mirror of
https://github.com/torvalds/linux.git
synced 2026-05-12 16:18:45 +02:00
master
600 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
91a4855d6c |
Networking changes for 7.1.
Core & protocols
----------------
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP.
- Number of code moves to help the compiler with inlining.
Avoid output arguments for returning drop reason where possible.
- Rework drop handling within qdiscs to include more metadata
about the reason and dropping qdisc in the tracepoints.
- Remove the rtnl_lock use from IP Multicast Routing.
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two.
- Report TCP delayed ack timer information via socket diag.
- Add ip_local_port_step_width sysctl to allow distributing the randomly
selected ports more evenly throughout the allowed space.
- Add support for per-route tunsrc in IPv6 segment routing.
- Start work of switching sockopt handling to iov_iter.
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up.
- Support MSG_EOR in MPTCP.
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage.
- Remove UDP-Lite support (as announced in 2023).
- Remove support for building IPv6 as a module.
Remove the now unnecessary function calling indirection.
Cross-tree stuff
----------------
- Move Michael MIC code from generic crypto into wireless,
it's considered insecure but some WiFi networks still need it.
Netfilter
---------
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate.
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex.
- Add more opinionated input validation to lower security exposure.
- Make IPVS hash tables to be per-netns and resizable.
Wireless
--------
- Finished assoc frame encryption/EPPKE/802.1X-over-auth.
- Radar detection improvements.
- Add 6 GHz incumbent signal detection APIs.
- Multi-link support for FILS, probe response templates and
client probing.
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware.
Driver API
----------
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs.
- Add standard counters for reporting pause storm events
(implement in mlx5 and fbnic).
- Add configuration API for completion writeback buffering
(implement in mana).
- Support driver-initiated change of RSS context sizes.
- Support DPLL monitoring input frequency (implement in zl3073x).
- Support per-port resources in devlink (implement in mlx5).
Misc
----
- Expand the YAML spec for Netfilter.
Drivers
-------
- Software:
- macvlan: support multicast rx for bridge ports with shared source
MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EhQZ
-----END PGP SIGNATURE-----
Merge tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
Wireless:
- Finished assoc frame encryption/EPPKE/802.1X-over-auth
- Radar detection improvements
- Add 6 GHz incumbent signal detection APIs
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
|
||
|
Kuniyuki Iwashima
|
b972cb5d39 |
smack: Remove IPPROTO_UDPLITE support in security_sock_rcv_skb().
smack_socket_sock_rcv_skb() is registered as socket_sock_rcv_skb, which is called as security_sock_rcv_skb() in sk_filter_trim_cap(). Now that UDP-Lite is gone, let's remove the IPPROTO_UDPLITE support in smack_socket_sock_rcv_skb(). Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Link: https://patch.msgid.link/20260311052020.1213705-7-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jeff Layton
|
0b2600f81c
|
treewide: change inode->i_ino from unsigned long to u64
On 32-bit architectures, unsigned long is only 32 bits wide, which causes 64-bit inode numbers to be silently truncated. Several filesystems (NFS, XFS, BTRFS, etc.) can generate inode numbers that exceed 32 bits, and this truncation can lead to inode number collisions and other subtle bugs on 32-bit systems. Change the type of inode->i_ino from unsigned long to u64 to ensure that inode numbers are always represented as 64-bit values regardless of architecture. Update all format specifiers treewide from %lu/%lx to %llu/%llx to match the new type, along with corresponding local variable types. This is the bulk treewide conversion. Earlier patches in this series handled trace events separately to allow trace field reordering for better struct packing on 32-bit. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://patch.msgid.link/20260304-iino-u64-v3-12-2257ad83d372@kernel.org Acked-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Linus Torvalds
|
bf4afc53b7 |
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Kees Cook
|
69050f8d6d |
treewide: Replace kmalloc with kmalloc_obj for non-scalar types
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
Konstantin Andreev
|
33d589ed60 |
smack: /smack/doi: accept previously used values
Writing to /smack/doi a value that has ever been
written there in the past disables networking for
non-ambient labels.
E.g.
# cat /smack/doi
3
# netlabelctl -p cipso list
Configured CIPSO mappings (1)
DOI value : 3
mapping type : PASS_THROUGH
# netlabelctl -p map list
Configured NetLabel domain mappings (3)
domain: "_" (IPv4)
protocol: UNLABELED
domain: DEFAULT (IPv4)
protocol: CIPSO, DOI = 3
domain: DEFAULT (IPv6)
protocol: UNLABELED
# cat /smack/ambient
_
# cat /proc/$$/attr/smack/current
_
# ping -c1 10.1.95.12
64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.964 ms
# echo foo >/proc/$$/attr/smack/current
# ping -c1 10.1.95.12
64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.956 ms
unknown option 86
# echo 4 >/smack/doi
# echo 3 >/smack/doi
!> [ 214.050395] smk_cipso_doi:691 cipso add rc = -17
# echo 3 >/smack/doi
!> [ 249.402261] smk_cipso_doi:678 remove rc = -2
!> [ 249.402261] smk_cipso_doi:691 cipso add rc = -17
# ping -c1 10.1.95.12
!!> ping: 10.1.95.12: Address family for hostname not supported
# echo _ >/proc/$$/attr/smack/current
# ping -c1 10.1.95.12
64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.617 ms
This happens because Smack keeps decommissioned DOIs,
fails to re-add them, and consequently refuses to add
the “default” domain map:
# netlabelctl -p cipso list
Configured CIPSO mappings (2)
DOI value : 3
mapping type : PASS_THROUGH
DOI value : 4
mapping type : PASS_THROUGH
# netlabelctl -p map list
Configured NetLabel domain mappings (2)
domain: "_" (IPv4)
protocol: UNLABELED
!> (no ipv4 map for default domain here)
domain: DEFAULT (IPv6)
protocol: UNLABELED
Fix by clearing decommissioned DOI definitions and
serializing concurrent DOI updates with a new lock.
Also:
- allow /smack/doi to live unconfigured, since
adding a map (netlbl_cfg_cipsov4_map_add) may fail.
CIPSO_V4_DOI_UNKNOWN(0) indicates the unconfigured DOI
- add new DOI before removing the old default map,
so the old map remains if the add fails
(2008-02-04, Casey Schaufler)
Fixes:
|
||
|
Konstantin Andreev
|
19c013e155 |
smack: /smack/doi must be > 0
/smack/doi allows writing and keeping negative doi values.
Correct values are 0 < doi <= (max 32-bit positive integer)
(2008-02-04, Casey Schaufler)
Fixes:
|
||
|
Taimoor Zaeem
|
e877cbb453 |
security: smack: fix indentation in smack_access.c
Replace spaces in code indent with tab character. Signed-off-by: Taimoor Zaeem <taimoorzaeem@gmail.com> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> |
||
|
Linus Torvalds
|
7cd122b552 |
Some filesystems use a kinda-sorta controlled dentry refcount leak to pin
dentries of created objects in dcache (and undo it when removing those).
Reference is grabbed and not released, but it's not actually _stored_
anywhere. That works, but it's hard to follow and verify; among other
things, we have no way to tell _which_ of the increments is intended
to be an unpaired one. Worse, on removal we need to decide whether
the reference had already been dropped, which can be non-trivial if
that removal is on umount and we need to figure out if this dentry is
pinned due to e.g. unlink() not done. Usually that is handled by using
kill_litter_super() as ->kill_sb(), but there are open-coded special
cases of the same (consider e.g. /proc/self).
Things get simpler if we introduce a new dentry flag (DCACHE_PERSISTENT)
marking those "leaked" dentries. Having it set claims responsibility
for +1 in refcount.
The end result this series is aiming for:
* get these unbalanced dget() and dput() replaced with new primitives that
would, in addition to adjusting refcount, set and clear persistency flag.
* instead of having kill_litter_super() mess with removing the remaining
"leaked" references (e.g. for all tmpfs files that hadn't been removed
prior to umount), have the regular shrink_dcache_for_umount() strip
DCACHE_PERSISTENT of all dentries, dropping the corresponding
reference if it had been set. After that kill_litter_super() becomes
an equivalent of kill_anon_super().
Doing that in a single step is not feasible - it would affect too many places
in too many filesystems. It has to be split into a series.
This work has really started early in 2024; quite a few preliminary pieces
have already gone into mainline. This chunk is finally getting to the
meat of that stuff - infrastructure and most of the conversions to it.
Some pieces are still sitting in the local branches, but the bulk of
that stuff is here.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCaTEq1wAKCRBZ7Krx/gZQ
643uAQC1rRslhw5l7OjxEpIYbGG4M+QaadN4Nf5Sr2SuTRaPJQD/W4oj/u4C2eCw
Dd3q071tqyvm/PXNgN2EEnIaxlFUlwc=
=rKq+
-----END PGP SIGNATURE-----
Merge tag 'pull-persistency' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull persistent dentry infrastructure and conversion from Al Viro:
"Some filesystems use a kinda-sorta controlled dentry refcount leak to
pin dentries of created objects in dcache (and undo it when removing
those). A reference is grabbed and not released, but it's not actually
_stored_ anywhere.
That works, but it's hard to follow and verify; among other things, we
have no way to tell _which_ of the increments is intended to be an
unpaired one. Worse, on removal we need to decide whether the
reference had already been dropped, which can be non-trivial if that
removal is on umount and we need to figure out if this dentry is
pinned due to e.g. unlink() not done. Usually that is handled by using
kill_litter_super() as ->kill_sb(), but there are open-coded special
cases of the same (consider e.g. /proc/self).
Things get simpler if we introduce a new dentry flag
(DCACHE_PERSISTENT) marking those "leaked" dentries. Having it set
claims responsibility for +1 in refcount.
The end result this series is aiming for:
- get these unbalanced dget() and dput() replaced with new primitives
that would, in addition to adjusting refcount, set and clear
persistency flag.
- instead of having kill_litter_super() mess with removing the
remaining "leaked" references (e.g. for all tmpfs files that hadn't
been removed prior to umount), have the regular
shrink_dcache_for_umount() strip DCACHE_PERSISTENT of all dentries,
dropping the corresponding reference if it had been set. After that
kill_litter_super() becomes an equivalent of kill_anon_super().
Doing that in a single step is not feasible - it would affect too many
places in too many filesystems. It has to be split into a series.
This work has really started early in 2024; quite a few preliminary
pieces have already gone into mainline. This chunk is finally getting
to the meat of that stuff - infrastructure and most of the conversions
to it.
Some pieces are still sitting in the local branches, but the bulk of
that stuff is here"
* tag 'pull-persistency' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
d_make_discardable(): warn if given a non-persistent dentry
kill securityfs_recursive_remove()
convert securityfs
get rid of kill_litter_super()
convert rust_binderfs
convert nfsctl
convert rpc_pipefs
convert hypfs
hypfs: swich hypfs_create_u64() to returning int
hypfs: switch hypfs_create_str() to returning int
hypfs: don't pin dentries twice
convert gadgetfs
gadgetfs: switch to simple_remove_by_name()
convert functionfs
functionfs: switch to simple_remove_by_name()
functionfs: fix the open/removal races
functionfs: need to cancel ->reset_work in ->kill_sb()
functionfs: don't bother with ffs->ref in ffs_data_{opened,closed}()
functionfs: don't abuse ffs_data_closed() on fs shutdown
convert selinuxfs
...
|
||
|
Linus Torvalds
|
204a920f28 |
Patches for 6.19
-----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEC+9tH1YyUwIQzUIeOKUVfIxDyBEFAmkp4M4XHGNhc2V5QHNj aGF1Zmxlci1jYS5jb20ACgkQOKUVfIxDyBFc+BAAq564RJ19Nj7WxV3juDGYLyWR b2P2w4euHo1PvWng058G3WnCzzS14xj6xShLJL711jbuue40lngBqllP+djHIdGM /Mq4I7BnVSJ4z2svvovebiQLoaCiSHN4Uo/b8cdYRz6scueyOQdJUXZvyLwVb4fY CxzfXbcXzsS8MEZikSqyVrjdEZ8yLKzL+uJEqm9FU/suaTUuMNeXudZaXHv5sa8H wxd5iFQhNe2NYCN0EV8Pz57q36ewvzC6UhZLIM+NlIXorfBFWEq54pYpa9OOnNNW 4S+e4KWcNqcWtjxJbzh80Fyui3xv2/b1S73/0Akcf+yqp1mZjPLKZtmsFn83F9b3 SxXGqHNUIZ79U6f656nDYSYYuXzAKkqzmGC94aj7AjABBXNRejPASXqsLLAtm+KY qwqcM2W6WwG1ILEixj5UpfC7qpsBVPYGf5cOi9iPlZD2+/l7OgPOTxNDAe7M5m+E M30eJCqObdl1Uw7QlHvMG5VQT9XkwJFL93OEOADqvE1GqTphIwMb4vJmGuYe/Sgg xqEWMLA6hKBP/B8eQvA7d02WLvzvegwB7C5RTWv1M+QGyzlNxTwqOv+vecm//IVS A3LzfxjadSYyRm9nNbZrYWqdVpvYhVcxHrLwzJ4jBsPjBSZM9QlbJHaCjs/T9Sg5 pK0p5GsXIr3akV2BIvE= =n/1b -----END PGP SIGNATURE----- Merge tag 'Smack-for-6.19' of https://github.com/cschaufler/smack-next Pull smack updates from Casey Schaufler: - fix several cases where labels were treated inconsistently when imported from user space - clean up the assignment of extended attributes - documentation improvements * tag 'Smack-for-6.19' of https://github.com/cschaufler/smack-next: Smack: function parameter 'gfp' not described smack: fix kernel-doc warnings for smk_import_valid_label() smack: fix bug: setting task label silently ignores input garbage smack: fix bug: unprivileged task can create labels smack: fix bug: invalid label of unix socket file smack: always "instantiate" inode in smack_inode_init_security() smack: deduplicate xattr setting in smack_inode_init_security() smack: fix bug: SMACK64TRANSMUTE set on non-directory smack: deduplicate "does access rule request transmutation" |
||
|
Al Viro
|
bdd80b5c1b |
convert smackfs
Entirely static tree populated by simple_fill_super(). Can use kill_anon_super() as-is. Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
|
Casey Schaufler
|
29c701f90b |
Smack: function parameter 'gfp' not described
Add a descrition of the gfp parameter to smk_import_allocated_label(). Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202511061746.dPegBnNf-lkp@intel.com/ |
||
|
Paul Moore
|
06643d5584 |
smack: move initcalls to the LSM framework
As the LSM framework only supports one LSM initcall callback for each initcall type, the init_smk_fs() and smack_nf_ip_init() functions were wrapped with a new function, smack_initcall() that is registered with the LSM framework. Acked-by: Casey Schaufler <casey@schaufler-ca.com> Reviewed-by: John Johansen <john.johhansen@canonical.com> Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Paul Moore
|
9f9dc69e06 |
lsm: replace the name field with a pointer to the lsm_id struct
Reduce the duplication between the lsm_id struct and the DEFINE_LSM() definition by linking the lsm_id struct directly into the individual LSM's DEFINE_LSM() instance. Linking the lsm_id into the LSM definition also allows us to simplify the security_add_hooks() function by removing the code which populates the lsm_idlist[] array and moving it into the normal LSM startup code where the LSM list is parsed and the individual LSMs are enabled, making for a cleaner implementation with less overhead at boot. Reviewed-by: Kees Cook <kees@kernel.org> Reviewed-by: John Johansen <john.johansen@canonical.com> Reviewed-by: Casey Schaufler <casey@schaufler-ca.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Linus Torvalds
|
33fc69a05c |
Simplifying ->d_name audits, easy part.
Turn dentry->d_name into an anon union of const struct qsrt (d_name
itself) and a writable alias (__d_name). With constification of some
struct qstr * arguments of functions that get &dentry->d_name passed
to them, that ends up with all modifications provably done only in
fs/dcache.c (and a fairly small part of it).
Any new places doing modifications will be easy to find - grep for
__d_name will suffice.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCaNh6XAAKCRBZ7Krx/gZQ
6wIFAP9nJ9RIsTq2eiqb3YUTQsaFZNu7aqFWiHCFPeHVLzylPwEAgeoGrGdL8zNO
JqAuPPbQxN6Q6n79qAI/vfFvYQCsAQ0=
=88fF
-----END PGP SIGNATURE-----
Merge tag 'pull-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull d_name audit update from Al Viro:
"Simplifying ->d_name audits, easy part.
Turn dentry->d_name into an anon union of const struct qsrt (d_name
itself) and a writable alias (__d_name).
With constification of some struct qstr * arguments of functions that
get &dentry->d_name passed to them, that ends up with all
modifications provably done only in fs/dcache.c (and a fairly small
part of it).
Any new places doing modifications will be easy to find - grep for
__d_name will suffice"
* tag 'pull-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make it easier to catch those who try to modify ->d_name
generic_ci_validate_strict_name(): constify name argument
afs_dir_search: constify qstr argument
afs_edit_dir_{add,remove}(): constify qstr argument
exfat_find(): constify qstr argument
security_dentry_init_security(): constify qstr argument
|
||
|
Al Viro
|
f9fadf23c7 |
security_dentry_init_security(): constify qstr argument
Nothing outside of fs/dcache.c has any business modifying dentry names; passing &dentry->d_name as an argument should have that argument declared as a const pointer. Acked-by: Casey Schaufler <casey@schaufler-ca.com> # smack part Acked-by: Paul Moore <paul@paul-moore.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
|
Casey Schaufler
|
0ffbc876d0 |
audit: add record for multiple object contexts
Create a new audit record AUDIT_MAC_OBJ_CONTEXTS.
An example of the MAC_OBJ_CONTEXTS record is:
type=MAC_OBJ_CONTEXTS
msg=audit(1601152467.009:1050):
obj_selinux=unconfined_u:object_r:user_home_t:s0
When an audit event includes a AUDIT_MAC_OBJ_CONTEXTS record
the "obj=" field in other records in the event will be "obj=?".
An AUDIT_MAC_OBJ_CONTEXTS record is supplied when the system has
multiple security modules that may make access decisions based
on an object security context.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subj tweak, audit example readability indents]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
||
|
Casey Schaufler
|
eb59d494ee |
audit: add record for multiple task security contexts
Replace the single skb pointer in an audit_buffer with a list of
skb pointers. Add the audit_stamp information to the audit_buffer as
there's no guarantee that there will be an audit_context containing
the stamp associated with the event. At audit_log_end() time create
auxiliary records as have been added to the list. Functions are
created to manage the skb list in the audit_buffer.
Create a new audit record AUDIT_MAC_TASK_CONTEXTS.
An example of the MAC_TASK_CONTEXTS record is:
type=MAC_TASK_CONTEXTS
msg=audit(1600880931.832:113)
subj_apparmor=unconfined
subj_smack=_
When an audit event includes a AUDIT_MAC_TASK_CONTEXTS record the
"subj=" field in other records in the event will be "subj=?".
An AUDIT_MAC_TASK_CONTEXTS record is supplied when the system has
multiple security modules that may make access decisions based on a
subject security context.
Refactor audit_log_task_context(), creating a new audit_log_subj_ctx().
This is used in netlabel auditing to provide multiple subject security
contexts as necessary.
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subj tweak, audit example readability indents]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
||
|
Konstantin Andreev
|
6ddd169d02 |
smack: fix kernel-doc warnings for smk_import_valid_label()
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202506251712.x5SJiNlh-lkp@intel.com/ Signed-off-by: Konstantin Andreev <andreev@swemel.ru> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> |
||
|
Konstantin Andreev
|
674e2b2479 |
smack: fix bug: setting task label silently ignores input garbage
This command:
# echo foo/bar >/proc/$$/attr/smack/current
gives the task a label 'foo' w/o indication
that label does not match input.
Setting the label with lsm_set_self_attr() syscall
behaves identically.
This occures because:
1) smk_parse_smack() is used to convert input to a label
2) smk_parse_smack() takes only that part from the
beginning of the input that looks like a label.
3) `/' is prohibited in labels, so only "foo" is taken.
(2) is by design, because smk_parse_smack() is used
for parsing strings which are more than just a label.
Silent failure is not a good thing, and there are two
indicators that this was not done intentionally:
(size >= SMK_LONGLABEL) ~> invalid
clause at the beginning of the do_setattr() and the
"Returns the length of the smack label" claim
in the do_setattr() description.
So I fixed this by adding one tiny check:
the taken label length == input length.
Since input length is now strictly controlled,
I changed the two ways of setting label
smack_setselfattr(): lsm_set_self_attr() syscall
smack_setprocattr(): > /proc/.../current
to accommodate the divergence in
what they understand by "input length":
smack_setselfattr counts mandatory \0 into input length,
smack_setprocattr does not.
smack_setprocattr allows various trailers after label
Related changes:
* fixed description for smk_parse_smack
* allow unprivileged tasks validate label syntax.
* extract smk_parse_label_len() from smk_parse_smack()
so parsing may be done w/o string allocation.
* extract smk_import_valid_label() from smk_import_entry()
to avoid repeated parsing.
* smk_parse_smack(): scan null-terminated strings
for no more than SMK_LONGLABEL(256) characters
* smack_setselfattr(): require struct lsm_ctx . flags == 0
to reserve them for future.
Fixes:
|
||
|
Konstantin Andreev
|
c147e13ea7 |
smack: fix bug: unprivileged task can create labels
If an unprivileged task is allowed to relabel itself
(/smack/relabel-self is not empty),
it can freely create new labels by writing their
names into own /proc/PID/attr/smack/current
This occurs because do_setattr() imports
the provided label in advance,
before checking "relabel-self" list.
This change ensures that the "relabel-self" list
is checked before importing the label.
Fixes:
|
||
|
Konstantin Andreev
|
78fc6a94be |
smack: fix bug: invalid label of unix socket file
According to [1], the label of a UNIX domain socket (UDS)
file (i.e., the filesystem object representing the socket)
is not supposed to participate in Smack security.
To achieve this, [1] labels UDS files with "*"
in smack_d_instantiate().
Before [2], smack_d_instantiate() was responsible
for initializing Smack security for all inodes,
except ones under /proc
[2] imposed the sole responsibility for initializing
inode security for newly created filesystem objects
on smack_inode_init_security().
However, smack_inode_init_security() lacks some logic
present in smack_d_instantiate().
In particular, it does not label UDS files with "*".
This patch adds the missing labeling of UDS files
with "*" to smack_inode_init_security().
Labeling UDS files with "*" in smack_d_instantiate()
still works for stale UDS files that already exist on
disk. Stale UDS files are useless, but I keep labeling
them for consistency and maybe to make easier for user
to delete them.
Compared to [1], this version introduces the following
improvements:
* UDS file label is held inside inode only
and not saved to xattrs.
* relabeling UDS files (setxattr, removexattr, etc.)
is blocked.
[1] 2010-11-24 Casey Schaufler
commit
|
||
|
Konstantin Andreev
|
69204f6cdb |
smack: always "instantiate" inode in smack_inode_init_security()
If memory allocation for the SMACK64TRANSMUTE xattr value fails in smack_inode_init_security(), the SMK_INODE_INSTANT flag is not set in (struct inode_smack *issp)->smk_flags, leaving the inode as not "instantiated". It does not matter if fs frees the inode after failed smack_inode_init_security() call, but there is no guarantee for this. To be safe, mark the inode as "instantiated", even if allocation of xattr values fails. Signed-off-by: Konstantin Andreev <andreev@swemel.ru> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> |
||
|
Konstantin Andreev
|
8e5d9f916a |
smack: deduplicate xattr setting in smack_inode_init_security()
Signed-off-by: Konstantin Andreev <andreev@swemel.ru> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> |
||
|
Konstantin Andreev
|
195da3ff24 |
smack: fix bug: SMACK64TRANSMUTE set on non-directory
When a new file system object is created and the conditions for label transmutation are met, the SMACK64TRANSMUTE extended attribute is set on the object regardless of its type: file, pipe, socket, symlink, or directory. However, SMACK64TRANSMUTE may only be set on directories. This bug is a combined effect of the commits [1] and [2] which both transfer functionality from smack_d_instantiate() to smack_inode_init_security(), but only in part. Commit [1] set blank SMACK64TRANSMUTE on improper object types. Commit [2] set "TRUE" SMACK64TRANSMUTE on improper object types. [1] 2023-06-10, Fixes: |
||
|
Konstantin Andreev
|
635a01da83 |
smack: deduplicate "does access rule request transmutation"
Signed-off-by: Konstantin Andreev <andreev@swemel.ru> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> |
||
|
Linus Torvalds
|
1b98f357da |
Networking changes for 6.16.
Core
----
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing
again the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter
---------
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools
still use this interface.
- Implement support for wildcard netdevice in netdev basechain
and flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF
---
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols
---------
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the single
flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API
----------
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling
-----------------
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers
----------------------
- OpenVPN virtual driver: offload OpenVPN data channels processing
to the kernel-space, increasing the data transfer throughput WRT
the user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers
-------
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the stearing table handling to reduce significantly
the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=t/Tz
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
|
||
|
Randy Dunlap
|
4b59f4fd0a |
security/smack/smackfs: small kernel-doc fixes
Add function short descriptions to the kernel-doc where missing. Correct a verb and add ending periods to sentences. smackfs.c:1080: warning: missing initial short description on line: * smk_net4addr_insert smackfs.c:1343: warning: missing initial short description on line: * smk_net6addr_insert Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: linux-security-module@vger.kernel.org Cc: Paul Moore <paul@paul-moore.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> |
||
|
Kuniyuki Iwashima
|
2a63dd0edf |
net: Retire DCCP socket.
DCCP was orphaned in 2021 by commit |
||
|
Konstantin Andreev
|
a158a937d8 |
smack: recognize ipv4 CIPSO w/o categories
If SMACK label has CIPSO representation w/o categories, e.g.:
| # cat /smack/cipso2
| foo 10
| @ 250/2
| ...
then SMACK does not recognize such CIPSO in input ipv4 packets
and substitues '*' label instead. Audit records may look like
| lsm=SMACK fn=smack_socket_sock_rcv_skb action=denied
| subject="*" object="_" requested=w pid=0 comm="swapper/1" ...
This happens in two steps:
1) security/smack/smackfs.c`smk_set_cipso
does not clear NETLBL_SECATTR_MLS_CAT
from (struct smack_known *)skp->smk_netlabel.flags
on assigning CIPSO w/o categories:
| rcu_assign_pointer(skp->smk_netlabel.attr.mls.cat, ncats.attr.mls.cat);
| skp->smk_netlabel.attr.mls.lvl = ncats.attr.mls.lvl;
2) security/smack/smack_lsm.c`smack_from_secattr
can not match skp->smk_netlabel with input packet's
struct netlbl_lsm_secattr *sap
because sap->flags have not NETLBL_SECATTR_MLS_CAT (what is correct)
but skp->smk_netlabel.flags have (what is incorrect):
| if ((sap->flags & NETLBL_SECATTR_MLS_CAT) == 0) {
| if ((skp->smk_netlabel.flags &
| NETLBL_SECATTR_MLS_CAT) == 0)
| found = 1;
| break;
| }
This commit sets/clears NETLBL_SECATTR_MLS_CAT in
skp->smk_netlabel.flags according to the presense of CIPSO categories.
The update of smk_netlabel is not atomic, so input packets processing
still may be incorrect during short time while update proceeds.
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
|
||
|
Konstantin Andreev
|
c7fb50cecf |
smack: Revert "smackfs: Added check catlen"
This reverts commit
|
||
|
Konstantin Andreev
|
bf9f14c91a |
smack: remove /smack/logging if audit is not configured
If CONFIG_AUDIT is not set then SMACK does not generate audit messages, however, keeps audit control file, /smack/logging, while there is no entity to control. This change removes audit control file /smack/logging when audit is not configured in the kernel Signed-off-by: Konstantin Andreev <andreev@swemel.ru> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> |
||
|
Konstantin Andreev
|
6cce0cc386 |
smack: ipv4/ipv6: tcp/dccp/sctp: fix incorrect child socket label
Since inception [1], SMACK initializes ipv* child socket security
for connection-oriented communications (tcp/sctp/dccp)
during accept() syscall, in the security_sock_graft() hook:
| void smack_sock_graft(struct sock *sk, ...)
| {
| // only ipv4 and ipv6 are eligible here
| // ...
| ssp = sk->sk_security; // socket security
| ssp->smk_in = skp; // process label: smk_of_current()
| ssp->smk_out = skp; // process label: smk_of_current()
| }
This approach is incorrect for two reasons:
A) initialization occurs too late for child socket security:
The child socket is created by the kernel once the handshake
completes (e.g., for tcp: after receiving ack for syn+ack).
Data can legitimately start arriving to the child socket
immediately, long before the application calls accept()
on the socket.
Those data are (currently — were) processed by SMACK using
incorrect child socket security attributes.
B) Incoming connection requests are handled using the listening
socket's security, hence, the child socket must inherit the
listening socket's security attributes.
smack_sock_graft() initilizes the child socket's security with
a process label, as is done for a new socket()
But ... the process label is not necessarily the same as the
listening socket label. A privileged application may legitimately
set other in/out labels for a listening socket.
When this happens, SMACK processes incoming packets using
incorrect socket security attributes.
In [2] Michael Lontke noticed (A) and fixed it in [3] by adding
socket initialization into security_sk_clone_security() hook like
| void smack_sk_clone_security(struct sock *oldsk, struct sock *newsk)
| {
| *(struct socket_smack *)newsk->sk_security =
| *(struct socket_smack *)oldsk->sk_security;
| }
This initializes the child socket security with the parent (listening)
socket security at the appropriate time.
I was forced to revisit this old story because
smack_sock_graft() was left in place by [3] and continues overwriting
the child socket's labels with the process label,
and there might be a reason for this, so I undertook a study.
If the process label differs from the listening socket's labels,
the following occurs for ipv4:
assigning the smk_out is not accompanied by netlbl_sock_setattr,
so the outgoing packet's cipso label does not change.
So, the only effect of this assignment for interhost communications
is a divergence between the program-visible “out” socket label and
the cipso network label. For intrahost communications this label,
however, becomes visible via secmark netfilter marking, and is
checked for access rights by the client, receiving side.
Assigning the smk_in affects both interhost and intrahost
communications: the server begins to check access rights against
an wrong label.
Access check against wrong label (smk_in or smk_out),
unsurprisingly fails, breaking the connection.
The above affects protocols that calls security_sock_graft()
during accept(), namely: {tcp,dccp,sctp}/{ipv4,ipv6}
One extra security_sock_graft() caller, crypto/af_alg.c`af_alg_accept
is not affected, because smack_sock_graft() does nothing for PF_ALG.
To reproduce, assign non-default in/out labels to a listening socket,
setup rules between these labels and client label, attempt to connect
and send some data.
Ipv6 specific: ipv6 packets do not convey SMACK labels. To reproduce
the issue in interhost communications set opposite labels in
/smack/ipv6host on both hosts.
Ipv6 intrahost communications do not require tricking, because SMACK
labels are conveyed via secmark netfilter marking.
So, currently smack_sock_graft() is not useful, but harmful,
therefore, I have removed it.
This fixes the issue for {tcp,dccp}/{ipv4,ipv6},
but not sctp/{ipv4,ipv6}.
Although this change is necessary for sctp+smack to function
correctly, it is not sufficient because:
sctp/ipv4 does not call security_sk_clone() and
sctp/ipv6 ignores SMACK completely.
These are separate issues, belong to other subsystem,
and should be addressed separately.
[1] 2008-02-04,
Fixes:
|
||
|
Konstantin Andreev
|
bfcf4004bc |
smack: dont compile ipv6 code unless ipv6 is configured
I want to be sure that ipv6-specific code
is not compiled in kernel binaries
if ipv6 is not configured.
[1] was getting rid of "unused variable" warning, but,
with that, it also mandated compilation of a handful ipv6-
specific functions in ipv4-only kernel configurations:
smk_ipv6_localhost, smack_ipv6host_label, smk_ipv6_check.
Their compiled bodies are likely to be removed by compiler
from the resulting binary, but, to be on the safe side,
I remove them from the compiler view.
[1]
Fixes:
|
||
|
Casey Schaufler
|
2aad5cd1db |
Smack: fix typos and spelling errors
Fix typos and spelling errors in security/smack module comments that were identified using the codespell tool. No functional changes - documentation only. Signed-off-by: Tanya Agarwal <tanyaagarwal25699@gmail.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> |
||
|
Linus Torvalds
|
f96a974170 |
lsm/stable-6.14 PR 20250121
-----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmeQFBoUHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXPvcA//XCdwMz0bGtWKv58nuyP8vkQx08n6 //olz/O8te3uWK5O3kRiarzFLwH8qsHQ6A7GYalwwix34hatR4ndJE0Y/guVRWa1 +aBmJxJ7Jm/q3fvpAEfqiSgreuE6kBoztlDOWEq+hUQGu4qfnQGm2EnvbvfFrAmN VheOfIQSU2KCL/Scc3FGnF6uru4WrqN0JJ9RbvrEpfdQgmcyTGLnQsZLljutWSIq kDWkteIr7cj3O9J45zpxZsTftvYSgVn/y1iKeXbHI4DBA1eheK12vsHB9AADKI1J GwHxOrnLpZtv+ICUKqcfFTmWTl+NmfJJurAT5KXKdBjL3xM5MoJlBvK1A5qE9CMo LaHVG/TZR2MmBaoM3EN+gvWhDgWlvT02Q/0cYaafTlVLMez3HtfctxN6OnCvTXTB Y8dqYClhhlBm/mHQwYfMoeKw4MftUpzEqBd1Nj7Qe8dbP0f/62Ca3K2B3D6Rf8QV pj3ryMlSWYV9mdTerruLNQexTGoN7l66jPwzdWpTbFeL3WmNtfCako8OZGbXgPIu Iahm3P+jnSVx8ZQro2c9zwdKXI5xiI335pCBbDZ8aX+JAsfj0OofHsFx5Q5diber M7tAEhxDqRisbpz7Ei+/LOAEGg2Z619XKg8ks4z6Y4P5PF7zEgeWTkZJk2iLbxXe 6LLOjmF7LLw+G4M= =fgyr -----END PGP SIGNATURE----- Merge tag 'lsm-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm Pull lsm updates from Paul Moore: - Improved handling of LSM "secctx" strings through lsm_context struct The LSM secctx string interface is from an older time when only one LSM was supported, migrate over to the lsm_context struct to better support the different LSMs we now have and make it easier to support new LSMs in the future. These changes explain the Rust, VFS, and networking changes in the diffstat. - Only build lsm_audit.c if CONFIG_SECURITY and CONFIG_AUDIT are enabled Small tweak to be a bit smarter about when we build the LSM's common audit helpers. - Check for absurdly large policies from userspace in SafeSetID SafeSetID policies rules are fairly small, basically just "UID:UID", it easy to impose a limit of KMALLOC_MAX_SIZE on policy writes which helps quiet a number of syzbot related issues. While work is being done to address the syzbot issues through other mechanisms, this is a trivial and relatively safe fix that we can do now. - Various minor improvements and cleanups A collection of improvements to the kernel selftests, constification of some function parameters, removing redundant assignments, and local variable renames to improve readability. * tag 'lsm-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: lockdown: initialize local array before use to quiet static analysis safesetid: check size of policy writes net: corrections for security_secid_to_secctx returns lsm: rename variable to avoid shadowing lsm: constify function parameters security: remove redundant assignment to return variable lsm: Only build lsm_audit.c if CONFIG_SECURITY and CONFIG_AUDIT are set selftests: refactor the lsm `flags_overset_lsm_set_self_attr` test binder: initialize lsm_context structure rust: replace lsm context+len with lsm_context lsm: secctx provider check on release lsm: lsm_context in security_dentry_init_security lsm: use lsm_context in security_inode_getsecctx lsm: replace context+len with lsm_context lsm: ensure the correct LSM context releaser |
||
|
Konstantin Andreev
|
6f71ad02aa |
smack: deduplicate access to string conversion
Signed-off-by: Konstantin Andreev <andreev@swemel.ru> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> |
||
|
Casey Schaufler
|
76ecf306ae |
lsm: use lsm_context in security_inode_getsecctx
Change the security_inode_getsecctx() interface to fill a lsm_context structure instead of data and length pointers. This provides the information about which LSM created the context so that security_release_secctx() can use the correct hook. Cc: linux-nfs@vger.kernel.org Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> [PM: subject tweak] Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Casey Schaufler
|
2d470c7781 |
lsm: replace context+len with lsm_context
Replace the (secctx,seclen) pointer pair with a single lsm_context pointer to allow return of the LSM identifier along with the context and context length. This allows security_release_secctx() to know how to release the context. Callers have been modified to use or save the returned data from the new structure. security_secid_to_secctx() and security_lsmproc_to_secctx() will now return the length value on success instead of 0. Cc: netdev@vger.kernel.org Cc: audit@vger.kernel.org Cc: netfilter-devel@vger.kernel.org Cc: Todd Kjos <tkjos@google.com> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> [PM: subject tweak, kdoc fix, signedness fix from Dan Carpenter] Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Casey Schaufler
|
8afd8c8faa |
lsm: remove lsm_prop scaffolding
Remove the scaffold member from the lsm_prop. Remove the remaining places it is being set. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> [PM: subj line tweak] Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Casey Schaufler
|
05a344e54d |
netlabel,smack: use lsm_prop for audit data
Replace the secid in the netlbl_audit structure with an lsm_prop. Remove scaffolding that was required when the value was a secid. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> [PM: fix the subject line] Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Casey Schaufler
|
b0654ca429 |
lsm: create new security_cred_getlsmprop LSM hook
Create a new LSM hook security_cred_getlsmprop() which, like security_cred_getsecid(), fetches LSM specific attributes from the cred structure. The associated data elements in the audit sub-system are changed from a secid to a lsm_prop to accommodate multiple possible LSM audit users. Cc: linux-integrity@vger.kernel.org Cc: audit@vger.kernel.org Cc: selinux@vger.kernel.org Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> [PM: subj line tweak] Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Casey Schaufler
|
07f9d2c113 |
lsm: use lsm_prop in security_inode_getsecid
Change the security_inode_getsecid() interface to fill in a lsm_prop structure instead of a u32 secid. This allows for its callers to gather data from all registered LSMs. Data is provided for IMA and audit. Change the name to security_inode_getlsmprop(). Cc: linux-integrity@vger.kernel.org Cc: selinux@vger.kernel.org Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> [PM: subj line tweak] Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Casey Schaufler
|
37f670aacd |
lsm: use lsm_prop in security_current_getsecid
Change the security_current_getsecid_subj() and security_task_getsecid_obj() interfaces to fill in a lsm_prop structure instead of a u32 secid. Audit interfaces will need to collect all possible security data for possible reporting. Cc: linux-integrity@vger.kernel.org Cc: audit@vger.kernel.org Cc: selinux@vger.kernel.org Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> [PM: subject line tweak] Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Casey Schaufler
|
f4602f163c |
lsm: use lsm_prop in security_ipc_getsecid
There may be more than one LSM that provides IPC data for auditing. Change security_ipc_getsecid() to fill in a lsm_prop structure instead of the u32 secid. Change the name to security_ipc_getlsmprop() to reflect the change. Cc: audit@vger.kernel.org Cc: linux-security-module@vger.kernel.org Cc: selinux@vger.kernel.org Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> [PM: subject line tweak] Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Casey Schaufler
|
6f2f724f0e |
lsm: add lsmprop_to_secctx hook
Add a new hook security_lsmprop_to_secctx() and its LSM specific implementations. The LSM specific code will use the lsm_prop element allocated for that module. This allows for the possibility that more than one module may be called upon to translate a secid to a string, as can occur in the audit code. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> [PM: subject line tweak] Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Casey Schaufler
|
870b7fdc66 |
lsm: use lsm_prop in security_audit_rule_match
Change the secid parameter of security_audit_rule_match to a lsm_prop structure pointer. Pass the entry from the lsm_prop structure for the approprite slot to the LSM hook. Change the users of security_audit_rule_match to use the lsm_prop instead of a u32. The scaffolding function lsmprop_init() fills the structure with the value of the old secid, ensuring that it is available to the appropriate module hook. The sources of the secid, security_task_getsecid() and security_inode_getsecid(), will be converted to use the lsm_prop structure later in the series. At that point the use of lsmprop_init() is dropped. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> [PM: subject line tweak] Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Linus Torvalds
|
5c36498d06 |
lsm/stable-6.12 PR 20240923
-----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmbxyVEUHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXObWA//dDTn1UMEE2zBE5oF46Yw6FDIipEc TL7ulL6fXHKZnAGOfkNREKydkLddZVH+mG7AyJQL6A/06s3/tl3J6i8yLdYZ67iD 6khZzXvwTA41oLKNB/gVCF3xUUIcifnEqoCIRA9AFg7ck+W/gjtXbHD1xaWYjpqX rAorbAu3YA1Rv+sOe2NWZ0EDUPUzfzBPJEZT27TSwCVoWED9r9BxMvQgdhijf0XZ a0T8wk1RfAvP4+Cf8XPLUkrgu/x9OauLAdx/a48TeODxQ6KjcFUTUtujRsBduzq/ cnJEeXAJwD7YqbuoNmidwTul/RGZS3nsWhEr2i8JBVdWYSDACpahO1Ls3WtJuQt3 oCEQGwrXyPlL4LlcSmRjxL+PLc+MIihjWetIOqgujxKQe82rG+fJlu42zBxbmqnI BglJ3Ps+kcHPdUh216NAiKwJXw00IsUsldCZpAe+ck7Tz3H1OhMtjKNa0H7nqYtn dMV3ieIKj+PVLJTjSeoLSQ3lxx8JFdH7owV7zO++NLsX05dQx8LTUeqSzL6skUk2 ocn0ekBmH4GRSph2nUBsr5W575Zx2VKdGS8nS9d/TxXOzuwflOZpX81kAzwCX+Ru VN9wVlM8qgFwoeK8SlaOD94Jsy7nAeaBu0/H3fYdB5TX1MnNTIOqTtZgxpotr2Gw Z295YFAklGMv7zo= =KDfa -----END PGP SIGNATURE----- Merge tag 'lsm-pr-20240923' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm Pull LSM fixes from Paul Moore: - Add a missing security_mmap_file() check to the remap_file_pages() syscall - Properly reference the SELinux and Smack LSM blobs in the security_watch_key() LSM hook - Fix a random IPE selftest crash caused by a missing list terminator in the test * tag 'lsm-pr-20240923' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: ipe: Add missing terminator to list of unit tests selinux,smack: properly reference the LSM blob in security_watch_key() mm: call the security_mmap_file() LSM hook in remap_file_pages() |
||
|
Paul Moore
|
8a23c9e1ba |
selinux,smack: properly reference the LSM blob in security_watch_key()
Unfortunately when we migrated the lifecycle management of the key LSM
blob to the LSM framework we forgot to convert the security_watch_key()
callbacks for SELinux and Smack. This patch corrects this by making use
of the selinux_key() and smack_key() helper functions respectively.
This patch also removes some input checking in the Smack callback as it
is no longer needed.
Fixes:
|
||
|
Linus Torvalds
|
509d2cd12a |
Smack changes for v6.12
- rcu pointer assignment in smk_set_cipso - indentation in smack_ip_output -----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEC+9tH1YyUwIQzUIeOKUVfIxDyBEFAmbk0uIXHGNhc2V5QHNj aGF1Zmxlci1jYS5jb20ACgkQOKUVfIxDyBG60g//akcCh6Pu93lwer7vtbWRe2dL 88cziDLadaJbSlGl5G8GBUS6J0j5ZGRMrT2G6Ch7dnZyNUr3irwULKL3E5xAz62U UIzp5EqOWX3fChO5H/uKysjm0JtUsTaJALsiZzqacYuC9PHFho8+PBAAB4ALHVoZ 0ar4IW5T7DfJk1rKVfy1z+ClPLQbQVHloS/0gkstHkBTlB3WaHOCvgmv03JxD1Nj +TxLBuin1DYvm0eJtYkIvP8ODv6FRDGY+6ziwHBSCT3dLpOQDgXozGzO48xa6iQa l8UMq9HbzYAd7/bbHiySS99mZ38Yq9E4Tg1SXD9WlgmtBhP6KkYYSzFp8o2lee8x NkR8lOE7Xp8b4lqVqk6HAwpQOfUErXc6BnZ7CHTX5cWmsFI4X9kJQCxJ0CgfnG+W LMByLa3x6V3BnFDG4nP6na6jKBd5iQiika0+VermDrIG/BZ4O4dJMMhwYW+AeA0w 45zKMucUckUA+AOMcbqFCh5EL8C0zWM2PQY8OlfW5oRIzZSeOiyo5/ourtE6ccx0 TZKrqowhuzMqXlVW6891+0EphMIzn3au1MRoPw2t3Xr/BodtgMV9MB6VBfpJ/nax rxBq2YsH9S18Wb+wo7HRekDc2AIbFwG5VvqY8dV4LdFnUbJ+5tq+q+6Yqn648m9K Nkx7UVSXwOImUt0O4KI= =V/iJ -----END PGP SIGNATURE----- Merge tag 'Smack-for-6.12' of https://github.com/cschaufler/smack-next Pull smack updates from Casey Schaufler: "Two patches: one is a simple indentation correction, the other corrects a potentially rcu unsafe pointer assignment" * tag 'Smack-for-6.12' of https://github.com/cschaufler/smack-next: smackfs: Use rcu_assign_pointer() to ensure safe assignment in smk_set_cipso security: smack: Fix indentation in smack_netfilter.c |