Simplify the code to manage the firmware loading with __free(firmware)
auto-cleanup.
Only the code refactoring, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260806140006.1412298-6-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for mutex locks.
Merely code refactoring, and no behavior change.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260708125002.202515-10-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The firmware container allocations passed cont->size + sizeof(int) to
kzalloc(), which was wrong: the struct contains an int len followed by a
u8 data[] flexible array. It ended up being the same as the struct's
size is only the int member but still wrong.
Use the modern struct_size helper for this.
Add __counted_by for extra runtime analysis.
Assisted-by: Claude:Opus-4.7
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260523011749.101555-1-rosenp@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com> says:
This series is a preparation for
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 23ff24080dfd..aebd3a5e90af 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -477,7 +477,11 @@ struct rpmsg_device_id {
struct i2c_device_id {
char name[I2C_NAME_SIZE];
- kernel_ulong_t driver_data; /* Data private to the driver */
+ union {
+ /* Data private to the driver */
+ kernel_ulong_t driver_data;
+ const void *driver_data_ptr;
+ };
};
/* pci_epf */
and this requires that .driver_data is assigned via a named initializer
for static data. This requirement isn't a bad one because named
initializers are also much better readable than list initializers.
The union added to struct i2c_device_id enables further cleanups like:
diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
index 8a082ff034dd..b2aac7348d22 100644
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -1429,7 +1429,7 @@ static int kxcjk1013_probe(struct i2c_client *client)
if (id) {
name = id->name;
- data->info = (const struct kx_chipset_info *)(id->driver_data);
+ data->info = id->driver_data_ptr;
} else {
name = iio_get_acpi_device_name_and_data(&client->dev, &ddata);
data->info = ddata;
@@ -1630,11 +1630,11 @@ static const struct dev_pm_ops kxcjk1013_pm_ops = {
};
static const struct i2c_device_id kxcjk1013_id[] = {
- { .name = "kxcjk1013", .driver_data = (kernel_ulong_t)&kxcjk1013_info },
- { .name = "kxcj91008", .driver_data = (kernel_ulong_t)&kxcj91008_info },
- { .name = "kxtj21009", .driver_data = (kernel_ulong_t)&kxtj21009_info },
- { .name = "kxtf9", .driver_data = (kernel_ulong_t)&kxtf9_info },
- { .name = "kx023-1025", .driver_data = (kernel_ulong_t)&kx0231025_info },
+ { .name = "kxcjk1013", .driver_data_ptr = &kxcjk1013_info },
+ { .name = "kxcj91008", .driver_data_ptr = &kxcj91008_info },
+ { .name = "kxtj21009", .driver_data_ptr = &kxtj21009_info },
+ { .name = "kxtf9", .driver_data_ptr = &kxtf9_info },
+ { .name = "kx023-1025", .driver_data_ptr = &kx0231025_info },
{ }
};
MODULE_DEVICE_TABLE(i2c, kxcjk1013_id);
that are an improvement for readability (again!) and it keeps some
properties of the pointers (here: being const) without having to pay
attention for that. (I didn't find a good example in sound/soc, so an
iio driver was used to demonstrate the gain.)
My additional motivation for this effort is CHERI[1]. This is a hardware
extension that uses 128 bit pointers but unsigned long is still 64 bit.
So with CHERI you cannot store pointers in unsigned long variables.
The first patch drops a few empty remove callbacks that I found while
working on patch #2. The second converts all hwmon drivers to use named
initializers.
Link: https://patch.msgid.link/cover.1778692164.git.u.kleine-koenig@baylibre.com
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify indention and usage of commas.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/ae2ff4898eb340bd8bcafb7b75443eb4a0ce3e76.1778692164.git.u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In aw88395_i2c_probe(), if `devm_gpiod_get_optional()` fails, it returns
an ERR_PTR() error pointer. The current code only prints a message and
continues execution, leaving `aw88395->reset_gpio` as an invalid pointer.
Later, in `aw88395_hw_reset()`, this invalid pointer is passed to
`gpiod_set_value_cansleep()`, which dereferences it and causes a kernel
panic.
For optional GPIOs, `devm_gpiod_get_optional()` returns NULL if the GPIO
is not defined in the DT, which is safe. If it returns an ERR_PTR, it
means a real error occurred (e.g., -EPROBE_DEFER) and the probe must be
aborted.
Also, since the GPIO is optional, remove the dev_err() log in
aw88395_hw_reset() when the GPIO is missing to match the optional
semantics. This also fixes a potential NULL pointer dereference as
aw_pa is not initialized when aw88395_hw_reset() is called.
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Link: https://patch.msgid.link/20260428023408.46420-1-wangdich9700@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Modify the dsp read and write functions of the chip and normalize
the dsp read and write functions of all awinic amplifier
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://patch.msgid.link/20251128130323.628091-1-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
We would like to hide struct snd_soc_dapm_context from driver. So we need
cleanup code first. Current ASoC have very similar functions (A)(B).
(A) snd_soc_kcontrol_component()
(B) snd_soc_dapm_kcontrol_component()
(B) is using very picky way to get component but using it is necessary in
ASoC. But (A) is just wrapper function to snd_kcontrol_chip(), and directly
using it without wrapper is very common way on ALSA.
This patch-set doesn't merge patches for each vender etc, because it makes
backport difficult.
We have very similar name functions (A)(B). Both gets component from
snd_kcontrol, but (A) is used in callback functions which is registered
through snd_soc_add_component_controls(), (B) is used through
snd_soc_dapm_new_widgets().
(A) snd_soc_kcontrol_component()
(B) snd_soc_dapm_kcontrol_component()
(B) is using very picky way to get component but using it is necessary in
ASoC. But (A) is just wrapper function to snd_kcontrol_chip(), and directly
using it without wrapper is very common way on ALSA.
To reduce confusions of similar function, let's use common way on (A).
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87bjmat8qk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_wq is a per-CPU worqueue, replaced by system_percpu_wq. Despite that,
system_wq in this change has been replaced by system_dfl_wq, because there
aren't per-cpu variables.
The old wq will be kept for a few release cylces.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20250929155053.400342-2-marco.crivellari@suse.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In aw8xxxx_profile_info(), strscpy() is called with the length of the
source string "null" rather than the size of the destination buffer.
This is fine as long as the destination buffer is larger than the source
string, but we should still use the destination buffer size instead to
call strscpy() as intended. And since 'name' points to the fixed-size
buffer 'uinfo->value.enumerated.name', we can safely omit the size
argument and let strscpy() infer it using sizeof() and remove 'name'.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250810214144.1985-2-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
Add calibration functionality to the aw88399 chip.
When the chip is in calibration condition, calibration
can be achieved by configuring the chip's internal DSP
and save the calibration values in cali_re.
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://patch.msgid.link/20250627110306.23488-1-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use min() to simplify aw_dev_dsp_update_container() and improve its
readability.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250429071032.65391-2-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
For historical reasons, the Castagnoli CRC32 is available under 3 names:
crc32c(), crc32c_le(), and __crc32c_le(). Most callers use crc32c().
The more verbose versions are not really warranted; there is no "_be"
version that the "_le" version needs to be differentiated from, and the
leading underscores are pointless.
Therefore, let's standardize on just crc32c(). Remove the other two
names, and update callers accordingly.
Specifically, the new crc32c() comes from what was previously
__crc32c_le(), so compared to the old crc32c() it now takes a size_t
length rather than unsigned int, and it's now in linux/crc32.h instead
of just linux/crc32c.h (which includes linux/crc32.h).
Later patches will also rename __crc32c_le_combine(), crc32c_le_base(),
and crc32c_le_arch().
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250208024911.14936-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Allocate memory, which is being freed at end of the scope, with
scoped/cleanup.h to reduce number of error paths and make code a bit
simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240701171917.596173-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20240624131728.1244053-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it directly, replace it
with what is really being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240605221446.2624964-5-andriy.shevchenko@linux.intel.com
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Modify the aw88395_lib file so that the bin file
parsing is no longer related to the chip id of the chip.
Adopt the bin file data type "prof_data_type" as the
differentiation between different chip bin file
parsing methods.
Since the chip id macro for the aw88399 is no longer
defined in aw88395_reg.h, define the chip id
for the aw88399 in aw88399.h
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20231109093708.13155-1-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add aw88399 compatible code to the aw88395_lib.c file
so that it can parse aw88399's bin file.
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20231025112625.959587-3-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the transmission mode of the "aw88395_dev_get_prof_name"
function parameter, Instead of using return values for data
transfer, parameters are used
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20230928105727.47273-6-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename "sound-channel" to "awinic,audio-channel",
this is to be consistent with the "awinic,aw88395.yaml" file
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20230928105727.47273-5-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de
Link: https://lore.kernel.org/r/20230425095716.331419-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org
Change the function name aw88395_plack_event to aw88395_playback_event
Signed-off-by: Ben Yi <yijiangtao@awinic.com>
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20230213093649.22928-2-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck reports
sound/soc/codecs/aw88395/aw88395_lib.c:789:6: error: Uninitialized variable: cur_scene_id [uninitvar]
if (cur_scene_id == 0) {
^
Passing a garbage value to aw_dev_parse_data_by_sec_type_v1() will cause a crash
when the value is used as an array index. This check assumes cur_scene_id is
initialized to 0, so initialize it to 0.
Fixes: 4345865b00 ("ASoC: codecs: ACF bin parsing and check library file for aw88395")
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230205015733.1721009-1-trix@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Awinic AW88395 is an I2S/TDM input, high efficiency
digital Smart K audio amplifier with an integrated 10.25V
smart boost convert
Signed-off-by: Nick Li <liweilei@awinic.com>
Signed-off-by: Bruce zhao <zhaolei@awinic.com>
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20230113055301.189541-5-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Awinic AW88395 is an I2S/TDM input, high efficiency
digital Smart K audio amplifier with an integrated 10.25V
smart boost convert
Signed-off-by: Nick Li <liweilei@awinic.com>
Signed-off-by: Bruce zhao <zhaolei@awinic.com>
Signed-off-by: Ben Yi <yijiangtao@awinic.com>
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20230113055301.189541-4-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Awinic AW88395 is an I2S/TDM input, high efficiency
digital Smart K audio amplifier with an integrated 10.25V
smart boost convert
Signed-off-by: Nick Li <liweilei@awinic.com>
Signed-off-by: Bruce zhao <zhaolei@awinic.com>
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20230113055301.189541-3-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Awinic AW88395 is an I2S/TDM input, high efficiency
digital Smart K audio amplifier with an integrated 10.25V
smart boost convert
Signed-off-by: Nick Li <liweilei@awinic.com>
Signed-off-by: Bruce zhao <zhaolei@awinic.com>
Signed-off-by: Weidong Wang <wangweidong.a@awinic.com>
Link: https://lore.kernel.org/r/20230113055301.189541-2-wangweidong.a@awinic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
