This improves the fix for CVE-2026-43500.
Fix the verification of RESPONSE packets to avoid the problem of
overwriting a RESPONSE packet sent via splice to a local address by
extracting the contents of the UDP packet into a kmalloc'd linear buffer
rather than decrypting the data in place in the sk_buff (which may corrupt
the original buffer).
Fixes: 24481a7f57 ("rxrpc: Fix conn-level packet handling to unshare RESPONSE packets")
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Closes: https://lore.kernel.org/r/afKV2zGR6rrelPC7@v4bel/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: Jiayuan Chen <jiayuan.chen@linux.dev>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://patch.msgid.link/20260515230516.2718212-4-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This improves the fix for CVE-2026-43500.
Fix the pagecache corruption from in-place decryption of a DATA packet
transmitted locally by splice() by getting rid of the packet sharing in the
I/O thread and unconditionally extracting the packet content into a bounce
buffer in which the buffer is decrypted. recvmsg() (or the kernel
equivalent) then copies the data from the bounce buffer to the destination
buffer. The sk_buff then remains unmodified.
This has an additional advantage in that the packet is then arranged in the
buffer with the correct alignment required for the crypto algorithms to
process directly. The performance of the crypto does seem to be a little
faster and, surprisingly, the unencrypted performance doesn't seem to
change much - possibly due to removing complexity from the I/O thread.
Yet another advantage is that the I/O thread doesn't have to copy packets
which would slow down packet distribution, ACK generation, etc..
The buffer belongs to the call and is allocated initially at 2K,
sufficiently large to hold a whole jumbo subpacket, but the buffer will be
increased in size if needed. However, to take this work, MSG_PEEK may
cause a later packet to be decrypted into the buffer, in which case the
earlier one will need re-decrypting for a subsequent recvmsg().
Note that rx_pkt_offset may legitimately see 0 as a valid offset now, so
switch to using USHRT_MAX to indicate an invalid offset.
Note also that I would generally prefer to replace the buffers of the
current sk_buff with a new kmalloc'd buffer of the right size, ditching the
old data and frags as this makes the handling of MSG_PEEK easier and
removes the re-decryption issue, but this looks like quite a complicated
thing to achieve. skb_morph() looks half way to what I want, but I don't
want to have to allocate a new sk_buff.
Fixes: d0d5c0cd1e ("rxrpc: Use skb_unshare() rather than skb_cow_data()")
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Closes: https://lore.kernel.org/r/afKV2zGR6rrelPC7@v4bel/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: Jiayuan Chen <jiayuan.chen@linux.dev>
cc: linux-afs@lists.infradead.org
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://patch.msgid.link/20260515230516.2718212-3-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix rxkad_verify_response() to free the ticket and the server key under all
circumstances by initialising the ticket pointer to NULL and then making
all paths through the function after the first allocation has been done go
through a single common epilogue that just releases everything - where all
the releases skip on a NULL pointer.
Fixes: 57af281e53 ("rxrpc: Tidy up abort generation infrastructure")
Fixes: ec832bd06d ("rxrpc: Don't retain the server key in the connection")
Closes: https://sashiko.dev/#/patchset/20260408121252.2249051-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260422161438.2593376-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rxkad_decrypt_ticket() decrypts the RXKAD response ticket and then
parses the buffer as plaintext without checking whether
crypto_skcipher_decrypt() succeeded.
A malformed RESPONSE can therefore use a non-block-aligned ticket
length, make the decrypt operation fail, and still drive the ticket
parser with attacker-controlled bytes.
Check the decrypt result and abort the connection with RXKADBADTICKET
when ticket decryption fails.
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Yuqi Xu <xuyuqiabc@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260408121252.2249051-12-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Fix the following:
BUG: KCSAN: data-race in rxrpc_peer_keepalive_worker / rxrpc_send_data_packet
which is reporting an issue with the reads and writes to ->last_tx_at in:
conn->peer->last_tx_at = ktime_get_seconds();
and:
keepalive_at = peer->last_tx_at + RXRPC_KEEPALIVE_TIME;
The lockless accesses to these to values aren't actually a problem as the
read only needs an approximate time of last transmission for the purposes
of deciding whether or not the transmission of a keepalive packet is
warranted yet.
Also, as ->last_tx_at is a 64-bit value, tearing can occur on a 32-bit
arch.
Fix both of these by switching to an unsigned int for ->last_tx_at and only
storing the LSW of the time64_t. It can then be reconstructed at need
provided no more than 68 years has elapsed since the last transmission.
Fixes: ace45bec6d ("rxrpc: Fix firewall route keepalive")
Reported-by: syzbot+6182afad5045e6703b3d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/695e7cfb.050a0220.1c677c.036b.GAE@google.com/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/1107124.1768903985@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add more tracing for CHALLENGE and RESPONSE packets. Currently, rxrpc only
has client-relevant tracepoints (rx_challenge and tx_response), but add the
server-side ones too.
Further, record the service ID in the rx_challenge tracepoint as well.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250411095303.2316168-14-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the basic parts of the yfs-rxgk security class (security index 6)
to support GSSAPI-negotiated security.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250411095303.2316168-9-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow the app to request that CHALLENGEs be passed to it through an
out-of-band queue that allows recvmsg() to pick it up so that the app can
add data to it with sendmsg().
This will allow the application (AFS or userspace) to interact with the
process if it wants to and put values into user-defined fields. This will
be used by AFS when talking to a fileserver to supply that fileserver with
a crypto key by which callback RPCs can be encrypted (ie. notifications
from the fileserver to the client).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250411095303.2316168-5-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rxrpc: Fix alteration of headers whilst zerocopy pending
AF_RXRPC now uses MSG_SPLICE_PAGES to do zerocopy of the DATA packets when
it transmits them, but to reduce the number of descriptors required in the
DMA ring, it allocates a space for the protocol header in the memory
immediately before the data content so that it can include both in a single
descriptor. This is used for either the main RX header or the smaller
jumbo subpacket header as appropriate:
+----+------+
| RX | |
+-+--+DATA |
|JH| |
+--+------+
Now, when it stitches a large jumbo packet together from a number of
individual DATA packets (each of which is 1412 bytes of data), it uses the
full RX header from the first and then the jumbo subpacket header for the
rest of the components:
+---+--+------+--+------+--+------+--+------+--+------+--+------+
|UDP|RX|DATA |JH|DATA |JH|DATA |JH|DATA |JH|DATA |JH|DATA |
+---+--+------+--+------+--+------+--+------+--+------+--+------+
As mentioned, the main RX header and the jumbo header overlay one another
in memory and the formats don't match, so switching from one to the other
means rearranging the fields and adjusting the flags.
However, now that TLP has been included, it wants to retransmit the last
subpacket as a new data packet on its own, which means switching between
the header formats... and if the transmission is still pending, because of
the MSG_SPLICE_PAGES, we end up corrupting the jumbo subheader.
This has a variety of effects, with the RX service number overwriting the
jumbo checksum/key number field and the RX checksum overwriting the jumbo
flags - resulting in, at the very least, a confused connection-level abort
from the peer.
Fix this by leaving the jumbo header in the allocation with the data, but
allocating the RX header from the page frag allocator and concocting it on
the fly at the point of transmission as it does for ACK packets.
Fixes: 7c48266593 ("rxrpc: Implement RACK/TLP to deal with transmission stalls [RFC8985]")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/2181712.1739131675@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare to be able to send jumbo DATA packets if the we decide to, but
don't enable that yet. This will allow larger chunks of data to be sent
without reducing the retryability as the subpackets in a jumbo packet can
also be retransmitted individually.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-12-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Separate the packet length from the data length (txb->len) stored in the
rxrpc_txbuf to make security calculations easier. Also store the
allocation size as that's an upper bound on the size of the security
wrapper and change a number of fields to unsigned short as the amount of
data can't exceed the capacity of a UDP packet.
Also, whilst we're at it, use kzalloc() for txbufs.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20241204074710.990092-11-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rxrpc_alloc_data_txbuf() may be called with data_align being
zero in none_alloc_txbuf() and rxkad_alloc_txbuf(), data_align
is supposed to be an order-based alignment value, but zero is
not a valid order-based alignment value, and '~(data_align - 1)'
doesn't result in a valid mask-based alignment value for
__page_frag_alloc_align().
Fix it by passing a valid order-based alignment value in
none_alloc_txbuf() and rxkad_alloc_txbuf().
Also use page_frag_alloc_align() expecting an order-based
alignment value in rxrpc_alloc_data_txbuf() to avoid doing the
alignment converting operation and to catch possible invalid
alignment value in the future. Remove the 'if (data_align)'
checking too, as it is always true for a valid order-based
alignment value.
Fixes: 6b2536462f ("rxrpc: Fix use of changed alignment param to page_frag_alloc_align()")
Fixes: 49489bb03a ("rxrpc: Do zerocopy using MSG_SPLICE_PAGES and page frags")
CC: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240428111640.27306-1-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switch from keeping the transmission buffers in the rxrpc_txbuf struct and
allocated from the slab, to allocating them using page fragment allocators
(which uses raw pages), thereby allowing them to be passed to
MSG_SPLICE_PAGES and avoid copying into the UDP buffers.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Don't pick values out of the wire header in rxkad when setting up DATA
packet security, but rather use other sources. This makes it easier to get
rid of txb->wire.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Don't reset the DF flag after transmission, but rather set it when needed
since it should be a fast op now that we call IP directly.
This includes turning it off for RESPONSE packets and, for the moment, ACK
packets. In future, we will need to turn it on for ACK packets used to do
path MTU discovery.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Add a field to rxrpc_txbuf in which to store the checksum to go in the
header as this may get overwritten in the wire header struct when
transmitting as part of a jumbo packet.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
In the Rx protocol, every packet generated is marked with a per-connection
monotonically increasing serial number. This number can be referenced in
an ACK packet generated in response to an incoming packet - thereby
allowing the sender to use this for RTT determination, amongst other
things.
However, if the reference field in the ACK is zero, it doesn't refer to any
incoming packet (it could be a ping to find out if a packet got lost, for
example) - so we shouldn't generate zero serial numbers.
Fix the generation of serial numbers to retry if it comes up with a zero.
Furthermore, since the serial numbers are only ever allocated within the
I/O thread this connection is bound to, there's no need for atomics so
remove that too.
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
rxrpc normally has the Don't Fragment flag set on the UDP packets it
transmits, except when it has decided that DATA packets aren't getting
through - in which case it turns it off just for the DATA transmissions.
This can be a problem, however, for RESPONSE packets that convey
authentication and crypto data from the client to the server as ticket may
be larger than can fit in the MTU.
In such a case, rxrpc gets itself into an infinite loop as the sendmsg
returns an error (EMSGSIZE), which causes rxkad_send_response() to return
-EAGAIN - and the CHALLENGE packet is put back on the Rx queue to retry,
leading to the I/O thread endlessly attempting to perform the transmission.
Fix this by disabling DF on RESPONSE packets for now. The use of DF and
best data MTU determination needs reconsidering at some point in the
future.
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/1581852.1704813048@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the connection setup of client calls to the I/O thread so that a whole
load of locking and barrierage can be eliminated. This necessitates the
app thread waiting for connection to complete before it can begin
encrypting data.
This also completes the fix for a race that exists between call connection
and call disconnection whereby the data transmission code adds the call to
the peer error distribution list after the call has been disconnected (say
by the rxrpc socket getting closed).
The fix is to complete the process of moving call connection, data
transmission and call disconnection into the I/O thread and thus forcibly
serialising them.
Note that the issue may predate the overhaul to an I/O thread model that
were included in the merge window for v6.2, but the timing is very much
changed by the change given below.
Fixes: cf37b59875 ("rxrpc: Move DATA transmission into call processor work item")
Reported-by: syzbot+c22650d2844392afdcfd@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
All the setters of call->state are now in the I/O thread and thus the state
lock is now unnecessary.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Tidy up the abort generation infrastructure in the following ways:
(1) Create an enum and string mapping table to list the reasons an abort
might be generated in tracing.
(2) Replace the 3-char string with the values from (1) in the places that
use that to log the abort source. This gets rid of a memcpy() in the
tracepoint.
(3) Subsume the rxrpc_rx_eproto tracepoint with the rxrpc_abort tracepoint
and use values from (1) to indicate the trace reason.
(4) Always make a call to an abort function at the point of the abort
rather than stashing the values into variables and using goto to get
to a place where it reported. The C optimiser will collapse the calls
together as appropriate. The abort functions return a value that can
be returned directly if appropriate.
Note that this extends into afs also at the points where that generates an
abort. To aid with this, the afs sources need to #define
RXRPC_TRACE_ONLY_DEFINE_ENUMS before including the rxrpc tracing header
because they don't have access to the rxrpc internal structures that some
of the tracepoints make use of.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Clean up connection abort, using the connection state_lock to gate access
to change that state, and use an rxrpc_call_completion value to indicate
the difference between local and remote aborts as these can be pasted
directly into the call state.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Remove the rxrpc_conn_parameters struct from the rxrpc_connection and
rxrpc_bundle structs and emplace the members directly. These are going to
get filled in from the rxrpc_call struct in future.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Remove the kproto() and _proto() debugging macros in preference to using
tracepoints for this.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
The error handling for if skb_copy_bits() fails was accidentally deleted
so the rxkad_decrypt_ticket() function is not called.
Fixes: 5d7edbc923 ("rxrpc: Get rid of the Rx ring")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the rxkad security class, allocate the skcipher used to do packet
encryption and decription rather than allocating one up front and reusing
it for each packet. Reusing the skcipher precludes doing crypto in
parallel.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Change the way the Tx queueing works to make the following ends easier to
achieve:
(1) The filling of packets, the encryption of packets and the transmission
of packets can be handled in parallel by separate threads, rather than
rxrpc_sendmsg() allocating, filling, encrypting and transmitting each
packet before moving onto the next one.
(2) Get rid of the fixed-size ring which sets a hard limit on the number
of packets that can be retained in the ring. This allows the number
of packets to increase without having to allocate a very large ring or
having variable-sized rings.
[Note: the downside of this is that it's then less efficient to locate
a packet for retransmission as we then have to step through a list and
examine each buffer in the list.]
(3) Allow the filler/encrypter to run ahead of the transmission window.
(4) Make it easier to do zero copy UDP from the packet buffers.
(5) Make it easier to do zero copy from userspace to the packet buffers -
and thence to UDP (only if for unauthenticated connections).
To that end, the following changes are made:
(1) Use the new rxrpc_txbuf struct instead of sk_buff for keeping packets
to be transmitted in. This allows them to be placed on multiple
queues simultaneously. An sk_buff isn't really necessary as it's
never passed on to lower-level networking code.
(2) Keep the transmissable packets in a linked list on the call struct
rather than in a ring. As a consequence, the annotation buffer isn't
used either; rather a flag is set on the packet to indicate ackedness.
(3) Use the RXRPC_CALL_TX_LAST flag to indicate that the last packet to be
transmitted has been queued. Add RXRPC_CALL_TX_ALL_ACKED to indicate
that all packets up to and including the last got hard acked.
(4) Wire headers are now stored in the txbuf rather than being concocted
on the stack and they're stored immediately before the data, thereby
allowing zerocopy of a single span.
(5) Don't bother with instant-resend on transmission failure; rather,
leave it for a timer or an ACK packet to trigger.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Get rid of the Rx ring and replace it with a pair of queues instead. One
queue gets the packets that are in-sequence and are ready for processing by
recvmsg(); the other queue gets the out-of-sequence packets for addition to
the first queue as the holes get filled.
The annotation ring is removed and replaced with a SACK table. The SACK
table has the bits set that correspond exactly to the sequence number of
the packet being acked. The SACK ring is copied when an ACK packet is
being assembled and rotated so that the first ACK is in byte 0.
Flow control handling is altered so that packets that are moved to the
in-sequence queue are hard-ACK'd even before they're consumed - and then
the Rx window size in the ACK packet (rsize) is shrunk down to compensate
(even going to 0 if the window is full).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Split up received jumbo packets into separate skbuffs by cloning the
original skbuff for each subpacket and setting the offset and length of the
data in that subpacket in the skbuff's private data. The subpackets are
then placed on the recvmsg queue separately. The security class then gets
to revise the offset and length to remove its metadata.
If we fail to clone a packet, we just drop it and let the peer resend it.
The original packet gets used for the final subpacket.
This should make it easier to handle parallel decryption of the subpackets.
It also simplifies the handling of lost or misordered packets in the
queuing/buffering loop as the possibility of overlapping jumbo packets no
longer needs to be considered.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
rxkad_verify_packet_2() has a small stack-allocated sglist of 4 elements,
but if that isn't sufficient for the number of fragments in the socket
buffer, we try to allocate an sglist large enough to hold all the
fragments.
However, for large packets with a lot of fragments, this isn't sufficient
and we need at least one additional fragment.
The problem manifests as skb_to_sgvec() returning -EMSGSIZE and this then
getting returned by userspace. Most of the time, this isn't a problem as
rxrpc sets a limit of 5692, big enough for 4 jumbo subpackets to be glued
together; occasionally, however, the server will ignore the reported limit
and give a packet that's a lot bigger - say 19852 bytes with ->nr_frags
being 7. skb_to_sgvec() then tries to return a "zeroth" fragment that
seems to occur before the fragments counted by ->nr_frags and we hit the
end of the sglist too early.
Note that __skb_to_sgvec() also has an skb_walk_frags() loop that is
recursive up to 24 deep. I'm not sure if I need to take account of that
too - or if there's an easy way of counting those frags too.
Fix this by counting an extra frag and allocating a larger sglist based on
that.
Fixes: d0d5c0cd1e ("rxrpc: Use skb_unshare() rather than skb_cow_data()")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
When building with Clang we encounter this warning:
| net/rxrpc/rxkad.c:434:33: error: format specifies type 'unsigned short'
| but the argument has type 'u32' (aka 'unsigned int') [-Werror,-Wformat]
| _leave(" = %d [set %hx]", ret, y);
y is a u32 but the format specifier is `%hx`. Going from unsigned int to
short int results in a loss of data. This is surely not intended
behavior. If it is intended, the warning should be suppressed through
other means.
This patch should get us closer to the goal of enabling the -Wformat
flag for Clang builds.
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20220707182052.769989-1-justinstitt@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Variable offset is being assigned a value from a calculation
however the variable is never read, so this redundant variable
can be removed.
Cleans up the following clang-analyzer warning:
net/rxrpc/rxkad.c:579:2: warning: Value stored to 'offset' is never read
[clang-analyzer-deadcode.DeadStores].
net/rxrpc/rxkad.c:485:2: warning: Value stored to 'offset' is never read
[clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ask the security class how much header and trailer space to allow for when
allocating a packet, given how much data is remaining.
This will allow the rxgk security class to stick both a trailer in as well
as a header as appropriate in the future.
Signed-off-by: David Howells <dhowells@redhat.com>
In the rxkad security class, don't use pskb_pull() to advance through the
contents of the response packet. There's no point, especially as the next
and last access to the skbuff still has to allow for the wire header in the
offset (which we didn't advance over).
Better to just add the displacement to the next offset.
Signed-off-by: David Howells <dhowells@redhat.com>
Organise the security information in the rxrpc_connection struct to use a
union to allow for different data for different security classes.
Signed-off-by: David Howells <dhowells@redhat.com>
Insert the security header into the skbuff representing a DATA packet to be
transmitted rather than using skb_reserve() when the packet is allocated.
This makes it easier to apply crypto that spans the security header and the
data, particularly in the upcoming RxGK class where we have a common
encrypt-and-checksum function that is used in a number of circumstances.
Signed-off-by: David Howells <dhowells@redhat.com>
Merge the ->prime_packet_security() into the ->init_connection_security()
hook as they're always called together.
Signed-off-by: David Howells <dhowells@redhat.com>
Hand responsibility for parsing a server key off to the security class. We
can determine which class from the description. This is necessary as rxgk
server keys have different lookup requirements and different content
requirements (dependent on crypto type) to those of rxkad server keys.
Signed-off-by: David Howells <dhowells@redhat.com>
Don't retain a pointer to the server key in the connection, but rather get
it on demand when the server has to deal with a response packet.
This is necessary to implement RxGK (GSSAPI-mediated transport class),
where we can't know which key we'll need until we've challenged the client
and got back the response.
This also means that we don't need to do a key search in the accept path in
softirq mode.
Also, whilst we're at it, allow the security class to ask for a kvno and
encoding-type variant of a server key as RxGK needs different keys for
different encoding types. Keys of this type have an extra bit in the
description:
"<service-id>:<security-index>:<kvno>:<enctype>"
Signed-off-by: David Howells <dhowells@redhat.com>
rxrpc-type keys can have multiple tokens attached for different security
classes. Currently, rxrpc always picks the first one, whether or not the
security class it indicates is supported.
Add preliminary support for choosing which security class will be used
(this will need to be directed from a higher layer) and go through the
tokens to find one that's supported.
Signed-off-by: David Howells <dhowells@redhat.com>
Rewrite the rxrpc client connection manager so that it can support multiple
connections for a given security key to a peer. The following changes are
made:
(1) For each open socket, the code currently maintains an rbtree with the
connections placed into it, keyed by communications parameters. This
is tricky to maintain as connections can be culled from the tree or
replaced within it. Connections can require replacement for a number
of reasons, e.g. their IDs span too great a range for the IDR data
type to represent efficiently, the call ID numbers on that conn would
overflow or the conn got aborted.
This is changed so that there's now a connection bundle object placed
in the tree, keyed on the same parameters. The bundle, however, does
not need to be replaced.
(2) An rxrpc_bundle object can now manage the available channels for a set
of parallel connections. The lock that manages this is moved there
from the rxrpc_connection struct (channel_lock).
(3) There'a a dummy bundle for all incoming connections to share so that
they have a channel_lock too. It might be better to give each
incoming connection its own bundle. This bundle is not needed to
manage which channels incoming calls are made on because that's the
solely at whim of the client.
(4) The restrictions on how many client connections are around are
removed. Instead, a previous patch limits the number of client calls
that can be allocated. Ordinarily, client connections are reaped
after 2 minutes on the idle queue, but when more than a certain number
of connections are in existence, the reaper starts reaping them after
2s of idleness instead to get the numbers back down.
It could also be made such that new call allocations are forced to
wait until the number of outstanding connections subsides.
Signed-off-by: David Howells <dhowells@redhat.com>
Fix a memory leak in rxkad_verify_response() whereby the response buffer
doesn't get freed if we fail to allocate a ticket buffer.
Fixes: ef68622da9 ("rxrpc: Handle temporary errors better in rxkad security")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A ticket was not released after a call of the function
"rxkad_decrypt_ticket" failed. Thus replace the jump target
"temporary_error_free_resp" by "temporary_error_free_ticket".
Fixes: 8c2f826dc3 ("rxrpc: Don't put crypto buffers on the stack")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Markus Elfring <Markus.Elfring@web.de>
Fix rxrpc_new_incoming_call() to check that we have a suitable service key
available for the combination of service ID and security class of a new
incoming call - and to reject calls for which we don't.
This causes an assertion like the following to appear:
rxrpc: Assertion failed - 6(0x6) == 12(0xc) is false
kernel BUG at net/rxrpc/call_object.c:456!
Where call->state is RXRPC_CALL_SERVER_SECURING (6) rather than
RXRPC_CALL_COMPLETE (12).
Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
The in-place decryption routines in AF_RXRPC's rxkad security module
currently call skb_cow_data() to make sure the data isn't shared and that
the skb can be written over. This has a problem, however, as the softirq
handler may be still holding a ref or the Rx ring may be holding multiple
refs when skb_cow_data() is called in rxkad_verify_packet() - and so
skb_shared() returns true and __pskb_pull_tail() dislikes that. If this
occurs, something like the following report will be generated.
kernel BUG at net/core/skbuff.c:1463!
...
RIP: 0010:pskb_expand_head+0x253/0x2b0
...
Call Trace:
__pskb_pull_tail+0x49/0x460
skb_cow_data+0x6f/0x300
rxkad_verify_packet+0x18b/0xb10 [rxrpc]
rxrpc_recvmsg_data.isra.11+0x4a8/0xa10 [rxrpc]
rxrpc_kernel_recv_data+0x126/0x240 [rxrpc]
afs_extract_data+0x51/0x2d0 [kafs]
afs_deliver_fs_fetch_data+0x188/0x400 [kafs]
afs_deliver_to_call+0xac/0x430 [kafs]
afs_wait_for_call_to_complete+0x22f/0x3d0 [kafs]
afs_make_call+0x282/0x3f0 [kafs]
afs_fs_fetch_data+0x164/0x300 [kafs]
afs_fetch_data+0x54/0x130 [kafs]
afs_readpages+0x20d/0x340 [kafs]
read_pages+0x66/0x180
__do_page_cache_readahead+0x188/0x1a0
ondemand_readahead+0x17d/0x2e0
generic_file_read_iter+0x740/0xc10
__vfs_read+0x145/0x1a0
vfs_read+0x8c/0x140
ksys_read+0x4a/0xb0
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this by using skb_unshare() instead in the input path for DATA packets
that have a security index != 0. Non-DATA packets don't need in-place
encryption and neither do unencrypted DATA packets.
Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Reported-by: Julian Wollrath <jwollrath@web.de>
Signed-off-by: David Howells <dhowells@redhat.com>
