When a packet enters OVS datapath and there is no flow to handle it,
packet goes to userspace through a MISS upcall. With per-CPU upcall
dispatch mechanism, we're using the current CPU id to select the
Netlink PID on which to send this packet. This allows us to send
packets from the same traffic flow through the same handler.
The handler will process the packet, install required flow into the
kernel and re-inject the original packet via OVS_PACKET_CMD_EXECUTE.
While handling OVS_PACKET_CMD_EXECUTE, however, we may hit a
recirculation action that will pass the (likely modified) packet
through the flow lookup again. And if the flow is not found, the
packet will be sent to userspace again through another MISS upcall.
However, the handler thread in userspace is likely running on a
different CPU core, and the OVS_PACKET_CMD_EXECUTE request is handled
in the syscall context of that thread. So, when the time comes to
send the packet through another upcall, the per-CPU dispatch will
choose a different Netlink PID, and this packet will end up processed
by a different handler thread on a different CPU.
The process continues as long as there are new recirculations, each
time the packet goes to a different handler thread before it is sent
out of the OVS datapath to the destination port. In real setups the
number of recirculations can go up to 4 or 5, sometimes more.
There is always a chance to re-order packets while processing upcalls,
because userspace will first install the flow and then re-inject the
original packet. So, there is a race window when the flow is already
installed and the second packet can match it and be forwarded to the
destination before the first packet is re-injected. But the fact that
packets are going through multiple upcalls handled by different
userspace threads makes the reordering noticeably more likely, because
we not only have a race between the kernel and a userspace handler
(which is hard to avoid), but also between multiple userspace handlers.
For example, let's assume that 10 packets got enqueued through a MISS
upcall for handler-1, it will start processing them, will install the
flow into the kernel and start re-injecting packets back, from where
they will go through another MISS to handler-2. Handler-2 will install
the flow into the kernel and start re-injecting the packets, while
handler-1 continues to re-inject the last of the 10 packets, they will
hit the flow installed by handler-2 and be forwarded without going to
the handler-2, while handler-2 still re-injects the first of these 10
packets. Given multiple recirculations and misses, these 10 packets
may end up completely mixed up on the output from the datapath.
Let's allow userspace to specify on which Netlink PID the packets
should be upcalled while processing OVS_PACKET_CMD_EXECUTE.
This makes it possible to ensure that all the packets are processed
by the same handler thread in the userspace even with them being
upcalled multiple times in the process. Packets will remain in order
since they will be enqueued to the same socket and re-injected in the
same order. This doesn't eliminate re-ordering as stated above, since
we still have a race between kernel and the userspace thread, but it
allows to eliminate races between multiple userspace threads.
Userspace knows the PID of the socket on which the original upcall is
received, so there is no need to send it up from the kernel.
Solution requires storing the value somewhere for the duration of the
packet processing. There are two potential places for this: our skb
extension or the per-CPU storage. It's not clear which is better,
so just following currently used scheme of storing this kind of things
along the skb. We still have a decent amount of space in the cb.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Flavio Leitner <fbl@sysclose.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250702155043.2331772-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PERCPU_MODULE_RESERVE defines the maximum size that can by used for the
per-CPU data size used by modules. This is 8KiB.
Commit 035fcdc4d2 ("openvswitch: Merge three per-CPU structures into
one") restructured the per-CPU memory allocation for the module and
moved the separate alloc_percpu() invocations at module init time to a
static per-CPU variable which is allocated by the module loader.
The size of the per-CPU data section for openvswitch is 6488 bytes which
is ~80% of the available per-CPU memory. Together with a few other
modules it is easy to exhaust the available 8KiB of memory.
Allocate ovs_pcpu_storage dynamically at module init time.
Reported-by: Gal Pressman <gal@nvidia.com>
Closes: https://lore.kernel.org/all/c401e017-f8db-4f57-a1cd-89beb979a277@nvidia.com
Fixes: 035fcdc4d2 ("openvswitch: Merge three per-CPU structures into one")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250613123629.-XSoQTCu@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The unexpected MPLS packet may not end with the bottom label stack.
When there are many stacks, The label count value has wrapped around.
A dead loop occurs, soft lockup/CPU stuck finally.
stack backtrace:
UBSAN: array-index-out-of-bounds in /build/linux-0Pa0xK/linux-5.15.0/net/openvswitch/flow.c:662:26
index -1 is out of range for type '__be32 [3]'
CPU: 34 PID: 0 Comm: swapper/34 Kdump: loaded Tainted: G OE 5.15.0-121-generic #131-Ubuntu
Hardware name: Dell Inc. PowerEdge C6420/0JP9TF, BIOS 2.12.2 07/14/2021
Call Trace:
<IRQ>
show_stack+0x52/0x5c
dump_stack_lvl+0x4a/0x63
dump_stack+0x10/0x16
ubsan_epilogue+0x9/0x36
__ubsan_handle_out_of_bounds.cold+0x44/0x49
key_extract_l3l4+0x82a/0x840 [openvswitch]
? kfree_skbmem+0x52/0xa0
key_extract+0x9c/0x2b0 [openvswitch]
ovs_flow_key_extract+0x124/0x350 [openvswitch]
ovs_vport_receive+0x61/0xd0 [openvswitch]
? kernel_init_free_pages.part.0+0x4a/0x70
? get_page_from_freelist+0x353/0x540
netdev_port_receive+0xc4/0x180 [openvswitch]
? netdev_port_receive+0x180/0x180 [openvswitch]
netdev_frame_hook+0x1f/0x40 [openvswitch]
__netif_receive_skb_core.constprop.0+0x23a/0xf00
__netif_receive_skb_list_core+0xfa/0x240
netif_receive_skb_list_internal+0x18e/0x2a0
napi_complete_done+0x7a/0x1c0
bnxt_poll+0x155/0x1c0 [bnxt_en]
__napi_poll+0x30/0x180
net_rx_action+0x126/0x280
? bnxt_msix+0x67/0x80 [bnxt_en]
handle_softirqs+0xda/0x2d0
irq_exit_rcu+0x96/0xc0
common_interrupt+0x8e/0xa0
</IRQ>
Fixes: fbdcdd78da ("Change in Openvswitch to support MPLS label depth of 3 in ingress direction")
Signed-off-by: Faicker Mo <faicker.mo@zenlayer.com>
Acked-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/259D3404-575D-4A6D-B263-1DF59A67CF89@zenlayer.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Make sctp_compute_cksum() just use the new function skb_crc32c(),
instead of calling __skb_checksum() with a skb_checksum_ops struct that
does CRC32C. This is faster and simpler.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-6-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ovs_frag_data_storage is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Move ovs_frag_data_storage into the struct ovs_pcpu_storage which already
provides locking for the structure.
Cc: Aaron Conole <aconole@redhat.com>
Cc: Eelco Chaudron <echaudro@redhat.com>
Cc: Ilya Maximets <i.maximets@ovn.org>
Cc: dev@openvswitch.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250512092736.229935-10-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ovs_pcpu_storage is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
The data structure can be referenced recursive and there is a recursion
counter to avoid too many recursions.
Add a local_lock_t to the data structure and use
local_lock_nested_bh() for locking. Add an owner of the struct which is
the current task and acquire the lock only if the structure is not owned
by the current task.
Cc: Aaron Conole <aconole@redhat.com>
Cc: Eelco Chaudron <echaudro@redhat.com>
Cc: Ilya Maximets <i.maximets@ovn.org>
Cc: dev@openvswitch.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250512092736.229935-9-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
exec_actions_level is a per-CPU integer allocated at compile time.
action_fifos and flow_keys are per-CPU pointer and have their data
allocated at module init time.
There is no gain in splitting it, once the module is allocated, the
structures are allocated.
Merge the three per-CPU variables into ovs_pcpu_storage, adapt callers.
Cc: Aaron Conole <aconole@redhat.com>
Cc: Eelco Chaudron <echaudro@redhat.com>
Cc: Ilya Maximets <i.maximets@ovn.org>
Cc: dev@openvswitch.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250512092736.229935-8-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This change enhances the robustness of validate_userspace() by ensuring
that all Netlink attributes are fully contained within the parent
attribute. The previous use of nla_parse_nested_deprecated() could
silently skip trailing or malformed attributes, as it stops parsing at
the first invalid entry.
By switching to nla_parse_deprecated_strict(), we make sure only fully
validated attributes are copied for later use.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/67eb414e2d250e8408bb8afeb982deca2ff2b10b.1747037304.git.echaudro@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch replaces the manual Netlink attribute iteration in
output_userspace() with nla_for_each_nested(), which ensures that only
well-formed attributes are processed.
Fixes: ccb1352e76 ("net: Add Open vSwitch kernel components.")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/0bd65949df61591d9171c0dc13e42cea8941da10.1746541734.git.echaudro@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Finish cleaning up the CRC kconfig options by removing the remaining
unnecessary prompts and an unnecessary 'default y', removing
CONFIG_LIBCRC32C, and documenting all the CRC library options.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZ/P7QhQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKyoOAQCynFcS1dWuD27S+SdUREmBjMAoZo5M
zdsIvlPv9KLycgD/QX5lXjW3KIYY6jQ8vHUuLVwfDl/JEp4GJS9dLGU+agg=
=0R1T
-----END PGP SIGNATURE-----
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC cleanups from Eric Biggers:
"Finish cleaning up the CRC kconfig options by removing the remaining
unnecessary prompts and an unnecessary 'default y', removing
CONFIG_LIBCRC32C, and documenting all the CRC library options"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crc: remove CONFIG_LIBCRC32C
lib/crc: document all the CRC library kconfig options
lib/crc: remove unnecessary prompt for CONFIG_CRC_ITU_T
lib/crc: remove unnecessary prompt for CONFIG_CRC_T10DIF
lib/crc: remove unnecessary prompt for CONFIG_CRC16
lib/crc: remove unnecessary prompt for CONFIG_CRC_CCITT
lib/crc: remove unnecessary prompt for CONFIG_CRC32 and drop 'default y'
Now that LIBCRC32C does nothing besides select CRC32, make every option
that selects LIBCRC32C instead select CRC32 directly. Then remove
LIBCRC32C.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250401221600.24878-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Because skb_tunnel_check_pmtu() doesn't handle PACKET_HOST packets,
commit 30a92c9e3d ("openvswitch: Set the skbuff pkt_type for proper
pmtud support.") forced skb->pkt_type to PACKET_OUTGOING for
openvswitch packets that are sent using the OVS_ACTION_ATTR_OUTPUT
action. This allowed such packets to invoke the
iptunnel_pmtud_check_icmp() or iptunnel_pmtud_check_icmpv6() helpers
and thus trigger PMTU update on the input device.
However, this also broke other parts of PMTU discovery. Since these
packets don't have the PACKET_HOST type anymore, they won't trigger the
sending of ICMP Fragmentation Needed or Packet Too Big messages to
remote hosts when oversized (see the skb_in->pkt_type condition in
__icmp_send() for example).
These two skb->pkt_type checks are therefore incompatible as one
requires skb->pkt_type to be PACKET_HOST, while the other requires it
to be anything but PACKET_HOST.
It makes sense to not trigger ICMP messages for non-PACKET_HOST packets
as these messages should be generated only for incoming l2-unicast
packets. However there doesn't seem to be any reason for
skb_tunnel_check_pmtu() to ignore PACKET_HOST packets.
Allow both cases to work by allowing skb_tunnel_check_pmtu() to work on
PACKET_HOST packets and not overriding skb->pkt_type in openvswitch
anymore.
Fixes: 30a92c9e3d ("openvswitch: Set the skbuff pkt_type for proper pmtud support.")
Fixes: 4cb47a8644 ("tunnels: PMTU discovery support for directly bridged IP packets")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Tested-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/eac941652b86fddf8909df9b3bf0d97bc9444793.1743208264.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some field descriptions were missing, some were not very accurate.
Not touching the uAPI header or .c files for now.
Formatting of those comments isn't great in general, but at least
they are not missing anything now.
Before:
$ ./scripts/kernel-doc -none -Wall net/openvswitch/*.h 2>&1 | wc -l
16
After:
$ ./scripts/kernel-doc -none -Wall net/openvswitch/*.h 2>&1 | wc -l
0
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250320224431.252489-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
tools/testing/selftests/drivers/net/ping.py
75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
de94e86974 ("selftests: drv-net: store addresses in dict indexed by ipver")
https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/
net/core/devmem.c
a70f891e0f ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()")
1d22d3060b ("net: drop rtnl_lock for queue_mgmt operations")
https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/
Adjacent changes:
tools/testing/selftests/net/Makefile
6f50175cca ("selftests: Add IPv6 link-local address generation tests for GRE devices.")
2e5584e0f9 ("selftests/net: expand cmsg_ipv6.sh with ipv4")
drivers/net/ethernet/broadcom/bnxt/bnxt.c
661958552e ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic")
fe96d717d3 ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, ovs_ct_set_labels() is only called for confirmed conntrack
entries (ct) within ovs_ct_commit(). However, if the conntrack entry
does not have the labels_ext extension, attempting to allocate it in
ovs_ct_get_conn_labels() for a confirmed entry triggers a warning in
nf_ct_ext_add():
WARN_ON(nf_ct_is_confirmed(ct));
This happens when the conntrack entry is created externally before OVS
increments net->ct.labels_used. The issue has become more likely since
commit fcb1aa5163 ("openvswitch: switch to per-action label counting
in conntrack"), which changed to use per-action label counting and
increment net->ct.labels_used when a flow with ct action is added.
Since there’s no straightforward way to fully resolve this issue at the
moment, this reverts the commit to avoid breaking existing use cases.
Fixes: fcb1aa5163 ("openvswitch: switch to per-action label counting in conntrack")
Reported-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/1bdeb2f3a812bca016a225d3de714427b2cd4772.1741457143.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The actions length check is unreliable and produces different results
depending on the initial length of the provided netlink attribute and
the composition of the actual actions inside of it. For example, a
user can add 4088 empty clone() actions without triggering -EMSGSIZE,
on attempt to add 4089 such actions the operation will fail with the
-EMSGSIZE verdict. However, if another 16 KB of other actions will
be *appended* to the previous 4089 clone() actions, the check passes
and the flow is successfully installed into the openvswitch datapath.
The reason for a such a weird behavior is the way memory is allocated.
When ovs_flow_cmd_new() is invoked, it calls ovs_nla_copy_actions(),
that in turn calls nla_alloc_flow_actions() with either the actual
length of the user-provided actions or the MAX_ACTIONS_BUFSIZE. The
function adds the size of the sw_flow_actions structure and then the
actually allocated memory is rounded up to the closest power of two.
So, if the user-provided actions are larger than MAX_ACTIONS_BUFSIZE,
then MAX_ACTIONS_BUFSIZE + sizeof(*sfa) rounded up is 32K + 24 -> 64K.
Later, while copying individual actions, we look at ksize(), which is
64K, so this way the MAX_ACTIONS_BUFSIZE check is not actually
triggered and the user can easily allocate almost 64 KB of actions.
However, when the initial size is less than MAX_ACTIONS_BUFSIZE, but
the actions contain ones that require size increase while copying
(such as clone() or sample()), then the limit check will be performed
during the reserve_sfa_size() and the user will not be allowed to
create actions that yield more than 32 KB internally.
This is one part of the problem. The other part is that it's not
actually possible for the userspace application to know beforehand
if the particular set of actions will be rejected or not.
Certain actions require more space in the internal representation,
e.g. an empty clone() takes 4 bytes in the action list passed in by
the user, but it takes 12 bytes in the internal representation due
to an extra nested attribute, and some actions require less space in
the internal representations, e.g. set(tunnel(..)) normally takes
64+ bytes in the action list provided by the user, but only needs to
store a single pointer in the internal implementation, since all the
data is stored in the tunnel_info structure instead.
And the action size limit is applied to the internal representation,
not to the action list passed by the user. So, it's not possible for
the userpsace application to predict if the certain combination of
actions will be rejected or not, because it is not possible for it to
calculate how much space these actions will take in the internal
representation without knowing kernel internals.
All that is causing random failures in ovs-vswitchd in userspace and
inability to handle certain traffic patterns as a result. For example,
it is reported that adding a bit more than a 1100 VMs in an OpenStack
setup breaks the network due to OVS not being able to handle ARP
traffic anymore in some cases (it tries to install a proper datapath
flow, but the kernel rejects it with -EMSGSIZE, even though the action
list isn't actually that large.)
Kernel behavior must be consistent and predictable in order for the
userspace application to use it in a reasonable way. ovs-vswitchd has
a mechanism to re-direct parts of the traffic and partially handle it
in userspace if the required action list is oversized, but that doesn't
work properly if we can't actually tell if the action list is oversized
or not.
Solution for this is to check the size of the user-provided actions
instead of the internal representation. This commit just removes the
check from the internal part because there is already an implicit size
check imposed by the netlink protocol. The attribute can't be larger
than 64 KB. Realistically, we could reduce the limit to 32 KB, but
we'll be risking to break some existing setups that rely on the fact
that it's possible to create nearly 64 KB action lists today.
Vast majority of flows in real setups are below 100-ish bytes. So
removal of the limit will not change real memory consumption on the
system. The absolutely worst case scenario is if someone adds a flow
with 64 KB of empty clone() actions. That will yield a 192 KB in the
internal representation consuming 256 KB block of memory. However,
that list of actions is not meaningful and also a no-op. Real world
very large action lists (that can occur for a rare cases of BUM
traffic handling) are unlikely to contain a large number of clones and
will likely have a lot of tunnel attributes making the internal
representation comparable in size to the original action list.
So, it should be fine to just remove the limit.
Commit in the 'Fixes' tag is the first one that introduced the
difference between internal representation and the user-provided action
lists, but there were many more afterwards that lead to the situation
we have today.
Fixes: 7d5437c709 ("openvswitch: Add tunneling interface.")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250308004609.2881861-1-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The name 'netns_local' is confusing. A following commit will export it via
netlink, so let's use a more explicit name.
Reported-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ovs_vport_cmd_fill_info() can be called without RTNL or RCU.
Use RCU protection and dev_net_rcu() to avoid potential UAF.
Fixes: 9354d45203 ("openvswitch: reliable interface indentification in port dumps")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250207135841.1948589-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit in a fixes tag attempted to fix the issue in the following
sequence of calls:
do_output
-> ovs_vport_send
-> dev_queue_xmit
-> __dev_queue_xmit
-> netdev_core_pick_tx
-> skb_tx_hash
When device is unregistering, the 'dev->real_num_tx_queues' goes to
zero and the 'while (unlikely(hash >= qcount))' loop inside the
'skb_tx_hash' becomes infinite, locking up the core forever.
But unfortunately, checking just the carrier status is not enough to
fix the issue, because some devices may still be in unregistering
state while reporting carrier status OK.
One example of such device is a net/dummy. It sets carrier ON
on start, but it doesn't implement .ndo_stop to set the carrier off.
And it makes sense, because dummy doesn't really have a carrier.
Therefore, while this device is unregistering, it's still easy to hit
the infinite loop in the skb_tx_hash() from the OVS datapath. There
might be other drivers that do the same, but dummy by itself is
important for the OVS ecosystem, because it is frequently used as a
packet sink for tcpdump while debugging OVS deployments. And when the
issue is hit, the only way to recover is to reboot.
Fix that by also checking if the device is running. The running
state is handled by the net core during unregistering, so it covers
unregistering case better, and we don't really need to send packets
to devices that are not running anyway.
While only checking the running state might be enough, the carrier
check is preserved. The running and the carrier states seem disjoined
throughout the code and different drivers. And other core functions
like __dev_direct_xmit() check both before attempting to transmit
a packet. So, it seems safer to check both flags in OVS as well.
Fixes: 066b86787f ("net: openvswitch: fix race on port output")
Reported-by: Friedrich Weber <f.weber@proxmox.com>
Closes: https://mail.openvswitch.org/pipermail/ovs-discuss/2025-January/053423.html
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Tested-by: Friedrich Weber <f.weber@proxmox.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250109122225.4034688-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most of the original conversion is from the spatch below,
but I edited some and left out other instances that were
either buggy after conversion (where default values don't
fit into the type) or just looked strange.
@@
expression attr, def;
expression val;
identifier fn =~ "^nla_get_.*";
fresh identifier dfn = fn ## "_default";
@@
(
-if (attr)
- val = fn(attr);
-else
- val = def;
+val = dfn(attr, def);
|
-if (!attr)
- val = def;
-else
- val = fn(attr);
+val = dfn(attr, def);
|
-if (!attr)
- return def;
-return fn(attr);
+return dfn(attr, def);
|
-attr ? fn(attr) : def
+dfn(attr, def)
|
-!attr ? def : fn(attr)
+dfn(attr, def)
)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@kernel.org>
Link: https://patch.msgid.link/20241108114145.0580b8684e7f.I740beeaa2f70ebfc19bfca1045a24d6151992790@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clearing the secpath for internal ports will cause packet drops when
ipsec offload or early SW ipsec decrypt are used. Systems that rely
on these will not be able to actually pass traffic via openvswitch.
There is still an open issue for a flow miss packet - this is because
we drop the extensions during upcall and there is no facility to
restore such data (and it is non-trivial to add such functionality
to the upcall interface). That means that when a flow miss occurs,
there will still be packet drops. With this patch, when a flow is
found then traffic which has an associated xfrm extension will
properly flow.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20241101204732.183840-1-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
"Interface can't change network namespaces" is rather an attribute,
not a feature, and it can't be changed via Ethtool.
Make it a "cold" private flag instead of a netdev_feature and free
one more bit.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
NETIF_F_LLTX can't be changed via Ethtool and is not a feature,
rather an attribute, very similar to IFF_NO_QUEUE (and hot).
Free one netdev_features_t bit and make it a "hot" private flag.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Using ERR_CAST() is more reasonable and safer, When it is necessary
to convert the type of an error pointer and return it.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20240829095509.3151987-1-yanzhen@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
<tldr>
skb network header of the single-tagged vlan packet continues to point the
vlan payload (e.g. IP) after second vlan tag is pushed by tc act_vlan. This
causes problem at the dissector which expects double-tagged packet network
header to point to the inner vlan.
The fix is to adjust network header in tcf_act_vlan.c but requires
refactoring of skb_vlan_push function.
</tldr>
Consider the following shell script snippet configuring TC rules on the
veth interface:
ip link add veth0 type veth peer veth1
ip link set veth0 up
ip link set veth1 up
tc qdisc add dev veth0 clsact
tc filter add dev veth0 ingress pref 10 chain 0 flower \
num_of_vlans 2 cvlan_ethtype 0x800 action goto chain 5
tc filter add dev veth0 ingress pref 20 chain 0 flower \
num_of_vlans 1 action vlan push id 100 \
protocol 0x8100 action goto chain 5
tc filter add dev veth0 ingress pref 30 chain 5 flower \
num_of_vlans 2 cvlan_ethtype 0x800 action simple sdata "success"
Sending double-tagged vlan packet with the IP payload inside:
cat <<ENDS | text2pcap - - | tcpreplay -i veth1 -
0000 00 00 00 00 00 11 00 00 00 00 00 22 81 00 00 64 ..........."...d
0010 81 00 00 14 08 00 45 04 00 26 04 d2 00 00 7f 11 ......E..&......
0020 18 ef 0a 00 00 01 14 00 00 02 00 00 00 00 00 12 ................
0030 e1 c7 00 00 00 00 00 00 00 00 00 00 ............
ENDS
will match rule 10, goto rule 30 in chain 5 and correctly emit "success" to
the dmesg.
OTOH, sending single-tagged vlan packet:
cat <<ENDS | text2pcap - - | tcpreplay -i veth1 -
0000 00 00 00 00 00 11 00 00 00 00 00 22 81 00 00 14 ..........."....
0010 08 00 45 04 00 2a 04 d2 00 00 7f 11 18 eb 0a 00 ..E..*..........
0020 00 01 14 00 00 02 00 00 00 00 00 16 e1 bf 00 00 ................
0030 00 00 00 00 00 00 00 00 00 00 00 00 ............
ENDS
will match rule 20, will push the second vlan tag but will *not* match
rule 30. IOW, the match at rule 30 fails if the second vlan was freshly
pushed by the kernel.
Lets look at __skb_flow_dissect working on the double-tagged vlan packet.
Here is the relevant code from around net/core/flow_dissector.c:1277
copy-pasted here for convenience:
if (dissector_vlan == FLOW_DISSECTOR_KEY_MAX &&
skb && skb_vlan_tag_present(skb)) {
proto = skb->protocol;
} else {
vlan = __skb_header_pointer(skb, nhoff, sizeof(_vlan),
data, hlen, &_vlan);
if (!vlan) {
fdret = FLOW_DISSECT_RET_OUT_BAD;
break;
}
proto = vlan->h_vlan_encapsulated_proto;
nhoff += sizeof(*vlan);
}
The "else" clause above gets the protocol of the encapsulated packet from
the skb data at the network header location. printk debugging has showed
that in the good double-tagged packet case proto is
htons(0x800 == ETH_P_IP) as expected. However in the single-tagged packet
case proto is garbage leading to the failure to match tc filter 30.
proto is being set from the skb header pointed by nhoff parameter which is
defined at the beginning of __skb_flow_dissect
(net/core/flow_dissector.c:1055 in the current version):
nhoff = skb_network_offset(skb);
Therefore the culprit seems to be that the skb network offset is different
between double-tagged packet received from the interface and single-tagged
packet having its vlan tag pushed by TC.
Lets look at the interesting points of the lifetime of the single/double
tagged packets as they traverse our packet flow.
Both of them will start at __netif_receive_skb_core where the first vlan
tag will be stripped:
if (eth_type_vlan(skb->protocol)) {
skb = skb_vlan_untag(skb);
if (unlikely(!skb))
goto out;
}
At this stage in double-tagged case skb->data points to the second vlan tag
while in single-tagged case skb->data points to the network (eg. IP)
header.
Looking at TC vlan push action (net/sched/act_vlan.c) we have the following
code at tcf_vlan_act (interesting points are in square brackets):
if (skb_at_tc_ingress(skb))
[1] skb_push_rcsum(skb, skb->mac_len);
....
case TCA_VLAN_ACT_PUSH:
err = skb_vlan_push(skb, p->tcfv_push_proto, p->tcfv_push_vid |
(p->tcfv_push_prio << VLAN_PRIO_SHIFT),
0);
if (err)
goto drop;
break;
....
out:
if (skb_at_tc_ingress(skb))
[3] skb_pull_rcsum(skb, skb->mac_len);
And skb_vlan_push (net/core/skbuff.c:6204) function does:
err = __vlan_insert_tag(skb, skb->vlan_proto,
skb_vlan_tag_get(skb));
if (err)
return err;
skb->protocol = skb->vlan_proto;
[2] skb->mac_len += VLAN_HLEN;
in the case of pushing the second tag. Lets look at what happens with
skb->data of the single-tagged packet at each of the above points:
1. As a result of the skb_push_rcsum, skb->data is moved back to the start
of the packet.
2. First VLAN tag is moved from the skb into packet buffer, skb->mac_len is
incremented, skb->data still points to the start of the packet.
3. As a result of the skb_pull_rcsum, skb->data is moved forward by the
modified skb->mac_len, thus pointing to the network header again.
Then __skb_flow_dissect will get confused by having double-tagged vlan
packet with the skb->data at the network header.
The solution for the bug is to preserve "skb->data at second vlan header"
semantics in the skb_vlan_push function. We do this by manipulating
skb->network_header rather than skb->mac_len. skb_vlan_push callers are
updated to do skb_reset_mac_len.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=O8tu
-----END PGP SIGNATURE-----
Merge tag 'nf-next-24-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next:
Patch #1 fix checksum calculation in nfnetlink_queue with SCTP,
segment GSO packet since skb_zerocopy() does not support
GSO_BY_FRAGS, from Antonio Ojea.
Patch #2 extend nfnetlink_queue coverage to handle SCTP packets,
from Antonio Ojea.
Patch #3 uses consume_skb() instead of kfree_skb() in nfnetlink,
from Donald Hunter.
Patch #4 adds a dedicate commit list for sets to speed up
intra-transaction lookups, from Florian Westphal.
Patch #5 skips removal of element from abort path for the pipapo
backend, ditching the shadow copy of this datastructure
is sufficient.
Patch #6 moves nf_ct_netns_get() out of nf_conncount_init() to
let users of conncoiunt decide when to enable conntrack,
this is needed by openvswitch, from Xin Long.
Patch #7 pass context to all nft_parse_register_load() in
preparation for the next patch.
Patches #8 and #9 reject loads from uninitialized registers from
control plane to remove register initialization from
datapath. From Florian Westphal.
* tag 'nf-next-24-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: don't initialize registers in nft_do_chain()
netfilter: nf_tables: allow loads only when register is initialized
netfilter: nf_tables: pass context structure to nft_parse_register_load
netfilter: move nf_ct_netns_get out of nf_conncount_init
netfilter: nf_tables: do not remove elements if set backend implements .abort
netfilter: nf_tables: store new sets in dedicated list
netfilter: nfnetlink: convert kfree_skb to consume_skb
selftests: netfilter: nft_queue.sh: sctp coverage
netfilter: nfnetlink_queue: unbreak SCTP traffic
====================
Link: https://patch.msgid.link/20240822221939.157858-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.h
c948c0973d ("bnxt_en: Don't clear ntuple filters and rss contexts during ethtool ops")
f2878cdeb7 ("bnxt_en: Add support to call FW to update a VNIC")
Link: https://patch.msgid.link/20240822210125.1542769-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is something wrong with ovs_drop_reasons. ovs_drop_reasons[0] is
"OVS_DROP_LAST_ACTION", but OVS_DROP_LAST_ACTION == __OVS_DROP_REASON + 1,
which means that ovs_drop_reasons[1] should be "OVS_DROP_LAST_ACTION".
And as Adrian tested, without the patch, adding flow to drop packets
results in:
drop at: do_execute_actions+0x197/0xb20 [openvsw (0xffffffffc0db6f97)
origin: software
input port ifindex: 8
timestamp: Tue Aug 20 10:19:17 2024 859853461 nsec
protocol: 0x800
length: 98
original length: 98
drop reason: OVS_DROP_ACTION_ERROR
With the patch, the same results in:
drop at: do_execute_actions+0x197/0xb20 [openvsw (0xffffffffc0db6f97)
origin: software
input port ifindex: 8
timestamp: Tue Aug 20 10:16:13 2024 475856608 nsec
protocol: 0x800
length: 98
original length: 98
drop reason: OVS_DROP_LAST_ACTION
Fix this by initializing ovs_drop_reasons with index.
Fixes: 9d802da40b ("net: openvswitch: add last-action drop reason")
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Tested-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240821123252.186305-1-dongml2@chinatelecom.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch is to move nf_ct_netns_get() out of nf_conncount_init()
and let the consumers of nf_conncount decide if they want to turn
on netfilter conntrack.
It makes nf_conncount more flexible to be used in other places and
avoids netfilter conntrack turned on when using it in openvswitch
conntrack.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Similar to commit 70f06c115b ("sched: act_ct: switch to per-action
label counting"), we should also switch to per-action label counting
in openvswitch conntrack, as Florian suggested.
The difference is that nf_connlabels_get() is called unconditionally
when creating an ct action in ovs_ct_copy_action(). As with these
flows:
table=0,ip,actions=ct(commit,table=1)
table=1,ip,actions=ct(commit,exec(set_field:0xac->ct_label),table=2)
it needs to make sure the label ext is created in the 1st flow before
the ct is committed in ovs_ct_commit(). Otherwise, the warning in
nf_ct_ext_add() when creating the label ext in the 2nd flow will
be triggered:
WARN_ON(nf_ct_is_confirmed(ct));
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/6b9347d5c1a0b364e88d900b29a616c3f8e5b1ca.1723483073.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a packet sample is observed, the sampling rate that was used is
important to estimate the real frequency of such event.
Store the probability of the parent sample action in the skb's cb area
and use it in psample action to pass it down to psample module.
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240704085710.353845-7-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for a new action: psample.
This action accepts a u32 group id and a variable-length cookie and uses
the psample multicast group to make the packet available for
observability.
The maximum length of the user-defined cookie is set to 16, same as
tc_cookie, to discourage using cookies that will not be offloadable.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240704085710.353845-6-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
At this time, conntrack either returns NF_ACCEPT or NF_DROP.
To improve debuging it would be nice to be able to replace NF_DROP
verdict with NF_DROP_REASON() helper,
This helper releases the skb instantly (so drop_monitor can pinpoint
precise location) and returns NF_STOLEN.
Prepare call sites to deal with this before introducing such changes
in conntrack and nat core.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Aaron Conole <aconole@redhat.om>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
e3f02f32a0 ("ionic: fix kernel panic due to multi-buffer handling")
d9c0420999 ("ionic: Mark error paths in the data path as unlikely")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ilya found a failure in running check-kernel tests with at_groups=144
(144: conntrack - FTP SNAT orig tuple) in OVS repo. After his further
investigation, the root cause is that the labels sent to userspace
for related ct are incorrect.
The labels for unconfirmed related ct should use its master's labels.
However, the changes made in commit 8c8b733208 ("openvswitch: set
IPS_CONFIRMED in tmpl status only when commit is set in conntrack")
led to getting labels from this related ct.
So fix it in ovs_ct_get_labels() by changing to copy labels from its
master ct if it is a unconfirmed related ct. Note that there is no
fix needed for ct->mark, as it was already copied from its master
ct for related ct in init_conntrack().
Fixes: 8c8b733208 ("openvswitch: set IPS_CONFIRMED in tmpl status only when commit is set in conntrack")
Reported-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Tested-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 3e2f544dd8 ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.
Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/20240531111552.3209198-2-leitao@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With commit 34d21de99c ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core instead
of this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Move openvswitch driver to leverage the core allocation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240531111552.3209198-1-leitao@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
regression you have been notified of in the past weeks.
The TCP window fix will require some follow-up, already queued.
Current release - regressions:
- af_unix: fix garbage collection of embryos
Previous releases - regressions:
- af_unix: fix race between GC and receive path
- ipv6: sr: fix missing sk_buff release in seg6_input_core
- tcp: remove 64 KByte limit for initial tp->rcv_wnd value
- eth: r8169: fix rx hangup
- eth: lan966x: remove ptp traps in case the ptp is not enabled.
- eth: ixgbe: fix link breakage vs cisco switches.
- eth: ice: prevent ethtool from corrupting the channels.
Previous releases - always broken:
- openvswitch: set the skbuff pkt_type for proper pmtud support.
- tcp: Fix shift-out-of-bounds in dctcp_update_alpha().
Misc:
- a bunch of selftests stabilization patches.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=zd2T
-----END PGP SIGNATURE-----
Merge tag 'net-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Quite smaller than usual. Notably it includes the fix for the unix
regression from the past weeks. The TCP window fix will require some
follow-up, already queued.
Current release - regressions:
- af_unix: fix garbage collection of embryos
Previous releases - regressions:
- af_unix: fix race between GC and receive path
- ipv6: sr: fix missing sk_buff release in seg6_input_core
- tcp: remove 64 KByte limit for initial tp->rcv_wnd value
- eth: r8169: fix rx hangup
- eth: lan966x: remove ptp traps in case the ptp is not enabled
- eth: ixgbe: fix link breakage vs cisco switches
- eth: ice: prevent ethtool from corrupting the channels
Previous releases - always broken:
- openvswitch: set the skbuff pkt_type for proper pmtud support
- tcp: Fix shift-out-of-bounds in dctcp_update_alpha()
Misc:
- a bunch of selftests stabilization patches"
* tag 'net-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (25 commits)
r8169: Fix possible ring buffer corruption on fragmented Tx packets.
idpf: Interpret .set_channels() input differently
ice: Interpret .set_channels() input differently
nfc: nci: Fix handling of zero-length payload packets in nci_rx_work()
net: relax socket state check at accept time.
tcp: remove 64 KByte limit for initial tp->rcv_wnd value
net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe()
tls: fix missing memory barrier in tls_init
net: fec: avoid lock evasion when reading pps_enable
Revert "ixgbe: Manual AN-37 for troublesome link partners for X550 SFI"
testing: net-drv: use stats64 for testing
net: mana: Fix the extra HZ in mana_hwc_send_request
net: lan966x: Remove ptp traps in case the ptp is not enabled.
openvswitch: Set the skbuff pkt_type for proper pmtud support.
selftest: af_unix: Make SCM_RIGHTS into OOB data.
af_unix: Fix garbage collection of embryos carrying OOB with SCM_RIGHTS
tcp: Fix shift-out-of-bounds in dctcp_update_alpha().
selftests/net: use tc rule to filter the na packet
ipv6: sr: fix memleak in seg6_hmac_init_algo
af_unix: Update unix_sk(sk)->oob_skb under sk_receive_queue lock.
...
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
Open vSwitch is originally intended to switch at layer 2, only dealing with
Ethernet frames. With the introduction of l3 tunnels support, it crossed
into the realm of needing to care a bit about some routing details when
making forwarding decisions. If an oversized packet would need to be
fragmented during this forwarding decision, there is a chance for pmtu
to get involved and generate a routing exception. This is gated by the
skbuff->pkt_type field.
When a flow is already loaded into the openvswitch module this field is
set up and transitioned properly as a packet moves from one port to
another. In the case that a packet execute is invoked after a flow is
newly installed this field is not properly initialized. This causes the
pmtud mechanism to omit sending the required exception messages across
the tunnel boundary and a second attempt needs to be made to make sure
that the routing exception is properly setup. To fix this, we set the
outgoing packet's pkt_type to PACKET_OUTGOING, since it can only get
to the openvswitch module via a port device or packet command.
Even for bridge ports as users, the pkt_type needs to be reset when
doing the transmit as the packet is truly outgoing and routing needs
to get involved post packet transformations, in the case of
VXLAN/GENEVE/udp-tunnel packets. In general, the pkt_type on output
gets ignored, since we go straight to the driver, but in the case of
tunnel ports they go through IP routing layer.
This issue is periodically encountered in complex setups, such as large
openshift deployments, where multiple sets of tunnel traversal occurs.
A way to recreate this is with the ovn-heater project that can setup
a networking environment which mimics such large deployments. We need
larger environments for this because we need to ensure that flow
misses occur. In these environment, without this patch, we can see:
./ovn_cluster.sh start
podman exec ovn-chassis-1 ip r a 170.168.0.5/32 dev eth1 mtu 1200
podman exec ovn-chassis-1 ip netns exec sw01p1 ip r flush cache
podman exec ovn-chassis-1 ip netns exec sw01p1 \
ping 21.0.0.3 -M do -s 1300 -c2
PING 21.0.0.3 (21.0.0.3) 1300(1328) bytes of data.
From 21.0.0.3 icmp_seq=2 Frag needed and DF set (mtu = 1142)
--- 21.0.0.3 ping statistics ---
...
Using tcpdump, we can also see the expected ICMP FRAG_NEEDED message is not
sent into the server.
With this patch, setting the pkt_type, we see the following:
podman exec ovn-chassis-1 ip netns exec sw01p1 \
ping 21.0.0.3 -M do -s 1300 -c2
PING 21.0.0.3 (21.0.0.3) 1300(1328) bytes of data.
From 21.0.0.3 icmp_seq=1 Frag needed and DF set (mtu = 1222)
ping: local error: message too long, mtu=1222
--- 21.0.0.3 ping statistics ---
...
In this case, the first ping request receives the FRAG_NEEDED message and
a local routing exception is created.
Tested-by: Jaime Caamano <jcaamano@redhat.com>
Reported-at: https://issues.redhat.com/browse/FDP-164
Fixes: 58264848a5 ("openvswitch: Add vxlan tunneling support.")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20240516200941.16152-1-aconole@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
OVS_PACKET_CMD_EXECUTE has 3 main attributes:
- OVS_PACKET_ATTR_KEY - Packet metadata in a netlink format.
- OVS_PACKET_ATTR_PACKET - Binary packet content.
- OVS_PACKET_ATTR_ACTIONS - Actions to execute on the packet.
OVS_PACKET_ATTR_KEY is parsed first to populate sw_flow_key structure
with the metadata like conntrack state, input port, recirculation id,
etc. Then the packet itself gets parsed to populate the rest of the
keys from the packet headers.
Whenever the packet parsing code starts parsing the ICMPv6 header, it
first zeroes out fields in the key corresponding to Neighbor Discovery
information even if it is not an ND packet.
It is an 'ipv6.nd' field. However, the 'ipv6' is a union that shares
the space between 'nd' and 'ct_orig' that holds the original tuple
conntrack metadata parsed from the OVS_PACKET_ATTR_KEY.
ND packets should not normally have conntrack state, so it's fine to
share the space, but normal ICMPv6 Echo packets or maybe other types of
ICMPv6 can have the state attached and it should not be overwritten.
The issue results in all but the last 4 bytes of the destination
address being wiped from the original conntrack tuple leading to
incorrect packet matching and potentially executing wrong actions
in case this packet recirculates within the datapath or goes back
to userspace.
ND fields should not be accessed in non-ND packets, so not clearing
them should be fine. Executing memset() only for actual ND packets to
avoid the issue.
Initializing the whole thing before parsing is needed because ND packet
may not contain all the options.
The issue only affects the OVS_PACKET_CMD_EXECUTE path and doesn't
affect packets entering OVS datapath from network interfaces, because
in this case CT metadata is populated from skb after the packet is
already parsed.
Fixes: 9dd7f8907c ("openvswitch: Add original direction conntrack tuple to sw_flow_key.")
Reported-by: Antonin Bas <antonin.bas@broadcom.com>
Closes: https://github.com/openvswitch/ovs-issues/issues/327
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20240509094228.1035477-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since kfree_rcu, which is called in the hlist_for_each_entry_rcu traversal
of ovs_ct_limit_exit, is not part of the RCU read critical section, it
is possible that the RCU grace period will pass during the traversal and
the key will be free.
To prevent this, it should be changed to hlist_for_each_entry_safe.
Fixes: 11efd5cb04 ("openvswitch: Support conntrack zone limit")
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/ZiYvzQN/Ry5oeFQW@v4bel-B760M-AORUS-ELITE-AX
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dev_get_by_name will provide a reference on the netdev. So ensure that
the reference of netdev is released after completed.
Fixes: 2540088b83 ("net: openvswitch: Check vport netdev name")
Signed-off-by: Jun Gu <jun.gu@easystack.cn>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/20240423073751.52706-1-jun.gu@easystack.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ensure that the provided netdev name is not one of its aliases to
prevent unnecessary creation and destruction of the vport by
ovs-vswitchd.
Signed-off-by: Jun Gu <jun.gu@easystack.cn>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20240419061425.132723-1-jun.gu@easystack.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On startup, ovs-vswitchd probes different datapath features including
support for timeout policies. While probing, it tries to execute
certain operations with OVS_PACKET_ATTR_PROBE or OVS_FLOW_ATTR_PROBE
attributes set. These attributes tell the openvswitch module to not
log any errors when they occur as it is expected that some of the
probes will fail.
For some reason, setting the timeout policy ignores the PROBE attribute
and logs a failure anyway. This is causing the following kernel log
on each re-start of ovs-vswitchd:
kernel: Failed to associated timeout policy `ovs_test_tp'
Fix that by using the same logging macro that all other messages are
using. The message will still be printed at info level when needed
and will be rate limited, but with a net rate limiter instead of
generic printk one.
The nf_ct_set_timeout() itself will still print some info messages,
but at least this change makes logging in openvswitch module more
consistent.
Fixes: 06bd2bdf19 ("openvswitch: Add timeout support to ct action")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20240403203803.2137962-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
genetlink.h is a shell of what used to be a combined uAPI
and kernel header over a decade ago. It has fewer than
10 lines of code. Merge it into net/genetlink.h.
In some ways it'd be better to keep the combined header
under linux/ but it would make looking through git history
harder.
Acked-by: Sven Eckelmann <sven@narfation.org>
Link: https://lore.kernel.org/r/20240329175710.291749-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only legit reason I could think of for net/genetlink.h
and linux/genetlink.h to be separate would be if one was
included by other headers and we wanted to keep it lightweight.
That is not the case, net/openvswitch/meter.h includes
linux/genetlink.h but for no apparent reason (for struct genl_family
perhaps? it's not necessary, types of externs do not need
to be known).
Link: https://lore.kernel.org/r/20240329175710.291749-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Historically, tunnel flags like TUNNEL_CSUM or TUNNEL_ERSPAN_OPT
have been defined as __be16. Now all of those 16 bits are occupied
and there's no more free space for new flags.
It can't be simply switched to a bigger container with no
adjustments to the values, since it's an explicit Endian storage,
and on LE systems (__be16)0x0001 equals to
(__be64)0x0001000000000000.
We could probably define new 64-bit flags depending on the
Endianness, i.e. (__be64)0x0001 on BE and (__be64)0x00010000... on
LE, but that would introduce an Endianness dependency and spawn a
ton of Sparse warnings. To mitigate them, all of those places which
were adjusted with this change would be touched anyway, so why not
define stuff properly if there's no choice.
Define IP_TUNNEL_*_BIT counterparts as a bit number instead of the
value already coded and a fistful of <16 <-> bitmap> converters and
helpers. The two flags which have a different bit position are
SIT_ISATAP_BIT and VTI_ISVTI_BIT, as they were defined not as
__cpu_to_be16(), but as (__force __be16), i.e. had different
positions on LE and BE. Now they both have strongly defined places.
Change all __be16 fields which were used to store those flags, to
IP_TUNNEL_DECLARE_FLAGS() -> DECLARE_BITMAP(__IP_TUNNEL_FLAG_NUM) ->
unsigned long[1] for now, and replace all TUNNEL_* occurrences to
their bitmap counterparts. Use the converters in the places which talk
to the userspace, hardware (NFP) or other hosts (GRE header). The rest
must explicitly use the new flags only. This must be done at once,
otherwise there will be too many conversions throughout the code in
the intermediate commits.
Finally, disable the old __be16 flags for use in the kernel code
(except for the two 'irregular' flags mentioned above), to prevent
any accidental (mis)use of them. For the userspace, nothing is
changed, only additions were made.
Most noticeable bloat-o-meter difference (.text):
vmlinux: 307/-1 (306)
gre.ko: 62/0 (62)
ip_gre.ko: 941/-217 (724) [*]
ip_tunnel.ko: 390/-900 (-510) [**]
ip_vti.ko: 138/0 (138)
ip6_gre.ko: 534/-18 (516) [*]
ip6_tunnel.ko: 118/-10 (108)
[*] gre_flags_to_tnl_flags() grew, but still is inlined
[**] ip_tunnel_find() got uninlined, hence such decrease
The average code size increase in non-extreme case is 100-200 bytes
per module, mostly due to sizeof(long) > sizeof(__be16), as
%__IP_TUNNEL_FLAG_NUM is less than %BITS_PER_LONG and the compilers
are able to expand the majority of bitmap_*() calls here into direct
operations on scalars.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ovs module allows for some actions to recursively contain an action
list for complex scenarios, such as sampling, checking lengths, etc.
When these actions are copied into the internal flow table, they are
evaluated to validate that such actions make sense, and these calls
happen recursively.
The ovs-vswitchd userspace won't emit more than 16 recursion levels
deep. However, the module has no such limit and will happily accept
limits larger than 16 levels nested. Prevent this by tracking the
number of recursions happening and manually limiting it to 16 levels
nested.
The initial implementation of the sample action would track this depth
and prevent more than 3 levels of recursion, but this was removed to
support the clone use case, rather than limited at the current userspace
limit.
Fixes: 798c166173 ("openvswitch: Optimize sample action for the clone use cases")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240207132416.1488485-2-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Referenced commit doesn't always set iifidx when offloading the flow to
hardware. Fix the following cases:
- nf_conn_act_ct_ext_fill() is called before extension is created with
nf_conn_act_ct_ext_add() in tcf_ct_act(). This can cause rule offload with
unspecified iifidx when connection is offloaded after only single
original-direction packet has been processed by tc data path. Always fill
the new nf_conn_act_ct_ext instance after creating it in
nf_conn_act_ct_ext_add().
- Offloading of unidirectional UDP NEW connections is now supported, but ct
flow iifidx field is not updated when connection is promoted to
bidirectional which can result reply-direction iifidx to be zero when
refreshing the connection. Fill in the extension and update flow iifidx
before calling flow_offload_refresh().
Fixes: 9795ded7f9 ("net/sched: act_ct: Fill offloading tuple iifidx")
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 6a9bad0069 ("net/sched: act_ct: offload UDP NEW connections")
Link: https://lore.kernel.org/r/20231103151410.764271-1-vladbu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/ca5c8049f58bb933f231afd0816e30a5aaa0eddd.1697264974.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct dp_meter.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Pravin B Shelar <pshelar@ovn.org>
Cc: dev@openvswitch.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230922172858.3822653-12-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct dp_meter_instance.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Pravin B Shelar <pshelar@ovn.org>
Cc: dev@openvswitch.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230922172858.3822653-10-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
do_execute_actions() function can be called recursively multiple
times while executing actions that require pipeline forking or
recirculations. It may also be re-entered multiple times if the packet
leaves openvswitch module and re-enters it through a different port.
Currently, there is a 256-byte array allocated on stack in this
function that is supposed to hold NSH header. Compilers tend to
pre-allocate that space right at the beginning of the function:
a88: 48 81 ec b0 01 00 00 sub $0x1b0,%rsp
NSH is not a very common protocol, but the space is allocated on every
recursive call or re-entry multiplying the wasted stack space.
Move the stack allocation to push_nsh() function that is only used
if NSH actions are actually present. push_nsh() is also a simple
function without a possibility for re-entry, so the stack is returned
right away.
With this change the preallocated space is reduced by 256 B per call:
b18: 48 81 ec b0 00 00 00 sub $0xb0,%rsp
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eelco Chaudron echaudro@redhat.com
Reviewed-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 1202cdd66531("Remove DECnet support from kernel") has been
merged, all callers pass in the initial_ref value of 1 when they call
dst_alloc(). Therefore, remove initial_ref when the dst_alloc() is
declared and replace initial_ref with 1 in dst_alloc().
Also when all callers call dst_init(), the value of initial_ref is 1.
Therefore, remove the input parameter initial_ref of the dst_init() and
replace initial_ref with the value 1 in dst_init.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20230911125045.346390-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/sfc/tc.c
fa165e1949 ("sfc: don't unregister flow_indr if it was never registered")
3bf969e88a ("sfc: add MAE table machinery for conntrack table")
https://lore.kernel.org/all/20230818112159.7430e9b4@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recent changes in net-next (commit 759ab1edb5 ("net: store netdevs
in an xarray")) refactored the handling of pre-assigned ifindexes
and let syzbot surface a latent problem in ovs. ovs does not validate
ifindex, making it possible to create netdev ports with negative
ifindex values. It's easy to repro with YNL:
$ ./cli.py --spec netlink/specs/ovs_datapath.yaml \
--do new \
--json '{"upcall-pid": 1, "name":"my-dp"}'
$ ./cli.py --spec netlink/specs/ovs_vport.yaml \
--do new \
--json '{"upcall-pid": "00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":4294901760,"type":2}'
$ ip link show
-65536: some-port0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 7a:48:21:ad:0b:fb brd ff:ff:ff:ff:ff:ff
...
Validate the inputs. Now the second command correctly returns:
$ ./cli.py --spec netlink/specs/ovs_vport.yaml \
--do new \
--json '{"upcall-pid": "00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":4294901760,"type":2}'
lib.ynl.NlError: Netlink error: Numerical result out of range
nl_len = 108 (92) nl_flags = 0x300 nl_type = 2
error: -34 extack: {'msg': 'integer out of range', 'unknown': [[type:4 len:36] b'\x0c\x00\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00\x0c\x00\x03\x00\xff\xff\xff\x7f\x00\x00\x00\x00\x08\x00\x01\x00\x08\x00\x00\x00'], 'bad-attr': '.ifindex'}
Accept 0 since it used to be silently ignored.
Fixes: 54c4ef34c4 ("openvswitch: allow specifying ifindex of new interfaces")
Reported-by: syzbot+7456b5dcf65111553320@syzkaller.appspotmail.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/20230814203840.2908710-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Only three families use info->userhdr today and going forward
we discourage using fixed headers in new families.
So having the pointer to user header in struct genl_info
is an overkill. Compute the header pointer at runtime.
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/20230814214723.2924989-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use drop reasons from include/net/dropreason-core.h when a reasonable
candidate exists.
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
By using an independent drop reason it makes it easy to distinguish
between QoS-triggered or flow-triggered drop.
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
From: Eric Garver <eric@garver.life>
This adds an explicit drop action. This is used by OVS to drop packets
for which it cannot determine what to do. An explicit action in the
kernel allows passing the reason _why_ the packet is being dropped or
zero to indicate no particular error happened (i.e: OVS intentionally
dropped the packet).
Since the error codes coming from userspace mean nothing for the kernel,
we squash all of them into only two drop reasons:
- OVS_DROP_EXPLICIT_WITH_ERROR to indicate a non-zero value was passed
- OVS_DROP_EXPLICIT to indicate a zero value was passed (no error)
e.g. trace all OVS dropped skbs
# perf trace -e skb:kfree_skb --filter="reason >= 0x30000"
[..]
106.023 ping/2465 skb:kfree_skb(skbaddr: 0xffffa0e8765f2000, \
location:0xffffffffc0d9b462, protocol: 2048, reason: 196611)
reason: 196611 --> 0x30003 (OVS_DROP_EXPLICIT)
Also, this patch allows ovs-dpctl.py to add explicit drop actions as:
"drop" -> implicit empty-action drop
"drop(0)" -> explicit non-error action drop
"drop(42)" -> explicit error action drop
Signed-off-by: Eric Garver <eric@garver.life>
Co-developed-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a drop reason for packets that are dropped because an action
returns a non-zero error code.
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Create a new drop reason subsystem for openvswitch and add the first
drop reason to represent last-action drops.
Last-action drops happen when a flow has an empty action list or there
is no action that consumes the packet (output, userspace, recirc, etc).
It is the most common way in which OVS drops packets.
Implementation-wise, most of these skb-consuming actions already call
"consume_skb" internally and return directly from within the
do_execute_actions() loop so with minimal changes we can assume that
any skb that exits the loop normally is a packet drop.
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
By not setting IPS_CONFIRMED in tmpl that allows the exp not to be removed
from the hashtable when lookup, we can simplify the exp processing code a
lot in openvswitch conntrack.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since its introduction, the ovs module execute_hash action allowed
hash algorithms other than the skb->l4_hash to be used. However,
additional hash algorithms were not implemented. This means flows
requiring different hash distributions weren't able to use the
kernel datapath.
Now, introduce support for symmetric hashing algorithm as an
alternative hash supported by the ovs module using the flow
dissector.
Output of flow using l4_sym hash:
recirc_id(0),in_port(3),eth(),eth_type(0x0800),
ipv4(dst=64.0.0.0/192.0.0.0,proto=6,frag=no), packets:30473425,
bytes:45902883702, used:0.000s, flags:SP.,
actions:hash(sym_l4(0)),recirc(0xd)
Some performance testing with no GRO/GSO, two veths, single flow:
hash(l4(0)): 4.35 GBits/s
hash(l4_sym(0)): 4.24 GBits/s
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move declarations into include/net/gso.h and code into net/core/gso.c
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230608191738.3947077-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/sch_taprio.c
d636fc5dd6 ("net: sched: add rcu annotations around qdisc->qdisc_sleeping")
dced11ef84 ("net/sched: taprio: don't overwrite "sch" variable in taprio_dump_class_stats()")
net/ipv4/sysctl_net_ipv4.c
e209fee411 ("net/ipv4: ping_group_range: allow GID from 2147483648 to 4294967294")
ccce324dab ("tcp: make the first N SYN RTO backoffs linear")
https://lore.kernel.org/all/20230605100816.08d41a7b@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the per cpu upcall counters are allocated after the vport is
created and inserted into the system. This could lead to the datapath
accessing the counters before they are allocated resulting in a kernel
Oops.
Here is an example:
PID: 59693 TASK: ffff0005f4f51500 CPU: 0 COMMAND: "ovs-vswitchd"
#0 [ffff80000a39b5b0] __switch_to at ffffb70f0629f2f4
#1 [ffff80000a39b5d0] __schedule at ffffb70f0629f5cc
#2 [ffff80000a39b650] preempt_schedule_common at ffffb70f0629fa60
#3 [ffff80000a39b670] dynamic_might_resched at ffffb70f0629fb58
#4 [ffff80000a39b680] mutex_lock_killable at ffffb70f062a1388
#5 [ffff80000a39b6a0] pcpu_alloc at ffffb70f0594460c
#6 [ffff80000a39b750] __alloc_percpu_gfp at ffffb70f05944e68
#7 [ffff80000a39b760] ovs_vport_cmd_new at ffffb70ee6961b90 [openvswitch]
...
PID: 58682 TASK: ffff0005b2f0bf00 CPU: 0 COMMAND: "kworker/0:3"
#0 [ffff80000a5d2f40] machine_kexec at ffffb70f056a0758
#1 [ffff80000a5d2f70] __crash_kexec at ffffb70f057e2994
#2 [ffff80000a5d3100] crash_kexec at ffffb70f057e2ad8
#3 [ffff80000a5d3120] die at ffffb70f0628234c
#4 [ffff80000a5d31e0] die_kernel_fault at ffffb70f062828a8
#5 [ffff80000a5d3210] __do_kernel_fault at ffffb70f056a31f4
#6 [ffff80000a5d3240] do_bad_area at ffffb70f056a32a4
#7 [ffff80000a5d3260] do_translation_fault at ffffb70f062a9710
#8 [ffff80000a5d3270] do_mem_abort at ffffb70f056a2f74
#9 [ffff80000a5d32a0] el1_abort at ffffb70f06297dac
#10 [ffff80000a5d32d0] el1h_64_sync_handler at ffffb70f06299b24
#11 [ffff80000a5d3410] el1h_64_sync at ffffb70f056812dc
#12 [ffff80000a5d3430] ovs_dp_upcall at ffffb70ee6963c84 [openvswitch]
#13 [ffff80000a5d3470] ovs_dp_process_packet at ffffb70ee6963fdc [openvswitch]
#14 [ffff80000a5d34f0] ovs_vport_receive at ffffb70ee6972c78 [openvswitch]
#15 [ffff80000a5d36f0] netdev_port_receive at ffffb70ee6973948 [openvswitch]
#16 [ffff80000a5d3720] netdev_frame_hook at ffffb70ee6973a28 [openvswitch]
#17 [ffff80000a5d3730] __netif_receive_skb_core.constprop.0 at ffffb70f06079f90
We moved the per cpu upcall counter allocation to the existing vport
alloc and free functions to solve this.
Fixes: 95637d91fe ("net: openvswitch: release vport resources on failure")
Fixes: 1933ea365a ("net: openvswitch: Add support to count upcall packets")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
assume the following setup on a single machine:
1. An openvswitch instance with one bridge and default flows
2. two network namespaces "server" and "client"
3. two ovs interfaces "server" and "client" on the bridge
4. for each ovs interface a veth pair with a matching name and 32 rx and
tx queues
5. move the ends of the veth pairs to the respective network namespaces
6. assign ip addresses to each of the veth ends in the namespaces (needs
to be the same subnet)
7. start some http server on the server network namespace
8. test if a client in the client namespace can reach the http server
when following the actions below the host has a chance of getting a cpu
stuck in a infinite loop:
1. send a large amount of parallel requests to the http server (around
3000 curls should work)
2. in parallel delete the network namespace (do not delete interfaces or
stop the server, just kill the namespace)
there is a low chance that this will cause the below kernel cpu stuck
message. If this does not happen just retry.
Below there is also the output of bpftrace for the functions mentioned
in the output.
The series of events happening here is:
1. the network namespace is deleted calling
`unregister_netdevice_many_notify` somewhere in the process
2. this sets first `NETREG_UNREGISTERING` on both ends of the veth and
then runs `synchronize_net`
3. it then calls `call_netdevice_notifiers` with `NETDEV_UNREGISTER`
4. this is then handled by `dp_device_event` which calls
`ovs_netdev_detach_dev` (if a vport is found, which is the case for
the veth interface attached to ovs)
5. this removes the rx_handlers of the device but does not prevent
packages to be sent to the device
6. `dp_device_event` then queues the vport deletion to work in
background as a ovs_lock is needed that we do not hold in the
unregistration path
7. `unregister_netdevice_many_notify` continues to call
`netdev_unregister_kobject` which sets `real_num_tx_queues` to 0
8. port deletion continues (but details are not relevant for this issue)
9. at some future point the background task deletes the vport
If after 7. but before 9. a packet is send to the ovs vport (which is
not deleted at this point in time) which forwards it to the
`dev_queue_xmit` flow even though the device is unregistering.
In `skb_tx_hash` (which is called in the `dev_queue_xmit`) path there is
a while loop (if the packet has a rx_queue recorded) that is infinite if
`dev->real_num_tx_queues` is zero.
To prevent this from happening we update `do_output` to handle devices
without carrier the same as if the device is not found (which would
be the code path after 9. is done).
Additionally we now produce a warning in `skb_tx_hash` if we will hit
the infinite loop.
bpftrace (first word is function name):
__dev_queue_xmit server: real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1
netdev_core_pick_tx server: addr: 0xffff9f0a46d4a000 real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 2, reg_state: 1
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 6, reg_state: 2
ovs_netdev_detach_dev server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, reg_state: 2
netdev_rx_handler_unregister server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
netdev_rx_handler_unregister ret server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 27, reg_state: 2
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 22, reg_state: 2
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 18, reg_state: 2
netdev_unregister_kobject: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
ovs_vport_send server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2
__dev_queue_xmit server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2
netdev_core_pick_tx server: addr: 0xffff9f0a46d4a000 real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2
broken device server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024
ovs_dp_detach_port server: real_num_tx_queues: 0 cpu 9, pid: 9124, tid: 9124, reg_state: 2
synchronize_rcu_expedited: cpu 9, pid: 33604, tid: 33604
stuck message:
watchdog: BUG: soft lockup - CPU#5 stuck for 26s! [curl:1929279]
Modules linked in: veth pktgen bridge stp llc ip_set_hash_net nft_counter xt_set nft_compat nf_tables ip_set_hash_ip ip_set nfnetlink_cttimeout nfnetlink openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 tls binfmt_misc nls_iso8859_1 input_leds joydev serio_raw dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua sch_fq_codel drm efi_pstore virtio_rng ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel virtio_net ahci net_failover crypto_simd cryptd psmouse libahci virtio_blk failover
CPU: 5 PID: 1929279 Comm: curl Not tainted 5.15.0-67-generic #74-Ubuntu
Hardware name: OpenStack Foundation OpenStack Nova, BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:netdev_pick_tx+0xf1/0x320
Code: 00 00 8d 48 ff 0f b7 c1 66 39 ca 0f 86 e9 01 00 00 45 0f b7 ff 41 39 c7 0f 87 5b 01 00 00 44 29 f8 41 39 c7 0f 87 4f 01 00 00 <eb> f2 0f 1f 44 00 00 49 8b 94 24 28 04 00 00 48 85 d2 0f 84 53 01
RSP: 0018:ffffb78b40298820 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffff9c8773adc2e0 RCX: 000000000000083f
RDX: 0000000000000000 RSI: ffff9c8773adc2e0 RDI: ffff9c870a25e000
RBP: ffffb78b40298858 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff9c870a25e000
R13: ffff9c870a25e000 R14: ffff9c87fe043480 R15: 0000000000000000
FS: 00007f7b80008f00(0000) GS:ffff9c8e5f740000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7b80f6a0b0 CR3: 0000000329d66000 CR4: 0000000000350ee0
Call Trace:
<IRQ>
netdev_core_pick_tx+0xa4/0xb0
__dev_queue_xmit+0xf8/0x510
? __bpf_prog_exit+0x1e/0x30
dev_queue_xmit+0x10/0x20
ovs_vport_send+0xad/0x170 [openvswitch]
do_output+0x59/0x180 [openvswitch]
do_execute_actions+0xa80/0xaa0 [openvswitch]
? kfree+0x1/0x250
? kfree+0x1/0x250
? kprobe_perf_func+0x4f/0x2b0
? flow_lookup.constprop.0+0x5c/0x110 [openvswitch]
ovs_execute_actions+0x4c/0x120 [openvswitch]
ovs_dp_process_packet+0xa1/0x200 [openvswitch]
? ovs_ct_update_key.isra.0+0xa8/0x120 [openvswitch]
? ovs_ct_fill_key+0x1d/0x30 [openvswitch]
? ovs_flow_key_extract+0x2db/0x350 [openvswitch]
ovs_vport_receive+0x77/0xd0 [openvswitch]
? __htab_map_lookup_elem+0x4e/0x60
? bpf_prog_680e8aff8547aec1_kfree+0x3b/0x714
? trace_call_bpf+0xc8/0x150
? kfree+0x1/0x250
? kfree+0x1/0x250
? kprobe_perf_func+0x4f/0x2b0
? kprobe_perf_func+0x4f/0x2b0
? __mod_memcg_lruvec_state+0x63/0xe0
netdev_port_receive+0xc4/0x180 [openvswitch]
? netdev_port_receive+0x180/0x180 [openvswitch]
netdev_frame_hook+0x1f/0x40 [openvswitch]
__netif_receive_skb_core.constprop.0+0x23d/0xf00
__netif_receive_skb_one_core+0x3f/0xa0
__netif_receive_skb+0x15/0x60
process_backlog+0x9e/0x170
__napi_poll+0x33/0x180
net_rx_action+0x126/0x280
? ttwu_do_activate+0x72/0xf0
__do_softirq+0xd9/0x2e7
? rcu_report_exp_cpu_mult+0x1b0/0x1b0
do_softirq+0x7d/0xb0
</IRQ>
<TASK>
__local_bh_enable_ip+0x54/0x60
ip_finish_output2+0x191/0x460
__ip_finish_output+0xb7/0x180
ip_finish_output+0x2e/0xc0
ip_output+0x78/0x100
? __ip_finish_output+0x180/0x180
ip_local_out+0x5e/0x70
__ip_queue_xmit+0x184/0x440
? tcp_syn_options+0x1f9/0x300
ip_queue_xmit+0x15/0x20
__tcp_transmit_skb+0x910/0x9c0
? __mod_memcg_state+0x44/0xa0
tcp_connect+0x437/0x4e0
? ktime_get_with_offset+0x60/0xf0
tcp_v4_connect+0x436/0x530
__inet_stream_connect+0xd4/0x3a0
? kprobe_perf_func+0x4f/0x2b0
? aa_sk_perm+0x43/0x1c0
inet_stream_connect+0x3b/0x60
__sys_connect_file+0x63/0x70
__sys_connect+0xa6/0xd0
? setfl+0x108/0x170
? do_fcntl+0xe8/0x5a0
__x64_sys_connect+0x18/0x20
do_syscall_64+0x5c/0xc0
? __x64_sys_fcntl+0xa9/0xd0
? exit_to_user_mode_prepare+0x37/0xb0
? syscall_exit_to_user_mode+0x27/0x50
? do_syscall_64+0x69/0xc0
? __sys_setsockopt+0xea/0x1e0
? exit_to_user_mode_prepare+0x37/0xb0
? syscall_exit_to_user_mode+0x27/0x50
? __x64_sys_setsockopt+0x1f/0x30
? do_syscall_64+0x69/0xc0
? irqentry_exit+0x1d/0x30
? exc_page_fault+0x89/0x170
entry_SYSCALL_64_after_hwframe+0x61/0xcb
RIP: 0033:0x7f7b8101c6a7
Code: 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 18 89 54 24 0c 48 89 34 24 89
RSP: 002b:00007ffffd6b2198 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7b8101c6a7
RDX: 0000000000000010 RSI: 00007ffffd6b2360 RDI: 0000000000000005
RBP: 0000561f1370d560 R08: 00002795ad21d1ac R09: 0030312e302e302e
R10: 00007ffffd73f080 R11: 0000000000000246 R12: 0000561f1370c410
R13: 0000000000000000 R14: 0000000000000005 R15: 0000000000000000
</TASK>
Fixes: 7f8a436eaa ("openvswitch: Add conntrack action")
Co-developed-by: Luca Czesla <luca.czesla@mail.schwarz>
Signed-off-by: Luca Czesla <luca.czesla@mail.schwarz>
Signed-off-by: Felix Huettner <felix.huettner@mail.schwarz>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/ZC0pBXBAgh7c76CA@kernel-bug-kernel-bug
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most notable is a set of zlib changes from Mikhail Zaslonko which enhances
and fixes zlib's use of S390 hardware support: "lib/zlib: Set of s390
DFLTCC related patches for kernel zlib".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/QC4QAKCRDdBJ7gKXxA
jtKdAQCbDCBdY8H45d1fONzQW2UDqCPnOi77MpVUxGL33r+1SAEA807C7rvDEmlf
yP1Ft+722fFU5jogVU8ZFh+vapv2/gI=
=Q9YK
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-02-20-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"There is no particular theme here - mainly quick hits all over the
tree.
Most notable is a set of zlib changes from Mikhail Zaslonko which
enhances and fixes zlib's use of S390 hardware support: 'lib/zlib: Set
of s390 DFLTCC related patches for kernel zlib'"
* tag 'mm-nonmm-stable-2023-02-20-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (55 commits)
Update CREDITS file entry for Jesper Juhl
sparc: allow PM configs for sparc32 COMPILE_TEST
hung_task: print message when hung_task_warnings gets down to zero.
arch/Kconfig: fix indentation
scripts/tags.sh: fix the Kconfig tags generation when using latest ctags
nilfs2: prevent WARNING in nilfs_dat_commit_end()
lib/zlib: remove redundation assignement of avail_in dfltcc_gdht()
lib/Kconfig.debug: do not enable DEBUG_PREEMPT by default
lib/zlib: DFLTCC always switch to software inflate for Z_PACKET_FLUSH option
lib/zlib: DFLTCC support inflate with small window
lib/zlib: Split deflate and inflate states for DFLTCC
lib/zlib: DFLTCC not writing header bits when avail_out == 0
lib/zlib: fix DFLTCC ignoring flush modes when avail_in == 0
lib/zlib: fix DFLTCC not flushing EOBS when creating raw streams
lib/zlib: implement switching between DFLTCC and software
lib/zlib: adjust offset calculation for dfltcc_state
nilfs2: replace WARN_ONs for invalid DAT metadata block requests
scripts/spelling.txt: add "exsits" pattern and fix typo instances
fs: gracefully handle ->get_block not mapping bh in __mpage_writepage
cramfs: Kconfig: fix spelling & punctuation
...
For drivers to support partial offload of a filter's action list,
add support for action miss to specify an action instance to
continue from in sw.
CT action in particular can't be fully offloaded, as new connections
need to be handled in software. This imposes other limitations on
the actions that can be offloaded together with the CT action, such
as packet modifications.
Assign each action on a filter's action list a unique miss_cookie
which drivers can then use to fill action_miss part of the tc skb
extension. On getting back this miss_cookie, find the action
instance with relevant cookie and continue classifying from there.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
old_meter needs to be free after it is detached regardless of whether
the new meter is successfully attached.
Fixes: c7c4c44c9a ("net: openvswitch: expand the meters supported number")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now handle_fragments() in OVS and TC have the similar code, and
this patch removes the duplicate code by moving the function
to nf_conntrack_ovs.
Note that skb_clear_hash(skb) or skb->ignore_df = 1 should be
done only when defrag returns 0, as it does in other places
in kernel.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch has no functional changes and just moves key and ovs_cb update
out of handle_fragments, and skb_clear_hash() and skb->ignore_df change
into handle_fragments(), to make it easier to move the duplicate code
from handle_fragments() into nf_conntrack_ovs later.
Note that it changes to pass info->family to handle_fragments() instead
of key for the packet type check, as info->family is set according to
key->eth.type in ovs_ct_copy_action() when creating the action.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are almost the same code in ovs_skb_network_trim() and
tcf_ct_skb_network_trim(), this patch extracts them into a function
nf_ct_skb_network_trim() and moves the function to nf_conntrack_ovs.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to nf_nat_ovs created by Commit ebddb14049 ("net: move the
nat function to nf_nat_ovs for ovs and tc"), this patch is to create
nf_conntrack_ovs to get these functions shared by OVS and TC only.
There are nf_ct_helper() and nf_ct_add_helper() from nf_conntrak_helper
in this patch, and will be more in the following patches.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use string_is_terminated() helper instead of cpecific memchr() call.
This shows better the intention of the call.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230208133153.22528-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use actual CPU number instead of hardcoded value to decide the size
of 'cpu_used_mask' in 'struct sw_flow'. Below is the reason.
'struct cpumask cpu_used_mask' is embedded in struct sw_flow.
Its size is hardcoded to CONFIG_NR_CPUS bits, which can be
8192 by default, it costs memory and slows down ovs_flow_alloc.
To address this:
Redefine cpu_used_mask to pointer.
Append cpumask_size() bytes after 'stat' to hold cpumask.
Initialization cpu_used_mask right after stats_last_writer.
APIs like cpumask_next and cpumask_set_cpu never access bits
beyond cpu count, cpumask_size() bytes of memory is enough.
Signed-off-by: Eddy Tao <taoyuan_eddy@hotmail.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/OS3P286MB229570CCED618B20355D227AF5D59@OS3P286MB2295.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPv4 GSO packets may get processed in ovs_skb_network_trim(),
and we need to use skb_ip_totlen() to get iph totlen.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A recent commit introducing upcall packet accounting failed to properly
release the vport object when the per-cpu stats struct couldn't be
allocated. This can cause dangling pointers to dp objects long after
they've been released.
Cc: wangchuanlei <wangchuanlei@inspur.com>
Fixes: 1933ea365a ("net: openvswitch: Add support to count upcall packets")
Reported-by: syzbot+8f4e2dcfcb3209ac35f9@syzkaller.appspotmail.com
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://lore.kernel.org/r/20221220212717.526780-1-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit mentioned below causes the ovs_flow_tbl_lookup() function
to be called with the masked key. However, it's supposed to be called
with the unmasked key. This due to the fact that the datapath supports
installing wider flows, and OVS relies on this behavior. For example
if ipv4(src=1.1.1.1/192.0.0.0, dst=1.1.1.2/192.0.0.0) exists, a wider
flow (smaller mask) of ipv4(src=192.1.1.1/128.0.0.0,dst=192.1.1.2/
128.0.0.0) is allowed to be added.
However, if we try to add a wildcard rule, the installation fails:
$ ovs-appctl dpctl/add-flow system@myDP "in_port(1),eth_type(0x0800), \
ipv4(src=1.1.1.1/192.0.0.0,dst=1.1.1.2/192.0.0.0,frag=no)" 2
$ ovs-appctl dpctl/add-flow system@myDP "in_port(1),eth_type(0x0800), \
ipv4(src=192.1.1.1/0.0.0.0,dst=49.1.1.2/0.0.0.0,frag=no)" 2
ovs-vswitchd: updating flow table (File exists)
The reason is that the key used to determine if the flow is already
present in the system uses the original key ANDed with the mask.
This results in the IP address not being part of the (miniflow) key,
i.e., being substituted with an all-zero value. When doing the actual
lookup, this results in the key wrongfully matching the first flow,
and therefore the flow does not get installed.
This change reverses the commit below, but rather than having the key
on the stack, it's allocated.
Fixes: 190aa3e778 ("openvswitch: Fix Frame-size larger than 1024 bytes warning.")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two nat functions are nearly the same in both OVS and
TC code, (ovs_)ct_nat_execute() and ovs_ct_nat/tcf_ct_act_nat().
This patch creates nf_nat_ovs.c under netfilter and moves them
there then exports nf_ct_nat() so that it can be shared by both
OVS and TC, and keeps the nat (type) check and nat flag update
in OVS and TC's own place, as these parts are different between
OVS and TC.
Note that in OVS nat function it was using skb->protocol to get
the proto as it already skips vlans in key_extract(), while it
doesn't in TC, and TC has to call skb_protocol() to get proto.
So in nf_ct_nat_execute(), we keep using skb_protocol() which
works for both OVS and TC contrack.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When it fails to allocate nat ext, the packet should be dropped, like
the memory allocation failures in other places in ovs_ct_nat().
This patch changes to return NF_DROP when fails to add nat ext before
doing NAT in ovs_ct_nat(), also it would keep consistent with tc
action ct' processing in tcf_ct_act_nat().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Either OVS_CT_SRC_NAT or OVS_CT_DST_NAT is set, OVS_CT_NAT must be
set in info->nat. Thus, if OVS_CT_NAT is not set in info->nat, it
will definitely not do NAT but returns NF_ACCEPT in ovs_ct_nat().
This patch changes nothing funcational but only makes this return
earlier in ovs_ct_nat() to keep consistent with TC's processing
in tcf_ct_act_nat().
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The calls to ovs_ct_nat_execute() are as below:
ovs_ct_execute()
ovs_ct_lookup()
__ovs_ct_lookup()
ovs_ct_nat()
ovs_ct_nat_execute()
ovs_ct_commit()
__ovs_ct_lookup()
ovs_ct_nat()
ovs_ct_nat_execute()
and since skb_pull_rcsum() and skb_push_rcsum() are already
called in ovs_ct_execute(), there's no need to do it again
in ovs_ct_nat_execute().
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to count upall packets, when kmod of openvswitch
upcall to count the number of packets for upcall succeed and
failed, which is a better way to see how many packets upcalled
on every interfaces.
Signed-off-by: wangchuanlei <wangchuanlei@inspur.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
nf_conn:mark can be read from and written to in parallel. Use
READ_ONCE()/WRITE_ONCE() for reads and writes to prevent unwanted
compiler optimizations.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Move ovs_ct_add_helper from openvswitch to nf_conntrack_helper and
rename as nf_ct_add_helper, so that it can be used in TC act_ct in
the next patch.
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
