Rename `tegra_machine_event` to `loongson_asoc_machine_event` and
`loongson_aosc_dapm_widgets` to `loongson_asoc_dapm_widgets` to
accurately reflect the hardware platform. Update all references
accordingly.
No functional change is introduced.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Keguang Zhang <keguang.zhang@gmail.com>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20260818092052.3596347-1-zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The Loongson-2K0300 audio card uses a different DAI format compared to
existing Loongson platforms.
Move the dai_fmt setting from the static DAI link to runtime hw_params
via snd_soc_runtime_set_dai_fmt(), and pass the correct format through
driver match data.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/ed1314e1d3275fd20aff47397345a88fad6e9368.1782439646.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The Loongson-2K0300 I2S interface differs significantly from the
Loongson-2K1000. Although both utilize external DMA controllers, the
Loongson-2K0300 does not require additional registers for routing
configuration.
Due to hardware design flaw, an extra controller reset sequence is
required during probe.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/4d3caa62d4275e1495505387198408f4d30d453c.1782439646.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
There's been quite a lot of framework improvements this time around,
though mainly cleanups and robustness rather than user visible features.
The same pattern is seen with a lot of the driver work that's going on,
there are new features but a huge proportion of this is bug fixing and
cleanup work. We also have a good selectio of new device support.
- Improvements to SDCA jack handling from Charles Keepax.
- Use of device links to make suspend handling more robust from Richard
Fitzgerald.
- Use of a new helper to factor out a common pattern in SoundWire
enmeration from Charles Keepax.
- Slimming down of the component from Kuninori Morimoto.
- Simplification of format auto selection from Kuninori Morimoto.
- Lots of conversions to guard() from Bui Duc Phuc.
- Addition of a simple-amplifier driver supporting more featureful GPIO
controller amplifiers than the previous basic driver from Herve
Codina.
- Support for AMD ACP 7.x, Cirrus Logic CS42448/CS42888, Everest Semi
ES9356, Mediatek MT2701 and MT8196, Renesas RZ/G3E, Spacemit K3,
Texas Instruments TAC5xx2 and TAS67524.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmov9IgACgkQJNaLcl1U
h9BOYQf/fLQJlwAIQJu540syYQL9N7Lz/+6f41WEAeF86npaz1wvggwX7rWsOlCB
f+6bGiQ/QvYGrDlKBoIRvbrcUosYo5RcPveBhLUeYQ6w2wyhYR5bjF77YMFHHIWm
h+8wG4Cf59SnAvQ2sdctcKgaCbnJgN8IfTIhdGDQwDi2vf9AUO7o4pfKXO/wligq
4vBeuFLM+WgU5x0VhvwIU6yfa8MGSMvf/oX0bn3xYjOp2LyHzdfRGvoY/wa+6pFd
9QX2QsU6Yjrt5/zvuENwOq+nb3NbdDDqdQK8PRDnzYsbhpFj1RA5XRVShhk89h3F
TZyRqht++Vfs0b3CNW1Q59XZgxNX8A==
=3lzj
-----END PGP SIGNATURE-----
Merge tag 'asoc-v7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v7.2
There's been quite a lot of framework improvements this time around,
though mainly cleanups and robustness rather than user visible features.
The same pattern is seen with a lot of the driver work that's going on,
there are new features but a huge proportion of this is bug fixing and
cleanup work. We also have a good selectio of new device support.
- Improvements to SDCA jack handling from Charles Keepax.
- Use of device links to make suspend handling more robust from Richard
Fitzgerald.
- Use of a new helper to factor out a common pattern in SoundWire
enmeration from Charles Keepax.
- Slimming down of the component from Kuninori Morimoto.
- Simplification of format auto selection from Kuninori Morimoto.
- Lots of conversions to guard() from Bui Duc Phuc.
- Addition of a simple-amplifier driver supporting more featureful GPIO
controller amplifiers than the previous basic driver from Herve
Codina.
- Support for AMD ACP 7.x, Cirrus Logic CS42448/CS42888, Everest Semi
ES9356, Mediatek MT2701 and MT8196, Renesas RZ/G3E, Spacemit K3,
Texas Instruments TAC5xx2 and TAS67524.
The "invalid position" error occurred when the DMA position descriptor
returned an invalid address value (e.g., pos = -1048838144). This happened
because the `bytes_to_frames()` function returns a signed value, but when
`addr < runtime->dma_addr`, the subtraction produces a negative result that
gets interpreted as a large unsigned integer in comparisons.
when the addr is abnormal, for example,the DMA controller is abnormal in
hardware,x=0 should not be a point(x == runtime->buffer_size),but a range,
which includes the addr address being less than runtime ->dma1-adr, and
the addr exceeding the DMA address range.the value of pos should not better
a negative，return 0, maybe better.
[ 32.834431][ 2] soc-audio soc-audio: invalid position: , pos = -1048838144
[ 32.845019][ 2] soc-audio soc-audio: invalid position: , pos = -1048838144
[ 32.855588][ 2] soc-audio soc-audio: invalid position: , pos = -1048838144
[ 32.866145][ 2] soc-audio soc-audio: invalid position: , pos = -1048838144
[ 32.995394][ 2] soc-audio soc-audio: invalid position: , pos = -1048838144
[ 33.006025][ 2] soc-audio soc-audio: invalid position: , pos = -1048838144
[ 33.016748][ 2] soc-audio soc-audio: invalid position: , pos = -1048838144
Signed-off-by: Li Jun <lijun01@kylinos.cn>
[Remove XRUN reporting I'd mistakenly avised adding on prior review -- broonie]
Link: https://patch.msgid.link/20260611010045.3668574-1-lijun01@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The Loongson I2S platform driver (used on LS2K1000, LS7A etc.) relies on
an external DMA engine (e.g., dw_dmac) rather than the internal DMA.
However, its DMA-related code was originally embedded in
loongson_i2s_plat.c, duplicating logic that should be shared.
Extract the external DMA (eDMA) support from the platform driver and move
it into loongson_dma.c alongside the existing internal DMA (iDMA) code.
This change eliminates code duplication and prepares for future
consolidation of DMA selection logic.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/979368ad269f192703ed24e9a19eebce32316745.1780304703.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The Loongson I2S controller can work with two types of DMA:
- Internal DMA (iDMA): integrated DMA engine, driven by dedicated
registers and interrupts.
- External DMA (eDMA): generic DMA engine (e.g., dw_dmac), using the
standard dmaengine API.
To distinguish these two distinct implementations, rename all
internal-DMA-related structures, functions, and the component driver
to use the "idma" prefix.
No functional change intended.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/58e91c54f2bf658ac9b773741ca2aebc3866e550.1780304703.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously, the regmap configuration for Loongson I2S controller was
duplicated in both PCI and platform glue drivers. Move the common
regmap configuration into the shared loongson_i2s.c to avoid code
duplication and centralize register access handling.
While moving, adjust the following:
- Mark RX_DATA/TX_DATA/I2S_CTRL as volatile registers. The PCI version
incorrectly marked CFG/CFG1 as volatile, which prevented proper
regcache synchronization.
- Change cache type from REGCACHE_FLAT to REGCACHE_MAPLE. The register
map is sparse and the number of registers is small; MAPLE tree provides
better scalability and is the recommended cache type for modern
regmap users.
Also, the following warning for the i2s_plat driver will be eliminated:
loongson-i2s-plat loongson-i2s: using zero-initialized flat cache, this may cause unexpected behavior.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/e32d24479fc382dc3de6aded6351c13b43b6391d.1780304703.git.zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
We have been used pcm_new()/pcm_free(), but switched to
pcm_construct()/pcm_destruct() to use extra parameters [1].
pcm_new()/free() had been removed [2], but each drivers are still
using such function naming. Let's name back to pcm_new()/pcm_free()
again.
[1] commit c64bfc9066 ("ASoC: soc-core: add new pcm_construct/pcmdestruct")
[2] commit e9067bb502 ("ASoC: soc-component: remove snd_pcm_ops from component driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87pl54jyqm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Current Kconfig menu at [ALSA for SoC audio support] has no rules.
So, some venders are using menu style, some venders are listed each drivers
on top page, etc. It is difficult to find target vender and/or drivers
because it is very random.
Let's standardize ASoC menu
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87sek5ybr0.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit 25704938c86d7b2 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") and 1239f681359926101e ("scripts/misc-check:
check unnecessary #include <linux/export.h> when W=1"), we get some build
warnings with W=1:
sound/soc/loongson/loongson_i2s.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
So fix these build warnings for ASoC/Loongson.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20250608142737.168829-1-chenhuacai@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Keguang Zhang <keguang.zhang@gmail.com>:
Add the driver and dt-binding document for Loongson-1 AC97.
Add the dt-binding document for Realtek ALC203 Codec.
Add DT support for the AC97 generic codec driver.
pcim_iomap_table() and pcim_iomap_regions() have been deprecated.
Replace them with pcim_iomap_region().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20250404121911.85277-13-phasta@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
An object file should not be linked into multiple modules and/or
vmlinux:
scripts/Makefile.build:221: /home/arnd/arm-soc/sound/soc/loongson/Makefile: loongson_i2s.o is added to multiple modules: snd-soc-loongson-i2s-pci snd-soc-loongson-i2s-plat
Change this one to make it a library module with two exported symbols
that will work in any configuration.
Fixes: ba4c5fad59 ("ASoC: loongson: Add I2S controller driver as platform device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20241015150958.2294155-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes the below if kernel config disable PCI support:
sound/soc/loongson/loongson_i2s_pci.c:157:1: warning: data definition has no type or storage class
157 | module_pci_driver(loongson_i2s_driver);
| ^~~~~~~~~~~~~~~~~
sound/soc/loongson/loongson_i2s_pci.c:157:1: error: type defaults to 'int' in declaration of 'module_pci_driver' [-Wimplicit-int]
sound/soc/loongson/loongson_i2s_pci.c:157:1: error: parameter names (without types) in function declaration [-Wdeclaration-missing-parameter-type]
sound/soc/loongson/loongson_i2s_pci.c:149:26: warning: 'loongson_i2s_driver' defined but not used [-Wunused-variable]
149 | static struct pci_driver loongson_i2s_driver = {
| ^~~~~~~~~~~~~~~~~~~
Add the appropriate Kconfig dependency.
Fixes: ba4c5fad59 ("ASoC: loongson: Add I2S controller driver as platform device")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410101647.o1lI37ou-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202410101439.Tfn5aT6i-lkp@intel.com/
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/20241012095840.965087-1-zhoubinbin@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the function dev_err_probe can simplify code, but
the error return should not be deleted, that is
unreasonable, thus fix it.
Fixes: 3d2528d6c0 ("ASoC: loongson: Simplify with dev_err_probe()")
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://patch.msgid.link/20240910021104.3400-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the function loongson_asoc_card_probe, it is simpler
to return the value of function devm_snd_soc_register_card
directly.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://patch.msgid.link/20240906100523.2142-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In function loongson_card_parse_of(), when get device_node
'codec' failed, the function of_node_put(codec) should not
be invoked, thus fix error release.
Fixes: d24028606e ("ASoC: loongson: Add Loongson ASoC Sound Card Support")
Signed-off-by: tangbin <tangbin@cmss.chinamobile.com>
Link: https://patch.msgid.link/20240903090620.6276-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240507155540.24815-16-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
PCI core in pci_register_driver() already sets the .owner, so driver
does not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327-module-owner-var-v1-1-86d5002ba6dc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC is now unified asoc_xxx() into snd_soc_xxx().
This patch convert asoc_xxx() to snd_soc_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bke8qnh3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASoC Sound Card driver can be compile tested with !CONFIG_OF
making 'loongson_asoc_dt_ids' unused:
sound/soc/loongson/loongson_card.c:200:34: warning: unused variable 'loongson_asoc_dt_ids' [-Wunused-const-variable]
As krzysztof advice, we drop of_match_ptr so the device id
can also be used on ACPI.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307242008.xqdjgk04-lkp@intel.com
Fixes: d24028606e ("ASoC: loongson: Add Loongson ASoC Sound Card Support")
Signed-off-by: YingKun Meng <mengyingkun@loongson.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230726110516.703342-1-mengyingkun@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2s driver uses the mapped __iomem address of the FIFO as the DMA
address for the device. This apparently works on loongarch because of
the way it handles __iomem pointers as aliases of physical addresses,
but this is not portable to other architectures and causes a compiler
warning when dma addresses are not the same size as pointers:
sound/soc/loongson/loongson_i2s_pci.c: In function 'loongson_i2s_pci_probe':
sound/soc/loongson/loongson_i2s_pci.c:110:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
110 | tx_data->dev_addr = (dma_addr_t)i2s->reg_base + LS_I2S_TX_DATA;
| ^
sound/soc/loongson/loongson_i2s_pci.c:113:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
113 | rx_data->dev_addr = (dma_addr_t)i2s->reg_base + LS_I2S_RX_DATA;
| ^
Change the driver to instead use the physical address as stored in the
PCI BAR resource directly. Since 'dev_addr' is a 32-bit address, I think
this results in the same truncated address on loongarch but is otherwise
closer to portable code and avoids the warning.
Fixes: d84881e068 ("ASoC: Add support for Loongson I2S controller")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/Message-Id: <20230622101235.3230941-1-arnd@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC has snd_soc_{of_}get_dai_name() to get DAI name
for dlc (snd_soc_dai_link_component).
But we now can use snd_soc_{of_}get_dlc() for it. Let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ilbidgmn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current snd_soc_of_get_dai_name() doesn't accept index
for #sound-dai-cells. It is not useful for user.
This patch adds it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pm5qdgng.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The acpi_node_get_property_reference() function returns kernel error
codes and not ACPI error codes. So, although it does not affect the
compiled code, using the ACPI_FAILURE() macro is wrong. Secondly,
if the is_acpi_device_node() function returns false, then we should
return -ENOENT instead of returning success.
Fixes: d24028606e ("ASoC: loongson: Add Loongson ASoC Sound Card Support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/fb14815d-2f9a-4b42-b193-cec61e7417ca@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
DIV_ROUND_CLOSEST() does not work on 64-bit variables when building for
a 32-bit target:
ld.lld: error: undefined symbol: __udivdi3
>>> referenced by loongson_i2s.c
>>> sound/soc/loongson/loongson_i2s.o:(loongson_i2s_hw_params) in archive vmlinux.a
Use DIV_ROUND_CLOSEST_ULL() instead.
Fixes: d24028606e ("ASoC: loongson: Add Loongson ASoC Sound Card Support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230616090156.2347850-4-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The new driver fails to build when PCI is disabled:
WARNING: unmet direct dependencies detected for SND_SOC_LOONGSON_I2S_PCI
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && (LOONGARCH || COMPILE_TEST [=y]) && PCI [=n]
Selected by [y]:
- SND_SOC_LOONGSON_CARD [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && (LOONGARCH || COMPILE_TEST [=y])
sound/soc/loongson/loongson_i2s_pci.c:167:1: error: type specifier missing, defaults to 'int'; ISO C99 and later do not support implicit int [-Wimplicit-int]
module_pci_driver(loongson_i2s_driver);
Add the appropriate Kconfig dependency.
Fixes: d24028606e ("ASoC: loongson: Add Loongson ASoC Sound Card Support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230616090156.2347850-3-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Build testing without CONFIG_PM_SLEEP causes a warning:
sound/soc/loongson/loongson_i2s.c:246:12: error: unused function 'i2s_suspend' [-Werror,-Wunused-function]
sound/soc/loongson/loongson_i2s.c:255:12: error: unused function 'i2s_resume' [-Werror,-Wunused-function]
Use the modern SYSTEM_SLEEP_PM_OPS() instead of the old one to avoid this.
Fixes: d24028606e ("ASoC: loongson: Add Loongson ASoC Sound Card Support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230616090156.2347850-2-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The Loongson ASoC Sound Card is a general ASoC DAI Link driver that
can be used for Loongson CPU DAI drivers and external CODECs.
The driver supports the use of ACPI table to describe device resources.
On loongson 7axxx platforms, the audio device is an ACPI device.
Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn>
Link: https://lore.kernel.org/r/20230614122240.3402762-1-mengyingkun@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
