Caching saddr and daddr before pskb_pull() is problematic
since skb->head can change.
Remove these temporary variables:
- We only access &ipv6_hdr(skb)->saddr and &ipv6_hdr(skb)->daddr
when net_dbg_ratelimited() is called in the slow path.
- Avoid potential future misuse after pskb_pull() call.
Fixes: 4b3418fba0 ("ipv6: icmp: include addresses in debug messages")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260416103505.2380753-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As IPv6 is built-in only, there is no need to maintain the sender
registration infrastructure used to allow built-in subsystems to send
ICMPv6 messages when IPv6 was compiled as a module.
Drop the registration mechanism and the __icmpv6_send() sender
implementation. While icmpv6_send() users could be converted to
icmp6_send() that doesn't seems necessary as none of them are using the
force_saddr parameter.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Link: https://patch.msgid.link/20260325120928.15848-5-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko AI-review observed:
In ip6_err_gen_icmpv6_unreach(), the skb is an outer IPv4 ICMP error packet
where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2
and passed to icmp6_send(), it uses IP6CB(skb2).
IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm. The cipso
offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm
at offset 18.
If an attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao
would be a non-zero offset. Inside icmp6_send(), mip6_addr_swap() is called
and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO).
This would scan the inner, attacker-controlled IPv6 packet starting at that
offset, potentially returning a fake TLV without checking if the remaining
packet length can hold the full 18-byte struct ipv6_destopt_hao.
Could mip6_addr_swap() then perform a 16-byte swap that extends past the end
of the packet data into skb_shared_info?
Should the cb array also be cleared in ip6_err_gen_icmpv6_unreach() and
ip6ip6_err() to prevent this?
This patch implements the first suggestion.
I am not sure if ip6ip6_err() needs to be changed.
A separate patch would be better anyway.
Fixes: ca15a078bd ("sit: generate icmpv6 error when receiving icmpv4 error")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Closes: https://sashiko.dev/#/patchset/20260326155138.2429480-1-edumazet%40google.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Oskar Kjos <oskar.kjos@hotmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260326202608.2976021-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If net.ipv6.icmp.ratelimit is zero we do not have to call
inet_getpeer_v6() and inet_peer_xrlim_allow().
Both can be very expensive under DDOS.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260216142832.3834174-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Following part was needed before the blamed commit, because
inet_getpeer_v6() second argument was the prefix.
/* Give more bandwidth to wider prefixes. */
if (rt->rt6i_dst.plen < 128)
tmo >>= ((128 - rt->rt6i_dst.plen)>>5);
Now inet_getpeer_v6() retrieves hosts, we need to remove
@tmo adjustement or wider prefixes likes /24 allow 8x
more ICMP to be sent for a given ratelimit.
As we had this issue for a while, this patch changes net.ipv6.icmp.ratelimit
default value from 1000ms to 100ms to avoid potential regressions.
Also add a READ_ONCE() when reading net->ipv6.sysctl.icmpv6_time.
Fixes: fd0273d793 ("ipv6: Remove external dependency on rt6i_dst and rt6i_src")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260216142832.3834174-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yizhou Zhao reported that simply having one RAW socket on protocol
IPPROTO_RAW (255) was dangerous.
socket(AF_INET, SOCK_RAW, 255);
A malicious incoming ICMP packet can set the protocol field to 255
and match this socket, leading to FNHE cache changes.
inner = IP(src="192.168.2.1", dst="8.8.8.8", proto=255)/Raw("TEST")
pkt = IP(src="192.168.1.1", dst="192.168.2.1")/ICMP(type=3, code=4, nexthopmtu=576)/inner
"man 7 raw" states:
A protocol of IPPROTO_RAW implies enabled IP_HDRINCL and is able
to send any IP protocol that is specified in the passed header.
Receiving of all IP protocols via IPPROTO_RAW is not possible
using raw sockets.
Make sure we drop these malicious packets.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Link: https://lore.kernel.org/netdev/20251109134600.292125-1-zhaoyz24@mails.tsinghua.edu.cn/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260203192509.682208-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When replying to a ICMPv6 echo request that comes from localhost address
the right output ifindex is 1 (lo) and not rt6i_idev dev index. Use the
skb device ifindex instead. This fixes pinging to a local address from
localhost source address.
$ ping6 -I ::1 2001:1:1::2 -c 3
PING 2001:1:1::2 (2001:1:1::2) from ::1 : 56 data bytes
64 bytes from 2001:1:1::2: icmp_seq=1 ttl=64 time=0.037 ms
64 bytes from 2001:1:1::2: icmp_seq=2 ttl=64 time=0.069 ms
64 bytes from 2001:1:1::2: icmp_seq=3 ttl=64 time=0.122 ms
2001:1:1::2 ping statistics
3 packets transmitted, 3 received, 0% packet loss, time 2032ms
rtt min/avg/max/mdev = 0.037/0.076/0.122/0.035 ms
Fixes: 1b70d792cf ("ipv6: Use rt6i_idev index for echo replies to a local address")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260121194409.6749-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add missing READ_ONCE() when reading ipv6.sysctl.flowlabel_reflect,
as its value can be changed under us.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260115094141.3124990-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the ability to append the incoming IP interface information to
ICMPv6 error messages in accordance with RFC 5837 and RFC 4884. This is
required for more meaningful traceroute results in unnumbered networks.
The feature is disabled by default and controlled via a new sysctl
("net.ipv6.icmp.errors_extension_mask") which accepts a bitmask of ICMP
extensions to append to ICMP error messages. Currently, only a single
value is supported, but the interface and the implementation should be
able to support more extensions, if needed.
Clone the skb and copy the relevant data portions before modifying the
skb as the caller of icmp6_send() still owns the skb after the function
returns. This should be fine since by default ICMP error messages are
rate limited to 1000 per second and no more than 1 per second per
specific host.
Trim or pad the packet to 128 bytes before appending the ICMP extension
structure in order to be compatible with legacy applications that assume
that the ICMP extension structure always starts at this offset (the
minimum length specified by RFC 4884).
Since commit 20e1954fe2 ("ipv6: RFC 4884 partial support for SIT/GRE
tunnels") it is possible for icmp6_send() to be called with an skb that
already contains ICMP extensions. This can happen when we receive an
ICMPv4 message with extensions from a tunnel and translate it to an
ICMPv6 message towards an IPv6 host in the overlay network. I could not
find an RFC that supports this behavior, but it makes sense to not
overwrite the original extensions that were appended to the packet.
Therefore, avoid appending extensions if the length field in the
provided ICMPv6 header is already filled.
Export netdev_copy_name() using EXPORT_IPV6_MOD_GPL() to make it
available to IPv6 when it is built as a module.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251027082232.232571-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Blamed commit added a critical false sharing on a single
atomic_long_t under DOS, like receiving UDP packets
to closed ports.
Per netns ICMP6_MIB_RATELIMITHOST tracking uses per-cpu
storage and is enough, we do not need per-device and slow tracking.
Fixes: d0941130c9 ("icmp: Add counters for rate limits")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Cc: Abhishek Rawal <rawal.abhishek92@gmail.com>
Link: https://patch.msgid.link/20250905165813.1470708-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor icmpv6_xrlim_allow() and ip6_dst_hoplimit()
so that we acquire rcu_read_lock() a bit longer
to be able to use dst_dev_rcu() instead of dst_dev().
__ip6_rt_update_pmtu() and rt6_do_redirect can directly
use dst_dev_rcu() in sections already holding rcu_read_lock().
Small changes to use dst_dev_net_rcu() in
ip6_default_advmss(), ipv6_sock_ac_join(),
ip6_mc_find_dev() and ndisc_send_skb().
Fixes: 4a6ce2b6f2 ("net: introduce a new function dst_dev_put()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250828195823.3958522-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new helper as a step to deal with potential dst->dev races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250630121934.3399505-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ping_rcv() callers currently call skb_free() or consume_skb(),
forcing ping_rcv() to clone the skb.
After this patch ping_rcv() is now 'consuming' the original skb,
either moving to a socket receive queue, or dropping it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250226183437.1457318-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
icmp6_send() must acquire rcu_read_lock() sooner to ensure
the dev_net() call done from a safe context.
Other ICMPv6 uses of dev_net() seem safe, change them to
dev_net_rcu() to get LOCKDEP support to catch bugs.
Fixes: 9a43b709a2 ("[NETNS][IPV6] icmp6 - make icmpv6_socket per namespace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250205155120.1676781-12-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All inet_getpeer() callers except ip4_frag_init() don't need
to acquire a permanent refcount on the inetpeer.
They can switch to full RCU protection.
Move the refcount_inc_not_zero() into ip4_frag_init(),
so that all the other callers no longer have to
perform a pair of expensive atomic operations on
a possibly contended cache line.
inet_putpeer() no longer needs to be exported.
After this patch, my DUT can receive 8,400,000 UDP packets
per second targeting closed ports, using 50% less cpu cycles
than before.
Also change two calls to l3mdev_master_ifindex() by
l3mdev_master_ifindex_rcu() (Ido ideas)
Fixes: 8c2bd38b95 ("icmp: change the order of rate limits")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Host wide ICMP ratelimiter should be per netns, to provide better isolation.
Following patch in this series makes the sysctl per netns.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240829144641.3880376-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ICMP messages are ratelimited :
After the blamed commits, the two rate limiters are applied in this order:
1) host wide ratelimit (icmp_global_allow())
2) Per destination ratelimit (inetpeer based)
In order to avoid side-channels attacks, we need to apply
the per destination check first.
This patch makes the following change :
1) icmp_global_allow() checks if the host wide limit is reached.
But credits are not yet consumed. This is deferred to 3)
2) The per destination limit is checked/updated.
This might add a new node in inetpeer tree.
3) icmp_global_consume() consumes tokens if prior operations succeeded.
This means that host wide ratelimit is still effective
in keeping inetpeer tree small even under DDOS.
As a bonus, I removed icmp_global.lock as the fast path
can use a lock-free operation.
Fixes: c0303efeab ("net: reduce cycles spend on ICMP replies that gets rate limited")
Fixes: 4cdf507d54 ("icmp: add a global rate limitation")
Reported-by: Keyu Man <keyu.man@email.ucr.edu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240829144641.3880376-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
* Remove sentinel element from ctl_table structs.
* Remove the zeroing out of an array element (to make it look like a
sentinel) in sysctl_route_net_init And ipv6_route_sysctl_init.
This is not longer needed and is safe after commit c899710fe7
("networking: Update to register_net_sysctl_sz") added the array size
to the ctl_table registration.
* Remove extra sentinel element in the declaration of devinet_vars.
* Removed the "-1" in __devinet_sysctl_register, sysctl_route_net_init,
ipv6_sysctl_net_init and ipv4_sysctl_init_net that adjusted for having
an extra empty element when looping over ctl_table arrays
* Replace the for loop stop condition in __addrconf_sysctl_register that
tests for procname == NULL with one that depends on array size
* Removing the unprivileged user check in ipv6_route_sysctl_init is
safe as it is replaced by calling ipv6_route_sysctl_table_size;
introduced in commit c899710fe7 ("networking: Update to
register_net_sysctl_sz")
* Use a table_size variable to keep the value of ARRAY_SIZE
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of (struct rt6_info *)dst casts, we can use :
#define dst_rt6_info(_ptr) \
container_of_const(_ptr, struct rt6_info, dst)
Some places needed missing const qualifiers :
ip6_confirm_neigh(), ipv6_anycast_destination(),
ipv6_unicast_destination(), has_gateway()
v2: added missing parts (David Ahern)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
np->ucast_oif is read locklessly in some contexts.
Make all accesses to this field lockless, adding appropriate
annotations.
This also makes setsockopt( IPV6_UNICAST_IF ) lockless.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
np->mcast_oif is read locklessly in some contexts.
Make all accesses to this field lockless, adding appropriate
annotations.
This also makes setsockopt( IPV6_MULTICAST_IF ) lockless.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Preparation patch, extra arg is not used.
No functional changes intended.
This is needed to replace the xfrm session decode functions with
the flow dissector.
skb_flow_dissect() cannot be used as-is, because it attempts to deduce the
'struct net' to use for bpf program fetch from skb->sk or skb->dev, but
xfrm code path can see skbs that have neither sk or dev filled in.
So either flow dissector needs to try harder, e.g. by also trying
skb->dst->dev, or we have to pass the struct net explicitly.
Passing the struct net doesn't look too bad to me, most places
already have it available or can derive it from the output device.
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/netdev/202309271628.27fd2187-oliver.sang@intel.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Move np->dontfrag flag to inet->inet_flags to fix data-races.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Long ago we set out to remove the kitchen sink on kernel/sysctl.c arrays and
placings sysctls to their own sybsystem or file to help avoid merge conflicts.
Matthew Wilcox pointed out though that if we're going to do that we might as
well also *save* space while at it and try to remove the extra last sysctl
entry added at the end of each array, a sentintel, instead of bloating the
kernel by adding a new sentinel with each array moved.
Doing that was not so trivial, and has required slowing down the moves of
kernel/sysctl.c arrays and measuring the impact on size by each new move.
The complex part of the effort to help reduce the size of each sysctl is being
done by the patient work of el señor Don Joel Granados. A lot of this is truly
painful code refactoring and testing and then trying to measure the savings of
each move and removing the sentinels. Although Joel already has code which does
most of this work, experience with sysctl moves in the past shows is we need to
be careful due to the slew of odd build failures that are possible due to the
amount of random Kconfig options sysctls use.
To that end Joel's work is split by first addressing the major housekeeping
needed to remove the sentinels, which is part of this merge request. The rest
of the work to actually remove the sentinels will be done later in future
kernel releases.
At first I was only going to send his first 7 patches of his patch series,
posted 1 month ago, but in retrospect due to the testing the changes have
received in linux-next and the minor changes they make this goes with the
entire set of patches Joel had planned: just sysctl house keeping. There are
networking changes but these are part of the house keeping too.
The preliminary math is showing this will all help reduce the overall build
time size of the kernel and run time memory consumed by the kernel by about
~64 bytes per array where we are able to remove each sentinel in the future.
That also means there is no more bloating the kernel with the extra ~64 bytes
per array moved as no new sentinels are created.
Most of this has been in linux-next for about a month, the last 7 patches took
a minor refresh 2 week ago based on feedback.
-----BEGIN PGP SIGNATURE-----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=sq2p
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"Long ago we set out to remove the kitchen sink on kernel/sysctl.c
arrays and placings sysctls to their own sybsystem or file to help
avoid merge conflicts. Matthew Wilcox pointed out though that if we're
going to do that we might as well also *save* space while at it and
try to remove the extra last sysctl entry added at the end of each
array, a sentintel, instead of bloating the kernel by adding a new
sentinel with each array moved.
Doing that was not so trivial, and has required slowing down the moves
of kernel/sysctl.c arrays and measuring the impact on size by each new
move.
The complex part of the effort to help reduce the size of each sysctl
is being done by the patient work of el señor Don Joel Granados. A lot
of this is truly painful code refactoring and testing and then trying
to measure the savings of each move and removing the sentinels.
Although Joel already has code which does most of this work,
experience with sysctl moves in the past shows is we need to be
careful due to the slew of odd build failures that are possible due to
the amount of random Kconfig options sysctls use.
To that end Joel's work is split by first addressing the major
housekeeping needed to remove the sentinels, which is part of this
merge request. The rest of the work to actually remove the sentinels
will be done later in future kernel releases.
The preliminary math is showing this will all help reduce the overall
build time size of the kernel and run time memory consumed by the
kernel by about ~64 bytes per array where we are able to remove each
sentinel in the future. That also means there is no more bloating the
kernel with the extra ~64 bytes per array moved as no new sentinels
are created"
* tag 'sysctl-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sysctl: Use ctl_table_size as stopping criteria for list macro
sysctl: SIZE_MAX->ARRAY_SIZE in register_net_sysctl
vrf: Update to register_net_sysctl_sz
networking: Update to register_net_sysctl_sz
netfilter: Update to register_net_sysctl_sz
ax.25: Update to register_net_sysctl_sz
sysctl: Add size to register_net_sysctl function
sysctl: Add size arg to __register_sysctl_init
sysctl: Add size to register_sysctl
sysctl: Add a size arg to __register_sysctl_table
sysctl: Add size argument to init_header
sysctl: Add ctl_table_size to ctl_table_header
sysctl: Use ctl_table_header in list_for_each_table_entry
sysctl: Prefer ctl_table_header in proc_sysctl
Move from register_net_sysctl to register_net_sysctl_sz for all the
networking related files. Do this while making sure to mirror the NULL
assignments with a table_size of zero for the unprivileged users.
We need to move to the new function in preparation for when we change
SIZE_MAX to ARRAY_SIZE() in the register_net_sysctl macro. Failing to do
so would erroneously allow ARRAY_SIZE() to be called on a pointer. We
hold off the SIZE_MAX to ARRAY_SIZE change until we have migrated all
the relevant net sysctl registering functions to register_net_sysctl_sz
in subsequent commits.
An additional size function was added to the following files in order to
calculate the size of an array that is defined in another file:
include/net/ipv6.h
net/ipv6/icmp.c
net/ipv6/route.c
net/ipv6/sysctl_net_ipv6.c
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
icmpv6_flow_init(), ip6_datagram_flow_key_init() and ip6_mc_hdr() don't
need to modify their sk argument. Make that explicit using const.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
ICMPv6 error packets are not sent to the anycast destinations and this
prevents things like traceroute from working. So create a setting similar
to ECHO when dealing with Anycast sources (icmpv6_echo_ignore_anycast).
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20230419013238.2691167-1-maheshb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change icmpv6_echo_reply() to return a drop reason.
For the moment, return NOT_SPECIFIED or SKB_CONSUMED.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Creates three new drop reasons:
SKB_DROP_REASON_IPV6_NDISC_FRAG: invalid frag (suppress_frag_ndisc).
SKB_DROP_REASON_IPV6_NDISC_HOP_LIMIT: invalid hop limit.
SKB_DROP_REASON_IPV6_NDISC_BAD_CODE: invalid NDISC icmp6 code.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Accurately reports what happened in icmpv6_notify() when handling
a packet.
This makes use of the new IPV6_BAD_EXTHDR drop reason.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Swap is a function interface that provides exchange function. To avoid
code duplication, we can use swap function.
./net/ipv6/icmp.c:344:25-26: WARNING opportunity for swap().
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3896
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230131063456.76302-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are multiple ICMP rate limiting mechanisms:
* Global limits: net.ipv4.icmp_msgs_burst/icmp_msgs_per_sec
* v4 per-host limits: net.ipv4.icmp_ratelimit/ratemask
* v6 per-host limits: net.ipv6.icmp_ratelimit/ratemask
However, when ICMP output is limited, there is no way to tell
which limit has been hit or even if the limits are responsible
for the lack of ICMP output.
Add counters for each of the cases above. As we are within
local_bh_disable(), use the __INC stats variant.
Example output:
# nstat -sz "*RateLimit*"
IcmpOutRateLimitGlobal 134 0.0
IcmpOutRateLimitHost 770 0.0
Icmp6OutRateLimitHost 84 0.0
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Suggested-by: Abhishek Rawal <rawal.abhishek92@gmail.com>
Link: https://lore.kernel.org/r/273b32241e6b7fdc5c609e6f5ebc68caf3994342.1674605770.git.jamie.bainbridge@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
While reading sysctl_icmp_echo_enable_probe, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its readers.
Fixes: d329ea5bd8 ("icmp: add response to RFC 8335 PROBE messages")
Fixes: 1fd07f33c3 ("ipv6: ICMPV6: add response to ICMPV6 RFC 8335 PROBE messages")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to add the skb drop reasons support to icmpv6_param_prob(),
introduce the function icmpv6_param_prob_reason() and make
icmpv6_param_prob() an inline call to it. This new function will be
used in the following patches.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() used in icmp_rcv() and icmpv6_rcv() with
kfree_skb_reason().
In order to get the reasons of the skb drops after icmp message handle,
we change the return type of 'handler()' in 'struct icmp_control' from
'bool' to 'enum skb_drop_reason'. This may change its original
intention, as 'false' means failure, but 'SKB_NOT_DROPPED_YET' means
success now. Therefore, all 'handler' and the call of them need to be
handled. Following 'handler' functions are involved:
icmp_unreach()
icmp_redirect()
icmp_echo()
icmp_timestamp()
icmp_discard()
And following new drop reasons are added:
SKB_DROP_REASON_ICMP_CSUM
SKB_DROP_REASON_INVALID_PROTO
The reason 'INVALID_PROTO' is introduced for the case that the packet
doesn't follow rfc 1122 and is dropped. This is not a common case, and
I believe we can locate the problem from the data in the packet. For now,
this 'INVALID_PROTO' is used for the icmp broadcasts with wrong types.
Maybe there should be a document file for these reasons. For example,
list all the case that causes the 'UNHANDLED_PROTO' and 'INVALID_PROTO'
drop reason. Therefore, users can locate their problems according to the
document.
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Back in linux-2.6.25 (commit 98c6d1b261 "[NETNS]: Make icmpv6_sk per namespace.",
we added private per-cpu/per-netns ipv6 icmp sockets.
This adds memory and cpu costs, which do not seem needed.
Now typical servers have 256 or more cores, this adds considerable
tax to netns users.
icmp sockets are used from BH context, are not receiving packets,
and do not store any persistent state but the 'struct net' pointer.
icmpv6_xmit_lock() already makes sure to lock the chosen per-cpu
socket.
This patch has a considerable impact on the number of netns
that the worker thread in cleanup_net() can dismantle per second,
because ip6mr_sk_done() is no longer called, meaning we no longer
acquire the rtnl mutex, competing with other threads adding new netns.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC8754 says:
ICMP error packets generated within the SR domain are sent to source
nodes within the SR domain. The invoking packet in the ICMP error
message may contain an SRH. Since the destination address of a packet
with an SRH changes as each segment is processed, it may not be the
destination used by the socket or application that generated the
invoking packet.
For the source of an invoking packet to process the ICMP error
message, the ultimate destination address of the IPv6 header may be
required. The following logic is used to determine the destination
address for use by protocol-error handlers.
* Walk all extension headers of the invoking IPv6 packet to the
routing extension header preceding the upper-layer header.
- If routing header is type 4 Segment Routing Header (SRH)
o The SID at Segment List[0] may be used as the destination
address of the invoking packet.
Mangle the skb so the network header points to the invoking packet
inside the ICMP packet. The seg6 helpers can then be used on the skb
to find any segment routing headers. If found, mark this fact in the
IPv6 control block of the skb, and store the offset into the packet of
the SRH. Then restore the skb back to its old state.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch builds off of commit 2b246b2569
and adds functionality to respond to ICMPV6 PROBE requests.
Add icmp_build_probe function to construct PROBE requests for both
ICMPV4 and ICMPV6.
Modify icmpv6_rcv to detect ICMPV6 PROBE messages and call the
icmpv6_echo_reply handler.
Modify icmpv6_echo_reply to build a PROBE response message based on the
queried interface.
This patch has been tested using a branch of the iputils git repo which can
be found here: https://github.com/Juniper-Clinic-2020/iputils/tree/probe-request
Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current icmp_rcv function drops all unknown ICMP types, including
ICMP_EXT_ECHOREPLY (type 43). In order to parse Extended Echo Reply messages, we have
to pass these packets to the ping_rcv function, which does not do any
other filtering and passes the packet to the designated socket.
Pass incoming RFC 8335 ICMP Extended Echo Reply packets to the ping_rcv
handler instead of discarding the packet.
Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When query/report packets are received, mld module processes them.
But they are processed under BH context so it couldn't use sleepable
functions. So, in order to switch context, the two workqueues are
added which processes query and report event.
In the struct inet6_dev, mc_{query | report}_queue are added so it
is per-interface queue.
And mc_{query | report}_work are workqueue structure.
When the query or report event is received, skb is queued to proper
queue and worker function is scheduled immediately.
Workqueues and queues are protected by spinlock, which is
mc_{query | report}_lock, and worker functions are protected by RTNL.
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The icmp{,v6}_send functions make all sorts of use of skb->cb, casting
it with IPCB or IP6CB, assuming the skb to have come directly from the
inet layer. But when the packet comes from the ndo layer, especially
when forwarded, there's no telling what might be in skb->cb at that
point. As a result, the icmp sending code risks reading bogus memory
contents, which can result in nasty stack overflows such as this one
reported by a user:
panic+0x108/0x2ea
__stack_chk_fail+0x14/0x20
__icmp_send+0x5bd/0x5c0
icmp_ndo_send+0x148/0x160
In icmp_send, skb->cb is cast with IPCB and an ip_options struct is read
from it. The optlen parameter there is of particular note, as it can
induce writes beyond bounds. There are quite a few ways that can happen
in __ip_options_echo. For example:
// sptr/skb are attacker-controlled skb bytes
sptr = skb_network_header(skb);
// dptr/dopt points to stack memory allocated by __icmp_send
dptr = dopt->__data;
// sopt is the corrupt skb->cb in question
if (sopt->rr) {
optlen = sptr[sopt->rr+1]; // corrupt skb->cb + skb->data
soffset = sptr[sopt->rr+2]; // corrupt skb->cb + skb->data
// this now writes potentially attacker-controlled data, over
// flowing the stack:
memcpy(dptr, sptr+sopt->rr, optlen);
}
In the icmpv6_send case, the story is similar, but not as dire, as only
IP6CB(skb)->iif and IP6CB(skb)->dsthao are used. The dsthao case is
worse than the iif case, but it is passed to ipv6_find_tlv, which does
a bit of bounds checking on the value.
This is easy to simulate by doing a `memset(skb->cb, 0x41,
sizeof(skb->cb));` before calling icmp{,v6}_ndo_send, and it's only by
good fortune and the rarity of icmp sending from that context that we've
avoided reports like this until now. For example, in KASAN:
BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xa0e/0x12b0
Write of size 38 at addr ffff888006f1f80e by task ping/89
CPU: 2 PID: 89 Comm: ping Not tainted 5.10.0-rc7-debug+ #5
Call Trace:
dump_stack+0x9a/0xcc
print_address_description.constprop.0+0x1a/0x160
__kasan_report.cold+0x20/0x38
kasan_report+0x32/0x40
check_memory_region+0x145/0x1a0
memcpy+0x39/0x60
__ip_options_echo+0xa0e/0x12b0
__icmp_send+0x744/0x1700
Actually, out of the 4 drivers that do this, only gtp zeroed the cb for
the v4 case, while the rest did not. So this commit actually removes the
gtp-specific zeroing, while putting the code where it belongs in the
shared infrastructure of icmp{,v6}_ndo_send.
This commit fixes the issue by passing an empty IPCB or IP6CB along to
the functions that actually do the work. For the icmp_send, this was
already trivial, thanks to __icmp_send providing the plumbing function.
For icmpv6_send, this required a tiny bit of refactoring to make it
behave like the v4 case, after which it was straight forward.
Fixes: a2b78e9b2c ("sunvnet: generate ICMP PTMUD messages for smaller port MTUs")
Reported-by: SinYu <liuxyon@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/netdev/CAF=yD-LOF116aHub6RMe8vB8ZpnrrnoTdqhobEx+bvoA8AsP0w@mail.gmail.com/T/
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20210223131858.72082-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=6Cqb
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"While we have a small number of SELinux patches for v5.11, there are a
few changes worth highlighting:
- Change the LSM network hooks to pass flowi_common structs instead
of the parent flowi struct as the LSMs do not currently need the
full flowi struct and they do not have enough information to use it
safely (missing information on the address family).
This patch was discussed both with Herbert Xu (representing team
netdev) and James Morris (representing team
LSMs-other-than-SELinux).
- Fix how we handle errors in inode_doinit_with_dentry() so that we
attempt to properly label the inode on following lookups instead of
continuing to treat it as unlabeled.
- Tweak the kernel logic around allowx, auditallowx, and dontauditx
SELinux policy statements such that the auditx/dontauditx are
effective even without the allowx statement.
Everything passes our test suite"
* tag 'selinux-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
lsm,selinux: pass flowi_common instead of flowi to the LSM hooks
selinux: Fix fall-through warnings for Clang
selinux: drop super_block backpointer from superblock_security_struct
selinux: fix inode_doinit_with_dentry() LABEL_INVALID error handling
selinux: allow dontauditx and auditallowx rules to take effect without allowx
selinux: fix error initialization in inode_doinit_with_dentry()
As pointed out by Herbert in a recent related patch, the LSM hooks do
not have the necessary address family information to use the flowi
struct safely. As none of the LSMs currently use any of the protocol
specific flowi information, replace the flowi pointers with pointers
to the address family independent flowi_common struct.
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Based on RFC 8200, Section 4.5 Fragment Header:
- If the first fragment does not include all headers through an
Upper-Layer header, then that fragment should be discarded and
an ICMP Parameter Problem, Code 3, message should be sent to
the source of the fragment, with the Pointer field set to zero.
Checking each packet header in IPv6 fast path will have performance impact,
so I put the checking in ipv6_frag_rcv().
As the packet may be any kind of L4 protocol, I only checked some common
protocols' header length and handle others by (offset + 1) > skb->len.
Also use !(frag_off & htons(IP6_OFFSET)) to catch atomic fragments
(fragmented packet with only one fragment).
When send ICMP error message, if the 1st truncated fragment is ICMP message,
icmp6_send() will break as is_ineligible() return true. So I added a check
in is_ineligible() to let fragment packet with nexthdr ICMP but no ICMP header
return false.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
