mirror of
https://github.com/torvalds/linux.git
synced 2026-07-27 17:47:41 +02:00
master
1609 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
f31c00c377 |
platform-drivers-x86 for v7.2-1
Highlights:
- amd/hfi: Add support for dynamic ranking tables (version 3)
- amd/pmc:
- Add PMC driver support for AMD 1Ah M80H SoC
- Delay suspend for some Lenovo Laptops to avoid keyboard and lid
switch problems after s2idle
- arm64: qcom-hamoa-ec: Add Hamoa/Purwa/Glymur EC driver
- asus-armoury: add support for G614PR, GA402NJ, GA403UM, and FX608JPR
- asus-wmi: add keystone dongle support
- dell-dw5826e: Add reset driver for DW5826e
- dell-laptop: Fix rollback path
- hp-wmi:
- Add support for Omen 16-ap0xxx (board ID 8D26) and board ID 8B2F
- intel-hid:
- Add HP ProBook x360 440 G1 5 button array support
- Prevent racing ACPI notify handlers
- intel/pmc:
- Add Nova Lake support
- Rate-limit LTR scale-factor warning
- intel-uncore-freq:
- Expose instance ID in the sysfs
- Fix current_freq_khz after CPU hotplug
- intel/vsec: Restore BAR fallback for header walk
- ISST: Restore SST-PP control to all domains
- lenovo-wmi-*:
- Add more CPU tunable attributes
- Add GPU tunable attributes
- Add WMI battery charge limiting
- oxpec: add support for OneXPlayer Super X
- sel3350-platform: Retain LED state on load and unload
- surface: SAM: Add support for Surface Pro 12in
- uniwill-laptop: Add support for battery charge modes
- tools/power/x86/intel-speed-select: Harden daemon pidfile open
- Major refactoring efforts:
- ACPI driver to platform driver conversion
- Converting drivers to use the improved WMI API
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
ACPI:
- provide acpi_bus_find_device_by_name()
alienware-wmi-base:
- Transition to new WMI API
amd: hfi:
- Support for ranking table versions
amd/hsmp:
- Clamp ioctl/send_message indices (Spectre v1)
amd/pmc:
- Add delay_suspend module parameter
- Add PMC driver support for AMD 1Ah M80H SoC
- Check for intermediate wakeup in function
- Delay suspend for some Lenovo Laptops
- Don't log during intermediate wakeups
- Use per-SoC cpu_info struct for SMU mailbox and IP info
apple-gmux:
- Drop unused assignment of pnp_device_id driver data
arm64:
- Add driver for EC found on Qualcomm reference devices
arm64: qcom-hamoa-ec:
- Fix indentation in comment tables
arm64 Use named initializers for struct i2c_device_id:
- arm64 Use named initializers for struct i2c_device_id
asus-armoury:
- add support for FX608JPR
- add support for G614PR
- add support for GA402NJ
- add support for GA403UM
asus-wmi:
- add keystone dongle support
barco-p50-gpio:
- attach software node to its target GPIO device
classmate-laptop:
- Address memory leaks on driver removal
- Convert accel driver to a platform one
- Convert ipml driver to a platform one
- Convert keys driver to a platform one
- Convert tablet driver to a platform one
- Convert v4 accel driver to a platform one
- Pass struct device pointer to helpers
- Register ACPI notify handlers directly
- Rename two helper functions
- Unify probe rollback and remove code
dell-ddv:
- Use new buffer-based WMI API
dell-descriptor:
- Use new buffer-based WMI API
dell-dw5826e:
- Add reset driver for DW5826e
dell-laptop:
- add Inspiron N5110 to touchpad LED quirk table
- fix missing cleanups in init error path
dell-privacy:
- correct CONFIG_DELL_WMI_PRIVACY macro name in comments
- Use new buffer-based WMI API
dell_rbu:
- use strscpy in image_type_write
dell-smbios-wmi:
- Use new buffer-based WMI API
dell-wmi-base:
- Use new buffer-based WMI API
docs:
- fix typo in uniwill-laptop.rst
hp-wmi:
- Add support for Omen 16-ap0xxx (8D26)
- Add support for Omen 16-ap0xxx (8E35)
- Add thermal support for board 8B2F
hwmon:
- (dell-smm) Use new buffer-based WMI API
intel-hid:
- Add HP ProBook x360 440 G1 to button_array_table
- Protect ACPI notify handler against recursion
intel/pmc:
- Add ACPI PWRM telemetry driver for Nova Lake S
- Add Nova Lake support to intel_pmc_core driver
- Add NVL PCI IDs for SSRAM telemetry discovery
- Add PMC SSRAM Kconfig description
- Add support for variable DMU offsets
- Enable Pkgc blocking residency counter
- Enable PkgC LTR blocking counter
- rate-limit LTR scale-factor warning
- Retrieve PMC info only for available PMCs
intel/pmc/ssram:
- Add ACPI discovery scaffolding
- Add PCI platform data
- Make PMT registration optional
- Refactor DEVID/PWRMBASE extraction into helper
- Rename probe and PCI ID table for consistency
- Switch to static array with per-index probe state
intel/pmc:
- Use __free() in pmc_core_punit_pmt_init()
- Use PCI DID for PMC SSRAM device discovery
intel/pmt:
- Add pre/post decode hooks around header parsing
- Cache the telemetry discovery header
intel/pmt/crashlog:
- Split init into pre-decode
intel/pmt:
- Pass discovery index instead of resource
intel/pmt/telemetry:
- Move overlap check to post-decode hook
intel/pmt:
- Unify header fetch and add ACPI source
intel/tpmi:
- convert mutex in mem_write() to guard
- use cleanup helpers in mem_write()
intel-uncore-freq:
- Expose instance ID in the sysfs
- Fix current_freq_khz after CPU hotplug
- Rename instance_id
intel/vsec:
- allocate res with intel_vsec_dev
- Restore BAR fallback for header walk
ISST:
- Restore SST-PP control to all domains
lenovo-wmi-capdata:
- Add debugfs file for dumping capdata
lenovo-wmi-helpers:
- Add helper for creating per-device debugfs dir
lenovo-wmi-other:
- Add force_load_psy_ext module parameter
- Add GPU tunable attributes
- Add missing CPU tunable attributes
- Add WMI battery charge limiting
- Rename LWMI_OM_FW_ATTR_BASE_PATH
meraki-mx100:
- use real software node references
modpost:
- Handle malformed WMI GUID strings
Move delayed work on system_dfl_wq:
- Move delayed work on system_dfl_wq
msi-ec:
- Add support for MSI Pulse GL66 12th Gen
oxpec:
- add support for OneXPlayer Super X
panasonic-laptop:
- simplify allocation of sinf
pcengines-apuv2:
- reduce indiraction in swnode assignment
pmc_atom:
- Use named initializer for pci_device_id array
sel3350-platform:
- Retain LED state on load and unload
sonypi:
- use strscpy() in sonypi_acpi_probe
surface: SAM:
- Add support for Surface Pro 12in
thinkpad_acpi:
- Add debugfs entry to display HWDD raw
- Remove unneeded goto
tools/power/x86/intel-speed-select:
- Harden daemon pidfile open
uniwill-laptop:
- Add support for battery charge modes
- Enable battery charge modes on supported devices
- Mark EC_ADDR_OEM_4 as volatile
- Rework FN lock/super key suspend handling
use u8 * for raw byte buffers:
- use u8 * for raw byte buffers
wmi:
- Make sysfs attributes const
- Make wmi_bus_class const
x86-android-tablets:
- enable fwnode matching of GPIO chips
- Use named initializers for struct i2c_device_id
x86/platform/olpc: xo15:
- Convert ACPI driver to a platform one
- Drop wakeup source on driver removal
xo15-ebook:
- Convert ACPI driver to a platform one
- Fix formatting of labels
- Fix wakeup source and GPE handling
- Register ACPI notify handler directly
- Use devres-based resource management
Merges:
- Merge branch 'fixes' into for-next
- Merge branch 'fixes' of into for-next
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into review-ilpo-next
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCajl8LgAKCRBZrE9hU+XO
MZ47AP0Z0IoiT8WEcXL4wuTQyR6ruXWClYk82wiroAFEko8Z5AD/WYNWCBXqjZk+
FlJbtleRLA/ADmgT3Mj+biHNTIqyBA0=
=Q3d+
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/hfi: Add support for dynamic ranking tables (version 3)
- amd/pmc:
- Add PMC driver support for AMD 1Ah M80H SoC
- Delay suspend for some Lenovo Laptops to avoid keyboard and lid
switch problems after s2idle
- arm64: qcom-hamoa-ec: Add Hamoa/Purwa/Glymur EC driver
- asus-armoury: add support for G614PR, GA402NJ, GA403UM, and FX608JPR
- asus-wmi: add keystone dongle support
- dell-dw5826e: Add reset driver for DW5826e
- dell-laptop: Fix rollback path
- hp-wmi:
- Add support for Omen 16-ap0xxx (board ID 8D26) and board ID 8B2F
- intel-hid:
- Add HP ProBook x360 440 G1 5 button array support
- Prevent racing ACPI notify handlers
- intel/pmc:
- Add Nova Lake support
- Rate-limit LTR scale-factor warning
- intel-uncore-freq:
- Expose instance ID in the sysfs
- Fix current_freq_khz after CPU hotplug
- intel/vsec: Restore BAR fallback for header walk
- ISST: Restore SST-PP control to all domains
- lenovo-wmi-*:
- Add more CPU tunable attributes
- Add GPU tunable attributes
- Add WMI battery charge limiting
- oxpec: add support for OneXPlayer Super X
- sel3350-platform: Retain LED state on load and unload
- surface: SAM: Add support for Surface Pro 12in
- uniwill-laptop: Add support for battery charge modes
- tools/power/x86/intel-speed-select: Harden daemon pidfile open
- Major refactoring efforts:
- ACPI driver to platform driver conversion
- Converting drivers to use the improved WMI API
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (115 commits)
platform/x86/intel/pmc: Add NVL PCI IDs for SSRAM telemetry discovery
platform/x86/intel/pmc/ssram: Make PMT registration optional
platform/x86/intel/pmc/ssram: Add ACPI discovery scaffolding
platform/x86/intel/pmc/ssram: Switch to static array with per-index probe state
platform/x86/intel/pmc/ssram: Refactor DEVID/PWRMBASE extraction into helper
platform/x86/intel/pmc/ssram: Add PCI platform data
platform/x86/intel/pmc/ssram: Rename probe and PCI ID table for consistency
platform/x86/intel/pmc: Add ACPI PWRM telemetry driver for Nova Lake S
platform/x86/intel/pmc: Add PMC SSRAM Kconfig description
platform/x86/intel/pmt: Unify header fetch and add ACPI source
platform/x86/intel/pmt: Cache the telemetry discovery header
platform/x86/intel/pmt: Pass discovery index instead of resource
platform/x86/intel/pmt/telemetry: Move overlap check to post-decode hook
platform/x86/intel/pmt/crashlog: Split init into pre-decode
platform/x86/intel/pmt: Add pre/post decode hooks around header parsing
modpost: Handle malformed WMI GUID strings
platform/wmi: Make sysfs attributes const
platform/wmi: Make wmi_bus_class const
hwmon: (dell-smm) Use new buffer-based WMI API
platform/x86: dell-ddv: Use new buffer-based WMI API
...
|
||
|
Linus Torvalds
|
5504ce0317 |
Power management updates for 7.2-rc1
- Fix a race between cpufreq suspend and CPU hotplug during system
shutdown (Tianxiang Chen)
- Avoid redundant target() calls for unchanged limits and fix a typo
in a comment in the cpufreq core (Viresh Kumar)
- Fix concurrency issues related to sysfs attributes access that affect
cpufreq governors using the common governor code (Zhongqiu Han)
- Simplify frequency limit handling in the conservative cpufreq
governor (Lifeng Zheng)
- Fix descriptions of the conservative governor freq_step tunable and
the ondemand governor sampling_down_factor tunable in the cpufreq
documentation (Pengjie Zhang)
- Fix use-after-free and double free during _OSC evaluation in the PCC
cpufreq driver (Yuho Choi)
- Rework the handling of policy min and max frequency values in the
cpufreq core to allow drivers to specify special initial values for
the scaling_min_freq and scaling_max_freq sysfs attributes (Pierre
Gondois)
- Add cpufreq scaling support for Qualcomm Shikra SoC (Taniya Das,
Imran Shaik).
- Improve the warning message on HWP-disabled hybrid processors printed
by the intel_pstate driver and sync policy->cur during CPU offline in
it (Yohei Kojima, Fushuai Wang)
- Drop cpufreq support for AMD Elan SC4* (Sean Young)
- Minor fixes for cpufreq drivers (Krzysztof Kozlowski, Akashdeep Kaur,
Hans Zhang, Guangshuo Li, Xueqin Luo)
- Clean up dead dependencies on X86 in the cpufreq Kconfig (Julian
Braha)
- Allow the intel_idle driver to avoid exposing C-states that are
redundant when PC6 is disabled (Artem Bityutskiy)
- Fix memory leak and a potential race in the OPP core (Abdun Nihaal,
Di Shen)
- Mark Rust OPP methods as inline (Nicolás Antinori)
- Fix misc device registration failure path in the PM QoS core (Yuho
Choi)
- Add sysctl interface for DPM watchdog timeouts (Tzung-Bi Shih)
- Use complete() instead of complete_all() in device_pm_sleep_init() to
avoid a false-positive warning from lockdep_assert_RT_in_threaded_ctx()
when CONFIG_PROVE_RAW_LOCK_NESTING is enabled (Jiakai Xu)
- Use a flexible array for CRC uncompressed buffers during hibernation
image saving (Rosen Penev)
- Make the LZ4 algorithm available for hibernation compression (l1rox3)
- Move the preallocate_image() call during hibernation after the
"prepare" phase of the "freeze" transition (Matthew Leach)
- Fix a memory leak in rapl_add_package_cpuslocked() in the intel_rapl
power capping driver and use sysfs_emit() in cpumask_show() in that
driver (Sumeet Pawnikar, Yury Norov)
- Fix ValueError when parsing incomplete device properties in the
pm-graph utility (Gongwei Li)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmor9R8SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1ODoIAInJsQeeWGXfUq4hAFnoA/gtS2oBw7Kw
QVjoGG/DUbM/+ZtlbUee27pqvaYRY+q/Tv9RWKkl5vckASPFIAgCjImbm0g3P7Rz
9OgoBwppqv0Yn5whFgc7nt9jOa7FQKV+jHiJgzRqwMxDFLkk0LldYVzsYpB6m+Lx
Kca0LBeSv8o16EZX7RChC+6W7E5UhGxekSg9AzMPJTCe0gKciwARYiBhbSU5nAlI
WdL5j+ycR3QTApbHA2tueaPKa1qnomLwJscmsE6UxlbikfcCBFZ9EvIsBnwl1WM4
EcPA57IAYcr29N9Cdh/cs6MFkpWdzDBOs/ECZsgdI6fUWniQrPINThI=
=oafL
-----END PGP SIGNATURE-----
Merge tag 'pm-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"Over a half of the changes here are cpufreq updates that include core
modifications, fixes of the old-style governors, new hardware support
in drivers, assorded driver fixes and cleanups, and the removal of one
driver (AMD Elan SC4*).
Apart from that, the intel_idle driver will now be able to avoid
exposing redundant C-states if PC6 is disabled and there are new
sysctl knobs for device suspend/resume watchdog timeouts, hibernation
gets built-in LZ4 support for image compression and there is the usual
collection of assorted fixes and cleanups.
Specifics:
- Fix a race between cpufreq suspend and CPU hotplug during system
shutdown (Tianxiang Chen)
- Avoid redundant target() calls for unchanged limits and fix a typo
in a comment in the cpufreq core (Viresh Kumar)
- Fix concurrency issues related to sysfs attributes access that
affect cpufreq governors using the common governor code (Zhongqiu
Han)
- Simplify frequency limit handling in the conservative cpufreq
governor (Lifeng Zheng)
- Fix descriptions of the conservative governor freq_step tunable and
the ondemand governor sampling_down_factor tunable in the cpufreq
documentation (Pengjie Zhang)
- Fix use-after-free and double free during _OSC evaluation in the
PCC cpufreq driver (Yuho Choi)
- Rework the handling of policy min and max frequency values in the
cpufreq core to allow drivers to specify special initial values for
the scaling_min_freq and scaling_max_freq sysfs attributes (Pierre
Gondois)
- Add cpufreq scaling support for Qualcomm Shikra SoC (Taniya Das,
Imran Shaik).
- Improve the warning message on HWP-disabled hybrid processors
printed by the intel_pstate driver and sync policy->cur during CPU
offline in it (Yohei Kojima, Fushuai Wang)
- Drop cpufreq support for AMD Elan SC4* (Sean Young)
- Minor fixes for cpufreq drivers (Krzysztof Kozlowski, Akashdeep
Kaur, Hans Zhang, Guangshuo Li, Xueqin Luo)
- Clean up dead dependencies on X86 in the cpufreq Kconfig (Julian
Braha)
- Allow the intel_idle driver to avoid exposing C-states that are
redundant when PC6 is disabled (Artem Bityutskiy)
- Fix memory leak and a potential race in the OPP core (Abdun Nihaal,
Di Shen)
- Mark Rust OPP methods as inline (Nicolás Antinori)
- Fix misc device registration failure path in the PM QoS core (Yuho
Choi)
- Add sysctl interface for DPM watchdog timeouts (Tzung-Bi Shih)
- Use complete() instead of complete_all() in device_pm_sleep_init()
to avoid a false-positive warning from lockdep_assert_RT_in_threaded_ctx()
when CONFIG_PROVE_RAW_LOCK_NESTING is enabled (Jiakai Xu)
- Use a flexible array for CRC uncompressed buffers during
hibernation image saving (Rosen Penev)
- Make the LZ4 algorithm available for hibernation compression
(l1rox3)
- Move the preallocate_image() call during hibernation after the
"prepare" phase of the "freeze" transition (Matthew Leach)
- Fix a memory leak in rapl_add_package_cpuslocked() in the
intel_rapl power capping driver and use sysfs_emit() in
cpumask_show() in that driver (Sumeet Pawnikar, Yury Norov)
- Fix ValueError when parsing incomplete device properties in the
pm-graph utility (Gongwei Li)"
* tag 'pm-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm: (40 commits)
PM: dpm_watchdog: Add sysctl interface for DPM watchdog timeouts
PM: QoS: Fix misc device registration unwind
cpufreq: Use policy->min/max init as QoS request
cpufreq: Remove driver default policy->min/max init
cpufreq: Set default policy->min/max values for all drivers
cpufreq: Extract cpufreq_policy_init_qos() function
cpufreq: Documentation: fix conservative governor freq_step description
cpufreq: ti: Add EPROBE_DEFER for K3 SoCs
cpufreq: qcom: Add cpufreq scaling support for Qualcomm Shikra SoC
dt-bindings: cpufreq: Document Qualcomm Shikra SoC EPSS
powercap: intel_rapl: Use sysfs_emit() in cpumask_show()
cpufreq: governor: Fix stale prev_cpu_nice spike when enabling ignore_nice_load
cpufreq: governor: Fix data races on per-CPU idle/nice baselines
PM: hibernate: Use flexible array for CRC uncompressed buffers
powercap: intel_rapl: Fix memory leak in rapl_add_package_cpuslocked()
PM: hibernate: make LZ4 available for hibernation compression
PM: sleep: Use complete() in device_pm_sleep_init()
opp: rust: mark OPP methods as inline
cpufreq: intel_pstate: Improve warning message on HWP-disabled hybrid CPUs
cpufreq: elanfreq: Drop support for AMD Elan SC4*
...
|
||
|
Ali Ahmet MEMIS
|
607af438e6 |
tools/power/x86/intel-speed-select: Harden daemon pidfile open
Avoid symlink-based pidfile clobbering by opening the pidfile with
O_NOFOLLOW and validating it with fstat() before locking/writing.
The daemon currently uses a fixed pidfile path under /tmp. A local
unprivileged user can pre-create a symlink at that path and cause a
root-run daemon instance to write into an attacker-chosen file.
Fixes:
|
||
|
Pawel Chmielewski
|
6ce2d03bb8 |
ACPICA: Update the copyright year to 2026
Update copyright notices in all ACPICA files. Link: https://github.com/acpica/acpica/commit/9def02549a9c Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/4379132.1IzOArtZ34@rafael.j.wysocki |
||
|
Gongwei Li
|
c7c3a6476e |
PM: tools: pm-graph: fix ValueError when parsing incomplete device properties
When parsing device properties from ftrace data, the devprops() function
assumes that each line has at least three fields and that the third field
(f[2]) always contains a valid integer. However, due to incomplete or
corrupted ftrace logs, f[2] may be missing, empty, or non-existent.
This can lead to the following error:
Traceback (most recent call last):
File "../sleepgraph.py", line 7142, in <module>
stamp = rerunTest(sysvals.outdir)
File "../sleepgraph.py", line 6255, in rerunTest
testruns, stamp = processData()
File "../sleepgraph.py", line 6181, in processData
testruns, error = parseTraceLog(live)
File "../sleepgraph.py", line 3470, in parseTraceLog
tp, tf = loadTraceLog()
File "../sleepgraph.py", line 3398, in loadTraceLog
if tp.stampInfo(line, sysvals):
File "../sleepgraph.py", line 3073, in stampInfo
self.parsePlatformInfo(line, sv)
File "../sleepgraph.py", line 3177, in parsePlatformInfo
sv.devprops = self.devprops(sv.b64unzip(info))
File "../sleepgraph.py", line 3158, in devprops
if int(f[2]):
ValueError: invalid literal for int() with base 10: ''
To prevent this crash, add proper validation before accessing.
Signed-off-by: Gongwei Li <ligongwei@kylinos.cn>
Acked-by: Todd Brandt <todd.e.brandt@intel.com>
[ rjw: Subject tweak ]
Link: https://patch.msgid.link/20260424071208.3610628-1-13875017792@163.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
||
|
Linus Torvalds
|
2ff1bc41ef |
Power Utilities 2026.04.25
tools/power x86_energy_perf_policy: v2026.04.25 Since v2025.11.22: Initial SoC Slider support tools/power turbostat: v2026.04.21 Since v2026.02.14 Display HT siblings in cpu# order. Add Module-ID column. Print Core-ID and APIC-ID in hex. Fix misc bugs. -----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEE67dNfPFP+XUaA73mB9BFOha3NhcFAmntCF8UHGxlbi5icm93 bkBpbnRlbC5jb20ACgkQB9BFOha3NhdonBAAvVjW218opQ91NRnwX++PKgggSrxN r9Vyo+ZFAI5gcHuvjHdew3cLr1gjb9Ty0a9FDOYE0a6Encl3v7DgaS9IxLCCDUcV 9YYscLhbQdY+6teIacCXwxibWvYVrpuRW8Mfr5nRMC5ftmZ0fMuoVhPwgX40NMgk 3bbawrC0RoXgivZiF8tNZlAKdtyYAs2k46jEUGoy7aiezV1XGU0J7kU3usLP3BeE kB3Q6CzgQcn0fSGm4Lc899DzcFwbVIJtpAB9jcGcqme6Okk2Kw8uH8vjQrPFnMUD K08PX987z+U9y+NTR+IW6H+T1DmnBikoBH5ibdSrox5yI9VgCUFL1X65cUt2amgZ IQwoZcvDbmGzSC+C3qylsdGRl/Al5zIdv2dPey+NGvZmnhFbFtWnfSoj0zeRyiqY M368EplGh64venFYn0vyf5AAJhZMQztjEKXkyARUtLPZVnDFzGcqbRozKkMP2siz CrY8gS54s4wtj5zlA/8On007tO5mCVaBimcikgjPHi+W3jHFaCasOyxG7O49EEJ3 6qbtChQFYlrexT/cjyHR4KLPWnN288HiQ09oCffSxr2MMn6Hcds+ixW06VZJfUd1 wVbG7+CmcJEcX+oSEz80CpguUKMWRUlqGpHBtO16LF6in+9d7ugvlbG20kypVSBI 8E291PTXqlzHEvg= =5yb/ -----END PGP SIGNATURE----- Merge tag 'power-utilities-2026.04.25' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull power utility updates from Len Brown: "x86_energy_perf_policy: - Initial SoC Slider support turbostat: - Display HT siblings in cpu# order - Add Module-ID column - Print Core-ID and APIC-ID in hex - Fix misc bugs" * tag 'power-utilities-2026.04.25' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power x86_energy_perf_policy: Version 2026.04.25 tools/power x86_energy_perf_policy.8: Document SoC Slider Options tools/power x86_energy_perf_policy: Enhances SoC Slider related checks tools/power turbostat: v2026.04.21 tools/power turbostat: Process HT siblings in CPU order tools/power turbostat: Show module_id column tools/power turbostat: Print core_id and apic_id in hex tools/power turbostat: Cleanup print helper functions tools/power turbostat: Fix --cpu-set 1 regression on HT systems tools/power turbostat: Fix --cpu-set 0 regression on HT systems tools/power turbostat: Fix unrecognized option '-P' tools/power turbostat: Fix AMD RAPL regression on big systems tools/power/x86: Add SOC slider and platform profile support |
||
|
Len Brown
|
6112da1ea4 | Merge branches 'turbostat' and 'x86_energy_perf_policy' into power-utilities | ||
|
Len Brown
|
f1c35c7319 |
tools/power x86_energy_perf_policy: Version 2026.04.25
Since v2025.11.22: Initial SoC Slider support SoC Slider is an SoC-wide power/performance policy setting. On SoC Slider systems, EPP plays a diminished role. Whitespace cleanup via: indent -npro -kr -i8 -ts8 -sob -l160 -ss -ncs -cp1 No functional changes Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Len Brown
|
18c5b9ea4e |
tools/power x86_energy_perf_policy.8: Document SoC Slider Options
x86_energy_perf_policy accesses the SoC Slider via standard user/kernel APIs to the processor_thermal_soc_slider driver. Machines that support SoC Slider largely use it instead of EPP, which may continue to exist in a diminished role, or vanish entirely. Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Len Brown
|
25ff5848c0 |
tools/power x86_energy_perf_policy: Enhances SoC Slider related checks
When processor_thermal_soc_slider is loaded, its slider and offset modparams are visible. Check that the driver actually registered the profile named "SoC Slider" before reading or writing these modparams. n.b. This utility allows writing the Slider and Offset modparams even if the driver policy is not "balanced". Currently the processor_thermal_soc_slider consults those modparams only in "balanced" mode. Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Len Brown
|
b488997b9c |
tools/power turbostat: v2026.04.21
Since v2026.02.14 Display HT siblings in cpu# order. Add Module-ID column. Print Core-ID and APIC-ID in hex. Fix misc bugs. Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Len Brown
|
58839fdbd4 |
tools/power turbostat: Process HT siblings in CPU order
On large systems with HT sibling cpu#'s more than 32 apart, HT siblings were processed and displayed in reverse order. This was due to how set_thread_siblings() parsed the sibling-bit-mask. Update set_thread_siblings to instead parse the sibling-list, like other cpu lists, and to thus order HT siblings by ascending CPU number, no matter the size of the system. Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Len Brown
|
aea40f1e2d |
tools/power turbostat: Show module_id column
Get the "module_id" from the Linux topology "cluster_id". If the there is more than one id, show it by default. Module joins Die etc. in the "topology" group. Display in hex, as it is usually based mask of the APIC-id Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Len Brown
|
da828b6caf |
tools/power turbostat: Print core_id and apic_id in hex
The core_id is based on a mask of the apic_id. Print them both in hex, rather than decimal, to make this relationship visibly clear. Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Artem Bityutskiy
|
092b76a325 |
tools/power turbostat: Cleanup print helper functions
Make printer helper functions more readable by factoring out a local 'sep' variable. Remove the redundant parentheses around sprintf() calls. Remove an unnecessary cast to "unsigned int" by using the '%08llx' instead of '%08x'. No functional changes. [lenb: fix typos, simplify] Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Len Brown
|
08e11edd0e |
tools/power turbostat: Fix --cpu-set 1 regression on HT systems
When the "--cpu-set" option limits turbostat to run on
a higher numbered HT sibling, it exits upon dividing by zero.
This is because the HT support handles higher numbered siblings
at the same time as lower numbered siblings. But when that lower
number sibling is dis-allowed, the higher numbered sibling is
never processed. The result is a time delta of 0, which results
in a divide by 0 for any of the "per-second" metrics.
Enhance the HT enumeration code to record all siblings (up to SMT4).
Consult this complete HT sibling list to determine when
to process an HT sibling, and when to skip it.
Fixes:
|
||
|
Len Brown
|
2c52f942fc |
tools/power turbostat: Fix --cpu-set 0 regression on HT systems
"turbostat --cpu-set 0" appears to hang if cpu0 has an HT sibling.
This is because the initialization code recognizes that it does not
have to open perf files for the HT sibling, but the HT support
in the collection code sees the HT sibling and tries to read
from an uninitialized file descriptor, 0 (standard input).
Access HT siblings only when they are in the allowed set.
Fixes:
|
||
|
David Arcari
|
ce012c966b |
tools/power turbostat: Fix unrecognized option '-P'
The '-P' short option (shorthand for --no-perf) is not present in the
optstring of the second call to getopt_long_only(). This results in
the "unrecognized option" error when the tool reaches the main parsing
loop.
Add 'P' to the second getopt_long_only() call to ensure it is
consistently recognized.
Fixes:
|
||
|
Len Brown
|
3ae6bafa10 |
tools/power turbostat: Fix AMD RAPL regression on big systems
turbostat.c:8688: rapl_perf_init: Assertion `next_domain < num_domains' failed.
The initial fix for this regression was incomplete, as it did not
handle multi-package systems with sparse core ids.
Fixes:
|
||
|
Linus Torvalds
|
da6b5aae84 |
platform-drivers-x86 for v7.1-1
Highlights:
- asus-wmi:
- Retain battery charge threshold during boot which avoids unsolicited
change to 100%. Return -ENODATA when the limit is not yet known
- Improve screenpad power/brightness handling consistency
- Fix screenpad brightness range
- barco-p50-gpio: Normalize gpio_get return values
- bitland-mifs-wmi: Add driver for Bitland laptops (supports platform
profile,hwmon, kbd backlight, gpu mode, hotkeys, and
fan boost)
- dell_rbu: Fix using uninitialized value in sysfs write function
- dell-wmi-sysman: Respect destination length when constructing enum
strings
- hp-wmi:
- Propagate fan setting apply failures and log an error
- Fix sysfs write vs work handler cancel_delayed_work_sync() deadlock
- Correct keepalive schedule_delayed_work() to mod_delayed_work()
- Fix u8 underflows in GPU delta calculation
- Use mutex to protect fan pwm/mode
- Ignore kbd backlight and FnLock key events that are handled by FW
- Fix fan table parsing (use correct field)
- Add support for Omen 14-fb0xxx, 16-n0xxx, 16-wf1xxx, and Omen MAX
16-ak0xxxx
- input: trackpoint & thinkpad_acpi: Enable doubletap by default and
add sysfs enable/disable
- int3472: Add support for GPIO type 0x02 (IR flood LED)
- intel-speed-select: (updated to v1.26)
- Avoid using current base frequency as maximum
- Fix CPU extended family ID decoding
- Fix exit code
- Improve error reporting
- intel/vsec: Refactor to support ACPI-enumerated PMT endpoints.
- pcengines-apuv2: Attach software node to the gpiochip
- uniwill:
- Refactor hwmon to smaller parts to accomodate HW diversity
- Support USB-C power/performance priority switch through sysfs
- Add another XMG Fusion 15 (L19) DMI vendor
- Enable fine-grained features to device lineup mapping
- wmi: Perform output size check within WMI core to allow simpler WMI
drivers
- acpi_driver -> platform driver conversions (a large number of changes
from Rafael J. Wysocki)
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
acer-wireless:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
asus-laptop:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
asus-wireless:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
asus-wmi:
- adjust screenpad power/brightness handling
- do not enforce a battery charge threshold
- fix screenpad brightness range
barco-p50-gpio:
- convert to guard() notation
- normalize return value of gpio_get
bitland-mifs-wmi:
- Add new Bitland MIFS WMI driver
dell/dell-rbtn:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
dell_rbu:
- avoid uninit value usage in packet_size_write()
dell-wmi-sysman:
- bound enumeration string aggregation
- Clean up security buffer helpers
- Fix typo in function comment
- Use standard kobj_sysfs_ops
- Use sysfs_emit{_at} in show functions
Documentation: laptops:
- Update documentation for uniwill laptops
Documentation:
- thinkpad-acpi - Document doubletap_enable attribute
eeepc-laptop:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
fujitsu:
- Convert backlight driver to a platform one
- Convert laptop driver to a platform one
- Register ACPI notify handlers directly
- Reorder code to avoid forward declarations
fujitsu-tablet:
- Convert ACPI driver to a platform one
hp-wmi:
- add locking for concurrent hwmon access
- add Omen 14-fb0xxx (board 8C58) support
- Add support for Omen 16-n0xxx (8A44)
- Add support for Omen 16-wf1xxx (8C77)
- Add support for OMEN MAX 16-ak0xxx (8D87)
- avoid cancel_delayed_work_sync from work handler
- fix fan table parsing
- fix ignored return values in fan settings
- fix u8 underflow in gpu_delta calculation
- Ignore backlight and FnLock events
- use mod_delayed_work to reset keep-alive timer
input:
- trackpoint - Enable doubletap by default on capable devices
int3472:
- Add support for GPIO type 0x02 (IR flood LED)
- Parameterize LED con_id in registration
- Rename pled to led in LED registration code
- Use local variable for LED struct access
intel/rst:
- Convert ACPI driver to a platform one
intel/smartconnect:
- Convert ACPI driver to a platform one
intel/tpmi:
- Use 32 bit aligned address for debugfs mem write
intel/vsec:
- Decouple add/link helpers from PCI
- Make driver_data info const
- Plumb ACPI PMT discovery tables through vsec
- Refactor base_addr handling
- Return real error codes from registration path
- Switch exported helpers from pci_dev to device
lg-laptop:
- Convert ACPI driver to a platform one
- Drop debug-only ACPI notify handler
nvsw-sn2201:
- Drop unused include
panasonic-laptop:
- Convert ACPI driver to a platform one
- Fix OPTD notifier registration and cleanup
- Make pcc_register_optd_notifier() void
- Register ACPI notify handler directly
- Remove redundant checks from 3 functions
pcengines-apuv2:
- attach software node to the gpiochip
sony-laptop:
- Convert NC driver to a platform one
- Convert PIC driver to a platform one
- Register ACPI notify handler directly
surface: hotplug:
- Correct inclusion for GPIO APIs
surface: surfacepro3_button:
- Convert to a platform driver
- Drop wakeup source on remove
- Register ACPI notify handler
system76:
- Convert ACPI driver to a platform one
- Drop redundant devm_led_classdev_unregister()
- Register ACPI notify handler directly
thinkpad_acpi:
- Add sysfs control for TrackPoint double-tap
- Drop ACPI driver registration
- remove obsolete TODO comment
- use seq_puts() instead of seq_printf()
tools/power/x86/intel-speed-select:
- Avoid current base freq as maximum
- Fix cpu extended family ID decoding
- Fix output when running on unsupported CLX platforms
- Fix some program return value
- Print Version info when Incompatible API version is detected
- v1.26 release
topstar-laptop:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
toshiba_acpi:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
- Reorder code to avoid forward declaration
toshiba_bluetooth:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
toshiba_haps:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
uniwill-laptop:
- Apply features across all TUXEDO devices
- Fix signedness bug
- Fix XMG Fusion 15 (L19) entries
- Implement USB-C power priority setting
- Rework hwmon feature defines
wireless-hotkey:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
wmi:
- Add wmidev_invoke_procedure()
- Convert drivers to use wmidev_invoke_procedure()
- Extend wmidev_invoke_method() to reject undersized data
- Extend wmidev_query_block() to reject undersized data
- Prepare to reject undersized unmarshalling results
- Replace .no_notify_data with .min_event_size
x86:
- remove unnecessary module_init/exit() functions
Merges:
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into review-ilpo-next
- Merge tag 'fixes' into 'for-next'
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaeYxSwAKCRBZrE9hU+XO
MRzTAQCPUKVOpSY/cjtPXVBn0uJbAo1MSvytv00Kv7dcatvrrwEA9lqmwOfl0kzr
CowEVVCD3om++W9vOsL65hachbAl1QA=
=1qkw
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"asus-wmi:
- Retain battery charge threshold during boot which avoids
unsolicited change to 100%. Return -ENODATA when the limit
is not yet known
- Improve screenpad power/brightness handling consistency
- Fix screenpad brightness range
barco-p50-gpio:
- Normalize gpio_get return values
bitland-mifs-wmi:
- Add driver for Bitland laptops (supports platform profile,
hwmon, kbd backlight, gpu mode, hotkeys, and fan boost)
dell_rbu:
- Fix using uninitialized value in sysfs write function
dell-wmi-sysman:
- Respect destination length when constructing enum strings
hp-wmi:
- Propagate fan setting apply failures and log an error
- Fix sysfs write vs work handler cancel_delayed_work_sync() deadlock
- Correct keepalive schedule_delayed_work() to mod_delayed_work()
- Fix u8 underflows in GPU delta calculation
- Use mutex to protect fan pwm/mode
- Ignore kbd backlight and FnLock key events that are handled by FW
- Fix fan table parsing (use correct field)
- Add support for Omen 14-fb0xxx, 16-n0xxx, 16-wf1xxx, and
Omen MAX 16-ak0xxxx
input: trackpoint & thinkpad_acpi:
- Enable doubletap by default and add sysfs enable/disable
int3472:
- Add support for GPIO type 0x02 (IR flood LED)
intel-speed-select: (updated to v1.26)
- Avoid using current base frequency as maximum
- Fix CPU extended family ID decoding
- Fix exit code
- Improve error reporting
intel/vsec:
- Refactor to support ACPI-enumerated PMT endpoints.
pcengines-apuv2:
- Attach software node to the gpiochip
uniwill:
- Refactor hwmon to smaller parts to accomodate HW diversity
- Support USB-C power/performance priority switch through sysfs
- Add another XMG Fusion 15 (L19) DMI vendor
- Enable fine-grained features to device lineup mapping
wmi:
- Perform output size check within WMI core to allow simpler WMI
drivers
misc:
- acpi_driver -> platform driver conversions (a large number of
changes from Rafael J. Wysocki)
- cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (106 commits)
platform/x86: hp-wmi: Add support for Omen 16-wf1xxx (8C77)
platform/x86: hp-wmi: Add support for Omen 16-n0xxx (8A44)
platform/x86: hp-wmi: Add support for OMEN MAX 16-ak0xxx (8D87)
platform/x86: hp-wmi: fix fan table parsing
platform/x86: hp-wmi: add Omen 14-fb0xxx (board 8C58) support
platform/wmi: Replace .no_notify_data with .min_event_size
platform/wmi: Extend wmidev_query_block() to reject undersized data
platform/wmi: Extend wmidev_invoke_method() to reject undersized data
platform/wmi: Prepare to reject undersized unmarshalling results
platform/wmi: Convert drivers to use wmidev_invoke_procedure()
platform/wmi: Add wmidev_invoke_procedure()
platform/x86: int3472: Add support for GPIO type 0x02 (IR flood LED)
platform/x86: int3472: Parameterize LED con_id in registration
platform/x86: int3472: Rename pled to led in LED registration code
platform/x86: int3472: Use local variable for LED struct access
platform/x86: thinkpad_acpi: remove obsolete TODO comment
platform/x86: dell-wmi-sysman: bound enumeration string aggregation
platform/x86: hp-wmi: Ignore backlight and FnLock events
platform/x86: uniwill-laptop: Fix signedness bug
platform/x86: dell_rbu: avoid uninit value usage in packet_size_write()
...
|
||
|
Kaushlendra Kumar
|
feffac1874 |
tools/power/x86: Add SOC slider and platform profile support
Add support for reading and writing SOC slider parameters and platform profile via sysfs in x86_energy_perf_policy. New command-line options: --soc-slider-balance <value> --soc-slider-offset <value> --platform-profile <name> These options allow control of the processor thermal SOC slider balance and offset through the processor_thermal_soc_slider module, as well as the platform profile class interface. When no update flags are set, the tool now also prints the current SOC slider and platform profile values alongside existing MSR output. Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Linus Torvalds
|
d7c8087a9c |
Power management updates for 7.1-rc1
- Update qcom-hw DT bindings to include Eliza hardware (Abel Vesa)
- Update cpufreq-dt-platdev blocklist (Faruque Ansari)
- Minor updates to driver and dt-bindings for Tegra (Thierry Reding,
Rosen Penev)
- Add MAINTAINERS entry for CPPC driver (Viresh Kumar)
- Add support for new features: CPPC performance priority, Dynamic EPP,
Raw EPP, and new unit tests for them to amd-pstate (Gautham Shenoy,
Mario Limonciello)
- Fix sysfs files being present when HW missing and broken/outdated
documentation in the amd-pstate driver (Ninad Naik, Gautham Shenoy)
- Pass the policy to cpufreq_driver->adjust_perf() to avoid using
cpufreq_cpu_get() in the .adjust_perf() callback in amd-pstate which
leads to a scheduling-while-atomic bug (K Prateek Nayak)
- Clean up dead code in Kconfig for cpufreq (Julian Braha)
- Remove max_freq_req update for pre-existing cpufreq policy and add a
boost_freq_req QoS request to save the boost constraint instead of
overwriting the last scaling_max_freq constraint (Pierre Gondois)
- Embed cpufreq QoS freq_req objects in cpufreq policy so they all
are allocated in one go along with the policy to simplify lifetime
rules and avoid error handling issues (Viresh Kumar)
- Use DMI max speed when CPPC is unavailable in the acpi-cpufreq
scaling driver (Henry Tseng)
- Switch policy_is_shared() in cpufreq to using cpumask_nth() instead
of cpumask_weight() because the former is more efficient (Yury Norov)
- Use sysfs_emit() in sysfs show functions for cpufreq governor
attributes (Thorsten Blum)
- Update intel_pstate to stop returning an error when "off" is written
to its status sysfs attribute while the driver is already off (Fabio
De Francesco)
- Include current frequency in the debug message printed by
__cpufreq_driver_target() (Pengjie Zhang)
- Refine stopped tick handling in the menu cpuidle governor and
rearrange stopped tick handling in the teo cpuidle governor (Rafael
Wysocki)
- Add Panther Lake C-states table to the intel_idle driver (Artem
Bityutskiy)
- Clean up dead dependencies on CPU_IDLE in Kconfig (Julian Braha)
- Simplify cpuidle_register_device() with guard() (Huisong Li)
- Use performance level if available to distinguish between rates in
OPP debugfs (Manivannan Sadhasivam)
- Fix scoped_guard in dev_pm_opp_xlate_required_opp() (Viresh Kumar)
- Return -ENODATA if the snapshot image is not loaded (Alberto Garcia)
- Remove inclusion of crypto/hash.h from hibernate_64.c on x86 (Eric
Biggers)
- Clean up and rearrange the intel_rapl power capping driver to make
the respective interface drivers (TPMI, MSR, and MMOI) hold their
own settings and primitives and consolidate PL4 and PMU support
flags into rapl_defaults (Kuppuswamy Sathyanarayanan)
- Correct kernel-doc function parameter names in the power capping core
code (Randy Dunlap)
- Remove unneeded casting for HZ_PER_KHZ in devfreq (Andy Shevchenko)
- Use _visible attribute to replace create/remove_sysfs_files() in
devfreq (Pengjie Zhang)
- Add Tegra114 support to activity monitor device in tegra30-devfreq as
a preparation to upcoming EMC controller support (Svyatoslav Ryhel)
- Fix mistakes in cpupower man pages, add the boost and epp options to
the cpupower-frequency-info man page, and add the perf-bias option to
the cpupower-info man page (Roberto Ricci)
- Remove unnecessary extern declarations from getopt.h in arguments
parsing functions in cpufreq-set, cpuidle-info, cpuidle-set,
cpupower-info, and cpupower-set utilities (Kaushlendra Kumar)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmnY9TISHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1G9gH/j5mEqfPpiwX6fQ/ZwOGdNOOPVA5w9j4
KPHSMwMD5lZkoaZfasp2vt27KY5SOoVVvRZ2DKkFJ3Jai4I3cUPZYypga2nre1ag
tgzX4vOjcw2r40Eda6ezWl1h4mca/xJJBX7xH2+hn1JY+Y1in37g50CqMIjKh96z
Uugkk6UZytL1XcF55PMhIUgDf6pDtRT5UOW9xOKOkUt8FVWTJ7ei3HaWyV5kDmVq
b5eQ42+OH7y6sWNnoKczFd8fStvh6J/avoJurBEvcOQhMcjaIaB48G19+KjDg73E
NjrVcgG20P2rltBvV2d0J1TKskZHkaP7XjIeWfkwjGZhee3FL7ssS/g=
=fRCO
-----END PGP SIGNATURE-----
Merge tag 'pm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"Once again, cpufreq is the most active development area, mostly
because of the new feature additions and documentation updates in the
amd-pstate driver, but there are also changes in the cpufreq core
related to boost support and other assorted updates elsewhere.
Next up are power capping changes due to the major cleanup of the
Intel RAPL driver.
On the cpuidle front, a new C-states table for Intel Panther Lake is
added to the intel_idle driver, the stopped tick handling in the menu
and teo governors is updated, and there are a couple of cleanups.
Apart from the above, support for Tegra114 is added to devfreq and
there are assorted cleanups of that code, there are also two updates
of the operating performance points (OPP) library, two minor updates
related to hibernation, and cpupower utility man pages updates and
cleanups.
Specifics:
- Update qcom-hw DT bindings to include Eliza hardware (Abel Vesa)
- Update cpufreq-dt-platdev blocklist (Faruque Ansari)
- Minor updates to driver and dt-bindings for Tegra (Thierry Reding,
Rosen Penev)
- Add MAINTAINERS entry for CPPC driver (Viresh Kumar)
- Add support for new features: CPPC performance priority, Dynamic
EPP, Raw EPP, and new unit tests for them to amd-pstate (Gautham
Shenoy, Mario Limonciello)
- Fix sysfs files being present when HW missing and broken/outdated
documentation in the amd-pstate driver (Ninad Naik, Gautham Shenoy)
- Pass the policy to cpufreq_driver->adjust_perf() to avoid using
cpufreq_cpu_get() in the .adjust_perf() callback in amd-pstate
which leads to a scheduling-while-atomic bug (K Prateek Nayak)
- Clean up dead code in Kconfig for cpufreq (Julian Braha)
- Remove max_freq_req update for pre-existing cpufreq policy and add
a boost_freq_req QoS request to save the boost constraint instead
of overwriting the last scaling_max_freq constraint (Pierre
Gondois)
- Embed cpufreq QoS freq_req objects in cpufreq policy so they all
are allocated in one go along with the policy to simplify lifetime
rules and avoid error handling issues (Viresh Kumar)
- Use DMI max speed when CPPC is unavailable in the acpi-cpufreq
scaling driver (Henry Tseng)
- Switch policy_is_shared() in cpufreq to using cpumask_nth() instead
of cpumask_weight() because the former is more efficient (Yury
Norov)
- Use sysfs_emit() in sysfs show functions for cpufreq governor
attributes (Thorsten Blum)
- Update intel_pstate to stop returning an error when "off" is
written to its status sysfs attribute while the driver is already
off (Fabio De Francesco)
- Include current frequency in the debug message printed by
__cpufreq_driver_target() (Pengjie Zhang)
- Refine stopped tick handling in the menu cpuidle governor and
rearrange stopped tick handling in the teo cpuidle governor (Rafael
Wysocki)
- Add Panther Lake C-states table to the intel_idle driver (Artem
Bityutskiy)
- Clean up dead dependencies on CPU_IDLE in Kconfig (Julian Braha)
- Simplify cpuidle_register_device() with guard() (Huisong Li)
- Use performance level if available to distinguish between rates in
OPP debugfs (Manivannan Sadhasivam)
- Fix scoped_guard in dev_pm_opp_xlate_required_opp() (Viresh Kumar)
- Return -ENODATA if the snapshot image is not loaded (Alberto
Garcia)
- Remove inclusion of crypto/hash.h from hibernate_64.c on x86 (Eric
Biggers)
- Clean up and rearrange the intel_rapl power capping driver to make
the respective interface drivers (TPMI, MSR, and MMOI) hold their
own settings and primitives and consolidate PL4 and PMU support
flags into rapl_defaults (Kuppuswamy Sathyanarayanan)
- Correct kernel-doc function parameter names in the power capping
core code (Randy Dunlap)
- Remove unneeded casting for HZ_PER_KHZ in devfreq (Andy Shevchenko)
- Use _visible attribute to replace create/remove_sysfs_files() in
devfreq (Pengjie Zhang)
- Add Tegra114 support to activity monitor device in tegra30-devfreq
as a preparation to upcoming EMC controller support (Svyatoslav
Ryhel)
- Fix mistakes in cpupower man pages, add the boost and epp options
to the cpupower-frequency-info man page, and add the perf-bias
option to the cpupower-info man page (Roberto Ricci)
- Remove unnecessary extern declarations from getopt.h in arguments
parsing functions in cpufreq-set, cpuidle-info, cpuidle-set,
cpupower-info, and cpupower-set utilities (Kaushlendra Kumar)"
* tag 'pm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
cpufreq/amd-pstate: Add POWER_SUPPLY select for dynamic EPP
cpupower: remove extern declarations in cmd functions
cpuidle: Simplify cpuidle_register_device() with guard()
PM / devfreq: tegra30-devfreq: add support for Tegra114
PM / devfreq: use _visible attribute to replace create/remove_sysfs_files()
PM / devfreq: Remove unneeded casting for HZ_PER_KHZ
MAINTAINERS: amd-pstate: Step down as maintainer, add Prateek as reviewer
cpufreq: Pass the policy to cpufreq_driver->adjust_perf()
cpufreq/amd-pstate: Pass the policy to amd_pstate_update()
cpufreq/amd-pstate-ut: Add a unit test for raw EPP
cpufreq/amd-pstate: Add support for raw EPP writes
cpufreq/amd-pstate: Add support for platform profile class
cpufreq/amd-pstate: add kernel command line to override dynamic epp
cpufreq/amd-pstate: Add dynamic energy performance preference
Documentation: amd-pstate: fix dead links in the reference section
cpufreq/amd-pstate: Cache the max frequency in cpudata
Documentation/amd-pstate: Add documentation for amd_pstate_floor_{freq,count}
Documentation/amd-pstate: List amd_pstate_prefcore_ranking sysfs file
Documentation/amd-pstate: List amd_pstate_hw_prefcore sysfs file
amd-pstate-ut: Add a testcase to validate the visibility of driver attributes
...
|
||
|
Linus Torvalds
|
96463e4e02 |
Turbostat Fixes
Fix a memory allocation issue that could corrupt output values or SEGV Fix a perf initilization issue that could exit on some HW + kernels. Minor fixes. -----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEE67dNfPFP+XUaA73mB9BFOha3NhcFAmnY/PkUHGxlbi5icm93 bkBpbnRlbC5jb20ACgkQB9BFOha3NhcTIA//QsbmJV7qddOe/kOhS7izRyVjuaLQ QIyIrSLSa5+49oT4uRhZxuzDm6N6zVykFf+yxK5E2TSf+JfvzfwjZJQEgUPqHtkt vietoJheI4voMgmDQk39oxQmYyxmXuD3TRgvY+EN+QEIuWFA3/J9YaOulQMICrRy TX3juoZ3mxUpO8LC6+t3Yd8Kl1JEl3cKj3LdX7cMIchLM2cSTlbVFGSP0y5f0mu/ m54+JLSeSCFyqfin8rkgLYar8+AIIrHVak57rQ3qKBUOfoJlMaJEgXC4/sKdEzAW zKld2cFfzzXd2LnShN9Su7L9VCF09POKpD7P9bk9rDcp/MfsOmlKRctRvnY4T7Bq si+AflAYzYtHlq0LQbw2tHsKLFnqIJziDzz+YHl9UxcK0X17Gkp32NSQOX7Djvdu g/HDMHudnyoq0dAObieQgevYAWYmfKTNeQpJk+d+27X9HTzNXCDe70D774+DhM73 ViDU5zPrFBc1Z9ScQmgbe4z2N3MvzWGkodJRseb1v44ClH+Z6sCG4RYxYpxj0Zyu 0rR5GBb6ymuDUAQYEVuk2/F05bgmp3oXhoaddC+bO115XGEfe9sR7PBk3p9LYSM5 KirznZsjE8qI8GUXdL4EztTtIUJ5sx9CWb5FqP6k7XovrPCoMhSsbbo0vUbLCK4C eh0+iPh3sAf0NZs= =xJLy -----END PGP SIGNATURE----- Merge tag 'turbostat-fixes-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat fixes from Len Brown: - Fix a memory allocation issue that could corrupt output values or SEGV - Fix a perf initilization issue that could exit on some HW + kernels - Minor fixes * tag 'turbostat-fixes-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: Allow execution to continue after perf_l2_init() failure tools/power turbostat: Fix delimiter bug in print functions tools/power turbostat: Fix --show/--hide for individual cpuidle counters tools/power turbostat: Fix incorrect format variable tools/power turbostat: Consistently use print_float_value() tools/power/turbostat: Fix microcode patch level output for AMD/Hygon tools/power turbostat: Eliminate unnecessary data structure allocation tools/power turbostat: Fix swidle header vs data display tools/power turbostat: Fix illegal memory access when SMT is present and disabled |
||
|
David Arcari
|
ba893caead |
tools/power turbostat: Allow execution to continue after perf_l2_init() failure
Currently, if perf_l2_init() fails turbostat exits after issuing the following error (which was encountered on AlderLake): turbostat: perf_l2_init(cpu0, 0x0, 0xff24) REFS: Invalid argument This occurs because perf_l2_init() calls err(). However, the code has been written in such a manner that it is able to perform cleanup and continue. Therefore, this issue can be addressed by changing the appropriate calls to err() to warnx(). Additionally, correct the PMU type arguments passed to the warning strings in the ecore and lcore blocks so the logs accurately reflect the failing counter type. Signed-off-by: David Arcari <darcari@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Kaushlendra Kumar
|
2fd3b83cac |
cpupower: remove extern declarations in cmd functions
extern char *optarg and extern int optind, opterr, optopt are already declared by <getopt.h>, which is included at the top of the file. Repeating extern declarations inside a function body is misleading and unnecessary. Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Srinivas Pandruvada
|
ee69d9e32b |
tools/power/x86/intel-speed-select: v1.26 release
This version includes the following changes: - Setting current base frequency as maximum for SST-BF with kernel QOS changes - Harmonize extended family decoded with the rest of the kernel - Minor changes for error codes and messages Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> |
||
|
Zhang Rui
|
1b25f03f3d |
tools/power/x86/intel-speed-select: Fix output when running on unsupported CLX platforms
When running intel-speed-select on unsupported CLX platforms, it prints intel-speed-select: Invalid CPU model (85) : Success Because this is not a system error and errno is not set. Replace err() with exit(). Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> |
||
|
Zhang Rui
|
93f5b44b41 |
tools/power/x86/intel-speed-select: Print Version info when Incompatible API version is detected
When running an old version intel-speed-select tool on newer platforms, even with "intel-speed-select -v", the tool only complains about "Incompatible API version", without giving the current version info. Print Version info whenever Incompatible API version is detected. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> |
||
|
Zhang Rui
|
3e244dd513 |
tools/power/x86/intel-speed-select: Fix some program return value
When running the "intel-speed-select -h" command, it returns 1. 0 when using a version that is API incompatible. 2. 1 when using a version that is API compatible. And this is confusing. Fix the program to return 0 for "-h" parameter, and return 1 whenever "Incompatible API versions" is detected. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> |
||
|
Zhang Rui
|
df4a835431 |
tools/power/x86/intel-speed-select: Fix cpu extended family ID decoding
When decode and use CPU extended family ID in intel-speed-select, there are several potential issues, 1. Mask with 0x0f to get CPU extended family ID is bogus because CPU extended family ID takes 8 bits (bit 27:20). 2. Use CPU extended family ID fields without checking CPU family ID is risky. Because Intel SDM says, "The Extended Family ID needs to be examined only when the Family ID is 0FH." 3. Saving cpu family ID and cpu extended family ID separately doesn't align with Linux kernel. And it may bring extra complexity when making family specific changes in the future. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> |
||
|
Srinivas Pandruvada
|
ae67f58239 |
tools/power/x86/intel-speed-select: Avoid current base freq as maximum
SST-PP level change results in online/offline of CPUs with -o option. The Linux intel-pstate driver internally stores the current HWP_REQ MSR value during offline and restores them during online. It is possible that during SST-PP level change, the new HWP_CAP limits can be updated. So, when a CPU is online, the HWP_REQ MSR should be updated to new values based on HWP_CAP values. This is particularly problematic when either turbo is disabled or the current HWP_REQ value (stored before online) is less than the base frequency from the updated HWP_CAP MSR guaranteed value. If the HWP_REQ MSR is not updated, then the performance will be limited to the value before perf level change. Hence the tool updates cpufreq scaling_max_freq to the newer base_frequency value in this case. This step is not required when HWP interrupts are enabled, as the perf level change should result in a new interrupt with HWP_GUARANTEED_PERF_CHANGE_STATUS and the intel_pstate driver will update to new limits. But the tool needs to handle the case when HWP interrupts are not enabled but there is no way for the tool to know that HWP interrupts are enabled or not. So, it has to still update the scaling_max_freq. With the QOS changes in the kernel, user space writes to scaling_max_freq are treated as hard limits. So, when base frequency is increased with SST-BF enabled, the cpufreq subsystem will still not allow setting to the SST-BF high priority core frequency. So, the HWP_REQ MSR will still be capped to the user-set scaling_max_freq after SST-PP level change. To address this, instead of setting scaling_max_freq to the current HWP_CAP highest frequency, set it to the maximum integer value to set the QOS limit as unconstrained. In this case, the actual HWP_REQ maximum frequency will still be capped to HWP_CAP highest performance by the intel-pstate driver. So, it will not result in invalid HWP_REQ values. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> |
||
|
Roberto Ricci
|
8bbd81ddbe |
cpupower-info.1: describe the --perf-bias option
The cpupower-info(1) man page only mentions the short form of the
'--perf-bias' option in the synopsys, but the long form is not documented
and its effect is not explained.
cpupower-info.c:
{"perf-bias", optional_argument, NULL, 'b'},
Signed-off-by: Roberto Ricci <io@r-ricci.it>
Link: https://lore.kernel.org/r/20260324223921.14317-5-io@r-ricci.it
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
||
|
Roberto Ricci
|
ed2946802b |
cpupower-frequency-info.1: document --boost and --epp options
`cpupower frequency-info` supports the '--boost' option since the program was first added with commit |
||
|
Roberto Ricci
|
10a54e7159 |
cpupower-frequency-info.1: use the proper name of the --perf option
The cpupower-frequency-info(1) man page describes a '--perf' option.
Even though this form is accepted by the program, its proper name is
'--performance'.
cpufreq-info.c:
{"performance", no_argument, NULL, 'c'},
Signed-off-by: Roberto Ricci <io@r-ricci.it>
Link: https://lore.kernel.org/r/20260324223921.14317-3-io@r-ricci.it
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
||
|
Roberto Ricci
|
193f41dad3 |
cpupower-idle-info.1: fix short option names
The cpupower-idle-info(1) man page describes '-f' as the short form of the
'--silent' option and '-e' as the short form of the '--proc' option.
But they are not correct:
$ cpupower idle-info -f
idle-info: invalid option -- 'f'
invalid or unknown argument
$ cpupower idle-info -e
idle-info: invalid option -- 'e'
invalid or unknown argument
The short form of '--silent' is actually '-s' and the short form of
'--proc' is actually '-o':
cpuidle-info.c:
{"silent", no_argument, NULL, 's'},
{"proc", no_argument, NULL, 'o'},
Signed-off-by: Roberto Ricci <io@r-ricci.it>
Link: https://lore.kernel.org/r/20260324223921.14317-2-io@r-ricci.it
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
||
|
Artem Bityutskiy
|
cdbefe9d40 |
tools/power turbostat: Fix delimiter bug in print functions
Commands that add counters, such as 'turbostat --show C1,C1+'
display merged columns without a delimiter.
This is caused by the bad syntax: '(*printed++ ? delim : "")', shared by
print_name()/print_hex_value()/print_decimal_value()/print_float_value()
Use '((*printed)++ ? delim : "")' to correctly increment the value at *printed.
[lenb: fix code and commit message typo, re-word]
Fixes:
|
||
|
Artem Bityutskiy
|
b6398bc2ef |
tools/power turbostat: Fix --show/--hide for individual cpuidle counters
Problem: individual swidle counter names (C1, C1+, C1-, etc.) cannot be
selected via --show/--hide due to two bugs in probe_cpuidle_counts():
1. The function returns immediately when BIC_cpuidle is not enabled,
without checking deferred_add_index.
2. The deferred name check runs against name_buf before the trailing
newline is stripped, so is_deferred_add("C1\n") never matches "C1".
Fix:
1. Relax the early return to pass through when deferred names are
queued.
2. Strip the trailing newline from name_buf before performing deferred
name checks.
3. Check each suffixed variant (C1+, C1, C1-) individually so that
e.g. "--show C1+" enables only the requested metric.
In addition, introduce a helper function to avoid repeating the
condition (readability cleanup).
Fixes:
|
||
|
Artem Bityutskiy
|
23cb4f5c81 |
tools/power turbostat: Fix incorrect format variable
In the perf thread, core, and package counter loops, an incorrect
'mp->format' variable is used instead of 'pp->format'.
[lenb: edit commit message]
Fixes:
|
||
|
Artem Bityutskiy
|
ed532d738a |
tools/power turbostat: Consistently use print_float_value()
Fix the PMT thread code to use print_float_value(), to be consistent with the PMT core and package code. [lenb: commit message] Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Serhii Pievniev
|
a444083286 |
tools/power/turbostat: Fix microcode patch level output for AMD/Hygon
turbostat always used the same logic to read the microcode patch level,
which is correct for Intel but not for AMD/Hygon.
While Intel stores the patch level in the upper 32 bits of MSR, AMD
stores it in the lower 32 bits, which causes turbostat to report the
microcode version as 0x0 on AMD/Hygon.
Fix by shifting right by 32 for non-AMD/Hygon, preserving the existing
behavior for Intel and unknown vendors.
Fixes:
|
||
|
Zhang Rui
|
99b38fa343 |
tools/power turbostat: Eliminate unnecessary data structure allocation
Linux core_id's are a per-package namespace, not a per-node namespace. Rename topo.cores_per_node to topo.cores_per_pkg to reflect this. Eliminate topo.nodes_per_pkg from the sizing for core data structures, since it has no role except to unnecessarily bloat the allocation. Validated on multiple Intel platforms (ICX/SPR/SRF/EMR/GNR/CWF) with various CPU online/offline configurations and SMT enabled/disabled scenarios. No functional changes. [lenb: commit message] Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> |
||
|
Len Brown
|
b8ead30e2b |
tools/power turbostat: Fix swidle header vs data display
I changed my mind about displaying swidle statistics,
which are "added counters". Recently I reverted the
column headers to 8-columns, but kept print_decimal_value()
padding out to 16-columns for all 64-bit counters.
Simplify by keeping print_decimial_value() at %lld -- which
will often fit into 8-columns, and live with the fact
that it can overflow and shift the other columns,
which continue to tab-delimited.
This is a better compromise than inserting a bunch
of space characters that most users don't like.
Fixes:
|
||
|
Zhang Rui
|
57d2371d52 |
tools/power turbostat: Fix illegal memory access when SMT is present and disabled
When SMT is present and disabled, turbostat may under-size
the thread_data array. This can corrupt results or
cause turbostat to exit with a segmentation fault.
[lenb: commit message]
Fixes:
|
||
|
Zhang Rui
|
3817b1d344 |
cpupower: Add intel_pstate turbo boost support for Intel platforms
On modern Intel platforms, the intel_pstate driver is commonly used and
it provides turbo boost control via
/sys/devices/system/cpu/intel_pstate/no_turbo.
However, cpupower doesn't handle this. it
1. shows turbo boost as "active" blindly for Intel platforms
2. controls turbo boost functionality via the generic
/sys/devices/system/cpu/cpufreq/boost sysfs interface only.
Enhance the cpupower tool to ensure the "--boost" command works
seamlessly on Intel platforms with intel_pstate driver running.
Without this patch,
$ echo 1 | sudo tee /sys/devices/system/cpu/intel_pstate/no_turbo
1
$ sudo cpupower frequency-info --boost
analyzing CPU 21:
boost state support:
Supported: yes
Active: yes
$ sudo cpupower set --boost 0
Error setting turbo-boost
$ sudo cpupower set --boost 1
Error setting turbo-boost
With this patch,
$ cat /sys/devices/system/cpu/intel_pstate/no_turbo
0
$ sudo cpupower set --boost 0
$ sudo cpupower frequency-info --boost
analyzing CPU 21:
boost state support:
Supported: yes
Active: no
$ cat /sys/devices/system/cpu/intel_pstate/no_turbo
1
$ sudo cpupower set --boost 1
$ sudo cpupower frequency-info --boost
analyzing CPU 28:
boost state support:
Supported: yes
Active: yes
$ cat /sys/devices/system/cpu/intel_pstate/no_turbo
0
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
||
|
Jan Kiszka
|
50ad1a31be |
cpupower: Add support for setting EPP via systemd service
Extend the systemd service so that it can be used for tuning the Energy Performance Preference (EPP) as well. Available options can be read from /sys/devices/system/cpu/cpufreq/policy0/energy_performance_available_preferences. The desired one can then be set in cpupower-service.conf. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Kaushlendra Kumar
|
dff8e3c025 |
cpupower: fix swapped power/energy unit labels
Fix error where microWatts and microJoules units were interchanged. Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Linus Torvalds
|
7ad54bbbc9 |
turbostat-2026.02.14-AMD-RAPL-fix
Fix a recent AMD regression due to errant code cleanup. -----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEE67dNfPFP+XUaA73mB9BFOha3NhcFAmmVTxQUHGxlbi5icm93 bkBpbnRlbC5jb20ACgkQB9BFOha3Nhd7fxAAtzAu/NDP1pRaJkHQtMBVf9E1RUKZ 4HLoOxwdOqId3spfYRXIcQ0M9o31MBdNNjnSeJgwVIdPu1ie91SPjMcRZv+xqA4z Z6mowdhDYvmrtQbi9KcPKtYqmujA+NimobYVlY9ze7q2kI8GC3ogyb1m1BkN/wYA GYFez5d2PyS3A/X3sC9eMLwJv9w/8E3n52X8gDvxzGazP51jkgDo5reoW+tm3y/d Tr0YUzZOVYVhnorJm90lY5VTQZZ7/RFgPClvb7Izk3nueXHbM/5p26avDOmBEyPQ 1s5CU/1niMOy3dTUDUY5h6hEoOig1+qcg0GIgmrrbvhBmhlvVEB5Me999u2/5nUN ZCCRPrpXRCTysg/3wGx+0O0L32cTf59mHiGyToFB46LTTA0JOj1j45h7mNwI2yfa wZwhwbcOwXzMAO9TIbXIvN0xd++9QhTz5XDivZcQSHRYLVzP6nRizO40+1F2PMyG iBah5zFtIzfqWEUSOkj/Nce7u+I/Dp75lI6yiHp2RYJ3GkTjr9/09SaHjmSXlJ56 9QV16lmWB0i59cMVH2n+b9DADP3piVU8FLXFjr0B3SHT2Ayg6sXWNHrk8Loa5qZM 8kd8HtBEZTVwfREWW3772ZjkEfT1WprEsF7pbHHUoqtPqa3X2G47xOC4ZZY81UqH gml3aw66jhIHlps= =THke -----END PGP SIGNATURE----- Merge tag 'turbostat-2026.02.14-AMD-RAPL-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat fix from Len Brown: "Fix a recent AMD regression due to errant code cleanup" * tag 'turbostat-2026.02.14-AMD-RAPL-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: Fix AMD RAPL regression |
||
|
Len Brown
|
ef0e60083f |
tools/power turbostat: Fix AMD RAPL regression
turbostat.c:8688: rapl_perf_init: Assertion `next_domain < num_domains' failed. Two recent cleanup patches that were not supposed to change anything broke the core_id code needed for AMD RAPL initialization: commit |
||
|
Linus Torvalds
|
2961f841b0 |
turbostat-2026.02.14
Since release 2025.12.02: Add L2 statistics columns for recent Intel processors: L2MRPS = L2 Cache M-References Per Second L2%hit = L2 Cache Hit % Sort work and output by cpu# rather than core# Minor features and fixes. -----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEE67dNfPFP+XUaA73mB9BFOha3NhcFAmmPhVYUHGxlbi5icm93 bkBpbnRlbC5jb20ACgkQB9BFOha3NhfpyxAAuAjLE5AD+pHSSMW/wOXU5YxU5L5g xIo5rWrgMIwx3IGDZE3EO45N0GpMDrL1hwmjPT/NtF+RESlzxo7NrsdrAM9+u8Eu qMu+Krd45cGwi/q37QD337pIMLvG1nT46BLt4eQk2TpUJSJynNF4WiwJ32enHoSh lwG76mChITxOdGDYfAvLZknsJqJgpv9sBbJzm3M7HxIKEnobKfE4A3Urooq+sz5X zWcNSPBWNnVLSIs79INbgSaFBY51P3HtIaXvmivfAKS5BWcUZ6/5BAiCG+QjSqIe l6bW4HU0UdVwzX76g2mApeeU40mz53xO5uDN9oriXOAEFh3unf4ui0I62TBgjDCB Y86XfFAXzjYMfml9rM8pA7U6Rj+3XrMFjRdrO+7itKHotaWrXylr6qO3bNO6DxN1 OTcveL8hdnTunGOsiOuG2CFfwLxMhpyyb9+MBA5JNofltCmzgrhW7TjzLKPXM4fE xCIe16RR/1DEw1PnPzYABU8gNmhTjm0zbUC8tlQhe8G9tSAXtBoz9Zv5bnqHr++6 ETlipyt9u7awj9APX/Oye/0eskcYVgST3XimXxD5rQrtveRyg/4B8PTej9eXNIp3 8eJjFkv+I+/740KetJFD/6gP8SBbO0bRV5yjDDXJ8ihbqm8854tFaOSef3W8zXNc 8iuNqxby3SVZc7Q= =UG/p -----END PGP SIGNATURE----- Merge tag 'turbostat-2026.02.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown: - Add L2 statistics columns for recent Intel processors: L2MRPS = L2 Cache M-References Per Second L2%hit = L2 Cache Hit % - Sort work and output by cpu# rather than core# - Minor features and fixes * tag 'turbostat-2026.02.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (23 commits) tools/power turbostat: version 2026.02.14 tools/power turbostat: Fix and document --header_iterations tools/power turbostat: Use strtoul() for iteration parsing tools/power turbostat: Favor cpu# over core# tools/power turbostat: Expunge logical_cpu_id tools/power turbostat: Enhance HT enumeration tools/power turbostat: Simplify global core_id calculation tools/power turbostat: Unify even/odd/average counter referencing tools/power turbostat: Allocate average counters dynamically tools/power turbostat: Delete core_data.core_id tools/power turbostat: Rename physical_core_id to core_id tools/power turbostat: Cleanup package_id tools/power turbostat: Cleanup internal use of "base_cpu" tools/power turbostat: Add L2 cache statistics tools/power turbostat: Remove redundant newlines from err(3) strings tools/power turbostat: Allow more use of is_hybrid flag tools/power turbostat: Rename "LLCkRPS" column to "LLCMRPS" tools/power turbostat.8: Document the "--force" option tools/power turbostat: Harden against unexpected values tools/power turbostat: Dump hypervisor name ... |
||
|
Linus Torvalds
|
f50822fd86 |
platform-drivers-x86 for v7.0-1
Highlights:
- amd/pmf:
- Avoid overwriting BIOS input values when events occur rapidly
- Fix PMF driver issues related to S4 (in part on crypto/ccp side)
- Add NPU metrics API (for accel side consumers)
- Allow disabling Smart PC function through a module parameter
- asus-wmi & HID/asus:
- Unification of backlight control (replaces quirks)
- Support multiple interfaces for controlling keyboard/RGB brightness
- Simplify init sequence
- hp-wmi:
- Add manual fan control for Victus S models
- Add fan mode keep-alive
- Fix platform profile values for Omen 16-wf1xxx
- Add EC offset to get the thermal profile
- intel/pmc: Show substate residencies also for non-primary PMCs
- intel/ISST:
- Store and restore data for all domains
- Write interface improvements
- lenovo-wmi:
- Support multiple Capability Data
- Add HWMON reporting and tuning support
- mellanox/mlx-platform: Add HI173 & HI174 support
- surface/aggregator_registry: Add Surface Pro 11 (QCOM)
- thinkpad_acpi: Add support for HW damage detection capability
- uniwill: Implement cTGP setting
- wmi:
- Introduce marshalling support
- Convert a few drivers to use the new buffer-based WMI API
- tools/power/x86/intel-speed-select: Allow read operations for non-root
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
amd/pmf:
- Added a module parameter to disable the Smart PC function
- Introduce new interface to export NPU metrics
- Prevent TEE errors after hibernate
- Use ring buffer to store custom BIOS input values
amd:
- Use scope-based cleanup for wbrf_record()
asus-wmi:
- add keyboard brightness event handler
- Add support for multiple kbd led handlers
- remove unused keyboard backlight quirk
crypto:
- ccp - Add an S4 restore flow
- ccp - Declare PSP dead if PSP_CMD_TEE_RING_INIT fails
- ccp - Factor out ring destroy handling to a helper
- ccp - Send PSP_CMD_TEE_RING_DESTROY when PSP_CMD_TEE_RING_INIT fails
HID: asus:
- add support for the asus-wmi brightness handler
- early return for ROG devices
- fortify keyboard handshake
- initialize additional endpoints only for certain devices
- listen to the asus-wmi brightness device instead of creating one
- move vendor initialization to probe
- simplify RGB init sequence
- use same report_id in response
hp-wmi:
- Add EC offsets to read Victus S thermal profile
- add manual fan control for Victus S models
- fix platform profile values for Omen 16-wf1xxx
- implement fan keep-alive
- order include headers
ideadpad-laptop:
- Clean up style warnings and checks
intel/pmc:
- Change LPM mode fields to u8
- Enable substate residencies for multiple PMCs
- Move LPM mode attributes to PMC
- Remove double empty line
intel/pmt:
- Replace sprintf() with sysfs_emit()
intel/uncore-freq:
- Replace sprintf() with scnprintf()
- Replace sprintf() with sysfs_emit()
intel-wmi-sbl-fw-update:
- Use new buffer-based WMI API
intel/wmi: thunderbolt:
- Use new buffer-based WMI API
ISST:
- Add missing write block check
- Check for admin capability for write commands
- Optimize suspend/resume callbacks
- Store and restore all domains data
lenovo-wmi-capdata:
- Add support for Capability Data 00
- Add support for Fan Test Data
lenovo-wmi-{capdata,other}:
- Fix HWMON channel visibility
- Support multiple Capability Data
lenovo-wmi-capdata:
- Wire up Fan Test Data
lenovo-wmi-helpers:
- Convert returned buffer into u32
lenovo-wmi-other:
- Add HWMON for fan reporting/tuning
mlx-platform:
- Add support DGX flavor of next-generation 800GB/s ethernet switch.
- Add support for new Nvidia DGX system based on class VMOD0010
Rename lenovo-wmi-capdata01 to lenovo-wmi-capdata:
- Rename lenovo-wmi-capdata01 to lenovo-wmi-capdata
surface: aggregator_registry:
- Add Surface Pro 11 (QCOM)
surface:
- Replace deprecated strcpy() in surface_button_add()
thinkpad_acpi:
- Add support to detect hardware damage detection capability.
- Add sysfs to display details of damaged device.
tools/power/x86/intel-speed-select:
- Allow non root users
- Fix file descriptor leak in isolate_cpus()
- Use pkg-config for libnl-3.0 detection
- v1.25 release
uniwill:
- Implement cTGP setting
uniwill-laptop:
- Introduce device descriptor system
wmi:
- Add helper functions for WMI string conversions
- Add kunit test for the marshalling code
- Add kunit test for the string conversion code
wmi-bmof:
- Use new buffer-based WMI API
wmi:
- Introduce marshalling support
wmi: string-kunit:
- Add missing oversized string test case
wmi:
- Update driver development guide
xiaomi-wmi:
- Use new buffer-based WMI API
yogabook:
- Clean up code style
Merges:
- Merge branch 'fixes' of into for-next
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into for-next
- Merge branch 'platform-drivers-x86-asus-kbd' into for-next
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaY9soAAKCRBZrE9hU+XO
MT5EAP9aK1wHlVGDfuC2k07X4gk8ZX5Ks9anXJlBcZFrpC9okwD5Aeqj3XLK338x
g5k/x+r87GwXjcBLnFi2TnNA2c8SWQY=
=eGAm
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"Highlights:
- amd/pmf:
- Avoid overwriting BIOS input values when events occur rapidly
- Fix PMF driver issues related to S4 (in part on crypto/ccp side)
- Add NPU metrics API (for accel side consumers)
- Allow disabling Smart PC function through a module parameter
- asus-wmi & HID/asus:
- Unification of backlight control (replaces quirks)
- Support multiple interfaces for controlling keyboard/RGB brightness
- Simplify init sequence
- hp-wmi:
- Add manual fan control for Victus S models
- Add fan mode keep-alive
- Fix platform profile values for Omen 16-wf1xxx
- Add EC offset to get the thermal profile
- intel/pmc: Show substate residencies also for non-primary PMCs
- intel/ISST:
- Store and restore data for all domains
- Write interface improvements
- lenovo-wmi:
- Support multiple Capability Data
- Add HWMON reporting and tuning support
- mellanox/mlx-platform: Add HI173 & HI174 support
- surface/aggregator_registry: Add Surface Pro 11 (QCOM)
- thinkpad_acpi: Add support for HW damage detection capability
- uniwill: Implement cTGP setting
- wmi:
- Introduce marshalling support
- Convert a few drivers to use the new buffer-based WMI API
- tools/power/x86/intel-speed-select: Allow read operations for non-root
- Miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (68 commits)
platform/x86: lenovo-wmi-{capdata,other}: Fix HWMON channel visibility
platform/x86: hp-wmi: Add EC offsets to read Victus S thermal profile
platform: mellanox: mlx-platform: Add support DGX flavor of next-generation 800GB/s ethernet switch.
platform: mellanox: mlx-platform: Add support for new Nvidia DGX system based on class VMOD0010
HID: asus: add support for the asus-wmi brightness handler
platform/x86: asus-wmi: add keyboard brightness event handler
platform/x86: asus-wmi: remove unused keyboard backlight quirk
HID: asus: listen to the asus-wmi brightness device instead of creating one
platform/x86: asus-wmi: Add support for multiple kbd led handlers
HID: asus: early return for ROG devices
HID: asus: move vendor initialization to probe
HID: asus: fortify keyboard handshake
HID: asus: use same report_id in response
HID: asus: initialize additional endpoints only for certain devices
HID: asus: simplify RGB init sequence
platform/wmi: string-kunit: Add missing oversized string test case
platform/x86/amd/pmf: Added a module parameter to disable the Smart PC function
platform/x86/uniwill: Implement cTGP setting
platform/x86: uniwill-laptop: Introduce device descriptor system
platform/x86/amd: Use scope-based cleanup for wbrf_record()
...
|