The current code does not provide any link-configuration support
for 4-address mode WDS AP_VLAN interfaces in MLO setups, preventing
MLD stations from being added correctly. Add the required handling
to enable proper integration of 4-address WDS stations into
an MLO environment.
When a 4-address station associates with an MLO AP, compute the
intersection of valid links between the master AP interface and
the station's advertised capabilities. Configure the AP_VLAN interface
with only these common links to ensure correct data-path operation.
This update ensures AP_VLAN interfaces correctly track link-state
transitions and maintain consistent addressing across all active MLO links.
Co-developed-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Signed-off-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com>
Link: https://patch.msgid.link/20260326164723.553927-2-tamizh.raja@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A NAN local schedule consist of a list of NAN channels, and an array
that maps time slots to the channel it is scheduled to (or NULL to indicate
unscheduled).
A NAN channel is the configuration of a channel which is used for NAN
operations. It is a new type of chanctx user (before, the only user is a
link). A NAN channel may not have a chanctx assigned if it is ULWed out.
A NAN channel may or may not be scheduled (for example, user space
may want to prepare the resources before the actual schedule is
configured).
Add management of the NAN local schedule.
Since we introduce a new chanctx user, also adjust the different
for_each_chanctx_user_* macros to visit also the NAN channels and take
those into account.
Co-developed-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260326121156.03350fd40630.Id158f815cfc9b5ab1ebdb8ee608bda426e4d7474@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- cfg80211: new APIs for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
- mt76:
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- iwlwifi: UNII-9 and continuing UHR work
-----BEGIN PGP SIGNATURE-----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=zap4
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-03-26' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
A fairly big set of changes all over, notably with:
- cfg80211: new APIs for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
- mt76:
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- iwlwifi: UNII-9 and continuing UHR work
* tag 'wireless-next-2026-03-26' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (230 commits)
wifi: mac80211: ignore reserved bits in reconfiguration status
wifi: cfg80211: allow protected action frame TX for NAN
wifi: ieee80211: Add some missing NAN definitions
wifi: nl80211: Add a notification to notify NAN channel evacuation
wifi: nl80211: add NL80211_CMD_NAN_ULW_UPDATE notification
wifi: nl80211: allow reporting spurious NAN Data frames
wifi: cfg80211: allow ToDS=0/FromDS=0 data frames on NAN data interfaces
wifi: nl80211: define an API for configuring the NAN peer's schedule
wifi: nl80211: add support for NAN stations
wifi: cfg80211: separately store HT, VHT and HE capabilities for NAN
wifi: cfg80211: add support for NAN data interface
wifi: cfg80211: make sure NAN chandefs are valid
wifi: cfg80211: Add an API to configure local NAN schedule
wifi: mac80211: cleanup error path of ieee80211_do_open
wifi: mac80211: extract channel logic from link logic
wifi: iwlwifi: mld: set RX_FLAG_RADIOTAP_TLV_AT_END generically
wifi: iwlwifi: reduce the number of prints upon firmware crash
wifi: iwlwifi: fix the description of SESSION_PROTECTION_CMD
wifi: iwlwifi: mld: introduce iwl_mld_vif_fw_id_valid
wifi: iwlwifi: mld: block EMLSR during TDLS connections
...
====================
Link: https://patch.msgid.link/20260326152021.305959-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This new interface type represents a NAN data interface (NDI).
It is used for data communication with NAN peers.
Note that the existing NL80211_IFTYPE_NAN interface, which is the NAN
Management Interface (NMI), is used for management communication.
An NDI interface is started when a new NAN data path is about to
be established, and is stopped after the NAN data path is terminated.
- An NDI interface can only be started if the NMI is running, and NAN is
started.
- Before the NMI is stopped, the NDI interfaces will be stopped.
Add the new interface type, handle add/remove operations for it,
and makes sure of the conditions above.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.0d681335c2e2.I92973483e927820ae2297853c141842fdb262747@changeid
Link: https://patch.msgid.link/20260318123926.206536-4-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The logic that tries to reuse an existing chanctx or create a new one if
such doesn't exist will be used for other types of chanctx users.
Extract this logic from _ieee80211_link_use_channel.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260325154550.9a08397a7590.Id24934d14f240f8d38a23f3b1786235bac0b3e60@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently we have only one user for a channel context: the link.
With NAN, a new type of the channel context user will be added - the NAN
channel.
To prepare for this, we need to separate the channel context code from
the link code.
Removes the link argument from ieee80211_find_chanctx. Since the issue that led
to commit 5e0c422d12 ("wifi: mac80211: reserve chanctx during find") - that
added the link argument - is relevant for any user of the channel context, add
a boolean to the chanctx itself, indicating that the chanctx is in the process
of getting used.
When this indication is set, the reference count of the channel context
will be incremented by one, so even if it is getting released from a link
(or another user) it won't be freed.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260320101954.232499e2a41f.I0b735a607e1ec7aa5749ab01c794ef99dbe82b7f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
for_each_chanctx_user_* is an iterator that visits all types of chanctx
users, including the (to be added) NAN channels, and not only the link.
ieee80211_get_chanctx_max_required_bw wasn't changed to use this new
iterator, do it now.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260320101556.4691916c7877.I9660f3945f4dccdb6d41a06ec4e74161e5ac65a4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For NPCA, we need to treat the channel request differently
for AP and other interfaces (APs can share NPCA, under the
assumption that userspace will set them up with the same
BSS color.) This is difficult if we have to check against
a chanreq made up from the chanctx, but this isn't a code
path that needs to be highly optimised, so just always use
the (originally) recheck functionality to check against
all users of the chanctx.
Link: https://patch.msgid.link/20260303152641.1a3ff6ead82b.I486f1a94b9a32e0b045815cbbb22679c8cef56e4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_chan_bw_change() iterates all stations and accesses
link->reserved.oper via sta->sdata->link[link_id]. For stations on
AP_VLAN interfaces (e.g. 4addr WDS clients), sta->sdata points to
the VLAN sdata, whose link never participates in chanctx reservations.
This leaves link->reserved.oper zero-initialized with chan == NULL,
causing a NULL pointer dereference in __ieee80211_sta_cap_rx_bw()
when accessing chandef->chan->band during CSA.
Resolve the VLAN sdata to its parent AP sdata using get_bss_sdata()
before accessing link data.
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20260305170812.2904208-1-nbd@nbd.name
[also change sta->sdata in ARRAY_SIZE even if it doesn't matter]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
for_each_chanctx_user_* was introdcued as a replacement for
for_each_sdata_link, which visits also other chanctx users that are not
link.
for_each_sdata_link skips not running interfaces, do the same for
for_each_chanctx_user_*
Fixes: 1ce954c98b ("wifi: mac80211: add and use chanctx usage iteration")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260107143736.55c084e2a976.I38b7b904a135dadca339321923b501b2c2c5c8c0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Introduce support for sharing identical channel contexts for S1G
interfaces. Additionally, do not downgrade channel requests for
S1G interfaces.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20251126015758.149034-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
My prior commit here introduced a bug due to copy/paste,
it was iterating the links assigned to 'ctx->replace_ctx'
and I replaced it by iterating links assigned to 'ctx' by
accident, then modified it for the iteration later.
Fix it to iterate the users of the correct chanctx, i.e.
'ctx->replace_ctx'.
Ultimately, this issue led to a crash in a hwsim test
(multi_ap_wps_shared_apdev_csa) because it would actually
do the switch (rather than refuse here) and then later
have a double-free of the original chanctx, because it
was still in use by another interface yet freed as part
of the switching.
Fixes: a1dc648aa7 ("wifi: mac80211: remove chanctx to link back-references")
Link: https://patch.msgid.link/20251121113733.7710a58d45eb.Ie9ec010b52b1baed93dbe44f968c2119b6b5d98d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In preparation for NAN interfaces using multiple channel
contexts, add an iterator macro that iterates all users
of a given channel context.
The logic during reserved assign/reassign handling the
bandwidth in ieee80211_get_chanctx_max_required_bw() is
a bit more complicated and should be cleaned up, so it
isn't yet converted.
Link: https://patch.msgid.link/20251105160431.5aaccc2f127d.I2b7fd0858a263916f43abab49c6d3cc0b5aa16ec@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Each link can currently use a chanctx and have another one
reserved, and both of these are also tracked backwards in
the assigned_links and reserved_links lists. If we consider
that there aren't *that* many links, this duplicate book-
keeping isn't necessary.
(I think it used to be necessary before the wiphy locking
changes, when chanctx_mtx existed, because we couldn't do
any interface iterations while holding only chanctx_mtx.)
Additionally, for NAN, we're going to want to track which
chanctxs are in use by the (group of) NAN interfaces. For
those, links don't really make sense as such, so chanctxs
need to be assigned to a different data structure.
Thus, as a first step, remove those back-lists of users
(right now only links) of each channel context. This is a
very basic conversion, ieee80211_vif_use_reserved_switch()
should made to iterate smarter.
Link: https://patch.msgid.link/20251105160431.dbeea1c42e76.I8d273c407274e1c05a4778aa20b56a9f326e87a7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The work item may be scheduled relatively far in the future. As the
event happens at a specific point in time, the normal timer accuracy is
not sufficient in that case.
Switch to use wiphy_hrtimer_work so that the accuracy is sufficient. To
make this work, use the same clock to store the timestamp.
CC: stable@vger.kernel.org
Fixes: ec3252bff7 ("wifi: mac80211: use wiphy work for channel switch")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251028125710.68258c7e4ac4.I4ff2b2cdffbbf858bf5f08baccc7a88c4f9efe6f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In several instances where cfg80211_get_radio_idx_by_chan() is called,
redundant checks are performed across function — such as verifying if
wiphy->n_radio < 2 or if the returned index is negative. These checks are
unnecessary, as the return value can be directly compared. Moreover, the
function can be safely called even when radio-level properties are not
explicitly advertised since in such case in each call it is going to get
same error value.
Therefore, simplify the usage of this function across all such cases by
removing redundant conditions and relying on the return value directly.
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250812-fix_scan_ap_flag_requirement_during_mlo-v4-2-383ffb6da213@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
At the end of reconfig we are activating all the links that were active
before the error.
During the activation, _ieee80211_link_use_channel will unassign and
re-assign the chanctx from/to the link.
But we only need to do the assign, as we are re-building the state as it
was before the reconfig.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.6245c3ae7031.Ia5f68992c7c112bea8a426c9339f50c88be3a9ca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
All the paths that could return an error are considered
misuses of the function and WARN already, and none of
the callers ever check the return value. Remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.5b436ee3c20c.Ieff61ec510939adb5fe6da4840557b649b3aa820@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, per-radio attributes are set on per-phy basis, i.e., all the
radios present in a wiphy will take attributes values sent from user. But
each radio in a wiphy can get different values from userspace based on
its requirement.
To extend support to set per-radio attributes, add support to get radio
index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX,
to get user specified radio index for which attributes should be changed.
Pass this to individual drivers, so that the drivers can use this radio
index to change per-radio attributes when necessary. Currently, per-radio
attributes identified are:
NL80211_ATTR_WIPHY_TX_POWER_LEVEL
NL80211_ATTR_WIPHY_ANTENNA_TX
NL80211_ATTR_WIPHY_ANTENNA_RX
NL80211_ATTR_WIPHY_RETRY_SHORT
NL80211_ATTR_WIPHY_RETRY_LONG
NL80211_ATTR_WIPHY_FRAG_THRESHOLD
NL80211_ATTR_WIPHY_RTS_THRESHOLD
NL80211_ATTR_WIPHY_COVERAGE_CLASS
NL80211_ATTR_TXQ_LIMIT
NL80211_ATTR_TXQ_MEMORY_LIMIT
NL80211_ATTR_TXQ_QUANTUM
By default, the radio index is set to -1. This means the attribute should
be treated as a global configuration. If the user has not specified any
index, then the radio index passed to individual drivers would be -1. This
would indicate that the attribute applies to all radios in that wiphy.
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Link: https://patch.msgid.link/20250615082312.619639-2-quic_rdevanat@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, when a non-DFS channel is brought up and the bandwidth is
expanded from 80 MHz to 160 MHz, where the primary 80 MHz is non-DFS
and the secondary 80 MHz consists of DFS channels, radar detection
fails if radar occurs in the secondary 80 MHz.
When the channel is switched from 80 MHz to 160 MHz, with the primary
80 MHz being non-DFS and the secondary 80 MHz consisting of DFS
channels, the radar required flag in the channel switch parameters
is set to true. However, when using a reserved channel context,
it is not updated in sdata, which disables radar detection in the
secondary 80 MHz DFS channels.
Update the radar required flag in sdata to fix this issue when using
a reserved channel context.
Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com>
Signed-off-by: Ramasamy Kaliappan <ramasamy.kaliappan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250608140324.1687117-1-ramasamy.kaliappan@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, in multi-radio wiphy cases, if one radio is operating on a DFS
channel, -EBUSY is returned even when a scan is requested on a different
radio. Because of this, an MLD AP with one radio (link) on a DFS channel
and Automatic Channel Selection (ACS) on another radio (link) cannot be
brought up.
In multi-radio wiphy cases, multiple radios are grouped under a single
wiphy. Hence, if a radio is operating on a DFS channel and a scan is
requested on a different radio of the same wiphy, the scan can be allowed
simultaneously without impacting the DFS operations.
Add logic to check the underlying radio used for the requested scan. If the
radio on which DFS is already running is not being used, allow the scan
operation; otherwise, return -EBUSY.
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250527-mlo-dfs-acs-v2-3-92c2f37c81d9@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, MLD links for an AP_VLAN interface type is not fully
supported.
Add allocation of separate links for each VLAN interface and copy
chanctx and chandef of AP bss to VLAN where necessary. Separate
links are created because for Dynamic VLAN each link will have its own
default_multicast_key.
Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com>
Link: https://patch.msgid.link/20250325213125.1509362-3-muna.sinada@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to save power, it can be desirable to change the
RX operating mode using OMI to reduce the bandwidth. As the
handshake must be done in the HTC+ field, it cannot be done
by mac80211 directly, so expose functions to the driver to
request and finalize the necessary updates.
Note that RX OMI really only changes what the peer (AP) will
transmit to us, but in order to use it to actually save some
power (by reducing the listen bandwidth) we also update rate
scaling and then the channel context's mindef accordingly.
The updates are split into two in order to sequence them
correctly, when reducing bandwidth first reduce the rate
scaling and thus TX, then send OMI, then reduce the listen
bandwidth (chandef); when increasing bandwidth this is the
other way around. This also requires tracking in different
variables which part is applicable already.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250101070249.2c1a1934bd73.I4e90fd503504e37f9eac5bdae62e3f07e7071275@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is useful for multi-radio devices that are capable of monitoring on
multiple channels simultanenously. When this flag is set, each monitor
interface is passed to the driver individually and can have a configured
channel.
The vif mac address for non-active monitor interfaces is cleared, in order
to allow the driver to tell them apart from active ones.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/3c55505ee0cf0a5f141fbcb30d1e8be8d9f40373.1728462320.git-series.nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to deal with (temporary) bandwidth reductions to/from
the AP such as the upcoming RX OMI changes, modify the min_def
calculation to also not take the chanreq width into account in
client mode. This normally changes nothing as the AP bandwidth
will be the same as the channel request's width. In the RX OMI
changes, however, the code will reduce the bandwidth for only
the AP STA, since the OMI is only to that, and TDLS STAs are
unaffected. Using the min_def for this case simplifies RX OMI
a lot.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.95a39c4f6f45.I2e7517fb1a7221dc6f60b0c752e4882042b4265d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to update the right link information, call the update
rate_control_rate_update() with the right link_sta, and then
pass that through to the driver's sta_rc_update() method. The
software rate control still doesn't support it, but that'll be
skipped by not having a rate control ref.
Since it now operates on a link sta, rename the driver method.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.5851b6b5fd41.Ibdf50d96afa4b761dd9b9dfd54a1147e77a75329@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently DFS works under assumption there could be only one channel
context in the hardware. Hence, drivers just calls the function
ieee80211_radar_detected() passing the hardware structure. However, with
MLO, this obviously will not work since number of channel contexts will be
more than one and hence drivers would need to pass the channel information
as well on which the radar is detected.
Also, when radar is detected in one of the links, other link's CAC should
not be cancelled.
Hence, in order to support DFS with MLO, do the following changes -
* Add channel context conf pointer as an argument to the function
ieee80211_radar_detected(). During MLO, drivers would have to pass on
which channel context conf radar is detected. Otherwise, drivers could
just pass NULL.
* ieee80211_radar_detected() will iterate over all channel contexts
present and
* if channel context conf is passed, only mark that as radar
detected
* if NULL is passed, then mark all channel contexts as radar
detected
* Then as usual, schedule the radar detected work.
* In the worker, go over all the contexts again and for all such context
which is marked with radar detected, cancel the ongoing CAC by calling
ieee80211_dfs_cac_cancel() and then notify cfg80211 via
cfg80211_radar_event().
* To cancel the CAC, pass the channel context as well where radar is
detected to ieee80211_dfs_cac_cancel(). This ensures that CAC is
canceled only on the links using the provided context, leaving other
links unaffected.
This would also help in scenarios where there is split phy 5 GHz radio,
which is capable of DFS channels in both lower and upper band. In this
case, simultaneous radars can be detected.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-9-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are a number of places where RCU list iteration is
used, but that aren't (always) called with RCU held. Use
just list_for_each_entry() in most, and annotate iface
iteration with the required locks.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240827094939.ed8ac0b2f897.I8443c9c3c0f8051841353491dae758021b53115e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When updating a channel context, the code can apply wider
bandwidth TDLS STA channel definitions to each and every
channel context used by the device, an approach that will
surely lead to problems if there is ever more than one.
Restrict the wider BW TDLS STA consideration to only TDLS
STAs that are actually related to links using the channel
context being updated.
Fixes: 0fabfaafec ("mac80211: upgrade BW of TDLS peers when possible")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240612143707.1ad989acecde.I5c75c94d95c3f4ea84f8ff4253189f4b13bad5c3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In channel switch without an additional channel context,
where the reassign logic kicks in, we also need to update
the station bandwidth and chandef minimum width correctly
to avoid having station rate control configured to wider
bandwidth than the channel context. Do that now.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240612143418.0bc3d28231b3.I51e76df86212057ca0469e235ba9bf4461cbee75@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Make ieee80211_chan_bw_change() able to use the reserved chanreq
(really the chandef part of it) for the calculations, so it can
be used _without_ applying the changes first. Remove the comment
that indicates this is required, since it no longer is. However,
this capability only gets used later.
Also, this is not ideal, we really should not different so much
between reserved and non-reserved usage, to simplify. That's a
further cleanup later though.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240612143418.1a08cf83b8cb.Ie567bb272eb25ce487651088f13ad041f549651c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Collect the CSA data in ieee80211_link_data_managed and
ieee80211_link_data into a csa sub-struct to clean up a
bit and make adding new things more obvious.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240506215543.29f954b1f576.I9a683a9647c33d4dd3011aade6677982428c1082@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the unlikely event that link_use_channel fails while activating a
link, mac80211 would go into a bad state. Unfortunately, we cannot
completely avoid failures from drivers in this case.
However, what we can do is to just continue internally anyway and assume
the driver is going to trigger a recovery flow from its side. Doing that
means that we at least have a consistent state in mac80211 allowing such
a recovery flow to succeed.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240418115219.1129e89f4b55.I6299678353e50e88b55c99b0bce15c64b52c2804@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's no need for a label/goto here, the only thing is
that drv_assign_vif_chanctx() must succeed to set 'conf'
and add the new context to the list, the remaining code
is (and must be) the same regardless.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240418115219.a94852030d33.I9d647178ab25636372ed79e5312c68a06e0bf60c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When searching for a chanctx for re-use, it's later adjusted and
assigned. It may also be that another one is already assigned to
the link in question, so unassign can also happen. In short, the
driver is called multiple times. During these callbacks, it may
thus change active links (on another interface), which then can
in turn cause the found chanctx (that's going to be reused) to
get removed and freed.
To avoid this, temporarily assign it to the reserved chanctx and
track the link that wants to use it in the reserved_links list.
This causes the ieee80211_chanctx_refcount() to be increased by
one during these operations, thus avoiding the free.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240418115219.94ea84c8ee1e.I0b247dbc0cd937ae6367bc0fc7e8d156b5d5f9b1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
