Test case test_adding_blacklisted ends in failure if the blacklisted
probe is of an assembler function with no DWARF available. At the same
time, probing the blacklisted function with ASM DWARF doesn't test the
blacklist itself as the failure is a result of the broken DWARF.
When the broken DWARF output is encountered, check if the probed
function was compiled by the assembler. If so, the broken DWARF message
is expected and does not report a perf issue, else report a failure. If
the ASM DWARF affected the probe, try the next probe on the blacklist.
If the first 5 probes are defective due to broken DWARF, skip the test
case.
Fixes: def5480d63 ("perf testsuite probe: Add test for blacklisted kprobes handling")
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241017161555.236769-1-vmolnaro@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's a very simply test just to run with cycles:P and instructions:P
events.
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Mingwei Zhang <mizhang@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20241016062359.264929-10-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The exclude_guest in the event attribute is to limit profiling in the
host environment. But I'm not sure why we want to set it by default
cause we don't care about it in most cases and I feel like it just
makes new PMU implementation complicated.
Of course it's useful for perf kvm command so I added the
exclude_GH_default variable to preserve the old behavior for perf kvm
and other commands like perf record and stat won't set the exclude bit.
This is helpful for AMD IBS case since having exclude_guest bit will
clear new feature bit due to the missing feature check logic.
$ sysctl kernel.perf_event_paranoid
kernel.perf_event_paranoid = 0
$ perf record -W -e ibs_op// -vv true 2>&1 | grep switching
switching off PERF_FORMAT_LOST support
switching off weight struct support
switching off bpf_event
switching off ksymbol
switching off cloexec flag
switching off mmap2
switching off exclude_guest, exclude_host
Intestingly, I found it sets the exclude_bit if "u" modifier is used.
I don't know why but it's neither intuitive nor consistent. Let's
remove the bit there too.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Mingwei Zhang <mizhang@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20241016062359.264929-3-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Commit 7b100989b4 ("perf evlist: Remove __evlist__add_default")
changed to parse "cycles:P" event instead of creating a new cycles
event for perf record. But it also changed the way how modifiers are
handled so it doesn't set the exclude_guest bit by default.
It seems Apple M1 PMU requires exclude_guest set and returns EOPNOTSUPP
if not. Let's add a fallback so that it can work with default events.
Also update perf stat hybrid tests to handle possible u or H modifiers.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Mingwei Zhang <mizhang@google.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20241016062359.264929-2-namhyung@kernel.org
Fixes: 7b100989b4 ("perf evlist: Remove __evlist__add_default")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Perf test case 84 'perf pipe recording and injection test'
sometime fails on s390, especially on z/VM virtual machines.
This is caused by a very short run time of workload
# perf test -w noploop
which runs for 1 second. Occasionally this is not long
enough and the perf report has no samples for symbol noploop.
Fix this and enlarge the runtime for the perf work load
to 3 seconds. This ensures the symbol noploop is always
present. Since only s390 is affected, make this loop
architecture dependend.
Output before:
Inject -b build-ids test
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.195 MB - ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.277 MB - ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.195 MB - ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.160 MB
/tmp/perf.data.ELzRdq (4031 samples) ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.195 MB - ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.195 MB - ]
Inject -b build-ids test [Success]
Inject --buildid-all build-ids test
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.195 MB - ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.014 MB - ]
Inject --buildid-all build-ids test [Failed - cannot find
noploop function in pipe #2]
Output after:
Successful execution for over 10 times in a loop.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Cc: agordeev@linux.ibm.com
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Link: https://lore.kernel.org/r/20241018081732.1391060-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Like in the metricgroup tests, it should check the permission first and
then skip relevant failures accordingly.
Also it needs to try again with the system wide flag properly. On the
second round, check if the result has the metric name because other
failure cases are checked in the first round already.
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241018204306.741972-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Now the attr tests are shell tests move the associated python and
configuration files. Update the installation build rules for the new
directories. Recycle the lib install rules for python files allowing
the explicit attr.py install line to be dropped.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241015000158.871828-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The "Setup struct perf_event_attr" test in attr.c does a bunch of
directory finding to set up running a python test that in general is
more brittle than similar logic we have in shell tests. Add a shell
test that invokes and runs the tests in the python attr.py script.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241015000158.871828-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
On my system, perf list is very slow to print the whole events. I think
there's a performance issue in SDT and uprobes event listing. I noticed
this issue while running perf test on x86 but it takes long to check
some CoreSight event which should be skipped quickly.
Anyway, some test uses perf list to check whether the required event is
available before running the test. The perf list command can take an
argument to specify event class or (glob) pattern. But glob pattern is
only to suppress output for unmatched ones after checking all events.
In this case, specifying event class is better to reduce the number of
events it checks and to avoid buggy subsystems entirely.
No functional changes intended.
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20241016065654.269994-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Command perf test 86 fails on s390:
# perf test -F 86
ping 868299 [007] 28248.013596: probe_libc:inet_pton_1: (3ff95948020)
3ff95948020 inet_pton+0x0 (inlined)
3ff9595e6e7 text_to_binary_address+0x1007 (inlined)
3ff9595e6e7 gaih_inet+0x1007 (inlined)
FAIL: expected backtrace entry \
"main\+0x[[:xdigit:]]+[[:space:]]\(.*/bin/ping.*\)$"
got "3ff9595e6e7 gaih_inet+0x1007 (inlined)"
86: probe libc's inet_pton & backtrace it with ping : FAILED!
#
The root cause is a new stack layout, two functions have been added
as seen below.
# perf script | tac | grep -m1 '^ping' -B9 | tac
ping 866856 [007] 25979.494921: probe_libc:inet_pton: (3ff8ec48020)
3ff8ec48020 inet_pton+0x0 (inlined)
new --> 3ff8ec5e6e7 text_to_binary_address+0x1007 (inlined)
new --> 3ff8ec5e6e7 gaih_inet+0x1007 (inlined)
3ff8ec5e6e7 getaddrinfo+0x1007 (/usr/lib64/libc.so.6)
2aa3fe04bf5 main+0xff5 (/usr/bin/ping)
3ff8eb34a5b __libc_start_call_main+0x8b (/usr/lib64/libc.so.6)
3ff8eb34b5d __libc_start_main@GLIBC_2.2+0xad (inlined)
2aa3fe06a1f [unknown] (/usr/bin/ping)
#
The new functions in the call chain are:
- text_to_binary_address()
- gaih_inet().
Both functions are inlined and do not show up in the output
of the nm command:
# nm -a /usr/lib64/libc.so.6 | \
grep -E '(text_to_binary_address|gaih_inet)$'
#
There is no possibility to add these 2 functions depending on their
existance in the C library.
Add text_to_binary_address() and gaih_inet() to the list of
expected functions in an compatible way and extend the regular
expression. On s390 the backtrace can now be
Before After
probe_libc:inet_pton probe_libc:inet_pton
inet_pton inet_pton
getaddrinfo getaddrinfo | text_to_binary_address
main main | gaih_inet
Output after:
# perf test -F 86
86: probe libc's inet_pton & backtrace it with ping : Ok
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: agordeev@linux.ibm.com
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Link: https://lore.kernel.org/r/20241001124224.3370306-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add more test cases to cover all supported topdown events regroup cases.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lore.kernel.org/r/20240913084712.13861-7-dapeng1.mi@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add counting and leader sampling tests to verify topdown events including
raw format can be reordered correctly.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lore.kernel.org/r/20240913084712.13861-6-dapeng1.mi@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add leader sampling test to validate event counts are captured into
record and the count value is consistent.
Suggested-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lore.kernel.org/r/20240913084712.13861-5-dapeng1.mi@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
perf test 70 takes a long time. One culprit is the output of command
perf annotate. Per default enabled are
- demangle symbol names
- interleave source code with assembly code.
Disable demangle of symbols and abort the annotation
after the first 250 lines.
This speeds up the test case considerable, for example
on s390:
Output before:
# time perf test 70
70: perf annotate basic tests : Ok
.....
real 2m7.467s
user 1m26.869s
sys 0m34.086s
#
Output after:
# time perf test 70
70: perf annotate basic tests : Ok
real 0m3.341s
user 0m1.606s
sys 0m0.362s
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: sumanthk@linux.ibm.com
Link: https://lore.kernel.org/r/20240917085706.249691-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Test that one cycles event is opened for each core PMU when "perf stat"
is run without arguments.
The event line can either be output as "pmu/cycles/" or just "cycles" if
there is only one PMU. Include 2 spaces for padding in the one PMU case
to avoid matching when the word cycles is included in metric
descriptions.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: ak@linux.intel.com
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240926144851.245903-8-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
PMUs aren't listed in /sys/devices/ on DT devices, so change the search
directory to /sys/bus/event_source/devices which works everywhere. Also
add armv8_cortex_* as a known PMU type to search for to make the test
run on more devices.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: ak@linux.intel.com
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240926144851.245903-7-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Without aggregation on Intel:
```
$ perf stat -e instructions,cycles ...
```
Will use "cycles" for the name of the legacy cycles event but as
"instructions" has a sysfs name it will and a "[cpu]" PMU suffix. This
often breaks things as the space between the event and the PMU name
look like an extra column. The existing uniquify logic was also
uniquifying in cases when all events are core and not with uncore
events, it was not correctly handling modifiers, etc.
Change the logic so that an initial pass that can disable
uniquification is run. For individual counters, disable uniquification
in more cases such as for consistency with legacy events or for
libpfm4 events. Don't use the "[pmu]" style suffix in uniquification,
always use "pmu/.../". Change how modifiers/terms are handled in the
uniquification so that they look like parse-able events.
This fixes "102: perf stat metrics (shadow stat) test:" that has been
failing due to "instructions [cpu]" breaking its column/awk logic when
values aren't aggregated. This started happening when instructions
could match a sysfs rather than a legacy event, so the fixes tag
reflects this.
Fixes: 617824a7f0 ("perf parse-events: Prefer sysfs/JSON hardware events over legacy")
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
[ Fix Intel TPEBS counting mode test ]
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: ak@linux.intel.com
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240926144851.245903-3-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Refactor code to have some more error diagnosis on traps, etc. and to
do less work on each line. Add an ignore situation for security failures.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20240925173013.12789-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Run a few samples through the disassembly script and check to see that
at least one branch instruction is printed.
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ruidong Tian <tianruidong@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Cc: John Garry <john.g.garry@oracle.com>
Cc: scclevenger@os.amperecomputing.com
Link: https://lore.kernel.org/r/20240916135743.1490403-8-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Previously "set -e" meant any non-zero exit code from perf stat would
cause a test failure. As a non-zero exit happens when there aren't
sufficient permissions, check for this case and make the exit code
2/skip for it.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20240502223115.2357499-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Thomas reported the vfs_getname perf tests failing on s/390, it seems it
was just to some extraneous '=' somehow getting into the regexp, remove
it, now:
root@x1:~# perf test getname
91: Add vfs_getname probe to get syscall args filenames : Ok
93: Use vfs_getname probe to get syscall args filenames : FAILED!
126: Check open filename arg using perf trace + vfs_getname : Ok
root@x1:~#
Second one remains a mistery, have to take some time to nail it down.
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>,
Link: https://lore.kernel.org/lkml/1d7f3b7b-9edc-4d90-955c-9345428563f1@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add -B option that lazily inserts mmap2 events thereby dropping all
mmap events without samples. This is similar to the behavior of -b
where only build_id events are inserted when a dso is accessed in a
sample.
File size savings can be significant in system-wide mode, consider:
$ perf record -g -a -o perf.data sleep 1
$ perf inject -B -i perf.data -o perf.new.data
$ ls -al perf.data perf.new.data
5147049 perf.data
2248493 perf.new.data
Give test coverage of the new option in pipe test.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Link: https://lore.kernel.org/r/20240909203740.143492-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an option that allows all mmap or mmap2 events to be rewritten as
mmap2 events with build IDs.
This is similar to the existing -b/--build-ids and --buildid-all options
except instead of adding a build_id event an existing mmap/mmap2 event
is used as a template and a new mmap2 event synthesized from it.
As mmap2 events are typical this avoids the insertion of build_id
events.
Add test coverage to the pipe test.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Link: https://lore.kernel.org/r/20240909203740.143492-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In probe_vfs_getname.sh, current we use "perf record --dry-run"
to check for libtraceevent and skip the test if perf is not
build with libtraceevent. Change the check to use "perf check feature"
option
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240904190132.415212-6-adityag@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we use output of 'perf version --build-options', to check
whether perf was built with libtraceevent support.
Instead, use 'perf check feature libtraceevent' to check for
libtraceevent support.
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240904190132.415212-5-adityag@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The probe command is dependent on libelf. Skip the test if the
required probe command isn't present.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/r/20240831070415.506194-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Additional pipe tests where piped files are written to disk. This
means that spotting a file name of "-" isn't a sufficient "is pipe?"
test.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240829150154.37929-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
$ sudo ./perf test filtering -vv
96: perf record sample filtering (by BPF) tests:
--- start ---
test child forked, pid 2966908
Checking BPF-filter privilege
Basic bpf-filter test
Basic bpf-filter test [Success]
Failing bpf-filter test
Failing bpf-filter test [Success]
Group bpf-filter test
Group bpf-filter test [Success]
Multiple bpf-filter test
Multiple bpf-filter test [Success]
Cgroup bpf-filter test
Cgroup bpf-filter test [Success]
---- end(0) ----
96: perf record sample filtering (by BPF) tests : Ok
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240826221045.1202305-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Shellcheck versions < v0.7.2 can't follow this path so add the helper to
fix the following warning:
In tests/shell/trace_btf_enum.sh line 13:
. "$(dirname $0)"/lib/probe.sh
^--------------------------^ SC1090: Can't follow non-constant source.
Use a directive to specify location.
Fixes: d66763fed3 ("perf test trace_btf_enum: Add regression test for the BTF augmentation of enums in 'perf trace'")
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240809095426.3065163-1-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new 'perf report' test case that acts as an entry element in 'perf
test list'.
Runs multiple subtests from directory "base_report", which can be
expanded without further editing.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-12-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test basic execution and some options of perf-report subcommand, like
show-nr-samples, header, showcpuutilization, pid and symbol filtering.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-11-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As a form of validation, it is a common practice to check the outputs
of commands whether they contain expected patterns or match a certain
regular expression.
This output checking helper is designed to allow checking stderr output
of perf commands for unexpected messages, while ignoring messages that
are known to be harmless, e.g.:
"Lowering default frequency rate to \d+\."
"\d+ out of order events recorded."
etc.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-10-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf-probe command uses a specific semantics to describe probes.
Test some patterns that are known to be both valid and invalid if
they are handled appropriately.
This test is run as a part of perftool-testsuite_probe test case.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-9-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test if various incompatible options are correctly handled-rejected.
It is run as a part of perftool-testsuite_probe test case.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-8-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test basic behavior of perf-probe subcommand. It is run as a part of
perftool-testsuite_probe test case.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-7-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test perf probe interface. Blacklisted functions should be rejected
when there is an attempt to set a kprobe to them.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-6-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Shellcheck is becoming a standard when building perf to prevent
any unnecessary mistakes. Fix shellcheck warnings in perf testsuite.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-5-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The getname_flags() routine changed recently and thus the place where we
were getting the pathname is not probeable anymore, albeit still
present, so use the next line for that, before:
root@number:/home/acme/git/perf-tools-next# perf test vfs_getname
91: Add vfs_getname probe to get syscall args filenames : FAILED!
93: Use vfs_getname probe to get syscall args filenames : FAILED!
126: Check open filename arg using perf trace + vfs_getname : FAILED!
root@number:/home/acme/git/perf-tools-next#
Now tests 91 and 126 are passing, some more investigation is needed for
test 93, that continues to fail.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add Multiple bpf-filter test for two or more events with filters.
It uses task-clock and page-faults events with different filter
expressions and check the perf script output
$ sudo ./perf test filtering -vv
96: perf record sample filtering (by BPF) tests:
--- start ---
test child forked, pid 2804025
Checking BPF-filter privilege
Basic bpf-filter test
Basic bpf-filter test [Success]
Failing bpf-filter test
Error: task-clock event does not have PERF_SAMPLE_CPU
Failing bpf-filter test [Success]
Group bpf-filter test
Error: task-clock event does not have PERF_SAMPLE_CPU
Error: task-clock event does not have PERF_SAMPLE_CODE_PAGE_SIZE
Group bpf-filter test [Success]
Multiple bpf-filter test
Multiple bpf-filter test [Success]
---- end(0) ----
96: perf record sample filtering (by BPF) tests : Ok
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240820154504.128923-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add it to the record.sh shell test to verify if it tracks cgroup
information correctly. It records with --all-cgroups option can check
if it has PERF_RECORD_CGROUP and the names are not "unknown".
$ sudo ./perf test -vv 95
95: perf record tests:
--- start ---
test child forked, pid 2871922
169c90-169cd0 g test_loop
perf does have symbol 'test_loop'
Basic --per-thread mode test
Basic --per-thread mode test [Success]
Register capture test
Register capture test [Success]
Basic --system-wide mode test
Basic --system-wide mode test [Success]
Basic target workload test
Basic target workload test [Success]
Branch counter test
branch counter feature not supported on all core PMUs (/sys/bus/event_source/devices/cpu) [Skipped]
Cgroup sampling test
Cgroup sampling test [Success]
---- end(0) ----
95: perf record tests : Ok
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240818212948.2873156-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test recording of call-graphs and injecting --build-all. Add/expand
trap handler.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Link: https://lore.kernel.org/r/20240817064442.2152089-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Subtest for system-wide record with '--threads=cpu' option fails due
to a limit of open file descriptors on systems with 128 or more CPUs
as the default limit is set to 1024.
The number of open file descriptors should be slightly above
nmb_events*nmb_cpus + nmb_cpus(for perf.data.n) + 4*nmb_cpus(for pipes),
which equals 8*nmb_cpus. Therefore, temporarily raise the limit to
16*nmb_cpus for the test.
Committer notes:
Instead of disabling ShellCheck warnings all the uses of 'uname -n',
i.e. those:
In tests/shell/record.sh line 35:
default_fd_limit=$(ulimit -Sn)
^-^ SC3045 (warning): In POSIX sh, ulimit -S is undefined.
We can just switch from using '/bin/sh' to '/bin/bash' for this test, as
bash _has_ 'ulimit -n', so ShellCheck will not emit that warning.
There are dozens of 'perf test' shell tests that do just that,
'/bin/bash' is a reasonable expectation for those tests.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Radostin Stoyanov <rstoyano@redhat.com>
Link: https://lore.kernel.org/linux-perf-users/20240429085721.10122-1-vmolnaro@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enhance the test case for the branch counter feature.
Now, the test verifies:
- The new filter can be successfully applied on the supported platforms.
- The counter value can be outputted via the perf report -D
- The counter value and the abbr name can be outputted via the
perf script (New)
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240813160208.2493643-10-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Help to better identify the location of test failures but dumping the
failing test in the trap handler.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240813040613.882075-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel TPEBS sampling mode is supported through perf record. The counting mode
code uses perf record to capture retire_latency value and use it in metric
calculation. This test checks the counting mode code on Intel platforms.
Committer testing:
root@x1:~# perf test tpebs
123: test Intel TPEBS counting mode : Ok
root@x1:~# set -o vi
root@x1:~# perf test tpebs
123: test Intel TPEBS counting mode : Ok
root@x1:~# perf test -v tpebs
123: test Intel TPEBS counting mode : Ok
root@x1:~# perf test -vvv tpebs
123: test Intel TPEBS counting mode:
--- start ---
test child forked, pid 16603
Testing without --record-tpebs
Testing with --record-tpebs
---- end(0) ----
123: test Intel TPEBS counting mode : Ok
root@x1:~#
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Weilin Wang <weilin.wang@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Samantha Alt <samantha.alt@intel.com>
Link: https://lore.kernel.org/r/20240720062102.444578-9-weilin.wang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running on a:
root@x1:~# grep 'model name' -m1 /proc/cpuinfo
model name : 13th Gen Intel(R) Core(TM) i7-1365U
root@x1:~#
It skips all the tests with:
root@x1:~# perf test -vvvv LBR
97: perf record LBR tests:
--- start ---
test child forked, pid 2033388
Skip: only x86 CPUs support LBR
---- end(-2) ----
97: perf record LBR tests : Skip
root@x1:~#
Because the test checks for the /sys/devices/cpu/caps/branches file,
that isn't present as we have instead:
root@x1:~# ls -la /sys/devices/cpu*/caps/branches
-r--r--r--. 1 root root 4096 Aug 8 11:22 /sys/devices/cpu_atom/caps/branches
-r--r--r--. 1 root root 4096 Aug 8 11:21 /sys/devices/cpu_core/caps/branches
root@x1:~#
If we check as well for one of those,
/sys/devices/cpu_core/caps/branches, then we don't skip the tests and
all are run on these x86 Intel Hybrid systems as well, passing all of
them:
root@x1:~# perf test -vvvv LBR
97: perf record LBR tests:
--- start ---
test child forked, pid 2034956
LBR callgraph
[ perf record: Woken up 5 times to write data ]
[ perf record: Captured and wrote 1.812 MB /tmp/__perf_test.perf.data.B2HvQ (8114 samples) ]
LBR callgraph [Success]
LBR any branch test
[ perf record: Woken up 25 times to write data ]
[ perf record: Captured and wrote 6.382 MB /tmp/__perf_test.perf.data.B2HvQ (8071 samples) ]
LBR any branch test: 8071 samples
LBR any branch test [Success]
LBR any call test
[ perf record: Woken up 23 times to write data ]
[ perf record: Captured and wrote 6.208 MB /tmp/__perf_test.perf.data.B2HvQ (8092 samples) ]
LBR any call test: 8092 samples
LBR any call test [Success]
LBR any ret test
[ perf record: Woken up 24 times to write data ]
[ perf record: Captured and wrote 6.396 MB /tmp/__perf_test.perf.data.B2HvQ (8093 samples) ]
LBR any ret test: 8093 samples
LBR any ret test [Success]
LBR any indirect call test
[ perf record: Woken up 25 times to write data ]
[ perf record: Captured and wrote 6.344 MB /tmp/__perf_test.perf.data.B2HvQ (8067 samples) ]
LBR any indirect call test: 8067 samples
LBR any indirect call test [Success]
LBR any indirect jump test
[ perf record: Woken up 12 times to write data ]
[ perf record: Captured and wrote 3.073 MB /tmp/__perf_test.perf.data.B2HvQ (8061 samples) ]
LBR any indirect jump test: 8061 samples
LBR any indirect jump test [Success]
LBR direct calls test
[ perf record: Woken up 25 times to write data ]
[ perf record: Captured and wrote 6.380 MB /tmp/__perf_test.perf.data.B2HvQ (8076 samples) ]
LBR direct calls test: 8076 samples
LBR direct calls test [Success]
LBR any indirect user call test
[ perf record: Woken up 5 times to write data ]
[ perf record: Captured and wrote 1.597 MB /tmp/__perf_test.perf.data.B2HvQ (8079 samples) ]
LBR any indirect user call test: 8079 samples
LBR any indirect user call test [Success]
LBR system wide any branch test
[ perf record: Woken up 26 times to write data ]
[ perf record: Captured and wrote 9.088 MB /tmp/__perf_test.perf.data.B2HvQ (9209 samples) ]
LBR system wide any branch test: 9209 samples
LBR system wide any branch test [Success]
LBR system wide any call test
[ perf record: Woken up 25 times to write data ]
[ perf record: Captured and wrote 8.945 MB /tmp/__perf_test.perf.data.B2HvQ (9333 samples) ]
LBR system wide any call test: 9333 samples
LBR system wide any call test [Success]
LBR parallel any branch test
LBR parallel any call test
LBR parallel any ret test
LBR parallel any indirect call test
LBR parallel any indirect jump test
LBR parallel direct calls test
LBR parallel system wide any branch test
LBR parallel any indirect user call test
LBR parallel system wide any call test
[ perf record: Woken up 9 times to write data ]
[ perf record: Woken up 51 times to write data ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Woken up 5 times to write data ]
[ perf record: Woken up 559 times to write data ]
[ perf record: Woken up 14 times to write data ]
[ perf record: Woken up 17 times to write data ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Woken up 11 times to write data ]
[ perf record: Captured and wrote 0.150 MB /tmp/__perf_test.perf.data.lANpR (1909 samples) ]
[ perf record: Captured and wrote 2.371 MB /tmp/__perf_test.perf.data.Olum8 (3033 samples) ]
[ perf record: Captured and wrote 1.230 MB /tmp/__perf_test.perf.data.njfJ8 (1742 samples) ]
[ perf record: Captured and wrote 5.554 MB /tmp/__perf_test.perf.data.4ZTrj (29662 samples) ]
[ perf record: Captured and wrote 19.906 MB /tmp/__perf_test.perf.data.dlGQt (29576 samples) ]
[ perf record: Captured and wrote 0.289 MB /tmp/__perf_test.perf.data.CAT7y (4311 samples) ]
[ perf record: Captured and wrote 3.129 MB /tmp/__perf_test.perf.data.diuKG (3971 samples) ]
LBR parallel any indirect user call test: 1909 samples
[ perf record: Captured and wrote 4.858 MB /tmp/__perf_test.perf.data.sVjtN (6130 samples) ]
LBR parallel any indirect user call test [Success]
[ perf record: Captured and wrote 3.669 MB /tmp/__perf_test.perf.data.AJtNI (4827 samples) ]
LBR parallel any indirect jump test: 4311 samples
LBR parallel any indirect jump test [Success]
LBR parallel direct calls test: 3033 samples
LBR parallel direct calls test [Success]
LBR parallel any indirect call test: 1742 samples
LBR parallel any indirect call test [Success]
LBR parallel any call test: 4827 samples
LBR parallel any call test [Success]
LBR parallel any branch test: 6130 samples
LBR parallel any branch test [Success]
LBR parallel system wide any branch test: 29662 samples
LBR parallel any ret test: 3971 samples
LBR parallel any ret test [Success]
LBR parallel system wide any branch test [Success]
LBR parallel system wide any call test: 29576 samples
LBR parallel system wide any call test [Success]
---- end(0) ----
97: perf record LBR tests : Ok
root@x1:~#
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZrTXftup0H46R8WK@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adds coverage for LBR operations and LBR callgraph.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240808054644.1286065-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In 'perf ftrace profile sleep 0.1' we know that we'll have an specific
kernel function that will take a bit more than 0.1 seconds and will take
place just one time, so we can add a check for that so that we validate
more than just the presence of some functions in the profile.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/lkml/ZrTBo7KACZeuCyLj@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now it can run the BPF filtering test with normal user if the BPF
objects are pinned by 'sudo perf record --setup-filter pin'. Let's
update the test case to verify the behavior. It'll skip the test if the
filter check is failed from a normal user, but it shows a message how to
set up the filters.
First, run the test as a normal user and it fails.
$ perf test -vv filtering
95: perf record sample filtering (by BPF) tests:
--- start ---
test child forked, pid 425677
Checking BPF-filter privilege
try 'sudo perf record --setup-filter pin' first. <<<--- here
bpf-filter test [Skipped permission]
---- end(-2) ----
95: perf record sample filtering (by BPF) tests : Skip
According to the message, run the perf record command to pin the BPF
objects.
$ sudo perf record --setup-filter pin
And re-run the test as a normal user.
$ perf test -vv filtering
95: perf record sample filtering (by BPF) tests:
--- start ---
test child forked, pid 424486
Checking BPF-filter privilege
Basic bpf-filter test
Basic bpf-filter test [Success]
Failing bpf-filter test
Error: task-clock event does not have PERF_SAMPLE_CPU
Failing bpf-filter test [Success]
Group bpf-filter test
Error: task-clock event does not have PERF_SAMPLE_CPU
Error: task-clock event does not have PERF_SAMPLE_CODE_PAGE_SIZE
Group bpf-filter test [Success]
---- end(0) ----
95: perf record sample filtering (by BPF) tests : Ok
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20240703223035.2024586-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a check to return the metric validation test early when perf list metric
does not output any metric. This would happen when NO_JEVENTS=1 is set or in a
system that there is no metric supported.
Signed-off-by: Weilin Wang <weilin.wang@intel.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Samantha Alt <samantha.alt@intel.com>
Link: https://lore.kernel.org/lkml/20240522204254.1841420-1-weilin.wang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test has been failing for some time when two separate runs of
perf benchmarks are recorded for cycles events and their counts are
compared, while once the recording was done with option --bpf-counters
and once without it. It is expected that the count of the samples
should be within a certain range, firstly the difference was set to be
within 10%, which was then later raised to 20%. However, the test case
keeps failing on certain architectures as recording the provided
benchmark can produce completely different counts based on the
current load of the system.
Sampling two separate runs on intel-eaglestream-spr-13 of "perf stat
--no-big-num -e cycles -- perf bench sched messaging -g 1 -l 100 -t":
Performance counter stats for 'perf bench sched messaging -g 1 -l 100 -t':
396782898 cycles
0.010051983 seconds time elapsed
0.008664000 seconds user
0.097058000 seconds sys
Performance counter stats for 'perf bench sched messaging -g 1 -l 100 -t':
1431133032 cycles
0.021803714 seconds time elapsed
0.023377000 seconds user
0.349918000 seconds sys
, which is ranging from 400mil to 1400mil samples.
Instead of recording the cycles use instructions event, which provides
more stable values. At the same time change the tested workload to one
of the provided testing workloads by perf that is not based on a
scheduler, which can provide another dependency on the current load.
Sampling instructions event with the new workload provide much more
stable results on intel-eaglestream-spr-13 of "perf stat --no-big-num
-e instructions -- perf test -w brstack":
Performance counter stats for 'perf test -w brstack':
64584494 instructions
0.009173945 seconds time elapsed
0.007262000 seconds user
0.002071000 seconds sys
Performance counter stats for 'perf test -w brstack':
64672669 instructions
0.008888135 seconds time elapsed
0.005018000 seconds user
0.004018000 seconds sys
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: mpetlan@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240625092001.10909-1-vmolnaro@redhat.com
Test "perf probe of function from different CU" only checks if the perf
command has failed and doesn't test the --funcs output. In the issue
reported in the previous commit, the garbage output of the --funcs
command was being ignored by the test when it could have been caught.
The script first makes use of --funcs option with the perf probe command
to check if the function "foo" exists in the testfile before adding a
probe to it in the next command. The output of probe...--funcs command
is redirected to stdout, therefore, add '| grep "foo"' to validate the
result.
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: anshuman.khandual@arm.com
Cc: james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240601125946.1741414-11-ChaitanyaS.Prakash@arm.com
The 2 second sleep can cause the test to fail on very slow network file
systems because Perf ends up being killed before it finishes starting
up.
Fix it by making the leafloop workload end after a fixed time like the
other workloads so there is no need to kill it after 2 seconds.
Also remove the 1 second start sampling delay because it is similarly
fragile. Instead, search through all samples for a matching one, rather
than just checking the first sample and hoping it's in the right place.
Fixes: cd6382d827 ("perf test arm64: Test unwinding using fame-pointer (fp) mode")
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: German Gomez <german.gomez@arm.com>
Cc: Spoorthy S <spoorts2@in.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240612140316.3006660-1-james.clark@arm.com
Running "perftool-testsuite_probe" fails as below:
./perf test -v "perftool-testsuite_probe"
83: perftool-testsuite_probe : FAILED
There are three fails:
1. Regexp not found: "\s*probe:inode_permission(?:_\d+)?\s+\(on inode_permission(?:[:\+][0-9A-Fa-f]+)?@.+\)"
-- [ FAIL ] -- perf_probe :: test_adding_kernel :: listing added probe :: perf probe -l (output regexp parsing)
2. Regexp not found: "probe:vfs_mknod"
Regexp not found: "probe:vfs_create"
Regexp not found: "probe:vfs_rmdir"
Regexp not found: "probe:vfs_link"
Regexp not found: "probe:vfs_write"
-- [ FAIL ] -- perf_probe :: test_adding_kernel :: wildcard adding support (command exitcode + output regexp parsing)
3. Regexp not found: "Failed to find"
Regexp not found: "somenonexistingrandomstuffwhichisalsoprettylongorevenlongertoexceed64"
Regexp not found: "in this function|at this address"
Line did not match any pattern: "The /boot/vmlinux file has no debug information."
Line did not match any pattern: "Rebuild with CONFIG_DEBUG_INFO=y, or install an appropriate debuginfo package."
These three tests depends on kernel debug info.
1. Fail 1 expects file name along with probe which needs debuginfo
2. Fail 2 :
perf probe -nf --max-probes=512 -a 'vfs_* $params'
Debuginfo-analysis is not supported.
Error: Failed to add events.
3. Fail 3 :
perf probe 'vfs_read somenonexistingrandomstuffwhichisalsoprettylongorevenlongertoexceed64'
Debuginfo-analysis is not supported.
Error: Failed to add events.
There is already helper function skip_if_no_debuginfo in
lib/probe_vfs_getname.sh which does perf probe and returns
"2" if debug info is not present. Use the skip_if_no_debuginfo
function and skip only the three tests which needs debuginfo
based on the result.
With the patch:
83: perftool-testsuite_probe:
--- start ---
test child forked, pid 3927
-- [ PASS ] -- perf_probe :: test_adding_kernel :: adding probe inode_permission ::
-- [ PASS ] -- perf_probe :: test_adding_kernel :: adding probe inode_permission :: -a
-- [ PASS ] -- perf_probe :: test_adding_kernel :: adding probe inode_permission :: --add
-- [ PASS ] -- perf_probe :: test_adding_kernel :: listing added probe :: perf list
Regexp not found: "\s*probe:inode_permission(?:_\d+)?\s+\(on inode_permission(?:[:\+][0-9A-Fa-f]+)?@.+\)"
-- [ SKIP ] -- perf_probe :: test_adding_kernel :: 2 2 Skipped due to missing debuginfo :: testcase skipped
-- [ PASS ] -- perf_probe :: test_adding_kernel :: using added probe
-- [ PASS ] -- perf_probe :: test_adding_kernel :: deleting added probe
-- [ PASS ] -- perf_probe :: test_adding_kernel :: listing removed probe (should NOT be listed)
-- [ PASS ] -- perf_probe :: test_adding_kernel :: dry run :: adding probe
-- [ PASS ] -- perf_probe :: test_adding_kernel :: force-adding probes :: first probe adding
-- [ PASS ] -- perf_probe :: test_adding_kernel :: force-adding probes :: second probe adding (without force)
-- [ PASS ] -- perf_probe :: test_adding_kernel :: force-adding probes :: second probe adding (with force)
-- [ PASS ] -- perf_probe :: test_adding_kernel :: using doubled probe
-- [ PASS ] -- perf_probe :: test_adding_kernel :: removing multiple probes
Regexp not found: "probe:vfs_mknod"
Regexp not found: "probe:vfs_create"
Regexp not found: "probe:vfs_rmdir"
Regexp not found: "probe:vfs_link"
Regexp not found: "probe:vfs_write"
-- [ SKIP ] -- perf_probe :: test_adding_kernel :: 2 2 Skipped due to missing debuginfo :: testcase skipped
Regexp not found: "Failed to find"
Regexp not found: "somenonexistingrandomstuffwhichisalsoprettylongorevenlongertoexceed64"
Regexp not found: "in this function|at this address"
Line did not match any pattern: "The /boot/vmlinux file has no debug information."
Line did not match any pattern: "Rebuild with CONFIG_DEBUG_INFO=y, or install an appropriate debuginfo package."
-- [ SKIP ] -- perf_probe :: test_adding_kernel :: 2 2 Skipped due to missing debuginfo :: testcase skipped
-- [ PASS ] -- perf_probe :: test_adding_kernel :: function with retval :: add
-- [ PASS ] -- perf_probe :: test_adding_kernel :: function with retval :: record
-- [ PASS ] -- perf_probe :: test_adding_kernel :: function argument probing :: script
## [ PASS ] ## perf_probe :: test_adding_kernel SUMMARY
---- end(0) ----
83: perftool-testsuite_probe : Ok
Only the three specific tests are skipped and remaining
ran successfully.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: akanksha@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240617122121.7484-1-atrajeev@linux.vnet.ibm.com
On some s390 linux machine (mostly older models) and with debug
packages installed, the test case 'perf annotate basic tests' runs
for some longer time.
Speed up the test and save the output of command perf annotate
in a temporary file. This is used to perform pattern matching via
grep command. This saves on invocation of perf annotate which
runs for some time.
Output before:
# time bash -x tests/shell/annotate.sh >/dev/null 2>&1; echo EXIT CODE $?
real 4m35.543s
user 3m19.442s
sys 1m14.322s
EXIT CODE 0
#
Output after:
# time bash -x tests/shell/annotate.sh >/dev/null 2>&1; echo EXIT CODE $?
real 2m2.881s
user 1m30.980s
sys 0m30.684s
EXIT CODE 0
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Cc: svens@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240607054352.2774936-1-tmricht@linux.ibm.com
These tests record in a mode that includes kernel trace but look for
samples of a userspace process. This makes them sensitive to any kernel
compilation options that increase the amount of time spent in the
kernel. If the trace buffer is completely filled before userspace is
reached then the test will fail. Double the buffer size to fix this.
The other tests in the same file aren't sensitive to this for various
reasons, for example the iterate devices test filters by userspace trace
only. But in order to keep coverage of all the modes, increase the
buffer size rather than filtering by userspace for the basic tests.
Fixes: d1efa4a0a6 ("perf cs-etm: Add separate decode paths for timeless and per-thread modes")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240326113749.257250-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Refactor test to better enable sharing of logic, to give an idea of
progress and introduce test functions. Add test of measuring both
cycles and cycles:b simultaneously.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240416170014.985191-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This check can be done with uname which is more portable. At the same
time re-arrange it into a standard if statement so that it's more
readable.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Spoorthy S <spoorts2@in.ibm.com>
Link: https://lore.kernel.org/r/20240410103458.813656-5-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Per-thread mode requires either system-wide (-a), a pid (-p) or a tid
(-t).
The stat output tests were using system-wide mode but this is racy when
threads are starting and exiting - something that happens a lot when
running the tests in parallel (perf test -p).
Avoid the race conditions by using pid mode with the pid of the parent
process.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240301074639.2260708-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf test -vv Symbols is used to indentify symbols within the perf
binary. Add the -F flag so that the test command doesn't fork the test
before running. This removes a little overhead.
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-4-irogers@google.com
As a form of validation, it is a common practice to check the outputs
of commands whether they contain expected patterns or match a certain
regex.
Add helpers for verifying that all regexes are found in the output, that
all lines match any pattern from a set and that a certain expression is
not present in the output.
In verbose mode these helpers log mismatches for easier failure
investigation.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: kjain@linux.ibm.com
Cc: atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240215110231.15385-6-mpetlan@redhat.com
Add new perf probe test case that acts as an entry element in perf test
list. Runs multiple subtests from directory "base_probe", which will be
added in incomming patches and can be expanded without further editing.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: kjain@linux.ibm.com
Cc: atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240215110231.15385-5-mpetlan@redhat.com
Unify perf regexes for checking testing output into a single file
to reduce duplicates and prevent errors when editing.
This will be used in upcomming patches in shell tests.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: kjain@linux.ibm.com
Cc: atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240215110231.15385-2-mpetlan@redhat.com
Some platforms have 'cluster' topology and CPUs in the cluster will
share resources like L3 Cache Tag (for HiSilicon Kunpeng SoC) or L2
cache (for Intel Jacobsville). Currently parsing and building cluster
topology have been supported since [1].
perf stat has already supported aggregation for other topologies like
die or socket, etc. It'll be useful to aggregate per-cluster to find
problems like L3T bandwidth contention.
This patch add support for "--per-cluster" option for per-cluster
aggregation. Also update the docs and related test. The output will
be like:
[root@localhost tmp]# perf stat -a -e LLC-load --per-cluster -- sleep 5
Performance counter stats for 'system wide':
S56-D0-CLS158 4 1,321,521,570 LLC-load
S56-D0-CLS594 4 794,211,453 LLC-load
S56-D0-CLS1030 4 41,623 LLC-load
S56-D0-CLS1466 4 41,646 LLC-load
S56-D0-CLS1902 4 16,863 LLC-load
S56-D0-CLS2338 4 15,721 LLC-load
S56-D0-CLS2774 4 22,671 LLC-load
[...]
On a legacy system without cluster or cluster support, the output will
be look like:
[root@localhost perf]# perf stat -a -e cycles --per-cluster -- sleep 1
Performance counter stats for 'system wide':
S56-D0-CLS0 64 18,011,485 cycles
S7182-D0-CLS0 64 16,548,835 cycles
Note that this patch doesn't mix the cluster information in the outputs
of --per-core to avoid breaking any tools/scripts using it.
Note that perf recently supports "--per-cache" aggregation, but it's not
the same with the cluster although cluster CPUs may share some cache
resources. For example on my machine all clusters within a die share the
same L3 cache:
$ cat /sys/devices/system/cpu/cpu0/cache/index3/shared_cpu_list
0-31
$ cat /sys/devices/system/cpu/cpu0/topology/cluster_cpus_list
0-3
[1] commit c5e22feffd ("topology: Represent clusters of CPUs within a die")
Tested-by: Jie Zhan <zhanjie9@hisilicon.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: james.clark@arm.com
Cc: 21cnbao@gmail.com
Cc: prime.zeng@hisilicon.com
Cc: Jonathan.Cameron@huawei.com
Cc: fanghao11@huawei.com
Cc: linuxarm@huawei.com
Cc: tim.c.chen@intel.com
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240208024026.2691-1-yangyicong@huawei.com
stat+std_output.sh test fails on my arm64 machine:
[root@localhost shell]# ./stat+std_output.sh
Checking STD output: no args Unknown event name in TopDownL1 # 0.18 retiring
[root@localhost shell]# ./stat+std_output.sh
Checking STD output: no args [Success]
Checking STD output: system wide [Success]
Checking STD output: interval [Success]
Checking STD output: per thread Unknown event name in tmux: server-1114960 # 0.41 frontend_bound
When no args specified `perf stat` will add TopdownL1 metric group
and the output will be like:
[root@localhost shell]# perf stat -- stress-ng --vm 1 --timeout 1
stress-ng: info: [3351733] setting to a 1 second run per stressor
stress-ng: info: [3351733] dispatching hogs: 1 vm
stress-ng: info: [3351733] successful run completed in 1.02s
Performance counter stats for 'stress-ng --vm 1 --timeout 1':
1,037.71 msec task-clock # 1.000 CPUs utilized
13 context-switches # 12.528 /sec
1 cpu-migrations # 0.964 /sec
67,544 page-faults # 65.090 K/sec
2,691,932,561 cycles # 2.594 GHz (74.56%)
6,571,333,653 instructions # 2.44 insn per cycle (74.92%)
521,863,142 branches # 502.901 M/sec (75.21%)
425,879 branch-misses # 0.08% of all branches (87.57%)
TopDownL1 # 0.61 retiring (87.67%)
# 0.03 frontend_bound (87.67%)
# 0.02 bad_speculation (87.67%)
# 0.34 backend_bound (74.61%)
1.038138390 seconds time elapsed
0.844849000 seconds user
0.189053000 seconds sys
Metrics in group TopDownL1 don't have event name on arm64 but are not
listed in the $skip_metric list which they should be listed. Add them
to the skip list as what does for x86 platforms in [1].
[1] commit 4d60e83dfc ("perf test: Skip metrics w/o event name in stat STD output linter")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: linuxarm@huawei.com
Cc: kan.liang@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240207091222.54096-1-yangyicong@huawei.com
The original test report was too complicated to read with information
that not really useful. This new update simplify the report which should
largely improve the readibility.
Signed-off-by: Weilin Wang <weilin.wang@intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240130180907.639729-1-weilin.wang@intel.com
The daemon signal test sends signals and then expects files to be
written. It was observed on an Intel Alderlake that the signals were
sent too quickly leading to the 3 expected files not appearing.
To avoid this send the next signal only after the expected previous file
has appeared. To avoid an infinite loop the number of retries is
limited.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Shirisha G <shirisha@linux.ibm.com>
Link: https://lore.kernel.org/r/20240124043015.1388867-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
"grep -cv" can exit with an error code that causes the "set -e" to abort
the script. Switch to using the grep exit code in the if condition to
avoid this.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Shirisha G <shirisha@linux.ibm.com>
Link: https://lore.kernel.org/r/20240124043015.1388867-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Write the JSON output to a specific file to avoid debug output
breaking it.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Shirisha G <shirisha@linux.ibm.com>
Link: https://lore.kernel.org/r/20240124043015.1388867-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In linux next repo, test case 'perf script tests' fails on s390.
The root case is a command line invocation of 'perf record' with
call-graph information. On s390 only DWARF formatted call-graphs are
supported and only on software events.
Change the command line parameters for s390.
Output before:
# perf test 89
89: perf script tests : FAILED!
#
Output after:
# perf test 89
89: perf script tests : Ok
#
Fixes: 0dd5041c9a ("perf addr_location: Add init/exit/copy functions")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20240125100351.936262-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Even though this is a frame pointer unwind test, it's testing that a
frame pointer stack can be augmented correctly with a partial
Dwarf unwind. So add a feature check so that this test skips instead of
fails if Dwarf unwinding isn't present.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Spoorthy S <spoorts2@in.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Link: https://lore.kernel.org/r/20240123163903.350306-3-james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
This test case often fails on s390 (about 2 out of 10) because the
10% percent limit on the difference between --bpf-counters event counting
and s390 hardware counting is more than 10% in all failure cases.
Raise the limit to 20% on s390 and the test case succeeds.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Cc: svens@linux.ibm.com
Link: https://lore.kernel.org/r/20240108084009.3959211-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Start a new set of shell tests for testing perf script. The initial
contribution is checking that some perf db-export functionality works
as reported in this regression by Ben Gainey <ben.gainey@arm.com>:
https://lore.kernel.org/lkml/20231207140911.3240408-1-ben.gainey@arm.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ben Gainey <ben.gainey@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231207174057.1482161-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The diff test depends on finding the symbol test_loop in perf and will
fail if perf has been stripped and no debug object is available. In that
case, skip the test instead.
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231205164924.835682-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are some old bug reports on perf diff crashing:
https://rhaas.blogspot.com/2012/06/perf-good-bad-ugly.html
Happening across them I was prompted to add two very basic tests that
will give some 'perf diff' coverage.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231120190408.281826-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test that JSON output produces valid JSON.
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231129213428.2227448-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid replicated logic by having a common library to set the PYTHON
environment variable.
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231129213428.2227448-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test "probe libc's inet_pton & backtrace it with ping" fails on
powerpc as below:
# perf test -v "probe libc's inet_pton & backtrace it with
ping"
85: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 96028
ping 96056 [002] 127271.101961: probe_libc:inet_pton: (7fffa1779a60)
7fffa1779a60 __GI___inet_pton+0x0 (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
7fffa172a73c getaddrinfo+0x121c (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
FAIL: expected backtrace entry
"gaih_inet.*\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/glibc-hwcaps/power10/libc.so.6\)$"
got "7fffa172a73c getaddrinfo+0x121c (/usr/lib64/glibc-hwcaps/power10/libc.so.6)"
test child finished with -1
---- end ----
probe libc's inet_pton & backtrace it with ping: FAILED!
This test installs a probe on libc's inet_pton function, which will use
uprobes and then uses perf trace on a ping to localhost. It gets 3
levels deep backtrace and checks whether it is what we expected or not.
The test started failing from RHEL 9.4 where as it works in previous
distro version (RHEL 9.2). Test expects gaih_inet function to be part of
backtrace. But in the glibc version (2.34-86) which is part of distro
where it fails, this function is missing and hence the test is failing.
From nm and ping command output we can confirm that gaih_inet function
is not present in the expected backtrace for glibc version glibc-2.34-86
[root@xxx perf]# nm /usr/lib64/glibc-hwcaps/power10/libc.so.6 | grep gaih_inet
00000000001273e0 t gaih_inet_serv
00000000001cd8d8 r gaih_inet_typeproto
[root@xxx perf]# perf script -i /tmp/perf.data.6E8
ping 104048 [000] 128582.508976: probe_libc:inet_pton: (7fff83779a60)
7fff83779a60 __GI___inet_pton+0x0 (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
7fff8372a73c getaddrinfo+0x121c (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
11dc73534 [unknown] (/usr/bin/ping)
7fff8362a8c4 __libc_start_call_main+0x84 (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
FAIL: expected backtrace entry
"gaih_inet.*\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/glibc-hwcaps/power10/libc.so.6\)$"
got "7fff9d52a73c getaddrinfo+0x121c (/usr/lib64/glibc-hwcaps/power10/libc.so.6)"
With version glibc-2.34-60 gaih_inet function is present as part of the
expected backtrace. So we cannot just remove the gaih_inet function from
the backtrace.
[root@xxx perf]# nm /usr/lib64/glibc-hwcaps/power10/libc.so.6 | grep gaih_inet
0000000000130490 t gaih_inet.constprop.0
000000000012e830 t gaih_inet_serv
00000000001d45e4 r gaih_inet_typeproto
[root@xxx perf]# ./perf script -i /tmp/perf.data.b6S
ping 67906 [000] 22699.591699: probe_libc:inet_pton_3: (7fffbdd80820) 7fffbdd80820 __GI___inet_pton+0x0
(/usr/lib64/glibc-hwcaps/power10/libc.so.6) 7fffbdd31160 gaih_inet.constprop.0+0xcd0
(/usr/lib64/glibc-hwcaps/power10/libc.so.6) 7fffbdd31c7c getaddrinfo+0x14c
(/usr/lib64/glibc-hwcaps/power10/libc.so.6) 1140d3558 [unknown] (/usr/bin/ping)
This patch solves this issue by doing a conditional skip. If there is a
gaih_inet function present in the libc then it will be added to the
expected backtrace else the function will be skipped from being added
to the expected backtrace.
Output with the patch
[root@xxx perf]# ./perf test -v "probe libc's inet_pton & backtrace it
with ping"
83: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 102662
ping 102692 [000] 127935.549973: probe_libc:inet_pton: (7fff93379a60)
7fff93379a60 __GI___inet_pton+0x0 (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
7fff9332a73c getaddrinfo+0x121c (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
11ef03534 [unknown] (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
Reported-by: Disha Goel <disgoel@linux.ibm.com>
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Likhitha Korrapati <likhitha@linux.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20231126070914.175332-1-likhitha@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf data symbol test depends on finding symbol buf1 in perf, and fails if
perf has been stripped and no debug object is available. In that case, skip
the test instead.
Example:
Before:
$ strip tools/perf/perf
$ tools/perf/perf buildid-cache -p `realpath tools/perf/perf`
$ tools/perf/perf test -v 'data symbol'
113: Test data symbol :
--- start ---
test child forked, pid 125646
Recording workload...
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.577 MB /tmp/__perf_test.perf.data.Jhbdp (7794 samples) ]
Cleaning up files...
test child finished with -1
---- end ----
Test data symbol: FAILED!
After:
$ tools/perf/perf test -v 'data symbol'
113: Test data symbol :
--- start ---
test child forked, pid 125747
perf does not have symbol 'buf1'
perf is missing symbols - skipping test
test child finished with -2
---- end ----
Test data symbol: Skip
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231123075848.9652-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf data symbol test waits 1 second for perf to run and collect data,
which may be too little if perf takes a long time to start up, which has
been noticed on systems with many CPUs. Use existing wait_for_perf_to_start
helper to wait for perf to start.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231123075848.9652-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test "Check branch stack sampling" depends on finding symbol
brstack_bench (and several others) in perf, and fails if perf has been
stripped and no debug object is available. In that case, skip the test
instead.
Example:
Before:
$ strip tools/perf/perf
$ tools/perf/perf buildid-cache -p `realpath tools/perf/perf`
$ tools/perf/perf test -v 'branch stack sampling'
112: Check branch stack sampling :
--- start ---
test child forked, pid 123741
Testing user branch stack sampling
+ grep -E -m1 ^brstack_bench\+[^ ]*/brstack_foo\+[^ ]*/IND_CALL/.*$ /tmp/__perf_test.program.5Dz1U/perf.script
+ cleanup
+ rm -rf /tmp/__perf_test.program.5Dz1U
test child finished with -1
---- end ----
Check branch stack sampling: FAILED!
After:
$ tools/perf/perf test -v 'branch stack sampling'
112: Check branch stack sampling :
--- start ---
test child forked, pid 125157
perf does not have symbol 'brstack_bench'
perf is missing symbols - skipping test
test child finished with -2
---- end ----
Check branch stack sampling: Skip
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231123075848.9652-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test "Check Arm64 callgraphs are complete in fp mode" depends on
finding symbol leafloop in perf, and fails if perf has been stripped and no
debug object is available. In that case, skip the test instead.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231123075848.9652-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf record test depends on finding symbol test_loop in perf, and fails if
perf has been stripped and no debug object is available. In that case, skip
the test instead.
Example:
Note, building with perl support adds option -Wl,-E which causes the
linker to add all (global) symbols to the dynamic symbol table. So the
test_loop symbol, being global, does not get stripped unless NO_LIBPERL=1
Before:
$ make NO_LIBPERL=1 -C tools/perf >/dev/null 2>&1
$ strip tools/perf/perf
$ tools/perf/perf buildid-cache -p `realpath tools/perf/perf`
$ tools/perf/perf test -v 'record tests'
91: perf record tests :
--- start ---
test child forked, pid 118750
Basic --per-thread mode test
Per-thread record [Failed missing output]
Register capture test
Register capture test [Success]
Basic --system-wide mode test
System-wide record [Skipped not supported]
Basic target workload test
Workload record [Failed missing output]
test child finished with -1
---- end ----
perf record tests: FAILED!
After:
$ tools/perf/perf test -v 'record tests'
91: perf record tests :
--- start ---
test child forked, pid 120025
perf does not have symbol 'test_loop'
perf is missing symbols - skipping test
test child finished with -2
---- end ----
perf record tests: Skip
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231123075848.9652-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf pipe recording and injection test depends on finding symbol noploop in
perf, and fails if perf has been stripped and no debug object is available.
In that case, skip the test instead.
Example:
Before:
$ strip tools/perf/perf
$ tools/perf/perf buildid-cache -p `realpath tools/perf/perf`
$ tools/perf/perf test -v pipe
86: perf pipe recording and injection test :
--- start ---
test child forked, pid 47734
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
47741 47741 -1 |perf
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
cannot find noploop function in pipe #1
test child finished with -1
---- end ----
perf pipe recording and injection test: FAILED!
After:
$ tools/perf/perf test -v pipe
86: perf pipe recording and injection test :
--- start ---
test child forked, pid 48996
perf does not have symbol 'noploop'
perf is missing symbols - skipping test
test child finished with -2
---- end ----
perf pipe recording and injection test: Skip
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231123075848.9652-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some shell tests depend on finding symbols for perf itself, and fail if
perf has been stripped and no debug object is available. Add helper
functions to check if perf has a needed symbol. This is preparation for
amending the tests themselves to be skipped if a needed symbol is not
found.
The functions make use of the "Symbols" test which reads and checks symbols
from a dso, perf itself by default. Note the "Symbols" test will find
symbols using the same method as other perf tests, including, for example,
looking in the buildid cache.
An alternative would be to prevent the needed symbols from being stripped,
which seems to work with gcc's externally_visible attribute, but that
attribute is not supported by clang.
Another alternative would be to use option -Wl,-E (which is already used
when perf is built with perl support) which causes the linker to add all
(global) symbols to the dynamic symbol table. Then the required symbols
need only be made global in scope to avoid being strippable. However that
goes beyond what is needed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231123075848.9652-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These variables are never referenced in the code, just remove them.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: zhujun2 <zhujun2@cmss.chinamobile.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231115064255.11057-1-zhujun2@cmss.chinamobile.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a basic test for the branch counter feature.
The test verifies that
- The new filter can be successfully applied on the supported platforms.
- The counter value can be outputted via the perf report -D
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tinghao Zhang <tinghao.zhang@intel.com>
Link: https://lore.kernel.org/r/20231107184020.1497571-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On s390 using linux-next the test case:
87: perf record offcpu profiling tests
fails. The root cause is this command
# ./perf record --off-cpu -e dummy -- ./perf bench sched messaging -l 10
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.231 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.077 MB perf.data (401 samples) ]
#
It does not generate 800+ sample entries, on s390 usually around
40[1-9], sometimes a few more, but never more than 450. The higher the
number of CPUs the lower the number of samples.
Looking at function chain:
bench_sched_messaging()
+--> group()
the senders and receiver threads are created. The senders and receivers
call function ready() which writes one bytes and wait for a reply using
poll system() call.
As context switches are counted, the function ready() will trigger a
context switch when no input data is available after the write system
call. The write system call does not trigger context switches when the
data size is small. And writing 1000 bytes (10 iterations with
100 bytes) is not much and certainly won't block.
The 400+ context switch on s390 occur when the some receiver/sender
threads call ready() and wait for the response from function
bench_sched_messaging() being kicked off.
Lower the number of expected context switches to 400 to succeed on s390.
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Co-developed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20231106091627.2022530-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are spelling mistakes in comments and a pr_debug message. Fix them.
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: https://lore.kernel.org/r/20231003074911.220216-1-colin.i.king@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are two reasons to do this, firstly there is a shellcheck warning
in cs_etm_dev_name(), which can be completely deleted. And secondly the
current iteration method doesn't support systems with both ETE and ETM
because it picks one or the other. There isn't a known system with this
configuration, but it could happen in the future.
Iterating over all the sources for each CPU can be done by going through
/sys/bus/event_source/devices/cs_etm/cpu* and following the symlink back
to the Coresight device in /sys/bus/coresight/devices. This will work
whether the device is ETE, ETM or any future name, and is much simpler
and doesn't require any hard coded version numbers
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: tianruidong@linux.alibaba.com
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Anushree Mathur <anushree.mathur@linux.vnet.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: atrajeev@linux.vnet.ibm.com
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231023131550.487760-1-james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
CoreSight might be not available, in such case, skip the tests.
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: vmolnaro@redhat.com
Link: https://lore.kernel.org/r/20231019091137.22525-1-mpetlan@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Running shellcheck on stat_all_metricgroups.sh reports
below warning:
In ./tests/shell/stat_all_metricgroups.sh line 7:
function ParanoidAndNotRoot()
^-- SC2112: 'function' keyword is non-standard. Delete it.
As per the format, "function" is a non-standard keyword that
can be used to declare functions. Fix this by removing the
"function" keyword from ParanoidAndNotRoot function
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20231013073021.99794-4-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Running shellcheck on record_sideband.sh throws below
warning:
In tests/shell/record_sideband.sh line 25:
if ! perf record -o ${perfdata} -BN --no-bpf-event -C $1 true 2>&1 >/dev/null
^--^ SC2069: To redirect stdout+stderr, 2>&1 must be last (or use '{ cmd > file; } 2>&1' to clarify).
This shows shellcheck warning SC2069 where the redirection
order needs to be fixed. Use "cmd > /dev/null 2>&1" to fix
the redirection of perf record output
Fixes: 23b97c7ee9 ("perf test: Add test case for record sideband events")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: disgoel@linux.vnet.ibm.com
Link: https://lore.kernel.org/r/20231013073021.99794-3-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Running shellcheck on lock_contention.sh generates below
warning
In tests/shell/lock_contention.sh line 36:
if [ `nproc` -lt 4 ]; then
^-----^ SC2046: Quote this to prevent word splitting.
Here since nproc will generate a single word output
and there is no possibility of word splitting, this
warning can be ignored. Use exception for this with
"disable" option in shellcheck. This warning is observed
after commit:
"commit 29441ab3a3 ("perf test lock_contention.sh: Skip test
if not enough CPUs")"
Fixes: 29441ab3a3 ("perf test lock_contention.sh: Skip test if not enough CPUs")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20231013073021.99794-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Switch the test program to sleep that makes more sense for system wide
events. Only enable system wide when root or not paranoid. This avoids
failures under some testing conditions like ARM cloud.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230930060206.2353141-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Running shellcheck on some of the shell scripts, throws
below warning on shellcheck v0.6. Example:
In tests/shell/coresight/asm_pure_loop.sh line 14:
DATA="$DATD/perf-$TEST-$DATV.data"
^---^ SC2153: Possible misspelling: DATD may not be assigned, but DATA is.
Here, DATD is exported from "lib/coresight.sh" and this
warning can be ignored. Use "shellcheck disable=" to ignore
this check.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230907171540.36736-4-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Running shellcheck on stat+shadow_stat.sh generates below
warning
In tests/shell/stat+csv_summary.sh line 26:
while read _num _event _run _pct
^--^ SC2034: _num appears unused. Verify use (or export if used externally).
^----^ SC2034: _event appears unused. Verify use (or export if used externally).
^--^ SC2034: _run appears unused. Verify use (or export if used externally).
^--^ SC2034: _pct appears unused. Verify use (or export if used externally).
This variable is intentionally unused since it is
needed to parse through the output. commit used "_"
as a prefix for this throw away variable. But this
stil shows warning with shellcheck v0.6. Fix this
by only using "_" instead of prefix and variable name.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230907171540.36736-3-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Running shellcheck on some of the shell scripts throws
below error:
In tests/shell/coresight/unroll_loop_thread_10.sh line 8:
. "$(dirname $0)"/../lib/coresight.sh
^-- SC1090: Can't follow non-constant source. Use a directive to specify location.
This happens on shellcheck version "0.6.0". Fix shellcheck
warning for SC1090 using "shellcheck source="i option to mention
the location of sourced files.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230907171540.36736-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Machines with less then 4 CPUs weren't consistently triggering lock
events required for the test.
Skip the test on those machines. The limit of 4 CPUs is set as it
generates around 100 lock events for a test.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Acked-by: Michael Petlan <mpetlan@redhat.com>
Link: https://lore.kernel.org/r/20230919150419.23193-2-vmolnaro@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The test was failing in specific scenarios due to imperfection of FP
arithmetics. The `bc` command wasn't correctly rounding the result of
division causing the failure.
Replace the `bc` with `awk` which should work with more decimal places
and add a threshold to catch any possible rounding errors. The
acceptable rounding error is set to 0.01 when the test passes with a
warning message.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Acked-by: Michael Petlan <mpetlan@redhat.com>
Link: https://lore.kernel.org/r/20230919150419.23193-1-vmolnaro@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Use perf version to detect whether BPF skeletons were enabled in a
build rather than a failing perf record.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Patrice Duroux <patrice.duroux@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: llvm@lists.linux.dev
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230914211948.814999-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add a new test case to record sideband events for all CPUs when tracing
selected CPUs
Test result:
# ./perf test list 2>&1 | grep 'perf record sideband tests'
95: perf record sideband tests
# ./perf test 95
95: perf record sideband tests : Ok
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20230904023340.12707-6-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It has system-wide test and cpu-list test but the cpu-list test fails
sometimes. It runs sleep command on CPU1 and measure both user.slice
and system.slice cgroups by default (on systemd-based systems).
But if the system was idle enough, sometime the system.slice gets no
count and it makes the test failing. Maybe that's because it only looks
at the CPU1, let's add CPU0 to increase the chance it finds some tasks.
Fixes: 7901086014 ("perf test: Add a new test for perf stat cgroup BPF counter")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230825164152.165610-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As of now, bpf counters (bperf) don't support event groups. But the
default perf stat includes topdown metrics if supported (on recent Intel
machines) which require groups. That makes perf stat exiting.
$ sudo perf stat --bpf-counter true
bpf managed perf events do not yet support groups.
Actually the test explicitly uses cycles event only, but it missed to
pass the option when it checks the availability of the command.
Fixes: 2c0cb9f560 ("perf test: Add a shell test for 'perf stat --bpf-counters' new option")
Reviewed-by: Song Liu <song@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230825164152.165610-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The BPF sample filtering requires two kernel changes below:
* bpf_cast_to_kernel_ctx() kfunc (added in v6.2)
* setting perf_sample_data->sample_flags (finished in v6.3)
The perf tools can check bpf_cast_to_kernel_ctx() easily so it can
refuse BPF filters on those old kernels (v6.1 and earlier).
But checking sample_flags appears to be difficult so current code won't
work on v6.2 kernel. That's unfortunate but I don't know what's the
correct way to handle it.
For now, let's skip v6.2 kernels explicitly (if failed) in the test.
Fixes: 9575ecdd19 ("perf test: Add perf record sample filtering test")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230825164152.165610-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
$ sudo ./perf test 'sample filter' -v
94: perf record sample filtering (by BPF) tests :
--- start ---
test child forked, pid 3817527
Checking BPF-filter privilege
Basic bpf-filter test
Basic bpf-filter test [Success]
Failing bpf-filter test
Error: task-clock event does not have PERF_SAMPLE_CPU
Failing bpf-filter test [Success]
Group bpf-filter test
Error: task-clock event does not have PERF_SAMPLE_CPU
Error: task-clock event does not have PERF_SAMPLE_CODE_PAGE_SIZE
Group bpf-filter test [Success]
test child finished with 0
---- end ----
perf record sample filtering (by BPF) tests: Ok
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230811025822.3859771-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With augmented_raw_syscalls transformed into a BPF skel made the output have a "
around the filenames, which is not what the old perf probe vfs_getname
method of obtaining filenames did, so accept the augmented way, with the
quotes.
At this point probably removing all the logic for the vfs_getname method
is in order, will do it at some point.
For now lets accept with/without quotes and make that test pass.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running on fedora:38 in verbose mode I noticed:
# perf test -v 117
grep: warning: stray \ before /
117: Check open filename arg using perf trace + vfs_getname :
Remove that \ before /.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZNvTDsSMO3nw9Tnp@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on stat_std_output testcase throws
below warning:
In tests/shell/stat+std_output.sh line 9:
. $(dirname $0)/lib/stat_output.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
In tests/shell/stat+std_output.sh line 32:
local -i cnt=0
^-^ SC2034 (warning): cnt appears unused. Verify use (or export if used externally).
Fixed the warning by adding quotes to avoid word splitting
and removed unused variable "cnt" at line 32.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-27-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on stat_output.sh throws below warning:
In tests/shell/lib/stat_output.sh line 1:
^-- SC2148 (error): Tips depend on target shell and yours is unknown. Add a shebang or a 'shell' directive.
Fixed the warning by adding shell directive.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-25-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck in "lib/waiting.sh" generates below
warning:
In ./tools/perf/tests/shell/lib/waiting.sh line 1:
# SPDX-License-Identifier: GPL-2.0
^-- SC2148 (error): Tips depend on target shell and yours is unknown. Add a shebang or a 'shell' directive.
Fix this by adding shebang in the beginning of the script.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-20-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on probe_vfs_getname fails with below
warning:
In ./tools/perf/tests/shell/lib/probe_vfs_getname.sh line 1:
# Arnaldo Carvalho de Melo <acme@kernel.org>, 2017
^-- SC2148 (error): Tips depend on target shell and yours is unknown. Add a shebang or a 'shell' directive.
In ./tools/perf/tests/shell/lib/probe_vfs_getname.sh line 14:
local verbose=$1
^-----------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
Fix this:
- by adding shebang in the beginning of the file and
- rename variable verbose to "add_probe_verbose" after removing
local
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-19-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix the shellcheck warnings for thread_loop_check_tid_10.sh
In ./tools/perf/tests/shell/coresight/thread_loop_check_tid_10.sh line 8:
. $(dirname $0)/../lib/coresight.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
Add quotes to prevent word splitting which are caused by
unquoted command expansions.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-17-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on probe.sh throws below warning:
In lib/probe.sh line 1:
^-- SC2148 (error): Tips depend on target shell and yours is unknown. Add a shebang or a 'shell' directive.
Fixed the warnings by adding shell directive.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-14-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on stat+shadow_stat.sh generates below warning:
In tests/shell/stat+shadow_stat.sh line 48:
while read cpu num evt hash ipc rest
^--^ SC2034 (warning): hash appears unused. Verify use (or export if used externally).
This variable is intentionally unused since it is needed to parse
through the output. Use "_" as a prefix for this throw away variable.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-11-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on stat_bpf_counter.sh generates below
warning:
In tests/shell/stat_bpf_counters.sh line 34:
if [ "$base_cycles" == "<not" ]; then
^-- SC3014 (warning): In POSIX sh, == in place of = is undefined.
In tests/shell/stat_bpf_counters.sh line 39:
if [ "$bpf_cycles" == "<not" ]; then
^-- SC3014 (warning): In POSIX sh, == in place of = is undefined.
Fix this by using "=" instead of "==" to work for
all shells.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-10-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on test_perf_data_converter_json.sh throws
below warning:
In tests/shell/test_perf_data_converter_json.sh line 42:
if [ $(cat "${result}" | wc -l) -gt "0" ] ; then
^------------------------^ SC2046 (warning): Quote this to prevent word splitting.
Fixed the warning by adding quotes to avoid word splitting.
ShellCheck result with patch:
# shellcheck -S warning test_perf_data_converter_json.sh
#
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-9-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on stat+csv_summary.sh throws below warnings:
In tests/shell/stat+csv_summary.sh line 26:
while read num event run pct
^-^ SC2034 (warning): num appears unused. Verify use (or export if used externally).
^---^ SC2034 (warning): event appears unused. Verify use (or export if used externally).
^-^ SC2034 (warning): run appears unused. Verify use (or export if used externally).
^-^ SC2034 (warning): pct appears unused. Verify use (or export if used externally).
These variables are intentionally unused since they are needed to parse
through the output. Use "_" as a prefix for these throw away variables.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-8-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck -S on test_arm_spe_fork.sh throws below warnings:
In tests/shell/test_arm_spe_fork.sh line 25:
trap cleanup_files exit term int
^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
^-^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
Fixed this issue by using uppercase for "EXIT", "TERM" and
"INIT" signals to avoid using lower/mixed case for signal
names as input.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-7-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on lock_contention.sh generates below warning:
In stat_bpf_counters_cgrp.sh line 28:
if [ -d /sys/fs/cgroup/system.slice -a -d /sys/fs/cgroup/user.slice ]; then
^-- SC2166 (warning): Prefer [ p ] && [ q ] as [ p -a q ] is not well defined.
In stat_bpf_counters_cgrp.sh line 34:
local self_cgrp=$(grep perf_event /proc/self/cgroup | cut -d: -f3)
^-------------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
^-------^ SC2155 (warning): Declare and assign separately to avoid masking return values.
^-- SC2046 (warning): Quote this to prevent word splitting.
In stat_bpf_counters_cgrp.sh line 51:
local output
^----------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
In stat_bpf_counters_cgrp.sh line 65:
local output
^----------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
Fixed above warnings by:
- Changing the expression [p -a q] to [p] && [q].
- Fixing shellcheck warnings for local usage, by prefixing
function name to the variable.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-6-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on lock_contention.sh generates below warning:
In tests/shell/lock_contention.sh line 24:
if [ `id -u` != 0 ]; then
^-----^ SC2046 (warning): Quote this to prevent word splitting.
In tests/shell/lock_contention.sh line 160:
local type=$(head -1 "${result}" | awk '{ print $8 }' | sed -e 's/:.*//')
^--------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
^--^ SC2155 (warning): Declare and assign separately to avoid masking return values.
^-- SC2046 (warning): Quote this to prevent word splitting.
Fixed above warnings by:
- Adding quotes to avoid word splitting.
- Fixing shellcheck warnings for local usage, by prefixing
function name to the variable.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-5-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on record_offcpu.sh throws below warning:
In tests/shell/record_offcpu.sh line 13:
trap - exit term int
^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
^-^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
In tests/shell/record_offcpu.sh line 20:
trap trap_cleanup exit term int
^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
^-^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
In tests/shell/record_offcpu.sh line 25:
if [ `id -u` != 0 ]
^-----^ SC2046 (warning): Quote this to prevent word splitting.
Fixed the warnings by:
- Capitalize signals(INT, TERM, EXIT) to avoid mixed/lower case naming of
signals.
- Adding quotes to avoid word splitting.
Result from shellcheck after patch changes:
$ shellcheck -S warning record_offcpu.sh
$
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-4-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on probe_vfs_getname.sh throws below warning:
In tests/shell/probe_vfs_getname.sh line 7:
. $(dirname $0)/lib/probe.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
In tests/shell/probe_vfs_getname.sh line 11:
. $(dirname $0)/lib/probe_vfs_getname.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
Fixed the warning by adding quotes to avoid word splitting.
ShellCheck result with patch:
# shellcheck -S warning probe_vfs_getname.sh
#
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-3-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck -S on probe_vfs_getname.sh, throws below warnings:
Before fix:
$ shellcheck -S warning trace+probe_vfs_getname.sh
In trace+probe_vfs_getname.sh line 13:
. $(dirname $0)/lib/probe.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
In trace+probe_vfs_getname.sh line 18:
. $(dirname $0)/lib/probe_vfs_getname.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
In trace+probe_vfs_getname.sh line 21:
evts=$(echo $(perf list syscalls:sys_enter_open* 2>/dev/null | grep -E 'open(at)? ' | sed -r 's/.*sys_enter_([a-z]+) +\[.*$/\1/') | sed 's/ /,/')
^-- SC2046 (warning): Quote this to prevent word splitting.
Fix the shellcheck warnings by adding quotes to prevent word splitting.
Signed-off-by: Akanksha J N <akanksha@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we depend on output of 'perf record -e "sched:sched_switch"', to
check whether perf was built with libtraceevent support.
Instead, a more straightforward approach can be to check the build options,
using 'perf version --build-options', to check for libtraceevent support.
When perf is compiled WITHOUT libtraceevent ('make NO_LIBTRACEEVENT=1'),
'perf version --build-options' outputs (output trimmed):
...
libtraceevent: [ OFF ] # HAVE_LIBTRACEEVENT
...
While, when perf is compiled WITH libtraceevent,
'perf version --build-options' outputs:
...
libtraceevent: [ on ] # HAVE_LIBTRACEEVENT
...
Committer notes:
Removed one grep in the pipleline by combining the two into just one
expression that covers the OFF + HAVE_LIBTRACEEVENT.
Suggested-by: Ian Rogers <irogers@google.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230725061649.34937-1-adityag@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Without gcc, the test will fail.
On cleanup, ignore probe removal errors. Otherwise, in case of an error
adding the probe, the temporary directory is not removed.
Fixes: 56cbeacf14 ("perf probe: Add test for regression introduced by switch to die_get_decl_file()")
Signed-off-by: Georg Müller <georgmueller@gmx.net>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Georg Müller <georgmueller@gmx.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230728151812.454806-2-georgmueller@gmx.net
Link: https://lore.kernel.org/r/CAP-5=fUP6UuLgRty3t2=fQsQi3k4hDMz415vWdp1x88QMvZ8ug@mail.gmail.com/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a test to validate that 'perf probe' works for binaries
where DWARF info is split into multiple CUs
Signed-off-by: Georg Müller <georgmueller@gmx.net>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: regressions@lists.linux.dev
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230628084551.1860532-5-georgmueller@gmx.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To verify CSV output, just check the number of separators (",") using
the tr and wc commands like this.
grep -v "^#" ${result} | tr -d -c | wc -c
Now it expects 6 columns (and 5 separators) in the output, but it may
be changed later so count the field in the header first and compare it
to the actual output lines.
$ cat ${result}
# output: contended, total wait, max wait, avg wait, type, caller
1, 28787, 28787, 28787, spinlock, raw_spin_rq_lock_nested+0x1b
The test looks like below now:
$ sudo ./perf test -v contention
86: kernel lock contention analysis test :
--- start ---
test child forked, pid 2705822
Testing perf lock record and perf lock contention
Testing perf lock contention --use-bpf
Testing perf lock record and perf lock contention at the same time
Testing perf lock contention --threads
Testing perf lock contention --lock-addr
Testing perf lock contention --type-filter (w/ spinlock)
Testing perf lock contention --lock-filter (w/ tasklist_lock)
Testing perf lock contention --callstack-filter (w/ unix_stream)
Testing perf lock contention --callstack-filter with task aggregation
Testing perf lock contention CSV output
test child finished with 0
---- end ----
kernel lock contention analysis test: Ok
Acked-by: Ian Rogers <irogers@google.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230628200141.2739587-5-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
This test checks if the output of perf stat to match event names and
metrics. So it wants the output lines to have both event name and
metric. Otherwise it should skip the line.
On AMD machines, the instruction event has two metrics and they are printed
in separate lines. It makes the line without event name like below:
# perf stat -a sleep 1
Performance counter stats for 'system wide':
64,383.34 msec cpu-clock # 64.048 CPUs utilized
14,526 context-switches # 225.617 /sec
112 cpu-migrations # 1.740 /sec
190 page-faults # 2.951 /sec
807,558,652 cycles # 0.013 GHz (83.30%)
69,809,799 stalled-cycles-frontend # 8.64% frontend cycles idle (83.30%)
196,983,266 stalled-cycles-backend # 24.39% backend cycles idle (83.30%)
424,876,008 instructions # 0.53 insn per cycle
(here) ---> # 0.46 stalled cycles per insn (83.30%)
97,788,321 branches # 1.519 M/sec (83.34%)
4,147,377 branch-misses # 4.24% of all branches (83.46%)
1.005241409 seconds time elapsed
Also modern Intel machines have TopDown metrics which also don't have
event names.
# perf stat -a sleep 1
Performance counter stats for 'system wide':
8,015.39 msec cpu-clock # 7.996 CPUs utilized
5,823 context-switches # 726.477 /sec
189 cpu-migrations # 23.580 /sec
139 page-faults # 17.342 /sec
435,139,308 cycles # 0.054 GHz
193,891,345 instructions # 0.45 insn per cycle
42,773,028 branches # 5.336 M/sec
2,298,113 branch-misses # 5.37% of all branches
TopdownL1 # 25.5 % tma_backend_bound
/--> # 7.9 % tma_bad_speculation
(here) --+ # 55.7 % tma_frontend_bound
\--> # 10.9 % tma_retiring
1.002395924 seconds time elapsed
There is a check to skip TopdownL1 and TopdownL2 specifically but it
does not cover every affected lines.
So there is another check to skip the line if it has nothing on the left
side of # sign. Well.. it seems ok but that's not enough too.
When aggregation mode (like --per-socket or --per-thread) is used, it
adds some prefix (e.g. CPU socket, task name and PID) in the output
line. So the test code ignores them to normalize result.
A problem can happen for per-thread mode when task name contains one or
more spaces. It'd only ignore the first part of the task name, and it
thinks there's something more in the line so it would not skip.
# perf stat -a --perf-thread sleep 1
...
perf-21276 # 70.2 % tma_backend_bound
perf-21276 # 3.9 % tma_bad_speculation
perf-21276 # 10.5 % tma_frontend_bound
perf-21276 # 15.3 % tma_retiring
^^^^^^^^^^
(ignored)
my task-21328 # 70.2 % tma_backend_bound
my task-21328 # 3.9 % tma_bad_speculation
my task-21328 # 10.5 % tma_frontend_bound
my task-21328 # 15.3 % tma_retiring
^^
(ignored)
So I think it should look at the metric names instead. Add skip_metric
to hold the list of names to skip. It would contain 'stalled cycles per
insn' and metrics started by 'tma_'.
Fixes: 99a04a48f2 ("perf test: Add test case for the standard 'perf stat' output")
Acked-by: Ian Rogers <irogers@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230623230139.985594-2-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
On AMD machines, the perf stat STD output test failed like below:
$ sudo ./perf test -v 98
98: perf stat STD output linter :
--- start ---
test child forked, pid 1841901
Checking STD output: no argswrong event metric.
expected 'GHz' in 108,121 stalled-cycles-frontend # 10.88% frontend cycles idle
test child finished with -1
---- end ----
perf stat STD output linter: FAILED!
This is because there are stalled-cycles-{frontend,backend} events are
used by default. The current logic checks the event_name array to find
which event it's running. But 'cycles' event comes before those stalled
cycles event and it matches first. So it tries to find 'GHz' metric
in the output (which is for the 'cycles') and fails.
Move the stalled-cycles-{frontend,backend} events before 'cycles' so
that it can find the stalled cycles events first.
Also add a space after 'no args' test name for consistency.
Fixes: 99a04a48f2 ("perf test: Add test case for the standard 'perf stat' output")
Acked-by: Ian Rogers <irogers@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230623230139.985594-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The task-analyzer.py script (actually every other scripts too) requires
PERF_EXEC_PATH env to find dependent libraries and scripts. For scripts
test to run correctly, it needs to set PERF_EXEC_PATH to the perf tool
source directory.
Instead of blindly update the env, let's check the directory structure
to make sure it points to the correct location.
Fixes: e8478b84d6 ("perf test: add new task-analyzer tests")
Cc: Petar Gligoric <petar.gligoric@rohde-schwarz.com>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
$TEST_PROGRAM is a command with spaces so it's supposed to be word
split. The referenced fix to fix the shellcheck warnings incorrectly
quoted this string so unquote it to fix the test.
At the same time silence the shellcheck warning for that line and fix
two more shellcheck errors at the end of the script.
Fixes: 1bb17b4c6c ("perf tests arm_callgraph_fp: Address shellcheck warnings about signal names and adding double quotes for expression")
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: spoorts2@in.ibm.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/r/20230622101809.2431897-1-james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The commit fc51fc87b1 factored out the helper functions to a library
but the new file had execute permission. Due to the way it detects
the shell test scripts, it showed up in the perf test list unexpectedly.
$ ./perf test list 2>&1 | grep 86
76: x86 bp modify
77: x86 Sample parsing
78: x86 hybrid
86: <---- (here)
$ ./perf test -v 86
86: :
--- start ---
test child forked, pid 1932207
test child finished with 0
---- end ----
: Ok
As it's a collection of library functions, it should not run as is.
Let's remove the execute permission.
Fixes: fc51fc87b1 ("perf test: Move all the check functions of stat CSV output to lib")
Acked-by: Ian Rogers <irogers@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230622055832.83476-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Rerun failed metrics with longer workload to avoid false failure because
sometimes metric value test fails when running in very short amount of
time. Skip rerun if equal to or more than 20 metrics fail.
Signed-off-by: Weilin Wang <weilin.wang@intel.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: ravi.bangoria@amd.com
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/r/20230620170027.1861012-4-weilin.wang@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add skip list for metrics known would fail because some of the metrics are
very likely to fail due to multiplexing or other errors. So add all of the
flaky tests into the skip list.
Signed-off-by: Weilin Wang <weilin.wang@intel.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: ravi.bangoria@amd.com
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/r/20230620170027.1861012-3-weilin.wang@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add metric value validation test to check if metric values are with in
correct value ranges. There are three types of tests included: 1)
positive-value test checks if all the metrics collected are non-negative;
2) single-value test checks if the list of metrics have values in given
value ranges; 3) relationship test checks if multiple metrics follow a
given relationship, e.g. memory_bandwidth_read + memory_bandwidth_write =
memory_bandwidth_total.
Signed-off-by: Weilin Wang <weilin.wang@intel.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: ravi.bangoria@amd.com
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/r/20230620170027.1861012-2-weilin.wang@intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
There exists the following warning when executing 'perf test record+probe_libc_inet_pton.sh':
fgrep: warning: fgrep is obsolescent; using grep -F
This is tested on Fedora 38, the version of grep is 3.8, the latest
version of grep claims the fgrep is obsolete, use "grep -F" instead of
"fgrep" to silence the warning.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: loongson-kernel@lists.loongnix.cn
Link: https://lore.kernel.org/r/1686880567-30017-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new test case to verify the standard 'perf stat' output with
different options.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahmad Yasin <ahmad.yasin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20230616031420.3751973-5-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These functions can be shared with the stat std output test.
There is no functional change.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahmad Yasin <ahmad.yasin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20230616031420.3751973-4-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There may be multiplexing triggered, e.g., e-core of ADL.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahmad Yasin <ahmad.yasin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20230615135315.3662428-7-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A new field metricgroup has been added in the perf stat JSON output.
Support it in the test case.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahmad Yasin <ahmad.yasin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20230607162700.3234712-8-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test "perf script task-analyzer tests" fails in environment with missing
libtraceevent support, as perf record fails to create the perf.data
file, which further tests depend on.
Instead, when perf is not compiled with libtraceevent support, skip
those tests instead of failing them, by checking the output of `perf
record --dry-run` to see if it prints the error "libtraceevent is
necessary for tracepoint support"
For the following output, perf compiled with: `make NO_LIBTRACEEVENT=1`
Before the patch:
108: perf script task-analyzer tests :
test child forked, pid 24105
failed to open perf.data: No such file or directory (try 'perf record' first)
FAIL: "invokation of perf script report task-analyzer command failed" Error message: ""
FAIL: "test_basic" Error message: "Failed to find required string:'Comm'."
failed to open perf.data: No such file or directory (try 'perf record' first)
FAIL: "invokation of perf script report task-analyzer --ns --rename-comms-by-tids 0:random command failed" Error message: ""
FAIL: "test_ns_rename" Error message: "Failed to find required string:'Comm'."
failed to open perf.data: No such file or directory (try 'perf record' first)
<...>
perf script task-analyzer tests: FAILED!
With this patch, the script instead returns 2 signifying SKIP, and after
the patch:
108: perf script task-analyzer tests :
test child forked, pid 26010
libtraceevent is necessary for tracepoint support
WARN: Skipping tests. No libtraceevent support
test child finished with -2
perf script task-analyzer tests: Skip
Fixes: e8478b84d6 ("perf test: Add new task-analyzer tests")
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Petar Gligoric <petar.gligoric@rohde-schwarz.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230613164145.50488-18-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
${$1} gives bad substitution error on sh, bash, and zsh. This seems like
a typo, and this patch modifies it to $1, since that is what it's usage
looks like from wherever `check_exec_0` is called.
This issue due to ${$1} caused all function calls to give error in
`find_str_or_fail` line, and so no test runs completely. But
'perf test "perf script task-analyzer tests"' wrongly reports
that tests passed with the status OK, which is wrong considering
the tests didn't even run completely
Fixes: e8478b84d6 ("perf test: add new task-analyzer tests")
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Petar Gligoric <petar.gligoric@rohde-schwarz.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230613164145.50488-16-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck -S on stat+shadow_stat.sh testcase, generates
SC2046 and SC2034 warnings,
$ shellcheck -S warning tests/shell/stat+shadow_stat.sh
res=`printf "%.2f" $(echo "scale=6; $num / $cyc" | bc -q)`
: Quote this to prevent word splitting
To address the POSIX shell warnings used quotes in the printf
expressions, to prevent word splitting.
Signed-off-by: Spoorthy S <spoorts2@in.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230613164145.50488-15-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix all the POSIX sh warnings in perf shell test test_brstack.sh
Warnings fixed :
* In POSIX sh, using lower/mixed case for signal names is undefined.
Correcting that in this script.
* In POSIX sh, 'local' is undefined.
local is supported in many shells, but it's not in POSIX.
In POSIX sh, you can adopt some convention to avoid accidentally
overwriting variables names, e.g. prefixing with the function name,
that is what I have done here.
Signed-off-by: Geetika <geetika@linux.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230613164145.50488-14-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixed the shellcheck warnings in buildid.sh, record+probe_libc_inet_pton.sh
and record+script_probe_vfs_getname.sh perf shell scripts:
1. Prefer [ p ] && [ q ] as [ p -a q ] is not well defined.
2. Prefer [ p ] || [ q ] as [ p -o q ] is not well defined.
3. Used * argument to avoid the argument mixes string and array
4. Resolved issue for variable refernce, where the variable is
being used before it has been initialized.
5. Resolved word splitting issue (syntax error).
6. The "err" variable has been removed from buildid.sh since
it is not used anywhere in the code.
Signed-off-by: Samir Mulani <samir@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230613164145.50488-13-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use quotes around variables to prevent POSIX word expansion, use
uppercase for signals(INT, TERM, EXIT) to avoid mixed/lower case naming
of signals and replace "==" with "=" as "==" is not supported by POSIX
shell.
Signed-off-by: Abhirup Deb <abhirupdeb@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230613164145.50488-12-atrajeev@linux.vnet.ibm.com
Signed-off-by: Anushree Mathur <anushree.mathur2@ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck -S on test_arm_spe.sh throws below warnings:
#shellcheck -S warning tests/shell/test_arm_spe.sh
In tests/shell/test_arm_spe.sh line 30:
trap cleanup_files exit term int
^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
^-^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
Fixed this issue by using uppercase for "EXIT", "TERM" and
"INIT" signals to avoid using lower/mixed case for signal
names as input.
Signed-off-by: Abhirup Deb <abhirupdeb@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230613164145.50488-11-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Mukesh Chaurasiya <mukesh.chaurasiya@ibm.com>
Signed-off-by: Ojaswin Mujoo <ojaswin.mujoo@ibm.com>
Signed-off-by: Piyush Sachdeva <Piyush.Sachdeva@ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixed the following shellcheck issues in test_task_analyzer.sh file:
SC2086: Double quote to prevent globbing and word splitting
warnings in shell-check.
Fixes the following shellcheck issues,
SC2086: Double quote to prevent globbing and word splitting
warnings in shell-check.
Before Patch:
$ shellcheck ./test_task_analyzer.sh | grep "SC2086" | ...
In ./test_task_analyzer.sh line 13:
SC2086: Double quote to prevent globbing and word splitting.
In ./test_task_analyzer.sh line 24:
SC2086: Double quote to prevent globbing and word splitting.
In ./test_task_analyzer.sh line 39:
SC2086: Double quote to prevent globbing and word splitting.
After Patch:
$ shellcheck ./test_task_analyzer.sh | grep -i "SC2086"
None
perf test result after patch:
PASS: "test_basic"
PASS: "test_ns_rename"
PASS: "test_ms_filtertasks_highlight"
PASS: "test_extended_times_timelimit_limittasks"
PASS: "test_summary"
PASS: "test_summaryextended"
PASS: "test_summaryonly"
PASS: "test_extended_times_summary_ns"
PASS: "test_extended_times_summary_ns"
PASS: "test_csv"
PASS: "test_csvsummary"
PASS: "test_csv_extended_times"
PASS: "test_csvsummary_extended"
Signed-off-by: Aboorva Devarajan <aboorvad@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230613164145.50488-10-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixed shellcheck warning SC2076 in stat_all_metrics.sh.
Before the patch:
shell$ shellcheck stat_all_metrics.sh
In stat_all_metrics.sh line 9:
if [[ "$result" =~ "${m:0:50}" ]] || [[ "$result" =~ "<not supported>" ]]
^---------^ SC2076: Don't quote right-hand
side of =~, it'll match literally rather than as a regex.
In stat_all_metrics.sh line 15:
if [[ "$result" =~ "${m:0:50}" ]]
^---------^ SC2076: Don't quote right-hand
side of =~, it'll match literally rather than as a regex.
In stat_all_metrics.sh line 22:
if [[ "$result" =~ "${m:0:50}" ]]
^---------^ SC2076: Don't quote right-hand
side of =~, it'll match literally rather than as a regex.
After the patch:
shell$ shellcheck stat_all_metrics.sh
shell$
Signed-off-by: Barnali Guha Thakurata <barnali@linux.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230613164145.50488-9-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixed the following shellcheck issues in test_arm_coresight.sh file:
In tools/perf/tests/shell/test_arm_coresight.sh line 31:
trap - exit term int
^--^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined.
^--^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined.
^-^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined.
In tools/perf/tests/shell/test_arm_coresight.sh line 35:
trap cleanup_files exit term int
^--^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined.
^--^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined.
^-^ SC2039: In POSIX sh, using lower/mixed case for signal names is undefined.
In tools/perf/tests/shell/test_arm_coresight.sh line 92:
if [ $? -eq 0 -a -e "$1/enable_sink" ]; then
^-- SC2166: Prefer [ p ] && [ q ] as [ p -a q ] is not well defined.
Fixed above warnings by:
1)Capitalize signals(INT, TERM, EXIT) to avoid mixed/lower case naming of
signals.
2)Expression [p -a q] was not defined,changed it to [p] && [q] to avoid the
ambiguity as this is older format using -a or -o ,now we use [p] && [q] in
place of [p -a q] and [p] || [q] in place of [p -o q].
Result after fixing the issues:
shell$ shellcheck -S warning test_arm_coresight.sh
shell$
Signed-off-by: Anushree Mathur <anushree.mathur@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230613164145.50488-8-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running the shellcheck on stat+csv_output resulted in the following
warning.
Result with shellcheck without patch:
=====
$ shellcheck -S warning stat+csv_output.sh
In stat+csv_output.sh line 23:
[ $(uname -m) = "s390x" ] && exp='^[6-7]$'
^---------^ SC2046: Quote this to prevent word splitting.
In stat+csv_output.sh line 51:
[ $(id -u) != 0 ] && [ $(cat /proc/sys/kernel/perf_event_paranoid) -gt $1 ]
^------^ SC2046: Quote this to prevent word splitting.
^-- SC2046: Quote this to prevent word splitting.
=====
Fixed the warning SC2046 by adding quotes to prevent word splitting.
Result with shellcheck with patch:
=====
$ shellcheck -S warning tests/shell/stat+csv_output.sh
$ ./perf test "stat CSV output linter"
96: perf stat CSV output linter : Ok
=====
Signed-off-by: Korrapati Likhitha <likhitha@linux.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230613164145.50488-6-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck -S on daemon.sh throws below warnings:
Result from shellcheck:
# shellcheck -S warning daemon.sh
local line_name=`echo "${line}" | awk 'BEGIN { FS = ":" } ; { print $2 }'`
^-------^ SC2155: Declare and assign separately to avoid masking return values.
trap "echo 'FAILED: Signal caught'; daemon_exit ${config}; exit 1" SIGINT SIGTERM
^-------^ SC2064: Use single quotes, otherwise this expands now rather than when signalled.
count=`ls ${base}/session-test/ | grep perf.data | wc -l`
^-- SC2010: Don't use ls | grep. Use a glob or a for loop with a condition to allow non-alphanumeric filenames.
if [ ${size} != "OK" -o ${type} != "OK" ]; then
^-- SC2166: Prefer [ p ] || [ q ] as [ p -o q ] is not well defined.
Fixed above warnings by:
- declaring and assigning local variables separately
- To fix SC2010, instead of using "ls | grep", used glob to allow non-alphanumeric filenames
- Used single quotes to prevent expanding.
Result from shellcheck after patch changes:
$ shellcheck -S warning daemon.sh
$ echo $?
0
Signed-off-by: Shirisha G <shirisha@linux.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230613164145.50488-5-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck -S on test_arm_calligraph_fp throws warnings SC2086 and SC3049,
$shellcheck -S warning tests/shell/test_arm_callgraph_fp.sh
rm -f $PERF_DATA
: Double quote to prevent globbing and word splitting.
trap cleanup_files exit term int
: In POSIX sh, using lower/mixed case for signal names is undefined.
After fixing the warnings,
$shellcheck tests/shell/test_arm_callgraph_fp.sh
$ echo $?
0
To address the POSIX shell warnings added changes to convert Lowercase
signal names to uppercase in the script and double quoted the
command substitutions($fix to "$fix") to solve Globbing warnings.
Signed-off-by: Spoorthy S<spoorts2@in.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230613164145.50488-4-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on stat+json_output testcase, generates below warning:
[ $(id -u) != 0 ] && [ $(cat /proc/sys/kernel/perf_event_paranoid) -gt $1 ]
^------^ SC2046 (warning): Quote this to prevent word splitting.
^-- SC2046 (warning): Quote this to prevent word splitting.
Fixed the warning by adding quotes to avoid word splitting.
ShellCheck result with patch:
# shellcheck -S warning stat+json_output.sh
#
perf test result after the change:
94: perf stat JSON output linter : Ok
Signed-off-by: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/linux-perf-users/20230613164145.50488-3-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The recent --per-cache option test caused a problem. According to the
option name, I think it should check args.per_cache instead of
args.per_cache_instance.
$ sudo ./perf test -v 99
99: perf stat JSON output linter :
--- start ---
test child forked, pid 3086101
Checking json output: no args [Success]
Checking json output: system wide [Success]
Checking json output: interval [Success]
Checking json output: event [Success]
Checking json output: per thread [Success]
Checking json output: per node [Success]
Checking json output: system wide no aggregation [Success]
Checking json output: per core [Success]
Checking json output: per cache_instance Test failed for input:
...
Traceback (most recent call last):
File "linux/tools/perf/tests/shell/lib/perf_json_output_lint.py", line 88, in <module>
elif args.per_core or args.per_socket or args.per_node or args.per_die or args.per_cache_instance:
AttributeError: 'Namespace' object has no attribute 'per_cache_instance'
test child finished with -1
---- end ----
perf stat JSON output linter: FAILED!
Fixes: bfce728db3 ("pert tests: Add tests for new "perf stat --per-cache" aggregation option")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230524210600.3095830-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add tests for the new "--per-cache" option in 'perf stat' for CSV and
JSON generation as well as for the JSON linting.
Suggested-by: Gautham Shenoy <gautham.shenoy@amd.com>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wen Pu <puwen@hygon.cn>
Link: https://lore.kernel.org/r/20230517172745.5833-6-kprateek.nayak@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This commit adds support for testing the JSON output generated by the
'perf data' command's conversion to JSON functionality.
The test script now includes a step to ensure that the resulting JSON
file contains valid data.
Changes:
V1 -> V2:
Added a check for the existence of the result output file.
Replaced the usage of jq with json.load for validating the JSON format.
Checks using ShellCheck and checkpatch, addressing and resolving warnings.
Removed the unnecessary root permission check.
Modified the 'perf record' command to avoid requiring root permissions.
Committer testing:
$ perf test to-json
115: 'perf data convert --to-json' command test : Ok
$ perf test -v to-json
Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
115: 'perf data convert --to-json' command test :
--- start ---
test child forked, pid 1746867
Testing Perf Data Convertion Command to JSON
Perf Data Converter Command to JSON [SUCCESS]
Validating Perf Data Converted JSON file
The file contains valid JSON format [SUCCESS]
test child finished with 0
---- end ----
'perf data convert --to-json' command test: Ok
$
Signed-off-by: Anup Sharma <anupnewsmail@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/ZGcoJBAGlknjsA/n@yoga
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Anup Sharma <anupnewsmail@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
[ Fixup indentation to use consistently tabs, not a mixture of spaces and tabs, have 'if ... ; then' on the same line ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check a bogus PMU fails and that a known PMU succeeds. Limit to PMUs
known cpu, cpu_atom and armv8_pmuv3_0 ones.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahmad Yasin <ahmad.yasin@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20230513063447.464691-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When using the global aggregation mode, running perf script after perf
stat record can result in a segmentation fault as seen with commit
8b76a3188b ("perf stat: Remove unused perf_counts.aggr field").
Add a basic test to the existing suite of stat-related tests for
checking if that workflow runs without erroring out.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/6a5429879764e3dac984cbb11ee2d95cc1604161.1683280603.git.sandipan.das@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
br_misp_retired.all_branches is supported on processors that support
Intel PT, so use it to test sample mode with an event that has been
given a PMU name.
Please note, the test fails prior to the fix "perf parse-events: Do not
break up AUX event group".
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230508093952.27482-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test case 'Test java symbol' might run for a long time. On Fedora 38 the
run time is very, very long:
Output before:
# time ./perf test 108
108: Test java symbol : Ok
real 22m15.775s
user 3m42.584s
sys 4m30.685s
#
The reason is a lookup for the server for debug symbols as shown in:
# cat /etc/debuginfod/elfutils.urls
https://debuginfod.fedoraproject.org/
#
This lookup is done for every symbol/sample, so about 3500 lookups
will take place.
To omit this lookup, which is not needed, unset environment variable
DEBUGINFOD_URLS=''.
Output after:
# time ./perf test 108
108: Test java symbol : Ok
real 0m6.242s
user 0m4.982s
sys 0m3.243s
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20230509131847.835974-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This reverts commit a980755beb.
We need to better polish building with BPF skels, so revert back to
making it an experimental feature that has to be explicitely enabled
using BUILD_BPF_SKEL=1.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test case probe libc's inet_pton & backtrace it with ping fails with
Fedora 38 on x86_64.
Function getaddrinfo() does not show up in the call chain anymore:
# ./perf script
ping 1803 [000] 728.567146: probe_libc:inet_pton: (7f5275afc840)
133840 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
27b4a __libc_start_call_main+0x7a (/usr/lib64/libc.so.6)
27c0b __libc_start_main@@GLIBC_2.34+0x8b (/usr/lib64/libc.so.6)
ping 1803 [000] 728.567184: probe_libc:inet_pton: (7f5275afc840)
133840 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
493e main+0xcde (/usr/bin/ping)
27b4a __libc_start_call_main+0x7a (/usr/lib64/libc.so.6)
#
which causes the test case to fail. Remove function getaddrinfo()
from list of expected functions.
Output before:
# ./perf test 'libc'
91: probe libc's inet_pton & backtrace it with ping : FAILED!
#
Output after:
# ./perf test 'libc'
91: probe libc's inet_pton & backtrace it with ping : Ok
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20230503081255.3372986-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With Fedora 38 the perf test 86 probe libc's inet_pton fails on s390.
The call chain of the ping command changed. The functions
text_to_binary_address() and gaih_inet() do not show up in the call
chain anymore.
Output before:
# ./perf test -v 86
86: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 541050
fgrep: warning: fgrep is obsolescent; using grep -F
fgrep: warning: fgrep is obsolescent; using grep -F
BFD: DWARF error: could not find variable specification at offset 0x22011
...
ping 541078 [002] 348826.679581: probe_libc:inet_pton_1: (3ffad84b940)
14b940 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
10e9c3 __GI_getaddrinfo+0xeb3 (inlined)
4397 main+0x737 (/usr/bin/ping)
FAIL: expected backtrace entry "gaih_inet.*\+0x[[:xdigit:]]\
+[[:space:]]\(/usr/lib64/libc.so.6|inlined\)$"
got "4397 main+0x737 (/usr/bin/ping)"
test child finished with -1
---- end ----
probe libc's inet_pton & backtrace it with ping: FAILED!
#
Output after:
# ./perf test -v 86
86: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 541098
fgrep: warning: fgrep is obsolescent; using grep -F
fgrep: warning: fgrep is obsolescent; using grep -F
BFD: DWARF error: could not find variable specification at offset 0x309d1
...
ping 541126 [006] 349309.099067: probe_libc:inet_pton_1: (3ffb7f4b940)
14b940 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
10e9c3 __GI_getaddrinfo+0xeb3 (inlined)
4397 main+0x737 (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20230503081134.3372415-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Timeless and per-thread are orthogonal concepts that are currently
treated as if they are the same (per-thread == timeless). This breaks
when you modify the command line or itrace options to something that the
current logic doesn't expect.
For example:
# Force timeless with Z
--itrace=Zi10i
# Or inconsistent record options
-e cs_etm/timestamp=1/ --per-thread
Adding Z for decoding in per-cpu mode is particularly bad because in
per-thread mode trace channel IDs are discarded and all assumed to be 0,
which would mix trace from different CPUs in per-cpu mode.
Although the results might not be perfect in all scenarios, if the user
requests no timestamps, it should still be possible to decode in either
mode. Especially if the relative times of samples in different processes
aren't interesting, quite a bit of space can be saved by turning off
timestamps in per-cpu mode.
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Denis Nikitin <denik@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230424134748.228137-8-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Write the JSON output to a file, then sanity check this output. This
avoids problems with debug/warning/error output corrupting the file
format.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20230408054456.3001367-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Write the CSV output to a file, then sanity check this output. This
avoids problems with debug/warning/error output corrupting the file
format.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20230408054456.3001367-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's not 2&>1, the correct is 2>&1
Fixes: ade1d0307b ("perf offcpu: Update offcpu test for child process")
Signed-off-by: Patrice Duroux <patrice.duroux@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230303193058.21274-1-patrice.duroux@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
BPF skeleton support is now key to a number of perf features. Rather
than making it so that BPF support must be enabled for the build, make
this the default and error if the build lacks a clang and libbpf that
are sufficient. To avoid the error and build without BPF skeletons the
NO_BPF_SKEL=1 flag can be used. Add a build-options flag to 'perf
version' to enable detection of the BPF skeleton support and use this
in the offcpu shell test.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andres Freund <andres@anarazel.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Pavithra Gurushankar <gpavithrasha@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230311065753.3012826-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commas may appear in events like:
cpu/INT_MISC.RECOVERY_CYCLES,cmask=1,edge/
which causes the count of commas to see more items than expected. Switch
to counting the entries in the dictionary, which is 1 more than the
number of commas.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Claire Jensen <cjense@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20230223071818.329671-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commas may appear in events like:
cpu/INT_MISC.RECOVERY_CYCLES,cmask=1,edge/
which causes the commachecker to see more fields than expected. Use @ as
the CSV separator to avoid this.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Claire Jensen <cjense@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20230223071818.329671-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Testcase stat_all_metrics.sh fails in powerpc:
98: perf all metrics test : FAILED!
Logs with verbose:
[command]# ./perf test 98 -vv
98: perf all metrics test :
--- start ---
test child forked, pid 13262
Testing BRU_STALL_CPI
Testing COMPLETION_STALL_CPI
----
Testing TOTAL_LOCAL_NODE_PUMPS_P23
Metric 'TOTAL_LOCAL_NODE_PUMPS_P23' not printed in:
Error:
Invalid event (hv_24x7/PM_PB_LNS_PUMP23,chip=3/) in per-thread mode, enable system wide with '-a'.
Testing TOTAL_LOCAL_NODE_PUMPS_RETRIES_P01
Metric 'TOTAL_LOCAL_NODE_PUMPS_RETRIES_P01' not printed in:
Error:
Invalid event (hv_24x7/PM_PB_RTY_LNS_PUMP01,chip=3/) in per-thread mode, enable system wide with '-a'.
----
Based on above logs, we could see some of the hv-24x7 metric events
fails, and logs suggest to run the metric event with -a option. This
change happened after the commit a4b8cfcabb ("perf stat: Delay
metric parsing"), which delayed the metric parsing phase and now before
metric parsing phase perf tool identifies, whether target is system-wide
or not. With this change, perf_event_open will fails with workload
monitoring for uncore events as expected.
The perf all metric test case fails as some of the hv-24x7 metric events
may need bigger workload with system wide monitoring to get the data.
Fix this issue by changing current system wide check from true workload
to sleep 0.01 workload.
Result with the patch changes in powerpc:
98: perf all metrics test : Ok
Fixes: a4b8cfcabb ("perf stat: Delay metric parsing")
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230215093827.124921-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As detailed in https://www.shellcheck.net/wiki/SC2006:
The use of `...` is legacy syntax with several issues:
1. It has a series of undefined behaviors related to quoting in POSIX.
2. It imposes a custom escaping mode with surprising results.
3. It's exceptionally hard to nest.
$(...) command substitution has none of these problems,
and is therefore strongly encouraged.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Acked-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230201214945.127474-3-didi.debian@cknow.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To count the number of results from grep, use the '-c' parameter
instead of piping it to 'wc'.
See also https://www.shellcheck.net/wiki/SC2126
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Acked-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230201214945.127474-2-didi.debian@cknow.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test “Use vfs_getname probe to get syscall args filenames” fails in
environment with missing libtraceevent support as below:
82: Use vfs_getname probe to get syscall args filenames :
--- start ---
test child forked, pid 304726
Recording open file:
event syntax error: 'probe:vfs_getname*'
\___ unsupported tracepoint
libtraceevent is necessary for tracepoint support
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
test child finished with -1
---- end ----
Use vfs_getname probe to get syscall args filenames: FAILED!
The environment has debuginfo but is missing the libtraceevent devel.
Hence perf is compiled without libtraceevent support. The test tries to
add probe “probe:vfs_getname” and then uses it with “perf record”. This
fails at function “parse_events_add_tracepoint" due to missing
libtraceevent.
Similarly "probe libc's inet_pton & backtrace it with ping" test slso
fails with same reason.
Add a function in 'perf test shell' library to check if perf record with
—dry-run reports any error on missing support for libtraceevent. Update
both the tests to use this new function “skip_no_probe_record_support”
before proceeding With using probe point via perf builtin record.
With the change,
82: Use vfs_getname probe to get syscall args filenames :
--- start ---
test child forked, pid 305014
Recording open file:
libtraceevent is necessary for tracepoint support
test child finished with -2
---- end ----
Use vfs_getname probe to get syscall args filenames: Skip
81: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 305036
libtraceevent is necessary for tracepoint support
test child finished with -2
---- end ----
probe libc's inet_pton & backtrace it with ping: Skip
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: kjain@linux.ibm.com,
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/r/20230201180421.59640-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "probe libc's inet_pton & backtrace it with ping" test installs a
uprobe and uses perf record/script to check the backtrace. Currently
even if the "perf record" fails, the test reports success. Logs below:
# ./perf test -v "probe libc's inet_pton & backtrace it with ping"
81: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 304211
failed to open /tmp/perf.data.Btf: No such file or directory
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
Fix this by adding check for presence of perf.data file
before proceeding with "perf script".
With the patch changes, test reports fail correctly.
# ./perf test -v "probe libc's inet_pton & backtrace it with ping"
81: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 304358
FAIL: perf record failed to create "/tmp/perf.data.Uoi"
test child finished with -1
---- end ----
probe libc's inet_pton & backtrace it with ping: FAILED!
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/r/20230201180421.59640-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test_pipe() function will check perf report and perf inject with
pipe input.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20230131023350.1903992-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test named “build id cache operations” skips with below error
on some distros:
<<>>
78: build id cache operations :
test child forked, pid 111101
WARNING: wine not found. PE binaries will not be run.
test binaries: /tmp/perf.ex.SHA1.PKz /tmp/perf.ex.MD5.Gt3 ./tests/shell/../pe-file.exe
DEBUGINFOD_URLS=
Adding 4abd406f041feb4f10ecde3fc30fd0639e1a91cb /tmp/perf.ex.SHA1.PKz: Ok
build id: 4abd406f041feb4f10ecde3fc30fd0639e1a91cb
./tests/shell/buildid.sh: 69: ./tests/shell/buildid.sh: Bad substitution
test child finished with -2
build id cache operations: Skip
<<>>
The test script "tests/shell/buildid.sh" uses some of the string
substitution ways which are supported in bash, but not in "sh" or other
shells. Above error on line number 69 that reports "Bad substitution"
is:
<<>>
link=${build_id_dir}/.build-id/${id:0:2}/${id:2}
<<>>
Here the way of getting first two characters from id ie, ${id:0:2} and
similarly expressions like ${id:2} is not recognised in "sh". So the
line errors and instead of hitting failure, the test gets skipped as
shown in logs. So the syntax issue causes test not to be executed in
such cases. Similarly usage : "${@: -1}" [ to pick last argument passed
to a function] in “test_record” doesn’t work in all distros.
Fix this by using alternative way with shell substitution to pick
required characters from the string. Also fix the usage of “${@: -1}” to
work in all cases.
Another usage in “test_record” is:
<<>>
${perf} record --buildid-all -o ${data} $@ &> ${log}
<<>>
This causes the 'perf record' to start in background and Results in the
data file not being created by the time "check" function is invoked.
Below log shows 'perf record' result getting displayed after the call to
"check" function.
<<>>
running: perf record /tmp/perf.ex.SHA1.EAU
build id: 4abd406f041feb4f10ecde3fc30fd0639e1a91cb
link: /tmp/perf.debug.mLT/.build-id/4a/bd406f041feb4f10ecde3fc30fd0639e1a91cb
failed: link /tmp/perf.debug.mLT/.build-id/4a/bd406f041feb4f10ecde3fc30fd0639e1a91cb does not exist
test child finished with -1
build id cache operations: FAILED!
root@machine:~/athira/linux/tools/perf# Couldn't synthesize bpf events.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.010 MB /tmp/perf.data.bFF ]
<<>>
Fix this by redirecting output instead of using “&” which starts the
command in background.
Reviewed-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230119142719.32628-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf test "build id cache operations" fails for PE executable. Logs
below from powerpc system. Same is observed on x86 as well.
<<>>
Adding 5a0fd882b53084224ba47b624c55a469 ./tests/shell/../pe-file.exe: Ok
build id: 5a0fd882b53084224ba47b624c55a469
link: /tmp/perf.debug.w0V/.build-id/5a/0fd882b53084224ba47b624c55a469
file: /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf
failed: file /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf does not exist
test child finished with -1
---- end ----
build id cache operations: FAILED!
<<>>
The test tries to do:
<<>>
mkdir /tmp/perf.debug.TeY1
perf --buildid-dir /tmp/perf.debug.TeY1 buildid-cache -v -a ./tests/shell/../pe-file.exe
<<>>
The option "--buildid-dir" sets the build id cache directory as
/tmp/perf.debug.TeY1. The option given to buildid-cahe, ie "-a
./tests/shell/../pe-file.exe", is to add the pe-file.exe to the cache.
The testcase, sets buildid-dir and adds the file: pe-file.exe to build
id cache. To check if the command is run successfully, "check" function
looks for presence of the file in buildid cache directory. But the check
here expects the added file to be executable. Snippet below:
<<>>
if [ ! -x $file ]; then
echo "failed: file ${file} does not exist"
exit 1
fi
<<>>
The buildid test is done for sha1 binary, md5 binary and also for PE
file. The first two binaries are created at runtime by compiling with
"--build-id" option and hence the check for sha1/md5 test should use [ !
-x ]. But in case of PE file, the permission for this input file is
rw-r--r-- Hence the file added to build id cache has same permissoin
Original file:
ls tests/pe-file.exe | xargs stat --printf "%n %A \n"
tests/pe-file.exe -rw-r--r--
buildid cache file:
ls /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf | xargs stat --printf "%n %A \n"
/tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf -rw-r--r--
Fix the test to match with the permission of original file in case of FE
file. ie if the "tests/pe-file.exe" file is not having exec permission,
just check for existence of the buildid file using [ ! -e <file> ]
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230116050131.17221-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf test '84: probe libc's inet_pton & backtrace it with ping' fails on
s390. Debugging revealed a changed stack trace for the ping command
using probes:
ping 35729 [002] 8006.365063: probe_libc:inet_pton: (3ff9603e7c0)
13e7c0 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
---> 104371 text_to_binary_address+0xef1 (inlined)
104371 gaih_inet+0xef1 (inlined)
104371 __GI_getaddrinfo+0xef1 (inlined)
5d4b main+0x139b (/usr/bin/ping)
The line "---> text_to_binary_address ..." is new. It was introduced
with glibc version 2.36.7.2 released with Fedora 37 for s390.
Output before
# perf test inet_pton
84: probe libc's inet_pton & backtrace it with ping : FAILED!
#
Output after:
# perf test inet_pton
84: probe libc's inet_pton & backtrace it with ping : Ok
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20221228145704.2702487-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Starting with glibc 2.35 there are extra inet_pton() calls when doing a
IPv6 ping as in one of the 'perf test' entry, which makes it fail:
# perf test inet_pton
89: probe libc's inet_pton & backtrace it with ping : FAILED!
#
If we look at what this script is expecting (commenting out the removal
of the temporary files in it):
# cat /tmp/expected.aT6
ping[][0-9 \.:]+probe_libc:inet_pton: \([[:xdigit:]]+\)
.*inet_pton\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/libc.so.6|inlined\)$
getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/libc.so.6\)$
.*(\+0x[[:xdigit:]]+|\[unknown\])[[:space:]]\(.*/bin/ping.*\)$
#
And looking at what we are getting out of 'perf script', to match with
the above:
# cat /tmp/perf.script.IUC
ping 623883 [006] 265438.471610: probe_libc:inet_pton: (7f32bcf314c0)
1314c0 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
29510 __libc_start_call_main+0x80 (/usr/lib64/libc.so.6)
ping 623883 [006] 265438.471664: probe_libc:inet_pton: (7f32bcf314c0)
1314c0 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
fa6c6 getaddrinfo+0x126 (/usr/lib64/libc.so.6)
491e [unknown] (/usr/bin/ping)
#
We see that its just the first call to inet_pton() that didn't came thru
getaddrinfo(), so if we ignore the first the script matches what it
expects, testing that using 'perf probe' + 'perf record' + 'perf script'
with callchains on userspace targets is producing the expected results.
Since we don't have a 'perf script --skip' to help us here, use tac +
grep to do that, resulting in a one liner that makes this script work on
both older glibc versions as well as with 2.35.
With it, on fedora 36, x86, glibc 2.35:
# perf test inet_pton
90: probe libc's inet_pton & backtrace it with ping : Ok
# perf test -v inet_pton
90: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 627197
ping 627220 1 267956.962402: probe_libc:inet_pton_1: (7f488bf314c0)
1314c0 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
fa6c6 getaddrinfo+0x126 (/usr/lib64/libc.so.6)
491e n (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
#
And on Ubuntu 22.04.1 LTS on a Libre Computer ROC-RK3399-PC arm64 system:
Before this patch it works (see that the script used has no 'tac' to
remove the first event):
root@roc-rk3399-pc:~# dpkg -l | grep libc-bin
ii libc-bin 2.35-0ubuntu3.1 arm64 GNU C Library: Binaries
root@roc-rk3399-pc:~# grep -w tac ~acme/libexec/perf-core/tests/shell/record+probe_libc_inet_pton.sh
root@roc-rk3399-pc:~# perf test inet_pton
86: probe libc's inet_pton & backtrace it with ping : Ok
root@roc-rk3399-pc:~# perf test -v inet_pton
86: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 1375
ping 1399 [000] 4114.417450: probe_libc:inet_pton: (ffffb3e26120)
106120 inet_pton+0x0 (/usr/lib/aarch64-linux-gnu/libc.so.6)
d18bc getaddrinfo+0xec (/usr/lib/aarch64-linux-gnu/libc.so.6)
2b68 [unknown] (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
root@roc-rk3399-pc:~#
And after it continues to work:
root@roc-rk3399-pc:~# grep -w tac ~acme/libexec/perf-core/tests/shell/record+probe_libc_inet_pton.sh
perf script -i $perf_data | tac | grep -m1 ^ping -B9 | tac > $perf_script
root@roc-rk3399-pc:~# perf test inet_pton
86: probe libc's inet_pton & backtrace it with ping : Ok
root@roc-rk3399-pc:~# perf test -v inet_pton
86: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 6995
ping 7019 [005] 4832.160741: probe_libc:inet_pton: (ffffa62e6120)
106120 inet_pton+0x0 (/usr/lib/aarch64-linux-gnu/libc.so.6)
d18bc getaddrinfo+0xec (/usr/lib/aarch64-linux-gnu/libc.so.6)
2b68 [unknown] (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
root@roc-rk3399-pc:~#
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/Y7QyPkPlDYip3cZH@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Parametrized events are not only a powerpc domain. They occur on other
platforms too (e.g. aarch64). They should be ignored in this testcase,
since proper setup of the parameters is out of scope of this script.
Let's not filter them out by PMU name, but rather based on the fact that
they expect a parameter.
Fixes: 451ed8058c ("perf test: Fix "all PMU test" to skip hv_24x7/hv_gpci tests on powerpc")
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Link: https://lore.kernel.org/r/20221219163008.9691-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add more tests for the new filters.
$ sudo perf test contention -v
87: kernel lock contention analysis test :
--- start ---
test child forked, pid 412379
Testing perf lock record and perf lock contention
Testing perf lock contention --use-bpf
Testing perf lock record and perf lock contention at the same time
Testing perf lock contention --threads
Testing perf lock contention --lock-addr
Testing perf lock contention --type-filter
Testing perf lock contention --lock-filter
test child finished with 0
---- end ----
kernel lock contention analysis test: Ok
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221219201732.460111-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this up by moving the related file to use "grep -E" instead.
sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/perf`
Here are the steps to install the latest grep:
wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
tar xf grep-3.8.tar.gz
cd grep-3.8 && ./configure && make
sudo make install
export PATH=/usr/local/bin:$PATH
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/1668762999-9297-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Provide task-analyzer test cases for all possible arguments and a subset of possible
combinations.
12 Tests in total.
test_basic:
- cmd:"perf script report task-analyzer"
- Fundamental test of script without arguments.
- Check for standard output.
test_ns_rename:
- cmd:"perf script report task-analyzer --ns --rename-comms-by-tids 0:random"
- Standard task with timestamps in nanoseconds and comm renamed.
- Check for standard output.
test_ms_filtertasks_highlight:
- cmd:"perf script report task-analyzer --ms --filter-tasks perf --highlight-tasks perf"
- Standard task with timestamps in milliseconds, task filtered out and highlighted.
- Check for standard output.
test_extended_times_timelimit_limittasks:
- cmd "perf script report task-analyzer --extended-times --time-limit :99999"
- Standard task with additional schedule out/in info and timlimit active at 99999.
- Check for extended table output.
test_summary:
- cmd:"perf script report task-analyzer --summary"
- Standard task with additional summary output.
- Check for summary print.
test_summary_extended:
- cmd:"perf script report task-analyzer --summary-extended"
- Standard task with summary and additional schedule in/out info.
- Chceck for extended table print.
test_summaryonly:
- cmd:"perf script report task-analyzer --summary-only"
- Only summary should be printed.
- Check for summary print.
test_extended_times_summary_ns:
- cmd:"perf script report task-analyzer --extended-times --summary --ns"
- Standard task with extended schedule in/out information and summary in ns.
- Check for extended table and summary.
test_csv:
- cmd:"perf script report task-analyzer --csv csv"
- Print standard task to csv file in csv format.
- Check for csv format.
test_csv_extended_times:
- cmd:"perf script report task-analyzer --csv csv --extended-times"
- Print standard task to csv file in csv format with additional schedule in/out
information.
- Check for additional information and csv format.
test_csvsummary:
- cmd:"perf script report task-analyzer --csv-summary csvsummary"
- Print summary to csvsummary file in csv format.
- Check for csv format.
test_csvsummary_extended:
- cmd:"perf script report task-analyzer --csv-summary csvsummary --summary-extended"
- Print summary to csvsummary file in csv format with additional schedule in/out
information.
- Check for additional information and csv format.
Suggested-by: Ian Rogers <irogers@google.com>
Signed-off-by: Petar Gligoric <petar.gligoric@rohde-schwarz.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221206154406.41941-4-petar.gligor@gmail.com
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add test cases for the task and addr aggregation modes.
$ sudo ./perf test -v contention
86: kernel lock contention analysis test :
--- start ---
test child forked, pid 680006
Testing perf lock record and perf lock contention
Testing perf lock contention --use-bpf
Testing perf lock record and perf lock contention at the same time
Testing perf lock contention --threads
Testing perf lock contention --lock-addr
test child finished with 0
---- end ----
kernel lock contention analysis test: Ok
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221209190727.759804-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using precise flag with br_inst_retired.near_call causes the test fail
on KVM guests, even when the guests have PMU forwarding enabled and the
event itself is supported.
Remove the precise flag in order to make the test work on KVM guests.
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20221122083121.6012-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that it can get rid of requirement of a compiler.
$ sudo ./perf test -v 109
109: Test data symbol :
--- start ---
test child forked, pid 844526
Recording workload...
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.354 MB /tmp/__perf_test.perf.data.GFeZO (4847 samples) ]
Cleaning up files...
test child finished with 0
---- end ----
Test data symbol: Ok
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-13-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that it can get rid of requirement of a compiler. Also rename the
symbols to match with the perf test workload.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: James Clark <james.clark@arm.com>
Acked-by: German Gomez <german.gomez@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-11-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that it can get rid of requirement of a compiler. I've also removed
killall as it'll kill perf process now and run the test workload for 10
sec instead.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: James Clark <james.clark@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that it can get rid of requirement of a compiler.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that it can get rid of requirements for a compiler.
$ sudo ./perf test -v 92
92: perf record tests :
--- start ---
test child forked, pid 740204
Basic --per-thread mode test
Basic --per-thread mode test [Success]
Register capture test
Register capture test [Success]
Basic --system-wide mode test
Basic --system-wide mode test [Success]
Basic target workload test
Basic target workload test [Success]
test child finished with 0
---- end ----
perf record tests: Ok
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that it can get rid of requirement of a compiler.
Also define and use more local symbols to ease future changes.
$ sudo ./perf test -v pipe
87: perf pipe recording and injection test :
--- start ---
test child forked, pid 748003
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
748014 748014 -1 |perf
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
99.83% perf perf [.] noploop
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
99.85% perf perf [.] noploop
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.160 MB /tmp/perf.data.2XYPdw (4007 samples) ]
99.83% perf perf [.] noploop
test child finished with 0
---- end ----
perf pipe recording and injection test: Ok
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221116233854.1596378-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To support live monitoring of kernel lock contention without BPF,
it should support something like below:
# perf lock record -a -o- sleep 1 | perf lock contention -i-
contended total wait max wait avg wait type caller
2 10.27 us 6.17 us 5.13 us spinlock load_balance+0xc03
1 5.29 us 5.29 us 5.29 us rwlock:W ep_scan_ready_list+0x54
1 4.12 us 4.12 us 4.12 us spinlock smpboot_thread_fn+0x116
1 3.28 us 3.28 us 3.28 us mutex pipe_read+0x50
To do that, it needs to handle HEAD_ATTR, HEADER_EVENT_UPDATE and
HEADER_TRACING_DATA which are generated only for the pipe mode.
And setting event handler also should be delayed until it gets the
event information.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221104051440.220989-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit f4a2aade68 ("perf tests powerpc: Fix branch stack sampling
test to include sanity check for branch filter") added a skip if certain
branch options aren't available.
But the change added both -b (--branch-any) and --branch-filter options
at the same time, which will always result in a failure on any platform
because the arguments can't be used together.
Fix this by removing -b (--branch-any) and leaving --branch-filter which
already specifies 'any'. Also add warning messages to the test and perf
tool.
Output on x86 before this fix:
$ sudo ./perf test branch
108: Check branch stack sampling : Skip
After:
$ sudo ./perf test branch
108: Check branch stack sampling : Ok
Fixes: f4a2aade68 ("perf tests powerpc: Fix branch stack sampling test to include sanity check for branch filter")
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman.Khandual@arm.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221028121913.745307-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It now has 4 sub tests and at least one of them should run.
But once the TEST_SKIP (= 2) return value is set, it won't be
overwritten unless there's a failure. I think we should return success
when one or more tests are skipped but the remaining subtests are
passed.
So update the test code not to set the err variable when it skips
the test.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221020172643.3458767-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --threads option changed the 'perf record' behavior significantly,
so it'd be nice if we test it separately. Add --threads options with
different argument in each test supported and check the result.
Also update the cleanup routine because threads recording produces data
in a directory.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221020172643.3458767-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a subtest which profiles the given workload on the command line.
As it's a minimal requirement, the test should run ok so it doesn't skip
the test even if it failed to run the 'perf record' command.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221020172643.3458767-7-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add system wide recording test with the same pattern. It'd skip the
test when it fails to run 'perf record'.
For system-wide mode, it needs to avoid build-id collection and
synthesis because the test only cares about the test program and kernel
would generate the necessary events as the process starts.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221020172643.3458767-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just running the target program is not enough to test multi-thread
target because it'd be racy perf vs target startup. I used the
initial delay but it cannot guarantee for perf to see the thread.
Instead, use wait_for_threads helper from shell/lib/waiting.sh to make
sure it starts the sibling thread first. Then perf record can use -p
option to profile the target process.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221020172643.3458767-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the system has cc it could build a test program with two threads
and then use it for more detailed testing. Also it accepts an option
to run a thread forever to ensure multi-thread runs.
If cc is not found, it falls back to use the default value 'true'.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221020172643.3458767-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Basically there are 3 issues:
1. quote shell expansion
2. do not use egrep
3. use upper case letters for signal names
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221020172643.3458767-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I think it's to support non-root user tests. But perf record can handle
the case and fall back to a software event (cpu-clock). Practically this
would affect when it's run on a VM, but it seems no reason to prevent running
the test in the guest.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221020172643.3458767-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The virtual LBR test uses a python script to check the max size of
branch stack in the Intel-PT generated LBR. But it didn't check whether
python scripting is available (as it's optional).
Let's skip the test if the python support is not available.
Fixes: f77811a0f6 ("perf test: test_intel_pt.sh: Add 9 tests")
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ammy Yi <ammy.yi@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221021181055.60183-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Testcase stat+json_output.sh fails in powerpc:
86: perf stat JSON output linter : FAILED!
The testcase "stat+json_output.sh" verifies perf stat JSON output. The
test covers aggregation modes like per-socket, per-core, per-die, -A
(no_aggr mode) along with few other tests. It counts expected fields for
various commands. For example say -A (i.e, AGGR_NONE mode), expects 7
fields in the output having "CPU" as first field. Same way, for
per-socket, it expects the first field in result to point to socket id.
The testcases compares the result with expected count.
The values for socket, die, core and cpu are fetched from topology
directory:
/sys/devices/system/cpu/cpu*/topology.
For example, socket value is fetched from "physical_package_id" file of
topology directory. (cpu__get_topology_int() in util/cpumap.c)
If a platform fails to fetch the topology information, values will be
set to -1. For example, incase of pSeries platform of powerpc, value for
"physical_package_id" is restricted and not exposed. So, -1 will be
assigned.
Perf code has a checks for valid cpu id in "aggr_printout"
(stat-display.c), which displays the fields. So, in cases where topology
values not exposed, first field of the output displaying will be empty.
This cause the testcase to fail, as it counts number of fields in the
output.
Incase of -A (AGGR_NONE mode,), testcase expects 7 fields in the output,
becos of -1 value obtained from topology files for some, only 6 fields
are printed. Hence a testcase failure reported due to mismatch in number
of fields in the output.
Patch here adds a sanity check in the testcase for topology. Check will
help to skip the test if -1 value found.
Fixes: 0c343af2a2 ("perf test: JSON format checking")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Suggested-by: Ian Rogers <irogers@google.com>
Suggested-by: James Clark <james.clark@arm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Claire Jensen <cjense@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Link: https://lore.kernel.org/r/20221006155149.67205-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Testcase stat+csv_output.sh fails in powerpc:
84: perf stat CSV output linter: FAILED!
The testcase "stat+csv_output.sh" verifies perf stat CSV output. The
test covers aggregation modes like per-socket, per-core, per-die, -A
(no_aggr mode) along with few other tests. It counts expected fields for
various commands. For example say -A (i.e, AGGR_NONE mode), expects 7
fields in the output having "CPU" as first field. Same way, for
per-socket, it expects the first field in result to point to socket id.
The testcases compares the result with expected count.
The values for socket, die, core and cpu are fetched from topology
directory:
/sys/devices/system/cpu/cpu*/topology.
For example, socket value is fetched from "physical_package_id" file of
topology directory. (cpu__get_topology_int() in util/cpumap.c)
If a platform fails to fetch the topology information, values will be
set to -1. For example, incase of pSeries platform of powerpc, value for
"physical_package_id" is restricted and not exposed. So, -1 will be
assigned.
Perf code has a checks for valid cpu id in "aggr_printout"
(stat-display.c), which displays the fields. So, in cases where topology
values not exposed, first field of the output displaying will be empty.
This cause the testcase to fail, as it counts number of fields in the
output.
Incase of -A (AGGR_NONE mode,), testcase expects 7 fields in the output,
becos of -1 value obtained from topology files for some, only 6 fields
are printed. Hence a testcase failure reported due to mismatch in number
of fields in the output.
Patch here adds a sanity check in the testcase for topology. Check will
help to skip the test if -1 value found.
Fixes: 7473ee56db ("perf test: Add checking for perf stat CSV output.")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Suggested-by: Ian Rogers <irogers@google.com>
Suggested-by: James Clark <james.clark@arm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Claire Jensen <cjense@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Link: https://lore.kernel.org/r/20221006155149.67205-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add tests:
Test with MTC and TSC disabled
Test with branches disabled
Test with/without CYC
Test recording with sample mode
Test with kernel trace
Test virtual LBR
Test power events
Test with TNT packets disabled
Test with event_trace
These tests mostly check that perf record works with the corresponding
Intel PT config terms, sometimes also checking that certain packets do or
do not appear in the resulting trace as appropriate.
The "Test virtual LBR" is slightly trickier, using a Python script to
check that branch stacks are actually synthesized.
Signed-off-by: Ammy Yi <ammy.yi@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-8-adrian.hunter@intel.com
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test for decoding self-modifying code using a jitdump file.
The test creates a workload that uses self-modifying code and generates its
own jitdump file. The result is processed with perf inject --jit and
checked for decoding errors.
Note the test will fail without patch "perf inject: Fix GEN_ELF_TEXT_OFFSET
for jit" applied.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tidy alignment of test function lines to make them more readable.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Messages display with the perf test -v option. Add a message to show when
skipping a test because the user cannot do kernel tracing.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When not decoding, the options "-B -N --no-bpf-event" speed up perf record.
Make a common function for them.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
count_result() does not always reset ret=0 which means the value can spill
into the next test result.
Fix by explicitly setting it to zero between tests.
Committer testing:
# perf test "Miscellaneous Intel PT testing"
110: Miscellaneous Intel PT testing : Ok
#
Tested as well with:
# perf test -v "Miscellaneous Intel PT testing"
Fixes: fd9b45e39c ("perf test: test_intel_pt.sh: Fix return checking")
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221014170905.64069-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This test commonly fails on Arm Juno because the instruction interval
is large enough to miss generating any samples for Perf in system-wide
mode.
Fix this by lowering the interval until a comfortable number of Perf
instructions are generated. The test is still quick to run because only
a small amount of trace is gathered.
Before:
sudo ./perf test coresight -vvv
...
Recording trace with system wide mode
Looking at perf.data file for dumping branch samples:
Looking at perf.data file for reporting branch samples:
Looking at perf.data file for instruction samples:
CoreSight system wide testing: FAIL
...
After:
sudo ./perf test coresight -vvv
...
Recording trace with system wide mode
Looking at perf.data file for dumping branch samples:
Looking at perf.data file for reporting branch samples:
Looking at perf.data file for instruction samples:
CoreSight system wide testing: PASS
...
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20221005140508.1537277-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds scripts to drive the unroll thread tests to compare perf
output against a minimum bar of content/quality.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220909152803.2317006-12-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add test tool to be driven by further test scripts. This is a simple C
based test that is for arm64 with some inline ASM to manually unroll a
lot of code to have a very long sequence of commands.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220909152803.2317006-11-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a script to drive the thread loop test that gathers data so
it passes a minimum bar (in this case do we get any perf context data
for every thread).
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220909152803.2317006-10-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add test tool to be driven by further test scripts. This is a simple C
based loop with threads test to drive from scripts that can output TIDs
for tracking/checking.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220909152803.2317006-9-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a script to drive the threaded memcpy test that gathers data so it
passes a minimum bar for amount and quality of content that we extract
from the kernel's perf support.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220909152803.2317006-8-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add test tool to be driven by further test scripts. This is a simple C
based memcpy with threads test to drive from scripts.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220909152803.2317006-7-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a script to drive the asm pureloop test for arm64/CoreSight that
gathers data so it passes a minimum bar for amount and quality of
content that we extract from the kernel's perf support.
Committer notes:
Add the install of tests/shell/coresight/*.sh to
tools/perf/Makefile.perf as we're starting to populate that dir.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220909152803.2317006-5-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add test tool to be driven by further test scripts. This tool is pure
arm64 ASM with no libc usage to ensure it is the same exact binary/code
every time so it can also be re-used for many uses. It just loops for a
given fixed number of loops.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20220909152803.2317006-4-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds the initial build infrastructure (makefiles maintainers
information) for adding follow-on tests for CoreSight.
Committer notes:
Remove the installation of tests/shell/coresight/*.sh, as there are no
files there yet and thus, at this point, make install fails.
Use $(QUIET_CLEAN) to avoid having extraneous output in the 'make clean'
output.
Also use @$(MAKE) in tools/perf/tests/shell/coresight/Makefile as $(Q)
is not turning into @ when V=1 isn't used, i.e. in the default case it
is not being quiet.
The >/dev/null in the all for tools/perf/tests/shell/coresight/Makefile
is to avoid this:
make[4]: Nothing to be done for 'all'.
make[4]: Nothing to be done for 'all'.
make[4]: Nothing to be done for 'all'.
DESCEND plugins
GEN /tmp/build/perf/python/perf.so
make[4]: Nothing to be done for 'all'.
INSTALL trace_plugins
On !arm64 where nothing is done on the main target for
tools/perf/tests/shell/coresight/*/Makefile.
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: http://lore.kernel.org/lkml/20220909152803.2317006-3-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This adds a library of shell "code" to be shared and used by future
tests that target quality testing for Arm CoreSight support in perf
and the Linux kernel.
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: http://lore.kernel.org/lkml/20220909152803.2317006-2-carsten.haitzler@foss.arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
