Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4BzY1z5cC7BKye8=A8aTVxpsCzD=p1jdTfKC7i0XVuYoHUQ@mail.gmail.com
Link: https://lore.kernel.org/bpf/20240828174608.377204-2-ihor.solodrai@pm.me
Create a BTF with endianness different from host, make a distilled
base/split BTF pair from it, dump as raw bytes, import again and
verify that endianness is preserved.
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240830173406.1581007-1-eddyz87@gmail.com
This patch adds test cases for iter next method returning valid
pointer, which can also used as usage examples.
Currently iter next method should return valid pointer.
iter_next_trusted is the correct usage and test if iter next method
return valid pointer. bpf_iter_task_vma_next has KF_RET_NULL flag,
so the returned pointer may be NULL. We need to check if the pointer
is NULL before using it.
iter_next_trusted_or_null is the incorrect usage. There is no checking
before using the pointer, so it will be rejected by the verifier.
iter_next_rcu and iter_next_rcu_or_null are similar test cases for
KF_RCU_PROTECTED iterators.
iter_next_rcu_not_trusted is used to test that the pointer returned by
iter next method of KF_RCU_PROTECTED iterator cannot be passed in
KF_TRUSTED_ARGS kfuncs.
iter_next_ptr_mem_not_trusted is used to test that base type
PTR_TO_MEM should not be combined with type flag PTR_TRUSTED.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Link: https://lore.kernel.org/r/AM6PR03MB5848709758F6922F02AF9F1F99962@AM6PR03MB5848.eurprd03.prod.outlook.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch tests the epilogue patching when the main prog has
multiple BPF_EXIT. The verifier should have patched the 2nd (and
later) BPF_EXIT with a BPF_JA that goes back to the earlier
patched epilogue instructions.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-10-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds a pro/epilogue test when the main prog has a goto insn
that goes back to the very first instruction of the prog. It is
to test the correctness of the adjust_jmp_off(prog, 0, delta)
after the verifier has applied the prologue and/or epilogue patch.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-9-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds a gen_epilogue test to test a main prog
using a bpf_tail_call.
A non test_loader test is used. The tailcall target program,
"test_epilogue_subprog", needs to be used in a struct_ops map
before it can be loaded. Another struct_ops map is also needed
to host the actual "test_epilogue_tailcall" struct_ops program
that does the bpf_tail_call. The earlier test_loader patch
will attach all struct_ops maps but the bpf_testmod.c does
not support >1 attached struct_ops.
The earlier patch used the test_loader which has already covered
checking for the patched pro/epilogue instructions. This is done
by the __xlated tag.
This patch goes for the regular skel load and syscall test to do
the tailcall test that can also allow to directly pass the
the "struct st_ops_args *args" as ctx_in to the
SEC("syscall") program.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-8-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This test adds a new struct_ops "bpf_testmod_st_ops" in bpf_testmod.
The ops of the bpf_testmod_st_ops is triggered by new kfunc calls
"bpf_kfunc_st_ops_test_*logue". These new kfunc calls are
primarily used by the SEC("syscall") program. The test triggering
sequence is like:
SEC("syscall")
syscall_prologue(struct st_ops_args *args)
bpf_kfunc_st_op_test_prologue(args)
st_ops->test_prologue(args)
.gen_prologue adds 1000 to args->a
.gen_epilogue adds 10000 to args->a
.gen_epilogue will also set the r0 to 2 * args->a.
The .gen_prologue and .gen_epilogue of the bpf_testmod_st_ops
will test the prog->aux->attach_func_name to decide if
it needs to generate codes.
The main programs of the pro_epilogue.c will call a
new kfunc bpf_kfunc_st_ops_inc10 which does "args->a += 10".
It will also call a subprog() which does "args->a += 1".
This patch uses the test_loader infra to check the __xlated
instructions patched after gen_prologue and/or gen_epilogue.
The __xlated check is based on Eduard's example (Thanks!) in v1.
args->a is returned by the struct_ops prog (either the main prog
or the epilogue). Thus, the __retval of the SEC("syscall") prog
is checked. For example, when triggering the ops in the
'SEC("struct_ops/test_epilogue") int test_epilogue'
The expected args->a is +1 (subprog call) + 10 (kfunc call)
+ 10000 (.gen_epilogue) = 10011.
The expected return value is 2 * 10011 (.gen_epilogue).
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-7-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In test_loader based tests to bpf_map__attach_struct_ops()
before call to bpf_prog_test_run_opts() in order to trigger
bpf_struct_ops->reg() callbacks on kernel side.
This allows to use __retval macro for struct_ops tests.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-6-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When dropping a local kptr, any kptr stashed into it is supposed to be
freed through bpf_obj_free_fields->__bpf_obj_drop_impl recursively. Add a
test to make sure it happens.
The test first stashes a referenced kptr to "struct task" into a local
kptr and gets the reference count of the task. Then, it drops the local
kptr and reads the reference count of the task again. Since
bpf_obj_free_fields and __bpf_obj_drop_impl will go through the local kptr
recursively during bpf_obj_drop, the dtor of the stashed task kptr should
eventually be called. The second reference count should be one less than
the first one.
Signed-off-by: Amery Hung <amery.hung@bytedance.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240827011301.608620-1-amery.hung@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds test cases for zero offset (implicit cast) or non-zero
offset pointer as KF_ACQUIRE kfuncs argument. Currently KF_ACQUIRE
kfuncs should support passing in pointers like &sk->sk_write_queue
(non-zero offset) or &sk->__sk_common (zero offset) and not be rejected
by the verifier.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Link: https://lore.kernel.org/r/AM6PR03MB5848CB6F0D4D9068669A905B99952@AM6PR03MB5848.eurprd03.prod.outlook.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Smatch reported the following warning:
./tools/testing/selftests/bpf/testing_helpers.c:455 get_xlated_program()
warn: variable dereferenced before check 'buf' (see line 454)
It seems correct,so let's modify it based on it's suggestion.
Actually,commit b23ed4d74c ("selftests/bpf: Fix invalid pointer
check in get_xlated_program()") fixed an issue in the test_verifier.c
once,but it was reverted this time.
Let's solve this issue with the minimal changes possible.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/1eb3732f-605a-479d-ba64-cd14250cbf91@stanley.mountain/
Fixes: b4b7a4099b ("selftests/bpf: Factor out get_xlated_program() helper")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Link: https://lore.kernel.org/r/20240820023622.29190-1-hao.ge@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZsiMrQAKCRDbK58LschI
g1mtAP9wBoNO9sNRrJ2OUg69R5uSTT2//v7icN01xwVtx9ir/AD+PJ+v/WG1QVlM
6GNsPoGtQ53ptuiJFfXEkuVELGqKywY=
=I/T4
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-08-23
We've added 10 non-merge commits during the last 15 day(s) which contain
a total of 10 files changed, 222 insertions(+), 190 deletions(-).
The main changes are:
1) Add TCP_BPF_SOCK_OPS_CB_FLAGS to bpf_*sockopt() to address the case
when long-lived sockets miss a chance to set additional callbacks
if a sockops program was not attached early in their lifetime,
from Alan Maguire.
2) Add a batch of BPF selftest improvements which fix a few bugs and add
missing features to improve the test coverage of sockmap/sockhash,
from Michal Luczaj.
3) Fix a false-positive Smatch-reported off-by-one in tcp_validate_cookie()
which is part of the test_tcp_custom_syncookie BPF selftest,
from Kuniyuki Iwashima.
4) Fix the flow_dissector BPF selftest which had a bug in IP header's
tot_len calculation doing subtraction after htons() instead of inside
htons(), from Asbjørn Sloth Tønnesen.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftest: bpf: Remove mssind boundary check in test_tcp_custom_syncookie.c.
selftests/bpf: Introduce __attribute__((cleanup)) in create_pair()
selftests/bpf: Exercise SOCK_STREAM unix_inet_redir_to_connected()
selftests/bpf: Honour the sotype of af_unix redir tests
selftests/bpf: Simplify inet_socketpair() and vsock_socketpair_connectible()
selftests/bpf: Socket pair creation, cleanups
selftests/bpf: Support more socket types in create_pair()
selftests/bpf: Avoid subtraction after htons() in ipip tests
selftests/bpf: add sockopt tests for TCP_BPF_SOCK_OPS_CB_FLAGS
bpf/bpf_get,set_sockopt: add option to set TCP-BPF sock ops flags
====================
Link: https://patch.msgid.link/20240823134959.1091-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Save pkg-config output for libpcap as simply-expanded variables.
For an obscure reason 'shell' call in LDLIBS/CFLAGS recursively
expanded variables makes *.test.o files compilation non-parallel
when make is executed with -j option.
While at it, reuse 'pkg-config --cflags' call to define
-DTRAFFIC_MONITOR=1 option, it's exit status is the same as for
'pkg-config --exists'.
Fixes: f52403b6bf ("selftests/bpf: Add traffic monitor functions.")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240823194409.774815-1-eddyz87@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Test stashing both referenced kptr and local kptr into local kptrs. Then,
test unstashing them.
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Amery Hung <amery.hung@bytedance.com>
Link: https://lore.kernel.org/r/20240813212424.2871455-6-amery.hung@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of parsing text-based /proc/<pid>/maps file, try to use
PROCMAP_QUERY ioctl() to simplify and speed up data fetching.
This logic is used to do uprobe file offset calculation, so any bugs in
this logic would manifest as failing uprobe BPF selftests.
This also serves as a simple demonstration of one of the intended uses.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240806230319.869734-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extract local label length as a #define directive and
elaborate why 'i % MAX_LOCAL_LABELS' expression is needed
for local labels array initialization.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240823080644.263943-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Depending on kernel parameters, x86 jit generates either retq or jump
to rethunk for 'exit' instruction. The difference could be seen when
kernel is booted with and without mitigations=off parameter.
Relax the verifier_tailcall_jit test case to match both variants.
Fixes: e5bdd6a8be ("selftests/bpf: validate jit behaviour for tail calls")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240823080644.263943-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
At the moment, when test_loader.c:get_current_arch() can't determine
the arch, it returns 0. The arch check in run_subtest() looks as
follows:
if ((get_current_arch() & spec->arch_mask) == 0) {
test__skip();
return;
}
Which means that all test_loader based tests would be skipped if arch
could not be determined. get_current_arch() recognizes x86_64, arm64
and riscv64. Which means that CI skips test_loader tests for s390.
Fix this by making sure that get_current_arch() always returns
non-zero value. In combination with default spec->arch_mask == -1 this
should cover all possibilities.
Fixes: f406026fef ("selftests/bpf: by default use arch mask allowing all archs")
Fixes: 7d743e4c75 ("selftests/bpf: __jited test tag to check disassembly after jit")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240823080644.263943-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a selftest to confirm the issue, which gets -EINVAL when update
attached freplace prog to prog_array map, has been fixed.
cd tools/testing/selftests/bpf; ./test_progs -t tailcalls
328/25 tailcalls/tailcall_freplace:OK
328 tailcalls:OK
Summary: 1/25 PASSED, 0 SKIPPED, 0 FAILED
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20240728114612.48486-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use kfunc_bpf_cast_to_kern_ctx() and kfunc_bpf_rdonly_cast() to verify
that bpf_fastcall pattern is recognized for kfunc calls.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If test case does not specify architecture via __arch_* macro consider
that it should be run for all architectures.
Fixes: 7d743e4c75 ("selftests/bpf: __jited test tag to check disassembly after jit")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Attribute used by LLVM implementation of the feature had been changed
from no_caller_saved_registers to bpf_fastcall (see [1]).
This commit replaces references to nocsr by references to bpf_fastcall
to keep LLVM and selftests parts in sync.
[1] https://github.com/llvm/llvm-project/pull/105417
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Check that verifier rejects BPF program containing relocation
pointing to non-existent BTF type.
To force relocation resolution on kernel side test case uses
bpf_attr->core_relos field. This field is not exposed by libbpf,
so directly do BPF system call in the test.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822080124.2995724-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Smatch reported a possible off-by-one in tcp_validate_cookie().
However, it's false positive because the possible range of mssind is
limited from 0 to 3 by the preceding calculation.
mssind = (cookie & (3 << 6)) >> 6;
Now, the verifier does not complain without the boundary check.
Let's remove the checks.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/bpf/6ae12487-d3f1-488b-9514-af0dac96608f@stanley.mountain/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240821013425.49316-1-kuniyu@amazon.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Both __xlated and __jited work with disassembly.
It is logical to have both work in a similar manner.
This commit updates __xlated macro handling in test_loader.c by making
it expect matches on sequential lines, same way as __jited operates.
For example:
__xlated("1: *(u64 *)(r10 -16) = r1") ;; matched on line N
__xlated("3: r0 = &(void __percpu *)(r0)") ;; matched on line N+1
Also:
__xlated("1: *(u64 *)(r10 -16) = r1") ;; matched on line N
__xlated("...") ;; not matched
__xlated("3: r0 = &(void __percpu *)(r0)") ;; mantched on any
;; line >= N
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-10-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A program calling sub-program which does a tail call.
The idea is to verify instructions generated by jit for tail calls:
- in program and sub-program prologues;
- for subprogram call instruction;
- for tail call itself.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-9-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow to verify jit behaviour by writing tests as below:
SEC("tp")
__arch_x86_64
__jited(" endbr64")
__jited(" nopl (%rax,%rax)")
__jited(" xorq %rax, %rax")
...
__naked void some_test(void)
{
asm volatile (... ::: __clobber_all);
}
Allow regular expressions in patterns, same way as in __msg.
By default assume that each __jited pattern has to be matched on the
next consecutive line of the disassembly, e.g.:
__jited(" endbr64") # matched on line N
__jited(" nopl (%rax,%rax)") # matched on line N+1
If match occurs on a wrong line an error is reported.
To override this behaviour use __jited("..."), e.g.:
__jited(" endbr64") # matched on line N
__jited("...") # not matched
__jited(" nopl (%rax,%rax)") # matched on any line >= N
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit adds a utility function to get disassembled text for jited
representation of a BPF program designated by file descriptor.
Function prototype looks as follows:
int get_jited_program_text(int fd, char *text, size_t text_sz)
Where 'fd' is a file descriptor for the program, 'text' and 'text_sz'
refer to a destination buffer for disassembled text.
Output format looks as follows:
18: 77 06 ja L0
1a: 50 pushq %rax
1b: 48 89 e0 movq %rsp, %rax
1e: eb 01 jmp L1
20: 50 L0: pushq %rax
21: 50 L1: pushq %rax
^ ^^^^^^^^ ^ ^^^^^^^^^^^^^^^^^^
| binary insn | textual insn
| representation | representation
| |
instruction offset inferred local label name
The code and makefile changes are inspired by jit_disasm.c from bpftool.
Use llvm libraries to disassemble BPF program instead of libbfd to avoid
issues with disassembly output stability pointed out in [1].
Selftests makefile uses Makefile.feature to detect if LLVM libraries
are available. If that is not the case selftests build proceeds but
the function returns -EOPNOTSUPP at runtime.
[1] commit eb9d1acf63 ("bpftool: Add LLVM as default library for disassembling JIT-ed programs")
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Upcoming changes require a notation to specify regular expression
matches for regular verifier log messages, disassembly of BPF
instructions, disassembly of jited instructions.
Neither basic nor extended POSIX regular expressions w/o additional
escaping are good for this role because of wide use of special
characters in disassembly, for example:
movq -0x10(%rbp), %rax ;; () are special characters
cmpq $0x21, %rax ;; $ is a special character
*(u64 *)(r10 -16) = r1 ;; * and () are special characters
This commit borrows syntax from LLVM's FileCheck utility.
It replaces __regex macro with ability to embed regular expressions
in __msg patters using "{{" "}}" pairs for escaping.
Syntax for __msg patterns:
pattern := (<verbatim text> | regex)*
regex := "{{" <posix extended regular expression> "}}"
For example, pattern "foo{{[0-9]+}}" matches strings like
"foo0", "foo007", etc.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
__msg, __regex and __xlated tags are based on
__attribute__((btf_decl_tag("..."))) annotations.
Clang de-duplicates such annotations, e.g. the following
two sequences of tags are identical in final BTF:
/* seq A */ /* seq B */
__tag("foo") __tag("foo")
__tag("bar") __tag("bar")
__tag("foo")
Fix this by adding a unique suffix for each tag using __COUNTER__
pre-processor macro. E.g. here is a new definition for __msg:
#define __msg(msg) \
__attribute__((btf_decl_tag("comment:test_expect_msg=" XSTR(__COUNTER__) "=" msg)))
Using this definition the "seq A" from example above is translated to
BTF as follows:
[..] DECL_TAG 'comment:test_expect_msg=0=foo' type_id=X component_idx=-1
[..] DECL_TAG 'comment:test_expect_msg=1=bar' type_id=X component_idx=-1
[..] DECL_TAG 'comment:test_expect_msg=2=foo' type_id=X component_idx=-1
Surprisingly, this bug affects a single existing test:
verifier_spill_fill/old_stack_misc_vs_cur_ctx_ptr,
where sequence of identical messages was expected in the log.
Fixes: 537c3f66ea ("selftests/bpf: add generic BPF program tester-loader")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Suppose log="foo bar buz" and msg->substr="bar".
In such case current match processing logic would update 'log' as
follows: log += strlen(msg->substr); -> log += 3 -> log=" bar".
However, the intent behind the 'log' update is to make it point after
the successful match, e.g. to make log=" buz" in the example above.
Fixes: 4ef5d6af49 ("selftests/bpf: no need to track next_match_pos in struct test_loader")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When running test_loader based tests in the verbose mode each matched
message leaves a trace in the stderr, e.g.:
./test_progs -vvv -t ...
validate_msgs:PASS:expect_msg 0 nsec
validate_msgs:PASS:expect_msg 0 nsec
validate_msgs:PASS:expect_msg 0 nsec
validate_msgs:PASS:expect_msg 0 nsec
validate_msgs:PASS:expect_msg 0 nsec
This is not very helpful when debugging such tests and clobbers the
log a lot.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Define BPF iterator "getter" kfunc, which accepts iterator pointer as
one of the arguments. Make sure that argument passed doesn't have to be
the very first argument (unlike new-next-destroy combo).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240808232230.2848712-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Rewrite function to have (unneeded) socket descriptors automatically
close()d when leaving the scope. Make sure the "ownership" of fds is
correctly passed via take_fd(); i.e. descriptor returned to caller will
remain valid.
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20240731-selftest-sockmap-fixes-v2-6-08a0c73abed2@rbox.co
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Constants got switched reducing the test's coverage. Replace SOCK_DGRAM
with SOCK_STREAM in one of unix_inet_skb_redir_to_connected() tests.
Fixes: 51354f700d ("bpf, sockmap: Add af_unix test with both sockets in map")
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20240731-selftest-sockmap-fixes-v2-5-08a0c73abed2@rbox.co
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Do actually test the sotype as specified by the caller.
This picks up after commit 75e0e27db6 ("selftest/bpf: Change udp to inet
in some function names").
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20240731-selftest-sockmap-fixes-v2-4-08a0c73abed2@rbox.co
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Replace implementation with a call to a generic function.
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20240731-selftest-sockmap-fixes-v2-3-08a0c73abed2@rbox.co
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Following create_pair() changes, remove unused function argument in
create_socket_pairs() and adapt its callers, i.e. drop the open-coded
loopback socket creation.
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20240731-selftest-sockmap-fixes-v2-2-08a0c73abed2@rbox.co
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Extend the function to allow creating socket pairs of SOCK_STREAM,
SOCK_DGRAM and SOCK_SEQPACKET.
Adapt direct callers and leave further cleanups for the following patch.
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20240731-selftest-sockmap-fixes-v2-1-08a0c73abed2@rbox.co
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
GCC errors when compiling tailcall_bpf2bpf_hierarchy2.c and
tailcall_bpf2bpf_hierarchy3.c with the following error:
progs/tailcall_bpf2bpf_hierarchy2.c: In function 'tailcall_bpf2bpf_hierarchy_2':
progs/tailcall_bpf2bpf_hierarchy2.c:66:9: error: input operand constraint contains '+'
66 | asm volatile (""::"r+"(ret));
| ^~~
Changed implementation to make use of __sink macro that abstracts the
desired behaviour.
The proposed change seems valid for both GCC and CLANG.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240819151129.1366484-4-cupertino.miranda@oracle.com
verfifier_nocsr.c fails to compile in GCC. The reason behind it was
initially explained in commit 27a90b14b9.
"A few BPF selftests perform type punning and they may break strict
aliasing rules, which are exploited by both GCC and clang by default
while optimizing. This can lead to broken compiled programs."
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240819151129.1366484-2-cupertino.miranda@oracle.com
Enable traffic monitoring for the subtests of select_reuseport.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240815053254.470944-7-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Enable traffic monitor for each subtest of sockmap_listen.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240815053254.470944-6-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Enable traffic monitoring for the test case tc_redirect.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240815053254.470944-5-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
netns_new()/netns_free() create/delete network namespaces. They support the
option '-m' of test_progs to start/stop traffic monitor for the network
namespace being created for matched tests.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240815053254.470944-4-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add option '-m' to test_progs to accept names and patterns of test cases.
This option will be used later to enable traffic monitor that capture
network packets generated by test cases.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240815053254.470944-3-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add functions that capture packets and print log in the background. They
are supposed to be used for debugging flaky network test cases. A monitored
test case should call traffic_monitor_start() to start a thread to capture
packets in the background for a given namespace and call
traffic_monitor_stop() to stop capturing. (Or, option '-m' implemented by
the later patches.)
lo In IPv4 127.0.0.1:40265 > 127.0.0.1:55907: TCP, length 68, SYN
lo In IPv4 127.0.0.1:55907 > 127.0.0.1:40265: TCP, length 60, SYN, ACK
lo In IPv4 127.0.0.1:40265 > 127.0.0.1:55907: TCP, length 60, ACK
lo In IPv4 127.0.0.1:55907 > 127.0.0.1:40265: TCP, length 52, ACK
lo In IPv4 127.0.0.1:40265 > 127.0.0.1:55907: TCP, length 52, FIN, ACK
lo In IPv4 127.0.0.1:55907 > 127.0.0.1:40265: TCP, length 52, RST, ACK
Packet file: packets-2173-86-select_reuseport:sockhash_IPv4_TCP_LOOPBACK_test_detach_bpf-test.log
#280/87 select_reuseport/sockhash IPv4/TCP LOOPBACK test_detach_bpf:OK
The above is the output of an example. It shows the packets of a connection
and the name of the file that contains captured packets in the directory
/tmp/tmon_pcap. The file can be loaded by tcpdump or wireshark.
This feature only works if libpcap is available. (Could be found by pkg-config)
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240815053254.470944-2-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
test_skb_cgroup_id_user allows testing skb cgroup id retrieval at different
levels, but is not integrated in test_progs, so it is not run
automatically in CI. The test overlaps a bit with
cgroup_skb_sk_lookup_kern, which is integrated in test_progs and test
extensively skb cgroup helpers, but there is still one major difference
between the two tests which justifies the conversion:
cgroup_skb_sk_lookup_kern deals with a BPF_PROG_TYPE_CGROUP_SKB (attached
on a cgroup), while test_skb_cgroup_id_user deals with a
BPF_PROG_TYPE_SCHED_CLS (attached on a qdisc)
Convert test_skb_cgroup_id_user into test_progs framework in order to run
it automatically in CI. The main differences with the original test are the
following:
- rename the test to make it shorter and more straightforward regarding
tested feature
- the wrapping shell script has been dropped since every setup step is now
handled in the main C test file
- the test has been renamed for a shorter name and reflecting the tested
API
- add dedicated assert log per level to ease test failure debugging
- use global variables instead of maps to access bpf prog data
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240813-convert_cgroup_tests-v4-4-a33c03458cf6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
test_skb_cgroup_id_kern.c is currently involved in a manual test. In its
current form, it can not be used with the auto-generated skeleton APIs,
because the section name is not valid to allow libbpf to deduce the program
type.
Update section name to allow skeleton APIs usage. Also rename the program
name to make it shorter and more straighforward regarding the API it is
testing. While doing so, make sure that test_skb_cgroup_id.sh passes to get
a working reference before converting it to test_progs
- update the obj name
- fix loading issue (verifier rejecting the program when loaded through tc,
because of map not found), by preloading the whole obj with bpftool
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240813-convert_cgroup_tests-v4-3-a33c03458cf6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
test_cgroup_storage is currently a standalone program which is not run
when executing test_progs.
Convert it to the test_progs framework so it can be automatically executed
in CI. The conversion led to the following changes:
- converted the raw bpf program in the userspace test file into a dedicated
test program in progs/ dir
- reduced the scope of cgroup_storage test: the content from this test
overlaps with some other tests already present in test_progs, most
notably netcnt and cgroup_storage_multi*. Those tests already check
extensively local storage, per-cpu local storage, cgroups interaction,
etc. So the new test only keep the part testing that the program return
code (based on map content) properly leads to packet being passed or
dropped.
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240813-convert_cgroup_tests-v4-2-a33c03458cf6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
get_current_cgroup_id_user allows testing for bpf_get_current_cgroup_id()
bpf API but is not integrated into test_progs, and so is not tested
automatically in CI.
Convert it to the test_progs framework to allow running it automatically.
The most notable differences with the old test are the following:
- the new test relies on autoattach instead of manually hooking/enabling
the targeted tracepoint through perf_event, which reduces quite a lot the
test code size
- it also accesses bpf prog data through global variables instead of maps
- sleep duration passed to nanosleep syscall has been reduced to its
minimum to not impact overall CI duration (we only care about the syscall
being properly triggered, not about the passed duration)
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240813-convert_cgroup_tests-v4-1-a33c03458cf6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
On little-endian systems, doing subtraction after htons()
leads to interesting results:
Given:
MAGIC_BYTES = 123 = 0x007B aka. in big endian: 0x7B00 = 31488
sizeof(struct iphdr) = 20
Before this patch:
__bpf_constant_htons(MAGIC_BYTES) - sizeof(struct iphdr) = 0x7AEC
0x7AEC = htons(0xEC7A) = htons(60538)
So these were outer IP packets with a total length of 123 bytes,
containing an inner IP packet with a total length of 60538 bytes.
After this patch:
__bpf_constant_htons(MAGIC_BYTES - sizeof(struct iphdr)) = htons(103)
Now these packets are outer IP packets with a total length of 123 bytes,
containing an inner IP packet with a total length of 103 bytes.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@kernel.org>
Link: https://lore.kernel.org/r/20240808075906.1849564-1-ast@fiberby.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
A selftest is added such that without the previous patch,
a crash can happen. With the previous patch, the test can
run successfully. The new test is written in a way which
mimics original crash case:
main_prog
static_prog_1
static_prog_2
where static_prog_1 has different paths to static_prog_2
and some path has stack allocated and some other path
does not. A stacksafe() checking in static_prog_2()
triggered the crash.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240812214852.214037-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add tests to set TCP sockopt TCP_BPF_SOCK_OPS_CB_FLAGS via
bpf_setsockopt() and use a cgroup/getsockopt program to retrieve
the value to verify it was set.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20240808150558.1035626-3-alan.maguire@oracle.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add test for bpf_get_dentry_xattr on hook security_inode_getxattr.
Verify that the kfunc can read the xattr. Also test failing getxattr
from user space by returning non-zero from the LSM bpf program.
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240806230904.71194-4-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a bunch of positive selftests which extensively cover the various
contexts and parameters in which the new VFS based BPF kfuncs may be
used from.
Again, the following VFS based BPF kfuncs are thoroughly tested within
this new selftest:
* struct file *bpf_get_task_exe_file(struct task_struct *);
* void bpf_put_file(struct file *);
* int bpf_path_d_path(struct path *, char *, size_t);
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Link: https://lore.kernel.org/r/20240731110833.1834742-4-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a bunch of negative selftests responsible for asserting that the
BPF verifier successfully rejects a BPF program load when the
underlying BPF program misuses one of the newly introduced VFS based
BPF kfuncs.
The following VFS based BPF kfuncs are extensively tested within this
new selftest:
* struct file *bpf_get_task_exe_file(struct task_struct *);
* void bpf_put_file(struct file *);
* int bpf_path_d_path(struct path *, char *, size_t);
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Link: https://lore.kernel.org/r/20240731110833.1834742-3-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jakub reported bpf selftest "btf_dump" failure after forwarding to
v6.11-rc1 with netdev.
Error: #33 btf_dump
Error: #33/15 btf_dump/btf_dump: var_data
btf_dump_data:FAIL:find type id unexpected find type id: actual -2 < expected 0
The reason for the failure is due to
commit 94ede2a3e9 ("profiling: remove stale percpu flip buffer variables")
where percpu static variable "cpu_profile_flip" is removed.
Let us replace "cpu_profile_flip" with a variable in bpf subsystem
so whenever that variable gets deleted or renamed, we can detect the
failure immediately. In this case, I picked a static percpu variable
"bpf_cgrp_storage_busy" which is defined in kernel/bpf/bpf_cgrp_storage.c.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240802185434.1749056-1-yonghong.song@linux.dev
These are three important bug fixes for the cross-architecture tree,
fixing a regression with the new syscall.tbl file, the inconsistent
numbering for the new uretprobe syscall and a bug with iowrite64be
on alpha.
-----BEGIN PGP SIGNATURE-----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=0iyr
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"These are three important bug fixes for the cross-architecture tree,
fixing a regression with the new syscall.tbl file, the inconsistent
numbering for the new uretprobe syscall and a bug with iowrite64be on
alpha"
* tag 'asm-generic-fixes-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
syscalls: fix syscall macros for newfstat/newfstatat
uretprobe: change syscall number, again
alpha: fix ioread64be()/iowrite64be() helpers
Despite multiple attempts to get the syscall number assignment right
for the newly added uretprobe syscall, we ended up with a bit of a mess:
- The number is defined as 467 based on the assumption that the
xattrat family of syscalls would use 463 through 466, but those
did not make it into 6.11.
- The include/uapi/asm-generic/unistd.h file still lists the number
463, but the new scripts/syscall.tbl that was supposed to have the
same data lists 467 instead as the number for arc, arm64, csky,
hexagon, loongarch, nios2, openrisc and riscv. None of these
architectures actually provide a uretprobe syscall.
- All the other architectures (powerpc, arm, mips, ...) don't list
this syscall at all.
There are two ways to make it consistent again: either list it with
the same syscall number on all architectures, or only list it on x86
but not in scripts/syscall.tbl and asm-generic/unistd.h.
Based on the most recent discussion, it seems like we won't need it
anywhere else, so just remove the inconsistent assignment and instead
move the x86 number to the next available one in the architecture
specific range, which is 335.
Fixes: 5c28424e9a ("syscalls: Fix to add sys_uretprobe to syscall.tbl")
Fixes: 190fec72df ("uprobe: Wire up uretprobe system call")
Fixes: 63ded11097 ("uprobe: Change uretprobe syscall scope and number")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This way uprobe_unregister() and uprobe_apply() can use "struct uprobe *"
rather than inode + offset. This simplifies the code and allows to avoid
the unnecessary find_uprobe() + put_uprobe() in these functions.
TODO: uprobe_unregister() still needs get_uprobe/put_uprobe to ensure that
this uprobe can't be freed before up_write(&uprobe->register_rwsem).
Co-developed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240801132734.GA8803@redhat.com
It doesn't make any sense to have 2 versions of _register(). Note that
trace_uprobe_enable(), the only user of uprobe_register(), doesn't need
to check tu->ref_ctr_offset to decide which one should be used, it could
safely pass ref_ctr_offset == 0 to uprobe_register_refctr().
Add this argument to uprobe_register(), update the callers, and kill
uprobe_register_refctr().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240801132728.GA8800@redhat.com
Current cgroup_dev test mostly tests that device operation is accepted or
refused base on passed major/minor (and so, any operation performed during
test involves only char device)
Add a small subtest ensuring that the device type passed to bpf program
allows it to take decisions as well.
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240731-convert_dev_cgroup-v4-3-849425d90de6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
test_dev_cgroup is defined as a standalone test program, and so is not
executed in CI.
Convert it to test_progs framework so it is tested automatically in CI, and
remove the old test. In order to be able to run it in test_progs, /dev/null
must remain usable, so change the new test to test operations on devices
1:3 as valid, and operations on devices 1:5 (/dev/zero) as invalid.
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240731-convert_dev_cgroup-v4-2-849425d90de6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
test_dev_cgroup currently loads a small bpf program allowing any access on
urandom and zero devices, disabling access to any other device. It makes
migrating this test to test_progs impossible, since this one manipulates
extensively /dev/null.
Allow /dev/null manipulation in dev_cgroup program to make its usage in
test_progs framework possible. Update test_dev_cgroup.c as well to match
this change while it has not been removed.
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240731-convert_dev_cgroup-v4-1-849425d90de6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
When building selftests with RELEASE=1 using GCC compiler, it complaints
about uninitialized err. Fix the problem.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240730231805.1933923-1-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Linux 5.1 implemented 64-bit time types and related syscalls to address the
Y2038 problem generally across archs. Userspace handling of Y2038 varies
with the libc however. While musl libc uses 64-bit time across all 32-bit
and 64-bit platforms, GNU glibc uses 64-bit time on 64-bit platforms but
defaults to 32-bit time on 32-bit platforms unless they "opt-in" to 64-bit
time or explicitly use 64-bit syscalls and time structures.
One specific area is the standard setsockopt() call, SO_TIMESTAMPNS option
used for timestamping, and the related output 'struct timespec'. GNU glibc
defaults as above, also exposing the SO_TIMESTAMPNS_NEW flag to explicitly
use a 64-bit call and 'struct __kernel_timespec'. Since these are not
exposed or needed with musl libc, their use in tc_redirect.c leads to
compile errors building for mips64el/musl:
tc_redirect.c: In function 'rcv_tstamp':
tc_redirect.c:425:32: error: 'SO_TIMESTAMPNS_NEW' undeclared (first use in this function); did you mean 'SO_TIMESTAMPNS'?
425 | cmsg->cmsg_type == SO_TIMESTAMPNS_NEW)
| ^~~~~~~~~~~~~~~~~~
| SO_TIMESTAMPNS
tc_redirect.c:425:32: note: each undeclared identifier is reported only once for each function it appears in
tc_redirect.c: In function 'test_inet_dtime':
tc_redirect.c:491:49: error: 'SO_TIMESTAMPNS_NEW' undeclared (first use in this function); did you mean 'SO_TIMESTAMPNS'?
491 | err = setsockopt(listen_fd, SOL_SOCKET, SO_TIMESTAMPNS_NEW,
| ^~~~~~~~~~~~~~~~~~
| SO_TIMESTAMPNS
However, using SO_TIMESTAMPNS_NEW isn't strictly needed, nor is Y2038 being
explicitly tested. The timestamp checks in tc_redirect.c are simple: the
packet receive timestamp is non-zero and processed/handled in less than 5
seconds.
Switch to using the standard setsockopt() call and SO_TIMESTAMPNS option to
ensure compatibility across glibc and musl libc. In the worst-case, there
is a 5-second window 14 years from now where tc_redirect tests may fail on
32-bit systems. However, we should reasonably expect glibc to adopt a
64-bit mandate rather than the current "opt-in" policy before the Y2038
roll-over.
Fixes: ce6f6cffae ("selftests/bpf: Wait for the netstamp_needed_key static key to be turned on")
Fixes: c803475fd8 ("bpf: selftests: test skb->tstamp in redirect_neigh")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/031d656c058b4e55ceae56ef49c4e1729b5090f3.1722244708.git.tony.ambardar@gmail.com
Typically stdin, stdout, stderr are treated as reserved identifiers under
ISO/ANSI C and libc implementations further define these as macros, both in
glibc and musl <stdio.h>.
However, while glibc defines:
...
/* Standard streams. */
extern FILE *stdin; /* Standard input stream. */
extern FILE *stdout; /* Standard output stream. */
extern FILE *stderr; /* Standard error output stream. */
/* C89/C99 say they're macros. Make them happy. */
#define stdin stdin
#define stdout stdout
#define stderr stderr
...
musl instead uses (legally):
...
extern FILE *const stdin;
extern FILE *const stdout;
extern FILE *const stderr;
#define stdin (stdin)
#define stdout (stdout)
#define stderr (stderr)
...
The latter results in compile errors when the names are reused as fields of
'struct test_env' and elsewhere in test_progs.[ch] and reg_bounds.c.
Rename the fields to stdout_saved and stderr_saved to avoid many errors
seen building against musl, e.g.:
In file included from test_progs.h:6,
from test_progs.c:5:
test_progs.c: In function 'print_test_result':
test_progs.c:237:21: error: expected identifier before '(' token
237 | fprintf(env.stdout, "#%-*d %s:", TEST_NUM_WIDTH, test->test_num, test->test_name);
| ^~~~~~
test_progs.c:237:9: error: too few arguments to function 'fprintf'
237 | fprintf(env.stdout, "#%-*d %s:", TEST_NUM_WIDTH, test->test_num, test->test_name);
| ^~~~~~~
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/ZqR2DuHdBXPX%2Fyx8@kodidev-ubuntu/
Link: https://lore.kernel.org/bpf/684ea17548e237f39dfb3f7a3d33450069015b21.1722244708.git.tony.ambardar@gmail.com
Include GNU <execinfo.h> header only with glibc and provide weak, stubbed
backtrace functions as a fallback in test_progs.c. This allows for non-GNU
replacements while avoiding compile errors (e.g. with musl libc) like:
test_progs.c:13:10: fatal error: execinfo.h: No such file or directory
13 | #include <execinfo.h> /* backtrace */
| ^~~~~~~~~~~~
test_progs.c: In function 'crash_handler':
test_progs.c:1034:14: error: implicit declaration of function 'backtrace' [-Werror=implicit-function-declaration]
1034 | sz = backtrace(bt, ARRAY_SIZE(bt));
| ^~~~~~~~~
test_progs.c:1045:9: error: implicit declaration of function 'backtrace_symbols_fd' [-Werror=implicit-function-declaration]
1045 | backtrace_symbols_fd(bt, sz, STDERR_FILENO);
| ^~~~~~~~~~~~~~~~~~~~
Fixes: 9fb156bb82 ("selftests/bpf: Print backtrace on SIGSEGV in test_progs")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/aa6dc8e23710cb457b278039d0081de7e7b4847d.1722244708.git.tony.ambardar@gmail.com
Compiling lwt_reroute.c with GCC 12.3 for mips64el/musl-libc yields errors:
In file included from .../include/arpa/inet.h:9,
from ./test_progs.h:18,
from tools/testing/selftests/bpf/prog_tests/lwt_helpers.h:11,
from tools/testing/selftests/bpf/prog_tests/lwt_reroute.c:52:
.../include/netinet/in.h:23:8: error: redefinition of 'struct in6_addr'
23 | struct in6_addr {
| ^~~~~~~~
In file included from .../include/linux/icmp.h:24,
from tools/testing/selftests/bpf/prog_tests/lwt_helpers.h:9:
.../include/linux/in6.h:33:8: note: originally defined here
33 | struct in6_addr {
| ^~~~~~~~
.../include/netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6'
34 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../include/linux/in6.h:50:8: note: originally defined here
50 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../include/netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq'
42 | struct ipv6_mreq {
| ^~~~~~~~~
.../include/linux/in6.h:60:8: note: originally defined here
60 | struct ipv6_mreq {
| ^~~~~~~~~
These errors occur because <linux/in6.h> is included before <netinet/in.h>,
bypassing the Linux uapi/libc compat mechanism's partial musl support. As
described in [1] and [2], fix these errors by including <netinet/in.h> in
lwt_reroute.c before any uapi headers.
[1]: commit c0bace7984 ("uapi libc compat: add fallback for unsupported libcs")
[2]: https://git.musl-libc.org/cgit/musl/commit/?id=04983f227238
Fixes: 6c77997bc6 ("selftests/bpf: Add lwt_xmit tests for BPF_REROUTE")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/bd2908aec0755ba8b75f5dc41848b00585f5c73e.1722244708.git.tony.ambardar@gmail.com
While building, bpftool makes a skeleton from test_core_extern.c, which
itself includes <stdbool.h> and uses the 'bool' type. However, the skeleton
test_core_extern.skel.h generated *does not* include <stdbool.h> or use the
'bool' type, instead using the C-only '_Bool' type. Compiling test_cpp.cpp
with g++ 12.3 for mips64el/musl-libc then fails with error:
In file included from test_cpp.cpp:9:
test_core_extern.skel.h:45:17: error: '_Bool' does not name a type
45 | _Bool CONFIG_BOOL;
| ^~~~~
This was likely missed previously because glibc uses a GNU extension for
<stdbool.h> with C++ (#define _Bool bool), not supported by musl libc.
Normally, a C fragment would include <stdbool.h> and use the 'bool' type,
and thus cleanly work after import by C++. The ideal fix would be for
'bpftool gen skeleton' to output the correct type/include supporting C++,
but in the meantime add a conditional define as above.
Fixes: 7c8dce4b16 ("bpftool: Make skeleton C code compilable with C++ compiler")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/6fc1dd28b8bda49e51e4f610bdc9d22f4455632d.1722244708.git.tony.ambardar@gmail.com
Although the post-increment in macro 'CPU_SET(next++, &cpuset)' seems safe,
the sequencing can raise compile errors, so move the increment outside the
macro. This avoids an error seen using gcc 12.3.0 for mips64el/musl-libc:
In file included from test_lru_map.c:11:
test_lru_map.c: In function 'sched_next_online':
test_lru_map.c:129:29: error: operation on 'next' may be undefined [-Werror=sequence-point]
129 | CPU_SET(next++, &cpuset);
| ^
cc1: all warnings being treated as errors
Fixes: 3fbfadce60 ("bpf: Fix test_lru_sanity5() in test_lru_map.c")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/22993dfb11ccf27925a626b32672fd3324cb76c4.1722244708.git.tony.ambardar@gmail.com
Current code parses arguments with strtok_r() using a construct like
char *state = NULL;
while ((next = strtok_r(state ? NULL : input, ",", &state))) {
...
}
where logic assumes the 'state' var can distinguish between first and
subsequent strtok_r() calls, and adjusts parameters accordingly. However,
'state' is strictly internal context for strtok_r() and no such assumptions
are supported in the man page. Moreover, the exact behaviour of 'state'
depends on the libc implementation, making the above code fragile.
Indeed, invoking "./test_progs -t <test_name>" on mips64el/musl will hang,
with the above code in an infinite loop.
Similarly, we see strange behaviour running 'veristat' on mips64el/musl:
$ ./veristat -e file,prog,verdict,insns -C two-ok add-failure
Can't specify more than 9 stats
Rewrite code using a counter to distinguish between strtok_r() calls.
Fixes: 61ddff373f ("selftests/bpf: Improve by-name subtest selection logic in prog_tests")
Fixes: 394169b079 ("selftests/bpf: add comparison mode to veristat")
Fixes: c8bc5e0509 ("selftests/bpf: Add veristat tool for mass-verifying BPF object files")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/392d8bf5559f85fa37926c1494e62312ef252c3d.1722244708.git.tony.ambardar@gmail.com
Use the POSIX version of basename() to allow compilation against non-gnu
libc (e.g. musl). Include <libgen.h> ahead of <string.h> to enable using
functions from the latter while preferring POSIX over GNU basename().
In veristat.c, rely on strdupa() to avoid basename() altering the passed
"const char" argument. This is not needed in xskxceiver.c since the arg
is mutable and the program exits immediately after usage.
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/0fd3c9f3c605e6cba33504213c9df287817ade04.1722244708.git.tony.ambardar@gmail.com
Fixing ASSERT_OK condition check in uprobe_syscall test,
otherwise we return from test on pipe success.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240726180847.684584-1-jolsa@kernel.org
In prog_tests/test_global_maps_resize.c, we test various use cases for
resizing global maps. Commit 7244100e0389 ("libbpf: Don't take direct
pointers into BTF data from st_ops") updated libbpf to not store pointers
to volatile BTF data, which for some users, was causing a UAF when resizing
a datasec array.
Let's ensure we have coverage for resizing datasec arrays with struct_ops
progs by also including a struct_ops map and struct_ops prog in the
test_global_map_resize skeleton. The map is automatically loaded, so we
don't need to do anything other than add it to the BPF prog being tested
to get the coverage.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240725032214.50676-1-void@manifault.com
test_xdp_veth.sh tests that XDP return codes work as expected, by bringing
up multiple veth pairs isolated in different namespaces, attaching specific
xdp programs to each interface, and ensuring that the whole chain allows to
ping one end interface from the first one. The test runs well but is
currently not integrated in test_progs, which prevents it from being run
automatically in the CI infrastructure.
Rewrite it as a C test relying on libbpf to allow running it in the CI
infrastructure. The new code brings up the same network infrastructure and
reuses the same eBPF programs as test_xdp_veth.sh, for which skeletons are
already generated by the bpf tests makefile.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/bpf/20240721-convert_test_xdp_veth-v4-2-23bdba21b2f9@bootlin.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
xdp_redirect_map.c is a bpf program used by test_xdp_veth.sh, which is not
handled by the generic test runner (test_progs). To allow converting this
test to test_progs, the corresponding program must be updated to allow
handling it through skeletons generated by bpftool and libbpf.
Update programs section names to allow to manipulate those with libbpf.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/bpf/20240721-convert_test_xdp_veth-v4-1-23bdba21b2f9@bootlin.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Remove a redundant include of '<asm/types.h>', whose needed definitions are
already included (via '<linux/types.h>') in cg_storage_multi_egress_only.c,
cg_storage_multi_isolated.c, and cg_storage_multi_shared.c. This avoids
redefinition errors seen compiling for mips64el/musl-libc like:
In file included from progs/cg_storage_multi_egress_only.c:13:
In file included from progs/cg_storage_multi.h:6:
In file included from /usr/mips64el-linux-gnuabi64/include/asm/types.h:23:
/usr/include/asm-generic/int-l64.h:29:25: error: typedef redefinition with different types ('long' vs 'long long')
29 | typedef __signed__ long __s64;
| ^
/usr/include/asm-generic/int-ll64.h:30:44: note: previous definition is here
30 | __extension__ typedef __signed__ long long __s64;
| ^
Fixes: 9e5bd1f763 ("selftests/bpf: Test CGROUP_STORAGE map can't be used by multiple progs")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/4f4702e9f6115b7f84fea01b2326ca24c6df7ba8.1721713597.git.tony.ambardar@gmail.com
Remove a redundant include of '<linux/in6.h>', whose needed definitions are
already provided by 'test_progs.h'. This avoids errors seen compiling for
mips64el/musl-libc:
In file included from .../arpa/inet.h:9,
from ./test_progs.h:17,
from prog_tests/crypto_sanity.c:10:
.../netinet/in.h:23:8: error: redefinition of 'struct in6_addr'
23 | struct in6_addr {
| ^~~~~~~~
In file included from crypto_sanity.c:7:
.../linux/in6.h:33:8: note: originally defined here
33 | struct in6_addr {
| ^~~~~~~~
.../netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6'
34 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../linux/in6.h:50:8: note: originally defined here
50 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq'
42 | struct ipv6_mreq {
| ^~~~~~~~~
.../linux/in6.h:60:8: note: originally defined here
60 | struct ipv6_mreq {
| ^~~~~~~~~
Fixes: 91541ab192 ("selftests: bpf: crypto skcipher algo selftests")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/bpf/911293968f424ad7b462d8805aeb3baee8f4985b.1721713597.git.tony.ambardar@gmail.com
Remove a redundant include of '<linux/in6.h>', whose needed definitions are
already provided by 'test_progs.h'. This avoids errors seen compiling for
mips64el/musl-libc:
In file included from .../arpa/inet.h:9,
from ./test_progs.h:17,
from prog_tests/decap_sanity.c:9:
.../netinet/in.h:23:8: error: redefinition of 'struct in6_addr'
23 | struct in6_addr {
| ^~~~~~~~
In file included from decap_sanity.c:7:
.../linux/in6.h:33:8: note: originally defined here
33 | struct in6_addr {
| ^~~~~~~~
.../netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6'
34 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../linux/in6.h:50:8: note: originally defined here
50 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq'
42 | struct ipv6_mreq {
| ^~~~~~~~~
.../linux/in6.h:60:8: note: originally defined here
60 | struct ipv6_mreq {
| ^~~~~~~~~
Fixes: 70a00e2f1d ("selftests/bpf: Test bpf_skb_adjust_room on CHECKSUM_PARTIAL")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/e986ba2d7edccd254b54f7cd049b98f10bafa8c3.1721713597.git.tony.ambardar@gmail.com
Remove a redundant include of '<linux/icmp.h>' which is already provided in
'lwt_helpers.h'. This avoids errors seen compiling for mips64el/musl-libc:
In file included from .../arpa/inet.h:9,
from lwt_redirect.c:51:
.../netinet/in.h:23:8: error: redefinition of 'struct in6_addr'
23 | struct in6_addr {
| ^~~~~~~~
In file included from .../linux/icmp.h:24,
from lwt_redirect.c:50:
.../linux/in6.h:33:8: note: originally defined here
33 | struct in6_addr {
| ^~~~~~~~
.../netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6'
34 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../linux/in6.h:50:8: note: originally defined here
50 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq'
42 | struct ipv6_mreq {
| ^~~~~~~~~
.../linux/in6.h:60:8: note: originally defined here
60 | struct ipv6_mreq {
| ^~~~~~~~~
Fixes: 43a7c3ef8a ("selftests/bpf: Add lwt_xmit tests for BPF_REDIRECT")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/3869dda876d5206d2f8d4dd67331c739ceb0c7f8.1721713597.git.tony.ambardar@gmail.com
The type 'loff_t' is a GNU extension and not exposed by the musl 'fcntl.h'
header unless _GNU_SOURCE is defined. Add this definition to fix errors
seen compiling for mips64el/musl-libc:
In file included from tools/testing/selftests/bpf/prog_tests/core_reloc.c:4:
./bpf_testmod/bpf_testmod.h:10:9: error: unknown type name 'loff_t'
10 | loff_t off;
| ^~~~~~
./bpf_testmod/bpf_testmod.h:16:9: error: unknown type name 'loff_t'
16 | loff_t off;
| ^~~~~~
Fixes: 6bcd39d366 ("selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/11c3af75a7eb6bcb7ad9acfae6a6f470c572eb82.1721713597.git.tony.ambardar@gmail.com
The GNU version of 'struct tcp_info' in 'netinet/tcp.h' is not exposed by
musl headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
tcp_rtt.c: In function 'wait_for_ack':
tcp_rtt.c:24:25: error: storage size of 'info' isn't known
24 | struct tcp_info info;
| ^~~~
tcp_rtt.c:24:25: error: unused variable 'info' [-Werror=unused-variable]
cc1: all warnings being treated as errors
Fixes: 1f4f80fed2 ("selftests/bpf: test_progs: convert test_tcp_rtt")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/f2329767b15df206f08a5776d35a47c37da855ae.1721713597.git.tony.ambardar@gmail.com
The GNU version of 'struct tcphdr' has members 'doff', 'source' and 'dest',
which are not exposed by musl libc headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
flow_dissector.c:118:30: error: 'struct tcphdr' has no member named 'doff'
118 | .tcp.doff = 5,
| ^~~~
flow_dissector.c:119:30: error: 'struct tcphdr' has no member named 'source'
119 | .tcp.source = 80,
| ^~~~~~
flow_dissector.c:120:30: error: 'struct tcphdr' has no member named 'dest'
120 | .tcp.dest = 8080,
| ^~~~
Fixes: ae173a9157 ("selftests/bpf: support BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/8f7ab21a73f678f9cebd32b26c444a686e57414d.1721713597.git.tony.ambardar@gmail.com
The GNU version of 'struct tcphdr' with member 'doff' is not exposed by
musl headers unless _GNU_SOURCE is defined. Add this definition to fix
errors seen compiling for mips64el/musl-libc:
In file included from kfree_skb.c:2:
kfree_skb.c: In function 'on_sample':
kfree_skb.c:45:30: error: 'struct tcphdr' has no member named 'doff'
45 | if (CHECK(pkt_v6->tcp.doff != 5, "check_tcp",
| ^
Fixes: 580d656d80 ("selftests/bpf: Add kfree_skb raw_tp test")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/e2d8cedc790959c10d6822a51f01a7a3616bea1b.1721713597.git.tony.ambardar@gmail.com
The GNU version of 'struct tcphdr', with members 'doff' and 'urg_ptr', is
not exposed by musl headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
parse_tcp_hdr_opt.c:18:21: error: 'struct tcphdr' has no member named 'urg_ptr'
18 | .pk6_v6.tcp.urg_ptr = 123,
| ^~~~~~~
parse_tcp_hdr_opt.c:19:21: error: 'struct tcphdr' has no member named 'doff'
19 | .pk6_v6.tcp.doff = 9, /* 16 bytes of options */
| ^~~~
Fixes: cfa7b01189 ("selftests/bpf: tests for using dynptrs to parse skb and xdp buffers")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/ac5440213c242c62cb4e0d9e0a9cd5058b6a31f6.1721713597.git.tony.ambardar@gmail.com
Update ns_current_pid_tgid.c to use '#include <fcntl.h>' and avoid compile
error against mips64el/musl libc:
In file included from .../prog_tests/ns_current_pid_tgid.c:14:
.../include/sys/fcntl.h:1:2: error: #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> [-Werror=cpp]
1 | #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h>
| ^~~~~~~
cc1: all warnings being treated as errors
Fixes: 09c02d553c ("bpf, selftests: Fold test_current_pid_tgid_new_ns into test_progs.")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/8bdc869749177b575025bf69600a4ce591822609.1721713597.git.tony.ambardar@gmail.com
Explicitly include '<linux/build_bug.h>' to fix errors seen compiling with
gcc targeting mips64el/musl-libc:
user_ringbuf.c: In function 'test_user_ringbuf_loop':
user_ringbuf.c:426:9: error: implicit declaration of function 'BUILD_BUG_ON' [-Werror=implicit-function-declaration]
426 | BUILD_BUG_ON(total_samples <= c_max_entries);
| ^~~~~~~~~~~~
cc1: all warnings being treated as errors
Fixes: e5a9df51c7 ("selftests/bpf: Add selftests validating the user ringbuf")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/b28575f9221ec54871c46a2e87612bb4bbf46ccd.1721713597.git.tony.ambardar@gmail.com
Include <limits.h> in 'bench.h' to provide a UINT_MAX definition and avoid
multiple compile errors against mips64el/musl-libc like:
benchs/bench_local_storage.c: In function 'parse_arg':
benchs/bench_local_storage.c:40:38: error: 'UINT_MAX' undeclared (first use in this function)
40 | if (ret < 1 || ret > UINT_MAX) {
| ^~~~~~~~
benchs/bench_local_storage.c:11:1: note: 'UINT_MAX' is defined in header '<limits.h>'; did you forget to '#include <limits.h>'?
10 | #include <test_btf.h>
+++ |+#include <limits.h>
11 |
seen with bench_local_storage.c, bench_local_storage_rcu_tasks_trace.c, and
bench_bpf_hashmap_lookup.c.
Fixes: 7308748925 ("selftests/bpf: Add benchmark for local_storage get")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/8f64a9d9fcff40a7fca090a65a68a9b62a468e16.1721713597.git.tony.ambardar@gmail.com
Add a "bpf_util.h" include to avoid the following error seen compiling for
mips64el with musl libc:
bench.c: In function 'find_benchmark':
bench.c:590:25: error: implicit declaration of function 'ARRAY_SIZE' [-Werror=implicit-function-declaration]
590 | for (i = 0; i < ARRAY_SIZE(benchs); i++) {
| ^~~~~~~~~~
cc1: all warnings being treated as errors
Fixes: 8e7c2a023a ("selftests/bpf: Add benchmark runner infrastructure")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/bc4dde77dfcd17a825d8f28f72f3292341966810.1721713597.git.tony.ambardar@gmail.com
The addition of general support for unprivileged tests in test_loader.c
breaks building test_verifier on non-glibc (e.g. musl) systems, due to the
inclusion of glibc extension '<error.h>' in 'unpriv_helpers.c'. However,
the header is actually not needed, so remove it to restore building.
Similarly for sk_lookup.c and flow_dissector.c, error.h is not necessary
and causes problems, so drop them.
Fixes: 1d56ade032 ("selftests/bpf: Unprivileged tests for test_loader.c")
Fixes: 0ab5539f85 ("selftests/bpf: Tests for BPF_SK_LOOKUP attach point")
Fixes: 0905beec9f ("selftests/bpf: run flow dissector tests in skb-less mode")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/5664367edf5fea4f3f4b4aec3b182bcfc6edff9c.1721713597.git.tony.ambardar@gmail.com
Existing code calls getsockname() with a 'struct sockaddr_in6 *' argument
where a 'struct sockaddr *' argument is declared, yielding compile errors
when building for mips64el/musl-libc:
bpf_iter_setsockopt.c: In function 'get_local_port':
bpf_iter_setsockopt.c:98:30: error: passing argument 2 of 'getsockname' from incompatible pointer type [-Werror=incompatible-pointer-types]
98 | if (!getsockname(fd, &addr, &addrlen))
| ^~~~~
| |
| struct sockaddr_in6 *
In file included from .../netinet/in.h:10,
from .../arpa/inet.h:9,
from ./test_progs.h:17,
from bpf_iter_setsockopt.c:5:
.../sys/socket.h:391:23: note: expected 'struct sockaddr * restrict' but argument is of type 'struct sockaddr_in6 *'
391 | int getsockname (int, struct sockaddr *__restrict, socklen_t *__restrict);
| ^
cc1: all warnings being treated as errors
This compiled under glibc only because the argument is declared to be a
"funky" transparent union which includes both types above. Explicitly cast
the argument to allow compiling for both musl and glibc.
Fixes: eed92afdd1 ("bpf: selftest: Test batching and bpf_(get|set)sockopt in bpf tcp iter")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Geliang Tang <geliang@kernel.org>
Link: https://lore.kernel.org/bpf/f41def0f17b27a23b1709080e4e3f37f4cc11ca9.1721713597.git.tony.ambardar@gmail.com
Cast 'rlim_t' argument to match expected type of printf() format and avoid
compile errors seen building for mips64el/musl-libc:
In file included from map_tests/sk_storage_map.c:20:
map_tests/sk_storage_map.c: In function 'test_sk_storage_map_stress_free':
map_tests/sk_storage_map.c:414:56: error: format '%lu' expects argument of type 'long unsigned int', but argument 2 has type 'rlim_t' {aka 'long long unsigned int'} [-Werror=format=]
414 | CHECK(err, "setrlimit(RLIMIT_NOFILE)", "rlim_new:%lu errno:%d",
| ^~~~~~~~~~~~~~~~~~~~~~~
415 | rlim_new.rlim_cur, errno);
| ~~~~~~~~~~~~~~~~~
| |
| rlim_t {aka long long unsigned int}
./test_maps.h:12:24: note: in definition of macro 'CHECK'
12 | printf(format); \
| ^~~~~~
map_tests/sk_storage_map.c:414:68: note: format string is defined here
414 | CHECK(err, "setrlimit(RLIMIT_NOFILE)", "rlim_new:%lu errno:%d",
| ~~^
| |
| long unsigned int
| %llu
cc1: all warnings being treated as errors
Fixes: 51a0e301a5 ("bpf: Add BPF_MAP_TYPE_SK_STORAGE test to test_maps")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1e00a1fa7acf91b4ca135c4102dc796d518bad86.1721713597.git.tony.ambardar@gmail.com
Use pid_t rather than __pid_t when allocating memory for 'worker_pids' in
'struct test_env', as this is its declared type and also avoids compile
errors seen building against musl libc on mipsel64:
test_progs.c:1738:49: error: '__pid_t' undeclared (first use in this function); did you mean 'pid_t'?
1738 | env.worker_pids = calloc(sizeof(__pid_t), env.workers);
| ^~~~~~~
| pid_t
test_progs.c:1738:49: note: each undeclared identifier is reported only once for each function it appears in
Fixes: 91b2c0afd0 ("selftests/bpf: Add parallelism to test_progs")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Geliang Tang <geliang@kernel.org>
Link: https://lore.kernel.org/bpf/c6447da51a94babc1931711a43e2ceecb135c93d.1721713597.git.tony.ambardar@gmail.com
Tests for no_caller_saved_registers processing logic
(see verifier.c:match_and_mark_nocsr_pattern()):
- a canary positive test case;
- a canary test case for arm64 and riscv64;
- various tests with broken patterns;
- tests with read/write fixed/varying stack access that violate nocsr
stack access contract;
- tests with multiple subprograms;
- tests using nocsr in combination with may_goto/bpf_loop,
as all of these features affect stack depth;
- tests for nocsr stack spills below max stack depth.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240722233844.1406874-11-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Add annotations __arch_x86_64, __arch_arm64, __arch_riscv64
to specify on which architecture the test case should be tested.
Several __arch_* annotations could be specified at once.
When test case is not run on current arch it is marked as skipped.
For example, the following would be tested only on arm64 and riscv64:
SEC("raw_tp")
__arch_arm64
__arch_riscv64
__xlated("1: *(u64 *)(r10 - 16) = r1")
__xlated("2: call")
__xlated("3: r1 = *(u64 *)(r10 - 16);")
__success
__naked void canary_arm64_riscv64(void)
{
asm volatile (
"r1 = 1;"
"*(u64 *)(r10 - 16) = r1;"
"call %[bpf_get_smp_processor_id];"
"r1 = *(u64 *)(r10 - 16);"
"exit;"
:
: __imm(bpf_get_smp_processor_id)
: __clobber_all);
}
On x86 it would be skipped:
#467/2 verifier_nocsr/canary_arm64_riscv64:SKIP
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240722233844.1406874-10-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Add a macro __xlated("...") for use with test_loader tests.
When such annotations are present for the test case:
- bpf_prog_get_info_by_fd() is used to get BPF program after all
rewrites are applied by verifier.
- the program is disassembled and patterns specified in __xlated are
searched for in the disassembly text.
__xlated matching follows the same mechanics as __msg:
each subsequent pattern is matched from the point where
previous pattern ended.
This allows to write tests like below, where the goal is to verify the
behavior of one of the of the transformations applied by verifier:
SEC("raw_tp")
__xlated("1: w0 = ")
__xlated("2: r0 = &(void __percpu *)(r0)")
__xlated("3: r0 = *(u32 *)(r0 +0)")
__xlated("4: exit")
__success __naked void simple(void)
{
asm volatile (
"call %[bpf_get_smp_processor_id];"
"exit;"
:
: __imm(bpf_get_smp_processor_id)
: __clobber_all);
}
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240722233844.1406874-9-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Non-functional change: use a separate data structure to represented
expected messages in test_loader.
This would allow to use the same functionality for expected set of
disassembled instructions in the follow-up commit.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240722233844.1406874-8-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The call stack for validate_case() function looks as follows:
- test_loader__run_subtests()
- process_subtest()
- run_subtest()
- prepare_case(), which does 'tester->next_match_pos = 0';
- validate_case(), which increments tester->next_match_pos.
Hence, each subtest is run with next_match_pos freshly set to zero.
Meaning that there is no need to persist this variable in the
struct test_loader, use local variable instead.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240722233844.1406874-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Adjust disasm_helpers.c:disasm_insn() to account for the following
part of the verifier.c:jit_subprogs:
for (i = 0, insn = prog->insnsi; i < prog->len; i++, insn++) {
/* ... */
if (!bpf_pseudo_call(insn))
continue;
insn->off = env->insn_aux_data[i].call_imm;
subprog = find_subprog(env, i + insn->off + 1);
insn->imm = subprog;
}
Where verifier moves offset of the subprogram to the insn->off field.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240722233844.1406874-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
struct bpf_insn *disasm_insn(struct bpf_insn *insn, char *buf, size_t buf_sz);
Disassembles instruction 'insn' to a text buffer 'buf'.
Removes insn->code hex prefix added by kernel disassembly routine.
Returns a pointer to the next instruction
(increments insn by either 1 or 2).
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240722233844.1406874-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Add a few reg_bounds selftests to test 32/16/8-bit ldsx and subreg comparison.
Without the previous patch, all added tests will fail.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240723162940.2732171-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The following tests are added to verifier_ldsx.c:
- sign extension of data/data_end/data_meta for tcx programs.
The actual checking is in bpf_skb_is_valid_access() which
is called by sk_filter, cg_skb, lwt, tc(tcx) and sk_skb.
- sign extension of data/data_end/data_meta for xdp programs.
- sign extension of data/data_end for flow_dissector programs.
All newly-added tests have verification failure with message
"invalid bpf_context access". Without previous patch, all these
tests succeeded verification.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240723153444.2430365-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Make log output incorrectly shows 'test_maps' as the binary name for every
'CLNG-BPF' build step, apparently picking up the last value defined for the
$(TRUNNER_BINARY) variable. Update the 'CLANG_BPF_BUILD_RULE' variants to
fix this confusing output.
Current output:
CLNG-BPF [test_maps] access_map_in_map.bpf.o
GEN-SKEL [test_progs] access_map_in_map.skel.h
...
CLNG-BPF [test_maps] access_map_in_map.bpf.o
GEN-SKEL [test_progs-no_alu32] access_map_in_map.skel.h
...
CLNG-BPF [test_maps] access_map_in_map.bpf.o
GEN-SKEL [test_progs-cpuv4] access_map_in_map.skel.h
After fix:
CLNG-BPF [test_progs] access_map_in_map.bpf.o
GEN-SKEL [test_progs] access_map_in_map.skel.h
...
CLNG-BPF [test_progs-no_alu32] access_map_in_map.bpf.o
GEN-SKEL [test_progs-no_alu32] access_map_in_map.skel.h
...
CLNG-BPF [test_progs-cpuv4] access_map_in_map.bpf.o
GEN-SKEL [test_progs-cpuv4] access_map_in_map.skel.h
Fixes: a5d0c26a27 ("selftests/bpf: Add a cpuv4 test runner for cpu=v4 testing")
Fixes: 89ad7420b2 ("selftests/bpf: Drop the need for LLVM's llc")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240720052535.2185967-1-tony.ambardar@gmail.com
Adding test that attaches/detaches multiple consumers on
single uprobe and verifies all were hit as expected.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240722202758.3889061-3-jolsa@kernel.org
Without CONFIG_NET_FOU bpf selftests are unable to build because of
missing definitions. Add ___local versions of struct bpf_fou_encap and
enum bpf_fou_encap_type to fix the issue.
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240723071031.3389423-1-asavkov@redhat.com
Linking uprobe_multi.c on mips64el fails due to relocation overflows, when
the GOT entries required exceeds the default maximum. Add a specific CFLAGS
(-mxgot) for uprobe_multi.c on MIPS that allows using a larger GOT and
avoids errors such as:
/tmp/ccBTNQzv.o: in function `bench':
uprobe_multi.c:49:(.text+0x1d7720): relocation truncated to fit: R_MIPS_GOT_DISP against `uprobe_multi_func_08188'
uprobe_multi.c:49:(.text+0x1d7730): relocation truncated to fit: R_MIPS_GOT_DISP against `uprobe_multi_func_08189'
...
collect2: error: ld returned 1 exit status
Fixes: 519dfeaf51 ("selftests/bpf: Add uprobe_multi test program")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/14eb7b70f8ccef9834874d75eb373cb9292129da.1721692479.git.tony.ambardar@gmail.com
Update get_sys_includes in Makefile with missing MIPS-related definitions
to fix many, many compilation errors building selftests/bpf. The following
added defines drive conditional logic in system headers for word-size and
endianness selection:
MIPSEL, MIPSEB
_MIPS_SZPTR
_MIPS_SZLONG
_MIPS_SIM, _ABIO32, _ABIN32, _ABI64
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/f3cfceaf5299cdd2ac0e0a36072d6ca7be23e603.1721692479.git.tony.ambardar@gmail.com
Regular BPF hash map is not mmap-able from user space. However, map-in-map
with outer map of type BPF_MAP_TYPE_HASH_OF_MAPS and mmap-able array as
inner map can perform similar operations as a mmap-able hash map. This
can be used by applications that benefit from fast accesses to some local
data.
Add a selftest to show this use case.
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240723051455.1589192-1-song@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The helper start_server_addr() is a wrapper of __start_server(), the
only difference between them is __start_server() accepts a sockaddr type
address parameter, but start_server_addr() accepts a sockaddr_storage one.
This patch drops __start_server(), and updates the callers to invoke
start_server_addr() instead.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/31399df7cb957b7c233e79963b0aa0dc4278d273.1721475357.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
No need to use a dedicated helper inetaddr_len() to get the length of
the IPv4 or IPv6 address, it can be got by make_sockaddr(), this patch
drops it.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/32e2a4122921051da38a6e4fbb2ebee5f0af5a4e.1721475357.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
This patch uses the public network helers client_socket() + make_sockaddr()
in sk_lookup.c to create the client socket, set the timeout sockopts, and
make the connecting address. The local defined function make_socket()
can be dropped then.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/588771977ac48c27f73526d8421a84b91d7cf218.1721475357.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
This patch uses the new helper connect_to_addr_str() in sk_lookup.c to
create the client socket and connect to the server, instead of using local
defined function make_client(). This local function can be dropped then.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/058199d7ab46802249dae066ca22c98f6be508ee.1721475357.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
test_progs-no_alu32 -t libbpf_get_fd_by_id_opts
is being rejected by the verifier with the following error
due to compiler optimization:
6: (67) r0 <<= 62 ; R0_w=scalar(smax=0x4000000000000000,umax=0xc000000000000000,smin32=0,smax32=umax32=0,var_off=(0x0; 0xc000000000000000))
7: (c7) r0 s>>= 63 ; R0_w=scalar(smin=smin32=-1,smax=smax32=0)
; @ test_libbpf_get_fd_by_id_opts.c:0
8: (57) r0 &= -13 ; R0_w=scalar(smax=0x7ffffffffffffff3,umax=0xfffffffffffffff3,smax32=0x7ffffff3,umax32=0xfffffff3,var_off=(0x0; 0xfffffffffffffff3))
; int BPF_PROG(check_access, struct bpf_map *map, fmode_t fmode) @ test_libbpf_get_fd_by_id_opts.c:27
9: (95) exit
At program exit the register R0 has smax=9223372036854775795 should have been in [-4095, 0]
Workaround by adding barrier().
Eventually the verifier will be able to recognize it.
Fixes: 5d99e198be ("bpf, lsm: Add check for BPF LSM return value")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Jakub reports build failures when merging linux/master with net tree:
CXX test_cpp
In file included from <built-in>:454:
<command line>:2:9: error: '_GNU_SOURCE' macro redefined [-Werror,-Wmacro-redefined]
2 | #define _GNU_SOURCE
| ^
<built-in>:445:9: note: previous definition is here
445 | #define _GNU_SOURCE 1
The culprit is commit cc937dad85 ("selftests: centralize -D_GNU_SOURCE= to
CFLAGS in lib.mk") which unconditionally added -D_GNU_SOUCE to CLFAGS.
Apparently clang++ also unconditionally adds it for the C++ targets [0]
which causes a conflict. Add small change in the selftests makefile
to filter it out for test_cpp.
Not sure which tree it should go via, targeting bpf for now, but net
might be better?
0: https://stackoverflow.com/questions/11670581/why-is-gnu-source-defined-by-default-and-how-to-turn-it-off
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240725214029.1760809-1-sdf@fomichev.me
Add test for lsm tail call to ensure tail call can only be used between
bpf lsm progs attached to the same hook.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20240719110059.797546-9-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The return ranges of some bpf lsm test progs can not be deduced by
the verifier accurately. To avoid erroneous rejections, add explicit
return value checks for these progs.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20240719110059.797546-8-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
There is an existing "bpf_tcp_ca/unsupp_cong_op" test to ensure
the unsupported tcp-cc "get_info" struct_ops prog cannot be loaded.
This patch adds a new test in the bpf_testmod such that the
unsupported ops test does not depend on other kernel subsystem
where its supporting ops may be changed in the future.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240722183049.2254692-4-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The tramp_1 to tramp_40 ops is not set in the cfi_stubs in the
bpf_testmod_ops. It fails the struct_ops_multi_pages test after
retiring the unsupported_ops in the earlier patch.
This patch initializes them in a loop during the bpf_testmod_init().
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240722183049.2254692-3-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
find_equal_scalars() is renamed to sync_linked_regs(),
this commit updates existing references in the selftests comments.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240718202357.1746514-5-eddyz87@gmail.com
Add a few test cases to verify precision tracking for scalars gaining
range because of sync_linked_regs():
- check what happens when more than 6 registers might gain range in
sync_linked_regs();
- check if precision is propagated correctly when operand of
conditional jump gained range in sync_linked_regs() and one of
linked registers is marked precise;
- check if precision is propagated correctly when operand of
conditional jump gained range in sync_linked_regs() and a
other-linked operand of the conditional jump is marked precise;
- add a minimized reproducer for precision tracking bug reported in [0];
- Check that mark_chain_precision() for one of the conditional jump
operands does not trigger equal scalars precision propagation.
[0] https://lore.kernel.org/bpf/CAEf4BzZ0xidVCqB47XnkXcNhkPWF6_nTV7yt+_Lf0kcFEut2Mg@mail.gmail.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240718202357.1746514-4-eddyz87@gmail.com
Function mark_precise_scalar_ids() is superseded by
bt_sync_linked_regs() and equal scalars tracking in jump history.
mark_precise_scalar_ids() propagates precision over registers sharing
same ID on parent/child state boundaries, while jump history records
allow bt_sync_linked_regs() to propagate same information with
instruction level granularity, which is strictly more precise.
This commit removes mark_precise_scalar_ids() and updates test cases
in progs/verifier_scalar_ids to reflect new verifier behavior.
The tests are updated in the following manner:
- mark_precise_scalar_ids() propagated precision regardless of
presence of conditional jumps, while new jump history based logic
only kicks in when conditional jumps are present.
Hence test cases are augmented with conditional jumps to still
trigger precision propagation.
- As equal scalars tracking no longer relies on parent/child state
boundaries some test cases are no longer interesting,
such test cases are removed, namely:
- precision_same_state and precision_cross_state are superseded by
linked_regs_bpf_k;
- precision_same_state_broken_link and equal_scalars_broken_link
are superseded by linked_regs_broken_link.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240718202357.1746514-3-eddyz87@gmail.com
Use bpf_verifier_state->jmp_history to track which registers were
updated by find_equal_scalars() (renamed to collect_linked_regs())
when conditional jump was verified. Use recorded information in
backtrack_insn() to propagate precision.
E.g. for the following program:
while verifying instructions
1: r1 = r0 |
2: if r1 < 8 goto ... | push r0,r1 as linked registers in jmp_history
3: if r0 > 16 goto ... | push r0,r1 as linked registers in jmp_history
4: r2 = r10 |
5: r2 += r0 v mark_chain_precision(r0)
while doing mark_chain_precision(r0)
5: r2 += r0 | mark r0 precise
4: r2 = r10 |
3: if r0 > 16 goto ... | mark r0,r1 as precise
2: if r1 < 8 goto ... | mark r0,r1 as precise
1: r1 = r0 v
Technically, do this as follows:
- Use 10 bits to identify each register that gains range because of
sync_linked_regs():
- 3 bits for frame number;
- 6 bits for register or stack slot number;
- 1 bit to indicate if register is spilled.
- Use u64 as a vector of 6 such records + 4 bits for vector length.
- Augment struct bpf_jmp_history_entry with a field 'linked_regs'
representing such vector.
- When doing check_cond_jmp_op() remember up to 6 registers that
gain range because of sync_linked_regs() in such a vector.
- Don't propagate range information and reset IDs for registers that
don't fit in 6-value vector.
- Push a pair {instruction index, linked registers vector}
to bpf_verifier_state->jmp_history.
- When doing backtrack_insn() check if any of recorded linked
registers is currently marked precise, if so mark all linked
registers as precise.
This also requires fixes for two test_verifier tests:
- precise: test 1
- precise: test 2
Both tests contain the following instruction sequence:
19: (bf) r2 = r9 ; R2=scalar(id=3) R9=scalar(id=3)
20: (a5) if r2 < 0x8 goto pc+1 ; R2=scalar(id=3,umin=8)
21: (95) exit
22: (07) r2 += 1 ; R2_w=scalar(id=3+1,...)
23: (bf) r1 = r10 ; R1_w=fp0 R10=fp0
24: (07) r1 += -8 ; R1_w=fp-8
25: (b7) r3 = 0 ; R3_w=0
26: (85) call bpf_probe_read_kernel#113
The call to bpf_probe_read_kernel() at (26) forces r2 to be precise.
Previously, this forced all registers with same id to become precise
immediately when mark_chain_precision() is called.
After this change, the precision is propagated to registers sharing
same id only when 'if' instruction is backtracked.
Hence verification log for both tests is changed:
regs=r2,r9 -> regs=r2 for instructions 25..20.
Fixes: 904e6ddf41 ("bpf: Use scalar ids in mark_chain_precision()")
Reported-by: Hao Sun <sunhao.th@gmail.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240718202357.1746514-2-eddyz87@gmail.com
Closes: https://lore.kernel.org/bpf/CAEf4BzZ0xidVCqB47XnkXcNhkPWF6_nTV7yt+_Lf0kcFEut2Mg@mail.gmail.com/
Make use of -M compiler options when building .test.o objects to
generate .d files and avoid re-building all tests every time.
Previously, if a single test bpf program under selftests/bpf/progs/*.c
has changed, make would rebuild all the *.bpf.o, *.skel.h and *.test.o
objects, which is a lot of unnecessary work.
A typical dependency chain is:
progs/x.c -> x.bpf.o -> x.skel.h -> x.test.o -> trunner_binary
However for many tests it's not a 1:1 mapping by name, and so far
%.test.o have been simply dependent on all %.skel.h files, and
%.skel.h files on all %.bpf.o objects.
Avoid full rebuilds by instructing the compiler (via -MMD) to
produce *.d files with real dependencies, and appropriately including
them. Exploit make feature that rebuilds included makefiles if they
were changed by setting %.test.d as prerequisite for %.test.o files.
A couple of examples of compilation time speedup (after the first
clean build):
$ touch progs/verifier_and.c && time make -j8
Before: real 0m16.651s
After: real 0m2.245s
$ touch progs/read_vsyscall.c && time make -j8
Before: real 0m15.743s
After: real 0m1.575s
A drawback of this change is that now there is an overhead due to make
processing lots of .d files, which potentially may slow down unrelated
targets. However a time to make all from scratch hasn't changed
significantly:
$ make clean && time make -j8
Before: real 1m31.148s
After: real 1m30.309s
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/VJihUTnvtwEgv_mOnpfy7EgD9D2MPNoHO-MlANeLIzLJPGhDeyOuGKIYyKgk0O6KPjfM-MuhtvPwZcngN8WFqbTnTRyCSMc2aMZ1ODm1T_g=@pm.me
Similar to connect_to_addr() helper for connecting to a server with the
given sockaddr_storage type address, this patch adds a new helper named
connect_to_addr_str() for connecting to a server with the given string
type address "addr_str", together with its "family" and "port" as other
parameters of connect_to_addr_str().
In connect_to_addr_str(), the parameters "family", "addr_str" and "port"
are used to create a sockaddr_storage type address "addr" by invoking
make_sockaddr(). Then pass this "addr" together with "addrlen", "type"
and "opts" to connect_to_addr().
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/647e82170831558dbde132a7a3d86df660dba2c4.1721282219.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The struct member "must_fail" of network_helper_opts() is only used in
cgroup_v1v2 tests, it makes sense to drop it from network_helper_opts.
Return value (fd) of connect_to_fd_opts() and the expect errno (EPERM)
can be checked in cgroup_v1v2.c directly, no need to check them in
connect_fd_to_addr() in network_helpers.c.
This also makes connect_fd_to_addr() function useless. It can be replaced
by connect().
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/3faf336019a9a48e2e8951f4cdebf19e3ac6e441.1721282219.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The "type" parameter of connect_to_fd_opts() is redundant of "server_fd".
Since the "type" can be obtained inside by invoking getsockopt(SO_TYPE),
without passing it in as a parameter.
This patch drops the "type" parameter of connect_to_fd_opts() and updates
its callers.
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/50d8ce7ab7ab0c0f4d211fc7cc4ebe3d3f63424c.1721282219.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZqIl1AAKCRDbK58LschI
g/MdAP9oyZV9/IZ6Y6Z1fWfio0SB+yJGugcwbFjWcEtNrzsqJQEAwipQnemAI4NC
HBMfK2a/w7vhAFMXrP/SbkB/gUJJ7QE=
=vovf
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-07-25
We've added 14 non-merge commits during the last 8 day(s) which contain
a total of 19 files changed, 177 insertions(+), 70 deletions(-).
The main changes are:
1) Fix af_unix to disable MSG_OOB handling for sockets in BPF sockmap and
BPF sockhash. Also add test coverage for this case, from Michal Luczaj.
2) Fix a segmentation issue when downgrading gso_size in the BPF helper
bpf_skb_adjust_room(), from Fred Li.
3) Fix a compiler warning in resolve_btfids due to a missing type cast,
from Liwei Song.
4) Fix stack allocation for arm64 to align the stack pointer at a 16 byte
boundary in the fexit_sleep BPF selftest, from Puranjay Mohan.
5) Fix a xsk regression to require a flag when actuating tx_metadata_len,
from Stanislav Fomichev.
6) Fix function prototype BTF dumping in libbpf for prototypes that have
no input arguments, from Andrii Nakryiko.
7) Fix stacktrace symbol resolution in perf script for BPF programs
containing subprograms, from Hou Tao.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add XDP_UMEM_TX_METADATA_LEN to XSK TX metadata test
xsk: Require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len
bpf: Fix a segment issue when downgrading gso_size
tools/resolve_btfids: Fix comparison of distinct pointer types warning in resolve_btfids
bpf, events: Use prog to emit ksymbol event for main program
selftests/bpf: Test sockmap redirect for AF_UNIX MSG_OOB
selftests/bpf: Parametrize AF_UNIX redir functions to accept send() flags
selftests/bpf: Support SOCK_STREAM in unix_inet_redir_to_connected()
af_unix: Disable MSG_OOB handling for sockets in sockmap/sockhash
bpftool: Fix typo in usage help
libbpf: Fix no-args func prototype BTF dumping syntax
MAINTAINERS: Update powerpc BPF JIT maintainers
MAINTAINERS: Update email address of Naveen
selftests/bpf: fexit_sleep: Fix stack allocation for arm64
====================
Link: https://patch.msgid.link/20240725114312.32197-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This flag is now required to use tx_metadata_len.
Fixes: 40808a237d ("selftests/bpf: Add TX side to xdp_metadata")
Reported-by: Julian Schindel <mail@arctic-alpaca.de>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20240713015253.121248-3-sdf@fomichev.me
Uprobes:
- x86/shstk: Make return uprobe work with shadow stack.
- Add uretprobe syscall which speeds up the uretprobe 10-30% faster. This
syscall is automatically used from user-space trampolines which are
generated by the uretprobe. If this syscall is used by normal
user program, it will cause SIGILL. Note that this is currently only
implemented on x86_64.
(This also has 2 fixes for adjusting the syscall number to avoid conflict
with new *attrat syscalls.)
- uprobes/perf: fix user stack traces in the presence of pending uretprobe.
This corrects the uretprobe's trampoline address in the stacktrace with
correct return address.
- selftests/x86: Add a return uprobe with shadow stack test.
- selftests/bpf: Add uretprobe syscall related tests.
. test case for register integrity check.
. test case with register changing case.
. test case for uretprobe syscall without uprobes (expected to be failed).
. test case for uretprobe with shadow stack.
- selftests/bpf: add test validating uprobe/uretprobe stack traces
- MAINTAINERS: Add uprobes entry. This does not specify the tree but to
clarify who maintains and reviews the uprobes.
Kprobes:
- tracing/kprobes: Test case cleanups. Replace redundant WARN_ON_ONCE() +
pr_warn() with WARN_ONCE() and remove unnecessary code from selftest.
- tracing/kprobes: Add symbol counting check when module loads. This
checks the uniqueness of the probed symbol on modules. The same check
has already done for kernel symbols.
(This also has a fix for build error with CONFIG_MODULES=n)
Cleanup:
- Add MODULE_DESCRIPTION() macros for fprobe and kprobe examples.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmaWYxwbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bsUgH/3JcSzDZujQWCZ1f4fJn
QecvTFSYcCl6ck8+/3wm4EsgeCXIFOyPnoPc7k2Gm+l6Dlk1DKGV6wV4tuKFUq9X
9mplcwoVA0Ln+EX9zv9v4s99yUGxcU9xjgC9XT7J52SvqYncPIi6dR0Z9wlJBmyd
Bx3cZk+wSzCYaoqYngI2fKlzsEcYgDIP999fQPRi0HGzNZujc4xeJyjCTC/48yWO
9kreRQq6wFdgRQTwMcR/fKPDKIGZQCU8jkXv5crVV5K3rNaBcwBmCJJMP8PzPU0V
UQ0+8RZK+Qk8SBwXcMNVRqm/efTderob4IYxP8OBe5wjAIE7+vu8r6sqwxRIS54M
Cyg=
=DRSr
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
"Uprobes:
- x86/shstk: Make return uprobe work with shadow stack
- Add uretprobe syscall which speeds up the uretprobe 10-30% faster.
This syscall is automatically used from user-space trampolines
which are generated by the uretprobe. If this syscall is used by
normal user program, it will cause SIGILL. Note that this is
currently only implemented on x86_64.
(This also has two fixes for adjusting the syscall number to avoid
conflict with new *attrat syscalls.)
- uprobes/perf: fix user stack traces in the presence of pending
uretprobe. This corrects the uretprobe's trampoline address in the
stacktrace with correct return address
- selftests/x86: Add a return uprobe with shadow stack test
- selftests/bpf: Add uretprobe syscall related tests.
- test case for register integrity check
- test case with register changing case
- test case for uretprobe syscall without uprobes (expected to fail)
- test case for uretprobe with shadow stack
- selftests/bpf: add test validating uprobe/uretprobe stack traces
- MAINTAINERS: Add uprobes entry. This does not specify the tree but
to clarify who maintains and reviews the uprobes
Kprobes:
- tracing/kprobes: Test case cleanups.
Replace redundant WARN_ON_ONCE() + pr_warn() with WARN_ONCE() and
remove unnecessary code from selftest
- tracing/kprobes: Add symbol counting check when module loads.
This checks the uniqueness of the probed symbol on modules. The
same check has already done for kernel symbols
(This also has a fix for build error with CONFIG_MODULES=n)
Cleanup:
- Add MODULE_DESCRIPTION() macros for fprobe and kprobe examples"
* tag 'probes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
MAINTAINERS: Add uprobes entry
selftests/bpf: Change uretprobe syscall number in uprobe_syscall test
uprobe: Change uretprobe syscall scope and number
tracing/kprobes: Fix build error when find_module() is not available
tracing/kprobes: Add symbol counting check when module loads
selftests/bpf: add test validating uprobe/uretprobe stack traces
perf,uprobes: fix user stack traces in the presence of pending uretprobes
tracing/kprobe: Remove cleanup code unrelated to selftest
tracing/kprobe: Integrate test warnings into WARN_ONCE
selftests/bpf: Add uretprobe shadow stack test
selftests/bpf: Add uretprobe syscall call from user space test
selftests/bpf: Add uretprobe syscall test for regs changes
selftests/bpf: Add uretprobe syscall test for regs integrity
selftests/x86: Add return uprobe shadow stack test
uprobe: Add uretprobe syscall to speed up return probe
uprobe: Wire up uretprobe system call
x86/shstk: Make return uprobe work with shadow stack
samples: kprobes: add missing MODULE_DESCRIPTION() macros
fprobe: add missing MODULE_DESCRIPTION() macro
Verify that out-of-band packets are silently dropped before they reach the
redirection logic.
The idea is to test with a 2 byte long send(). Should a MSG_OOB flag be in
use, only the last byte will be treated as out-of-band. Test fails if
verd_mapfd indicates a wrong number of packets processed (e.g. if OOB
wasn't dropped at the source) or if it was possible to recv() MSG_OOB from
the mapped socket, or if any stale OOB data have been left reachable from
the unmapped socket.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20240713200218.2140950-5-mhal@rbox.co
Extend pairs_redir_to_connected() and unix_inet_redir_to_connected() with a
send_flags parameter. Replace write() with send() allowing packets to be
sent as MSG_OOB.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20240713200218.2140950-4-mhal@rbox.co
Function ignores the AF_UNIX socket type argument, SOCK_DGRAM is hardcoded.
Fix to respect the argument provided.
Fixes: 75e0e27db6 ("selftest/bpf: Change udp to inet in some function names")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20240713200218.2140950-3-mhal@rbox.co
For all these years libbpf's BTF dumper has been emitting not strictly
valid syntax for function prototypes that have no input arguments.
Instead of `int (*blah)()` we should emit `int (*blah)(void)`.
This is not normally a problem, but it manifests when we get kfuncs in
vmlinux.h that have no input arguments. Due to compiler internal
specifics, we get no BTF information for such kfuncs, if they are not
declared with proper `(void)`.
The fix is trivial. We also need to adjust a few ancient tests that
happily assumed `()` is correct.
Fixes: 351131b51c ("libbpf: add btf_dump API for BTF-to-C conversion")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/bpf/20240712224442.282823-1-andrii@kernel.org
On ARM64 the stack pointer should be aligned at a 16 byte boundary or
the SPAlignmentFault can occur. The fexit_sleep selftest allocates the
stack for the child process as a character array, this is not guaranteed
to be aligned at 16 bytes.
Because of the SPAlignmentFault, the child process is killed before it
can do the nanosleep call and hence fentry_cnt remains as 0. This causes
the main thread to hang on the following line:
while (READ_ONCE(fexit_skel->bss->fentry_cnt) != 2);
Fix this by allocating the stack using mmap() as described in the
example in the man page of clone().
Remove the fexit_sleep test from the DENYLIST of arm64.
Fixes: eddbe8e652 ("selftest/bpf: Add a test to check trampoline freeing logic.")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240715173327.8657-1-puranjay@kernel.org
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZpGVmAAKCRDbK58LschI
gxB4AQCgquQis63yqTI36j4iXBT+TuxHEBNoQBSLyzYdrLS1dgD/S5DRJDA+3LD+
394hn/VtB1qvX5vaqjsov4UIwSMyxA0=
=OhSn
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-07-12
We've added 23 non-merge commits during the last 3 day(s) which contain
a total of 18 files changed, 234 insertions(+), 243 deletions(-).
The main changes are:
1) Improve BPF verifier by utilizing overflow.h helpers to check
for overflows, from Shung-Hsi Yu.
2) Fix NULL pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT
when attr->attach_prog_fd was not specified, from Tengda Wu.
3) Fix arm64 BPF JIT when generating code for BPF trampolines with
BPF_TRAMP_F_CALL_ORIG which corrupted upper address bits,
from Puranjay Mohan.
4) Remove test_run callback from lwt_seg6local_prog_ops which never worked
in the first place and caused syzbot reports,
from Sebastian Andrzej Siewior.
5) Relax BPF verifier to accept non-zero offset on KF_TRUSTED_ARGS/
/KF_RCU-typed BPF kfuncs, from Matt Bobrowski.
6) Fix a long standing bug in libbpf with regards to handling of BPF
skeleton's forward and backward compatibility, from Andrii Nakryiko.
7) Annotate btf_{seq,snprintf}_show functions with __printf,
from Alan Maguire.
8) BPF selftest improvements to reuse common network helpers in sk_lookup
test and dropping the open-coded inetaddr_len() and make_socket() ones,
from Geliang Tang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (23 commits)
selftests/bpf: Test for null-pointer-deref bugfix in resolve_prog_type()
bpf: Fix null pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT
selftests/bpf: DENYLIST.aarch64: Skip fexit_sleep again
bpf: use check_sub_overflow() to check for subtraction overflows
bpf: use check_add_overflow() to check for addition overflows
bpf: fix overflow check in adjust_jmp_off()
bpf: Eliminate remaining "make W=1" warnings in kernel/bpf/btf.o
bpf: annotate BTF show functions with __printf
bpf, arm64: Fix trampoline for BPF_TRAMP_F_CALL_ORIG
selftests/bpf: Close obj in error path in xdp_adjust_tail
selftests/bpf: Null checks for links in bpf_tcp_ca
selftests/bpf: Use connect_fd_to_fd in sk_lookup
selftests/bpf: Use start_server_addr in sk_lookup
selftests/bpf: Use start_server_str in sk_lookup
selftests/bpf: Close fd in error path in drop_on_reuseport
selftests/bpf: Add ASSERT_OK_FD macro
selftests/bpf: Add backlog for network_helper_opts
selftests/bpf: fix compilation failure when CONFIG_NF_FLOW_TABLE=m
bpf: Remove tst_run from lwt_seg6local_prog_ops.
bpf: relax zero fixed offset constraint on KF_TRUSTED_ARGS/KF_RCU
...
====================
Link: https://patch.msgid.link/20240712212448.5378-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This test verifies that resolve_prog_type() works as expected when
`attach_prog_fd` is not passed in.
`prog->aux->dst_prog` in resolve_prog_type() is assigned by
`attach_prog_fd`, and would be NULL if `attach_prog_fd` is not provided.
Loading EXT prog with bpf_dynptr_from_skb() kfunc call in this way will
lead to null-pointer-deref.
Verify that the null-pointer-deref bug in resolve_prog_type() is fixed.
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240711145819.254178-3-wutengda@huaweicloud.com
Revert commit 90dc946059 ("selftests/bpf: DENYLIST.aarch64: Remove
fexit_sleep") again. The fix in 19d3c179a3 ("bpf, arm64: Fix trampoline
for BPF_TRAMP_F_CALL_ORIG") does not address all of the issues and BPF
CI is still hanging and timing out:
https://github.com/kernel-patches/bpf/actions/runs/9905842936/job/27366435436
[...]
#89/11 fexit_bpf2bpf/func_replace_global_func:OK
#89/12 fexit_bpf2bpf/fentry_to_cgroup_bpf:OK
#89/13 fexit_bpf2bpf/func_replace_progmap:OK
#89 fexit_bpf2bpf:OK
Error: The operation was canceled.
Thus more investigation work & fixing is needed before the test can be put
in place again.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/bpf/20240705145009.32340-1-puranjay@kernel.org
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/act_ct.c
26488172b0 ("net/sched: Fix UAF when resolving a clash")
3abbd7ed8b ("act_ct: prepare for stolen verdict coming from conntrack and nat engine")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest that tries to trigger a situation where two timer callbacks
are attempting to cancel each other's timer. By running them continuously,
we hit a condition where both run in parallel and cancel each other.
Without the fix in the previous patch, this would cause a lockup as
hrtimer_cancel on either side will wait for forward progress from the
callback.
Ensure that this situation leads to a EDEADLK error.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240711052709.2148616-1-memxor@gmail.com
If bpf_object__load() fails in test_xdp_adjust_frags_tail_grow(), "obj"
opened before this should be closed. So use "goto out" to close it instead
of using "return" here.
Fixes: 110221081a ("bpf: selftests: update xdp_adjust_tail selftest to include xdp frags")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/f282a1ed2d0e3fb38cceefec8e81cabb69cab260.1720615848.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Run bpf_tcp_ca selftests (./test_progs -t bpf_tcp_ca) on a Loongarch
platform, some "Segmentation fault" errors occur:
'''
test_dctcp:PASS:bpf_dctcp__open_and_load 0 nsec
test_dctcp:FAIL:bpf_map__attach_struct_ops unexpected error: -524
#29/1 bpf_tcp_ca/dctcp:FAIL
test_cubic:PASS:bpf_cubic__open_and_load 0 nsec
test_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524
#29/2 bpf_tcp_ca/cubic:FAIL
test_dctcp_fallback:PASS:dctcp_skel 0 nsec
test_dctcp_fallback:PASS:bpf_dctcp__load 0 nsec
test_dctcp_fallback:FAIL:dctcp link unexpected error: -524
#29/4 bpf_tcp_ca/dctcp_fallback:FAIL
test_write_sk_pacing:PASS:open_and_load 0 nsec
test_write_sk_pacing:FAIL:attach_struct_ops unexpected error: -524
#29/6 bpf_tcp_ca/write_sk_pacing:FAIL
test_update_ca:PASS:open 0 nsec
test_update_ca:FAIL:attach_struct_ops unexpected error: -524
settcpca:FAIL:setsockopt unexpected setsockopt: \
actual -1 == expected -1
(network_helpers.c:99: errno: No such file or directory) \
Failed to call post_socket_cb
start_test:FAIL:start_server_str unexpected start_server_str: \
actual -1 == expected -1
test_update_ca:FAIL:ca1_ca1_cnt unexpected ca1_ca1_cnt: \
actual 0 <= expected 0
#29/9 bpf_tcp_ca/update_ca:FAIL
#29 bpf_tcp_ca:FAIL
Caught signal #11!
Stack trace:
./test_progs(crash_handler+0x28)[0x5555567ed91c]
linux-vdso.so.1(__vdso_rt_sigreturn+0x0)[0x7ffffee408b0]
./test_progs(bpf_link__update_map+0x80)[0x555556824a78]
./test_progs(+0x94d68)[0x5555564c4d68]
./test_progs(test_bpf_tcp_ca+0xe8)[0x5555564c6a88]
./test_progs(+0x3bde54)[0x5555567ede54]
./test_progs(main+0x61c)[0x5555567efd54]
/usr/lib64/libc.so.6(+0x22208)[0x7ffff2aaa208]
/usr/lib64/libc.so.6(__libc_start_main+0xac)[0x7ffff2aaa30c]
./test_progs(_start+0x48)[0x55555646bca8]
Segmentation fault
'''
This is because BPF trampoline is not implemented on Loongarch yet,
"link" returned by bpf_map__attach_struct_ops() is NULL. test_progs
crashs when this NULL link passes to bpf_link__update_map(). This
patch adds NULL checks for all links in bpf_tcp_ca to fix these errors.
If "link" is NULL, goto the newly added label "out" to destroy the skel.
v2:
- use "goto out" instead of "return" as Eduard suggested.
Fixes: 06da9f3bd6 ("selftests/bpf: Test switching TCP Congestion Control algorithms.")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/b4c841492bd4ed97964e4e61e92827ce51bf1dc9.1720615848.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch uses public helper connect_fd_to_fd() exported in
network_helpers.h instead of using getsockname() + connect() in
run_lookup_prog() in prog_tests/sk_lookup.c. This can simplify
the code.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/7077c277cde5a1864cdc244727162fb75c8bb9c5.1720515893.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch uses public helper start_server_addr() in udp_recv_send()
in prog_tests/sk_lookup.c to simplify the code.
And use ASSERT_OK_FD() to check fd returned by start_server_addr().
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/f11cabfef4a2170ecb66a1e8e2e72116d8f621b3.1720515893.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch uses public helper start_server_str() to simplify make_server()
in prog_tests/sk_lookup.c.
Add a callback setsockopts() to do all sockopts, set it to post_socket_cb
pointer of struct network_helper_opts. And add a new struct cb_opts to save
the data needed to pass to the callback. Then pass this network_helper_opts
to start_server_str().
Also use ASSERT_OK_FD() to check fd returned by start_server_str().
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/5981539f5591d2c4998c962ef2bf45f34c940548.1720515893.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
In the error path when update_lookup_map() fails in drop_on_reuseport in
prog_tests/sk_lookup.c, "server1", the fd of server 1, should be closed.
This patch fixes this by using "goto close_srv1" lable instead of "detach"
to close "server1" in this case.
Fixes: 0ab5539f85 ("selftests/bpf: Tests for BPF_SK_LOOKUP attach point")
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/86aed33b4b0ea3f04497c757845cff7e8e621a2d.1720515893.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add a new dedicated ASSERT macro ASSERT_OK_FD to test whether a socket
FD is valid or not. It can be used to replace macros ASSERT_GT(fd, 0, ""),
ASSERT_NEQ(fd, -1, "") or statements (fd < 0), (fd != -1).
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/ded75be86ac630a3a5099739431854c1ec33f0ea.1720515893.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Some callers expect __start_server() helper to pass their own "backlog"
value to listen() instead of the default of 1. So this patch adds struct
member "backlog" for network_helper_opts to allow callers to set "backlog"
value via start_server_str() helper.
listen(fd, 0 /* backlog */) can be used to enforce syncookie. Meaning
backlog 0 is a legit value.
Using 0 as a default and changing it to 1 here is fine. It makes the test
program easier to write for the common case. Enforcing syncookie mode by
using backlog 0 is a niche use case but it should at least have a way for
the caller to do that. Thus, -ve backlog value is used here for the
syncookie use case. Please see the comment in network_helpers.h for
the details.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/1660229659b66eaad07aa2126e9c9fe217eba0dd.1720515893.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
In many cases, kernel netfilter functionality is built as modules.
If CONFIG_NF_FLOW_TABLE=m in particular, progs/xdp_flowtable.c
(and hence selftests) will fail to compile, so add a ___local
version of "struct flow_ports".
Fixes: c77e572d3a ("selftests/bpf: Add selftest for bpf_xdp_flow_lookup kfunc")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20240710150051.192598-1-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, BPF kfuncs which accept trusted pointer arguments
i.e. those flagged as KF_TRUSTED_ARGS, KF_RCU, or KF_RELEASE, all
require an original/unmodified trusted pointer argument to be supplied
to them. By original/unmodified, it means that the backing register
holding the trusted pointer argument that is to be supplied to the BPF
kfunc must have its fixed offset set to zero, or else the BPF verifier
will outright reject the BPF program load. However, this zero fixed
offset constraint that is currently enforced by the BPF verifier onto
BPF kfuncs specifically flagged to accept KF_TRUSTED_ARGS or KF_RCU
trusted pointer arguments is rather unnecessary, and can limit their
usability in practice. Specifically, it completely eliminates the
possibility of constructing a derived trusted pointer from an original
trusted pointer. To put it simply, a derived pointer is a pointer
which points to one of the nested member fields of the object being
pointed to by the original trusted pointer.
This patch relaxes the zero fixed offset constraint that is enforced
upon BPF kfuncs which specifically accept KF_TRUSTED_ARGS, or KF_RCU
arguments. Although, the zero fixed offset constraint technically also
applies to BPF kfuncs accepting KF_RELEASE arguments, relaxing this
constraint for such BPF kfuncs has subtle and unwanted
side-effects. This was discovered by experimenting a little further
with an initial version of this patch series [0]. The primary issue
with relaxing the zero fixed offset constraint on BPF kfuncs accepting
KF_RELEASE arguments is that it'd would open up the opportunity for
BPF programs to supply both trusted pointers and derived trusted
pointers to them. For KF_RELEASE BPF kfuncs specifically, this could
be problematic as resources associated with the backing pointer could
be released by the backing BPF kfunc and cause instabilities for the
rest of the kernel.
With this new fixed offset semantic in-place for BPF kfuncs accepting
KF_TRUSTED_ARGS and KF_RCU arguments, we now have more flexibility
when it comes to the BPF kfuncs that we're able to introduce moving
forward.
Early discussions covering the possibility of relaxing the zero fixed
offset constraint can be found using the link below. This will provide
more context on where all this has stemmed from [1].
Notably, pre-existing tests have been updated such that they provide
coverage for the updated zero fixed offset
functionality. Specifically, the nested offset test was converted from
a negative to positive test as it was already designed to assert zero
fixed offset semantics of a KF_TRUSTED_ARGS BPF kfunc.
[0] https://lore.kernel.org/bpf/ZnA9ndnXKtHOuYMe@google.com/
[1] https://lore.kernel.org/bpf/ZhkbrM55MKQ0KeIV@google.com/
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240709210939.1544011-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZoxN0AAKCRDbK58LschI
g0c5AQDa3ZV9gfbN42y1zSDoM1uOgO60fb+ydxyOYh8l3+OiQQD/fLfpTY3gBFSY
9yi/pZhw/QdNzQskHNIBrHFGtJbMxgs=
=p1Zz
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-07-08
The following pull-request contains BPF updates for your *net-next* tree.
We've added 102 non-merge commits during the last 28 day(s) which contain
a total of 127 files changed, 4606 insertions(+), 980 deletions(-).
The main changes are:
1) Support resilient split BTF which cuts down on duplication and makes BTF
as compact as possible wrt BTF from modules, from Alan Maguire & Eduard Zingerman.
2) Add support for dumping kfunc prototypes from BTF which enables both detecting
as well as dumping compilable prototypes for kfuncs, from Daniel Xu.
3) Batch of s390x BPF JIT improvements to add support for BPF arena and to implement
support for BPF exceptions, from Ilya Leoshkevich.
4) Batch of riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter, from Pu Lehui.
5) Extend BPF test infrastructure to add a CHECKSUM_COMPLETE validation option
for skbs and add coverage along with it, from Vadim Fedorenko.
6) Inline bpf_get_current_task/_btf() helpers in the arm64 BPF JIT which gives
a small 1% performance improvement in micro-benchmarks, from Puranjay Mohan.
7) Extend the BPF verifier to track the delta between linked registers in order
to better deal with recent LLVM code optimizations, from Alexei Starovoitov.
8) Fix bpf_wq_set_callback_impl() kfunc signature where the third argument should
have been a pointer to the map value, from Benjamin Tissoires.
9) Extend BPF selftests to add regular expression support for test output matching
and adjust some of the selftest when compiled under gcc, from Cupertino Miranda.
10) Simplify task_file_seq_get_next() and remove an unnecessary loop which always
iterates exactly once anyway, from Dan Carpenter.
11) Add the capability to offload the netfilter flowtable in XDP layer through
kfuncs, from Florian Westphal & Lorenzo Bianconi.
12) Various cleanups in networking helpers in BPF selftests to shave off a few
lines of open-coded functions on client/server handling, from Geliang Tang.
13) Properly propagate prog->aux->tail_call_reachable out of BPF verifier, so
that x86 JIT does not need to implement detection, from Leon Hwang.
14) Fix BPF verifier to add a missing check_func_arg_reg_off() to prevent an
out-of-bounds memory access for dynpointers, from Matt Bobrowski.
15) Fix bpf_session_cookie() kfunc to return __u64 instead of long pointer as
it might lead to problems on 32-bit archs, from Jiri Olsa.
16) Enhance traffic validation and dynamic batch size support in xsk selftests,
from Tushar Vyavahare.
bpf-next-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (102 commits)
selftests/bpf: DENYLIST.aarch64: Remove fexit_sleep
selftests/bpf: amend for wrong bpf_wq_set_callback_impl signature
bpf: helpers: fix bpf_wq_set_callback_impl signature
libbpf: Add NULL checks to bpf_object__{prev_map,next_map}
selftests/bpf: Remove exceptions tests from DENYLIST.s390x
s390/bpf: Implement exceptions
s390/bpf: Change seen_reg to a mask
bpf: Remove unnecessary loop in task_file_seq_get_next()
riscv, bpf: Optimize stack usage of trampoline
bpf, devmap: Add .map_alloc_check
selftests/bpf: Remove arena tests from DENYLIST.s390x
selftests/bpf: Add UAF tests for arena atomics
selftests/bpf: Introduce __arena_global
s390/bpf: Support arena atomics
s390/bpf: Enable arena
s390/bpf: Support address space cast instruction
s390/bpf: Support BPF_PROBE_MEM32
s390/bpf: Land on the next JITed instruction after exception
s390/bpf: Introduce pre- and post- probe functions
s390/bpf: Get rid of get_probe_mem_regno()
...
====================
Link: https://patch.msgid.link/20240708221438.10974-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
fexit_sleep test runs successfully now on the BPF CI so remove it
from the deny list. ftrace direct calls was blocking tracing programs
on arm64 but it has been resolved by now. For more details see also
discussion in [*].
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240705145009.32340-1-puranjay@kernel.org [*]
See the previous patch: the API was wrong, we were provided the pointer
to the value, not the actual struct bpf_wq *.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240708-fix-wq-v2-2-667e5c9fbd99@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Check that __sync_*() functions don't cause kernel panics when handling
freed arena pages.
x86_64 does not support some arena atomics yet, and aarch64 may or may
not support them, based on the availability of LSE atomics at run time.
Do not enable this test for these architectures for simplicity.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-12-iii@linux.ibm.com
While clang uses __attribute__((address_space(1))) both for defining
arena pointers and arena globals, GCC requires different syntax for
both. While __arena covers the first use case, introduce __arena_global
to cover the second one.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240701234304.14336-11-iii@linux.ibm.com
Add testcase where 7th argument is struct for architectures with 8 argument
registers, and increase the complexity of the struct.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240702121944.1091530-4-pulehui@huaweicloud.com
Factor out many args tests from tracing_struct and rename some function names
to make more sense. Meanwhile, remove unnecessary skeleton detach operation
as it will be covered by skeleton destroy operation.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240702121944.1091530-3-pulehui@huaweicloud.com
Introduce dynamic adjustment capabilities for fill_size and comp_size
parameters to support larger batch sizes beyond the previous 2K limit.
Update HW_SW_MAX_RING_SIZE test cases to evaluate AF_XDP's robustness by
pushing hardware and software ring sizes to their limits. This test
ensures AF_XDP's reliability amidst potential producer/consumer throttling
due to maximum ring utilization.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20240702055916.48071-3-tushar.vyavahare@intel.com
Previously, HW_SW_MIN_RING_SIZE and HW_SW_MAX_RING_SIZE test cases were
not validating Tx/Rx traffic at all due to early return after changing HW
ring size in testapp_validate_traffic().
Fix the flow by checking return value of set_ring_size() and act upon it
rather than terminating the test case there.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20240702055916.48071-2-tushar.vyavahare@intel.com
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
e3f02f32a0 ("ionic: fix kernel panic due to multi-buffer handling")
d9c0420999 ("ionic: Mark error paths in the data path as unlikely")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ARRAY_SIZE is used on multiple places, move its definition in
bpf_misc.h header.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20240626134719.3893748-1-jolsa@kernel.org
Add new negative selftests which are intended to cover the
out-of-bounds memory access that could be performed on a
CONST_PTR_TO_DYNPTR within functions taking a ARG_PTR_TO_DYNPTR |
MEM_RDONLY as an argument, and acceptance of invalid register types
i.e. PTR_TO_BTF_ID within functions taking a ARG_PTR_TO_DYNPTR |
MEM_RDONLY.
Reported-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Link: https://lore.kernel.org/r/20240625062857.92760-2-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a set of tests to validate that stack traces captured from or in the
presence of active uprobes and uretprobes are valid and complete.
For this we use BPF program that are installed either on entry or exit
of user function, plus deep-nested USDT. One of target funtions
(target_1) is recursive to generate two different entries in the stack
trace for the same uprobe/uretprobe, testing potential edge conditions.
If there is no fixes, we get something like this for one of the scenarios:
caller: 0x758fff - 0x7595ab
target_1: 0x758fd5 - 0x758fff
target_2: 0x758fca - 0x758fd5
target_3: 0x758fbf - 0x758fca
target_4: 0x758fb3 - 0x758fbf
ENTRY #0: 0x758fb3 (in target_4)
ENTRY #1: 0x758fd3 (in target_2)
ENTRY #2: 0x758ffd (in target_1)
ENTRY #3: 0x7fffffffe000
ENTRY #4: 0x7fffffffe000
ENTRY #5: 0x6f8f39
ENTRY #6: 0x6fa6f0
ENTRY #7: 0x7f403f229590
Entry #3 and #4 (0x7fffffffe000) are uretprobe trampoline addresses
which obscure actual target_1 and another target_1 invocations. Also
note that between entry #0 and entry #1 we are missing an entry for
target_3.
With fixes, we get desired full stack traces:
caller: 0x758fff - 0x7595ab
target_1: 0x758fd5 - 0x758fff
target_2: 0x758fca - 0x758fd5
target_3: 0x758fbf - 0x758fca
target_4: 0x758fb3 - 0x758fbf
ENTRY #0: 0x758fb7 (in target_4)
ENTRY #1: 0x758fc8 (in target_3)
ENTRY #2: 0x758fd3 (in target_2)
ENTRY #3: 0x758ffd (in target_1)
ENTRY #4: 0x758ff3 (in target_1)
ENTRY #5: 0x75922c (in caller)
ENTRY #6: 0x6f8f39
ENTRY #7: 0x6fa6f0
ENTRY #8: 0x7f986adc4cd0
Now there is a logical and complete sequence of function calls.
Link: https://lore.kernel.org/all/20240522013845.1631305-5-andrii@kernel.org/
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
add simple kfuncs to create/destroy a context type to bpf_testmod,
register them and add a kfunc_call test to use them. This provides
test coverage for registration of dtor kfuncs from modules.
By transferring the context pointer to a map value as a __kptr
we also trigger the map-based dtor cleanup logic, improving test
coverage.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240620091733.1967885-7-alan.maguire@oracle.com
Adding selftest to verify that struct_ops maps are auto attached by
bpf skeleton's `*__attach` function.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240621180324.238379-1-yatsenko@meta.com
This patch changes a few tests to make use of regular expressions.
Fixed tests otherwise fail when compiled with GCC.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240617141458.471620-3-cupertino.miranda@oracle.com
Add support for __regex and __regex_unpriv macros to check the test
execution output against a regular expression. This is similar to __msg
and __msg_unpriv, however those expect do substring matching.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240617141458.471620-2-cupertino.miranda@oracle.com
This reverts [1] and changes return value for bpf_session_cookie
in bpf selftests. Having long * might lead to problems on 32-bit
architectures.
Fixes: 2b8dd87332 ("bpf: Make bpf_session_cookie() kfunc return long *")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240619081624.1620152-1-jolsa@kernel.org
Since start_server_str() is added now, it can be used in mptcp.c in
start_mptcp_server() instead of using helpers make_sockaddr() and
start_server_addr() to simplify the code.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/16fb3e2cd60b64b5470b0e69f1aa233feaf2717c.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In test_bpf_ip_check_defrag_ok(), the new helper client_socket() can be
used to replace connect_to_fd_opts() with "noconnect" opts, and the strcut
member "noconnect" of network_helper_opts can be dropped now, always
connect to server in connect_to_fd_opts().
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/f45760becce51986e4e08283c7df0f933eb0da14.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch extracts a new helper client_socket() from connect_to_fd_opts()
to create the client socket, but don't connect to the server. Then
connect_to_fd_opts() can be implemented using client_socket() and
connect_fd_to_addr(). This helper can be used in connect_to_addr() too,
and make "noconnect" opts useless.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/4169c554e1cee79223feea49a1adc459d55e1ffe.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch moves "post_socket_cb" and "noconnect" into connect_to_addr(),
then connect_to_fd_opts() can be implemented by getsockname() and
connect_to_addr(). This change makes connect_to_* interfaces more unified.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/4569c30533e14c22fae6c05070aad809720551c1.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The opts.{type, noconnect} is at least a bit non intuitive or unnecessary.
The only use case now is in test_bpf_ip_check_defrag_ok which ends up
bypassing most (or at least some) of the connect_to_fd_opts() logic. It's
much better that test should have its own connect_to_fd_opts() instead.
This patch adds a new "type" parameter for connect_to_fd_opts(), then
opts->type and getsockopt(SO_TYPE) can be replaced by "type" parameter in
it.
In connect_to_fd(), use getsockopt(SO_TYPE) to get "type" value and pass
it to connect_to_fd_opts().
In bpf_tcp_ca.c and cgroup_v1v2.c, "SOCK_STREAM" types are passed to
connect_to_fd_opts(), and in ip_check_defrag.c, different types "SOCK_RAW"
and "SOCK_DGRAM" are passed to it.
With these changes, the strcut member "type" of network_helper_opts can be
dropped now.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/cfd20b5ad4085c1d1af5e79df3b09013a407199f.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
1e7962114c ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error")
165f87691a ("bnxt_en: add timestamping statistics support")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ensure relocated BTF looks as expected; in this case identical to
original split BTF, with a few duplicate anonymous types added to
split BTF by the relocation process. Also add relocation tests
for edge cases like missing type in base BTF and multiple types
of the same name.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240613095014.357981-5-alan.maguire@oracle.com
Test generation of split+distilled base BTF, ensuring that
- named base BTF STRUCTs and UNIONs are represented as 0-vlen sized
STRUCT/UNIONs
- named ENUM[64]s are represented as 0-vlen named ENUM[64]s
- anonymous struct/unions are represented in full in split BTF
- anonymous enums are represented in full in split BTF
- types unreferenced from split BTF are not present in distilled
base BTF
Also test that with vmlinux BTF and split BTF based upon it,
we only represent needed base types referenced from split BTF
in distilled base.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240613095014.357981-3-alan.maguire@oracle.com
Add three unit tests in verifier_movsx.c to cover
cases where missed var_off setting can cause
unexpected verification success or failure.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240615174637.3995589-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Improve arena based tests and add several C and asm tests
with specific pattern.
These tests would have failed without add_const verifier support.
Also add several loop_inside_iter*() tests that are not related to add_const,
but nice to have.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240613013815.953-5-alexei.starovoitov@gmail.com
