Currently the runtime.oss.trigger field may be accessed concurrently
without protection, which may lead to the data race. And, in this
case, it may lead to more severe problem because it's a bit field; as
writing the data, it may overwrite other bit fields as well, which
confuses the operation completely, as spotted by fuzzing.
Fix it by covering runtime.oss.trigger bit fled also with the existing
params_lock mutex in both snd_pcm_oss_get_trigger() and
snd_pcm_oss_poll().
Reported-and-tested-by: Jaeyoung Chung <jjy600901@snu.ac.kr>
Closes: https://lore.kernel.org/20260423145330.210035-1-jjy600901@snu.ac.kr
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20260424112205.123703-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
__snd_pcm_set_state() writes runtime->state under the PCM stream lock.
However, the OSS I/O functions snd_pcm_oss_write3(), snd_pcm_oss_read3(),
snd_pcm_oss_writev3() and snd_pcm_oss_readv3() read runtime->state
without holding the stream lock, only holding oss.params_lock (a
different mutex that does not synchronize with the stream lock).
Since __snd_pcm_set_state() is called from IRQ context (e.g.,
snd_pcm_period_elapsed -> snd_pcm_update_state -> __snd_pcm_xrun ->
snd_pcm_stop -> snd_pcm_post_stop) while the OSS read/write paths
run in process context, these are concurrent accesses that constitute
a data race.
Rather than using READ_ONCE()/WRITE_ONCE() barriers, introduce a
snd_pcm_get_state() helper that reads runtime->state under the stream
lock, matching the locking discipline used elsewhere in the PCM layer.
Also export snd_pcm_set_state() for completeness.
Use snd_pcm_get_state() in all four OSS I/O functions, caching the
result in a local variable where the same snapshot is used for
multiple comparisons to avoid taking the lock repeatedly.
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Link: https://patch.msgid.link/20260316085047.2876451-1-zzzccc427@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Add an SPDX id of LGPL-2.0+ to files in the
sound core sub-system that are missing ids. Remove
boilerplate text.
These files were originally submitted in a big commit
for the ALSA sound system for kernel version 2.5.4,
by Jaroslav Kysela, in Feb 2002.
Signed-off-by: Tim Bird <tim.bird@sony.com>
Link: https://patch.msgid.link/20260212183103.3720788-1-tim.bird@sony.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA OSS mixer layer calls the kcontrol ops rather individually, and
pending calls might be not always caught at disconnecting the device.
For avoiding the potential UAF scenarios, add sanity checks of the
card disconnection at each entry point of OSS mixer accesses. The
rwsem is taken just before that check, hence the rest context should
be covered by that properly.
Link: https://patch.msgid.link/20260209121212.171430-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
No need to assign "uctl" to itself. Delete it.
Fixes: 55f98ece99 ("ALSA: oss: Relax __free() variable declarations")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aYXvm2YoV2yRimhk@stanley.mountain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We used to have a variable declaration with __free() initialized with
NULL. This was to keep the old coding style rule, but recently it's
relaxed and rather recommends to follow the new rule to declare in
place of use for __free() -- which avoids potential deadlocks or UAFs
with nested cleanups.
Although the current code has no bug, per se, let's follow the new
standard and move the declaration to the place of assignment (or
directly assign the allocated result) instead of NULL initializations.
Fixes: a55bc334d3 ("ALSA: pcm_oss: ump: Use automatic cleanup of kfree()")
Fixes: 6c40eec521 ("ALSA: mixer_oss: ump: Use automatic cleanup of kfree()")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251216140634.171890-5-tiwai@suse.de
The PCM OSS layer tries to clear the buffer with the silence data at
initialization (or reconfiguration) of a stream with the explicit call
of snd_pcm_format_set_silence() with runtime->dma_area. But this may
lead to a UAF because the accessed runtime->dma_area might be freed
concurrently, as it's performed outside the PCM ops.
For avoiding it, move the code into the PCM core and perform it inside
the buffer access lock, so that it won't be changed during the
operation.
Reported-by: syzbot+32d4647f551007595173@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/68164d8e.050a0220.11da1b.0019.GAE@google.com
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250516080817.20068-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmb9kbIACgkQJNaLcl1U
h9DoEAf/YFyHf5UchliSj11taVVDxzIZznDVfJdhxw6Iktj7b7SinUNRvGfixXyV
ELbRDP291/Cx0AuoRTbj+wZpO687uLVdTAUfX9OEXIOku0kRCA0XZOyAe+tgtKgr
rCIaj9sCn6CxYWBw4VBDcP4tgvh2igcYKeO2bUvvukHdTJBYTiUxrcJCkVDBQr4t
bzvdlalukcop3yMPZbf41CGf7T0tfh8KkJaNbdnhQLoKD3rekYsShZYmH1wRmCQc
fnwWuOgoREIilPLbae7fhdFmH1EscIt4iZcq8j+tl1Kvj1zKabU0We4Rx2rfWZ/Y
pd+YwxRnrXNI2+hUG6nXAVtYjPRa/A==
=KM7g
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.12
A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.
"assigned" and "assigned->name" are allocated in snd_mixer_oss_proc_write()
using kmalloc() and kstrdup(), so there is no point in using kfree_const()
to free these resources.
Switch to the more standard kfree() to free these resources.
This could avoid a memory leak.
Fixes: 454f5ec1d2 ("ALSA: mixer: oss: Constify snd_mixer_oss_assign_table definition")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/63ac20f64234b7c9ea87a7fa9baf41e8255852f7.1727374631.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fixes typos in comments within the ALSA subsystem.
These changes improve code readability without affecting
functionality.
Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
Link: https://patch.msgid.link/20240924041749.3125507-1-yujiaoliang@vivo.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For a fast look-up of a control element via either numid or name
matching (enabled via CONFIG_SND_CTL_FAST_LOOKUP), a locking isn't
needed at all thanks to Xarray. OTOH, the locking is still needed for
a slow linked-list traversal, and that's rather a rare case.
In this patch, we reduce the use of locking at snd_ctl_find_*() API
functions, and switch from controls_rwsem to controls_rwlock for
avoiding unnecessary lock inversions. This also resulted in a nice
cleanup, as *_unlocked() version of snd_ctl_find_*() APIs can be
dropped.
snd_ctl_find_id_mixer_unlocked() is still left just as an alias of
snd_ctl_find_id_mixer(), since soc-card.c has a wrapper and there are
several users. Once after converting there, we can remove it later.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240809104234.8488-3-tiwai@suse.de
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240507135513.14919-2-tiwai@suse.de
The setup_mutex in PCM oss code can be simplified with guard().
(params_lock is tough and not trivial to covert, though.)
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-24-tiwai@suse.de
Define guard() usage for PCM stream locking and use it in appropriate
places.
The pair of snd_pcm_stream_lock() and snd_pcm_stream_unlock() can be
presented with guard(pcm_stream_lock) now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-23-tiwai@suse.de
We can simplify the code gracefully with new guard() macro and co for
automatic cleanup of locks.
Only the code refactoring, and no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240227085306.9764-8-tiwai@suse.de
There are common patterns where a temporary buffer is allocated and
freed at the exit, and those can be simplified with the recent cleanup
mechanism via __free(kfree).
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240223084241.3361-5-tiwai@suse.de
There are common patterns where a temporary buffer is allocated and
freed at the exit, and those can be simplified with the recent cleanup
mechanism via __free(kfree).
No functional changes, only code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240223084241.3361-4-tiwai@suse.de
For reducing the unnecessary use of controls_rwsem in the drivers,
this patch adds a new variant for snd_ctl_find_*() helpers:
snd_ctl_find_id_locked() and snd_ctl_find_numid_locked() look for a
kctl element inside the card->controls_rwsem -- that is, doing the
very same as what snd_ctl_find_id() and snd_ctl_find_numid() did until
now. snd_ctl_find_id() and snd_ctl_find_numid() remain same,
i.e. still unlocked version, but they will be switched to locked
version once after all callers are replaced.
The patch also replaces the calls of snd_ctl_find_id() and
snd_ctl_find_numid() in a few places; all of those are places where we
know that the functions are called properly with controls_rwsem held.
All others are without rwsem (although they should have been).
After this patch, we'll turn on the locking in snd_ctl_find_id() and
snd_ctl_find_numid() to be more race-free.
Link: https://lore.kernel.org/r/20230718141304.1032-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Two functions are defined and used in pcm_oss.c but also optionally
used from io.c, with an optional prototype. If CONFIG_SND_PCM_OSS_PLUGINS
is disabled, this causes a warning as the functions are not static
and have no prototype:
sound/core/oss/pcm_oss.c:1235:19: error: no previous prototype for 'snd_pcm_oss_write3' [-Werror=missing-prototypes]
sound/core/oss/pcm_oss.c:1266:19: error: no previous prototype for 'snd_pcm_oss_read3' [-Werror=missing-prototypes]
Avoid this by making the prototypes unconditional.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516195046.550584-2-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace direct modifications to vma->vm_flags with calls to modifier
functions to be able to track flag changes and to keep vma locking
correctness.
[akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo]
Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Oskolkov <posk@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In the PCM core and driver code, there are lots place referring to the
current PCM state via runtime->status->state. This patch introduced a
local PCM state in runtime itself and replaces those references with
runtime->state. It has improvements in two aspects:
- The reduction of a indirect access leads to more code optimization
- It avoids a possible (unexpected) modification of the state via mmap
of the status record
The status->state is updated together with runtime->state, so that
user-space can still read the current state via mmap like before,
too.
This patch touches only the ALSA core code. The changes in each
driver will follow in later patches.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220926135558.26580-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a small race window at snd_pcm_oss_sync() that is called from
OSS PCM SNDCTL_DSP_SYNC ioctl; namely the function calls
snd_pcm_oss_make_ready() at first, then takes the params_lock mutex
for the rest. When the stream is set up again by another thread
between them, it leads to inconsistency, and may result in unexpected
results such as NULL dereference of OSS buffer as a fuzzer spotted
recently.
The fix is simply to cover snd_pcm_oss_make_ready() call into the same
params_lock mutex with snd_pcm_oss_make_ready_locked() variant.
Reported-and-tested-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAFcO6XN7JDM4xSXGhtusQfS2mSBcx50VJKwQpCq=WeLt57aaZA@mail.gmail.com
Link: https://lore.kernel.org/r/20220905060714.22549-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the parameter changes fails, we don't need to keep the old
temporary buffers. Release those (and plugin instances) upon errors
for reducing dead memory footprint. Since we always call it at the
exit of snd_pcm_oss_changes_params_locked(), the explicit calls of
snd_pcm_oss_plugin_clear() can be dropped, too.
Along with it, unify the buffer-free calls to a single helper and call
it from the needed places.
Link: https://lore.kernel.org/r/20220318082157.29769-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We've got syzbot reports hitting INT_MAX overflow at vmalloc()
allocation that is called from snd_pcm_plug_alloc(). Although we
apply the restrictions to input parameters, it's based only on the
hw_params of the underlying PCM device. Since the PCM OSS layer
allocates a temporary buffer for the data conversion, the size may
become unexpectedly large when more channels or higher rates is given;
in the reported case, it went over INT_MAX, hence it hits WARN_ON().
This patch is an attempt to avoid such an overflow and an allocation
for too large buffers. First off, it adds the limit of 1MB as the
upper bound for period bytes. This must be large enough for all use
cases, and we really don't want to handle a larger temporary buffer
than this size. The size check is performed at two places, where the
original period bytes is calculated and where the plugin buffer size
is calculated.
In addition, the driver uses array_size() and array3_size() for
multiplications to catch overflows for the converted period size and
buffer bytes.
Reported-by: syzbot+72732c532ac1454eeee9@syzkaller.appspotmail.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/00000000000085b1b305da5a66f3@google.com
Link: https://lore.kernel.org/r/20220318082036.29699-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A couple of calls in snd_pcm_oss_change_params_locked() ignore the
possible errors. Catch those errors and abort the operation for
avoiding further problems.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211201073606.11660-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix compile error when OSS_DEBUG is enabled:
sound/core/oss/pcm_oss.c: In function 'snd_pcm_oss_set_trigger':
sound/core/oss/pcm_oss.c:2055:10: error: 'substream' undeclared (first
use in this function); did you mean 'csubstream'?
pcm_dbg(substream->pcm, "pcm_oss: trigger = 0x%x\n", trigger);
^
Fixes: 61efcee860 ("ALSA: oss: Use standard printk helpers")
Signed-off-by: Bixuan Cui <cuibixuan@linux.alibaba.com>
Link: https://lore.kernel.org/r/1638349134-110369-1-git-send-email-cuibixuan@linux.alibaba.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are a few places doing assignments in if condition in ALSA PCM
and OSS emulation layers, which is a bad coding style that may confuse
readers and occasionally lead to bugs.
This patch is merely for coding-style fixes, no functional changes.
Link: https://lore.kernel.org/r/20210608140540.17885-56-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Building with 'make W=1' shows some warnings about empty function-style
macros:
sound/core/pcm_memory.c: In function 'preallocate_pages':
sound/core/pcm_memory.c:236:49: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
236 | preallocate_info_init(substream);
sound/core/seq_device.c: In function 'snd_seq_device_dev_register':
sound/core/seq_device.c:163:41: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
163 | queue_autoload_drivers();
Change them to empty inline functions, which are more robust here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210322103128.547199-1-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
strlcpy is deprecated. see: Documentation/process/deprecated.rst
Change the calls that do not use the strlcpy return value to the
preferred strscpy.
Done with cocci script:
@@
expression e1, e2, e3;
@@
- strlcpy(
+ strscpy(
e1, e2, e3);
This cocci script leaves the instances where the return value is
used unchanged.
After this patch, sound/ has 3 uses of strlcpy() that need to be
manually inspected for conversion and changed one day.
$ git grep -w strlcpy sound/
sound/usb/card.c: len = strlcpy(card->longname, s, sizeof(card->longname));
sound/usb/mixer.c: return strlcpy(buf, p->name, buflen);
sound/usb/mixer.c: return strlcpy(buf, p->names[index], buflen);
Miscellenea:
o Remove trailing whitespace in conversion of sound/core/hwdep.c
Link: https://lore.kernel.org/lkml/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/22b393d1790bb268769d0bab7bacf0866dcb0c14.camel@perches.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use DIV_ROUND_CLOSEST() instead of open-coding it. This documents intent
and makes it more clear what is going on for the casual reviewer.
Generated using the following the Coccinelle semantic patch.
// <smpl>
@@
expression x, y;
@@
-((x) + ((y) / 2)) / (y)
+DIV_ROUND_CLOSEST(x, y)
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20201223172229.781-13-lars@metafoo.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are a few places that call round{up|down}_pow_of_two() with the
value zero, and this causes undefined behavior warnings. Avoid
calling those macros if such a nonsense value is passed; it's a minor
optimization as well, as we handle it as either an error or a value to
be skipped, instead.
Reported-by: syzbot+33ef0b6639a8d2d42b4c@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201218161730.26596-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
syzbot spotted a potential out-of-bounds shift in the PCM OSS layer
where it calculates the buffer size with the arbitrary shift value
given via an ioctl.
Add a range check for avoiding the undefined behavior.
As the value can be treated by a signed integer, the max shift should
be 30.
Reported-by: syzbot+df7dc146ebdd6435eea3@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201209084552.17109-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The PCM OSS mulaw plugin has a check of the format of the counter part
whether it's a linear format. The check is with snd_BUG_ON() that
emits WARN_ON() when the debug config is set, and it confuses
syzkaller as if it were a serious issue. Let's drop snd_BUG_ON() for
avoiding that.
While we're at it, correct the error code to a more suitable, EINVAL.
Reported-by: syzbot+23b22dc2e0b81cbfcc95@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200901131802.18157-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
