mirror of
https://github.com/torvalds/linux.git
synced 2026-07-27 17:47:41 +02:00
master
560 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Oliver Hartkopp
|
cf070fe33b |
can: isotp: serialize TX state transitions under so->rx_lock
The TX state machine (so->tx.state) is driven from three contexts:
sendmsg() claiming and progressing a transfer, the RX path consuming
Flow Control/echo frames, and two hrtimers timing out a stalled
transfer. Mixing a lock-free cmpxchg() claim in sendmsg() with
hrtimer_cancel() calls made under so->rx_lock elsewhere left windows
where a frame or timer callback could act on a state that had already
moved on, corrupting an unrelated transfer.
so->rx_lock now covers the full lifecycle of a TX claim: sendmsg()
takes it to check so->tx.state is ISOTP_IDLE, switch it to
ISOTP_SENDING, bump so->tx_gen and drain the previous transfer's
timers - all as one critical section. isotp_rcv_fc()/isotp_rcv_cf()
already run under this lock via isotp_rcv(), and isotp_rcv_echo() now
takes it itself, so none of them can ever observe a transfer mid-claim.
This also means a transfer can no longer be handed to sendmsg()'s
cleanup paths (signal or send error) while another thread is
concurrently claiming or finishing it, so those paths can cancel
timers and reset the state unconditionally.
isotp_release() claims the socket the same way, so a racing sendmsg()
sees a consistent ISOTP_SHUTDOWN and skips arming its timer or sending.
Only the hrtimer callbacks stay outside so->rx_lock, since they run
under so->rx_lock's cancellation elsewhere and taking it themselves
would deadlock. so->tx_gen lets them recognize whether the transfer
they timed out is still the one currently active, so they don't
report an error against a transfer that has since completed or been
superseded.
Fixes:
|
||
|
Oliver Hartkopp
|
20bab8b88b |
can: isotp: fix use-after-free race with concurrent NETDEV_UNREGISTER
isotp_release() looked up the bound network device via dev_get_by_index()
using the stored ifindex. During device unregistration the device is
unlisted from the ifindex hash before the NETDEV_UNREGISTER notifier
chain runs, so a concurrent isotp_release() could find no device, skip
can_rx_unregister() entirely, and still proceed to free the socket.
Since isotp_release() had already removed itself from the isotp
notifier list at that point, isotp_notify() would never get a chance to
clean up either, leaving a stale CAN filter that keeps pointing at the
freed socket.
Fix this the same way raw.c already does: hold a tracked reference to
the bound net_device in the socket (so->dev/so->dev_tracker) from
bind() onward instead of re-resolving it from the ifindex, and
serialize bind()/release() with rtnl_lock() so that so->dev is always
consistent with what the NETDEV_UNREGISTER notifier sees. so->dev
stays valid regardless of ifindex-hash unlisting, and is only ever
cleared by whichever of isotp_release()/isotp_notify() gets there
first, so the filter is always removed exactly once.
isotp_bind() now rejects a (re)bind with -EAGAIN while so->[tx|rx].state
isn't ISOTP_IDLE yet, so a timer left running by a prior
NETDEV_UNREGISTER can't act on a newly bound so->ifindex. Both checks
share the same lock_sock() section, so there is no window in which a
concurrent isotp_notify() clearing so->bound could be missed.
Fixes:
|
||
|
Oliver Hartkopp
|
9b1a02e0d9 |
can: isotp: use unconditional synchronize_rcu() in isotp_release()
isotp_notify() unregisters the (RCU) CAN filters via can_rx_unregister()
and clears so->bound without waiting for a grace period. isotp_release()
uses so->bound to decide whether it needs to call synchronize_rcu()
before cancelling so->rxtimer, so when NETDEV_UNREGISTER runs first it
skips that synchronize_rcu() and can cancel the timer while an
in-flight isotp_rcv() is still executing and about to re-arm it via
isotp_send_fc(), leading to a use-after-free timer callback on the
freed socket.
sakisho-bot remarked a problem with rtnl_lock held in isotp_notify(),
therefore make isotp_release() always call synchronize_rcu() before
cancelling the timers, regardless of so->bound. This still closes the
original race (isotp_notify() clearing so->bound without waiting for
in-flight isotp_rcv() callers before isotp_release() cancels the RX
timer) without adding any RCU wait to the netdevice notifier path.
Fixes:
|
||
|
Oliver Hartkopp
|
2f5976f54a |
can: bcm: track a single source interface for ANYDEV timeout/throttle ops
An ANYDEV rx op (ifindex == 0) with an active RX timeout and/or
throttle timer has no defined semantics when matching frames arrive
from several interfaces: bcm_rx_handler() can run concurrently for
the same op on different CPUs, racing hrtimer_cancel()/
bcm_rx_starttimer() against bcm_rx_timeout_handler() and causing
spurious RX_TIMEOUT notifications and last_frames corruption. The
same concurrency lets throttled multiplex frames from different
interfaces clobber the single rx_ifindex/rx_stamp fields shared by
the op.
Add op->if_detected to track the first interface that delivers a
matching frame while a timeout/throttle timer is configured, and
reject frames from any other interface for that op. The claim is
decided in bcm_rx_handler() before hrtimer_cancel() touches
op->timer, so a rejected frame can never disturb the claimed
interface's watchdog. RTR-mode ops are excluded via RX_RTR_FRAME,
independent of kt_ival1/kt_ival2, since those may briefly hold a
stale value from an earlier non-RTR configuration.
The claim is released in bcm_notify() on NETDEV_UNREGISTER and in
bcm_rx_setup() when SETTIMER reconfigures the timer values.
A (re-)claim is only possible on CAN devices in NETREG_REGISTERED
dev->reg_state to cover the release in bcm_notify() where reg_state
becomes NETREG_UNREGISTERING until synchronize_net().
Fixes:
|
||
|
Oliver Hartkopp
|
58fd6cbc85 |
can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler()
For an rx op subscribed on all interfaces (ifindex == 0), the same op
is registered once in the shared per-netns wildcard filter list, so
bcm_rx_handler() can run concurrently on different CPUs for frames
arriving on different net devices.
op->rx_stamp and op->rx_ifindex were written before bcm_rx_update_lock was
taken, allowing concurrent writers to race each other - including a torn
store of the 64-bit rx_stamp on 32-bit platforms.
Beyond a torn store bcm_send_to_user() must report the timestamp/ifindex
of the very same frame whose content it is delivering. So the assignment
is placed in the same unbroken bcm_rx_update_lock section as the content
comparison.
As a side effect, the RTR-request frame feature (which never reach
bcm_send_to_user()) no longer updates rx_stamp/rx_ifindex, since only
the notification path needs them.
Fixes:
|
||
|
Oliver Hartkopp
|
3b762c0d95 |
can: bcm: fix stale rx/tx ops after device removal
RX: an RX_SETUP update(!) for an existing op skipped can_rx_register()
unconditionally, even when a concurrent NETDEV_UNREGISTER had already
torn down its registration (op->rx_reg_dev == NULL). This silently
did not re-enable frame delivery for that updated filter. bcm_rx_setup()
now re-registers in that case, while leaving rx_ops with ifindex = 0
(all CAN devices) which never carry a tracked rx_reg_dev registered as-is.
TX: bcm_notify() only handled bo->rx_ops on NETDEV_UNREGISTER, leaving
tx_ops with an active cyclic transmission re-arming its hrtimer
indefinitely to execute bcm_tx_timeout_handler(). Cancelling the hrtimer
prevents the runaway timer and any injection into a later reused ifindex,
since nothing else calls bcm_can_tx() for the op until an explicit
TX_SETUP update re-arms it.
Unlike bcm_rx_unreg(), which clears the tracked rx_reg_dev for rx_ops,
the ifindex is intentionally left unchanged for tx_ops. bcm_tx_setup()
always rejects ifindex 0, so clearing it would strand the op: neither a
later TX_SETUP (bcm_find_op()) nor TX_DELETE (bcm_delete_tx_op()) could
ever find it again, since both require an exact ifindex match.
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/linux-can/20260708094536.DDF821F00A3A@smtp.kernel.org/
Closes: https://lore.kernel.org/linux-can/20260708154039.347ED1F000E9@smtp.kernel.org/
Fixes:
|
||
|
Oliver Hartkopp
|
d59948293e |
can: bcm: add missing device refcount for CAN filter removal
sashiko-bot remarked a problem with a concurrent device unregistration in isotp.c which also is present in the bcm.c code. A former fix for raw.c commit |
||
|
Oliver Hartkopp
|
62ec41f364 |
can: bcm: validate frame length in bcm_rx_setup() for RTR replies
bcm_tx_setup() validates cf->len against the CAN/CAN FD DLC limits
before installing frames for TX_SETUP, but bcm_rx_setup() never did
the same for the RTR-reply frame configured via RX_SETUP with
RX_RTR_FRAME.
Fixes:
|
||
|
Oliver Hartkopp
|
12ce799f7a |
can: bcm: extend bcm_tx_lock usage for data and timer updates
Stage new CAN frame content for an existing tx op into a kmalloc()'d
buffer and validate it there, mirroring the approach already used in
bcm_rx_setup(). Only copy the validated data into op->frames while
holding op->bcm_tx_lock, so bcm_can_tx() and bcm_tx_timeout_handler()
can no longer observe a partially updated or unvalidated frame.
Add a missing error path for memcpy_from_msg() when copying CAN frame
data from userspace.
Also move the kt_ival1/kt_ival2/ival1/ival2 updates in bcm_tx_setup()
under op->bcm_tx_lock, and read kt_ival1/kt_ival2/count under the same
lock in bcm_tx_set_expiry() and bcm_tx_timeout_handler(), closing the
torn 64-bit ktime_t read on 32-bit platforms.
Fixes:
|
||
|
Oliver Hartkopp
|
7b2c3eabc4 |
can: bcm: add missing rcu list annotations and operations
sashiko-bot remarked the missing use of list_add_rcu() in
bcm_[rx|tx]_setup() to have a proper initialized bcm_op structure
when bcm_proc_show() traverses the bcm_op's under rcu_read_lock().
To cover all initial settings of the bcm_op's the list_add_rcu() calls
are moved to the end of the setup code.
While at it, also fix the mirroring removal side: bcm_release() called
bcm_remove_op() - which frees the op via call_rcu() - on ops that were
still linked in bo->tx_ops/bo->rx_ops, without list_del_rcu() first.
Unlink each op with list_del_rcu() before handing it to bcm_remove_op(),
matching the existing pattern in bcm_delete_tx_op()/bcm_delete_rx_op().
Reported-by: sashiko-reviews@lists.linux.dev
Closes: https://lore.kernel.org/linux-can/20260610094654.A1FFE1F00893@smtp.kernel.org/
Fixes:
|
||
|
Oliver Hartkopp
|
e6c24ba95f |
can: bcm: fix CAN frame rx/tx statistics
KCSAN detected a data race within the bcm_rx_handler() when two CAN frames
have been simultaneously received and processed in a single rx op by two
different CPUs.
Use atomic operations with (signed) long data types to access the
statistics in the hot path to fix the KCSAN complaint.
Additionally simplify the update and check of statistics overflow by
using the atomic operations in separate bcm_update_[rx|tx]_stats()
functions. The rx variant runs under bcm_rx_update_lock to prevent
races when resetting the two rx counters; the tx variant runs under
bcm_tx_lock and only needs to guard its own counter's overflow.
As the rx path resets its values already at LONG_MAX / 100, there is
no conflict between the two locking domains (bcm_rx_update_lock vs.
bcm_tx_lock) even for ops that use both paths.
The rx statistics update and the frames_filtered update in
bcm_rx_changed() were previously performed in two separate
bcm_rx_update_lock sections. For an rx op subscribed on all interfaces
(ifindex == 0), bcm_rx_handler() can run concurrently on different
CPUs, so a counter reset by one CPU between these two sections could
leave frames_filtered larger than frames_abs on another CPU, producing
a bogus (even negative) reduction percentage in procfs. Update the
statistics in the same critical section as bcm_rx_changed() to close
this gap, which also removes the now unneeded extra lock/unlock pair
around the traffic_flags calculation.
Fixes:
|
||
|
Oliver Hartkopp
|
749179c2e2 |
can: bcm: add locking when updating filter and timer values
KCSAN detected a simultaneous access to timer values that can be
overwritten in bcm_rx_setup() when updating timer and filter content
while bcm_rx_handler(), bcm_rx_timeout_handler() or bcm_rx_thr_handler()
run concurrently on incoming CAN traffic.
Protect the timer (ival1/ival2/kt_ival1/kt_ival2/kt_lastmsg) and filter
(nframes/flags/frames/last_frames) updates in bcm_rx_setup() with a new
per-op bcm_rx_update_lock, taken with the matching scope in the RX
handlers. memcpy_from_msg() is staged into a temporary buffer before the
lock is taken, since it can sleep and must not run under a spinlock.
hrtimer_cancel() is always called without bcm_rx_update_lock held, since
bcm_rx_timeout_handler()/bcm_rx_thr_handler() take the same lock and a
running callback would otherwise deadlock against the canceller.
Also close a related race: bcm_rx_setup() cleared the RTR flag in the
stored reply frame's can_id as a separate, unprotected step after the
frame content was already installed, so a concurrent bcm_rx_handler()
could transmit a stale reply with CAN_RTR_FLAG still set. Fold that
normalization into the initial frame preparation instead (on the staged
buffer for updates, directly on op->frames pre-registration for new
ops), so the installed frame is always atomically self-consistent.
bcm_rx_handler()'s RX_RTR_FRAME check now takes a lock-protected
snapshot of op->flags before deciding whether to call bcm_can_tx(),
but does not hold the lock across that call.
Also take a lock-protected snapshot of the currframe in bcm_can_tx()
to avoid partly overwrites by content updates in bcm_tx_setup().
Finally check if a TX_RESET_MULTI_IDX/SETTIMER might have reset
op->currframe between the two locked sections in bcm_can_tx().
Omit calling hrtimer_forward() with zero interval in bcm_rx_thr_handler().
kt_ival2 may have been concurrently cleared by bcm_rx_setup() before it
cancels this timer, so check kt_ival2 inside the bcm_rx_update_lock.
Fixes:
|
||
|
Oliver Hartkopp
|
d9b091d9d2 |
can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure
bcm_sendmsg() reads bo->ifindex and checks bo->bound before taking
lock_sock(), while bcm_notify(), bcm_connect() and bcm_release() all
mutate both fields under that same lock. Because the lockless reads
and the locked writes are unordered with respect to each other, a
racing bcm_notify() (device unregister) or bcm_connect() (concurrent
bind on another thread sharing the socket) can make bcm_sendmsg()
observe an inconsistent combination, e.g. a stale bound=1 together
with the now-cleared ifindex=0, silently turning a socket bound to a
specific CAN interface into one that also matches "any" interface.
Keep the lockless bo->bound check purely as a fast-path reject, and
move the ifindex read (and a bo->bound re-check) into the locked
section, where every writer already serializes. This removes the
possibility of observing the two fields torn against each other,
rather than trying to fix it with more READ_ONCE()/WRITE_ONCE() pairs
on two independently updated fields. Annotate the now-purely-lockless
bo->bound accesses consistently across all its write sites.
Also fix bcm_rx_setup() silently returning success when the target
device disappears concurrently instead of reporting -ENODEV, so a
broken RX op is no longer left registered as if it had succeeded.
Fixes:
|
||
|
Lee Jones
|
68973f9db7 |
can: bcm: defer rx_op deallocation to workqueue to fix thrtimer UAF
Commit |
||
|
Shuhao Fu
|
e4e8af62ad |
can: j1939: fix lockless local-destination check
j1939_priv.ents[].nusers is documented as protected by priv->lock, and
its updates already happen under that lock. j1939_can_recv() also reads
it under read_lock_bh(). However, j1939_session_skb_queue() and
j1939_tp_send() still read priv->ents[da].nusers without taking the
lock.
Those transport-side checks decide whether to set J1939_ECU_LOCAL_DST, so
they can race with j1939_local_ecu_get() and j1939_local_ecu_put() while
userspace is binding or releasing sockets concurrently with TP traffic.
This can misclassify TP/ETP sessions as local or remote and take the wrong
transport path.
Fix both transport paths by routing the destination-locality check through
a helper that reads ents[].nusers under read_lock_bh(&priv->lock).
Fixes:
|
||
|
Oliver Hartkopp
|
1e5185c090 |
can: raw: add locking for raw flags bitfield
With commit |
||
|
Linus Torvalds
|
91a4855d6c |
Networking changes for 7.1.
Core & protocols
----------------
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP.
- Number of code moves to help the compiler with inlining.
Avoid output arguments for returning drop reason where possible.
- Rework drop handling within qdiscs to include more metadata
about the reason and dropping qdisc in the tracepoints.
- Remove the rtnl_lock use from IP Multicast Routing.
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two.
- Report TCP delayed ack timer information via socket diag.
- Add ip_local_port_step_width sysctl to allow distributing the randomly
selected ports more evenly throughout the allowed space.
- Add support for per-route tunsrc in IPv6 segment routing.
- Start work of switching sockopt handling to iov_iter.
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up.
- Support MSG_EOR in MPTCP.
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage.
- Remove UDP-Lite support (as announced in 2023).
- Remove support for building IPv6 as a module.
Remove the now unnecessary function calling indirection.
Cross-tree stuff
----------------
- Move Michael MIC code from generic crypto into wireless,
it's considered insecure but some WiFi networks still need it.
Netfilter
---------
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate.
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex.
- Add more opinionated input validation to lower security exposure.
- Make IPVS hash tables to be per-netns and resizable.
Wireless
--------
- Finished assoc frame encryption/EPPKE/802.1X-over-auth.
- Radar detection improvements.
- Add 6 GHz incumbent signal detection APIs.
- Multi-link support for FILS, probe response templates and
client probing.
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware.
Driver API
----------
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs.
- Add standard counters for reporting pause storm events
(implement in mlx5 and fbnic).
- Add configuration API for completion writeback buffering
(implement in mana).
- Support driver-initiated change of RSS context sizes.
- Support DPLL monitoring input frequency (implement in zl3073x).
- Support per-port resources in devlink (implement in mlx5).
Misc
----
- Expand the YAML spec for Netfilter.
Drivers
-------
- Software:
- macvlan: support multicast rx for bridge ports with shared source
MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EhQZ
-----END PGP SIGNATURE-----
Merge tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
Wireless:
- Finished assoc frame encryption/EPPKE/802.1X-over-auth
- Radar detection improvements
- Add 6 GHz incumbent signal detection APIs
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
|
||
|
Jakub Kicinski
|
35c2c39832 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Merge in late fixes in preparation for the net-next PR. Conflicts: include/net/sch_generic.h |
||
|
Breno Leitao
|
5b75e7d676 |
can: raw: convert to getsockopt_iter
Convert CAN raw socket's getsockopt implementation to use the new getsockopt_iter callback with sockopt_t. Key changes: - Replace (char __user *optval, int __user *optlen) with sockopt_t *opt - Use opt->optlen for buffer length (input) and returned size (output) - Use copy_to_iter() instead of copy_to_user() - For CAN_RAW_FILTER and CAN_RAW_XL_VCID_OPTS: on -ERANGE, set opt->optlen to the required buffer size. The wrapper writes this back to userspace even on error, preserving the existing API that lets userspace discover the needed allocation size. Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20260408-getsockopt-v3-4-061bb9cb355d@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
b7d74ea0fd |
vfs-7.1-rc1.kino
Please consider pulling these changes from the signed vfs-7.1-rc1.kino tag. Thanks! Christian -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCadjZCgAKCRCRxhvAZXjc otmnAP4sbsxZQdz2TG2hJuOwnEZOkkxZQOUMc3ERVyZaWXIeTAEA7e5M+8FpoG9n 8ipO76UoaXdGLESrqVdp9EOhLqOW7QY= =uMeJ -----END PGP SIGNATURE----- Merge tag 'vfs-7.1-rc1.kino' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs i_ino updates from Christian Brauner: "For historical reasons, the inode->i_ino field is an unsigned long, which means that it's 32 bits on 32 bit architectures. This has caused a number of filesystems to implement hacks to hash a 64-bit identifier into a 32-bit field, and deprives us of a universal identifier field for an inode. This changes the inode->i_ino field from an unsigned long to a u64. This shouldn't make any material difference on 64-bit hosts, but 32-bit hosts will see struct inode grow by at least 4 bytes. This could have effects on slabcache sizes and field alignment. The bulk of the changes are to format strings and tracepoints, since the kernel itself doesn't care that much about the i_ino field. The first patch changes some vfs function arguments, so check that one out carefully. With this change, we may be able to shrink some inode structures. For instance, struct nfs_inode has a fileid field that holds the 64-bit inode number. With this set of changes, that field could be eliminated. I'd rather leave that sort of cleanups for later just to keep this simple" * tag 'vfs-7.1-rc1.kino' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: nilfs2: fix 64-bit division operations in nilfs_bmap_find_target_in_group() EVM: add comment describing why ino field is still unsigned long vfs: remove externs from fs.h on functions modified by i_ino widening treewide: fix missed i_ino format specifier conversions ext4: fix signed format specifier in ext4_load_inode trace event treewide: change inode->i_ino from unsigned long to u64 nilfs2: widen trace event i_ino fields to u64 f2fs: widen trace event i_ino fields to u64 ext4: widen trace event i_ino fields to u64 zonefs: widen trace event i_ino fields to u64 hugetlbfs: widen trace event i_ino fields to u64 ext2: widen trace event i_ino fields to u64 cachefiles: widen trace event i_ino fields to u64 vfs: widen trace event i_ino fields to u64 net: change sock.sk_ino and sock_i_ino() to u64 audit: widen ino fields to u64 vfs: widen inode hash/lookup functions to u64 |
||
|
Eric Dumazet
|
900f27fb79 |
net: change sock_queue_rcv_skb_reason() to return a drop_reason
Change sock_queue_rcv_skb_reason() to return the drop_reason directly instead of using a reference. This is part of an effort to remove stack canaries and reduce bloat. $ scripts/bloat-o-meter -t vmlinux.old vmlinux.new add/remove: 0/0 grow/shrink: 3/7 up/down: 79/-301 (-222) Function old new delta vsock_queue_rcv_skb 50 79 +29 ipmr_cache_report 1290 1315 +25 ip6mr_cache_report 1322 1347 +25 packet_rcv_spkt 329 327 -2 sock_queue_rcv_skb_reason 166 128 -38 raw_rcv_skb 122 80 -42 ping_queue_rcv_skb 109 61 -48 ping_rcv 215 162 -53 rawv6_rcv_skb 278 224 -54 raw_rcv 591 527 -64 Total: Before=29722890, After=29722668, chg -0.00% Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20260409145625.2306224-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Samuel Page
|
a535a9217c |
can: raw: fix ro->uniq use-after-free in raw_rcv()
raw_release() unregisters raw CAN receive filters via can_rx_unregister(),
but receiver deletion is deferred with call_rcu(). This leaves a window
where raw_rcv() may still be running in an RCU read-side critical section
after raw_release() frees ro->uniq, leading to a use-after-free of the
percpu uniq storage.
Move free_percpu(ro->uniq) out of raw_release() and into a raw-specific
socket destructor. can_rx_unregister() takes an extra reference to the
socket and only drops it from the RCU callback, so freeing uniq from
sk_destruct ensures the percpu area is not released until the relevant
callbacks have drained.
Fixes:
|
||
|
Oliver Hartkopp
|
424e95d621 |
can: isotp: fix tx.buf use-after-free in isotp_sendmsg()
isotp_sendmsg() uses only cmpxchg() on so->tx.state to serialize access
to so->tx.buf. isotp_release() waits for ISOTP_IDLE via
wait_event_interruptible() and then calls kfree(so->tx.buf).
If a signal interrupts the wait_event_interruptible() inside close()
while tx.state is ISOTP_SENDING, the loop exits early and release
proceeds to force ISOTP_SHUTDOWN and continues to kfree(so->tx.buf)
while sendmsg may still be reading so->tx.buf for the final CAN frame
in isotp_fill_dataframe().
The so->tx.buf can be allocated once when the standard tx.buf length needs
to be extended. Move the kfree() of this potentially extended tx.buf to
sk_destruct time when either isotp_sendmsg() and isotp_release() are done.
Fixes:
|
||
|
Ali Norouzi
|
b9c310d727 |
can: gw: fix OOB heap access in cgw_csum_crc8_rel()
cgw_csum_crc8_rel() correctly computes bounds-safe indices via calc_idx():
int from = calc_idx(crc8->from_idx, cf->len);
int to = calc_idx(crc8->to_idx, cf->len);
int res = calc_idx(crc8->result_idx, cf->len);
if (from < 0 || to < 0 || res < 0)
return;
However, the loop and the result write then use the raw s8 fields directly
instead of the computed variables:
for (i = crc8->from_idx; ...) /* BUG: raw negative index */
cf->data[crc8->result_idx] = ...; /* BUG: raw negative index */
With from_idx = to_idx = result_idx = -64 on a 64-byte CAN FD frame,
calc_idx(-64, 64) = 0 so the guard passes, but the loop iterates with
i = -64, reading cf->data[-64], and the write goes to cf->data[-64].
This write might end up to 56 (7.0-rc) or 40 (<= 6.19) bytes before the
start of the canfd_frame on the heap.
The companion function cgw_csum_xor_rel() uses `from`/`to`/`res`
correctly throughout; fix cgw_csum_crc8_rel() to match.
Confirmed with KASAN on linux-7.0-rc2:
BUG: KASAN: slab-out-of-bounds in cgw_csum_crc8_rel+0x515/0x5b0
Read of size 1 at addr ffff8880076619c8 by task poc_cgw_oob/62
To configure the can-gw crc8 checksums CAP_NET_ADMIN is needed.
Fixes:
|
||
|
Oliver Hartkopp
|
46eee1661a |
can: statistics: add missing atomic access in hot path
Commit |
||
|
Jeff Layton
|
0fe27e5985
|
net: change sock.sk_ino and sock_i_ino() to u64
inode->i_ino is being converted to a u64. sock.sk_ino (which caches the inode number) must also be widened to avoid truncation on 32-bit architectures where unsigned long is only 32 bits. Change sk_ino from unsigned long to u64, and update the return type of sock_i_ino() to match. Fix all format strings that print the result of sock_i_ino() (%lu -> %llu), and widen the intermediate variables and function parameters in the diag modules that were using int to hold the inode number. Note that the UAPI socket diag structures (inet_diag_msg.idiag_inode, unix_diag_msg.udiag_ino, etc.) are all __u32 and cannot be changed without breaking the ABI. The assignments to those fields will silently truncate, which is the existing behavior. Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for net/can Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://patch.msgid.link/20260304-iino-u64-v3-3-2257ad83d372@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Oliver Hartkopp
|
c35636e91e |
can: bcm: fix locking for bcm_op runtime updates
Commit |
||
|
Linus Torvalds
|
32a92f8c89 |
Convert more 'alloc_obj' cases to default GFP_KERNEL arguments
This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
bf4afc53b7 |
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Kees Cook
|
69050f8d6d |
treewide: Replace kmalloc with kmalloc_obj for non-scalar types
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
Oliver Hartkopp
|
3ffecc14ec |
can: gw: use can_gw_hops instead of sk_buff::csum_start
As CAN skbs don't use IP checksums the skb->csum_start variable was used to store the can-gw CAN frame time-to-live counter together with skb->ip_summed set to CHECKSUM_UNNECESSARY. Remove the 'hack' using the skb->csum_start variable and move the content to can_skb_ext::can_gw_hops of the CAN skb extensions. The module parameter 'max_hops' has been reduced to a single byte to fit can_skb_ext::can_gw_hops as the maximum value to be stored is 6. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://patch.msgid.link/20260201-can_skb_ext-v8-6-3635d790fe8b@hartkopp.net Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Oliver Hartkopp
|
9f10374bb0 |
can: remove private CAN skb headroom infrastructure
This patch removes struct can_skb_priv which was stored at skb->head and the can_skb_reserve() helper which was used to shift skb->head. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://patch.msgid.link/20260201-can_skb_ext-v8-5-3635d790fe8b@hartkopp.net Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Oliver Hartkopp
|
5a9229dbb4 |
can: move ifindex to CAN skb extensions
When routing CAN frames over different CAN interfaces the interface index skb->iif is overwritten with every single hop. To prevent sending a CAN frame back to its originating (first) incoming CAN interface another ifindex variable is needed, which was stored in can_skb_priv::ifindex. Move the can_skb_priv::ifindex content to can_skb_ext::can_iif. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://patch.msgid.link/20260201-can_skb_ext-v8-3-3635d790fe8b@hartkopp.net Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Oliver Hartkopp
|
96ea3a1e2d |
can: add CAN skb extension infrastructure
To remove the private CAN bus skb headroom infrastructure 8 bytes need to be stored in the skb. The skb extensions are a common pattern and an easy and efficient way to hold private data travelling along with the skb. We only need the skb_ext_add() and skb_ext_find() functions to allocate and access CAN specific content as the skb helpers to copy/clone/free skbs automatically take care of skb extensions and their final removal. This patch introduces the complete CAN skb extensions infrastructure: - add struct can_skb_ext in new file include/net/can.h - add include/net/can.h in MAINTAINERS - add SKB_EXT_CAN to skbuff.c and skbuff.h - select SKB_EXTENSIONS in Kconfig when CONFIG_CAN is enabled - check for existing CAN skb extensions in can_rcv() in af_can.c - add CAN skb extensions allocation at every skb_alloc() location - duplicate the skb extensions if cloning outgoing skbs (framelen/gw_hops) - introduce can_skb_ext_add() and can_skb_ext_find() helpers The patch also corrects an indention issue in the original code from 2018: Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202602010426.PnGrYAk3-lkp@intel.com/ Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://patch.msgid.link/20260201-can_skb_ext-v8-2-3635d790fe8b@hartkopp.net Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Oliver Hartkopp
|
d4fb6514ff |
can: use skb hash instead of private variable in headroom
The can_skb_priv::skbcnt variable is used to identify CAN skbs in the RX path analogue to the skb->hash. As the skb hash is not filled in CAN skbs move the private skbcnt value to skb->hash and set skb->sw_hash accordingly. The skb->hash is a value used for RPS to identify skbs. Use it as intended. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://patch.msgid.link/20260201-can_skb_ext-v8-1-3635d790fe8b@hartkopp.net Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Tetsuo Handa
|
1809c82aa0 |
net: can: j1939: j1939_xtp_rx_rts_session_active(): deactivate session upon receiving the second rts
Since j1939_session_deactivate_activate_next() in j1939_tp_rxtimer() is
called only when the timer is enabled, we need to call
j1939_session_deactivate_activate_next() if we cancelled the timer.
Otherwise, refcount for j1939_session leaks, which will later appear as
| unregister_netdevice: waiting for vcan0 to become free. Usage count = 2.
problem.
Reported-by: syzbot <syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=881d65229ca4f9ae8c84
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Fixes:
|
||
|
Oliver Hartkopp
|
faba5860fc |
can: raw: instantly reject disabled CAN frames
For real CAN interfaces the CAN_CTRLMODE_FD and CAN_CTRLMODE_XL control
modes indicate whether an interface can handle those CAN FD/XL frames.
In the case a CAN XL interface is configured in CANXL-only mode with
disabled error-signalling neither CAN CC nor CAN FD frames can be sent.
The checks are now performed on CAN_RAW sockets to give an instant feedback
to the user when writing unsupported CAN frames to the interface or when
the CAN interface is in read-only mode.
Fixes:
|
||
|
Oliver Hartkopp
|
4650ff58a1 |
Revert "can: raw: instantly reject unsupported CAN frames"
This reverts commit |
||
|
Tetsuo Handa
|
46cea215dc |
can: j1939: make j1939_sk_bind() fail if device is no longer registered
There is a theoretical race window in j1939_sk_netdev_event_unregister()
where two j1939_sk_bind() calls jump in between read_unlock_bh() and
lock_sock().
The assumption jsk->priv == priv can fail if the first j1939_sk_bind()
call once made jsk->priv == NULL due to failed j1939_local_ecu_get() call
and the second j1939_sk_bind() call again made jsk->priv != NULL due to
successful j1939_local_ecu_get() call.
Since the socket lock is held by both j1939_sk_netdev_event_unregister()
and j1939_sk_bind(), checking ndev->reg_state with the socket lock held can
reliably make the second j1939_sk_bind() call fail (and close this race
window).
Fixes:
|
||
|
Tetsuo Handa
|
5d5602236f |
can: j1939: make j1939_session_activate() fail if device is no longer registered
syzbot is still reporting
unregister_netdevice: waiting for vcan0 to become free. Usage count = 2
even after commit
|
||
|
Arnd Bergmann
|
6abd4577bc |
can: fix build dependency
A recent bugfix introduced a new problem with Kconfig dependencies:
WARNING: unmet direct dependencies detected for CAN_DEV
Depends on [n]: NETDEVICES [=n] && CAN [=m]
Selected by [m]:
- CAN [=m] && NET [=y]
Since the CAN core code now links into the CAN device code, that
particular function needs to be available, though the rest of it
does not.
Revert the incomplete fix and instead use Makefile logic to avoid
the link failure.
Fixes:
|
||
|
Oliver Hartkopp
|
cb2dc6d286 |
can: Kconfig: select CAN driver infrastructure by default
The CAN bus support enabled with CONFIG_CAN provides a socket-based
access to CAN interfaces. With the introduction of the latest CAN protocol
CAN XL additional configuration status information needs to be exposed to
the network layer than formerly provided by standard Linux network drivers.
This requires the CAN driver infrastructure to be selected by default.
As the CAN network layer can only operate on CAN interfaces anyway all
distributions and common default configs enable at least one CAN driver.
So selecting CONFIG_CAN_DEV when CONFIG_CAN is selected by the user has
no effect on established configurations but solves potential build issues
when CONFIG_CAN[_XXX]=y is set together with CANFIG_CAN_DEV=m
Fixes:
|
||
|
Oliver Hartkopp
|
1a620a7238 |
can: raw: instantly reject unsupported CAN frames
For real CAN interfaces the CAN_CTRLMODE_FD and CAN_CTRLMODE_XL control modes indicate whether an interface can handle those CAN FD/XL frames. In the case a CAN XL interface is configured in CANXL-only mode with disabled error-signalling neither CAN CC nor CAN FD frames can be sent. The checks are performed on CAN_RAW sockets to give an instant feedback to the user when writing unsupported CAN frames to the interface. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://patch.msgid.link/20251126-canxl-v8-16-e7e3eb74f889@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> |
||
|
Kees Cook
|
85cb0757d7 |
net: Convert proto_ops connect() callbacks to use sockaddr_unsized
Update all struct proto_ops connect() callback function prototypes from "struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the compiler about object sizes. Calls into struct proto handlers gain casts that will be removed in the struct proto conversion patch. No binary changes expected. Signed-off-by: Kees Cook <kees@kernel.org> Link: https://patch.msgid.link/20251104002617.2752303-3-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Kees Cook
|
0e50474fa5 |
net: Convert proto_ops bind() callbacks to use sockaddr_unsized
Update all struct proto_ops bind() callback function prototypes from "struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the compiler about object sizes. Calls into struct proto handlers gain casts that will be removed in the struct proto conversion patch. No binary changes expected. Signed-off-by: Kees Cook <kees@kernel.org> Link: https://patch.msgid.link/20251104002617.2752303-2-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Tetsuo Handa
|
93a27b5891 |
can: j1939: add missing calls in NETDEV_UNREGISTER notification handler
Currently NETDEV_UNREGISTER event handler is not calling
j1939_cancel_active_session() and j1939_sk_queue_drop_all().
This will result in these calls being skipped when j1939_sk_release() is
called. And I guess that the reason syzbot is still reporting
unregister_netdevice: waiting for vcan0 to become free. Usage count = 2
is caused by lack of these calls.
Calling j1939_cancel_active_session(priv, sk) from j1939_sk_release() can
be covered by calling j1939_cancel_active_session(priv, NULL) from
j1939_netdev_notify().
Calling j1939_sk_queue_drop_all() from j1939_sk_release() can be covered
by calling j1939_sk_netdev_event_netdown() from j1939_netdev_notify().
Therefore, we can reuse j1939_cancel_active_session(priv, NULL) and
j1939_sk_netdev_event_netdown(priv) for NETDEV_UNREGISTER event handler.
Fixes:
|
||
|
Vincent Mailhol
|
c67732d067 |
can: annotate mtu accesses with READ_ONCE()
As hinted in commit
|
||
|
Vincent Mailhol
|
a146cfaaa0 |
can: raw: reorder struct raw_sock's members to optimise packing
struct raw_sock has several holes. Reorder the fields to save 8 bytes.
Statistics before:
$ pahole --class_name=raw_sock net/can/raw.o
struct raw_sock {
struct sock sk __attribute__((__aligned__(8))); /* 0 776 */
/* XXX last struct has 1 bit hole */
/* --- cacheline 12 boundary (768 bytes) was 8 bytes ago --- */
int ifindex; /* 776 4 */
/* XXX 4 bytes hole, try to pack */
struct net_device * dev; /* 784 8 */
netdevice_tracker dev_tracker; /* 792 0 */
struct list_head notifier; /* 792 16 */
unsigned int bound:1; /* 808: 0 4 */
unsigned int loopback:1; /* 808: 1 4 */
unsigned int recv_own_msgs:1; /* 808: 2 4 */
unsigned int fd_frames:1; /* 808: 3 4 */
unsigned int xl_frames:1; /* 808: 4 4 */
unsigned int join_filters:1; /* 808: 5 4 */
/* XXX 2 bits hole, try to pack */
/* Bitfield combined with next fields */
struct can_raw_vcid_options raw_vcid_opts; /* 809 4 */
/* XXX 3 bytes hole, try to pack */
canid_t tx_vcid_shifted; /* 816 4 */
canid_t rx_vcid_shifted; /* 820 4 */
canid_t rx_vcid_mask_shifted; /* 824 4 */
int count; /* 828 4 */
/* --- cacheline 13 boundary (832 bytes) --- */
struct can_filter dfilter; /* 832 8 */
struct can_filter * filter; /* 840 8 */
can_err_mask_t err_mask; /* 848 4 */
/* XXX 4 bytes hole, try to pack */
struct uniqframe * uniq; /* 856 8 */
/* size: 864, cachelines: 14, members: 20 */
/* sum members: 852, holes: 3, sum holes: 11 */
/* sum bitfield members: 6 bits, bit holes: 1, sum bit holes: 2 bits */
/* member types with bit holes: 1, total: 1 */
/* forced alignments: 1 */
/* last cacheline: 32 bytes */
} __attribute__((__aligned__(8)));
...and after:
$ pahole --class_name=raw_sock net/can/raw.o
struct raw_sock {
struct sock sk __attribute__((__aligned__(8))); /* 0 776 */
/* XXX last struct has 1 bit hole */
/* --- cacheline 12 boundary (768 bytes) was 8 bytes ago --- */
struct net_device * dev; /* 776 8 */
netdevice_tracker dev_tracker; /* 784 0 */
struct list_head notifier; /* 784 16 */
int ifindex; /* 800 4 */
unsigned int bound:1; /* 804: 0 4 */
unsigned int loopback:1; /* 804: 1 4 */
unsigned int recv_own_msgs:1; /* 804: 2 4 */
unsigned int fd_frames:1; /* 804: 3 4 */
unsigned int xl_frames:1; /* 804: 4 4 */
unsigned int join_filters:1; /* 804: 5 4 */
/* XXX 2 bits hole, try to pack */
/* Bitfield combined with next fields */
struct can_raw_vcid_options raw_vcid_opts; /* 805 4 */
/* XXX 3 bytes hole, try to pack */
canid_t tx_vcid_shifted; /* 812 4 */
canid_t rx_vcid_shifted; /* 816 4 */
canid_t rx_vcid_mask_shifted; /* 820 4 */
can_err_mask_t err_mask; /* 824 4 */
int count; /* 828 4 */
/* --- cacheline 13 boundary (832 bytes) --- */
struct can_filter dfilter; /* 832 8 */
struct can_filter * filter; /* 840 8 */
struct uniqframe * uniq; /* 848 8 */
/* size: 856, cachelines: 14, members: 20 */
/* sum members: 852, holes: 1, sum holes: 3 */
/* sum bitfield members: 6 bits, bit holes: 1, sum bit holes: 2 bits */
/* member types with bit holes: 1, total: 1 */
/* forced alignments: 1 */
/* last cacheline: 24 bytes */
} __attribute__((__aligned__(8)));
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250917-can-raw-repack-v2-3-395e8b3a4437@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
||
|
Vincent Mailhol
|
890e5198a6 |
can: raw: use bitfields to store flags in struct raw_sock
The bound, loopback, recv_own_msgs, fd_frames, xl_frames and
join_filters fields of struct raw_sock just need to store one bit of
information.
Declare all those members as a bitfields of type unsigned int and
width one bit.
Add a temporary variable to raw_setsockopt() and raw_getsockopt() to
make the conversion between the stored bits and the socket interface.
This reduces the size of struct raw_sock by sixteen bytes.
Statistics before:
$ pahole --class_name=raw_sock net/can/raw.o
struct raw_sock {
struct sock sk __attribute__((__aligned__(8))); /* 0 776 */
/* XXX last struct has 1 bit hole */
/* --- cacheline 12 boundary (768 bytes) was 8 bytes ago --- */
int bound; /* 776 4 */
int ifindex; /* 780 4 */
struct net_device * dev; /* 784 8 */
netdevice_tracker dev_tracker; /* 792 0 */
struct list_head notifier; /* 792 16 */
int loopback; /* 808 4 */
int recv_own_msgs; /* 812 4 */
int fd_frames; /* 816 4 */
int xl_frames; /* 820 4 */
struct can_raw_vcid_options raw_vcid_opts; /* 824 4 */
canid_t tx_vcid_shifted; /* 828 4 */
/* --- cacheline 13 boundary (832 bytes) --- */
canid_t rx_vcid_shifted; /* 832 4 */
canid_t rx_vcid_mask_shifted; /* 836 4 */
int join_filters; /* 840 4 */
int count; /* 844 4 */
struct can_filter dfilter; /* 848 8 */
struct can_filter * filter; /* 856 8 */
can_err_mask_t err_mask; /* 864 4 */
/* XXX 4 bytes hole, try to pack */
struct uniqframe * uniq; /* 872 8 */
/* size: 880, cachelines: 14, members: 20 */
/* sum members: 876, holes: 1, sum holes: 4 */
/* member types with bit holes: 1, total: 1 */
/* forced alignments: 1 */
/* last cacheline: 48 bytes */
} __attribute__((__aligned__(8)));
...and after:
$ pahole --class_name=raw_sock net/can/raw.o
struct raw_sock {
struct sock sk __attribute__((__aligned__(8))); /* 0 776 */
/* XXX last struct has 1 bit hole */
/* --- cacheline 12 boundary (768 bytes) was 8 bytes ago --- */
int ifindex; /* 776 4 */
/* XXX 4 bytes hole, try to pack */
struct net_device * dev; /* 784 8 */
netdevice_tracker dev_tracker; /* 792 0 */
struct list_head notifier; /* 792 16 */
unsigned int bound:1; /* 808: 0 4 */
unsigned int loopback:1; /* 808: 1 4 */
unsigned int recv_own_msgs:1; /* 808: 2 4 */
unsigned int fd_frames:1; /* 808: 3 4 */
unsigned int xl_frames:1; /* 808: 4 4 */
unsigned int join_filters:1; /* 808: 5 4 */
/* XXX 2 bits hole, try to pack */
/* Bitfield combined with next fields */
struct can_raw_vcid_options raw_vcid_opts; /* 809 4 */
/* XXX 3 bytes hole, try to pack */
canid_t tx_vcid_shifted; /* 816 4 */
canid_t rx_vcid_shifted; /* 820 4 */
canid_t rx_vcid_mask_shifted; /* 824 4 */
int count; /* 828 4 */
/* --- cacheline 13 boundary (832 bytes) --- */
struct can_filter dfilter; /* 832 8 */
struct can_filter * filter; /* 840 8 */
can_err_mask_t err_mask; /* 848 4 */
/* XXX 4 bytes hole, try to pack */
struct uniqframe * uniq; /* 856 8 */
/* size: 864, cachelines: 14, members: 20 */
/* sum members: 852, holes: 3, sum holes: 11 */
/* sum bitfield members: 6 bits, bit holes: 1, sum bit holes: 2 bits */
/* member types with bit holes: 1, total: 1 */
/* forced alignments: 1 */
/* last cacheline: 32 bytes */
} __attribute__((__aligned__(8)));
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250917-can-raw-repack-v2-2-395e8b3a4437@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
||
|
Vincent Mailhol
|
fc8418eca4 |
can: raw: reorder struct uniqframe's members to optimise packing
struct uniqframe has one hole. Reorder the fields to save 8 bytes.
Statistics before:
$ pahole --class_name=uniqframe net/can/raw.o
struct uniqframe {
int skbcnt; /* 0 4 */
/* XXX 4 bytes hole, try to pack */
const struct sk_buff * skb; /* 8 8 */
unsigned int join_rx_count; /* 16 4 */
/* size: 24, cachelines: 1, members: 3 */
/* sum members: 16, holes: 1, sum holes: 4 */
/* padding: 4 */
/* last cacheline: 24 bytes */
};
...and after:
$ pahole --class_name=uniqframe net/can/raw.o
struct uniqframe {
const struct sk_buff * skb; /* 0 8 */
int skbcnt; /* 8 4 */
unsigned int join_rx_count; /* 12 4 */
/* size: 16, cachelines: 1, members: 3 */
/* last cacheline: 16 bytes */
};
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250917-can-raw-repack-v2-1-395e8b3a4437@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|