For PTL onwards Cirrus are intending to rely on function topologies,
rather than using a match table for each system type. Remove this
unnecessary match table entry. Having the match entries can
mean that systems match when they should use function topologies
instead, resulting in incorrect audio configurations. Although,
admittedly this is not too likely with this 6x amp configuration
as those are quite rare, but best to follow best practice.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260520163631.3300102-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For PTL onwards Cirrus are intending to rely on function
topologies, rather than using a match table for each system
type. Chrome systems tend to have custom magic in the topology
and thus need to load a specific file. This causes problems as
these system can have the same layout as generic laptops causing
the match to apply to other laptops. Add a DMI quirk that forces
these matches to only apply to specific devices.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260520163631.3300102-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding ES83x6 I2S codec support for NVL platforms and entry in match table.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260520061143.2024963-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a SoundWire machine table entry for the LG Gram Pro 2026
(16Z90U-KU7BK), which has an unusual configuration:
sdw:0:1:025d:1320:01 single stereo RT1320 SmartAmp on link 1
sdw:0:3:025d:0713:01 RT713 jack/headset codec on link 3
Existing rt713-rt1320 boards have two RT1320 amps on different links
("link_mask = BIT(1) | BIT(2) | BIT(3)"). The LG Gram uses a single
stereo RT1320 chip, so the new entry uses "link_mask = BIT(1) |
BIT(3)" with the existing rt1320_1_group2_adr structure, leaving the
two-channel routing to the topology.
The RT713 on this board does not expose a SMART_MIC function in
ACPI, so the .machine_check callback used by the existing entries
(snd_soc_acpi_intel_sdca_is_device_rt712_vb) would reject this
board. Drop machine_check for the new entry; speaker output and
the headset jack do not depend on the SMART_MIC presence check.
The corresponding topology source has been submitted to the SOF
project at https://github.com/thesofproject/sof/pull/10760 . The
generated sof-ptl-rt713-l3-rt1320-l1-2ch.tplg and
nhlt-sof-ptl-rt713-l3-rt1320-l1.bin will follow in linux-firmware
once that lands.
Tested on Ubuntu 26.04 with kernel 7.0.0-15: speaker (RT1320
stereo), headphone jack with auto-routing, headset mic, and the
internal NHLT DMIC array all work via the UCM HiFi profile.
Signed-off-by: Jang Pyohwan <vhgksl@daum.net>
Link: https://patch.msgid.link/20260509175317.DnhjxHczQay7kkp5z6t4lg@vhgksl.daum.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for using the rt712 multi-function codec on link 0 and the
rt1320 amplifier on link 3 on ARL platforms.
Signed-off-by: Gary C Wang <gary.c.wang@intel.com>
Co-developed-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260508104239.1247525-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the SOF device driver enumerates the machine tables,
it selects the entry with the most numbers of matched links in
ascending order.
Align the ordering with commit 08095e2099
("ASoC: Intel: soc-acpi-intel-ptl-match: Sort ACPI link/machine tables").
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260508104239.1247525-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use functional topologies to support RT722 topologies with/without
amplifiers,
e.g. sof-ptl-rt722.tplg, sof-ptl-rt722-rt1320.tplg...
If these entries are not removed, they will find the first same link of
sof-ptl-rt722.tplg.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Co-developed-by: Derek Fang <derek.fang@realtek.com>
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260326075303.1083567-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use functional topologies to support all RT721-related topology and
amplifier combinations,
e.g. sof-ptl-rt721.tplg, sof-ptl-rt721-l3-rt1320-l3.tplg.
If these entries are not removed, they will all use the sof-ptl-rt721.tplg.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260203100027.3741754-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Chris Morgan <macroalpha82@gmail.com>:
Add support for the Anbernic RG-DS Speaker Amplifiers. The Anbernic
RG-DS uses two AW87391 ICs at 0x58 and 0x5B on i2c2. However, the
manufacturer did not provide a firmware file, only a sequence of
register writes to each device to enable and disable them.
Add support for this *specific* configuration in the AW87390 driver.
Since we are relying on a device specific sequence I am using a
device specific compatible string. This driver does not currently
support the aw87391 for any other device as I have none to test
with valid firmware. Attempts to create firmware with the AwinicSCPv4
have not been successful.
rt1320_2_group2_adr works with rt1320_1_group2_adr and the name_prefix
should be rt1320-2.
Fixes: ffe450cb6b ("ASoC: Intel: soc-acpi-intel-ptl-match: add rt713_vb_l3_rt1320_l12 support")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260123113809.2238766-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt722 amp and rt1320 amps are aggregated in this case.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20260119091749.1752088-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
rt722 is aggregated with rt1320 amp in arl_rt722_l0_rt1320_l2 and it is
the only audio configuration in the ARL platform. Set .aggregated = 1 to
represent the fact and avoid unexpected issue.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20260119091749.1752088-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:
This series provides several fixes and cleanup patches for the Nuvoton
NAU88L21 audio codec driver.
Testing and validation has been performed on Valve Steam Deck.
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
These two commits add support for 6 amps with feedback, primarily for
the CDB35L56-EIGHT-C and CDB35L63-CB8 and similar hardware.
Add changes to support 4 tas2783A devices on mtl platform.
The supported unique IDs are updated to 9, a, c, d, where
c and d are configured to play left channels and 9 and a
are configured to play right channel.
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Link: https://patch.msgid.link/20251215153219.810-6-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add match for 6x CS35L63, 3x on link 2 and 3x on link 3.
This is to support 6 amps on the CDB35L63-CB8 board.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251217163227.1186373-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a match for 6x CS35L56, 3x on link 0 and 3x on link 1.
To support the CDB35L56-EIGHT-C board using 6 amps.
This is the same as the existing 8-amp configuration
mtl_cs35l56_x8_link0_link1_fb, but reduced to 6 amps.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251217163227.1186373-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement tas2563 support code in this common module so it could be
shared between multiple SOF machine drivers.
Signed-off-by: David Lin <david.lin@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251217110433.3558136-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Revert "ASoC: Intel: soc-acpi-intel-nvl-match: add rt722 l3 support"
NVL should be only using functional topologies for products, no monolithic
topologies are planned to be released.
In parallel a feature has been landed [1] which allows to remove the
entries from the match table for sdca codecs to rely solely on function
fragments.
This reverts commit 41566e3de4.
Link: https://lore.kernel.org/linux-sound/20251014071335.3844631-1-yung-chuan.liao@linux.intel.com/
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251215101036.9370-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When there is no fallback possibility available for the function topology
use it is better to try to create a profile for the card in best effort
manner, leaving out non supported links for example.
As an example: some laptops present SSPx-BT link but we don't have fragment
yet to support this. If we only have support for functional topology
without monolithic fallback then we would fail the card creation.
The reason why the monolithic topology works on the same device is that it
does not have the SSPx-BT link handled, it is ignored.
In case when there is no fallback possibility we should try to create the
card with links that we support as best effort instead of failing and
leaving the user without a card.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251215101036.9370-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is a very large set of updates, as well as some more extensive
cleanup work from Morimto-san we've also added a generic SCDA class
driver for SoundWire devices enabling us to support many chips with
no custom code. There's also a batch of new drivers added for both
SoCs and CODECs.
- Added a SoundWire SCDA generic class driver, pulling in a little
regmap work to support it.
- A *lot* of cleaup and API improvement work from Morimoto-san.
- Lots of work on the existing Cirrus, Intel, Maxim and Qualcomm
drivers.
- Support for Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830.
This also pulls in some gpiolib changes supporting shared GPIOs in the
core there so we can convert some of the ASoC drivers open coding
handling of that to the core functionality.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkt6lUACgkQJNaLcl1U
h9D7dgf+JP2+yZIeRBud7CEO4Docda2uoRssT7GAIY/Rqrpem5FI0c0pWyZISvhn
scyjkoCrQfHEoeYrtC3l5bDI7F8o5Tc91hGzhJiCi3mb8jSwi+CaNIpR0Cet3epV
B9wQgzxlxbmKCxJRUYTPQF3n1uBJWc5EBHSc5QPddTZ0vdUfSlX0FAKHsabpmaOC
TpkdJnOlH8WUokmP3kP3TpzlflmOSLehnWX4BelJe5Os5O0PQpiKh/JG3oCYHSmc
yEbzCjOaya80HHn11FShOpy+B4b6sLUMcN+CAmDiLAdNFGvvjgmjpwwZtLYAm09Z
zFhN7XuVk1vXf+Zx/jHqYKaZtvvAsQ==
=Xwls
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.19
This is a very large set of updates, as well as some more extensive
cleanup work from Morimto-san we've also added a generic SCDA class
driver for SoundWire devices enabling us to support many chips with
no custom code. There's also a batch of new drivers added for both
SoCs and CODECs.
- Added a SoundWire SCDA generic class driver, pulling in a little
regmap work to support it.
- A *lot* of cleaup and API improvement work from Morimoto-san.
- Lots of work on the existing Cirrus, Intel, Maxim and Qualcomm
drivers.
- Support for Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830.
This also pulls in some gpiolib changes supporting shared GPIOs in the
core there so we can convert some of the ASoC drivers open coding
handling of that to the core functionality.
Add rt722 on SDW link 3 support
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251104121650.21872-5-peter.ujfalusi@linux.intel.com
For now the tables are basic for mockup devices
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251104121650.21872-4-peter.ujfalusi@linux.intel.com
This patch adds the aggregated mode support:
cs42l43 codec with left and right tweeters on soundwire link 3,
cs35l56 left and right woofers on soundwire link 2.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251111123737.246626-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for the RT722 codec on SoundWire link 0,
and RT1320 left and right amplifiers on links 2 and 3, respectively.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251111123737.246626-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Removing this match entry ensures that a PTL system comprising of a
cs42l43 codec on link3 will use function topologies.
Previously the behaviour would be use the monolithic topology associated
with this codec match table entry in preference to function topologies
and if the system had a number of smart amplifiers then they would not
be instantiated.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20251016112601.187020-1-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Function topology must be used if the ACPI match table is created based
on the reported ACPI table because the monolithic topology is not picked
for the audio configuration.
Escalate the log and ask the user to download the latest topologies.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251009094023.3474895-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sof_sdw_get_tplg_files function is a callback of snd_soc_acpi_mach.
Export it to allow other modules to use it.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251009094023.3474895-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Stefan Binding <sbinding@opensource.cirrus.com>:
In PC systems using ACPI, the driver is able to read back an SSID from
the _SUB property. This SSID uniquely identifies the system, which
enables the driver to read the correct firmware and tuning for that
system from linux-firmware. Currently there is no way of reading this
property from device tree. Add an equivalent property in device tree
to perform the same role.
acpi match changes to support tas2783a on mtl
on link 0 for 2 devices
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Link: https://patch.msgid.link/20250912083624.804-5-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding HDMI-In capture support for the PTL products which doesn't have
onboard I2S codec. But need to support HDMI-In capture via I2S and
audio playback through HDMI/DP monitor.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250915025655.1154279-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's a few new drivers here and quite a lot of cleanup work from
Morimoto-san but generally this has been quite a quiet release,
resulting in a fairly small diffstat. Highlights include:
- Refactoring of the Kconfig menus to be hopefully more consistant and
easier to navigate.
- Refactoring of the DAPM code, mainly hiding functionality that
doesn't need to be exposed to drivers.
- Removal of the unused upstream weak paths DAPM functionality.
- Further work on the generic handling for SoundWire SDCA devices.
- Cleanups of our usage of the PM autosuspend functions, this pulls in
some PM core changes on a shared tag.
- Support for AMD ACP7.2 and SoundWire on ACP 7.1, Fairphone 4 & 5,
various Intel systems, Qualcomm QCS8275, Richtek RTQ9124 and TI TAS5753.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmiCG4gACgkQJNaLcl1U
h9DDLAgAg48dNlG1argnaoTmWQ8j5fVV2aCfzPL3+UxIj/Jy3HQGusUXuCqvxCnl
CeZ249oQMACSxwaBthFXoFoSiv9KkD+FbB+mw+BjJWnE77fP56Z+nqR2LE2xWRTU
F4gcGu5aeqxjFDtmWf9xEh27hgtIB63P98CkXGyJKxxvTtWCp/JQzkvRJRN3Hpuf
9lFQr7GSt3aaNOxyon9aOczAfMa/BWcfmL7BVesuXtWzTKVJiFJVTS1mhl/7NNVR
oZ1QLj8OdJOFWddyWwN8okZZ6omHdpdtnRWw/FOA0PiCALpBpXvd9FAuFfIA+FrU
5fCDfYgvkX1sz1csD1RaOs2nGAehxA==
=GR/0
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.17
There's a few new drivers here and quite a lot of cleanup work from
Morimoto-san but generally this has been quite a quiet release,
resulting in a fairly small diffstat. Highlights include:
- Refactoring of the Kconfig menus to be hopefully more consistant and
easier to navigate.
- Refactoring of the DAPM code, mainly hiding functionality that
doesn't need to be exposed to drivers.
- Removal of the unused upstream weak paths DAPM functionality.
- Further work on the generic handling for SoundWire SDCA devices.
- Cleanups of our usage of the PM autosuspend functions, this pulls in
some PM core changes on a shared tag.
- Support for AMD ACP7.2 and SoundWire on ACP 7.1, Fairphone 4 & 5,
various Intel systems, Qualcomm QCS8275, Richtek RTQ9124 and TI TAS5753.
Added match table entry on ptl machines to support HDMI-In capture
with rt5682 I2S audio codec. also added the respective quirk
configuration in rt5682 machine driver.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250716082300.1810352-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peng Fan <peng.fan@nxp.com>:
This patchset is a pick up of patch 1,2 from [1]. And I also collect
Linus's R-b for patch 2. After this patchset, there is only one user of
of_gpio.h left in sound driver(pxa2xx-ac97).
of_gpio.h is deprecated, update the driver to use GPIO descriptors.
Patch 1 is to drop legacy platform data which in-tree no users are using it
Patch 2 is to convert to GPIO descriptors
Checking the DTS that use the device, all are using GPIOD_ACTIVE_LOW
polarity for reset-gpios, so all should work as expected with this patch.
[1] https://lore.kernel.org/all/20250408-asoc-gpio-v1-0-c0db9d3fd6e9@nxp.com/
This patch add acpi matching support for the rt1320 left and right
amplifiers on soundwire link 1 and 2, and the rt714 dmic on
soundwire link 0.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250708080030.1257790-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for rt721 on Soundwire Link 0.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250708080030.1257790-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding HDMI-In capture via I2S feature support in PTL platform.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250708080030.1257790-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding ES83x6 I2S codec support for PTL platforms and entry in match table.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250708080030.1257790-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Matches should go from more specific to less specific, correct the
ordering of two cs42l43 entries.
Fixes: c052406765 ("ASoC: Intel: soc-acpi: arl: Add match entries for new cs42l43 laptops")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250626141841.77780-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is better to print out the non supported num_dmics than printing that
it is not matching with 2 or 4.
Fixes: 2fbeff3338 ("ASoC: Intel: add sof_sdw_get_tplg_files ops")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250619104705.26057-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Stefan Binding <sbinding@opensource.cirrus.com>:
This adds support to the Intel machine drivers for CS35L63 codecs using
soundwire, and also adds match entries for the CDB35L63-CB2 on MTL
systems.
This adds a match entry for using all the amps on a CDB35L63-CB2 board
without the CS42L43 codec. Configuration is:
SDW3: 1x CS35L63 (OUT1)
SDW1: 1x CS35L63 (OUT2)
Speaker playback and amp feedback are aggregated.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250516152107.210994-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for the rt712_vb multi-function codec and
rt1320 amplifier. Both devices are connected via a single Soundwire link 3,
sharing the sdw3-clock, sdw3-data[0] and sdw3-data[1] data lanes
respectively.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250507122649.153579-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The variable name contains duplications;thus, remove the redundant strings.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250507122649.153579-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check subset of link mask when matching the machine driver,
rule is superset match should be ordered before subset matches.
Priority: mockup > most links > most bit link-mask > alphabetical
Reorder acpi_link_adr & sdw_machine tables per defined criteria:
1.Mock Test 1st
2.Most links 1st
3.link_mask with more bit first
4.link_number number order
5.Alphabetical order
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250506014930.5408-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
